What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 34 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 34 of 108

5120-99-252-8613
Extraction Tool

992528613
35707-DGL: RNCC: 3 | RNVC: 2

13 Mar 2004

5120-99-130-2005
Pull Head Universal

991302005
H615B6U: RNCC: 3 | RNVC: 2
H615B6U: RNCC: 5 | RNVC: 2
H615B6U: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-5021
Socket Wrench Screwdriver Attachment

991365021
H6849: RNCC: 2 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
K7C-M50-2.5MM: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-463-4985
Barring Lever Assem

994634985
001293058: RNCC: 3 | RNVC: 2
Y/320/20/A043/000: RNCC: 5 | RNVC: 1
TX 3439212: RNCC: 5 | RNVC: 2
SST/Y/320/20/A043/000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-384-0842
Forming Ring Seal

993840842
MC1269067: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-538-6416
Extractor Assembly

995386416
NO PRIMARY REF 99-538-6416: RNCC: 3 | RNVC: 2
F45301: RNCC: 5 | RNVC: 2
CF45301: RNCC: 5 | RNVC: 2
H454-538-6416: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-840-0781
Sock Wrench Key Set

5120-99-466-8603
Extractor Assembly

994668603
ST2394: RNCC: 3 | RNVC: 2
27Q19150: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-6956
Box Wrench

991396956
Y277: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-438-6055

5120-99-456-0375

5120-99-433-4767
Blow Valve Assembly

5120-99-138-3965
Ratchet Wrench

5120-99-465-8649
Mechanical Puller

5120-99-465-8103
Card Arm

5120-99-963-9714
Anvil

999639714
NO PRIMARY REF 99-963-9714: RNCC: 3 | RNVC: 2
UX265: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-139-9714
Screwdriver Bit

991399714
440TX09: RNCC: 3 | RNVC: 2
TX9: RNCC: 5 | RNVC: 2
440TX09: RNCC: 5 | RNVC: 2
TX9: RNCC: 5 | RNVC: 2
70826-02: RNCC: 5 | RNVC: 2
440TX09: RNCC: 5 | RNVC: 2
TX9: RNCC: 5 | RNVC: 2
1C8513: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-952-5954
Sealing Ring Insert

999525954
NO PRIMARY REF 99-952-5954: RNCC: 3 | RNVC: 2
RRB747842: RNCC: 5 | RNVC: 2

18 Jan 1977

5120-99-609-6056
Lifting Tool

996096056
NO PRIMARY REF 99-609-6056: RNCC: 3 | RNVC: 2
HU13385: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-606-5598
Impact Puller

996065598
NO PRIMARY REF 99-606-5598: RNCC: 3 | RNVC: 2
PE7039: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-024-8672
Hand Earth Boring Auger

990248672
AUGER: RNCC: 3 | RNVC: 2

27 Jul 1994

5120-99-654-3956
Bearing And Bushing Driver Plug

996543956
460009228C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-127-8497
Screw Thread Insert Inserter

991278497
528-3: RNCC: 3 | RNVC: 2
SR601298: RNCC: 6 | RNVC: 9
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-355-7307
Special Tool

993557307
FV 2225694: RNCC: 3 | RNVC: 2

27 Nov 1998

5120-99-664-4579
Spanner Wrench

996644579
1850T407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-812-3983

5120-99-810-6871

5120-99-816-8397
Brake Adjus Spanner

5120-99-607-9454
Face Spanner Wrench Socket

996079454
P.E.52663: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-332-9788
Propeller F Spanner

5120-99-710-6985
Socket Wrench H Bar

5120-99-793-4284
Bearing C Installer

5120-99-406-6091
Swaging P Seals Kit

5120-99-138-8560
Termi Crimping Tool

991388560
45216: RNCC: 3 | RNVC: 2
AMP45216: RNCC: 6 | RNVC: 9
1H940: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-148-9720
Spanner Wrench

991489720
6632056: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-924-5104

5120-99-967-7979
Vice

5120-99-970-1707

5120-99-117-0311
Face Spanner Wrench Socket

991170311
Z2096X19: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-810-5150
Veh Alignment Shaft

998105150
MF159A: RNCC: 3 | RNVC: 2
MF159B: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-468-0824
Crowbar

994680824
GM6938: RNCC: 3 | RNVC: 2
QAD DRG GM6938 ISSI: RNCC: 6 | RNVC: 9
1A4118: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-957-7252
Bearing Remova Tool

999577252
EA3205G028-111: RNCC: 3 | RNVC: 2

23 Jul 1998

5120-99-667-5659
Mounting Tool For A

996675659
NO PRIMARY REF 99-667-5659: RNCC: 3 | RNVC: 2
3307106: RNCC: 5 | RNVC: 2
3307106: RNCC: 5 | RNVC: 9

29 Jan 2010

5120-99-016-8137
Combination Box And Open End Wrench

990168137
NO PRIMARY REF 99-016-8137: RNCC: 3 | RNVC: 2
24-2936: RNCC: 5 | RNVC: 2
CSM236: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-052-5549
Pliers

990525549
NO PRIMARY REF 99-052-5549: RNCC: 3 | RNVC: 2
600100640: RNCC: 5 | RNVC: 2
3937: RNCC: 5 | RNVC: 2

3 Jul 1998

5120-99-126-2632
Cutter

991262632
AS710096-GA: RNCC: 3 | RNVC: 2
7579: RNCC: 6 | RNVC: 9

5 Mar 1996

5120-99-450-8662
Mechanical Puller

994508662
T21430: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-513-2439
Spanner

995132439
40015083: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-549-7314
Spanner

995497314
NO PRIMARY REF 99-549-7314: RNCC: 3 | RNVC: 2
37547: RNCC: 5 | RNVC: 2

9 Jun 2004

5120-99-946-1108
Electron Tube Extractor

999461108
SK604A: RNCC: 3 | RNVC: 2
640-4-02988: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-450-6998
Wate Extractor Tool

994506998
N919/139: RNCC: 3 | RNVC: 2
D/CSSE/DTR/19/339/3631A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-520-6908
Ele Installing Tool

5120-99-495-5963
Opening Too Coupler

5120-99-663-5880
Ammo Breaking Tool

5120-99-655-1535
Drift

996551535
460009338D: RNCC: 3 | RNVC: 2

20 Jan 1983

5120-99-910-7909
Riv Snap And Set Up

999107909
DEF1221: RNCC: 4 | RNVC: 1
H2392: RNCC: 6 | RNVC: 9
F1FA16937: RNCC: 6 | RNVC: 9
1C5006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-0389

5120-99-960-3798

5120-99-465-6927
Oil Syringe

994656927
1C2433: RNCC: 3 | RNVC: 2
C9255: RNCC: 5 | RNVC: 2
SB8: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-229-4952
Spanner Wrench

992294952
T1351: RNCC: 3 | RNVC: 2

28 Jan 2009

5120-99-149-0366
Assembly Post

991490366
460002435: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-657-5458
Wrench Decel Adjust

996575458
01TC12199: RNCC: 3 | RNVC: 2
01TC12199: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-146-2870
Bearing T Installer

991462870
S6170-10060-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-300-4191
Mechanical Puller

993004191
34020S 901: RNCC: 3 | RNVC: 2

20 Jan 1992

5120-99-442-8205
Keeper Bar

994428205
AP00043258: RNCC: 3 | RNVC: 2
121NQ-010: RNCC: 6 | RNVC: 9

23 Feb 2012

5120-99-659-6660
Face Spanner Wrench Socket

996596660
P-891065-403: RNCC: 3 | RNVC: 2
P891065-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-242-8783
Torque Wrench

992428783
AVT600: RNCC: 3 | RNVC: 2

8 May 2001

5120-99-471-5019
Clip Removal Tool

994715019
01108: RNCC: 3 | RNVC: 2

10 Feb 2009

5120-99-617-7033
Vise Jaw Caps

996177033
AE5372: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-657-7848
Socket Wrench

996577848
L180A: RNCC: 3 | RNVC: 2
V9655: RNCC: 5 | RNVC: 2
5J3924: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-654-4094
Torque Span Adaptor

996544094
460009092C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-9483
Pliers

991369483
2703: RNCC: 3 | RNVC: 2
11284: RNCC: 5 | RNVC: 2
54G04801: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-432-6510
Open End Wrench

994326510
S6150: RNCC: 3 | RNVC: 2

4 May 1995

5120-99-789-4574
Deglazing Tool Asse

997894574
69-92190: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-607-6145
Mechanical Puller

996076145
PE29426: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-238-2049
Flat Tip Screwdriver

992382049
E15640: RNCC: 3 | RNVC: 2
E15640: RNCC: 5 | RNVC: 2

10 Mar 2009

5120-99-203-9845
Hand Hydraulic Jack

992039845
GMD54464: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-416-5151
Box Spanner

5120-99-764-0401
Bolt Special

997640401
P-891159-003: RNCC: 3 | RNVC: 2
P891159-003: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-225-5395
Automatic Center Punch

992255395
18A: RNCC: 3 | RNVC: 2
H24691: RNCC: 5 | RNVC: 2

3 Aug 1994

5120-99-445-4061
Tyre Lever

994454061
KSE1551SSN05: RNCC: 3 | RNVC: 2
4A1679: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-464-5091
Socket Head Screw Key

994645091
RE100WA6: RNCC: 3 | RNVC: 2

23 Mar 2006

5120-99-136-9481
Retaining Ring Pliers

991369481
1129: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-402-0682

5120-99-204-8403
Trip Valve Cage

992048403
116715G: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-701-9639
Bulb Removal Tool

997019639
E22BA3: RNCC: 3 | RNVC: 2
7775304: RNCC: 6 | RNVC: 9
TT7775304: RNCC: 6 | RNVC: 9
E22BA3: RNCC: 6 | RNVC: 9

30 May 1995

5120-99-660-3112
Peg Spanner

996603112
802.511: RNCC: 3 | RNVC: 2
802.09: RNCC: 5 | RNVC: 2
FM9920P: RNCC: 6 | RNVC: 9

11 Mar 2000

5120-99-771-9665
Torque Wrench

997719665
882577: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-772-2755
Piston Ring Expander

997722755
751K: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-788-3187
Socket Wrench

997883187
001253041: RNCC: 3 | RNVC: 2
352-462E: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-778-3732
Socket Head Screw Key

997783732
NFL240: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-783-6721
Starter Punch

997836721
PPC204A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-776-7803
Bearing And Bushing Driver

997767803
460009593B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-771-3283
Spring Inserter And Remover

997713283
100175-6960-ASY: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-771-9662
Ratc Socket Spanner

997719662
H22355: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-609-6061
Box Wrench

996096061
KU.7129 DATED 13-9-63: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-5594
Flat Tip Screwdriver

991365594
DEF STAN 51-11 (PART 17): RNCC: 4 | RNVC: 1
BS2559:PART 1: RNCC: 4 | RNVC: 1
H6879: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-360-4314
Be Replacer Adaptor

993604314
LRT-41-006: RNCC: 3 | RNVC: 2
LST550-4: RNCC: 5 | RNVC: 2
LRT-41-006/1: RNCC: 5 | RNVC: 2

8 May 1992

5120-99-957-3332
Spanner Wrench

999573332
P10797: RNCC: 3 | RNVC: 2

11 Nov 1994

5120-99-879-5321
Torque Screwdriver

998795321
015200: RNCC: 3 | RNVC: 1
MINOR FH BLUE: RNCC: 5 | RNVC: 1

7 Feb 2007

5120-99-612-5865
Peg Spanner

996125865
HTESK5759: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-485-3497
Spanner Wrench

994853497
BL/D10465: RNCC: 3 | RNVC: 2

12 Aug 2009

5120-99-120-8011
Hole Sheet Metal Holder

991208011
9140-1000: RNCC: 3 | RNVC: 2
SSL 5/32: RNCC: 5 | RNVC: 2
5-32BLUE3-8: RNCC: 6 | RNVC: 9
SSL5-32: RNCC: 6 | RNVC: 9
0275-1703: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-655-3707
Torque Wrench Adapter

996553707
558-2-03416B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-236-1592
Inspe Mirror Handle

992361592
SE000300: RNCC: 3 | RNVC: 2
C-NIC-TOM: RNCC: 5 | RNVC: 2

8 Apr 2002

5120-99-114-8962
Socket Wrench Handle Bar

991148962
322-79: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-622-8727

5120-99-354-0469
Sledge Hammer 7Lb

993540469
SLEDGE HAMMER 7LB: RNCC: 3 | RNVC: 2

21 May 2004

5120-99-862-1104
Removal: Tool

998621104
AP57739: RNCC: 3 | RNVC: 2
112554ST: RNCC: 5 | RNVC: 2
FV1048048: RNCC: 5 | RNVC: 2

17 Mar 1984

5120-99-895-7829
Oil Seal Installer

998957829
KML3022: RNCC: 3 | RNVC: 2
AST3022: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-713-9202
Drift Assembly

997139202
PE3965: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-395-8672
Spanner Wrench

993958672
AM 00 06 97000: RNCC: 3 | RNVC: 2
60202426: RNCC: 5 | RNVC: 2

28 Jun 2005

5120-99-120-9563
Ratche Ring Spanner

991209563
R1618: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-716-6123
Ca Spanner Assembly

997166123
MBEU6146: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-206-2731

5120-99-449-8547

5120-99-382-7565
Drill Guide

993827565
619198: RNCC: 3 | RNVC: 2

11 Oct 2012

5120-99-207-3313
Socket Wrench Socket

992073313
EDM19: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-753-9752
Bushing Installer

997539752
J24371: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-811-8539
Flexi Charging Pipe

998118539
460006009: RNCC: 3 | RNVC: 2

26 Nov 1997

5120-99-748-2742
Mechanical Puller

997482742
PE59270: RNCC: 3 | RNVC: 2
PE59270: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-748-5313
Torque Wrench Adapter

997485313
A15175: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-8412
Socket Wrench Socket

991208412
BS4006: RNCC: 4 | RNVC: 1
TMD 12 LOCK-ON: RNCC: 5 | RNVC: 2
H21685: RNCC: 5 | RNVC: 2
TABLE I(C) 3/8A/F: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6294: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6218
Socket Wrench

999106218
BS2558: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5289: RNCC: 6 | RNVC: 9
TABLE I(E) 1/2BS: RNCC: 6 | RNVC: 9
565434: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-2789
Sizing Tool

994232789
HD-70359/3: RNCC: 3 | RNVC: 2
HD-70359 ITEM 3: RNCC: 5 | RNVC: 2

28 Oct 2011

5120-99-655-5111
Torque Wrench Adapter

996555111
A0118088-7: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-179-8583
Aligning Punch

991798583
F-101: RNCC: 3 | RNVC: 2

3 Dec 1991

5120-99-465-8696
Locator

994658696
604922-2: RNCC: 3 | RNVC: 2
1H406: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-779-1807

5120-99-230-5778
Seal Inserter

992305778
MINM TOOL (DOIT): RNCC: 3 | RNVC: 2

22 Apr 2013

5120-99-452-7722
Locking Tool

994527722
MBEU9320: RNCC: 3 | RNVC: 2
AMBEU9320: RNCC: 5 | RNVC: 2
27L1299: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-037-0555
Mounting Tool

990370555
JN4201: RNCC: 3 | RNVC: 2

28 Mar 1996

5120-99-348-9912
Chinese Finger Tool

993489912
IAC-TB15954: RNCC: 3 | RNVC: 2

17 Jan 1997

5120-99-459-0674
Handle

994590674
AK639: RNCC: 3 | RNVC: 2
64VV2503: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-715-9460

5120-99-714-1540

5120-99-713-7650

5120-99-375-3643
Torque Wrench Adapter

993753643
FV 2235153: RNCC: 3 | RNVC: 2

12 Nov 2003

5120-99-558-8374
Open End Box Wrench

995588374
BF29066: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-205-8263
Hydrau Nut Assembly

992058263
GMA54501ANDGMA54502: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-419-1442
Spanner Wrench

994191442
WSK 10737: RNCC: 3 | RNVC: 2
Z1ZA17162: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-553-0350
Cams Spanner

995530350
PC2429: RNCC: 3 | RNVC: 2
PC2429: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-778-1828
Tamper Screwdriver

997781828
ECB350345AA: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-370-9141
Open End Wrench

993709141
29873: RNCC: 3 | RNVC: 2

27 Feb 1992

5120-99-606-6895
Mechanical Puller

996066895
PE3447: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-137-8209
Socket Wrench Socket

991378209
STMD16: RNCC: 3 | RNVC: 2
STMD16: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-958-8074
Multipurpos Crimper

999588074
SE263: RNCC: 3 | RNVC: 2

8 Feb 2013

5120-99-989-6115
Seat Tool

999896115
K18723: RNCC: 3 | RNVC: 2

12 Oct 2000

5120-99-971-8819
Socket Wrench Socket

999718819
DB437: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-958-7066
Seal Inserter

999587066
990000600: RNCC: 3 | RNVC: 2
990000609: RNCC: 5 | RNVC: 2

14 Mar 2012

5120-99-513-2883
Pulling Head

995132883
PRH825: RNCC: 3 | RNVC: 2

23 Apr 1990

5120-99-747-6117
Spanner End

997476117
1DET1: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-417-3328
Spanner Wrench

994173328
03110TA01: RNCC: 3 | RNVC: 2
27Q19047: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-665-4773
Mechanical Puller

996654773
CBD10548G01: RNCC: 3 | RNVC: 2

21 Dec 2001

5120-99-842-2145
Tommy Bar

998422145
PPE048929: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-531-4050
Socket Wrench H Bar

5120-99-735-6050
Driftpin

997356050
A3/7017/675.3: RNCC: 3 | RNVC: 2
AG 66: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-553-3703
Hand Hydraulic Jack

995533703
NO PRIMARY REF 99-553-3703: RNCC: 3 | RNVC: 2
0.9213C: RNCC: 5 | RNVC: 2
0.9213C: RNCC: 5 | RNVC: 9

1 Jun 2011

5120-99-459-0574
Spanner

994590574
AK195: RNCC: 3 | RNVC: 2
64VV739: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-457-4147
Socket Wrench Socket

994574147
AS511646: RNCC: 3 | RNVC: 2
576338: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-024-6794
Valve Guide Pilot

990246794
317-50075: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-99-122-5137
Socket Wrench Socket

991225137
KS361: RNCC: 3 | RNVC: 2
T2BJ7185: RNCC: 5 | RNVC: 2
1L525: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-5610

5120-99-632-5668

5120-99-428-8893

5120-99-316-3311
Removal And Fitting

993163311
PC20897: RNCC: 3 | RNVC: 2
PC20897: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-560-7620
Wire Twister Pliers

995607620
1703069: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-856-3865
Combination Open End And Spanner Wrench

998563865
825/99845: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-977-4945
Termi Crimping Tool

999774945
574874: RNCC: 3 | RNVC: 2

24 Feb 1981

5120-99-607-8546
Seal Extractor

996078546
PE53315: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-257-9335
Socket Wrench Socket

992579335
EHM16: RNCC: 3 | RNVC: 2
BS4006: RNCC: 4 | RNVC: 1

25 Aug 1995

5120-99-978-1597
Screwdriver Bit

999781597
1UPZD2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-977-8327
Special Wrench

999778327
100559: RNCC: 3 | RNVC: 2
100559: RNCC: 5 | RNVC: 2
3AP4823: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-978-1904
Screwdriver Bit

999781904
2UPZD4: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-469-0835
Spanner

994690835
B2946F1: RNCC: 3 | RNVC: 2
27VB3418: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-961-9612
Drive Pin Punch

999619612
SA1D1403A: RNCC: 3 | RNVC: 2
223436: RNCC: 6 | RNVC: 9
C1BD2530: RNCC: 6 | RNVC: 9
1E5126: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-724-5361
Socket Wrench Socket

997245361
NM23LA: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-811-0025
Shock Assembly Tool

998110025
FV603936: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-537-2310
Spec Wrench Spanner

995372310
NO PRIMARY REF 99-537-2310: RNCC: 3 | RNVC: 2
A41041-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-356-7310
Socket Wrench Socket

993567310
HB2220: RNCC: 3 | RNVC: 2
80-461-02090-716: RNCC: 5 | RNVC: 2
T.710/9/5: RNCC: 5 | RNVC: 2
5120-99-302-1480: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9

27 Aug 1992

5120-99-201-8742
Bearing Extra Shell

992018742
NO PRIMARY REF 99-201-8742: RNCC: 3 | RNVC: 2
444-31-073-1: RNCC: 5 | RNVC: 9
W3-00001-04533: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-7229
Refri Wrench Socket

991367229
DRG5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-610-5198
Spanner Wrench

996105198
PE55918: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-731-2152
Swaging Tool

997312152
FV2077327: RNCC: 3 | RNVC: 2
AT60026: RNCC: 5 | RNVC: 2

12 May 1986

5120-99-435-5060
Puller Head

994355060
PRH820: RNCC: 3 | RNVC: 2

23 Apr 1990

5120-99-799-7997
Torque Wrench

997997997
011017: RNCC: 3 | RNVC: 1
TSN 25D: RNCC: 5 | RNVC: 1
MGWS42A: RNCC: 6 | RNVC: 9

17 Jul 2008

5120-99-107-5548

5120-99-052-4616
Lens Removal Tool

5120-99-062-6022
Spanner Special

5120-99-542-6221
Open End Wrench

995426221
TZ499012: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-612-8832
Open End Wrench

996128832
CB1J: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-666-7931
Open End Wrench

996667931
MBEU56927: RNCC: 3 | RNVC: 2

18 Jan 2007

5120-99-113-3623
Socket Head Screw Key

991133623
E32139A01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-573-1691
Clut Adjusting Tool

995731691
FV 2171094: RNCC: 3 | RNVC: 2
FV 2171094: RNCC: 5 | RNVC: 2

9 Jan 1995

5120-99-979-0315
Splicing Sleeve Compressing Tool

999790315
AD-1319: RNCC: 3 | RNVC: 2
100437-9000-165: RNCC: 5 | RNVC: 2

23 Apr 1992

5120-99-274-4247
Extension Bar

992744247
NO PRIMARY REF 99-274-4247: RNCC: 3 | RNVC: 2
FXK4: RNCC: 5 | RNVC: 2
C569-70T269315: RNCC: 6 | RNVC: 9

10 Apr 2002

5120-99-225-9197
Flywhe Locking Tool

992259197
VS1283: RNCC: 3 | RNVC: 2
RSK-1646-05012: RNCC: 5 | RNVC: 2

5 Aug 2005

5120-99-494-1997
Plastic Mallet

994941997
PT00266: RNCC: 3 | RNVC: 2

7 Oct 2009

5120-99-560-8223
Lantern R Extractor

5120-99-421-2053
Wedge

994212053
A1071009: RNCC: 3 | RNVC: 2
X65813: RNCC: 5 | RNVC: 2

21 Mar 2001

5120-99-591-4397
Socket Wrench Socket

995914397
STMM 4.5 LOCK-ON: RNCC: 3 | RNVC: 2
STMM 4.5 LOCK-ON: RNCC: 6 | RNVC: 9
XP98PC01262: RNCC: 6 | RNVC: 9

27 Mar 1998

5120-99-139-7043
Allen Key

991397043
N 5701 012: RNCC: 3 | RNVC: 2

28 Jan 1999

5120-99-770-6773
Forming Tool

5120-99-758-4433
Socket Head Scr Key

5120-99-758-6034
Socket Head Scr Key

5120-99-670-3935

5120-99-738-4556

5120-99-742-9434

5120-99-717-8162
Crowfoot Attachment

5120-99-843-1451

5120-99-847-6792

5120-99-112-3445
Hydraulic Jack Handle

991123445
SLB2192: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-746-7219
Drift Punch

997467219
SAO10443: RNCC: 3 | RNVC: 2

2 Aug 2002

5120-99-136-3632
Retaining Clamp

991363632
YJ70924: RNCC: 3 | RNVC: 2
678-941320: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-7771
Spanner

997107771
VIBROLL274075: RNCC: 3 | RNVC: 2
274075: RNCC: 6 | RNVC: 9

1 Jun 1990

5120-99-547-1170
Ins Special Spanner

995471170
P5173924570: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-471-1617
Socket Wrenc Socket

994711617
406281: RNCC: 3 | RNVC: 2
FL000ED0027: RNCC: 6 | RNVC: 9

20 Mar 2000

5120-99-529-3156

5120-99-545-2726
Attachment Spanner

5120-99-466-7050
Spanner

5120-99-139-3784
Imp Screwdriver Set

991393784
401: RNCC: 3 | RNVC: 2
040100: RNCC: 5 | RNVC: 2
1C1393784: RNCC: 6 | RNVC: 9
99-870-1408: RNCC: 6 | RNVC: 9
040101: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-176-0878
Face Spanner Wrench Socket

991760878
WG1488-0183-041: RNCC: 3 | RNVC: 2

22 Dec 2012

5120-99-655-3820
Mechanical Puller

996553820
CHA754-328-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-957-3319
Cont Insertion Tool

999573319
C1TC2: RNCC: 3 | RNVC: 2
C1TC2: RNCC: 5 | RNVC: 2
CIT-C2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-961-9069
Wrench And Screwdri

999619069
NO PRIMARY REF 99-961-9069: RNCC: 3 | RNVC: 2
CM7180: RNCC: 5 | RNVC: 2
M1CM7180: RNCC: 6 | RNVC: 9
M1CM7180: RNCC: 6 | RNVC: 9
223360: RNCC: 6 | RNVC: 9
7E1196: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-846-0635
Torque Screwdriver

998460635
C16390: RNCC: 3 | RNVC: 1
ECM TOOL: RNCC: 6 | RNVC: 9

27 Oct 2009

5120-99-893-0403
Drift Punch

998930403
AE5462: RNCC: 3 | RNVC: 2

15 Nov 2011

5120-99-910-7840
Hand Rivet Set Up

999107840
DEF1221: RNCC: 4 | RNVC: 1
H2384: RNCC: 5 | RNVC: 2
H2384: RNCC: 6 | RNVC: 9
1C5406: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-2153
Open End Wrench

991242153
BS192: RNCC: 3 | RNVC: 1
0MA252: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-5549
Combination Box And Open End Wrench

991205549
BS192 AND BS3555: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-503-8840
Bearing Extractor

995038840
SAO10276: RNCC: 3 | RNVC: 2
SAO.10276: RNCC: 6 | RNVC: 9

4 Mar 2002

5120-99-907-0997
Pad Insertion Tool

999070997
BLR6678: RNCC: 3 | RNVC: 2
FM9920P: RNCC: 6 | RNVC: 9

11 Mar 2000

5120-99-782-1302

5120-99-843-6161

5120-99-782-7730

5120-99-659-7520
Box Wrench

996597520
460009069D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-1503
Spring Inserter And Remover

996551503
460009358B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-124-2078

5120-99-124-2493
Insertion An Handle

5120-99-124-2487

5120-99-101-5802

5120-99-848-7750

5120-99-662-8602
Pressing Anvil

5120-99-323-6687
Retaining Ring Pliers

993236687
X65877: RNCC: 3 | RNVC: 2
HB-1SS: RNCC: 5 | RNVC: 2
A1071001: RNCC: 5 | RNVC: 2

3 Apr 2001

5120-99-977-2445
Special Spanner

999772445
M2569-4A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-152-1791
Torque Wrench Adapter

991521791
EA6305G695-101: RNCC: 3 | RNVC: 2

10 Jun 2011

5120-99-357-7928
Extractor

993577928
ASTE 199: RNCC: 3 | RNVC: 2
26LE-95395: RNCC: 6 | RNVC: 9

14 Jul 2003

5120-99-663-9895
Screwdriver Bit

996639895
1USB3MS: RNCC: 3 | RNVC: 2

5 Jun 1998

5120-99-120-5545
Box And Open Wrench

991205545
H21171: RNCC: 3 | RNVC: 2
RJ600: RNCC: 5 | RNVC: 2
RJ600: RNCC: 6 | RNVC: 9
BS192: RNCC: 6 | RNVC: 9
BS3555: RNCC: 6 | RNVC: 9
F1FA17207: RNCC: 6 | RNVC: 9
TASP43: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-734-4885
Wire Tensioner

997344885
MJ68022: RNCC: 3 | RNVC: 2

13 Sep 1990

5120-99-731-2171
Pist Insertion Tool

997312171
FV2077390: RNCC: 3 | RNVC: 2
AT60093: RNCC: 5 | RNVC: 2

15 Apr 1986

5120-99-732-0445
Guide Tool

997320445
GA5128: RNCC: 3 | RNVC: 2
VT17843: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-726-0836
Spanner Wrench

997260836
RO606601: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-734-4777
Flare Spanner

997344777
T10386: RNCC: 3 | RNVC: 2

3 Mar 1986

5120-99-135-9281
Box Wrench

991359281
DEF STAN 51-11 PART 3: RNCC: 4 | RNVC: 1
BS2558-TABLE 2 46X50A/F: RNCC: 4 | RNVC: 1
H6755: RNCC: 6 | RNVC: 9
TABLE I(A) 46X50A/F: RNCC: 6 | RNVC: 9
10750-43324650: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-4583
Spanner Wrench

994224583
N37269-5: RNCC: 3 | RNVC: 2
88604-606-012: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-3879
Water Pum Extractor

994013879
NO PRIMARY REF 99-401-3879: RNCC: 3 | RNVC: 2
262770: RNCC: 5 | RNVC: 2
16C5482: RNCC: 6 | RNVC: 9

27 Dec 1979

5120-99-256-6599
Insert

992566599
5870-656-028: RNCC: 3 | RNVC: 2
5870-656-028: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-964-8560
Removing Tool

999648560
PA577-318: RNCC: 3 | RNVC: 2
362396: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-964-1463
Spanner Wrench

999641463
D5E10595-161: RNCC: 3 | RNVC: 2
7R247: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-145-3978

5120-99-137-7373

5120-99-458-1862
Pliers

994581862
AS210453: RNCC: 3 | RNVC: 2
861828: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-898-0476
Torque Wrench

998980476
NKR753 AND NKR677: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

17 Sep 2008

5120-99-910-4553
Pliers

999104553
131181: RNCC: 3 | RNVC: 2
CN2048: RNCC: 5 | RNVC: 2
N8338: RNCC: 5 | RNVC: 2

4 Feb 1984

5120-99-700-6938
Screwdriver Bit

997006938
029340: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-149-9787
Torque Wrench Adapter

991499787
3310672: RNCC: 3 | RNVC: 2

18 Aug 2009

5120-99-235-4270
Crow Foot Spanner

992354270
FV3028073: RNCC: 3 | RNVC: 2
FH000R40012: RNCC: 6 | RNVC: 9

17 Apr 2000

5120-99-135-4718
Socket Wrench Socket

991354718
HLW 211: RNCC: 3 | RNVC: 2
1L396: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-654-4039
Spanner Wrench

996544039
460009050D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-550-9941

5120-99-541-8320
Socket Spanner

5120-99-495-5336
Torque Wrench

994955336
T0854/36L: RNCC: 3 | RNVC: 2
T0854/36 L: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-783-9684
Allen Key

997839684
CES NKCS-04-4/1 1.1.1.52: RNCC: 3 | RNVC: 2

6 May 1987

5120-99-432-4397
Flat Tip Screwdriver

994324397
56978/0007: RNCC: 3 | RNVC: 2
7-56978: RNCC: 5 | RNVC: 2
88870-363-169: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-760-9968
Ram Se Fitting Tool

997609968
892/00334: RNCC: 3 | RNVC: 2

22 Jan 2007

5120-99-376-2824
Mechanical Puller

993762824
AL91: RNCC: 3 | RNVC: 2
AL91/C: RNCC: 6 | RNVC: 9

15 Jul 1998

5120-99-710-4271
Bearing And Driver

997104271
PE8602: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-6311
Socket Wrench Handle Bar

991366311
H6960: RNCC: 2 | RNVC: 2

25 Apr 1991

5120-99-120-4494
Open End Wrench

991204494
1REFDWGGP: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-459-0562
Driving Adaptor

994590562
HW20731: RNCC: 3 | RNVC: 2
64VV281: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-433-4835
Torque Wrench Adapter

994334835
A28310: RNCC: 3 | RNVC: 2

14 Sep 2009

5120-99-732-0365
Ring Retaining Pliers Tip Set

997320365
490A.E3: RNCC: 3 | RNVC: 2

27 Mar 1996

5120-99-737-9654
Screwdriver Bit

997379654
E14: RNCC: 3 | RNVC: 2

18 Feb 1986

5120-99-715-9513
Be Remover Assembly

997159513
S6172-35019-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-205-8272
Release Spindle Ass

992058272
GMD54464SITEM38-39-54: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-991-3131
Socket Wrench Socket

999913131
4305M-10: RNCC: 3 | RNVC: 2
KK4305M-10: RNCC: 5 | RNVC: 2
3687418C1: RNCC: 5 | RNVC: 2

23 Mar 2010

5120-99-779-1689
Universal Hand Tool

997791689
UT910596A-M20: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-434-7319
Textile Marki Stamp

994347319
NO PRIMARY REF 99-434-7319: RNCC: 3 | RNVC: 2
F1FA17739: RNCC: 5 | RNVC: 2

1 Jul 1982

5120-99-397-6865
Leveling-Support Jack

993976865
2-OWE-211215: RNCC: 3 | RNVC: 2
76DR/206: RNCC: 5 | RNVC: 2
2-OWE-211215: RNCC: 5 | RNVC: 2
WE 14206: RNCC: 6 | RNVC: 9
012EP-014: RNCC: 6 | RNVC: 9

18 Sep 2001

5120-99-764-0057
Handle

997640057
P-891138-003: RNCC: 3 | RNVC: 2
P891138-003: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-601-9903
Face Spanner Wrench Socket

996019903
810141/000: RNCC: 3 | RNVC: 2
GA810141/000: RNCC: 5 | RNVC: 2

22 Mar 2013

5120-99-146-2946
Mechanical Puller

991462946
S6270-35048: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-4538
Digging Pick

991204538
DEFSTAN51-11 PT28: RNCC: 4 | RNVC: 1
TABLE 1A: RNCC: 6 | RNVC: 9
DEFSTAN51-11: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-2817
Drive Pin Punch

991242817
N0D2175-601TEM11: RNCC: 3 | RNVC: 2
223371: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-612-8837
Face Spanner Wrench Socket

996128837
CB7J: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-222-4098
Open End Wrench

992224098
1333B: RNCC: 3 | RNVC: 2
CAT2709: RNCC: 5 | RNVC: 2
L650SH691: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-122-3592

5120-99-136-9033

5120-99-910-6602
Hand Vice

999106602
H2967: RNCC: 2 | RNVC: 2
H2967: RNCC: 5 | RNVC: 2
1C2621: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-723-8735
Expander

997238735
SAB491: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-6053
Open End Wrench

999106053
BS192: RNCC: 4 | RNVC: 1
FA17137: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-4744
Hand Hammer

5120-99-120-4630

5120-99-120-2216

5120-99-120-0023

5120-99-714-5534
Mechanical Puller

997145534
PC5629A2: RNCC: 3 | RNVC: 2
PC5629A2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-424-0929
Nuts Distance Piece

994240929
A204865: RNCC: 3 | RNVC: 2
A204865: RNCC: 5 | RNVC: 9
26FX95309: RNCC: 6 | RNVC: 9
26FX95309: RNCC: 6 | RNVC: 9

10 Oct 1979

5120-99-206-7785
Delivery Extractor

992067785
TS23: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-212-3009
Box Wrench

5120-99-910-5452

5120-99-453-7459
Mechanical Puller

994537459
HU2899: RNCC: 3 | RNVC: 2
64TN47: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-9668

5120-99-792-6373
Spanner Wrench

997926373
A2/7063/675 3: RNCC: 3 | RNVC: 2
A2/7063/675 3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-710-6715
Spanner Wrench

997106715
NR81931: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-134-7906
Machinist's Vise

991347906
RQV100: RNCC: 3 | RNVC: 2
RQV100 QUICK-VICE: RNCC: 5 | RNVC: 2

3 Nov 2005

5120-99-804-5872
Socket Wrench Socket

998045872
18G587: RNCC: 3 | RNVC: 2
HY15: RNCC: 5 | RNVC: 2
18G587: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-2686

5120-99-137-6837

5120-99-120-2690

5120-99-801-8045
Hand Screw Jack

5120-99-454-8959
Tweezers

5120-99-465-7234
Mechanical Puller

5120-99-127-8992
Sock Wrench Key Bit

5120-99-968-4227
Hand Tube Bender

999684227
NO PRIMARY REF 99-968-4227: RNCC: 3 | RNVC: 2
206-3491: RNCC: 5 | RNVC: 2

22 Dec 2004

5120-99-326-3033
Standoff

993263033
ZJEF005555TRY-ITEM-476: RNCC: 3 | RNVC: 2

3 Apr 2002

5120-99-979-2598
Box Wrench

999792598
NO PRIMARY REF 99-979-2598: RNCC: 3 | RNVC: 2
VTR205N1130P: RNCC: 5 | RNVC: 2
VTR205N1130P: RNCC: 5 | RNVC: 9

15 Nov 2010

5120-99-910-5649

5120-99-910-7941
Moulders Trowels

5120-99-788-7244

5120-99-549-9787
Vent Rod

995499787
BM53430: RNCC: 3 | RNVC: 2

19 Jul 2005

5120-99-258-9992
Mechanical Puller

992589992
MBEU171836: RNCC: 3 | RNVC: 2
MBEU171836: RNCC: 5 | RNVC: 2

7 Feb 2002

5120-99-465-8024
Screw Extractor Set

994658024
EZY: RNCC: 3 | RNVC: 2
1A3750: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-840-0379
Cylin Lifting Plate

5120-99-838-3294

5120-99-051-8334
Socket Head Scr Key

5120-99-038-2083

5120-99-910-4378

5120-99-467-4382
Spanner Wrench

994674382
CST811: RNCC: 3 | RNVC: 2
ST811: RNCC: 5 | RNVC: 2
27Q6960: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-670-5161
Open End Wrench

996705161
FV 2253958: RNCC: 3 | RNVC: 2

23 Aug 2005

5120-99-612-8168
Mechanical Puller

996128168
121E93-810-00-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-816-8506
Bear Pre Load Gauge

998168506
CP4030: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-815-7801
Spanner Wrench

998157801
FV 51448: RNCC: 3 | RNVC: 2
LV9ASCFV51448: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-960-3790

5120-99-428-2368

5120-99-434-9186

5120-99-777-6255
Spanner Wrench

997776255
42158S: RNCC: 3 | RNVC: 2
B120988: RNCC: 5 | RNVC: 2
727111: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-778-7536
Mirror Lens

997787536
LR36: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-777-9535
Retaining Ring Pliers

997779535
546-635: RNCC: 3 | RNVC: 2
546-635: RNCC: 5 | RNVC: 2

30 Jun 1999

5120-99-772-4676
Spanner Wrench

997724676
742057: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-254-3489
Flat Tip Screwdriver

992543489
MP1542: RNCC: 3 | RNVC: 2
MP1542-A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-434-9419
Socket Wrench Socket

994349419
BS4006-TABLE 17 25/32A/F: RNCC: 4 | RNVC: 1
F1FA17460: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-930-4279
Pneumatic Tire Valve Core Inserter And Remover

999304279
DP10509: RNCC: 3 | RNVC: 2
CX0003683: RNCC: 6 | RNVC: 9
EX0003683: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-955-9654
Flat Tip Screwdriver

999559654
RRA828561: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-660-2081
Mechanical Puller

996602081
S3S18268000: RNCC: 3 | RNVC: 2

15 Jan 1992

5120-99-244-5220
Punch

992445220
AS511980: RNCC: 3 | RNVC: 2

16 Apr 1992

5120-99-993-8415
Hand Rivet Snap

999938415
8057/0000/F: RNCC: 3 | RNVC: 2
PT 8057/000F: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-607-0333
Torque Wrench Adapter

996070333
KU.12926: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-135-5737
Ha Hydraulic Jack

991355737
MXK1237: RNCC: 3 | RNVC: 2
ATGX10.200: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-805-8635

5120-99-817-6262

5120-99-577-4351
Socket Wrench

995774351
PMC 40: RNCC: 3 | RNVC: 2

18 Aug 2010

5120-99-812-3927

5120-99-812-3940

5120-99-782-2324

5120-99-777-1340
Screwdriver Bit

5120-99-724-0404

5120-99-749-1144
Spanner Wrench

5120-99-753-2946

5120-99-747-4966

5120-99-137-5714
Watchmaker's Blower

991375714
RV060: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-795-5434
Spanner Wrench

997955434
P-891449-405: RNCC: 3 | RNVC: 2
P891449-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-257-4286
Lamp Extractor

992574286
NO PRIMARY REF 99-257-4286: RNCC: 3 | RNVC: 2
5.05800.012: RNCC: 5 | RNVC: 2
SR1895/1: RNCC: 5 | RNVC: 2
SR1900/9: RNCC: 5 | RNVC: 2
738-94/1: RNCC: 6 | RNVC: 9
731-94/3: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-817-4757
Tra Shaft Extractor

998174757
NO PRIMARY REF 99-817-4757: RNCC: 3 | RNVC: 2
605862: RNCC: 5 | RNVC: 9

26 Jan 1979

5120-99-659-6900
Shroud

996596900
48421A43/403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-714-6424
Tool

997146424
NO PRIMARY REF 99-714-6424: RNCC: 3 | RNVC: 2
73LTA16A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-414-7703
Spring Compressor

994147703
NO PRIMARY REF 99-414-7703: RNCC: 3 | RNVC: 2
ST1912: RNCC: 5 | RNVC: 9
27Q12959: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-9753
Bearing And Driver

5120-99-721-5695
Socket Wrench Handle Bar

997215695
84770163: RNCC: 3 | RNVC: 2
84770163: RNCC: 5 | RNVC: 2
A0084770163: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-655-3925
Spanner Wrench

996553925
1952T403: RNCC: 3 | RNVC: 2
2143T000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-716-0276
Spanner

997160276
HU21398/1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-702-6101
Tool Kit

997026101
074.230.00: RNCC: 3 | RNVC: 2

13 May 1998

5120-99-631-0876
Wrench Spanner

996310876
17245: RNCC: 3 | RNVC: 2
17245: RNCC: 5 | RNVC: 2
5CA112913: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-588-1362
Handle Assembly

995881362
01TC11870: RNCC: 3 | RNVC: 2
01T-C-11870: RNCC: 5 | RNVC: 2
01TC11870: RNCC: 6 | RNVC: 9

8 May 1990

5120-99-413-7984
Tool

994137984
2071-30210: RNCC: 3 | RNVC: 2
232870: RNCC: 5 | RNVC: 2
2071-30210-04-3: RNCC: 5 | RNVC: 2

16 Nov 1995

5120-99-139-7060
Socket H Wrench Key

5120-99-469-3729
Socket Wrench Socket

994693729
DQ375: RNCC: 3 | RNVC: 2
1L347: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-469-6117

5120-99-663-8806
Cutting Tool

5120-99-961-5832

5120-99-138-5045

5120-99-139-1046
Tang Breakoff Tool

Load More Results