What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 78 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 78 of 108

5120-99-549-1188
Pec Extractor Tool

995491188
B30-12852-01: RNCC: 3 | RNVC: 2

28 Oct 1986

5120-99-146-2824
Spanner Wrench

991462824
S6170-25001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-813-9820
Spanner Wrench

5120-99-144-8871
Socket Wrench Crowfoot Attachment

991448871
MT1508: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-460-3145
Mechanical Puller

994603145
AT99: RNCC: 3 | RNVC: 2
37J3672: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-1948
Crimping Tool Die

991361948
576715: RNCC: 3 | RNVC: 2
C576715: RNCC: 5 | RNVC: 2
1H885: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-769-5226
Remover And Install

997695226
J6125-A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-740-2934
B Remover-Installer

5120-99-432-4408
Adjuster Tool

994324408
NO PRIMARY REF 99-432-4408: RNCC: 3 | RNVC: 2
75-56978: RNCC: 5 | RNVC: 2
88870-363-186: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-831-1629
Tool;Oilseal Remove

998311629
21-008A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-962-6283
Antitank Mine Brace

999626283
TX246: RNCC: 3 | RNVC: 2
T2TX246: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-465-6077
Wrench

994656077
1C8137: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-521-8818
Crimping Tool Stop

995218818
0229-036-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-173-0802
Craftsman's Tweezers

991730802
NO PRIMARY REF 99-173-0802: RNCC: 3 | RNVC: 2
549-628: RNCC: 5 | RNVC: 2

18 Dec 1997

5120-99-122-4573
Cross Tip Screwdriver

991224573
DEF STAN 51-11 (PART 16): RNCC: 4 | RNVC: 1
BS2559 : QART 2: RNCC: 4 | RNVC: 1
H60508: RNCC: 5 | RNVC: 2
64-573: RNCC: 5 | RNVC: 2
145-130: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5844
Double- Screwdriver

999105844
DEF-1192: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT28: RNCC: 6 | RNVC: 9
H2256: RNCC: 6 | RNVC: 9
FA16766: RNCC: 6 | RNVC: 9
H2256: RNCC: 6 | RNVC: 9
1C3191: RNCC: 6 | RNVC: 9
1(A)ITEM7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-2545
Hand Blind Riveter

991392545
7165-0004: RNCC: 3 | RNVC: 2
7165-0004: RNCC: 5 | RNVC: 2
7165-0004: RNCC: 5 | RNVC: 2
1C8467: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-4760
Mark Assembly Tool

991224760
16-0162-02: RNCC: 3 | RNVC: 2
1H588: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-2010
Swivel Socke Handle

998102010
NO PRIMARY REF 99-810-2010: RNCC: 3 | RNVC: 2
LV1BRC2079: RNCC: 5 | RNVC: 2

14 Nov 1981

5120-99-720-6635
Extractor Tool Asse

997206635
1049/8302: RNCC: 3 | RNVC: 2
L98623: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-496-6112
Bearing And Bushing Inserter And Remover

994966112
121E.93.751.00.0: RNCC: 3 | RNVC: 2
992BX-0034: RNCC: 6 | RNVC: 9

24 Nov 1999

5120-99-939-0633
Ratchet Wrench

999390633
B5775/13P: RNCC: 3 | RNVC: 2
B5775: RNCC: 5 | RNVC: 1
001294896: RNCC: 5 | RNVC: 1
SST/Y/500/00/A009/000: RNCC: 5 | RNVC: 1
B5775 ITEM 13P: RNCC: 5 | RNVC: 1
B5775/12-13: RNCC: 5 | RNVC: 1
Y/500/00/A009/000: RNCC: 5 | RNVC: 1
EM44320 ITEM 85: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-0769
Torque Wrench

991240769
WB808-1546: RNCC: 3 | RNVC: 2
41762-521: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-714-8542
Assembly And Extrac

997148542
NO PRIMARY REF 99-714-8542: RNCC: 3 | RNVC: 2
T205226: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-954-3010
Cont Insertion Tool

999543010
NO PRIMARY REF 99-954-3010: RNCC: 3 | RNVC: 2
558-1-00583: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-470-6539
Seal Replacer

994706539
DROP101V: RNCC: 3 | RNVC: 2
SK-LB3614: RNCC: 6 | RNVC: 9
DROP101V-1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-602-1451
Seal Remover

996021451
892/00224: RNCC: 3 | RNVC: 2
FH9643Z0001: RNCC: 6 | RNVC: 9

23 Apr 1996

5120-99-124-0449

5120-99-124-0431

5120-99-215-6006
Slide Hammer Bar

5120-99-116-7518

5120-99-971-8398

5120-99-836-0551
Mechanical Puller

5120-99-923-1487

5120-99-931-6236

5120-99-120-0031

5120-99-101-8060
Socket Wrench

991018060
UT.78: RNCC: 3 | RNVC: 2
64TN41: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-6775
Screw Thread Insert Inserter

991396775
ST557: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-614-8705
Se Compression Tool

996148705
2989A12: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-471-4098
Spanner Wrench

994714098
201649EFA-D4: RNCC: 3 | RNVC: 2

26 Apr 2007

5120-99-201-7852
Spanner Wrench

992017852
FV 466029: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-137-1244
Wire Unwrapping Bit

991371244
502118: RNCC: 3 | RNVC: 2
1H758: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-552-2850
Socket Wrench Socket

995522850
HBM41: RNCC: 3 | RNVC: 2
0D28371-07: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-548-0849
Torque Wrench Adapter

995480849
UX10493A: RNCC: 3 | RNVC: 2
734-351992: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-723-9225
Inline 1 Adapter Ki

997239225
17219230-0: RNCC: 3 | RNVC: 2
3163583: RNCC: 5 | RNVC: 2
17219230-0: RNCC: 5 | RNVC: 2
021JB-009: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-974-7426
Box Wrench

999747426
2-00469170: RNCC: 3 | RNVC: 2
140856: RNCC: 5 | RNVC: 2
730/08/14: RNCC: 6 | RNVC: 9

31 May 2002

5120-99-593-2878
Rigging Tool

995932878
EB6605G506-041: RNCC: 3 | RNVC: 2
1MEVGVB: RNCC: 6 | RNVC: 9

28 Jul 2004

5120-99-738-7627
Drift

997387627
CH137543: RNCC: 3 | RNVC: 2
85-690-2827: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-737-6706
Mechanical Puller Step Plate

997376706
EA6305G677-103: RNCC: 3 | RNVC: 2

7 Nov 2009

5120-99-654-4860
Socket Wrench Extension

996544860
MBEU64120-407: RNCC: 3 | RNVC: 2
AMBEU64120-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-581-0706
Torque Wrench Adapter

995810706
AE5811: RNCC: 3 | RNVC: 2

13 Sep 2002

5120-99-499-9200
Socket Wrench Crowfoot Attachment

994999200
07422300: RNCC: 3 | RNVC: 2

13 Dec 1993

5120-99-739-7978
Spanner Wrench

997397978
FV 2030035: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-726-8689
Socket Wrench Crowfoot Attachment

997268689
SCO44: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-741-9743
Bearing And Bushing Driver

997419743
460009601C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-739-5767
Seal Installer

997395767
VT18393: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-7210
Mechanical Puller

994657210
PE 50097: RNCC: 3 | RNVC: 2
T.77779: RNCC: 5 | RNVC: 2
64DE7: RNCC: 6 | RNVC: 9
64DE7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-715-2721
Socket Wrench Handle Bar

997152721
E56: RNCC: 3 | RNVC: 2
BF98J0131MP: RNCC: 5 | RNVC: 2
H21773: RNCC: 5 | RNVC: 2
BF98J013: RNCC: 5 | RNVC: 2
ST038060: RNCC: 5 | RNVC: 2
542D0-187: RNCC: 6 | RNVC: 9
542D0187: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-190-7313
Punch

991907313
EA6505G517-101: RNCC: 3 | RNVC: 2

22 May 2008

5120-99-414-1958
Torque Reactor

994141958
NO PRIMARY REF 99-414-1958: RNCC: 3 | RNVC: 2
WB5-88-299: RNCC: 5 | RNVC: 9
26WX95145: RNCC: 6 | RNVC: 9
26WX95145: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-4672
Open End Box Wrench

994224672
N43890-5: RNCC: 3 | RNVC: 2
88604-606-101: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-320-5013
Socket Wrench

993205013
625/7/06105/000: RNCC: 3 | RNVC: 2
M018A0980-00: RNCC: 5 | RNVC: 2
625/7/06105/000: RNCC: 5 | RNVC: 2
UW214C: RNCC: 6 | RNVC: 9

9 Oct 1997

5120-99-256-8944
Torque Wrench

992568944
904801-0070-003: RNCC: 3 | RNVC: 2
1139: RNCC: 5 | RNVC: 1
100 P: RNCC: 5 | RNVC: 1
ES122D: RNCC: 6 | RNVC: 9
SL2P: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-740-8112
Openi Tool Assembly

997408112
SK1622: RNCC: 3 | RNVC: 2
FE9804S0002: RNCC: 6 | RNVC: 9

17 Mar 1998

5120-99-745-3295
Crimping Tool

997453295
39047: RNCC: 3 | RNVC: 2
E29010: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-799-0094
Template

997990094
SP59954: RNCC: 3 | RNVC: 2
123530ST: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-823-4123
Bus Bar Lever

998234123
FV58736: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-789-3802
Spanner Wrench

997893802
T975: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-553-2300
Inspection Mirror

995532300
VM-X1: RNCC: 3 | RNVC: 2

5 Nov 2004

5120-99-653-5342
Socket Wrench Attachment Universal Joint

996535342
00806051: RNCC: 3 | RNVC: 2
4V80H0020: RNCC: 5 | RNVC: 2
806051: RNCC: 5 | RNVC: 2

20 Apr 1999

5120-99-208-9475
Inserted Hammer Face

992089475
410AF: RNCC: 3 | RNVC: 2
710AF: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-558-7368
Socket Wrench Extension

995587368
75MZ114: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-9214
Screwdriver Bit

991369214
CRS8A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-517-4722
Bolt Universal Tool

995174722
02-0249: RNCC: 3 | RNVC: 2

13 May 2004

5120-99-631-4286
Mechanical Puller

996314286
MVEE39086A2: RNCC: 3 | RNVC: 2
NTS15040: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-8039
Installation Tool

991388039
FX10-1530T: RNCC: 3 | RNVC: 2
1C8429: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-380-6717
Impact Extension

993806717
IM122A: RNCC: 3 | RNVC: 2
C569-70T259081: RNCC: 6 | RNVC: 9

20 Apr 2002

5120-99-719-3706
Open End Wrench

997193706
NMT-271: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-99-910-4352
Sheet Metalwo Stake

999104352
NO PRIMARY REF 99-910-4352: RNCC: 3 | RNVC: 2
H159: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-761-7826
Socket Wrench Handle

997617826
P461S1377: RNCC: 3 | RNVC: 2
H727-460317: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-183-3014
Tool Plate

991833014
EA6705G561-105: RNCC: 3 | RNVC: 2

8 Nov 2008

5120-99-973-2752
Hand Screw Jack

999732752
100401-0405-ASY: RNCC: 3 | RNVC: 2
L98531: RNCC: 5 | RNVC: 2
100401-0405: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-753-9759
Gear Unit Lifter

997539759
J24454: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-8565
Guide Pin Assembly Tool

997608565
T1509: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-488-7727
Socket Wrench Socket

994887727
NM54A: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-747-1026
Socket Wrench Crowfoot Attachment

997471026
T.7250-407: RNCC: 3 | RNVC: 2
T7250-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-787-5739
Hand Terminal Crimping Tool

997875739
69008-0959: RNCC: 3 | RNVC: 2

20 Jun 2005

5120-99-458-9466
Spanner Wrench

994589466
1001522: RNCC: 3 | RNVC: 2
GD1110: RNCC: 5 | RNVC: 2
470667: RNCC: 6 | RNVC: 9
0249-6006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-661-6653
Shaft Button

996616653
00832/DT/035941: RNCC: 3 | RNVC: 2
00832/AS/035944 ITEM 7: RNCC: 5 | RNVC: 2
00832/AS/035944/7: RNCC: 5 | RNVC: 2

26 Aug 2000

5120-99-748-1013
Body

997481013
P-891067-001: RNCC: 3 | RNVC: 2
P891067-001: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-136-3656
Socket Wrench Socket

991363656
GH1687: RNCC: 3 | RNVC: 2
BS4006-TABLE 24 1-11/16A/F: RNCC: 4 | RNVC: 1
0D25046: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-422-4617
Spanner Wrench

994224617
N37276-13: RNCC: 3 | RNVC: 2
88604-606-046: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-794-7688
Socket Spanner Atta

5120-99-794-6726
Con Extraction Tool

5120-99-769-5230
Bearing And Bushing Driver Plug

997695230
J23613-01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-517-3737
Seal Inserter

995173737
FV 2188176: RNCC: 3 | RNVC: 2
FV 2188176: RNCC: 5 | RNVC: 2
FH9707C0002: RNCC: 6 | RNVC: 9

22 Apr 1997

5120-99-714-3283
Peg Spanner

997143283
T577518: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-3634
Wood Hammer Handle

5120-99-466-2477

5120-99-466-2185

5120-99-559-1024

5120-99-654-2985
Mechanical Puller

996542985
P-890153-407: RNCC: 3 | RNVC: 2
P890153-407: RNCC: 5 | RNVC: 2

7 Feb 1980

5120-99-462-9739
Electronic Equipment Alignment Tool

994629739
74-005-94: RNCC: 3 | RNVC: 2
T.T.5: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-99-148-4851
C Clamp

991484851
ELGC-001-01: RNCC: 3 | RNVC: 2

18 May 2009

5120-99-660-9360
Box Wrench

996609360
DIN896A10X13: RNCC: 2 | RNVC: 2
A10X13DIN896: RNCC: 5 | RNVC: 2
D00896.002.9: RNCC: 5 | RNVC: 2
D00896.002.9: RNCC: 5 | RNVC: 2

15 Sep 1994

5120-99-752-4300
Swage

5120-99-746-8851

5120-99-962-2551
Open End Wrench

999622551
RGF11283-146: RNCC: 3 | RNVC: 1
M4MC1618: RNCC: 6 | RNVC: 9
257819: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-131-5689
Flat Tip Screwdriver

991315689
NO PRIMARY REF 99-131-5689: RNCC: 3 | RNVC: 2
BS2559: RNCC: 5 | RNVC: 1
341-7041: RNCC: 5 | RNVC: 2
341-7041: RNCC: 5 | RNVC: 2
ASMTS1: RNCC: 6 | RNVC: 9

2 Jan 2003

5120-99-434-7317
Socket Wrench Socket

994347317
EBM20: RNCC: 3 | RNVC: 2
HSM220: RNCC: 3 | RNVC: 2
BS4006-TABLE 13 20MM: RNCC: 4 | RNVC: 1
SWM201 LOCK-ON: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9
F1FA17645: RNCC: 6 | RNVC: 9
1L265: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-585-8521
Socket Head Screw Key

995858521
NO PRIMARY REF 99-585-8521: RNCC: 3 | RNVC: 2
735-122: RNCC: 5 | RNVC: 2

28 May 2004

5120-99-600-9817
Tappet Adjusting Ki

996009817
VT11688: RNCC: 3 | RNVC: 2
VT13388: RNCC: 5 | RNVC: 1
VT13389: RNCC: 5 | RNVC: 1
VT13390: RNCC: 5 | RNVC: 1
VT13387: RNCC: 5 | RNVC: 1

27 Sep 1991

5120-99-772-8399
Bushing Wrench

997728399
T.841: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-727-3754
Seal Manipulat Tool

997273754
FHQ100-1: RNCC: 3 | RNVC: 2
(D)FHQ100-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-436-0314
Acceptance Gauge

5120-99-438-6063

5120-99-435-2679

5120-99-483-7245

5120-99-423-7950
Box Spanner

994237950
NO PRIMARY REF 99-423-7950: RNCC: 3 | RNVC: 2
9032-40: RNCC: 5 | RNVC: 2
552621: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-923-1987
Inspection Mirror

999231987
1192K: RNCC: 3 | RNVC: 1
DM26: RNCC: 5 | RNVC: 2
0274-274054: RNCC: 6 | RNVC: 9
0274-923-1987: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-133-7360
Hand Terminal Crimping Tool

991337360
NO PRIMARY REF 99-133-7360: RNCC: 3 | RNVC: 2
456-778: RNCC: 5 | RNVC: 2

13 Jun 2006

5120-99-560-1424
Socket Wrench Handle Bar

995601424
SU0311-15: RNCC: 3 | RNVC: 2
12-71372: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-248-4148
Cylinder Valve Key

992484148
500-A171/MRI: RNCC: 3 | RNVC: 2
500-A171/CE: RNCC: 5 | RNVC: 9
16-501: RNCC: 6 | RNVC: 9
500-A171: RNCC: 6 | RNVC: 9
0210C053: RNCC: 6 | RNVC: 9

9 Apr 2002

5120-99-705-6222
Assembly Tool

997056222
PP/J1090LB: RNCC: 3 | RNVC: 2
0625P-066: RNCC: 6 | RNVC: 9

6 Apr 2001

5120-99-722-8213
Nut Spinner

997228213
4570: RNCC: 3 | RNVC: 2
76783D: RNCC: 5 | RNVC: 2
3100337: RNCC: 5 | RNVC: 2
FL953A50007: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5963
Adjustable Wrench

999105963
8070: RNCC: 3 | RNVC: 2
00.37.03.17: RNCC: 5 | RNVC: 2
210421: RNCC: 5 | RNVC: 2
BW210421: RNCC: 5 | RNVC: 2
8070: RNCC: 5 | RNVC: 2
1L35: RNCC: 6 | RNVC: 9
TASP35: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5972
Box Wrench

999105972
BS3555: RNCC: 4 | RNVC: 1
BS3555: RNCC: 5 | RNVC: 2
2RB8793: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-763-0379
Box Wrench

997630379
T.4207-407: RNCC: 3 | RNVC: 2
T4207-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-756-8887
Spanner Wrench

997568887
T7243-405: RNCC: 3 | RNVC: 2
T.7243-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-769-6362
Mechanical Puller

997696362
558/1/05538: RNCC: 3 | RNVC: 2
558/1/05538: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-884-0154
Hand Screw Jack

998840154
SC-290157 REFERENCE 2: RNCC: 3 | RNVC: 2
SC-290157/2: RNCC: 5 | RNVC: 2

17 Feb 2003

5120-99-902-1314
H Blind Riveter Jaw

999021314
7498-4401: RNCC: 3 | RNVC: 2

4 Oct 1991

5120-99-795-6117

5120-99-801-2959

5120-99-795-9404
Socket Wrench

5120-99-775-1187
Spanner Wrench

5120-99-831-9276

5120-99-810-9423

5120-99-513-1918
Insertion-Extractio

995131918
203: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-282-4159

5120-99-535-9007
Punch

995359007
ARB-M6-PUNCH/RRA: RNCC: 3 | RNVC: 2
ARB-M6-PUNCH: RNCC: 5 | RNVC: 1

20 Apr 2001

5120-99-734-5240
Spanner Wrench

997345240
AJT5161/RRA: RNCC: 3 | RNVC: 2
AJT5161: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-629-0330
Socket Wrench

996290330
WG0388-7003-041: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-663-4971
Splined Adaptor

996634971
LT-16790: RNCC: 3 | RNVC: 2
A1076083: RNCC: 5 | RNVC: 2

17 Jan 2001

5120-99-139-2507
Spanner Attachment

5120-99-609-1640
Cupw Caulking Punch

996091640
NTS10899: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-601-9305
Valve Spring Compressor

996019305
6605853: RNCC: 3 | RNVC: 2

15 Mar 2010

5120-99-304-1452
Mechanical Puller

993041452
PE 59873: RNCC: 3 | RNVC: 2
64DE2517655: RNCC: 6 | RNVC: 9

18 Jun 1991

5120-99-529-3469
Lamp Extractor

995293469
HY81100: RNCC: 3 | RNVC: 2
MS1209001: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-709-4651
Drill Guide

997094651
D 0.1910: RNCC: 3 | RNVC: 2
D.191: RNCC: 5 | RNVC: 2
3AP5189: RNCC: 6 | RNVC: 9

10 Aug 1993

5120-99-820-7941
Vibration D Spanner

998207941
PC19225: RNCC: 3 | RNVC: 2
PC19225: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-562-5715
Socket Wrench Socket

995625715
76792: RNCC: 3 | RNVC: 2
H-MM: RNCC: 5 | RNVC: 1

1 May 2003

5120-99-225-9129
Spanner Wrench

992259129
108-018: RNCC: 3 | RNVC: 2
INS-013: RNCC: 5 | RNVC: 2

6 Sep 2000

5120-99-993-0834
C Clamp

999930834
17601-150: RNCC: 3 | RNVC: 2
062ET-008: RNCC: 6 | RNVC: 9

1 Jun 2006

5120-99-580-5420
Coil Thread Nozzle

995805420
A32-13: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-440-4450
Drill Drift

994404450
3AND4: RNCC: 3 | RNVC: 2
02-4812-9: RNCC: 5 | RNVC: 2
W4WX2205: RNCC: 6 | RNVC: 9
3B3494: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-760-9816
Socket Wrench Extension

997609816
NK210A: RNCC: 3 | RNVC: 2

18 May 2006

5120-99-548-7924
Box Wrench

995487924
DSP007-02-234: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-701-5527
Spanner Wrench

5120-99-660-7723
Open End Wrench

996607723
85/119/19/10/1042: RNCC: 3 | RNVC: 2
850119019001001042: RNCC: 5 | RNVC: 2
ES114A3A: RNCC: 6 | RNVC: 9

6 Jan 1994

5120-99-978-1888
Screwdriver Bit

999781888
2USB8M: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-957-5444
Injec Tool Assembly

999575444
EB001792: RNCC: 3 | RNVC: 2
75 732: RNCC: 5 | RNVC: 2

1 Jul 1997

5120-99-244-0637
Flat Tip Screwdriver

992440637
RE100 SCW150X8: RNCC: 3 | RNVC: 2

22 Mar 2006

5120-99-554-5452
Timing Gauge

995545452
Y3J70803: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-958-1374
Pliers

999581374
TA551: RNCC: 3 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

4 Apr 2006

5120-99-977-3719
Mechanical Puller

999773719
01TC11022: RNCC: 3 | RNVC: 2
01TC11022: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-213-6525
Socket Wrench Adapter

992136525
T-19606: RNCC: 3 | RNVC: 2
CV177473: RNCC: 5 | RNVC: 2

1 Mar 2011

5120-99-401-3859
Oil Pressur Spanner

994013859
NO PRIMARY REF 99-401-3859: RNCC: 3 | RNVC: 2
244143: RNCC: 5 | RNVC: 2
16C5439: RNCC: 6 | RNVC: 9

16 Dec 1975

5120-99-120-4653
Riveter Collet Jaw

991204653
19514: RNCC: 3 | RNVC: 2
550-11C: RNCC: 3 | RNVC: 2
1C6921: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-325-0296
Open End Wrench

993250296
110079-4405: RNCC: 3 | RNVC: 2
26VC/95150: RNCC: 6 | RNVC: 9

10 Aug 1996

5120-99-815-9188
End Adjustment Tool

998159188
7144-499: RNCC: 3 | RNVC: 2
W7144-499: RNCC: 5 | RNVC: 2
7144-499: RNCC: 5 | RNVC: 2

1 Aug 1978

5120-99-241-7437
Mechanical Puller

992417437
EA6405G534-041: RNCC: 3 | RNVC: 2
112DJ-002: RNCC: 6 | RNVC: 9

23 Mar 2011

5120-99-526-6427
First Cleaning Tool

995266427
NO PRIMARY REF 99-526-6427: RNCC: 3 | RNVC: 2
400915-1003: RNCC: 5 | RNVC: 2
400915: RNCC: 5 | RNVC: 9
H929-526-6427: RNCC: 6 | RNVC: 9
929-378488: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-559-3244
Socket Head Screw Key

995593244
3325 A DETAIL 5: RNCC: 3 | RNVC: 2
482-933303: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-820-1857

5120-99-580-5401

5120-99-801-3182

5120-99-803-0196
Six Way Box Spanner

998030196
NO PRIMARY REF 99-803-0196: RNCC: 3 | RNVC: 2
LV6MT2-17076: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-803-0244
Piston Ring Clamp

998030244
NO PRIMARY REF 99-803-0244: RNCC: 3 | RNVC: 2
LV6MT2-31266: RNCC: 5 | RNVC: 2

25 Apr 1977

5120-99-816-1910
Scari Removing Tool

998161910
PGH7778A: RNCC: 3 | RNVC: 2
PG7778A: RNCC: 5 | RNVC: 2
PGH7778: RNCC: 5 | RNVC: 9
LV8REABEPGH7778A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-793-3097
Oil C Assembly Tool

997933097
S4: RNCC: 3 | RNVC: 2
S4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-753-3075
Spanner

997533075
DSR1662-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-2282
Combination Box And Open End Wrench

991242282
OEX44: RNCC: 3 | RNVC: 2
RJ1375: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H6456: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-650-2462
Extractor Tip

996502462
20126-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-525-2266
Socket Wrench Crowfoot Attachment

995252266
430-6700-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-640-7926
Mechanical Puller

996407926
HW11455: RNCC: 3 | RNVC: 2
64DT25: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-126-0529
Spanner Wrench

991260529
FV 2171093: RNCC: 3 | RNVC: 2
FV 2171093: RNCC: 5 | RNVC: 2

12 Jan 1995

5120-99-136-5537
Extractor

991365537
T711: RNCC: 3 | RNVC: 2
T711: RNCC: 5 | RNVC: 2
492-136-5537: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-303-7124
Ratchet Wrench

993037124
B5775/12N: RNCC: 3 | RNVC: 2
B5775/12-13: RNCC: 5 | RNVC: 1

8 Jul 2008

5120-99-538-6412
Extractor Assembly

995386412
NO PRIMARY REF 99-538-6412: RNCC: 3 | RNVC: 2
F45297: RNCC: 5 | RNVC: 2
CF45297: RNCC: 5 | RNVC: 2
H454-538-6412: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-216-2379
Flap Setting Tool

992162379
WG1588-0020-041: RNCC: 3 | RNVC: 2

23 Mar 2013

5120-99-445-7553
Socket Wrench Socket

994457553
STMMD11 LOCK-ON: RNCC: 3 | RNVC: 2
XP98PC01265: RNCC: 6 | RNVC: 9

27 Mar 1998

5120-99-724-5060
Tool

997245060
NO PRIMARY REF 99-724-5060: RNCC: 3 | RNVC: 2
844601740: RNCC: 5 | RNVC: 2
4TU4902344: RNCC: 6 | RNVC: 9

7 Dec 2005

5120-99-560-6340
Socket Wrench

995606340
E736: RNCC: 3 | RNVC: 2
H363-492113: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-406-2508
Turnlock Fastener Clinching Punch

994062508
A3TOOL4: RNCC: 3 | RNVC: 2
28FP405: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-794-4162
Socket Wrench Crowfoot Attachment

997944162
1950 M24: RNCC: 3 | RNVC: 2
1950M-24: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-769-1796
Spanner Bar

997691796
PA87735: RNCC: 3 | RNVC: 2

14 Feb 1984

5120-99-785-7753
Tweezers

997857753
H02410: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-1793
Fo Lifting Assembly

997691793
PA87804: RNCC: 3 | RNVC: 2

14 Feb 1984

5120-99-793-3091
Assembly Bush

997933091
S78: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-560-5245
Spring Inserter And Remover

995605245
EAST31: RNCC: 3 | RNVC: 2
001-115-053: RNCC: 5 | RNVC: 1
SSBN01-609-22: RNCC: 5 | RNVC: 1
001115053: RNCC: 5 | RNVC: 1
609-22: RNCC: 5 | RNVC: 1
EAST31: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-459-9096
Spanner Wrench

994599096
25Y235A: RNCC: 3 | RNVC: 2
26TD-95036: RNCC: 6 | RNVC: 9
26TD95036: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-555-2756
Torque Wrench Adapter

995552756
ZJEF005553SST-ITEM-036: RNCC: 3 | RNVC: 2
ZJEF005553SST/036: RNCC: 5 | RNVC: 2

27 Feb 2002

5120-99-120-7304
Inserted Hammer Face

991207304
75/620/DF: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
DL9A-H6002: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-725-3877
Escape Hatch Tool

997253877
TS-AK5826: RNCC: 3 | RNVC: 2
TS-AK5826: RNCC: 5 | RNVC: 2

20 Jan 2009

5120-99-255-2219
Nose Tip

992552219
7162-0304: RNCC: 3 | RNVC: 2
1C-8715: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-2770
Stud Remover And Setter

991362770
H6829: RNCC: 3 | RNVC: 2
31: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-589-2105
Inserter And Remove

995892105
HD-20514: RNCC: 3 | RNVC: 2

8 Sep 1999

5120-99-137-1238
Electrical Contact Remover

991371238
107-1012: RNCC: 3 | RNVC: 2
1H753: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-208-3229
Righ Stabiliser Arm

992083229
NO PRIMARY REF 99-208-3229: RNCC: 3 | RNVC: 2
SAB2152B: RNCC: 5 | RNVC: 2
4Q3491: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-930-2748
Hand Shovel

999302748
TL-502-316: RNCC: 3 | RNVC: 2
NMT-134: RNCC: 5 | RNVC: 9

4 Dec 1998

5120-99-244-4234
Jaw Carrier

992444234
7494-3026: RNCC: 3 | RNVC: 2
AVDEL7494-3026: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-7946
Craftsman's Tweezers

999107946
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
F1FA19433: RNCC: 6 | RNVC: 9
1J177: RNCC: 6 | RNVC: 9
DL9A-H4599: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
H4599: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-719-4877
Socket Wrench Socket

997194877
EBM32: RNCC: 3 | RNVC: 2
BS4006-TABLE 13 32MM: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-714-9080
Spanner Wrench

997149080
T301884: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-9339

5120-99-137-5731
Open Jaw Spanner

5120-99-600-9960
Mechanical Puller

5120-99-401-2709
Cr Protector Sleeve

5120-99-976-2009
Remover

999762009
3823589: RNCC: 3 | RNVC: 2
FH980530001: RNCC: 6 | RNVC: 9

3 Aug 1998

5120-99-956-2980
Box Wrench

999562980
43027: RNCC: 3 | RNVC: 2

6 Jun 1992

5120-99-860-3064
Ratchet Wrench

998603064
RBB3743: RNCC: 3 | RNVC: 2
MCP24B: RNCC: 6 | RNVC: 9

9 Mar 2000

5120-99-862-1553
Draw Bar Adaptor

998621553
FN24032: RNCC: 3 | RNVC: 2

10 Jun 1993

5120-99-874-1719
Front And Remover

998741719
18G304: RNCC: 3 | RNVC: 2
LV7ML18G304: RNCC: 6 | RNVC: 9
16C6055: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5941
Hand Shovel

999105941
BS3388PT1: RNCC: 4 | RNVC: 1

22 Sep 1988

5120-99-872-8376
Socket Wrench Adapter

998728376
13208: RNCC: 3 | RNVC: 2

22 Jun 2010

5120-99-735-4287
Pliers

997354287
63: RNCC: 3 | RNVC: 1
154: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-580-5263
Screw Thread Insert Tang Breakoff Tool

995805263
1195-6: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-792-1754
Valve Grinding Tool

997921754
017200: RNCC: 3 | RNVC: 2
13461/A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-244-6970
S Installation Tool

992446970
1023/82.20: RNCC: 3 | RNVC: 2
1023/82.20: RNCC: 5 | RNVC: 2
ES122C1B: RNCC: 6 | RNVC: 9

5 Dec 1994

5120-99-139-7035
Socket Wrench Handle

991397035
SOCKET HANDLE HINGED 15 IN.LG: RNCC: 3 | RNVC: 1
3/8 IN.SQ DRIVE: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-822-3006
Seal Inserter

998223006
31522170: RNCC: 3 | RNVC: 2
R 45573: RNCC: 5 | RNVC: 2

23 May 1994

5120-99-848-2810

5120-99-977-3024
Box Wrench

5120-99-146-4135

5120-99-139-7538

5120-99-530-5811
Spanner Wrench

995305811
8833: RNCC: 3 | RNVC: 2
25425: RNCC: 5 | RNVC: 2
106-203079: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-743-1192
Socket Screw-Driver

997431192
100016-0730-ASY: RNCC: 3 | RNVC: 2
X69 / 0329 / 212: RNCC: 5 | RNVC: 2
683/GA/29150/000: RNCC: 5 | RNVC: 2
X69/0329/212: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-741-1053
Plier Clamp

997411053
486-014: RNCC: 3 | RNVC: 2
MA486-014: RNCC: 5 | RNVC: 2
RA486-014: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-4808
Wood Caulking Iron

999104808
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A-H1448: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
H1448: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-745-3430
Socket Wrench Socket

997453430
SF101: RNCC: 3 | RNVC: 2
SF 101 LOCK-ON: RNCC: 5 | RNVC: 2
SF101 LOCK-ON: RNCC: 5 | RNVC: 2
100JA08307: RNCC: 5 | RNVC: 2
JA08307: RNCC: 5 | RNVC: 2
SF101: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-481-9586
Crossbeam Assembly

994819586
EA6405G525-055: RNCC: 3 | RNVC: 2
1MEVGV1: RNCC: 6 | RNVC: 9

28 Jul 2004

5120-99-316-3469
Injector Sleeve Bal

993163469
GA5121: RNCC: 3 | RNVC: 2

13 Nov 1991

5120-99-668-7365
Adjustable Wrench

996687365
SEN5011080K: RNCC: 3 | RNVC: 2
2007624: RNCC: 5 | RNVC: 2

28 Feb 2013

5120-99-460-2199
Oil Seal Assem Tool

994602199
ST2068: RNCC: 3 | RNVC: 2
37J3054: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-192-0758
Spanner Wrench

991920758
110079-305: RNCC: 3 | RNVC: 2
26VC-95211: RNCC: 6 | RNVC: 9
99-427-8049: RNCC: 6 | RNVC: 9

31 Jan 2002

5120-99-513-9212
Spanner Wrench

995139212
NO PRIMARY REF 99-513-9212: RNCC: 3 | RNVC: 2
94446: RNCC: 5 | RNVC: 2
94446: RNCC: 5 | RNVC: 9

29 Jan 2010

5120-99-606-3086
Bobbin Extractor

996063086
NO PRIMARY REF 99-606-3086: RNCC: 3 | RNVC: 2
T256806: RNCC: 5 | RNVC: 9

14 May 1980

5120-99-910-5607
Roving Punch

999105607
NO PRIMARY REF 99-910-5607: RNCC: 3 | RNVC: 2
H1961: RNCC: 5 | RNVC: 2
FA16018: RNCC: 6 | RNVC: 9
H1961: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-794-4174
Ratchet Wrench

997944174
RW 603-7F-8F: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-4662
Hand Hammer

999104662
H1214: RNCC: 3 | RNVC: 2
1B1342: RNCC: 6 | RNVC: 9
FA14157: RNCC: 6 | RNVC: 9
910-4662: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-7822
Tinman Groove Punch

999107822
NO PRIMARY REF 99-910-7822: RNCC: 3 | RNVC: 2
H2909: RNCC: 5 | RNVC: 2
1B1305: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-446-7327
Peg Spanner

994467327
NO PRIMARY REF 99-446-7327: RNCC: 3 | RNVC: 2
UL8932: RNCC: 5 | RNVC: 2
88634-617-341: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-5026
Socket Wrench Screwdriver Attachment

991365026
A33-8M: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 26: RNCC: 4 | RNVC: 1
H21743: RNCC: 5 | RNVC: 2
H6854: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-8514
Socket Wrench

991388514
NO PRIMARY REF 99-138-8514: RNCC: 3 | RNVC: 2
R69: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-144-8837
Spanner Wrench

991448837
MT1751: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-147-6290
Impact Type Bit Set And Handle Screwdriver

991476290
41504: RNCC: 3 | RNVC: 2
734-781: RNCC: 5 | RNVC: 2
734-781: RNCC: 5 | RNVC: 2
ASMTS1: RNCC: 6 | RNVC: 9

3 Jan 2003

5120-99-422-4658
Open End Wrench

994224658
N38432-12: RNCC: 3 | RNVC: 2
88604-606-087: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-232-3108
Nutdriver

992323108
7810RS: RNCC: 3 | RNVC: 2
438-4166: RNCC: 5 | RNVC: 2

11 Sep 2003

5120-99-687-2338
Socket Wrench Handle Bar

996872338
MELCO T38: RNCC: 3 | RNVC: 2

13 Oct 2006

5120-99-558-0854
Socket Wrench Crowfoot Attachment

995580854
P292.06.0294: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-139-7682
Open End Wrench

991397682
100161-9000-006: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-347-9303
Sleeve

993479303
NO PRIMARY REF 99-347-9303: RNCC: 3 | RNVC: 2
110410: RNCC: 5 | RNVC: 2
CV177145: RNCC: 5 | RNVC: 2

1 Apr 2011

5120-99-255-7076
Spigot Bush Re Tool

992557076
3342251: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-863-5103
Seal Inserter

998635103
AO271914: RNCC: 3 | RNVC: 2

3 Oct 2011

5120-99-863-1451
Spanner Wrench

998631451
PO1964: RNCC: 3 | RNVC: 2

27 Mar 2004

5120-99-862-1076
Pressing Dolly

998621076
FV1051668: RNCC: 3 | RNVC: 2
113027ST: RNCC: 5 | RNVC: 2

2 Feb 1983

5120-99-883-3418
Torque Wrench Adapter

998833418
DRT 68432: RNCC: 3 | RNVC: 2

3 Jun 2009

5120-99-460-9763
Piasaba Brush Head

994609763
N0D3080-1: RNCC: 3 | RNVC: 2
162293: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-424-0977
Box Wrench

994240977
F199407: RNCC: 3 | RNVC: 2
F199407: RNCC: 5 | RNVC: 9
26FX95305: RNCC: 6 | RNVC: 9
26FX95305: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-962-1898
Breech Mecha Wrench

999621898
CM2332: RNCC: 3 | RNVC: 2
M3CM2332: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-4182
Hand Blind Riveter

991354182
136: RNCC: 3 | RNVC: 2
136: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5974
Box Wrench

999105974
BS3555-TABLE 2 15/16X1-1/8A/F: RNCC: 4 | RNVC: 1
038807: RNCC: 5 | RNVC: 2
BS3555: RNCC: 6 | RNVC: 9
RSA2306: RNCC: 6 | RNVC: 9
99-560-1027: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-3611
Hub Variable Puller

994013611
NO PRIMARY REF 99-401-3611: RNCC: 3 | RNVC: 2
APK0WAY273LESSRAM: RNCC: 5 | RNVC: 2
16C6310: RNCC: 6 | RNVC: 9

17 Jan 1979

5120-99-553-7981
Installation And Re

995537981
WD0188-10272-041: RNCC: 3 | RNVC: 2

22 Dec 2012

5120-99-422-1474
Tee Special Wrench

994221474
NO PRIMARY REF 99-422-1474: RNCC: 3 | RNVC: 2
272-10-21: RNCC: 5 | RNVC: 2
0633-400571: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-969-1955
Open End Wrench

999691955
825/00036: RNCC: 3 | RNVC: 2
FL9631P0010: RNCC: 6 | RNVC: 9

13 Feb 1996

5120-99-412-2087
Spacer Extractor

994122087
EA6305G676-041: RNCC: 3 | RNVC: 2

18 Mar 2006

5120-99-455-2459
Punch

994552459
EA6505G515-103: RNCC: 3 | RNVC: 2

22 May 2008

5120-99-455-5518
Open End Wrench

994555518
PED/ACP/2306 SHEET 004: RNCC: 3 | RNVC: 2
A44250: RNCC: 5 | RNVC: 1
15241119: RNCC: 5 | RNVC: 2
PED/ACP/2306 ITEM 104: RNCC: 5 | RNVC: 2
PED/ACP/2306/004: RNCC: 5 | RNVC: 2
PED/ACP/2306/104: RNCC: 5 | RNVC: 2

12 Mar 2009

5120-99-758-5894
Socket Wrench Extension

997585894
48415A53-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-901-4191
Compressing Handle

999014191
200393-1: RNCC: 3 | RNVC: 2
HC1439: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-612-7373
Spanner Wrench

5120-99-462-4875

5120-99-462-5571

5120-99-462-6220

5120-99-138-6694
Spring Removal Tool

991386694
SW/19/10/12001: RNCC: 3 | RNVC: 2
WE112B2: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-4658
Hand Bar Tool

991384658
NO PRIMARY REF 99-138-4658: RNCC: 3 | RNVC: 2
S64-8467-50: RNCC: 5 | RNVC: 2
64V10001: RNCC: 6 | RNVC: 9

9 Mar 1990

5120-99-752-6171
Spanner Wrench

997526171
A3/2030/161-403: RNCC: 3 | RNVC: 2
A3-2030-161-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-257-5730
Socket Wrench Socket

992575730
BUGGSIE 464: RNCC: 3 | RNVC: 2
464: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-225-5626
Spanner Wrench

992255626
460005797: RNCC: 3 | RNVC: 2

10 Feb 1995

5120-99-578-4263
Alignment Card

995784263
303-682KIT: RNCC: 3 | RNVC: 2
303-682KIT: RNCC: 5 | RNVC: 2

13 Dec 2011

5120-99-724-9299
Cable Handling Tool

997249299
MRPT3187-15: RNCC: 3 | RNVC: 2

23 Jan 2008

5120-99-773-0020
Grippin Screwdriver

997730020
NO PRIMARY REF 99-773-0020: RNCC: 3 | RNVC: 2
547-981: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-666-7046
Torque Wrench Adapter

996667046
SAO10542: RNCC: 3 | RNVC: 2
AHA2243 TOOL 9: RNCC: 5 | RNVC: 2

20 Jul 2006

5120-99-527-7761
Screwdriver Bit

995277761
B33372-6: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-738-7629
Tool Adaptor Ring

997387629
CH138781: RNCC: 3 | RNVC: 2
85-690-2825: RNCC: 6 | RNVC: 9

3 Oct 1990

5120-99-702-0984
Socket Head Screw Key

997020984
100857-7000-004: RNCC: 3 | RNVC: 2
PES-047: RNCC: 5 | RNVC: 2
WE123A3: RNCC: 6 | RNVC: 9

7 Mar 1996

5120-99-725-6474
Removal Adaptor

997256474
18G284AAH: RNCC: 3 | RNVC: 2
LRT-37-004: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-789-3243
Injection Pum Tool

997893243
23-017: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-781-2208
Socket Wrench Socket

997812208
EA6305G507-101: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-666-1780
Ball-Ended Driver

996661780
FEC 281-608: RNCC: 3 | RNVC: 2

4 Jun 2004

5120-99-521-6631
Forcing-Off Screw

995216631
NO PRIMARY REF 99-521-6631: RNCC: 3 | RNVC: 2
UD68289: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-083-3598

5120-99-772-5979
Open End Wrench

5120-99-460-9767

5120-99-619-5991

5120-99-461-7748
Tool Assembly

994617748
A055862: RNCC: 3 | RNVC: 2
27G2600: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-309-1933
Cylinder Tommy Bar

993091933
PC12516: RNCC: 3 | RNVC: 2
PC12516: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-670-4652
Seal Inserter

996704652
217004: RNCC: 3 | RNVC: 2

3 Apr 1997

5120-99-681-5836
Special Purpose Combination Wrench

996815836
C166051: RNCC: 3 | RNVC: 2

24 Apr 2008

5120-99-436-4242

5120-99-436-4241

5120-99-782-2124
Spanner

997822124
H21290: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-463-1438
Spanner Wrench

5120-99-710-3857
Spanner Wrench

997103857
PE 8819: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-460-4008
Socket Wrench Spanner Attachment

994604008
PE.51534: RNCC: 3 | RNVC: 2
64DE504: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-619-5186
Box Wrench

996195186
1701035: RNCC: 3 | RNVC: 2
1873: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-617-7025
Assembly Tool

996177025
AE5508: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-439-4462
Socket Wrench Socket Set

994394462
BS4006PT1: RNCC: 4 | RNVC: 1
SCHEDULE S0532: RNCC: 5 | RNVC: 2
F1FA17348: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-413-8218
Puller

994138218
001.589.89.33.00: RNCC: 3 | RNVC: 2
001.589.89.33.00: RNCC: 5 | RNVC: 2
FH970AB0008: RNCC: 6 | RNVC: 9

19 Sep 1997

5120-99-655-0341
Drift

996550341
460009338C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-711-9318
Socket Head Screw Key Set

997119318
BS2470: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-768-9462
Lockring Drive Tool

997689462
RMT2025-30D: RNCC: 3 | RNVC: 2
RMT2025-30D: RNCC: 5 | RNVC: 2

13 Jul 1987

5120-99-839-0096
Combination Box And Open End Wrench

998390096
NO PRIMARY REF 99-839-0096: RNCC: 3 | RNVC: 2
735-510: RNCC: 5 | RNVC: 2
MET 1110: RNCC: 5 | RNVC: 2

23 Sep 2003

5120-99-763-3146
Torque Wrench

997633146
NO PRIMARY REF 99-763-3146: RNCC: 3 | RNVC: 2
18289: RNCC: 5 | RNVC: 2
PN00002991: RNCC: 5 | RNVC: 2

18 Mar 2008

5120-99-143-1770
Extractor Sleeve

991431770
NO PRIMARY REF 99-143-1770: RNCC: 3 | RNVC: 2
110079-16321: RNCC: 5 | RNVC: 2
110079-16321: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-910-6301
Socket Wrench Adapter

999106301
BS4006: RNCC: 4 | RNVC: 1
FA17366: RNCC: 5 | RNVC: 2
H4389: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6383
Socket Wrench Socket

999106383
BS4006-TABLE 21 1-13/16A/F: RNCC: 4 | RNVC: 1
DEF STAN 51-11 PART 4: RNCC: 4 | RNVC: 1
H20847: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9
FA17481: RNCC: 6 | RNVC: 9
1L129: RNCC: 6 | RNVC: 9
TABLE I(D) 1-13/16A/F: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-327-7506
Socket Wrench Adapter

993277506
PJ1086782: RNCC: 3 | RNVC: 2
0625P-212: RNCC: 6 | RNVC: 9
062CE-085: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-151-1508
Guide Tool

991511508
252NM43590: RNCC: 3 | RNVC: 2
068: RNCC: 5 | RNVC: 2
023 SCALE 03370-16/5/91: RNCC: 6 | RNVC: 9

8 Oct 1991

5120-99-833-9422
Dessicant Remo Tool

998339422
EU01126-01-07: RNCC: 3 | RNVC: 2
042ZD-0004: RNCC: 6 | RNVC: 9

10 Sep 2004

5120-99-532-5040
Fuel Pump Extractor

995325040
7244/57: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-399-0820
Support Tool

993990820
EA6305G651-041: RNCC: 3 | RNVC: 2
1MEV5HH: RNCC: 6 | RNVC: 9

26 Nov 1999

5120-99-821-2756
Assembly Tool

998212756
NO PRIMARY REF 99-821-2756: RNCC: 3 | RNVC: 2
142 860: RNCC: 5 | RNVC: 2

6 Feb 1998

5120-99-467-6742
Checking Fixture

994676742
HW22996: RNCC: 3 | RNVC: 2
37F12030: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-617-6257
Car Extraction Tool

996176257
MBEU64454: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-397-9078
Digital Force Gauge

993979078
45215-9018-04: RNCC: 1 | RNVC: 2
CFG200: RNCC: 3 | RNVC: 2

1 Aug 2002

5120-99-770-6792
Extraction Tool

997706792
8526-SP192: RNCC: 3 | RNVC: 2
852262: RNCC: 6 | RNVC: 9
1H/1182: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-784-0654
Extractor Tool

997840654
ED.200: RNCC: 3 | RNVC: 2
A3/741078: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-219-5628
Pin Inserter

992195628
HU22869-01: RNCC: 3 | RNVC: 2
HU22869/1: RNCC: 6 | RNVC: 9

25 Jun 1998

5120-99-402-1252
Tyre Lever

994021252
TL22: RNCC: 3 | RNVC: 2
10TT4: RNCC: 5 | RNVC: 2
LV6MT2-33589: RNCC: 6 | RNVC: 9
16C6298: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-453-7300
Press Tool Assembly

994537300
NO PRIMARY REF 99-453-7300: RNCC: 3 | RNVC: 2
PE14889: RNCC: 5 | RNVC: 9
64AD47: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-750-0155
Hand Hydraulic Jack

997500155
A1199012: RNCC: 3 | RNVC: 2
RFS10-01: RNCC: 5 | RNVC: 2

26 Apr 2001

5120-99-756-8798
Torque Wrench Adapter

997568798
D3592-733C-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-753-7678
Insertion And Extra

997537678
H21571: RNCC: 1 | RNVC: 2
CIET-12: RNCC: 3 | RNVC: 1
294-110: RNCC: 3 | RNVC: 1
M15570-12: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-732-0447
Valve Seat Inserter

997320447
GA5101-6: RNCC: 3 | RNVC: 2

11 Feb 1986

5120-99-733-6430
Torque Wrench Adapter

997336430
104779001-AFT-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-315-8770
Leveling-Support Jack

993158770
EU0905G051-066: RNCC: 3 | RNVC: 2

31 Jul 2013

5120-99-052-3252
Driveshaft Rem Fork

5120-99-147-9670
Socket Head Screw Key

991479670
ST510005: RNCC: 3 | RNVC: 2

14 Jun 2000

5120-99-108-9831
Preforming Adaptor

991089831
PE 50034: RNCC: 3 | RNVC: 2
T.77839: RNCC: 5 | RNVC: 2
64DE54: RNCC: 6 | RNVC: 9
64DE54: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-6554
Flat Tip Screwdriver

991386554
04939.0: RNCC: 3 | RNVC: 2
SD1 04939.0: RNCC: 5 | RNVC: 2
682A0002: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-964-4543
Flashguar C Spanner

999644543
AN32943: RNCC: 3 | RNVC: 2
5048790: RNCC: 5 | RNVC: 2
M2AN32943: RNCC: 6 | RNVC: 9
7S1993: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-104-1384
Jackhead Adaptor

991041384
NO PRIMARY REF 99-104-1384: RNCC: 3 | RNVC: 2
GM4401: RNCC: 5 | RNVC: 2
4Q2661: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-3732

5120-99-124-0433

5120-99-260-8654
Open End Wrench

992608654
FV2272369: RNCC: 3 | RNVC: 2
65A0004A: RNCC: 5 | RNVC: 2
051DY-022: RNCC: 6 | RNVC: 9

25 Apr 2005

5120-99-197-5903

5120-99-725-6475
Ge Retainer Remover

997256475
18G1457: RNCC: 3 | RNVC: 2
LRT-12-029: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-745-9346
Peening Tool

997459346
T8743-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-207-8888
Anti Torque Shaft

992078888
NO PRIMARY REF 99-207-8888: RNCC: 3 | RNVC: 2
0EB1383: RNCC: 5 | RNVC: 2
GMB75955: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-777-0146
Spanner Wrench

997770146
100388-0110-ASY: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-827-2612
Withdrawal Attachme

998272612
NO PRIMARY REF 99-827-2612: RNCC: 3 | RNVC: 2
FV817706: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-831-1635
Compressor;Spring

998311635
14-006: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-838-2452
Pitch Beam Set Tool

998382452
WG1588-0022-043: RNCC: 3 | RNVC: 2

23 Mar 2013

5120-99-423-8247
Open End Wrench

994238247
9031-36: RNCC: 3 | RNVC: 2
558250: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-837-7301
Aligning Adaptor

998377301
NO PRIMARY REF 99-837-7301: RNCC: 3 | RNVC: 2
X23-19: RNCC: 5 | RNVC: 2
32441: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-805-8639
Clutch Locking Tool

998058639
NO PRIMARY REF 99-805-8639: RNCC: 3 | RNVC: 2
61-3774: RNCC: 5 | RNVC: 9

7 Aug 1990

5120-99-214-4087
Clutch Alignme Tool

992144087
3-30-0011: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-977-3917
Mechanic Clamp Tool

999773917
01TC11017-02: RNCC: 3 | RNVC: 2
01TC11017-02: RNCC: 6 | RNVC: 9

14 Sep 1989

5120-99-977-2866
Socket Head Screw Key

999772866
ST510003: RNCC: 3 | RNVC: 2

13 Jun 2000

5120-99-702-4434
Spanner Wrench

997024434
452-65236-160: RNCC: 3 | RNVC: 2
FV2206263: RNCC: 5 | RNVC: 2
DS/N/1041: RNCC: 7 | RNVC: 1

13 Aug 1997

Load More Results