What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 85 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 85 of 108

5120-99-958-3041
Socket Wrench Attachment Universal Joint

999583041
TL-502-877: RNCC: 3 | RNVC: 2
TL-502-877: RNCC: 3 | RNVC: 9

28 Oct 2008

5120-99-825-7901
Hub Lock Ring Tool

998257901
NO PRIMARY REF 99-825-7901: RNCC: 3 | RNVC: 2
FV774515: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-548-0867
Socket Wrench

995480867
UX10519: RNCC: 3 | RNVC: 2
734-352051: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-911-7666
Tool With Cutter

999117666
320-7554-001: RNCC: 3 | RNVC: 2
4G1A: RNCC: 6 | RNVC: 9

18 Mar 1997

5120-99-967-0896
Torque Wrench Adapter

999670896
SM1024: RNCC: 3 | RNVC: 2
DDE31993/518: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-881-4509
Box Wrench

998814509
NO PRIMARY REF 99-881-4509: RNCC: 3 | RNVC: 2
CBY7044-841: RNCC: 5 | RNVC: 2
ET841: RNCC: 5 | RNVC: 2
7044-841: RNCC: 5 | RNVC: 2
Y7044-841: RNCC: 5 | RNVC: 2
E6FQ000041: RNCC: 6 | RNVC: 9
LV6MT12CB7044-841: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-4255
Hand Blind Riveter

991244255
7160-0004: RNCC: 3 | RNVC: 2
7160: RNCC: 5 | RNVC: 1
JB: RNCC: 5 | RNVC: 1
7160-0004: RNCC: 5 | RNVC: 2
7160-0004: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-138-0161
Torque Wrench

991380161
76-190: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT32: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-401-3875
Bracket For Indicat

994013875
NO PRIMARY REF 99-401-3875: RNCC: 3 | RNVC: 2
262760: RNCC: 5 | RNVC: 2
16C5478: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-803-0200
Lar Wheel Extractor

998030200
NO PRIMARY REF 99-803-0200: RNCC: 3 | RNVC: 2
LV6MT2-18902: RNCC: 5 | RNVC: 2

20 Mar 1980

5120-99-746-8926
Spanner Wrench

997468926
GH: RNCC: 3 | RNVC: 2
H814-298055: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-830-7353
Gear Centering Bush

998307353
9992438: RNCC: 3 | RNVC: 2
689-9992-438: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-869-2221
Ratchet Wrench

998692221
D/DGES(A)/133/01/02: RNCC: 4 | RNVC: 1
SIZE 15 X 17MM A/F: RNCC: 6 | RNVC: 9
TEJ6003: RNCC: 6 | RNVC: 9

14 Sep 1994

5120-99-910-4271
Socket Wrench Socket

999104271
BS4006: RNCC: 4 | RNVC: 1
H20037: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4564: RNCC: 6 | RNVC: 9
FA17579: RNCC: 6 | RNVC: 9
1L16: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-301-3382
Pin Deployment Tool

993013382
BR90-14-49-01-0001: RNCC: 3 | RNVC: 2

27 Apr 1995

5120-99-201-8176
Socket Wrench

992018176
9946-134: RNCC: 3 | RNVC: 2
E0000353: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-291-6059
Hand Tool

992916059
STD419C/46Y: RNCC: 3 | RNVC: 2
26DL-95957: RNCC: 6 | RNVC: 9

20 Jun 2002

5120-99-556-3420
Socket Wrench Socket

995563420
1811911TEMA: RNCC: 3 | RNVC: 2
181191-4241TEMA: RNCC: 5 | RNVC: 2
181191A: RNCC: 5 | RNVC: 2
929-128459: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-9890
H Blind Riveter Jaw

5120-99-470-7110
Sleeve

994707110
A505143-06: RNCC: 3 | RNVC: 2
102A505143-06: RNCC: 5 | RNVC: 2
102A505143DETA1L6: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-131-8751
Spacer

991318751
EB6505G501-109: RNCC: 3 | RNVC: 2

19 Mar 2004

5120-99-767-8961
Hand Terminal Crimping Tool

997678961
206-204: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-7058
Open End Wrench

999107058
BS2583-TABLE 2 7/8A/F: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-808-5707
Closing Plu Spanner

998085707
NO PRIMARY REF 99-808-5707: RNCC: 3 | RNVC: 2
7044-3: RNCC: 5 | RNVC: 2
LV6MT12CB7044-3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6190
Box Wrench

999106190
BS3555-TABLE 3 1-1/4X1-3/8BS: RNCC: 4 | RNVC: 1
BS3555: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-777-9467
Bolt Removal Tool

997779467
Y3J70682A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-1877
Lifting Tool

996171877
HU17950: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-308-1176
Drive Pin Punch

993081176
W5747316C: RNCC: 3 | RNVC: 2
W 5747 316C: RNCC: 5 | RNVC: 2

11 Feb 2003

5120-99-558-4814
Spanner Wrench

995584814
SSN04/550/803/104: RNCC: 3 | RNVC: 2
550-803-104: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-147-6110
Flat Tip Screwdriver

991476110
OD31904/04: RNCC: 3 | RNVC: 2

21 Oct 2002

5120-99-428-1789
Screwdriver Bit

994281789
NO PRIMARY REF 99-428-1789: RNCC: 3 | RNVC: 2
N0D2438: RNCC: 5 | RNVC: 2
99-428-1791: RNCC: 6 | RNVC: 9
518586: RNCC: 6 | RNVC: 9
518651: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-100-7457
Socket Head Screw Key

991007457
17103-115: RNCC: 3 | RNVC: 2
E17103-115: RNCC: 5 | RNVC: 2
D/NSC/ES521C/308/11/1/A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-2995
Seal Remover

994542995
WG1388-3290-041: RNCC: 3 | RNVC: 2
XP98PA01486: RNCC: 6 | RNVC: 9

23 Jan 1998

5120-99-402-0451
Valve Pilot Cutter

994020451
NO PRIMARY REF 99-402-0451: RNCC: 3 | RNVC: 2
316-12: RNCC: 5 | RNVC: 2
316-12: RNCC: 5 | RNVC: 2
16C5668: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-554-5491
Dam Dowel Extractor

5120-99-541-7874

5120-99-465-3812

5120-99-940-0358
Hexagon Bit Set

999400358
NO PRIMARY REF 99-940-0358: RNCC: 3 | RNVC: 2
12197: RNCC: 5 | RNVC: 2

9 Jun 2004

5120-99-495-7170
Sleeve Guide

994957170
453 7785-081: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-225-9320
Prick Punch

992259320
STANDARD 27 LETTERS SET (10MM): RNCC: 3 | RNVC: 2
053YA-0016: RNCC: 6 | RNVC: 9

23 Nov 2005

5120-99-794-4225
Screwdriver Bit

997944225
TW-5-ACR: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-000-3061
Inspection Mirror

990003061
VM/B/D II: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-337-1051
Retriever

993371051
826/1: RNCC: 3 | RNVC: 2
826/1 (FACOM): RNCC: 5 | RNVC: 2

11 Dec 1995

5120-99-983-0740
Torque Wrench

999830740
A96901: RNCC: 3 | RNVC: 2
A96900: RNCC: 5 | RNVC: 1
TBN 2: RNCC: 5 | RNVC: 1
N09156/001: RNCC: 5 | RNVC: 2
011100: RNCC: 6 | RNVC: 9
FG9802J8008: RNCC: 6 | RNVC: 9

2 Mar 1998

5120-99-194-4184
Fi Open Jaw Spanner

991944184
A95-33945: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-459-0545
Socket Wrench Handle Bar

994590545
KB6037: RNCC: 3 | RNVC: 2
64VV4: RNCC: 6 | RNVC: 9
85-101-2560: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-874-7614
Socket Adaptor

998747614
P5T1488326: RNCC: 3 | RNVC: 2
0625P-174: RNCC: 6 | RNVC: 9
062KT-156: RNCC: 6 | RNVC: 9

25 May 2006

5120-99-836-2901
Single Ende Spanner

998362901
NO PRIMARY REF 99-836-2901: RNCC: 3 | RNVC: 2
LV7GA11-27: RNCC: 5 | RNVC: 2

3 Aug 1983

5120-99-766-4067

5120-99-838-4488

5120-99-770-2471
Clamping Cap

5120-99-763-5635
Tapwrench

5120-99-856-4295
Pliers

998564295
91-846-184-01: RNCC: 3 | RNVC: 2
020150 R1 DL00024: RNCC: 5 | RNVC: 2

4 Sep 2009

5120-99-782-9773
Hammer Handle

997829773
NO PRIMARY REF 99-782-9773: RNCC: 3 | RNVC: 2
BS3823:1990: RNCC: 5 | RNVC: 1
B12051: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-790-1135
Piston Inserter

997901135
T6253S88: RNCC: 3 | RNVC: 2
T6253/88: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-795-5053
Hand Hydraulic Jack

997955053
ME-22-1416: RNCC: 3 | RNVC: 2
ME-20-1416: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-781-4600
Clamp Block Vice

997814600
2877A7: RNCC: 3 | RNVC: 2
H2877A7: RNCC: 5 | RNVC: 2
85-690-1575: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-763-8763
Bearing And Bushing Driver

997638763
T7301-407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-558-5290
Socket Wrench Handle Bar

995585290
SU6025-15: RNCC: 3 | RNVC: 2
12-74967: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-639-7447
Socket H Wrench Key

996397447
NAW876: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-207-8864
Spring Button

992078864
GMC75963-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-746-0465
Inn Puller Assembly

997460465
V5998/1: RNCC: 3 | RNVC: 2

5 May 1987

5120-99-904-4077
Installation A Tool

999044077
460005676: RNCC: 3 | RNVC: 2
100405-9001-337: RNCC: 6 | RNVC: 9
UW231B1: RNCC: 6 | RNVC: 9

27 Jan 1993

5120-99-557-6918
Ring Spanner

995576918
703699: RNCC: 3 | RNVC: 2
250610: RNCC: 5 | RNVC: 1
703699-911: RNCC: 5 | RNVC: 2
929-273077: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-837-6973
Crankshaft Remover

998376973
CT6040B: RNCC: 3 | RNVC: 2
CPT6040B: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-826-6611
Extractor Bevel

998266611
FV1051678: RNCC: 3 | RNVC: 2
111881ST: RNCC: 5 | RNVC: 2

28 Jan 1983

5120-99-802-6933
Socket Wrench Handle Bar

998026933
FV300200: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-1098
Open End Wrench

997821098
0W3: RNCC: 3 | RNVC: 2
H02344: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-830-1814
T-Bar

998301814
6144: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-783-1198
Lock Plat Installer

997831198
LC353: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-827-2617
Special Tool Screw

998272617
FV817680: RNCC: 3 | RNVC: 2

1 Mar 1977

5120-99-860-4827
Output Yoke Socket

998604827
0485189: RNCC: 3 | RNVC: 2
LC1024: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-862-1079
Output Locknut Tool

998621079
FV1051691: RNCC: 3 | RNVC: 2
113828ST: RNCC: 5 | RNVC: 2

2 Feb 1983

5120-99-781-5763
Fuse Puller

997815763
3NX1 011: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-551-4021
Torque Screwdriver

995514021
X72/GA/2156/528: RNCC: 3 | RNVC: 2
0635K-001: RNCC: 6 | RNVC: 9

12 Jul 2006

5120-99-127-7330
Hand Tube Bender

991277330
NO PRIMARY REF 99-127-7330: RNCC: 3 | RNVC: 2
013481: RNCC: 5 | RNVC: 2
1975SQUARE1-2INCOPPER: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-122-0851
Open End Wrench

991220851
6J7881: RNCC: 3 | RNVC: 2
BS192-TABLE 2 25/32X13/16A/F: RNCC: 4 | RNVC: 1
F1FA17100: RNCC: 5 | RNVC: 2
H20113: RNCC: 5 | RNVC: 2
DEF STAN 51-11 (PART 28): RNCC: 6 | RNVC: 9
TABLE 2. 25/32 A/F X 13/16 A/F: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-288-7010
C Clamp

992887010
NO PRIMARY REF 99-288-7010: RNCC: 3 | RNVC: 2
01-6000: RNCC: 5 | RNVC: 2

12 Aug 2003

5120-99-759-1569
Socket H Wrench Key

997591569
A300-1-16: RNCC: 3 | RNVC: 2

26 Nov 1982

5120-99-666-1244
Socket Head Screw Key

996661244
WD1941-049: RNCC: 3 | RNVC: 2
WSTHK13: RNCC: 5 | RNVC: 2
040XG0002: RNCC: 6 | RNVC: 9

20 Mar 2004

5120-99-660-5671
Adhesive Scr Trowel

996605671
NO PRIMARY REF 99-660-5671: RNCC: 3 | RNVC: 2
10063: RNCC: 5 | RNVC: 2

4 Mar 1993

5120-99-127-8341
Socket Wrench Handle

991278341
H6407: RNCC: 2 | RNVC: 2
NO PRIMARY REF 99-127-8341: RNCC: 3 | RNVC: 2
BS4006: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-613-4626
Six Point Tip Screwdriver Set

996134626
SDRIV2: RNCC: 3 | RNVC: 2
BRT-SDRIV2: RNCC: 5 | RNVC: 2
3711504C91: RNCC: 5 | RNVC: 2
495-0965: RNCC: 5 | RNVC: 2

19 Nov 2009

5120-99-655-5112
Torque Wrench Adapter

996555112
A0118085-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-713-1742
Spanner Wrench

997131742
KU12751A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-5113
Torque Wrench Adapter

996555113
A0118085-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-724-2413
Socket Wrench Handle

997242413
HU 27588: RNCC: 3 | RNVC: 2

11 Aug 2003

5120-99-256-9246
Flint And Striker

992569246
FIREBALL: RNCC: 3 | RNVC: 2

18 Apr 2008

5120-99-724-5171
Spanner Wrench

997245171
9535-W702: RNCC: 3 | RNVC: 2

7 Feb 2006

5120-99-558-4118
Socket Head Scr Key

5120-99-140-1344

5120-99-454-7671
Open End Wrench

5120-99-533-8692
Tool Set

995338692
CUTA281011-4C: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-99-891-0479
Holding Block

998910479
CH729-1112: RNCC: 3 | RNVC: 2
4TU4938060: RNCC: 6 | RNVC: 9

20 Aug 2005

5120-99-840-0987
Spanner Wrench

998400987
SST/Y/581/00/0307/101: RNCC: 3 | RNVC: 2
001293839: RNCC: 5 | RNVC: 1
001293839 PART 101: RNCC: 5 | RNVC: 2
SST/Y/581/00/0307/000 PART 101: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-800-2485
Extractor

998002485
095811: RNCC: 3 | RNVC: 2
4A-5002: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-799-5636
Mechanical Puller

997995636
Y03319403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-737-0307
Spanner Wrench

997370307
100405-0503-003: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-115-9624
Removal Tool

991159624
NO PRIMARY REF 99-115-9624: RNCC: 3 | RNVC: 2
JA6565-02: RNCC: 5 | RNVC: 2
DAS874146: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-2265
Socket Wrench Extension

991242265
D96: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-734-0166
Seal Inserter

997340166
453-7408-013: RNCC: 3 | RNVC: 2
21-059A: RNCC: 5 | RNVC: 2
21-059C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-0465
Cross Tip Screwdriver

991240465
1C6415: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 16): RNCC: 4 | RNVC: 1
1C6415: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-580-5406
Screw Thread Insert Inserter

995805406
A29-20: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-654-2994
Mechanical Puller

996542994
P-890155-407: RNCC: 3 | RNVC: 2
P890155-407: RNCC: 5 | RNVC: 2

10 May 1980

5120-99-883-3494
Drift

998833494
7236-21429: RNCC: 3 | RNVC: 2
7236-21429-40: RNCC: 5 | RNVC: 2
7236-21429-40-1: RNCC: 5 | RNVC: 2
5040765: RNCC: 5 | RNVC: 2
AST10093: RNCC: 5 | RNVC: 2

5 May 2011

5120-99-127-6055
Open End Wrench

991276055
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
Y161A: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H6171: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-646-8013
Jack Packing Timber

996468013
1568636: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-99-993-0313
Spanner

999930313
MBEU163817: RNCC: 3 | RNVC: 2
MBEU163817: RNCC: 5 | RNVC: 2

14 Jan 2002

5120-99-836-5477
Socket Head Screw Key

998365477
ALL5MLA: RNCC: 3 | RNVC: 2

17 Jun 2009

5120-99-837-7477
Lead Pin

998377477
FV970731: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-837-9868
Hook Wrench

998379868
110-115: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-204-8387
Swivel Cradle

992048387
W132100: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-1074
Face Spanner Wrench Socket

997601074
T10092-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-456-1526
Hook Spanner

994561526
2 0067-805: RNCC: 3 | RNVC: 2

7 Mar 2003

5120-99-910-4678
Hand Hammer

999104678
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
BS876: RNCC: 4 | RNVC: 1
H20141: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-304-0917
Solid Center Punch

993040917
W 5747 311 C: RNCC: 3 | RNVC: 2

28 Jan 1999

5120-99-173-0769
Spanner

991730769
520551-02: RNCC: 3 | RNVC: 2
SR1575/7: RNCC: 5 | RNVC: 2
D0006-95/7: RNCC: 6 | RNVC: 9

19 Nov 1997

5120-99-122-5138
Socket Wrench Socket

991225138
KS261: RNCC: 3 | RNVC: 2
T2BJ7165: RNCC: 5 | RNVC: 2
1L526: RNCC: 6 | RNVC: 9
D/NSC/ES394/088/1/37: RNCC: 6 | RNVC: 9
T2BJ7165 LOCK-ON: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-232-3110
Socket Head Screw Key

992323110
025-0459: RNCC: 3 | RNVC: 2
337-096-000-01: RNCC: 5 | RNVC: 2

23 Sep 2003

5120-99-533-9813
Nose Assembly

995339813
7494-3200: RNCC: 3 | RNVC: 2
7494-3200: RNCC: 5 | RNVC: 2
7494-3200: RNCC: 5 | RNVC: 9
85-690-4394: RNCC: 6 | RNVC: 9

11 Sep 1991

5120-99-411-9035
Assembly Tool

994119035
NO PRIMARY REF 99-411-9035: RNCC: 3 | RNVC: 2
ST1619: RNCC: 5 | RNVC: 9
27Q13480: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-601-8819
Torque Wrench

996018819
NO PRIMARY REF 99-601-8819: RNCC: 3 | RNVC: 2
1C8657: RNCC: 5 | RNVC: 2

12 Sep 2005

5120-99-130-2107

5120-99-132-0619
Reaction Bar

5120-99-196-1456

5120-99-197-5803

5120-99-150-3302

5120-99-840-8037
Socket

998408037
A1039012: RNCC: 3 | RNVC: 2
STAHWILLIE 03030024: RNCC: 5 | RNVC: 2

4 Apr 2001

5120-99-664-0324
Torque Wrench

996640324
14015: RNCC: 3 | RNVC: 2
MODEL 800: RNCC: 5 | RNVC: 2

29 Jun 1998

5120-99-874-1922

5120-99-255-2191
Installing Tool

5120-99-075-5529
Open End Wrench

990755529
IT/1125AFGU: RNCC: 3 | RNVC: 2

23 Nov 1993

5120-99-744-1420
Actuator Co Adaptor

997441420
VR2139-16: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-253-9288
Crankshaf Extractor

992539288
LRT-12-078: RNCC: 3 | RNVC: 2
LRT-12-078: RNCC: 5 | RNVC: 2

15 Sep 2009

5120-99-754-5381
Spanner Wrench

997545381
P-890613-407: RNCC: 3 | RNVC: 2
P890613-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-851-7443
Socket Head Screw Key

998517443
T0940000067739: RNCC: 3 | RNVC: 2

25 Jun 2013

5120-99-020-8180
Seal Bullet

990208180
460004273: RNCC: 3 | RNVC: 2

5 Jan 1998

5120-99-388-5694
Retaining Ring Installation Tool

993885694
AM64608: RNCC: 3 | RNVC: 2

8 Dec 1998

5120-99-660-6684
Reamer Bush

996606684
R.219: RNCC: 3 | RNVC: 2
3AP5203: RNCC: 6 | RNVC: 9

10 Aug 1993

5120-99-465-7009
Socket Wrench Adapter

994657009
BS4006-TABLE 35: RNCC: 2 | RNVC: 2
HSGP: RNCC: 3 | RNVC: 2
SAC216: RNCC: 3 | RNVC: 2
BS4006-SECTION G TABLE 31 (1966): RNCC: 6 | RNVC: 9
SECTION G:TABLE 31: RNCC: 6 | RNVC: 9
1L333: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-745-9361
Wrench Spanner

997459361
T7071-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-973-9392
Tommy Bar

999739392
ER1205G010-167: RNCC: 3 | RNVC: 2

17 May 2003

5120-99-428-8356
Wrench Support

994288356
SGE3210-2400: RNCC: 3 | RNVC: 2

29 May 2012

5120-99-803-0233
Ti Pulley Extractor

998030233
0802216: RNCC: 3 | RNVC: 2
330: RNCC: 3 | RNVC: 2
350: RNCC: 5 | RNVC: 2
LV6MT2-27198: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-205-4587
Socket Head Screw Key

992054587
441-0028: RNCC: 3 | RNVC: 2
24292-0: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-147-9001
Mechanical Puller Adapter

991479001
S1007412: RNCC: 3 | RNVC: 2
730/08/13-22: RNCC: 6 | RNVC: 9

11 Oct 2005

5120-99-130-1533
Insertion And Extra

991301533
NO PRIMARY REF 99-130-1533: RNCC: 3 | RNVC: 2
C1ETCK1: RNCC: 5 | RNVC: 9
CIET-CK-1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-825-6744
Pump Shaft Remover

998256744
NO PRIMARY REF 99-825-6744: RNCC: 3 | RNVC: 2
MF303: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-251-5972
Loading Tool

992515972
7-333-80-123: RNCC: 3 | RNVC: 2

19 Sep 1989

5120-99-666-1786
Inspection Mirror

996661786
7285/517: RNCC: 3 | RNVC: 2

4 Jun 2004

5120-99-961-8166
Screwdriver And Wre

999618166
NO PRIMARY REF 99-961-8166: RNCC: 3 | RNVC: 2
DDE2684: RNCC: 5 | RNVC: 2
C1BE4240: RNCC: 6 | RNVC: 9
22325811: RNCC: 6 | RNVC: 9
7A2830: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-822-3753
Trac Clamp Assembly

998223753
NO PRIMARY REF 99-822-3753: RNCC: 3 | RNVC: 2
FV769464: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-139-1029
Screw Thread Insert Inserter

991391029
M1P112: RNCC: 3 | RNVC: 2
DEFSTAN51-17: RNCC: 4 | RNVC: 1
1B: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-517-0602
Socket Wrench Socket

995170602
NMT-157: RNCC: 3 | RNVC: 2

27 Nov 1998

5120-99-910-6324
Socket Wrench Handle

999106324
DEF STAN 51-11 PART 4: RNCC: 4 | RNVC: 1
BS4006-TABLE 31 10MM: RNCC: 4 | RNVC: 1
H4425: RNCC: 6 | RNVC: 9
TABLE I(J) 3/8A/F: RNCC: 6 | RNVC: 9
0277: RNCC: 6 | RNVC: 9
1L11: RNCC: 6 | RNVC: 9
3084: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-792-9877
Spanner Wrench

997929877
ST112/178: RNCC: 3 | RNVC: 2
X5008/12/178 ITEM 3: RNCC: 5 | RNVC: 2
X5008/12/178/3: RNCC: 5 | RNVC: 2
178/3: RNCC: 5 | RNVC: 2
ST112: RNCC: 5 | RNVC: 2
178 ITEM 3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-434-9197
Oil Punch Assembly

994349197
NT3823: RNCC: 3 | RNVC: 2
5UA6546: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-459-0828
Socket Wrench Crowfoot Attachment

994590828
KU.12706: RNCC: 3 | RNVC: 2
64AE61: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-451-0230
Spanner

994510230
T328937: RNCC: 3 | RNVC: 2
5W6400: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-052-2920
Mechanical Puller

990522920
PE59794: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-613-1512
Socket Head Screw Key

996131512
NO PRIMARY REF 99-613-1512: RNCC: 3 | RNVC: 2
735-043: RNCC: 5 | RNVC: 2
735-043: RNCC: 5 | RNVC: 2

19 Jul 2005

5120-99-960-4315
Mecha Breech Wrench

999604315
NO PRIMARY REF 99-960-4315: RNCC: 3 | RNVC: 2
CM8517: RNCC: 5 | RNVC: 9
CM8517: RNCC: 5 | RNVC: 9
M3CM8517: RNCC: 6 | RNVC: 9
223376: RNCC: 6 | RNVC: 9
7E9604315: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-869-3608
Nut Spinner Blade

998693608
5490-06-SOCKET 6MM: RNCC: 3 | RNVC: 2

22 Aug 1995

5120-99-429-4389
Slave Motor Spanner

994294389
NO PRIMARY REF 99-429-4389: RNCC: 3 | RNVC: 2
N0DM6631-12: RNCC: 5 | RNVC: 2
603426: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-192-1548
Mechanical Puller

991921548
91-46086A1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-548-2883
Spanner Wrench

995482883
3485-20SH27: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-564-9050
Combination Box And Open End Wrench

995649050
100857-9000-008: RNCC: 3 | RNVC: 2
100857-9000-008: RNCC: 5 | RNVC: 2
WE123A2: RNCC: 6 | RNVC: 9

31 Jul 1998

5120-99-269-1513
Box Wrench

992691513
110079-9071: RNCC: 3 | RNVC: 2
26VC-95621: RNCC: 6 | RNVC: 9

2 Mar 2002

5120-99-137-2928
Screwdriver Bit

991372928
TWD4: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
TWD4: RNCC: 5 | RNVC: 2
TWD4: RNCC: 5 | RNVC: 2
56J90009: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-725-9658
Socket Wrench Handle Bar

997259658
077781: RNCC: 3 | RNVC: 2
6880-2785: RNCC: 5 | RNVC: 2

19 Apr 2010

5120-99-136-6386
Screw Thread Insert Tang Breakoff Tool

991366386
DEFSTAN51-17-1E: RNCC: 2 | RNVC: 2
SMTB105: RNCC: 3 | RNVC: 2
SMTB-105(TBO-54): RNCC: 5 | RNVC: 2
DEFSTAN51-17: RNCC: 5 | RNVC: 2
1C8258: RNCC: 6 | RNVC: 9
1E: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-325-0444
Socket

993250444
NO PRIMARY REF 99-325-0444: RNCC: 3 | RNVC: 2
TS141: RNCC: 5 | RNVC: 2
C569-70T279305: RNCC: 6 | RNVC: 9

24 May 2002

5120-99-666-4728
Cross Tip Screwdriver

996664728
1-67-048: RNCC: 3 | RNVC: 2
381-4234: RNCC: 5 | RNVC: 2
381-4234: RNCC: 5 | RNVC: 2

15 Jul 2005

5120-99-760-6515
C Clamp

997606515
FHQ6294/405: RNCC: 3 | RNVC: 2
FHQ6294-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-130-2097
Box Wrench

991302097
SSA242: RNCC: 3 | RNVC: 2
A3655: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-721-9333
Spacer

997219333
460009316-4: RNCC: 3 | RNVC: 2
460009316DETAIL4: RNCC: 6 | RNVC: 9

2 Sep 1989

5120-99-122-7609
Screw Thread Insert Inserter

991227609
528-9: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-257-5723
Box Wrench

992575723
BUGGSIE 748: RNCC: 3 | RNVC: 2
748: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-542-6366
Spanner Wrench

5120-99-542-4556

5120-99-445-0728

5120-99-444-9832

5120-99-540-7061
Spanner Wrench

5120-99-438-8128

5120-99-546-6671
Spring Compression

5120-99-436-0149
Extractor

5120-99-453-7598

5120-99-423-5012

5120-99-120-8396
Socket Wrench Socket

991208396
BS4006-TABLE 7 1BA: RNCC: 4 | RNVC: 1
DH365: RNCC: 5 | RNVC: 2
H21392: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6278: RNCC: 6 | RNVC: 9
TABLE I(F) 1BA: RNCC: 6 | RNVC: 9
851643: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-533-4809
Spec Wrench Spanner

995334809
NO PRIMARY REF 99-533-4809: RNCC: 3 | RNVC: 2
B41041-5: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-613-1406
Retaining Ring Tool

996131406
T138-1-1AA: RNCC: 3 | RNVC: 2
T138-1-1AA: RNCC: 5 | RNVC: 2
26PH6480091: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-729-1593
Socket Wrench Socket

997291593
3201-81170-55-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-525-8477
Spanner Wrench

995258477
1023-82-15: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-428-7470
Blacksmith's Anvil

994287470
NO PRIMARY REF 99-428-7470: RNCC: 3 | RNVC: 2
F1FA10008: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-410-3886
Socket Wrench Socket

994103886
SM16 LOCK-ON: RNCC: 3 | RNVC: 2
SM16 LOCK-ON: RNCC: 5 | RNVC: 2
SM16 LOCK-ON: RNCC: 5 | RNVC: 2

25 Mar 1998

5120-99-440-4466
Drives Holding Tool

994404466
YB-6201: RNCC: 3 | RNVC: 2
100560: RNCC: 5 | RNVC: 2
YB-6201: RNCC: 5 | RNVC: 2

12 Feb 1996

5120-99-441-1163
Quick Adjusting Screw Clamp

994411163
89009165: RNCC: 3 | RNVC: 2
R62782 ITEM 8: RNCC: 5 | RNVC: 2

29 Mar 2011

5120-99-559-5105
Wrench Spanner

995595105
A6504-3: RNCC: 3 | RNVC: 2
190-223689: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-227-6367
Hand Tool

992276367
STD419C/71Y: RNCC: 3 | RNVC: 2
26DL-95970: RNCC: 6 | RNVC: 9

4 Jul 2002

5120-99-274-4465
Wrench Adaptor

992744465
159-3327: RNCC: 3 | RNVC: 2
CV177243: RNCC: 5 | RNVC: 2

24 Oct 2008

5120-99-962-3542
Spring Compression

999623542
AS2434: RNCC: 3 | RNVC: 2
263508: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-726-4059
Socket Head Screw Key

997264059
NFB486: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-815-2808
Circlip Assembly To

998152808
TD30254: RNCC: 3 | RNVC: 2
LV1TMTD30254: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-961-7740
For Clearance Float

999617740
SA1D971A: RNCC: 3 | RNVC: 2
223680: RNCC: 6 | RNVC: 9
B2BC3494: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-961-7739
Drift

999617739
SA1D964A: RNCC: 3 | RNVC: 2
B2BC3468: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-953-8836
Hand Tube Flaring Tool

999538836
AGS772: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-961-7674
Drift

999617674
B2BC3469: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-755-9713
Open End Box Wrench

997559713
GU.17476: RNCC: 3 | RNVC: 2
GU17476: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-517-2100
Socket Wrench Socket

995172100
HB1812: RNCC: 3 | RNVC: 2
T14075: RNCC: 5 | RNVC: 2

10 Feb 1995

5120-99-782-5778
Pliers Jaw Insert

997825778
410-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-753-9741
Spring Compressor

997539741
J24204-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-369-1183
Unit P Setting Tool

5120-99-714-6263
Spanner Wrench

997146263
PC5278: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-202-0113
Wire Rope Assembly

992020113
2967010: RNCC: 3 | RNVC: 1
MAXIFLEX T35: RNCC: 5 | RNVC: 1
2903: RNCC: 6 | RNVC: 9
29167010: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-832-6876
Forward Compressor

998326876
NO PRIMARY REF 99-832-6876: RNCC: 3 | RNVC: 2
J24839: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-133-5423
Thre Anchor-Adaptor

991335423
A0/1010/M6D: RNCC: 3 | RNVC: 2
NPPOGAMA4B2060405: RNCC: 6 | RNVC: 9

5 Jul 2005

5120-99-902-6670
Recess Scriber

999026670
NO PRIMARY REF 99-902-6670: RNCC: 3 | RNVC: 2
11140: RNCC: 5 | RNVC: 2

4 Mar 1993

5120-99-581-6932
Seal Press Tool

995816932
WG1388-3353-101: RNCC: 3 | RNVC: 2
XP97PI01246: RNCC: 6 | RNVC: 9
WG1369-7101-041-W039A: RNCC: 6 | RNVC: 9

15 Sep 1997

5120-99-538-6390
Extractor Assembly

995386390
NO PRIMARY REF 99-538-6390: RNCC: 3 | RNVC: 2
F45241: RNCC: 5 | RNVC: 2
CF45241: RNCC: 5 | RNVC: 2
H454-538-6390: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-2222
Socket Wrench Crowfoot Attachment

991302222
1950M26MM: RNCC: 3 | RNVC: 2
1950M-26: RNCC: 5 | RNVC: 2
10W50008: RNCC: 6 | RNVC: 9
440-26: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-192-2438
Seal And Installer

991922438
15-080: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-541-9465
Open Jaw An Spanner

995419465
9002-1268: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-4971
Open Jaw Spann Head

997104971
NO PRIMARY REF 99-710-4971: RNCC: 3 | RNVC: 2
PE16090: RNCC: 5 | RNVC: 9

28 May 1970

5120-99-667-1020
Seal And Installer

996671020
15-078: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-784-0369
Extractor Tool

997840369
CES NKCS-04-3/1 1.2.16.40.1: RNCC: 3 | RNVC: 2

6 May 1987

5120-99-437-5907
Spanner Wrench

994375907
13258: RNCC: 3 | RNVC: 2
0277-13258: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-151-6448
Hand Terminal Crimping Tool

991516448
TOO05433: RNCC: 3 | RNVC: 2
25977071: RNCC: 5 | RNVC: 2

17 May 2010

5120-99-580-3522
Crowfoot Attachment

995803522
J5356FL: RNCC: 3 | RNVC: 2
UWS4B: RNCC: 6 | RNVC: 9

17 Aug 2000

5120-99-798-8325
Spanner Wrench

997988325
MD.SK.853/149: RNCC: 3 | RNVC: 2
AP14909: RNCC: 6 | RNVC: 9
S.F.19450: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-923-9085
Screw Thread Insert Inserter

999239085
528-04: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
0274-274045: RNCC: 6 | RNVC: 9
0274-923-9085: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-533-8685
Damper Adjustment T

995338685
570-4198-01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-7760
Rivet Bucking Bar

999107760
DEF1221-H5142: RNCC: 2 | RNVC: 2
DEF1221: RNCC: 5 | RNVC: 2
H5142: RNCC: 6 | RNVC: 9
1C5452: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-645-0564
Seal Inserter

996450564
WD0388-00326-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-422-1433
Screwdriver

994221433
NO PRIMARY REF 99-422-1433: RNCC: 3 | RNVC: 2
272-10-11: RNCC: 5 | RNVC: 2
0633-400500: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-9025
Clamp Vice

994119025
NO PRIMARY REF 99-411-9025: RNCC: 3 | RNVC: 2
ST1215: RNCC: 5 | RNVC: 9
27Q12290: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-075-4521
Hand Abrasive Wheel Dresser

990754521
NO.0 HUNT HOLDER: RNCC: 3 | RNVC: 2
HU0: RNCC: 6 | RNVC: 9

20 Aug 1992

5120-99-789-4273
Clamp

997894273
CV190: RNCC: 3 | RNVC: 2
CV190: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-792-8836

5120-99-220-9404
Torque Wrench Adapter

992209404
LMT3318-1: RNCC: 3 | RNVC: 2
LMT3318-1: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-468-4375
Spanner Wrench

994684375
AE0409: RNCC: 3 | RNVC: 2
27M12287: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-414-1959
Restrainer

994141959
NO PRIMARY REF 99-414-1959: RNCC: 3 | RNVC: 2
WS16-70-10458: RNCC: 5 | RNVC: 9
26WX95005: RNCC: 6 | RNVC: 9
26WX95005: RNCC: 6 | RNVC: 9

7 Nov 1978

5120-99-401-2850
Master Nu Extractor

994012850
Z8087: RNCC: 3 | RNVC: 2
8310-188: RNCC: 5 | RNVC: 2
28449: RNCC: 5 | RNVC: 2
5430-27: RNCC: 5 | RNVC: 2
16C3077: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-203-5486
Spanner Wrench

992035486
F2-152B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-131-6912
Mechanical; Puller

991316912
TE1025: RNCC: 3 | RNVC: 2
032PR-004: RNCC: 6 | RNVC: 9

22 Jul 2003

5120-99-619-5777
Socket Wrench Socket

996195777
UT91: RNCC: 3 | RNVC: 2
C26-65: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-146-2938
Sea Installing Tool

991462938
S6170-35603-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-429-4405
Extra Tool Assembly

994294405
NO PRIMARY REF 99-429-4405: RNCC: 3 | RNVC: 2
6631-6: RNCC: 5 | RNVC: 2
603011: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-536-9473
Socket Wrench Handle Bar

995369473
TT140-74: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-461-8196
Spanner

994618196
A0107744: RNCC: 3 | RNVC: 2
27G3498: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-967-2000
Open End Wrench

999672000
NMT-263: RNCC: 3 | RNVC: 2

1 Dec 1998

5120-99-768-5219
D Installation Tool

997685219
LSS2/CHK/GSS/219: RNCC: 3 | RNVC: 2
CSDE/CHK/GSS/219: RNCC: 5 | RNVC: 2

22 Mar 1996

5120-99-136-0943
Socket Wrench Socket

991360943
EBM30: RNCC: 3 | RNVC: 2
HSM230: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 4: RNCC: 4 | RNVC: 1
BS4006-TABLE 13 30MM: RNCC: 4 | RNVC: 1
0D28371-04: RNCC: 5 | RNVC: 2
TABLE I(B) 30MM: RNCC: 6 | RNVC: 9
380-1220: RNCC: 6 | RNVC: 9
UW214A3: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-517-4139
Mirror Setting Tool

995174139
MS21853: RNCC: 3 | RNVC: 2
FV2206183: RNCC: 5 | RNVC: 2
DS/N/1041: RNCC: 7 | RNVC: 1

13 Aug 1997

5120-99-910-5934
Hand Shovel

999105934
BS3388:PART 1: RNCC: 4 | RNVC: 1
308283: RNCC: 5 | RNVC: 2
10-99-543: RNCC: 5 | RNVC: 2
789667: RNCC: 6 | RNVC: 9
4305/00/281/0: RNCC: 6 | RNVC: 9
JA1320: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-449-1145
Spanner

994491145
NO PRIMARY REF 99-449-1145: RNCC: 3 | RNVC: 2
9900-197: RNCC: 5 | RNVC: 2
88102-104-008: RNCC: 6 | RNVC: 9

31 Jan 1977

5120-99-533-0283
Pliers

995330283
317002: RNCC: 3 | RNVC: 2
85-120-19-10-1746: RNCC: 5 | RNVC: 2

2 Jun 1988

5120-99-401-3663
Thermosta Extractor

994013663
NO PRIMARY REF 99-401-3663: RNCC: 3 | RNVC: 2
RE22764: RNCC: 5 | RNVC: 2
16C5933: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-417-8599
Flat Tip Screwdriver

994178599
BE-8250L: RNCC: 3 | RNVC: 2
264-2460: RNCC: 5 | RNVC: 2
NSA038-316: RNCC: 5 | RNVC: 2
SPCISR/10/2/43/5/1: RNCC: 6 | RNVC: 9
060W5-0066: RNCC: 6 | RNVC: 9

14 Mar 2006

5120-99-654-4096
Torque Span Adaptor

996544096
460009092D: RNCC: 3 | RNVC: 2

27 Feb 1980

5120-99-104-8674
Stud Setter

991048674
FB154226: RNCC: 3 | RNVC: 2
M154226: RNCC: 5 | RNVC: 2
T185705: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-710-3877
Open End Wrench

997103877
PE9085: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-450-8458
Binocular Tool

994508458
0S3324A: RNCC: 3 | RNVC: 2
C1AFC2644DET13: RNCC: 5 | RNVC: 2
V70S3324A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-9997
Screwdriver Bit

991369997
SDM211: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-252-8571
Socket Head Screw Key

992528571
NO PRIMARY REF 99-252-8571: RNCC: 3 | RNVC: 2
7244-439: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-753-3768
Positioning Tool

997533768
CS 5072-A: RNCC: 3 | RNVC: 2

15 Jul 1987

5120-99-788-0058
Wrench Spanner

997880058
SSBN.01/515/808/29: RNCC: 3 | RNVC: 2
001112663: RNCC: 5 | RNVC: 1
515/808/29: RNCC: 5 | RNVC: 1
H926-936335: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-793-9875
Anti-S Work Station

997939875
NO PRIMARY REF 99-793-9875: RNCC: 3 | RNVC: 2
A-IPD-11010-5: RNCC: 5 | RNVC: 2
IPD-11010-5: RNCC: 5 | RNVC: 2
550-022: RNCC: 5 | RNVC: 2

4 Jan 1991

5120-99-411-9022
Sleeve

994119022
NO PRIMARY REF 99-411-9022: RNCC: 3 | RNVC: 2
ST1754: RNCC: 5 | RNVC: 9
27Q13491: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-982-0270
Needle Set

999820270
MRPC2201: RNCC: 3 | RNVC: 2
106C1-010: RNCC: 6 | RNVC: 9

5 Oct 2010

5120-99-756-9542
Half Ring

997569542
EA6505G521-101: RNCC: 3 | RNVC: 2

19 Mar 2004

5120-99-560-1774
Flat Tip Screwdriver

995601774
9110006: RNCC: 3 | RNVC: 2
T2FA1392: RNCC: 5 | RNVC: 2
911-61N: RNCC: 5 | RNVC: 2

3 Sep 1981

5120-99-900-1118
Desicca Screwdriver

999001118
NO PRIMARY REF 99-900-1118: RNCC: 3 | RNVC: 2
P7-51475-341: RNCC: 5 | RNVC: 2
0S82383: RNCC: 5 | RNVC: 2
P7-51475-341: RNCC: 5 | RNVC: 2

20 Sep 1982

5120-99-401-3547
Dynamo Shaf Spanner

994013547
NO PRIMARY REF 99-401-3547: RNCC: 3 | RNVC: 2
71244: RNCC: 5 | RNVC: 9
X3XCMS71244: RNCC: 6 | RNVC: 9
16C5967: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-887-3179
Socket Wrench Set

998873179
38220-000: RNCC: 3 | RNVC: 2

23 Jul 2012

5120-99-427-9018
Hand Pipe Bender

994279018
K2-4015: RNCC: 3 | RNVC: 2
K2: RNCC: 5 | RNVC: 2
3A2894: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-204-3225
Open End Wrench

992043225
E1-26815: RNCC: 3 | RNVC: 9
W8WHM91E1-26815: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-500-4236
Mechanical Puller

995004236
WD0188-10286-041: RNCC: 3 | RNVC: 2

1 Mar 1996

5120-99-910-6274
Socket Wrench

999106274
DEF STAN 51-11 PART 3: RNCC: 4 | RNVC: 1
BS2558-TABLE 6 8X9MM: RNCC: 4 | RNVC: 1
A3144: RNCC: 5 | RNVC: 2
TABLE I(B) 8X9MM: RNCC: 6 | RNVC: 9
F1FA17301: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-764-6520

5120-99-764-4420
Socket Head Scr Key

5120-99-828-5211
Torque Wre Ring End

5120-99-782-8417

5120-99-557-9492

5120-99-823-5151

5120-99-795-7440
Box Wrench

5120-99-765-7381
Torque Wren Adapter

5120-99-768-1485
Spanner Wrench

5120-99-655-4453
Open End Wrench

996554453
ARLAIR316-13-403: RNCC: 3 | RNVC: 2
316/13: RNCC: 5 | RNVC: 2
ARLAIR31613-403: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-741-6428
Tool Swaging

997416428
48441-A3ITEM2: RNCC: 3 | RNVC: 2
48441A3DETAIL2: RNCC: 5 | RNVC: 2
48441A3DETA1L2: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-097-0134
Wrench Spanner

990970134
58246: RNCC: 3 | RNVC: 1
DEFSTAN59-35 PART 1 SECTION 1: RNCC: 4 | RNVC: 1
4: RNCC: 5 | RNVC: 1
F1FA17627: RNCC: 6 | RNVC: 9
DEF5321: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6580
Trowel

999106580
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
H2924: RNCC: 6 | RNVC: 9
1K237: RNCC: 6 | RNVC: 9
DL-9-A-H2924: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-989-6413
Plastic Mallet

999896413
NO PRIMARY REF 99-989-6413: RNCC: 3 | RNVC: 2
KEN-527-3080K: RNCC: 5 | RNVC: 2
SPSCM/PO/1342: RNCC: 6 | RNVC: 9

18 Jun 2010

5120-99-581-0751
Main Rotor Ang Tool

995810751
EA6705G547-041: RNCC: 3 | RNVC: 2
1MEVGE0: RNCC: 6 | RNVC: 9

10 Apr 2004

5120-99-120-9875
Bli Riveter Mandrel

991209875
27G 11: RNCC: 3 | RNVC: 2
27G 11: RNCC: 5 | RNVC: 2
7161-6003: RNCC: 5 | RNVC: 2
7161-6003: RNCC: 5 | RNVC: 2
1C7847: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-8260
Lower V Pin Spanner

994238260
NO PRIMARY REF 99-423-8260: RNCC: 3 | RNVC: 2
9032-73: RNCC: 5 | RNVC: 2
558900: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-835-5681
Ratchet Wrench Set

998355681
4-89-907: RNCC: 3 | RNVC: 2
89-907: RNCC: 5 | RNVC: 2
STA489907: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-195-9349
Co Crimping Die Set

991959349
N14TCHT-1: RNCC: 3 | RNVC: 2
N71365-99: RNCC: 5 | RNVC: 2
1C7825: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-3837
Mechanical Puller

996073837
HC25619: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-8286
Spanner Wrench

991368286
BW4609-8: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-648-7767
Contact Positioner

996487767
494-8-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-786-2785
Clamp Clinometer

997862785
NER968: RNCC: 3 | RNVC: 2

26 Mar 1985

5120-99-707-2579
Open End Wrench

997072579
DB100641: RNCC: 3 | RNVC: 2
UWS4N: RNCC: 6 | RNVC: 9

6 Aug 2004

5120-99-788-8638
Electronic Equipment Alignment Tool

997888638
NKH184: RNCC: 3 | RNVC: 2
876AK7540: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-308-1741

5120-99-542-0407
Wrench Spanner

995420407
VG6353PTB: RNCC: 3 | RNVC: 2
129316: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-731-2177
Brake Apply Adaptor

997312177
FV2090069: RNCC: 3 | RNVC: 2
AT61123: RNCC: 5 | RNVC: 2

9 May 1986

5120-99-740-2932
Pin Holding Spanner

997402932
VR2010: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-739-3326
Pliers

997393326
7490DS: RNCC: 3 | RNVC: 2
7490AS: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-923-8106
Weat Insertion Hook

999238106
A5053: RNCC: 3 | RNVC: 2
0276-276046: RNCC: 6 | RNVC: 9
0276-923-8106: RNCC: 6 | RNVC: 9
1C6535: RNCC: 6 | RNVC: 9
A5053: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-297-6140
Wrench

992976140
NO PRIMARY REF 99-297-6140: RNCC: 3 | RNVC: 2
NO.600-23M-50M: RNCC: 5 | RNVC: 2
C579-LWR010386: RNCC: 5 | RNVC: 2

15 Jun 2001

5120-99-441-4035
Replacer

994414035
12-005: RNCC: 3 | RNVC: 2

8 Sep 1992

5120-99-238-9302
Open End Wrench

992389302
TA194: RNCC: 3 | RNVC: 2
P2065-DG-468: RNCC: 5 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

1 Feb 2008

5120-99-234-4180
Extension Tool

992344180
WG1369-7101-041W093F: RNCC: 3 | RNVC: 2

14 Sep 1995

5120-99-681-6022
Socket Wrench Socket Set

996816022
NO PRIMARY REF 99-681-6022: RNCC: 3 | RNVC: 2
KEN-582-7900K: RNCC: 5 | RNVC: 2
KEN-582-7900K: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-454-1545
Lathe Chuck Key

994541545
NO PRIMARY REF 99-454-1545: RNCC: 3 | RNVC: 2
W4WD05136: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-910-7830
Swivel Knob Jeweler's Screwdriver

999107830
H4593: RNCC: 3 | RNVC: 2
26796/10: RNCC: 6 | RNVC: 9
FA19426: RNCC: 6 | RNVC: 9
H4593: RNCC: 6 | RNVC: 9
1J179: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-3573
Torque Tool Assembl

991373573
NO PRIMARY REF 99-137-3573: RNCC: 3 | RNVC: 2
B615637: RNCC: 5 | RNVC: 2
B615637: RNCC: 5 | RNVC: 2

27 Nov 1978

5120-99-432-7674

5120-99-606-9134

5120-99-780-3847

5120-99-558-8325
Box Wrench

5120-99-203-8337
Pt Shaft Restrainer

5120-99-770-2896

5120-99-734-8383
Socket Head Screw Key

997348383
Z03433 APPENDIX B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-753-9747
Mainshaft Orifice I

997539747
J24217: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-492-9060
Spanner

994929060
NO PRIMARY REF 99-492-9060: RNCC: 3 | RNVC: 2
55632: RNCC: 5 | RNVC: 2

9 Jun 2004

5120-99-458-9455
Spanner

994589455
NO PRIMARY REF 99-458-9455: RNCC: 3 | RNVC: 2
0249-5971: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-716-0765
Face Spanner Wrench Socket

997160765
S1670-10452: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-146-8158
Torque Wrench

991468158
EA2205G010-001: RNCC: 3 | RNVC: 2
B10960: RNCC: 5 | RNVC: 2

28 Jan 2000

5120-99-351-4237
Socket Wrench Handle

993514237
SEN-582-6400K: RNCC: 3 | RNVC: 2
PN00003217: RNCC: 5 | RNVC: 2

13 Mar 2008

5120-99-782-7741
Torque Wrench Adapter

997827741
H23039: RNCC: 1 | RNVC: 2
E33-8M: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-780-6588
Socket Head Screw Crowfoot Wrench Attachment

997806588
C62892: RNCC: 3 | RNVC: 2
043EK-002: RNCC: 6 | RNVC: 9

6 Oct 2004

5120-99-762-5979
Nose Tip

997625979
7165-0702: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-139-5536
Socket Head Screw Key

991395536
564-6MM A/F: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-659-6817
Face Spanner Wrench Socket

996596817
48585A17-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-422-2042
Bearing And Bushing Inserter And Remover

994222042
EA6305G630-041: RNCC: 3 | RNVC: 2

26 Nov 1999

5120-99-151-4507
Mechanical Puller Attachment

991514507
EA6305G676-101: RNCC: 3 | RNVC: 2

7 Nov 2009

5120-99-206-1203

5120-99-761-3717
Socket Wrench Handle

997613717
P461S1623: RNCC: 3 | RNVC: 2
H727-460320: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-192-9832
Wrench Spanner

5120-99-393-4336
Slotted Nut Spanner

993934336
17229041-0: RNCC: 3 | RNVC: 2
17229041-0: RNCC: 5 | RNVC: 2
021JB-024: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-209-9547

5120-99-977-7092
Torque Wrench

999777092
79-203: RNCC: 3 | RNVC: 2
1H1127: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-151-5950

5120-99-432-8866

5120-99-010-9561
C Clamp

990109561
900MR170: RNCC: 3 | RNVC: 2

23 Jul 1998

5120-99-950-8264
Drive F Round Sling

5120-99-776-3508
Open End Wrench

5120-99-828-3316

5120-99-627-7207
Sliding Bar

996277207
TM5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-745-4284

5120-99-738-1735

5120-99-821-8182
Mechanical Pul Bolt

998218182
NO PRIMARY REF 99-821-8182: RNCC: 3 | RNVC: 2
12439: RNCC: 5 | RNVC: 9
LV8REVT12439: RNCC: 6 | RNVC: 9
8REVT12439: RNCC: 6 | RNVC: 9

7 Aug 1984

5120-99-557-1332
Doub Wrench Spanner

995571332
Z780V001A04: RNCC: 3 | RNVC: 2
A90162: RNCC: 5 | RNVC: 2
353-351728: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-797-6740
Socket Wrench Socket

997976740
CHA748-297: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-127-8034
Torque Wrench

991278034
76-149: RNCC: 3 | RNVC: 2
DEFSTAN 51-11 PART 32: RNCC: 4 | RNVC: 1
1H520: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-924-5790
Socket Wrench Handle

999245790
85-25-19-10-1023: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-772-6977
Lock Ring Key

997726977
555591-81: RNCC: 3 | RNVC: 2
519226: RNCC: 5 | RNVC: 1
519226-80: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-5450
Wrench Spanner

991385450
S64-7147: RNCC: 3 | RNVC: 2
67P00001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-994-6081
Ground Rod Driver

999946081
SAP 25963198: RNCC: 3 | RNVC: 2
HT2804 REF. C2 9322: RNCC: 5 | RNVC: 2
EGRD58: RNCC: 5 | RNVC: 2
25963198: RNCC: 5 | RNVC: 2
158500: RNCC: 5 | RNVC: 2
1314M-001: RNCC: 6 | RNVC: 9

4 Mar 2011

5120-99-470-3193

5120-99-606-5572

5120-99-436-5033
Drill Chuck Key

994365033
3B2638: RNCC: 3 | RNVC: 2
3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-834-8306

5120-99-627-3823
Pulling Head

996273823
H615B5U: RNCC: 3 | RNVC: 2
H615B5U: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-617-5830
Mechanical Puller

996175830
HU24609: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-459-0648
Dogging Plate

994590648
HW28209: RNCC: 3 | RNVC: 2
64VV1944: RNCC: 6 | RNVC: 9

7 Nov 1979

5120-99-747-5611
Spanner

997475611
1756T405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-741-3356
Face Spanner Wrench Socket

997413356
J84477: RNCC: 3 | RNVC: 2

23 Oct 2009

5120-99-252-7425
Hoisting Link

992527425
GA5066: RNCC: 3 | RNVC: 2
GA5066: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-750-5573
Specia Governor Rod

997505573
PC7377: RNCC: 3 | RNVC: 2
PC7377: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-3957
Fixed Open End Wrench Set

991203957
TK0760W: RNCC: 3 | RNVC: 2
BS1842 TABLE 1: RNCC: 4 | RNVC: 1
H20245: RNCC: 5 | RNVC: 2
SCHEDULE S0055: RNCC: 5 | RNVC: 2
FA17177: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-663-9581
Socket Head Screw Key

996639581
BMLC106A: RNCC: 3 | RNVC: 2
BMLL106A: RNCC: 5 | RNVC: 9

22 Mar 2001

5120-99-651-6965
Mechanical Puller

996516965
NO PRIMARY REF 99-651-6965: RNCC: 3 | RNVC: 2
01TC11990: RNCC: 5 | RNVC: 2
01TC11990: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-479-5932
Hexagon Bit

994795932
030160: RNCC: 3 | RNVC: 2
042B6-004: RNCC: 6 | RNVC: 9

17 Jul 2004

5120-99-732-0437
Slide Hamme Adaptor

997320437
GA5100-10: RNCC: 3 | RNVC: 2
21825859: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-314-5732
Mechanical Puller Adapter

993145732
1P-1836: RNCC: 3 | RNVC: 2

15 Oct 2008

5120-99-725-9914
Bearing Extractor

5120-99-910-5848
Swivel Knob Jeweler's Screwdriver Set

999105848
H2269: RNCC: 3 | RNVC: 2
H20163: RNCC: 5 | RNVC: 2
SCHEDULE S0128: RNCC: 5 | RNVC: 2
640-4-14100: RNCC: 6 | RNVC: 9
FA16780: RNCC: 6 | RNVC: 9
910-5848: RNCC: 6 | RNVC: 9
1C3190: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-495-9907
Integrate Extractor

994959907
NO PRIMARY REF 99-495-9907: RNCC: 3 | RNVC: 2
424-030: RNCC: 5 | RNVC: 2

30 May 1992

5120-99-970-9662
Box Wrench

999709662
80-05-44-0447: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-986-6549
Special Pipe Seal

999866549
17229033-0: RNCC: 3 | RNVC: 2
17229033-0: RNCC: 5 | RNVC: 2
021JB-038: RNCC: 6 | RNVC: 9

23 May 2002

5120-99-977-3214
Torque Wrench Adapter

999773214
MHTP-5: RNCC: 3 | RNVC: 2
1C/8609: RNCC: 6 | RNVC: 9
MHTP-5: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-161-6191
Hand Shovel

991616191
02 9028: RNCC: 2 | RNVC: 2
029028: RNCC: 5 | RNVC: 2

24 Jan 2005

5120-99-617-7422
Bearing And Bushing Driver

996177422
AE6607: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-425-4463

5120-99-738-9178
Open End Wrench

997389178
3-100-198: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-469-8672

5120-99-418-4852
Bearing Pusher

5120-99-458-1844

5120-99-520-2964

5120-99-461-5255

5120-99-435-7489
Spanner Wrench

5120-99-402-0695

5120-99-708-7198
Rigging Tool

997087198
WG1588-0039-041: RNCC: 3 | RNVC: 2

23 Mar 2013

5120-99-146-2823
Sleeve Puller

991462823
S6170-65010: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-548-0855
Torque Wrench Adapter

995480855
UX11749A: RNCC: 3 | RNVC: 2
734-352055: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-532-5034
Compression P Guide

995325034
YJ70069: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-766-3362
Special Spanner

997663362
100599-3500-050: RNCC: 3 | RNVC: 2
03257-073: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-803-0217
Double Box Spanner

998030217
NO PRIMARY REF 99-803-0217: RNCC: 3 | RNVC: 2
LV6MT2-22109: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-966-6098
Remove And Ins Tool

999666098
EB6505G505-101: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-866-9584
Final Removal Tool

998669584
NO PRIMARY REF 99-866-9584: RNCC: 3 | RNVC: 2
FV485641: RNCC: 5 | RNVC: 2
9ACRFV485641: RNCC: 6 | RNVC: 9

24 May 1977

5120-99-861-3065
Seal Inserter

998613065
70-99-9052: RNCC: 3 | RNVC: 2

28 Oct 2009

5120-99-945-2612
Wing Alignment Tool

999452612
NO PRIMARY REF 99-945-2612: RNCC: 3 | RNVC: 2
80-05-44-1045: RNCC: 5 | RNVC: 2

19 Oct 1978

5120-99-667-7095
Leveling-Support Jack

996677095
TW902-010-17-00: RNCC: 3 | RNVC: 2
102JU-019: RNCC: 6 | RNVC: 9

3 Sep 2010

5120-99-605-8765
Torque Wrench Adapter

996058765
S2772: RNCC: 3 | RNVC: 2
C.WILLACY: RNCC: 6 | RNVC: 9

10 Jun 2002

5120-99-453-7410
Spanner

5120-99-561-8300
Open End Wrench

995618300
DE1396: RNCC: 3 | RNVC: 2
390-015432: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-4590
Forward Pin Spanner

994234590
NO PRIMARY REF 99-423-4590: RNCC: 3 | RNVC: 2
9032-132: RNCC: 5 | RNVC: 2
558509: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-721-2331
Bearing And Bushing Inserter And Remover

997212331
A.8461-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-738-3899
Wrench

997383899
TL508992: RNCC: 3 | RNVC: 2
85-690-2757: RNCC: 6 | RNVC: 9

29 Jun 1995

5120-99-539-9895
Torque Wrench

995399895
100147-8950: RNCC: 3 | RNVC: 2
TS80R: RNCC: 5 | RNVC: 1
100147-9000-068: RNCC: 5 | RNVC: 1
4287-003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-943-8609
Sleeve Stretching Pliers

999438609
TYPE SS: RNCC: 3 | RNVC: 2
H20363: RNCC: 5 | RNVC: 2
H5619: RNCC: 6 | RNVC: 9
LDN27369: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H5619: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-8207
Socket Wrench

994238207
9028-37: RNCC: 3 | RNVC: 2
558067: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-203-6383
Lapping Tool

992036383
CSDE/CHK/GSS/249: RNCC: 3 | RNVC: 2

22 Mar 1996

5120-99-291-1210
Plate

992911210
S3S17420000: RNCC: 3 | RNVC: 2
98PJ01-751: RNCC: 6 | RNVC: 9

8 Jul 1999

5120-99-051-6950
Drill Guide

990516950
D 0.1285: RNCC: 3 | RNVC: 2
D.1285: RNCC: 5 | RNVC: 2
3AP5187: RNCC: 6 | RNVC: 9

6 Aug 1993

5120-99-448-4272
Bush Removal Tool

994484272
NO PRIMARY REF 99-448-4272: RNCC: 3 | RNVC: 2
UL13320: RNCC: 5 | RNVC: 2
88633-616-751: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-333-5051
Seal Inserter

993335051
EA6305G549-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-306-2699
Reve Ratchet Wrench

993062699
335: RNCC: 3 | RNVC: 1
335 TYPE D 40 MM SQ: RNCC: 5 | RNVC: 2

23 Aug 1991

5120-99-714-9012
Socket Wrench H Bar

5120-99-105-0193
Piston R Compressor

5120-99-462-6217

5120-99-148-3237

5120-99-606-5666
Turning Unit

5120-99-610-6923
Screw Thre Inserter

5120-99-611-1619
Socket Wrenc Socket

Load More Results