What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 69 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 69 of 108

5120-99-448-9875

5120-99-436-0367
Locking Punch

5120-99-252-4817

5120-99-445-5933

5120-99-111-6393
Elec Alignment Tool

991116393
NO PRIMARY REF 99-111-6393: RNCC: 3 | RNVC: 2
C16861: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-146-2931
Transmission Wrench

991462931
S6170-35413: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-401-3149
Hub Loc Box Spanner

994013149
NO PRIMARY REF 99-401-3149: RNCC: 3 | RNVC: 2
16C5636: RNCC: 5 | RNVC: 2

12 Jul 1979

5120-99-194-1564
Electronic Equipment Alignment Tool

991941564
95-07250: RNCC: 3 | RNVC: 2
A95-07250: RNCC: 5 | RNVC: 2
10AG984: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-407-4151
Torque Spa Nose Nut

994074151
1307-99260-29: RNCC: 3 | RNVC: 2
1307-99260: RNCC: 5 | RNVC: 2

23 Aug 2002

5120-99-352-8418
Socket Wrench Socket

993528418
4305M-11: RNCC: 3 | RNVC: 2
3711510C1: RNCC: 5 | RNVC: 2
KK4305M-11: RNCC: 5 | RNVC: 2
KK4305M-11: RNCC: 5 | RNVC: 2

23 Mar 2010

5120-99-225-6116
Spanner Wrench

992256116
108-016: RNCC: 3 | RNVC: 2

6 Sep 2000

5120-99-910-4689
Hand Hammer

999104689
DL9A-H1244: RNCC: 2 | RNVC: 2
H1244: RNCC: 5 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 2
910-4869: RNCC: 6 | RNVC: 9
H1244: RNCC: 6 | RNVC: 9
1B2558: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-467-7353
Spanner Wrench

994677353
P100-88-240: RNCC: 3 | RNVC: 2
27KC3740: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-7728
Bla Turning Fixture

997107728
NO PRIMARY REF 99-710-7728: RNCC: 3 | RNVC: 2
100A500031A: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-423-8258
Horizon Pin Spanner

994238258
NO PRIMARY REF 99-423-8258: RNCC: 3 | RNVC: 2
9032-72: RNCC: 5 | RNVC: 2
558861: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-124-0766
Hand Terminal Crimping Tool

991240766
59461: RNCC: 3 | RNVC: 2
1H468: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-231-4175
Special Purpose Combination Wrench

992314175
QZ13690: RNCC: 3 | RNVC: 2

14 Dec 2011

5120-99-545-4665
Crowfoot Spanner

5120-99-910-7746
Rivet Bucking Bar

999107746
DEF1221-H585: RNCC: 2 | RNVC: 2
DEF1221: RNCC: 5 | RNVC: 2
H585: RNCC: 6 | RNVC: 9
1C5397: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-832-3129
Ratchet Wrench

998323129
H325-944770: RNCC: 3 | RNVC: 2
NO3/8INAFSQUARE FEMALE: RNCC: 5 | RNVC: 2
LE462D3: RNCC: 6 | RNVC: 9
LE463B1: RNCC: 6 | RNVC: 9
N001-944770: RNCC: 6 | RNVC: 9
H325-944770: RNCC: 6 | RNVC: 9
N001-944770: RNCC: 6 | RNVC: 9

9 May 1996

5120-99-557-6000
Spring Adjuster

995576000
56978-0028: RNCC: 3 | RNVC: 2
0028-56978: RNCC: 5 | RNVC: 2
56978DET0028: RNCC: 5 | RNVC: 2
363-363314: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-3502
Screw Thread Insert Inserter

991373502
M1P120: RNCC: 3 | RNVC: 2
DEFSTAN51-17: RNCC: 4 | RNVC: 1
1B: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-5814
Extractor Assembly

996075814
NO PRIMARY REF 99-607-5814: RNCC: 3 | RNVC: 2
PE28398: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-838-3299
Clamping Block

998383299
SGE3240-2203: RNCC: 3 | RNVC: 2

3 Apr 2013

5120-99-910-4630
Hand Hammer

999104630
BS876: RNCC: 4 | RNVC: 1
PATT NO 303: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 31: RNCC: 6 | RNVC: 9
FA14085: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
H1183: RNCC: 6 | RNVC: 9
1K75: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-408-0208
Drive Pin Punch

994080208
6820050-014: RNCC: 3 | RNVC: 2

18 Apr 2004

5120-99-300-5515
Spanner Wrench Handle

993005515
WG1488-0154-105: RNCC: 3 | RNVC: 2

22 Dec 2012

5120-99-457-4011
Cart Reforming Tool

994574011
NO PRIMARY REF 99-457-4011: RNCC: 3 | RNVC: 2
518254: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-239-2358
Lead-In

992392358
110079-275: RNCC: 3 | RNVC: 2
26VC-95225: RNCC: 6 | RNVC: 9

2 Oct 2004

5120-99-580-5424
Coil Thread Nozzle

995805424
A30-4: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-655-1562
Spanner Wrench

996551562
460009281C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-110-0823
Socket Wrench

991100823
F2083: RNCC: 3 | RNVC: 2
FM9929V: RNCC: 6 | RNVC: 9

4 Mar 2000

5120-99-713-6350

5120-99-713-7641

5120-99-662-9934
Ha Adapter Assembly

5120-99-787-9808
Valve Cleara Pliers

5120-99-640-0725

5120-99-375-3494
Screw Thre Inserter

5120-99-513-5653
Ratchet Wrench

995135653
3: RNCC: 3 | RNVC: 1
SIZE 3: RNCC: 5 | RNVC: 1

8 Apr 1992

5120-99-910-7825
Tinman Groove Punch

999107825
H2912: RNCC: 2 | RNVC: 2
102-3/8: RNCC: 3 | RNVC: 2
F1FA18172: RNCC: 6 | RNVC: 9
1B2890: RNCC: 6 | RNVC: 9
H2912: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-617-1986
Face Spanner Wrench Socket

996171986
HU.21181/1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-190-6861
Pilot Bearin Puller

991906861
954-C: RNCC: 3 | RNVC: 2
982S40024: RNCC: 6 | RNVC: 9

14 Jun 1999

5120-99-718-7866
Socket Wrench Adapter

997187866
1700041: RNCC: 1 | RNVC: 2
409S: RNCC: 3 | RNVC: 2
KMA3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-469-7684
Box Wrench

994697684
ST1230: RNCC: 3 | RNVC: 2
CST1230: RNCC: 5 | RNVC: 2
27Q12381: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-201-7848
Spanner Wrench

992017848
FV 466151: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-131-3093
Spanner Wrench

991313093
110079-15875: RNCC: 3 | RNVC: 2
26VC-96279: RNCC: 6 | RNVC: 9

28 Feb 2002

5120-99-750-0328
Guide

997500328
EA6205G570-101: RNCC: 3 | RNVC: 2

21 May 2008

5120-99-251-3945
Spanner Wrench

992513945
521977-80: RNCC: 3 | RNVC: 2
521977: RNCC: 5 | RNVC: 1
71889: RNCC: 5 | RNVC: 1
D0006-95/1: RNCC: 6 | RNVC: 9
SR1575/1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-156-3747
Rivet Tool

991563747
EA3205G028-133: RNCC: 3 | RNVC: 2

23 Jul 1998

5120-99-146-2858
Face Spanner Wrench Socket

991462858
S6170-10012: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-609-1392
Extractor

5120-99-607-9609

5120-99-617-0057

5120-99-299-9857

5120-99-459-3288
Attachment

5120-99-439-1253

5120-99-136-1014
Stop Valve Spanner

991361014
T.R.111: RNCC: 3 | RNVC: 2
B T.R.111: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-418-4874
Bearing Pusher

5120-99-418-4882

5120-99-978-0477
Torque Wrench

999780477
100`P'11139: RNCC: 3 | RNVC: 2
100`P': RNCC: 6 | RNVC: 9
11139: RNCC: 6 | RNVC: 9
SL2(P): RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-370-9294
Abrasive Wheel Dresser Cutters

993709294
NO.2 HUNT CUTTER: RNCC: 3 | RNVC: 2
HU2C: RNCC: 6 | RNVC: 9

20 Aug 1992

5120-99-418-4841

5120-99-122-7607
Screw Thread Insert Inserter

991227607
528-7: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-437-7704
Spanner Wrench

994377704
FB136923-2: RNCC: 3 | RNVC: 2
FB136923-2: RNCC: 3 | RNVC: 9
T161789: RNCC: 5 | RNVC: 2
T161789: RNCC: 5 | RNVC: 9
37B836: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-436-0184

5120-99-445-4352

5120-99-204-7597
Wiper Ring

5120-99-418-4009
Flat Ti Screwdriver

5120-99-449-0259

5120-99-449-0267

5120-99-428-4562

5120-99-449-0194
Socket Wrench

5120-99-428-9681

5120-99-428-4559

5120-99-153-3447
Socket Wrench Socket

991533447
892/01285: RNCC: 3 | RNVC: 2
248429: RNCC: 6 | RNVC: 9

1 Oct 2012

5120-99-757-0184
Box Wrench

997570184
WG1388-0157-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-815-0232
Socket Head Screw Key Set

998150232
NO PRIMARY REF 99-815-0232: RNCC: 3 | RNVC: 2
199-5195: RNCC: 5 | RNVC: 2

4 May 2011

5120-99-814-8290
Tube Extension

998148290
NO PRIMARY REF 99-814-8290: RNCC: 3 | RNVC: 2
FV313283: RNCC: 5 | RNVC: 2
LV9AHYFV313283: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-3833
Rac Assembling Tool

998103833
NO PRIMARY REF 99-810-3833: RNCC: 3 | RNVC: 2
J12210: RNCC: 5 | RNVC: 2
LV1ENVJ12210: RNCC: 6 | RNVC: 9

12 Sep 1990

5120-99-700-7809
Ram Inner Base

997007809
ME.A.10076: RNCC: 3 | RNVC: 2

3 Aug 1990

5120-99-415-5705

5120-99-432-0978

5120-99-136-6361
Seat Ring Key

5120-99-136-5823

5120-99-138-5269
Withdrawal Tool

991385269
D30-18440-01: RNCC: 3 | RNVC: 2
DSSK12435: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6348
Socket Wrench Socket

999106348
BS4006 TABLE 7: RNCC: 4 | RNVC: 1
H20175: RNCC: 5 | RNVC: 2
FA17564: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4575: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-547-2458
Hand Hydraulic Jack

995472458
M10: RNCC: 3 | RNVC: 2
002-541-503: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-755-9715
Socket Wrench Crowfoot Attachment

997559715
GU.18394: RNCC: 3 | RNVC: 2
GU18394: RNCC: 5 | RNVC: 2
85-101-2496: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5424
Wood Mallet

999105424
A2/9866: RNCC: 3 | RNVC: 2
C00RDPATH1182: RNCC: 6 | RNVC: 9
FA14080: RNCC: 6 | RNVC: 9
1K141: RNCC: 6 | RNVC: 9
COORDPATH1182: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-881-4480
Open End Wrench

998814480
ET104: RNCC: 3 | RNVC: 2
7044-104: RNCC: 5 | RNVC: 2
Z7044-104: RNCC: 5 | RNVC: 2
7044-104: RNCC: 5 | RNVC: 2
CBZ7044-104: RNCC: 5 | RNVC: 2
TS3: RNCC: 5 | RNVC: 2
LV6MT12CB7044-104: RNCC: 6 | RNVC: 9
16C3394: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-1787
Brush

5120-99-458-1773
Torque Wrench

994581773
EVT600RR: RNCC: 3 | RNVC: 2
0D26977FCNK8098: RNCC: 5 | RNVC: 2
0D26977: RNCC: 5 | RNVC: 2
855038: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-727-1016
Parachute Packing Spring Compressor

997271016
ASE03570: RNCC: 3 | RNVC: 2
48402701: RNCC: 6 | RNVC: 9

10 Apr 2012

5120-99-726-0022
Socket Wrenc Socket

997260022
C306729: RNCC: 3 | RNVC: 2

10 May 1995

5120-99-150-1325
Unde Extractor Bolt

991501325
110079-8973: RNCC: 3 | RNVC: 2
110079-8973: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-749-8805
Socket Sp Extension

997498805
1702311: RNCC: 3 | RNVC: 2

22 Dec 1986

5120-99-731-8480
Socket Wrench Extension

997318480
MBEU57661: RNCC: 3 | RNVC: 2

17 Sep 2003

5120-99-731-2160
Swaging Tool

997312160
FV2077337: RNCC: 3 | RNVC: 2
AT60036: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-725-3957
Socket Wrench Crowfoot Attachment

997253957
FV2304831: RNCC: 3 | RNVC: 2
STW54027: RNCC: 5 | RNVC: 2
RJ521: RNCC: 6 | RNVC: 9

3 Feb 2009

5120-99-826-6411

5120-99-808-1166

5120-99-436-0317
Puller

994360317
910C176-1: RNCC: 3 | RNVC: 2
5UA9126: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-051-6804
Relief Valve Seat I

990516804
K19181: RNCC: 3 | RNVC: 2

2 Jul 1993

5120-99-474-5720
Tacker

994745720
KX 418 E: RNCC: 3 | RNVC: 2
KX418E: RNCC: 3 | RNVC: 2
KX 418 E: RNCC: 5 | RNVC: 2

6 Aug 2003

5120-99-829-5818

5120-99-782-2105

5120-99-789-7745

5120-99-831-5290
Spanner Wrench

998315290
HN4: RNCC: 3 | RNVC: 2

13 Mar 1992

5120-99-797-1006
Open End Wrench

997971006
22131: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-801-8753
Retaining Ring Pliers

998018753
FV530804: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-4948
Screw Thread Insert Inserter

997104948
535-7: RNCC: 3 | RNVC: 2
PE8733: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
9863-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-474-5492
Slotted Nut Spanner

994745492
17229042-0: RNCC: 3 | RNVC: 2
17229042-0: RNCC: 5 | RNVC: 2
021JB-031: RNCC: 6 | RNVC: 9

23 May 2002

5120-99-207-8865
Ratchet Handle

992078865
GMB75963-1-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-0403
Crimping To Locator

991300403
603884-1: RNCC: 3 | RNVC: 2
1H383: RNCC: 6 | RNVC: 9

31 May 1977

5120-99-406-2567
Turnlo Staking Tool

994062567
TOOLA6 1-2: RNCC: 3 | RNVC: 2
28FP464: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-471-1876
Mechanical Puller

994711876
A2.281.81: RNCC: 3 | RNVC: 2
A1014005: RNCC: 5 | RNVC: 9

7 Feb 2001

5120-99-760-6317
Locking Fixture

997606317
CP13741/1: RNCC: 3 | RNVC: 2
CP13741: RNCC: 5 | RNVC: 2
118315ST: RNCC: 6 | RNVC: 9

8 Mar 1990

5120-99-577-6337
Socket Wren Adapter

5120-99-465-3804

5120-99-136-8280
Spanner Wrench

991368280
BW4609-9: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-5905
Smiths Hammer Set

999105905
UKC1S1574-1: RNCC: 3 | RNVC: 2
1C5391: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-415-0023
Crankshaf Installer

994150023
21-159: RNCC: 3 | RNVC: 2
21-159: RNCC: 5 | RNVC: 2
982OT0018: RNCC: 6 | RNVC: 9

5 Nov 1998

5120-99-654-6921
Mechanical Puller

996546921
A0118082-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-867-8052
Hand Hydraulic Jack

998678052
14.15.3.001/1: RNCC: 3 | RNVC: 2

4 May 1995

5120-99-425-0368
Caulking Gun

994250368
543-14-100: RNCC: 3 | RNVC: 2
88712-701-353: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-539-4658
Socket Wrench

995394658
S99-1662: RNCC: 3 | RNVC: 2
99-1662: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-560-9711
Spanner Wrench

995609711
48107-17: RNCC: 3 | RNVC: 2
481071TEM17: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-471-3677
Precompression Wedg

994713677
S1006268: RNCC: 3 | RNVC: 2
730/08/13-22: RNCC: 6 | RNVC: 9

11 Oct 2005

5120-99-414-7733
Key Spanner

994147733
NO PRIMARY REF 99-414-7733: RNCC: 3 | RNVC: 2
ST1388: RNCC: 5 | RNVC: 9
27Q13837: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-453-7555
Open End Wrench

994537555
SA-000091093-301-001: RNCC: 3 | RNVC: 2
FL963DS0023: RNCC: 6 | RNVC: 9

10 Dec 1996

5120-99-276-1745
Ball Bearing Sleeve

992761745
EA6705G564-045: RNCC: 3 | RNVC: 2
1MEVGEF: RNCC: 6 | RNVC: 9

10 Apr 2004

5120-99-534-5566
Mechanical Puller

5120-99-946-0818
Electrical Inserter

999460818
NO PRIMARY REF 99-946-0818: RNCC: 3 | RNVC: 2
BKB2544-3: RNCC: 5 | RNVC: 2
2CZ138886: RNCC: 5 | RNVC: 2
K678-678306: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-632-6026
Seal Tool

5120-99-718-8374
Rocket Initi Wrench

997188374
MBEU64119: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-713-3043
Spanner Wrench

997133043
T416: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-1577
Mechanical Puller

996551577
460009261B: RNCC: 3 | RNVC: 2

5 Sep 1980

5120-99-930-7485
Rack Bar Jack

999307485
PE25851: RNCC: 3 | RNVC: 2

6 Apr 2010

5120-99-727-0012
Torque Wrench Adapter

997270012
ST76001-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-717-9901
Cable Tie Installation Tool

997179901
TY400: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-139-8922
Spanner Wrench

991398922
1052-404: RNCC: 3 | RNVC: 2
A72992: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-615-6082
Socket Wrench Adapter

996156082
MBJ29470: RNCC: 3 | RNVC: 2

16 Sep 2004

5120-99-500-3087
Pliers

995003087
BS3087: RNCC: 4 | RNVC: 1
PW2169/7: RNCC: 5 | RNVC: 2

16 Jun 2000

5120-99-497-8848
Seal Inserter

994978848
DAE5443GSE: RNCC: 3 | RNVC: 2
AE5443: RNCC: 5 | RNVC: 2
AE5443GSE: RNCC: 5 | RNVC: 2
99-617-7071: RNCC: 6 | RNVC: 9

20 May 1999

5120-99-869-4550
Inserting Tool

998694550
0661-814-4: RNCC: 3 | RNVC: 2

26 Apr 1996

5120-99-241-7005
Oil Filter Wrench

992417005
T-AK6404: RNCC: 3 | RNVC: 2
T-AK6404: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-829-0429
Bearing Rem Adaptor

998290429
NO PRIMARY REF 99-829-0429: RNCC: 3 | RNVC: 2
VR2160: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-829-2301
Damper Ring Re Tool

998292301
EB6505G501-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-826-4343
Socket Hexagon Bit

998264343
7244-251: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-338-6007
Cross Tip Screwdriver

993386007
NMT-127: RNCC: 3 | RNVC: 2

3 Dec 1998

5120-99-223-9942

5120-99-418-4820
Wrench Adapter

5120-99-192-1135
Machinist's Scriber

991921135
EME 70585-358-184: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-350-8420
Spanner Kit

993508420
GT/A104: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-799-2703
Drain Plug Wrench

997992703
013010092/18/103: RNCC: 3 | RNVC: 2
013010092/18 ITEM 103: RNCC: 5 | RNVC: 2
42.M.173.OR.0092/18 ITEM 103: RNCC: 5 | RNVC: 2
42.M.173.OR.0092/18/103: RNCC: 5 | RNVC: 2
S42.M.173.OT.0092/18 ITEM 103: RNCC: 5 | RNVC: 2
S42.M.173.OT.0092/18/103: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-790-1500
Spanner

997901500
NO PRIMARY REF 99-790-1500: RNCC: 3 | RNVC: 2
PM50580: RNCC: 5 | RNVC: 2
126TS-908: RNCC: 6 | RNVC: 9

20 Sep 2002

5120-99-710-7696
Spring Compression

997107696
NO PRIMARY REF 99-710-7696: RNCC: 3 | RNVC: 2
HWU1027-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-961-9928
Broke Removing Tool

999619928
NO PRIMARY REF 99-961-9928: RNCC: 3 | RNVC: 2
SM420: RNCC: 5 | RNVC: 2
B2SM420: RNCC: 6 | RNVC: 9

27 Nov 1980

5120-99-943-4427
Eyelet Closing Dies

999434427
NO PRIMARY REF 99-943-4427: RNCC: 3 | RNVC: 2
H5577: RNCC: 5 | RNVC: 2
2242-125: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-543-1458
Galvano Screwdriver

995431458
SM1-6-12-25-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-456-2132
Hand Hammer

994562132
W 92: RNCC: 3 | RNVC: 2
BS876: RNCC: 4 | RNVC: 1
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
F1FA14314: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-434-7140
Copper Tubin Bender

994347140
NO PRIMARY REF 99-434-7140: RNCC: 3 | RNVC: 2
F1FA10184: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-122-5029
Tap And Reamer Wrench

991225029
143: RNCC: 3 | RNVC: 2
E143: RNCC: 5 | RNVC: 2
MOD-0110: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-760-1082
Open End Wrench

997601082
T.10075-407: RNCC: 3 | RNVC: 2
T10075-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-496-1756
Spanner Wrench

994961756
AS710080: RNCC: 3 | RNVC: 2
AS710080-IL: RNCC: 5 | RNVC: 2
AS710080-DL: RNCC: 5 | RNVC: 2
DST51/459/3/3: RNCC: 6 | RNVC: 9

28 Oct 1993

5120-99-836-1784
Socket Wrench Handle Bar

998361784
48R145: RNCC: 3 | RNVC: 2
48R145: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-521-5473
Spanner Wrench

995215473
FV 397192: RNCC: 3 | RNVC: 2
J10534: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-549-3623
Socket Wrench Adapter

995493623
2S440 13942: RNCC: 3 | RNVC: 2
FG963690002: RNCC: 6 | RNVC: 9

19 Mar 1996

5120-99-809-0269
Wrench Assembly

998090269
F7: RNCC: 3 | RNVC: 2
B5: RNCC: 5 | RNVC: 2
F0007001: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-803-0324

5120-99-826-8847

5120-99-826-8848

5120-99-443-1267
Valve Fitting Tool

994431267
YN74919: RNCC: 3 | RNVC: 2

14 Jun 2000

5120-99-803-0239

5120-99-794-0173
Torque Wrench Adapter

997940173
012030: RNCC: 3 | RNVC: 2
0234911S00: RNCC: 5 | RNVC: 2
2611 135 01402: RNCC: 5 | RNVC: 2
91730020: RNCC: 5 | RNVC: 2
91730020: RNCC: 5 | RNVC: 2
H24624: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-932-7108
Open End Wrench

999327108
2JM2430: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-99-889-0414
Extractor Lever

998890414
A1041001-D: RNCC: 3 | RNVC: 2

26 Apr 2001

5120-99-764-0723
Electronic Equipment Alignment Tool

997640723
8 T000: RNCC: 3 | RNVC: 2
H23002: RNCC: 5 | RNVC: 2
208558: RNCC: 5 | RNVC: 2
8149: RNCC: 5 | RNVC: 2
UW214A3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-253-5934
Drawing Boa Bracket

992535934
601526: RNCC: 3 | RNVC: 2
261526: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-0454
Tang Break Of Punch

991240454
3580-04: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-547-5392
Installing And Remo

995475392
91066-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-411-9040
Sleeve

994119040
NO PRIMARY REF 99-411-9040: RNCC: 3 | RNVC: 2
ST2024: RNCC: 5 | RNVC: 9
27Q13482: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-422-5600
Withdraw Lever Tool

994225600
NO PRIMARY REF 99-422-5600: RNCC: 3 | RNVC: 2
N0D2175-216A: RNCC: 5 | RNVC: 2
119065: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-517-5946
Socket Wrench Socket

995175946
NO PRIMARY REF 99-517-5946: RNCC: 3 | RNVC: 2
KEN-582-6980K: RNCC: 5 | RNVC: 2
KEN-582-6980K: RNCC: 6 | RNVC: 9

5 Sep 2011

5120-99-147-6446
Combination Open End And Spanner Wrench

991476446
825/99842: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-255-4116
Screwdriver Torque

992554116
AMCOTS8-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-5462
Socket Wrench Socket

991225462
KSW401: RNCC: 3 | RNVC: 2
T2BJ529: RNCC: 5 | RNVC: 2
1700073: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-535-6387
Electronic Component Inserter And Remover

995356387
805H-CP: RNCC: 3 | RNVC: 2
805H-CP: RNCC: 5 | RNVC: 2

13 Dec 1995

5120-99-657-2511
Mechanical Puller

996572511
460009318C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-723-6412
Releas Blanking Cap

997236412
SX9742: RNCC: 3 | RNVC: 2
012UE0022: RNCC: 6 | RNVC: 9

31 Oct 2001

5120-99-910-7935
Staking And Punchin

999107935
H4596: RNCC: 2 | RNVC: 2
1J11: RNCC: 6 | RNVC: 9
FA19429: RNCC: 6 | RNVC: 9
H4596: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-820-7364

5120-99-826-8745

5120-99-715-9913
Wrench Spanner

997159913
ST40899: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-558-8375
Open End Box Wrench

995588375
BF29065: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-454-2619
Valve Spring Compressor

994542619
FHQ153: RNCC: 3 | RNVC: 2
27KF684: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-3658
Bumber Clearance Fi

991363658
NO PRIMARY REF 99-136-3658: RNCC: 3 | RNVC: 2
12YJ70330C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-967-1983
Spanner Wrench

999671983
SM1072: RNCC: 3 | RNVC: 2
DDE34439/518: RNCC: 5 | RNVC: 2
10299: RNCC: 6 | RNVC: 9
ST1166: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-938-8003
Socket Wrench Attachment Universal Joint

999388003
NMT-155: RNCC: 3 | RNVC: 2

4 Dec 1998

5120-99-964-8562
Inserting Tool

999648562
PA577-224: RNCC: 3 | RNVC: 2
362409: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-374-7373
Socket Head Screw Key

993747373
01523/DT/008545: RNCC: 3 | RNVC: 2

24 Apr 1997

5120-99-422-4657
Socket Wrench Handle Bar

994224657
N38432-10: RNCC: 3 | RNVC: 2
U277785: RNCC: 5 | RNVC: 2
88604-606-086: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-2181
Mechanical Puller

996592181
460009318D: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-721-7937
Bearing And Bushing Remover

997217937
CBD10342G01: RNCC: 3 | RNVC: 2

6 Apr 2001

5120-99-256-4122
Longnose Pliers

992564122
185-20CPY: RNCC: 3 | RNVC: 2
H24202: RNCC: 5 | RNVC: 2

10 Mar 1993

5120-99-628-6176
Support

996286176
26835083: RNCC: 3 | RNVC: 2

12 Aug 1999

5120-99-769-8969
Socket Hexagon Plug

997698969
2USB250: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-0401
Wire Threading Tool

991240401
CT1: RNCC: 3 | RNVC: 2
1H215: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-825-4424

5120-99-819-8356

5120-99-828-5214
Fixed Head Drive

5120-99-847-6786
Spanner Wheel Nut S

998476786
152519: RNCC: 3 | RNVC: 2
LV7TY152519: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-802-5861
Compressor Assembly

998025861
FV590012: RNCC: 3 | RNVC: 2
T603: RNCC: 3 | RNVC: 2
RS418: RNCC: 3 | RNVC: 2

11 Dec 1980

5120-99-465-6102
Screwdriver

994656102
1C9381: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-99-910-6518

5120-99-867-5036

5120-99-977-7646
Ratchet Wrench Asse

999777646
MTA4004-1: RNCC: 3 | RNVC: 2
MTA4004-1: RNCC: 3 | RNVC: 2
1C8599: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-830-9520
T Adjustable Puller

5120-99-655-1546
Mechanical Puller

996551546
460009070B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-735-7968
Open End Wrench

997357968
OPW 211: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-361-7021
Flat Tip Screwdriver

993617021
621-304: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-811-8727
Spanner Socket

998118727
NO PRIMARY REF 99-811-8727: RNCC: 3 | RNVC: 2
6WLP: RNCC: 5 | RNVC: 2
51061: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-402-1536
Swivel Socket

994021536
NO PRIMARY REF 99-402-1536: RNCC: 3 | RNVC: 2
49: RNCC: 5 | RNVC: 2
562-157-140: RNCC: 5 | RNVC: 2
16C6683: RNCC: 6 | RNVC: 9

31 Oct 1979

5120-99-052-3720
Screwdriver

990523720
P085-0005-00: RNCC: 3 | RNVC: 2

4 Feb 1992

5120-99-613-1449
Rudder Be Extractor

996131449
121E93-898-00-00: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-214-4088
Axle Locking Plate

992144088
1-30-0013: RNCC: 3 | RNVC: 2
400-9030: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-513-6535
Open End Box Wrench

995136535
21-041: RNCC: 3 | RNVC: 2

28 May 1993

5120-99-584-6310
Clamping Tool

995846310
B50214-1: RNCC: 3 | RNVC: 2
B50214: RNCC: 5 | RNVC: 2
B50214: RNCC: 5 | RNVC: 2
B50214-1: RNCC: 5 | RNVC: 2
WD 3850-003: RNCC: 5 | RNVC: 2
WE128B1: RNCC: 6 | RNVC: 9

1 Apr 1999

5120-99-826-4195
Spanner Ring Specia

998264195
NO PRIMARY REF 99-826-4195: RNCC: 3 | RNVC: 2
109904ST: RNCC: 5 | RNVC: 2

30 Jul 1980

5120-99-950-2774
Tube Bending Spring

999502774
BS-8: RNCC: 3 | RNVC: 2
75027: RNCC: 5 | RNVC: 2

20 Jun 1994

5120-99-876-2162
Weight

998762162
TX1072: RNCC: 3 | RNVC: 2

7 Feb 2004

5120-99-881-2244
Handle

998812244
FV335350: RNCC: 3 | RNVC: 2
LV6MT13FV335350: RNCC: 6 | RNVC: 9

11 May 1988

5120-99-730-6350
Socket Wrench Crowfoot Attachment

997306350
SCO40: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-265-1242
Centra Removal Tool

992651242
MC1277190: RNCC: 3 | RNVC: 2

10 Oct 2002

5120-99-147-6581
Alignment Pin

991476581
J84733: RNCC: 3 | RNVC: 2
032630021: RNCC: 6 | RNVC: 9

20 Jun 2003

5120-99-417-4526
Drill Guide

994174526
D 0.1998: RNCC: 3 | RNVC: 2
D.1998: RNCC: 5 | RNVC: 2
3AP5190: RNCC: 6 | RNVC: 9

10 Aug 1993

5120-99-490-8018
Gauge

994908018
MRPT3138 (CAV B): RNCC: 3 | RNVC: 2

23 Jan 2008

5120-99-828-4440
Piston Rod Support

998284440
FV836972: RNCC: 3 | RNVC: 2

24 Aug 1977

5120-99-834-2531
Hub Nut Spanner

998342531
E698: RNCC: 3 | RNVC: 2

1 Jun 2005

5120-99-828-5140
Circlip Jaw Points

998285140
18G257P: RNCC: 3 | RNVC: 2
18G257P1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-813-0687
Screwdriver Bit

998130687
029780: RNCC: 3 | RNVC: 2
FP184: RNCC: 6 | RNVC: 9

27 Oct 2009

5120-99-815-7804
Spanner Wrench

998157804
FV 51451: RNCC: 3 | RNVC: 2
LV9ASCFV51451: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-662-1720
Adapter

996621720
GM3043: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-0348
Mechanical Puller

996550348
460009240C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-168-9908
Socket Wrenc Socket

991689908
C.2113: RNCC: 3 | RNVC: 2

24 Apr 1996

5120-99-244-4716
Alignment Segment

992444716
119999ST: RNCC: 3 | RNVC: 2
A.P.62240: RNCC: 5 | RNVC: 2
ST119999: RNCC: 5 | RNVC: 2

15 Aug 1991

5120-99-666-8120
Torque Screwdriver

996668120
015200: RNCC: 3 | RNVC: 1
MINOR FH BLUE: RNCC: 5 | RNVC: 1

7 Feb 2007

5120-99-548-0592
Piston R Compressor

5120-99-843-8068
Special Too Insert

998438068
17239005-0: RNCC: 3 | RNVC: 2
17239005-0: RNCC: 5 | RNVC: 2
021JB-044: RNCC: 6 | RNVC: 9

23 May 2002

5120-99-534-3759
Ratchet Wrench

995343759
3: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-667-0613
Mechani Puller Body

996670613
EA6505G533-101: RNCC: 3 | RNVC: 2

22 May 2008

5120-99-724-4437
Adaptor Replacer

997244437
LRT-12-008: RNCC: 3 | RNVC: 2
18G.134-11: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-429-4686
Pistol Ring Spanner

994294686
NO PRIMARY REF 99-429-4686: RNCC: 3 | RNVC: 2
MDSK1340-9: RNCC: 5 | RNVC: 2
624452: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-812-4023

5120-99-612-6998
Clamp

996126998
TURNEX TCA002: RNCC: 3 | RNVC: 2
NPPOGAMA4B2060405: RNCC: 6 | RNVC: 9

5 Jul 2005

5120-99-753-9762
Valve Pin Installer

997539762
J24458: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-735-7959
Open End Wrench

997357959
OPM 430: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-754-9258
Mechanical Puller

997549258
S3S17742000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-732-0561
Dowe Insertion Tool

997320561
FV2077325: RNCC: 3 | RNVC: 2
AT60024: RNCC: 5 | RNVC: 2

12 May 1986

5120-99-731-2168
Dowe Insertion Tool

997312168
FV2077387: RNCC: 3 | RNVC: 2
AT60090: RNCC: 5 | RNVC: 2

9 May 1986

5120-99-759-2615
Torque Wrench

997592615
2021T403: RNCC: 3 | RNVC: 2
2286T000: RNCC: 5 | RNVC: 2
2021T409: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-753-9727
Bearing Installer

997539727
J23549: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-806-4274
Indicator C Spanner

998064274
PC24205: RNCC: 3 | RNVC: 2
PC24205: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-831-8211
C Clamp

998318211
115085: RNCC: 3 | RNVC: 2

24 Apr 1995

5120-99-564-2637
Drill Guide

995642637
D 0.4688: RNCC: 3 | RNVC: 2
D.4688: RNCC: 5 | RNVC: 2
3AP5197: RNCC: 6 | RNVC: 9

6 Aug 1993

5120-99-854-4185
Flat Tip Screwdriver

998544185
BS2559-PART 1 128X3.15: RNCC: 3 | RNVC: 2

8 Jun 2005

5120-99-813-3296
R Installation Tool

998133296
99360553: RNCC: 3 | RNVC: 2
CV177193: RNCC: 5 | RNVC: 2

16 Sep 2010

5120-99-829-4087
Mechanical J Handle

998294087
12625-6: RNCC: 3 | RNVC: 2
KAM1422: RNCC: 5 | RNVC: 2
0621742: RNCC: 6 | RNVC: 9
68VB17A005AA: RNCC: 6 | RNVC: 9
68VB17A005BA: RNCC: 6 | RNVC: 9
0621741: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-799-5950
Mechanical Puller

997995950
200886252.AFT.2: RNCC: 3 | RNVC: 2
200886252.AFT.2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-722-6715
Mechanical Puller

997226715
MS252A: RNCC: 3 | RNVC: 2
MS.252A: RNCC: 5 | RNVC: 2

29 Jul 1988

5120-99-740-1025
Torque Wrench

997401025
12012: RNCC: 3 | RNVC: 2

19 Feb 2002

5120-99-722-9957
Drive Pin Punch

997229957
FV 2020352: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-99-834-8365

5120-99-834-6406
Slide Hamme Adaptor

5120-99-834-8364

5120-99-138-2571
Grommet Inserting Punch And Die

991382571
2: RNCC: 3 | RNVC: 2
595C0001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-144-6012
Assembly O R Sleeve

991446012
460002098: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-9535
Screw Thread Insert Inserter

991229535
A29-1: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
1C7561: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-718-7522
Socket Wrench Socket

997187522
100401-1732-ASY: RNCC: 3 | RNVC: 2
M78044: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-718-8440
Socket Wrench Attachment Universal Joint

997188440
1700045: RNCC: 1 | RNVC: 2
KMU8: RNCC: 3 | RNVC: 2
407S: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-735-0089
Open End Wrench

997350089
827 436M1: RNCC: 3 | RNVC: 2
886 127 M91-ITEM: RNCC: 5 | RNVC: 2
3-1896-006-A-8: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-301-2617
Seal Inserter

993012617
4A41-W8-133: RNCC: 3 | RNVC: 2
4A41W8-133: RNCC: 5 | RNVC: 2
A090S4000000320 ITEM 3B: RNCC: 5 | RNVC: 2
A090S4000000320/3B: RNCC: 5 | RNVC: 2

3 Feb 1995

5120-99-130-0418
Crimping To Locater

991300418
604627-2: RNCC: 3 | RNVC: 2
1H368: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5413
Hand Melting Ladle

999105413
NO PRIMARY REF 99-910-5413: RNCC: 3 | RNVC: 2
C00RDPATH5334: RNCC: 5 | RNVC: 2
FA14983: RNCC: 6 | RNVC: 9
1B4308: RNCC: 6 | RNVC: 9

4 Feb 1984

5120-99-910-5442
Tinmans Mandrel

999105442
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1615: RNCC: 6 | RNVC: 9
H1615: RNCC: 6 | RNVC: 9
F1FA1540: RNCC: 6 | RNVC: 9
1B2925: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-729-0964
Craftsman's Tweezers

997290964
545-171: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-531-7740
Nut Wrench

995317740
NO PRIMARY REF 99-531-7740: RNCC: 3 | RNVC: 2
365C946-4-5-6-7: RNCC: 5 | RNVC: 2
UX10246: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-719-1673
Torque Wrench

997191673
41764-301-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-869-3590
Wrench Key Set Case

998693590
5190-06-CASE: RNCC: 3 | RNVC: 2

11 Aug 1995

5120-99-461-6161
Melting Pot

994616161
MED54051: RNCC: 3 | RNVC: 2
0264-50: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-360-3992
Box Wrench

993603992
S6810501: RNCC: 3 | RNVC: 2
S7B36: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-423-1065
Adaptor Head

994231065
GMB4298: RNCC: 3 | RNVC: 2
4Q2910: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-7211
Universal Spanner 2

5120-99-609-1617
Torque Wrench Adapter

996091617
NTS10905: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-684-4231
Socket Wrench Spanner Attachment

996844231
T2AH8210: RNCC: 3 | RNVC: 2

21 Sep 2006

5120-99-454-2643
Spanner Wrench

994542643
FHQ469: RNCC: 3 | RNVC: 2
CFHQ469: RNCC: 5 | RNVC: 2
27KF2314: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-458-7723
Spanner Wrench

994587723
E39570: RNCC: 3 | RNVC: 2
E39570: RNCC: 5 | RNVC: 9
6U115: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-459-0651
Extractor Screw

994590651
HW31740: RNCC: 3 | RNVC: 2
64VV1977: RNCC: 6 | RNVC: 9

7 Nov 1979

5120-99-437-5904
Spanner Wrench

994375904
PAT13255: RNCC: 3 | RNVC: 2
0277-13255: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-734-8386
Socket Head Screw Key

997348386
Z03433 APPENDIX E: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-713-3705
Assembly Of R Drift

997133705
FPJ8469: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-195-6480
Mechanical Jack Handle

991956480
PCCA18: RNCC: 3 | RNVC: 2
510AK24: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-617-1850
Mechanical Puller

996171850
HU17727: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-521-1752
Elec Alignment Tool

995211752
A532369: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-805-8647

5120-99-122-2570
Blind Riveter Head

991222570
AML9004: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-120-5817
Open End Wrench

991205817
BS192: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-434-7193

5120-99-829-5542
Preload Sleeve

998295542
15-023: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-254-4359
Flexible Extension

992544359
7162-2400: RNCC: 3 | RNVC: 2
1C-8723: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-568-6074
Screwdriver Bit Set

995686074
NO PRIMARY REF 99-568-6074: RNCC: 3 | RNVC: 2
88JL6: RNCC: 5 | RNVC: 2
ANIC-BE-8330049: RNCC: 6 | RNVC: 9

8 Aug 2006

5120-99-242-8826
Sealant Dispenser

992428826
DM 400-04: RNCC: 3 | RNVC: 2
DRDY01831: RNCC: 6 | RNVC: 9

27 Sep 2001

5120-99-319-5069
Torque Wrench

993195069
EA2205G010-002: RNCC: 3 | RNVC: 2

4 Jun 2008

5120-99-809-7600
Box Wrench

998097600
369-339: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-037-0562
Retainer Layshaft G

990370562
LRT-37-023: RNCC: 3 | RNVC: 2
FH964410005: RNCC: 6 | RNVC: 9

17 Apr 1996

5120-99-910-4405
C Cramp

999104405
DL9A-H490: RNCC: 2 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 2
1A491: RNCC: 6 | RNVC: 9
H490: RNCC: 6 | RNVC: 9
F1FA11474: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-7481
Box Wrench

991357481
DEF STAN 51-11 PART 2: RNCC: 4 | RNVC: 1
BS3555-TABLE 1 5X5.5MM: RNCC: 4 | RNVC: 1
41010555: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT2: RNCC: 6 | RNVC: 9
H6715: RNCC: 6 | RNVC: 9
TABLE I (A) ITEM 1 5X5.5MM: RNCC: 6 | RNVC: 9
175X5-50: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6433
Sheet Metalworking Stake

999106433
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H2559: RNCC: 6 | RNVC: 9
FA17700: RNCC: 6 | RNVC: 9
H2559: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2559: RNCC: 6 | RNVC: 9
1C2314: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-466-9182
Open End Wrench

994669182
0FA428: RNCC: 3 | RNVC: 2
A3994: RNCC: 5 | RNVC: 2
1C7921: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-1856
Socket Wrench Socket

991391856
TMMD6: RNCC: 3 | RNVC: 2
TMMD6: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-766-4924
Seal Guide

997664924
CH138631: RNCC: 3 | RNVC: 2
10ZZ206311: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-127-6115
Box Wrench

991276115
DDA216: RNCC: 3 | RNVC: 2
2RB5056: RNCC: 3 | RNVC: 2
0D10738: RNCC: 5 | RNVC: 2
H21898: RNCC: 5 | RNVC: 2
X01618: RNCC: 6 | RNVC: 9
544387: RNCC: 6 | RNVC: 9
BS3555: RNCC: 6 | RNVC: 9
2RB5056: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-142-9167

5120-99-714-8894
Torque Wrench Adapter

997148894
MBEU1730RU: RNCC: 3 | RNVC: 2
CMBEU1730RU: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-660-1966
Locator Spares Kit

996601966
1-525326-0: RNCC: 3 | RNVC: 2

17 Dec 1991

5120-99-120-2743
Open End Box Wrench

991202743
DL-9-A: RNCC: 4 | RNVC: 1
H5802: RNCC: 6 | RNVC: 9
1C6473: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-162-9638
Socket Wrench Socket

991629638
18300A 1-1/2: RNCC: 3 | RNVC: 2

25 Jul 2006

5120-99-300-1325
Bea Insertion Tool

993001325
708086: RNCC: 3 | RNVC: 2
709109 ITEM 4: RNCC: 5 | RNVC: 2
709109/4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-717-1446
Mechanical Puller

997171446
PE50324: RNCC: 3 | RNVC: 2
T.86720: RNCC: 5 | RNVC: 2
64DE307: RNCC: 6 | RNVC: 9
64DE/307: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-667-2885
Stud Nut Drift

996672885
JL/A3-54906: RNCC: 3 | RNVC: 2
090ZL-008: RNCC: 6 | RNVC: 9

5 Mar 2009

5120-99-422-5676
Loader Lifting Tool

994225676
N0D2175-280: RNCC: 3 | RNVC: 2
12168411: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-591-1925
Flat Tip And Cross Tip Screwdriver Set

995911925
NO PRIMARY REF 99-591-1925: RNCC: 3 | RNVC: 2
537-849: RNCC: 5 | RNVC: 2

20 Aug 2001

5120-99-145-0052
Mechanical Puller

991450052
A0110369: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-406-7435
Torque Handle

994067435
TBN2 (011100): RNCC: 3 | RNVC: 2
XP98PE01323: RNCC: 6 | RNVC: 9

12 May 1998

5120-99-137-6872
Socket Wrench Socket

991376872
PES525: RNCC: 3 | RNVC: 2
PES525: RNCC: 5 | RNVC: 2
1L604: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-5717
Retaining Ri Points

991205717
N: RNCC: 3 | RNVC: 2
7065M-N: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-701-0731
Inte Insertion Tool

997010731
80404-02-4 ITEM 8: RNCC: 3 | RNVC: 2
39-9935: RNCC: 5 | RNVC: 2
103-950: RNCC: 5 | RNVC: 2

21 May 1991

5120-99-580-5386
Screw Thread Insert Inserter

995805386
U1P2: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
1C7568: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-225-6846
Socket Wrench Socket

992256846
SM19 LOCK-ON: RNCC: 3 | RNVC: 2
SM19 LOCK-ON: RNCC: 5 | RNVC: 2

25 Mar 1998

5120-99-463-6035
Tool Assembly

994636035
2071-30217: RNCC: 3 | RNVC: 2
2071-30217-04-1: RNCC: 5 | RNVC: 2
232873: RNCC: 5 | RNVC: 2

16 Nov 1995

5120-99-782-8169
Engine Block Puller

997828169
5025-161-01: RNCC: 3 | RNVC: 2
5025-161-01: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-798-1123
Special Socket

997981123
CHA748-1388: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-810-2009
Socket Spanner

998102009
NO PRIMARY REF 99-810-2009: RNCC: 3 | RNVC: 2
LV1BRC1924: RNCC: 5 | RNVC: 2

19 Aug 1980

5120-99-139-4773
Socket Wrench Socket

991394773
C072570-066-25: RNCC: 3 | RNVC: 2
HB18751: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-910-6399
Socket Wrench Socket

999106399
DEF STAN 51-11 PART 4: RNCC: 4 | RNVC: 1
BS4006-TABLE 22 3/4WHIT: RNCC: 4 | RNVC: 1
H20855: RNCC: 5 | RNVC: 2
FA17520: RNCC: 6 | RNVC: 9
1L66: RNCC: 6 | RNVC: 9
TABLE I(E) 3/4WHIT: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9
MOL V506.7001.1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-836-0505
Retaining Ri Pliers

998360505
NO PRIMARY REF 99-836-0505: RNCC: 3 | RNVC: 2
351-79: RNCC: 5 | RNVC: 9
LV7FW351-79: RNCC: 6 | RNVC: 9

18 Oct 1984

5120-99-747-5862
Mechanical Puller

997475862
48421-A14-403: RNCC: 3 | RNVC: 2
48421A14-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-979-0295
Con Extraction Tool

5120-99-722-5052
Socket Wrench Socket

997225052
VT18209: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-999-3803

5120-99-253-5528
Box Spanner

992535528
37579: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-654-4077
Mechanical Puller

996544077
460009172B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-432-0626

5120-99-627-7363

5120-99-836-2906
Box Spanner

5120-99-836-0546
Drain Plug Wrench

5120-99-993-8613
Cross Tip Screwdriver

999938613
IT/PH2/4: RNCC: 3 | RNVC: 2

19 Nov 1990

5120-99-226-6457
Mechanical Puller Attachment

992266457
HU24178: RNCC: 3 | RNVC: 2

3 Oct 2003

5120-99-439-5010
Extractor Tool

994395010
27 608 0450: RNCC: 3 | RNVC: 2
60 608 0700: RNCC: 5 | RNVC: 2

16 Jul 1998

5120-99-718-7865
Socket Wrench Adapter

997187865
1700040: RNCC: 1 | RNVC: 2
KFA1: RNCC: 3 | RNVC: 2
431S: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-547-0674
Extractor Tool

995470674
R5173610100: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-611-8356
Box Wrench

996118356
FB168746: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-4654
B Riveter Nosepiece

5120-99-252-7433
Injector Sle Wrench

992527433
GA5164A: RNCC: 3 | RNVC: 2
GA5164: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-716-7341
Box Wrench

997167341
XDH1012A: RNCC: 3 | RNVC: 2
XDH1012A: RNCC: 5 | RNVC: 2
T2AH8240: RNCC: 5 | RNVC: 2
XDH1012A: RNCC: 6 | RNVC: 9
XDH1012B: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-1513
Lever

998101513
RRPR-3W507084: RNCC: 3 | RNVC: 2
020TF-011: RNCC: 6 | RNVC: 9

12 Mar 2002

5120-99-522-1155
Termi Wrapping Tool

995221155
NO PRIMARY REF 99-522-1155: RNCC: 3 | RNVC: 2
3924-07142: RNCC: 5 | RNVC: 2
954-9429: RNCC: 5 | RNVC: 2
MWH2: RNCC: 5 | RNVC: 2
3A4370: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-513-5308
Con Extraction Tool

995135308
05-2230-12: RNCC: 3 | RNVC: 2

19 Nov 1991

5120-99-777-3235
Spanner Wrench

997773235
C078503/907: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-612-7954
Tool

996127954
121E-93-787-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-538-5939
Lan Extracting Tool

995385939
NO PRIMARY REF 99-538-5939: RNCC: 3 | RNVC: 2
Z2338BEXT11: RNCC: 5 | RNVC: 2
Z2338B11: RNCC: 5 | RNVC: 2

4 Jul 1977

5120-99-494-4816
Connector

994944816
NO PRIMARY REF 99-494-4816: RNCC: 3 | RNVC: 2
90167: RNCC: 5 | RNVC: 2
CV177130: RNCC: 5 | RNVC: 2

31 Mar 2011

5120-99-411-9081
Assembly Post

994119081
NO PRIMARY REF 99-411-9081: RNCC: 3 | RNVC: 2
ST1995: RNCC: 5 | RNVC: 9
27Q13902: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-549-6806
Jackscrew Assembly

995496806
EA6305G638-051: RNCC: 3 | RNVC: 2

16 Apr 2004

5120-99-392-7841
Ratchet Spanner

993927841
NO PRIMARY REF 99-392-7841: RNCC: 3 | RNVC: 2
031T: RNCC: 5 | RNVC: 2
W20UR000748: RNCC: 6 | RNVC: 9
111-927841: RNCC: 6 | RNVC: 9

24 Aug 1977

5120-99-812-4001
Cy Withdrawing Tool

998124001
NO PRIMARY REF 99-812-4001: RNCC: 3 | RNVC: 2
HB27505: RNCC: 5 | RNVC: 2
LV3RRHB27505: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-461-9103
Gluepot

994619103
NO PRIMARY REF 99-461-9103: RNCC: 3 | RNVC: 2
ADGK1: RNCC: 5 | RNVC: 2
0566-6022: RNCC: 6 | RNVC: 9
99-261-9102: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-384-0901
Socket Head Screw Key

993840901
KEN-602-4120K: RNCC: 3 | RNVC: 2
CV169874: RNCC: 5 | RNVC: 2

22 Jun 2011

5120-99-257-5741
Socket Wrench Socket

992575741
BUGGSIE 452: RNCC: 3 | RNVC: 2
452: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-151-8907
Torque Wrench Set

991518907
Q1873.00: RNCC: 3 | RNVC: 2

1 Dec 2010

5120-99-131-9270
Drive Pin Punch

991319270
NO PRIMARY REF 99-131-9270: RNCC: 3 | RNVC: 2
19679: RNCC: 5 | RNVC: 2

9 Jun 2004

5120-99-718-9863
Crimp Die Tool

997189863
WG1388-0140-115: RNCC: 3 | RNVC: 2

6 Oct 1981

5120-99-423-4578
Twickclip Plier

994234578
NO PRIMARY REF 99-423-4578: RNCC: 3 | RNVC: 2
SK2600: RNCC: 5 | RNVC: 2
557467: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-321-6355
Socket Wrench Screwdriver Attachment

993216355
23070045: RNCC: 3 | RNVC: 9

14 Nov 2011

5120-99-535-7560
Valve Guide Fi Tool

995357560
OD60020: RNCC: 3 | RNVC: 2

1 Jul 1997

5120-99-643-9122

5120-99-634-1740
Spanner

5120-99-147-1763
Assembly Tool

5120-99-588-1519
Hand Hammer

995881519
BS876: RNCC: 4 | RNVC: 1

29 Jul 1991

5120-99-668-2573
Seal Remover

996682573
308-652: RNCC: 3 | RNVC: 2
308-652: RNCC: 5 | RNVC: 2

13 Dec 2011

5120-99-213-4122
Terminal Crimping Tool Contact Positioner

992134122
K155: RNCC: 3 | RNVC: 2
105-838: RNCC: 5 | RNVC: 2

13 Jan 2010

5120-99-826-9968
Dolly: Press

998269968
FV1051763: RNCC: 3 | RNVC: 2
FT5603: RNCC: 5 | RNVC: 2

28 Jan 1983

5120-99-808-2433
Socket Wrench

998082433
FV667254: RNCC: 3 | RNVC: 2
513404: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-808-2429
Socket Wrench

998082429
FV679758: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-808-1099
Piston R Compressor

5120-99-466-5483
Electrical Contact Remover

994665483
CET-20-15: RNCC: 3 | RNVC: 2
274-5016-002: RNCC: 5 | RNVC: 2
1H461: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-502-2500
Bearing And Bushing Inserter

995022500
ZJEF005555TRY-ITEM-481: RNCC: 3 | RNVC: 2

3 Apr 2002

5120-99-459-1615
Hand Scissors Jack

994591615
1C1A-17080-AC: RNCC: 3 | RNVC: 2

23 Dec 2010

5120-99-397-4569
Wrench Kit

993974569
100405-0503-ASY: RNCC: 3 | RNVC: 2
SK 79039: RNCC: 5 | RNVC: 2

12 Jul 2007

5120-99-133-7197
Torque Wrench Adapter

991337197
P5J 1524740: RNCC: 3 | RNVC: 2
0625P-237: RNCC: 6 | RNVC: 9
062CE-108: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-130-2315
Mechanical Puller

991302315
DT155: RNCC: 3 | RNVC: 2
390-045039: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-726-5615
Machinist's Scriber

997265615
NO PRIMARY REF 99-726-5615: RNCC: 3 | RNVC: 2
851062: RNCC: 5 | RNVC: 2
851062: RNCC: 6 | RNVC: 9

1 Jun 2011

5120-99-571-8382
Rotating Members Aligning Tool

995718382
NG6205-003-043: RNCC: 3 | RNVC: 2

25 Jan 2012

5120-99-733-2731
Flare Nut Spanner

997332731
819071-2: RNCC: 3 | RNVC: 2
MBEU56376: RNCC: 5 | RNVC: 1
MBEU-56376: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-416-8134
Seal Fitting Tool

994168134
TOOL-000.004: RNCC: 3 | RNVC: 2
TOOL-000.004: RNCC: 5 | RNVC: 2
A11668/1: RNCC: 5 | RNVC: 2
FH982SR0009: RNCC: 6 | RNVC: 9

26 Nov 1998

5120-99-198-7971
Box Wrench

991987971
AB/5/8/5008: RNCC: 3 | RNVC: 2
CM9832: RNCC: 5 | RNVC: 2

6 Apr 1993

5120-99-448-8652
Peg Spanner

994488652
NO PRIMARY REF 99-448-8652: RNCC: 3 | RNVC: 2
1000-805: RNCC: 5 | RNVC: 2
88740-705-435: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-517-3304
Torque Spanner And

995173304
TL 5321: RNCC: 3 | RNVC: 2

6 Nov 1996

5120-99-461-0331

5120-99-460-9735

5120-99-789-4312
Spanner Wrench

5120-99-144-6140

5120-99-559-2732

5120-99-533-9980
Socket Wrench

5120-99-104-2891

5120-99-105-0069
Box Wrench

5120-99-659-7519
Box Wrench

996597519
460009069B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-558-6078
Sizing Sleeve

995586078
T590: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-654-4241
Torque Wrench Adapter

996544241
460009164C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-878-8035
Seal Bullet

998788035
SB1P440A0002: RNCC: 3 | RNVC: 2

16 Jul 1999

5120-99-122-5110
Socket Wrench Adapter

991225110
EX370-2: RNCC: 3 | RNVC: 2
EX370-2: RNCC: 5 | RNVC: 2
EX-370-2: RNCC: 6 | RNVC: 9
1C8096: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-517-1405
Mechanical Puller

995171405
S3S18122000: RNCC: 3 | RNVC: 2

16 Dec 1991

5120-99-383-2646

5120-99-127-6141
Socket Wrench

991276141
11-6266-18: RNCC: 3 | RNVC: 2
H21219: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-131-3050
Spanner Wrench

991313050
110079-15829: RNCC: 3 | RNVC: 2
26VC-96085: RNCC: 6 | RNVC: 9

25 Feb 2002

5120-99-256-6195
Boiler Tube Wire Brush

992566195
292-000: RNCC: 3 | RNVC: 2
A1070101: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-799-9476
Face Spanner Wrench Socket

997999476
209-056763: RNCC: 3 | RNVC: 2

31 Mar 2009

5120-99-422-2602
Sel Holding Fixture

994222602
NO PRIMARY REF 99-422-2602: RNCC: 3 | RNVC: 2
MT1387: RNCC: 5 | RNVC: 9
27Q34794: RNCC: 6 | RNVC: 9

15 Aug 1972

5120-99-659-6132
Face Spanner Wrench Socket

996596132
48417A16-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-539-4647
Open End Wrench

995394647
S99-2460: RNCC: 3 | RNVC: 2
99-2460: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5647
Grommet Inserting Punch And Die

999105647
C00RDPATH2015: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
F1FA15946: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2015: RNCC: 6 | RNVC: 9
H2015: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-614-8935
Drive Pin Punch

996148935
HST120-109: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-1008
Cont Insertion Tool

991241008
NO PRIMARY REF 99-124-1008: RNCC: 3 | RNVC: 2
ANR6: RNCC: 5 | RNVC: 2
414052: RNCC: 5 | RNVC: 2
1H372: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-153-1830
Temperat Reset Tool

991531830
236/A3129/001: RNCC: 3 | RNVC: 2

6 Apr 2002

5120-99-120-8395
Socket Wrench Socket

991208395
BS4006-TABLE 7 0BA: RNCC: 4 | RNVC: 1
DH413 LOCK-ON: RNCC: 5 | RNVC: 2
H21391: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
TABLE I(F) 0BA: RNCC: 6 | RNVC: 9
851638: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6277: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-372-3092
Piston Ring Compressor

993723092
91-846-256-01: RNCC: 3 | RNVC: 2
020150 R1 DL00023: RNCC: 5 | RNVC: 2

4 Sep 2009

5120-99-779-1692
Universal Hand Tool

997791692
UT910596A-A30: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-633-1667
Socket Insert Eject

996331667
558-1-00776: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-664-9427
C Clamp

996649427
FV 3024778: RNCC: 3 | RNVC: 2
BR90-48-48-71-0112: RNCC: 5 | RNVC: 2
FV 3024778: RNCC: 5 | RNVC: 2

30 Aug 1995

5120-99-146-2877
Wrench Spanner

991462877
S6170-10105-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-774-9149
Mechanical Puller

997749149
460006000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-768-3227
Tweezers

997683227
SM105SA: RNCC: 3 | RNVC: 2

21 Dec 1994

5120-99-958-0631
Socket Wrench Crowfoot Attachment

999580631
02210022: RNCC: 3 | RNVC: 2

4 May 2005

5120-99-627-7672

5120-99-108-2793
Spanner Wrench

5120-99-944-8678

5120-99-469-2746

5120-99-469-2181
Open End Wrench

5120-99-713-9200

5120-99-627-7219
Ball Driver

Load More Results