What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 50 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 50 of 108

5120-99-978-1895
Screwdriver Bit

999781895
3USB375: RNCC: 3 | RNVC: 2
24-6784: RNCC: 5 | RNVC: 2
UWS3B1B: RNCC: 6 | RNVC: 9

23 Nov 1990

5120-99-825-4048
Injector Indicator

998254048
NO PRIMARY REF 99-825-4048: RNCC: 3 | RNVC: 2
ST1170: RNCC: 5 | RNVC: 2
STU1170: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-178-5062
Cover Assembly Tool

991785062
PO21120: RNCC: 3 | RNVC: 2
P2076111 ITEM 13: RNCC: 5 | RNVC: 2
P2076111/13: RNCC: 5 | RNVC: 2
UWS4A: RNCC: 6 | RNVC: 9

3 Oct 2006

5120-99-655-3833
Mechanical Puller

996553833
CHA754-404-405: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-120-4434
Box Wrench

991204434
DL9A-H6219: RNCC: 2 | RNVC: 9
8REFGP259: RNCC: 5 | RNVC: 1
H6219: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-6029
Circ Guide Assembly

996076029
NO PRIMARY REF 99-607-6029: RNCC: 3 | RNVC: 2
PE3855: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-147-7213
Ball Joint Ext Tool

991477213
70-99-973: RNCC: 3 | RNVC: 2
034HR-004: RNCC: 6 | RNVC: 9

3 Dec 2003

5120-99-915-4872
Box Wrench

999154872
4413687: RNCC: 3 | RNVC: 2
RSK-1646-05103: RNCC: 5 | RNVC: 2

1 Aug 2005

5120-99-542-4636
Ratchet Wrench

995424636
TX499007: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-3016
Box Wrench

991243016
HMA224: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-738-6567
Flywheel An Remover

997386567
18G1381B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-746-0457
Remover And Replace

997460457
MF226B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-752-9035
Pot Inserter

997529035
CBD10304G01: RNCC: 3 | RNVC: 2

21 Dec 2001

5120-99-820-6919
Steering Extractor

998206919
R08457: RNCC: 3 | RNVC: 2
RO.8457: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-817-2573
Torque Wrench Adapter

998172573
72004: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-740-2933
Socket Wrench Socket

997402933
SIM382: RNCC: 3 | RNVC: 2
SIM382: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-739-5755
Bearings Installer

997395755
VT18265: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-580-5413
Coil Thread Nozzle

995805413
A30-2: RNCC: 3 | RNVC: 2
H21471: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-083-4078
Socket H Wrench Key

5120-99-786-2968
Hand Blind Riveter

997862968
2760: RNCC: 3 | RNVC: 2
9-1-CRO: RNCC: 5 | RNVC: 2
90001 CRO: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-769-5233
Clutch S Compressor

997695233
J23616: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-204-8391
Hydraulic J Trigger

992048391
116715D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-351-3969
Handwheel - Master

993513969
A1129001-EH: RNCC: 3 | RNVC: 2

26 Apr 2001

5120-99-471-4204
Socket Wrench Crowfoot Attachment

994714204
NES11854: RNCC: 3 | RNVC: 2

8 Aug 2007

5120-99-873-7000

5120-99-838-3454
Socket Wrench Handle Bar

998383454
91012420: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-742-2906

5120-99-713-6341

5120-99-747-3743
Con Adaptor Spindle

5120-99-714-3977

5120-99-215-1094
Socket Wrench Handle Bar

992151094
N705: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-99-580-5258
Screw Thread Insert Tang Breakoff Tool

995805258
1196-3: RNCC: 3 | RNVC: 2
H23075: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-549-7432
Socket Wrench Extension

995497432
NO PRIMARY REF 99-549-7432: RNCC: 3 | RNVC: 2
13260: RNCC: 5 | RNVC: 2

11 Jun 2004

5120-99-767-2533
Spanner Wrench

997672533
NO.6: RNCC: 3 | RNVC: 1
NO.6/1-1/2INSQFEMALE/REVERSIBLE-: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-884-0184
Seal Inserter

998840184
SB1-P445A0002: RNCC: 3 | RNVC: 2

15 Dec 2004

5120-99-137-6840
Torque Wrench

991376840
MINOR MK 111: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT32: RNCC: 4 | RNVC: 1
H7018: RNCC: 5 | RNVC: 2
1C8331: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-434-7196
Screw Extractor

994347196
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
M100 NO1: RNCC: 6 | RNVC: 9
F1FA13165: RNCC: 6 | RNVC: 9
0273-6881: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-687-2013
Torque Wrench Adapter

996872013
1771T000: RNCC: 3 | RNVC: 2

21 Feb 2003

5120-99-402-7601
Tee Key

994027601
2072S1: RNCC: 3 | RNVC: 2
456: RNCC: 6 | RNVC: 9
0821-2072: RNCC: 6 | RNVC: 9
2072.S1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-812-9119
Box Wrench

998129119
37502T: RNCC: 3 | RNVC: 2
LV4-37502T: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-770-0470
Spanner

997700470
T.L.5055: RNCC: 3 | RNVC: 2

6 Nov 1996

5120-99-869-3586
Single Screwdriver

998693586
1-551: RNCC: 3 | RNVC: 2

14 Aug 1995

5120-99-765-4617
Drill Guide

997654617
D 0.2280: RNCC: 3 | RNVC: 2
D.228: RNCC: 5 | RNVC: 2
3AP5191: RNCC: 6 | RNVC: 9

6 Aug 1993

5120-99-778-7733
Mechanical Puller

997787733
N-SL2433: RNCC: 3 | RNVC: 2
CF440204: RNCC: 5 | RNVC: 2
CF4402044: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-750-9377
Lifting Beam

997509377
4284026-9: RNCC: 3 | RNVC: 2

6 Feb 1987

5120-99-978-1601
Socket Clip

999781601
SC-A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-741-1334

5120-99-415-8047
Hand Dispensing Gun

994158047
MPO50HG: RNCC: 3 | RNVC: 2
010P60029: RNCC: 6 | RNVC: 9

18 Apr 2001

5120-99-251-0870
Bellows

992510870
10716: RNCC: 3 | RNVC: 1
10716: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-307-1743
Mechanical Puller

993071743
FD2309A: RNCC: 3 | RNVC: 2
420-071743: RNCC: 6 | RNVC: 9
W20B3-18556: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-131-6742
Fire Bottle Tool

991316742
EA2605G023-101: RNCC: 3 | RNVC: 2

17 Jun 2003

5120-99-748-8507
Screwdriver

997488507
501600203: RNCC: 3 | RNVC: 2
501600203: RNCC: 5 | RNVC: 2
501600202: RNCC: 5 | RNVC: 9
501-60-02-01: RNCC: 5 | RNVC: 9
501600202: RNCC: 5 | RNVC: 9
501-60-02-01: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-749-8241
Screwdriver

997498241
A3-2129-161-403: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-655-5096
Torque Wrench Adapter

996555096
A0118112-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-977-3522
Socket Head Screw Key

999773522
BS2470: RNCC: 4 | RNVC: 1
AWO 28: RNCC: 6 | RNVC: 9
TABLE 8 0.028A/F SHORT SERIES: RNCC: 6 | RNVC: 9
1C8527: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-051-8830
Torque Wrench

990518830
QUICKSET MINOR IMP F/HEX: RNCC: 3 | RNVC: 2
QS MINOR IMP FH: RNCC: 5 | RNVC: 2
016060: RNCC: 5 | RNVC: 2

5 Apr 1995

5120-99-877-7582
Jack And Whe Handle

998777582
0500 0033X/2: RNCC: 3 | RNVC: 2
6145124: RNCC: 5 | RNVC: 2
83DB-17034-AA: RNCC: 5 | RNVC: 2

12 Sep 1991

5120-99-734-9753
Socket Wrench

997349753
001279703/013: RNCC: 3 | RNVC: 1
M/615/90/0002 ITEM 210: RNCC: 5 | RNVC: 1
M/615/90/0002/013: RNCC: 5 | RNVC: 1
M/615/90/0002/210: RNCC: 5 | RNVC: 1
SSK/M/615/90/0002/210: RNCC: 5 | RNVC: 2
SSK/M/615/90/0002/013: RNCC: 5 | RNVC: 2
SSK/M/615/90/0002 ITEM 210: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5434
Wood Mallet

999105434
C1S381: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H1595: RNCC: 6 | RNVC: 9
H1595: RNCC: 6 | RNVC: 9
F1FA15120: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-5960
Extractor

991505960
NO PRIMARY REF 99-150-5960: RNCC: 3 | RNVC: 2
110079SHT3191: RNCC: 5 | RNVC: 2
110079SH3191: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-659-2239
Drive Pin Punch

996592239
460009421-3D: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-122-5145
Socket Spanner Tip

991225145
FA6A2ANDESD303: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 5 | RNVC: 1
1L539: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-428-9660

5120-99-549-0807
Insert

5120-99-438-6006

5120-99-438-5835

5120-99-438-6004

5120-99-561-8371
Box Spanner

5120-99-438-6172

5120-99-438-6043

5120-99-769-3015
Brake Assembl Guide

997693015
AP61269: RNCC: 3 | RNVC: 2
113928ST: RNCC: 5 | RNVC: 2
FV1048051: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-767-1699
Resetting Tool Asse

997671699
MBEU57047: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-767-2996
Extraction Tool

997672996
GA5043: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-134-7812
Socket Head Screw Key

991347812
POG058057: RNCC: 3 | RNVC: 2

19 Jan 2004

5120-99-775-9207
Spanner Wrench

997759207
MF447: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-838-1889
Mechanical. Puller

5120-99-551-1981
Spanner

5120-99-433-4765
B Burner Vapouriser

5120-99-831-8114
Control Test Block

998318114
V3948-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-212-6999
Liner Withdrawing T

992126999
C203068: RNCC: 3 | RNVC: 2

16 Jul 2004

5120-99-765-8811
Spanner Wrench

5120-99-759-1113
Reamer Adaptor

5120-99-301-2022
Manual Fo Tail Tool

993012022
EA6605G508-041: RNCC: 3 | RNVC: 2
1MEV5HC: RNCC: 6 | RNVC: 9

26 Nov 1999

5120-99-167-5227
Socket Wrench Socket

991675227
T-11881: RNCC: 3 | RNVC: 2
T-11881: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-136-8287
Spanner Wrench

991368287
W4609 REFERENCE 4: RNCC: 3 | RNVC: 2
W4609-4: RNCC: 5 | RNVC: 2
BW4609-4: RNCC: 5 | RNVC: 2
W4609 REF 4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-238-2597
Pressurising Tool

992382597
700-9999-018: RNCC: 3 | RNVC: 2
40010321: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-99-500-4361
Installation Tool

995004361
CSDE/CHK/GSS/208: RNCC: 3 | RNVC: 2

22 Mar 1996

5120-99-862-3190
Extraction Ass Head

998623190
CBD10204P01: RNCC: 3 | RNVC: 2
CBD10204G01 DETAIL 002: RNCC: 5 | RNVC: 2
CBD10204G01/002: RNCC: 5 | RNVC: 2
0707B-062: RNCC: 6 | RNVC: 9

6 Apr 2001

5120-99-999-3014

5120-99-787-4775
Extractor Tool

997874775
3438: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-215-0306
Socket Head Screw Key Set

992150306
NO PRIMARY REF 99-215-0306: RNCC: 3 | RNVC: 2
0812 260 1008: RNCC: 5 | RNVC: 2
85ZZ00006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-5453
Mechanical Puller

996595453
CHA754-332-407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-383-2226
Bearing And Bushing Inserter And Remover

993832226
S14-94-0168 99/1: RNCC: 3 | RNVC: 2

5 Apr 2005

5120-99-116-3195

5120-99-139-7605

5120-99-136-6015

5120-99-131-8240
Drive Pin Punch

991318240
FV2246795: RNCC: 1 | RNVC: 2
BLR 7205: RNCC: 3 | RNVC: 2

2 Dec 2003

5120-99-776-2944
Cylinder Lin Lapper

997762944
VT12230: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-759-7516
Different Extractor

997597516
262757A: RNCC: 3 | RNVC: 2
262757A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-428-1467
Removing Clip Tool

994281467
C.S.A.S.347.: RNCC: 3 | RNVC: 2
SN57A: RNCC: 5 | RNVC: 2
517416: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-460-2483
Leveling-Support Jack

994602483
NTC7955: RNCC: 3 | RNVC: 2

17 Nov 2008

5120-99-122-5028
Tap And Reamer Wrench

991225028
142: RNCC: 3 | RNVC: 2
E142: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-134-9495
Screwdriver Bit And

991349495
70000976: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

10 Sep 2008

5120-99-613-8972
Spanner Wrench

996138972
9545.W075: RNCC: 3 | RNVC: 2
AL118879: RNCC: 5 | RNVC: 2

15 Aug 2013

5120-99-202-2768
Hand Hydraulic Jack

992022768
M35: RNCC: 3 | RNVC: 2
LE30628: RNCC: 5 | RNVC: 2

4 Sep 1990

5120-99-432-5139
Socket Head Screw Key

994325139
DWS437-5: RNCC: 3 | RNVC: 2
88621-613-919: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-179-5371
Bearing And Bushing Inserter

991795371
350-918: RNCC: 3 | RNVC: 2

11 Mar 2009

5120-99-326-8009
Plier Clamp

993268009
DPF.91.001.TA: RNCC: 3 | RNVC: 2
410060: RNCC: 5 | RNVC: 2

20 Aug 2012

5120-99-548-9860

5120-99-560-8371
Open End Wrench

995608371
T2AB2120: RNCC: 3 | RNVC: 2
6J112125: RNCC: 5 | RNVC: 2
40-43-52-56: RNCC: 5 | RNVC: 2
T2AB4040: RNCC: 5 | RNVC: 2
DA3640: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-135-8388
Torque Wren Adapter

5120-99-255-8790
Torque Wrench Adapter

992558790
MBEU59506: RNCC: 1 | RNVC: 2
SSDRT3/8: RNCC: 3 | RNVC: 2
809115: RNCC: 5 | RNVC: 2
809115-9: RNCC: 5 | RNVC: 2
SDRT3/8: RNCC: 5 | RNVC: 2
809115: RNCC: 5 | RNVC: 2
809115-9: RNCC: 5 | RNVC: 2
SDRT3/8: RNCC: 5 | RNVC: 2
SSDRT3/8: RNCC: 5 | RNVC: 2
59506: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-500-0731
Wrench Kit

995000731
625/GA/03960/000: RNCC: 3 | RNVC: 2
X69/0564/01/092: RNCC: 5 | RNVC: 2
625/1/03960/000: RNCC: 5 | RNVC: 2
UW214C: RNCC: 6 | RNVC: 9

29 Apr 1994

5120-99-715-9930
Wrench Spanner

997159930
ST42128: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-192-1692
Tool Valve Assembly

991921692
FV 2122949: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-736-1673
Torque Wrench

997361673
R200-1: RNCC: 3 | RNVC: 2
1702295: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-828-0711
Hand Hydraulic Jack

998280711
HUK12.5-230: RNCC: 3 | RNVC: 2
A12-230: RNCC: 5 | RNVC: 2
HUK12-230: RNCC: 5 | RNVC: 2
03619801: RNCC: 5 | RNVC: 2
FG51432/2: RNCC: 5 | RNVC: 2
M012: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-459-0617
Ratchet Wheel

994590617
HW19791: RNCC: 3 | RNVC: 2
64VV1604: RNCC: 6 | RNVC: 9

7 Nov 1979

5120-99-718-7870
Box Wrench

997187870
KU.13007: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-437-5862
Drive Pin Punch

994375862
MCD33548PAT1989: RNCC: 3 | RNVC: 2
0275-1989: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-666-1138
Retention Test Tool

996661138
DCK.91.071.4LRC: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-99-947-3128

5120-99-120-3437
Socket Wrench

991203437
SDA195212: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-490-4768
Seal Inserter

994904768
MC1269017: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-120-3938
Hand Hammer

991203938
H6072: RNCC: 2 | RNVC: 2

25 Apr 1991

5120-99-463-8836
Pattern Pod

994638836
40000051: RNCC: 3 | RNVC: 2

7 Mar 2011

5120-99-713-8258
Spanner Wrench

997138258
AE0402: RNCC: 3 | RNVC: 2
27M13421: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-363-1978
Socket Head Screw Key

993631978
RE100WA5: RNCC: 3 | RNVC: 2

23 Mar 2006

5120-99-334-5300
Spanner Wrench

993345300
110079-13035: RNCC: 3 | RNVC: 2
26VC-95571: RNCC: 6 | RNVC: 9

2 Mar 2002

5120-99-910-6500
Blacksmith's Bottom Swage

999106500
H2670: RNCC: 3 | RNVC: 2
FA17932: RNCC: 6 | RNVC: 9
H2670: RNCC: 6 | RNVC: 9
1C3253: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-468-3040
Spanner Wrench

994683040
FHQ270: RNCC: 3 | RNVC: 2
27KF1250: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-731-2166
Oil Insertion Tool

997312166
FV2077385: RNCC: 3 | RNVC: 2
AT60088: RNCC: 5 | RNVC: 2

16 Jun 1986

5120-99-521-7966
Socket Head Screw Key

995217966
B27149: RNCC: 3 | RNVC: 2
B27149: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-654-4007
Torque Wrench Adapter

996544007
460009273D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-9334
Hand Hydraulic Jack

5120-99-135-9019

5120-99-454-2627
Plate Removing Tool

994542627
FHQ165: RNCC: 3 | RNVC: 2
26BU91: RNCC: 6 | RNVC: 9
27KF692: RNCC: 6 | RNVC: 9

18 Jan 1977

5120-99-623-6010
Screwdriver Bit

996236010
MBEU58390: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-784-8860
Instruction Manual

997848860
5050-0044: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-1100
Bearing And Bushing Driver

997601100
T10025-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-735-5183
Flat Tip Screwdriver

997355183
544-667: RNCC: 3 | RNVC: 2

17 Sep 1985

5120-99-741-7563
Liner

997417563
133690: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-735-5184
Flat Tip Screwdriver

997355184
544-673: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-753-9734
Clearance Gauge

997539734
J24192: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-737-2381
Adjuster

997372381
T502621: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-753-9768
Bushing Installer

997539768
J24472: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-244-3410
Bearing Carrier Too

992443410
C-91-93843: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-776-7114
Hand Terminal Crimping Tool

997767114
GE 30039: RNCC: 3 | RNVC: 2
G 30039: RNCC: 5 | RNVC: 2

5 Jan 1989

5120-99-667-2771
Spanner Wrench

996672771
DS3121: RNCC: 3 | RNVC: 2

2 Feb 2009

5120-99-702-0544
Open End Wrench

997020544
2888: RNCC: 3 | RNVC: 2

6 Nov 1995

5120-99-434-5579
Inspection Mirror

994345579
ML: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-724-2042
Wrench Spanner

997242042
ZA50002108: RNCC: 3 | RNVC: 2

14 Mar 2003

5120-99-726-5583
Hand Hydraulic Jack

997265583
BJ4: RNCC: 3 | RNVC: 2
CV177372: RNCC: 5 | RNVC: 2

26 May 2011

5120-99-964-8254
Spanner Wrench

999648254
0S87810: RNCC: 3 | RNVC: 2
SS30T107: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-7878
Hand Rivet Snap

999107878
DEF1221: RNCC: 4 | RNVC: 1
H5151: RNCC: 5 | RNVC: 2
H5151: RNCC: 6 | RNVC: 9
1C5459: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-7870
Hand Rivet Snap

999107870
DEF1221: RNCC: 4 | RNVC: 1
H2368: RNCC: 5 | RNVC: 2
H2368: RNCC: 6 | RNVC: 9
1C5409: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4774
Tinmans Horse Head

999104774
H1386: RNCC: 3 | RNVC: 2
F1FA14552: RNCC: 6 | RNVC: 9
1B3565: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4074
Armourers Bit

999104074
H188: RNCC: 4 | RNVC: 1
B2BC3056: RNCC: 6 | RNVC: 9
ET301: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-867-8495
Socket Head Screw Key

998678495
RE100WA9: RNCC: 3 | RNVC: 2

23 Mar 2006

5120-99-910-7882
Hand Rivet Snap

999107882
DEF1221: RNCC: 4 | RNVC: 1
H5155: RNCC: 5 | RNVC: 2
H5155: RNCC: 6 | RNVC: 9
1C5464: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-555-0292
Locator Shaft

995550292
CBD20077P01: RNCC: 3 | RNVC: 2

20 Dec 2001

5120-99-543-9358
Spool Extracto Tool

995439358
28584: RNCC: 3 | RNVC: 2

2 Nov 1984

5120-99-748-9506
Setting Pot

997489506
AO271916: RNCC: 3 | RNVC: 2

3 Oct 2011

5120-99-867-9496
Mechanical Puller

998679496
08070000: RNCC: 3 | RNVC: 2

28 Nov 2012

5120-99-957-5006
Socket Wrench Socket

999575006
EQ500: RNCC: 3 | RNVC: 2
1L173: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-780-5280
Socket Bar

997805280
A.272679: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-869-4554
Inserting Tool

998694554
0661-812-4: RNCC: 3 | RNVC: 2

26 Apr 1996

5120-99-869-3584
Double Screwdriver

998693584
1-175: RNCC: 3 | RNVC: 2

14 Aug 1995

5120-99-869-3600
Socket Head Screw Key

998693600
BS4168 PART 9-TABLE 1 1.3MM: RNCC: 4 | RNVC: 1

14 Aug 1995

5120-99-811-5392
Driftpin

998115392
22557T: RNCC: 3 | RNVC: 2
LV1VSM22557T1-2: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-147-9345
Socket Wrench Adapter

991479345
T527274: RNCC: 3 | RNVC: 2
FB 213304: RNCC: 5 | RNVC: 2
0625P-253: RNCC: 6 | RNVC: 9
062CE-122: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-432-3489

5120-99-402-6472

5120-99-608-7444
Spanner Wrench

5120-99-402-0532

5120-99-402-0424

5120-99-442-6808

5120-99-732-8136
Ca Remover-Replacer

5120-99-753-3079

5120-99-430-5591
Mechanical Puller

994305591
NO PRIMARY REF 99-430-5591: RNCC: 3 | RNVC: 2
Z8526: RNCC: 5 | RNVC: 2
16C6861: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-250-1523
Spanner

992501523
NO PRIMARY REF 99-250-1523: RNCC: 3 | RNVC: 2
37552: RNCC: 5 | RNVC: 2

9 Jun 2004

5120-99-531-7853
Shear Ring Tool

995317853
NO PRIMARY REF 99-531-7853: RNCC: 3 | RNVC: 2
UX11347: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-4345
Digging Bar

999104345
UKD1SPR0V63A-H134: RNCC: 2 | RNVC: 2
H134: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-571-3313
Boilertu Wire Brush

995713313
NO PRIMARY REF 99-571-3313: RNCC: 3 | RNVC: 2
0476-4062: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-469-2775
Spanner Wrench

994692775
AE0749: RNCC: 3 | RNVC: 2
27M11985: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-402-1417

5120-99-401-3708

5120-99-372-8866
Torque Spanner

993728866
CBD10311P01: RNCC: 3 | RNVC: 2

2 Jan 2002

5120-99-494-2154
Torque Screwdriver

994942154
404576SP: RNCC: 3 | RNVC: 2

16 Jan 2012

5120-99-700-3113
Socket Head Screw Key

997003113
NKX010: RNCC: 3 | RNVC: 2
896AK8926: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5527
Pliers

999105527
UKD1SPR0V48: RNCC: 4 | RNVC: 1
1B4107: RNCC: 6 | RNVC: 9
DEFSTAN51-10: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-714-9081
Spanner Wrench

997149081
T329889: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-737-3361
Seal Inserter

997373361
99346251: RNCC: 3 | RNVC: 2
CV181878: RNCC: 5 | RNVC: 2

16 Sep 2010

5120-99-737-3860
Drive Pin Punch

997373860
W5747 214A: RNCC: 3 | RNVC: 2
W5747 214A: RNCC: 5 | RNVC: 2

14 Oct 1987

5120-99-466-6904
Tool

994666904
CK2815: RNCC: 3 | RNVC: 2
37F8031: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-763-8175
Socket Wrench Set

997638175
NA146X: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-730-8125
Hexagon Bit Adaptor

997308125
NMA4: RNCC: 3 | RNVC: 2

14 Jul 1986

5120-99-417-3259

5120-99-320-0961
Float

5120-99-716-6865

5120-99-909-9094
Exhaust Valv Socket

999099094
DB100645: RNCC: 3 | RNVC: 2
UWS4N: RNCC: 6 | RNVC: 9

15 Oct 2004

5120-99-910-6256
Open End Wrench

999106256
BS2583: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-770-8538
Puller Adaptor

997708538
JRB3624: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-745-4695
Seal Inserter

997454695
99346260: RNCC: 3 | RNVC: 2
CV177185: RNCC: 5 | RNVC: 2

14 Feb 2011

5120-99-746-3998
Assembly Mandrel

997463998
T580: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-577-1570
Hand Terminal Crimping Tool

995771570
ISCS12200CTS01: RNCC: 3 | RNVC: 2
INF3C3: RNCC: 6 | RNVC: 9

11 Dec 2000

5120-99-223-2151
Retain Tool Fitting

992232151
AT1025: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-207-6800
Vice Handle

992076800
V408: RNCC: 3 | RNVC: 2
V408: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-825-0843
Axl Adaptor Peg Set

998250843
18G131F: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-952-4178
Spanner Wrench

999524178
PE6921: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-825-1554
Flywheel Puller

998251554
851A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-724-9641
Box Wrench

997249641
EA6205G571-101: RNCC: 3 | RNVC: 2

29 Mar 2008

5120-99-815-7809
Bevel Wheel Spanner

998157809
NO PRIMARY REF 99-815-7809: RNCC: 3 | RNVC: 2
FV55521: RNCC: 5 | RNVC: 2
LV9ASCFV55521: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-795-4059
Hand Hammer

997954059
NO PRIMARY REF 99-795-4059: RNCC: 3 | RNVC: 2
62164: RNCC: 5 | RNVC: 2

8 Jun 2004

5120-99-270-7937
Tap And Reamer Wrench

992707937
E146: RNCC: 3 | RNVC: 2
ECL-553-0315R: RNCC: 5 | RNVC: 2
MOD-0111: RNCC: 5 | RNVC: 2

15 May 2004

5120-99-420-4108

5120-99-417-1034

5120-99-636-6364

5120-99-214-3830
Expander

5120-99-411-9092

5120-99-423-8728

5120-99-557-7430

5120-99-122-4765
Mark Assembly Tool

991224765
16-0167-02: RNCC: 3 | RNVC: 2
1H593: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-4482
Open End Wrench

991204482
1REFDWGGP261: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-525-3111
Lamp Removin Pliers

995253111
X1083: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-6718
Open End Wrench

997106718
NR83570: RNCC: 3 | RNVC: 2
OFW418: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-456-0759

5120-99-144-6072
Selector Compressor

991446072
460002091: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-401-3202

5120-99-452-7546
Spanner Wrench

994527546
MBEU3968: RNCC: 3 | RNVC: 2
AMBEU3968: RNCC: 5 | RNVC: 2
27L470: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-667-5507
Bearing And Bushing Inserter

996675507
205-717/1: RNCC: 3 | RNVC: 2
205-717: RNCC: 5 | RNVC: 2
LRT-54-005: RNCC: 5 | RNVC: 9
LST.132: RNCC: 5 | RNVC: 9

19 Jan 2010

5120-99-659-9369
Mechanical Puller

996599369
460009321B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-252-4776
Screw Extractor

992524776
REX105: RNCC: 3 | RNVC: 2
1G/895: RNCC: 6 | RNVC: 9
REX105: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-909-5632
Socket Wrench

999095632
MZK2033: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-544-3484
Torque Wrench

995443484
AFT2-1: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-976-1875
Extractor Tool

999761875
310SP00: RNCC: 3 | RNVC: 2
310SP00: RNCC: 5 | RNVC: 2
7721730: RNCC: 5 | RNVC: 2

15 Jun 1996

5120-99-972-4178
Pipe Wrench

999724178
CZ17726: RNCC: 3 | RNVC: 2
1H213: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-539-5017
Transformer Jac Key

5120-99-414-2445
Mechanical Puller

5120-99-557-2340

5120-99-700-9460
Torque Wrench Adapter

997009460
P-891066-005: RNCC: 3 | RNVC: 2
BM-P-891066-005: RNCC: 5 | RNVC: 2
P891066-005: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-767-9924
Extractor Leg Set

997679924
085415: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-213-0953
Clamp

992130953
CBD20276P02: RNCC: 3 | RNVC: 2

15 Sep 2007

5120-99-543-5537
Torque Wrench Adapter

995435537
S0E1 5-8: RNCC: 3 | RNVC: 9
S0E1-5-8: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-606-9569

5120-99-637-0719
Spanner Wrench

5120-99-613-1573
Spanner Wrench

5120-99-449-0192

5120-99-537-4445
Socket Head Screw Key

995374445
RE3/M5034 PART 1: RNCC: 3 | RNVC: 2
RE3/M5034: RNCC: 5 | RNVC: 1
RE3/M5034/1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-280-8357
Open Jaw Spanner

992808357
A1181001: RNCC: 3 | RNVC: 2
STAHLWILLE 4004-85: RNCC: 5 | RNVC: 2

19 Apr 2001

5120-99-120-7895
Open End Wrench

991207895
BS192-TABLE 2 1-1/8X1-5/16A/F: RNCC: 4 | RNVC: 1
H20084: RNCC: 5 | RNVC: 2
F1FA17103: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-812-4019

5120-99-812-3994

5120-99-255-7075
Flat Tip Screwdriver

992557075
3342450: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-869-3370
Crimping Tool Die

998693370
MRP519: RNCC: 3 | RNVC: 2

6 Jul 1995

5120-99-467-7868
Drift

994677868
R526A: RNCC: 3 | RNVC: 2
26FX95098: RNCC: 6 | RNVC: 9

7 Nov 1979

5120-99-910-6244
Open End Wrench

999106244
BS192: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-775-8715
Spanner Wrench

997758715
42128S: RNCC: 3 | RNVC: 2
723340: RNCC: 5 | RNVC: 2
727115: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-768-2456
Tappet Ro Extractor

997682456
ST1198: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-7868
Hand Rivet Snap

999107868
DEF1221: RNCC: 4 | RNVC: 1
H2366: RNCC: 5 | RNVC: 2
H2366: RNCC: 6 | RNVC: 9
1C5041: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4601
Stone Fork

999104601
BS3388-FIGURE 36: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-910-7875
Hand Rivet Snap

999107875
DEF1221: RNCC: 4 | RNVC: 1
H2373: RNCC: 5 | RNVC: 2
H2373: RNCC: 6 | RNVC: 9
FA16943: RNCC: 6 | RNVC: 9
1C5414: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-3833
Coil Thre Extractor

996073833
HC22914: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-971-2359
Pry Bar

999712359
FV3024984: RNCC: 3 | RNVC: 2
FL982TF0590: RNCC: 6 | RNVC: 9

1 Apr 1999

5120-99-870-0208
Connector Rele Tool

998700208
NO PRIMARY REF 99-870-0208: RNCC: 3 | RNVC: 2
IRU100000: RNCC: 5 | RNVC: 2
FJ9914L0156: RNCC: 6 | RNVC: 9

9 Jul 1999

5120-99-423-8725
Wrench Spanner

994238725
NO PRIMARY REF 99-423-8725: RNCC: 3 | RNVC: 2
ASPSK436: RNCC: 5 | RNVC: 2
566496: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-527-2050
Spanner Wrench

995272050
11-454-19-10-1029: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-147-5232
Guide Bullet

991475232
EA6205G026-107: RNCC: 3 | RNVC: 2

9 Jan 2002

5120-99-420-4075

5120-99-600-8730
Tools And Box

996008730
64Y1643AND: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-919-9119
Extractor Rod

999199119
6.1546.030: RNCC: 3 | RNVC: 2
6.1546.030: RNCC: 5 | RNVC: 2

7 Sep 2011

5120-99-714-0673
Bearing And Driver

997140673
PE8392: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-150-0200
Spanner Wrench

991500200
AE4530: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-591-7345
Clamp Assembly

995917345
TURNEX CCA001: RNCC: 3 | RNVC: 2
NPPOGAMA4B2060405: RNCC: 6 | RNVC: 9

5 Jul 2005

5120-99-614-8774
Open End Wrench

996148774
HGT611: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-425-7596

5120-99-024-6900
Tool Kit

990246900
H21285: RNCC: 3 | RNVC: 2

27 Sep 1994

5120-99-623-7456
Cont Insertion Tool

996237456
05-2231-12: RNCC: 3 | RNVC: 2

19 Nov 1991

5120-99-402-0880

5120-99-627-7341

5120-99-735-4708
In Grinding Fixture

5120-99-702-6852
Combination Box And Open End Wrench

997026852
CEDC/224/97: RNCC: 3 | RNVC: 2

5 Jul 2012

5120-99-910-4669
Hand Hammer

999104669
BS876: RNCC: 4 | RNVC: 1
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
FA14095: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-719-2925
Claw

997192925
PE53497ITEM9: RNCC: 3 | RNVC: 2
0852 2335: RNCC: 5 | RNVC: 2
8522335: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-542-0394
Spanner Wrench

995420394
VG82564PTB: RNCC: 3 | RNVC: 2
127894: RNCC: 5 | RNVC: 2
VG82564B: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-132-2994
Crimping To Die Set

991322994
R29VT: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-198-2902
Hand Terminal Crimping Tool

991982902
M1N0R19009: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-391-1669
Drain Plug Wrench

993911669
BR90/19-30-70-1010: RNCC: 3 | RNVC: 2
031SJ-017: RNCC: 6 | RNVC: 9

15 May 2003

5120-99-541-9467
Torque Tool Adaptor

995419467
9002-1275: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-660-7537
Torque Wren Adapter

5120-99-910-4676
Hand Hammer

999104676
DL9A-H5321: RNCC: 2 | RNVC: 2
H5321: RNCC: 5 | RNVC: 2
DL9A: RNCC: 5 | RNVC: 2
910-4676: RNCC: 6 | RNVC: 9
H5321: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-712-2598
Open End Wrench

997122598
E30140: RNCC: 3 | RNVC: 2
85-101-2506: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-466-1069
Conversion Adaptor

994661069
NO PRIMARY REF 99-466-1069: RNCC: 3 | RNVC: 2
J57B: RNCC: 5 | RNVC: 2
1C6543: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-757-9036
Bushing And Seal In

997579036
YB-38113: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-99-740-1323
Hand Hammer

997401323
BS876: RNCC: 4 | RNVC: 1
METS/16/01/01: RNCC: 5 | RNVC: 1

4 Feb 2013

5120-99-748-0039
Torque Wrench Adapter

997480039
55437-A8/407: RNCC: 3 | RNVC: 2
55437A8-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-407-1864
Sc Sharpening Stone

994071864
NO PRIMARY REF 99-407-1864: RNCC: 3 | RNVC: 2
203: RNCC: 5 | RNVC: 2
0474-6201: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-5590
Flat Tip Screwdriver

991365590
BS2559:PART 1: RNCC: 4 | RNVC: 1
DEF STAN 51-11 (PART 17): RNCC: 4 | RNVC: 1
881318M1: RNCC: 5 | RNVC: 2
10-99-531: RNCC: 5 | RNVC: 2
H20015: RNCC: 5 | RNVC: 2
H6874: RNCC: 6 | RNVC: 9
E15357: RNCC: 6 | RNVC: 9
962172: RNCC: 6 | RNVC: 9
2006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5960
Adjustable Wrench

999105960
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A-H3013: RNCC: 6 | RNVC: 9
H3013: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-923-9083
Offset Screwdriver

999239083
1571: RNCC: 3 | RNVC: 2
1571: RNCC: 5 | RNVC: 9
0276-923-9083: RNCC: 6 | RNVC: 9
0276-276053: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5594
Nail Set

999105594
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H1946: RNCC: 5 | RNVC: 9
H1946: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-4903
Face Spanner Wrench Socket

994544903
ST70670-2: RNCC: 3 | RNVC: 2
FH980530007: RNCC: 6 | RNVC: 9

3 Aug 1998

5120-99-602-1592
Remote Handlin Tool

996021592
SA200 A JAW: RNCC: 3 | RNVC: 2

3 Mar 2004

5120-99-760-6852

5120-99-345-7539
Hand Hammer

993457539
B090615: RNCC: 3 | RNVC: 2

20 Sep 2011

5120-99-606-9131
Socket Wrench

996069131
UT.501: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-663-1076
Socket Head Screw Key

996631076
5MM: RNCC: 3 | RNVC: 2
LN5MM: RNCC: 5 | RNVC: 2
564-5MM A/F: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-479-6100
Socket Head Screw Key

994796100
441108: RNCC: 3 | RNVC: 2
G3 400 103 8110 DT: RNCC: 5 | RNVC: 2

19 Apr 2006

5120-99-127-5377
Box Wrench

991275377
9RBM2123: RNCC: 3 | RNVC: 2
2RBM2123: RNCC: 6 | RNVC: 9
BS3555: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-156-4112
Spanner Peg

991564112
MBJ9145: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-721-9301
Mechanical Puller

997219301
460009240D: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-120-3937
Hand Hammer

991203937
H6071: RNCC: 2 | RNVC: 2
H57: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-201-7846
Spanner Wrench

992017846
FV 466148: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-468-8362

5120-99-459-0689
Socket Wrench

994590689
GT9049: RNCC: 3 | RNVC: 2
64VV2690: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-482-0512
Socket Wrench Socket

994820512
YN74934A: RNCC: 3 | RNVC: 2

13 Jun 2001

5120-99-606-7652
Spanner Wrench

996067652
PE3759: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-212-8454
Cutters

992128454
NO PRIMARY REF 99-212-8454: RNCC: 3 | RNVC: 2
3AP95159: RNCC: 5 | RNVC: 2

5 Sep 2005

5120-99-130-0402
Crimping To Locator

991300402
604071-2: RNCC: 3 | RNVC: 2
1H384: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-133-4986
Injector Sleev Tool

991334986
EB001224: RNCC: 3 | RNVC: 2

1 Jul 1997

5120-99-192-0825
Torque Wrench Adapter

991920825
0120105: RNCC: 3 | RNVC: 2

15 Apr 2002

5120-99-456-0694
Mechanical Puller

994560694
AM21582: RNCC: 3 | RNVC: 2
27A4381: RNCC: 6 | RNVC: 9
27A4381: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-614-4526

5120-99-551-3823
Socket Wrench Socket

995513823
NM55LA: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-823-8409
Puller Assembly

998238409
FV803578: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-813-1446
Torque Handle

998131446
MBEU82237: RNCC: 1 | RNVC: 2
015200 BLUE: RNCC: 3 | RNVC: 2

26 Jan 2010

5120-99-812-9128
Spanner Wrench

998129128
FV 117105: RNCC: 3 | RNVC: 2
LV4FV117105: RNCC: 6 | RNVC: 9
223789: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-815-7806
Spanner Wrench

998157806
FV 51457: RNCC: 3 | RNVC: 2
LV9ASCFV51457: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-812-7707
Open End Wrench

998127707
FV 131700: RNCC: 3 | RNVC: 2
LV4FV131700: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-828-5289
Injector Timing Gau

998285289
18G1206: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-494-1694
Tensioner Assembly

994941694
C190097: RNCC: 3 | RNVC: 2
C190097AN: RNCC: 5 | RNVC: 2
C190745: RNCC: 5 | RNVC: 2

15 Aug 2001

5120-99-835-5240
Jacking Cradle Box

998355240
NLP25028: RNCC: 3 | RNVC: 2

5 Nov 2008

5120-99-813-0553
Spring Compress Jaw

998130553
KP1432: RNCC: 3 | RNVC: 2
8252569051: RNCC: 5 | RNVC: 2

26 Nov 2008

5120-99-144-6038
Spanner Wrench

991446038
460002190: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-204-8419
Ram Liner

992048419
132106: RNCC: 3 | RNVC: 2

13 Mar 1978

5120-99-149-0365
Assembly Post

991490365
NO PRIMARY REF 99-149-0365: RNCC: 3 | RNVC: 2
460002436: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-424-9954
Spanner

994249954
NO PRIMARY REF 99-424-9954: RNCC: 3 | RNVC: 2
4218A: RNCC: 5 | RNVC: 2
88411-400-287: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-816-6226
Bicycle Spanner

998166226
NO PRIMARY REF 99-816-6226: RNCC: 3 | RNVC: 2
C3BF10834: RNCC: 5 | RNVC: 9
LV12C3BF108: RNCC: 6 | RNVC: 9

2 Jun 1981

5120-99-667-2255
Block

996672255
EA6405G512-103: RNCC: 3 | RNVC: 2

24 Oct 2008

5120-99-783-8633
Socket Spanner

997838633
CES NKCS-04-3/1 1.2.4.42.16: RNCC: 3 | RNVC: 2

23 Apr 1987

5120-99-642-8291
Mechanical Puller

5120-99-136-0939
Socket Wrench Socket

991360939
BS4006-TABLE 4 5.50MM: RNCC: 4 | RNVC: 1
DHM5-5: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6790: RNCC: 6 | RNVC: 9
TABLE I(A) 5.50MM: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-533-9686
Quick Lighter

995339686
2590N: RNCC: 3 | RNVC: 2
259/96828: RNCC: 5 | RNVC: 2

1 Jul 1991

5120-99-731-1559
Filter Assembl Tool

997311559
AF24300: RNCC: 3 | RNVC: 2
SK2177: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-731-1562
Damper Ptvo Remover

997311562
E24641: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-6953
Adaptor

5120-99-529-5547
Wire R Swaging Tool

995295547
3090: RNCC: 3 | RNVC: 2
3090: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-559-3240
Socket Head Screw Key

995593240
3325 A DETAIL 1: RNCC: 3 | RNVC: 2
482-933299: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-664-6100
Ballpoint L-Wrench

996646100
BL2.5MM: RNCC: 3 | RNVC: 2
1C8625: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-2565
T Crimping Tool Die

991382565
48755: RNCC: 3 | RNVC: 2
48755: RNCC: 5 | RNVC: 2
505B0005: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-173-1103
Socket Wrench Screwdriver Attachment

991731103
55644: RNCC: 3 | RNVC: 2
D-HEX: RNCC: 5 | RNVC: 1
80044586: RNCC: 5 | RNVC: 2

1 Nov 2010

5120-99-141-8700

5120-99-136-5711

5120-99-149-0369
Spanner Wrench

991490369
460002443: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-610-4277
Socket Wrench Socket

996104277
AT44: RNCC: 3 | RNVC: 2
UWS4A1: RNCC: 6 | RNVC: 9

11 May 2000

5120-99-729-6693
Heater Bleed Ta Key

997296693
FV 1068820: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-731-2144
Seal Inserter

997312144
FV2077306: RNCC: 3 | RNVC: 2
AT60005: RNCC: 5 | RNVC: 2

12 May 1986

5120-99-731-2186
Drift

997312186
FV2090367: RNCC: 3 | RNVC: 2
AT61420: RNCC: 5 | RNVC: 2

9 May 1986

5120-99-731-2164
Dummy Pin

997312164
FV2077341: RNCC: 3 | RNVC: 2
AT60040: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-731-2149
Dowe Insertion Tool

997312149
FV2077320: RNCC: 3 | RNVC: 2
AT60019: RNCC: 5 | RNVC: 2

8 Apr 1986

5120-99-729-1067
Face Spanner Wrench Socket

997291067
AE5764: RNCC: 3 | RNVC: 2

17 Aug 2011

5120-99-753-9754
Universal Puller

997539754
J24420: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-729-5134
Combination Open End And Spanner Wrench

997295134
13-59570: RNCC: 3 | RNVC: 2

12 Nov 2007

5120-99-730-2101
Locknut Spanner

997302101
33183J: RNCC: 3 | RNVC: 2

15 Aug 1990

5120-99-753-9785
Clearance Gauge

997539785
J26914: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-538-1479
Open End Wrench

995381479
S7B33: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-352-3598
Drill

993523598
D162: RNCC: 3 | RNVC: 2

26 Mar 1991

5120-99-351-3959
Alignment Sleeve

993513959
S2159: RNCC: 3 | RNVC: 2

16 Jan 2001

5120-99-990-1576
Location Pin

999901576
CBD13023P06: RNCC: 3 | RNVC: 2

1 Dec 2001

5120-99-767-9303
Mechanical Puller Attachment

997679303
209.661.7: RNCC: 3 | RNVC: 2
81668306003: RNCC: 5 | RNVC: 2
EKA19909: RNCC: 5 | RNVC: 2

5 Feb 2008

5120-99-726-6291
Spanner Wrench

997266291
A2128: RNCC: 3 | RNVC: 2
S723V PAGE 5 ITEM 21: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-252-7423
Valve Guid Replacer

992527423
GA5018: RNCC: 3 | RNVC: 2
GA5018: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-460-3991
Mechanical Puller

994603991
T86731: RNCC: 3 | RNVC: 2
PE50334: RNCC: 5 | RNVC: 2
64DE314: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-152-8034
Seal Inserter

991528034
308-518: RNCC: 3 | RNVC: 2
308-518: RNCC: 5 | RNVC: 2

13 Dec 2011

5120-99-812-5512
Spanner Wrench

998125512
9535-W041: RNCC: 3 | RNVC: 2
225275: RNCC: 5 | RNVC: 2

7 Feb 2006

5120-99-820-6910
Engine Liftin Plate

998206910
R08459: RNCC: 3 | RNVC: 2
R08459: RNCC: 5 | RNVC: 2
R08459: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-818-7713
Vehicle Service Kit

998187713
TME974: RNCC: 3 | RNVC: 2

14 Nov 2011

5120-99-807-1535
Socket Wrench Screwdriver Attachment

998071535
00806023: RNCC: 3 | RNVC: 2

13 Feb 2003

5120-99-828-2502
Socket Wrench Extension

998282502
FV 871740: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-817-1989
Hand Hammer

998171989
64324: RNCC: 3 | RNVC: 2
64324: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-837-2623
Wrench Spanner

998372623
J9767: RNCC: 3 | RNVC: 2
ASTA1003: RNCC: 5 | RNVC: 2
C4780: RNCC: 7 | RNVC: 2

25 Apr 1991

5120-99-828-5287
Injector Sleeve Exp

998285287
LC173: RNCC: 3 | RNVC: 2
30989T1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-820-8044
Bearing Rin Remover

998208044
47: RNCC: 3 | RNVC: 2
MS47: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-812-3886
Tommy Bar

998123886
Z3001: RNCC: 3 | RNVC: 2
LV3RRZ3001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-718-6881
Holder

997186881
PE56941: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-717-1102
Torque Scre Adaptor

997171102
T389793: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-667-8805
Socket Adapter Set

996678805
TL-502-873: RNCC: 3 | RNVC: 2
TL-502-873: RNCC: 3 | RNVC: 9

28 Oct 2008

5120-99-782-6757
Socket Wrench Socket

997826757
T.8: RNCC: 3 | RNVC: 2
AK.517: RNCC: 5 | RNVC: 2
85-101-2427: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-771-0418
Socket Wrench

997710418
100175-6967-001: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-667-3964
Torque Wrench

996673964
13265: RNCC: 3 | RNVC: 2
596509-01: RNCC: 5 | RNVC: 2
13265: RNCC: 5 | RNVC: 2
596509-01: RNCC: 5 | RNVC: 2

26 Aug 2009

5120-99-659-6830
Mechanical Puller

996596830
48585-A22/405: RNCC: 3 | RNVC: 2
48585A22-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-269-2259
Spanner Wrench

992692259
99SQ-35-50: RNCC: 3 | RNVC: 2
RSK-1646-05018: RNCC: 5 | RNVC: 2

9 Aug 2005

5120-99-440-5023
Brush

5120-99-543-6677
Socket Wrenc Socket

5120-99-826-4494
Two Pin Wrench

5120-99-471-4480
Torque Wrench

994714480
011200 AND 012180: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

17 Sep 2008

5120-99-281-4322
Machinist's Vise

992814322
REC5658259R: RNCC: 3 | RNVC: 2

21 Feb 2013

5120-99-730-7844
Open End Wrench

997307844
A 322: RNCC: 3 | RNVC: 2
A322: RNCC: 6 | RNVC: 9
3AP4925: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-655-3924
Spanner Wrench

996553924
1952T405: RNCC: 3 | RNVC: 2
2144T000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-591-2877
Socket Head Screw Key Set

995912877
210FTAMY: RNCC: 3 | RNVC: 2
H24706: RNCC: 5 | RNVC: 2

3 Aug 1994

5120-99-406-2551
Clinching Pun Block

994062551
F6BLOCK1: RNCC: 3 | RNVC: 2
28FP448: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-714-9087
Mechanical Puller

997149087
TL3422: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-771-6735
Adjustable Wrench

997716735
4060018: RNCC: 3 | RNVC: 2
825/99807: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-655-1554
Face Spanner Wrench Socket

996551554
460009276B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-739-7498
Socket Wrench Adapter

997397498
E3UBA: RNCC: 3 | RNVC: 2
24-6782: RNCC: 5 | RNVC: 2
UWS3B1B: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-145-2337

5120-99-145-0588
Steel Punch

5120-99-619-5185
Open End Wrench

996195185
DA1011: RNCC: 3 | RNVC: 2
1703052: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-108-5681
Pinion Bear Adaptor

991085681
18G 47BH: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-137-8244

5120-99-965-1916

5120-99-965-1917

5120-99-663-3352
Centering Tool

996633352
007-01-35M1: RNCC: 3 | RNVC: 2
002FZ0020: RNCC: 6 | RNVC: 9

28 Nov 2000

5120-99-500-5248
Bridg Assembly Tool

995005248
M56A: RNCC: 3 | RNVC: 2
FJ961DT0020: RNCC: 6 | RNVC: 9

5 Sep 1996

5120-99-350-8671
Inserter And Remove

993508671
MP6808/MP6811: RNCC: 3 | RNVC: 2
ST.83142: RNCC: 5 | RNVC: 2

2 Nov 1993

5120-99-133-9721
Stuffing Box And Pump Packing Extractor Set

991339721
201593001EFA-D16: RNCC: 3 | RNVC: 2

24 Sep 2007

5120-99-554-4392
Socket Wrench

995544392
A88201TEMC1699: RNCC: 3 | RNVC: 2
C1699: RNCC: 5 | RNVC: 1
A8820C1699: RNCC: 5 | RNVC: 2
190-962762: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-7955
Box Spanner

994237955
NO PRIMARY REF 99-423-7955: RNCC: 3 | RNVC: 2
9081-8: RNCC: 5 | RNVC: 2
552842: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-806-9013
Extractor Assembly

998069013
MS284: RNCC: 3 | RNVC: 2
317-50027: RNCC: 5 | RNVC: 2
18G284: RNCC: 5 | RNVC: 2
18G284: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-773-0016
Dua Extractor Tool

997730016
NO PRIMARY REF 99-773-0016: RNCC: 3 | RNVC: 2
424-282: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-6544
Lift Crucible Tongs

999106544
NO PRIMARY REF 99-910-6544: RNCC: 3 | RNVC: 2
0276-910-6544: RNCC: 5 | RNVC: 2

20 Jun 1989

5120-99-467-3144
Connec Removal Tool

994673144
NO PRIMARY REF 99-467-3144: RNCC: 3 | RNVC: 2
M15515-16: RNCC: 5 | RNVC: 2
1H421: RNCC: 6 | RNVC: 9

7 Nov 1978

5120-99-780-7172
Hand Hammer

5120-99-538-6328
Extractor Screw

995386328
F45850: RNCC: 3 | RNVC: 2
AF45850: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-731-2156
Dowe Insertion Tool

997312156
FV2077331: RNCC: 3 | RNVC: 2
AT60030: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-734-6398
Driving Spr Pushrod

997346398
WW470529C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-733-7276
Mechanical Puller

997337276
MS252: RNCC: 3 | RNVC: 2
MS252A: RNCC: 5 | RNVC: 2

25 Apr 1991

Load More Results