What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 88 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 88 of 108

5120-99-700-6434
Sock Wrench Key Set

5120-99-411-8986
Special Tool

994118986
NO PRIMARY REF 99-411-8986: RNCC: 3 | RNVC: 2
ST2446: RNCC: 5 | RNVC: 9
27Q15544: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-608-7434
Fuel Tran Extractor

996087434
NO PRIMARY REF 99-608-7434: RNCC: 3 | RNVC: 2
HU11234: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-810-6866
Installer Assembly

998106866
NO PRIMARY REF 99-810-6866: RNCC: 3 | RNVC: 2
1U8843: RNCC: 5 | RNVC: 2
5M2196: RNCC: 5 | RNVC: 9

14 Feb 1990

5120-99-132-2030
Alignment Template

991322030
5653500: RNCC: 3 | RNVC: 2
S5.6535/00: RNCC: 5 | RNVC: 2

27 Jul 2000

5120-99-431-3392

5120-99-433-4424

5120-99-608-6017
Tang Removal Pliers

996086017
NO PRIMARY REF 99-608-6017: RNCC: 3 | RNVC: 2
GU17969: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-245-1151
Drill Guide

992451151
182/01339: RNCC: 3 | RNVC: 2
SM765A: RNCC: 6 | RNVC: 9

5 Dec 1996

5120-99-765-9619
Socket Head Screw Key

997659619
BB 60903/30: RNCC: 3 | RNVC: 2

6 Mar 1995

5120-99-598-7166
Torque Wrench Adapter

995987166
MBEU57044: RNCC: 1 | RNVC: 2
SFN-1/2: RNCC: 3 | RNVC: 2
819029-0: RNCC: 5 | RNVC: 2
SFN 1/2 819029-0: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-797-8554
Socket Wrench Socket

997978554
MBEU57835: RNCC: 3 | RNVC: 2
B/MBEU57835: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-784-5555
Open Jaw Spanner

997845555
NO PRIMARY REF 99-784-5555: RNCC: 3 | RNVC: 2
80MM: RNCC: 5 | RNVC: 2
56-6/3-001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-775-1451
Socket Wrench Handle

997751451
MBEU74448: RNCC: 3 | RNVC: 2
B/MBEU74448: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-459-9102
Spanner Wrench

994599102
25Y261A: RNCC: 3 | RNVC: 2
26TD-95049: RNCC: 6 | RNVC: 9
26TD95049: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-708-6744
Torque Wrench Adapter

997086744
P5T1443224: RNCC: 3 | RNVC: 2
0625P-169: RNCC: 6 | RNVC: 9
062KT-151: RNCC: 6 | RNVC: 9

25 May 2006

5120-99-545-0251
Socket Wrench Socket

995450251
HBM50: RNCC: 3 | RNVC: 2
LSM250: RNCC: 3 | RNVC: 2
BS4006-TABLE 20 50MM: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-454-7641
Socket Wrench

994547641
UCW858-377: RNCC: 3 | RNVC: 2
720424: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-835-5831
Clutch Alignment To

5120-99-835-8291
Socket Wrenc Socket

5120-99-352-6770
Box Wrench

5120-99-223-6233

5120-99-429-5604
Socket Wrench Socket

994295604
NO PRIMARY REF 99-429-5604: RNCC: 3 | RNVC: 2
KEN-582-7080K: RNCC: 5 | RNVC: 2
KEN-582-7080K: RNCC: 6 | RNVC: 9

5 Sep 2011

5120-99-464-3612
Collective Act Tool

994643612
WG1588-0107-041: RNCC: 3 | RNVC: 2

23 Mar 2013

5120-99-208-1910
Splined Socket

992081910
RPH70586: RNCC: 3 | RNVC: 2
0621-76/5: RNCC: 6 | RNVC: 9
SR0057/5: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-8121
Torque Screwdriver

996668121
015200: RNCC: 3 | RNVC: 1
MINOR FH BLUE: RNCC: 5 | RNVC: 1

7 Feb 2007

5120-99-601-0909
Open End Wrench

996010909
6M4Y8069: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-662-1730
Driver Hexagon

996621730
TMA4-1-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-471-0801
Internal Wrench

994710801
1L427: RNCC: 3 | RNVC: 2
W10-4-1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-4419
Access Pin Inserter

997104419
NO PRIMARY REF 99-710-4419: RNCC: 3 | RNVC: 2
PE8831: RNCC: 5 | RNVC: 9

15 Nov 1973

5120-99-612-1413
Spanner

996121413
NO PRIMARY REF 99-612-1413: RNCC: 3 | RNVC: 2
121E93-731-00-0: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-958-0214
T Reaction Assembly

999580214
EA6305G664-043: RNCC: 3 | RNVC: 2

14 Mar 2004

5120-99-423-8243
Open End Wrench

994238243
TD449-11: RNCC: 3 | RNVC: 2
558172: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-722-5810
Sump Tool

997225810
3201-84088-20-2: RNCC: 3 | RNVC: 2
3201-84088-20: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-114-9201
Cocking Lever Assem

991149201
NO PRIMARY REF 99-114-9201: RNCC: 3 | RNVC: 2
AML12020: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-107-9730
Electronic Equipment Alignment Tool

991079730
R41-1376-01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-1997
Screwdriver Bit

991301997
1-440-2: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
1-440-2: RNCC: 5 | RNVC: 2
1-440-2: RNCC: 5 | RNVC: 2
DEFSTSN51-11PT26: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-6697
Torque Wrench Adapter

996596697
48419-A16/407: RNCC: 3 | RNVC: 2
48419A16-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-9047
Extract Drill Guide

991209047
6597: RNCC: 3 | RNVC: 2
7994-0113: RNCC: 5 | RNVC: 2
1C7106: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-782-6665
Face Spanner Wrench Socket

997826665
EFMC75052-002: RNCC: 3 | RNVC: 2

8 Feb 2003

5120-99-153-3653
Spanner Wrench

991533653
MBEU192468: RNCC: 3 | RNVC: 2
128GF-009: RNCC: 6 | RNVC: 9

19 Oct 2012

5120-99-432-4396
Screwdriver

994324396
NO PRIMARY REF 99-432-4396: RNCC: 3 | RNVC: 2
70-56978: RNCC: 5 | RNVC: 2
88870-363-168: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-928-3538
Windscreen Plunger

999283538
NO PRIMARY REF 99-928-3538: RNCC: 3 | RNVC: 2
MODOK 08: RNCC: 5 | RNVC: 2

6 Jun 2012

5120-99-780-1219
Hand Blind Riveter

997801219
7166-0005: RNCC: 3 | RNVC: 2
7166-0005: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-705-6569
Socket Wrench Socket

997056569
GD600151-001: RNCC: 3 | RNVC: 2

28 Apr 2005

5120-99-833-7371
Disengagement Tool

998337371
FV840863: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-832-4758
Actuator

998324758
ST1251: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-850-1203
Transfer Extractor

998501203
262772: RNCC: 3 | RNVC: 2
LV7RU262772: RNCC: 6 | RNVC: 9

8 Jul 1988

5120-99-451-5165
Cable Contact Tool

994515165
2714: RNCC: 3 | RNVC: 2
Z4ZD02483: RNCC: 6 | RNVC: 9

1 Mar 1977

5120-99-221-4996
Spanner Wrench

992214996
3201-85584-20-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-722-9159
Socket Wrench

997229159
15-560: RNCC: 3 | RNVC: 2
3296284R1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5813
Vise Jaw Caps

999105813
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H20888: RNCC: 5 | RNVC: 2
H5519: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-227-8324
Lifting Pneumatic Bag

992278324
ELM04: RNCC: 3 | RNVC: 2
EASYLIFT: RNCC: 5 | RNVC: 1
70-99-518: RNCC: 5 | RNVC: 2
SCL BAG: RNCC: 5 | RNVC: 2
ELMO5: RNCC: 5 | RNVC: 9
031YQ-012: RNCC: 6 | RNVC: 9
99-788-7219: RNCC: 6 | RNVC: 9

7 Jun 1991

5120-99-527-2281
Feeler Gauge

995272281
NO PRIMARY REF 99-527-2281: RNCC: 3 | RNVC: 2
B41702: RNCC: 5 | RNVC: 2
562762: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-630-8361
Cranked Hexagon Bit

996308361
NO PRIMARY REF 99-630-8361: RNCC: 3 | RNVC: 2
NTS15011: RNCC: 5 | RNVC: 2
MVEE39081A3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-406-6118
Hexagon Socket

994066118
NO PRIMARY REF 99-406-6118: RNCC: 3 | RNVC: 2
2448M76: RNCC: 5 | RNVC: 2
C576-70T269242: RNCC: 6 | RNVC: 9

28 May 2002

5120-99-662-1751
Insertion Tool

996621751
7551-06: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-785-1497
Desiccator Removal

997851497
T102-048276-19: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-2584
Combination Box And Open End Wrench

991362584
56978-0048: RNCC: 3 | RNVC: 2
56978-0048: RNCC: 5 | RNVC: 2
P11548: RNCC: 6 | RNVC: 9
070-363173: RNCC: 6 | RNVC: 9
363-136-2584: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-771-0426
Push Rod Clamp

997710426
100175-6965-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-778-6420
Screwdriver Bit

997786420
040119: RNCC: 3 | RNVC: 2
1C7786420: RNCC: 6 | RNVC: 9
99-514-9439: RNCC: 6 | RNVC: 9
401E: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-746-9729
Socket Wrench Handle Bar

997469729
SSN04/615/805/112: RNCC: 3 | RNVC: 2
615/805/112: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-490-4172
Removal Tool

994904172
A000285: RNCC: 3 | RNVC: 2
033ZX-001: RNCC: 6 | RNVC: 9

28 Oct 2003

5120-99-631-6219
Torque Wrench

996316219
T105-024118-510: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-133-7227
Spanner

991337227
FC26A: RNCC: 3 | RNVC: 2
0625P-156: RNCC: 6 | RNVC: 9
062KT-138: RNCC: 6 | RNVC: 9

25 May 2006

5120-99-437-5909
Box Spanner Set

994375909
NO PRIMARY REF 99-437-5909: RNCC: 3 | RNVC: 2
56: RNCC: 5 | RNVC: 1
0277-13296: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-3605
Rods And Nuts

994013605
NO PRIMARY REF 99-401-3605: RNCC: 3 | RNVC: 2
093211: RNCC: 5 | RNVC: 2
245C3: RNCC: 5 | RNVC: 2
932R: RNCC: 5 | RNVC: 2
16C6304: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-7990
Torque Wrench Adapter

994237990
9013-181: RNCC: 3 | RNVC: 2
555027: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-244-4827
Seal Removal Tool

992444827
02180: RNCC: 3 | RNVC: 2
2006/4: RNCC: 6 | RNVC: 9

14 Oct 1991

5120-99-616-7019
Socket Wrench Handle Bar

996167019
T.R.118/1: RNCC: 3 | RNVC: 2
B/T.R.118/1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5982
Socket Wrench

999105982
BS2558-TABLE 3 9/16X5/8A/F: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5220: RNCC: 6 | RNVC: 9
TABLE I(D) 9/16X5/8A/F: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6019
Open End Wrench

999106019
BS192-TABLE 2: RNCC: 4 | RNVC: 1
BS192-1-5/16A/FX1-1/2A/F SLIM SE: RNCC: 5 | RNVC: 2
H5255: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
15/16 A/F X 1-1/2 A/F SLIM SERI: RNCC: 6 | RNVC: 9
GROUP A FIG 1 TABLE 2: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-0946
Socket Wrench Socket

991360946
DEF STAN 51-11 PART 4: RNCC: 4 | RNVC: 1
BS4006-TABLE 20 55MM: RNCC: 4 | RNVC: 1
LDHM552: RNCC: 5 | RNVC: 2
LSM255: RNCC: 5 | RNVC: 2
TABLE I(B) 55MM: RNCC: 6 | RNVC: 9
LSM255 LOCK-ON: RNCC: 6 | RNVC: 9
LSM255 LOCK-ON: RNCC: 6 | RNVC: 9
LSM255 LOCK-ON: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6045
Open End Wrench

999106045
BS192-2-1/16A/F: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
H5261: RNCC: 6 | RNVC: 9
TABLE I(A) 2-1/16A/F: RNCC: 6 | RNVC: 9
FA17129: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5994
Socket Wrench

999105994
BS2558: RNCC: 4 | RNVC: 1
F1FA17015: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4184: RNCC: 6 | RNVC: 9
TABLE I(E) 3/8BS: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-805-6677
Ratchet Wrench

998056677
LEYTOOL NO.4: RNCC: 3 | RNVC: 1
S1222: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-549-9254
Plug Insert Tool

995499254
T17389: RNCC: 3 | RNVC: 2

3 Feb 2005

5120-99-613-2424
Socket Wrench Extension

996132424
NK209A: RNCC: 3 | RNVC: 2

18 May 2006

5120-99-611-7555
Retainer Ring Assem

996117555
PA1113-0153: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-450-8519

5120-99-213-0148
Combination Lock Reset Key

992130148
7L64/050/01/W: RNCC: 3 | RNVC: 2

20 May 2004

5120-99-136-5839
Shaft Nut Spanner

991365839
NO PRIMARY REF 99-136-5839: RNCC: 3 | RNVC: 2
924H012-20: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-465-4154
Retaining Ring Pliers

994654154
HD1: RNCC: 3 | RNVC: 2
JO1: RNCC: 5 | RNVC: 2
10615-J11: RNCC: 6 | RNVC: 9
1B5797: RNCC: 6 | RNVC: 9

9 Nov 1989

5120-99-820-1623
Mai Special Spanner

998201623
NO PRIMARY REF 99-820-1623: RNCC: 3 | RNVC: 2
49X3279: RNCC: 5 | RNVC: 2
LV8RERB49X3279: RNCC: 6 | RNVC: 9

3 Aug 1983

5120-99-548-4005
Tommy Bar

995484005
50145-1001: RNCC: 3 | RNVC: 2
BZ3046: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-667-6401
Screwdriver

996676401
347/22128: RNCC: 3 | RNVC: 2
TGG PCS 26011: RNCC: 6 | RNVC: 9

4 Jun 2010

5120-99-743-8145
Adjustable Wrench

997438145
825/10019: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-120-8334
Open End Wrench

991208334
NO PRIMARY REF 99-120-8334: RNCC: 3 | RNVC: 2
28-902-0428: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5807
Vise Jaw Caps

999105807
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H471: RNCC: 5 | RNVC: 2
FG3: RNCC: 5 | RNVC: 2
602-268: RNCC: 5 | RNVC: 2
1B9105807: RNCC: 6 | RNVC: 9
FA11421: RNCC: 6 | RNVC: 9
99-280-2479: RNCC: 6 | RNVC: 9
PYTHON 3 INCH: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-558-7020
Spanner Wrench

995587020
8703820-80: RNCC: 3 | RNVC: 2
8703820: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-869-3593
Socket Head Scr Key

998693593
5190-06-KEY 2.50MM: RNCC: 3 | RNVC: 2

11 Aug 1995

5120-99-910-6574
Trowel

999106574
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2918: RNCC: 6 | RNVC: 9
H2918: RNCC: 6 | RNVC: 9
1K224: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-0760
Electrical Contact Remover

991240760
294-189: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-432-5142
Spanner Wrench

994325142
DWS437-8: RNCC: 3 | RNVC: 2
88621-613-922: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-617-1905
Mechanical Puller

996171905
HU18187-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-790-4115
Handle And Cam Asse

997904115
PTF420345SDDET.NO.7 AND 8: RNCC: 3 | RNVC: 2
PTF420345SDDET7-8: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-792-7339
Socket Wrench Handle Ratchet Head

997927339
DD5711/8: RNCC: 3 | RNVC: 2

23 Nov 2006

5120-99-647-1808
Spanner Wrench

996471808
9245: RNCC: 3 | RNVC: 2
27Y11165: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-657-2471
Bearing And Bushing Driver

996572471
460009437C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-944-6172

5120-99-946-9400

5120-99-962-1311

5120-99-962-2624
Drive Pin Punch

5120-99-955-0646

5120-99-083-6477
Jack Yoke

990836477
76-00004-000: RNCC: 3 | RNVC: 2

17 Nov 1989

5120-99-562-6229
Precompression Wedg

995626229
S1007639: RNCC: 3 | RNVC: 2
730/08/13-22: RNCC: 6 | RNVC: 9

11 Oct 2005

5120-99-655-3788
Mechanical Puller

996553788
CHA754-160/405: RNCC: 3 | RNVC: 2
CHA754-160-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-6259
Open End Wrench

999106259
BS2583: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H5507: RNCC: 6 | RNVC: 9
H5507: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-9852
Face Spanner Wrench Socket

991379852
4039-10: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-150-6635

5120-99-907-1698
Cylinder Link Clamp

999071698
YN74911A: RNCC: 3 | RNVC: 2

12 Oct 2010

5120-99-541-9438
Fitment Seal Tool

995419438
9002-1391: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-722-2842
Solid Center Punch

997222842
PM3355-405: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-910-6278
Socket Wrench

999106278
BS2558-TABLE 6 16X17MM: RNCC: 3 | RNVC: 1
H4345: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 3: RNCC: 4 | RNVC: 1
A8269: RNCC: 5 | RNVC: 2
TABLE I(B) 16X17MM: RNCC: 6 | RNVC: 9
BS2558: RNCC: 6 | RNVC: 9
FA17305: RNCC: 6 | RNVC: 9
7S2416: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-8956
Socket Wrench H Bar

994118956
NO PRIMARY REF 99-411-8956: RNCC: 3 | RNVC: 2
ST111-31: RNCC: 5 | RNVC: 9
27Q11093: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-614-8936
Drive Pin Punch

996148936
HST121-0109: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-4291
Blacksmith's Anvil

999104291
DEF1166: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-260-8235
Socket Wrench Set

992608235
SJ.430D: RNCC: 3 | RNVC: 2

29 Sep 1999

5120-99-799-5935
Spanner Wrench

997995935
200886001-AFT-2: RNCC: 3 | RNVC: 2
200886001-AFT-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-556-6551
Socket Wrench

995566551
A3442PT4: RNCC: 3 | RNVC: 2
A3442-4: RNCC: 5 | RNVC: 2
190-223607: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-194-6663
Open End Wrench

991946663
2J5668: RNCC: 3 | RNVC: 2
6J5668: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 1: RNCC: 4 | RNVC: 1
BS192-TABLE 2 9/16X11/16A/F: RNCC: 4 | RNVC: 1
024002: RNCC: 5 | RNVC: 2
2J5668: RNCC: 5 | RNVC: 2
TABLE I(E) 9/16X11/16A/F: RNCC: 6 | RNVC: 9
360-246081: RNCC: 6 | RNVC: 9
TABLE 2. 9/16 A/F X 11/16 A/F: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6238
Open End Wrench

999106238
BS192-TABLE 3 5/8X11/16BS: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-742-7637
Socket Wrench Handle Bar

997427637
880511/054: RNCC: 3 | RNVC: 2
B880511/054: RNCC: 5 | RNVC: 2
X26-B117: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-863-6192
Torque Wrench

998636192
NO PRIMARY REF 99-863-6192: RNCC: 3 | RNVC: 2
575-649: RNCC: 5 | RNVC: 2
575-649: RNCC: 5 | RNVC: 9

19 Jul 2005

5120-99-146-2874
Seal Pusher

991462874
S6170-10098-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-829-9412
Pinion Oil Remover

998299412
15-048: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-467-8078
Retaining Ring Pliers

994678078
NO PRIMARY REF 99-467-8078: RNCC: 3 | RNVC: 2
J0: RNCC: 5 | RNVC: 2
1B5796: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-663-9259
Spanner Wrench

996639259
PA1113-1130: RNCC: 3 | RNVC: 2
XP98PB01348: RNCC: 6 | RNVC: 9

17 Feb 1998

5120-99-910-6557
Blacksmiths' Tongs

999106557
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2787: RNCC: 6 | RNVC: 9
H2787: RNCC: 6 | RNVC: 9
1C2444: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-738-9095
Drive Pin Punch

997389095
WW471666/AR: RNCC: 3 | RNVC: 2
118 995 174: RNCC: 5 | RNVC: 2

19 Mar 1990

5120-99-792-8375
C Clamp

997928375
17602-150: RNCC: 3 | RNVC: 2
062ET-009: RNCC: 6 | RNVC: 9

1 Jun 2006

5120-99-716-9078
Leg

997169078
152929: RNCC: 3 | RNVC: 2
1098: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-5531
Spanner Wrench

991365531
T444: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-192-2555
Plate

991922555
800860T1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-100-7453

5120-99-101-0791

5120-99-255-2224
Dimpling Tool Head

992552224
H-4-120: RNCC: 3 | RNVC: 2
CU-4-120 ITEM 2: RNCC: 5 | RNVC: 2
1C-8777: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4811
Wood Caulking Iron

999104811
C00RDPATH1450: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H1450: RNCC: 6 | RNVC: 9
H1450: RNCC: 6 | RNVC: 9
9104811: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-216-2437
Clamping Block

992162437
SGE3240-2303: RNCC: 3 | RNVC: 2

3 Apr 2013

5120-99-842-9213
Exha Insertion Tool

998429213
NO PRIMARY REF 99-842-9213: RNCC: 3 | RNVC: 2
GA263: RNCC: 5 | RNVC: 2
LV7RRGA263: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-302-1191
Torque Wrench

993021191
RSE200T: RNCC: 3 | RNVC: 2
469-7349: RNCC: 5 | RNVC: 2
RS469-7349: RNCC: 5 | RNVC: 2

12 Jul 2007

5120-99-876-0467
Install Tool

998760467
NO PRIMARY REF 99-876-0467: RNCC: 3 | RNVC: 2
727793TA: RNCC: 5 | RNVC: 2
126TS-914: RNCC: 6 | RNVC: 9

6 Sep 2002

5120-99-120-9778
Socket Spanner Tip

991209778
H6365: RNCC: 2 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 5 | RNVC: 1
CSB312: RNCC: 5 | RNVC: 2
1L408: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-595-6539
Socket Head Scr Key

5120-99-439-4468
Blacksmith's Bottom Swage

994394468
NO PRIMARY REF 99-439-4468: RNCC: 3 | RNVC: 2
F1FA17918: RNCC: 5 | RNVC: 2
2680: RNCC: 5 | RNVC: 2
2203: RNCC: 6 | RNVC: 9
2203A BOTTOM: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-657-3173
Torque Wrench Adapter

996573173
P-890440-403: RNCC: 3 | RNVC: 2
P890440-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-465-0987

5120-99-401-3194

5120-99-910-5959
Adjustable Wrench

999105959
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
R-18: RNCC: 5 | RNVC: 2
DL9A: RNCC: 6 | RNVC: 9
874 787 M1: RNCC: 6 | RNVC: 9
1C5588: RNCC: 6 | RNVC: 9
H2423: RNCC: 6 | RNVC: 9
H2423: RNCC: 6 | RNVC: 9
874787M1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-924-5813
Socket Head Screw Key

999245813
W7L: RNCC: 3 | RNVC: 2
BS2470: RNCC: 4 | RNVC: 1
85-25-19-10-1721: RNCC: 5 | RNVC: 2
121-375: RNCC: 6 | RNVC: 9
851724: RNCC: 6 | RNVC: 9
1B5562: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-846-6368
Free-Whee Extractor

998466368
EA6305G604-043: RNCC: 3 | RNVC: 2

18 Aug 2010

5120-99-910-6595
Engineers Vic Stand

999106595
NO PRIMARY REF 99-910-6595: RNCC: 3 | RNVC: 2
H2958: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-852-5895
Hand Screw Jack

998525895
S-82-8143-01: RNCC: 3 | RNVC: 2
S-82-8143-01-IL: RNCC: 5 | RNVC: 2

6 Apr 2006

5120-99-910-6240
Open End Wrench

999106240
BS192-TABLE 3 1X1-1/8BS: RNCC: 4 | RNVC: 1
C9510: RNCC: 5 | RNVC: 2
H21217: RNCC: 5 | RNVC: 2
C00RDPATH5303: RNCC: 6 | RNVC: 9
190-992411: RNCC: 6 | RNVC: 9
BS192: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-558-0572
Spanner Wrench

995580572
B4695: RNCC: 3 | RNVC: 2
B4695SKF: RNCC: 5 | RNVC: 2
H606-326480: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-791-6783
Spanner Wrench

997916783
SSN.07/W/581/00/305/6: RNCC: 3 | RNVC: 2
W/581/00/305/6: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-205-1914

5120-99-204-8655

5120-99-208-9708

5120-99-422-5667
Socket Wrench Handle Bar

994225667
N0D2175-6-3: RNCC: 3 | RNVC: 2
121124: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-829-5539

5120-99-744-1419
Actuator Co Adaptor

5120-99-820-9905

5120-99-806-7473

5120-99-826-6752
Tool Track F1tt1ng

5120-99-747-6169
Open End Wrench

5120-99-391-3487
Mounting Tool

993913487
2 0132-321: RNCC: 3 | RNVC: 2

24 Sep 2013

5120-99-139-0228
Seal Inserter

991390228
EA6305G551-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-910-4420
Parallel Drift

999104420
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H594: RNCC: 6 | RNVC: 9
H594: RNCC: 6 | RNVC: 9
FA11650: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6265
Open End Wrench

999106265
BS192-1-1/4BS: RNCC: 3 | RNVC: 1
C00RDPATH5312: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 1: RNCC: 4 | RNVC: 1
TABLE I(B) 1-1/4BS: RNCC: 6 | RNVC: 9
1954: RNCC: 6 | RNVC: 9
BS192: RNCC: 6 | RNVC: 9
TABLE 3: RNCC: 6 | RNVC: 9
F1FA17245: RNCC: 6 | RNVC: 9
OSW218: RNCC: 6 | RNVC: 9
1C3226: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-763-0403
Face Spanner Wrench Socket

997630403
A-891337-403: RNCC: 3 | RNVC: 2
A891337-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-981-0456
Socket Wrench Screwdriver Attachment

999810456
KEN-582-6241K: RNCC: 3 | RNVC: 2
CV159098: RNCC: 5 | RNVC: 2

31 Jan 2012

5120-99-732-7775
Removal Tool

997327775
50106/N: RNCC: 3 | RNVC: 2
A3/50106/N: RNCC: 5 | RNVC: 2
50102/GA: RNCC: 6 | RNVC: 9
A3/50102/GA: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-870-2117
Torque Wrench

998702117
NO PRIMARY REF 99-870-2117: RNCC: 3 | RNVC: 2
1.9454-400: RNCC: 5 | RNVC: 2
1.9454-400: RNCC: 5 | RNVC: 9

20 May 2011

5120-99-910-6498
Blacksmith's Bottom Swage

999106498
S32: RNCC: 3 | RNVC: 2
DL-9-A-H2668: RNCC: 6 | RNVC: 9
FA17930: RNCC: 6 | RNVC: 9
1C3249: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-1015
Electrical Contact Remover

991241015
M15514-16: RNCC: 3 | RNVC: 2
1H427: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-407-1012
Socket Wrench Extension

994071012
NMT-154: RNCC: 3 | RNVC: 2

1 Dec 1998

5120-99-402-0626

5120-99-724-0248

5120-99-402-0643

5120-99-835-4642
Extractor

998354642
P5J 1448763: RNCC: 3 | RNVC: 2
062KT-119: RNCC: 6 | RNVC: 9
0625P-132: RNCC: 6 | RNVC: 9

25 May 2006

5120-99-961-9833
Spanner Wrench

5120-99-797-6764
Insertion Tool

997976764
CHA 748-2057: RNCC: 3 | RNVC: 2
CHA748-2057: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-476-5466
Pin Assembly

994765466
EA6205G026-043: RNCC: 3 | RNVC: 2

9 Jan 2002

5120-99-768-7473
Socket Wrench

5120-99-779-2009

5120-99-401-3037

5120-99-771-2970
Flang Assembly Tool

5120-99-401-2599

5120-99-605-4140
Spanner

5120-99-469-2656
Spanne Disc Bushing

5120-99-401-3044

5120-99-910-4334
Wrecking Bar

999104334
UKSC4576: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 28: RNCC: 5 | RNVC: 1
A3-9795: RNCC: 5 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
H146: RNCC: 6 | RNVC: 9
210423: RNCC: 6 | RNVC: 9
BW210423: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6625
Timber Wedge

999106625
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
07224708: RNCC: 5 | RNVC: 2
H3001: RNCC: 5 | RNVC: 9
65G40001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-765-6627

5120-99-469-3028

5120-99-782-6807
Box Wrench

997826807
RK.10818: RNCC: 3 | RNVC: 2
85-101-2643: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-978-1219
Socket Wrench Socket

999781219
BS4006-TABLE 20 27MM: RNCC: 3 | RNVC: 1
HBM27: RNCC: 3 | RNVC: 2
LSM227: RNCC: 3 | RNVC: 2
962303: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-973-1285
Socket Wrench

999731285
709538: RNCC: 3 | RNVC: 2
001292307/040: RNCC: 5 | RNVC: 1
001292307/040 ITEM 11: RNCC: 5 | RNVC: 2
001292307/040/11: RNCC: 5 | RNVC: 2
708285 ITEM 11: RNCC: 5 | RNVC: 2
708285/11: RNCC: 5 | RNVC: 2

13 Feb 1992

5120-99-302-1853
Face Spanner Wrench Socket

993021853
7297-115: RNCC: 3 | RNVC: 2

18 May 2012

5120-99-884-6383
Drill Guide

998846383
182/01466: RNCC: 3 | RNVC: 2
SM765A: RNCC: 6 | RNVC: 9

4 Dec 1996

5120-99-723-4554
Seal Inserter

5120-99-104-8728

5120-99-251-6287
Spanner Wrench

992516287
4973A: RNCC: 3 | RNVC: 2
4973A-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-2081
Holding Block

994222081
NO PRIMARY REF 99-422-2081: RNCC: 3 | RNVC: 2
MT1026-39: RNCC: 5 | RNVC: 9
27Q32938: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-460-9829
Spanner Wrench

994609829
N0DM3184-6: RNCC: 3 | RNVC: 2
162180: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-539-0483
W Adjusting Spanner

995390483
ID1916-3: RNCC: 3 | RNVC: 2

13 Jun 1978

5120-99-174-5609
Sp Mounting Device

991745609
17229222-0: RNCC: 3 | RNVC: 2
17229222-0: RNCC: 5 | RNVC: 2
021JB-025: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-609-0767
Hexagon Screwdriver

996090767
DIB 097-0: RNCC: 3 | RNVC: 2
DIB 097-0: RNCC: 5 | RNVC: 2
13-517: RNCC: 6 | RNVC: 9

20 Jul 1999

5120-99-209-7840
Pump

992097840
NO PRIMARY REF 99-209-7840: RNCC: 3 | RNVC: 2
99900013: RNCC: 5 | RNVC: 2
K785.00: RNCC: 5 | RNVC: 2
K786-900: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-539-4650
Box Wrench

995394650
X99-7212: RNCC: 3 | RNVC: 2
99-7212: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-624-1512

5120-99-910-4804
Wood Caulking Iron

999104804
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H1439: RNCC: 6 | RNVC: 9
FA14690: RNCC: 6 | RNVC: 9
9104804: RNCC: 6 | RNVC: 9
1B3567: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H1439: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-818-6770
Flange

998186770
EA6205G603-045: RNCC: 3 | RNVC: 2
102MD-003: RNCC: 6 | RNVC: 9

23 Apr 2010

5120-99-995-2030
Inserter And Remove

999952030
EA6305G624-069: RNCC: 3 | RNVC: 2

15 Jan 2005

5120-99-772-1428
Spanner

997721428
SC/4956576/MAN/MM1: RNCC: 3 | RNVC: 2
992JV-48: RNCC: 6 | RNVC: 9

20 Dec 1999

5120-99-845-2038
Torque Wrench Adapter

998452038
PP/T1008LB: RNCC: 3 | RNVC: 2
0625P-092: RNCC: 6 | RNVC: 9
062KT-084: RNCC: 6 | RNVC: 9

23 May 2006

5120-99-713-7700

5120-99-717-2138

5120-99-714-9755

5120-99-717-1859
Spanner Wrench

5120-99-826-6294
Spanner Ring Specia

998266294
FV1051661: RNCC: 3 | RNVC: 2
112519ST: RNCC: 5 | RNVC: 2

24 Jan 1983

5120-99-383-3674
Oil Seal Re Adaptor

993833674
LC550-23: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-773-7140
Flat Tip Screwdriver

997737140
SDT-21/RRA: RNCC: 3 | RNVC: 2
SDT-21: RNCC: 5 | RNVC: 1
SDT-21: RNCC: 5 | RNVC: 1

30 Mar 2000

5120-99-580-1647
Electronic Equipment Alignment Tool

995801647
DT2047: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-663-4831
Spanner Wrench

996634831
LT-16555: RNCC: 3 | RNVC: 2
V/61/A6531/25/122/1076/2/030: RNCC: 5 | RNVC: 2

13 Jan 2001

5120-99-910-6637
Pipe Wrench

999106637
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H3023: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H3023: RNCC: 6 | RNVC: 9
FA19588: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-789-9760
Box Wrench

997899760
02/Y/40/2367: RNCC: 3 | RNVC: 2
FP60: RNCC: 6 | RNVC: 9
0849A-003: RNCC: 6 | RNVC: 9

23 Sep 2008

5120-99-659-2917
Socket Wrench Socket

996592917
P-891130-407: RNCC: 3 | RNVC: 2
P891130-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-139-2324

5120-99-136-2614

5120-99-655-3766
Mechanical Puller

996553766
CHA755-053-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-445-1336
Special Spanner

994451336
NO PRIMARY REF 99-445-1336: RNCC: 3 | RNVC: 2
22231: RNCC: 5 | RNVC: 2
W3WCBLD22231: RNCC: 6 | RNVC: 9

31 Aug 1989

5120-99-124-4256
Hand Blind Riveter

991244256
7160-0005: RNCC: 3 | RNVC: 2
7160: RNCC: 5 | RNVC: 1
JB: RNCC: 5 | RNVC: 1
7160-0005: RNCC: 5 | RNVC: 2
7160-0005: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-836-0533
Socket Wrench

998360533
369-111: RNCC: 3 | RNVC: 2
LV7FW369-111: RNCC: 6 | RNVC: 9
16C3369: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-535-9037
Socket Wrench Set

995359037
NO PRIMARY REF 99-535-9037: RNCC: 3 | RNVC: 2
059-02-039: RNCC: 5 | RNVC: 2
SEN582-0200K: RNCC: 5 | RNVC: 2

1 May 2001

5120-99-666-2220
Thread Rod Assembly

996662220
EB6505G507-043: RNCC: 3 | RNVC: 2
1MEVGUG: RNCC: 6 | RNVC: 9

28 Jul 2004

5120-99-201-4053

5120-99-733-6548

5120-99-424-0847
Spanner Wrench

994240847
A193839: RNCC: 3 | RNVC: 2
A193839: RNCC: 5 | RNVC: 9
26FX95152: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-001-1965
Torque Wrench Adapter

990011965
JA6289: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-610-7805
Mechanical Puller

5120-99-798-1526
Hand Blind Riveter

997981526
7165-0014: RNCC: 3 | RNVC: 2
7165-0014: RNCC: 5 | RNVC: 2
7165-0014: RNCC: 5 | RNVC: 2
F300 0T 005 9450: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-781-4608
Socket Wrench Socket

997814608
H37145A14: RNCC: 3 | RNVC: 2
37145A14: RNCC: 5 | RNVC: 2
85-690-2932: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-2002
Socket Spanner

998102002
NO PRIMARY REF 99-810-2002: RNCC: 3 | RNVC: 2
LV1BRCMH393: RNCC: 5 | RNVC: 2

14 Dec 1979

5120-99-779-0985
Ha Swaging Tool Die

997790985
16-0230: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-503-3587
Thre Anchor-Adaptor

995033587
A0/1200/M5: RNCC: 3 | RNVC: 2
NPPOGAMA4B2060405: RNCC: 6 | RNVC: 9

4 Jul 2005

5120-99-127-9369
Torque Wrench

991279369
DEFSTAN51-11 PART 32: RNCC: 4 | RNVC: 1
SL2: RNCC: 5 | RNVC: 2
TRL200: RNCC: 5 | RNVC: 2
04-6964-4: RNCC: 5 | RNVC: 2
SL2: RNCC: 5 | RNVC: 2
H6415: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-467-0686
Anvil

994670686
NO PRIMARY REF 99-467-0686: RNCC: 3 | RNVC: 2
J57B5ANVIL10UNF: RNCC: 5 | RNVC: 9
1C8012: RNCC: 6 | RNVC: 9

23 Nov 1988

5120-99-458-1918
Aerial Reeving Tool

994581918
NO PRIMARY REF 99-458-1918: RNCC: 3 | RNVC: 2
AS210452: RNCC: 5 | RNVC: 2
861826: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-958-0798
Extractor

999580798
NO PRIMARY REF 99-958-0798: RNCC: 3 | RNVC: 2
CSDE/TOR/GSS/41: RNCC: 5 | RNVC: 2
4MA4119000: RNCC: 6 | RNVC: 9

2 Aug 2005

5120-99-316-3908
Seal Inserter

993163908
3824499: RNCC: 3 | RNVC: 2
FH9802E0006: RNCC: 6 | RNVC: 9

18 Mar 1998

5120-99-693-1283
Hand Hydraulic Jack Kit

996931283
OE-4-21-27: RNCC: 3 | RNVC: 2
113JL-001: RNCC: 6 | RNVC: 9

13 Jun 2011

5120-99-173-0398
Multipole Operating

5120-99-428-7624

5120-99-591-2925
Insertion Tool Asse

5120-99-542-0467
Extractor Assembly

5120-99-541-9461
Restra1n1ng Spanner

5120-99-541-9464
Open Jaw An Spanner

5120-99-199-9765
Vise Grip Pliers

991999765
NO PRIMARY REF 99-199-9765: RNCC: 3 | RNVC: 2
VP11R: RNCC: 5 | RNVC: 2
C569-70T269866: RNCC: 6 | RNVC: 9

24 May 2002

5120-99-419-0823

5120-99-742-9417
Torque Wrench

997429417
QUICKSET5-50F/HEX: RNCC: 3 | RNVC: 2
016600: RNCC: 5 | RNVC: 2
QS 5-50FH: RNCC: 5 | RNVC: 2
QUICKSET 5-50 FH: RNCC: 5 | RNVC: 2
H23709: RNCC: 5 | RNVC: 2
TA189: RNCC: 5 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-641-0508
Hand Screw Jack Extension

996410508
WG1388-0271-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-477-5283
Telescoping Pole

994775283
TO1601: RNCC: 3 | RNVC: 2
08321-001: RNCC: 6 | RNVC: 9

8 Jul 2008

5120-99-532-1328
Socket Head Screw Key

995321328
46A409: RNCC: 3 | RNVC: 2
008118520-01: RNCC: 5 | RNVC: 2
008118520SH01: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-1261
Torque Wrench

991201261
DEFSTAN51-11 PART 32: RNCC: 4 | RNVC: 1
H20267: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
0276-120-1261: RNCC: 6 | RNVC: 9
H5753: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-826-0719
Hydraulic Ra Piston

998260719
NO PRIMARY REF 99-826-0719: RNCC: 3 | RNVC: 2
SK94925: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-538-2704
Stuffing Box And Pump Packing Extractor

995382704
X50254REFERENCE25: RNCC: 3 | RNVC: 2
X50254: RNCC: 5 | RNVC: 1
X50254-25: RNCC: 5 | RNVC: 2
Z1398B: RNCC: 5 | RNVC: 2
0275-12191: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-416-3032
Bearing And Bushing Inserter

994163032
EA1-88-389: RNCC: 3 | RNVC: 2
26FZ-95050: RNCC: 6 | RNVC: 9
55050: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-630-9422
Crimping Tool

996309422
NO PRIMARY REF 99-630-9422: RNCC: 3 | RNVC: 2
NTS15042: RNCC: 5 | RNVC: 2
MVEE39090A3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-169-0679
Spanner Wrench

991690679
452-65228-000: RNCC: 3 | RNVC: 2
FV2206160: RNCC: 5 | RNVC: 2
DS/N/1041: RNCC: 7 | RNVC: 1

19 Aug 1997

5120-99-209-4428

5120-99-214-3261
Abrasive Wh Dresser

5120-99-420-4115

5120-99-423-8249
Open End Wrench

994238249
9031-23: RNCC: 3 | RNVC: 2
558925: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-562-6468
Spanner Wrench

995626468
B00010-01031: RNCC: 3 | RNVC: 2
HP44-12-P470 ITEM 25: RNCC: 5 | RNVC: 2
HP44-12-P470/25: RNCC: 5 | RNVC: 2

30 Nov 2006

5120-99-824-5602
Hub Puller

998245602
273MS: RNCC: 3 | RNVC: 2
12730606: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-782-1138
Spanner Wrench

997821138
H21877: RNCC: 1 | RNVC: 2
AVA127A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-786-6784
Separator

997866784
A201: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-459-0696
Socket Wrench Handle

994590696
AK657: RNCC: 3 | RNVC: 2
64VV2799: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-643-6715
Electronic Equipment Alignment Tool

996436715
TT2: RNCC: 3 | RNVC: 2
74-002-94: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-607-5529
Alignment Dowel

996075529
NO PRIMARY REF 99-607-5529: RNCC: 3 | RNVC: 2
PE27223: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-224-8373
Gas Cylinde Spanner

992248373
353951: RNCC: 3 | RNVC: 2
6150: RNCC: 5 | RNVC: 2
16-501: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-717-1183

5120-99-801-3353

5120-99-801-3208

5120-99-735-7272
Spatula

5120-99-661-5879
Flat Ti Screwdriver

5120-99-818-7608

5120-99-926-3599
Open End Wrench

999263599
2JM89: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-99-348-9756
Torque Wrench

993489756
AITG-0021-A4: RNCC: 3 | RNVC: 2
AITG-0021-A4: RNCC: 5 | RNVC: 2

4 Jul 1994

5120-99-139-7782
Socket Head Screw Key

991397782
100161-0000-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-052-5071
T-Key

990525071
W715440: RNCC: 3 | RNVC: 2
AI15-1678-A4: RNCC: 5 | RNVC: 2

28 May 1997

5120-99-646-2814

5120-99-142-0368
Servo Dowel Drift

991420368
NO PRIMARY REF 99-142-0368: RNCC: 3 | RNVC: 2
AT511: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-252-0070
Hydrau Tool Turning

992520070
FV2060584: RNCC: 3 | RNVC: 2

10 Jul 1989

5120-99-577-3418
Pawl Pin

5120-99-668-8198
Face Spanner Wrench Socket

996688198
3201-29386-LP-X-01: RNCC: 3 | RNVC: 2
SAP 25834763: RNCC: 5 | RNVC: 2
HT2804 REF D1 0147: RNCC: 5 | RNVC: 2

4 Apr 2013

5120-99-606-9351
Loc Crimping Pliers

5120-99-234-2333
Seal Installer

992342333
453 7408-104: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-826-5245
Tool Fitting Oil Se

998265245
FV725904: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-718-7863
Socket Wrench Crowfoot Attachment

997187863
KU.37312: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-429-1836
Split Sleeve

994291836
03056TA01: RNCC: 3 | RNVC: 2

10 Feb 1995

5120-99-447-3070
Mechanical Puller Forcing Screw

994473070
AMP 00 06 50002: RNCC: 3 | RNVC: 2
60202682: RNCC: 5 | RNVC: 2

10 Aug 2009

5120-99-259-6272
Torque Wrench Adapter

992596272
MBEU171748: RNCC: 3 | RNVC: 2

10 Dec 2003

5120-99-052-3823
Adjuster Tool

5120-99-751-8942
Drive Bit

997518942
TX50: RNCC: 3 | RNVC: 2
480-TX-50: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-521-3776
Hand Blind Riveter

995213776
2720: RNCC: 3 | RNVC: 2
REF37-01-05SHT1OF1 ITEM NO 5: RNCC: 6 | RNVC: 9

27 Apr 2001

5120-99-252-8379
Socket Wrench Handle

992528379
TM739: RNCC: 3 | RNVC: 2
1L/792: RNCC: 6 | RNVC: 9
TM739 LOCK-ON: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-513-5163
Open End Box Wrench

995135163
4352: RNCC: 3 | RNVC: 2

27 Sep 1991

5120-99-721-9310
Spacer

997219310
460009260-4: RNCC: 3 | RNVC: 2
460009260DETAIL4: RNCC: 6 | RNVC: 9

2 Sep 1989

5120-99-252-6138
Socket Head Screw Key

992526138
JRB1085: RNCC: 3 | RNVC: 2
BS4168 PART 9: RNCC: 5 | RNVC: 1
24-6462-4: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-824-3107
Extractor Leg Set

998243107
854C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-826-8077
Fi Open Jaw Spanner

998268077
305484: RNCC: 3 | RNVC: 2
305484: RNCC: 5 | RNVC: 2

16 Jun 1987

5120-99-846-1716
Socket Wrench Socket

998461716
75420: RNCC: 3 | RNVC: 2
75420: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-957-9918
Recoil S Guide Tool

999579918
02-2022: RNCC: 3 | RNVC: 2

12 May 2004

5120-99-299-8470
Rollpin Punch

992998470
246.8: RNCC: 3 | RNVC: 2
246-8: RNCC: 5 | RNVC: 2
1B-6176: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-443-0034
Seal Inserter

994430034
NO PRIMARY REF 99-443-0034: RNCC: 3 | RNVC: 2
YB-6195: RNCC: 5 | RNVC: 2

9 Apr 1999

5120-99-548-0845
Torque Wrench Adapter

995480845
UX10515A: RNCC: 3 | RNVC: 2
734-352048: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-2093

5120-99-422-2065

5120-99-517-1572
Mechanical Puller

995171572
S3S18303000: RNCC: 3 | RNVC: 2

4 Aug 1992

5120-99-701-3929
Mechanical Puller

997013929
S3S18282000: RNCC: 3 | RNVC: 2

4 Aug 1992

5120-99-461-8466
Tool

994618466
AM20616: RNCC: 3 | RNVC: 2
27G5697: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-463-2216
Dessicator Key

5120-99-944-3088

5120-99-967-7490

5120-99-924-2661

5120-99-412-3750
Open End Wrench

994123750
31969: RNCC: 3 | RNVC: 2
AU272-152: RNCC: 5 | RNVC: 2
4K3216: RNCC: 6 | RNVC: 9
53B3842: RNCC: 6 | RNVC: 9
53B4817: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-721-0450
S Installation Tool

997210450
T39: RNCC: 3 | RNVC: 2
T39: RNCC: 5 | RNVC: 2

1 Oct 1988

5120-99-910-6048
Open End Wrench

999106048
BS192-TABLE 2: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5264: RNCC: 6 | RNVC: 9
TABLE I(A) 2-3/8A/F: RNCC: 6 | RNVC: 9
FA17132: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5643
Grommet Inserting Punch And Die

999105643
C00RDPATH2010: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2010: RNCC: 6 | RNVC: 9
H2010: RNCC: 6 | RNVC: 9
F1FA15953: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5843
Double- Screwdriver

999105843
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H2255: RNCC: 6 | RNVC: 9
H2255: RNCC: 6 | RNVC: 9
FA16767: RNCC: 6 | RNVC: 9
1(A)ITEM7: RNCC: 6 | RNVC: 9
DEF-1192: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
1C3592: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-519-2241
Piston Yoke Tool

995192241
EFMC75118-002: RNCC: 3 | RNVC: 2

8 Feb 2003

5120-99-717-1105
Assembly Pliers

997171105
T441210: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-612-9988
Socket Wrench Crowfoot Attachment

996129988
SK5780: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-468-5385
Spanner Wrench

994685385
AE0406: RNCC: 3 | RNVC: 2
27M12285: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-377-5323
Spanner Wrench

993775323
110079-15659: RNCC: 3 | RNVC: 2
26VC-96029: RNCC: 6 | RNVC: 9

27 Feb 2002

5120-99-428-0872

5120-99-660-3057
Nozzle Wrench

996603057
0199327: RNCC: 3 | RNVC: 2
002MF-001: RNCC: 6 | RNVC: 9

9 Mar 2000

5120-99-124-0701
Co Inserter Mandrel

991240701
NO PRIMARY REF 99-124-0701: RNCC: 3 | RNVC: 2
HCV4359: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-837-0075
Mechanical Puller Attachment

998370075
EA6205G573-107: RNCC: 3 | RNVC: 2

17 Mar 2009

5120-99-075-7088
Seal Installer

990757088
453 7785-073: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-246-1786
Hand Tool

992461786
STD419C/51Y: RNCC: 3 | RNVC: 2
26DL-95959: RNCC: 6 | RNVC: 9

20 Jun 2002

5120-99-659-6419
Mechanical Puller

996596419
48757-A2/403: RNCC: 3 | RNVC: 2
48757A2-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-871-6580
Drawbar Alignm Tool

998716580
001/27530/00: RNCC: 3 | RNVC: 2
80996065009: RNCC: 5 | RNVC: 2
27530: RNCC: 5 | RNVC: 2

13 Jan 2011

5120-99-758-6041
Open End Wrench

5120-99-459-0500

5120-99-414-1880
Restrainer Gear

5120-99-757-4775

5120-99-459-2058

5120-99-384-0810
Mechanical Puller Attachment

993840810
EA6205G573-103: RNCC: 3 | RNVC: 2

17 Mar 2009

5120-99-411-9008
Peg Spanner

994119008
NO PRIMARY REF 99-411-9008: RNCC: 3 | RNVC: 2
ST2020: RNCC: 5 | RNVC: 9
27Q13596: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-741-1748
Suction Vice

997411748
NO PRIMARY REF 99-741-1748: RNCC: 3 | RNVC: 2
35180: RNCC: 5 | RNVC: 9
PS081C: RNCC: 6 | RNVC: 9

11 Oct 2005

5120-99-423-4588
Gyro Wi Pin Spanner

994234588
NO PRIMARY REF 99-423-4588: RNCC: 3 | RNVC: 2
9032-130: RNCC: 5 | RNVC: 2
558483: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-460-9111
Socket Wrench Spanner Attachment

994609111
MBEU-143090: RNCC: 3 | RNVC: 2

11 May 1993

5120-99-908-2185
Bearing Installer A

999082185
YB-6196: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-99-110-0598
Thread Fitting Kit

991100598
L3C62038: RNCC: 3 | RNVC: 2
0007I23: RNCC: 6 | RNVC: 9

14 Feb 2000

5120-99-105-0228
P Installation Tool

991050228
MBEU18802: RNCC: 3 | RNVC: 2
AMBEU18802: RNCC: 5 | RNVC: 2
27L2139: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-3338
Box Wrench

991353338
RH1922: RNCC: 3 | RNVC: 2
T2AD1012: RNCC: 5 | RNVC: 2
A5851D: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-522-1624

5120-99-880-6933
Socket Wrench Set

998806933
NO PRIMARY REF 99-880-6933: RNCC: 3 | RNVC: 2
059-02-038: RNCC: 5 | RNVC: 2
SEN582-0100K: RNCC: 5 | RNVC: 2

1 May 2001

5120-99-306-3214
Spanner Wrench

993063214
30-SPANNER-ASSY: RNCC: 3 | RNVC: 2
5476-19: RNCC: 6 | RNVC: 9

12 Jun 2013

5120-99-891-0474
Lap

998910474
NO PRIMARY REF 99-891-0474: RNCC: 3 | RNVC: 2
64LL1609: RNCC: 5 | RNVC: 2

26 Jul 2005

5120-99-784-8852
Weldamatic Electrod

997848852
DD1739: RNCC: 3 | RNVC: 2
GA7105: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-763-9332
Mechanical Puller

997639332
460009450C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-6716
Hand Hammer

997826716
HAA070750: RNCC: 3 | RNVC: 2
17610: RNCC: 5 | RNVC: 2

11 Mar 2004

5120-99-780-3328
Open End Wrench

997803328
131067: RNCC: 3 | RNVC: 2
020472: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-779-7785
Bicycle Spanner

997797785
ART153: RNCC: 3 | RNVC: 2
GMM379: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-780-0584
Ratchet Spanner

997800584
M13483: RNCC: 3 | RNVC: 2

16 Feb 1993

5120-99-773-0249
Body

997730249
CH749-281: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-594-2480
Spanner

995942480
FCOM21: RNCC: 3 | RNVC: 2
0625P-158: RNCC: 6 | RNVC: 9
062KT-140: RNCC: 6 | RNVC: 9

25 May 2006

5120-99-735-4692
Support Block

997354692
34633A10: RNCC: 3 | RNVC: 2
A34633A10/B: RNCC: 5 | RNVC: 2

25 Apr 1991