What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 60 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 60 of 108

5120-99-725-6342
Pressure Test Kit

997256342
992/08900: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-781-4601
Va Extractor Collet

997814601
2877-A8: RNCC: 3 | RNVC: 2
H2877A8: RNCC: 5 | RNVC: 2
85-690-1576: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-425-6206
Pliers Assembly

994256206
NO PRIMARY REF 99-425-6206: RNCC: 3 | RNVC: 2
88510-500-772: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-257-1138
Socket Head Screw Key

992571138
3073-9000-147: RNCC: 3 | RNVC: 2
A76090: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-112-9366
Combination Box And Open End Wrench

991129366
S7-44-269XAA: RNCC: 3 | RNVC: 2
861877: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-8969
Tubular Key Spanner

994118969
NO PRIMARY REF 99-411-8969: RNCC: 3 | RNVC: 2
ST1965: RNCC: 5 | RNVC: 9
27Q13578: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-715-0950
Retaining Ring Pliers

997150950
HC659: RNCC: 3 | RNVC: 2
85-101-2510: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-664-0141
Spanner Wrench

996640141
GE1012-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-788-7115
Oil Seal Re Adaptor

997887115
15-048-01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-715-0745
Wrench Spanner

997150745
CHA107612: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-676-4560
Socket Wrench

996764560
T4734M 030: RNCC: 3 | RNVC: 2
4734M: RNCC: 5 | RNVC: 1
281-645: RNCC: 5 | RNVC: 2
EU253.100.000: RNCC: 6 | RNVC: 9

10 Sep 2002

5120-99-138-5129
Swaging Too Die Set

991385129
NO PRIMARY REF 99-138-5129: RNCC: 3 | RNVC: 2
3002202: RNCC: 5 | RNVC: 2
PHS31: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-701-8919
Hand Screw Jack

997018919
A2 508154: RNCC: 3 | RNVC: 2
508154: RNCC: 5 | RNVC: 2
A2 508154-1: RNCC: 5 | RNVC: 2
508154-1: RNCC: 5 | RNVC: 2

24 Jan 1995

5120-99-910-4423
Parallel Drift

999104423
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 28: RNCC: 5 | RNVC: 2
H20286: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H600: RNCC: 6 | RNVC: 9
H600: RNCC: 6 | RNVC: 9
FA11653: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-784-7236
Wire Wrap Holder

997847236
CSWH-6: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-2727
Socket Wrench

991222727
R62: RNCC: 3 | RNVC: 2
1C7977: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-8753
Hand Screw Starter

991388753
SS5A: RNCC: 3 | RNVC: 2
SS5A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-253-4703
Body Repair Mandrel

992534703
1186900GA: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-558-0863
Socket Wrench Crowfoot Attachment

995580863
P292.06.0864: RNCC: 3 | RNVC: 2
004-306-773-15: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-787-3236
Spade

997873236
UCW 3089/56: RNCC: 3 | RNVC: 2
15141: RNCC: 5 | RNVC: 2
0279-15141: RNCC: 6 | RNVC: 9
AP 15141: RNCC: 6 | RNVC: 9
15141: RNCC: 6 | RNVC: 9

16 Jul 1987

5120-99-431-7471
Charging Wedge

994317471
NO PRIMARY REF 99-431-7471: RNCC: 3 | RNVC: 2
DP1910: RNCC: 5 | RNVC: 2
0434-8116: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-0199
Spanner Wrench

991500199
AE4567: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-530-7537
Dummy Gear

995307537
2BP26836: RNCC: 3 | RNVC: 2
118262ST: RNCC: 6 | RNVC: 9

8 Mar 1990

5120-99-617-7026
Bearing And Bushing Driver Plug

996177026
AE5431: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-213-6081
Strongback

992136081
AM 00 06 32002: RNCC: 3 | RNVC: 2

24 Jul 2009

5120-99-423-1308
Hydraulic Jack

994231308
F3503: RNCC: 3 | RNVC: 2
4Q3285: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5978
Socket Wrench

999105978
BS2558-TABLE 3 3/16X1/4A/F: RNCC: 4 | RNVC: 1
H5216: RNCC: 6 | RNVC: 9
TABLE I(D) 3/16X1/4A/F: RNCC: 6 | RNVC: 9
BS2558: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4410
C Cramp

999104410
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
095705F: RNCC: 5 | RNVC: 2
119/2: RNCC: 5 | RNVC: 2
04074660: RNCC: 5 | RNVC: 2
DL9A: RNCC: 6 | RNVC: 9
DL9A-H503: RNCC: 6 | RNVC: 9
H503: RNCC: 6 | RNVC: 9
UW145E4: RNCC: 6 | RNVC: 9
F1FA11450: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-924-5818
Socket Head Screw Key

999245818
WL12: RNCC: 3 | RNVC: 2
85-25-19-10-1726: RNCC: 5 | RNVC: 2
121-427: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-795-5352
Mechanical Puller

997955352
CH754-517-403: RNCC: 3 | RNVC: 2

14 Sep 1989

5120-99-523-8922
Extractor Tool

995238922
00-03-292000: RNCC: 3 | RNVC: 2
292: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-747-3661
Swage Head

997473661
D12914-56: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-127-9707
Inserted Hammer Face

991279707
H6419: RNCC: 2 | RNVC: 2

25 Apr 1991

5120-99-244-5029
Spanner Wrench

992445029
25899S 901: RNCC: 3 | RNVC: 2

20 Jan 1992

5120-99-471-5185
Rack Bar Jack

994715185
PE26099: RNCC: 3 | RNVC: 2

6 Apr 2010

5120-99-617-7296
Wrench Spanner

996177296
AE5633: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-720-4399
Wrench Spanner

997204399
SSN.04/211.02/401/187 PART 11: RNCC: 3 | RNVC: 2
211.02/401/187 PART 11: RNCC: 5 | RNVC: 1
H926-404278: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-538-6418
Protective Pad

995386418
NO PRIMARY REF 99-538-6418: RNCC: 3 | RNVC: 2
F45305: RNCC: 5 | RNVC: 2
AF45305: RNCC: 5 | RNVC: 2
H454-538-6418: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-977-0534
Nose Tip

999770534
7345-3301: RNCC: 3 | RNVC: 2
7345-3301: RNCC: 5 | RNVC: 2
7345-3301: RNCC: 5 | RNVC: 9
1C8472: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-398-6249
Spanner

993986249
NR81222: RNCC: 3 | RNVC: 2

27 Feb 1991

5120-99-628-9889
Spanner Wrench

996289889
PE50771: RNCC: 3 | RNVC: 2
64DE364: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-252-7422
Valve Guide Remover

992527422
GA5007: RNCC: 3 | RNVC: 2
GA5007: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-9530
Socket Wrench Socket

991209530
1209530: RNCC: 3 | RNVC: 2
1L1209530: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-514-4423
Aligning Punch

995144423
L3C62122: RNCC: 3 | RNVC: 2

30 Sep 2008

5120-99-138-7314
Solid Centre Punch

991387314
P71: RNCC: 3 | RNVC: 2
51738912: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-615-4447
Bearing And Bushing Remover

996154447
CBD10323G01: RNCC: 3 | RNVC: 2

21 Dec 2001

5120-99-717-7171
Torque Wrench Adapter

997177171
PC7097: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-6567
Blacksmiths' Tongs

999106567
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H2979: RNCC: 5 | RNVC: 9
1C2448: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-836-0514
Drain Plug Spanner

998360514
369-30: RNCC: 3 | RNVC: 2
LV7FW369-30: RNCC: 6 | RNVC: 9
16C3488: RNCC: 6 | RNVC: 9

18 Oct 1984

5120-99-535-6467
Mechanical Puller

995356467
YB-6117: RNCC: 3 | RNVC: 2
100557: RNCC: 5 | RNVC: 2
YB-6117: RNCC: 5 | RNVC: 2

12 Feb 1996

5120-99-962-3551
Ammunition Key

999623551
NO PRIMARY REF 99-962-3551: RNCC: 3 | RNVC: 2
RL793: RNCC: 5 | RNVC: 2
Q2CM7690: RNCC: 6 | RNVC: 9

17 Oct 1977

5120-99-430-1439
Micro Setting Gauge

994301439
980M/300: RNCC: 3 | RNVC: 2
1A-4899: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-714-9870
Socket Wrench Socket

997149870
DB344: RNCC: 3 | RNVC: 2
T14140: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-302-0635
Drive Pin Punch Set

993020635
RS/53PP: RNCC: 3 | RNVC: 2
542-380: RNCC: 5 | RNVC: 2

10 Oct 1997

5120-99-837-9891
Generator Tool Kit

998379891
95-0502: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-720-3352
Sizing Sleeve

997203352
T1709: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-863-5451
Hand Terminal Crimping Tool

998635451
47386: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-717-1474
Mechanical Puller

997171474
PE51533: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-693-0143
Piston Ring Expander

996930143
317-50203: RNCC: 3 | RNVC: 2

25 May 2000

5120-99-461-5150
Socket Wrench Handle

994615150
T-13257: RNCC: 3 | RNVC: 2
T-13257: RNCC: 5 | RNVC: 2

20 Jan 2009

5120-99-100-4339

5120-99-005-0154
Oil Seal Replacer

5120-99-968-8217

5120-99-406-2519
Turnlock Fastener Clinching Punch

994062519
A5TOOL3: RNCC: 3 | RNVC: 2
28FP416: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-9353
Torque Wrench

996079353
B160: RNCC: 3 | RNVC: 2
PE15515: RNCC: 5 | RNVC: 1
D1826: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-606-4163
Governor Rack Tool

996064163
393236: RNCC: 3 | RNVC: 2
990O00015: RNCC: 6 | RNVC: 9

4 May 1999

5120-99-499-8681
Face Spanner Wrench Socket

994998681
29851: RNCC: 3 | RNVC: 2
24.5967: RNCC: 5 | RNVC: 1

14 Jan 1992

5120-99-252-0935
Adaptor

992520935
A34170: RNCC: 3 | RNVC: 2
A55640: RNCC: 5 | RNVC: 2
UW214A3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-301-8446
Open End Wrench

993018446
FV 2261152: RNCC: 3 | RNVC: 2

24 Aug 2005

5120-99-317-6069
Spanner Wrench

993176069
33086S: RNCC: 3 | RNVC: 2

20 Jan 1992

5120-99-729-4546
Socket Wrench Set

997294546
DP1: RNCC: 3 | RNVC: 2

7 Jun 2006

5120-99-731-8573
Socket Wrench Socket

997318573
NM52A: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-731-9847
Strap Wrench

997319847
GA5074: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-753-9755
Bearing Installer

997539755
J24447: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-731-2162
Press Tool

997312162
FV2077339: RNCC: 3 | RNVC: 2
AT60038: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-831-8613
Wrench

998318613
07BS012: RNCC: 3 | RNVC: 2
85-690-2763: RNCC: 6 | RNVC: 9

29 Jun 1995

5120-99-469-8001
Wedgie Assembly

994698001
ADH-10N: RNCC: 3 | RNVC: 2
ADH10HP10: RNCC: 5 | RNVC: 2
3AP4414: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-8012
Hole Sheet Metal Holder

991208012
9140-1200: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-830-7983
Wrench Spanner

998307983
V3626-45: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-4713
Hand Hammer

999104713
BS876: RNCC: 4 | RNVC: 1
FA14285: RNCC: 6 | RNVC: 9
910-4713: RNCC: 6 | RNVC: 9
1B1387: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-829-7230
Chainwhee Extractor

998297230
V3609-15: RNCC: 3 | RNVC: 2

22 Mar 1978

5120-99-120-8804

5120-99-651-6359

5120-99-783-1603
Reversible Ratchet

997831603
1703087: RNCC: 3 | RNVC: 2

27 Jun 1986

5120-99-829-8586
Driver Handle

998298586
550: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-828-5139
Bearing Rem Adaptor

998285139
18G47AF: RNCC: 3 | RNVC: 2

24 Aug 1977

5120-99-777-3341
Wrench Spanner

997773341
NFK 889: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-6802
Mechanical Puller

997826802
HW.27639: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-445-2263

5120-99-290-6097
Nosepiece

992906097
39273: RNCC: 3 | RNVC: 2
030470086: RNCC: 6 | RNVC: 9

22 Jan 2003

5120-99-448-0850

5120-99-205-8032

5120-99-659-4812
Torque Wrench

996594812
NEE441: RNCC: 3 | RNVC: 2
NEE441: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-052-3360
Torque Wrench

990523360
5098-5014-54: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-131-9470
Bushings Tool Guide

991319470
EA6405G524-101: RNCC: 3 | RNVC: 2
1MEVGUN: RNCC: 6 | RNVC: 9

28 Jul 2004

5120-99-222-6804
Socket Wrench

992226804
317-0BA: RNCC: 3 | RNVC: 2
CAT2706: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-558-2063
Spanner Wrench

995582063
D19221: RNCC: 3 | RNVC: 2
S117: RNCC: 5 | RNVC: 2
H363-257392: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-727-1110
Torque Screwdriver

997271110
PTS-TC-027: RNCC: 3 | RNVC: 2
4649-675: RNCC: 6 | RNVC: 9

27 Apr 2012

5120-99-562-3534
Spanner Wrench

995623534
FV3028237: RNCC: 3 | RNVC: 2
FH000R40002: RNCC: 6 | RNVC: 9

17 Apr 2000

5120-99-114-4966

5120-99-619-1277
Wrench Spanner

996191277
TRB767627: RNCC: 3 | RNVC: 2
10AG637: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-658-5299
Spanner Wrench

996585299
3AB34636: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-814-8278
Socket Wrench

998148278
FV 219744: RNCC: 3 | RNVC: 2
LV9AHYFV219744: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-817-6690

5120-99-822-1682

5120-99-812-3950

5120-99-708-6718
Vise Jaw Caps

997086718
212940: RNCC: 3 | RNVC: 2
TA567: RNCC: 5 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

4 Oct 2005

5120-99-465-8190
Stop Ring Extractor

5120-99-462-6221

5120-99-120-5628
Rivetter Nosepiece

991205628
12643Y: RNCC: 3 | RNVC: 2
12604-5: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-4161
Spe Assembly Drift

994234161
17229023-0: RNCC: 3 | RNVC: 2
17229023-0: RNCC: 5 | RNVC: 2
021JB-026: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-582-5913
Hand Tube Bender

995825913
NO PRIMARY REF 99-582-5913: RNCC: 3 | RNVC: 2
423-6641: RNCC: 5 | RNVC: 2

3 May 2011

5120-99-533-2902
Cable Binding Tool

995332902
NO PRIMARY REF 99-533-2902: RNCC: 3 | RNVC: 2
400: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-422-3641
Cylin Holding Block

994223641
NO PRIMARY REF 99-422-3641: RNCC: 3 | RNVC: 2
MT1026-20: RNCC: 5 | RNVC: 9
27Q34757: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-2491
Drill Drift

996662491
NO PRIMARY REF 99-666-2491: RNCC: 3 | RNVC: 2
M15212: RNCC: 5 | RNVC: 2
695-030: RNCC: 5 | RNVC: 2

28 Aug 2004

5120-99-716-8876
Mechanical Puller

997168876
NO PRIMARY REF 99-716-8876: RNCC: 3 | RNVC: 2
WS11081: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-781-8258
Sizing Sleeve

997818258
T1675: RNCC: 3 | RNVC: 2

8 Sep 1987

5120-99-782-2337
Torque Wrench

997822337
ADS 40: RNCC: 3 | RNVC: 2
010220: RNCC: 5 | RNVC: 2
H23161: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-465-7703
Socket Wrench Extension

994657703
1M63A: RNCC: 3 | RNVC: 2
4CA4322: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-304-0924
Pinch Bar

993040924
1680383: RNCC: 3 | RNVC: 2
FL001880012: RNCC: 6 | RNVC: 9

26 Jun 2000

5120-99-989-1077
Torque Wrench

999891077
HFT5000: RNCC: 3 | RNVC: 2
HFT5000: RNCC: 5 | RNVC: 2
HFT5000: RNCC: 5 | RNVC: 2
FL9708M0076: RNCC: 6 | RNVC: 9

13 Oct 1997

5120-99-968-4225
Hand Vise Jaw

999684225
2036T000: RNCC: 3 | RNVC: 2

21 Dec 2004

5120-99-963-8683
Socket Wrench Handle Bar

999638683
CM3598: RNCC: 3 | RNVC: 2
0CM3598: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-2361
Socket Wrench Socket

991302361
BS4006-TABLE 4 4MM: RNCC: 4 | RNVC: 1
ESM404: RNCC: 5 | RNVC: 2
547-240: RNCC: 5 | RNVC: 2
DHM4: RNCC: 5 | RNVC: 2
H6788: RNCC: 6 | RNVC: 9
1L268: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9
TABLE I(A) 4MM: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-582-5560
Rivet Swage Tool

995825560
SC/A3/53138: RNCC: 3 | RNVC: 2
680/2/26471/000: RNCC: 5 | RNVC: 2
FE000XR0089: RNCC: 6 | RNVC: 9

31 Jul 2000

5120-99-910-6353
Socket Wrench Socket

999106353
BS4006-TABLE 7-7/16A/F: RNCC: 4 | RNVC: 1
H20180: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
FA17569: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4580: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-4658
Blind Riveter Head

991204658
A1 5-321N0PEN: RNCC: 3 | RNVC: 2
9004C6: RNCC: 3 | RNVC: 2
A1: RNCC: 5 | RNVC: 1
1C6974: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-8193
Pliers

994238193
NO PRIMARY REF 99-423-8193: RNCC: 3 | RNVC: 2
9059-2: RNCC: 5 | RNVC: 2
557441: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-2625
Rear Hub Extractor

994012625
18G46: RNCC: 3 | RNVC: 2
16C3291: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-409-6647
Mortar Float

994096647
21 3498: RNCC: 3 | RNVC: 2

2 Feb 1993

5120-99-148-3230
Crowfoot Attachment

5120-99-712-9489
Oil Seal Replacer

997129489
FPJ8468: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-470-2730

5120-99-544-8351

5120-99-528-6026
Spanner Wrench

5120-99-468-0638

5120-99-252-7428
Replacer Kit

992527428
GA5101-4: RNCC: 3 | RNVC: 2
GA5101-4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-252-7427
Replacer Remover

992527427
GA5054: RNCC: 3 | RNVC: 2
GA5054: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-422-5665
Socket Wrench Handle Bar

994225665
CM5606: RNCC: 3 | RNVC: 2
C1W1108: RNCC: 5 | RNVC: 1
121085: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-5390

5120-99-531-1355
Elec Alignment Tool

995311355
NO PRIMARY REF 99-531-1355: RNCC: 3 | RNVC: 2
JFD5284: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-361-3196
Socket Wrench Socket

993613196
NO PRIMARY REF 99-361-3196: RNCC: 3 | RNVC: 2
KEN-583-2730K: RNCC: 5 | RNVC: 2
KEN-583-2730K: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-402-0014
Sling Bridle

994020014
NO PRIMARY REF 99-402-0014: RNCC: 3 | RNVC: 2
MA36300: RNCC: 5 | RNVC: 2
16C6474: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-690-7999
Mechanical Press

996907999
SGE3210-1100: RNCC: 3 | RNVC: 2
1286T-003: RNCC: 6 | RNVC: 9

29 May 2012

5120-99-151-6036
Socket Wrench Extension

991516036
NO PRIMARY REF 99-151-6036: RNCC: 3 | RNVC: 2
332/G5832: RNCC: 5 | RNVC: 2
KEN-583-7580K: RNCC: 5 | RNVC: 2

25 Mar 2010

5120-99-667-2544
Spanner Wrench

996672544
M010-0148-PCD: RNCC: 3 | RNVC: 2
FP75: RNCC: 6 | RNVC: 9

17 Dec 2008

5120-99-659-2285
Screwdriver Bit

996592285
460009142D: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-760-6503

5120-99-398-7280
Battery Extrac Tool

993987280
0708: RNCC: 3 | RNVC: 2

25 Jul 1997

5120-99-135-8228

5120-99-587-8584
Spanner Wrench

995878584
9337C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-607-2879
Tool

996072879
GZ31255: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-382-4193
Face Spanner Wrench Socket

993824193
MBEU192135: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-99-970-2063
Flat Tip Screwdriver

999702063
5AA73343: RNCC: 3 | RNVC: 2
5AA73343: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-629-9247
Mechanical Puller

996299247
A0117335: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-990-9807
Socket Wrench Socket

999909807
NMT-179: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-99-803-1162
Wrench Spanner

998031162
23855-00538: RNCC: 3 | RNVC: 2

5 Feb 1992

5120-99-835-7407
Wrench Tool

998357407
SRM0305W: RNCC: 3 | RNVC: 2
CST4010-03: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-645-0565
Seal Inserter

996450565
WD0388-00325-101: RNCC: 3 | RNVC: 2

30 Jun 1981

5120-99-102-4812
Socket Head Screw Key

991024812
A35454: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-977-3528
Combination Box And Open End Wrench

999773528
OEXM200: RNCC: 3 | RNVC: 2
0EXM200: RNCC: 5 | RNVC: 2
1C8528: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-3913
Open End Wrench

991243913
0SA272: RNCC: 3 | RNVC: 2
T2AA2104: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-425-0635
Wrench Spanner

5120-99-465-6726

5120-99-465-6995
Crowfoot Wrench

5120-99-467-9207
Spanner Wrench

5120-99-141-3052

5120-99-604-8501
Fastener Extractor

996048501
A310435: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-135-8520
Vise Jaw Caps

991358520
7226: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-206-3640
Tilt Cylind Spanner

992063640
MT414: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-2602

5120-99-127-6567

5120-99-149-1859

5120-99-344-3542
Pocket Type Scribe

993443542
NO PRIMARY REF 99-344-3542: RNCC: 3 | RNVC: 2
E225: RNCC: 5 | RNVC: 2
C569-70T279428: RNCC: 6 | RNVC: 9

24 May 2002

5120-99-725-8817
Wrench Spanner

997258817
IFH8502: RNCC: 3 | RNVC: 2

24 Jan 1986

5120-99-725-8221
Separato Seal Guide

997258221
MC1269018: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-753-0041
Vibration Damper Gu

997530041
17219208-0: RNCC: 3 | RNVC: 2
3376638: RNCC: 5 | RNVC: 2
17219208-0: RNCC: 5 | RNVC: 2
021JB-006: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-899-4042
Adjustab Wrench Set

998994042
NO PRIMARY REF 99-899-4042: RNCC: 3 | RNVC: 2
KEN501-1600K: RNCC: 5 | RNVC: 2
059-02-008: RNCC: 5 | RNVC: 2

8 May 2001

5120-99-825-0849
Pinion Oil Seal Rep

998250849
LRT-51-002: RNCC: 3 | RNVC: 2
RO.1008A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-924-5862
Drive Pin Punch

999245862
7468: RNCC: 3 | RNVC: 2
85-25-19-10-1793: RNCC: 5 | RNVC: 2
H106-202351: RNCC: 6 | RNVC: 9
88700-706-222: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-916-4185
Bearing And Bushing Remover

999164185
M12146-01: RNCC: 3 | RNVC: 2

10 Aug 2012

5120-99-724-9783

5120-99-424-0981
Open End Wrench

994240981
B209816: RNCC: 3 | RNVC: 2
B209816: RNCC: 5 | RNVC: 9
26FX95504: RNCC: 6 | RNVC: 9
26FX95504: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-7523
Socket Wrench Adapter-Extension

996597523
460009186D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-530-0928
Socket Wrench Adapter

995300928
AK691: RNCC: 1 | RNVC: 2
WT1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-433-4646
Open Jaw Spanner

994334646
3419-37415: RNCC: 3 | RNVC: 2
0277-53381: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-9886
Rocker Reaming Jig

994019886
NO PRIMARY REF 99-401-9886: RNCC: 3 | RNVC: 2
Z8067: RNCC: 5 | RNVC: 2
16C5514: RNCC: 6 | RNVC: 9

27 Feb 1980

5120-99-423-4597
Sighting Spanner

994234597
NO PRIMARY REF 99-423-4597: RNCC: 3 | RNVC: 2
9033-44: RNCC: 5 | RNVC: 2
558626: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-2060
Open End Wrench

991362060
R42: RNCC: 3 | RNVC: 2
H6816: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-151-4169
Socket Wrench Screwdriver Attachment

991514169
2025.80 T10: RNCC: 3 | RNVC: 2

15 Oct 2009

5120-99-345-7270
Cutting Tool

993457270
D8496: RNCC: 3 | RNVC: 2
WD17145: RNCC: 5 | RNVC: 2
UWS4A1: RNCC: 6 | RNVC: 9

14 Aug 2007

5120-99-465-8222
Box Wrench

994658222
TL3094: RNCC: 3 | RNVC: 2
25M21578: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-517-3217
Locki Tool Assembly

995173217
69302426: RNCC: 3 | RNVC: 2
FF962UR0207: RNCC: 6 | RNVC: 9

26 Sep 1996

5120-99-608-7282
Torque Wrench

996087282
TM9: RNCC: 3 | RNVC: 2
1703031: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-753-9753
Valve Pin Remover

997539753
J24412-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-750-8071
Extractor Assembly

997508071
11793: RNCC: 3 | RNVC: 2
B 11793: RNCC: 5 | RNVC: 2

14 Aug 2007

5120-99-745-5129
Socket Wrench Handle Bar

997455129
55437A2ITEM3: RNCC: 3 | RNVC: 2
55437A2-3: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-799-5989
Mechanical Puller

997995989
104631001-TEA-9.: RNCC: 3 | RNVC: 2
104631001-TEA-9.: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-774-3179
Operating Handle As

997743179
DM.23572: RNCC: 3 | RNVC: 2
2DM.23572 SHEET 1: RNCC: 5 | RNVC: 2

28 Aug 1986

5120-99-799-5964
Mechanical Puller

997995964
200886218-AFT-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-799-7325
Socket Wrench

997997325
848728 COLUMN B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-149-2247
Installation Tool

991492247
DP134-9: RNCC: 3 | RNVC: 2
91727076: RNCC: 5 | RNVC: 2

20 Nov 1991

5120-99-994-9049
Pick-Of Setting Jig

999949049
MONT 21698: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-973-9624
Torque Wrench

999739624
HU24351: RNCC: 3 | RNVC: 2

8 Aug 2003

5120-99-980-0063
Sleeve

999800063
00861055: RNCC: 3 | RNVC: 2

16 Aug 1999

5120-99-461-7623
Spanner

994617623
A013149: RNCC: 3 | RNVC: 2
27G2096: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-549-6036
Positioner

995496036
SL09: RNCC: 3 | RNVC: 2
SL09: RNCC: 5 | RNVC: 2
032FF0050: RNCC: 6 | RNVC: 9

8 Jul 2003

5120-99-136-9225
Screwdriver Bit

991369225
CRA5A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-0345
Mechanical Puller

996550345
460009232C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-607-1577
Torque Wrench Adapter

996071577
HU3121: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-466-6436

5120-99-453-7319

5120-99-710-6966
Socket Wrench Socket

997106966
WA22: RNCC: 3 | RNVC: 2
1701010: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-5025
Socket Wrench Screwdriver Attachment

991365025
A33-6M: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 26: RNCC: 4 | RNVC: 1
H6853: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-734-7395
Cab Tensioning Tool

997347395
MARK 10: RNCC: 3 | RNVC: 2
1H/1334: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-418-4865
Checking Fixture

994184865
WB5-88-195: RNCC: 3 | RNVC: 2
26WX95165: RNCC: 6 | RNVC: 9
26WX95165: RNCC: 6 | RNVC: 9

3 Sep 1973

5120-99-598-6162
Shaft Assembly Tool

995986162
NTS14749: RNCC: 3 | RNVC: 2
NTS14749: RNCC: 5 | RNVC: 2

4 Dec 2001

5120-99-617-4248
Drift

996174248
PE59975: RNCC: 3 | RNVC: 2
PE59975: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-887-4139
Floor Panel Tool

998874139
ER5305G001-041: RNCC: 3 | RNVC: 2

5 Oct 2007

5120-99-130-2639
Wrench

991302639
NO PRIMARY REF 99-130-2639: RNCC: 3 | RNVC: 2
FT-2582: RNCC: 5 | RNVC: 2

14 Jul 2000

5120-99-838-3281
Clamp Assembly

998383281
SGE3240-2010: RNCC: 3 | RNVC: 2

3 Apr 2013

5120-99-910-6330
Socket Wrench Handle

999106330
BS4006-TABLE 32 12.50MM: RNCC: 3 | RNVC: 1
H4430: RNCC: 3 | RNVC: 2
25408: RNCC: 5 | RNVC: 2
5010559254088: RNCC: 5 | RNVC: 2
H20019: RNCC: 5 | RNVC: 2
F1FA17410: RNCC: 6 | RNVC: 9
1L50: RNCC: 6 | RNVC: 9
UW214A3: RNCC: 6 | RNVC: 9
0277: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6430
Tinmans Stake

999106430
NO PRIMARY REF 99-910-6430: RNCC: 3 | RNVC: 2
H2556: RNCC: 5 | RNVC: 2
1C2313: RNCC: 6 | RNVC: 9
FA17692: RNCC: 6 | RNVC: 9
H2556: RNCC: 6 | RNVC: 9

4 Feb 1984

5120-99-910-4583
Stud Remover

999104583
H720: RNCC: 2 | RNVC: 2
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
H20133: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5691
Asphalt Rake

999105691
UKD1SPR0V2188-161N: RNCC: 3 | RNVC: 2
ACE651: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-891-0510
Fin Comb

998910510
QLAZ-20: RNCC: 3 | RNVC: 2
040537R1BC02752: RNCC: 6 | RNVC: 9

1 Feb 2006

5120-99-401-9663
Pneumatic Tire Valve Repair Tool

994019663
TVT03: RNCC: 3 | RNVC: 2
3263: RNCC: 3 | RNVC: 2
67: RNCC: 5 | RNVC: 2
67RK: RNCC: 5 | RNVC: 2
1C6124: RNCC: 6 | RNVC: 9
3263: RNCC: 6 | RNVC: 9
567001: RNCC: 6 | RNVC: 9
560-0001-0000-99-723-4: RNCC: 6 | RNVC: 9
16C3914: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-4654
Blind Riveter Head

991204654
A2 1-81N0PEN: RNCC: 3 | RNVC: 2
8999C4: RNCC: 3 | RNVC: 2
A2: RNCC: 5 | RNVC: 1
8106: RNCC: 6 | RNVC: 9
1C6916: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-783-9214

5120-99-758-6038
Socket Head Scr Key

5120-99-789-3679
Cylinder Li Adaptor

5120-99-765-4224
Torque Wrench Adapter

997654224
29889: RNCC: 3 | RNVC: 2

14 Nov 1992

5120-99-665-6914
Hand Tool

996656914
STD419C/48Y: RNCC: 3 | RNVC: 2
26DL-95958: RNCC: 6 | RNVC: 9

20 Jun 2002

5120-99-229-4225
Face Spanner Wrench Socket

992294225
MBEU83199: RNCC: 3 | RNVC: 2
991D0C: RNCC: 6 | RNVC: 9
99PH01-477: RNCC: 6 | RNVC: 9

25 Aug 1999

5120-99-707-2514
Hand Banding Rool

997072514
600-061: RNCC: 3 | RNVC: 2

29 Oct 2002

5120-99-144-6117
Assembly Gla Sleeve

991446117
ST617: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-560-5442
Socket Wrench

995605442
D36051: RNCC: 3 | RNVC: 2
S125: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-720-4528
Handle Assembly

997204528
01TC15432: RNCC: 3 | RNVC: 2
01TC15432: RNCC: 5 | RNVC: 2
01TC15432: RNCC: 5 | RNVC: 2

9 Jun 1999

5120-99-670-3716
Staking Tool

996703716
AML16950: RNCC: 3 | RNVC: 2
AML16950: RNCC: 5 | RNVC: 2

4 Nov 1999

5120-99-199-9822
Plug

5120-99-767-1277
Fi Open Jaw Spanner

5120-99-456-7692
Socket Wrench Socket

994567692
002630413: RNCC: 3 | RNVC: 2
002630413: RNCC: 5 | RNVC: 2

17 Oct 2001

5120-99-950-4230
Draw Bolt

999504230
NO PRIMARY REF 99-950-4230: RNCC: 3 | RNVC: 2
80-05-43-0555: RNCC: 5 | RNVC: 2

18 Jan 1977

5120-99-910-4706
Hand Hammer

999104706
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
1 LB: RNCC: 5 | RNVC: 1
0274: RNCC: 6 | RNVC: 9
1B1382: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-708-9161
Socket Wrench Crowfoot Attachment

997089161
MTE 0254-02: RNCC: 3 | RNVC: 2
251/02: RNCC: 5 | RNVC: 2
175/02 SCALE 03377-16/5/91: RNCC: 6 | RNVC: 9

19 Sep 1991

5120-99-252-4766
Screwdriver Bit

992524766
TW-6B4R: RNCC: 3 | RNVC: 2
1L/808: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-5887
Hand Hammer

998105887
8401-1090: RNCC: 3 | RNVC: 2
JSF8401-1090: RNCC: 5 | RNVC: 2

5 Feb 1997

5120-99-422-5758
Barrel Wrench

994225758
CM2168ANDAN9A: RNCC: 3 | RNVC: 2
121036: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-2504
Open End Wrench

991352504
RSM2057: RNCC: 3 | RNVC: 2
SLM 6057: RNCC: 5 | RNVC: 2
0DM2057: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-215-6589
Torque Wrench

992156589
EOT3743: RNCC: 3 | RNVC: 2

14 Sep 1996

5120-99-531-7739

5120-99-529-4535
Spanner Wrench

5120-99-999-3810
El Pin Straightener

5120-99-194-3120

5120-99-758-3011

5120-99-097-0142
Electr Holding Tool

5120-99-710-7214
Open End Wrench

5120-99-965-4452
Wrench Spanner

999654452
NO PRIMARY REF 99-965-4452: RNCC: 3 | RNVC: 2
008939: RNCC: 5 | RNVC: 2
0S5840A: RNCC: 5 | RNVC: 2

27 Jul 1981

5120-99-141-3108
Bearing Replacer

991413108
992/07603: RNCC: 3 | RNVC: 2

4 Jul 1990

5120-99-388-5726
Torque Wrench

993885726
A14020: RNCC: 3 | RNVC: 2
LE435C/851/09/59: RNCC: 6 | RNVC: 9

7 Apr 1999

5120-99-772-6987
Template

997726987
71942: RNCC: 3 | RNVC: 2
316115: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-530-3837
Torque Wrench Adapter

995303837
KU.12925: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-748-2466
Applicator

997482466
43055: RNCC: 3 | RNVC: 2

23 Sep 1997

5120-99-459-0606
Withdr Slip Adaptor

994590606
HW17079: RNCC: 3 | RNVC: 2
64VV1593: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-521-0441
Spanner Wrench

995210441
B602494: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-962-1951

5120-99-963-0262
Spanner Wrench

5120-99-666-6054
Mechanical Puller

996666054
15370000: RNCC: 3 | RNVC: 2

9 Feb 2006

5120-99-438-5928
Mechanical Puller

5120-99-659-7521
Box Wrench

996597521
460009069C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-151-2834
Pressing Out Tool

991512834
2667736: RNCC: 3 | RNVC: 2
FJ961DT0008: RNCC: 6 | RNVC: 9

31 Aug 1996

5120-99-551-5548
Driftpin

995515548
A10614: RNCC: 3 | RNVC: 2
500112016: RNCC: 5 | RNVC: 2

5 Dec 2007

5120-99-406-2503
Clinching Pun Block

994062503
A3BLOCK1: RNCC: 3 | RNVC: 2
28FP400: RNCC: 6 | RNVC: 9
SS632A1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-433-4426

5120-99-893-8159
Spanner Wrench

998938159
110079-15827: RNCC: 3 | RNVC: 2
26VC-96084: RNCC: 6 | RNVC: 9

22 Feb 2002

5120-99-719-4268
Spanner Wrench

997194268
9002-417: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-184-6443
Screwdriver Bit

991846443
NO PRIMARY REF 99-184-6443: RNCC: 3 | RNVC: 2
769-204: RNCC: 5 | RNVC: 2

4 May 2011

5120-99-462-6507
Socket Head Screw Key Set

994626507
NO PRIMARY REF 99-462-6507: RNCC: 3 | RNVC: 2
199-5202: RNCC: 5 | RNVC: 2

27 May 2000

5120-99-436-0309
Extractor

994360309
NO PRIMARY REF 99-436-0309: RNCC: 3 | RNVC: 2
NT3943: RNCC: 5 | RNVC: 2
5UA9118: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-468-5080
Tool

994685080
NO PRIMARY REF 99-468-5080: RNCC: 3 | RNVC: 2
W26906CSH1: RNCC: 5 | RNVC: 2
10AG11: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-3090
Sleeve Holding Tool

991503090
NO PRIMARY REF 99-150-3090: RNCC: 3 | RNVC: 2
AM24760: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-149-1704
Mechanical Puller

991491704
460002184: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-4258
Hand Blind Riveter

991244258
7161-0004: RNCC: 3 | RNVC: 2
7161: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-174-5733
Screwdriver Bit

991745733
ENH.304: RNCC: 3 | RNVC: 2
ANIC-BE-8330093A1: RNCC: 6 | RNVC: 9

24 Jul 2006

5120-99-418-7510
Cone Adjust Spanner

994187510
NO PRIMARY REF 99-418-7510: RNCC: 3 | RNVC: 2
UD61558: RNCC: 5 | RNVC: 2
0633-805316: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-465-7212
Drive Pin Punch

994657212
T77788: RNCC: 3 | RNVC: 2
PE50101: RNCC: 5 | RNVC: 2
64DE16: RNCC: 6 | RNVC: 9
64DE16: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-533-1598

5120-99-455-8840
Spanner Wrench

5120-99-983-0198
Mechanical Puller Attachment

999830198
460009450-9: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-6517
Blacksmith's Top Swage

999106517
H2698: RNCC: 2 | RNVC: 2
H2698: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-414-1962
Filter Body Spanner

994141962
NO PRIMARY REF 99-414-1962: RNCC: 3 | RNVC: 2
WB5-88-569: RNCC: 5 | RNVC: 9
26WX95221: RNCC: 6 | RNVC: 9
26WX95221: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-0791
Socket Wrench Adapter

991240791
DSAP: RNCC: 3 | RNVC: 2
031320: RNCC: 5 | RNVC: 2
1702350: RNCC: 5 | RNVC: 2
0277-544379: RNCC: 6 | RNVC: 9
PATH6394: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-445-0739

5120-99-681-6020
Socket Wrench Socket

996816020
NO PRIMARY REF 99-681-6020: RNCC: 3 | RNVC: 2
KEN-582-6960K: RNCC: 5 | RNVC: 2
KEN-582-6960K: RNCC: 6 | RNVC: 9

5 Sep 2011

5120-99-659-4605
Mechanical Puller

996594605
83750012-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-461-8197
Tool Assembly

994618197
AM22574: RNCC: 3 | RNVC: 2
27G3499: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-873-6293
Adaptor

998736293
FV 3024997: RNCC: 3 | RNVC: 2
FL9908J0152: RNCC: 6 | RNVC: 9

23 Mar 1999

5120-99-713-8262
Spanner Wrench

997138262
ST45748: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-103-5324
Spanner Wrench

991035324
17103-178: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-8828

5120-99-833-4206

5120-99-845-1505

5120-99-845-6064
Socket Wrenc Socket

5120-99-924-4391
Brush Steel Handle

5120-99-428-7651

5120-99-488-7407
Socket Wrench Adapter

994887407
SAC 214: RNCC: 3 | RNVC: 2

24 Nov 2004

5120-99-812-9123
Spanner Wrench

998129123
37507T: RNCC: 3 | RNVC: 2
LV4-37507T: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-2016
Box Spann Tommy Bar

998102016
NO PRIMARY REF 99-810-2016: RNCC: 3 | RNVC: 2
LV1BRCZ3032: RNCC: 5 | RNVC: 2

4 Apr 1991

5120-99-422-5771
Spanner Wrench

994225771
N0D2107-44: RNCC: 3 | RNVC: 2
121205: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-7344
Drive Pin Punch

997107344
161A: RNCC: 3 | RNVC: 2
100193: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-923-8101
Weath Insertion Eye

999238101
A5026: RNCC: 3 | RNVC: 2
0276-923-8101: RNCC: 6 | RNVC: 9
1C6532: RNCC: 6 | RNVC: 9
0276-276041: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-729-4522
Joint Universal Dri

997294522
NO PRIMARY REF 99-729-4522: RNCC: 3 | RNVC: 2
04-4335/A91: RNCC: 5 | RNVC: 2
ANIC-BE-8330048: RNCC: 6 | RNVC: 9

3 Sep 2004

5120-99-423-4602
Release And Spanner

994234602
NO PRIMARY REF 99-423-4602: RNCC: 3 | RNVC: 2
9031-74: RNCC: 5 | RNVC: 2
558691: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-910-5981
Socket Wrench

999105981
BS2558-TABLE 3 7/16X1/2A/F: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5219: RNCC: 6 | RNVC: 9
TABLE I(D) 7/16X1/2A/F: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-705-3167
Leveling-Support Jack

997053167
PE26683: RNCC: 3 | RNVC: 2

4 Aug 2009

5120-99-131-6183
Mounting Tool

991316183
2 0065-917: RNCC: 3 | RNVC: 2

7 Mar 2003

5120-99-977-1866
Combined Extension

999771866
B2782-1: RNCC: 3 | RNVC: 2
0277-0770003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-400-2118
Spanner Wrench

994002118
9515.W091: RNCC: 3 | RNVC: 2
60-90 9515W091: RNCC: 5 | RNVC: 2
225-282: RNCC: 5 | RNVC: 2

7 Feb 2006

5120-99-136-9634
Flat Tip Screwdriver

991369634
H6969: RNCC: 2 | RNVC: 2
BS2559: RNCC: 4 | RNVC: 1
11655777-11: RNCC: 6 | RNVC: 9
11655777: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-655-0319
Mechanical Puller

996550319
460009067C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-308-7040
Joining Strip Tool

993087040
40000390: RNCC: 3 | RNVC: 2

7 Mar 2011

5120-99-910-5587
Drive Pin Punch

999105587
BS3066: RNCC: 4 | RNVC: 1
H20316: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 33: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1937: RNCC: 6 | RNVC: 9
H1937: RNCC: 6 | RNVC: 9
FA16012: RNCC: 6 | RNVC: 9
H1937: RNCC: 6 | RNVC: 9
1B1835: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-1699
Hand Hammer

991371699
N.W.187: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
H6974: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5518
Pliers

999105518
DEFSTAN51-10 TABLE A: RNCC: 4 | RNVC: 1
H20861: RNCC: 5 | RNVC: 2
DEFSTAN51-10: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H1843: RNCC: 6 | RNVC: 9
TABLE A: RNCC: 6 | RNVC: 9
BS3087: RNCC: 6 | RNVC: 9
BS3087 PART 1-TABLE 11: RNCC: 6 | RNVC: 9
FA51866: RNCC: 6 | RNVC: 9
1B1798: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-749-4153

5120-99-763-2241

5120-99-668-2405
Face Spanner Wrench Socket

996682405
FV2284817: RNCC: 3 | RNVC: 2

2 Dec 2011

5120-99-148-9715
Contr Tool Assembly

991489715
6632078: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-963-6083

5120-99-752-5503
Loc Extraction Tool

997525503
A0118976: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-99-749-1150
Spanner Wrench

997491150
BS 1524: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-465-7263
Flexibox Seal Tool

5120-99-748-9812
Screw Thread Insert Tang Breakoff Tool

997489812
ATB54: RNCC: 3 | RNVC: 2
71401504705: RNCC: 5 | RNVC: 2
PE59954: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-4329
Pinch Bar

999104329
UKSC4576: RNCC: 4 | RNVC: 1
A3-9796: RNCC: 5 | RNVC: 1
H141: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-2345
Socket Wrench Socket

991392345
HBM30: RNCC: 3 | RNVC: 2
214-9999: RNCC: 5 | RNVC: 2
24-4277-9: RNCC: 5 | RNVC: 2
214-9999: RNCC: 5 | RNVC: 2
TSKM30: RNCC: 5 | RNVC: 2
LSM230: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-307-1742
Box Wrench

993071742
FD2305: RNCC: 3 | RNVC: 2
420-071742: RNCC: 6 | RNVC: 9
W20F0DEN1223: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-716-3032
Spanner Wrench

997163032
PE50179: RNCC: 3 | RNVC: 2
T77931: RNCC: 5 | RNVC: 2
64DE204: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-7147
Spanner Wrench

996077147
PE52082: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-0295
Screwdriver Bit

991200295
BS2559PT5S1ZE2A: RNCC: 2 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
BS2559PT5: RNCC: 5 | RNVC: 1
H5692: RNCC: 5 | RNVC: 2
778/1/1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-609-1674
Extractor Base

996091674
NO PRIMARY REF 99-609-1674: RNCC: 3 | RNVC: 2
NTS10909-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-127-6561

5120-99-137-1374
Hand Tube Flaring Tool

991371374
263: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-808-8247
Socket Wrench

998088247
3120/21291: RNCC: 3 | RNVC: 2
B3120/21291: RNCC: 5 | RNVC: 2

14 Jun 1996

5120-99-448-8653
Box Spanner

994488653
NO PRIMARY REF 99-448-8653: RNCC: 3 | RNVC: 2
1000-806: RNCC: 5 | RNVC: 2
88740-705-436: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-718-3374
Socket Wrench Socket

997183374
EB812: RNCC: 3 | RNVC: 2
H21903: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-206-1383
Hose Strap Band Clamping Tool

992061383
F2636: RNCC: 3 | RNVC: 1
3A4521: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6174
Socket Wrench

999106174
BS2558-TABLE 5 11X9BA: RNCC: 4 | RNVC: 1
DEF STAN 51-11 PART 3: RNCC: 4 | RNVC: 1
TABLE I(C) 11X9BA: RNCC: 6 | RNVC: 9
BS2558: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-277-5473
Crimping Tool Die

992775473
29197: RNCC: 3 | RNVC: 2
GRE 1: RNCC: 6 | RNVC: 9
MLSIPT/MLS2: RNCC: 6 | RNVC: 9

20 Nov 2000

5120-99-269-1933
Socket Wrench Extension

992691933
S.210RC: RNCC: 3 | RNVC: 2
NPPOGAMA4/080104/LOCEXT: RNCC: 6 | RNVC: 9
0402V0038: RNCC: 6 | RNVC: 9

23 Jan 2004

5120-99-001-6258
Tell Push-Back Tool

990016258
FV 2213603: RNCC: 3 | RNVC: 2

7 Sep 1994

5120-99-124-2164
Socket Wrench Socket

991242164
DB312: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-782-0025

5120-99-819-1770
Timi Adjusting Tool

998191770
JD2B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-768-7395

5120-99-779-4136
Termi Crimping Tool

5120-99-768-7352
Crowfoot Attachment

5120-99-772-5978
Open End Wrench

5120-99-139-7794
Socket Wrench

991397794
100182-9000-004: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-599-9693
Socket Wrench Handle

995999693
KEN-582-6420K: RNCC: 3 | RNVC: 2
KEN-582-6420K: RNCC: 5 | RNVC: 2

1 Apr 2004

5120-99-996-0392
Seal Inserter

999960392
4A41-W8-222: RNCC: 3 | RNVC: 2
4A41W8-222: RNCC: 5 | RNVC: 2

18 May 1995

5120-99-910-5870
Ratchet Screwdriver

999105870
BS3118-SIZE NO. 2: RNCC: 2 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H20033: RNCC: 5 | RNVC: 2
BS3118: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
1C6452: RNCC: 6 | RNVC: 9
H5188: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-6721
Face Spanner Wrench Socket

996666721
PP/J 1133 LB: RNCC: 3 | RNVC: 2
062CE-046: RNCC: 6 | RNVC: 9
0625P-070: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-910-4404
C Clamp

999104404
H489: RNCC: 2 | RNVC: 2
GC12: RNCC: 3 | RNVC: 2
120/12: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
H489: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-581-9358
Wheel

995819358
OE-B-14529: RNCC: 3 | RNVC: 2

4 Sep 2012

5120-99-808-3687
S Bush Key Assembly

998083687
7044-707: RNCC: 3 | RNVC: 2
7044-707: RNCC: 5 | RNVC: 2
Y7044-707: RNCC: 5 | RNVC: 2
LV6MT12CB7044-707: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-145-0896

5120-99-101-3518

5120-99-056-0148
Electron Wiring Jig

990560148
VW3601: RNCC: 3 | RNVC: 1
RCL251: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-553-3215
Socket

995533215
MAS11083: RNCC: 3 | RNVC: 2

10 Mar 2011

5120-99-250-8110
Injector Nozzl Tool

992508110
PC24519: RNCC: 3 | RNVC: 2
PC24519: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-747-5661
Mechanical Puller

997475661
P-891141-403: RNCC: 3 | RNVC: 2
P891141-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-208-9471
Inserted Hammer Face

992089471
412PF: RNCC: 3 | RNVC: 2
712PF: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-252-8381
Fine Ratchet Handle

992528381
A-77: RNCC: 3 | RNVC: 2
1L/800: RNCC: 6 | RNVC: 9
A77: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-7482
Box Wrench

991357482
BS3555-TABLE 1 7X8MM: RNCC: 4 | RNVC: 1
6RBM78: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 2: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT2: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6716: RNCC: 6 | RNVC: 9
TABLE I(A) 7X8MM: RNCC: 6 | RNVC: 9
6RBM78: RNCC: 6 | RNVC: 9
1C8220: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-474-4924
Hammer

994744924
3/214: RNCC: 3 | RNVC: 2
732-533: RNCC: 5 | RNVC: 2

1 Sep 1999

5120-99-410-3543
Cylind Lifting Tool

994103543
EB001346: RNCC: 3 | RNVC: 2

1 Jul 1997

Load More Results