What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 90 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 90 of 108

5120-99-977-0536
Jaw

999770536
7490-4602: RNCC: 3 | RNVC: 2
7490-4602: RNCC: 5 | RNVC: 2
7490-4602: RNCC: 5 | RNVC: 2
7490-4602: RNCC: 5 | RNVC: 9
1C8475: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6379
Socket Wrench Socket

999106379
BS4006-1-9/16A/F: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4507: RNCC: 6 | RNVC: 9
TABLE I(D) 1-9/16A/F: RNCC: 6 | RNVC: 9
1L125: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-238-1160
Socket Wrench Socket

992381160
NMT-162: RNCC: 3 | RNVC: 2
NMT162: RNCC: 5 | RNVC: 2

26 Nov 1998

5120-99-667-7458
Hand Terminal Crimping Tool

996677458
63819-0300: RNCC: 3 | RNVC: 2
1666053: RNCC: 5 | RNVC: 2
12P9132: RNCC: 5 | RNVC: 2
SPCISR/04-WIP/1/2/148/5/3: RNCC: 6 | RNVC: 9

25 Oct 2010

5120-99-010-4538
Craftsman's Tweezers

990104538
020315: RNCC: 3 | RNVC: 2
D/SSC/ME235/464/18/2: RNCC: 6 | RNVC: 9

28 Jun 1993

5120-99-332-3725

5120-99-317-6002
Bush

5120-99-328-8596
Pliers

5120-99-051-6629
Torque Wrench Adapter

990516629
MBEU-64344: RNCC: 3 | RNVC: 2
MBEU64344: RNCC: 6 | RNVC: 9

7 May 1993

5120-99-444-1673

5120-99-118-7409
Spanner Wrench

991187409
FITT-A68.5CS: RNCC: 3 | RNVC: 2
FITT-A68.5CS: RNCC: 5 | RNVC: 2
B13524/0: RNCC: 5 | RNVC: 2
FH982SR0005: RNCC: 6 | RNVC: 9

19 Nov 1998

5120-99-558-4018
Spanner Wrench

995584018
C5249-3: RNCC: 3 | RNVC: 2
309: RNCC: 5 | RNVC: 2
H838-356261: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-467-4371
Seal Assembly Tool

994674371
460001226: RNCC: 3 | RNVC: 2
460001-226: RNCC: 5 | RNVC: 2
27Q24582: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-763-0526
Wrench Spanner

997630526
J-31083-407: RNCC: 3 | RNVC: 2
B/J-31083-407: RNCC: 5 | RNVC: 2
J31083-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-104-1143
Screwdriver Bit

991041143
HTS 3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-837-5204
Installation Tool

998375204
210715: RNCC: 3 | RNVC: 2
FJ970690001: RNCC: 6 | RNVC: 9

14 Mar 1997

5120-99-882-0100
Special Screwdriver

998820100
3300T000: RNCC: 3 | RNVC: 2

15 Oct 1999

5120-99-209-7862
Valve Kit

992097862
U34X8: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-119-8393

5120-99-602-1468
Flaring Set Adaptor

996021468
99-98: RNCC: 3 | RNVC: 2
FL963G80014: RNCC: 6 | RNVC: 9

26 Sep 1996

5120-99-944-1485
Spanner Wrench

999441485
2Z138874-18: RNCC: 3 | RNVC: 2
BKB2543-5: RNCC: 5 | RNVC: 2
2CZ138874-18: RNCC: 5 | RNVC: 2
558-2-00577-016: RNCC: 5 | RNVC: 2
K678-678311: RNCC: 6 | RNVC: 9
1H238: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-219-8038
Spanner

992198038
72719-00: RNCC: 3 | RNVC: 2
SR1575/8: RNCC: 5 | RNVC: 2
D0006-95/8: RNCC: 6 | RNVC: 9

19 Nov 1997

5120-99-510-5978
Combination Box And Open End Wrench

995105978
48615: RNCC: 3 | RNVC: 2
1RM-24: RNCC: 3 | RNVC: 2
KEN-582-2179K: RNCC: 3 | RNVC: 2
RRJM24: RNCC: 3 | RNVC: 2
RCW24: RNCC: 3 | RNVC: 2
9624: RNCC: 3 | RNVC: 9
26680-198: RNCC: 7 | RNVC: 2

30 Nov 2010

5120-99-301-4249
Guide

993014249
LRT-12-035: RNCC: 3 | RNVC: 2
RO.270304A: RNCC: 5 | RNVC: 9

18 Aug 1995

5120-99-553-8029
Blind Riveter Nosepiece

995538029
DPM400-B08: RNCC: 3 | RNVC: 2
METS/10/9/019: RNCC: 5 | RNVC: 1

8 Jan 2013

5120-99-740-1185
Spanner Wrench

997401185
ZJEF021099SST-ITEM-066: RNCC: 3 | RNVC: 2

30 Nov 2012

5120-99-429-4395
Glandnut Spanner

994294395
NO PRIMARY REF 99-429-4395: RNCC: 3 | RNVC: 2
UCW6400-58: RNCC: 5 | RNVC: 2
603803: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-205-8298
Pump Link Assembly

992058298
GM-B-54492: RNCC: 3 | RNVC: 2
GMB54492: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-7823
Tinman Groove Punch

999107823
H2910: RNCC: 2 | RNVC: 2
102-1/4: RNCC: 3 | RNVC: 2
102: RNCC: 5 | RNVC: 1
F1FA1817: RNCC: 6 | RNVC: 9
1B2883: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-153-1761
Pliers

991531761
N 5730 154: RNCC: 3 | RNVC: 2

28 Jan 1999

5120-99-130-0383
Crimping To Locator

991300383
604659-1: RNCC: 3 | RNVC: 2
1H402: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-960-4307
Spanner Wrench

999604307
CM1250: RNCC: 3 | RNVC: 2
CM1250: RNCC: 5 | RNVC: 2
N1CM1250: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-906-7725
Reamer Bush

999067725
R.2199: RNCC: 3 | RNVC: 2
3AP5204: RNCC: 6 | RNVC: 9

10 Aug 1993

5120-99-459-0782
Support Pad

994590782
GU15942: RNCC: 3 | RNVC: 2
64VV3411: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-880-6924
Pliers Wrench

998806924
43793: RNCC: 3 | RNVC: 2
43793: RNCC: 5 | RNVC: 2
FL990II0270: RNCC: 6 | RNVC: 9

5 May 1999

5120-99-826-3009
Extractor

998263009
VT11102: RNCC: 3 | RNVC: 2

10 Aug 1987

5120-99-907-9125
Face S Fitting Tool

999079125
FITT-H18SPL: RNCC: 3 | RNVC: 2

14 Dec 1998

5120-99-711-6180

5120-99-923-8143
Open End Wrench

999238143
0SW207: RNCC: 3 | RNVC: 2
1C3219: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5976
Box Wrench

999105976
4241: RNCC: 3 | RNVC: 2
BS3555: RNCC: 4 | RNVC: 1
T2AH1182: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-836-3999
Removal Tool

998363999
110079-15547: RNCC: 3 | RNVC: 2
26VC-95876: RNCC: 6 | RNVC: 9

26 Feb 2002

5120-99-580-5393
Screw Thread Insert Inserter

995805393
A29-10: RNCC: 3 | RNVC: 2
H21465: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-769-1460
Special Box Wrench

997691460
322700: RNCC: 3 | RNVC: 2
322700: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-725-1107
Open End Wrench

997251107
012060: RNCC: 3 | RNVC: 2

29 Jun 2001

5120-99-910-4598
Mag Retrieving Tool

999104598
H5598: RNCC: 3 | RNVC: 2
1A4415: RNCC: 6 | RNVC: 9
F1FA13675: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4756
Spade Shovel Handle

999104756
BS3388PT1: RNCC: 4 | RNVC: 1
1C3210: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-7968
Open End Wrench

999107968
BS2583: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-324-3184
Torque Wrench Adapter

993243184
DRT 68194: RNCC: 3 | RNVC: 2

3 Jun 2009

5120-99-024-7083
Attachment Spanner

990247083
905.0.15.003.1: RNCC: 3 | RNVC: 2
905.0.15.003.1: RNCC: 5 | RNVC: 2
FH970AB0012: RNCC: 6 | RNVC: 9

19 Sep 1997

5120-99-738-6016
Ex Grinding Fixture

997386016
35831M4: RNCC: 3 | RNVC: 2
H35831M4/A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-659-6398
Face Spanner Wrench Socket

996596398
55061A2/405: RNCC: 3 | RNVC: 2
55061A2-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-654-2967
Extraction Tool

996542967
P-890146-001: RNCC: 3 | RNVC: 2
P890146-001: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-734-7063
Nut Spinner

997347063
CK433A-8BA: RNCC: 3 | RNVC: 2
H02321: RNCC: 5 | RNVC: 2

3 Jul 1985

5120-99-910-6612
Pipe Vise

999106612
H2978: RNCC: 2 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H2978: RNCC: 6 | RNVC: 9
F1FA19547: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-867-0048
Flange Extractor

998670048
EA6305G645-041: RNCC: 3 | RNVC: 2
1MEV5DZ: RNCC: 6 | RNVC: 9

26 Nov 1999

5120-99-734-0163
Seal Inserter

997340163
453-7408-182: RNCC: 3 | RNVC: 2
21-069: RNCC: 5 | RNVC: 2
21-069: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-429-4387
Blanking Pl Spanner

994294387
NO PRIMARY REF 99-429-4387: RNCC: 3 | RNVC: 2
6631-1: RNCC: 5 | RNVC: 2
603400: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-717-6469
Pliers

997176469
61: RNCC: 3 | RNVC: 1
11061: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-715-4284
Leveling-Support Jack

997154284
3AB6922: RNCC: 3 | RNVC: 2

3 Aug 1979

5120-99-139-7769
Oil Seal Bumper

991397769
0485180: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-998-2548
Spanner Wrench

999982548
MBEU192466: RNCC: 3 | RNVC: 2
128GF-007: RNCC: 6 | RNVC: 9

5120-99-726-0180
Connector Opening A

997260180
101003-6110-000: RNCC: 3 | RNVC: 2
WE124B2: RNCC: 6 | RNVC: 9

28 Oct 1997

5120-99-711-6521
Box Spanner Set

997116521
NO PRIMARY REF 99-711-6521: RNCC: 3 | RNVC: 2
T5118-9: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-6191
Box Wrench

999106191
BS3555-TABLE 2 15/16X1-1/16A/F: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-807-3748
Spanner Wrench

5120-99-787-0752
File Cleaner Card

997870752
2016: RNCC: 3 | RNVC: 2
D00376: RNCC: 5 | RNVC: 2

24 Apr 1991

5120-99-957-9794
Remote Handlin Tool

999579794
SA100 A JAW: RNCC: 3 | RNVC: 2

3 Mar 2004

5120-99-127-5189
Cross Tip Screwdriver

991275189
DEF STAN 51-11 (PART 16): RNCC: 4 | RNVC: 1
H6373: RNCC: 5 | RNVC: 2
64-600: RNCC: 5 | RNVC: 2
145-112: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-828-8965
Maintenance Fixture

5120-99-829-4280

5120-99-829-4273
Crankshaft Front O1

5120-99-827-9632

5120-99-748-0518
Screwdriver Bit

5120-99-743-3786

5120-99-527-2397

5120-99-831-8110
Support Cradle

998318110
FV811916: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-527-7401

5120-99-556-4009

5120-99-866-9664
Bevel Gear Adaptor

998669664
5F9886: RNCC: 3 | RNVC: 2
LV8RECP5F9886: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-826-9481
Bearing And Driver

998269481
VT13454: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-934-6412
Socket Head Screw Key

999346412
A10607: RNCC: 3 | RNVC: 2
5028: RNCC: 5 | RNVC: 2

14 Mar 1992

5120-99-758-1603

5120-99-001-1966
Torque Wrench Adapter

990011966
JA6082: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-146-2857
Spanner Wrench

991462857
S6170-10010: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-324-0036
Inspection Mirror Head

993240036
SE001000: RNCC: 3 | RNVC: 2
SM-140-C: RNCC: 5 | RNVC: 2

9 Apr 2002

5120-99-423-0706
Tommy Bar

994230706
SK1188-125Z3: RNCC: 3 | RNVC: 2
4Q2462: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-481-9664
Hydraulic Jack Handle

994819664
955309: RNCC: 3 | RNVC: 2
052ND-004: RNCC: 6 | RNVC: 9

1 Aug 2005

5120-99-333-6201
Seal Inserter

993336201
90890-01502: RNCC: 3 | RNVC: 2
90890-01502: RNCC: 5 | RNVC: 2

1 Jul 2013

5120-99-117-4757
C Clamp

991174757
10330-103: RNCC: 3 | RNVC: 2
10330-103: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-131-7857
Rivnut Wrench Tool

991317857
J261: RNCC: 3 | RNVC: 2
FV 732229 SHT2: RNCC: 6 | RNVC: 9

7 Jul 1998

5120-99-729-8228
Vee Belt Tool

5120-99-714-3974

5120-99-715-9519
Removal Tool

5120-99-717-4576
Extractor Assembly

5120-99-702-5816
Spanner Wrench

5120-99-732-3454

5120-99-401-3595
Hydraulic Pulle Leg

994013595
NO PRIMARY REF 99-401-3595: RNCC: 3 | RNVC: 2
151B: RNCC: 5 | RNVC: 2
DLEG: RNCC: 5 | RNVC: 2
16C6164: RNCC: 6 | RNVC: 9

5 Sep 1979

5120-99-761-3729
Socket Head Screw Key

997613729
R461/134 ITEM NUMBER 60: RNCC: 3 | RNVC: 2
H727-460417: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4805
Wood Caulking Iron

999104805
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
9104805: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H1442: RNCC: 6 | RNVC: 9
H1442: RNCC: 6 | RNVC: 9
FA14695: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-811-6694
Socket

998116694
NO PRIMARY REF 99-811-6694: RNCC: 3 | RNVC: 2
5S9568: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-376-1698
Drift Pin Set

993761698
PB.249G: RNCC: 3 | RNVC: 2
220-0662: RNCC: 5 | RNVC: 2

13 Apr 2000

5120-99-642-7367
Reel Jack

996427367
NO PRIMARY REF 99-642-7367: RNCC: 3 | RNVC: 2
320B: RNCC: 5 | RNVC: 2
320B: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-817-1229
Wheel Nut Wrench

998171229
RAW27: RNCC: 3 | RNVC: 2
NTC7829: RNCC: 5 | RNVC: 2
A1/NRC1315: RNCC: 5 | RNVC: 9
NRC1315: RNCC: 5 | RNVC: 9
569687: RNCC: 6 | RNVC: 9
(241)AE095NTC7829: RNCC: 8 | RNVC: 2
NTC 7829: RNCC: 8 | RNVC: 2
NTC7829: RNCC: 8 | RNVC: 2

25 Apr 1991

5120-99-539-0487
Double Peg Wrench

995390487
1D1916-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-382-5171
Ratchet Wrench

993825171
4: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-525-8465
Spanner Wrench

995258465
1023-82-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-663-5434
Manual Release Tool

996635434
3-0WE-211082: RNCC: 3 | RNVC: 2
AP110G-0630-123: RNCC: 6 | RNVC: 9

1 Nov 1996

5120-99-821-1517
Ha Housing Assembly

998211517
MBEU57082: RNCC: 3 | RNVC: 2

25 Aug 1995

5120-99-910-4668
Hammer Face

999104668
H5631: RNCC: 3 | RNVC: 2
1B5227: RNCC: 6 | RNVC: 9
FA14164: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-700-7845
Lifting Tool

997007845
537176-81: RNCC: 3 | RNVC: 2
537176: RNCC: 5 | RNVC: 1
537176: RNCC: 5 | RNVC: 1
537176-81: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-411-8970
Extractor

994118970
NO PRIMARY REF 99-411-8970: RNCC: 3 | RNVC: 2
ST1977: RNCC: 5 | RNVC: 9
27Q13571: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-458-8009
Extractor

994588009
EA6305G530-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-758-3959
Spanner Wrench

997583959
T7063-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-748-7483
Socket Wrench Extension

997487483
48415A53-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-3641
Socket Assembly

991363641
66-DZ-64: RNCC: 3 | RNVC: 2
678-941308: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-460-3946
Peg Spanner

994603946
NO PRIMARY REF 99-460-3946: RNCC: 3 | RNVC: 2
T86591: RNCC: 5 | RNVC: 2
64DE161: RNCC: 6 | RNVC: 9
64DE161: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-146-2822
Pedal Removal Tool

991462822
S6170-65009: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-530-0399
Socket Wrench Socket

995300399
47-1-9-000595: RNCC: 3 | RNVC: 2
4719000595: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-451-0234
Extractor

994510234
558-1-02548T336909: RNCC: 3 | RNVC: 2
5W6409: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-733-5688
Contact Remova Tool

997335688
TMC16RT008: RNCC: 3 | RNVC: 2
1033291-6: RNCC: 5 | RNVC: 2
TMC-16-RT-008: RNCC: 6 | RNVC: 9
TMC16RT008: RNCC: 6 | RNVC: 9
1H/1376: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-1401
Jackscrew Assembly

996661401
EA6305G638-053: RNCC: 3 | RNVC: 2

16 Apr 2004

5120-99-783-8653

5120-99-742-9414
Socket Wren Adapter

5120-99-051-5398
Nut Spinner

5120-99-138-6289
Ratchet Wrench

5120-99-750-7895
Screwdriver Bit

997507895
440-TX07: RNCC: 3 | RNVC: 2
440-TX07: RNCC: 5 | RNVC: 2
1C/8628: RNCC: 6 | RNVC: 9
440-TX-7: RNCC: 6 | RNVC: 9
440-TX-07: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-803-0276
Socket Wrench Handle Bar

998030276
FV232639: RNCC: 3 | RNVC: 2
LV6MT278240: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-527-7760
Screwdriver Bit

995277760
B33372-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-137-9845
Free Plug Or S Tool

991379845
50G60023: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-125-7470
Inflating-Defl Pump

5120-99-723-4980

5120-99-768-2985

5120-99-544-8347

5120-99-151-1940
Tommy Bar

5120-99-194-1958

5120-99-710-7218
Open End Wrench

5120-99-482-0502
Seat Lapping Tool A

994820502
00832/AS/035949: RNCC: 3 | RNVC: 2
00832/GA/035933 ITEM 15: RNCC: 5 | RNVC: 2
00832/GA/035933/15: RNCC: 5 | RNVC: 2

25 Aug 2000

5120-99-556-8019
Socket Wrench Handle Bar

995568019
1463/32: RNCC: 3 | RNVC: 2
H152-975889: RNCC: 6 | RNVC: 9
152-975889: RNCC: 6 | RNVC: 9
LE463B1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-6860
Plate

998106860
NO PRIMARY REF 99-810-6860: RNCC: 3 | RNVC: 2
5F5096: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-619-5776
Socket Wrench Socket

996195776
UT 223: RNCC: 3 | RNVC: 2
C26-64: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-981-6584
Tension Link Tool

999816584
EA6405G537-041: RNCC: 3 | RNVC: 2
112DJ-005: RNCC: 6 | RNVC: 9

23 Mar 2011

5120-99-910-5884
Flat Tip Screwdriver

999105884
DEFSTAN51-11 PART 17: RNCC: 4 | RNVC: 1
H20011: RNCC: 5 | RNVC: 2
H5202: RNCC: 5 | RNVC: 2
DEF1191: RNCC: 5 | RNVC: 9
DEF1191-H5202: RNCC: 5 | RNVC: 9
H5202: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-5030
Socket Wrench Screwdriver Attachment

991365030
E33-17M: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 26: RNCC: 4 | RNVC: 1
H6858: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-558-8330
Socket Wrench Handle Bar

995588330
954061TEM10: RNCC: 3 | RNVC: 2
95406-10: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-782-1105
Open End Wrench

997821105
0A4248: RNCC: 3 | RNVC: 2
H02379: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-281-4100
Hand Hammer

992814100
12-712N: RNCC: 3 | RNVC: 2
0540R-002: RNCC: 6 | RNVC: 9

9 Dec 2005

5120-99-307-1723
Mechanical Puller

993071723
NO PRIMARY REF 99-307-1723: RNCC: 3 | RNVC: 2
FD1226A: RNCC: 5 | RNVC: 2
420-071723: RNCC: 6 | RNVC: 9
W20B3-18553: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-242-9099
Switch Operati Tool

992429099
CSDE/TORN/GSS/154: RNCC: 3 | RNVC: 2
CSDE/TORN/GSS/154: RNCC: 6 | RNVC: 9
TORNADO-9061: RNCC: 6 | RNVC: 9

19 Oct 2004

5120-99-748-1094
Socket Wrench Handle Bar

997481094
P-890614-003: RNCC: 3 | RNVC: 2
P890614-003: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-910-6564
Blacksmiths' Tongs

999106564
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2794: RNCC: 6 | RNVC: 9
H2794: RNCC: 6 | RNVC: 9
1C2447: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-4629
Open End Wrench

994224629
N37278-11: RNCC: 3 | RNVC: 2
88604-606-058: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-178-5079
Pry Bar

991785079
NO PRIMARY REF 99-178-5079: RNCC: 3 | RNVC: 2
KEN-505-8250K: RNCC: 5 | RNVC: 2
PN00001899: RNCC: 5 | RNVC: 2

8 Jan 2008

5120-99-417-1023

5120-99-422-4640
Brake Release Tool

994224640
NO PRIMARY REF 99-422-4640: RNCC: 3 | RNVC: 2
N37279-20: RNCC: 5 | RNVC: 9
88604-606-069: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-609-1661
Torque Wrench Adapter

996091661
NTS10916-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-737-3621
Wrench

997373621
WTD.271157-8: RNCC: 3 | RNVC: 2
TD271157-8: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-143-0289
Special Spanner

991430289
NO PRIMARY REF 99-143-0289: RNCC: 3 | RNVC: 2
110079SHT3177: RNCC: 5 | RNVC: 2
110079SH3177: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-212-4381
Hand Tool

992124381
STD419C/62Y: RNCC: 3 | RNVC: 2
26DL-95965: RNCC: 6 | RNVC: 9

20 Jun 2002

5120-99-799-2702
Spanner Wrench

997992702
013010092/18/102: RNCC: 3 | RNVC: 2
013010092/18 ITEM 102: RNCC: 5 | RNVC: 2
42.M.173.OR.0092/18 ITEM 102: RNCC: 5 | RNVC: 2
42.M.173.OR.0092/18/102: RNCC: 5 | RNVC: 2
S42.M.173.OT.0092/18 ITEM 102: RNCC: 5 | RNVC: 2
S42.M.173.OT.0092/18/102: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-962-5078
Spanner Wrench

999625078
GR6582-9: RNCC: 3 | RNVC: 2
88610-609-995: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-761-3715
Socket Wrench Handle

997613715
P461S1038: RNCC: 3 | RNVC: 2
11/P461S1038: RNCC: 5 | RNVC: 2
T.736/16/1: RNCC: 5 | RNVC: 2
H727-460318: RNCC: 6 | RNVC: 9
5120-99-832-9568: RNCC: 6 | RNVC: 9
993279681: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-8408
Socket Wrench Socket

991208408
DH266: RNCC: 3 | RNVC: 2
BS4006: RNCC: 4 | RNVC: 1
H21388: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6290: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-438-5873

5120-99-442-3755
Leveling-Suppo Jack

5120-99-052-2241
Socket Head Screw Key

990522241
213759: RNCC: 3 | RNVC: 2
FG9802J8004: RNCC: 6 | RNVC: 9

27 Feb 1998

5120-99-915-4259
Flaring Set Adaptor

999154259
99-94: RNCC: 3 | RNVC: 2
FL963G80010: RNCC: 6 | RNVC: 9

26 Sep 1996

5120-99-659-4599
Spanner Wrench

996594599
83710077-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-556-0719
Ratchet Wrench

995560719
TX499330: RNCC: 3 | RNVC: 2
TX499330-1T07: RNCC: 5 | RNVC: 2
TX4993301TEM1T07: RNCC: 5 | RNVC: 2
123-956781: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-962-6383
Projec Holding Tool

999626383
NO PRIMARY REF 99-962-6383: RNCC: 3 | RNVC: 2
DDL10973: RNCC: 5 | RNVC: 2
UFL998A: RNCC: 6 | RNVC: 9

5 Sep 1979

5120-99-448-4497
Peg Spanner

994484497
NO PRIMARY REF 99-448-4497: RNCC: 3 | RNVC: 2
UL12331: RNCC: 5 | RNVC: 2
88633-617-053: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-490-8062
Mechanical Puller

994908062
EA6305G677-043: RNCC: 3 | RNVC: 2

7 Nov 2009

5120-99-923-8076

5120-99-930-7815
Single Ende Spanner

5120-99-977-1915

5120-99-127-9540
Box Wrench

5120-99-155-5827
Torque Wrench

991555827
18033.AUT: RNCC: 3 | RNVC: 2
PT 72/2000 AUT: RNCC: 5 | RNVC: 2

11 Mar 2011

5120-99-881-4503
Scavenging Device

998814503
NO PRIMARY REF 99-881-4503: RNCC: 3 | RNVC: 2
7044-427: RNCC: 5 | RNVC: 2
Z7044-427: RNCC: 5 | RNVC: 2
LV6MT12CB7044-427: RNCC: 6 | RNVC: 9
16C3620: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-657-4992
Socket Wrench Crowfoot Attachment

996574992
WG1388-0217-101: RNCC: 3 | RNVC: 2
85-690-1315: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-242-9154
Thre Anchor-Adaptor

992429154
A0/1010/12: RNCC: 3 | RNVC: 2
NPPOGAMA4B2060405: RNCC: 6 | RNVC: 9

5 Jul 2005

5120-99-769-3097
Track Zero Adj Tool

997693097
TL2857A01: RNCC: 3 | RNVC: 2
TL2857A01: RNCC: 7 | RNVC: 2

31 May 1995

5120-99-617-1773
Mechanical Puller

996171773
HU17353-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-468-0009
C Nut Spanner

994680009
BA24018: RNCC: 3 | RNVC: 2
37F12000: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-645-9212
Mechanical Puller

996459212
A0104438: RNCC: 3 | RNVC: 2
27G6263: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-144-6110
Assembly Post

991446110
460001551: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-726-4053
Socket Head Screw Key

997264053
H23031: RNCC: 1 | RNVC: 2
NDA050: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-728-6379
Socket Wrench Handle

997286379
H85: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-460-7845
Contact Positioner

994607845
K721: RNCC: 3 | RNVC: 2
K721: RNCC: 5 | RNVC: 2

14 Mar 1992

5120-99-726-1996
Seal Ring Expander

997261996
RO606602: RNCC: 3 | RNVC: 2
R0606602: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-739-3343
Pliers

997393343
7590DS: RNCC: 3 | RNVC: 2
7590AS: RNCC: 6 | RNVC: 9
7590DS: RNCC: 6 | RNVC: 9
7590DS: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-729-1392
Crowfoot Spanner

997291392
FV2031819: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-728-8976
Torque Wrench

997288976
100147-8960-ASY: RNCC: 3 | RNVC: 2
TSN 125: RNCC: 5 | RNVC: 1
011055 (TSN125): RNCC: 5 | RNVC: 2
TSN125(011040): RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-739-7814
Instrume Screwdrive

997397814
074.277.00: RNCC: 3 | RNVC: 2
074.093.00: RNCC: 5 | RNVC: 9

13 May 1998

5120-99-731-2146
Insertion Tool And

997312146
FV2077309: RNCC: 3 | RNVC: 2
AT60008: RNCC: 5 | RNVC: 2

14 Jul 1986

5120-99-739-5756
Seal Installer

997395756
VT18085: RNCC: 3 | RNVC: 2

3 Jun 1986

5120-99-756-7629
Socket Wrench Crowfoot Attachment

997567629
SCO52: RNCC: 3 | RNVC: 2
TA531: RNCC: 5 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-757-9362
Open End Wrench

997579362
558/2/09590/000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-497-2521
Gasket Fitting Tool

994972521
ATD 1174-001-009: RNCC: 3 | RNVC: 2

5 Aug 2008

5120-99-423-8213
Socket Wrench

994238213
TD449-21: RNCC: 3 | RNVC: 2
558158: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-6837
Combination Box And Open End Wrench

991386837
RJM6: RNCC: 3 | RNVC: 2
2484-9000-034: RNCC: 5 | RNVC: 2
436-9151: RNCC: 5 | RNVC: 2
436-9151: RNCC: 5 | RNVC: 2
150-318: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-733-9689
Pin Straightener

997339689
558/2/07655: RNCC: 3 | RNVC: 2
558-2-07655: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-733-9692
Torque Wrench

997339692
558/2/07657/002: RNCC: 3 | RNVC: 2
558-2-07657-002: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-456-0859
D Extractor Adaptor

994560859
A0105311: RNCC: 3 | RNVC: 2
A0105311: RNCC: 5 | RNVC: 2
27A4767: RNCC: 6 | RNVC: 9
99-713-2274: RNCC: 6 | RNVC: 9

20 Jun 1977

5120-99-415-3691
Mounting Extractor

994153691
NO PRIMARY REF 99-415-3691: RNCC: 3 | RNVC: 2
BR26648: RNCC: 5 | RNVC: 2
36VV21410: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-9511
Socket Wrench Socket

991229511
EBM29: RNCC: 3 | RNVC: 2
BS4006-TABLE 13 29MM: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-460-4029
Adaptor

994604029
NO PRIMARY REF 99-460-4029: RNCC: 3 | RNVC: 2
PE51338: RNCC: 5 | RNVC: 9
64DE617: RNCC: 6 | RNVC: 9
64DE617: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-257-9322
Retainer

992579322
LRT-12-045: RNCC: 3 | RNVC: 2
LST.129: RNCC: 5 | RNVC: 9

18 Aug 1995

5120-99-826-4669
Open End Wrench

998264669
112139 ST: RNCC: 3 | RNVC: 2
A.P.57585: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-801-8786
Spanner Wrench

998018786
FV 438694/3: RNCC: 3 | RNVC: 2
AT581: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-226-2100
Electrical Contact Remover

992262100
539960-1: RNCC: 3 | RNVC: 2
1125604: RNCC: 5 | RNVC: 2
CV189318STTE: RNCC: 5 | RNVC: 2
924081.0179: RNCC: 5 | RNVC: 2

9 Mar 2012

5120-99-758-5896

5120-99-768-2905
Spanner Wrench

5120-99-759-1115
Reamer Adaptor

5120-99-120-4689
Pliers

991204689
BS3087: RNCC: 4 | RNVC: 1
P105: RNCC: 5 | RNVC: 2
P105: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-558-3813
Valve Hou Extractor

995583813
BDC4343: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-745-9391
Spanner Wrench

997459391
T.7217-407: RNCC: 3 | RNVC: 2
T7217-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-924-2942
Inspecti Mirror Set

999242942
NO PRIMARY REF 99-924-2942: RNCC: 3 | RNVC: 2
MAR1NE1NSPECT10NSETN: RNCC: 5 | RNVC: 2
SP (MARINE SET N) "N" SET: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-545-3338
Combination Box And Open End Wrench

995453338
900216-0093: RNCC: 3 | RNVC: 2
1-0WE186879: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-867-5185
Sprocket Extractor

998675185
NO PRIMARY REF 99-867-5185: RNCC: 3 | RNVC: 2
FV586277: RNCC: 5 | RNVC: 2
9ACRFV586277: RNCC: 6 | RNVC: 9

24 May 1977

5120-99-136-1094
Socket Wrench

991361094
558/2/02369/000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-1453
Tie Strap Wrench

997691453
325043: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-2607
Spanner Wrench

997692607
T1663: RNCC: 3 | RNVC: 2
RVS11 MK2: RNCC: 6 | RNVC: 9
RVS12 MK2: RNCC: 6 | RNVC: 9

11 Oct 1991

5120-99-760-2191
Box Wrench

997602191
CXM1113: RNCC: 3 | RNVC: 2
VT20179: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-226-1826
Torque Wrench

992261826
11086: RNCC: 3 | RNVC: 2
62459213: RNCC: 5 | RNVC: 2
62459213-006: RNCC: 5 | RNVC: 2
247648: RNCC: 5 | RNVC: 2

14 Nov 2011

5120-99-207-8867
Ratchet Head

992078867
NO PRIMARY REF 99-207-8867: RNCC: 3 | RNVC: 2
0EB1429: RNCC: 5 | RNVC: 2
GM29586: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-986-6600
Seal Inserter And Remover

999866600
EA6305G666-041: RNCC: 3 | RNVC: 2

17 Apr 2003

5120-99-702-0691
Parallel Punch Pin

997020691
NO PRIMARY REF 99-702-0691: RNCC: 3 | RNVC: 2
161FF: RNCC: 5 | RNVC: 2

11 Dec 1995

5120-99-761-3737
Open End Wrench

997613737
P461ZS1029/9: RNCC: 3 | RNVC: 2
H727-460368: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-777-3697
Spanner Wrench

997773697
S1071/1: RNCC: 3 | RNVC: 2
N251/015: RNCC: 5 | RNVC: 1
H933-403430: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-437-4871

5120-99-990-8207
Ring Nut Wrench

999908207
EA6305G527-101: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-961-9325
Screwdriver Bit

999619325
NO PRIMARY REF 99-961-9325: RNCC: 3 | RNVC: 2
SM354: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-724-6335
Ratchet Wrench Set

997246335
68A.PE: RNCC: 3 | RNVC: 2
020TF-003: RNCC: 6 | RNVC: 9

12 Mar 2002

5120-99-559-8820
Open End Wrench

5120-99-974-9701
Socket

999749701
P39536: RNCC: 3 | RNVC: 2

22 Mar 2011

5120-99-747-4534
Fi Open Jaw Spanner

5120-99-280-2795
Drift

992802795
10000011156: RNCC: 3 | RNVC: 2

13 Aug 2013

5120-99-726-8276
Hand Scissors Jack

997268276
6746348: RNCC: 3 | RNVC: 2
92VB17080-BD: RNCC: 5 | RNVC: 2

13 Jan 2005

5120-99-971-5765
Plate

999715765
800860T2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-0776
Cable Sleeving Jig

991240776
SMJ5: RNCC: 3 | RNVC: 2
SMJ5: RNCC: 6 | RNVC: 9
0566-205227: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-215-5923
Punch And Die

992155923
001631: RNCC: 3 | RNVC: 2
E4/001631: RNCC: 5 | RNVC: 2

6 Mar 1996

5120-99-960-6797
Projec Holding Tool

999606797
NO PRIMARY REF 99-960-6797: RNCC: 3 | RNVC: 2
P8A4250-75: RNCC: 5 | RNVC: 2
UX122: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-558-4019
Open End Wrench

995584019
SB9593-1: RNCC: 3 | RNVC: 2
2207: RNCC: 5 | RNVC: 2
H838-356264: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-287-2426
Torque Wrench Adapter

992872426
DON/I/81254: RNCC: 3 | RNVC: 2

14 Nov 2008

5120-99-690-7839
Open End Wrench

996907839
NO PRIMARY REF 99-690-7839: RNCC: 3 | RNVC: 2
KEN-582-0740K: RNCC: 5 | RNVC: 2
KEN-582-0740K: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-239-2333
Socket Wrench

992392333
04809016: RNCC: 3 | RNVC: 2

4 Aug 2003

5120-99-139-7795
Flat Tip Screwdriver

991397795
100182-9000-007: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-758-9436
Swage

997589436
317065: RNCC: 3 | RNVC: 2
317065: RNCC: 6 | RNVC: 9
3A/6067: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-819-1794
Mechanical Puller

998191794
FV 719116: RNCC: 3 | RNVC: 2
AT846: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-617-2315
Spanner Wrench

996172315
HU20878: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-700-1419
Torque Wrench

997001419
JUNIOR 0-100: RNCC: 3 | RNVC: 2
FB202508: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-508-4091
Torque Wrench

995084091
13002: RNCC: 3 | RNVC: 2
13002: RNCC: 5 | RNVC: 1
MODEL 5: RNCC: 5 | RNVC: 1
MCP24B: RNCC: 6 | RNVC: 9

10 Feb 2000

5120-99-124-0379
Electrical Ejector

991240379
CZ23291: RNCC: 3 | RNVC: 2
1H276: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-5573
Craftsman's Tweezers

991385573
28: RNCC: 3 | RNVC: 2
28: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-406-2561
Tur Clinching Punch

994062561
NO PRIMARY REF 99-406-2561: RNCC: 3 | RNVC: 2
F6 1-2TOOL2: RNCC: 5 | RNVC: 2
28FP458: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-4767
Flat Tip Screwdriver

991204767
NO PRIMARY REF 99-120-4767: RNCC: 3 | RNVC: 2
1E5240: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-602-1531
Spanner Wrench

996021531
452-65236-170: RNCC: 3 | RNVC: 2
FV2206264: RNCC: 5 | RNVC: 2
DS/N/1041: RNCC: 7 | RNVC: 1

13 Aug 1997

5120-99-715-9939
Socket Wrench Socket

997159939
AJJ6193-343B: RNCC: 3 | RNVC: 2
AJJ6193-343: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-829-3996
Adaptor Sleeve

998293996
E303-11: RNCC: 3 | RNVC: 2
Y032-441-01: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-924-5869
Fetching-Up Punch

999245869
NO PRIMARY REF 99-924-5869: RNCC: 3 | RNVC: 2
FP7: RNCC: 5 | RNVC: 2
85-25-19-10-1802: RNCC: 5 | RNVC: 2

2 Feb 1977

5120-99-120-6621
Retaining Ring Pliers

991206621
SK2286: RNCC: 3 | RNVC: 2
0275-120-6621: RNCC: 6 | RNVC: 9
0275-199009: RNCC: 6 | RNVC: 9
1B4575: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-404-3040
Hand Hammer

994043040
TL-502-177: RNCC: 3 | RNVC: 2

28 Nov 2007

5120-99-153-4735
Spring Inserter And Remover

991534735
700-9999-020: RNCC: 3 | RNVC: 2
40010330: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-99-733-9690
Extractor

997339690
558/2/07656: RNCC: 3 | RNVC: 2
558-2-07656: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-746-1984
Thickness Gage Blade

997461984
A/DD580541/008: RNCC: 3 | RNVC: 2
880541-008: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-664-0020
Socket Wrench Socket

996640020
55437A18-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-862-5273
Hand Hammer

998625273
L900-2234: RNCC: 3 | RNVC: 9

11 Dec 2012

5120-99-869-2093
Open End Wrench

998692093
NMT-252: RNCC: 3 | RNVC: 2

1 Dec 1998

5120-99-882-7229
Retaining Ring Pliers

998827229
NO PRIMARY REF 99-882-7229: RNCC: 3 | RNVC: 2
546-641: RNCC: 5 | RNVC: 2
UWS4A1: RNCC: 6 | RNVC: 9

11 Aug 2004

5120-99-922-3963
Hand Hammer

999223963
NO PRIMARY REF 99-922-3963: RNCC: 3 | RNVC: 2
382-2083: RNCC: 5 | RNVC: 2

8 Feb 2011

5120-99-910-7837
Hand Rivet Set Up

999107837
DEF1221: RNCC: 4 | RNVC: 1
H2381: RNCC: 5 | RNVC: 2
1C5403: RNCC: 6 | RNVC: 9
H2381: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-831-5215
Hand Hammer

998315215
BS876: RNCC: 4 | RNVC: 1

29 Jul 1991

5120-99-252-7432
Valve Seat Inserter

992527432
GA5101-8: RNCC: 3 | RNVC: 2
GA5101-8: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-930-3072
Socket Wrench Socket

999303072
29891: RNCC: 3 | RNVC: 2
24.5990: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-771-4960
Socket Wrench Handle Bar

997714960
825-99902: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-773-2732
Ratchet Head

997732732
453 7408-506: RNCC: 3 | RNVC: 2
453 7408-506: RNCC: 5 | RNVC: 2

10 Sep 2003

5120-99-777-2946
Screwdriver Bit

997772946
FV1054104: RNCC: 3 | RNVC: 2

28 Mar 1984

5120-99-771-9663
Socket Sp Extension

997719663
H22352: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-766-6593
Socket Head Screw Key

997666593
160: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-766-1007
Socket Wrench Attachment Universal Joint

997661007
PE91: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-778-3731
Socket Head Screw Key

997783731
NFL442: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-799-0510
Spanner Wrench

997990510
AJT.6834: RNCC: 3 | RNVC: 2
7129TINST: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-771-5970
Box Wrench

997715970
P5173 189170: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-3910
Open End Wrench

991243910
0SA264: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-772-4802
Main Rod Assembly

997724802
093115: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-776-4298
Torque Wrench

997764298
882575: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-562-7470
Spanner Wrench

995627470
18647J: RNCC: 3 | RNVC: 2

15 May 1991

5120-99-702-2098
Flat Tip-Cross Tip Screwdriver

997022098
KBH000030: RNCC: 3 | RNVC: 2
KBH000030: RNCC: 5 | RNVC: 2
NRC 6993: RNCC: 5 | RNVC: 9
NRC 6993: RNCC: 5 | RNVC: 9
FJ961M60001: RNCC: 6 | RNVC: 9

24 Oct 1996

5120-99-216-3823
Spanner Wrench

992163823
TR119: RNCC: 3 | RNVC: 1

16 Oct 2013

5120-99-755-9709
Open End Wrench

997559709
BA50142: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-427-7585
Open End Wrench

994277585
99003: RNCC: 3 | RNVC: 2
1222: RNCC: 5 | RNVC: 1

16 Dec 1992

5120-99-459-0584
Assembling Tool

994590584
HW18029: RNCC: 3 | RNVC: 2
64VV1028: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-547-1189
Tightening Tool

995471189
P5173016770: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-0868
Pin Inserter

997600868
P-891168-407: RNCC: 3 | RNVC: 2
P891168-407: RNCC: 5 | RNVC: 2
BM-P-891168-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-480-8573
Hand Blind Riveter

994808573
0-MR77: RNCC: 3 | RNVC: 2
494-070: RNCC: 5 | RNVC: 2

31 May 2011

5120-99-957-5002
Open End Wrench

999575002
0DA219: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 1: RNCC: 4 | RNVC: 1
BS192-TABLE 2 19/32X25/32A/F: RNCC: 4 | RNVC: 1
6J5978: RNCC: 5 | RNVC: 2
A1062: RNCC: 5 | RNVC: 2
TABLE I(E) 19/32X25/32A/F: RNCC: 6 | RNVC: 9
544296: RNCC: 6 | RNVC: 9
1C6418: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-8414
Socket Wrench Extension

991208414
BS4006-TABLE 28 6.30MM X 50MM LG: RNCC: 4 | RNVC: 1
TRA807721: RNCC: 5 | RNVC: 2
H6296: RNCC: 6 | RNVC: 9
10AG653: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-300-4989
Nutdriver

993004989
NS-5.5MM: RNCC: 3 | RNVC: 2
H24067: RNCC: 5 | RNVC: 2

12 Aug 1992

5120-99-127-6250
Socket Wrench Screwdriver Attachment

991276250
TMA3 1-2: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-135-7489
Box Wrench

991357489
BS3555-TABLE 1 46X50MM: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 2: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6723: RNCC: 6 | RNVC: 9
TABLE I(A) 46X50MM: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-954-3013
Con Extraction Tool

999543013
NO PRIMARY REF 99-954-3013: RNCC: 3 | RNVC: 2
558-1-00600: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-156-3621
Plate Extractor

991563621
K1876/1024: RNCC: 3 | RNVC: 2
FJ961DT0023: RNCC: 6 | RNVC: 9

10 Sep 1996

5120-99-138-4785
Crimping To Die Set

991384785
NO PRIMARY REF 99-138-4785: RNCC: 3 | RNVC: 2
68049: RNCC: 5 | RNVC: 2
C68049: RNCC: 5 | RNVC: 2
1H858: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-760-6721
Socket Wrench Socket

997606721
3613-A10-405: RNCC: 3 | RNVC: 2
3613A10-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-539-9628
Pin Spanner

995399628
NO PRIMARY REF 99-539-9628: RNCC: 3 | RNVC: 2
3073-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-557-5974
Open End Wrench

995575974
56978-0270: RNCC: 3 | RNVC: 2
0270-56978: RNCC: 5 | RNVC: 2
56978DET0270: RNCC: 5 | RNVC: 2
363-363318: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-459-9101
Spanner Wrench

994599101
25Y259A: RNCC: 3 | RNVC: 2
26TD-95048: RNCC: 6 | RNVC: 9
26TD95048: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-701-5248
Bonding Tool

997015248
EA6705G612-041: RNCC: 3 | RNVC: 2

22 Dec 2004

5120-99-120-7297
Hand Hammer

991207297
616: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
616H0: RNCC: 5 | RNVC: 2
H5995: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-324-1902
Socket Wrench Screwdriver Attachment

993241902
NO PRIMARY REF 99-324-1902: RNCC: 3 | RNVC: 2
618-954: RNCC: 5 | RNVC: 2

11 Apr 2012

5120-99-617-1739
Face Spanner Wrench Socket

996171739
HU 17167: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-659-6964
Screw Thread Insert Inserter

996596964
HST111B-405: RNCC: 3 | RNVC: 2
HST111B405: RNCC: 5 | RNVC: 2

5 Jan 1984

5120-99-910-6570
Blacksmiths' Tongs

999106570
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
H2800: RNCC: 6 | RNVC: 9
1C2449: RNCC: 6 | RNVC: 9
DL-9-A-H2800: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-757-0415
Retaining Ring Installation Tool

997570415
ESK 5249 22: RNCC: 3 | RNVC: 2
209-042329: RNCC: 5 | RNVC: 2

19 Feb 2002

5120-99-755-8685
Adaptor Torque

997558685
SD4-264540: RNCC: 3 | RNVC: 2

9 Oct 1986

5120-99-910-6429
Tinmans Stake

999106429
NO PRIMARY REF 99-910-6429: RNCC: 3 | RNVC: 2
H2555: RNCC: 5 | RNVC: 2
1C2312: RNCC: 6 | RNVC: 9
FA17691: RNCC: 6 | RNVC: 9
H2555: RNCC: 6 | RNVC: 9

14 Feb 1984

5120-99-532-0172
Seal Inserter

995320172
EA6305G610-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-136-2578
Socket Wrench

991362578
56978-0068: RNCC: 3 | RNVC: 2
0068-56978: RNCC: 5 | RNVC: 2
56978-0068: RNCC: 5 | RNVC: 2
KS9819: RNCC: 6 | RNVC: 9
363-136-2578: RNCC: 6 | RNVC: 9
363-363308: RNCC: 6 | RNVC: 9
070-363176: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-837-9447
Flat Tip Screwdriver

998379447
KEN5723040K: RNCC: 3 | RNVC: 2
2007622: RNCC: 5 | RNVC: 2

28 Feb 2013

5120-99-910-5542
Ice Pricker

999105542
H1865: RNCC: 3 | RNVC: 2
1B1707: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-3830
Screw Thread Insert Inserter

996073830
HC22892: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-103-5360
Spanner Wrench

991035360
AE2698: RNCC: 3 | RNVC: 2
27M12723: RNCC: 6 | RNVC: 9
27M1035360: RNCC: 6 | RNVC: 9
27M12723: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-117-6603

5120-99-116-7193

5120-99-974-2311
Socket Wrench Handle Ratchet Head

999742311
MBEU57645: RNCC: 3 | RNVC: 2

20 Nov 2007

5120-99-654-1101
Spanner Wrench

996541101
A0104998: RNCC: 3 | RNVC: 2
5CW14506: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-228-3861
Face Spanner Wrench Socket

992283861
11036-1005-05: RNCC: 3 | RNVC: 2

30 Sep 2005

5120-99-733-6299
Spanner Wrench

997336299
LC203: RNCC: 3 | RNVC: 2
LC203 (16-516): RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-977-1975
Shaft Pu Long Screw

999771975
NO PRIMARY REF 99-977-1975: RNCC: 3 | RNVC: 2
CG240-8: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-7898
Hand Rivet Set

999107898
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A-H2399: RNCC: 5 | RNVC: 9
DL9A: RNCC: 5 | RNVC: 9
H2399: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-144-6835
Rati Torque Adaptor

991446835
460002147: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-0428
Crimping To Die Set

991300428
19573: RNCC: 3 | RNVC: 2
3A3683: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-760-7152

5120-99-120-9043
Rive Wrench Adaptor

991209043
7180-0800: RNCC: 3 | RNVC: 2
7180-0800: RNCC: 5 | RNVC: 2
G18/5: RNCC: 5 | RNVC: 2
7180-0800: RNCC: 5 | RNVC: 9
1C7097: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-6605
Torque Wrench Adapter

996596605
P-891067-405: RNCC: 3 | RNVC: 2
P891067-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-131-6462
Ratchet Wrench

991316462
FV3204585: RNCC: 3 | RNVC: 2
BR90/19-20-10-1238: RNCC: 5 | RNVC: 2
68B 22X24: RNCC: 5 | RNVC: 2
031FU-029: RNCC: 6 | RNVC: 9

14 Apr 2003

5120-99-659-4600
Spanner Wrench

996594600
83710077-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-517-1458
Open End Wrench

995171458
A1070116: RNCC: 3 | RNVC: 2
BUGGSIE 866C: RNCC: 5 | RNVC: 2

18 Apr 2001

5120-99-714-4138

5120-99-124-2182
Socket Wrench Socket

991242182
AD750: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9
851666: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-775-1804
Spanner Wrench

997751804
EMT152: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-607-9165
Oil Jet T Drift Pad

996079165
NO PRIMARY REF 99-607-9165: RNCC: 3 | RNVC: 2
PE9181: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-152-0957
Knee Pad

991520957
NO PRIMARY REF 99-152-0957: RNCC: 3 | RNVC: 2
465-9369: RNCC: 5 | RNVC: 2

3 May 2011

5120-99-471-0797
Internal Wrench

994710797
1L423: RNCC: 3 | RNVC: 2
W10-04-1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-253-8849
Torque Wrench

992538849
TB250SR AND 029000: RNCC: 3 | RNVC: 2
029000: RNCC: 5 | RNVC: 1
TB250SR: RNCC: 5 | RNVC: 1
029000 AND TB250SR: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-608-2101
Punch

996082101
AS511978: RNCC: 3 | RNVC: 2

16 Apr 1992

5120-99-297-8492
Seal Inserter

992978492
MC1248556: RNCC: 3 | RNVC: 2

31 Jan 2011

5120-99-978-1936
Combination Box And Open End Wrench

999781936
RJM11: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-977-7413
Socket Wrench Socket

999777413
TMUSM13: RNCC: 3 | RNVC: 2
TMUSM13: RNCC: 5 | RNVC: 2
1L699: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-219-2244
Spanner Wrench

5120-99-084-5085
Cross Tip Screwdriver

990845085
111114/023: RNCC: 3 | RNVC: 2
GM-U-121601/7: RNCC: 5 | RNVC: 2
FK9706W0102: RNCC: 6 | RNVC: 9

4 Feb 1998

5120-99-558-4021
Spanner Wrench

995584021
SD2249-1: RNCC: 3 | RNVC: 2
314: RNCC: 5 | RNVC: 2
H838-272152: RNCC: 6 | RNVC: 9
99-429-4683: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-526-2592
Seat Grinding Plate

995262592
54554-302: RNCC: 3 | RNVC: 2
R3529-28: RNCC: 5 | RNVC: 1
R3529/28: RNCC: 5 | RNVC: 1
480-327257: RNCC: 6 | RNVC: 9
480-526-2592: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-797-4081
Screwdriver Bit

997974081
99-75MMBP: RNCC: 3 | RNVC: 2
142-181: RNCC: 5 | RNVC: 2
90/99-75MMBP: RNCC: 5 | RNVC: 2
99-75MMBP: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6197
Socket Wrench

999106197
BS2558-TABLE 3: RNCC: 4 | RNVC: 1
UKD1S2097-2: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H2446: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-2365
Socket Wrench Socket

991302365
DHM8: RNCC: 3 | RNVC: 2
ESM408: RNCC: 3 | RNVC: 2
BS4006-TABLE 4 8MM: RNCC: 4 | RNVC: 1
04-4021: RNCC: 5 | RNVC: 2
FL970JR0003: RNCC: 6 | RNVC: 9
1L272: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-429-4394
Tube Spanner

994294394
NO PRIMARY REF 99-429-4394: RNCC: 3 | RNVC: 2
ASSK565: RNCC: 5 | RNVC: 2
603777: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-605-6607
Spanner Wrench

996056607
N.O.D.7018 SH3 ADAPTER KEY MK8: RNCC: 3 | RNVC: 2
NOD7018SH3KEY ADAPTERMK8: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-109-4960
Seat Spanner

991094960
T.R.115: RNCC: 3 | RNVC: 2
B T.R.115: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-188-5645
Tooling Guide Bar

991885645
DML050540: RNCC: 3 | RNVC: 2
800015252 ITEM 4: RNCC: 5 | RNVC: 2

2 Apr 2009

5120-99-910-4493
Armourers Bit

999104493
H5597: RNCC: 4 | RNVC: 1
B2BC3070: RNCC: 6 | RNVC: 9
GH847: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-830-8398
Block

998308398
800836T1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-5034
Needle

994655034
1J223: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-404-1863
Seal Inserter

994041863
AE8446: RNCC: 3 | RNVC: 2

28 Nov 2011

5120-99-644-3155

5120-99-784-0657
Open End Wrench

997840657
BS192-TABLE 1 17X19MM: RNCC: 4 | RNVC: 1
2JM1719: RNCC: 5 | RNVC: 2
04 0144: RNCC: 5 | RNVC: 2
214-7050: RNCC: 5 | RNVC: 2
SF-6957: RNCC: 5 | RNVC: 2
OM1719: RNCC: 5 | RNVC: 2
99-751-4016: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-535-4603
Dowel Extractor

995354603
S14-94-0400 51/4: RNCC: 3 | RNVC: 2

6 Apr 1994

5120-99-974-7496
Socket Wrench Set

999747496
DP 3/4: RNCC: 3 | RNVC: 2

7 Jun 2006

5120-99-422-4655
Socket Wrench

994224655
N38432-8: RNCC: 3 | RNVC: 2
88604-606-084: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-577-3867
Screw Jack

995773867
AKL50-15.5-01-595: RNCC: 3 | RNVC: 2
15LX3021928S+H: RNCC: 5 | RNVC: 2
M529623: RNCC: 5 | RNVC: 2
9 9706 01: RNCC: 5 | RNVC: 2

5 Nov 1996

5120-99-910-5980
Socket Wrench

999105980
BS2558-TABLE 3 3/8X7/16A/F: RNCC: 4 | RNVC: 1
H20159: RNCC: 5 | RNVC: 2
APP0LL044-38: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5218: RNCC: 6 | RNVC: 9
TABLE I(D) 3/8X7/16A/F: RNCC: 6 | RNVC: 9
99-335-1713: RNCC: 6 | RNVC: 9
1C9105980: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6205
Magneto Spanner Set

999106205
H20213: RNCC: 3 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2444: RNCC: 6 | RNVC: 9
H2444: RNCC: 6 | RNVC: 9
FA17295: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-527-2998
Spanner Wrench

995272998
64Y33: RNCC: 3 | RNVC: 2
26DL95558: RNCC: 6 | RNVC: 9

18 May 1994

5120-99-120-9521
Socket Wrench Socket

991209521
1209521: RNCC: 3 | RNVC: 2
1L1209521: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-676-3953
Sledge

996763953
26835082: RNCC: 3 | RNVC: 2

12 Aug 1999

5120-99-225-5341
Scanner Extraction

992255341
30-M046C: RNCC: 3 | RNVC: 2
SPO5588: RNCC: 5 | RNVC: 2

7 Jun 1994

5120-99-035-3003
Adjust Tool Holding

990353003
LC113A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-745-5152
Socket Wrench Handle Bar

997455152
PM3405-3: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-421-3400

5120-99-420-4087

5120-99-337-1377
Installation And Re

993371377
70-99-955: RNCC: 3 | RNVC: 2
031X0-004: RNCC: 6 | RNVC: 9

27 May 2003

5120-99-455-9926

5120-99-971-5609
Spanner Wrench

999715609
SST/Y/581/00/0207/101: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-915-5787
End Cap Extractor

999155787
PHX 2.5IN. EXT: RNCC: 3 | RNVC: 2
M12 SLIDE HAMMER-R01: RNCC: 5 | RNVC: 2

4 Nov 2005

5120-99-350-3463
Spanner

993503463
11-P461Z1039/1: RNCC: 3 | RNVC: 2

18 Dec 1997

5120-99-147-6287
Hand Terminal Crimping Tool

991476287
290-4853: RNCC: 3 | RNVC: 2

20 Dec 2002

5120-99-552-6392
Spanner Wrench

995526392
144967P1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-260-8891
Torque Wrench Adapter

992608891
DRT68201: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-99-124-3917
Open End Wrench

991243917
0SA288: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-428-5114
Socket Wrench Adapter-Extension

994285114
825/99801: RNCC: 3 | RNVC: 2
FL9631P0017: RNCC: 6 | RNVC: 9

14 Feb 1996

5120-99-208-9474
Inserted Hammer Face

992089474
410PF: RNCC: 3 | RNVC: 2
710PF: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-871-6648
Spanner Wrench

998716648
7R-9641463: RNCC: 3 | RNVC: 2

16 Aug 2011

5120-99-222-6801
Socket Wrench

992226801
317-4BA: RNCC: 3 | RNVC: 2
CAT2704: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-131-3933
Eye Torque Adaptor

991313933
MC1275020: RNCC: 3 | RNVC: 2

20 May 2002

5120-99-984-7788
Mechanical Puller

999847788
3MNC 2167: RNCC: 3 | RNVC: 2

31 Oct 2001

5120-99-835-1310
Hand Hydraulic Jack

998351310
6385J: RNCC: 3 | RNVC: 2
10869078: RNCC: 5 | RNVC: 2
10869077: RNCC: 5 | RNVC: 2
333-114: RNCC: 5 | RNVC: 2
DJK1006: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-352-4313
Heavy D Impact Tool

993524313
NO PRIMARY REF 99-352-4313: RNCC: 3 | RNVC: 2
2W80P: RNCC: 5 | RNVC: 2
C569-70T279415: RNCC: 6 | RNVC: 9

24 May 2002

5120-99-617-5950
Mechanical Puller

996175950
HU24419-1: RNCC: 3 | RNVC: 2
HU24419-01: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-137-5727
Socket Head Screw Key

991375727
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H7015: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H7015: RNCC: 6 | RNVC: 9

25 Apr 1991

Load More Results