What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 9 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 9 of 108

5120-99-133-4683
Mechanical Puller

991334683
S3S18340000: RNCC: 3 | RNVC: 2
S3S18340000: RNCC: 5 | RNVC: 2

17 Sep 1992

5120-99-198-5826
Spanner Wrench

991985826
AJJ6193-247B: RNCC: 3 | RNVC: 2
AJJ6193-247: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-151-5492
Leveling-Support Jack

991515492
PE24987: RNCC: 3 | RNVC: 2

27 Jan 2010

5120-99-423-2460
Seal Inserter

994232460
892/01027: RNCC: 3 | RNVC: 2

17 May 2011

5120-99-820-0215
Spanner Wrench

998200215
AM 00 06 01049: RNCC: 1 | RNVC: 2
9535.W627: RNCC: 3 | RNVC: 2
60206523: RNCC: 5 | RNVC: 2
WR.HPR80-125X8: RNCC: 5 | RNVC: 2

11 Jul 2006

5120-99-737-6647
Spanner Wrench

997376647
S3S17275000: RNCC: 3 | RNVC: 2
S3S17275000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-862-8250
Open End Wrench

998628250
894-50: RNCC: 3 | RNVC: 2
657 719: RNCC: 5 | RNVC: 2
894 50: RNCC: 5 | RNVC: 2
DIN894-50: RNCC: 5 | RNVC: 2
56-6/23-001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-033-3293
Hydraulic Jack Parts Kit

990333293
870-50598: RNCC: 3 | RNVC: 2

3 Nov 1992

5120-99-795-0602
Ring Tool

997950602
M11459: RNCC: 3 | RNVC: 2
SCDM11459: RNCC: 5 | RNVC: 2
M11459/ISS 1A: RNCC: 5 | RNVC: 2
0433X-005: RNCC: 6 | RNVC: 9

16 Oct 2004

5120-99-496-0151
Torque Wrench Adapter

994960151
S3S18187000: RNCC: 3 | RNVC: 2

4 Aug 1992

5120-99-733-3026
Mechanical Puller

997333026
S3S14284000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-841-9545
Socket Wrench

998419545
S3S18189000: RNCC: 3 | RNVC: 2
S3S18189000: RNCC: 5 | RNVC: 2

18 Oct 1993

5120-99-877-7958
Pin Remover

998777958
S3S18434000: RNCC: 3 | RNVC: 2

25 Sep 1996

5120-99-185-5236
Torque Wrench Adapter

991855236
S3S20251000: RNCC: 3 | RNVC: 2

30 Aug 2002

5120-99-770-3901
Torque Wren Adapter

997703901
83790067: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-131-1068
Spanner Wrench

991311068
S3S13874000: RNCC: 3 | RNVC: 2

11 Jul 1994

5120-99-192-4098
Hydraulic Parts Kit

991924098
870-50597: RNCC: 3 | RNVC: 2

3 Nov 1992

5120-99-355-4482
Leveling-Support Jack

993554482
PE23730: RNCC: 3 | RNVC: 2

15 Dec 2006

5120-99-590-1479
Tool And Equipment

995901479
MBEU66340: RNCC: 3 | RNVC: 2
MBEU66340: RNCC: 5 | RNVC: 2

23 Mar 2002

5120-99-629-8541
Extraction Tool

996298541
0464-0042: RNCC: 3 | RNVC: 2
3D/464-042: RNCC: 5 | RNVC: 2
464-042: RNCC: 5 | RNVC: 2
0042: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-733-3031
Mechanical Puller

997333031
S3S14264000: RNCC: 3 | RNVC: 2

25 Apr 1991

NSN 5120-99-349-6462 993496462 WRENCH,RATCHET

5120-99-349-6462
Ratchet Wrench

993496462
870-44582: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-783-9918
Torque Wrench Adapter

997839918
NTS13615: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-811-3159
Socket Wrenc Socket

998113159
5029033: RNCC: 3 | RNVC: 2
XA97X568A01: RNCC: 6 | RNVC: 9

18 Dec 1997

5120-99-501-1004
Spanner Wrench

5120-99-368-8581
Inserter And Remove

5120-99-215-3717
Torque Wrench Adapter

992153717
S3S18305000: RNCC: 3 | RNVC: 2
S3S18305000: RNCC: 5 | RNVC: 2

18 May 1993

5120-99-348-2159
Drift

993482159
S3S18476000: RNCC: 3 | RNVC: 2

6 Apr 2001

5120-99-737-6652
Torque Wrench Adapter

997376652
S3S14220000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-939-2759
Torque Wrench Adapter

999392759
S3S14512000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-290-6421
Spanner Wrench

992906421
AMP 00 06 01057: RNCC: 1 | RNVC: 2
9535.W625: RNCC: 3 | RNVC: 2
WR.HPR80-125X6: RNCC: 5 | RNVC: 2
60206520: RNCC: 5 | RNVC: 2

11 Jul 2006

5120-99-722-5124
Seal Compression Sleeve

997225124
DAPT60-0173-00: RNCC: 3 | RNVC: 2

4 Aug 2000

5120-99-210-2978
Cross Tip Screwdriver

992102978
0464-0055: RNCC: 3 | RNVC: 2
464-055: RNCC: 5 | RNVC: 2
3D/464-055: RNCC: 5 | RNVC: 2
0055: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-179-9270
Extractor

991799270
S3S18384000: RNCC: 3 | RNVC: 2
S3S18384000: RNCC: 5 | RNVC: 2

28 May 1993

5120-99-257-9191
Torque Adaptor Assembly

992579191
S3S18420000: RNCC: 3 | RNVC: 1

28 Jun 1995

5120-99-282-7037
Mechanical Puller

992827037
S3S18293000: RNCC: 3 | RNVC: 2

4 Aug 1992

5120-99-190-7595
Hand Hydraulic Jack

991907595
PE33302: RNCC: 3 | RNVC: 2

19 Dec 2011

5120-99-488-6853
Torque Wrench Adapter

994886853
DAPT61-0009-00: RNCC: 3 | RNVC: 2

26 Jun 2002

5120-99-729-3349
Cable Type Ratchet Lever Puller

997293349
870-44610: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-783-5270
Box Wrench

997835270
S3S14652000: RNCC: 3 | RNVC: 2
S3S146552000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-8037
Initial Flare Tool

991388037
CA17064T10: RNCC: 3 | RNVC: 2
CA17064-T10: RNCC: 6 | RNVC: 9
CA17064-T10: RNCC: 6 | RNVC: 9
1C8427: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-417-0088
Hydraulic Parts Kit

994170088
870-50600: RNCC: 3 | RNVC: 2

3 Nov 1992

5120-99-701-8326
Torque Wrench Adapter

997018326
S3S14747000: RNCC: 3 | RNVC: 2
S3S14747000: RNCC: 5 | RNVC: 2

6 Oct 1994

5120-99-607-5528
Drive Pin Punch

996075528
PE27222: RNCC: 3 | RNVC: 2
S3S13924000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-930-8224
Mechanical Puller

999308224
S3S18447000: RNCC: 3 | RNVC: 2

28 Apr 1998

NSN 5120-99-917-5968 999175968 WRENCH,SPANNER

5120-99-917-5968
Spanner Wrench

999175968
MBEU143085: RNCC: 3 | RNVC: 2

1 Oct 1993

5120-99-125-9606
Face Spanner Wrench Socket

991259606
S3S90865000: RNCC: 3 | RNVC: 1
S3S90865000: RNCC: 5 | RNVC: 2

11 Jul 1994

NSN 5120-99-382-4501 993824501 WRENCH,SPANNER

5120-99-382-4501
Spanner Wrench

993824501
AMP 00 06 01059: RNCC: 1 | RNVC: 2
9535.W541: RNCC: 3 | RNVC: 2
60206522: RNCC: 5 | RNVC: 2
WR.HPR18-40X3: RNCC: 5 | RNVC: 2

11 Jul 2006

5120-99-411-9039
Drift

994119039
NO PRIMARY REF 99-411-9039: RNCC: 3 | RNVC: 2
ST2004: RNCC: 5 | RNVC: 9
27Q13481: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-305-4351
Punch

993054351
DAPT60-0086-00: RNCC: 3 | RNVC: 2

28 Nov 2002

5120-99-179-8888
Mechanical Puller

991798888
S3S18182000: RNCC: 3 | RNVC: 2

4 Aug 1992

5120-99-430-8710
Torque Wrench Adapter

994308710
S3S18436000: RNCC: 3 | RNVC: 1
S3S18436000: RNCC: 5 | RNVC: 2

11 Jul 1994

5120-99-602-7612
Bearing And Bushing Inserter

996027612
892/01244: RNCC: 3 | RNVC: 2

16 Sep 2009

5120-99-433-4518
Spanner Wrench

994334518
9515.W061: RNCC: 3 | RNVC: 2
9515,W061: RNCC: 5 | RNVC: 2

25 Nov 2008

5120-99-709-4540
Mechanical Puller

997094540
S3S18330000: RNCC: 3 | RNVC: 2
S3S18330000: RNCC: 5 | RNVC: 2

14 Nov 1991

5120-99-614-8768
Cascade Selector Valve Assembly Torque Adaptor

996148768
H39739A1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-568-5574
Hydraulic Jack Parts Kit

995685574
870-50599: RNCC: 3 | RNVC: 2

3 Nov 1992

5120-99-733-3019
Torque Wrench Adapter

997333019
S3S14268000: RNCC: 3 | RNVC: 2
S3S14268000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-760-5488
Multiposition Vise

997605488
1420: RNCC: 3 | RNVC: 2
1420: RNCC: 5 | RNVC: 2
TYPE1420: RNCC: 5 | RNVC: 2
TYPE1420: RNCC: 5 | RNVC: 9
CH140137: RNCC: 6 | RNVC: 9
85-691-9374: RNCC: 6 | RNVC: 9
TYPE1420LBA: RNCC: 6 | RNVC: 9
9002-1680: RNCC: 6 | RNVC: 9

7 Mar 1990

5120-99-701-4197
Mechanical Puller

997014197
S3S18341000: RNCC: 3 | RNVC: 2
S3S18341000: RNCC: 5 | RNVC: 2

17 Sep 1992

NSN 5120-99-120-5933 991205933 PICK HEAD,DIGGING

5120-99-120-5933
Digging Pick Head

991205933
UK1SCS3226: RNCC: 2 | RNVC: 2

25 Apr 1991

5120-99-538-6401
Loading Tool Assemb

995386401
NO PRIMARY REF 99-538-6401: RNCC: 3 | RNVC: 2
CF45270: RNCC: 5 | RNVC: 2
F45270: RNCC: 5 | RNVC: 2
H454-538-6401: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-435-4482
Bedding Mand Handle

994354482
NO PRIMARY REF 99-435-4482: RNCC: 3 | RNVC: 2
NT4337: RNCC: 5 | RNVC: 2
5UA7039: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-6645

5120-99-776-7961
Face Spanner Wrench Socket

997767961
OIT-C-13538: RNCC: 3 | RNVC: 2
01T-C-13538: RNCC: 5 | RNVC: 2
01TC13538: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-1024
Socket Wrench Socket

991381024
SWM171: RNCC: 3 | RNVC: 2
SWM171 LOCK-ON: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-748-6906
Torque Wrench

997486906
NO PRIMARY REF 99-748-6906: RNCC: 3 | RNVC: 2
CV177465: RNCC: 5 | RNVC: 2
STW200: RNCC: 5 | RNVC: 2

13 May 2011

5120-99-761-3710
Fuel Nozz Extractor

997613710
P461S1916: RNCC: 3 | RNVC: 2
11/P461S1916: RNCC: 5 | RNVC: 2
T.746/13: RNCC: 5 | RNVC: 2
H727-460297: RNCC: 6 | RNVC: 9
5120-99-517-5159: RNCC: 6 | RNVC: 9
995008300: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-110-1903
Sleeve

991101903
21-102: RNCC: 3 | RNVC: 2

28 May 1993

5120-99-411-9095
Assembly Post

994119095
NO PRIMARY REF 99-411-9095: RNCC: 3 | RNVC: 2
ST1047: RNCC: 5 | RNVC: 9
27Q10396: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-874-7636
Hand Optical Fiber Burnisher

998747636
927-1205: RNCC: 3 | RNVC: 2

12 Jul 2010

5120-99-561-8301
Open End Wrench

995618301
DE1398: RNCC: 3 | RNVC: 2
390-015433: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-5416
Mechanical Puller

996595416
CHA755-053-407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-122-2090
Extract Drill Guide

991222090
NO PRIMARY REF 99-122-2090: RNCC: 3 | RNVC: 2
7994-0106: RNCC: 5 | RNVC: 2
7994-0106: RNCC: 5 | RNVC: 2
RTJ0P164: RNCC: 5 | RNVC: 2
7994-0106: RNCC: 5 | RNVC: 9
RTJ0P164: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-813-0570
Socket Wrench Socket

998130570
892/01242: RNCC: 3 | RNVC: 2
892/01242: RNCC: 5 | RNVC: 2

16 Sep 2009

5120-99-958-7632
Socket Wrench

999587632
1004-01: RNCC: 3 | RNVC: 2

5 Sep 2012

5120-99-274-4414
Mechanical Puller

992744414
892/01155: RNCC: 3 | RNVC: 2

23 Jan 2007

NSN 5120-99-916-3025 999163025 ADAPTER,TORQUE WRENCH

5120-99-916-3025
Torque Wrench Adapter

999163025
4477-A4: RNCC: 3 | RNVC: 2

18 Aug 1999

NSN 5120-99-573-5642 995735642 INSERTER,SEAL

5120-99-573-5642
Seal Inserter

995735642
SB4P438A0002: RNCC: 3 | RNVC: 2

17 Nov 1997

NSN 5120-99-479-5275 994795275 ADAPTER,TORQUE WREN

5120-99-479-5275
Torque Wren Adapter

994795275
DAE5360GSE: RNCC: 3 | RNVC: 2

18 Feb 1999

NSN 5120-99-665-6973 996656973 ADAPTER,TORQUE WRENCH

5120-99-665-6973
Torque Wrench Adapter

996656973
DAPT61-0008-00: RNCC: 3 | RNVC: 2

25 Jun 2002

NSN 5120-99-917-5737 999175737 PLIERS,LOCKING

5120-99-917-5737
Locking Pliers

999175737
S3S14278000: RNCC: 3 | RNVC: 2

25 Apr 1991

NSN 5120-99-245-0581 992450581 SPANNER,RING

5120-99-245-0581
Ring Spanner

992450581
AM63713: RNCC: 3 | RNVC: 2

16 Jul 1999

NSN 5120-99-722-9164 997229164 HANDLING TOOL,DETENT

5120-99-722-9164
Detent Handling Tool

997229164
MBEU68886: RNCC: 3 | RNVC: 2

7 Oct 1986

NSN 5120-99-614-7532 996147532 WRENCH,OPEN END

5120-99-614-7532
Open End Wrench

996147532
S-681-02-03-A: RNCC: 3 | RNVC: 2

24 Apr 1995

NSN 5120-99-799-5973 997995973 SOCKET,SOCKET WRENCH

5120-99-799-5973
Socket Wrench Socket

997995973
200890205-AFT-1: RNCC: 3 | RNVC: 2

25 Apr 1991

NSN 5120-99-477-6511 994776511 REMOVER,SEAL

5120-99-477-6511
Seal Remover

994776511
S3S18383000: RNCC: 3 | RNVC: 2

3 May 1994

NSN 5120-99-728-0114 997280114 MANDREL,SIZING

5120-99-728-0114
Sizing Mandrel

997280114
HD-70357: RNCC: 3 | RNVC: 2

22 Jul 2005

NSN 5120-99-617-1931 996171931 RATCHET HEAD,SOCKET WRENCH HANDLE

5120-99-617-1931
Socket Wrench Handle Ratchet Head

996171931
HU.19207: RNCC: 3 | RNVC: 2

25 Apr 1991

NSN 5120-99-051-3053 990513053 CRIMPING TOOL

5120-99-051-3053
Crimping Tool

990513053
WT2124Y: RNCC: 3 | RNVC: 2
210-304: RNCC: 5 | RNVC: 2
35574: RNCC: 5 | RNVC: 2
WT2124Y: RNCC: 5 | RNVC: 2

25 Apr 1991

NSN 5120-99-232-8724 992328724 INSERTER,SEAL

5120-99-232-8724
Seal Inserter

992328724
A0272630: RNCC: 3 | RNVC: 2

29 Aug 2002

NSN 5120-99-454-4775 994544775 WRENCH,SPANNER

5120-99-454-4775
Spanner Wrench

994544775
SP1P438A0002: RNCC: 3 | RNVC: 2

30 Jul 1998

NSN 5120-99-733-3017 997333017 ADAPTER,TORQUE WRENCH

5120-99-733-3017
Torque Wrench Adapter

997333017
S3S 14270000: RNCC: 3 | RNVC: 2

25 Apr 1991

NSN 5120-99-137-0596 991370596 WRENCH,TORQUE

5120-99-137-0596
Torque Wrench

991370596
76-181: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT32: RNCC: 4 | RNVC: 1
1H822: RNCC: 6 | RNVC: 9

25 Apr 1991

NSN 5120-99-535-6734 995356734 JACK,HYDRAULIC,HAND

5120-99-535-6734
Hand Hydraulic Jack

995356734
S3S18382002: RNCC: 3 | RNVC: 2

21 Jun 1996

NSN 5120-99-617-3930 996173930 BETA TUBE SPANNER

5120-99-617-3930
Beta Tube Spanner

996173930
DAPT65-0042-00: RNCC: 3 | RNVC: 2

12 Mar 1998

NSN 5120-99-375-3332 993753332 ADAPTOR,SEAL INSTALLER

5120-99-375-3332
Seal Installer Adaptor

993753332
21-102-02: RNCC: 3 | RNVC: 2

28 May 1993

NSN 5120-99-375-5710 993755710 SEAL BULLET

5120-99-375-5710
Seal Bullet

993755710
SB2/P438A0002: RNCC: 3 | RNVC: 2
SB2P438A0002: RNCC: 5 | RNVC: 2

1 Apr 2003

NSN 5120-99-641-7924 996417924 GUIDE,DRILL

5120-99-641-7924
Drill Guide

996417924
4477-A7: RNCC: 3 | RNVC: 2
4477-A7/A3: RNCC: 5 | RNVC: 2

15 Jul 1999

NSN 5120-99-376-9228 993769228 WRENCH,SPANNER

5120-99-376-9228
Spanner Wrench

993769228
AM 00 06 01035: RNCC: 3 | RNVC: 2
60108342: RNCC: 5 | RNVC: 2

22 Jun 2005

NSN 5120-99-614-8701 996148701 PUNCH,DRIVE PIN

5120-99-614-8701
Drive Pin Punch

996148701
HST121-0937: RNCC: 3 | RNVC: 2

25 Apr 1991

NSN 5120-99-605-8797 996058797 INSERTER,SEAL

5120-99-605-8797
Seal Inserter

996058797
AO272629: RNCC: 3 | RNVC: 2

20 Aug 2002

NSN 5120-99-646-4977 996464977 TOOL,TY-RAP

5120-99-646-4977
Ty-Rap Tool

996464977
WT193A: RNCC: 3 | RNVC: 2
WT193: RNCC: 5 | RNVC: 2
ERG 299: RNCC: 6 | RNVC: 9

25 Apr 1991

NSN 5120-99-168-8936 991688936 PULLER ATTACHMENT,MECHANICAL

5120-99-168-8936
Mechanical Puller Attachment

991688936
S3S 18129000 ISS E: RNCC: 3 | RNVC: 1
S3S 18129000: RNCC: 5 | RNVC: 1

25 Jul 1994

NSN 5120-99-535-9589 995359589 WRENCH,OPEN END

5120-99-535-9589
Open End Wrench

995359589
HU27566: RNCC: 3 | RNVC: 2

17 Dec 2001

NSN 5120-99-767-5280 997675280 PAD,PRESS

5120-99-767-5280
Press Pad

997675280
460001764: RNCC: 3 | RNVC: 2

25 Apr 1991

NSN 5120-99-244-8729 992448729 TOOL,LOCK COLLAR

5120-99-244-8729
Lock Collar Tool

992448729
HD-70368: RNCC: 3 | RNVC: 2

22 Jul 2005

NSN 5120-99-664-0289 996640289 PULLER,MECHANICAL

5120-99-664-0289
Mechanical Puller

996640289
HU27818: RNCC: 3 | RNVC: 2

25 Jun 1998

NSN 5120-99-850-3760 998503760 TOOL,CHAIN LINK JOINING

5120-99-850-3760
Chain Link Joining Tool

998503760
6604034: RNCC: 3 | RNVC: 2

23 Apr 1993

NSN 5120-99-762-0805 997620805 PULLER,RATCHET LEVER,CABLE TYPE

5120-99-762-0805
Cable Type Ratchet Lever Puller

997620805
42/T532D: RNCC: 3 | RNVC: 2
G000/5570 ITEM 15: RNCC: 5 | RNVC: 2
G000/5570/15: RNCC: 5 | RNVC: 2

29 Jul 2002

NSN 5120-99-357-7727 993577727 REMOVER,SEAL

5120-99-357-7727
Seal Remover

993577727
HU24706: RNCC: 3 | RNVC: 2

22 Jul 1999

NSN 5120-99-665-9502 996659502 PULLER,MECHANICAL

5120-99-665-9502
Mechanical Puller

996659502
E320: RNCC: 3 | RNVC: 2

7 May 2003

NSN 5120-99-661-9469 996619469 PULLER,MECHANICAL

5120-99-661-9469
Mechanical Puller

996619469
S3S18416000: RNCC: 3 | RNVC: 1

14 Mar 1995

NSN 5120-99-930-6632 999306632 ADAPTER,TORQUE WRENCH

5120-99-930-6632
Torque Wrench Adapter

999306632
S3S18117000: RNCC: 3 | RNVC: 1

3 May 1994

NSN 5120-99-352-4151 993524151 O RING ASSEMBLY TOO

5120-99-352-4151
O Ring Assembly Too

993524151
83700083: RNCC: 3 | RNVC: 2

27 Mar 1998

NSN 5120-99-990-0055 999900055 BULLET,SEAL

5120-99-990-0055
Seal Bullet

999900055
K1P443A0002: RNCC: 3 | RNVC: 2

16 Jul 1999

NSN 5120-99-617-5817 996175817 CROWFOOT ATTACHMENT,SOCKET WRENCH

5120-99-617-5817
Socket Wrench Crowfoot Attachment

996175817
S3S20308000: RNCC: 3 | RNVC: 2
HU23575: RNCC: 5 | RNVC: 9

25 Apr 1991

NSN 5120-99-446-3882 994463882 WRENCH,SPANNER

5120-99-446-3882
Spanner Wrench

994463882
1022311: RNCC: 3 | RNVC: 2

14 Aug 1996

NSN 5120-99-611-9701 996119701 SOCKET,WRENCH,FACE SPANNER

5120-99-611-9701
Face Spanner Wrench Socket

996119701
NTS13686: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-832-8303
Propeller Blade Bat

998328303
DAPT60-0021-00: RNCC: 3 | RNVC: 2

12 Mar 1998

5120-99-930-2008
Hand Hydraulic Jack

999302008
ZHF200: RNCC: 3 | RNVC: 2
870-44604: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-179-5296
Crankshaft Turning

991795296
892/01147: RNCC: 3 | RNVC: 2

22 Jan 2007

5120-99-133-7532
Spanner Wrench

991337532
AMP 00 06 01058: RNCC: 1 | RNVC: 2
9515.W091: RNCC: 3 | RNVC: 2
60202891: RNCC: 5 | RNVC: 2
NO.776C(60X90)X6 HINGE HOOK PIN: RNCC: 5 | RNVC: 2

11 Jul 2006

5120-99-244-4563
Box Wrench

992444563
320/00925: RNCC: 3 | RNVC: 2

16 Aug 2012

5120-99-965-2687
Box Wrench

999652687
CM8983: RNCC: 3 | RNVC: 2
GR1-11955-118: RNCC: 5 | RNVC: 2
137/NM32426: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-133-8342
Preformed Packing Remover

991338342
892/01154: RNCC: 3 | RNVC: 2

23 Jan 2007

5120-99-152-0026
Install/Remove Tool

991520026
NG-114: RNCC: 3 | RNVC: 2

23 Feb 2011

5120-99-724-2995
Wrench/Reaction Too

997242995
EA6305G661-041: RNCC: 3 | RNVC: 2
1MEVGU2: RNCC: 6 | RNVC: 9

22 Jul 2004

5120-99-957-8632
Square Drive 1 1/2

999578632
NO PRIMARY REF 99-957-8632: RNCC: 3 | RNVC: 2
16295: RNCC: 5 | RNVC: 2
C576-70T269187: RNCC: 6 | RNVC: 9

8 Jun 2002

5120-99-665-6158
5/32 Ball Tip Allen

996656158
3120/21288-2: RNCC: 3 | RNVC: 2
020WU-001: RNCC: 6 | RNVC: 9

2 Apr 2002

5120-99-311-2962
L/H Front Jack

993112962
BW96728-1: RNCC: 3 | RNVC: 2

15 Nov 1990

5120-99-340-5010
Ic Tester/Extractor

993405010
178-270: RNCC: 3 | RNVC: 2

12 Mar 1999

5120-99-701-9396
Skirt Extraction/In

997019396
517-025-026: RNCC: 3 | RNVC: 2

19 Apr 1995

5120-99-679-8792
Piston/Connecting R

996798792
020150 R1 DL09254: RNCC: 3 | RNVC: 2

4 Sep 2009

5120-99-707-3641
Install/Remove Tool

997073641
6D61354-004: RNCC: 3 | RNVC: 2

23 Feb 2011

5120-99-300-4814
Setting/Adjusting T

993004814
999 8105-2: RNCC: 3 | RNVC: 2

3 Jul 1992

5120-99-783-1199
Remouer/Replacer Sw

997831199
LC349: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-550-0836
Flare/Cutter Kit

5120-99-564-8460
Installer/Remover

995648460
14-032: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-660-6896
Pump/Injector Maint

996606896
YN74930: RNCC: 3 | RNVC: 2

14 Jun 2000

5120-99-362-3460
Insertion/Remov Kit

993623460
ER9305G018-041: RNCC: 3 | RNVC: 2
1MEVFJ1: RNCC: 6 | RNVC: 9

31 Jan 2004

5120-99-734-0164
V Inserter/Remover

997340164
453-7408-004: RNCC: 3 | RNVC: 2
21-076: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-734-7389
Insertion/Remo Tool

5120-99-783-1195
Oi Remover/Replacer

997831195
LC378: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-466-5766
Extraction/Rep Tool

994665766
9002-1856: RNCC: 3 | RNVC: 2

26 Nov 1999

5120-99-275-5032
Socket Deep 36Mm-1/

992755032
NO PRIMARY REF 99-275-5032: RNCC: 3 | RNVC: 2
SIMM360: RNCC: 5 | RNVC: 2
C569-70T279789: RNCC: 6 | RNVC: 9

8 Jun 2002

5120-99-238-9103
Drill/Reamer Jig

992389103
NO PRIMARY REF 99-238-9103: RNCC: 3 | RNVC: 2
64DE655: RNCC: 5 | RNVC: 2

2 Aug 2005

5120-99-793-4287
B Remover/Installer

5120-99-242-9364
Insertion/Extr Tool

992429364
2169B0001: RNCC: 3 | RNVC: 2

24 Mar 2009

5120-99-725-5009
Be Remover/Replacer

997255009
JCB992/07602: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-725-6344
Seal Extractor/Repl

997256344
892/00124: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-788-7119
V Remover/Installer

997887119
21-021: RNCC: 3 | RNVC: 2
21-021A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-459-9642
Inserter/Extractor

994599642
CBD13165G01: RNCC: 3 | RNVC: 2

19 Dec 2002

5120-99-734-0162
Extractor/Aligner

997340162
453-7408-183: RNCC: 3 | RNVC: 2
21-070: RNCC: 5 | RNVC: 2
21-070: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-337-6259
Install/Remove Tool

993376259
6D61354-002: RNCC: 3 | RNVC: 2

23 Feb 2011

5120-99-738-8427
Install/Remove Tool

997388427
6D61354-003: RNCC: 3 | RNVC: 2

23 Feb 2011

5120-99-788-7122
V Remover/Installer

997887122
21-533: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-758-8558
S Installer/Remover

997588558
14-011: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-787-7917
Setting/Extrac Tool

997877917
27599: RNCC: 3 | RNVC: 2

20 Nov 1987

5120-99-666-2624
Remove/Installa Kit

996662624
EA5305G520-041: RNCC: 3 | RNVC: 2
1MEVH2Q: RNCC: 6 | RNVC: 9

22 Sep 2004

5120-99-143-4993
R/H Front Jack

991434993
BW96729-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-729-3880
Insertion/ Tool Kit

997293880
697/1/02788/000: RNCC: 3 | RNVC: 2
AGC517: RNCC: 5 | RNVC: 2
UW214C: RNCC: 6 | RNVC: 9

18 Feb 1994

5120-99-168-6297
Yoke/Flange Adaptor

991686297
0485187: RNCC: 3 | RNVC: 2
LC.1022: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-238-1680
Remove/Insta Wrench

992381680
EC6505G501-101: RNCC: 3 | RNVC: 2

19 Mar 2004

5120-99-497-2339
Insertion/Extr Tool

994972339
BL/D8708: RNCC: 3 | RNVC: 2
BL/D8708: RNCC: 5 | RNVC: 2

12 May 2003

5120-99-819-8991
Mechan Press/Puller

998198991
SGE3210-1300: RNCC: 3 | RNVC: 2
12825-009: RNCC: 6 | RNVC: 9

29 May 2012

5120-99-355-4771
Install/Remove Tool

993554771
6D61354-001: RNCC: 3 | RNVC: 2

23 Feb 2011

5120-99-622-4094
Locator/Wire Stop

996224094
169403: RNCC: 3 | RNVC: 2
169403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-843-3492
Inserter/Extra Tool

998433492
P422-25A: RNCC: 3 | RNVC: 2
G0015013: RNCC: 5 | RNVC: 2
083CL-002: RNCC: 6 | RNVC: 9

12 Aug 2008

5120-99-725-6341
Pi Remover/Replacer

997256341
JCB992/07614: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-300-0202
Bu Remover/Replacer

5120-99-339-5311
Inserted Hammer Face

993395311
SC2: RNCC: 3 | RNVC: 2

31 Oct 2012

5120-99-244-8368
Holding Plate

992448368
12RPH70844: RNCC: 3 | RNVC: 2

14 Mar 1997

5120-99-977-0540
Box Wrench

999770540
9RBM1214: RNCC: 3 | RNVC: 2
9RBM1214: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-4687
Pliers

991204687
BS3087F1G4: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-593-2818
Cup Plug Driver

995932818
3823520: RNCC: 3 | RNVC: 2
FH9804S0005: RNCC: 6 | RNVC: 9

10 Jul 1998

5120-99-395-8108
Mechanical Puller

993958108
Y3J70995: RNCC: 3 | RNVC: 2
A1025170: RNCC: 5 | RNVC: 9

7 Feb 2001

5120-99-517-0532
Insertion-Extractio

995170532
163: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-687-3320
Injector Socket

996873320
B741A0039: RNCC: 3 | RNVC: 2

17 Sep 2013

5120-99-611-0449
Face Spanner Wrench Socket

996110449
1379006P: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-614-8694
Pin Punch

996148694
HST120: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-175-1665
Pin Extraction Shim

991751665
AMP 00 06 50003: RNCC: 3 | RNVC: 2

26 Jul 2011

5120-99-617-1751
Mechanical Puller

996171751
HU17204: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-718-4359
Offset Screwdriver

997184359
H21799: RNCC: 1 | RNVC: 2
2049: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-423-1021
Hydra Bleeder Valve

994231021
B162: RNCC: 3 | RNVC: 2
4Q2865: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-282-1021
Crowfoot Attachment

992821021
J5358FL: RNCC: 3 | RNVC: 2
UWS4B: RNCC: 6 | RNVC: 9

17 Aug 2000

5120-99-252-7424
Valve Guid Replacer

992527424
GA5019: RNCC: 3 | RNVC: 2
GA5019: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-277-5804
Clutc Aligning Tool

992775804
013701: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-400-2348
Open End Wrench

994002348
MBEU58069: RNCC: 3 | RNVC: 2
MBEU58069: RNCC: 5 | RNVC: 2

1 Oct 2009

5120-99-437-5860
Drive Pin Punch

994375860
MCD33548PAT1985: RNCC: 3 | RNVC: 2
0275-1985: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-873-8001
Rear Guide And Seal

998738001
270304: RNCC: 3 | RNVC: 2
270304: RNCC: 5 | RNVC: 2
270304: RNCC: 5 | RNVC: 2
LV7RU270304: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-835-5832
Oil Seal Replacer

998355832
PD141: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-437-5866
Drive Pin Punch

994375866
MCD33548PAT1993: RNCC: 3 | RNVC: 2
0275-1993: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-836-3225
Hydraulic Jack Handle

998363225
CAL6442: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-414-1858
Starb Plate Support

5120-99-870-0735
Socket Wrench Handle

998700735
A1039011: RNCC: 3 | RNVC: 2
STAHWILLIE 13160000503: RNCC: 5 | RNVC: 2

23 Apr 2001

5120-99-667-5579
Pin Inserter

996675579
MC1269090: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-964-8250
Re Combination Tool

999648250
0S2493GA: RNCC: 3 | RNVC: 2
SS30T200: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-456-8394

5120-99-456-8391

5120-99-710-7747
Socket Wrench Handle Bar

997107747
100A501009A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-301-9992
Socket Wrench Socket

993019992
SFM8 LOCK ON: RNCC: 3 | RNVC: 2

29 Jul 1997

5120-99-558-8372
Box Wrench

995588372
BM31700: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-466-5503
Socket Wrench Socket

994665503
ESS 205: RNCC: 3 | RNVC: 2
A4761: RNCC: 5 | RNVC: 1
1L348: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-733-6684
Primer Ring Removal

997336684
3073/428: RNCC: 3 | RNVC: 2

19 Mar 1990

5120-99-521-7986
Socket Wrench

995217986
B27791: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-6757
Spanner Wrench

994656757
T77842: RNCC: 3 | RNVC: 2
PE50036: RNCC: 5 | RNVC: 2
64DE46: RNCC: 6 | RNVC: 9
64DE46: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-2672
Oil Seal Re Adaptor

994012672
18G134N: RNCC: 3 | RNVC: 2
16C6054: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-467-5393
Hand Clamp

994675393
MT1517: RNCC: 3 | RNVC: 2
27Q27347: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-624-1509
Hand Terminal Crimping Tool

996241509
59524: RNCC: 3 | RNVC: 2
C59524: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-607-6098
Torque Wrench Adapter

996076098
PE 28985: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-001-1963
Torque Wrench Adapter

990011963
JA5612: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-823-8412
Hub Nut Spanner

998238412
21011428: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-328-8662
Face Spanner Wrench Socket

993288662
MBEU82573: RNCC: 3 | RNVC: 2
MBEU82573: RNCC: 5 | RNVC: 2

27 Jul 1995

5120-99-801-8793
Retaining Ring Pliers

998018793
FV532286: RNCC: 3 | RNVC: 2
AT619: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-802-6932
Sealing Plug Tool

998026932
FV559313: RNCC: 3 | RNVC: 2

24 May 1977

5120-99-657-1787
Face Spanner Wrench Socket

996571787
1944T405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-1899
Mechanical Puller

996171899
HU18169: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-468-3723
Strap Spanner

994683723
015500: RNCC: 3 | RNVC: 2

8 Oct 1998

5120-99-700-7157
Cage Cleaning Tool

997007157
PC24250: RNCC: 3 | RNVC: 2
PC24250: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-841-5657

5120-99-826-8849

5120-99-812-3937

5120-99-168-8049
Screwdriver Bit

991688049
08050231: RNCC: 3 | RNVC: 2
603-902: RNCC: 5 | RNVC: 2

25 Feb 1993

5120-99-219-6765
Torque Wrench

992196765
13042: RNCC: 3 | RNVC: 2

21 Jun 2005

5120-99-122-5118
Socket Wrench Socket

991225118
KSDH201: RNCC: 3 | RNVC: 2
1700021: RNCC: 5 | RNVC: 2
T2BJ5252: RNCC: 5 | RNVC: 2
1L503: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-0398
Hand Terminal Crimping Tool

991300398
19600: RNCC: 3 | RNVC: 2
3A3718: RNCC: 6 | RNVC: 9
19600: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-837-7296
Pressure Test Kit

998377296
J9273: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-839-5199
Spanner Wrench

998395199
FV 1069376: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-1544
Spanner Wrench

996551544
460009312B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-179-7104
Spanner

991797104
883015: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-9156
Boiler Tube Wire Brush

997109156
T1273D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-400-5171
Hand Hammer

994005171
HAMMER CREASING 300G: RNCC: 3 | RNVC: 2

5 Nov 2009

5120-99-406-2533
Clinching Pun Block

994062533
F3BLOCK1: RNCC: 3 | RNVC: 2
28FP430: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-406-2536
Turnlock Fastener Clinching Punch

994062536
F3TOOL1: RNCC: 3 | RNVC: 2
28FP433: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-4598
Box Wrench

994234598
19328: RNCC: 3 | RNVC: 2
558654: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6049
Open End Wrench

999106049
BS192: RNCC: 4 | RNVC: 1
FA17133: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-713-2234
Socket Wrench Socket

997132234
PE 8663: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-340-2848
Quick Adjusting Screw Clamp

993402848
MC1326300: RNCC: 3 | RNVC: 2
072FV0097: RNCC: 6 | RNVC: 9

9 Aug 2006

5120-99-811-6812

5120-99-832-2004

5120-99-710-7018
Open End Wrench

997107018
D1617: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-930-5577
Spanner Wrench

999305577
T2002: RNCC: 3 | RNVC: 2

10 Oct 1991

5120-99-951-8503
Socket Spann Socket

999518503
TMUSM8: RNCC: 3 | RNVC: 2
TMUSM8: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-450-3381
Base

994503381
062 006: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-117-7888
Open End Wrench

991177888
811546: RNCC: 3 | RNVC: 2
SK3158: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-416-3259
Nose Torque Spanner

994163259
NKR753: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-835-5833
Spanner Rear Hub Nu

5120-99-967-5186
Valve Gear Support

999675186
PC19191: RNCC: 3 | RNVC: 2
PC19191: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-977-1911
Torque Asse Adaptor

999771911
01TC11012: RNCC: 3 | RNVC: 2
01TC11012: RNCC: 6 | RNVC: 9

14 Sep 1989

5120-99-978-1585
Screwdriver Bit

999781585
1USB4M: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-1612
Socket Head Screw Key

991301612
MS3: RNCC: 3 | RNVC: 2
MS3: RNCC: 5 | RNVC: 2
1C8080: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-835-6442
Socket Wrench

998356442
VR2070: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-834-9638
Leveling-Support Jack

998349638
PN00001737: RNCC: 3 | RNVC: 2

4 Apr 2008

5120-99-453-7278
Socket Wrench Socket

994537278
UM11918: RNCC: 3 | RNVC: 2
64AD19: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-300-9484
Adjusting Spanner

993009484
NT680: RNCC: 3 | RNVC: 2

29 Apr 2004

5120-99-192-0967
Inspection Mirror

991920967
UV 18: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-930-8132
Housing

999308132
FV 2193459: RNCC: 3 | RNVC: 2

17 Feb 1998

5120-99-978-1587
Screwdriver Bit

999781587
1USB6: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-7964
Open End Wrench

999107964
BS2583: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-646-0652
Socket Wrench

996460652
830314: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-979-2872
Socket Wrench Screwdriver Attachment

999792872
05060018: RNCC: 3 | RNVC: 9

14 Nov 2011

5120-99-838-1894
Puller.

998381894
1002VLC: RNCC: 3 | RNVC: 2
083100: RNCC: 5 | RNVC: 2
983100: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-838-4800
Crankshaft Replacer

998384800
LC178A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-4416
Hand Leather Creaser

999104416
H510: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-837-7805
Drive Block Pressin

998377805
AM29364: RNCC: 3 | RNVC: 2

3 Jan 2013

5120-99-956-8527
Box Wrench

999568527
CX1012: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-958-0674
Preset Screwdriver

999580674
015502030860: RNCC: 3 | RNVC: 2
A26790: RNCC: 5 | RNVC: 2
NPPOGAMA4B2080405: RNCC: 6 | RNVC: 9

1 Jun 2005

5120-99-956-4842
Torque Wrench Adapter

999564842
29712: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-99-838-2151
Socket Wrench Screwdriver Attachment

998382151
55665: RNCC: 3 | RNVC: 2
DRAPER 55665: RNCC: 5 | RNVC: 2
CV177389: RNCC: 5 | RNVC: 2

23 Mar 2011

5120-99-102-3685
Open End Wrench

991023685
A33783: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-531-2567
Tee Key

995312567
34405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-877-1012
Wrench Bar

998771012
1538: RNCC: 3 | RNVC: 2
38: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-831-9992
Torque Wrench Adapter

998319992
FV839318: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-842-2454
Blade Bat

998422454
TL5594: RNCC: 3 | RNVC: 2

10 Feb 1995

5120-99-710-7654
Socket Wrench Crowfoot Attachment

997107654
KU.12683: RNCC: 3 | RNVC: 2
RT20872: RNCC: 5 | RNVC: 2
64TN5: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4294
Blacksmith's Anvil

999104294
DEF1166: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-607-9667
Bearing And Driver

996079667
PE54329: RNCC: 3 | RNVC: 2
PE54329: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-414-1855

5120-99-748-1007
Body

997481007
P-891065-001: RNCC: 3 | RNVC: 2
P891065-001: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-654-2980
Mechanical Puller

996542980
P-890145-407: RNCC: 3 | RNVC: 2
P890145-407: RNCC: 5 | RNVC: 2

7 Feb 1980

5120-99-100-8540
Attachment Spanner

991008540
NO PRIMARY REF 99-100-8540: RNCC: 3 | RNVC: 2
A23233: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-536-5963
Socket Wrench

995365963
025703: RNCC: 3 | RNVC: 2
360-246082: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-724-1392
Closing Too Support

997241392
U588-9000-001: RNCC: 3 | RNVC: 2
PIE067-7000-ASY: RNCC: 5 | RNVC: 2
U588-9000-001: RNCC: 5 | RNVC: 2
ASMTS1: RNCC: 6 | RNVC: 9

3 Jan 2003

5120-99-620-8473
Elec Alignment Tool

996208473
NO PRIMARY REF 99-620-8473: RNCC: 3 | RNVC: 2
ET16454: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-511-0304
Tool

995110304
NO PRIMARY REF 99-511-0304: RNCC: 3 | RNVC: 2
3068147: RNCC: 5 | RNVC: 2
C574-LWM020614: RNCC: 6 | RNVC: 9

20 Jun 2001

5120-99-607-9172
Drift

996079172
NO PRIMARY REF 99-607-9172: RNCC: 3 | RNVC: 2
PE9036: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-372-5063
Socket Pin Test Tip

993725063
67-023-01: RNCC: 3 | RNVC: 2

9 Nov 2006

5120-99-910-4716
Hand Hammer

999104716
W163-3LB: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
W163-3LB: RNCC: 6 | RNVC: 9
0274: RNCC: 6 | RNVC: 9
1B1389: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-149-0132
Spring Compressor

991490132
NO PRIMARY REF 99-149-0132: RNCC: 3 | RNVC: 2
460001569: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-931-3097
Mechanical Puller

999313097
NO PRIMARY REF 99-931-3097: RNCC: 3 | RNVC: 2
94307: RNCC: 5 | RNVC: 2
94307: RNCC: 5 | RNVC: 9

28 Jan 2010

5120-99-568-5917
Spanner Wrench

995685917
EA3405G010-041: RNCC: 3 | RNVC: 2

25 Jun 1998

5120-99-700-7886
Hexagon Bit

997007886
030100: RNCC: 3 | RNVC: 2
042B6-002: RNCC: 6 | RNVC: 9

17 Jul 2004

5120-99-910-4335
Digging Bar

999104335
UKSC4576: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 28: RNCC: 5 | RNVC: 1
A3-9797: RNCC: 5 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
H126: RNCC: 6 | RNVC: 9
F1FA10150: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-517-2078
Socket Wrench Handle Bar

995172078
100175-6968-002: RNCC: 3 | RNVC: 2
100175-6968-002: RNCC: 5 | RNVC: 2
UW145E4: RNCC: 6 | RNVC: 9

17 Jan 1995

5120-99-924-5779
Socket Wrench Handle Bar

999245779
85-25-19-10-1010: RNCC: 3 | RNVC: 2
TBP208L: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-659-6883
Mechanical Puller

996596883
48415-A47/405: RNCC: 3 | RNVC: 2
48415A47-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-894-8924
Mechanical Puller Attachment

998948924
NO PRIMARY REF 99-894-8924: RNCC: 3 | RNVC: 2
94358: RNCC: 5 | RNVC: 2
94358: RNCC: 5 | RNVC: 9

29 Jan 2010

5120-99-133-5764
Tool Support

991335764
NO PRIMARY REF 99-133-5764: RNCC: 3 | RNVC: 2
T86462: RNCC: 5 | RNVC: 2
36FF31535: RNCC: 6 | RNVC: 9

23 Aug 2005

5120-99-707-2572
Spanner

997072572
NO PRIMARY REF 99-707-2572: RNCC: 3 | RNVC: 2
01557: RNCC: 5 | RNVC: 2

9 Jun 2004

5120-99-910-4609
Smith Bottom Fuller

999104609
NO PRIMARY REF 99-910-4609: RNCC: 3 | RNVC: 2
H910: RNCC: 5 | RNVC: 2
FA13735: RNCC: 6 | RNVC: 9

4 Feb 1984

5120-99-520-9265
S Adaptor-Extension

995209265
FABLM5: RNCC: 3 | RNVC: 2
FABLM5: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-4638
B Riveter Nosepiece

991204638
H5932: RNCC: 2 | RNVC: 2
13176A: RNCC: 3 | RNVC: 2
13033C3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-149-1362
Socket Wrench Socket

991491362
460003630: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-792-5337
Slide Hammer

997925337
07150800: RNCC: 3 | RNVC: 2
07150800: RNCC: 5 | RNVC: 2
07150800: RNCC: 5 | RNVC: 2
150800: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-721-6224
Socket Head Scr Key

5120-99-664-0069

5120-99-145-0608

5120-99-782-8187
Tool Kit

997828187
71671745610: RNCC: 3 | RNVC: 2
H21279: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-871-7979
Socket Head Screw Key

998717979
1028-8273: RNCC: 3 | RNVC: 2

4 Nov 2003

5120-99-773-6713
Bearing And Bushing Driver Plug

997736713
460009421-4C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-928-3276
Socket

999283276
SK10769: RNCC: 3 | RNVC: 2
FJ992580016: RNCC: 6 | RNVC: 9

11 Jan 2000

5120-99-828-2487
Engine Fron Bracket

998282487
FV855121: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-882-6052
Torque Wrench

998826052
24-8775: RNCC: 3 | RNVC: 2

6 Dec 2003

5120-99-407-8458

5120-99-644-3158

5120-99-828-5630
Mechanical Puller

998285630
MS3072: RNCC: 3 | RNVC: 2
MS3072A: RNCC: 5 | RNVC: 2
SKF3765: RNCC: 5 | RNVC: 2
TA9117: RNCC: 5 | RNVC: 2
16C6567: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-808-1329
Spanner Wrench

998081329
FV 572588: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-788-3186
Socket Wrench

997883186
001253040: RNCC: 3 | RNVC: 2
352-462D: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-795-7436
Puller And Replacer

997957436
RG566: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-796-7772
Socket Wrench Socket

997967772
336.100.269: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-777-7233
Socket Wrench Adapter

997777233
T2EA1009: RNCC: 3 | RNVC: 2
T2SHEETEA 1009: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-799-5928
Mechanical Puller

997995928
460003918: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-804-3130
Socket Spanner

998043130
543344: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-792-5776
Bearing And Bushing Driver

997925776
PE57372: RNCC: 3 | RNVC: 2
PE57372: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-253-8842

5120-99-445-4565

5120-99-415-3018
Drill Wrench

5120-99-120-0930

5120-99-104-5277
Socket Wrenc Socket

5120-99-760-2192
Open End Box Wrench

997602192
RX30: RNCC: 3 | RNVC: 2
AT61530: RNCC: 5 | RNVC: 2
RX30: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-255-0166
Bearing And Bushing Driver Plug

992550166
4490.096.0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-826-6409

5120-99-775-3751

5120-99-961-9610

5120-99-825-3203
Seal Inserter

998253203
WE2700: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-937-5681
Torque Wrench

999375681
13045: RNCC: 3 | RNVC: 2
MODEL 100 13045: RNCC: 5 | RNVC: 2
MODEL 100 13045: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-826-0801
Insertion Tool

998260801
VT10670: RNCC: 3 | RNVC: 2

3 Oct 1977

5120-99-826-8488
Torque Wrench Adapter

998268488
VT13470: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-828-3302
Open End Wrench

998283302
FV 738592: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-834-6000
Socket Wrench Socket

998346000
SWM241 LOCKON: RNCC: 3 | RNVC: 2

11 Mar 1993

5120-99-838-5832
Mechanical Puller

998385832
VR2176: RNCC: 3 | RNVC: 2
AST-B109: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-837-5372
Brake Bleede Handle

998375372
B7846: RNCC: 3 | RNVC: 2
ATB 7846: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-252-4778
Screw Extractor

992524778
REX107: RNCC: 3 | RNVC: 2
1G/897: RNCC: 6 | RNVC: 9
REX107: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-826-4359
Spanner Ring Specia

998264359
EMERTKDVEH1213CHAP2F1G11: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-826-0838
Press Tool

998260838
VT10545: RNCC: 3 | RNVC: 2

24 Aug 1977

5120-99-841-0327
Caulking Gun

998410327
KENNET: RNCC: 3 | RNVC: 2

27 Apr 2004

5120-99-837-1198
Torque Wrench Adapter

998371198
AMP 00 06 30003: RNCC: 3 | RNVC: 2

26 Jul 2011

5120-99-826-6608
Spanner Locknut

998266608
FV1051662: RNCC: 3 | RNVC: 2
112520ST: RNCC: 5 | RNVC: 2

24 Jan 1983

5120-99-460-8068
Socket Wrench Extension

994608068
A79855: RNCC: 3 | RNVC: 2
ST50253: RNCC: 5 | RNVC: 2
64AL424: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-456-0186
Assembly Tool

994560186
P021120: RNCC: 3 | RNVC: 2
D8179: RNCC: 5 | RNVC: 2
D8179: RNCC: 5 | RNVC: 2
WE128B1: RNCC: 6 | RNVC: 9

19 Apr 2000

5120-99-051-6076
Torque Wrench Adapter

990516076
29761: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-99-138-6555
Flat Tip Screwdriver

991386555
04940.0: RNCC: 3 | RNVC: 2
SD1 04940.0: RNCC: 5 | RNVC: 2
682A0003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-0540
Hand Terminal Crimping Tool

991370540
45740-2: RNCC: 3 | RNVC: 2
1H791: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-668-6217
Socket Wrench Set

996686217
S910: RNCC: 3 | RNVC: 2

16 Oct 2012

5120-99-737-3067
Socket Wrench Socket

997373067
ED1125: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-923-8149
Socket Wrench Handle

999238149
M50: RNCC: 3 | RNVC: 2
0277-277001: RNCC: 6 | RNVC: 9
0277-923-8149: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-127-2847
Socket Wrench

991272847
A1141001: RNCC: 3 | RNVC: 2

23 Apr 2001

5120-99-406-3433
Open End Wrench

994063433
SLW 622: RNCC: 3 | RNVC: 2
T2AB4117: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-828-2486
Gearbox Sup Bracket

998282486
FV855120: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-244-7425
Termi Crimping Tool

5120-99-333-1300

5120-99-470-4330

5120-99-633-9529

5120-99-534-5565
Mechanical Puller

5120-99-214-4089
Hub Nut Tool

5120-99-320-2582
Socket Wrenc Socket

5120-99-793-8356
Insertion Tool Prot

997938356
3201-89118-01-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-740-6804
Valv Adjusting Tool

997406804
90890-07710: RNCC: 3 | RNVC: 2
100581: RNCC: 5 | RNVC: 2
90890-07710: RNCC: 5 | RNVC: 2

12 Feb 1996

5120-99-466-9219
Socket Wrench

994669219
NO PRIMARY REF 99-466-9219: RNCC: 3 | RNVC: 2
2: RNCC: 5 | RNVC: 1
1L185: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-509-7190
Face Spanner Wrench Socket

995097190
HU17448-01: RNCC: 3 | RNVC: 2

10 Jul 2003

5120-99-424-1002
Mechanical Jack Handle

994241002
C236626: RNCC: 3 | RNVC: 2
C236626: RNCC: 5 | RNVC: 9
26FX95815: RNCC: 6 | RNVC: 9
26FX95815: RNCC: 6 | RNVC: 9

15 Oct 1979

5120-99-593-2433
Socket Head Screw Key

995932433
4KSM11F15: RNCC: 3 | RNVC: 2

8 Jul 1992

5120-99-719-2667
Open End Wrench

997192667
3AA35553: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-713-9285
Mechanical Puller

997139285
PE3925: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-758-6039
Socket Head Scr Key

5120-99-641-9941
Socket Wrenc Socket

5120-99-546-5258

5120-99-763-8447

5120-99-629-5175

5120-99-427-9245
Storage Case

994279245
13041: RNCC: 3 | RNVC: 2
3A3686: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-220-9403
Torque Wrench Adapter

992209403
LMT3318-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-315-1213
Torque Wrench

993151213
011035: RNCC: 3 | RNVC: 1
TSN55 + 031340: RNCC: 5 | RNVC: 1

14 Feb 2007

5120-99-866-9668

5120-99-867-2791

5120-99-349-4965
Sleeve Inpu Adaptor

993494965
1X56 137 101: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-654-4103
Torque Wrench Adapter

996544103
460009133C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-434-7690
Locking Device

994347690
VTR400 (10716): RNCC: 3 | RNVC: 2

10 Sep 2012

5120-99-536-9724
Open End Wrench

995369724
TZ.499 221: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-9177
Ratchet Wrench

991209177
LEYTOOLREVERSIBLE3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-831-1619
Oil Seal Replacer

5120-99-812-4021

5120-99-538-6399

5120-99-834-8244

5120-99-542-8972
Open End Wrench

5120-99-465-8709
Locator

994658709
613904: RNCC: 3 | RNVC: 2
1H664: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-6584
Socket Wrench Socket

991206584
EB710: RNCC: 3 | RNVC: 2
H20912: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9
0277-277011: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-4840
Pipe Wrench

991204840
H6250: RNCC: 2 | RNVC: 9

25 Apr 1991

5120-99-837-9878
Sepa Connector Tool

998379878
MP6816/4: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-433-5347
Pliers

994335347
V1744: RNCC: 3 | RNVC: 2
CA1772: RNCC: 5 | RNVC: 2
5J3358: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-962-3565

5120-99-451-0232
Extractor

994510232
T336907: RNCC: 3 | RNVC: 2
10101-6: RNCC: 5 | RNVC: 2
5W6407: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-465-8643
Socket Wrench

994658643
BN6981: RNCC: 3 | RNVC: 2
64BB2: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-2163
Open End Wrench

991242163
5J1821: RNCC: 3 | RNVC: 2
FB207273: RNCC: 5 | RNVC: 2
1C7475: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-617-1765
Face Spanner Wrench Socket

996171765
HU.17220: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-205-8280
Pump Plunger

992058280
GMA54517: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-750-2586
Socket Spanner Atta

5120-99-754-1080

5120-99-734-7400

5120-99-766-1936
Spanner Wrench

5120-99-754-9282
Box Wrench

5120-99-762-6934

5120-99-763-8440

5120-99-956-9132
Socket Wrenc Socket

5120-99-759-5844
Torque Wren Adapter

5120-99-758-0264
Box And Open Wrench

5120-99-784-8645

5120-99-732-4549

5120-99-942-5968

5120-99-763-9176
Spanner Wrench

5120-99-956-2446
Socket Head Scr Key

5120-99-607-6355
Mechanical Puller

996076355
S3S11577000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-607-9284
Fi Open Jaw Spanner

996079284
PE51622: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-5306
High Pressure Punch

996175306
HU23073: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-127-6118
Box Wrench

991276118
DDA224: RNCC: 3 | RNVC: 2
2RB7587: RNCC: 5 | RNVC: 2
851705: RNCC: 6 | RNVC: 9
0X2428: RNCC: 6 | RNVC: 9
GSIPTGAMA4B2170306FACOM: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-481-9647
Preset Screwdriver

994819647
015502030500: RNCC: 3 | RNVC: 2
A26840: RNCC: 5 | RNVC: 2
NPPOGAMA4B2080405: RNCC: 6 | RNVC: 9

1 Jun 2005

5120-99-607-8469
Mechanical Puller

996078469
PE 53303: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-542-0848
Spanner Wrench

995420848
T424: RNCC: 3 | RNVC: 2

25 Apr 1991

Load More Results