What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 51 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 51 of 108

5120-99-620-5772
Combination Open End And Spanner Wrench

996205772
BT28183: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-140-5477

5120-99-120-8798

5120-99-702-5509
B Installation Tool

5120-99-613-3230
Hand Earth Boring Auger

996133230
16-T0008/A: RNCC: 3 | RNVC: 2

7 Sep 2007

5120-99-608-9299
Socket Head Screw Key

996089299
SDMM2702.5A: RNCC: 3 | RNVC: 2

28 Nov 2003

5120-99-126-1763
Socket Wrench Socket

991261763
EHM10: RNCC: 3 | RNVC: 2
BS4006: RNCC: 4 | RNVC: 1

25 Aug 1995

5120-99-972-9815
Elec Alignment Tool

999729815
XCA214-325: RNCC: 3 | RNVC: 2
10AG96: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-5724
Breech Mecha Wrench

994225724
NO PRIMARY REF 99-422-5724: RNCC: 3 | RNVC: 2
N0D2107-82DET8: RNCC: 5 | RNVC: 2
121373: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5973
Box Wrench

999105973
2RB93100: RNCC: 3 | RNVC: 2
BS3555-TABLE 2 15/16X1A/F: RNCC: 4 | RNVC: 1
H20903: RNCC: 5 | RNVC: 2
H21900: RNCC: 5 | RNVC: 2
F1FA17066: RNCC: 6 | RNVC: 9
1L85: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-9229
Mechanical Puller

996079229
PE53497: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-2294
Open End Wrench

991242294
312: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-432-1299
Socket Wrench Handle Bar

994321299
RPH2663A: RNCC: 3 | RNVC: 2
E6UN000349: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-577-4288
Mechanical Puller

995774288
MC1269016: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-411-8990
Spanner Wrench

994118990
ST1512: RNCC: 3 | RNVC: 2
27Q13594: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-145-0817

5120-99-145-0828

5120-99-660-2724
Bearing And Bushing Inserter And Remover

996602724
460005592: RNCC: 3 | RNVC: 2
10ZZ211751: RNCC: 6 | RNVC: 9

8 Apr 1992

5120-99-106-0318

5120-99-488-6134
Socket Wrench Set

994886134
B75AMB: RNCC: 3 | RNVC: 2
106-088: RNCC: 5 | RNVC: 2

8 Oct 1999

5120-99-741-6429
Swaging Too Mandrel

997416429
48441-A3ITEM3: RNCC: 3 | RNVC: 2
48441A3DETAIL3: RNCC: 5 | RNVC: 2
48441A3DETA1L3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-735-5077
Open End Wrench

997355077
29703: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-301-4877
Extraction Hook

5120-99-143-6171
Rigging Tool

5120-99-001-9214
Socket Head Screw Key

990019214
061224: RNCC: 3 | RNVC: 2
FV2188224: RNCC: 5 | RNVC: 2

12 Nov 1997

5120-99-519-7869
Precompression Tool

995197869
S1006266: RNCC: 3 | RNVC: 2
730/08/13-22: RNCC: 6 | RNVC: 9

11 Oct 2005

5120-99-153-2299
Socket Wrench Attachment Universal Joint

991532299
CEDC/224/112: RNCC: 3 | RNVC: 2

5 Jul 2012

5120-99-465-4131
Pliers

994654131
1B4576: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-99-417-7532
Spring Tool Forked

994177532
MBEU4360PA: RNCC: 3 | RNVC: 2
BMBEU4360PA: RNCC: 5 | RNVC: 2
15A1359: RNCC: 6 | RNVC: 9

25 Jul 1979

5120-99-471-2199
Shaft Assembly Tool

994712199
NTS14760: RNCC: 3 | RNVC: 2
NTS14760: RNCC: 5 | RNVC: 2

4 Dec 2001

5120-99-666-7433
Torque Wrench Adapter

996667433
52237A3: RNCC: 3 | RNVC: 2

4 Oct 2006

5120-99-573-5980
Crowbar

995735980
2983006: RNCC: 3 | RNVC: 2

17 Nov 1997

5120-99-702-4312
Torque Wrench

997024312
11034: RNCC: 3 | RNVC: 1
SL0: RNCC: 5 | RNVC: 1
25974127: RNCC: 5 | RNVC: 2

25 Jul 1997

5120-99-221-0385
Spanner Wrench

992210385
BLC175023S1ZE24: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-632-5901
Spanner Wrench

996325901
EH9320: RNCC: 3 | RNVC: 2
710M17: RNCC: 5 | RNVC: 2
9320: RNCC: 5 | RNVC: 2
27Y8495: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-548-0848
Torque Wrench Adapter

995480848
UX10490A: RNCC: 3 | RNVC: 2
734-351990: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-614-8786
Taper Lapping P1n

5120-99-748-8937
Press Tool

997488937
64365-80-A5: RNCC: 3 | RNVC: 2

29 Jun 2011

5120-99-735-4999
Mechanical Puller

997354999
A16063: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-614-8759
Special Flanged Nut

996148759
H2989A9: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-787-4429
Mechanical Puller

997874429
CHA 748-1701: RNCC: 3 | RNVC: 2
CHA748-1701: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-105-5716

5120-99-105-6384
Crystal Extractor

5120-99-527-0447
Socket Head Screw Key

995270447
296921: RNCC: 3 | RNVC: 2
296921: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-255-7315
Hub Wheel N Key Set

5120-99-438-5881
Bearing R Extractor

5120-99-175-2953
Torque Wrench Adapter

991752953
DRT 68354: RNCC: 3 | RNVC: 2

3 Jun 2009

5120-99-212-0443
R Installation Tool

5120-99-710-3884
Socket Wrench Socket

997103884
PE 8667: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-401-2506
Tyre Operating Tool

994012506
TL/40: RNCC: 3 | RNVC: 2
TL6A: RNCC: 5 | RNVC: 2
1809Z102B: RNCC: 5 | RNVC: 2
TL/6A: RNCC: 6 | RNVC: 9
16C2003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-214-4255
Spanner Wrench

992144255
NO PRIMARY REF 99-214-4255: RNCC: 3 | RNVC: 2
7244-404: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-825-7394
Valve Tappet Adjusting Tool

998257394
KM2246: RNCC: 3 | RNVC: 2
VR2041: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-124-2147
Combination Box And Open End Wrench

991242147
OEX20A: RNCC: 3 | RNVC: 2
CTA220: RNCC: 5 | RNVC: 2
RJ625: RNCC: 5 | RNVC: 2
H21212: RNCC: 5 | RNVC: 2
H6446: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
1L351: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-947-5229
Open End Wrench

999475229
M2636448-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-604-8500
Fastener Extractor

996048500
A310434: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-571-3175
Socket Head Screw Key

995713175
LSA 901 42/1: RNCC: 3 | RNVC: 2

6 May 2004

5120-99-558-4124

5120-99-762-2730
Tommy Bar

997622730
TA565: RNCC: 3 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

4 Apr 2006

5120-99-759-5454
Valve Fitting Tool

997595454
YN74918: RNCC: 3 | RNVC: 2

14 Jun 2000

5120-99-763-9921
Clut Alignment Tool

997639921
MS 84: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-0984
Socket Wrench Socket

997600984
1945T407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-766-1004
Socket Screwdriver

997661004
TM85: RNCC: 3 | RNVC: 2
TM85: RNCC: 5 | RNVC: 2
TM85: RNCC: 6 | RNVC: 9
1L-7661004: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-192-0258
Combination Box And Open End Wrench

991920258
24-2934: RNCC: 3 | RNVC: 2
CSM230: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-841-5616

5120-99-471-0790
Wrench Crowfoot

994710790
1L233: RNCC: 3 | RNVC: 2

3 Dec 1980

5120-99-542-0393
Spanner Wrench

995420393
VG82564PTA: RNCC: 3 | RNVC: 2
127893: RNCC: 5 | RNVC: 2
VG82564A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-0368
Open End Wrench

991200368
P194055: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-454-1198
Spanner Wrench

994541198
MBCJ610: RNCC: 3 | RNVC: 2
0MBCJ610: RNCC: 5 | RNVC: 2
27L5165: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-108-5766
Socket Wrench Extension

991085766
ZC54000644: RNCC: 3 | RNVC: 2
Y107 092 10: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-500-8451
Spanner Wrench

995008451
65X0013A: RNCC: 3 | RNVC: 2
FV2294848: RNCC: 5 | RNVC: 2

3 Jun 2009

5120-99-655-1497
Mechanical Puller

996551497
460009203B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-274-4518
Spanner Wrench

992744518
100147-8690-ASY: RNCC: 3 | RNVC: 2
100147-8690-ASY: RNCC: 5 | RNVC: 2

30 Jun 2010

5120-99-445-1119
Spanner Wrench

994451119
NO PRIMARY REF 99-445-1119: RNCC: 3 | RNVC: 2
441-0005: RNCC: 5 | RNVC: 2
W3WCCLC441-0005: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-733-4569
Puller

997334569
9992679: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-719-1011
Hand Hammer Head

997191011
1303: RNCC: 3 | RNVC: 2
533: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-051-7768
Mechanical Puller

990517768
S3S18346000: RNCC: 3 | RNVC: 2
S3S18346000: RNCC: 5 | RNVC: 2

3 May 1994

5120-99-710-7639
Box Wrench

997107639
KU13108: RNCC: 3 | RNVC: 2
RT20860: RNCC: 5 | RNVC: 2
64TN6: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-195-5104
Nut

991955104
20011: RNCC: 3 | RNVC: 2

7 Oct 1998

5120-99-530-3615
Pneumatic Tire Valve Repair Tool

995303615
1623BM: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-587-8810
Barring Tool

995878810
002332: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-550-5181
Double Handl Wrench

5120-99-708-8684
Box Wrench

997088684
Y 503779: RNCC: 3 | RNVC: 2
C14 503779: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-812-0362
Hydrauli Puller Leg

998120362
152424: RNCC: 3 | RNVC: 2
500-4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-629-9734
Cross Tip Screwdriver

996299734
IT/PH3/6: RNCC: 3 | RNVC: 2

19 Nov 1990

5120-99-724-5483
Socket Wrench Socket

997245483
18300A 3/4: RNCC: 3 | RNVC: 2

25 Jul 2006

5120-99-137-8524
Tri Win Screwdriver

991378524
SSTW65: RNCC: 3 | RNVC: 2
TWD2-5: RNCC: 3 | RNVC: 2
ZEPTW301P5: RNCC: 5 | RNVC: 2
1C8350: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-262-1481
Torque Wrench

992621481
011017: RNCC: 3 | RNVC: 1
TSN25D: RNCC: 5 | RNVC: 1

8 Feb 2007

5120-99-075-2803
Adjustable Wrench

990752803
105.375: RNCC: 3 | RNVC: 2
FACOM105.375: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-264-5387
Pressure Box

992645387
HU21460: RNCC: 3 | RNVC: 2
000RN-107: RNCC: 6 | RNVC: 9

17 Apr 2000

5120-99-852-8284
S Adaptor-Extension

998528284
FABLM4: RNCC: 3 | RNVC: 2
FABLM4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-429-4416
Seali Removing Tool

994294416
A.S.110214.: RNCC: 3 | RNVC: 2
603414: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-439-7267
Open End Wrench

994397267
WD7285.2: RNCC: 3 | RNVC: 2
WE128B3: RNCC: 6 | RNVC: 9

14 Mar 2000

5120-99-764-6658
Track.Blade

997646658
1171 J: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-99-887-9852
Socket Wrench Socket

998879852
TMFS 1: RNCC: 3 | RNVC: 2
TMFS1: RNCC: 6 | RNVC: 9

3 Jun 2009

5120-99-659-4609
Drive Pin Punch

996594609
83770011-407: RNCC: 3 | RNVC: 2

16 Apr 1982

5120-99-812-3920

5120-99-810-6773

5120-99-485-3208
Seal Inserter

994853208
MBEU58831: RNCC: 3 | RNVC: 2

24 Jul 2004

5120-99-257-5728
Socket Wrench Socket

992575728
BUGGSIE 448: RNCC: 3 | RNVC: 2
448: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-127-5370
Box Wrench

991275370
9RBM89: RNCC: 3 | RNVC: 2
2RBM89: RNCC: 6 | RNVC: 9
BS3555: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-617-0358
Mechanical Puller

996170358
PE55824: RNCC: 3 | RNVC: 2
PE55824: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-679-8073
Torque Wrench

996798073
12007: RNCC: 3 | RNVC: 2

2 Sep 2002

5120-99-808-3673
Control Rod Bus Key

5120-99-808-3662

5120-99-608-2941
Torque Wrench Adapter

996082941
29715: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-99-101-8061
Combination Box And Open End Wrench

991018061
UT120: RNCC: 3 | RNVC: 2
RT6087: RNCC: 5 | RNVC: 2
64TN42: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-978-1923
Socket Wrench Socket

999781923
ABM12: RNCC: 3 | RNVC: 2
BS4006-TABLE 8 12MM: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-509-7570
Torque Adaptor

995097570
4045-A5: RNCC: 3 | RNVC: 2

29 Oct 2009

5120-99-560-5336
Socket Wrench Socket

995605336
NR88353: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-747-5650
Mechanical Puller

997475650
P-891137-403: RNCC: 3 | RNVC: 2
P891137-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-867-9474
Torque Wrench

998679474
BTT3-0330-071-000: RNCC: 3 | RNVC: 2

21 Sep 2012

5120-99-919-6400
Lapping Tool

999196400
91-841-005-065: RNCC: 3 | RNVC: 2
020150 R1 DL00029: RNCC: 5 | RNVC: 2

26 Aug 2009

5120-99-838-3749
Cylinder Hea Wrench

998383749
NO PRIMARY REF 99-838-3749: RNCC: 3 | RNVC: 2
J1928-02: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-837-3895
Rotor Insertion Too

998373895
NO PRIMARY REF 99-837-3895: RNCC: 3 | RNVC: 2
181812-77: RNCC: 5 | RNVC: 2

23 Apr 2012

5120-99-881-2134
Release Tool

998812134
AE115: RNCC: 3 | RNVC: 2
052G5-009: RNCC: 6 | RNVC: 9

21 Jul 2005

5120-99-125-4950
Nose Assembly

991254950
7494-3400: RNCC: 3 | RNVC: 2
7494-3400: RNCC: 5 | RNVC: 2
7494-3400: RNCC: 5 | RNVC: 9
85-690-4395: RNCC: 6 | RNVC: 9

11 Sep 1991

5120-99-726-7509
Socket Wrench Crowfoot Attachment

997267509
NO PRIMARY REF 99-726-7509: RNCC: 3 | RNVC: 2
KEN-582-6287K: RNCC: 5 | RNVC: 2
25975652: RNCC: 5 | RNVC: 2

16 Nov 2011

5120-99-869-3606
Nut Spinner Blade

998693606
5490-06-SOCKET 5MM: RNCC: 3 | RNVC: 2

22 Aug 1995

5120-99-549-5180
Piston Inserter

995495180
HTE-T7076: RNCC: 3 | RNVC: 2

28 Oct 2002

5120-99-514-9391
Socket Wrench Handle

995149391
13256: RNCC: 3 | RNVC: 2

23 Oct 2003

5120-99-207-8875
Seal Housing

992078875
GMB75950: RNCC: 3 | RNVC: 2
0EB1345: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-812-3966

5120-99-716-7343
Socket Wrench

997167343
SIZE 2: RNCC: 3 | RNVC: 1
PE15261: RNCC: 5 | RNVC: 1
PE15261: RNCC: 5 | RNVC: 1
T2BE1029: RNCC: 5 | RNVC: 1
T2BE1029: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-120-9849
Blind H Riveter Kit

991209849
7049-7588: RNCC: 3 | RNVC: 2
1C6837: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-153-3807
Inserted Hammer Face

991533807
SC1: RNCC: 3 | RNVC: 2

31 Oct 2012

5120-99-212-9159
Socket Head Screw Key

992129159
RE100WA10: RNCC: 3 | RNVC: 2

23 Mar 2006

5120-99-728-4408
Open End Wrench

997284408
01B 205: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-051-4918
Socket Wrench Socket

5120-99-719-1881
Socket Wrench Socket

997191881
GU 23967/1: RNCC: 3 | RNVC: 2
NK28: RNCC: 6 | RNVC: 9
075 28M: RNCC: 6 | RNVC: 9
05010028: RNCC: 6 | RNVC: 9
05710036: RNCC: 6 | RNVC: 9
25010028: RNCC: 6 | RNVC: 9
GU23967: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-851-1977
Forming Set

998511977
99-102: RNCC: 3 | RNVC: 2
FL963G80008: RNCC: 6 | RNVC: 9

26 Sep 1996

5120-99-910-4825
Straightening Or Be

999104825
C00RDPATH1489: RNCC: 2 | RNVC: 2

25 Apr 1991

5120-99-722-6581
Immobiliser

997226581
PE 59824: RNCC: 3 | RNVC: 2
PE 59824: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-241-8108
Socket Wrench Handle Ratchet Head

992418108
04-7155: RNCC: 3 | RNVC: 2

9 May 2013

5120-99-521-0440
Spanner Wrench

995210440
A601343: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-6602
Socket Wrench Set

991366602
60SET: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-419-5155
Water T Tube Driver

994195155
0-691A: RNCC: 3 | RNVC: 1
0262-1891: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-467-9998
Spanner Wrench

994679998
6802150: RNCC: 3 | RNVC: 2
27FR3156: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-465-3632
Disc

994653632
NO PRIMARY REF 99-465-3632: RNCC: 3 | RNVC: 2
1B5666: RNCC: 5 | RNVC: 2

26 Oct 1978

5120-99-544-1275
Screw Jack

995441275
MTE0290-104: RNCC: 3 | RNVC: 2
982S40001: RNCC: 6 | RNVC: 9

16 Dec 1998

5120-99-614-6212
Hand Hammer

996146212
KEN-525-5760K: RNCC: 3 | RNVC: 2

18 May 2009

5120-99-724-4445
Adaptor Pins

997244445
18G1014-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-459-0657
Mechanical Puller

994590657
HW37007: RNCC: 3 | RNVC: 2
64VV2150: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-459-0594
Pres Adjusting Tool

994590594
AK368: RNCC: 3 | RNVC: 2
64VV1193: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-5548
Deman Castle Wrench

996665548
DE1715: RNCC: 3 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

10 Nov 2005

5120-99-201-7851
Spanner Wrench

992017851
FV 466153: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-536-5971
Socket Wrench Handle

995365971
ST20: RNCC: 3 | RNVC: 2
0D12741: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-829-8822
Retaining Bracket

998298822
V3775-3: RNCC: 3 | RNVC: 2

24 Feb 1978

5120-99-786-2769
Open End Wrench

997862769
9-1670: RNCC: 3 | RNVC: 2
H02377: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-250-1400

5120-99-799-0737
Mod Kit

997990737
LTM050/1: RNCC: 3 | RNVC: 2

22 May 1986

5120-99-129-8831
Reaction Bar

991298831
17208: RNCC: 3 | RNVC: 2

27 Nov 1992

5120-99-862-1103
Setting Gauge

998621103
FV1051659: RNCC: 3 | RNVC: 2
112163ST: RNCC: 5 | RNVC: 2

16 Feb 1983

5120-99-863-1424
Yoke Assembly Tool

998631424
EFMC75122: RNCC: 3 | RNVC: 2

8 Feb 2003

5120-99-862-3121
Torque Wrench

998623121
TQSS2FUA: RNCC: 3 | RNVC: 2
TQSS2FUA: RNCC: 5 | RNVC: 2

11 Jul 1994

5120-99-137-5721
Socket Wrench Socket

991375721
PHH1100: RNCC: 3 | RNVC: 2
PHH1100: RNCC: 5 | RNVC: 2
1L608: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4665
Hammer Face

999104665
H5628: RNCC: 3 | RNVC: 2
1B1341: RNCC: 6 | RNVC: 9
FA14161: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-0346
Crimping To Locator

991300346
611763-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-838-6402
Valve Spring Compressor

998386402
18G106A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-855-1359
Disassembly Tool

998551359
2 0064-703: RNCC: 3 | RNVC: 2

7 Mar 2003

5120-99-144-6136
Rotar Assembly Tool

991446136
460002135: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-767-1727
Tor Screwdriver Set

997671727
MBEU57832: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-104-5325
Mechanical Puller

5120-99-364-0134
Socket Head Scr Key

5120-99-633-3081
Open End Wrench

996333081
JA7037: RNCC: 3 | RNVC: 2
874177: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-224-4561
Wrench Spanner

992244561
534016: RNCC: 3 | RNVC: 2
71A551: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-724-3520
Spanner Wrench

997243520
PB1251: RNCC: 3 | RNVC: 2

19 Feb 2005

5120-99-524-3059

5120-99-556-6559

5120-99-084-5016
Torque Wrench

990845016
NP931353: RNCC: 3 | RNVC: 2
8003913P00: RNCC: 5 | RNVC: 2

19 May 1997

5120-99-244-9059
Tool Set

992449059
VDS37091: RNCC: 3 | RNVC: 2

17 Feb 1998

5120-99-136-2732

5120-99-136-9697

5120-99-137-0485
Crimping To Locater

5120-99-946-8409

5120-99-450-8459
Binocular Tool

994508459
0S3326A: RNCC: 3 | RNVC: 2
C1AFC2644DET22: RNCC: 5 | RNVC: 2
V70S3326A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-104-1774
Driv Adaptor Socket

991041774
G18-1B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-754-5380
Spanner Wrench

997545380
P-890613-405: RNCC: 3 | RNVC: 2
P890613-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-764-0058
Extractor Body

997640058
P-891138-001: RNCC: 3 | RNVC: 2
P891138-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-146-2815
Servocylinde Puller

991462815
S6170-65018: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-149-8194
Bearing And Bushing Inserter And Remover

991498194
EA6405G514-101: RNCC: 3 | RNVC: 2

26 Nov 1999

5120-99-455-0015
Spanner

994550015
W 5703 807 AC: RNCC: 3 | RNVC: 2

28 Jan 1999

5120-99-521-3641
Mechanical Puller

995213641
N919/136: RNCC: 3 | RNVC: 2
3/4VX9L: RNCC: 6 | RNVC: 9
D/CSSE/DTR/19/339/3631A: RNCC: 6 | RNVC: 9

12 Dec 1992

5120-99-214-4095
Reel Clamp

5120-99-818-2776
Lifting Pneumatic Bag

998182776
70-99-518: RNCC: 3 | RNVC: 2

15 May 2009

5120-99-816-6225
Screwdriver And Tyr

998166225
NO PRIMARY REF 99-816-6225: RNCC: 3 | RNVC: 2
C3BF10824: RNCC: 5 | RNVC: 9
LV12C3BF10824: RNCC: 6 | RNVC: 9

5 Sep 1980

5120-99-214-4096
Adaptor

992144096
PD1D1A: RNCC: 3 | RNVC: 9
21825479: RNCC: 5 | RNVC: 2
H338-936046: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-7279
Bricklay Hammer Tip

991227279
CL: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
H6534: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-215-8701
Injector Sleev Tool

992158701
EB001221: RNCC: 3 | RNVC: 2

1 Jul 1997

5120-99-136-7220
Refri Wrench Socket

991367220
DRX187: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-5979
Auger Extension Rod

991205979
1RESM5318B2-2: RNCC: 3 | RNVC: 1
W8WA6414: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-829-4090
Hub Cover Removal L

5120-99-991-0560
Spanner

999910560
2 0044-698: RNCC: 3 | RNVC: 2

7 Mar 2003

5120-99-988-3622
S Adaptor-Extension

999883622
FABLM6: RNCC: 3 | RNVC: 2
FABLM6: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-666-8045
Dowel Extractor

996668045
D3112SFM11: RNCC: 3 | RNVC: 2

25 Jan 2007

5120-99-130-0412
Crimping To Locator

991300412
604819-1: RNCC: 3 | RNVC: 2
1H621: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-149-0475
Spanner Wrench

991490475
460002943: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-500-3843
Insertion Tool

995003843
MBEU57041: RNCC: 3 | RNVC: 2

27 Nov 1995

5120-99-733-2990
Mechanical Puller

997332990
S3S17467000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-471-3046
Friction Igniter

994713046
CN331: RNCC: 3 | RNVC: 2

14 Oct 2003

5120-99-406-2548
Turnlock Fastener Clinching Punch

994062548
F5TOOL1: RNCC: 3 | RNVC: 2
28FP445: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-104-3277
Elec Alignment Tool

991043277
NO PRIMARY REF 99-104-3277: RNCC: 3 | RNVC: 2
XT64: RNCC: 5 | RNVC: 2
W10709: RNCC: 5 | RNVC: 2

9 Oct 1990

5120-99-571-5340
Jaw Cable Grip

995715340
DNCMSW13-140-23: RNCC: 2 | RNVC: 2
0231-23: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-716-4140

5120-99-730-2787

5120-99-792-5789

5120-99-331-8651
Screwdriver Bit

993318651
MBEU82238: RNCC: 1 | RNVC: 2
029610: RNCC: 3 | RNVC: 2

26 Jan 2010

5120-99-571-2269
Pliers

995712269
ACP8: RNCC: 3 | RNVC: 2
376-8614: RNCC: 5 | RNVC: 2
UWS4B: RNCC: 6 | RNVC: 9

12 Aug 2002

5120-99-155-8789
Torque Screwdriver

991558789
015200: RNCC: 3 | RNVC: 1
MINOR FH BLUE: RNCC: 5 | RNVC: 1

7 Feb 2007

5120-99-154-2591
Non Return Va Tool

991542591
MC09071: RNCC: 3 | RNVC: 2
XP99PD01097: RNCC: 6 | RNVC: 9

30 Jun 1999

5120-99-423-2462
Spanner Wrench

994232462
GM4699: RNCC: 3 | RNVC: 2
GD1067: RNCC: 5 | RNVC: 2
4K2517: RNCC: 5 | RNVC: 2
0249-2517: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-794-4206
Bit

997944206
TMAM3-2: RNCC: 3 | RNVC: 2
TMAM3-2: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-874-0172
Slotted Nut Spanner

998740172
17229224-0: RNCC: 3 | RNVC: 2
17229224-0: RNCC: 5 | RNVC: 2
021JB-047: RNCC: 6 | RNVC: 9

23 May 2002

5120-99-987-5057
C Clamp

5120-99-133-5426
Slide Block Assembl

991335426
TURNEX HTSB2: RNCC: 3 | RNVC: 2
NPPOGAMA4B2060405: RNCC: 6 | RNVC: 9

5 Jul 2005

5120-99-401-3866
Rocker Sh Extractor

994013866
262749: RNCC: 3 | RNVC: 2
RO.262749: RNCC: 5 | RNVC: 2
16C5463: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-460-4054
Rear Torque Spanner

994604054
PE 52426: RNCC: 3 | RNVC: 2
64DE1012: RNCC: 6 | RNVC: 9
64DE1012: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-551-5837
Adjustable Wrench

995515837
H24944: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

3 Apr 2008

5120-99-465-7834
Mechanical Puller

994657834
CX56549: RNCC: 3 | RNVC: 2
37A8838: RNCC: 6 | RNVC: 9
37A8838: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-459-0823
Torque Wrench Adapter

994590823
UT245: RNCC: 3 | RNVC: 2
64AE48: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-2882
Socket Wrench Socket

994012882
HB1250: RNCC: 3 | RNVC: 2
16C3327: RNCC: 6 | RNVC: 9

19 Oct 1979

5120-99-979-1209
Lifting Pneumatic Bag

999791209
EA9905G010-041: RNCC: 3 | RNVC: 2

1 Jul 1998

5120-99-977-2525
Combination Box And Open End Wrench

999772525
1952M7: RNCC: 3 | RNVC: 2
13-40-08-07-07: RNCC: 3 | RNVC: 2
RJM7: RNCC: 3 | RNVC: 2
CSM207: RNCC: 3 | RNVC: 2
436-9167: RNCC: 5 | RNVC: 2
436-9167: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-593-2485
Torque Meas Adaptor

995932485
DR3180-0046-SA: RNCC: 3 | RNVC: 2

16 Apr 1993

5120-99-655-0342
Spanner Wrench

996550342
460009312C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-605-8027
Torque Sett Adapter

996058027
01TC15327: RNCC: 3 | RNVC: 2

15 May 1995

5120-99-607-9737
Mechanical Puller

996079737
PE54343: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-145-0819

5120-99-454-7759
Spanner Wrench

994547759
UCW858-392: RNCC: 3 | RNVC: 2
721421: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-0020

5120-99-459-0734
Swivel Joint Socket

994590734
UT116: RNCC: 3 | RNVC: 2
64VV3066: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-141-3243
Torque Wrench

991413243
A74810: RNCC: 3 | RNVC: 2
TLS 1360: RNCC: 5 | RNVC: 1
015900: RNCC: 5 | RNVC: 2
TLS 1360 MALE: RNCC: 5 | RNVC: 2
TLS 1360SD: RNCC: 5 | RNVC: 2
015900: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-471-0800
Internal Wrench

994710800
1L426: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-860-2417

5120-99-853-6495
Box Spanner

5120-99-860-2357

5120-99-612-8730
Pliers

996128730
NO PRIMARY REF 99-612-8730: RNCC: 3 | RNVC: 2
SKA1R1500: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-606-9360
Rin Assembly Sleeve

996069360
HW68277: RNCC: 3 | RNVC: 2

11 Jun 1979

5120-99-432-5135
Socket Head Screw Key

994325135
DWS437-1: RNCC: 3 | RNVC: 2
88621-613-915: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-133-6693
Socket Wrench Socket

991336693
HBM 55: RNCC: 3 | RNVC: 2
215-0090: RNCC: 5 | RNVC: 2
ND4701: RNCC: 5 | RNVC: 2
215-0090: RNCC: 5 | RNVC: 2

27 Feb 2006

5120-99-736-6402
Bar Tool

997366402
10534: RNCC: 3 | RNVC: 2
SR1876/4: RNCC: 5 | RNVC: 2
146-90/6: RNCC: 6 | RNVC: 9

8 Jan 1998

5120-99-545-9665
Spanner

995459665
22.775: RNCC: 3 | RNVC: 2
22.775: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-617-1786
Drift

996171786
HU17369: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-794-4182
Box Wrench

997944182
CSRS 603-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-2283
Combination Box And Open End Wrench

991242283
RJ1437: RNCC: 3 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H6457: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-8411
Socket Wrench Socket

991208411
H6293: RNCC: 2 | RNVC: 2
DH344: RNCC: 3 | RNVC: 2
ESA311: RNCC: 3 | RNVC: 2
PE15227: RNCC: 5 | RNVC: 1
T2BA4964: RNCC: 5 | RNVC: 1
H21390: RNCC: 5 | RNVC: 2
H21684: RNCC: 5 | RNVC: 2
H21772: RNCC: 5 | RNVC: 2
851737: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-561-7055
Ratchet Wrench

995617055
NR061: RNCC: 3 | RNVC: 2
6: RNCC: 5 | RNVC: 2
205V39: RNCC: 5 | RNVC: 2
205V1TEM39: RNCC: 5 | RNVC: 2
335: RNCC: 5 | RNVC: 2
J316-462667: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-742-0441
Mechanical Puller

997420441
2/6000/001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-219-7346
Replacer Adaptor

992197346
LC 550-16: RNCC: 3 | RNVC: 2
RW1003/1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-761-3719
Open End Box Wrench

997613719
P461F1912/1: RNCC: 3 | RNVC: 2
H727-460329: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-374-7096
Drawing Tool Assemb

993747096
H/46104: RNCC: 3 | RNVC: 2
A 1041001-F: RNCC: 5 | RNVC: 2

3 Apr 2001

5120-99-542-7213
Pipe Flare Punch

995427213
NO PRIMARY REF 99-542-7213: RNCC: 3 | RNVC: 2
32826-205: RNCC: 5 | RNVC: 2
32826-205-2: RNCC: 5 | RNVC: 2
41629: RNCC: 5 | RNVC: 2
H474-750775: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-1058
Combination Box And Open End Wrench

991241058
OEX/32: RNCC: 3 | RNVC: 2
RJ1000: RNCC: 5 | RNVC: 2
CTA232: RNCC: 5 | RNVC: 2
H6452: RNCC: 6 | RNVC: 9
1L358: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-0962
Crimping To Locator

991240962
SL40: RNCC: 3 | RNVC: 2
558-4-01719-000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-311-3167
Spanner

993113167
453/LO: RNCC: 3 | RNVC: 2
SPEED BRACE 0.375 S/P LO DRIVER: RNCC: 6 | RNVC: 9

29 Jun 1993

5120-99-869-2214
Ratchet Wrench

998692214
D/DGES(A)/133/01/02: RNCC: 4 | RNVC: 1
SIZE 3/4 X 7/8IN. A/F: RNCC: 6 | RNVC: 9
TEJ6003: RNCC: 6 | RNVC: 9

14 Sep 1994

5120-99-001-5583
Setting Plug

990015583
503/106B: RNCC: 3 | RNVC: 2
503/106: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-721-9314
Collet

997219314
460009261-1: RNCC: 3 | RNVC: 2
460009261DETAIL1: RNCC: 6 | RNVC: 9

15 Jan 1986

5120-99-503-3565
Coke Fork

995033565
02 9030: RNCC: 2 | RNVC: 2
029030: RNCC: 5 | RNVC: 2

24 Jan 2005

5120-99-710-7744
Spanner Wrench

997107744
100A500852A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-144-6034
Spanner Wrench

991446034
460002186: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-801-4859
Face Spanner Wrench Socket

998014859
HU 27589: RNCC: 3 | RNVC: 2

11 Aug 2003

5120-99-205-4246
Spanner Wrench

992054246
GE67: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-463-9245
Spanner Wrench

994639245
AE5490: RNCC: 3 | RNVC: 2

7 Dec 2011

5120-99-811-6987
Oil Seal Replacer

998116987
18G134BD: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-757-8706
Rivet Nu Setter Kit

997578706
HES 12: RNCC: 3 | RNVC: 2
964 948 900: RNCC: 5 | RNVC: 2
GSIPTGAMA4B2060605RIVNUT: RNCC: 6 | RNVC: 9

20 Jul 2005

5120-99-051-1769
Clutch Carr Adaptor

990511769
1X56 137 109: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-454-7632
Open End Wrench

994547632
MSSK853-5: RNCC: 3 | RNVC: 2
720021: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-811-7169

5120-99-810-6766

5120-99-779-4167
Termi Crimping Tool

5120-99-137-0418

5120-99-773-1134

5120-99-730-5313

5120-99-776-4926
Starter Press Tool

5120-99-179-8998
Grooved Nut Wrench

991798998
10ZZ212642: RNCC: 3 | RNVC: 2

16 Oct 1992

5120-99-401-3654
Spanner Wrench

994013654
FV 143213: RNCC: 3 | RNVC: 2
RE17975: RNCC: 5 | RNVC: 2
LV10FV143213: RNCC: 6 | RNVC: 9
16C5161: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-356-7109
Socket Head Screw Key

993567109
10-2100: RNCC: 3 | RNVC: 2

14 Feb 2002

5120-99-655-4455
Open End Wrench

996554455
ARLAIR316-13-407: RNCC: 3 | RNVC: 2
ARLAIR31613-407: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-814-4539
Socket Wrench Set

998144539
NO PRIMARY REF 99-814-4539: RNCC: 3 | RNVC: 2
480-6896: RNCC: 5 | RNVC: 2

28 Apr 2011

5120-99-209-7850
Stud

992097850
K715-111: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-446-7186
Spanner

994467186
NO PRIMARY REF 99-446-7186: RNCC: 3 | RNVC: 2
UL6035: RNCC: 5 | RNVC: 2
88634-614-936: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-758-5055
Socket Wrench Socket

997585055
NMT-175: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-99-663-6721
Face Spanner Wrench Socket

996636721
212310: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

22 Apr 1997

5120-99-611-0448
Face Spanner Wrench Socket

996110448
9469: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-280-8425
Socket Wrench

992808425
PE37780: RNCC: 3 | RNVC: 2

7 Jan 2013

5120-99-172-8555
Bearing Pre Reducer

991728555
LC 453: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-469-0702
Extractor

994690702
MT1628: RNCC: 3 | RNVC: 2
27Q27350: RNCC: 6 | RNVC: 9

28 Apr 1981

5120-99-747-7406
Torque Wrench Adapter

997477406
460009397B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-745-5806
Socket Wrench Handle

997455806
E85: RNCC: 3 | RNVC: 2
OD29441: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-722-5312
Box Wrench Set

997225312
81058: RNCC: 3 | RNVC: 2

31 May 1989

5120-99-745-6956
Socket

997456956
EKA20994: RNCC: 3 | RNVC: 2
08061429035: RNCC: 5 | RNVC: 2

25 Nov 2008

5120-99-910-6571
Blacksmiths' Tongs

999106571
H2801: RNCC: 2 | RNVC: 2

25 Apr 1991

5120-99-717-2300
Socket Wrench

997172300
T326174: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-994-5869
Die Set

999945869
290-4825: RNCC: 3 | RNVC: 2

19 Dec 2002

5120-99-984-7872
Face Spanner Wrench Socket

999847872
MBEU170528: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-99-962-1947
Seating Wrench Key

999621947
NO PRIMARY REF 99-962-1947: RNCC: 3 | RNVC: 2
N0D2175-58-5: RNCC: 5 | RNVC: 2
22338312: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-655-1673
Torque Wrench Adapter

996551673
P-890193-405: RNCC: 3 | RNVC: 2
P890193-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-265-1443
Receptacle Test Too

992651443
JL/A3-54903: RNCC: 3 | RNVC: 2
090ZL-005: RNCC: 6 | RNVC: 9

5 Mar 2009

5120-99-307-1668
Socket Wrench

993071668
FD1218A: RNCC: 3 | RNVC: 2
W20F0DEN610: RNCC: 6 | RNVC: 9
420-071668: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-707-3515
Open End Wrench

997073515
E15637: RNCC: 3 | RNVC: 2
E15637: RNCC: 5 | RNVC: 2

10 Mar 2009

5120-99-138-6845
Combination Box And Open End Wrench

991386845
RJM20: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-820-0192
Socket

998200192
27088: RNCC: 3 | RNVC: 2

23 Oct 2003

5120-99-820-6915
Spring Compres Tool

998206915
600536: RNCC: 3 | RNVC: 2
R0600536: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-954-9016
Expander Tool

999549016
107246ST: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-962-3962
Ammunition Key Pin

999623962
RL21923: RNCC: 3 | RNVC: 1
Q2QB3473: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-961-7675
Drift

999617675
B2BC3472: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-729-0509
Torque Wrench

997290509
011017: RNCC: 3 | RNVC: 1
TSN25D: RNCC: 5 | RNVC: 1

8 Feb 2007

5120-99-248-4587
Hand Hammer

992484587
RE100BPH 0.9: RNCC: 3 | RNVC: 2

22 Mar 2006

5120-99-501-1821
Cover Removal Tool

995011821
TA530: RNCC: 3 | RNVC: 2
TA530: RNCC: 5 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

13 Feb 2009

5120-99-607-6506
Mechanical Puller

996076506
S3S11211000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-808-3703
Lap Assembly

998083703
NO PRIMARY REF 99-808-3703: RNCC: 3 | RNVC: 2
7044-432: RNCC: 5 | RNVC: 2
ET432: RNCC: 5 | RNVC: 2
Z7044-432: RNCC: 5 | RNVC: 2
LV6MT12CB7044-432: RNCC: 6 | RNVC: 9
16C3933: RNCC: 6 | RNVC: 9

21 Jul 1978

5120-99-454-7685
Open End Wrench

994547685
MDSK858-150: RNCC: 3 | RNVC: 2
720959: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-725-7408
Crimp To Positioner

997257408
HPD 309: RNCC: 3 | RNVC: 2
1M/1164: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-0367
Col Retaining Screw

991370367
12612: RNCC: 3 | RNVC: 2
31E90156: RNCC: 6 | RNVC: 9
1C7990: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-133-8413
Torque Screwdriver

991338413
015903: RNCC: 3 | RNVC: 1
TLS1360 SD ESD: RNCC: 5 | RNVC: 1

8 Feb 2007

5120-99-655-0326
Mechanical Puller

996550326
460009231C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-645-7143

5120-99-640-3997

5120-99-129-8829
Lifting Tool

991298829
00832000: RNCC: 3 | RNVC: 2

13 Aug 1999

5120-99-716-0959
Bearing And Bushing Inserter

997160959
T77792: RNCC: 3 | RNVC: 2
PE50104: RNCC: 5 | RNVC: 2
64DE13: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-547-1177
Indent Tool

995471177
R5173610080: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-229-7866
Remote Egress Tool

992297866
332/G0138: RNCC: 3 | RNVC: 2

24 Mar 2010

5120-99-104-0235
Offset Screwdriver

991040235
SK1716896: RNCC: 3 | RNVC: 2
Z3ZC28493: RNCC: 6 | RNVC: 9
10AGZC28493: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-842-9204
Box Wrench

998429204
GA21: RNCC: 3 | RNVC: 2
LV7RRGA21: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-894-8804
Drain Tool

998948804
01-102-16: RNCC: 3 | RNVC: 2
XP98PC01356: RNCC: 6 | RNVC: 9

20 Mar 1998

5120-99-624-9511
Prism Mandrel

996249511
077422: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-654-3024
Sleeve

996543024
P-890529-001: RNCC: 3 | RNVC: 2
P890529-001: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-729-8295
Test Access Tool

997298295
3201-86797-20-2: RNCC: 3 | RNVC: 2

22 Jun 1987

5120-99-120-8404
Socket Wrench Socket

991208404
BS4006-TABLE 5 3/16A/F: RNCC: 4 | RNVC: 1
DH187: RNCC: 5 | RNVC: 2
H21677: RNCC: 5 | RNVC: 2
H21385: RNCC: 5 | RNVC: 2
H6286: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
TABLE I(C) 3/16A/F: RNCC: 6 | RNVC: 9
MCP24B: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
851634: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-751-5265
Crowbar

997515265
S-72-8277-50: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-432-1265
Valve Spring Lifter

994321265
NO PRIMARY REF 99-432-1265: RNCC: 3 | RNVC: 2
RPH3539: RNCC: 5 | RNVC: 2
E6UN000336: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-202-8471
Socket Head Screw Key Set

992028471
100867-9000-002: RNCC: 3 | RNVC: 2

8 Sep 1992

5120-99-612-8164
Mechanical Puller

996128164
121E93-818-00-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-305-2156
Seal Inserter

993052156
99374161: RNCC: 3 | RNVC: 2
CV177203: RNCC: 5 | RNVC: 2

16 Sep 2010

5120-99-277-5573
De-Solder Pump

992775573
SA-6-VDE: RNCC: 3 | RNVC: 2
1B-6153: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-370-8380
Spanner Wrench

993708380
ST250118: RNCC: 3 | RNVC: 2
AS37053/4: RNCC: 6 | RNVC: 9
FV 658967/8: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-661-5672
C Clamp

5120-99-617-1912
C Clamp

996171912
HU18359: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-803-6924
Hand Hydraulic Jack

998036924
343789: RNCC: 3 | RNVC: 2
B343789: RNCC: 5 | RNVC: 2

3 Dec 1992

5120-99-676-5164
Plier Wrench

996765164
SE002330: RNCC: 3 | RNVC: 2

11 May 2006

5120-99-655-5110
Torque Wrench Adapter

996555110
A0118088-5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-562-5402
Speci Assembly Aid

995625402
17229019-0: RNCC: 3 | RNVC: 2
17229019-0: RNCC: 5 | RNVC: 2
021JB-037: RNCC: 6 | RNVC: 9

23 May 2002

5120-99-527-2301
Connec Holding Tool

995272301
NO PRIMARY REF 99-527-2301: RNCC: 3 | RNVC: 2
B40158: RNCC: 5 | RNVC: 2
562835: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-346-9817
Open End Wrench

993469817
825/00113: RNCC: 3 | RNVC: 2
FL9631P0007: RNCC: 6 | RNVC: 9

13 Feb 1996

5120-99-767-1282

5120-99-747-3660
Swage Head

997473660
D12912-56: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-1938
Spanner Wrench

996171938
HU19244: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-439-4431
Ring And Op Spanner

994394431
F1FA17086: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-524-3055

5120-99-524-3057

5120-99-556-6762

5120-99-467-0690
Open End Wrench

994670690
0EW202: RNCC: 3 | RNVC: 2
A2149: RNCC: 5 | RNVC: 2
1C7782: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-538-1597
Output Sh Installer

995381597
9996900: RNCC: 3 | RNVC: 2
FH982SR0011: RNCC: 6 | RNVC: 9

1 Dec 1998

5120-99-716-2461
Extractor

997162461
T285724: RNCC: 3 | RNVC: 2
64LL1017: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-598-6582
Socket Wrench Socket

995986582
NM22LA: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-764-9042
Crowfoot Spanner

997649042
CK540A: RNCC: 3 | RNVC: 2

21 Oct 1987

5120-99-745-5315
Alignment Tool

997455315
64365-80-A13: RNCC: 3 | RNVC: 2

23 Apr 1999

5120-99-127-5518

5120-99-130-1425
Socket Spanner

5120-99-800-1769
Spanner Wrench

998001769
702473 ITEM C: RNCC: 3 | RNVC: 2
702473/911: RNCC: 5 | RNVC: 1
702473: RNCC: 5 | RNVC: 1
702473/911 ITEM C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-513-6814
Boring Guide

995136814
WG1330-0032-101W64B: RNCC: 3 | RNVC: 2
85-690-4356: RNCC: 6 | RNVC: 9

11 Oct 1993

5120-99-335-4908
Removal Tool

993354908
A20594: RNCC: 3 | RNVC: 2
FH964C30001: RNCC: 6 | RNVC: 9

19 Nov 1996

5120-99-060-3764
Gear Puller

990603764
453 7785-106: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-311-2924
Sleeve

993112924
260164-01: RNCC: 3 | RNVC: 2
260164-01: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-151-7569
Leveling-Support Jack

991517569
TW734-300-10-00: RNCC: 3 | RNVC: 2
102JU-016: RNCC: 6 | RNVC: 9

3 Sep 2010

5120-99-130-0414
Crimping To Locator

991300414
600048: RNCC: 3 | RNVC: 2
1H407: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-386-8410
Vice

993868410
J82128: RNCC: 3 | RNVC: 2

22 Mar 2011

5120-99-725-3461
Drill Guide

997253461
80040665: RNCC: 3 | RNVC: 2

4 Nov 2008

5120-99-731-2173
Bearing And Bushing Inserter

997312173
FV2077893: RNCC: 3 | RNVC: 2
AT60096: RNCC: 5 | RNVC: 2

1 May 1986

5120-99-731-2181
Screw Thread Insert Inserter

997312181
FV2090288: RNCC: 3 | RNVC: 2
TRKM12: RNCC: 5 | RNVC: 2
AT61341: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-730-0707
Mechanical Puller

997300707
FV2023358: RNCC: 3 | RNVC: 2

30 Sep 1986

5120-99-735-7974
Open End Wrench

997357974
OPW 218: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-733-0726
Impact Extractor

997330726
HU20827: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-979-1130
Socket Wrench Set

999791130
198-7576: RNCC: 3 | RNVC: 2
198-7576: RNCC: 5 | RNVC: 2

20 Oct 1999

5120-99-977-3844
Ratchet Wrench

999773844
R1011: RNCC: 3 | RNVC: 2
R1011: RNCC: 5 | RNVC: 2
1C8557: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-993-1133
Hand Screw Jack

999931133
CRM 34590: RNCC: 3 | RNVC: 2
40002660: RNCC: 5 | RNVC: 2

1 Apr 2011

5120-99-701-0846
Spanner Wrench

997010846
MP 1547-A: RNCC: 3 | RNVC: 2
MP 1547: RNCC: 5 | RNVC: 2

6 Jun 1991

5120-99-761-3738
Open End Wrench

997613738
P461ZS1029/8: RNCC: 3 | RNVC: 2
H727-460369: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-715-9541
Wrench

997159541
S6172-35000-1: RNCC: 3 | RNVC: 2
S6172-35000: RNCC: 5 | RNVC: 2

4 Feb 1976

5120-99-335-4265
Socket Wrench Socket

993354265
GD600148-001: RNCC: 3 | RNVC: 2

28 Apr 2005

5120-99-244-7610
Hand Terminal Crimping Tool

992447610
HT-230G: RNCC: 3 | RNVC: 2
927-1141: RNCC: 5 | RNVC: 2
IM3861/IL ITEM12: RNCC: 5 | RNVC: 2
IM3861/IL/12: RNCC: 5 | RNVC: 2
FH954M50010: RNCC: 6 | RNVC: 9

21 Nov 1995

5120-99-647-9824
Connecting Support

996479824
PC19063: RNCC: 3 | RNVC: 2
PC19063: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-607-6478
Socket Wrench Crowfoot Attachment

996076478
PE 3841: RNCC: 3 | RNVC: 2
0625P-134: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-3918
Open End Wrench

5120-99-152-3283
Rod And Line Lifter

991523283
80.861.02636.100: RNCC: 3 | RNVC: 2
80.861.02636.100: RNCC: 5 | RNVC: 2

14 Jan 2009

5120-99-116-9293

5120-99-146-4110

5120-99-411-8968
Extractor

994118968
NO PRIMARY REF 99-411-8968: RNCC: 3 | RNVC: 2
ST1915: RNCC: 5 | RNVC: 9
27Q13570: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-541-8928
Socket Screwdri Kit

995418928
100016-07291TL: RNCC: 3 | RNVC: 2
100016-07291TL: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-401-3878
Steering Relay Clip

994013878
NO PRIMARY REF 99-401-3878: RNCC: 3 | RNVC: 2
20-2071: RNCC: 5 | RNVC: 1
262769: RNCC: 5 | RNVC: 2
16C5480: RNCC: 6 | RNVC: 9

27 Nov 1979

5120-99-924-1548
Torque Wren Adapter

5120-99-398-6129
Socket Wrench

993986129
9170299520: RNCC: 3 | RNVC: 2
299520: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-931-6039

5120-99-932-2881
Elec Alignment Tool

5120-99-250-5112
Flexible Fa Spanner

992505112
40-80: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-609-0567
Mechanical Puller

996090567
HU8506-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-541-7057
Torque Wrench Adapter

995417057
17-64-7: RNCC: 3 | RNVC: 9

25 Apr 1991

5120-99-580-5385
Screw Thread Insert Inserter

995805385
U1P1: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-520-9815
Hand Rivet Set

995209815
1-69: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-495-9860
Bearing Staking Installation Tool

994959860
PE34959: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-99-617-1842
Spanner Wrench

996171842
HU17659: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-017-1228

5120-99-500-2736
Torque Wrench

995002736
01TC15325: RNCC: 3 | RNVC: 2

15 May 1995

5120-99-513-2234
Transfer Cent Punch

995132234
TCP1: RNCC: 3 | RNVC: 2
1B-6136: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-414-7720
Drift

994147720
NO PRIMARY REF 99-414-7720: RNCC: 3 | RNVC: 2
ST1900-3: RNCC: 5 | RNVC: 9
27Q12408: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-330-1286
Pivot Block

993301286
00832/DT/035920 ITEM 2: RNCC: 3 | RNVC: 2
00832/DT/035920/2: RNCC: 5 | RNVC: 2
00832/WA/035921 ITEM 2: RNCC: 5 | RNVC: 2
00832/WA/035921/2: RNCC: 5 | RNVC: 2

26 Aug 2000

5120-99-766-4982
Drum Closure Key

997664982
DCK/BR: RNCC: 3 | RNVC: 2
4D/7358: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-559-1750
Open End Wrench

995591750
0DW207: RNCC: 3 | RNVC: 2
47-1-9-000522: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-306-1035
Leveling-Support Jack Set

993061035
114-059-094: RNCC: 3 | RNVC: 2

5 Jul 2010

5120-99-373-0618
Hexagon Key Adaptor

993730618
030120: RNCC: 3 | RNVC: 2
IB2: RNCC: 5 | RNVC: 2
37-01-10: RNCC: 6 | RNVC: 9
FF9706T0002: RNCC: 6 | RNVC: 9

22 Apr 1997

5120-99-135-2503
Socket Wrench Set

991352503
TKS878: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-1963
Riveter B Nosepiece

991361963
13369: RNCC: 3 | RNVC: 2
1C8160: RNCC: 6 | RNVC: 9

25 Oct 1978

5120-99-786-2778
Open End Wrench

997862778
9-1669: RNCC: 3 | RNVC: 2
H02376: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-769-1465
Pinion Bear Remover

997691465
326571: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-224-0405
Diamond Poi Scriber

5120-99-224-0429

5120-99-142-8794

5120-99-710-7719
Torque Wrench Adapter

997107719
PC3577: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-9692
Removal Tool Bit

5120-99-758-2511
Spanner Wrench

5120-99-783-5845
Torque Wren Adapter

5120-99-768-7391
Sock Wrench Key Set

5120-99-763-8438

5120-99-234-1466
Tommy Bar

5120-99-559-1832

5120-99-431-7186

5120-99-421-7831

5120-99-601-8605
Socket Head Screw Key

996018605
10-5823: RNCC: 3 | RNVC: 2

6 Dec 2003

5120-99-139-6927
Pinch Bar

991396927
C6: RNCC: 3 | RNVC: 2

4 Feb 1984

5120-99-401-2475

5120-99-649-6191
Swaging Punch

5120-99-401-2434

5120-99-391-0393
Open End And Wrench

993910393
F2080: RNCC: 3 | RNVC: 2
FM9929V: RNCC: 6 | RNVC: 9

4 Mar 2000

5120-99-775-3072
Installation And Re

997753072
AED7102: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-556-6485

5120-99-914-7693

5120-99-910-7844
Moulders Smoother

5120-99-666-4614
Socket Wrench Socket

996664614
MBEU191560: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-99-667-8513
Seal Inserter

996678513
MC1248163: RNCC: 3 | RNVC: 2

27 Jan 2011

5120-99-534-2975
Ratchet Wrench

995342975
TX499013: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-522-4217
Spanner Wrench

995224217
336-2020: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-117-8410
Elec Alignment Tool

991178410
NO PRIMARY REF 99-117-8410: RNCC: 3 | RNVC: 2
ET16451: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-687-2027
Socket Head Screw Key

996872027
825/10021: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-790-1130
Bearing And Bushing Driver

997901130
T33467S8: RNCC: 3 | RNVC: 2
2T33467/8: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-300-4192
Spanner Wrench

993004192
T1059: RNCC: 3 | RNVC: 2

20 Jan 1992

Load More Results