What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 77 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 77 of 108

5120-99-809-0614
Torque Adaptor

998090614
NKN736: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

8 Aug 2001

5120-99-820-1606
Socket Wrench

998201606
44X758: RNCC: 3 | RNVC: 2
LV8RERB44X758: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-808-7279
Spanner Wrench

998087279
FV3028076: RNCC: 3 | RNVC: 2
FH000R40011: RNCC: 6 | RNVC: 9

17 Apr 2000

5120-99-479-6194
Flat Tip Screwdriver

994796194
69214: RNCC: 3 | RNVC: 2

21 May 2007

5120-99-466-9178
Open End Wrench

994669178
0FW413: RNCC: 3 | RNVC: 2
A3561: RNCC: 5 | RNVC: 2
1C7783: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-547-3896
Lug Adapter

995473896
DPA 1701: RNCC: 3 | RNVC: 2

6 May 1999

5120-99-109-1281
Hand Blind Riveter

991091281
AVDELH: RNCC: 3 | RNVC: 2
0275-14690: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-446-5872
Combination Box And Open End Wrench

994465872
CA18: RNCC: 3 | RNVC: 2
0E4276: RNCC: 5 | RNVC: 2
W20RR4276: RNCC: 6 | RNVC: 9
W20RR89: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-052-5705
Bearing Remova Tool

990525705
EA3205G028-123: RNCC: 3 | RNVC: 2

23 Jul 1998

5120-99-437-5836
Combinat Switch Key

994375836
NO PRIMARY REF 99-437-5836: RNCC: 3 | RNVC: 2
EEM1452: RNCC: 5 | RNVC: 2
0274-4658: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-083-3767
Open End Wrench

990833767
110079-4403: RNCC: 3 | RNVC: 2
26VC/95149: RNCC: 6 | RNVC: 9

10 Aug 1996

5120-99-251-3946
Ba Driving-Off Tool

992513946
519293-2: RNCC: 3 | RNVC: 2
70293: RNCC: 5 | RNVC: 1
519293: RNCC: 5 | RNVC: 1
D0001-95/9: RNCC: 6 | RNVC: 9
SR1523/9: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-944-9247
Sprung Screwdriver

999449247
NO PRIMARY REF 99-944-9247: RNCC: 3 | RNVC: 2
SCREWSTARTER8 1-21N: RNCC: 5 | RNVC: 9
B11-13501: RNCC: 6 | RNVC: 9

6 Oct 1978

5120-99-512-1585
Accessory. Wrench

995121585
012215: RNCC: 3 | RNVC: 2
042B6-006: RNCC: 6 | RNVC: 9

17 Jul 2004

5120-99-819-1426
Torque Screwdriver

998191426
PTS-TC-010: RNCC: 3 | RNVC: 2
4649-675: RNCC: 6 | RNVC: 9

27 Apr 2012

5120-99-828-0409
Clutch Plat Mandrel

998280409
LRT-12-040A: RNCC: 3 | RNVC: 2
605022: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-1992
Combination Box And Open End Wrench

991241992
OEX110: RNCC: 3 | RNVC: 2
RJ344: RNCC: 5 | RNVC: 2
RJ344-11/32: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H6441: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-256-8960
Box Wrench

992568960
487-22: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-588-1539
Extractor Tool

995881539
630/1/51228: RNCC: 3 | RNVC: 2
SES15B: RNCC: 6 | RNVC: 9

27 Sep 1991

5120-99-359-4365
Spanner Lug

993594365
BAC11356: RNCC: 3 | RNVC: 2
021SR-015: RNCC: 6 | RNVC: 9
021Y0-025: RNCC: 6 | RNVC: 9

26 Jun 2002

5120-99-588-1363
Socket Span Mod Kit

995881363
SD4/268956: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-453-7290

5120-99-415-5689

5120-99-415-5704

5120-99-756-8845
Spanner Wrench

997568845
T7040-403: RNCC: 3 | RNVC: 2
T7040: RNCC: 6 | RNVC: 9
99PB02-008: RNCC: 6 | RNVC: 9
XP990BG0491: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-113-2703
Insertion-Extractio

991132703
601109: RNCC: 3 | RNVC: 2
25431-01805: RNCC: 5 | RNVC: 2
LL SERIES SIZE 22/23: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-558-9626
Socket Wrench Handle Bar

995589626
SU40050-15: RNCC: 3 | RNVC: 2
12-103567: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-954-1708

5120-99-933-4203

5120-99-500-9229
Puller

995009229
999 6201: RNCC: 3 | RNVC: 2
FH980420145: RNCC: 6 | RNVC: 9

26 Jun 1998

5120-99-492-9574
Pressing Cuff Seal

994929574
MC1269110: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-978-4947

5120-99-910-6253
Open End Wrench

999106253
BS192: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-977-5177
Box Spanner

999775177
587751: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-881-4052
Vice Handle Spindle

998814052
S112 01.01.12: RNCC: 3 | RNVC: 2
01.01.12: RNCC: 5 | RNVC: 2

15 May 2001

5120-99-300-1724
Batter Removal Tool

993001724
0716: RNCC: 3 | RNVC: 2
0716: RNCC: 5 | RNVC: 2

16 Mar 2010

5120-99-226-0080
Socket Head Screw Key

992260080
FV2292495: RNCC: 3 | RNVC: 2
65A0011A: RNCC: 5 | RNVC: 2

1 May 2008

5120-99-137-1617

5120-99-138-9357

5120-99-137-1602

5120-99-713-6348
Socket Head Screw Key

997136348
A0105410: RNCC: 3 | RNVC: 2
27G3497: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-667-0090
Polishing Tool

996670090
MRPT3083: RNCC: 3 | RNVC: 2

23 Jan 2008

5120-99-204-3571
Spanner Wrench

992043571
EA2395: RNCC: 3 | RNVC: 9
W8WHCHSEA2395: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-471-0808
Box Spanner

994710808
NO PRIMARY REF 99-471-0808: RNCC: 3 | RNVC: 2
AKDTNW208: RNCC: 5 | RNVC: 2
1C7056: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-9314
Ratchet Wrench

997109314
98-8083-31N0FFSET: RNCC: 3 | RNVC: 2
98 8083 3IN OFFSET: RNCC: 5 | RNVC: 2
H210-958119: RNCC: 6 | RNVC: 9
LE462D3: RNCC: 6 | RNVC: 9
210-958119: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-6865
Socket Wrench Socket

991376865
NO PRIMARY REF 99-137-6865: RNCC: 3 | RNVC: 2
6418D: RNCC: 5 | RNVC: 2
6418D: RNCC: 5 | RNVC: 2
1L622: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-4726
Hand Hammer

991204726
C0-0RDPATTERNH6077: RNCC: 2 | RNVC: 2
H69A: RNCC: 3 | RNVC: 2
8SECAREFDWGGP84: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-104-2131
Toggle Release Tool

991042131
6805288: RNCC: 3 | RNVC: 2
A6805288: RNCC: 5 | RNVC: 2
27FR4834: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-417-8298
Torque Wrench

994178298
015000: RNCC: 3 | RNVC: 2
TLS 0022 MICRO: RNCC: 5 | RNVC: 2

24 Jul 1995

5120-99-131-3063
Open End Wrench

991313063
110079-15257: RNCC: 3 | RNVC: 2
26VC-95695: RNCC: 6 | RNVC: 9

26 Feb 2002

5120-99-908-8132
Tongs

999088132
CED0028: RNCC: 3 | RNVC: 2

11 Jan 2012

5120-99-910-5582
Drive Pin Punch

999105582
C00RDPATH1918: RNCC: 3 | RNVC: 2
H1918: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-337-0632
Socket Wrench Socket

993370632
73377: RNCC: 3 | RNVC: 2
73377: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-300-9359
Socket Wrenc Socket

993009359
S14-94-1003 99/1: RNCC: 3 | RNVC: 2

14 Feb 1994

5120-99-484-3634
Spanner Wrench

994843634
SGE4332-0200: RNCC: 3 | RNVC: 2
107E6-012: RNCC: 6 | RNVC: 9

18 Nov 2010

5120-99-763-9868
Splined Wrench

997639868
453 7785-069: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-221-0362
Cont Insertion Tool

992210362
11-7401-12: RNCC: 3 | RNVC: 2
H20228: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-169-4833
Mechani Puller Body

991694833
SGE3210-5140: RNCC: 3 | RNVC: 2

29 May 2012

5120-99-825-4300
Bead Cutting Tool

998254300
NO PRIMARY REF 99-825-4300: RNCC: 3 | RNVC: 2
ST0788: RNCC: 5 | RNVC: 2
ST788: RNCC: 5 | RNVC: 2
STU788: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-442-8198
Screwdriver Bit

994428198
C2662696: RNCC: 3 | RNVC: 2
28364T: RNCC: 5 | RNVC: 2
121NQ-009: RNCC: 6 | RNVC: 9

23 Feb 2012

5120-99-797-6800
Extractor

997976800
CHA748-2261: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-613-6289
Shaft Assembly Tool

996136289
NTS14757: RNCC: 3 | RNVC: 2
NTS14757: RNCC: 5 | RNVC: 2

4 Dec 2001

5120-99-676-5527
Pliers

996765527
58200: RNCC: 3 | RNVC: 2

2 Oct 2008

5120-99-622-4474
Open End Wrench

996224474
2J7881: RNCC: 3 | RNVC: 2
PE15289: RNCC: 5 | RNVC: 1
T2AB3983: RNCC: 5 | RNVC: 1
FB205060: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-444-1380

5120-99-745-9352
Spanner Wrench

997459352
T7037-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-9028
Hand Blind Riveter

991209028
7301-0006: RNCC: 3 | RNVC: 2
7301-0006: RNCC: 5 | RNVC: 2
AHJ0SRP190P200: RNCC: 5 | RNVC: 2
7301-0006: RNCC: 5 | RNVC: 9
AHJOSRP190: RNCC: 5 | RNVC: 9
EP3-16: RNCC: 5 | RNVC: 9
7301-0006: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-754-7754
Tip Bloc Pin-Pusher

997547754
S6170-15004: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-745-1460
Oil Seal Repla Tool

997451460
21-011C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-339-6464
Open End Wrench

993396464
TA419: RNCC: 3 | RNVC: 2
DB100123 ITEM 14: RNCC: 5 | RNVC: 2
DB100123/14: RNCC: 5 | RNVC: 2
UWS4N: RNCC: 6 | RNVC: 9

9 Jul 2004

5120-99-468-8392
Hook Spanner

994688392
RS181-33: RNCC: 3 | RNVC: 2
27Y4318: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4813
Wood Caulking Iron

999104813
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H1452: RNCC: 6 | RNVC: 9
H1452: RNCC: 6 | RNVC: 9
9104813: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-747-8899
Ratchet Wrench

997478899
880541/063: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-748-5889
Mechanical Puller

997485889
2907-A1/403: RNCC: 3 | RNVC: 2
2907A1-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-660-9115
Impeller Extraction

996609115
55-T20459: RNCC: 3 | RNVC: 2
VDS36577: RNCC: 5 | RNVC: 2
T20459: RNCC: 5 | RNVC: 2
001C20166: RNCC: 6 | RNVC: 9

27 Jul 2000

5120-99-910-7947
Craftsman's Tweezers

999107947
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H4600: RNCC: 6 | RNVC: 9
F1FA19434: RNCC: 6 | RNVC: 9
1J178: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H4600: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-614-8815
Drive And Swage Too

5120-99-136-2308

5120-99-498-9197
Drill Guide

994989197
80040667: RNCC: 3 | RNVC: 2

4 Nov 2008

5120-99-828-8962
Camshaft Supp Plate

998288962
ST157: RNCC: 3 | RNVC: 2

3 Oct 1978

5120-99-826-6606
Spanner Locknut

998266606
FV1051683: RNCC: 3 | RNVC: 2
112522ST: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-826-0798
Presstool

998260798
VT10674: RNCC: 3 | RNVC: 2

24 Aug 1977

5120-99-816-8324
Pinion Depth Gauge

998168324
P4075: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-425-6545

5120-99-801-8792

5120-99-801-8784

5120-99-340-5142
Socket Wrench Extension

993405142
NK215A: RNCC: 3 | RNVC: 2

18 May 2006

5120-99-710-3876
Open End Wrench

997103876
PE9084: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-735-8021

5120-99-714-5670
Pin Extractor Tool

997145670
NO PRIMARY REF 99-714-5670: RNCC: 3 | RNVC: 2
ANP1: RNCC: 5 | RNVC: 2
403551: RNCC: 5 | RNVC: 2
1H301: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-756-3244
Pliers

997563244
D9111: RNCC: 3 | RNVC: 2
D9111: RNCC: 5 | RNVC: 2
UWS4A1: RNCC: 6 | RNVC: 9

14 Nov 2005

5120-99-756-7628
Socket Wrench Crowfoot Attachment

997567628
SCO38: RNCC: 3 | RNVC: 2
H24779: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-757-0785
Torque Wrench Adapter

997570785
29763: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-99-741-7264
Socket Wrench

997417264
RAK2311: RNCC: 3 | RNVC: 2
HLK4871: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-731-2159
Bearing And Bushing Inserter

997312159
FV2077335: RNCC: 3 | RNVC: 2
AT60034: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-209-0256
Moulded Handle

992090256
611-940-100: RNCC: 3 | RNVC: 2
194-01-00: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-531-2112
Plu Extraction Tool

995312112
SDEM1-0060: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-737-1094
Alignment Pin

997371094
21-123: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-736-6588
Tool Box

997366588
NO PRIMARY REF 99-736-6588: RNCC: 3 | RNVC: 2
TLD1OO3: RNCC: 5 | RNVC: 2
26LK4808: RNCC: 6 | RNVC: 9

23 Aug 2005

5120-99-747-6329
Swage Head

997476329
D12910-56: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-6717
Socket Wrench

997606717
FHQ6343-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-552-3399
Spanner Wrench

995523399
1255-901TEM16: RNCC: 3 | RNVC: 2
1255-901TEM16: RNCC: 3 | RNVC: 9
1255-90-16: RNCC: 5 | RNVC: 2
1255-90-16: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-977-0210
Hand Saw Set

999770210
77: RNCC: 3 | RNVC: 2
94-370R: RNCC: 5 | RNVC: 2
94-370R: RNCC: 5 | RNVC: 2
1C9770210: RNCC: 6 | RNVC: 9
99-613-1879: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-778-2119
Torque Wrench

997782119
STANDARD: RNCC: 3 | RNVC: 1
85-690-1945: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-513-5227
Socket Head Screw Key

995135227
06880: RNCC: 3 | RNVC: 2
4567: RNCC: 5 | RNVC: 1
4567-11MM: RNCC: 5 | RNVC: 1
5010559068807: RNCC: 5 | RNVC: 2

25 Oct 1991

5120-99-104-5837
Hand Hydraulic Jack

991045837
GM10334: RNCC: 3 | RNVC: 2
4Q2657: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-735-5182
Flat Tip Screwdriver

997355182
NO PRIMARY REF 99-735-5182: RNCC: 3 | RNVC: 2
544-639: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-471-6235
Hand Screw Jack

994716235
TW661-130-22-00: RNCC: 3 | RNVC: 2

28 Dec 2011

5120-99-120-9238
Bli Riveter Mandrel

991209238
NO PRIMARY REF 99-120-9238: RNCC: 3 | RNVC: 2
21G1-1: RNCC: 5 | RNVC: 2
7161-6006: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-3001
Box Wrench

991243001
SFA536: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-544-8507
Sing Position Head

995448507
TP120: RNCC: 3 | RNVC: 2
TP120: RNCC: 5 | RNVC: 2
1M2038: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-733-1902
Screwdriver Bit

997331902
25981650: RNCC: 3 | RNVC: 2

2 Jan 2013

5120-99-423-1381
Counterhold

994231381
999 6304: RNCC: 3 | RNVC: 2
FH980420102: RNCC: 6 | RNVC: 9

24 Jun 1998

5120-99-150-3080
Socket Wrench Spanner Attachment

991503080
A0113960: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-1496
Face Spanner Wrench Socket

996551496
460009184D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-578-7942
Riveting Fixture

995787942
AM21749: RNCC: 3 | RNVC: 2

1 Jul 2005

5120-99-605-8896
Non-Return Valve To

996058896
EFMC75124: RNCC: 3 | RNVC: 2

8 Feb 2003

5120-99-549-9868
Plier Clamp

995499868
HAL 73: RNCC: 3 | RNVC: 2
HAL 73: RNCC: 5 | RNVC: 2

9 Aug 2005

5120-99-124-0759
Electrical Contact Remover

991240759
294-184: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-9982
Crimping To Locator

991389982
NO PRIMARY REF 99-138-9982: RNCC: 3 | RNVC: 2
SKD13451A3: RNCC: 5 | RNVC: 2
HD424470: RNCC: 5 | RNVC: 2
SKD13451: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-339-5094
Spanner Wrench

993395094
HD-70182: RNCC: 3 | RNVC: 2

19 Apr 2010

5120-99-792-3906
Rotation Tool

997923906
CHA729-1123: RNCC: 3 | RNVC: 2

12 Jul 1991

5120-99-454-7691
Bung Wrench

994547691
MDSK858-259: RNCC: 3 | RNVC: 2
720375: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-808-3671
Tappet Holder

998083671
7044-648: RNCC: 3 | RNVC: 2
7044-648: RNCC: 5 | RNVC: 2
Y7044-648: RNCC: 5 | RNVC: 2
7044-648: RNCC: 5 | RNVC: 2
TS11: RNCC: 5 | RNVC: 2
ET648: RNCC: 5 | RNVC: 2
LV6MT12CB7044-648: RNCC: 6 | RNVC: 9
16C6362: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-717-2298
Spanner Wrench

997172298
T175565: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-924-0785
Socket Wrench Handle

999240785
NMT-151: RNCC: 3 | RNVC: 2
NMT151: RNCC: 5 | RNVC: 2

1 Dec 1998

5120-99-778-6558
Open End Wrench

997786558
78293 1 5/8 IN.: RNCC: 3 | RNVC: 2
YS175: RNCC: 5 | RNVC: 1
H929-154652: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-760-1079
Open End Wrench

997601079
T10074-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-269-1575
Extracting Device

992691575
17229022-0: RNCC: 3 | RNVC: 2
17229022-0: RNCC: 5 | RNVC: 2
021JB-029: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-763-8791
Torque Wrench Adapter

997638791
T7081-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-215-9411
Socket Wrench Socket

992159411
18300A 11/16: RNCC: 3 | RNVC: 2

25 Jul 2006

5120-99-767-1717
Insertion Tool Asse

997671717
MBEU-57043: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-531-5349
Craftsman's Tweezers

995315349
9447/200: RNCC: 3 | RNVC: 2
A4-9447-200: RNCC: 5 | RNVC: 2
A4/9447/200: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-953-6259
Plug-Socket Pliers

999536259
80-05-43-1189: RNCC: 3 | RNVC: 2

21 Dec 1988

5120-99-790-5680
Mechanical Puller

997905680
WG0068-0753-045W142C05: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-779-1796
Clutch Drum Remover

997791796
2125-9806-000: RNCC: 3 | RNVC: 2
2125-9806-000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-535-5749
Sleeve

995355749
XUT42395: RNCC: 3 | RNVC: 2

7 Feb 1995

5120-99-826-8487
Torque Wrench Adapter

998268487
VT13471: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-020-6604
Hand Abrasive Wheel Dresser

990206604
26A02: RNCC: 3 | RNVC: 2

27 Feb 1992

5120-99-127-5375
Box Wrench

991275375
6RBM1819: RNCC: 3 | RNVC: 2
2RBM1819: RNCC: 6 | RNVC: 9
RSM218: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-0013
Spanner Wrench

991500013
AE2926: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-214-3624
Top Press Tool

992143624
M0D1015: RNCC: 3 | RNVC: 1
3A5171: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-6404
Face Spanner Wrench Socket

996596404
55061-A7/405: RNCC: 3 | RNVC: 2
55061A7-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-648-2555
Extractor

996482555
EA6205G528-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-530-5812
Bowl Spanner

995305812
30199: RNCC: 3 | RNVC: 2
15261: RNCC: 5 | RNVC: 2
106-203089: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-571-5342
Jaw Cable Grip

995715342
DNCMSW13-140-21: RNCC: 2 | RNVC: 2
0231-21: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-623-9216
Brake Release Tool

996239216
GWLBL-CH-250: RNCC: 3 | RNVC: 2
CH-250: RNCC: 6 | RNVC: 9
FL963NJ0006: RNCC: 6 | RNVC: 9

21 Jan 1997

5120-99-910-4415
Hand Leather Creaser

999104415
H509: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-477-1729
Mechanical Puller Attachment

994771729
EA6205G573-101: RNCC: 3 | RNVC: 2

17 Mar 2009

5120-99-601-9711
Socket Wrench Adapter

996019711
9R0-1730-01: RNCC: 3 | RNVC: 2

23 Feb 2012

5120-99-433-4480
Ferrule Key Driver

994334480
NO PRIMARY REF 99-433-4480: RNCC: 3 | RNVC: 2
Z2590: RNCC: 5 | RNVC: 2
0274-12185: RNCC: 6 | RNVC: 9

21 Sep 1988

5120-99-803-0249
Ball Race Extractor

998030249
NO PRIMARY REF 99-803-0249: RNCC: 3 | RNVC: 2
LV6MT2-33218: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-614-6945
Torque Wrench Adapter

996146945
MTE0315/01: RNCC: 3 | RNVC: 2
199C/01: RNCC: 5 | RNVC: 2

1 Nov 1991

5120-99-454-7695
Open End Wrench

994547695
UCW853-441: RNCC: 3 | RNVC: 2
720583: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-667-8517
Seal Inserter

996678517
MC1248552: RNCC: 3 | RNVC: 2

27 Jan 2011

5120-99-701-5051
Spanner Wrench

997015051
FV 2206169: RNCC: 3 | RNVC: 2

12 Apr 1999

5120-99-461-9697
Assembly Tool

994619697
NO PRIMARY REF 99-461-9697: RNCC: 3 | RNVC: 2
HP225-1: RNCC: 5 | RNVC: 2
27Z1029: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-858-5774
Wrench Extension Handle

998585774
331/32597: RNCC: 3 | RNVC: 2
331/32597: RNCC: 5 | RNVC: 2
331/32597: RNCC: 5 | RNVC: 2

24 Jun 2009

5120-99-798-1710
Crimping Tool Die

997981710
BS5310 PART 2B-VB: RNCC: 2 | RNVC: 2
BS5310-2B/VB: RNCC: 5 | RNVC: 2
H23535: RNCC: 5 | RNVC: 2
BS5310 PART 2B: RNCC: 6 | RNVC: 9
VB: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-717-5246
Screw Thread Insert Inserter

997175246
PE57203: RNCC: 3 | RNVC: 2
HC22892DET2: RNCC: 5 | RNVC: 2
ST1088: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-322-2845
Seal & Bu Installer

993222845
DROP321V-4: RNCC: 3 | RNVC: 2
E412VLC: RNCC: 6 | RNVC: 9
DROP321-4/1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-962-5616

5120-99-795-6250

5120-99-802-6474
Cleaning Extension

5120-99-552-6764
Socket Wrench

5120-99-614-8739
Seal Assembly Tool

996148739
H39739A4: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-7000
Spanner Wrench

996177000
AE5498: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-716-9090
Bearing Separator

997169090
951: RNCC: 3 | RNVC: 2
1123: RNCC: 5 | RNVC: 2
095100: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-439-4438
Socket Wrench Socket

994394438
BS4006: RNCC: 4 | RNVC: 1
F1FA17518: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-418-4839
Bearing Pusher

5120-99-418-4860
Puller

5120-99-422-7492

5120-99-432-8867

5120-99-763-9182
Socket Head Scr Key

5120-99-804-7906

5120-99-051-0280
Flexibl Hook Wrench

990510280
90-155: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-2835
Two Pin Tool

997692835
DR3180-0040-SA: RNCC: 3 | RNVC: 2

16 Apr 1993

5120-99-546-9225
Extractor T Support

5120-99-254-4396
Torquebre Extension

992544396
C6449B 1/2: RNCC: 3 | RNVC: 2
1C-8787: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-154-2606
Drive Pin Punch

991542606
AML16951: RNCC: 3 | RNVC: 2
AML16951: RNCC: 5 | RNVC: 2

4 Nov 1999

5120-99-362-1667
Seal Inserter

993621667
MBEU58830: RNCC: 3 | RNVC: 2

24 Jul 2004

5120-99-120-9541
Extens Ring Spanner

991209541
1209541: RNCC: 3 | RNVC: 2
1701081: RNCC: 5 | RNVC: 2
T2EN6977: RNCC: 5 | RNVC: 2
1L1209541: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-016-5019
Thyristor Fitt Tool

990165019
RCD3688: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-4485
Open End Wrench

991204485
1REFDWGGP261: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-910-6313
Socket Wrench Extension

999106313
BS4006-TABLE 28 9/32 A/F: RNCC: 4 | RNVC: 1
H20181: RNCC: 5 | RNVC: 2
1L1: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4552: RNCC: 6 | RNVC: 9
FA17540: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-227-8772
T Installation Tool

992278772
WG1388-3293-041: RNCC: 3 | RNVC: 2
XP98PA01488: RNCC: 6 | RNVC: 9

23 Jan 1998

5120-99-350-3392
Mechanical Puller

993503392
16YJ70305: RNCC: 3 | RNVC: 2
LE441B3: RNCC: 6 | RNVC: 9
E022-231441: RNCC: 6 | RNVC: 9

6 Nov 1996

5120-99-120-0939
Plier Wrench

991200939
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
14200: RNCC: 5 | RNVC: 2
75025: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H4611: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-8695
Steering Extractor

999108695
LC 445: RNCC: 3 | RNVC: 2
LC 445/4: RNCC: 5 | RNVC: 2
0485150: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-790-2293
Socket Wrench Crowfoot Attachment

997902293
UT856/1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-335-4260
Seal Inserter

993354260
48417-A8/A: RNCC: 3 | RNVC: 2

26 Nov 2004

5120-99-212-6401
Hammerdriver

992126401
NO PRIMARY REF 99-212-6401: RNCC: 3 | RNVC: 2
101200001: RNCC: 5 | RNVC: 2
B173-TT7770665: RNCC: 6 | RNVC: 9

23 Dec 2003

5120-99-826-5368
Removal Tool Assemb

998265368
NO PRIMARY REF 99-826-5368: RNCC: 3 | RNVC: 2
VT12819: RNCC: 5 | RNVC: 2

30 Jul 1980

5120-99-983-0062
Lifting Ring

999830062
DP8118-1: RNCC: 3 | RNVC: 2
DP8118: RNCC: 5 | RNVC: 2
118341ST: RNCC: 6 | RNVC: 9

8 Mar 1990

5120-99-825-5402
Front Pilot Camshaf

998255402
NO PRIMARY REF 99-825-5402: RNCC: 3 | RNVC: 2
18G123T: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-797-6792
Seal Guide

997976792
CH748-345: RNCC: 3 | RNVC: 2
CHA748-345: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-879-0826
Ring

998790826
EA6305G548-101: RNCC: 3 | RNVC: 2
1MEVGFG: RNCC: 6 | RNVC: 9

16 Apr 2004

5120-99-532-6353
Open End Wrench

995326353
SC200: RNCC: 3 | RNVC: 2
K149-149017: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-850-0468
Socket Spann Socket

998500468
4546008-020: RNCC: 3 | RNVC: 2
FK97CB10001: RNCC: 6 | RNVC: 9

17 Sep 1997

5120-99-877-1470
Polishing Tool

998771470
927-100-2027: RNCC: 3 | RNVC: 2
020SI-004: RNCC: 6 | RNVC: 9

12 Mar 2002

5120-99-776-0190
Lockwasher Ins Tool

997760190
EA6305G597-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-745-9378
Spanner Wrench

997459378
T7038-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-620-8406
Pi Spanner Assembly

996208406
ARR9583-220A: RNCC: 3 | RNVC: 2
11A7353: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-582-5732
Socket Wrench Socket

995825732
GD600150-001: RNCC: 3 | RNVC: 2

28 Apr 2005

5120-99-532-6354
Socket Wrench

995326354
SC212: RNCC: 3 | RNVC: 2
K149-149073: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-794-4723
Slave Ring

997944723
AE5500: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-786-8776
Friction Igniter

997868776
CN330: RNCC: 3 | RNVC: 2

14 Oct 2003

5120-99-907-1582
Drift

999071582
999 6171: RNCC: 3 | RNVC: 2
FH980420144: RNCC: 6 | RNVC: 9

26 Jun 1998

5120-99-428-1256
Beesw Removing Tool

994281256
NO PRIMARY REF 99-428-1256: RNCC: 3 | RNVC: 2
DDTM3484: RNCC: 5 | RNVC: 2
517377: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-459-0459
Socket Wrench Crowfoot Attachment

994590459
PE1202: RNCC: 3 | RNVC: 2
64AC143: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-662-1758
Tow Roof Sight Purg

5120-99-782-1110
Open End Wrench

997821110
6J3137: RNCC: 3 | RNVC: 2
H20214: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-817-4353
Socket Wrench Socket

998174353
STMMD8 LOCKON: RNCC: 3 | RNVC: 2

11 Mar 1993

5120-99-910-5426
Wood Mallet

999105426
A3/9857: RNCC: 3 | RNVC: 2
E533: RNCC: 5 | RNVC: 1
F1FA15122: RNCC: 6 | RNVC: 9
1B1547: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-207-8938
Spigot Assembly

992078938
NO PRIMARY REF 99-207-8938: RNCC: 3 | RNVC: 2
0EB1466: RNCC: 5 | RNVC: 2
GMB75984: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-320-0574
Flat Tip Screwdriver

993200574
621-297: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-832-4755
Manometer

998324755
ST1111/3: RNCC: 3 | RNVC: 2
ST7029: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-433-4187
Cable Rod

994334187
T-CZLA-7-100: RNCC: 3 | RNVC: 2
076KY-012: RNCC: 6 | RNVC: 9

8 Feb 2008

5120-99-297-7396
Spanner

992977396
NO PRIMARY REF 99-297-7396: RNCC: 3 | RNVC: 2
T 399242: RNCC: 5 | RNVC: 2
64LL1497: RNCC: 6 | RNVC: 9

19 Aug 2005

5120-99-655-3821
Mechanical Puller

996553821
CHA754-328-405: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-801-3274

5120-99-801-3237

5120-99-676-6598
Spanner Wrench

996766598
SGE3210-3600: RNCC: 3 | RNVC: 2

29 May 2012

5120-99-654-4011
Face Spanner Wrench Socket

996544011
460009283C: RNCC: 3 | RNVC: 2

31 May 1996

5120-99-424-9012
Hand Contact Burnisher

994249012
23-56978: RNCC: 3 | RNVC: 2
BKA502368: RNCC: 5 | RNVC: 2
0624-10AG784: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-171-1514
Crank Puller

991711514
NO PRIMARY REF 99-171-1514: RNCC: 3 | RNVC: 2
023S10109: RNCC: 5 | RNVC: 2

21 Mar 2003

5120-99-826-4641
Setting Block

998264641
NO PRIMARY REF 99-826-4641: RNCC: 3 | RNVC: 2
83780002: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-936-7800
Holding Tool

999367800
303-1334: RNCC: 3 | RNVC: 2
303-1334: RNCC: 5 | RNVC: 2

13 Dec 2011

5120-99-825-6485
Lighting Main Winch

998256485
NO PRIMARY REF 99-825-6485: RNCC: 3 | RNVC: 2
FV824518: RNCC: 5 | RNVC: 2

24 Aug 1977

5120-99-667-5278
Bearing And Bushing Inserter And Remover

996675278
308-544: RNCC: 3 | RNVC: 2
LRT-37-044: RNCC: 5 | RNVC: 2

16 Dec 2009

5120-99-538-6424
Extractor Assembly

995386424
NO PRIMARY REF 99-538-6424: RNCC: 3 | RNVC: 2
F45314: RNCC: 5 | RNVC: 2
BF45314: RNCC: 5 | RNVC: 2
H454-538-6424: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-756-8830
Spanner Wrench

997568830
T7069-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-756-8835
Open End Wrench

997568835
T7035-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-929-2072
Pinion Gear To Tool

999292072
WG1488-0157-041: RNCC: 3 | RNVC: 2

22 Dec 2012

5120-99-468-8397
Spanner

5120-99-417-3261

5120-99-402-6068

5120-99-253-6914
Socket Wrench Handle

992536914
11-P461S1214: RNCC: 3 | RNVC: 2
20225A: RNCC: 5 | RNVC: 1
T.736/16/4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-252-4811
Screwdriver Bit

992524811
49-B-TX-07: RNCC: 3 | RNVC: 2
ET541699/1B: RNCC: 5 | RNVC: 2
49-B-TX-07: RNCC: 6 | RNVC: 9
1C/8647: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-7605
Spanner

994547605
NO PRIMARY REF 99-454-7605: RNCC: 3 | RNVC: 2
720137: RNCC: 5 | RNVC: 2

19 Mar 1990

5120-99-439-4691
Key

994394691
NO PRIMARY REF 99-439-4691: RNCC: 3 | RNVC: 2
RCK40: RNCC: 5 | RNVC: 2
W18WT00407: RNCC: 6 | RNVC: 9

12 Feb 1980

5120-99-659-7351
Mechanical Puller

996597351
CHA755-039-407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-617-7024
Bar Handle Extensio

996177024
AE5507: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-583-0825
Settling Rod Gland

995830825
MC1277211: RNCC: 3 | RNVC: 2

11 Oct 2002

5120-99-205-8278
Fulcrum Block

992058278
GMA54511: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-423-0946
Support Sleeve

994230946
KH17: RNCC: 3 | RNVC: 2
4Q2766: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-148-0898
Hydraulic Tensioner

991480898
80.861.02611.200: RNCC: 3 | RNVC: 2
80.861.02611.200: RNCC: 5 | RNVC: 2

14 Jan 2009

5120-99-257-3946
Crimping Die

992573946
16-1143: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-2474
Socket Wrench Adapter

991242474
APDP: RNCC: 3 | RNVC: 2
REA212: RNCC: 3 | RNVC: 2
BS4006: RNCC: 4 | RNVC: 1
DEF STAN 51-11 PART 4: RNCC: 4 | RNVC: 1
TABLE 35 6.30MM X 10MM FORM A: RNCC: 6 | RNVC: 9
TABLE I(G) 1/4X3/8A/F: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-492-9431
Flat Tip Screwdriver

994929431
TL-502-270: RNCC: 3 | RNVC: 2
TL-502-270: RNCC: 3 | RNVC: 9

28 Oct 2008

5120-99-428-9799
Watc Covering Glass

994289799
NO PRIMARY REF 99-428-9799: RNCC: 3 | RNVC: 2
F1FA19415: RNCC: 5 | RNVC: 2

12 Oct 1988

5120-99-910-6586
Craftsman's Tweezers

999106586
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
11-1010-FINE: RNCC: 5 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2930: RNCC: 6 | RNVC: 9
1C3545: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-4482
Socket Head Screw Key

998104482
825/10022: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-717-1038
Socket Wrench Socket

997171038
ED875: RNCC: 3 | RNVC: 2
DSR2043-7: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-543-6684
Screwdriver

995436684
1-0WE158737: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-919-1508
Wrench

999191508
NO PRIMARY REF 99-919-1508: RNCC: 3 | RNVC: 2
030-1120: RNCC: 5 | RNVC: 2
C579-LWR010381: RNCC: 5 | RNVC: 2

15 Jun 2001

5120-99-131-5704
Mechanical Puller

991315704
01TC15700: RNCC: 3 | RNVC: 2
TORNADO-7691: RNCC: 6 | RNVC: 9

6 Jan 2003

5120-99-827-9166
Nipple Forming Tool

998279166
99-105: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-488-7934
Pneumatic Tire Valve Repair Tool

994887934
11502: RNCC: 3 | RNVC: 2
DML040060: RNCC: 5 | RNVC: 2
10-99-572: RNCC: 5 | RNVC: 2

13 Jul 2007

5120-99-654-5652
Hexagon Key

996545652
NO PRIMARY REF 99-654-5652: RNCC: 3 | RNVC: 2
11584090-00-2: RNCC: 5 | RNVC: 2

10 Jul 1980

5120-99-456-2070
Screw Extracting Drill Guide

994562070
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
F1FA13191: RNCC: 6 | RNVC: 9

25 Jan 1991

5120-99-401-3589
Hydraulic Extractor

994013589
150000: RNCC: 3 | RNVC: 2
1500: RNCC: 5 | RNVC: 2
40: RNCC: 5 | RNVC: 2
FH70-8-1-5701: RNCC: 6 | RNVC: 9
1A4013589: RNCC: 6 | RNVC: 9
16C6159: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-159-5148
Socket Head Screw Key

991595148
209-042740: RNCC: 3 | RNVC: 2

6 Feb 2002

5120-99-549-3735
Bit Bristol

995493735
NO PRIMARY REF 99-549-3735: RNCC: 3 | RNVC: 2
SB2SSB-2SSB2: RNCC: 5 | RNVC: 2
0938-LLX001679: RNCC: 6 | RNVC: 9

13 Jul 2001

5120-99-187-1811
Torque Wrench

991871811
NO PRIMARY REF 99-187-1811: RNCC: 3 | RNVC: 2
663-881: RNCC: 5 | RNVC: 2

6 Nov 2002

5120-99-763-1101
Socket Head Screw Key

997631101
NO PRIMARY REF 99-763-1101: RNCC: 3 | RNVC: 2
035SHORT: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-752-7253
Seal Lead

997527253
AE5262: RNCC: 3 | RNVC: 2
85-690-1477: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-118-2206
Pre-Assembly Tool

991182206
VOMO20S: RNCC: 3 | RNVC: 2
114084ST: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-710-7343
Drive Pin Punch

997107343
161AA: RNCC: 3 | RNVC: 2
100192: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-718-9820
Extractor

997189820
WD4188-00837-101: RNCC: 3 | RNVC: 2

12 Feb 1980

5120-99-961-8340
Plain Swaging Punch

999618340
NO PRIMARY REF 99-961-8340: RNCC: 3 | RNVC: 2
C1BD2659: RNCC: 5 | RNVC: 2

11 Dec 1981

5120-99-836-5077
Socket Wrench Socket

998365077
NO PRIMARY REF 99-836-5077: RNCC: 3 | RNVC: 2
28503: RNCC: 5 | RNVC: 2

11 Jun 2004

5120-99-124-0750

5120-99-643-1780

5120-99-628-8091

5120-99-623-1652
Circ Insertion Tool

996231652
894700: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-1989
Mechanical Puller

996171989
HU21349: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-577-3766
Pin Alignm Tool Kit

995773766
CSDE/CHK/GSS/159: RNCC: 3 | RNVC: 2

22 Mar 1996

5120-99-008-0973
Hand Terminal Crimping Tool

990080973
9008180000: RNCC: 3 | RNVC: 2
193-972: RNCC: 5 | RNVC: 2
901227: RNCC: 5 | RNVC: 2
HTG58-59: RNCC: 5 | RNVC: 2

8 Aug 1995

5120-99-140-9445
Insertion And Extra

991409445
C1ETCTA2: RNCC: 3 | RNVC: 2
C1ETCTA2: RNCC: 5 | RNVC: 2
56810-143: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-1275
Socket Wrench Socket

991301275
1MFD262: RNCC: 3 | RNVC: 2
1L495: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-194-3128
Fi Open Jaw Spanner

991943128
SCA82118: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-549-5667
Lifting Tool

995495667
2 0057-463: RNCC: 3 | RNVC: 2

7 Mar 2003

5120-99-601-1771
Lid Locking Tool

996011771
NO PRIMARY REF 99-601-1771: RNCC: 3 | RNVC: 2
MC495217-7: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-660-8628
Box Spanner

996608628
910201602: RNCC: 3 | RNVC: 2

18 Jul 2000

5120-99-796-0807
Flat Tip Screwdriver

997960807
P501/4: RNCC: 3 | RNVC: 2

15 Oct 1990

5120-99-828-2495
Heat Exchan Adaptor

998282495
V1684/1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-736-3575
Vise Jaw Caps

997363575
NO PRIMARY REF 99-736-3575: RNCC: 3 | RNVC: 2
546-332: RNCC: 5 | RNVC: 2

4 Jan 1991

5120-99-915-1742
Ratchet Wrench

999151742
D72: RNCC: 3 | RNVC: 2
26116: RNCC: 5 | RNVC: 2
RSJ-9: RNCC: 5 | RNVC: 2
8-2-937: RNCC: 5 | RNVC: 2
746-058390: RNCC: 6 | RNVC: 9
H577-374887: RNCC: 6 | RNVC: 9
H746-058390: RNCC: 6 | RNVC: 9
4S92: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-7661
Spanner Wrench

994547661
MDSK853-105: RNCC: 3 | RNVC: 2
720244: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-763-1598
Standard Rod End

997631598
980M/125: RNCC: 3 | RNVC: 2
980M/125: RNCC: 6 | RNVC: 9
1A4883: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-0989
Tube Spanner

991500989
AE5537: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-6376
Flat Tip Screwdriver

997106376
421: RNCC: 3 | RNVC: 2
P400: RNCC: 3 | RNVC: 2
PE25310: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-636-0597
Open End Wrench

996360597
RDFA8303: RNCC: 3 | RNVC: 2
RFDA8303: RNCC: 6 | RNVC: 9
27C2629: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-468-5380
Spanner Wrench

994685380
AE0511: RNCC: 3 | RNVC: 2
27M11960: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-887-6418
Torque Wrench Adapter

998876418
OIT-C-14991: RNCC: 3 | RNVC: 2
01T-C-14991: RNCC: 5 | RNVC: 2
01TC14991: RNCC: 6 | RNVC: 9
01TC14991: RNCC: 6 | RNVC: 9

27 Sep 1991

5120-99-923-9079
Retaining Ring Pliers

999239079
S1B: RNCC: 3 | RNVC: 2
08-0847-4: RNCC: 5 | RNVC: 2
99-07209: RNCC: 5 | RNVC: 2
F1G6546RS1B: RNCC: 5 | RNVC: 2
P461ZS003/2: RNCC: 5 | RNVC: 2
BDC4293: RNCC: 5 | RNVC: 2
0275-923-9079: RNCC: 6 | RNVC: 9
H727-460358: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-549-6178
Hand Terminal Crimping Tool

995496178
AE8383GSE: RNCC: 3 | RNVC: 2
07491-011: RNCC: 6 | RNVC: 9

21 Aug 2003

5120-99-138-7275
Drive Pin Punch

991387275
MCDN33548-138-7275: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-469-9627
Extractor

994699627
NO PRIMARY REF 99-469-9627: RNCC: 3 | RNVC: 2
ST1963: RNCC: 5 | RNVC: 9
27Q13569: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-999-4270

5120-99-538-2688
Stuffing Extractor

5120-99-577-1455
Stud Remover

995771455
00846060: RNCC: 3 | RNVC: 2
3V84G0251: RNCC: 5 | RNVC: 2
846060: RNCC: 5 | RNVC: 2

23 Apr 1999

5120-99-083-4465
Diffuser Tool

990834465
074.229.00: RNCC: 3 | RNVC: 2

13 May 1998

5120-99-382-7014
Injector Sleev Tool

993827014
OD60022: RNCC: 3 | RNVC: 2

1 Jul 1997

5120-99-756-8802
Torque Wrench Adapter

997568802
D3592-738C-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-101-5807
Wrench Spanner

991015807
NO PRIMARY REF 99-101-5807: RNCC: 3 | RNVC: 2
A30661: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-730-0178
Nut Spinner

997300178
BE-7855: RNCC: 3 | RNVC: 2
01-0920: RNCC: 5 | RNVC: 2

28 Nov 2003

5120-99-610-0612
Insertion Tool

996100612
NO PRIMARY REF 99-610-0612: RNCC: 3 | RNVC: 2
CHA648-047: RNCC: 5 | RNVC: 9
CHA648-249: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-671-5310
Crimping Tool

996715310
DD5711/14: RNCC: 3 | RNVC: 2

23 Nov 2006

5120-99-442-1120
Hand Screw Jack

994421120
GMC13157: RNCC: 3 | RNVC: 2
4G7141: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-551-8922
Pry Bar

995518922
A0103387: RNCC: 3 | RNVC: 2

14 Oct 2010

5120-99-718-8452
Mechanical Puller

997188452
HU18842-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-667-2683
Cross Tip Screwdriver

996672683
T-30251: RNCC: 3 | RNVC: 2
T-30251: RNCC: 5 | RNVC: 2

20 Jan 2009

5120-99-910-5456
Wood Mallet Head

999105456
C1S933-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-979-2031
Screwdriver Bit Set

999792031
P-51976: RNCC: 3 | RNVC: 2

30 Mar 2007

5120-99-230-2642
Flat Tip Screwdriver

992302642
1-67-406: RNCC: 3 | RNVC: 2

22 Jun 2000

5120-99-910-6071
Socket Head Screw Key

999106071
BS2470: RNCC: 4 | RNVC: 1
W.9/16 SHORT ARM SERIES: RNCC: 5 | RNVC: 2
FA19625: RNCC: 6 | RNVC: 9
88621-620-107: RNCC: 6 | RNVC: 9
1C6254: RNCC: 6 | RNVC: 9
DWS437-14: RNCC: 6 | RNVC: 9
TABLE 8 9/16A/F SHORT SERIES: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-6423
Retaining Ring Pliers

997106423
IBS: RNCC: 3 | RNVC: 2
PE15512: RNCC: 5 | RNVC: 1
PE15512: RNCC: 5 | RNVC: 1
025-005-00: RNCC: 5 | RNVC: 2
D/ST55/302/9/89: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6634
Pipe Wrench

999106634
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
BS3594 PART 2-TABLE 1 9IN.: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
H3021: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-386-7899
Hand Hammer

993867899
CC-104017-21: RNCC: 3 | RNVC: 2
CC-104017-21: RNCC: 8 | RNVC: 1

23 Mar 2002

5120-99-910-4422
Parallel Drift

999104422
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H20003: RNCC: 5 | RNVC: 2
FS1/2-190: RNCC: 5 | RNVC: 2
DL-9-A-H598: RNCC: 6 | RNVC: 9
H598: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
FA11652: RNCC: 6 | RNVC: 9
7S2728: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-964-2508
Piston Tool Adaptor

999642508
AMD7370-450B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-964-8256
Wrench Spanner

999648256
NO PRIMARY REF 99-964-8256: RNCC: 3 | RNVC: 2
SS30T103: RNCC: 5 | RNVC: 2
0S87812: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-4616
Smith Bottom Fuller

999104616
H917: RNCC: 3 | RNVC: 2
NO PRIMARY REF 99-910-4616: RNCC: 3 | RNVC: 2
FA13751: RNCC: 6 | RNVC: 9

4 Feb 1984

5120-99-880-3583
Hand Hydraulic Jack

998803583
AFRE352: RNCC: 3 | RNVC: 2
022UV-001: RNCC: 6 | RNVC: 9

18 Sep 2002

5120-99-655-3874
Mechanical Puller

996553874
CHA1072-035-403: RNCC: 3 | RNVC: 2
CH1072-035-403: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-179-7427
Open End Wrench

991797427
SLA 6706: RNCC: 3 | RNVC: 2
T2AB4114: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-378-4614
Removal-Replace Too

993784614
S022-DDS-5945: RNCC: 3 | RNVC: 2

20 Feb 2007

5120-99-480-7953
Spanner

994807953
NO PRIMARY REF 99-480-7953: RNCC: 3 | RNVC: 2
KB6059: RNCC: 5 | RNVC: 2
64VV-2807: RNCC: 6 | RNVC: 9

25 Nov 2004

5120-99-960-3475

5120-99-971-5726

5120-99-541-9430
Socket Wrenc Socket

5120-99-422-5709
Box Wrench

5120-99-722-9960
Drive Pin Punch

997229960
FV 905050: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-99-468-3037
Spanner Wrench

994683037
FHQ759: RNCC: 3 | RNVC: 2
27KF1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-732-0549
Torque Wrenc Insert

997320549
84770304: RNCC: 3 | RNVC: 2
277 070: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-609-5353
Face Spanner Wrench Socket

996095353
PE50994: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-8482
Grommet Inserting Punch And Die

991368482
1TEM3-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-791-4329
Converter Leak Test

997914329
J21369-D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-970-5915
Electronic Equipment Alignment Tool

999705915
HS2: RNCC: 3 | RNVC: 2
10AG730: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-953-8458
Torque Wrench

999538458
A20: RNCC: 3 | RNVC: 2
H21463: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-953-4416
Socket Wrench Extension

999534416
A96: RNCC: 3 | RNVC: 2
H20109: RNCC: 5 | RNVC: 2
T2EC1292: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-731-8792
Screw Thre Inserter

997318792
9863-7: RNCC: 3 | RNVC: 2
85/0119/019/0010/01809: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-779-0988
Flexible Conduit Ferrule Swaging Tool

997790988
16-0235: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-4631
Hand Hammer

999104631
NO PRIMARY REF 99-910-4631: RNCC: 3 | RNVC: 2
BS876: RNCC: 5 | RNVC: 2
1K76: RNCC: 6 | RNVC: 9
FA14090: RNCC: 6 | RNVC: 9
910-4631: RNCC: 6 | RNVC: 9

22 Sep 1988

5120-99-910-4641
Hand Hammer

999104641
DL9A-H1197: RNCC: 2 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 2
H1197: RNCC: 6 | RNVC: 9
910-4641: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-973-7260
Socket Wrench Spanner Attachment

999737260
0382-6022: RNCC: 3 | RNVC: 2
0393-6022: RNCC: 6 | RNVC: 9

1 Jun 2001

5120-99-665-4601
Shaft Assembly Tool

996654601
NTS14750: RNCC: 3 | RNVC: 2
NTS14750: RNCC: 5 | RNVC: 2

4 Dec 2001

5120-99-429-4388
Claw Spanner

5120-99-428-8985

5120-99-733-5690
Braid Flaring Tool

997335690
TBF-RG178CX: RNCC: 3 | RNVC: 2
1035876-1: RNCC: 5 | RNVC: 2
1H/1378: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-444-8102
Locking Tool Punch

994448102
HU23073-01: RNCC: 3 | RNVC: 2

11 Aug 2003

5120-99-250-1909
Oil Filter Wrench

992501909
NO PRIMARY REF 99-250-1909: RNCC: 3 | RNVC: 2
90890-01426YU-38411: RNCC: 5 | RNVC: 2

7 Mar 2008

5120-99-260-8507
Wrench Spanner

992608507
NO PRIMARY REF 99-260-8507: RNCC: 3 | RNVC: 2
50752: RNCC: 5 | RNVC: 2
A525-88-2006818: RNCC: 6 | RNVC: 9

11 Dec 2002

5120-99-130-1889
Sprin Tension Gauge

991301889
56978-0021: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-538-6394
Dolly

995386394
NO PRIMARY REF 99-538-6394: RNCC: 3 | RNVC: 2
F45262: RNCC: 5 | RNVC: 2
BF45262: RNCC: 5 | RNVC: 2
H454-538-6394: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-630-2606
Spindle

996302606
EH2089: RNCC: 3 | RNVC: 2
B21-32-2089: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-547-1089
Spanner Wrench

995471089
NRST1044: RNCC: 3 | RNVC: 2
723270: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-777-5411
Torque Wrench

997775411
S200-1: RNCC: 3 | RNVC: 2
850305-4: RNCC: 5 | RNVC: 2
PCT55270: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-179-5037
C Clamp

991795037
62913-A6: RNCC: 3 | RNVC: 2

30 Jul 2002

5120-99-891-6935
Electrical Contact Remover

998916935
8609 78: RNCC: 3 | RNVC: 2
8609 78: RNCC: 5 | RNVC: 2

7 Mar 1994

5120-99-252-3668
Barring Hub

992523668
394-15320: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-450-0946
Pliers

994500946
NO PRIMARY REF 99-450-0946: RNCC: 3 | RNVC: 2
181-733: RNCC: 5 | RNVC: 2
3763DS: RNCC: 5 | RNVC: 2

3 Feb 2000

5120-99-718-5769
Open End Wrench

997185769
1703054: RNCC: 1 | RNVC: 2
DA1214: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-718-8445
Socket Wrench Extension

997188445
1703092: RNCC: 1 | RNVC: 2
405S: RNCC: 3 | RNVC: 2
1209553: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-199-0261
Square Driv Adaptor

991990261
NO PRIMARY REF 99-199-0261: RNCC: 3 | RNVC: 2
50-67: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-660-5717
Allen Key Set

996605717
NO PRIMARY REF 99-660-5717: RNCC: 3 | RNVC: 2
H24023: RNCC: 5 | RNVC: 2
618-932: RNCC: 5 | RNVC: 2

11 Mar 1993

5120-99-617-1992
Extraction Lever

996171992
HU21360/1: RNCC: 3 | RNVC: 2
HU21360: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-792-4957
Ratchet Leve Handle

997924957
6204: RNCC: 3 | RNVC: 2
2C: RNCC: 5 | RNVC: 2
AB/5/2/13203/1B: RNCC: 5 | RNVC: 2
001/03 SCALE 03370-16/5/91: RNCC: 6 | RNVC: 9

16 Sep 1991

5120-99-824-1425
H Cylinder Assembly

998241425
NO PRIMARY REF 99-824-1425: RNCC: 3 | RNVC: 2
9S8901: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-993-9146
Socket Wrench Socket

999939146
11P461/1019/3: RNCC: 3 | RNVC: 2

16 Jul 1998

5120-99-614-8700
Drive Pin Punch

996148700
HST121-0469: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-7072
Socket Wrench Socket

991387072
EBM27: RNCC: 3 | RNVC: 2
HSM227: RNCC: 3 | RNVC: 2
BS4006-TABLE 13 27MM: RNCC: 4 | RNVC: 1
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-212-8272
Cartridge Opener

992128272
395397: RNCC: 3 | RNVC: 2
395397: RNCC: 5 | RNVC: 2
052J3-036: RNCC: 6 | RNVC: 9
WKAT-395397: RNCC: 6 | RNVC: 9

21 Jul 2005

5120-99-465-7213
Crowfoot Attachment

994657213
T77774: RNCC: 3 | RNVC: 2
PE50006: RNCC: 5 | RNVC: 2
64DE21: RNCC: 6 | RNVC: 9
64DE21: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-369-1535
Socket Wrench Socket

993691535
NM55A: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-120-9770
Socket Wrench Screwdriver Attachment

991209770
H6357: RNCC: 2 | RNVC: 2
E33-500: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1

25 Apr 1991