What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 79 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 79 of 108

5120-99-362-3534
Screwdriver Bit Set

993623534
TL-502-842: RNCC: 3 | RNVC: 2
TL-502-842: RNCC: 3 | RNVC: 9

28 Oct 2008

5120-99-471-1862
Box Wrench

994711862
P-892414-015: RNCC: 3 | RNVC: 2
P892414-015: RNCC: 5 | RNVC: 2

18 Jan 2001

5120-99-552-5514
Socket Wrench

995525514
11-23-3: RNCC: 3 | RNVC: 2
11-8623: RNCC: 5 | RNVC: 1
210-451031: RNCC: 6 | RNVC: 9
LE462D3: RNCC: 6 | RNVC: 9
H210-451031: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-146-2917
Bea Installing Tool

991462917
S6170-35402: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-349-6819
Lapping Tool

993496819
UX11674AR/RRA: RNCC: 3 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
F815 352076: RNCC: 6 | RNVC: 9

23 Apr 1996

5120-99-144-6060
Spanner Wrench

991446060
460001-682 PART 13: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-747-5648
Mechanical Puller

997475648
P-891137-405: RNCC: 3 | RNVC: 2
P891137-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-875-6601
Machinist's Scriber

998756601
EME70591-358-92: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-837-9158
Socket Wrench Screwdriver Attachment

998379158
KEN-582-6010K: RNCC: 3 | RNVC: 2
CV197549: RNCC: 5 | RNVC: 2

15 Feb 2013

5120-99-441-2946
Serving Mallet

994412946
A2/9890ITEM5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-965-4449
Ring Clamp Spanner

999654449
NO PRIMARY REF 99-965-4449: RNCC: 3 | RNVC: 2
008931: RNCC: 5 | RNVC: 2
0S5836A: RNCC: 5 | RNVC: 2

27 Jul 1981

5120-99-756-8828
Spanner Wrench

997568828
T7071-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-965-4837
Flat Po Screwdriver

999654837
86-53-601: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-525-8475
Spanner Wrench

995258475
1023-82-13: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-495-6322
Main Bearin Spanner

994956322
PC25486: RNCC: 3 | RNVC: 2
PC25486: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-666-3147
Socket Wrench Handle Bar

996663147
48417-A6/C: RNCC: 3 | RNVC: 2

26 Nov 2004

5120-99-799-6025
Spanner Wrench

997996025
104784001-AFT-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-0401
Crimping To Locator

991300401
604071-5: RNCC: 3 | RNVC: 2
1H385: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-884-6687
Hand Earth Boring Auger

998846687
16-T0005/A: RNCC: 3 | RNVC: 2

7 Sep 2007

5120-99-280-2292
Removal And In Tool

992802292
EA6205G026-041: RNCC: 3 | RNVC: 2

14 Jan 2000

5120-99-848-5054

5120-99-432-5232
Socket Head Screw Key

994325232
DWS437-12: RNCC: 3 | RNVC: 2
88621-618-853: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-3329

5120-99-120-3564

5120-99-610-0605
Guide

996100605
CH648-227: RNCC: 3 | RNVC: 2
CH648-024: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-823-6448
Ratchet Assembly

998236448
NO PRIMARY REF 99-823-6448: RNCC: 3 | RNVC: 2
FV714346: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-115-9626
Extractor Tool Asse

991159626
NO PRIMARY REF 99-115-9626: RNCC: 3 | RNVC: 2
JB5131: RNCC: 5 | RNVC: 2
DAS874147: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-105-0717
Gland Inserti Guide

991050717
NO PRIMARY REF 99-105-0717: RNCC: 3 | RNVC: 2
M60527: RNCC: 5 | RNVC: 2
CH60527: RNCC: 5 | RNVC: 2
CH60527: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-291-1470
Adjustable Wrench

992911470
111-999-008: RNCC: 3 | RNVC: 2
SNA 11: RNCC: 5 | RNVC: 2

11 May 2011

5120-99-994-9480
Locator

999949480
531425.0001: RNCC: 3 | RNVC: 2
3603-200-22-03: RNCC: 5 | RNVC: 2
531-425: RNCC: 5 | RNVC: 2

15 Feb 1994

5120-99-786-6121
Spanner Wrench

997866121
954-17844: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-741-8634
Socket Wrench Crowfoot Attachment

997418634
3201-85739-20-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-795-6121
Socket Wrench Assem

997956121
F500/21D: RNCC: 3 | RNVC: 2
F500/21D: RNCC: 5 | RNVC: 2

14 Sep 1989

5120-99-785-4716
Torque Wrench Adapter

997854716
904812-0111-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-757-6178
Face Spanner Wrench Socket

997576178
B408-26-001-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-763-8783
Spanner Wrench

997638783
T10013-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-277-6348
Bearing Tool

992776348
NO PRIMARY REF 99-277-6348: RNCC: 3 | RNVC: 2
MONT 28945: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-401-2374
The Withdrawal Tool

994012374
NO PRIMARY REF 99-401-2374: RNCC: 3 | RNVC: 2
352-533: RNCC: 5 | RNVC: 9
16C3356: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-428-5452
Spanner Wrench

994285452
HY270938: RNCC: 3 | RNVC: 2
100A504406: RNCC: 5 | RNVC: 2
A504406: RNCC: 5 | RNVC: 2
TA1209/002: RNCC: 6 | RNVC: 9

3 Aug 1998

5120-99-783-6715
Open End Wrench

997836715
NFL243: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-788-6778
Mechanical Puller

997886778
460009623D: RNCC: 3 | RNVC: 2

11 Aug 1988

5120-99-764-2242
Hydraulic Nut

997642242
HMV38: RNCC: 3 | RNVC: 2
HMV: RNCC: 5 | RNVC: 1

14 Jan 1992

5120-99-116-9554
Contact Extraction

991169554
575091: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-797-4083
Screwdriver Bit

997974083
99-77MMBP: RNCC: 3 | RNVC: 2
90/99-77MMBP: RNCC: 5 | RNVC: 2
142-183: RNCC: 5 | RNVC: 2
99-77MMBP: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-2219
Socket Wrench Crowfoot Attachment

991302219
1950M19MM: RNCC: 3 | RNVC: 2
1950M-19: RNCC: 5 | RNVC: 2
440-19: RNCC: 6 | RNVC: 9
10W50005: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-2588
Sleeve Puller

991302588
NO PRIMARY REF 99-130-2588: RNCC: 3 | RNVC: 2
216-68-00: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-411-9010
Flexi Charging Pipe

994119010
NO PRIMARY REF 99-411-9010: RNCC: 3 | RNVC: 2
ST2034: RNCC: 5 | RNVC: 9
W8WHDWST2034: RNCC: 6 | RNVC: 9
27Q14103: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-760-6730
Torque Wrench Adapter

997606730
FHQ6088/405: RNCC: 3 | RNVC: 2
FHQ6088-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-146-2905
Seal Installer

991462905
S6170-35119: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-2115
Retaining Ring Pliers

997822115
6546R-SEB: RNCC: 3 | RNVC: 2
H21274: RNCC: 5 | RNVC: 2

29 Jan 1987

5120-99-787-4433
Spanner Wrench

997874433
CHA748-1395: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-826-0892

5120-99-826-4225

5120-99-826-4362
Extractor Hydraul1c

5120-99-779-0815
Maintenance Sle Kit

5120-99-742-2895

5120-99-752-2142
Screwdriver Bit Set

5120-99-780-7038
Socket Spanner Atta

5120-99-778-5126
Box Wrench

5120-99-659-0087
Spanner Wrench

996590087
G9865018: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-415-5621

5120-99-425-0569

5120-99-282-2646
Torque Wren Adaptor

992822646
ET541699/6: RNCC: 3 | RNVC: 2

25 Sep 1990

5120-99-462-0466
Adjustable Spanner

994620466
211032: RNCC: 3 | RNVC: 2
701/6: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-1038
Combination Box And Open End Wrench

991241038
OEX18A: RNCC: 3 | RNVC: 2
CTA218: RNCC: 5 | RNVC: 2
RJ562: RNCC: 5 | RNVC: 2
1L350: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6445: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-720-9016
Locator Spares Kit

997209016
1-525326-1: RNCC: 3 | RNVC: 2

17 Dec 1991

5120-99-439-4459
Socket Wrench Socket Set

994394459
BS4006 PART 1: RNCC: 4 | RNVC: 1
SCHEDULE S0529: RNCC: 5 | RNVC: 2
F1FA17345: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-920-1648
Socket Wrench Socket

999201648
STMMD9 LOCK-ON: RNCC: 3 | RNVC: 2
XP98PC01266: RNCC: 6 | RNVC: 9

27 Mar 1998

5120-99-667-8511
Leatherworker's Modeling Tool

996678511
NO PRIMARY REF 99-667-8511: RNCC: 3 | RNVC: 2
FA0079: RNCC: 5 | RNVC: 2

26 Jan 2011

5120-99-708-8776
Seal Guide

997088776
8090-798-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-746-9524
Expander Assembly

997469524
OA0420-087: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-659-6927
Bearing And Bushing Driver

996596927
T4243-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-4458
Open End Wrench

996554458
A4RLSKA95000-157-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-936-7653
Socket

999367653
NO PRIMARY REF 99-936-7653: RNCC: 3 | RNVC: 2
3070860: RNCC: 5 | RNVC: 2
C581-LWM023399: RNCC: 6 | RNVC: 9

20 Jun 2001

5120-99-755-6874
Bar Scriber

997556874
NO PRIMARY REF 99-755-6874: RNCC: 3 | RNVC: 2
11130: RNCC: 5 | RNVC: 2

4 Mar 1993

5120-99-422-4651
Drive Pin Punch

994224651
N38432-4: RNCC: 3 | RNVC: 2
88604-606-080: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-016-8645
Face Spanner Wrench Socket

990168645
85/119/19/10/1044: RNCC: 3 | RNVC: 2
ES114A3A: RNCC: 6 | RNVC: 9

22 Jun 1995

5120-99-782-1116
Open End Wrench

997821116
H20251: RNCC: 1 | RNVC: 2
04-0090-9: RNCC: 3 | RNVC: 2
5J3241: RNCC: 3 | RNVC: 2
5J3241: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-902-2411
Hinge Pin Extractor

999022411
S14-94-0307 51/1: RNCC: 3 | RNVC: 2

6 Apr 1994

5120-99-538-6391
Stand Assembly

995386391
NO PRIMARY REF 99-538-6391: RNCC: 3 | RNVC: 2
F45242: RNCC: 5 | RNVC: 2
DF45242: RNCC: 5 | RNVC: 2
H454-538-6391: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-748-4091
Tool Assembly

997484091
EA6505G521-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-136-6616
Screw Thread Insert Inserter

991366616
ST1126: RNCC: 3 | RNVC: 2
DEFSTAN51-17: RNCC: 4 | RNVC: 1
M1P103: RNCC: 5 | RNVC: 2
1B: RNCC: 6 | RNVC: 9
SR1281: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-3016
Axle Worm Extractor

994013016
NO PRIMARY REF 99-401-3016: RNCC: 3 | RNVC: 2
ET137: RNCC: 5 | RNVC: 2
16C3874: RNCC: 6 | RNVC: 9

12 Jul 1979

5120-99-654-4193
Drift

996544193
460009196D: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-120-9522
Socket Wrench Socket

991209522
1209522: RNCC: 3 | RNVC: 2
1L1209522: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-655-1717
Mechanical Puller

996551717
P-890399-405: RNCC: 3 | RNVC: 2
P890399-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-622-3778
Ring Nut Tool

996223778
EA6305G564-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-422-5662
Socket Wrench Handle Bar

994225662
N0D2107-82DET7: RNCC: 3 | RNVC: 2
121007: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-655-3825
Mechanical Puller

996553825
CHA754-337-405: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-701-0214
Socket Wrench Handle

997010214
PA1113-3181: RNCC: 3 | RNVC: 2
023SE-011: RNCC: 6 | RNVC: 9
023UQ-0041: RNCC: 6 | RNVC: 9

3 Dec 2002

5120-99-401-2693
Shackle Pin Spanner

994012693
18G312: RNCC: 3 | RNVC: 2
16C6060: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-386-6573
Gap Gauge

993866573
10AP61887: RNCC: 3 | RNVC: 2
118448ST: RNCC: 6 | RNVC: 9

13 Mar 1990

5120-99-718-6668
Removal Tool

997186668
WD4188-00851-101: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-99-910-5410
Hand Melting Ladle

999105410
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H5331: RNCC: 6 | RNVC: 9
H5331: RNCC: 6 | RNVC: 9
FA14981: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-3691
Open End Wrench

991353691
5JM324: RNCC: 3 | RNVC: 2
BS192-TABLE 1 3.20X4MM: RNCC: 4 | RNVC: 1
DEF STAN 51-11 PART 1: RNCC: 4 | RNVC: 1
181616D: RNCC: 5 | RNVC: 2
600206: RNCC: 5 | RNVC: 2
E600206: RNCC: 5 | RNVC: 2
TABLE I(D) 3.20X4MM: RNCC: 6 | RNVC: 9
TABLE 1. 3.2MM X 4MM: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-761-3739
Open End Wrench

997613739
P461ZS1029/7: RNCC: 3 | RNVC: 2
H727-460370: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-290-6250
Retaining Ring Pliers

992906250
BA-0405: RNCC: 3 | RNVC: 2
MISC44/A: RNCC: 5 | RNVC: 2

6 Aug 2004

5120-99-219-6888
Spanner Wrench

992196888
PT859838: RNCC: 3 | RNVC: 2
0625P-188: RNCC: 6 | RNVC: 9
062CE-064: RNCC: 6 | RNVC: 9

18 May 2006

5120-99-825-5482
Stage Lifting Clamp

998255482
NO PRIMARY REF 99-825-5482: RNCC: 3 | RNVC: 2
V1380-11: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-981-0358
Precompression Tool

999810358
S1006265: RNCC: 3 | RNVC: 2
730/08/13-22: RNCC: 6 | RNVC: 9

11 Oct 2005

5120-99-776-9728

5120-99-943-5738

5120-99-952-4285

5120-99-643-9093
Ring Sealing Tool

996439093
NO PRIMARY REF 99-643-9093: RNCC: 3 | RNVC: 2
JC2890: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-332-5394
Spanner Wrench

993325394
23-25887: RNCC: 3 | RNVC: 2
867-325394: RNCC: 6 | RNVC: 9
41AD35: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-869-3592
Wrench Ke Extension

998693592
5190-06-EXTENSION: RNCC: 3 | RNVC: 2

11 Aug 1995

5120-99-612-7958
Mechanical Puller

996127958
121E-93-815-002: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-461-5909
Pincers

994615909
NO PRIMARY REF 99-461-5909: RNCC: 3 | RNVC: 2
0434-1866: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-367-1858
Socket Wrench Extension

993671858
NO PRIMARY REF 99-367-1858: RNCC: 3 | RNVC: 2
27557: RNCC: 5 | RNVC: 2

11 Jun 2004

5120-99-411-9067
Screwdriver

994119067
NO PRIMARY REF 99-411-9067: RNCC: 3 | RNVC: 2
ST729: RNCC: 5 | RNVC: 9
27Q6645: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-899-7063
Socket Head Screw Key

998997063
NO PRIMARY REF 99-899-7063: RNCC: 3 | RNVC: 2
4671140: RNCC: 5 | RNVC: 2

15 Dec 2009

5120-99-599-0232
Handle

995990232
3990/51809: RNCC: 3 | RNVC: 2
C3990/51809: RNCC: 5 | RNVC: 2

23 Feb 2000

5120-99-957-5336
Temperat Reset Tool

999575336
NO PRIMARY REF 99-957-5336: RNCC: 3 | RNVC: 2
291R100749: RNCC: 5 | RNVC: 2

20 Oct 2000

5120-99-888-3246
Hand Blind Riveter

998883246
7166-0051: RNCC: 3 | RNVC: 2
7166-0051: RNCC: 5 | RNVC: 2

17 Sep 1991

5120-99-964-8555
Removing Tool

999648555
PA577-313: RNCC: 3 | RNVC: 2
362318: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-363-9867
Bore Alignment Tool

993639867
311-AT-515: RNCC: 3 | RNVC: 2

13 Nov 1991

5120-99-891-0352
Displacement Tools

998910352
NO PRIMARY REF 99-891-0352: RNCC: 3 | RNVC: 2
0308J0220: RNCC: 5 | RNVC: 2

19 Mar 2003

5120-99-760-1075
Face Spanner Wrench Socket

997601075
T10092-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-764-6459
Pliers

997646459
NO PRIMARY REF 99-764-6459: RNCC: 3 | RNVC: 2
572-527: RNCC: 5 | RNVC: 2

3 Feb 2000

5120-99-865-7165
Digging Pic Bracket

998657165
NO PRIMARY REF 99-865-7165: RNCC: 3 | RNVC: 2
FV538158: RNCC: 5 | RNVC: 2
LV9ACRFV538158: RNCC: 6 | RNVC: 9

24 May 1977

5120-99-760-6693
Torque Wrench Adapter

997606693
PM3371-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-762-9003
Int Insertion Tool

997629003
M0S-2428: RNCC: 3 | RNVC: 2

10 Oct 1983

5120-99-957-9245
Clamping Tool

999579245
NO PRIMARY REF 99-957-9245: RNCC: 3 | RNVC: 2
023JZ0040: RNCC: 5 | RNVC: 2

17 Mar 2003

5120-99-747-6328
Swage Head

997476328
D12906-56: RNCC: 3 | RNVC: 2
D1290656: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-431-7650
Tilt Valve Fit Tool

994317650
NO PRIMARY REF 99-431-7650: RNCC: 3 | RNVC: 2
DP2674: RNCC: 5 | RNVC: 2
0435-8069: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-466-0035
Nipple

994660035
NO PRIMARY REF 99-466-0035: RNCC: 3 | RNVC: 2
673NA3: RNCC: 5 | RNVC: 2
1B2919: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-662-1737
Extraction Tool Hel

996621737
1227-06: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-714-7072
Prop Ret Nu Spanner

5120-99-946-3602

5120-99-953-4774

5120-99-953-4793

5120-99-773-0718
Wiper Assembly Die

5120-99-607-3565
Mechanical Puller

996073565
HU19991-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-137-2663
Pipe Wrench

991372663
187-280: RNCC: 3 | RNVC: 2
5010559237593: RNCC: 5 | RNVC: 2
23759: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-553-2873
Torque Wrench

995532873
W5712-112: RNCC: 3 | RNVC: 2

3 Jul 1998

5120-99-138-6839
Combination Box And Open End Wrench

991386839
RJM12: RNCC: 3 | RNVC: 2
436-9218: RNCC: 5 | RNVC: 2
55-1065: RNCC: 5 | RNVC: 2
436-9218: RNCC: 5 | RNVC: 2
1C1386839: RNCC: 6 | RNVC: 9
99-133-5942: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-149-9574
Combination Box And Open End Wrench

991499574
TME414: RNCC: 3 | RNVC: 2

2 Apr 2009

5120-99-411-9098
Clamp Vice

994119098
NO PRIMARY REF 99-411-9098: RNCC: 3 | RNVC: 2
ST1214: RNCC: 5 | RNVC: 2
ST1214: RNCC: 5 | RNVC: 9
27Q12289: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-721-4883
Torque Wrench Adapter

997214883
029200: RNCC: 3 | RNVC: 2
4P223831: RNCC: 5 | RNVC: 2
EX-250-B2: RNCC: 5 | RNVC: 2

27 Apr 1993

5120-99-466-2020
Extractor

994662020
NO PRIMARY REF 99-466-2020: RNCC: 3 | RNVC: 2
5P3827: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-983-0616
Screw Thread Insert Tang Breakoff Tool

999830616
TBO-50: RNCC: 3 | RNVC: 2
1MEV68A: RNCC: 6 | RNVC: 9

9 Mar 2000

5120-99-120-9225
Mandrel

991209225
7150-6004: RNCC: 3 | RNVC: 2
1172: RNCC: 5 | RNVC: 2
3AP2873: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-840-0384
Mechanical Puller

998400384
NO PRIMARY REF 99-840-0384: RNCC: 3 | RNVC: 2
245260: RNCC: 5 | RNVC: 2
LV7LD245260: RNCC: 6 | RNVC: 9
16C5207: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-788-5016
Wrench Spanner

997885016
38731-105: RNCC: 3 | RNVC: 2
T103: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-554-0947
Ratchet Wrench

995540947
B5775-13C: RNCC: 3 | RNVC: 2
B57751TEM13C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-630-6996
Socket Wrench Screwdriver Attachment

996306996
D33-4M: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-950-6967
Open End Wrench

999506967
0DW216: RNCC: 3 | RNVC: 2
A55032-584: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5430
Heaving Mallet

999105430
NO PRIMARY REF 99-910-5430: RNCC: 3 | RNVC: 2
C00RDPATH1587: RNCC: 5 | RNVC: 2
1B1551: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-2005
Socket Spanner

998102005
NO PRIMARY REF 99-810-2005: RNCC: 3 | RNVC: 2
LV1BRC1907: RNCC: 5 | RNVC: 2

19 Aug 1980

5120-99-741-3093
Socket Head Scr Key

997413093
U253-100-000: RNCC: 3 | RNVC: 2

9 Apr 2002

5120-99-769-8968
Socket Spanner Atta

997698968
E2UBA: RNCC: 3 | RNVC: 2
TK-209-1468: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-434-7139
Copper Tubin Bender

994347139
NO PRIMARY REF 99-434-7139: RNCC: 3 | RNVC: 2
F1FA10183: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-347-0215
Slave Rod Assembly

993470215
EA6705G539-041: RNCC: 3 | RNVC: 2

10 Apr 2004

5120-99-430-9429
Socket Head Scr Key

994309429
NO PRIMARY REF 99-430-9429: RNCC: 3 | RNVC: 2
DWS3672G: RNCC: 5 | RNVC: 2
88300-305-372: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-553-6497
Spanner Wrench

995536497
SGE3210-3200: RNCC: 3 | RNVC: 2

29 May 2012

5120-99-391-1849
Electrical Contact Inserter

993911849
NO PRIMARY REF 99-391-1849: RNCC: 3 | RNVC: 2
TW2300 DUAL: RNCC: 5 | RNVC: 2
TW2300D: RNCC: 5 | RNVC: 2

2 Oct 2004

5120-99-851-4625
De-Linking Tool

998514625
NO PRIMARY REF 99-851-4625: RNCC: 3 | RNVC: 2
8C2474: RNCC: 5 | RNVC: 2

26 Jul 2005

5120-99-392-8918
Clutch Alignme Plug

993928918
CP13736/1: RNCC: 3 | RNVC: 2
CP13736: RNCC: 5 | RNVC: 2
118266ST: RNCC: 6 | RNVC: 9

8 Mar 1990

5120-99-714-3425
Blind Riveter Jaws

997143425
7160-0205: RNCC: 3 | RNVC: 2
7160-0205: RNCC: 5 | RNVC: 2
37G16-1: RNCC: 5 | RNVC: 2
37G16-1: RNCC: 5 | RNVC: 2
7160-0205: RNCC: 5 | RNVC: 9
1C8235: RNCC: 6 | RNVC: 9
85-670-7103: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-580-5273
Screw Thread Insert Extractor

995805273
1227-6: RNCC: 3 | RNVC: 2
DEFSTAN51-17: RNCC: 4 | RNVC: 1
H02889: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
1F: RNCC: 6 | RNVC: 9
601147: RNCC: 6 | RNVC: 9
88620-617-302: RNCC: 6 | RNVC: 9
1C6986: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-1957
Torque Wrench Adapter

991301957
SSD1/4PL: RNCC: 3 | RNVC: 2
SSD1/4PL: RNCC: 5 | RNVC: 2
SSD 1/4" LOCK-ON: RNCC: 5 | RNVC: 2
SD-1/4(PL): RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-362-7842
Socket Wrench Spanner Attachment

993627842
A2/9102/5256.2: RNCC: 3 | RNVC: 2
9102/5256.2: RNCC: 5 | RNVC: 2

8 Jul 1994

5120-99-662-8431
Socket Head Screw Key

996628431
625/1/04217/000: RNCC: 3 | RNVC: 2
MNT302947: RNCC: 5 | RNVC: 2
625/GA/04217/000: RNCC: 5 | RNVC: 2
UW214C: RNCC: 6 | RNVC: 9

12 Oct 1995

5120-99-021-9339
Spanner Wrench

990219339
340-614-4000-01: RNCC: 3 | RNVC: 2
SM765A: RNCC: 6 | RNVC: 9

12 Dec 1996

5120-99-562-8227
Hand Caulking Tool

995628227
NO PRIMARY REF 99-562-8227: RNCC: 3 | RNVC: 2
VTR631/PN2534: RNCC: 5 | RNVC: 2

13 Jan 2011

5120-99-981-3611
Installation Tool

999813611
182/05867: RNCC: 3 | RNVC: 2
182/05867: RNCC: 5 | RNVC: 2
SM765A: RNCC: 6 | RNVC: 9

17 Feb 2000

5120-99-778-9505
Mechanical Puller

997789505
WG0039-0115-045W142-A03: RNCC: 3 | RNVC: 2
WG1388-5002-041: RNCC: 5 | RNVC: 2
85-690-2028: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-769-7623
Half Ring

997697623
EA6705G565-119: RNCC: 3 | RNVC: 2
1MEVGEK: RNCC: 6 | RNVC: 9

10 Apr 2004

5120-99-659-6716
Spanner Wrench

996596716
48415 A55/407: RNCC: 3 | RNVC: 2
48415A55-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-552-6543
Box Wrench

995526543
76-8623: RNCC: 3 | RNVC: 2
210-451073: RNCC: 6 | RNVC: 9
210-958419: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-418-4843
Bearing And Remover

994184843
NO PRIMARY REF 99-418-4843: RNCC: 3 | RNVC: 2
WB5-88-137: RNCC: 5 | RNVC: 9
26WX95057: RNCC: 6 | RNVC: 9

3 Sep 1973

5120-99-434-7212
Tap Extractor

994347212
NO PRIMARY REF 99-434-7212: RNCC: 3 | RNVC: 2
F1FA13215: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-252-4826
Screwdriver Bit

992524826
49-B-TX-20: RNCC: 3 | RNVC: 2
ET541699/2: RNCC: 5 | RNVC: 2
49-B-TX-20: RNCC: 6 | RNVC: 9
1C/8651: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-6868
Coupling

998106868
NO PRIMARY REF 99-810-6868: RNCC: 3 | RNVC: 2
7M9774: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-299-9074
Machinist's Scriber

992999074
EME70574-358-109: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-9378
Open End Wrench

5120-99-467-6809
Driftpin

994676809
ST1844: RNCC: 3 | RNVC: 2
27Q13778: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-7789
Pr Withdrawing Tool

994547789
NO PRIMARY REF 99-454-7789: RNCC: 3 | RNVC: 2
MDSK858-137: RNCC: 5 | RNVC: 2
721838: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-858-0723
Spanner

998580723
W 5703 806 AC: RNCC: 3 | RNVC: 2

28 Jan 1999

5120-99-722-8216
Screen Remover

997228216
19-910.0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-818-7782
Pipe Flaring Tool

998187782
NO PRIMARY REF 99-818-7782: RNCC: 3 | RNVC: 2
230M: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-879-5165
Electrical Contact Inserter And Remover

998795165
MP601-HD: RNCC: 3 | RNVC: 2
012D3-004: RNCC: 6 | RNVC: 9

12 Sep 2001

5120-99-449-1009
Spanner

994491009
NO PRIMARY REF 99-449-1009: RNCC: 3 | RNVC: 2
9905-12: RNCC: 5 | RNVC: 2
88102-100-578: RNCC: 6 | RNVC: 9

31 Jan 1977

5120-99-398-1032
Drive Pin Punch

993981032
KEN-518-2423K: RNCC: 3 | RNVC: 2
CV172465D: RNCC: 5 | RNVC: 2

1 Nov 2010

5120-99-823-8429
Steering Gea Wrench

998238429
NO PRIMARY REF 99-823-8429: RNCC: 3 | RNVC: 2
V2071: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-721-2335
Mechanical Puller

997212335
A.13044-405: RNCC: 3 | RNVC: 2
A13044-405: RNCC: 5 | RNVC: 2

20 Aug 1990

5120-99-609-1669
Torque Key

996091669
NTS10903: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-794-4213
Socket Wrench Socket

997944213
STMM7: RNCC: 3 | RNVC: 2
STMMD7 LOCK-ON: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-539-9894
Torque Wrench

995399894
100147-8900: RNCC: 3 | RNVC: 2
TS80R: RNCC: 5 | RNVC: 1
100147-9000-067: RNCC: 5 | RNVC: 1
4287-002: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-629-8449
Torque Spanner

996298449
558-1-03470: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-301-2615
Seal Inserter

993012615
4A41-W8-127: RNCC: 3 | RNVC: 2
4A41W8-127: RNCC: 5 | RNVC: 2

3 Feb 1995

5120-99-759-5031
Tool Kit

997595031
M61/2-45-2: RNCC: 3 | RNVC: 2
M61/2-45-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-943-8610
S Stretching Pliers

999438610
TYPE S: RNCC: 3 | RNVC: 2
H21058: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H5620: RNCC: 6 | RNVC: 9
S: RNCC: 6 | RNVC: 9
LDN27368: RNCC: 6 | RNVC: 9
1C7020: RNCC: 6 | RNVC: 9
H5620: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-532-5470
Stuffing Box And Pump Packing Extractor

995325470
Z50881-1A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-718-3251
Crutch Adaptor Tool

997183251
AJJ6193-1236A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-858-1927
Tool Base

998581927
EA6405G524-105: RNCC: 3 | RNVC: 2

24 Oct 2008

5120-99-522-3236
Spanner

995223236
ST-1025-001: RNCC: 3 | RNVC: 2
FJ961MG0002: RNCC: 6 | RNVC: 9

30 Oct 1996

5120-99-124-3007

5120-99-145-1487

5120-99-782-6644

5120-99-736-0851
Ratchet Spanner

997360851
SSK/M/601/00/0001/222: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-0378
Electrical Ejector

991240378
CZ23295: RNCC: 3 | RNVC: 2
1H275: RNCC: 6 | RNVC: 9

8 Jul 1981

5120-99-726-4054
Socket Head Screw Key Set

997264054
H23167: RNCC: 1 | RNVC: 2
99PS-41MMBP: RNCC: 3 | RNVC: 2

9 Jan 1987

5120-99-828-6734
Cra Installing Tool

998286734
NO PRIMARY REF 99-828-6734: RNCC: 3 | RNVC: 2
VR2005: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-401-3863
Valve Lifter

994013863
276102: RNCC: 3 | RNVC: 2
16C5442: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-9411
Insert Tool

991369411
51-15-701: RNCC: 3 | RNVC: 2
51-00-700: RNCC: 5 | RNVC: 1
P105-03: RNCC: 5 | RNVC: 1
P105T00L03: RNCC: 5 | RNVC: 1
51-00-700 ITEM 3: RNCC: 5 | RNVC: 2
51-00-700/3: RNCC: 5 | RNVC: 2
H978-702483: RNCC: 6 | RNVC: 9
H978-702483: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-756-8823
Spanner Wrench

997568823
T.7062-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-414-1949
Hydra-Pack Cylinder

994141949
NO PRIMARY REF 99-414-1949: RNCC: 3 | RNVC: 2
WS15-70-10190-1: RNCC: 5 | RNVC: 9
26WX95019: RNCC: 6 | RNVC: 9
26WX95019: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-540-7535
Spanner Wrench

995407535
T.422: RNCC: 3 | RNVC: 2
H492-262864: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-321-1205
Spanner Wrench

993211205
MBEU179627: RNCC: 3 | RNVC: 2

24 Mar 2004

5120-99-901-2124
Com Spring Adjuster

999012124
NO PRIMARY REF 99-901-2124: RNCC: 3 | RNVC: 2
L14399A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-467-9203
Spanner Wrench

994679203
MT1519: RNCC: 3 | RNVC: 2
27Q27353: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-795-6474
Piston Ring

997956474
98477/1002: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-139-3058
Torque Wrench

991393058
NO PRIMARY REF 99-139-3058: RNCC: 3 | RNVC: 2
76-45: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-466-1039
Joint Universal

994661039
NO PRIMARY REF 99-466-1039: RNCC: 3 | RNVC: 2
AU687: RNCC: 5 | RNVC: 9
1L369: RNCC: 6 | RNVC: 9

19 Oct 1979

5120-99-105-7495

5120-99-329-3227
Adaptor

993293227
91-824-005-10: RNCC: 3 | RNVC: 2
020150 R1 DL00028: RNCC: 5 | RNVC: 2

26 Aug 2009

5120-99-588-1100
Clamp

5120-99-653-3864

5120-99-557-7814

5120-99-414-1946
Drainage Connection

5120-99-513-3990
Foot Hydraulic Pump

5120-99-204-2025

5120-99-750-0331
Socket Head Scr Key

5120-99-710-7334

5120-99-124-4762
Rubber Mallet

991244762
NO PRIMARY REF 99-124-4762: RNCC: 3 | RNVC: 2
435-230: RNCC: 5 | RNVC: 2

19 Mar 1990

5120-99-740-9703
Hand Terminal Crimping Tool

997409703
3274-200-19-01: RNCC: 3 | RNVC: 2
1B-6139: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-874-0493
Block Tool

998740493
EA6705G544-041: RNCC: 3 | RNVC: 2

10 Apr 2004

5120-99-840-0380
Mechanical Puller

998400380
NO PRIMARY REF 99-840-0380: RNCC: 3 | RNVC: 2
241554: RNCC: 5 | RNVC: 2
LV7LD241554: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-754-7757
Dolly.Positioning

997547757
S6170-15007: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-559-3114
Socket Head Screw Key

995593114
3333 A: RNCC: 3 | RNVC: 2
482-947554: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-609-4827
Hand Punch

996094827
PE54036: RNCC: 3 | RNVC: 2

27 Jul 1990

5120-99-466-6543
Assembly Post

994666543
ST1178: RNCC: 3 | RNVC: 2
27Q10308: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-269-4013
Socket Wrench Screwdriver Attachment

992694013
892/01299: RNCC: 3 | RNVC: 2

13 Aug 2012

5120-99-835-2324
Oil Filter Wrench

998352324
NO PRIMARY REF 99-835-2324: RNCC: 3 | RNVC: 2
539-457: RNCC: 5 | RNVC: 2
RS539-457: RNCC: 5 | RNVC: 2

12 Jul 2007

5120-99-831-1631
Oil Seal Remov Tool

998311631
21-010A: RNCC: 3 | RNVC: 2
21-010: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-786-3994
Open End Wrench

997863994
UCW 3089/33: RNCC: 3 | RNVC: 1
0279-15067: RNCC: 6 | RNVC: 9
15067: RNCC: 6 | RNVC: 9
AP 15067: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-131-5917
Screwdriver Bit Set

991315917
SGDMRC103-K: RNCC: 3 | RNVC: 2
0307X-161: RNCC: 6 | RNVC: 9
030EH-055: RNCC: 6 | RNVC: 9

27 Jan 2003

5120-99-120-4976
Hand Hammer

991204976
W 167-1LB: RNCC: 3 | RNVC: 2
DEF STAN51-11 (PART 31): RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-933-1566
Cable Grip

999331566
NO PRIMARY REF 99-933-1566: RNCC: 3 | RNVC: 2
90G109807-8: RNCC: 5 | RNVC: 2
29NADE11N0-301: RNCC: 5 | RNVC: 2
5315015: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-791-6785
Spanner Wrench

997916785
SSN11/W/581/00/305/2: RNCC: 3 | RNVC: 2
W/581/00/305/2: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-361-7576
Slide Hamme Adaptor

993617576
993/68105: RNCC: 3 | RNVC: 2
993/68100 ITEM 5: RNCC: 5 | RNVC: 2
993/68100/5: RNCC: 5 | RNVC: 2
FH9643Z0064: RNCC: 6 | RNVC: 9

4 May 1996

5120-99-869-3607
Nut Spinner Blade

998693607
5490-06-SOCKET 5.5MM: RNCC: 3 | RNVC: 2

22 Aug 1995

5120-99-676-4136
Slip Gauge 1.44

996764136
AITG-1751-A4: RNCC: 3 | RNVC: 2

19 Oct 2000

5120-99-852-5569
Screwdriver Bit

998525569
2399-100-001: RNCC: 3 | RNVC: 2
445-20: RNCC: 6 | RNVC: 9

27 Feb 1996

5120-99-830-8937
Flange;Slide Hammer

998308937
15-011-02: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-180-5796
Armature Clip

991805796
100016/9005/539/DL ISS 1: RNCC: 3 | RNVC: 2

28 Mar 1992

5120-99-450-0784
Ic Test Clip

994500784
103-957: RNCC: 3 | RNVC: 2
34-9426: RNCC: 5 | RNVC: 2

6 Mar 1992

5120-99-422-4588
Spanner Wrench

994224588
N37270-5: RNCC: 3 | RNVC: 2
88604-606-017: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-372-8943
Spanner Wrench

993728943
PA1113-3159: RNCC: 3 | RNVC: 2
020IT-036: RNCC: 6 | RNVC: 9

26 Feb 2002

5120-99-655-3682
Mechanical Puller

996553682
CHA755-039-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-4955
Hand Hammer

991224955
KW130: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-776-3402

5120-99-700-7071

5120-99-744-1739
Flatpoi Screwdriver

5120-99-642-1658
Repair Kit

5120-99-813-9804
Swivel Race Socket

5120-99-477-2825
Torque Wrench

5120-99-715-1530

5120-99-783-6736

5120-99-607-5524
Posit Tool Assembly

996075524
NO PRIMARY REF 99-607-5524: RNCC: 3 | RNVC: 2
PE3868: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-910-5596
Blacksmith's Punch

999105596
DL-9-A-H1953: RNCC: 2 | RNVC: 2
DL-9-A: RNCC: 5 | RNVC: 2
H1953: RNCC: 6 | RNVC: 9
FA16020: RNCC: 6 | RNVC: 9
9105596: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-153-0329
Spanner Wrench

991530329
150607166: RNCC: 3 | RNVC: 2
89532833: RNCC: 5 | RNVC: 2

26 Mar 2012

5120-99-144-6036
Spanner Wrench

991446036
460001-682 PART 19: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-400-1793
Adapter.Torque

994001793
SAM20290: RNCC: 3 | RNVC: 2

2 Aug 2002

5120-99-497-2301
Spanner Kit

994972301
NO PRIMARY REF 99-497-2301: RNCC: 3 | RNVC: 2
A3460/01TC21417ND: RNCC: 5 | RNVC: 2
4MA-4727001: RNCC: 6 | RNVC: 9

17 Jul 2002

5120-99-641-9729

5120-99-120-9773
Socket Spanner Tip

5120-99-120-9870

5120-99-944-9130

5120-99-953-4368

5120-99-813-9826
Spanner Wrench

5120-99-813-9808
Spanner Wrench

5120-99-733-7924

5120-99-710-6604
Claw Spanner

5120-99-825-6487
Piston Removal Tool

998256487
FV824877: RNCC: 3 | RNVC: 2

24 Aug 1977

5120-99-787-2268
Seal Installer

997872268
16-018: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-332-3111
Drain Plug Wrench

993323111
FP1519: RNCC: 3 | RNVC: 2
FP1519A: RNCC: 6 | RNVC: 9
FP1519B: RNCC: 6 | RNVC: 9
W20FODEN609: RNCC: 6 | RNVC: 9
420-323111: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-168-9089
Contact Extrac Tool

991689089
3473-10703-40-4: RNCC: 3 | RNVC: 2
839 S 004: RNCC: 5 | RNVC: 2

10 Nov 1994

5120-99-910-6214
Socket Wrench

999106214
DEF STAN 51-11 PART 3: RNCC: 4 | RNVC: 1
BS2558-TABLE 4 3/4X7/8BS: RNCC: 4 | RNVC: 1
04228215: RNCC: 5 | RNVC: 2
C00RDPATH5285: RNCC: 6 | RNVC: 9
TABLE I(E) 3/4X7/8BS: RNCC: 6 | RNVC: 9
F1FA17242: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-1906
Swivel Knob Jeweler's Screwdriver

991361906
TOJ-984-J: RNCC: 3 | RNVC: 2
23599: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-742-2902
Open End Wrench

997422902
4-08-4418H: RNCC: 3 | RNVC: 2
444-289855: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-578-4186
Flat Tip And Cross Tip Screwdriver Set

995784186
5-65-426: RNCC: 3 | RNVC: 2
316-863: RNCC: 5 | RNVC: 2
SPSCM/PO/1329: RNCC: 6 | RNVC: 9

29 Apr 2010

5120-99-282-6789
Tool

992826789
121E23-100-00-2: RNCC: 3 | RNVC: 2

18 Jun 1992

5120-99-433-4443
Crimping And C Tool

994334443
NO PRIMARY REF 99-433-4443: RNCC: 3 | RNVC: 2
D4S2BSH2: RNCC: 5 | RNVC: 1
4P11F: RNCC: 5 | RNVC: 2
0273-204365: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-2689
Pin Remover

996662689
AE5955GSE: RNCC: 3 | RNVC: 2
07491-003: RNCC: 6 | RNVC: 9

30 Sep 2004

5120-99-970-5539
Torque Wrench

999705539
5AB73335-2: RNCC: 3 | RNVC: 2
EM15AB73335-2: RNCC: 3 | RNVC: 2
5AB73335-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-536-1570
Injector Housing To

995361570
NO PRIMARY REF 99-536-1570: RNCC: 3 | RNVC: 2
AH70331A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-541-9267
Wrench Spanner

995419267
E33000-43: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-8640
Socket Wrench Socket

991388640
BS4006-TABLE 23 80MM: RNCC: 3 | RNVC: 1
GSM280: RNCC: 3 | RNVC: 2
GHM8: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-957-4525
Torque Wrench

5120-99-957-5794
Torque Wrench

5120-99-124-0398

5120-99-457-2931
Inject Needle Probe

5120-99-632-6047

5120-99-149-8374
Hand Hydraulic Jack

991498374
H120L: RNCC: 3 | RNVC: 2
NIK2115: RNCC: 5 | RNVC: 2
20200506: RNCC: 5 | RNVC: 2
H120L: RNCC: 6 | RNVC: 9
FJ9473W0028: RNCC: 6 | RNVC: 9

3 Jul 1995

5120-99-720-4745
Extractor

997204745
T466539: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-545-3341
Combination Box And Open End Wrench

995453341
900216-0096: RNCC: 3 | RNVC: 2
1-0WE186882: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-786-1305
Pointer

997861305
V6913/2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-300-5147
Cross Tip Screwdriver

993005147
663-140: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-99-206-7786
Socket Wrench Handle Bar

992067786
NO PRIMARY REF 99-206-7786: RNCC: 3 | RNVC: 2
TS32: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-839-9251
Alignment Tool

998399251
FL1607A: RNCC: 3 | RNVC: 2
GR36211/A: RNCC: 5 | RNVC: 2

2 Sep 1991

5120-99-914-3621
Mounting Tool

999143621
00803010: RNCC: 3 | RNVC: 2
3V80D0013: RNCC: 5 | RNVC: 2
803010: RNCC: 5 | RNVC: 2

22 Apr 1999

5120-99-910-7834
Hand Rivet Set Up

999107834
DEF1221: RNCC: 4 | RNVC: 1
H2378: RNCC: 5 | RNVC: 2
1C5310: RNCC: 6 | RNVC: 9
H2378: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-837-3664
Screw Spanner

998373664
52164302: RNCC: 3 | RNVC: 2

27 Feb 2012

5120-99-977-2583
Spanner Wrench

999772583
UL21025: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-456-2061
Screw Extractor

994562061
F1FA13181: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
F1FA13181: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-826-4473

5120-99-414-3897
Drift

994143897
NO PRIMARY REF 99-414-3897: RNCC: 3 | RNVC: 2
ST1900-4: RNCC: 5 | RNVC: 9
27Q13544: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-731-8488
Flat Tip Screwdriver

997318488
KEN-572-3060K: RNCC: 3 | RNVC: 2
KEN-572-3060K: RNCC: 5 | RNVC: 2

1 Apr 2004

5120-99-974-1995
Spark Testing Screwdriver

999741995
NO PRIMARY REF 99-974-1995: RNCC: 3 | RNVC: 2
828-022: RNCC: 5 | RNVC: 2
337085: RNCC: 5 | RNVC: 2

9 Nov 2007

5120-99-562-7505
Support Ring Assemb

995627505
EA6305G505-043: RNCC: 3 | RNVC: 2
102ET-002: RNCC: 6 | RNVC: 9

12 Mar 2010

5120-99-812-3873
Jaw Spanner

998123873
NO PRIMARY REF 99-812-3873: RNCC: 3 | RNVC: 2
T80531: RNCC: 5 | RNVC: 2
Z2977: RNCC: 5 | RNVC: 9
LV3RRZ2977: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-757-6813
Torque Wrench

997576813
79/208: RNCC: 3 | RNVC: 2
3073-9000-099: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-423-0830
Release Turnscrew

994230830
NO PRIMARY REF 99-423-0830: RNCC: 3 | RNVC: 2
JF615: RNCC: 5 | RNVC: 2
GM6196: RNCC: 5 | RNVC: 2
4Q2632: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-209-7843
Hydraulic Jack Handle

992097843
NO PRIMARY REF 99-209-7843: RNCC: 3 | RNVC: 2
J246-900: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-146-2859
Main Rotor Wrench

991462859
S6170-10013: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-976-1475
Wrench

999761475
GU-25-05-003-13: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-6762
Seal Inserter

994656762
PE3423 ISSUE 1: RNCC: 3 | RNVC: 2
PE3423: RNCC: 5 | RNVC: 2
64BC10: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-8983
Assembly Post

994118983
NO PRIMARY REF 99-411-8983: RNCC: 3 | RNVC: 2
27Q16563: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-414-7753
Tubular Key Spanner

994147753
NO PRIMARY REF 99-414-7753: RNCC: 3 | RNVC: 2
ST2080: RNCC: 5 | RNVC: 9
W8WHDWST2080: RNCC: 6 | RNVC: 9
27Q13916: RNCC: 6 | RNVC: 9

3 Aug 1983

5120-99-556-1514
Spanner Wrench

5120-99-214-0068

5120-99-828-0309

5120-99-477-4195

5120-99-193-5569
Cranked Spanner

5120-99-479-6014
Accumulator Oil Tube Remover

994796014
AM 00 06 01008: RNCC: 3 | RNVC: 2
12080105: RNCC: 5 | RNVC: 2

21 Jun 2005

5120-99-609-1635
Comp Extractor Plug

996091635
NTS12076: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-252-7604
Mechanical Puller

992527604
S20: RNCC: 3 | RNVC: 2
P136: RNCC: 5 | RNVC: 2

8 Dec 1988

5120-99-539-1136
Torque Wrench

995391136
91377953: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-542-6423
Socket Wrench Crowfoot Attachment

995426423
Y3J.70769: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-7869
Hand Rivet Snap

999107869
DEF1221: RNCC: 4 | RNVC: 1
H2367: RNCC: 6 | RNVC: 9
FA16940: RNCC: 6 | RNVC: 9
1C5039: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-466-5484
Bi-Hexagonal Socket

994665484
1H531: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-99-915-4672
Piston Yoke Tool

999154672
EFMC75118: RNCC: 3 | RNVC: 2

8 Feb 2003

5120-99-960-5050
Socket Head Screw Key

999605050
0S77001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-923-0105
Flat Tip Screwdriver

999230105
AT2123: RNCC: 3 | RNVC: 2
FL992A60005: RNCC: 6 | RNVC: 9

11 Nov 1999

5120-99-916-9606
Hand Hammer

999169606
BS876: RNCC: 4 | RNVC: 1

29 Jul 1991

5120-99-970-7325
Electronic Equipment Alignment Tool

999707325
3041B0535: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-205-3068
Spanner Wrench

992053068
61-22390: RNCC: 3 | RNVC: 2
61-22390: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-411-8987
Test Adaptor

994118987
NO PRIMARY REF 99-411-8987: RNCC: 3 | RNVC: 2
ST2475: RNCC: 5 | RNVC: 9
27Q16562: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-761-9436
Cooling Pack Frame

997619436
V5851-18: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-99-742-1316
Removal Tool

997421316
NO PRIMARY REF 99-742-1316: RNCC: 3 | RNVC: 2
50201062: RNCC: 5 | RNVC: 2
O934-LWB021560: RNCC: 6 | RNVC: 9

10 Jul 2001

5120-99-795-3966
Socket Wrench Socket

997953966
BS4006-TABLE 23 KEY X: RNCC: 4 | RNVC: 1
FV 2199797: RNCC: 5 | RNVC: 2

22 May 1995

5120-99-130-0073
Open End Wrench

991300073
0DA227: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 1: RNCC: 4 | RNVC: 1
BS192-TABLE 2 7/8X15/16A/F: RNCC: 4 | RNVC: 1
401 1415: RNCC: 5 | RNVC: 2
6J8793: RNCC: 5 | RNVC: 2
TABLE I(E) 7/8X15/16A/F: RNCC: 6 | RNVC: 9
827439M1: RNCC: 6 | RNVC: 9
TABLE 2. 7/8 A/F X 15/16 A/F: RNCC: 6 | RNVC: 9
1C7175: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-580-5389
Screw Thread Insert Inserter

995805389
A31-10: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-670-3580
Hand Blind Riveter

996703580
7162-0003: RNCC: 3 | RNVC: 2
7162-0003: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-825-0840
Pinion Be Extractor

998250840
18G47BK: RNCC: 3 | RNVC: 2
LRT-51-500: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-433-4444

5120-99-632-3667

5120-99-168-9757
Seal Inserter And Remover

991689757
A2/9812C1435.1: RNCC: 3 | RNVC: 2
9812C1435.1: RNCC: 5 | RNVC: 2

7 Dec 1995

5120-99-437-5810
Cartridge Extractor

994375810
NO PRIMARY REF 99-437-5810: RNCC: 3 | RNVC: 2
DNC13-847: RNCC: 5 | RNVC: 2
0273-14791: RNCC: 6 | RNVC: 9

24 Dec 1976

5120-99-659-6190
Mechanical Puller

996596190
48415 A67/405: RNCC: 3 | RNVC: 2
48415A67-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-221-0364
Socket Wrench

992210364
11-6266-3: RNCC: 3 | RNVC: 2
H21221: RNCC: 5 | RNVC: 2
1H613: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-534-5401
Socket Wrench

995345401
T10231 ITEM C: RNCC: 3 | RNVC: 2
T10231C: RNCC: 5 | RNVC: 2
YS149: RNCC: 5 | RNVC: 2
T10231-9111TEMC: RNCC: 5 | RNVC: 2
H929-394729: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-4259
Peening Tool

997104259
NO PRIMARY REF 99-710-4259: RNCC: 3 | RNVC: 2
PE8833: RNCC: 5 | RNVC: 9

28 May 1970

5120-99-703-0677
Spark Testing Screwdriver

997030677
TL-502-803: RNCC: 3 | RNVC: 2
TL-502-803: RNCC: 3 | RNVC: 9

24 Oct 2008

5120-99-561-3270
Seat Puller

995613270
UH25257: RNCC: 3 | RNVC: 2
J475-936670: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-354-2802
Flat Tip Screwdriver

993542802
NO PRIMARY REF 99-354-2802: RNCC: 3 | RNVC: 2
166-4327: RNCC: 5 | RNVC: 2
T49125-055: RNCC: 5 | RNVC: 2

13 Aug 2009

5120-99-915-8019
Flat Tip And Cross Tip Screwdriver Set

999158019
NO PRIMARY REF 99-915-8019: RNCC: 3 | RNVC: 2
14077: RNCC: 5 | RNVC: 2

9 Jun 2004

5120-99-614-2238
Bearing And Bushing Driver Plug

996142238
WG1397-0223W142A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-725-6477
Socket Adaptor

997256477
18G1423: RNCC: 3 | RNVC: 2
LRT-41-007: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-318-7202
Bonding Tool

993187202
EA6705G620-041: RNCC: 3 | RNVC: 2

22 Dec 2004

5120-99-588-0654
Spanner Wrench

995880654
BL/D6046: RNCC: 3 | RNVC: 2

28 Jun 1993

5120-99-244-2187
Piston Bullet Guide

992442187
MC1277591: RNCC: 3 | RNVC: 2

11 Oct 2002

5120-99-803-0071
Spanner Wrench

998030071
5693-190: RNCC: 3 | RNVC: 2
SER2: RNCC: 5 | RNVC: 2
Y5693-190: RNCC: 5 | RNVC: 2
LV6MT278667: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-836-0545
Socket Wrench

998360545
369-168: RNCC: 3 | RNVC: 2
LV7FW369-168: RNCC: 6 | RNVC: 9
16C5280: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-434-9415
Socket Wrench Socket

994349415
BS4006-TABLE 17 9/16A/F: RNCC: 4 | RNVC: 1
BS4006: RNCC: 6 | RNVC: 9
F1FA17456: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-802-2340
Plunger G Extractor

998022340
NO PRIMARY REF 99-802-2340: RNCC: 3 | RNVC: 2
7044-10: RNCC: 5 | RNVC: 2

5 Sep 1979

5120-99-564-4456
Installer

995644456
EA6505G510-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-120-9526
Socket Imp2 - Bi-He

991209526
TMD8-LOCK ON: RNCC: 3 | RNVC: 2
TMD8-LOCK ON: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-641-8492

5120-99-560-5324

5120-99-551-2339
Coalescer Extractor

5120-99-541-3997
Crowfoot Spanner

5120-99-537-7824

5120-99-536-1541
Fuel Nozz Extractor

995361541
NO PRIMARY REF 99-536-1541: RNCC: 3 | RNVC: 2
AH70030A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-467-6518
Holding Block

994676518
MT1026-35: RNCC: 3 | RNVC: 2
27Q34801: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-0790
Nutdriver

996660790
BE-7807: RNCC: 3 | RNVC: 2
7238277: RNCC: 5 | RNVC: 2

19 Dec 2003

5120-99-755-6218
Com Shear Pin Clamp

5120-99-607-1541
Mechanical Puller

996071541
NO PRIMARY REF 99-607-1541: RNCC: 3 | RNVC: 2
HU6807: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-604-7681
Square Socket Spann

996047681
NO PRIMARY REF 99-604-7681: RNCC: 3 | RNVC: 2
A273989: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-527-2285
Seal Ring Protector

995272285
NO PRIMARY REF 99-527-2285: RNCC: 3 | RNVC: 2
B41712: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-2488

5120-99-124-2993

5120-99-639-1935
Extractor Tool

996391935
HPD286: RNCC: 3 | RNVC: 2
SDEM1-0060: RNCC: 5 | RNVC: 2
SW211A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-3640
Combination Box And Open End Wrench

991393640
RJM24: RNCC: 3 | RNVC: 2
2446-9000-050: RNCC: 3 | RNVC: 2
CSM224: RNCC: 3 | RNVC: 2
LCM24: RNCC: 3 | RNVC: 2
RJM24: RNCC: 3 | RNVC: 2
436-9353: RNCC: 5 | RNVC: 2
436-9353: RNCC: 5 | RNVC: 2
99-359-9159: RNCC: 6 | RNVC: 9
1C1393640: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5405
Spatula

999105405
DL9A-H1524: RNCC: 2 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 2
H1524: RNCC: 6 | RNVC: 9
F1FA14958: RNCC: 6 | RNVC: 9
1B1502: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-4722

5120-99-422-4589
Spanner Wrench

994224589
N37271-1: RNCC: 3 | RNVC: 2
88604-606-018: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-545-4666
Crowfoot Spanner