What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 83 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 83 of 108

5120-99-548-0558
Slotted Wrench

995480558
NO PRIMARY REF 99-548-0558: RNCC: 3 | RNVC: 2
UX11758A: RNCC: 5 | RNVC: 2
734-352058: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-545-3344
Socket Wrench Extension

995453344
900215-9962: RNCC: 3 | RNVC: 2
NJT534: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9
99-629-8695: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-200-4390
Earth Rammer

992004390
NO PRIMARY REF 99-200-4390: RNCC: 3 | RNVC: 2
UKD1SPR0V2173: RNCC: 5 | RNVC: 2

31 Jan 1980

5120-99-666-3873
Box Wrench

996663873
KB132K1121-000: RNCC: 3 | RNVC: 2

5 Apr 2005

5120-99-137-4219

5120-99-142-0588

5120-99-759-6451

5120-99-759-1112
Reamer Adaptor

996271020
GGGK00275: RNCC: 3 | RNVC: 2
11CC1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-257-9688
Hub Cap Spanner

992579688
880507: RNCC: 3 | RNVC: 2
FJ961360002: RNCC: 6 | RNVC: 9

8 Feb 1996

5120-99-138-0536

5120-99-630-8366
Mechanical Puller

996308366
MVEE39083A3: RNCC: 3 | RNVC: 2
NTS15038: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-212-1983
Crowfoot Wrench

992121983
T14485: RNCC: 3 | RNVC: 2
000NJ-005: RNCC: 6 | RNVC: 9

31 Mar 2000

5120-99-563-2229
Open End Wrench

995632229
DAE7663: RNCC: 3 | RNVC: 2
DAE7663GSE: RNCC: 5 | RNVC: 2

12 Aug 1999

5120-99-815-7073
Pin Inserter

998157073
3137T000: RNCC: 3 | RNVC: 2

16 Feb 2000

5120-99-910-4446
Driftpin

999104446
H629: RNCC: 4 | RNVC: 1
910-4446: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5520
Hand Lead Seal Press

999105520
BS3087-PART 10: RNCC: 4 | RNVC: 1
DEFSTAN51-10: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
H1844: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-378-4611
Spanner Wrench

993784611
AMP-00-06-01055: RNCC: 3 | RNVC: 2

6 Feb 2007

5120-99-122-8868
Hand Terminal Crimping Tool

991228868
MK3/2ATF: RNCC: 3 | RNVC: 2
303690C: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-729-4849

5120-99-301-5094
Electronic Component Inserter And Remover

993015094
505BG-CP: RNCC: 3 | RNVC: 2
505BG-CP: RNCC: 5 | RNVC: 2

13 Dec 1995

5120-99-469-3645
Open End Wrench

994693645
AE0600: RNCC: 3 | RNVC: 2
27M11957: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-713-9850
Mechanical Puller

997139850
Z10215: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-8796
Screwdriver Bit

991208796
H6313: RNCC: 2 | RNVC: 2
1C7812: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-371-0762
Roller Restrai Tool

993710762
AS 72702: RNCC: 3 | RNVC: 2
FH9802E0002: RNCC: 6 | RNVC: 9

18 Mar 1998

5120-99-721-4476
Pot Wrench

5120-99-546-9216
Key Withdrawal Tool

5120-99-810-6869

5120-99-801-9288
Mechanical Puller Attachment

998019288
1049/82.22: RNCC: 3 | RNVC: 2
M323929: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-799-5734
Swivel Knob Jeweler's Screwdriver

997995734
777C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-763-9208
Flatpoi Screwdriver

5120-99-130-0271

5120-99-130-1919

5120-99-974-1691
Torque Wrench

999741691
011019: RNCC: 3 | RNVC: 1
TSN25A + 031340: RNCC: 5 | RNVC: 1

14 Feb 2007

5120-99-910-6335
Socket Wrench Handle

999106335
BS4006-TABLE 26 20MM: RNCC: 4 | RNVC: 1
H20017: RNCC: 5 | RNVC: 2
MOL V509.0002.6: RNCC: 6 | RNVC: 9
H4434: RNCC: 6 | RNVC: 9
FA: RNCC: 6 | RNVC: 9
1L63: RNCC: 6 | RNVC: 9
F1FA17376: RNCC: 6 | RNVC: 9
0277: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-803-2110
Fixing Tool

998032110
NO PRIMARY REF 99-803-2110: RNCC: 3 | RNVC: 2
336-804: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-548-0739
Torque Wrench

995480739
B7: RNCC: 3 | RNVC: 1
734-352189: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-968-5641
Torque Tubes Gauge

999685641
STD/00055482: RNCC: 3 | RNVC: 2
14988585: RNCC: 5 | RNVC: 2
A47024: RNCC: 5 | RNVC: 2

12 Feb 2009

5120-99-465-4000
Angle Bracket

994654000
NO PRIMARY REF 99-465-4000: RNCC: 3 | RNVC: 2
1A4284: RNCC: 5 | RNVC: 2

18 Jan 1977

5120-99-117-4541
Damper Ring Remover

991174541
EA6505G512-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-146-2923
Bea Installing Tool

991462923
S6170-35407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-305-3606
Tool

993053606
ME00171-025-24H-1161: RNCC: 3 | RNVC: 2

5 Nov 1996

5120-99-441-0008
Socket Wrench Socket

994410008
NMT-177: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-99-468-5113
Tool Clamp

994685113
NO PRIMARY REF 99-468-5113: RNCC: 3 | RNVC: 2
10AG1526: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-130-2589
Mounting Tube

991302589
NO PRIMARY REF 99-130-2589: RNCC: 3 | RNVC: 2
217-22-00: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-835-8210
Mechanical Jack Handle

998358210
389C: RNCC: 3 | RNVC: 2
6621: RNCC: 5 | RNVC: 2
103A/1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-133-7193
Crowfoot Spanner

991337193
FRH280: RNCC: 3 | RNVC: 2
0625P-229: RNCC: 6 | RNVC: 9
062CE-100: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-301-9464
Single Ende Spanner

993019464
S0146-82: RNCC: 3 | RNVC: 2

9 Jun 1997

5120-99-586-0887
Face Spanner Wrench Socket

995860887
SGE3210-1600: RNCC: 3 | RNVC: 2

29 May 2012

5120-99-512-1213
Seal Housin Remover

995121213
EA6305G562-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-136-5907
Retainin Applicator

991365907
NO PRIMARY REF 99-136-5907: RNCC: 3 | RNVC: 2
11-454-19-10-1765: RNCC: 5 | RNVC: 2
9BSTRA1GHT: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-2456
Combination Box And Open End Wrench

991242456
3887/3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-9253
Hand Terminal Crimping Tool

991369253
B47907: RNCC: 3 | RNVC: 2
27J30002: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-687-2426
Clasp Kit

996872426
MRPC2099: RNCC: 3 | RNVC: 2

23 Jan 2008

5120-99-216-9291
Seal Remover

992169291
CBD12866G01: RNCC: 3 | RNVC: 2

21 Dec 2001

5120-99-139-8691
Screwdriver Bit

991398691
277830: RNCC: 3 | RNVC: 2
420277830: RNCC: 5 | RNVC: 2
84770148: RNCC: 5 | RNVC: 2
277-830: RNCC: 5 | RNVC: 2
420277830: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-151-5456
Forming Ring Seal

991515456
MC1269101: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-798-4555
Wire Insertion Tool

5120-99-794-7687
Screwdriver Bit Ass

5120-99-115-4981

5120-99-120-9881

5120-99-116-2745

5120-99-116-2743
Removal Tool Bit

5120-99-108-9171

5120-99-607-6610
Spanner Wrench

996076610
S3S13472000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-9874

5120-99-786-1328

5120-99-255-8785
Socket Wrench Screwdriver Attachment

992558785
MBEU58801: RNCC: 1 | RNVC: 2
FA10B: RNCC: 3 | RNVC: 2
58801: RNCC: 5 | RNVC: 2
MBEU58801: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-135-9711

5120-99-135-9139

5120-99-788-4816
Torque Wrench Adapter

997884816
2 1/8 IN. A/F BY 1 IN. SQ DRIVE-: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-770-6774
Forming Tool

5120-99-770-6780

5120-99-111-8135

5120-99-810-6772
Intermediate Block

5120-99-442-7449

5120-99-776-4940

5120-99-758-6035
Socket Head Scr Key

5120-99-467-6515
Holding Blocks

994676515
MT1026-15: RNCC: 3 | RNVC: 2
27Q34595: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-168-9565
Mechanical Puller

991689565
LRT-12-049: RNCC: 3 | RNVC: 2
LST.136: RNCC: 5 | RNVC: 9

18 Aug 1995

5120-99-614-8706
Bearing And Bushing Remover

996148706
H39017A5/D: RNCC: 3 | RNVC: 2
H39017A5: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-244-4790
Socket Wrench Crowfoot Attachment

992444790
MTE 0254-05: RNCC: 3 | RNVC: 2
251/05: RNCC: 5 | RNVC: 2
175/05 SCALE 03377-16/5/91: RNCC: 6 | RNVC: 9

20 Sep 1991

5120-99-145-0984
Mechanical Puller

991450984
NO PRIMARY REF 99-145-0984: RNCC: 3 | RNVC: 2
AM24792: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-9799
Sock Wrench Key Bit

991209799
A33-375: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-437-5868
Sewing Palm

994375868
NO PRIMARY REF 99-437-5868: RNCC: 3 | RNVC: 2
FIG5953-91: RNCC: 5 | RNVC: 2
0275-2392: RNCC: 6 | RNVC: 9
C0342: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-553-5645
Six Point Tip Screwdriver

995535645
KEN-572-5272K: RNCC: 3 | RNVC: 2
CV163169: RNCC: 5 | RNVC: 2
G254TRN1: RNCC: 5 | RNVC: 2

31 Jan 2012

5120-99-745-5133
Socket Wrench Handle Bar

997455133
55437A2ITEM32: RNCC: 3 | RNVC: 2
55437A2-32: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-139-4292
Suction Tool

991394292
BF801: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-543-5535
Torque Wrench Adapter

995435535
S0E11-16: RNCC: 3 | RNVC: 9
S0E11-16: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-687-1631
Drive Spindle Tool

996871631
802482-00: RNCC: 3 | RNVC: 2
991D0C: RNCC: 6 | RNVC: 9
99PH01-476: RNCC: 6 | RNVC: 9

25 Aug 1999

5120-99-459-3635

5120-99-533-2555

5120-99-935-7604
Tire Iron

5120-99-513-3538
Spanner Wrench

995133538
MBJ31083-407: RNCC: 3 | RNVC: 2
B/MBJ31083-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-495-7127
Socket Wrench Socket

994957127
T2BG4960: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-825-7902
Removal-Replac Tool

998257902
NO PRIMARY REF 99-825-7902: RNCC: 3 | RNVC: 2
FV774670: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-715-9539
Removal Tool

997159539
S6170-35404-14: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-827-5910
Final Tube Assembly

998275910
NO PRIMARY REF 99-827-5910: RNCC: 3 | RNVC: 2
FV770062: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-817-0546
Crankshaf Extractor

998170546
NO PRIMARY REF 99-817-0546: RNCC: 3 | RNVC: 2
VR2099: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-3607
Screwdriver Bit

991383607
BS2559PT2PT5: RNCC: 3 | RNVC: 1
5033: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1

4 Sep 1980

5120-99-138-0550
Open End Wrench

991380550
NO PRIMARY REF 99-138-0550: RNCC: 3 | RNVC: 2
40-06-12-12: RNCC: 5 | RNVC: 2
1C8222: RNCC: 6 | RNVC: 9
12-12: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-4175
Metallic Sea Pliers

991354175
NO PRIMARY REF 99-135-4175: RNCC: 3 | RNVC: 2
SEALFASTCLOSINGPUNCHLIGHTPATTERN: RNCC: 5 | RNVC: 2
435726: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-836-0529
Clu Withdrawal Tool

998360529
NO PRIMARY REF 99-836-0529: RNCC: 3 | RNVC: 2
352-521: RNCC: 5 | RNVC: 9
LV7FW352-521: RNCC: 6 | RNVC: 9
16C3376: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-421-2331
Drill Guide

994212331
182/01468: RNCC: 3 | RNVC: 2
SM765A: RNCC: 6 | RNVC: 9

5 Dec 1996

5120-99-148-0306
Pliers

991480306
TL-502-240: RNCC: 3 | RNVC: 2

28 Nov 2007

5120-99-120-7169
Hand Hammer

991207169
712: RNCC: 3 | RNVC: 2
H20023: RNCC: 5 | RNVC: 2
5012936117122: RNCC: 5 | RNVC: 2
THOR712: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 31: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
H6007: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-756-8893
Buffer Removal Tool

997568893
T7247-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-645-1423
Seal Instalati Tool

996451423
WD0388-00331-103: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-747-2289
Tool Kit.Turbo Char

997472289
OD.29499: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-753-9775
Bushing Installer

997539775
J24794: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-755-3201
Socket Wrench Socket

997553201
24690: RNCC: 3 | RNVC: 2
DRAPER 24690: RNCC: 5 | RNVC: 2

12 Aug 2011

5120-99-436-5032
Drill Check Key

994365032
3B2636: RNCC: 3 | RNVC: 2
6869: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-821-8171

5120-99-798-5617

5120-99-869-3221
Nut Spinner

998693221
BS4006-TABLE 4 5MM: RNCC: 4 | RNVC: 1
TABLE 4: RNCC: 6 | RNVC: 9

25 May 1995

5120-99-001-5928
Remover And Adaptor

990015928
LRT-37-007: RNCC: 3 | RNVC: 2
LST550-2: RNCC: 5 | RNVC: 2

8 May 1992

5120-99-120-1263
Torque Wrench

991201263
DEFSTAN51-11 PART 32: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
H5762: RNCC: 6 | RNVC: 9
TABLE I(D): RNCC: 6 | RNVC: 9
0276-120-1263: RNCC: 6 | RNVC: 9
1C6855: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-212-6361
Terminal Crimping Tool Contact Positioner

992126361
GB105: RNCC: 3 | RNVC: 2
NPPOGAMA4B3/160903/CRIMP: RNCC: 6 | RNVC: 9

10 Dec 2003

5120-99-375-0250
Expansion Shield Setting Tool

993750250
00243752: RNCC: 3 | RNVC: 2
243752: RNCC: 5 | RNVC: 2
076LG-007: RNCC: 6 | RNVC: 9
HSD-M: RNCC: 6 | RNVC: 9

17 Jan 2008

5120-99-792-8169
Swivel Knob Jeweler's Screwdriver

997928169
777F: RNCC: 3 | RNVC: 2

22 Mar 1988

5120-99-987-5786
Socket Wrench Socket Set

999875786
T2BJ3032: RNCC: 3 | RNVC: 2

21 Sep 2006

5120-99-790-2313
Spanner Wrench

997902313
HU20606: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-788-6770
Spanner Wrench

997886770
460009621C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-783-1597
Socket Sp Extension

997831597
1702313: RNCC: 3 | RNVC: 2
1702313: RNCC: 5 | RNVC: 2

27 Jun 1986

5120-99-801-8755
Spanner Wrench

998018755
FV 473179: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-796-1498
De-Tabbing Tool

997961498
PE58285: RNCC: 3 | RNVC: 2
PE58285: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-802-1935
Socket Wrench

998021935
FV 602610: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-802-2471
Oil Seal Replacer

998022471
CK2659: RNCC: 3 | RNVC: 2
FV453177: RNCC: 3 | RNVC: 2
T642: RNCC: 3 | RNVC: 2

5 Sep 1979

5120-99-792-2599
Socket Wrench Extension

997922599
NM210A: RNCC: 3 | RNVC: 2

16 May 2006

5120-99-798-1965
Marking Tool

997981965
E222: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-798-0238
Inertial Tool

997980238
733221: RNCC: 3 | RNVC: 2
733221: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-777-7008
Open End Wrench

997777008
2JM2022: RNCC: 3 | RNVC: 2
E600212: RNCC: 5 | RNVC: 2
600212: RNCC: 5 | RNVC: 2
BS192: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-791-7118
Socket Bar

997917118
FV472873: RNCC: 3 | RNVC: 2

28 Feb 1985

5120-99-782-2097
Wrench Key

997822097
W4: RNCC: 3 | RNVC: 2
H01174: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-782-2102
Pliers

997822102
3132P: RNCC: 3 | RNVC: 2
H01970: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-810-3672
Bush Remover

998103672
MF263: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-792-0956
Face Spanner Wrench Socket

997920956
PE 57008: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-801-8766
Spanner Wrench

998018766
FV 590198: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-809-0990
Mechanical Puller

998090990
Y3J70908: RNCC: 3 | RNVC: 2

4 Sep 1996

5120-99-753-9760
Centre Suppo Lifter

997539760
J24455: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-724-8042
Seal Inserter

997248042
S1615: RNCC: 3 | RNVC: 2

24 Jul 2007

5120-99-527-2308
Cont Insertion Tool

5120-99-715-0057
Socket Wrench Socket

997150057
EB1187: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-668-3285
Telescoping Pole

996683285
HEFIS120: RNCC: 3 | RNVC: 2

30 Jan 2012

5120-99-829-8583

5120-99-815-1851

5120-99-830-9416

5120-99-799-7866
Inserting Handle

5120-99-528-5704

5120-99-551-7920
Electrical Contact Inserter And Remover

995517920
13027/2: RNCC: 3 | RNVC: 2

21 Jan 2010

5120-99-127-9627
Double Poin Scriber

991279627
NO PRIMARY REF 99-127-9627: RNCC: 3 | RNVC: 2
R18: RNCC: 5 | RNVC: 2
1B5307: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-200-3620

5120-99-546-9224
Extractor Tool Bolt

5120-99-114-6785

5120-99-112-4772

5120-99-534-6422
Ratchet Wrench

995346422
04-7131: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-9469
Hand Screw Jack

5120-99-760-4997

5120-99-720-4974
Spanner Wrench

997204974
A2-83097: RNCC: 3 | RNVC: 2
83097: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-376-9425
Centring Device

993769425
NO PRIMARY REF 99-376-9425: RNCC: 3 | RNVC: 2
90412: RNCC: 5 | RNVC: 2
CV177139: RNCC: 5 | RNVC: 2

1 Apr 2011

5120-99-449-1128
Spanner

994491128
NO PRIMARY REF 99-449-1128: RNCC: 3 | RNVC: 2
9900-139: RNCC: 5 | RNVC: 2
88102-103-988: RNCC: 6 | RNVC: 9

31 Jan 1977

5120-99-742-4127
Extractor

997424127
PJ.1223033: RNCC: 3 | RNVC: 2
0625P-135: RNCC: 6 | RNVC: 9
062KT-121: RNCC: 6 | RNVC: 9

25 May 2006

5120-99-434-7204
Screw Extractor

994347204
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
F1FA13173: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-301-0788
Drift

993010788
453 7785-107: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-507-2219
Socket Wrench

995072219
NO PRIMARY REF 99-507-2219: RNCC: 3 | RNVC: 2
4734M: RNCC: 5 | RNVC: 1
281-645: RNCC: 5 | RNVC: 2
T4734M 055: RNCC: 5 | RNVC: 2

8 Oct 1999

5120-99-152-0941
Screwdriver Bit Set

991520941
NO PRIMARY REF 99-152-0941: RNCC: 3 | RNVC: 2
262-0331: RNCC: 5 | RNVC: 2

28 Apr 2011

5120-99-714-3380
Wrench Extension

997143380
NO PRIMARY REF 99-714-3380: RNCC: 3 | RNVC: 2
PC5224: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-144-6044
Special Hold Block

991446044
NO PRIMARY REF 99-144-6044: RNCC: 3 | RNVC: 2
460002090-4: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-733-5857
Socket Wrench Handle Bar

997335857
ME02042/358/24H71: RNCC: 3 | RNVC: 2
ME02042-358-24H71: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-365-4298
Socket Wrench Handle Bar

993654298
202-037047: RNCC: 3 | RNVC: 2
SKAEWMK7/ILS/100-2A: RNCC: 6 | RNVC: 9

16 May 2001

5120-99-866-2684
Puller Body

998662684
EA6605G505-111: RNCC: 3 | RNVC: 2
1MEVGKK: RNCC: 6 | RNVC: 9

17 Apr 2004

5120-99-468-8387
Hook Spanner

994688387
RS181-11: RNCC: 3 | RNVC: 2
27Y3565: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-111-2865
Anvil

991112865
J600/2/1032: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-411-9013
Tubular Key Spanner

994119013
NO PRIMARY REF 99-411-9013: RNCC: 3 | RNVC: 2
ST1874: RNCC: 5 | RNVC: 9
27Q13886: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-254-4354
Nose Tip

992544354
7162-0316: RNCC: 3 | RNVC: 2
1C-8717: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-3648
Main Bear Extractor

991363648
NO PRIMARY REF 99-136-3648: RNCC: 3 | RNVC: 2
YJ70040: RNCC: 5 | RNVC: 2
678-280064: RNCC: 6 | RNVC: 9

7 Nov 1978

5120-99-124-3907
Open End Wrench

991243907
0SA1 3-41NAF: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-869-4614
Inserting Tool

998694614
0661-812-53: RNCC: 3 | RNVC: 2

27 Apr 1996

5120-99-773-6910
Spanner Wrench

997736910
73800: RNCC: 3 | RNVC: 2
31317-0166: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-640-1435
Spanner Wrench

996401435
K2523: RNCC: 3 | RNVC: 2
6D163: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-3447
Torque Span Adaptor

991503447
A0116319: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-914-2653

5120-99-910-4384

5120-99-910-7940
Moulders Trowel

5120-99-127-6441
Hand Blind Riveter

991276441
7180-0008: RNCC: 3 | RNVC: 2
AHJ0F249: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-793-8369
Socket Head Scr Key

5120-99-779-8849

5120-99-781-9269
Sp Compressing Tool

5120-99-756-5907
Box Spanner

5120-99-122-4815
Socket Wrench Crowfoot Attachment

991224815
KAN807: RNCC: 3 | RNVC: 2
1L551: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-560-0277
Open End Wrench

995600277
00-03-848030: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-8282
Spanner Wrench

991368282
BW4609-19: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-791-2730
Torque Wrench

997912730
904812-0134-000: RNCC: 3 | RNVC: 2
86084: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-599-0859
Alignment Tool

995990859
NO PRIMARY REF 99-599-0859: RNCC: 3 | RNVC: 2
64AD6074012: RNCC: 5 | RNVC: 2

13 Aug 2005

5120-99-127-8037
Torque Wrench

991278037
76-148: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT32: RNCC: 4 | RNVC: 1
1H519: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-212-5976
Hand Hydraulic Jack

992125976
T90804: RNCC: 3 | RNVC: 2
302-043574: RNCC: 5 | RNVC: 2
B845: RNCC: 5 | RNVC: 2

25 Jul 2003

5120-99-760-6712
Socket Wrench Socket

997606712
48415-A74/405: RNCC: 3 | RNVC: 2
48415A74-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-132-5348
Hydraulic Jack Handle

991325348
MNBJ35M-3: RNCC: 3 | RNVC: 2

5 Jun 2003

5120-99-008-0887
Fastener

990080887
SEL-1/8: RNCC: 3 | RNVC: 2
SEL1-8: RNCC: 5 | RNVC: 2

6 Jan 1995

5120-99-853-3456
Spanner Wrench

998533456
ASK1680: RNCC: 3 | RNVC: 2

10 Oct 1994

5120-99-957-1752
Locki Crimping Tool

999571752
UY8309: RNCC: 3 | RNVC: 2

1 Sep 1993

5120-99-108-9861
Spanner And Extract

991089861
TL3079: RNCC: 3 | RNVC: 2
TL3079: RNCC: 3 | RNVC: 2
25M21574: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-676-4439
Nose Wheel Inn Tool

996764439
SAO10436: RNCC: 3 | RNVC: 2
SAO 10436: RNCC: 6 | RNVC: 9

4 Mar 2002

5120-99-814-1576
Seal Inserter

998141576
MC1248554: RNCC: 3 | RNVC: 2

31 Jan 2011

5120-99-778-3369
Combination Open End And Spanner Wrench

997783369
C55894: RNCC: 3 | RNVC: 2
MRI 315566: RNCC: 5 | RNVC: 1
MRI 310ST: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-167-5352
Pipe Seal

991675352
MC1269103: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-459-1838

5120-99-459-0765

5120-99-419-5358

5120-99-588-1437
Special Tools A Set

995881437
3730377C91: RNCC: 3 | RNVC: 2

26 Jan 2011

5120-99-503-9026
Cross Piece

995039026
EA6305G676-105: RNCC: 3 | RNVC: 2

7 Nov 2009

5120-99-761-8197
Draw Bar

997618197
CH749-147: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-557-2339

5120-99-617-2974
Torque Wrench

996172974
011019: RNCC: 3 | RNVC: 1
TSN 25A: RNCC: 5 | RNVC: 1
MGWS42A: RNCC: 6 | RNVC: 9

17 Jul 2008

5120-99-902-1721
Craftsmans Tweezers

5120-99-124-0487
Strap Clamping Tool

991240487
C001: RNCC: 3 | RNVC: 2
TT001: RNCC: 3 | RNVC: 2
C001: RNCC: 3 | RNVC: 2
D5781: RNCC: 3 | RNVC: 2
D6966: RNCC: 5 | RNVC: 2
BANDIT C001: RNCC: 5 | RNVC: 2
C001: RNCC: 5 | RNVC: 2
9162 Y 440: RNCC: 5 | RNVC: 2
4K4040: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-811-4619
Mechanical Puller

998114619
NO PRIMARY REF 99-811-4619: RNCC: 3 | RNVC: 2
Z8380: RNCC: 5 | RNVC: 2
Z8380: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-560-1769
Open End Wrench

995601769
2J148167: RNCC: 3 | RNVC: 2
T2AB2155: RNCC: 5 | RNVC: 2
40-73-44-48: RNCC: 5 | RNVC: 2
DC2426: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-374-5836
Seal Inserter

993745836
NO PRIMARY REF 99-374-5836: RNCC: 3 | RNVC: 2
90890-04078YM-33221: RNCC: 5 | RNVC: 2

7 Mar 2008

5120-99-965-2382
Recuperator Setting Tool

999652382
FL18661: RNCC: 3 | RNVC: 2
M119NM35801: RNCC: 5 | RNVC: 2
NM35801: RNCC: 5 | RNVC: 2
R0FN14701-35: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-980-8562
Spanner Wrench

999808562
GWLBL-CH-248: RNCC: 3 | RNVC: 2
CH-248: RNCC: 6 | RNVC: 9
FL963NJ0004: RNCC: 6 | RNVC: 9

21 Jan 1997

5120-99-422-1439
Screwdriver

994221439
NO PRIMARY REF 99-422-1439: RNCC: 3 | RNVC: 2
272-1015: RNCC: 5 | RNVC: 2
0633-400507: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-420-3006
Guide Rod

994203006
460009172-1: RNCC: 3 | RNVC: 2

28 Aug 1991

5120-99-495-7231
Adjustable Wrench

994957231
211082: RNCC: 3 | RNVC: 2
701/20: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-560-5339
Nozzle Extractor

995605339
ANR88364: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-2306

5120-99-782-2326

5120-99-782-2321

5120-99-253-2326
Propeller Extractor

5120-99-314-5813
Drill Guide

993145813
D 0.1650: RNCC: 3 | RNVC: 2
D.165: RNCC: 5 | RNVC: 2
3AP5188: RNCC: 6 | RNVC: 9

10 Aug 1993

5120-99-282-3063
Removal-Insert Tool

992823063
312-AT-821: RNCC: 3 | RNVC: 2
1MEV5U4: RNCC: 6 | RNVC: 9

14 Jan 2000

5120-99-256-5712
Spanner And Extensi

992565712
904801-0740-000: RNCC: 3 | RNVC: 2
M98672: RNCC: 5 | RNVC: 2
47350-300: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-799-5930
Mechanical Puller

997995930
200887200-AFT-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-560-1335
Socket Wrench

995601335
TBA9: RNCC: 3 | RNVC: 2
F1G12962A: RNCC: 5 | RNVC: 1
04-6706-6: RNCC: 5 | RNVC: 2
BDC4264: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-3864
Screw Thread Insert Inserter

991383864
9863-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-670-4385
Mechanical Puller

996704385
NO PRIMARY REF 99-670-4385: RNCC: 3 | RNVC: 2
404-727: RNCC: 5 | RNVC: 2

10 Jan 1995

5120-99-844-4027
Hand Terminal Crimping Tool

998444027
DCTHX4-5001: RNCC: 3 | RNVC: 2
010B2-007: RNCC: 6 | RNVC: 9

21 Feb 2001

5120-99-454-7754
Transp Opening Tool

994547754
NO PRIMARY REF 99-454-7754: RNCC: 3 | RNVC: 2
MSSK11515-110: RNCC: 5 | RNVC: 2
721135: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-253-0755
Extractor

992530755
NO PRIMARY REF 99-253-0755: RNCC: 3 | RNVC: 2
64LL1473: RNCC: 5 | RNVC: 2

26 Jul 2005

5120-99-327-9642
Injector Assem Tool

993279642
EB001807: RNCC: 3 | RNVC: 2
75-733AC: RNCC: 5 | RNVC: 2

1 Jul 1997

5120-99-859-1834
An Replacer Remover

998591834
FV 3006418: RNCC: 3 | RNVC: 2
FJ961DH0004: RNCC: 6 | RNVC: 9

17 Aug 1996

5120-99-859-1138
Leak Ancillary Kit

998591138
36307J: RNCC: 3 | RNVC: 2
SP57835: RNCC: 5 | RNVC: 2

27 Aug 1991

5120-99-207-8932
Spring Retainer

992078932
GMB75976: RNCC: 3 | RNVC: 2
0EB1364: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-827-7590
Vehicle Liftin Jack

998277590
NO PRIMARY REF 99-827-7590: RNCC: 3 | RNVC: 2
71270329: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-423-8221
Socket Wrench

994238221
9028-38: RNCC: 3 | RNVC: 2
558262: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-147-8976
Face Spanner Wrench Socket

991478976
11036-1005-06: RNCC: 3 | RNVC: 2

30 Sep 2005

5120-99-423-4592
Pin Spanner

994234592
NO PRIMARY REF 99-423-4592: RNCC: 3 | RNVC: 2
9032-141: RNCC: 5 | RNVC: 2
558523: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-964-3490
Spanner Wrench

999643490
N0D2107-136: RNCC: 3 | RNVC: 2
121750: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-252-7420
Valve Sprin Adaptor

992527420
GA5000-3: RNCC: 3 | RNVC: 2
GA5000-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-335-1676
Mechanical Puller Attachment

993351676
S3S20007000: RNCC: 3 | RNVC: 2

8 Jul 2003

5120-99-806-7472

5120-99-835-2748

5120-99-831-9222

5120-99-750-5059
Inspection Mirror

997505059
VMBR/2: RNCC: 3 | RNVC: 2
ES441-R: RNCC: 5 | RNVC: 2
VMBR/2: RNCC: 5 | RNVC: 2

21 Oct 2002

5120-99-617-7002
Spanner Wrench

996177002
AE5501: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-799-5967
Mechanical Puller

997995967
200886201.AFT.4: RNCC: 3 | RNVC: 2
200886201.AFT.4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-710-4946
Screw Thread Insert Inserter

997104946
535-5: RNCC: 3 | RNVC: 2
85-119-19-10-1729: RNCC: 5 | RNVC: 2
PE3939: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
1C9113: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-881-4504
Plunger G Extractor

998814504
7044/428: RNCC: 3 | RNVC: 2
ET428: RNCC: 5 | RNVC: 2
Z7044/428: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-7959
Socket Head Screw Key

991387959
BS2470: RNCC: 4 | RNVC: 1
H21603: RNCC: 5 | RNVC: 2
TABLE 8 0.050A/F LONG SERIES: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-721-9349
Spacer

997219349
460009321-5: RNCC: 3 | RNVC: 2
460009321DETAIL5: RNCC: 6 | RNVC: 9

2 Sep 1989

5120-99-965-0811
Wrench Spanner

999650811
7341-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-659-6936
Mechanical Puller

996596936
48419A29/403: RNCC: 3 | RNVC: 2
48419A29-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-615-8945
C Clamp

996158945
MBEU117431: RNCC: 3 | RNVC: 2

11 May 2009

5120-99-547-4315

5120-99-469-0838

5120-99-401-2337

5120-99-607-3835
Screw Thread Insert Inserter

996073835
HC22943: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-625-4166
Pressure Extractor

996254166
3924-33400: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-797-6696
Extractor

997976696
CHA748-436: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-595-2533
Drill Guide

995952533
ALC524/2: RNCC: 3 | RNVC: 2
CV199608: RNCC: 5 | RNVC: 2

6 Mar 2013

5120-99-786-2481
Socket Wrench Socket

997862481
A.P.71002: RNCC: 3 | RNVC: 2
154017ST: RNCC: 5 | RNVC: 2

6 Apr 1993

5120-99-148-0439
Friction Igniter

991480439
RK330B: RNCC: 3 | RNVC: 2
RK330B: RNCC: 5 | RNVC: 2

28 Mar 2008

5120-99-782-4419
Rea Lead In Mandrel

997824419
VT13964: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-1177
Torque Wrench Adapter

997821177
H23043: RNCC: 1 | RNVC: 2
49A: RNCC: 3 | RNVC: 1
49A: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-808-2431
Socket Spanner

998082431
FV 667252: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-610-5145
Face Spanner Wrench Socket

996105145
PE55880: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-0958
Bearing And Bushing Driver

997600958
T7310-407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-891-0113
Seal Removal Tool

998910113
EA6305G655-041: RNCC: 3 | RNVC: 2
1MEV5CR: RNCC: 6 | RNVC: 9

26 Nov 1999

5120-99-432-4395
Short Pliers

994324395
11-56978: RNCC: 3 | RNVC: 2
11-56978: RNCC: 3 | RNVC: 2
88870-363-167: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-769-3551
Torque Wrench Adapter

997693551
T6777-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-547-0057
Torque Wrench

995470057
79-205: RNCC: 3 | RNVC: 2
3073-9000-093: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-4656
Hand Hammer

999104656
BS876: RNCC: 4 | RNVC: 1
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
H20651: RNCC: 5 | RNVC: 2
FA14136: RNCC: 6 | RNVC: 9
0274: RNCC: 6 | RNVC: 9
910-4656: RNCC: 6 | RNVC: 9
1B1362: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-131-9609
Torque Wrench

991319609
QDRIVER3: RNCC: 3 | RNVC: 2

19 Aug 2004

5120-99-789-1337
Special Spanner

997891337
LMI: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-553-6151
Small Parts Box

995536151
BOX H: RNCC: 3 | RNVC: 2

12 Apr 2012

5120-99-136-6138

5120-99-872-9178
Bar Wrench

998729178
11/P461S1623: RNCC: 3 | RNVC: 2

18 Dec 1997

5120-99-792-8164
Swivel Knob Jeweler's Screwdriver

997928164
777A: RNCC: 3 | RNVC: 2

13 Apr 1988

5120-99-791-5546
Fuel P Gear Remover

997915546
PD157: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-222-9640
Torque Ad C Spanner

992229640
311-AT-599: RNCC: 3 | RNVC: 2

13 Nov 1991

5120-99-449-1142
Spanner

994491142
NO PRIMARY REF 99-449-1142: RNCC: 3 | RNVC: 2
9900-193: RNCC: 5 | RNVC: 2
88102-104-005: RNCC: 6 | RNVC: 9

31 Jan 1977

5120-99-664-4655
Spanner Wrench

996644655
MBEU7202-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-190-7156
Cleaner Rod

991907156
026L603Y-002: RNCC: 3 | RNVC: 2

7 Jul 2004

5120-99-122-7610
Screw Thre Inserter

991227610
528-10: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-784-8851
Optical Electrode G

997848851
DD1738: RNCC: 3 | RNVC: 2
GA7131-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-419-4756
Projector Ret Helix

994194756
NO PRIMARY REF 99-419-4756: RNCC: 3 | RNVC: 2
132-220: RNCC: 5 | RNVC: 2
0633-806277: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-104-7976
Wrapping- Wire Tool

991047976
NO PRIMARY REF 99-104-7976: RNCC: 3 | RNVC: 2
BKB503990: RNCC: 5 | RNVC: 2
C28005AC0MPLETEW1THHANDLE: RNCC: 5 | RNVC: 9

27 Oct 1987

5120-99-830-4242
Split Collect

998304242
V3256-1: RNCC: 3 | RNVC: 2

30 Jul 1980

5120-99-527-7762
Screwdriver Bit

995277762
B33372-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-835-0167
Spanner Wrench

998350167
V4418-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-961-1959
Mirror Glass

999611959
VSM/M: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-837-8113
Drive Pin Punch

998378113
T-51661: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-99-132-2990
Hand Terminal Crimping Tool

991322990
MR8PV11S: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-4119
Glass

994654119
1B4143: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-978-2842
Hand Screw Jack

999782842
AAR5033: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-664-2965
Hand Terminal Crimping Tool

996642965
HT210A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-978-1583
Screwdriver Bit Set And Handle

999781583
NA601F: RNCC: 3 | RNVC: 2
SCHEDULE 04201: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-257-4614
Crimping Die

992574614
16-1142: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-758-4335
Drain Plug Wrench

997584335
1600-5: RNCC: 3 | RNVC: 2
P6064: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-373-6133
Screwdriver Bit

5120-99-433-4577
Spanner Wrench

5120-99-401-3435

5120-99-250-1676
Socket Head Screw Key

992501676
202-043016: RNCC: 3 | RNVC: 2
202-043016: RNCC: 5 | RNVC: 2

18 Oct 2005

5120-99-337-8458
Rigging Tool

993378458
WG1588-0038-041: RNCC: 3 | RNVC: 2

23 Mar 2013

5120-99-957-9233
Lifting Tool

999579233
2 0048-223: RNCC: 3 | RNVC: 2

7 Mar 2003

5120-99-350-6336
Cartridge Removal T

993506336
EFMC75052: RNCC: 3 | RNVC: 2

8 Feb 2003

5120-99-567-0912
Extension Bar

995670912
11P400ZS3666/1: RNCC: 3 | RNVC: 2

18 Dec 1997

5120-99-130-0411
Crimping To Locator

991300411
604819-3: RNCC: 3 | RNVC: 2
1H622: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-9501
Screw Thread Insert Inserter

991209501
535-3: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-500-6684
Setting Device

995006684
AT63703: RNCC: 3 | RNVC: 2
2 0138-388: RNCC: 5 | RNVC: 2

3 Dec 2008

5120-99-511-0359
Spatula

995110359
CARD301-4: RNCC: 3 | RNVC: 2

25 Feb 2009

5120-99-825-6481
Fulcrum Guide Tool

998256481
V1092-1: RNCC: 3 | RNVC: 2

1 Mar 1977

5120-99-775-6495
Spanner Wrench

997756495
460009582C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-773-6708
Socket Wrench Socket

997736708
460009581B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-783-1259
Sharpening Stone

997831259
HF43: RNCC: 3 | RNVC: 2
H02240: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-782-7441
Screwdriver

997827441
H21735: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-5946
Socket Head Screw Key

997825946
H23020: RNCC: 1 | RNVC: 2
YAWM1904: RNCC: 3 | RNVC: 2
UW214A3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-403-0072
Retract Holder Remo

994030072
EFMC75053: RNCC: 3 | RNVC: 2

8 Feb 2003

5120-99-910-6554
Rivet Tongs

999106554
H2784: RNCC: 2 | RNVC: 2

25 Apr 1991

5120-99-910-4745
Wood Mallet Handle

999104745
H1343: RNCC: 3 | RNVC: 2
H1343: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-827-7481
Bevel Wheel Assembl

998277481
FV774648: RNCC: 3 | RNVC: 2

1 Mar 1977

5120-99-423-8133
Tap And Reamer Wrench

994238133
TD765: RNCC: 3 | RNVC: 2
555533: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-149-1361
Socket Wrench Socket

991491361
460003629: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-7872
Hand Rivet Snap

999107872
DEF1221: RNCC: 4 | RNVC: 1
H2370: RNCC: 5 | RNVC: 2
H2370: RNCC: 6 | RNVC: 9
1C5411: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5516
Pliers

999105516
BS3087: RNCC: 4 | RNVC: 1
H20863: RNCC: 5 | RNVC: 2
FA15851: RNCC: 6 | RNVC: 9
1B1790: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-825-5882
Socket Wrench

998255882
8837302: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-828-0460
Spanner Wrench

998280460
FV 836971: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-827-7156
Cardan Co Extractor

998277156
LC114: RNCC: 3 | RNVC: 2
LC114A: RNCC: 5 | RNVC: 2
LC114B: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-826-5363
Socket Wrench Extension

998265363
VT12916: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-202-7685
Spanner Wrench

992027685
3342021: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-422-5723
Socket Wrench

994225723
N0D2107-82DET2: RNCC: 3 | RNVC: 2
121321: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-458-9871
Socket Wrench Handle

994589871
DRT 68401: RNCC: 3 | RNVC: 2

4 Jun 2009

5120-99-607-9198

5120-99-457-5616

5120-99-462-5786
Spanner Adaptor

994625786
A0100684: RNCC: 3 | RNVC: 2
27VA4604: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-209-7863
Release Valve Kit

992097863
U32X8: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-3333
Open End Wrench

991303333
73330: RNCC: 3 | RNVC: 2
A73330: RNCC: 5 | RNVC: 2
51S70027: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-847-6751

5120-99-423-0640
Adaptor Head

994230640
KSE180: RNCC: 3 | RNVC: 2
4Q2226: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-424-1003
Mechanical Jack Handle

994241003
C236627: RNCC: 3 | RNVC: 2
C236627: RNCC: 5 | RNVC: 9
26FX95816: RNCC: 6 | RNVC: 9
26FX95816: RNCC: 6 | RNVC: 9

15 Oct 1979

5120-99-833-8581
Flyw Locking Device

998338581
10-201: RNCC: 3 | RNVC: 2
905.3.16.103.2: RNCC: 5 | RNVC: 2
041AN-016: RNCC: 6 | RNVC: 9

20 Apr 2004

5120-99-797-6791
Seal Guide

997976791
CH748-378: RNCC: 3 | RNVC: 2
CHA748-378: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-747-7024
Socket Head Screw Key

997477024
NMT-187: RNCC: 3 | RNVC: 2

1 Dec 1998

5120-99-052-3600
Socket Wrench Handle Bar

990523600
AE5110-7: RNCC: 3 | RNVC: 2

28 Aug 1991

5120-99-252-4783
Screw Extractor

992524783
REX112: RNCC: 3 | RNVC: 2
1G/902: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-144-6024
L Turning Over Tool

991446024
460002108: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-593-1646
Bushing

995931646
EA6505G514-101: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-248-4163
S Mounting Mandrel

992484163
17229024-0: RNCC: 3 | RNVC: 2
17229024-0: RNCC: 5 | RNVC: 2
021JB-030: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-964-4541
Barrel Pin Spanner

999644541
NO PRIMARY REF 99-964-4541: RNCC: 3 | RNVC: 2
AN32932: RNCC: 5 | RNVC: 2
M2AN32932: RNCC: 6 | RNVC: 9
7S1994: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-461-3357
Sett Block Assembly

994613357
ECP12589: RNCC: 3 | RNVC: 2
E2663-2: RNCC: 5 | RNVC: 1
0564-204307: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-859-8099
Mechanical Puller

998598099
AMP-00-06-06000: RNCC: 3 | RNVC: 2

17 Oct 2006

5120-99-612-8165
Mechanical Puller

996128165
121E93-821-00-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-609-1618
Torque Adaptor

996091618
NTS10906: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-728-0771

5120-99-224-6764
Tubular Screwdriver

992246764
101733: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-719-8802

5120-99-714-6712

5120-99-467-6517
Holding Block

994676517
MT1026-9: RNCC: 3 | RNVC: 2
27Q34754: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-591-2623
Boiler Tube Wire Brush

995912623
CT870106-1: RNCC: 3 | RNVC: 2
CT 870106: RNCC: 5 | RNVC: 1

28 May 1993

5120-99-666-0423
Spanner Wrench

996660423
59188: RNCC: 3 | RNVC: 2
63-0084-59188: RNCC: 5 | RNVC: 2

15 Oct 2003

5120-99-401-3885
Starter Dog Spanner

994013885
NO PRIMARY REF 99-401-3885: RNCC: 3 | RNVC: 2
263055: RNCC: 5 | RNVC: 2
LV7RU263055: RNCC: 6 | RNVC: 9
16C5440: RNCC: 6 | RNVC: 9

16 Dec 1975

5120-99-736-2334
Extractor

997362334
NO PRIMARY REF 99-736-2334: RNCC: 3 | RNVC: 2
26TD-95058: RNCC: 6 | RNVC: 9

25 Jun 2002

5120-99-845-3174
Hand Hammer

998453174
BS876: RNCC: 4 | RNVC: 1
METS/16/01/01: RNCC: 5 | RNVC: 1

4 Feb 2013

5120-99-445-3225
Spanner Wrench

994453225
110079-15831: RNCC: 3 | RNVC: 2
26VC-96086: RNCC: 6 | RNVC: 9

25 Feb 2002

5120-99-297-7163
Torque Screwdriver

992977163
QSN 600 FH: RNCC: 3 | RNVC: 2
060300: RNCC: 5 | RNVC: 2

19 Aug 2004

5120-99-501-4906
Bearing Staking Installation Tool

995014906
PE34915: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-99-716-2462
Extractor

997162462
T303921: RNCC: 3 | RNVC: 2
64LL1023: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-740-7518
Mandrel

997407518
T1593: RNCC: 3 | RNVC: 2

31 Jan 1986

5120-99-725-9389
Oil Se Guide Sleeve

997259389
277970: RNCC: 3 | RNVC: 2
84770510: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-835-7249
Positioning Fixture

998357249
CP13748: RNCC: 3 | RNVC: 2
118351ST: RNCC: 6 | RNVC: 9

8 Mar 1990

5120-99-747-3742
Aligning Tool

997473742
V5937/1: RNCC: 3 | RNVC: 2

5 Dec 1982

5120-99-721-9211
Sleeve

997219211
460009280-5: RNCC: 3 | RNVC: 2
460009280DETAIL5: RNCC: 6 | RNVC: 9

4 Dec 1985

5120-99-828-7204
Auto Adjust Spanner

998287204
NO PRIMARY REF 99-828-7204: RNCC: 3 | RNVC: 2
FV843522: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-747-2383
Face Spanner Wrench Socket

997472383
S3S17992000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-609-0591
Box Wrench

996090591
HU16973: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-739-7984
Bearing Installer

997397984
FV 2030034: RNCC: 3 | RNVC: 2

19 Jun 1986

5120-99-738-7091
Pump Barrel

997387091
W131860: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-740-8182
Sizing Former

997408182
T1412: RNCC: 3 | RNVC: 2

4 Feb 1986

5120-99-452-6146
Torque Wrench Adapter

994526146
29881: RNCC: 3 | RNVC: 2

14 Nov 1992

5120-99-614-8535
Spann Extension End

996148535
FHQ3676: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-723-9841
Extractor Electrica

997239841
35-852-513: RNCC: 3 | RNVC: 2
35-852-513: RNCC: 5 | RNVC: 2
5998-66-140-3305: RNCC: 6 | RNVC: 9

6 Aug 2002

5120-99-793-6261
End Cap Puller

997936261
91-25733A3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-796-5721
Socket Wrench

997965721
B43145-404: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-558-7515
Assembly Tool

995587515
T946: RNCC: 3 | RNVC: 2
ND25066 T946: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-213-3899
Socket Head Screw Key

992133899
NO PRIMARY REF 99-213-3899: RNCC: 3 | RNVC: 2
189300: RNCC: 5 | RNVC: 2

26 Nov 2009

5120-99-701-2474
Open End Wrench

997012474
C-52004-477-00-7: RNCC: 3 | RNVC: 2
52004-477-00-7: RNCC: 5 | RNVC: 2

17 Dec 1991

5120-99-977-1409
Socket Wrench Handle

999771409
P.S.031 DETAIL5: RNCC: 3 | RNVC: 2
PS031: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-794-4207
Bit

997944207
FAM4-2: RNCC: 3 | RNVC: 2
FAM4.2.: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-562-8633
Special Spanner

995628633
829849-00: RNCC: 3 | RNVC: 2
3834-55: RNCC: 6 | RNVC: 9

24 Oct 2011

5120-99-282-0907
Socket Sp Extension

992820907
SX36: RNCC: 3 | RNVC: 2
SX36: RNCC: 5 | RNVC: 2
C569-70T269709: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-257-5722
Box Wrench

992575722
BUGGSIE 742: RNCC: 3 | RNVC: 2
742: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-038-3203
Mechanical Puller

990383203
QB13188: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-402-0481
Water Pump I Drawer

5120-99-740-2941
B Remover-Installer

5120-99-829-5816
Slave Ring

998295816
CT9056: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-826-5625
Open End Wrench

998265625
VSM5219: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-829-6646
Drum Tension Gauge

998296646
FV849430: RNCC: 3 | RNVC: 2
765017: RNCC: 5 | RNVC: 2

30 Jul 1980

5120-99-910-7884
Hand Rivet Snap

999107884
DEF1221: RNCC: 4 | RNVC: 1
H5157: RNCC: 5 | RNVC: 2
H5157: RNCC: 6 | RNVC: 9
1C5495: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-7912
Riv Snap And Set Up

999107912
DEF1221: RNCC: 4 | RNVC: 1
H2395: RNCC: 6 | RNVC: 9
1C5009: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-828-2485
Probe And Gauge Ass

998282485
FV837036: RNCC: 3 | RNVC: 2

24 Aug 1977

5120-99-828-8982
Face Spanner Wrench Socket

998288982
ST200: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-700-6005
Wrench Key

997006005
NKT004: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-418-5032
Peg Spanner

994185032
2819T000: RNCC: 3 | RNVC: 2

4 Jun 1999

5120-99-707-3422
Torque Wrench Adapter

997073422
50541: RNCC: 3 | RNVC: 2

4 Oct 2006

5120-99-667-1071
Torque Handle

996671071
11136: RNCC: 3 | RNVC: 2
24.5951: RNCC: 5 | RNVC: 1
200/TH: RNCC: 5 | RNVC: 2
23160: RNCC: 6 | RNVC: 9
11136(200 SERIES): RNCC: 6 | RNVC: 9

13 Aug 1991

5120-99-593-8855
Block Tool

995938855
EA6705G541-041: RNCC: 3 | RNVC: 2

10 Apr 2004

5120-99-821-8172

5120-99-821-8164

5120-99-821-8163

5120-99-830-7882
Mechanical Puller

998307882
093000: RNCC: 3 | RNVC: 2
930: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-743-6295
Box Wrench

997436295
110079-15535: RNCC: 3 | RNVC: 2
26VC-95875: RNCC: 6 | RNVC: 9

3 Apr 2002

5120-99-799-1750
Socket Wrench Socket

997991750
100401-4061-ASY: RNCC: 3 | RNVC: 2
M79450: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-831-6909
Roller Locking Tool

998316909
FV 2171092: RNCC: 3 | RNVC: 2
FV 2171092: RNCC: 5 | RNVC: 2

5 Jan 1995

Load More Results