What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 48 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 48 of 108

5120-99-437-5857
Drive Pin Punch

994375857
MCD33548PAT1979: RNCC: 3 | RNVC: 2
DRG DEV MCD33548-1976: RNCC: 6 | RNVC: 9
0275-1979: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-569-6878
Pin Inserter And Remover

995696878
KB132L1018-004: RNCC: 3 | RNVC: 2

25 Mar 2004

5120-99-838-3241
Seal Inserter

998383241
WG1388-1957-041: RNCC: 3 | RNVC: 2

2 Apr 2013

5120-99-754-1059
Bearing And Bushing Remover

997541059
EA6405G520-041: RNCC: 3 | RNVC: 2
1MEVGUJ: RNCC: 6 | RNVC: 9

28 Jul 2004

5120-99-288-9414
Alignment Tool

992889414
EB5305G507-041: RNCC: 3 | RNVC: 2
1MEVGTG: RNCC: 6 | RNVC: 9

18 Jul 2004

5120-99-748-7479
Socket Wrench Attac

997487479
48419A22-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-348-4131
Removal Tool

993484131
91-846-291-65: RNCC: 3 | RNVC: 2
020150 R1 DL00993: RNCC: 5 | RNVC: 2

7 Sep 2009

5120-99-730-6767
Ratchet Wrench

997306767
CF39757: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-731-2188
Location Pin

997312188
FV2090369: RNCC: 3 | RNVC: 2
AT61422: RNCC: 5 | RNVC: 2

11 Apr 1986

5120-99-762-6901
Mechanical Puller

997626901
PE 50778: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-763-8186
Socket Wrench Set

997638186
NA354A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-433-4635
Socket Wrench Set

994334635
A7966: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-452-5546
Stand

994525546
CP13739: RNCC: 3 | RNVC: 2
118288ST: RNCC: 6 | RNVC: 9

5 Feb 1990

5120-99-154-5570
Fixed Open End Wrench Set

991545570
154337: RNCC: 3 | RNVC: 2
RES 154337: RNCC: 5 | RNVC: 2
222267: RNCC: 5 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

19 Mar 1999

5120-99-190-7480
Screwdriver Bit

991907480
1UTX20: RNCC: 3 | RNVC: 2

15 Jan 2011

5120-99-782-7431
Wire Termi Wrappers

997827431
5(TB)141093: RNCC: 3 | RNVC: 2
1: RNCC: 5 | RNVC: 2
CN10351: RNCC: 5 | RNVC: 2

28 Jan 1985

5120-99-789-5524
Valve Sprin Adaptor

997895524
PD6118-5: RNCC: 3 | RNVC: 2

17 Apr 1985

5120-99-395-9210
Adaptor

993959210
DSR2037-3: RNCC: 3 | RNVC: 2

30 Aug 1990

5120-99-978-4925

5120-99-581-5689
Extractor

995815689
M10240: RNCC: 3 | RNVC: 2
002FZ0001: RNCC: 6 | RNVC: 9

28 Nov 2000

5120-99-443-3406

5120-99-196-7794

5120-99-401-2846
Shackle P Extractor

994012846
NO PRIMARY REF 99-401-2846: RNCC: 3 | RNVC: 2
866: RNCC: 5 | RNVC: 9
16C3074: RNCC: 6 | RNVC: 9

12 Jul 1979

5120-99-865-2269
Spanner Wrench

998652269
SSK/Y/581/00/0403/111: RNCC: 3 | RNVC: 2
001285088: RNCC: 5 | RNVC: 2

7 Feb 2008

5120-99-654-3069
Cone

996543069
P-890399-009: RNCC: 3 | RNVC: 2
P890399-009: RNCC: 5 | RNVC: 2

1 May 1980

5120-99-726-8284
Seal Tool

997268284
NO PRIMARY REF 99-726-8284: RNCC: 3 | RNVC: 2
HS-T 2040: RNCC: 5 | RNVC: 2
36FF7702898: RNCC: 6 | RNVC: 9

23 Aug 2005

5120-99-544-9183
Socket Wrench

995449183
K145-88-553: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-269-3593
Box Wrench

992693593
NO PRIMARY REF 99-269-3593: RNCC: 3 | RNVC: 2
KEN-582-1760K: RNCC: 5 | RNVC: 2
KEN-582-1760K: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-910-5478
Digging Pick Head

999105478
BS1421: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H1685: RNCC: 6 | RNVC: 9
H1685: RNCC: 6 | RNVC: 9
W8WA9683: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-623-7031
Vice Jaws

996237031
038801G: RNCC: 3 | RNVC: 2
344: RNCC: 5 | RNVC: 2

18 Aug 1999

5120-99-434-7294
Socket Wrench

994347294
BS2558: RNCC: 4 | RNVC: 1
F1FA17168: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-014-4271
Shaft Assembl Press

990144271
FV 2014745: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-714-4143
Mechanical Puller

997144143
PE16142: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-0405
Crimping To Locator

5120-99-130-0453

5120-99-646-1504

5120-99-652-4592

5120-99-406-2552
Clinching Pun Block

994062552
F6BLOCK2: RNCC: 3 | RNVC: 2
28FP449: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-114-1080
Wrench

991141080
519D131593D: RNCC: 3 | RNVC: 2

12 Feb 1999

5120-99-654-4013
Torque Wrench Adapter

996544013
460009283D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-611-6883
Adjustor

996116883
NO PRIMARY REF 99-611-6883: RNCC: 3 | RNVC: 2
Y45BA/1: RNCC: 5 | RNVC: 2
C581-LWM026394: RNCC: 6 | RNVC: 9

19 Jun 2001

5120-99-465-8656
Box Wrench

994658656
T77801: RNCC: 3 | RNVC: 2
PE50018: RNCC: 5 | RNVC: 2
64DE30: RNCC: 6 | RNVC: 9
64DE30: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-617-5368
Punch

996175368
HU22269: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-0783
Mechanical Puller

996170783
PE56316: RNCC: 3 | RNVC: 2
PE56316: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-735-0201
Packing Sleeve Set

997350201
ST13022: RNCC: 3 | RNVC: 2

19 Jan 1987

5120-99-130-0146

5120-99-104-6959
Hand Blind Riveter

991046959
TT4: RNCC: 3 | RNVC: 1
13085C4: RNCC: 5 | RNVC: 1
TT4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-254-1302
Syringe

992541302
430R: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-522-1622

5120-99-120-5716
Retaining Ri Pliers

991205716
7065MAJOR: RNCC: 3 | RNVC: 2
7065M: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-755-9707
Mechanical Puller

997559707
A.10793: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-923-1516
Crimping T Test Bar

5120-99-950-8117
Socket Wrench H Bar

5120-99-456-0398
Pressing Out Mandre

994560398
AO100278: RNCC: 3 | RNVC: 2
27A3504: RNCC: 6 | RNVC: 9
AO.100278: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-354-0701
Jacking Crad Collar

993540701
NLP25029: RNCC: 3 | RNVC: 2

5 Nov 2008

5120-99-469-1410
Torque Wrench Adapter

994691410
NTS9248: RNCC: 3 | RNVC: 2
5UA9111: RNCC: 6 | RNVC: 9
5UA9111: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-655-0333
Mechanical Puller

996550333
460009203C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-536-4167
Box Spanner

995364167
NR80933: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-536-5961
Open End Wrench

995365961
SNA1LPATZ: RNCC: 3 | RNVC: 1
Z: RNCC: 5 | RNVC: 1
024034: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-144-6093
Spanner Wrench

991446093
460001-682 PART 9: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-748-9040
Holding Tool

997489040
P5173 156930: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-776-3509
Spanner Wrench

5120-99-828-5210
Torque Wre Ring End

5120-99-827-0324

5120-99-722-0975
Socket Head Screw Key

997220975
Z03433 APPENDIX G: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-631-9203
Socket Head Screw Key

996319203
106A: RNCC: 3 | RNVC: 2
106A: RNCC: 6 | RNVC: 9
BHT6A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-812-2600
Spanner Wrench

998122600
701918: RNCC: 3 | RNVC: 2
CD701918: RNCC: 5 | RNVC: 2

24 Jun 1998

5120-99-904-8581
Torque Screwdriver

999048581
015923: RNCC: 3 | RNVC: 1
TLS1360 FH ESD: RNCC: 5 | RNVC: 1

9 Feb 2007

5120-99-812-4026
Ma Pinion Extractor

998124026
F51351: RNCC: 3 | RNVC: 2
LV3RRF51351: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-244-9075
Leveling-Support Jack

992449075
PJ030: RNCC: 3 | RNVC: 2

3 Apr 2002

5120-99-760-1080
Open End Wrench

997601080
T.10074-407: RNCC: 3 | RNVC: 2
T10074-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-734-6880
Bearing And Bushing Driver

997346880
460009510-C: RNCC: 3 | RNVC: 2
460009510C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-784-6070
Wrench Key

997846070
CESNKCS-04-6/1 1.1.17.2: RNCC: 3 | RNVC: 2

7 Jul 1984

5120-99-733-2734
Wire R Holding Tool

5120-99-448-7411
Spanner

994487411
NO PRIMARY REF 99-448-7411: RNCC: 3 | RNVC: 2
11A5837: RNCC: 5 | RNVC: 2

7 Jan 1981

5120-99-641-7977
Spanner Wrench

996417977
3924/63212: RNCC: 3 | RNVC: 2
B3924/63212: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-471-5021
Flat Tip Screwdriver

994715021
NO PRIMARY REF 99-471-5021: RNCC: 3 | RNVC: 2
166-4326: RNCC: 5 | RNVC: 2
T49125-040: RNCC: 5 | RNVC: 2

13 Aug 2009

5120-99-288-7014
Spanner Wrench

992887014
AITG-4951: RNCC: 3 | RNVC: 2
033MM-009: RNCC: 6 | RNVC: 9

25 Sep 2003

5120-99-719-7610
Wrench Spanner

997197610
4818: RNCC: 3 | RNVC: 9
6CT12: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-440-4345
Spanner Wrench

994404345
3174T000: RNCC: 3 | RNVC: 2

24 May 1995

5120-99-636-9458
Claw Spanner

996369458
21NR86241: RNCC: 3 | RNVC: 2
64NG50: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-2056
Craftsman's Tweezers

991362056
H6823: RNCC: 2 | RNVC: 2

25 Apr 1991

5120-99-130-0430
Crimping To Die Set

991300430
19571: RNCC: 3 | RNVC: 2
3A3681: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-805-6918
Drive Pin Punch

998056918
FV618095: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-811-8425
Hydraulic Adaptor

998118425
Y3J70876: RNCC: 3 | RNVC: 2

1 Jul 1997

5120-99-811-6807
Spanner Wrench

998116807
34947T: RNCC: 3 | RNVC: 2
LV1VSM34947T: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-814-7859
Valve Spring Compressor

998147859
399: RNCC: 3 | RNVC: 2
660220: RNCC: 5 | RNVC: 2
039900: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-030-9087
Socket Wrench Handle Bar

990309087
NR81225: RNCC: 3 | RNVC: 2

27 Feb 1991

5120-99-547-1183
Gen Extracting Tool

995471183
P5173916430: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-735-4289
Pliers

997354289
61: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-734-0025
Alignment Loca Tool

997340025
TL608075: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-735-7957
Open End Wrench

997357957
OPM 424: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-729-1263
Torque Wrench Adapter

997291263
G4: RNCC: 3 | RNVC: 2
B1607C: RNCC: 5 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

17 Sep 2008

5120-99-731-2157
Dowe Insertion Tool

997312157
FV2077332: RNCC: 3 | RNVC: 2
AT60031: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-728-7341
Tool Set

997287341
MBEU74744: RNCC: 3 | RNVC: 2

16 Feb 1994

5120-99-030-1478
Screwdriver

990301478
053 6017: RNCC: 3 | RNVC: 2

22 Jan 1996

5120-99-611-5831
Mechanical Puller

996115831
A0119457: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-0060
Socket Wrench Extension

991300060
E99: RNCC: 3 | RNVC: 2
E99: RNCC: 6 | RNVC: 9
1L174: RNCC: 6 | RNVC: 9
E99: RNCC: 6 | RNVC: 9
SES208X: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9
851693: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-500-9279
Tool Set

995009279
274386: RNCC: 3 | RNVC: 2

3 Jul 1998

5120-99-250-6998
Lamp Extractor

992506998
418/1/06603: RNCC: 3 | RNVC: 2
25621-01003: RNCC: 5 | RNVC: 2

12 Jan 1990

5120-99-988-4038
Protra Bending Tool

999884038
3201-83720: RNCC: 3 | RNVC: 2
3201-83720-01-3: RNCC: 5 | RNVC: 2
3201-83720-01-3-01: RNCC: 5 | RNVC: 2
3201-83720-LP-X-01: RNCC: 5 | RNVC: 2
UW333B: RNCC: 6 | RNVC: 9
MRI F83720: RNCC: 6 | RNVC: 9

7 Sep 1994

5120-99-789-7763
Punch

997897763
T522716/6: RNCC: 3 | RNVC: 2
CH748-2690-4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-256-4216
Adjusting Tool

992564216
DR3180-0034-DT: RNCC: 3 | RNVC: 2

16 Apr 1993

5120-99-429-4404
Ratc Retaining Tool

994294404
NO PRIMARY REF 99-429-4404: RNCC: 3 | RNVC: 2
N0DM6631-11: RNCC: 5 | RNVC: 2
603219: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-279-8752
Screwdriver Bit

992798752
SDM315A: RNCC: 3 | RNVC: 2
H24933: RNCC: 5 | RNVC: 2

6 Feb 2006

5120-99-727-4727
Terminal Crimping Tool Contact Positioner

997274727
294GB-5053: RNCC: 3 | RNVC: 9

8 May 2013

5120-99-726-0185
Extr Insertion Tool

997260185
SP3245: RNCC: 3 | RNVC: 2
1MEV5BV: RNCC: 6 | RNVC: 9

26 Nov 1999

5120-99-731-2176
Gear Rotati Adaptor

997312176
FV2090067: RNCC: 3 | RNVC: 2
AT61121: RNCC: 5 | RNVC: 2

15 Apr 1986

5120-99-300-4285
Hand Rivet Set

993004285
8040/0432/AC: RNCC: 3 | RNVC: 2

11 Feb 1992

5120-99-839-2652
Rear Hub An Adadtor

5120-99-975-2289

5120-99-840-3580
Claw Spanner

5120-99-456-0758
Bearing And Bushing Driver Plug

994560758
A0103047: RNCC: 3 | RNVC: 2
27A4509: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-787-5522
Crankshaft Replacer

997875522
PD170: RNCC: 3 | RNVC: 2
MF416: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-774-6659
Socket Wrench

997746659
HE 30 CU 18 TJ: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-891-6763
Torque Wrench Adapter

998916763
29759: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-99-895-7740
Socket Head Screw Key Set

998957740
363606784: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-895-8713
Socket Span Adaptor

998958713
FTSM8AL: RNCC: 3 | RNVC: 2
FTSM8AL: RNCC: 5 | RNVC: 2
FTSM8AL LOCK-ON: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-6613
Pipe Vise

999106613
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 5 | RNVC: 9
DL9A-H2979: RNCC: 5 | RNVC: 9
F1FA19549: RNCC: 6 | RNVC: 9
H2979: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-7407
Hand Shovel

991207407
UK/SC/3275-668: RNCC: 2 | RNVC: 2
668: RNCC: 6 | RNVC: 9
249375: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-532-1330
Seal Assembly Sleev

995321330
8001-9000: RNCC: 3 | RNVC: 2
PD4352-60: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-8224
Open End Box Wrench

991378224
RXH810S: RNCC: 3 | RNVC: 2
RXH810S: RNCC: 5 | RNVC: 2
RXH810S: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-437-5910
Spanner Wrench

994375910
TS1373: RNCC: 3 | RNVC: 2
0277-14864: RNCC: 6 | RNVC: 9
MN28: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-331-7816
Spanner Wrench

993317816
ST.70669: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-383-4300
Combination Box And Open End Wrench

993834300
RJM27: RNCC: 3 | RNVC: 2
H24660: RNCC: 5 | RNVC: 2

25 Jul 1994

5120-99-666-4535
Staking Tool

996664535
J83451: RNCC: 3 | RNVC: 2
0107B-22: RNCC: 6 | RNVC: 9

24 Feb 2001

5120-99-257-5724
Box Wrench

992575724
BUGGSIE 756: RNCC: 3 | RNVC: 2
756: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-772-9679
Spanner

997729679
102A505143-1: RNCC: 3 | RNVC: 2
102A505143DETA1L1: RNCC: 5 | RNVC: 2
102A505143-1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-782-2313

5120-99-136-9514
Insertion And Extra

991369514
C1ET20HDB: RNCC: 3 | RNVC: 2
H23655: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-974-2661
Socket Head Screw Key Set

999742661
TME412: RNCC: 3 | RNVC: 2

1 Apr 2009

5120-99-496-0795
Leveling-Support Jack

994960795
VLA2001: RNCC: 3 | RNVC: 2
1MEVGSN: RNCC: 6 | RNVC: 9

18 Jul 2004

5120-99-973-2868
Bearing Bush Arbor

999732868
708040: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-898-5012
Panel Pin Extractor

998985012
BB30: RNCC: 3 | RNVC: 2
FL000M60120: RNCC: 6 | RNVC: 9

22 Aug 2000

5120-99-891-6418
Drift

998916418
1535: RNCC: 3 | RNVC: 2
35: RNCC: 5 | RNVC: 1

13 Nov 1990

5120-99-137-0416
Plier Tool

991370416
41-9008: RNCC: 3 | RNVC: 2
33C80001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-459-0602
Withdr Slip Adaptor

994590602
HW17075: RNCC: 3 | RNVC: 2
64VV1589: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-841-3136
Wrench Extension Handle

998413136
T-13261: RNCC: 3 | RNVC: 2
CV153064: RNCC: 5 | RNVC: 2
T-13261: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-924-2865
Stuffing Box And Pump Packing Extractor

999242865
PA.100078: RNCC: 3 | RNVC: 2
116388-4: RNCC: 6 | RNVC: 9
0275-275008: RNCC: 6 | RNVC: 9
0275-924-2865: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-989-6111
Removal Tool Assemb

999896111
00832/AS/035944: RNCC: 3 | RNVC: 2
00832/GA/035933 ITEM 5: RNCC: 5 | RNVC: 2
00832/GA/035933/5: RNCC: 5 | RNVC: 2

25 Aug 2000

5120-99-734-6400
Drive Pin Punch

997346400
WN453035-U: RNCC: 3 | RNVC: 2
WN453035U: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-411-9052
Key Spanner

994119052
NO PRIMARY REF 99-411-9052: RNCC: 3 | RNVC: 2
ST2134: RNCC: 5 | RNVC: 9
27Q15951: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-9175
Ratchet Wheel

997109175
NO PRIMARY REF 99-710-9175: RNCC: 3 | RNVC: 2
15-83: RNCC: 5 | RNVC: 2
15-83: RNCC: 5 | RNVC: 2
15-8083: RNCC: 5 | RNVC: 2
29-7: RNCC: 5 | RNVC: 2
15-8083: RNCC: 5 | RNVC: 2
210-150502: RNCC: 6 | RNVC: 9
210-372708: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-396-4566
Torque Wrench Adapter

993964566
29895: RNCC: 3 | RNVC: 2

25 Aug 2005

5120-99-448-3843
Seal Inserter

994483843
MC1248162: RNCC: 3 | RNVC: 2

31 Jan 2011

5120-99-700-1966
Socket Wrench Handle

997001966
SSD212: RNCC: 3 | RNVC: 2
AKDSSD212: RNCC: 5 | RNVC: 2
FB193932: RNCC: 5 | RNVC: 2
PE15511: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-604-6414
Socket Wrench Socket

996046414
F303094: RNCC: 3 | RNVC: 2
F303094: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-833-0231
Alignment Pin Kit

998330231
CBD20006K01: RNCC: 3 | RNVC: 2

19 Dec 2001

5120-99-541-9191
Torque Wrench

995419191
TB100: RNCC: 3 | RNVC: 2
91611312: RNCC: 5 | RNVC: 2
TB100: RNCC: 5 | RNVC: 2
9002-1284-4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-533-9613
Actuator Assembly T

995339613
JX50041-358: RNCC: 3 | RNVC: 2

21 May 1991

5120-99-665-6642
S Pro Link Adapter

996656642
17229214-0: RNCC: 3 | RNVC: 2
J 4266-90: RNCC: 5 | RNVC: 2
17229214-0: RNCC: 5 | RNVC: 2
021JB-018: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-552-6536

5120-99-522-1961

5120-99-561-3192

5120-99-359-4520
Torque Wrench

993594520
024120: RNCC: 3 | RNVC: 2

15 Apr 2005

5120-99-465-8644
Socket Wrench

994658644
PE4617: RNCC: 3 | RNVC: 2
64BC25: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-560-5314
Socket Wrench Socket

995605314
UWA14: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-777-0891
Socket Wrench Socket

997770891
GH2125: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-776-6604
Drive Handle

997766604
GA5101: RNCC: 3 | RNVC: 2
21825639: RNCC: 5 | RNVC: 2
GA5101: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-764-3412
Magneto Spanner Set

997643412
L459: RNCC: 3 | RNVC: 2
488-500: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-747-2378
Torq Top Locks Tool

997472378
MBEU59034: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-777-4446
Socket Wrench Socket

997774446
SIMMLM300: RNCC: 3 | RNVC: 2
SIMM300: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-752-4453
Plunger Seal Driver

997524453
971003: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-746-5455
Hydraulic Jack Handle

997465455
21459: RNCC: 3 | RNVC: 2
LE21459: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-785-7762
Drive Tool Set

997857762
NET777: RNCC: 3 | RNVC: 2

28 Jan 1985

5120-99-627-9032
Box Wrench

996279032
3954149: RNCC: 3 | RNVC: 2
1589607: RNCC: 5 | RNVC: 9

27 Nov 1998

5120-99-654-4078
Mechanical Puller

996544078
460009172D: RNCC: 3 | RNVC: 2

26 Apr 1980

5120-99-105-7417
Pike Pole

991057417
C1ESSM5528: RNCC: 3 | RNVC: 2
Y1YA1522: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-702-6291
Setting Tool

997026291
999 8105: RNCC: 3 | RNVC: 2
FH980420125: RNCC: 6 | RNVC: 9

26 Jun 1998

5120-99-803-0267
Socket Wrench Handle Bar

998030267
FV232638: RNCC: 3 | RNVC: 2
LV6MT278137: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-3600
Spanner Wrench

998103600
TGA887: RNCC: 3 | RNVC: 2
LV1DBTGA887: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-811-8849
Spanner Wrench

998118849
FV 2226749: RNCC: 3 | RNVC: 2

18 Feb 1998

5120-99-811-6815
Spanner Wrench

998116815
FV 13679: RNCC: 3 | RNVC: 2
39684T: RNCC: 5 | RNVC: 2
39684T: RNCC: 5 | RNVC: 2
LV1VSM39684T: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-250-6335
Oxywarn 10 Tool Kit

992506335
4201677: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-427-9219
Spanner Wrench

994279219
87-7326-1: RNCC: 3 | RNVC: 2
3A3601: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-119-6929
Extracting Tool

991196929
NO PRIMARY REF 99-119-6929: RNCC: 3 | RNVC: 2
AL16207: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-560-1778
Pliers

995601778
NO PRIMARY REF 99-560-1778: RNCC: 3 | RNVC: 2
A161-61N: RNCC: 5 | RNVC: 2
PA161-6: RNCC: 5 | RNVC: 2
T2FC2545: RNCC: 5 | RNVC: 2
01-2235-7: RNCC: 5 | RNVC: 2
4410-61N: RNCC: 5 | RNVC: 2

3 Sep 1981

5120-99-021-8860
Tube Bending Spring

990218860
BS-10: RNCC: 3 | RNVC: 2
75028: RNCC: 5 | RNVC: 2

20 Jun 1994

5120-99-527-7764
Screwdriver Bit

995277764
B33372-11: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-402-0967
Nipple Forming Tool

994020967
NO PRIMARY REF 99-402-0967: RNCC: 3 | RNVC: 2
ET078: RNCC: 5 | RNVC: 2
24351: RNCC: 5 | RNVC: 2
16C3395: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-391-9128
Support Tool

993919128
S14-94-1234 51/6: RNCC: 3 | RNVC: 2

5 Apr 2005

5120-99-654-3007
Mechanical Puller

996543007
P-890262-407: RNCC: 3 | RNVC: 2
P890262-407: RNCC: 5 | RNVC: 2

10 May 1980

5120-99-120-6019
Box Wrench

991206019
PBCB1103: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-718-3378
Box Wrench

997183378
2RB3743: RNCC: 3 | RNVC: 2
H21897: RNCC: 5 | RNVC: 2
T2AH2009: RNCC: 5 | RNVC: 2
PE15360: RNCC: 5 | RNVC: 2
BS3555: RNCC: 6 | RNVC: 9
64BC13: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-728-4926
Glass Remover

997284926
KM2063: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-911-1029
Socket Wrench

5120-99-269-2056
Special Spanner

992692056
110079-15165: RNCC: 3 | RNVC: 2
26VC-95628: RNCC: 6 | RNVC: 9

18 Aug 2004

5120-99-428-4566

5120-99-973-5178
Nose Adaptor

5120-99-427-7561

5120-99-392-5349
Torque Wrench Adapter

993925349
52237A6: RNCC: 3 | RNVC: 2

4 Oct 2006

5120-99-930-2508
Con Finishing Float

5120-99-968-0020
Cartridge Extractor

5120-99-428-7616

5120-99-425-7302
Seal Inserter

994257302
MC1270251: RNCC: 3 | RNVC: 2

29 Aug 2002

5120-99-608-3524
Socket H Wrench Key

996083524
SF17089: RNCC: 3 | RNVC: 2
FL9707M0018: RNCC: 6 | RNVC: 9

5 Jun 1997

5120-99-168-5099
Gap Gauge

991685099
SP56446: RNCC: 3 | RNVC: 2
123276ST: RNCC: 6 | RNVC: 9

8 Mar 1990

5120-99-802-5866
Mechanical Puller

998025866
FV590017: RNCC: 3 | RNVC: 2
RS416: RNCC: 5 | RNVC: 2
T607: RNCC: 5 | RNVC: 2

11 Dec 1980

5120-99-814-8277
Box Wrench

998148277
FV 210469: RNCC: 3 | RNVC: 2
LV9AHYFV210469: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-748-7501
Face Spanner Wrench Socket

997487501
2204T405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-722-8212
Nutspinner

997228212
4555: RNCC: 3 | RNVC: 2
76781H: RNCC: 5 | RNVC: 2

8 Jun 1988

5120-99-722-9100
Multi Socket Wrench

997229100
FV 2024046: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-99-954-2110
Lamp Extractor

999542110
TT11: RNCC: 3 | RNVC: 2
E81540: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-795-5421
Spanner

997955421
T10183: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-838-4869
Quick Adjusting Screw Clamp

998384869
FV994066: RNCC: 3 | RNVC: 2

25 Sep 1981

5120-99-509-7934
Socket Wrench

995097934
PN00019339: RNCC: 3 | RNVC: 2

5 Sep 2012

5120-99-124-3912
Open End Wrench

991243912
0SA270: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-2896
Socket Wrench Socket

991382896
F281: RNCC: 3 | RNVC: 2
F281: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-735-7964
Open End Wrench

997357964
OPM 450: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-750-7383
Face Spanner Wrench Socket

997507383
1802T407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-731-2167
Cup Insertion Tool

997312167
FV2077386: RNCC: 3 | RNVC: 2
AT60089: RNCC: 5 | RNVC: 2

9 May 1986

5120-99-747-4770
Press Gauge Adadtor

997474770
HY16: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-749-5593
Leveling-Support Jack

997495593
PE25008: RNCC: 3 | RNVC: 2

11 May 2010

5120-99-771-1810
Spanner Wrench

997711810
FV 1074825: RNCC: 3 | RNVC: 2
P23L586T41: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-771-9659
Fi Open-Jaw Spanner

997719659
H22356: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-785-7416
High Tube Extractor

997857416
L3C60757: RNCC: 3 | RNVC: 2
L3C60575: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-075-6959
Assembly Tongs

990756959
FV 2112940: RNCC: 3 | RNVC: 2

13 Oct 1989

5120-99-526-4496
Torque Wrench

995264496
TORQUEMASTER MINOR: RNCC: 3 | RNVC: 2
TORQUEMASTER: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-145-0980
Socket Wrench Crowfoot Attachment

991450980
A0114493: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-748-5728
Holding Block

997485728
75A430670/AFT3: RNCC: 3 | RNVC: 2
75A430670-1000/AFT3: RNCC: 5 | RNVC: 2
GT3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-6643

5120-99-422-2101

5120-99-300-8351
Bearing Extractor

5120-99-422-2094

5120-99-422-2088

5120-99-738-9420
Tool Torque

997389420
NO PRIMARY REF 99-738-9420: RNCC: 3 | RNVC: 2
5641680: RNCC: 5 | RNVC: 2
C574-LWM040644: RNCC: 6 | RNVC: 9

21 Jun 2001

5120-99-710-4970
Open Jaw Spann Head

997104970
NO PRIMARY REF 99-710-4970: RNCC: 3 | RNVC: 2
PE16089: RNCC: 5 | RNVC: 9

28 May 1970

5120-99-577-2449
Spanner Wrench

995772449
MBJ31074-407: RNCC: 3 | RNVC: 2
B/MBJ31074-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-658-3533
Craftsman's Tweezers

996583533
05-2233-20: RNCC: 3 | RNVC: 2
05734-00436: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-567-4222
Peening Tool

995674222
PT1307667: RNCC: 3 | RNVC: 2
0625P-248: RNCC: 6 | RNVC: 9
062CE-119: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-251-0861
Injector Extractor

992510861
26.545.9309.00: RNCC: 3 | RNVC: 2
106529: RNCC: 5 | RNVC: 2
26.545.9309.00: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-439-6702
Hand Screw Jack

994396702
A1506: RNCC: 3 | RNVC: 2

3 Jun 1993

5120-99-122-4816
Socket Wrench Extension

991224816
KPS2: RNCC: 3 | RNVC: 1
T2EC3306: RNCC: 5 | RNVC: 2
1700050: RNCC: 5 | RNVC: 2
1224816: RNCC: 5 | RNVC: 2
1L552: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-769-1468

5120-99-617-5946
Mechanical Puller

996175946
HU 24296: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-192-2556
Tool

991922556
800861T3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-214-2854
Crankshaft Rear Oil

992142854
PD145A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-795-1311
Intert Ratchet Tool

997951311
FV 3024658: RNCC: 3 | RNVC: 2

12 Aug 1994

5120-99-792-9667
Mechanical Puller

997929667
ST106: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-792-9665
Mechanical Puller

997929665
ST104: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-554-5493
Oil Injecto Adaptor

995545493
Y3J70875A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-716-8096
Socket Wrench

997168096
Y2DA70942: RNCC: 3 | RNVC: 2
360-365894: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-717-1398
Extractor

997171398
T318510: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-810-1716
Mechanical Puller

998101716
PE 59874: RNCC: 3 | RNVC: 2
64DE2517656: RNCC: 6 | RNVC: 9

18 Jun 1991

5120-99-793-3101
Starter Rotor Stand

997933101
S7: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-721-9367
Location Tube

997219367
460009299-3: RNCC: 3 | RNVC: 2
460009299DETAIL3: RNCC: 6 | RNVC: 9

24 Jan 1986

5120-99-714-9511
Socket Head Screw Key

997149511
TL3201: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-103-8926

5120-99-771-9337
Torque Wrench Adapter

997719337
217002: RNCC: 3 | RNVC: 2

3 Apr 1997

5120-99-767-7262
Drain Plug Wrench

997677262
RETS1975: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-130-1614
Socket Head Screw Key

991301614
MS7: RNCC: 3 | RNVC: 2
MS7: RNCC: 5 | RNVC: 2
1C8083: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-663-7984
Special Tool

5120-99-940-4123
Mechanical Puller

999404123
PE56810: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-900-1146
Socket Wrench

999001146
CM8936: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-895-4156
Socket Wrench Screwdriver Attachment

998954156
HU30882: RNCC: 3 | RNVC: 2

8 Jul 2003

5120-99-874-6382
Screw Thread Insert Inserter

998746382
ST1103: RNCC: 3 | RNVC: 2

3 Aug 2009

5120-99-880-0225
Torque Tool

998800225
110079SHT781: RNCC: 3 | RNVC: 2
26VC-95115: RNCC: 6 | RNVC: 9

6 Oct 2004

5120-99-395-9275
Hand Screw Jack

993959275
12031 C: RNCC: 3 | RNVC: 2
12031 FIG C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-222-8054
Seal Inserter

992228054
EA6305G548-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-742-3601
Spanner Wrench

997423601
NO PRIMARY REF 99-742-3601: RNCC: 3 | RNVC: 2
W1279 TOOL NO 2: RNCC: 5 | RNVC: 2
W1279 TOOL NO 2: RNCC: 5 | RNVC: 9

11 Feb 2011

5120-99-773-4531
Restraining Wrench

997734531
01TC14119: RNCC: 3 | RNVC: 2
01T-C-14119: RNCC: 5 | RNVC: 2
01TC14119: RNCC: 6 | RNVC: 9

18 Oct 1983

5120-99-768-0660
Flat Tip Screwdriver

997680660
11A3/101653 ISSUE 1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-397-4544
Thre Anchor-Adaptor

993974544
A0/1000/1/4 BSF-D: RNCC: 3 | RNVC: 2
GSIPTGAMC6AB190406TURNEX: RNCC: 6 | RNVC: 9

7 Jun 2006

5120-99-194-7783
Torque Wrench

991947783
TBN2 AND 012165: RNCC: 3 | RNVC: 2
TBN2 AND 012165: RNCC: 5 | RNVC: 2
MCP24B: RNCC: 6 | RNVC: 9

21 Jan 2000

5120-99-503-9128
Sander Block

995039128
SB280: RNCC: 3 | RNVC: 2

23 Apr 2012

5120-99-131-1643
Slipring Ad Spanner

991311643
S1988: RNCC: 3 | RNVC: 2
SM765A: RNCC: 6 | RNVC: 9

20 Dec 1996

5120-99-395-9209
Air Handling Device

993959209
PC25459: RNCC: 3 | RNVC: 2
PC25459: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-460-4056
Mandrel

994604056
PE51684: RNCC: 3 | RNVC: 2
64DE1014: RNCC: 6 | RNVC: 9
64DE1014: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-820-0199
Hand Terminal Crimping Tool

998200199
DHC50H: RNCC: 3 | RNVC: 2
DHC50H: RNCC: 5 | RNVC: 2
NPPOGAMA4B3/091204: RNCC: 6 | RNVC: 9

21 Dec 2004

5120-99-701-1155
Screwdriver

997011155
CE7259ASHT2/32: RNCC: 3 | RNVC: 2

22 Jul 1991

5120-99-520-5282
Open End Wrench

995205282
28: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-108-4534
Socket Head Screw Key

991084534
W1: RNCC: 3 | RNVC: 2
7362: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-392-5359
Spatula

993925359
MBEU192435: RNCC: 3 | RNVC: 2

20 Nov 2007

5120-99-290-5889
Adjustment Bar

992905889
A1129001-CL: RNCC: 3 | RNVC: 2

22 Mar 2001

5120-99-122-5123
Socket Wrench Socket

991225123
KSDH261: RNCC: 3 | RNVC: 2
T2BJ5265: RNCC: 5 | RNVC: 2
1700024: RNCC: 5 | RNVC: 2
1L505: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-5403
Extract Drill Guide

991225403
RTJ0F312: RNCC: 3 | RNVC: 2
1C8091: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-427-3470
Pin Removal Tool

994273470
0411-240-2005: RNCC: 3 | RNVC: 2
99-08-526: RNCC: 5 | RNVC: 2
034HR-007: RNCC: 6 | RNVC: 9

3 Dec 2003

5120-99-837-8341
Hydraulic Jack Handle

998378341
M08G307-36AHANDLE: RNCC: 3 | RNVC: 2
5039227: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-932-7109
Parallel Punch Pin

999327109
NO PRIMARY REF 99-932-7109: RNCC: 3 | RNVC: 2
161DD: RNCC: 5 | RNVC: 2

11 Dec 1995

5120-99-825-6746
Da Dismantling Tool

998256746
NO PRIMARY REF 99-825-6746: RNCC: 3 | RNVC: 2
MF304: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-830-7368
Oil Seal Repl Plate

998307368
NO PRIMARY REF 99-830-7368: RNCC: 3 | RNVC: 2
6999028: RNCC: 5 | RNVC: 2

27 Jul 1990

5120-99-422-2604

5120-99-421-3397

5120-99-456-0731
Bea Extractor Plate

994560731
NO PRIMARY REF 99-456-0731: RNCC: 3 | RNVC: 2
A0103044: RNCC: 5 | RNVC: 2
27A4467: RNCC: 6 | RNVC: 9

20 Jun 1977

5120-99-527-2299
Connec Holding Tool

995272299
NO PRIMARY REF 99-527-2299: RNCC: 3 | RNVC: 2
B40156: RNCC: 5 | RNVC: 2
562833: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-446-3848
Shimming Plate

994463848
90890-06701: RNCC: 3 | RNVC: 2
100571: RNCC: 5 | RNVC: 2
90890-06701: RNCC: 5 | RNVC: 2

12 Feb 1996

5120-99-131-6951
Straight And Offset Cross Tip Screwdriver Set

991316951
1-67-576: RNCC: 3 | RNVC: 2
302-041879: RNCC: 5 | RNVC: 2
815-492: RNCC: 5 | RNVC: 2

28 Jul 2003

5120-99-254-4395
Torquebre Extension

992544395
C6449B 9/16: RNCC: 3 | RNVC: 2
1C-8786: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-719-2921
Block

997192921
PE54334DET8: RNCC: 3 | RNVC: 2
0852 2317: RNCC: 5 | RNVC: 2
8522317: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-2267
Socket Wrench Socket

991242267
AB469: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-970-5439

5120-99-124-3002
Box Wrench

991243002
SFA542: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-3979
T Crimping Tool Die

991383979
29263: RNCC: 3 | RNVC: 2
HT29020: RNCC: 6 | RNVC: 9
506G0001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-7364
Socket Wrench Socket

991377364
PHH1000: RNCC: 3 | RNVC: 2
PHH1000: RNCC: 5 | RNVC: 2
PHH1000: RNCC: 6 | RNVC: 9
1L613: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-725-5014
Pres Snap Connector

997255014
892/00173: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-0763
Con Extraction Tool

991240763
294-203: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-179-9733
Screwdriver Set

991799733
SEM7/S: RNCC: 3 | RNVC: 2
H24672: RNCC: 5 | RNVC: 2

21 Jul 1994

5120-99-720-8649
Socket Wrench Handle Bar

997208649
460009346-7: RNCC: 3 | RNVC: 2

28 Aug 1991

5120-99-451-1325
Seat Spanner

994511325
T.R.109: RNCC: 3 | RNVC: 2
B T.R.109: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-465-4005
Bench Safety Can

994654005
1A4426: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-401-3588
Clutch Ali Mandrels

994013588
37: RNCC: 3 | RNVC: 2
AST3247: RNCC: 5 | RNVC: 2
013700: RNCC: 5 | RNVC: 2
16C6510: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-435-6446
Screwdriver Bit Set

994356446
4090: RNCC: 3 | RNVC: 2
H24204: RNCC: 5 | RNVC: 2

2 Dec 1992

5120-99-467-6746
Socket Spanner

994676746
MK16908: RNCC: 3 | RNVC: 2
37F13285: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-144-6840
Seal Sleeve

991446840
460002149: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-027-0953
Socket Wrench Adapter

990270953
A1UBA: RNCC: 3 | RNVC: 2
24-6780: RNCC: 5 | RNVC: 2
UWS3B1B: RNCC: 6 | RNVC: 9
FG953R50005: RNCC: 6 | RNVC: 9

17 Nov 1995

5120-99-423-4595
Spanner Wrench

994234595
AS510353: RNCC: 3 | RNVC: 2
558575: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-252-4818
Torque Wrench

992524818
015140: RNCC: 3 | RNVC: 2
MINOR MALE: RNCC: 5 | RNVC: 1
1C/8626: RNCC: 6 | RNVC: 9
UW214A3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-701-9591
Clip Extractor

5120-99-640-4004
Socket Wrenc Socket

5120-99-449-4139
Spanner Wrench

994494139
BB60903/29: RNCC: 3 | RNVC: 2
NU/0/1904/0/001: RNCC: 5 | RNVC: 2

6 Mar 1995

5120-99-608-9596
Aligning Tool

996089596
110079SHT861: RNCC: 3 | RNVC: 2
26VC-95165: RNCC: 6 | RNVC: 9

7 Oct 2004

5120-99-456-2112
Hand Tube Bender Set

994562112
F1FA19374: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-421-8296
Machinist's Vise

994218296
REC0RDV1CE0: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT21: RNCC: 4 | RNVC: 1
954-3350: RNCC: 5 | RNVC: 2
RECORDNO0: RNCC: 5 | RNVC: 2
0633-192716: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-4702
Tool Set

994224702
NO PRIMARY REF 99-422-4702: RNCC: 3 | RNVC: 2
N52188-16: RNCC: 5 | RNVC: 2
N49743REV1SED1TEM16: RNCC: 5 | RNVC: 9
88604-606-131: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-787-1696
Torque Wrench

5120-99-825-5497
Pressure Test Block

998255497
V1029-1: RNCC: 3 | RNVC: 2

27 Jun 1979

5120-99-423-0704

5120-99-609-5326

5120-99-523-4865
Open End Wrench

995234865
26754: RNCC: 3 | RNVC: 2
SR558070: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-601-8066
Puller

996018066
142710: RNCC: 3 | RNVC: 2
FH9800S0006: RNCC: 6 | RNVC: 9

6 Feb 1998

5120-99-709-1484
Mechanical Puller

997091484
MC1269080: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-693-0830
Socket Wrench Socket

996930830
NM58A: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-533-5852
Winding Tool

995335852
2595546: RNCC: 3 | RNVC: 2
532670: RNCC: 6 | RNVC: 9

24 Jun 1980

5120-99-654-3967
Mechanical Puller

996543967
460009131D: RNCC: 3 | RNVC: 2

28 Mar 1980

5120-99-215-6084
Bearing Equip Front

5120-99-724-4977

5120-99-716-8283
Torque Wrench Adapter

997168283
1H12-63-13: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-979-1828
Differentia Adaptor

999791828
9519: RNCC: 3 | RNVC: 2
052ND-008: RNCC: 6 | RNVC: 9

1 Aug 2005

5120-99-146-2933
Bea Installer Plate

991462933
S6170-35012-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-742-0254
Extractor Tool

997420254
H73192-01-ST ITEM 3: RNCC: 3 | RNVC: 2
H73192-01-ST-3: RNCC: 5 | RNVC: 2
H73192-01-ST/3: RNCC: 5 | RNVC: 2

9 May 2001

5120-99-102-3678
Box Wrench

991023678
B16363: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-6422
Retaining Ring Pliers

997106422
ISS: RNCC: 3 | RNVC: 2
317-53: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-547-9151
Craftsman's Tweezers

995479151
SM116SA: RNCC: 3 | RNVC: 2
SM116SA: RNCC: 5 | RNVC: 2

21 Dec 1994

5120-99-500-9016
Torque Wrench

995009016
14001: RNCC: 3 | RNVC: 2
550: RNCC: 5 | RNVC: 2

12 May 1998

5120-99-863-4642
Piston Ring Compressor

998634642
A1032006: RNCC: 3 | RNVC: 2
C201515: RNCC: 5 | RNVC: 2

4 Apr 2001

5120-99-863-1780
Socket Wrench Adapter

998631780
AS 00001: RNCC: 3 | RNVC: 2

29 Sep 2011

5120-99-910-5977
Box Wrench

999105977
BS3555: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-883-3271
Socket Wrench Socket

998833271
MBEU162329: RNCC: 3 | RNVC: 2

10 Dec 2003

5120-99-874-1718
Rear Hu Nut Spanner

998741718
18G258: RNCC: 3 | RNVC: 2
18G258A: RNCC: 5 | RNVC: 2
LV7ML18G258: RNCC: 6 | RNVC: 9
16C6275: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-239-2125
Face Spanner Wrench Socket

992392125
100C071261: RNCC: 3 | RNVC: 2
001UY-075: RNCC: 6 | RNVC: 9

7 Sep 2000

5120-99-104-4442
Mechanical Puller

5120-99-204-4060

5120-99-745-8366
Box Wrench

997458366
D72858: RNCC: 3 | RNVC: 2
S538: RNCC: 5 | RNVC: 1
H363-257192: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-4416
Access Pin Inserter

997104416
NO PRIMARY REF 99-710-4416: RNCC: 3 | RNVC: 2
PE8782: RNCC: 5 | RNVC: 9

15 Nov 1973

5120-99-783-1590
Box Wrench

5120-99-901-4196

5120-99-545-2716
Spanner Attachment

995452716
0THM10: RNCC: 3 | RNVC: 2
39061-2: RNCC: 5 | RNVC: 2
29844: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-666-1411
Mechanical Puller

996661411
01TC16126: RNCC: 3 | RNVC: 2
01TC16126: RNCC: 5 | RNVC: 2

17 Apr 2004

5120-99-902-2246
Cardan Co Extractor

999022246
LC114C: RNCC: 3 | RNVC: 2

8 Oct 1993

5120-99-438-6017
Spanner Wrench

5120-99-401-3221

5120-99-438-5916

5120-99-438-6012
Bal Assembly Tackle

5120-99-264-0739
Open End Wrench

992640739
PED/ACP/2306 SHEET 007: RNCC: 3 | RNVC: 2
A44250: RNCC: 5 | RNVC: 1
15241141: RNCC: 5 | RNVC: 2
PED/ACP/2306 ITEM 107: RNCC: 5 | RNVC: 2
PED/ACP/2306/007: RNCC: 5 | RNVC: 2
PED/ACP/2306/107: RNCC: 5 | RNVC: 2

12 Mar 2009

5120-99-840-2700
Spanner

998402700
413/LO: RNCC: 3 | RNVC: 2
SPEED BRACE 0.250 S/P LO DRIVER: RNCC: 6 | RNVC: 9

29 Jun 1993

5120-99-138-5999
Open Jaw Fi Spanner

5120-99-138-6914

5120-99-146-4099

5120-99-822-4159
Socket Wrenc Socket

5120-99-769-5227
Seal Inserter

997695227
J21359: RNCC: 3 | RNVC: 2

14 Mar 1984

5120-99-768-2447
Mechanical Puller

997682447
63375181: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-3012
Press Dolly

997693012
AP57797: RNCC: 3 | RNVC: 2
112768ST: RNCC: 5 | RNVC: 2
FV1048049: RNCC: 5 | RNVC: 2

14 Mar 1984

5120-99-944-1477
Electrical Contact Remover

999441477
ANS4: RNCC: 3 | RNVC: 2
1H-377: RNCC: 6 | RNVC: 9
1H377: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-3756
Unlocking Tool And

996073756
UT1097-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-214-8489

5120-99-419-0843

5120-99-798-1713
Flat Tip Screwdriver

997981713
H21943: RNCC: 1 | RNVC: 2
2006: RNCC: 3 | RNVC: 1

23 Jul 1985

5120-99-253-6178
Positioner

992536178
DCE.91.092.BVC: RNCC: 3 | RNVC: 2
DCE.91.092.BVC: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-433-2746
Hand Storage Battery Carrier

994332746
47526: RNCC: 3 | RNVC: 2

6 Feb 2007

5120-99-774-9642
Mechanical Handle

997749642
JS 1118-03X: RNCC: 3 | RNVC: 2
BW 207756: RNCC: 5 | RNVC: 2
JS 1118-03X: RNCC: 5 | RNVC: 2

26 Feb 1992

5120-99-887-4177
Face Spanner Wrench Socket

998874177
9R0-2671/01: RNCC: 3 | RNVC: 2

11 Dec 2013

5120-99-853-3565
Bearing And Bushing Inserter

998533565
ME00171-025-24H ITEM 1021: RNCC: 3 | RNVC: 2
ME00171-025-24H-1021: RNCC: 5 | RNVC: 2

5 Nov 1996

5120-99-609-5840
Socket Wrench Handle Bar

996095840
299510: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-714-5865

5120-99-954-9602

5120-99-784-8491

5120-99-949-5271
Jaw Cable Grip

5120-99-978-4939

5120-99-229-4616
Cramp Set

992294616
12655: RNCC: 3 | RNVC: 2
12655: RNCC: 5 | RNVC: 2
NPPOGAMA4/271103/INSSMWXXXXX: RNCC: 6 | RNVC: 9
034G8-009: RNCC: 6 | RNVC: 9

11 Dec 2003

5120-99-227-2601
Inde Piston Remover

992272601
062004/5/6: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-461-8222
Tool Extraction

994618222
A0109348: RNCC: 3 | RNVC: 2
27G3527: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-709-0860
Insert Tool

997090860
A03781: RNCC: 3 | RNVC: 2

11 Dec 1996

5120-99-761-7910
Adaptor

5120-99-810-4602

5120-99-815-1850

5120-99-775-6151

5120-99-778-7465
Grover Pin Punch

5120-99-831-8886

5120-99-469-8317

5120-99-139-5108
Kerosene Blowtorch

991395108
400-1PINT: RNCC: 3 | RNVC: 2
25013: RNCC: 6 | RNVC: 9
1B5996: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-773-4110
Adjustable Wrench

997734110
NO PRIMARY REF 99-773-4110: RNCC: 3 | RNVC: 2
541-6595: RNCC: 5 | RNVC: 2
WB1902: RNCC: 5 | RNVC: 2
0287-0817: RNCC: 5 | RNVC: 9
MGWS42A: RNCC: 6 | RNVC: 9

21 May 2008

5120-99-797-4138
Socket Head Screw Key

997974138
703-18-3-12204/2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-609-1632
Bal Extraction Tool

996091632
NO PRIMARY REF 99-609-1632: RNCC: 3 | RNVC: 2
NTS12079: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-122-5090

5120-99-127-5722

5120-99-530-0493
Wrench Spanner

995300493
NKF759: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-6066
Spanner

994656066
1C7925: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-6756
Spanner Wrench

994656756
T77841: RNCC: 3 | RNVC: 2
PE50035: RNCC: 5 | RNVC: 2
64DE45: RNCC: 6 | RNVC: 9
64DE45: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-953-8166

5120-99-953-6383

5120-99-714-5844

5120-99-702-1388
Pilot Bearing Tool

5120-99-523-3393

5120-99-970-2098

5120-99-714-6241

5120-99-869-3220
Nut Spinner

998693220
BS4006-TABLE 4 4.50MM: RNCC: 4 | RNVC: 1
TABLE 4: RNCC: 6 | RNVC: 9

25 May 1995

5120-99-726-6730
Rawhide Mallet

997266730
01-016: RNCC: 3 | RNVC: 2
011616: RNCC: 5 | RNVC: 2
01-016: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-771-8873
Socket Wrench Socket

997718873
ED937: RNCC: 3 | RNVC: 2
1050/8.1: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-226-0990
Socket Head Screw Key

992260990
KSISC046-1: RNCC: 3 | RNVC: 2

20 Jul 2010

5120-99-700-2504
Tooth Ring Spanner

997002504
MBEU7202-2: RNCC: 3 | RNVC: 2

25 Apr 1991

Load More Results