What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 82 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 82 of 108

5120-99-742-9525

5120-99-122-5127
Socket Wrench Handle

991225127
1225127: RNCC: 3 | RNVC: 2
KM5: RNCC: 3 | RNVC: 2
BS4006-TABLE 26 6.30MM: RNCC: 4 | RNVC: 1
T2ED1189: RNCC: 5 | RNVC: 2
1700060: RNCC: 5 | RNVC: 2
547-149: RNCC: 5 | RNVC: 2
1L510: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-546-5495
Open End Wrench

995465495
027-03839: RNCC: 3 | RNVC: 2
842-94/25: RNCC: 6 | RNVC: 9
SR0743/5: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-0016

5120-99-782-1115

5120-99-944-3090

5120-99-437-5867
Sewing Palm

994375867
NO PRIMARY REF 99-437-5867: RNCC: 3 | RNVC: 2
FIG5953-121: RNCC: 5 | RNVC: 2
C034: RNCC: 5 | RNVC: 2
0275-2391: RNCC: 6 | RNVC: 9
C034: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-513-4904
Flat Tip Screwdriver

995134904
NO PRIMARY REF 99-513-4904: RNCC: 3 | RNVC: 2
450-0841: RNCC: 5 | RNVC: 2
450-0841: RNCC: 5 | RNVC: 9

19 Jul 2005

5120-99-454-7678
Spanner Wrench

994547678
MDSK853-388: RNCC: 3 | RNVC: 2
720803: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-924-5829
Screw Thread Insert Inserter

999245829
535-10: RNCC: 3 | RNVC: 2
85-25-19-10-1745: RNCC: 5 | RNVC: 2
1C7119: RNCC: 6 | RNVC: 9
DEFSTAN51-7: RNCC: 6 | RNVC: 9
88620-617-295: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-531-7852
Spanner Wrench

995317852
UX 11346: RNCC: 3 | RNVC: 2
UX 11346/RRA: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-807-4656
Hydraul Gear Pusher

998074656
145G0121-1: RNCC: 3 | RNVC: 2

31 Mar 1995

5120-99-450-6064
Socket

994506064
ARM4601SS5: RNCC: 3 | RNVC: 2
8B3601: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-149-1846
Mechanical Puller

991491846
460003571: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-213-8615
Bearing Staking Installation Tool

992138615
PE34924: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-99-154-6915

5120-99-977-5187
Wrench Spanner

999775187
01TC11826: RNCC: 3 | RNVC: 2
01TC11826: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-975-6578
Socket Wrench Socket

999756578
PE34909: RNCC: 3 | RNVC: 2

6 Jan 2012

5120-99-130-0426
Crimping To Die Set

991300426
19569: RNCC: 3 | RNVC: 2
3A3679: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-197-0741
Spanner

991970741
460001682-43: RNCC: 3 | RNVC: 2

22 Mar 1995

5120-99-466-2973
Nose Piece

994662973
15017/5: RNCC: 3 | RNVC: 2
1C7478: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-305-0112
Torque Wrench

993050112
DSR3728-1: RNCC: 3 | RNVC: 2

1 Jul 2005

5120-99-122-7648
Screw Thread Insert Inserter

991227648
528-4: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-449-0211
Open End Wrench

994490211
2J7587: RNCC: 3 | RNVC: 2
6J7587: RNCC: 5 | RNVC: 2
VS2428: RNCC: 5 | RNVC: 2
40-43-40-44: RNCC: 5 | RNVC: 2
T2AB2059: RNCC: 5 | RNVC: 2
547-463207: RNCC: 6 | RNVC: 9
H547-463207: RNCC: 6 | RNVC: 9
851716: RNCC: 6 | RNVC: 9
BS192: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-717-4922
Mechanical Puller Kit

997174922
WG1388-0167-041: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-641-4683
Scre Cranked Handle

996414683
ZD17493-216A3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-411-9045
Assembly Tool

994119045
NO PRIMARY REF 99-411-9045: RNCC: 3 | RNVC: 2
ST1935: RNCC: 5 | RNVC: 9
27Q13484: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-564-8981
Hand Screw Jack

995648981
PA1172-2003: RNCC: 3 | RNVC: 2

20 Dec 2007

5120-99-327-4099
Flaring Set Adaptor

993274099
99-96: RNCC: 3 | RNVC: 2
FL963G80012: RNCC: 6 | RNVC: 9

26 Sep 1996

5120-99-139-8454

5120-99-420-4091

5120-99-561-4513
Fi Open Jaw Spanner

995614513
00112-0-85-21: RNCC: 3 | RNVC: 2
434-280912: RNCC: 6 | RNVC: 9
H434-280912: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-720-1778
Preformed Packing Inserter

997201778
340-614-4000-06: RNCC: 3 | RNVC: 2
SN765A: RNCC: 6 | RNVC: 9

25 Mar 1999

5120-99-728-0306

5120-99-135-0809
Socket Wrench H Bar

991350809
14241911: RNCC: 3 | RNVC: 2
FL982TF0382: RNCC: 6 | RNVC: 9

14 Jul 1999

5120-99-617-1762
Mechanical Puller

996171762
HU17208: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-9846
Mountainee Ice Pick

991209846
ICE AXE 28IN WITH SLING: RNCC: 3 | RNVC: 2

11 Mar 1991

5120-99-216-9653
Tightening Tool

992169653
NO PRIMARY REF 99-216-9653: RNCC: 3 | RNVC: 2
092856: RNCC: 5 | RNVC: 2

26 Feb 2010

5120-99-401-3583

5120-99-120-4664
Extension Rivatorxb

5120-99-125-4205

5120-99-127-7491

5120-99-539-6023

5120-99-428-2270
Lamp Extractor

994282270
BKA503203: RNCC: 3 | RNVC: 2
CN2052: RNCC: 5 | RNVC: 2
2-26978: RNCC: 5 | RNVC: 2
88200-200-019: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-4984
Spanner

996664984
NO PRIMARY REF 99-666-4984: RNCC: 3 | RNVC: 2
T 410357: RNCC: 5 | RNVC: 2
64LL1507: RNCC: 6 | RNVC: 9

19 Aug 2005

5120-99-120-9046
Rive Wrench Adaptor

991209046
7180-0600: RNCC: 3 | RNVC: 2
7180-0600: RNCC: 5 | RNVC: 2
G18/4: RNCC: 5 | RNVC: 2
7180-0600: RNCC: 5 | RNVC: 9
85-688-9992: RNCC: 6 | RNVC: 9
1C7094: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-338-7623
Punch Block

993387623
HU23951-01: RNCC: 3 | RNVC: 2

8 Aug 2003

5120-99-138-5123
Swaging Tool Ha Die

991385123
NO PRIMARY REF 99-138-5123: RNCC: 3 | RNVC: 2
3002196: RNCC: 5 | RNVC: 2

27 Mar 1979

5120-99-235-4914
Felling Bar

992354914
988-048-080: RNCC: 3 | RNVC: 2

7 Mar 2007

5120-99-580-5415
Coil Thread Nozzle

995805415
A30-10: RNCC: 3 | RNVC: 2
H21472: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-5718
Retaining Ri Points

991205718
0: RNCC: 3 | RNVC: 2
7065M-O: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-549-5669
Mounting Tool

995495669
2 0065-894: RNCC: 3 | RNVC: 2

7 Mar 2003

5120-99-833-3099
Retaining Ring Pliers

998333099
OD31902/03: RNCC: 3 | RNVC: 2

20 Sep 2002

5120-99-521-4142
Spanner Wrench

995214142
CD11195: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-120-4359
Magazine Brace Bit

991204359
MP2332: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-297-8669
Craftsman's Tweezers Set

992978669
NO PRIMARY REF 99-297-8669: RNCC: 3 | RNVC: 2
361-3097: RNCC: 5 | RNVC: 2

5 Aug 2011

5120-99-454-2642
Lamp Extractin Tool

994542642
SES427-6: RNCC: 3 | RNVC: 2
SR1891/2: RNCC: 5 | RNVC: 2
721-94/4: RNCC: 6 | RNVC: 9

7 Jan 1998

5120-99-409-4603
Box Wrench

994094603
T3130/1: RNCC: 3 | RNVC: 2
T 3130: RNCC: 5 | RNVC: 1
T 3130: RNCC: 5 | RNVC: 1
T3130/1: RNCC: 5 | RNVC: 2

17 Jul 1992

5120-99-819-1785
Driftpin

998191785
FV719631-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-0456
Tang Break Of Punch

991240456
3581-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-830-4244
Flange Plate Assemb

998304244
V3400-1: RNCC: 3 | RNVC: 2

30 Jul 1980

5120-99-721-9328
Sleeve

997219328
460009313-2: RNCC: 3 | RNVC: 2
460009313DETAIL2: RNCC: 6 | RNVC: 9

2 Sep 1989

5120-99-445-2426
Pin Inserter

994452426
MBEU192156: RNCC: 3 | RNVC: 2
101YP-021: RNCC: 6 | RNVC: 9

30 Sep 2009

5120-99-810-5021
Spanner

998105021
274163: RNCC: 3 | RNVC: 2
LE462D3: RNCC: 6 | RNVC: 9
G005-975224: RNCC: 6 | RNVC: 9

7 Dec 1996

5120-99-422-4607
Spanner Wrench

994224607
N37273-3: RNCC: 3 | RNVC: 2
88604-606-036: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-551-4699
Removal-Replace Too

995514699
S022-DDS-5884: RNCC: 3 | RNVC: 2
M0019802: RNCC: 5 | RNVC: 2

20 Feb 2007

5120-99-411-9048
Drift

994119048
NO PRIMARY REF 99-411-9048: RNCC: 3 | RNVC: 2
ST1403: RNCC: 5 | RNVC: 9
27Q12310: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-859-8235
Socket Head Screw Key

998598235
001X-048: RNCC: 3 | RNVC: 2

21 Oct 2010

5120-99-763-7818
Pipe Wrench

997637818
233C: RNCC: 3 | RNVC: 2
233C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-703-0668
Trowel

997030668
86-D1621: RNCC: 3 | RNVC: 2

9 Nov 2007

5120-99-747-5870
Mechanical Puller

997475870
48741 M9/405: RNCC: 3 | RNVC: 2
48741M9-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-827-6871
Wheel Brace

998276871
NO PRIMARY REF 99-827-6871: RNCC: 3 | RNVC: 2
71241553: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-734-0181
Quill Shaf Adaptor

997340181
453-7408-116: RNCC: 3 | RNVC: 2
F1054-038200: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-660-6479
Electrical Contact Remover

996606479
ABB-ET-16: RNCC: 3 | RNVC: 2

15 Jul 1993

5120-99-513-9565
Inspection Mirror

995139565
KT-103-160: RNCC: 3 | RNVC: 2

2 Jul 2012

5120-99-427-8669
Screwdri Attachment

994278669
NO PRIMARY REF 99-427-8669: RNCC: 3 | RNVC: 2
3AP3481: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-852-8930
Seperator Tool

998528930
3031D601-001: RNCC: 3 | RNVC: 2

7 Nov 2003

5120-99-795-3731
Tamperp Screwdriver

997953731
NO PRIMARY REF 99-795-3731: RNCC: 3 | RNVC: 2
541-977: RNCC: 5 | RNVC: 2

5 Apr 1995

5120-99-253-6897

5120-99-533-4668

5120-99-727-8337
Round Sling

5120-99-434-7203
Screw Extractor

994347203
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
F1FA13172: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-9026
Hand Blind Riveter

991209026
7300-0006: RNCC: 3 | RNVC: 2
7300-0006: RNCC: 5 | RNVC: 2
AHJ0SRF190F200: RNCC: 5 | RNVC: 2
7300-0006: RNCC: 5 | RNVC: 9
EF3-16: RNCC: 5 | RNVC: 9
7300-0006: RNCC: 5 | RNVC: 9
AHJ0SRF190: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-253-7224
T Handle Driver

992537224
510506: RNCC: 3 | RNVC: 2

13 Jan 2001

5120-99-450-4046
Jaw Spreader Assemb

994504046
7494-3500: RNCC: 3 | RNVC: 2
7494-3500: RNCC: 5 | RNVC: 2
85-690-4396: RNCC: 6 | RNVC: 9

11 Sep 1991

5120-99-771-5966
Socket & Drive

997715966
P5173-189100: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-767-1700
Spanner Wrench

997671700
MBEU74273: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-724-6438
Hand Terminal Crimping Tool

997246438
F0011000: RNCC: 3 | RNVC: 2

29 Mar 2006

5120-99-957-7843
Open End Wrench

999577843
MBEU149617: RNCC: 3 | RNVC: 2
N00019-85-C-0143: RNCC: 6 | RNVC: 9
012QD056: RNCC: 6 | RNVC: 9

30 Oct 2001

5120-99-715-9498
Removal Tool

997159498
S6170-35026: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-748-0223
Open End Wrench

997480223
2JM1415: RNCC: 3 | RNVC: 2
6JM1415: RNCC: 5 | RNVC: 2
547-463210: RNCC: 6 | RNVC: 9
H547-463210: RNCC: 6 | RNVC: 9
BS192: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-6601
Face Spanner Wrench Socket

996596601
P-891065-405: RNCC: 3 | RNVC: 2
P891065-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-258-9074
Socket Wrench

992589074
T32: RNCC: 3 | RNVC: 2

9 Feb 2006

5120-99-735-4694
Lapping Holder And

997354694
36143M9: RNCC: 3 | RNVC: 2
H36143M9/D: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-825-4047
Injector Removal To

998254047
STU836-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-888-9073
Bearing And Bushing Inserter

998889073
WD0188-10285-101: RNCC: 3 | RNVC: 2

11 Jan 1995

5120-99-253-8847
Spanner Wrench

5120-99-610-7837

5120-99-923-2634
Open End Wrench

999232634
B9022: RNCC: 3 | RNVC: 2

1 Apr 1999

5120-99-879-5367
Spanner

998795367
80.861.02659.300: RNCC: 3 | RNVC: 2

9 Feb 2009

5120-99-910-6208
Socket Wrench

999106208
UKD1S2091: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-725-3350
Spatula

997253350
SWY060P: RNCC: 3 | RNVC: 2
P0006551: RNCC: 5 | RNVC: 2

22 Sep 2008

5120-99-740-3297
Tee Bar

997403297
D7359: RNCC: 3 | RNVC: 2
D7359: RNCC: 5 | RNVC: 2
CX0003684: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-680-2015
Face Spanner Wrench Socket

996802015
NO PRIMARY REF 99-680-2015: RNCC: 3 | RNVC: 2
B000700016-1: RNCC: 5 | RNVC: 2
B000700016-1: RNCC: 5 | RNVC: 9

3 Jun 2011

5120-99-104-1098
Spanner Wrench

991041098
Z61338: RNCC: 3 | RNVC: 2
558-2-00741: RNCC: 5 | RNVC: 2
19033R1: RNCC: 6 | RNVC: 9
Z61338: RNCC: 6 | RNVC: 9
1H112: RNCC: 6 | RNVC: 9
1H578: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-558-8321
Box Wrench

995588321
95406 ITEM 1: RNCC: 3 | RNVC: 2
95406-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-332-8375
Torque Load Fixture

993328375
TL1P443A0002: RNCC: 3 | RNVC: 2

16 Jul 1999

5120-99-144-6107
Steering Extractor

991446107
460002215: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-406-2554
Turnlock Fastener Clinching Punch

994062554
F6TOOL1: RNCC: 3 | RNVC: 2
28FP451: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-558-8247
Spanner Wrench

995588247
T136RRA: RNCC: 3 | RNVC: 2
T136: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-554-5505
Valve Seat Turning

995545505
0D28486: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-149-0370
Spanner Wrench

991490370
460002434: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-433-4758

5120-99-434-7186

5120-99-784-8646

5120-99-838-1884
Bearing. Remover

5120-99-762-6899

5120-99-810-2020

5120-99-838-3291

5120-99-137-3467
Spanner Wrench

991373467
153-226: RNCC: 3 | RNVC: 2
GD1016: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-828-6739
Alignment Tool Timi

998286739
NO PRIMARY REF 99-828-6739: RNCC: 3 | RNVC: 2
Z8560: RNCC: 5 | RNVC: 2
AST-B102: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-467-3142
Con Installing Tool

994673142
NO PRIMARY REF 99-467-3142: RNCC: 3 | RNVC: 2
M15513-12: RNCC: 5 | RNVC: 2
1H420: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-4522
Screwdriver Bit Set And Handle

991364522
99PS40: RNCC: 3 | RNVC: 2
16M30006: RNCC: 6 | RNVC: 9
6JB1201: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-160-4519
Socket Head Screw Key

991604519
331/33692: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-277-5537
Mai Extraction Gear

992775537
YJ.70040.A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-745-9252
Injector A Tool Kit

997459252
3375842: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-7659
Socket Wrench Crowfoot Attachment

997107659
KU.12704: RNCC: 3 | RNVC: 2
RT20865: RNCC: 5 | RNVC: 2
64TN31: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-500-9601
Seal Inserter

995009601
AO272719: RNCC: 3 | RNVC: 2

24 Jul 1998

5120-99-580-4563

5120-99-841-8225

5120-99-669-5837

5120-99-611-9562
Drift

996119562
NTS13189-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-135-3217
Combination Open End And Spanner Wrench

991353217
T-03389: RNCC: 3 | RNVC: 2
T-03389: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-467-5399
Valve Spring Compressor

994675399
MT1544: RNCC: 3 | RNVC: 2
27Q27365: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-520-5231
Spanner Wrench

995205231
85-70-19-10-1004: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-7477
Retainer Closu Tool

997697477
PA1113-2149: RNCC: 3 | RNVC: 2

23 Sep 2002

5120-99-875-6765
Screwdriver Bit

998756765
029520: RNCC: 3 | RNVC: 2
029520: RNCC: 5 | RNVC: 2
029520: RNCC: 5 | RNVC: 2

4 Jul 1991

5120-99-910-7768
Dolly Rivet Holder

999107768
H5150: RNCC: 3 | RNVC: 2
1C5311: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-376-9402
Hand Hydraulic Jack

993769402
2 0176-480: RNCC: 3 | RNVC: 2
44 5253: RNCC: 5 | RNVC: 2

29 Nov 2010

5120-99-444-4476
Elec Alignment Tool

994444476
A49394-105-0: RNCC: 3 | RNVC: 2
10AG1817: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-788-7116
Oil Seal Installer

997887116
21-017: RNCC: 3 | RNVC: 2
21-017-A: RNCC: 5 | RNVC: 2
21-017A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-602-1086
Socket Wrench Handle Bar

996021086
T.R.116/1: RNCC: 3 | RNVC: 2
B/T.R.116/1: RNCC: 5 | RNVC: 2

24 May 1991

5120-99-761-3726
Socket Wrench

997613726
P461Z1020: RNCC: 3 | RNVC: 2
11/P461Z1020: RNCC: 5 | RNVC: 2
T.745/2/1: RNCC: 5 | RNVC: 2
H727-460354: RNCC: 6 | RNVC: 9
5120-99-309-4973: RNCC: 6 | RNVC: 9
992448978: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-051-4561
Spanner Wrench

990514561
T296: RNCC: 3 | RNVC: 2
TD296: RNCC: 5 | RNVC: 2
DN36: RNCC: 6 | RNVC: 9
DN37: RNCC: 6 | RNVC: 9

11 Oct 1991

5120-99-456-2159
Hand Saw Set

994562159
H6522: RNCC: 2 | RNVC: 2
F1FA16864: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-131-5606
Peg Spanner

991315606
MBEU192208: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-99-617-6065
Socket Wrench

996176065
MBEU61420: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-994-9453
Socket Head Scr Key

5120-99-463-2214
Pressure Pl Spanner

5120-99-963-1111

5120-99-924-5858

5120-99-970-5487

5120-99-558-8327
Socket Wrench

995588327
95406 ITEM 7: RNCC: 3 | RNVC: 2
95406-7: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-9034
Rive Wrench Adaptor

991209034
1G29-2: RNCC: 3 | RNVC: 2
7290-0201: RNCC: 5 | RNVC: 2
1G29-2: RNCC: 5 | RNVC: 9
7290-0201: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-718-8949
J-Bolt Removal Tool

997188949
7994-0139: RNCC: 3 | RNVC: 2
7994-0139: RNCC: 5 | RNVC: 2
7994-0139: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-807-9054
Wrench Adjustable

998079054
NO PRIMARY REF 99-807-9054: RNCC: 3 | RNVC: 2
300/18IN: RNCC: 5 | RNVC: 2

11 Dec 1995

5120-99-799-1295
Mounting Tool

997991295
2 0077-152: RNCC: 3 | RNVC: 2

15 Mar 2007

5120-99-998-9145
Open End Box Wrench

999989145
SK1054.6: RNCC: 3 | RNVC: 2
100877-7502-002: RNCC: 5 | RNVC: 2
UW215A1B: RNCC: 6 | RNVC: 9

5120-99-923-8140
Open End Wrench

999238140
0EW203: RNCC: 3 | RNVC: 2
1C6551: RNCC: 6 | RNVC: 9
0277-6551: RNCC: 6 | RNVC: 9
0277-923-8140: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-923-4589
Valve Sea Extractor

999234589
NO PRIMARY REF 99-923-4589: RNCC: 3 | RNVC: 2
DP3075: RNCC: 5 | RNVC: 2
0434-923-4589: RNCC: 6 | RNVC: 9
0434-400151: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-833-6851
Spring Brak Adaptor

998336851
NO PRIMARY REF 99-833-6851: RNCC: 3 | RNVC: 2
CD61-2X: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-946-8839
Electrical Inserter

999468839
NO PRIMARY REF 99-946-8839: RNCC: 3 | RNVC: 2
403790: RNCC: 5 | RNVC: 2
6ANR1: RNCC: 5 | RNVC: 2
ANR1: RNCC: 6 | RNVC: 9
1H302: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-549-8440
Flip Alignment Jig

995498440
DR3180-0038-AS: RNCC: 3 | RNVC: 2

16 Apr 1993

5120-99-910-5880
Flat Tip Screwdriver

999105880
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DEF1191: RNCC: 5 | RNVC: 9
DEF1191-H5198: RNCC: 5 | RNVC: 9
H5198: RNCC: 6 | RNVC: 9
H5198: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-400-2504
Oil Filter Wrench

994002504
NO PRIMARY REF 99-400-2504: RNCC: 3 | RNVC: 2
542-3751: RNCC: 5 | RNVC: 2

31 May 2011

5120-99-754-7759
Wrench Assembly

997547759
S6170-15009: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-774-7211
Special To Bracket

997747211
17229061-0: RNCC: 3 | RNVC: 2
17229061-0: RNCC: 5 | RNVC: 2
021NX-032: RNCC: 6 | RNVC: 9

31 May 2002

5120-99-910-5521
Pliers

999105521
UKC1SPR0V48-H1845: RNCC: 2 | RNVC: 2
BS3087-TO GUIDE: RNCC: 3 | RNVC: 1
BS3087: RNCC: 3 | RNVC: 1
PW216/5: RNCC: 3 | RNVC: 2
DEFSTAN51-10: RNCC: 6 | RNVC: 9
FA15875: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-6300
Torque Wrench Adapter

996076300
S3S13016006: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-806-6951
Oil S Extractor Set

5120-99-808-1098
Piston R Compressor

5120-99-710-6576
Socket Wrench H Bar

5120-99-391-8397
Quick Release Vise

993918397
RECORD112: RNCC: 3 | RNVC: 2
RECORD112: RNCC: 5 | RNVC: 2

12 Sep 2000

5120-99-747-8372
Six Point Tip Screwdriver Set

997478372
NO PRIMARY REF 99-747-8372: RNCC: 3 | RNVC: 2
662-658: RNCC: 5 | RNVC: 2
4877: RNCC: 5 | RNVC: 2

17 Feb 2000

5120-99-258-1264
Seal Insertion Tool

992581264
NO PRIMARY REF 99-258-1264: RNCC: 3 | RNVC: 2
809910966: RNCC: 5 | RNVC: 2
ST680N7219: RNCC: 5 | RNVC: 9
FH970C90007: RNCC: 6 | RNVC: 9

30 Oct 1997

5120-99-613-5949
Reaction Tool

996135949
EA6405G536-041: RNCC: 3 | RNVC: 2
112DJ-004: RNCC: 6 | RNVC: 9

23 Mar 2011

5120-99-562-5096
Face Spanner Wrench Socket

995625096
EB8-88-57: RNCC: 3 | RNVC: 2
26FZ-95488: RNCC: 6 | RNVC: 9

6 Jul 2001

5120-99-802-2245
Inject Needle Probe

998022245
7244-6E: RNCC: 3 | RNVC: 2
0D13156: RNCC: 5 | RNVC: 2
7244-6E: RNCC: 5 | RNVC: 2
W20RR0D13156: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-663-9217
Locking Wire

996639217
NO PRIMARY REF 99-663-9217: RNCC: 3 | RNVC: 2
100 730: RNCC: 5 | RNVC: 2

6 Feb 1998

5120-99-411-8994
Extractor

994118994
NO PRIMARY REF 99-411-8994: RNCC: 3 | RNVC: 2
ST1914: RNCC: 5 | RNVC: 9
27Q13589: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-954-1865

5120-99-763-9209
Flatpoi Screwdriver

5120-99-763-8435
Termi Crimping Tool

5120-99-546-1440
Open End Wrench

995461440
027-00518: RNCC: 3 | RNVC: 2
560-239882: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-4983
Peg Spanner

996664983
NO PRIMARY REF 99-666-4983: RNCC: 3 | RNVC: 2
T 399244: RNCC: 5 | RNVC: 2
64LL1499: RNCC: 6 | RNVC: 9

19 Aug 2005

5120-99-910-4554
Lamp Extractor

999104554
D1000-5: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
1H2B: RNCC: 6 | RNVC: 9
Y2YB02297: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-657-1775
Pliers

996571775
3854/36922/5: RNCC: 3 | RNVC: 2
B3854/36922/5: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-190-7190
Vice Clamp

991907190
A7A/2000/616: RNCC: 1 | RNVC: 2
810-546: RNCC: 3 | RNVC: 2
810-546: RNCC: 5 | RNVC: 2

8 Jun 2005

5120-99-423-8235
Crowfoot Spanner

994238235
NO PRIMARY REF 99-423-8235: RNCC: 3 | RNVC: 2
9029-3: RNCC: 5 | RNVC: 2
558730: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-805-8651

5120-99-809-8329

5120-99-658-5298
Spanner Wrench

996585298
3AB34635: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-739-5414
Socket Head Screw Key

997395414
4H302209: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-99-718-8284
Torque Wrench

997188284
1702152: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-963-3546

5120-99-724-4440
Oil Seal Replacer

997244440
303-849: RNCC: 3 | RNVC: 2
18G1456: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-197-3511
Shaft Assembly Tool

991973511
NTS14752: RNCC: 3 | RNVC: 2
NTS14752: RNCC: 5 | RNVC: 2

4 Dec 2001

5120-99-537-8226
Punch

995378226
062 004: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-799-2615
Torque Wrench

997992615
ADS 25: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 32: RNCC: 4 | RNVC: 1
010180: RNCC: 5 | RNVC: 2
TABLE I(D): RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-720-8733
Pliers

997208733
MULTI-PLIER: RNCC: 3 | RNVC: 2

20 Sep 1991

5120-99-547-9593
Pliers

995479593
505B-CP: RNCC: 3 | RNVC: 2
505B-CP: RNCC: 5 | RNVC: 2

11 Aug 1995

5120-99-172-9616
Socket Wrench

991729616
KTK1001: RNCC: 3 | RNVC: 2
02343-983: RNCC: 5 | RNVC: 2

13 May 1992

5120-99-460-3979
Mechanical Puller

994603979
T86699: RNCC: 3 | RNVC: 2
PE50304: RNCC: 5 | RNVC: 2
64DE287: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-466-1697
Socket Spann Socket

994661697
NO PRIMARY REF 99-466-1697: RNCC: 3 | RNVC: 2
02-02-0017: RNCC: 5 | RNVC: 2
1L574: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-463-5655
Socket Spann Handle

5120-99-629-5177
Face Spanner Wrench Socket

996295177
WG0188-7009-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-377-5410
Seal Inserter And Remover

993775410
EA6305G662-041: RNCC: 3 | RNVC: 2

9 Dec 2003

5120-99-764-6322
Reve Ratchet Wrench

5120-99-731-5300
Face Wrench Socket

5120-99-755-1101

5120-99-795-2770
Hand Hydraulic Jack

997952770
SSL(M)4-18-34: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-152-3091
Socket Wrench Crowfoot Attachment

991523091
MTE 0254-01: RNCC: 3 | RNVC: 2
251/01: RNCC: 5 | RNVC: 2
175/01 SCALE 03377-16/5/91: RNCC: 6 | RNVC: 9

18 Sep 1991

5120-99-547-9084
Split Starter Tool

995479084
Y3J72950: RNCC: 3 | RNVC: 2
875/32/3: RNCC: 6 | RNVC: 9
SM209C/D/CSSE/DTR/19/339/3632: RNCC: 6 | RNVC: 9

30 Nov 1994

5120-99-708-9447
Socket Wrench Socket

997089447
4KSM99F21: RNCC: 3 | RNVC: 2

8 Jul 1992

5120-99-521-7980
Spanner Wrench

995217980
A27137: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-4096
Melting Pot

994654096
1B1815: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-753-9791
Bearing Remover And

997539791
J28435: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-135-6634
Collet Spring

991356634
12606: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-667-3699
Mechanical Puller Adapter

996673699
AMP 00 06 06004: RNCC: 3 | RNVC: 2
60206259: RNCC: 5 | RNVC: 2

3 Jul 2009

5120-99-753-9787
Clearance Gauge

997539787
J26916: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-751-8862
Seal Fitting Sleeve

997518862
ST28552: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-750-7382
Face Spanner Wrench Socket

997507382
1802T405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-606-5596

5120-99-102-3862

5120-99-255-4508
Spanner Wrench

992554508
TC2589: RNCC: 3 | RNVC: 2

12 Jun 1992

5120-99-655-0323
Spanner Wrench

996550323
460009074C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-9539
Extens Ring Spanner

991209539
1209539: RNCC: 3 | RNVC: 2
1701079: RNCC: 5 | RNVC: 2
T2EN6969: RNCC: 5 | RNVC: 2
1L1209539: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-1444
Crimping Tool Die

991391444
29272: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-341-1192
Electronic Component Inserter And Remover

993411192
505C-CP: RNCC: 3 | RNVC: 2
505C-CP: RNCC: 5 | RNVC: 2

13 Dec 1995

5120-99-527-5543
Retaining Ri Pliers

995275543
NO PRIMARY REF 99-527-5543: RNCC: 3 | RNVC: 2
603346: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-710-6355
Fuel Meter Inserter

997106355
NO PRIMARY REF 99-710-6355: RNCC: 3 | RNVC: 2
PE16182: RNCC: 5 | RNVC: 2
TK10: RNCC: 5 | RNVC: 2

25 Jul 1979

5120-99-311-5135
Torque Wrench

993115135
MBEU82244: RNCC: 1 | RNVC: 2
017300 GREEN: RNCC: 3 | RNVC: 2

27 Jan 2010

5120-99-536-1527
Centralising Tool

995361527
YJ 70704A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-664-0248
Mechanical Puller

996640248
AM23444/7: RNCC: 3 | RNVC: 9

2 Sep 1989

5120-99-610-5377
Boring Tool

996105377
NO PRIMARY REF 99-610-5377: RNCC: 3 | RNVC: 2
PE55697: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-768-7016
Socket Wrench Socket

997687016
NMT-167: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-99-437-5916
Wrench Spanner

994375916
NO PRIMARY REF 99-437-5916: RNCC: 3 | RNVC: 2
UD19882: RNCC: 5 | RNVC: 2
0277-193602: RNCC: 6 | RNVC: 9

23 Nov 1988

5120-99-803-0179
Stitcher Roller

998030179
1017: RNCC: 3 | RNVC: 2
040510: RNCC: 5 | RNVC: 2
596102: RNCC: 5 | RNVC: 2
AP0018: RNCC: 5 | RNVC: 2
LV6MT2-5382: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-851-5233
Combination Box And Open End Wrench

998515233
NO PRIMARY REF 99-851-5233: RNCC: 3 | RNVC: 2
495-3532: RNCC: 5 | RNVC: 2

8 Feb 2011

5120-99-787-4411
Mechanical Puller

997874411
CHA748-1133: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-831-7262
Socket Wrench

5120-99-108-9810
Stud Setter

991089810
PE 50050: RNCC: 3 | RNVC: 2
T.79972: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-100-8513

5120-99-388-5688
Crankshaft Remover

993885688
21-151: RNCC: 3 | RNVC: 2
21-151: RNCC: 5 | RNVC: 2
982OT0017: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-99-758-6040
Socket Head Scr Key

5120-99-776-8166
Socket Wren Adapter

5120-99-913-1482

5120-99-754-3661
Valve Lapping Tool

5120-99-250-8273
Torque Wrench

992508273
1-ST-01: RNCC: 3 | RNVC: 2

27 Mar 2003

5120-99-803-0263
Car Or T Tyre Lever

998030263
TL45: RNCC: 3 | RNVC: 2
TL450: RNCC: 5 | RNVC: 2
LV6MT2-45447: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-235-6476
Jack

992356476
LJ0086: RNCC: 3 | RNVC: 2
FL001JP0094: RNCC: 6 | RNVC: 9

12 Jan 2001

5120-99-136-7224
Refri Wrench Socket

991367224
DRX375: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-779-9266
Holding Tool

997799266
33 35742: RNCC: 3 | RNVC: 2

21 Jan 1993

5120-99-414-3895
Key Spanner

994143895
NO PRIMARY REF 99-414-3895: RNCC: 3 | RNVC: 2
ST1669: RNCC: 5 | RNVC: 9
27Q12302: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-456-0360
Pliers

994560360
AM11293: RNCC: 3 | RNVC: 2
27A3285: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-248-4304
Removal Tool

992484304
3562/TOOL: RNCC: 3 | RNVC: 2

14 Jul 2003

5120-99-209-7852
Wing Nut

992097852
D251-055: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-411-9086
Dummy Push Rod

994119086
NO PRIMARY REF 99-411-9086: RNCC: 3 | RNVC: 2
ST298: RNCC: 5 | RNVC: 9
27Q6086: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-432-4407
Key Spanner

994324407
NO PRIMARY REF 99-432-4407: RNCC: 3 | RNVC: 2
43-56978: RNCC: 5 | RNVC: 2
88870-363-183: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-962-9834
Ratchet Wrench

999629834
D0NW8672-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-208-3309
Foot Plate Adjustin

992083309
SLA2168: RNCC: 3 | RNVC: 2
4Q3488: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-149-8903
Elec Strapping Tool

991498903
TYTON 300A: RNCC: 3 | RNVC: 2

16 Dec 2004

5120-99-562-7608
Socket Wrench Adapter

995627608
M13484: RNCC: 3 | RNVC: 2

17 Feb 1993

5120-99-895-1836

5120-99-789-7604
Handle

997897604
460009148 DETAIL 7: RNCC: 3 | RNVC: 2
460009148-7: RNCC: 5 | RNVC: 2

28 Aug 1991

5120-99-000-5866
Seal Inserter

990005866
MC1248421: RNCC: 3 | RNVC: 2

27 Jan 2011

5120-99-712-0691
Fixed Open End Wrench Set

997120691
A1040: RNCC: 3 | RNVC: 1
A3168: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-120-4488
Open End Wrench

991204488
1REFDWGGP261: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-241-6080
Socket Wrench Socket

992416080
460003548: RNCC: 3 | RNVC: 2

5 Jun 2002

5120-99-129-4726

5120-99-075-3028

5120-99-146-0060
Torque Wrench Adapter

991460060
029220: RNCC: 3 | RNVC: 2
91635520: RNCC: 5 | RNVC: 2
EX250B3: RNCC: 5 | RNVC: 2
EX250B3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-297-8560
Replacer

992978560
PD214: RNCC: 3 | RNVC: 2
CV134428: RNCC: 5 | RNVC: 2
21825623: RNCC: 5 | RNVC: 2

13 Apr 2011

5120-99-957-5009
Socket Wrench Crowfoot Attachment

999575009
EBC625: RNCC: 3 | RNVC: 2
1L320: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-716-4712

5120-99-836-7406
Drop Arm Extractor

998367406
RG59A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-938-1843
Cuff Slide Hammer

999381843
W20043A01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-4663
Hand Hammer

999104663
H1215: RNCC: 3 | RNVC: 2
FA14158: RNCC: 6 | RNVC: 9
1B4294: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6556
Rivet Tongs

999106556
H2786: RNCC: 2 | RNVC: 2

25 Apr 1991

5120-99-931-5331
Combination Spanner

5120-99-923-8180

5120-99-923-8132
Spanner Wrench

5120-99-924-5786

5120-99-923-8126
Spanner Wrench

5120-99-895-4394

5120-99-867-5578

5120-99-957-8893
Main Bearing Tool

999578893
317-50101: RNCC: 3 | RNVC: 2

26 Sep 2002

5120-99-739-5765
Stud Driver

997395765
VT11740: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-775-6497
Bearing And Bushing Driver Plug

997756497
460009421-4D: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-560-1345
Drive Pin Punch

995601345
BDC4325: RNCC: 3 | RNVC: 2

10 Aug 1981

5120-99-910-6008
Open End Wrench

999106008
BS192-TABLE 2 1-1/4X1-7/16A/F: RNCC: 4 | RNVC: 1
2J125143: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5244: RNCC: 6 | RNVC: 9
TABLE I(E) 1-1/4X1-7/16A/F: RNCC: 6 | RNVC: 9
TABLE 2. 1 1/4 A/F X 1 7/16 A/F: RNCC: 6 | RNVC: 9
F1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6300
Open End Wrench

999106300
BS192-TABLE 1 32X35MM: RNCC: 4 | RNVC: 1
H21670: RNCC: 5 | RNVC: 2
TABLE I(D) 32X35MM: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4381: RNCC: 6 | RNVC: 9
TABLE 1. 32MM X 35MM: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5581
Drive Pin Punch

999105581
BS3066: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
H1917: RNCC: 6 | RNVC: 9
DL-9-A-H1917: RNCC: 6 | RNVC: 9
16005: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 33: RNCC: 6 | RNVC: 9
H1917: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-495-9372
Spanner Wrench

994959372
PP/J1019LB: RNCC: 3 | RNVC: 2
0625P-043: RNCC: 6 | RNVC: 9
062CE-022: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-659-6921
Spanner Wrench

996596921
1849T407: RNCC: 3 | RNVC: 2
2159 T000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-627-7220
Ball Driver

5120-99-716-9354
Pulling Attachment

997169354
093500: RNCC: 3 | RNVC: 2
935: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-257-1067
Torque Wrench

992571067
015040: RNCC: 3 | RNVC: 2
015040: RNCC: 5 | RNVC: 2
91611309: RNCC: 5 | RNVC: 2
A64160: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-165-4061
Plain Flange

991654061
EB5305G506-115: RNCC: 3 | RNVC: 2
1MEVGTF: RNCC: 6 | RNVC: 9

18 Jul 2004

5120-99-244-8004
Piston Rod Spanner

5120-99-428-9676

5120-99-214-3123

5120-99-954-9321
Coil Break-Off Tool

999549321
XTB4: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

17 Dec 1980

5120-99-412-0530

5120-99-632-4302

5120-99-256-1861
Microcircu Inserter

5120-99-662-1726
Probe Passive Termi

996621726
P6021: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-230-5700
Spanner Wrench

992305700
9535-W202: RNCC: 3 | RNVC: 2

7 Feb 2006

5120-99-235-6599
Seal Remover

992356599
308-615: RNCC: 3 | RNVC: 2
308-615: RNCC: 5 | RNVC: 2

13 Dec 2011

5120-99-179-9412
Spatula

991799412
SF28944/9: RNCC: 3 | RNVC: 2
032SV-017: RNCC: 6 | RNVC: 9

28 Jul 2003

5120-99-251-0862
Mechanical Puller

992510862
1020: RNCC: 3 | RNVC: 1
1020: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-617-2311
Mechanical Puller

996172311
HU14632: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-983-9416
Clutch Alignin Tool

999839416
REME002576: RNCC: 3 | RNVC: 2
002576: RNCC: 5 | RNVC: 2
0484966: RNCC: 5 | RNVC: 2

10 Sep 1991

5120-99-977-3423
Socket Wrench

999773423
21-5133: RNCC: 3 | RNVC: 2
PR1362: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-3887
Mechanical Puller

997103887
PE8640: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-1814
Mechanical Puller

996171814
HU17439: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-104-2890
Socket Wrench

5120-99-618-2809
Socket Head Scr Key

5120-99-211-3386

5120-99-911-1675
Wrench Spanner

999111675
SF17182: RNCC: 3 | RNVC: 2
FL963440002: RNCC: 6 | RNVC: 9

12 Mar 1996

5120-99-422-3392
Torque Wrench

994223392
13010: RNCC: 3 | RNVC: 2
60: RNCC: 5 | RNVC: 2

19 Apr 2007

5120-99-376-1974
Fitting Tool

993761974
S12071: RNCC: 3 | RNVC: 2

16 Apr 2013

5120-99-135-5633

5120-99-794-8807
Lapping Tool

997948807
PE57966: RNCC: 3 | RNVC: 2

4 Mar 1985

5120-99-796-4286
Socket Wrench

997964286
PFH1010: RNCC: 3 | RNVC: 2

19 Feb 1986

5120-99-214-1117
Fi Open Jaw Spanner

992141117
GMB68200: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-259-6237
Closu Retainer Tool

992596237
PA1113-1135: RNCC: 3 | RNVC: 2

23 Sep 2002

5120-99-984-8437
Seal Inserter

999848437
T81-0006: RNCC: 3 | RNVC: 2

25 Apr 2012

5120-99-905-2152
Handbr Release Tool

999052152
206-090: RNCC: 3 | RNVC: 2
LRT-70-002: RNCC: 5 | RNVC: 9

19 Jan 2010

5120-99-955-6277
Tang Breakoff Tool

999556277
NO PRIMARY REF 99-955-6277: RNCC: 3 | RNVC: 2
85-119-19-10-1733: RNCC: 5 | RNVC: 2
MBATB6: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-943-0537
Sc Handle Operating

999430537
NO PRIMARY REF 99-943-0537: RNCC: 3 | RNVC: 2
1695: RNCC: 5 | RNVC: 2
184: RNCC: 5 | RNVC: 2
LV6MT1LE34567: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-580-5391
Screw Thread Insert Inserter

995805391
A29-2: RNCC: 3 | RNVC: 2
H21464: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-843-6172

5120-99-144-6031
Spanner Wrench

991446031
ST2925: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-826-8470

5120-99-984-7710
Socket Wrench Set

999847710
WG1388-3269-041: RNCC: 3 | RNVC: 2
001SF-022: RNCC: 6 | RNVC: 9

31 Aug 2000

5120-99-551-2991
Key

995512991
06806-040: RNCC: 3 | RNVC: 2

18 Jan 2005

5120-99-290-6217
Jackscrew Assembly

992906217
EA6305G638-045: RNCC: 3 | RNVC: 2

16 Apr 2004

5120-99-633-1428
Spanner Wrench

996331428
703-18A5114: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-869-3581
Single Screwdriver

998693581
1-171: RNCC: 3 | RNVC: 2

11 Aug 1995

5120-99-869-3585
Double Screwdriver

998693585
1-176: RNCC: 3 | RNVC: 2

14 Aug 1995

5120-99-131-1871
Hand Hydraulic Jack

991311871
630: RNCC: 3 | RNVC: 2
630: RNCC: 5 | RNVC: 2
630: RNCC: 5 | RNVC: 2

13 Oct 1997

5120-99-666-2751
Spanner Wrench

996662751
7R-9638646: RNCC: 3 | RNVC: 2

6 Oct 2004

5120-99-366-5314
Torque Wrench Adapter

993665314
DAE7423GSE: RNCC: 3 | RNVC: 2

27 Jul 1999

5120-99-144-6129
Drive Pin Punch

991446129
460001603: RNCC: 3 | RNVC: 2
460001603: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-889-0623

5120-99-906-3594

5120-99-154-5148

5120-99-957-9150
Mandrel

999579150
39267: RNCC: 3 | RNVC: 2
030470080: RNCC: 6 | RNVC: 9

22 Jan 2003

5120-99-836-5401
Torque Wrench Adapter

998365401
DRT 68169: RNCC: 3 | RNVC: 2

3 Jun 2009

5120-99-970-7326
Electronic Equipment Alignment Tool

999707326
3041A0530: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-604-2418
Main Bearing Tool

996042418
393235: RNCC: 3 | RNVC: 2

26 Sep 2002

5120-99-104-8666
Stud Setter

991048666
FB154227: RNCC: 3 | RNVC: 2
M154227: RNCC: 5 | RNVC: 2
T185706: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-480-8135
Combination Box And Open End Wrench

994808135
40.17: RNCC: 3 | RNVC: 2
G3 400 103 8108DT: RNCC: 5 | RNVC: 2

19 Apr 2006

5120-99-607-1973
Rigging Pin

996071973
HU5719: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-3008

5120-99-122-8414

5120-99-614-8520

5120-99-607-6120
Bearing And Driver

996076120
T591430: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-257-3945
Peg Spanner

992573945
MBEU74326: RNCC: 3 | RNVC: 2
B-MBEU74326: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-810-0400
Tool Holder

998100400
HU28069: RNCC: 3 | RNVC: 2
000RN-90: RNCC: 6 | RNVC: 9

17 Apr 2000

5120-99-812-1919
Open End Wrench

998121919
074.019.00: RNCC: 3 | RNVC: 2

13 May 1998

5120-99-383-9922
Spanner Tube

993839922
2892T403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-818-2902
Torque Wrench Adapter

998182902
DRT 68204: RNCC: 3 | RNVC: 2

3 Jun 2009

5120-99-814-8254
Box Wrench

998148254
FV 38901: RNCC: 3 | RNVC: 2
LV9AHYFV38901: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-148-0121
Combination Box And Open End Wrench Set

991480121
NO PRIMARY REF 99-148-0121: RNCC: 3 | RNVC: 2
RS536-644: RNCC: 5 | RNVC: 2
WC1003: RNCC: 5 | RNVC: 2
536-644: RNCC: 5 | RNVC: 2

12 Jul 2007

5120-99-721-0605
Extension Socket

997210605
NO PRIMARY REF 99-721-0605: RNCC: 3 | RNVC: 2
HW12353: RNCC: 5 | RNVC: 2
85-690-1336: RNCC: 6 | RNVC: 9

15 Jul 1981

5120-99-745-9373
Spanner Wrench

997459373
T5251-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-3792
Face Spanner Wrench Socket

996553792
CHA754-167-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-820-6360
Extractor Reaction

998206360
PP/J1040LB: RNCC: 3 | RNVC: 2
062KT-096: RNCC: 6 | RNVC: 9
0625P-105: RNCC: 6 | RNVC: 9

23 May 2006

5120-99-541-1732
Open End Wrench

995411732
Y192: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-423-8227
Socket Wrench

994238227
9028-8: RNCC: 3 | RNVC: 2
558340: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-234-3506
Reamer Bush

992343506
R.2659: RNCC: 3 | RNVC: 2
3AP5206: RNCC: 6 | RNVC: 9

10 Aug 1993

5120-99-732-6382
Tool Assembly

997326382
NO PRIMARY REF 99-732-6382: RNCC: 3 | RNVC: 2
2370619: RNCC: 5 | RNVC: 2
C553-LLM989847: RNCC: 6 | RNVC: 9

20 Jun 2001

5120-99-539-4652
Box Wrench

995394652
X99-7214: RNCC: 3 | RNVC: 2
99-7214: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-766-9596
Hydraulic Jack Handle

997669596
LE21455: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-772-9677
Sleeve

997729677
101A505143-6: RNCC: 3 | RNVC: 2
101A505143DETA1L6: RNCC: 5 | RNVC: 2
101A505143-6: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-721-9264
Bolt

997219264
460009231-3: RNCC: 3 | RNVC: 2
460009231DETAIL3: RNCC: 6 | RNVC: 9

2 Sep 1989

5120-99-420-4140

5120-99-539-2231
Torsion Bar Adaptor

995392231
A690749: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-607-6354
Mechanical Puller

996076354
S3S11576000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-419-5088
Hand Melting Ladle

994195088
CHC315: RNCC: 3 | RNVC: 1
0262-468: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-406-2523
Turnlock Fastener Clinching Punch

994062523
A6TOOL1: RNCC: 3 | RNVC: 2
28FP420: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-654-4018
Bearing And Bushing Driver Plug

996544018
460009161B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-778-1085
Socket Wrench

5120-99-812-3864

5120-99-546-6107
Box Wrench

995466107
3029094: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-531-2059
Plu Extraction Tool

995312059
MP5229: RNCC: 3 | RNVC: 2
3BK507796: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-667-4167
Hand Hammer

996674167
NO PRIMARY REF 99-667-4167: RNCC: 3 | RNVC: 2
20088: RNCC: 5 | RNVC: 2

8 Jun 2004

5120-99-810-2038
Sock Ratchet Handle

998102038
NO PRIMARY REF 99-810-2038: RNCC: 3 | RNVC: 2
LV1BRC1073X61N: RNCC: 5 | RNVC: 2

12 Sep 1990

5120-99-874-2353

5120-99-953-0858

Load More Results