What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 52 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 52 of 108

5120-99-137-6868

5120-99-137-2791
Crimping To Locator

5120-99-135-9022

5120-99-608-7312
Socket Head Screw Key

996087312
HU 13804: RNCC: 3 | RNVC: 2
HU 13804: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-610-0603
Guide

996100603
CH648-173: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-776-8499
Module Extract Tool

997768499
MM-R00: RNCC: 3 | RNVC: 2
MM-R00 ENVELOPE: RNCC: 6 | RNVC: 9
1H/1379: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-542-4603
Open End Wrench

995424603
NO PRIMARY REF 99-542-4603: RNCC: 3 | RNVC: 2
TZ499018: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-933-1569

5120-99-923-7341
Spanner Wrench

5120-99-138-8301
Solid Centre Punch

991388301
P70: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-5496
Combination Box And Open End Wrench

991205496
CTA624: RNCC: 3 | RNVC: 2
3517: RNCC: 5 | RNVC: 2
H21168: RNCC: 5 | RNVC: 2
BS192: RNCC: 6 | RNVC: 9
BS3555: RNCC: 6 | RNVC: 9
F1FA17082: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-242-9502
Thrus Removing Tool

992429502
SD50699: RNCC: 3 | RNVC: 2
SD50699: RNCC: 3 | RNVC: 9

20 Oct 2010

5120-99-151-4333
Torque Handle

991514333
C30940: RNCC: 3 | RNVC: 2
QSN40: RNCC: 5 | RNVC: 2
FP184: RNCC: 6 | RNVC: 9

27 Oct 2009

5120-99-910-6235
Open End Wrench

999106235
BS192-TABLE 3 1/4X5/16BS: RNCC: 4 | RNVC: 1
BS192: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-800-4411
Adaptor

998004411
LST550-5: RNCC: 3 | RNVC: 2
LRT-54-001: RNCC: 5 | RNVC: 2
LST550-5/1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-255-9293
Ball Joint Sup Tool

992559293
70-99-971: RNCC: 3 | RNVC: 2
034HR-002: RNCC: 6 | RNVC: 9

3 Dec 2003

5120-99-872-1957
Hexagon Bit

998721957
26271: RNCC: 3 | RNVC: 2
YMH40/SC: RNCC: 5 | RNVC: 2

18 Aug 2005

5120-99-684-4235
Socket Head Screw Key Set

996844235
NO PRIMARY REF 99-684-4235: RNCC: 3 | RNVC: 2
451-8937: RNCC: 5 | RNVC: 2

2 Oct 2006

5120-99-676-6618
Probe

996766618
NO PRIMARY REF 99-676-6618: RNCC: 3 | RNVC: 2
MODOK 06: RNCC: 5 | RNVC: 2

6 Jun 2012

5120-99-460-9723
Open End Wrench

994609723
UCW6401-32: RNCC: 3 | RNVC: 2
161323: RNCC: 6 | RNVC: 9
CJ323: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-805-6032
Jack Packing Timber

998056032
1568588: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-99-780-4462
Burner Ri Extractor

997804462
ASPLY 10636: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-802-5191
Spanner Wrench

998025191
FV 453904: RNCC: 3 | RNVC: 2
CK2938: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-799-4005
Driftpin

997994005
787211283: RNCC: 3 | RNVC: 2
FL991JZ0164: RNCC: 6 | RNVC: 9

4 Nov 1999

5120-99-444-9552
Screwdriver

994449552
W10VCWSB339: RNCC: 3 | RNVC: 2
B339: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-224-1466

5120-99-132-0123

5120-99-223-1583

5120-99-459-1788
Sprayer Locking Key

994591788
NO PRIMARY REF 99-459-1788: RNCC: 3 | RNVC: 2
S25-169: RNCC: 5 | RNVC: 2
0284-26: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-236-6068
Spanner Wrench

992366068
1698-30-154: RNCC: 3 | RNVC: 2

3 Apr 2012

5120-99-467-4381
Switch Resetti Tool

994674381
ST1657: RNCC: 3 | RNVC: 2
27Q12407: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-724-6537
Coupling Ri Spanner

997246537
POG000478: RNCC: 3 | RNVC: 2

16 Nov 2006

5120-99-255-8792
Socket Wrench Socket

992558792
MBEU58628: RNCC: 1 | RNVC: 2
FS221: RNCC: 3 | RNVC: 2
58628: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-467-9240

5120-99-947-5220

5120-99-108-9833
Preforming Adaptor

991089833
PE 50030: RNCC: 3 | RNVC: 2
T.77835: RNCC: 5 | RNVC: 2
64DE52: RNCC: 6 | RNVC: 9
64DE52: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-201-7823
Spanner Wrench

992017823
FV 565491: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-896-0083
Limiter

998960083
26835088: RNCC: 3 | RNVC: 2

12 Aug 1999

5120-99-760-6602
Torque Wrench Adapter

997606602
PM3407-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-605-8213
Ratchet Wrench

996058213
H325-944778: RNCC: 3 | RNVC: 2
NO5118INAFSQUARE FEMALE: RNCC: 5 | RNVC: 2
H325-944778: RNCC: 6 | RNVC: 9
LE462D3: RNCC: 6 | RNVC: 9
LE463B1: RNCC: 6 | RNVC: 9
N001-944778: RNCC: 6 | RNVC: 9
N001-944778: RNCC: 6 | RNVC: 9

9 May 1996

5120-99-124-2150
Fixed Open End Wrench Set

991242150
2488: RNCC: 3 | RNVC: 2
851762: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-764-2902
Torque Wrench Adapter

997642902
T6486-2.: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-5585
Torque Wrench

991385585
76-47S: RNCC: 3 | RNVC: 2
67S60003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-866-2488
Socket Head Screw Key

998662488
10-5824: RNCC: 3 | RNVC: 2
105824: RNCC: 5 | RNVC: 2
105824B: RNCC: 5 | RNVC: 2

28 Nov 2003

5120-99-466-4832
Ferrule Assemb Tool

994664832
1546T000: RNCC: 3 | RNVC: 2
6D3729: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-456-0495
Bearing And Bushing Inserter And Remover

994560495
A0101201: RNCC: 3 | RNVC: 2
27A3820: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-762-6884
Socket Wrench Socket

997626884
PE50499: RNCC: 3 | RNVC: 2
T 86932: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-523-9802
Mechanical Puller

995239802
PB2113: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-607-3851
Mechanical Puller

996073851
HU16332: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-198-6946
Hand Contact Burnisher

991986946
P1-300GRA1N: RNCC: 3 | RNVC: 2
73-4365A: RNCC: 5 | RNVC: 2
1H140: RNCC: 6 | RNVC: 9
P1B: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-632-6035
Spanner Wrench

996326035
EH9242: RNCC: 3 | RNVC: 2
9242: RNCC: 5 | RNVC: 2
27Y11162: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-406-3737
Gauge

5120-99-404-8160
Face Wrench Socket

5120-99-418-9646

5120-99-062-6107
Seal Inserter

990626107
4A41-W8-018: RNCC: 3 | RNVC: 2
4A41W8-018: RNCC: 5 | RNVC: 2

6 Jan 1995

5120-99-805-8582
Drive Pin Punch

998058582
FV 525189: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-370-8335

5120-99-617-1929
Mechanical Puller

996171929
HU19030-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-000-5259
Adjustable Wrench

990005259
T-30071: RNCC: 3 | RNVC: 2
T-30071: RNCC: 5 | RNVC: 2

20 Jan 2009

5120-99-136-1891
Spanner Wrench

991361891
38294: RNCC: 3 | RNVC: 2
30714: RNCC: 5 | RNVC: 2
106-202216: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-9565
Socket Wrench Adapter

991399565
SC450: RNCC: 3 | RNVC: 2
SC450: RNCC: 5 | RNVC: 2
1L677: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-521-8817
Crimping Tool Stop

995218817
15500-20-29: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-300-8394
Mechanical Puller

993008394
S3S18385000: RNCC: 3 | RNVC: 2

1 Oct 1993

5120-99-257-1487
Spanner Wrench

992571487
001285090: RNCC: 3 | RNVC: 1
SSK/Y/581/00/0106/102: RNCC: 5 | RNVC: 1
Y/581/00/0106/000 PART 102: RNCC: 5 | RNVC: 1
Y/581/00/0106/102: RNCC: 5 | RNVC: 1
Y/581/00/0106/000/102: RNCC: 5 | RNVC: 1
SSK/Y/581/00/0106/000 PART 102: RNCC: 5 | RNVC: 2
SSK/Y/581/00/0106/000/102: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-427-7785
Open End Wrench

994277785
DIN895-10X11: RNCC: 2 | RNVC: 2
D031100010: RNCC: 5 | RNVC: 2
D00895.007.9: RNCC: 5 | RNVC: 2
D031100010: RNCC: 5 | RNVC: 2
D00895.007.9: RNCC: 5 | RNVC: 2

15 Sep 1994

5120-99-577-5760
Clamp C

995775760
S21-65095SPT: RNCC: 3 | RNVC: 2
S21/65095/SPT: RNCC: 5 | RNVC: 2

4 Apr 1990

5120-99-710-7045
Socket Wrench Handle

997107045
T41: RNCC: 3 | RNVC: 2
M70: RNCC: 3 | RNVC: 2
BS4006-TABLE 26 9/32A/F: RNCC: 4 | RNVC: 1
AK.9: RNCC: 5 | RNVC: 2
FB207248: RNCC: 5 | RNVC: 2
PE25256: RNCC: 5 | RNVC: 2
85-101-2453: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-737-2380
Adjuster

5120-99-749-1148
Adjustable Flat Gla

5120-99-437-5894
Torque Bar

5120-99-052-0646
Hand Hydraulic Jack

5120-99-561-8652

5120-99-051-3522

5120-99-970-5646
Lamp Extractor

999705646
15PA32: RNCC: 3 | RNVC: 2
R30-0214-50: RNCC: 5 | RNVC: 2
16-42782: RNCC: 5 | RNVC: 2
15PA32: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-869-3601
Nut Spinner Se Case

998693601
5490-06-CASE: RNCC: 3 | RNVC: 2

15 Aug 1995

5120-99-776-2880
Screwdriver Bit

997762880
029760: RNCC: 3 | RNVC: 2
FP184: RNCC: 6 | RNVC: 9

26 Oct 2009

5120-99-782-1124
Box Wrench

997821124
6RB6071: RNCC: 3 | RNVC: 2
H21697: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-419-5203

5120-99-194-3115

5120-99-730-7845
Open End Wrench

997307845
A 321: RNCC: 3 | RNVC: 2
3AP4926: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-135-3224
Heel Bar

991353224
T-31496: RNCC: 3 | RNVC: 2
T-31496: RNCC: 5 | RNVC: 2

20 Jan 2009

5120-99-020-7249
Combination Box And Open End Wrench

990207249
RJM30: RNCC: 3 | RNVC: 2
BS7586-FORM A 30MM: RNCC: 4 | RNVC: 1
H24662: RNCC: 5 | RNVC: 2
436-9375: RNCC: 5 | RNVC: 2
436-9375: RNCC: 5 | RNVC: 2

19 Jul 1994

5120-99-635-9310
Electrical P Driver

996359310
AVMR0089: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-796-8371
Removal And Replace

5120-99-731-2179
Lifting Bracket

997312179
FV2090071: RNCC: 3 | RNVC: 2
AT61125: RNCC: 5 | RNVC: 2

18 Jun 1986

5120-99-812-9101

5120-99-749-1152
Spanner Wrench

5120-99-973-7607
Wire Brush

999737607
9578A: RNCC: 3 | RNVC: 2

15 Sep 2001

5120-99-952-1907

5120-99-343-1822
Flat Tip Screwdriver

993431822
NO PRIMARY REF 99-343-1822: RNCC: 3 | RNVC: 2
KEN-572-5440K: RNCC: 5 | RNVC: 2
KEN-572-5440K: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-769-3566
Spanner Wrench

997693566
T10014-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-812-7709
Eleva Alignment Jig

998127709
NO PRIMARY REF 99-812-7709: RNCC: 3 | RNVC: 2
FV131845: RNCC: 5 | RNVC: 2
LV4FV131845: RNCC: 6 | RNVC: 9

4 Apr 1991

5120-99-743-9540
Screw Thread Insert Inserter

997439540
ST1281: RNCC: 3 | RNVC: 2
H23096: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-725-8787
Socket Spann Socket

997258787
9000D174: RNCC: 3 | RNVC: 2
AHF9000D174: RNCC: 5 | RNVC: 2

19 Sep 1990

5120-99-320-1215
Drift

993201215
999 2216: RNCC: 3 | RNVC: 2
FH980420139: RNCC: 6 | RNVC: 9

26 Jun 1998

5120-99-051-2172
Injector Seal Tool

990512172
PC24197: RNCC: 3 | RNVC: 2
PC24197: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-4643
B Riveter Nosepiece

991204643
H5937: RNCC: 2 | RNVC: 2
13179D: RNCC: 3 | RNVC: 2
13033C6: RNCC: 6 | RNVC: 9
F1FA18324: RNCC: 6 | RNVC: 9
1C7486: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-051-6727
Ratchet Wrench

990516727
4: RNCC: 3 | RNVC: 1
OD.22187: RNCC: 5 | RNVC: 2

9 Jun 1993

5120-99-456-0734
W Bearing Extractor

994560734
A0103017: RNCC: 3 | RNVC: 2
27A4479: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-580-5392
Screw Thread Insert Inserter

995805392
A29-6: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-244-6316
Installer Adaptor

992446316
RW550-1/1: RNCC: 3 | RNVC: 2

2 Nov 1993

5120-99-598-6414
Socket Wrench Socket

995986414
BELZER6700DM17MM: RNCC: 3 | RNVC: 2

4 Jul 2004

5120-99-460-3950
Inserter

994603950
T86724: RNCC: 3 | RNVC: 2
64DE180: RNCC: 6 | RNVC: 9
64DE180: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-406-2518
Turnlock Fastener Clinching Punch

994062518
A5TOOL2: RNCC: 3 | RNVC: 2
28FP415: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-252-4813
Screwdriver Bit

992524813
49-B-TX-10: RNCC: 3 | RNVC: 2
ET541699/1D: RNCC: 5 | RNVC: 2
49-B-TX-10: RNCC: 6 | RNVC: 9
1C/8649: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-735-8833
Torque Wrench Adapter

997358833
P-891462-403: RNCC: 3 | RNVC: 2
P891462-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-224-9937

5120-99-460-0101

5120-99-463-6077
Hinge Reaction Tool

5120-99-521-7085

5120-99-460-3160

5120-99-629-0329
Face Spanner Wrench Socket

996290329
WG0188-7003-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-111-1024
Tube Spanner Tool

991111024
DR3180-0020-SA: RNCC: 3 | RNVC: 2

16 Apr 1993

5120-99-811-6231
Splined Wrench

998116231
453 7785-075: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-428-5126
Tool

994285126
CSDE/CHK/GSS/189: RNCC: 3 | RNVC: 2

22 Mar 1996

5120-99-790-0244
Rotating Members Aligning Tool

997900244
FV2305141: RNCC: 3 | RNVC: 2

31 Mar 2009

5120-99-781-9843
Torque Wrench

997819843
H22371: RNCC: 1 | RNVC: 2
99001: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-793-4283
Mechanical Puller

997934283
21200141: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-7742
Socket Spanner Atta

997827742
IN30: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-810-4600
Spanner Wrench

998104600
J13051: RNCC: 3 | RNVC: 2
LV1ENVJ13051: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-808-9937
Shouldered Plate

998089937
8B7561: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-2870
Socket Wrench

997822870
SPA411: RNCC: 3 | RNVC: 2
H02316: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-810-2207
Leveling-Support Jack

998102207
FV490985: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-467-4845
Spanner Wrench

994674845
Z18147-5: RNCC: 3 | RNVC: 2
5X1490: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-786-1304
Setting Gauge

997861304
V6913/1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-1791
Installation Tool A

997691791
PD87639: RNCC: 3 | RNVC: 2

18 Feb 1984

5120-99-732-6550
Ratchet Wrench

997326550
6: RNCC: 3 | RNVC: 1
LEYTOOL 6: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-216-0586
C Clamp

992160586
A08591: RNCC: 3 | RNVC: 2
A08591: RNCC: 3 | RNVC: 9

28 Sep 2011

5120-99-613-5433
Socket Wrench Socket

996135433
550094: RNCC: 3 | RNVC: 2

11 Nov 2010

5120-99-968-3379
Screwdriver

999683379
NO PRIMARY REF 99-968-3379: RNCC: 3 | RNVC: 2
SA330-GSS35: RNCC: 5 | RNVC: 2
26MM95281: RNCC: 6 | RNVC: 9

26 Sep 2002

5120-99-437-5906
Spanner Wrench

994375906
PAT13257: RNCC: 3 | RNVC: 2
0277-13257: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-108-9865
Open End Wrench

991089865
PE50017: RNCC: 3 | RNVC: 2
T77799: RNCC: 5 | RNVC: 2
64DE33: RNCC: 6 | RNVC: 9
64DE33: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-160-4788
Seal Inserter

991604788
AE8739: RNCC: 3 | RNVC: 2

29 Nov 2011

5120-99-429-5476
Spanner Wrench

994295476
TE2777: RNCC: 3 | RNVC: 2
UWS3B1: RNCC: 6 | RNVC: 9

4 Jan 2007

5120-99-116-8676

5120-99-643-6110
Spanner Wrench

996436110
839087: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-712-6168
Open End Wrench

997126168
439335: RNCC: 3 | RNVC: 2
P39335: RNCC: 5 | RNVC: 2
R439335: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-9224
Bli Riveter Mandrel

991209224
7150-6003: RNCC: 3 | RNVC: 2
1171: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-254-1309
Polishing Tool

992541309
927-100-2029: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-453-7317

5120-99-453-7364
Tool

5120-99-813-1934
Torque Wrench Adapter

998131934
6605039: RNCC: 3 | RNVC: 2
FRS639835: RNCC: 5 | RNVC: 2

13 Apr 2010

5120-99-122-9972
Box Wrench

991229972
X1D2022: RNCC: 3 | RNVC: 2
X1D2022: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-257-9192
Spanner Wrench

992579192
3172T000: RNCC: 3 | RNVC: 2

28 Jun 1995

5120-99-133-4130
Screwdriver Bit

991334130
KT.17A: RNCC: 3 | RNVC: 2

11 Mar 2005

5120-99-421-3852
Pressing Tool

994213852
999 8260: RNCC: 3 | RNVC: 2
FH980420070: RNCC: 6 | RNVC: 9

22 Jun 1998

5120-99-639-7444
Socket H Wrench Key

996397444
NAX138: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-250-1577
Spanner

992501577
NO PRIMARY REF 99-250-1577: RNCC: 3 | RNVC: 2
K10707: RNCC: 5 | RNVC: 2
64VV-989: RNCC: 6 | RNVC: 9

24 Nov 2004

5120-99-722-2843
Solid Center Punch

997222843
PM3355-403: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-497-2573
Special Key

994972573
NO PRIMARY REF 99-497-2573: RNCC: 3 | RNVC: 2
945522: RNCC: 5 | RNVC: 2
945522: RNCC: 5 | RNVC: 9

29 Jan 2010

5120-99-425-9877
Pin Spanner Adaptor

994259877
AL118872: RNCC: 3 | RNVC: 2

29 Aug 2013

5120-99-735-7979
Open End Wrench

997357979
OPA 364: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-154-3149
Wheel Brace

991543149
33385: RNCC: 3 | RNVC: 2

29 Jun 2010

5120-99-007-9933
Clutch Alignme Plug

990079933
BP26838: RNCC: 3 | RNVC: 2
118264ST: RNCC: 6 | RNVC: 9

5 Feb 1990

5120-99-731-2158
Dowe Insertion Tool

997312158
FV2077333: RNCC: 3 | RNVC: 2
AT60032: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-761-5939
Outer Guide

997615939
BP27396: RNCC: 3 | RNVC: 2
114829ST: RNCC: 5 | RNVC: 2
FV1048077: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-607-5188
Face Spanner Wrench Socket

996075188
PE 26103: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-830-9441
Drill Bush

998309441
V3682-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-763-7203
Converter S Adaptor

997637203
1X56 137 382: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-606-5661
Spanner Wrench

996065661
PE3129: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-371-0816
Camshaf Counterhold

993710816
999 8270: RNCC: 3 | RNVC: 2
FH980420078: RNCC: 6 | RNVC: 9

22 Jun 1998

5120-99-577-4314
Craftsman's Tweezers Set

995774314
1306402: RNCC: 3 | RNVC: 2
D00349: RNCC: 5 | RNVC: 2

29 Apr 2010

5120-99-466-5486
Cont Insertion Tool

994665486
558-1-00746: RNCC: 3 | RNVC: 2
3BK507830-2: RNCC: 5 | RNVC: 2
1H672: RNCC: 6 | RNVC: 9
DAK-16: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-953-4242
Box Wrench

999534242
T117: RNCC: 3 | RNVC: 2
PE4853: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-442-0634
Release Lever Rod

994420634
NO PRIMARY REF 99-442-0634: RNCC: 3 | RNVC: 2
0E61803: RNCC: 5 | RNVC: 2
69242: RNCC: 5 | RNVC: 2
4G6048: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-499-7984
Mechanical Puller

994997984
140-461088: RNCC: 3 | RNVC: 2
140DG461088: RNCC: 5 | RNVC: 9
Y140DG461088: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-229-4248
Strap Wre Extension

992294248
B12930: RNCC: 3 | RNVC: 2
992G2-0054: RNCC: 6 | RNVC: 9

7 Dec 1999

5120-99-455-9708
Jaw Cable Grip

994559708
KT-200-632: RNCC: 3 | RNVC: 2

4 Mar 2011

5120-99-213-2186
Hand Hammer

992132186
NO PRIMARY REF 99-213-2186: RNCC: 3 | RNVC: 2
FA0044: RNCC: 5 | RNVC: 2

3 Sep 2008

5120-99-803-0154
Rivet Extractor

998030154
311006: RNCC: 3 | RNVC: 2
UW214A3: RNCC: 6 | RNVC: 9
LV6MT2-2217: RNCC: 6 | RNVC: 9
88712-705-590: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-552-6769
Bearing And Bushing Inserter

995526769
EA6305G574-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-138-6843
Combination Box And Open End Wrench

991386843
RJM16: RNCC: 3 | RNVC: 2
574-056: RNCC: 5 | RNVC: 2
RJM16: RNCC: 6 | RNVC: 9
1C1386843: RNCC: 6 | RNVC: 9
99-551-3107: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-970-7373
Flat Tip Screwdriver

999707373
417-10: RNCC: 3 | RNVC: 2
542-267: RNCC: 6 | RNVC: 9
851750: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-435-6557
Cylinde Valve Key

994356557
D7723: RNCC: 3 | RNVC: 2
D7723: RNCC: 5 | RNVC: 2
D7723: RNCC: 5 | RNVC: 2
UW211E2: RNCC: 6 | RNVC: 9

16 Aug 1994

5120-99-808-2426
Socket Wrench

998082426
FV679755: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-776-7792
Spanner Wrench

997767792
460009582D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-776-9799
Spanner Wrench

997769799
42133S: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-812-8773
Spanner Wrench

998128773
DRT67879: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-99-628-8939

5120-99-607-6298

5120-99-628-8883
Spanner Wrench

5120-99-150-6686
Spanner Wrench

991506686
14-88-2017: RNCC: 3 | RNVC: 2
SR14-88-2017: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-624-9526
Scriber Assembly

996249526
NO PRIMARY REF 99-624-9526: RNCC: 3 | RNVC: 2
078736: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-819-1784
Driftpin

998191784
FV719631-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-969-1610
Solder Set

999691610
ALLGAS 3.5654: RNCC: 3 | RNVC: 2

11 Dec 2000

5120-99-285-3683
Socket Ratchet Head

992853683
A1041001A: RNCC: 3 | RNVC: 2

26 Apr 2001

5120-99-877-8307

5120-99-965-6395
Offset Screwdriver

5120-99-963-1678

5120-99-913-0842

5120-99-459-3284

5120-99-424-9957
Adjuster

994249957
NO PRIMARY REF 99-424-9957: RNCC: 3 | RNVC: 2
4268A: RNCC: 5 | RNVC: 2
88411-400-290: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-760-6723
Socket Head Screw Key

997606723
3613-A13-405: RNCC: 3 | RNVC: 2
3613A13-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-433-4637
Open End Wrench

994334637
50: RNCC: 3 | RNVC: 2
50: RNCC: 5 | RNVC: 1
99-0080: RNCC: 5 | RNVC: 2
0277-12360: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-168-6007
Socket Head Screw Key

991686007
11/454/19/10/1058: RNCC: 3 | RNVC: 2
WE111B2: RNCC: 6 | RNVC: 9

27 Nov 1998

5120-99-122-7605
Screw Thread Insert Inserter

991227605
535-14: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-558-8333
Open End Wrench

995588333
95406 ITEM 14: RNCC: 3 | RNVC: 2
95406-14: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-821-0903
Gearwheel Puller

998210903
1P2320: RNCC: 3 | RNVC: 2
1P-2320: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-361-7533
Socket Wrench Socket

993617533
EHM13: RNCC: 3 | RNVC: 2
BS4006: RNCC: 4 | RNVC: 1

25 Aug 1995

5120-99-465-8642
Wrench

994658642
BN6980: RNCC: 3 | RNVC: 2
64BB1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-625-8197
Mechanical Puller

996258197
NT5727: RNCC: 3 | RNVC: 2
5W8569: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-244-7106
Adaptor

992447106
RE17FE82 051: RNCC: 3 | RNVC: 2

10 Feb 1995

5120-99-701-8284
Screw Thread Insert Inserter

997018284
9865106: RNCC: 3 | RNVC: 2
H23099: RNCC: 5 | RNVC: 2

28 Sep 1994

5120-99-588-0124

5120-99-135-8402
Torque Wren Adapter

5120-99-642-8108
Inserter Pin

996428108
PE50260: RNCC: 3 | RNVC: 2
T86650: RNCC: 5 | RNVC: 2
64DE152: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-887-4050
Bullet

998874050
WG1388-3288-101: RNCC: 3 | RNVC: 2
WG1388-3288: RNCC: 5 | RNVC: 1
XP98PA01485: RNCC: 6 | RNVC: 9

23 Jan 1998

5120-99-924-5817
Socket Head Screw Key

999245817
WL11: RNCC: 3 | RNVC: 2
85-25-19-10-1725: RNCC: 5 | RNVC: 2
121-414: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-272-2886
Spanner Wrench Set

992722886
T21212: RNCC: 3 | RNVC: 2

11 Jul 2007

5120-99-712-7865
Open End Wrench

997127865
BA50140: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-147-2774
Unitool

991472774
54999: RNCC: 3 | RNVC: 2
549996: RNCC: 5 | RNVC: 2
961630007: RNCC: 6 | RNVC: 9

1 May 1996

5120-99-363-2060
Socket Wrench

993632060
88PB-17035-AB: RNCC: 3 | RNVC: 2
6200100: RNCC: 5 | RNVC: 2

23 Jul 1991

5120-99-760-0957
Bearing And Bushing Driver

997600957
T7311-407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-460-0783
Spanner Wrench

994600783
AE2535: RNCC: 3 | RNVC: 2
27M13547: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-133-3537
Special Spanner

991333537
2772T000: RNCC: 3 | RNVC: 2

4 Jun 1999

5120-99-108-9862
Lapping Mandrel

991089862
TL3558: RNCC: 3 | RNVC: 2
TL3558: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-536-9656
Open End Wrench

995369656
TZ.499 220: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-488-8509
Handling Tool Arm

994888509
GRIPSTICK01: RNCC: 3 | RNVC: 2

9 Jun 2010

5120-99-701-4889
Electrical Contact Inserter And Remover

997014889
13027/1: RNCC: 3 | RNVC: 2

21 Jan 2010

5120-99-204-5145
Combination Box And Open End Wrench

992045145
81-153: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-440-4800
Socket Head Scr Key

5120-99-425-7394

5120-99-438-6122

5120-99-144-6027
Assembly O R Sleeve

991446027
460002094: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-372-8711
Hexagon Driver

993728711
S15-85-0001-99/11: RNCC: 3 | RNVC: 2

3 Feb 1993

5120-99-551-6583
Torque Wrench

995516583
J.250A: RNCC: 3 | RNVC: 2

7 Jan 2009

5120-99-417-3321

5120-99-627-7147

5120-99-443-9102

5120-99-837-6976
Valve Guide Adaptor

998376976
CT6073-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-831-8113
Distance Piece

998318113
V4409-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-454-1698
Seal Insertion Tool

994541698
KB132K1122-000: RNCC: 3 | RNVC: 2

25 Mar 2002

5120-99-137-2930
Screwdriver Bit

991372930
TWB6: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
TWB6: RNCC: 5 | RNVC: 2
TWB6: RNCC: 6 | RNVC: 9
56J90011: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-9037
Key Spanner

994119037
NO PRIMARY REF 99-411-9037: RNCC: 3 | RNVC: 2
ST1857: RNCC: 5 | RNVC: 9
27Q13486: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-359-3850
Ratchet Wrench

993593850
RBB1921-19X21AF: RNCC: 3 | RNVC: 2
RBB1921-19X21AF: RNCC: 5 | RNVC: 9

22 Sep 2001

5120-99-795-5054
Hand Hydraulic Jack

997955054
ME-30-2325M: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-131-8159
Bush Guide

991318159
AE8408GSEREF9: RNCC: 3 | RNVC: 2

12 Nov 2003

5120-99-838-1579
Socket Wrench

5120-99-838-6497
Soleno Toolassembly

5120-99-802-5324
Wrench Spanne Guide

998025324
FV546158: RNCC: 3 | RNVC: 2

24 May 1977

5120-99-802-2478
Mechanical Puller

998022478
CK2666: RNCC: 3 | RNVC: 2
T649: RNCC: 3 | RNVC: 2
FV453184: RNCC: 3 | RNVC: 2

5 Sep 1979

5120-99-801-8765
Spanner Wrench

998018765
FV 590197: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-802-2472
Pullerxoil Restrict

998022472
CK2660: RNCC: 3 | RNVC: 2
T643: RNCC: 3 | RNVC: 2
FV453178: RNCC: 3 | RNVC: 2

5 Sep 1979

5120-99-657-2481
Bearing And Bushing Driver

996572481
460009427C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-731-2142
Seal Inserter

997312142
FV2077334: RNCC: 3 | RNVC: 2
AT60033: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-731-2163
Swaging Tool

997312163
FV2077340: RNCC: 3 | RNVC: 2
AT60039: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-731-2172
Alignment And Inser

997312172
FV2077392: RNCC: 3 | RNVC: 2
AT60095: RNCC: 5 | RNVC: 2

15 Apr 1986

5120-99-731-2153
Dummy Pin

997312153
FV2077328: RNCC: 3 | RNVC: 2
AT60027: RNCC: 5 | RNVC: 2

5 Apr 1986

5120-99-125-5535

5120-99-132-0125

5120-99-654-3029
Mechanical Puller

996543029
P-890530-405: RNCC: 3 | RNVC: 2
P890530-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-654-3012
Mechanical Puller

996543012
P-890238-407: RNCC: 3 | RNVC: 2
P890238-407: RNCC: 5 | RNVC: 2

10 May 1980

5120-99-136-8281
Spanner Wrench

991368281
BW4609-16: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-322-9447
Breaker Bar And Rat

993229447
NO PRIMARY REF 99-322-9447: RNCC: 3 | RNVC: 2
L712TK: RNCC: 5 | RNVC: 2
C576-70T279018: RNCC: 6 | RNVC: 9

8 Jun 2002

5120-99-226-0594
Screwdriver Bit

992260594
029840: RNCC: 3 | RNVC: 2
FP184: RNCC: 6 | RNVC: 9

26 Oct 2009

5120-99-467-2836

5120-99-924-2862
Stuffing Box And Pump Packing Extractor

999242862
PA.10006X: RNCC: 3 | RNVC: 2
0275-275005: RNCC: 6 | RNVC: 9
116388-1: RNCC: 6 | RNVC: 9
0275-924-2862: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6000
Open End Wrench

999106000
BS192-TABLE 2 3/8X7/16A/F: RNCC: 4 | RNVC: 1
1C6330: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-192-9735
Flat Tip Screwdriver

991929735
417-8: RNCC: 3 | RNVC: 2
BKB504559: RNCC: 5 | RNVC: 2
1C6917: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-127-7456
Socket Wrench Socket

991277456
AD628AF3-8: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-334-5364
Alignment Tool

993345364
EA5305G515-041: RNCC: 3 | RNVC: 2
1MEVGT8: RNCC: 6 | RNVC: 9

18 Jul 2004

5120-99-203-6918
Socket Wrench Socket

992036918
J5-16: RNCC: 3 | RNVC: 2
J5-16: RNCC: 5 | RNVC: 2
ET00001-04306: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-536-1548
Lifting Clamp Assem

995361548
YJ70649B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-940-6675
Socket Wrench Socket

999406675
HB1625: RNCC: 3 | RNVC: 9

5 Jul 2012

5120-99-834-1182
Seal Remover

998341182
M17340: RNCC: 3 | RNVC: 2

11 Dec 2004

5120-99-558-6375
Socket Wrench Handle Bar

995586375
SU1316-15: RNCC: 3 | RNVC: 2
004471510: RNCC: 5 | RNVC: 1
SU.90565: RNCC: 5 | RNVC: 1
MV/00361/CN/968: RNCC: 5 | RNVC: 1
MV/00361/CN/968 PART 15: RNCC: 5 | RNVC: 2
004471510 PART 15: RNCC: 5 | RNVC: 2
12-74576: RNCC: 5 | RNVC: 2
SU.90565 PART 15: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-135-7783
Inspection Mirror

991357783
1192K5M: RNCC: 3 | RNVC: 2
1B5902: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-739-5310
Spanner Wrench

997395310
J82805: RNCC: 3 | RNVC: 2

22 Mar 2011

5120-99-139-8002

5120-99-135-9020

5120-99-700-8172
Assembly Tool

997008172
HN0846: RNCC: 3 | RNVC: 2
WE/114J1: RNCC: 6 | RNVC: 9

4 Feb 2002

5120-99-120-7301
Inserted Hammer Face

991207301
75/616/WF: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 31: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
H5999: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-856-8540
Leveling-Support Jack

998568540
TW419-110-07-00: RNCC: 3 | RNVC: 2
102JU-017: RNCC: 6 | RNVC: 9
102JU-013: RNCC: 6 | RNVC: 9

3 Sep 2010

5120-99-127-8993
Insertion And Extra

991278993
M15570-12: RNCC: 3 | RNVC: 2
H21742: RNCC: 5 | RNVC: 2
1H549: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-433-4398
Half-Plate

994334398
EA6705G563-119: RNCC: 3 | RNVC: 2

8 Nov 2008

5120-99-993-5177
Hydraulic Jack Handle

999935177
OE-B-11331: RNCC: 3 | RNVC: 2
0921S-004: RNCC: 6 | RNVC: 9

5 May 2010

5120-99-549-0843
Die Stock

995490843
UGOL12-1-5/16: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-820-4013
Hand Hammer

998204013
NL148641: RNCC: 3 | RNVC: 2
311-042523: RNCC: 5 | RNVC: 2
602-741: RNCC: 5 | RNVC: 2
RS015-40SA: RNCC: 5 | RNVC: 2
NSA038-330: RNCC: 5 | RNVC: 2
SPCISR/10/2/43/5/1: RNCC: 6 | RNVC: 9
060W5-0073: RNCC: 6 | RNVC: 9

31 Jul 2003

5120-99-423-8253
Cap Pin Spanner

994238253
NO PRIMARY REF 99-423-8253: RNCC: 3 | RNVC: 2
9081-3: RNCC: 5 | RNVC: 2
558770: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-910-6178
Open End Wrench

999106178
DEF STAN 51-11 (PART 1): RNCC: 4 | RNVC: 1
BS1842-TABLE 1 1 X 3BA: RNCC: 4 | RNVC: 1
H20250: RNCC: 5 | RNVC: 2
5J2836: RNCC: 5 | RNVC: 2
TABLE I(C) 1 X 3BA: RNCC: 6 | RNVC: 9
851754: RNCC: 6 | RNVC: 9
99-449-0248: RNCC: 6 | RNVC: 9
TABLE 1. 1 BA X 3 BA: RNCC: 6 | RNVC: 9
FA17179: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-580-5402
Screw Thread Insert Inserter

995805402
A29-4: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-465-8813
Dies

994658813
19117: RNCC: 3 | RNVC: 2
1H266: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-143-3352
Setting Tool

991433352
A43279: RNCC: 3 | RNVC: 2
A43279: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-184-6142
Torque Screwdriver

991846142
015500: RNCC: 3 | RNVC: 1
STD SD: RNCC: 5 | RNVC: 1

8 Feb 2007

5120-99-512-1428
Spanner Wrench

995121428
110079-16011: RNCC: 3 | RNVC: 2
26VC-96075: RNCC: 6 | RNVC: 9

22 Feb 2002

5120-99-219-8060
Seal Inserter

992198060
074.095.00: RNCC: 3 | RNVC: 2

13 May 1998

5120-99-659-6938

5120-99-459-0754
Torque Wrench Adapter

994590754
GT14215: RNCC: 3 | RNVC: 2
GT14215: RNCC: 5 | RNVC: 9
64VV3120: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5814
Vise Jaw Caps

999105814
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H5520: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-171-9128
Shaft Holder

991719128
M12974: RNCC: 3 | RNVC: 2

22 Sep 2010

5120-99-614-7522
Torque Wrench Adapter

996147522
TL5600: RNCC: 3 | RNVC: 2

10 Feb 1995

5120-99-104-7833
Socket Head Screw Key

991047833
JA2374: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-606-4895
Oil Filte Extractor

996064895
HWU1717: RNCC: 3 | RNVC: 2

14 Aug 1979

5120-99-977-7469
Turret

999777469
620168: RNCC: 3 | RNVC: 2
620168: RNCC: 5 | RNVC: 2
1H1110: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-202-7687
Special Screwdriver

5120-99-420-4147

5120-99-738-0384
Pipe Wrench

997380384
AK5113: RNCC: 3 | RNVC: 2
CV134430: RNCC: 5 | RNVC: 2
AK5113: RNCC: 5 | RNVC: 2

13 Apr 2011

5120-99-433-0951
Hand Brush

994330951
331/33690: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-659-7530
Open End Wrench

996597530
460009368C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-659-2180
Mechanical Puller

996592180
460009318B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-737-3862
Drive Pin Punch

997373862
W5747 226A: RNCC: 3 | RNVC: 2
W5747 226A: RNCC: 5 | RNVC: 2

14 Oct 1987

5120-99-463-7441
Open End Wrench

994637441
NO PRIMARY REF 99-463-7441: RNCC: 3 | RNVC: 2
5ET-28166-10: RNCC: 5 | RNVC: 2

15 Jul 2010

5120-99-214-4098
Mechanical Puller

992144098
PD150B: RNCC: 3 | RNVC: 2
PD150A: RNCC: 5 | RNVC: 2
992046967: RNCC: 6 | RNVC: 9
21825052: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-7767

5120-99-127-8036
Torque Wrench

991278036
76-152: RNCC: 3 | RNVC: 2
DEFSTAN 51-11 PART 32: RNCC: 4 | RNVC: 1
1H523: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-149-1893
Socket Head Screw Key

991491893
460004285: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-6593
Machinist's Vise

999106593
DEFSTAN51-11 PART 21: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 2
H20392: RNCC: 5 | RNVC: 2
112: RNCC: 5 | RNVC: 2
1C5592: RNCC: 6 | RNVC: 9
F1FA19513: RNCC: 6 | RNVC: 9
DL9A-H2956: RNCC: 6 | RNVC: 9
H2956: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-395-8946
Wear Down Gauge

993958946
215/60M: RNCC: 3 | RNVC: 2
F215/60M: RNCC: 5 | RNVC: 2

2 Nov 1989

5120-99-288-7574
Flat Tip And Cross Tip Screwdriver Set

992887574
NO PRIMARY REF 99-288-7574: RNCC: 3 | RNVC: 2
480-6846: RNCC: 5 | RNVC: 2

28 Apr 2011

5120-99-585-8523
Oil Filter Wrench

995858523
NO PRIMARY REF 99-585-8523: RNCC: 3 | RNVC: 2
77592: RNCC: 5 | RNVC: 2

9 Jun 2004

5120-99-021-8508
Socket Head Screw Key

990218508
W715340: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-0792
Socket Wrench Handle

991240792
BS4006-TABLE 33 6.30MM: RNCC: 4 | RNVC: 1
1L-1240792: RNCC: 6 | RNVC: 9
D50: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6044
Open End Wrench

999106044
BS192-2A/F: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5260: RNCC: 6 | RNVC: 9
TABLE I(A) 2A/F: RNCC: 6 | RNVC: 9
FA17128: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-013-9200
Spanner Wrench

990139200
CC/B 1231/2: RNCC: 3 | RNVC: 2
DEF STAN 59-35 (PART 1): RNCC: 4 | RNVC: 1
SHELL SIZE 2: RNCC: 6 | RNVC: 9
CCB12312: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-2248
Bearing And Bushing Driver

996592248
460009427D: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-207-8868
Trestle Leg Strut

992078868
GMC75953: RNCC: 3 | RNVC: 2
0EC1384: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-942-6902
Inserter

999426902
TVK: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-454-8941
Forceps

994548941
721389: RNCC: 3 | RNVC: 2
BB: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-747-2644
Allen Key

997472644
7-64: RNCC: 3 | RNVC: 2

18 Jan 2002

5120-99-586-0838
Mandrel

995860838
AE8394GSEREF5: RNCC: 3 | RNVC: 2

27 Jun 2009

5120-99-422-5696

5120-99-974-2368
Sizing Sleeve

999742368
T1762: RNCC: 3 | RNVC: 2
T1762: RNCC: 5 | RNVC: 2

6 Mar 2008

5120-99-507-3269
Flat Tip-Cross Tip Screwdriver

995073269
332/U8024: RNCC: 3 | RNVC: 2

1 Apr 2009

5120-99-525-5578
Spanner Wrench

995255578
85-119-19-10-1004: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-481-9789
Special Purpose Combination Wrench

994819789
IS5885/047: RNCC: 3 | RNVC: 2
CRGS: RNCC: 6 | RNVC: 9

13 Nov 2007

5120-99-146-2924
Sea Installing Tool

991462924
S6170-35408: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-467-5345
Valve Spring Compressor

994675345
CST2824: RNCC: 3 | RNVC: 2
ST2824: RNCC: 5 | RNVC: 2
27Q19151: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-5492
Hotchki Screwdriver

994225492
CIW 760: RNCC: 3 | RNVC: 1
119021: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-177-7403
Socket Head Screw Key

991777403
ESK19: RNCC: 3 | RNVC: 2

12 Jun 2007

5120-99-670-4809
Puller

996704809
999 8269: RNCC: 3 | RNVC: 2
FH980420077: RNCC: 6 | RNVC: 9

22 Jun 1998

5120-99-219-4384
Bihex Socket

992194384
11P461ZS1019/3: RNCC: 3 | RNVC: 2

18 Dec 1997

5120-99-949-2732
Electronic Equipment Alignment Tool

999492732
P26173/S: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-208-3635
Castor Spring

992083635
XSD1115: RNCC: 3 | RNVC: 2
4Q3498: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-351-4480
Hand Hydraulic Jack Kit

993514480
80.861.02608.200: RNCC: 3 | RNVC: 2

18 Apr 2012

5120-99-748-7500
Face Spanner Wrench Socket

997487500
2204T403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-909-5562
Gap Gauge

999095562
2AP61887: RNCC: 3 | RNVC: 2
118245ST: RNCC: 6 | RNVC: 9

8 Mar 1990

5120-99-808-3700
Nozzle Clean Needle

998083700
NO PRIMARY REF 99-808-3700: RNCC: 3 | RNVC: 2
CAV7044-69D: RNCC: 5 | RNVC: 2
7044-69D: RNCC: 5 | RNVC: 2
W7044-69D: RNCC: 5 | RNVC: 2
H526-947212: RNCC: 6 | RNVC: 9
LV6MT12CB7044-69D: RNCC: 6 | RNVC: 9
526-947212: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-0377
Electrical Ejector

991240377
CZ23300: RNCC: 3 | RNVC: 2
1H274: RNCC: 6 | RNVC: 9

27 Jul 1989

5120-99-460-3934
Bearing And Bushing Inserter

994603934
T86589: RNCC: 3 | RNVC: 2
PE50228: RNCC: 5 | RNVC: 2
64DE143: RNCC: 6 | RNVC: 9
64DE143: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-334-8347
Torque Wrench

993348347
ZA50002113: RNCC: 3 | RNVC: 2

14 Mar 2003

5120-99-990-0430
Socket

999900430
EKA20997: RNCC: 3 | RNVC: 2

25 Nov 2008

5120-99-882-3606
Socket Wrench Handle

998823606
M07/73875/00: RNCC: 3 | RNVC: 2

25 Jan 2008

5120-99-626-5785
Open End Wrench

996265785
078547: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-715-9922
Wrench Spanner

997159922
ST38672: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-236-5845
Open End Wrench

992365845
6066770: RNCC: 3 | RNVC: 2
6 19X22: RNCC: 5 | RNVC: 2

6 Nov 2004

5120-99-794-4183
Box Wrench

997944183
CSRS 603-6: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-850-6146
Torque Wrench

998506146
TL117: RNCC: 3 | RNVC: 2

28 Feb 2013

5120-99-419-1454

5120-99-192-9736

5120-99-771-3946

5120-99-700-8888
Tightening Tool

997008888
C1833: RNCC: 3 | RNVC: 2
F300 0T 012 8892: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-536-5965
Box Wrench

995365965
2RB8793: RNCC: 3 | RNVC: 2
0D10740: RNCC: 5 | RNVC: 2
BS3555: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-207-8170
Socket Wrench Handle Bar

992078170
2262: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-820-3861
Recuperator En Tool

998203861
FV792856: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-809-8641
Hand Hydraulic Jack

998098641
1625C: RNCC: 3 | RNVC: 2
116724: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-950-2636
Assembly Rail

999502636
04835042: RNCC: 3 | RNVC: 2

16 Aug 1999

5120-99-405-4202

5120-99-436-0419
Torque Adaptor

994360419
NO PRIMARY REF 99-436-0419: RNCC: 3 | RNVC: 2
NTS9102: RNCC: 5 | RNVC: 2
5UA9357: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-702-0996
Mechanical Puller

997020996
103108: RNCC: 3 | RNVC: 2
WE111A2: RNCC: 6 | RNVC: 9

12 Mar 1996

5120-99-623-7335
Torque Handle

996237335
11137: RNCC: 3 | RNVC: 2
023180: RNCC: 5 | RNVC: 2
300/TH: RNCC: 5 | RNVC: 2
UW214A3: RNCC: 6 | RNVC: 9

13 Aug 1991

5120-99-910-4328
Pinch Bar

999104328
A39798: RNCC: 3 | RNVC: 2
UKSC4576: RNCC: 4 | RNVC: 1
H122: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-874-2001

5120-99-432-4478
Hand Screw Jack

994324478
NO PRIMARY REF 99-432-4478: RNCC: 3 | RNVC: 2
DFC66621: RNCC: 5 | RNVC: 2
88103-101-713: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-7644
Tube Spanner

994547644
NO PRIMARY REF 99-454-7644: RNCC: 3 | RNVC: 2
MDSK858-14: RNCC: 5 | RNVC: 2
720489: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-719-7340
Spanner Wrench

997197340
ST2075-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-423-4596
Socket Wrench

994234596
9028-6: RNCC: 3 | RNVC: 2
558613: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-433-5054
Face Spanner Wrench Socket

994335054
100405-8267-002: RNCC: 3 | RNVC: 2
100405-8267-002: RNCC: 5 | RNVC: 2

30 Nov 2010

5120-99-666-0199
Socket

996660199
999 8514: RNCC: 3 | RNVC: 2
5870401122: RNCC: 5 | RNVC: 2
033AV-002: RNCC: 6 | RNVC: 9

2 Sep 2003

5120-99-734-7375
Expansion Pliers

997347375
16-0987: RNCC: 3 | RNVC: 2
SYSTEM 50: RNCC: 5 | RNVC: 2
1H/1306: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-075-4572
Torque Setting Tool

990754572
03436: RNCC: 3 | RNVC: 2

15 Sep 1992

5120-99-468-4911
Aligning Shaft

994684911
T351784: RNCC: 3 | RNVC: 2
10AG1853: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-667-2854
Mechanical Puller

996672854
TM50170: RNCC: 3 | RNVC: 2

25 Feb 2009

5120-99-401-2840
Clutch Spigot Drag

994012840
NO PRIMARY REF 99-401-2840: RNCC: 3 | RNVC: 2
835: RNCC: 5 | RNVC: 9
16C3167: RNCC: 6 | RNVC: 9

15 Oct 1979

5120-99-483-2374
Square Drive Socket

994832374
6273210: RNCC: 3 | RNVC: 2
051HP-001: RNCC: 6 | RNVC: 9
0517T-004: RNCC: 6 | RNVC: 9

12 Apr 2005

5120-99-380-6869
Hand Hydraulic Jack

993806869
WDK 20 Q: RNCC: 3 | RNVC: 2
040LG-001: RNCC: 6 | RNVC: 9

20 Feb 2004

5120-99-910-6273
Socket Wrench

999106273
BS2558-TABLE 6 6X7MM: RNCC: 4 | RNVC: 1
DEF STAN 51-11 PART 3: RNCC: 4 | RNVC: 1
TABLE I(B) 6X7MM: RNCC: 6 | RNVC: 9
BS2558: RNCC: 6 | RNVC: 9
F1FA17300: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6403
Socket Wrench Socket

999106403
DEF STAN 51-11 PART 4: RNCC: 4 | RNVC: 1
BS4006-TABLE 22 1WHIT: RNCC: 4 | RNVC: 1
11/P461ZS1019/5: RNCC: 5 | RNVC: 2
T.710/9/4: RNCC: 5 | RNVC: 2
1L69: RNCC: 6 | RNVC: 9
TABLE I(E) 1WHIT: RNCC: 6 | RNVC: 9
FA17523: RNCC: 6 | RNVC: 9
5120-99-033-3689: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9
991474127: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-4498
Open End Wrench

991204498
1REFDWGGP261: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-130-1399
Socket Wrench

991301399
UT562: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-423-8212
Socket Wrench

994238212
TD449-4: RNCC: 3 | RNVC: 2
558145: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-780-7043
Removing Tool

5120-99-761-3549

5120-99-560-8226
Spanner Wrench

5120-99-547-0673

5120-99-547-1182
Depth Transducer To

5120-99-721-9371
Location Bung

997219371
460009299-7: RNCC: 3 | RNVC: 2
460009299DETAIL7: RNCC: 6 | RNVC: 9

4 Dec 1985

Load More Results