What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 28 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 28 of 108

5120-99-910-4474
Set Bending Bar

999104474
NO PRIMARY REF 99-910-4474: RNCC: 3 | RNVC: 2
H120: RNCC: 5 | RNVC: 2
1A3909: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-921-8429
Tool Assembly

999218429
EA6505G511-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-536-9434
Torque Wrench

995369434
12001: RNCC: 3 | RNVC: 2
3AR: RNCC: 5 | RNVC: 2
A99-48381: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-955-9789
Open End Wrench

999559789
Y183: RNCC: 3 | RNVC: 2
R30-9511-50: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-209-7848
Stud

992097848
K717-111: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-791-8524
Plug

997918524
07110060: RNCC: 3 | RNVC: 2
110060: RNCC: 5 | RNVC: 2
07110060: RNCC: 5 | RNVC: 2
07110060: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-101-5736
Box Wrench

991015736
UT.23: RNCC: 3 | RNVC: 2
64AE23: RNCC: 6 | RNVC: 9
64AE5: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-482-0149
Bearing Staking Installation Tool

994820149
PE34922: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-99-454-3205
Tool Set

994543205
VDS37092: RNCC: 3 | RNVC: 2

17 Feb 1998

5120-99-433-4629

5120-99-209-7844
Adjusting Screw

992097844
D45-028: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-923-8154
Socket Wrench Socket

999238154
MH338: RNCC: 3 | RNVC: 2
AK34: RNCC: 5 | RNVC: 2
0277-161: RNCC: 6 | RNVC: 9
0277-923-8154: RNCC: 6 | RNVC: 9
1L161: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-527-2049
Box Wrench

995272049
11-454-19-10-1028: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-434-7195
Cotter Pin Extractor

994347195
NO PRIMARY REF 99-434-7195: RNCC: 3 | RNVC: 2
F1FA13160: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-775-2806
Torque Wrench Kit

997752806
A69/92170 ISSUE 1: RNCC: 3 | RNVC: 2

28 Jan 1988

5120-99-799-1648
Socket Head Screw Key

997991648
703-18-3-12205/1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-763-7910
Open End Wrench

997637910
514-159/2: RNCC: 3 | RNVC: 2
514-159: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-432-8471
Self Adjusti Pliers

994328471
RBG35: RNCC: 3 | RNVC: 2
REF370104NO2OF2: RNCC: 6 | RNVC: 9

17 Apr 2001

5120-99-607-6592
Bearing And Bushing Inserter

996076592
S3S17164000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-505-2481
Torque Adaptor Set

995052481
3377T000: RNCC: 3 | RNVC: 2

3 Jun 2009

5120-99-557-4382
Wrench Spanner

5120-99-632-6036

5120-99-953-4110

5120-99-953-1366

5120-99-168-6893
Tyre Removal Ring

5120-99-953-4545

5120-99-456-0862
W Bearing Extractor

994560862
A0105540: RNCC: 3 | RNVC: 2
27A4770: RNCC: 6 | RNVC: 9

8 Sep 1978

5120-99-120-9523
Socket Wrench Socket

991209523
1209523: RNCC: 3 | RNVC: 2
1L1209523: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-878-8064
Hand Blind Riveter

5120-99-810-6711
Bearing Replacer

5120-99-735-8913
Socket Wrench Socket

997358913
27122584: RNCC: 3 | RNVC: 2

22 Oct 1986

5120-99-133-9953
Spanner Wrench Set

991339953
13-18088: RNCC: 3 | RNVC: 2

9 Nov 2007

5120-99-122-5035

5120-99-124-4721
Socket Head Scr Key

5120-99-328-4373
Steel Crimper

993284373
NO PRIMARY REF 99-328-4373: RNCC: 3 | RNVC: 2
ACME 18MM: RNCC: 5 | RNVC: 2
C569-70T279396: RNCC: 6 | RNVC: 9

24 May 2002

5120-99-910-6540
Socket Wrench Handle Bar

999106540
BS2558: RNCC: 4 | RNVC: 1
H20239: RNCC: 5 | RNVC: 2
F1FA17600: RNCC: 6 | RNVC: 9
88720-702-262: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-465-4118
Sealing Press

994654118
1B4122: RNCC: 3 | RNVC: 2
1B4122: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-635-3550
Torque Wrench Adapter

996353550
827098: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-558-6079
Mandrel

995586079
T753: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-0403
Wire Threading Tool

991240403
CT3: RNCC: 3 | RNVC: 2
1H217: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-745-0068
Spanner

997450068
BOF22291: RNCC: 3 | RNVC: 2
582-0612: RNCC: 5 | RNVC: 2
FL9630T0005: RNCC: 6 | RNVC: 9

15 Jan 1996

5120-99-157-9973
Pin Remover

991579973
EA6205G026-105: RNCC: 3 | RNVC: 2

9 Jan 2002

5120-99-759-4697
Socket Wrench

997594697
SSN02/516/846/16 AND 17: RNCC: 3 | RNVC: 2
516/846/16,17: RNCC: 5 | RNVC: 1
516/846/16 AND 17: RNCC: 5 | RNVC: 1
SSN02/516/846/16,17: RNCC: 5 | RNVC: 2
H926-130343: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-819-1777
Final Tube Assembly

998191777
NO PRIMARY REF 99-819-1777: RNCC: 3 | RNVC: 2
FV769462: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-135-6254
Socket Head Screw Key

991356254
H6688: RNCC: 4 | RNVC: 1
PC79023-3: RNCC: 5 | RNVC: 2
WY-5/64IN-AFX4.500IN-LG: RNCC: 5 | RNVC: 2
H6688: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-784-7148
Seat Removing Tool

997847148
ASK1702/2: RNCC: 3 | RNVC: 2
ASK1702: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-547-4314
Torque Wrench Adapter

995474314
3073/414: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-648-1496
Face Spanner Wrench Socket

996481496
460009031B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-666-9742
Combination Open End And Spanner Wrench

996669742
13-59562: RNCC: 3 | RNVC: 2

12 Nov 2007

5120-99-609-2954

5120-99-654-5655

5120-99-724-1721
Blind Riveter Nosepiece

997241721
15083: RNCC: 3 | RNVC: 2
15017-4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-734-8387
Socket Head Screw Key

997348387
Z03433 APPENDIX F: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-1965
Riveter B Nosepiece

5120-99-470-0473
Extractor Dowel

994700473
D931: RNCC: 3 | RNVC: 2
27M8137: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-803-0240

5120-99-795-5730
Spanner Wrench

5120-99-807-2082
Socket Wrenc Socket

5120-99-246-6362
Socket Wrench Handle Bar

992466362
00-1026-B117: RNCC: 3 | RNVC: 2

16 Aug 2005

5120-99-837-5464
Hand Screw Jack

998375464
M16092: RNCC: 3 | RNVC: 2
1587986: RNCC: 5 | RNVC: 2
6062100: RNCC: 5 | RNVC: 2
76BB17080AB: RNCC: 5 | RNVC: 2
79BB17080AA: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-186-9651
Socket Wrench

991869651
NO PRIMARY REF 99-186-9651: RNCC: 3 | RNVC: 2
1.9450-395: RNCC: 5 | RNVC: 2
1.9450-395: RNCC: 5 | RNVC: 9

2 Jun 2011

5120-99-756-8836
Open End Wrench

997568836
T.7035-403: RNCC: 3 | RNVC: 2
T7035-403: RNCC: 5 | RNVC: 2
XP990BG0487: RNCC: 6 | RNVC: 9
T7035: RNCC: 6 | RNVC: 9
99PB02-011: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-107-4637
Cross Tip Screwdriver

991074637
B50270-1: RNCC: 3 | RNVC: 2
B50270: RNCC: 5 | RNVC: 2
B50270-1: RNCC: 5 | RNVC: 2
B50270: RNCC: 5 | RNVC: 2
WE128B1: RNCC: 6 | RNVC: 9
SDDP31: RNCC: 6 | RNVC: 9

6 Apr 1999

5120-99-124-3332
Socket Wrench Socket

991243332
AD375: RNCC: 3 | RNVC: 2
MLA212: RNCC: 3 | RNVC: 2
BS4006-TABLE 12 3/8A/F: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-136-1096
Socket Wrench

991361096
558/2/02371/000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-4487
Open End Wrench

991204487
1REFDWGGP261: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-138-5842
Screwdriver Bit Set And Handle

991385842
SSDM80A: RNCC: 3 | RNVC: 2
SSDM80A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-7232
Hexagon Plug

991367232
DPH5: RNCC: 3 | RNVC: 2

19 Oct 1979

5120-99-710-6417
Univers Screwdriver

5120-99-406-2524
Turnlock Fastener Clinching Punch

994062524
A6TOOL2: RNCC: 3 | RNVC: 2
28FP421: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-147-8697
Preset Screwdriver

991478697
015122030000: RNCC: 3 | RNVC: 2
A26760: RNCC: 5 | RNVC: 2
NPPOGAMA4B2080405: RNCC: 6 | RNVC: 9

1 Jun 2005

5120-99-802-0841
Combination Tool

998020841
FV471644: RNCC: 3 | RNVC: 2

17 Apr 1985

5120-99-797-6767
Socket Wrench

997976767
CHA138778: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-795-3668
Screwdriver Assembl

997953668
MBEU73070: RNCC: 3 | RNVC: 2

22 Mar 1995

5120-99-813-1429
Bearing And Bushing Inserter And Remover

998131429
MC1269140: RNCC: 3 | RNVC: 2

25 Jan 2010

5120-99-782-8176
Holding Bar

997828176
502514902: RNCC: 3 | RNVC: 2
502514902: RNCC: 5 | RNVC: 2
502514901: RNCC: 5 | RNVC: 9
502514901: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-801-8756
Spanner Wrench

998018756
FV 473180: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-796-0624
Socket Spann Socket

997960624
019900: RNCC: 3 | RNVC: 2
KM323: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-793-2140
Hand Hydraulic Jack

997932140
EU12: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-781-9844
Specia Ring Spanner

997819844
727261: RNCC: 3 | RNVC: 2
727044: RNCC: 5 | RNVC: 1
44566S: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-802-1229
Wrench Plug And Soc

998021229
FV562773: RNCC: 3 | RNVC: 2

24 May 1977

5120-99-406-2513
Turnlock Fastener Clinching Punch

994062513
A4TOOL3: RNCC: 3 | RNVC: 2
28FP410: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-923-8129
Spanner Wrench

5120-99-204-0108

5120-99-000-7023

5120-99-619-3983

5120-99-799-5944
Drift Set

997995944
460003886: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-802-2619
Oil Seal Replacer

998022619
CK2915: RNCC: 3 | RNVC: 2
FV453601: RNCC: 3 | RNVC: 2

5 Sep 1979

5120-99-194-5748
Spanner Wrench

991945748
A0100665: RNCC: 3 | RNVC: 2
27VA6461: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-826-0811
Distance Piece

998260811
VT10682: RNCC: 3 | RNVC: 2

3 Oct 1977

5120-99-826-4496
Fac Wrench Socket

998264496
83790008: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-839-5255
Socket Wrench

5120-99-120-9863

5120-99-133-5395
Buffer Gland Extraction Tool

991335395
AMP 00 06 51000: RNCC: 3 | RNVC: 2
60202724: RNCC: 5 | RNVC: 2

28 Jun 2005

5120-99-423-4583
Sealin Flat Spanner

994234583
NO PRIMARY REF 99-423-4583: RNCC: 3 | RNVC: 2
9031-71: RNCC: 3 | RNVC: 2
558367: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-757-6177
Face Spanner Wrench Socket

997576177
B408-26-001-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-631-0162
Decarbonising Tool

996310162
NO PRIMARY REF 99-631-0162: RNCC: 3 | RNVC: 2
NTS15033: RNCC: 5 | RNVC: 2
MVEE39092A3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-870-5928
Quick Adjusting Screw Clamp

998705928
135/6: RNCC: 3 | RNVC: 2

3 Oct 1996

5120-99-979-8749
Washer Spray A Tool

999798749
9XD156170102: RNCC: 3 | RNVC: 2

12 Aug 2010

5120-99-120-5977
Auger Extension Rod

991205977
1RESM5318B2-2: RNCC: 3 | RNVC: 1
W8WA6412: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-8013
Hole Sheet Metal Holder

991208013
9150-1600: RNCC: 3 | RNVC: 2
1B5226: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-782-2805
Spanner Ring

997822805
CESNKCS-04-5 3.3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-5911
Screw Thread Insert Inserter

991365911
3552-7: RNCC: 3 | RNVC: 2
11-454-19-10-1741: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-7358
Leatherworker Blade

5120-99-623-9154
Wrench

996239154
A10875: RNCC: 3 | RNVC: 2
FH964C30005: RNCC: 6 | RNVC: 9

19 Nov 1996

5120-99-602-7640
Socket Wrench Socket

996027640
TELM8A: RNCC: 3 | RNVC: 2

16 Apr 2010

5120-99-199-9609
Retaining Ring Pliers

991999609
477AS: RNCC: 3 | RNVC: 2
477.32: RNCC: 5 | RNVC: 2

27 Mar 1996

5120-99-433-2676
Hand Hammer

994332676
W-711: RNCC: 3 | RNVC: 9
00.76.01.35: RNCC: 5 | RNVC: 2

15 Nov 2006

5120-99-438-5872
Spanner Wrench

994385872
CX112948: RNCC: 3 | RNVC: 2
37A8529: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-607-8498
Bea Screw Extractor

996078498
PE53476: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-460-7634
Tool

994607634
A045168: RNCC: 3 | RNVC: 2
27WW226: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-257-5727
Socket Wrench Socket

992575727
BUGGSIE 442: RNCC: 3 | RNVC: 2
442: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-4475
Open End Wrench

991204475
4REFDWGGP261: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-103-1476

5120-99-814-0509

5120-99-830-9513
Remover And Replace

5120-99-546-9189
Key Withdrawal Tool

5120-99-546-9220
Box Wrench

5120-99-376-2409
Hand Rivet Snap

5120-99-438-6041

5120-99-923-8372
Glass Mirror

999238372
SMR: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-382-5003
Box Wrench

993825003
1590997: RNCC: 3 | RNVC: 2

26 Nov 1998

5120-99-826-8095
Socket Span Adaptor

998268095
354381: RNCC: 3 | RNVC: 2
354381: RNCC: 5 | RNVC: 2

16 Jun 1987

5120-99-468-8380
Hook Spanner

994688380
RS181-15: RNCC: 3 | RNVC: 2
27Y2366: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-1766

5120-99-112-1249
Open End Wrench

991121249
NMT-268: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-99-463-5040
Tool Extracting

994635040
NO PRIMARY REF 99-463-5040: RNCC: 3 | RNVC: 2
10373: RNCC: 4 | RNVC: 1
0611-54458: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-782-4537
Spanner

997824537
CES NKCS-05-10 1.1.7: RNCC: 3 | RNVC: 2

1 May 1987

5120-99-701-5048
Torque Wrench

997015048
015120: RNCC: 3 | RNVC: 1
015120: RNCC: 5 | RNVC: 1
S8-85-0700 99/5: RNCC: 5 | RNVC: 2
S8-85-700-99/5: RNCC: 5 | RNVC: 2

3 Feb 1993

5120-99-244-6189
Hand Hydraulic Jack

992446189
WDK 2.5 HLQ: RNCC: 3 | RNVC: 2
040LG-002: RNCC: 6 | RNVC: 9

20 Feb 2004

5120-99-659-5785
Mechanical Puller

996595785
1954T407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-614-3395
Seal Inserter

996143395
MC1248451: RNCC: 3 | RNVC: 2

27 Jan 2011

5120-99-147-8741
Spanner Wrench

991478741
AM 00 06 01038: RNCC: 3 | RNVC: 2
60108345: RNCC: 5 | RNVC: 2

22 Jun 2005

5120-99-104-8860
Open End Wrench

991048860
MBEU11907: RNCC: 3 | RNVC: 2
0MBEU11907: RNCC: 5 | RNVC: 2
27L1852: RNCC: 6 | RNVC: 9
27L1852: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-509-6881
Piston Ring Expander

995096881
OD31870: RNCC: 3 | RNVC: 2

14 Jun 2000

5120-99-122-6180

5120-99-122-9679

5120-99-467-6827
Spanner Wrench

994676827
MT1557: RNCC: 3 | RNVC: 2
27Q24002: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-437-5885
Flat Tip Screwdriver

994375885
BS2559: RNCC: 4 | RNVC: 1
0276-14686: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-024-6786
Torque Wrench Adapter

990246786
29929: RNCC: 3 | RNVC: 2

14 Nov 1992

5120-99-910-4382

5120-99-910-7064

5120-99-194-7200
Spanner Wrench

991947200
W52932C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-208-9472
Inserted Hammer Face

992089472
412AF: RNCC: 3 | RNVC: 2
712AF: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-710-7664
Open End Wrench

997107664
KU12724: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-999-5294

5120-99-999-4272

5120-99-122-6459
Blin Insertion Tool

991226459
NO PRIMARY REF 99-122-6459: RNCC: 3 | RNVC: 2
7480-0085: RNCC: 5 | RNVC: 2

12 Dec 1978

5120-99-541-2920
Spanner'breech

995412920
TL576584: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-205-0207
Bearing And Driver

992050207
NO PRIMARY REF 99-205-0207: RNCC: 3 | RNVC: 2
470333: RNCC: 5 | RNVC: 2
470333: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-581-6474
Spanner Wrench

995816474
1-100-437: RNCC: 3 | RNVC: 2
CM10045: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-211-9922
Tool

992119922
WG0068-0753-045W142J10: RNCC: 3 | RNVC: 2

1 Apr 1999

5120-99-715-0112
Spring Inserter And Remover

997150112
MBEU4361PA: RNCC: 3 | RNVC: 2
CMBEU4361PA: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-710-3883
Torque Wrench

997103883
PE25479: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-205-7164
Fuze Extractor

992057164
FV3202704: RNCC: 3 | RNVC: 2
RE 17 FE 82: RNCC: 5 | RNVC: 2
1ED24803: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-373-1128
Spanner Wrench

993731128
J04400002-ITEM-065: RNCC: 3 | RNVC: 2

26 Feb 2013

5120-99-659-6901
Shroud

996596901
48421A43/405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-192-1986
De-Peening Punch

991921986
PP/J 1055 LB: RNCC: 3 | RNVC: 2
0625P-052: RNCC: 6 | RNVC: 9
0625P-077: RNCC: 6 | RNVC: 9
062CE-031: RNCC: 6 | RNVC: 9
99-666-6725: RNCC: 6 | RNVC: 9
062KT-082: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-522-0505
Seal Installation Tool

995220505
S3S18379000: RNCC: 3 | RNVC: 2
S3S18379000: RNCC: 5 | RNVC: 2
S3S18379000: RNCC: 5 | RNVC: 2

7 Jun 1993

5120-99-255-7023
Extension Bar

992557023
80-461-02090-421: RNCC: 3 | RNVC: 2
VPL 20225A: RNCC: 5 | RNVC: 1
T.740/32: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-262-9447
Slip Gauge 1.35

992629447
AITG-1750-A4: RNCC: 3 | RNVC: 2

19 Oct 2000

5120-99-729-0236
Spanner Wrench

997290236
13/Y/556/0090/0901/110: RNCC: 3 | RNVC: 2
Y/556/0090/0901/110: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-607-9736
Turbi Assembly Tool

996079736
PE54327: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-471-6171
Mechanical Puller

994716171
QZ13691: RNCC: 3 | RNVC: 2

29 Nov 2011

5120-99-310-3157
Face Spanner Wrench Socket

993103157
DRT 68254: RNCC: 3 | RNVC: 2

15 Sep 2009

5120-99-470-3478

5120-99-470-3476

5120-99-931-5794
Oper Lever Assembly

999315794
133094: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-655-1572
Mechanical Puller

996551572
460009237B: RNCC: 3 | RNVC: 2

13 Jan 1981

5120-99-135-6299
Insertion And Extra

991356299
B512908: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-882-1181

5120-99-860-2352

5120-99-902-3330
Socket Head Scr Key

5120-99-910-6457

5120-99-519-6437
Open End Wrench

995196437
TA1022: RNCC: 3 | RNVC: 2
AP22229: RNCC: 6 | RNVC: 9
10G416: RNCC: 6 | RNVC: 9
5815-99N31-2888: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6588
Machinist's Vise

999106588
DEFSTAN51-11 PART 21: RNCC: 4 | RNVC: 1
H20335: RNCC: 5 | RNVC: 2
NO.1 VICE: RNCC: 5 | RNVC: 2
602-252: RNCC: 5 | RNVC: 2
1: RNCC: 5 | RNVC: 2
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2953: RNCC: 6 | RNVC: 9
H2953: RNCC: 6 | RNVC: 9
F1FA19511: RNCC: 6 | RNVC: 9
1C5532: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-127-9541
Box Wrench

991279541
RH2528: RNCC: 3 | RNVC: 2
DDA2089: RNCC: 5 | RNVC: 2
X1D1618: RNCC: 6 | RNVC: 9
0277-277020: RNCC: 6 | RNVC: 9
1L317: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-631-4894
Rive Upsetting Tool

996314894
J259: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-131-6827
Fuel Filt Extractor

991316827
S3S14686000: RNCC: 3 | RNVC: 2

8 Jul 2003

5120-99-213-5532
Spring Inserter And Remover

992135532
TA30087: RNCC: 3 | RNVC: 2

27 Oct 2010

5120-99-836-7680
Hand Hydraulic Jack

998367680
ATD5-220M: RNCC: 3 | RNVC: 2
M0027952: RNCC: 5 | RNVC: 2

7 May 2010

5120-99-471-1189
Tool

994711189
NO PRIMARY REF 99-471-1189: RNCC: 3 | RNVC: 2
10AG111: RNCC: 5 | RNVC: 2

18 Jan 1977

5120-99-215-9111
Spanner Wrench

992159111
MS21832: RNCC: 3 | RNVC: 2
FV2206172: RNCC: 5 | RNVC: 2
DS/N/1041: RNCC: 7 | RNVC: 1

19 Aug 1997

5120-99-424-0976
Box Wrench

994240976
F199406: RNCC: 3 | RNVC: 2
F199406: RNCC: 5 | RNVC: 9
26FX95304: RNCC: 6 | RNVC: 9
26FX95304: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-318-7273
Screwdriver Bit

993187273
029790: RNCC: 3 | RNVC: 2
FP184: RNCC: 6 | RNVC: 9

27 Oct 2009

5120-99-563-8008
Torque Screwdriver

995638008
015903: RNCC: 3 | RNVC: 1
TLS1360 SD ESD: RNCC: 5 | RNVC: 1

7 Feb 2007

5120-99-449-0185
Socket Wrench Socket

994490185
EB338: RNCC: 3 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9
851690: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-930-5462
Torque Wrench

999305462
715394: RNCC: 3 | RNVC: 2
715394: RNCC: 5 | RNVC: 2

4 Jul 1991

5120-99-825-3214
Rev Tool Withdrawal

998253214
WE1897: RNCC: 3 | RNVC: 2

1 Mar 1977

5120-99-148-5017
Torque Wrench Adapter

991485017
DRT 68501: RNCC: 3 | RNVC: 2

3 Jun 2009

5120-99-826-5376
Valv Insertion Tool

998265376
VT12803: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-928-8024
Socket Wrench Handle

999288024
DRT 68353: RNCC: 3 | RNVC: 2
DRT68353: RNCC: 6 | RNVC: 9

3 Jun 2009

5120-99-624-9510
Television F Pliers

996249510
077419: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-617-2137
Mechanical Puller

996172137
NCU9160A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-611-3125
Combination Open End And Spanner Wrench

996113125
IS5771: RNCC: 3 | RNVC: 2
SW221D1: RNCC: 6 | RNVC: 9

6 Jan 1993

5120-99-860-8593

5120-99-220-8917
Spanner Wrench

992208917
AJT3850: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-664-6669
Spanner Wrench

996646669
NDN 9647-04: RNCC: 3 | RNVC: 2
NDN 9647-04: RNCC: 3 | RNVC: 9

25 Apr 1991

5120-99-471-0388
Valve Spout

994710388
NO PRIMARY REF 99-471-0388: RNCC: 3 | RNVC: 2
1A4609: RNCC: 5 | RNVC: 2
TYPE S675: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-9069
Assembly Post

994119069
NO PRIMARY REF 99-411-9069: RNCC: 3 | RNVC: 2
ST1666: RNCC: 5 | RNVC: 9
27Q12299: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-130-0436
Screwdriver Bit

991300436
BS2559 PART 2 AND 5: RNCC: 4 | RNVC: 1
DEFSTAN51-11PT26: RNCC: 5 | RNVC: 1
958: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-954-0196

5120-99-144-8412
Leg S Rotating Tool

991448412
NO PRIMARY REF 99-144-8412: RNCC: 3 | RNVC: 2
460002393: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-655-3781
Mechanical Puller

996553781
CHA754-127-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-746-1093
Main Rotor Bla Tool

997461093
EA6705G553-041: RNCC: 3 | RNVC: 2
1MEVGE4: RNCC: 6 | RNVC: 9

10 Apr 2004

5120-99-363-2176
Torque Wrench Adapter

993632176
29736: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-99-814-8253
Spanner Wrench

998148253
FV 38900: RNCC: 3 | RNVC: 2
LV9AHYFV38900: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-803-8535
Bearing And Bushing Inserter And Remover

998038535
LC 396: RNCC: 3 | RNVC: 2

6 Jan 1994

5120-99-805-9203
Turbocharg Tool Kit

998059203
886 AND 887: RNCC: 3 | RNVC: 2
886 AND 887: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-721-1766
Spanner Wrench

997211766
TC2585: RNCC: 3 | RNVC: 2

12 Jun 1992

5120-99-710-4250
Bearing And Bushing Driver

997104250
PE8812: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-316-3312
Eccentric Lever

993163312
PC24220: RNCC: 3 | RNVC: 2
PC24220: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-553-0495
Extractor Seat Hous

995530495
A1010002: RNCC: 3 | RNVC: 2

15 Nov 2001

5120-99-617-1849
Mechanical Puller

996171849
HU17705: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-761-5338
Tool

997615338
12A/2451: RNCC: 3 | RNVC: 2

29 Aug 1995

5120-99-763-7947
Spanner Wrench

997637947
332/U5668: RNCC: 3 | RNVC: 2

1 Apr 2009

5120-99-924-8066
Craftsman's Tweezers

999248066
CP14604: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-147-3785
Central M Extractor

991473785
452-65219-000: RNCC: 3 | RNVC: 2
FV2206148: RNCC: 5 | RNVC: 2
DS/N/1041: RNCC: 7 | RNVC: 1

12 Aug 1997

5120-99-728-1966
Installation Tool

997281966
558/1/09599/000: RNCC: 3 | RNVC: 2
558/4/09599/000: RNCC: 5 | RNVC: 2

22 Oct 1987

5120-99-665-8779
Drive Pin Punch

996658779
W 5747 228D: RNCC: 3 | RNVC: 2
W 5747 228D: RNCC: 5 | RNVC: 2

6 Feb 2003

5120-99-947-5232
Socket Wrench

999475232
T0AE1Y2693442-1: RNCC: 3 | RNVC: 2
Y2693442-1: RNCC: 5 | RNVC: 2
Y2693442-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-725-7421
Solistrand Nest

997257421
525150-2: RNCC: 3 | RNVC: 2
1M/2003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-875-3029
Socket Wrench Socket

998753029
331/33697: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-999-5089
Socket Head Scr Key

5120-99-841-5654

5120-99-792-5332
Spanner

997925332
07120040: RNCC: 3 | RNVC: 2
120040: RNCC: 5 | RNVC: 2
07120040: RNCC: 5 | RNVC: 2
07120040: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-776-7485
Spanner Wrench

997767485
43769905: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-785-1515
Thermo Gun

997851515
H22832: RNCC: 3 | RNVC: 2
CV1972: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-826-5653
Puller Input Seal

998265653
FV1030066: RNCC: 3 | RNVC: 2
91LM229: RNCC: 5 | RNVC: 2

23 Dec 1982

5120-99-974-8630
Socket Wrench Socket

999748630
SBM055Z: RNCC: 3 | RNVC: 2

10 Oct 2001

5120-99-837-7294
Pulley Nut Adaptor

998377294
J23126: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-960-0848
Socket Wrench

999600848
AN42084: RNCC: 3 | RNVC: 2
AN42084: RNCC: 5 | RNVC: 2
M2AN42084: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-1542
Lathe Chuck Key

994541542
NO PRIMARY REF 99-454-1542: RNCC: 3 | RNVC: 2
W4WD05154: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-549-2451
Socket Wrench Extension

995492451
P-892414-003: RNCC: 3 | RNVC: 2
P892414-003: RNCC: 5 | RNVC: 2

18 Jan 2001

5120-99-554-0601
Box Wrench

995540601
SSN07Z520-41-19-6: RNCC: 3 | RNVC: 2
SSN07Z520-41-19-6-6: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-660-8134
Spanner Wrench

996608134
T1294: RNCC: 3 | RNVC: 2

7 Jul 2000

5120-99-739-7981
Seal Inserter

997397981
FV 2030549: RNCC: 3 | RNVC: 2
7L4949: RNCC: 5 | RNVC: 2

19 Jun 1986

5120-99-739-7982
Socket Wrench Handle Bar

997397982
FV 2030090: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-1467
Pressing Pin

997691467
326356: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-406-2509
Clinching Pun Block

994062509
A4BLOCK1: RNCC: 3 | RNVC: 2
SS632A1: RNCC: 6 | RNVC: 9
28FP406: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-2233
Mechanical Puller

996592233
460009420D: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-695-2782
Wheel Brace

996952782
260.774: RNCC: 3 | RNVC: 2
992970003: RNCC: 6 | RNVC: 9
260.774: RNCC: 6 | RNVC: 9

2 Nov 1999

5120-99-779-4845

5120-99-910-4729
Awl Handle

999104729
A3/9898: RNCC: 3 | RNVC: 1
H 1295: RNCC: 6 | RNVC: 9
FA14345: RNCC: 6 | RNVC: 9
1A20: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-750-3604
Alignment Tool

997503604
289-010140-0: RNCC: 3 | RNVC: 2
1600AM: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-750-2451
Open End Wrench

997502451
289-010370-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-901-5150
Guide

999015150
AP61891: RNCC: 3 | RNVC: 2
118253ST: RNCC: 6 | RNVC: 9

5 Feb 1990

5120-99-901-2265
Hand Reel Jack

999012265
TL145: RNCC: 3 | RNVC: 1
CN2757: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-930-0575
Picket Extractor

999300575
MEXECSK31744: RNCC: 1 | RNVC: 2
C15352: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-958-3867
Screwdriver Bit

999583867
029750: RNCC: 3 | RNVC: 2
FP184: RNCC: 6 | RNVC: 9

26 Oct 2009

5120-99-900-7971
Socket Wrench

999007971
56M: RNCC: 3 | RNVC: 2
1EB67267: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-958-7652
Ratchet Wrench

999587652
ZZ031048452: RNCC: 3 | RNVC: 2

11 Sep 2012

5120-99-978-2843
Mechanical Jack Handle

999782843
ABR5872: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-978-1162
Wheel Bolt Remover

999781162
CF4401838: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-977-3685
Mechanical Puller

999773685
01TC11039: RNCC: 3 | RNVC: 2
01TC11039: RNCC: 6 | RNVC: 9

14 Sep 1989

5120-99-607-9738
Bearing And Bushing Inserter

996079738
PE54344: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-126-6442
Hand Cocking Tool

991266442
AEI 3114/G/09: RNCC: 3 | RNVC: 2
98PB01373: RNCC: 6 | RNVC: 9

23 Feb 1998

5120-99-676-3833
Allen Key

996763833
N 5701 006: RNCC: 3 | RNVC: 2

28 Jan 1999

5120-99-734-9109
Distance Sleeve

997349109
00861145: RNCC: 3 | RNVC: 2

13 Aug 1999

5120-99-668-7367
Socket Head Screw Key

996687367
KEN6017660K: RNCC: 3 | RNVC: 2
3007379: RNCC: 5 | RNVC: 2

28 Feb 2013

5120-99-130-2217
Socket Wrench Crowfoot Attachment

991302217
1950M14MM: RNCC: 3 | RNVC: 2
1950M-14: RNCC: 5 | RNVC: 2
10W50003: RNCC: 6 | RNVC: 9
440-14: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4272
Socket Wrench Socket

999104272
BS4006: RNCC: 4 | RNVC: 1
1L162: RNCC: 6 | RNVC: 9
FA17580: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4565: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-743-0035
Open End Wrench

997430035
3201-86450-20-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-665-6648
Spec Clamping Belt

996656648
17229018-0: RNCC: 3 | RNVC: 2
17229018-0: RNCC: 5 | RNVC: 2
021JB-036: RNCC: 6 | RNVC: 9

23 May 2002

5120-99-944-3076
Socket Wrench Handle Bar

999443076
405487A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-245-4787
Flat Tip Screwdriver

992454787
NMT-120: RNCC: 3 | RNVC: 2

3 Dec 1998

5120-99-468-6718
Shovel Pick

994686718
480-0005-01: RNCC: 3 | RNVC: 2
4800005: RNCC: 5 | RNVC: 2
110AG32832: RNCC: 6 | RNVC: 9

10 Jan 1991

5120-99-146-2873
Face Spanner Wrench Socket

991462873
S6170-10092-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-194-1718
Elec Tool Alignment

991941718
3201-85738-20-2: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-782-2806
Open Jaw Spanner

997822806
CESNKCS-04-5 3.4: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-545-3333
Torque Wrench

995453333
900216-0080: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-769-8051
Pliers

997698051
48421-A61/405: RNCC: 3 | RNVC: 2
48421A61-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-910-5851
Swivel Knob Jeweler's Screwdriver

999105851
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
FA16783: RNCC: 6 | RNVC: 9
1C5086: RNCC: 6 | RNVC: 9
H2272: RNCC: 6 | RNVC: 9
H2272: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2272: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-758-0033
Socket Wrench Spanner Attachment

997580033
P-890754-403: RNCC: 3 | RNVC: 2
P890754-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-133-5229
Preset Screwdriver

991335229
015102031140: RNCC: 3 | RNVC: 2
A26690: RNCC: 5 | RNVC: 2
NPPOGAMA4B2080405: RNCC: 6 | RNVC: 9

1 Jun 2005

5120-99-150-1341
Torque Wrench Adapter

991501341
110079-16219: RNCC: 3 | RNVC: 2
110079-16219: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-360-4374
Fork Spanner

993604374
916076: RNCC: 3 | RNVC: 2

12 Jan 1993

5120-99-718-8281
Socket Wrench Handle

997188281
1700060: RNCC: 1 | RNVC: 2
404S: RNCC: 3 | RNVC: 2
KM5: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-552-2273
Spanner Wrench

995522273
1256-90-ITEM 18: RNCC: 3 | RNVC: 2
1256-90-18: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-923-1193
Cable Jointin Mould

999231193
NO PRIMARY REF 99-923-1193: RNCC: 3 | RNVC: 2
822-3130: RNCC: 5 | RNVC: 2
0461-923-1193: RNCC: 6 | RNVC: 9

4 Aug 1976

5120-99-192-7059
Torque Wrench Adapter

991927059
JA5134: RNCC: 3 | RNVC: 2
JA5134: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-434-9418
Socket Wrench Socket

994349418
BS4006-TABLE 17 3/4A/F: RNCC: 4 | RNVC: 1
F1FA17459: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-552-9299
Box Wrench

995529299
C.6560 ITEM 2: RNCC: 3 | RNVC: 2
C.6560-2: RNCC: 5 | RNVC: 2
469-291816: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-461-8418
Extractor Piston

994618418
A0101130: RNCC: 3 | RNVC: 2
27G5395: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-471-2419
Breaker Bar

994712419
NO PRIMARY REF 99-471-2419: RNCC: 3 | RNVC: 2
L112E: RNCC: 5 | RNVC: 2
C569-70T269333: RNCC: 6 | RNVC: 9

10 Apr 2002

5120-99-254-4362
Torque Wrench

992544362
B62830: RNCC: 3 | RNVC: 2
QS6-50: RNCC: 5 | RNVC: 1
1C-8734: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-062-5735
Extractor

990625735
33185J: RNCC: 3 | RNVC: 2

23 Aug 1990

5120-99-031-7399
Socket Wrench

990317399
905.3.15.105.1: RNCC: 3 | RNVC: 2
905.3.15.105.1: RNCC: 5 | RNVC: 2

11 May 1995

5120-99-743-0034
Open End Wrench

997430034
3201-86451-20-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-501-1535
Socket Wrench Screwdriver Attachment

995011535
3-4819-8-155: RNCC: 3 | RNVC: 2

5 Dec 1994

5120-99-591-3026
Socket Wrench

995913026
767992 ITEM 45: RNCC: 3 | RNVC: 2
768011: RNCC: 5 | RNVC: 1
767992: RNCC: 5 | RNVC: 1
767992/45: RNCC: 5 | RNVC: 2
ES111A2: RNCC: 6 | RNVC: 9

16 May 1995

5120-99-500-8450
Lamp Extractor

995008450
CSDE/TOR/GSS 144: RNCC: 3 | RNVC: 2
PA01577: RNCC: 6 | RNVC: 9

27 Jan 1998

5120-99-406-2511
Turnlock Fastener Clinching Punch

994062511
A4TOOL1: RNCC: 3 | RNVC: 2
28FP408: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-2646
Spanner Wrench

994542646
FHQ760: RNCC: 3 | RNVC: 2
BFHQ760: RNCC: 5 | RNVC: 2
27KF2748: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-204-8390
Trigger Guide

992048390
116715C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-9403
Socket Wrench Socket

991229403
01010032: RNCC: 3 | RNVC: 2
01010032: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-288-6734
Spanner Wrench

992886734
554701: RNCC: 3 | RNVC: 2
554701: RNCC: 6 | RNVC: 9
992K90043: RNCC: 6 | RNVC: 9

15 Feb 2000

5120-99-662-7298
Tool Installation

5120-99-547-7103
Flat Tip Screwdriver

995477103
1-67-401: RNCC: 3 | RNVC: 2

22 Jun 2000

5120-99-631-9600
Special Screwdriver

996319600
5CB104333: RNCC: 3 | RNVC: 2
H22310: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-623-9392
Cup Plug Mandrel

996239392
EB001231: RNCC: 3 | RNVC: 2

1 Jul 1997

5120-99-144-4274
Winding Tool

5120-99-120-4481
Open End Wrench

991204481
1REFDWGGP261: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-136-5024
Socket Wrench Screwdriver Attachment

991365024
A33-5M: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 26: RNCC: 4 | RNVC: 1
H6852: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-789-7770
Extractor

997897770
T545366: RNCC: 3 | RNVC: 2
CH748-2725: RNCC: 5 | RNVC: 2
CUTA2500103B: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-769-5239
Clutch Se Protector

997695239
J24216-01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-740-1014
Torque Wrench Adapter

997401014
CBD12636P01: RNCC: 3 | RNVC: 2
CBD12636P01 DETAIL 001: RNCC: 5 | RNVC: 2
CBD12636P01/001: RNCC: 5 | RNVC: 2
0707B-080: RNCC: 6 | RNVC: 9

6 Apr 2001

5120-99-607-4833
Fi Open Jaw Spanner

996074833
PE16300: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-750-3523
Box Wrench

997503523
290-025450-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-4801
Hand Caulking Tool

999104801
C00RDPATH1436: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H1436: RNCC: 6 | RNVC: 9
H1436: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-568-7446
Torque Wrench Adapter

995687446
012165: RNCC: 3 | RNVC: 2
709-0882: RNCC: 5 | RNVC: 2
709-0882: RNCC: 5 | RNVC: 2

4 Jul 2002

5120-99-807-1306
Socket Wrench Adapter

998071306
LRT-57-008: RNCC: 3 | RNVC: 2
LST123: RNCC: 5 | RNVC: 2
LRT-57-008/1: RNCC: 5 | RNVC: 2

8 May 1992

5120-99-733-9688
Extractor

997339688
558/1/07494: RNCC: 3 | RNVC: 2
558-1-07494: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-131-8773
Spanner Wrench

991318773
MBEU185669: RNCC: 3 | RNVC: 2

23 Mar 2004

5120-99-300-1250
Mechanical Puller

993001250
ET556307: RNCC: 3 | RNVC: 2

5 Nov 1990

5120-99-963-3535

5120-99-963-7425
Jammed Removing Key

5120-99-805-5702

5120-99-963-1818

5120-99-771-5584
Flat Ti Screwdriver

5120-99-774-7734

5120-99-194-5085

5120-99-774-9115
Oil Seal Replacer

5120-99-713-7792

5120-99-700-1953

5120-99-623-6420
Locking Tool

5120-99-542-7145

5120-99-735-7975
Open End Wrench

997357975
OPW 220: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-755-1316
Spanner Wrench

997551316
UX25005: RNCC: 3 | RNVC: 2
UX25005RRA: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-1009
Box Wrench

991381009
XBM1214: RNCC: 3 | RNVC: 2
XM1214: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-152-7490
Socket Wrench Socket

991527490
DELC46L: RNCC: 3 | RNVC: 2
12400028085: RNCC: 5 | RNVC: 2

18 Nov 2011

5120-99-120-2683
Mechanical Puller Attachment

991202683
HP319E: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-144-3560
Adjusting Brace

5120-99-114-5362
Socket And Adaptor

991145362
KU12800A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-835-0411
Test Block

998350411
V2909-1: RNCC: 3 | RNVC: 2

4 Jan 1980

5120-99-607-6101
Extractor Assy

996076101
PE29803: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-459-0544
Box Wrench

994590544
KU.13053: RNCC: 3 | RNVC: 2
KU12885: RNCC: 6 | RNVC: 9
64SY1313: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-963-8889
Flat Tip Screwdriver

999638889
C1W725: RNCC: 3 | RNVC: 1
UUA1273: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-958-3481

5120-99-867-5037

5120-99-910-4612
Blacksmith's Bottom Fuller

999104612
S34: RNCC: 3 | RNVC: 2
FA13747: RNCC: 6 | RNVC: 9
H913: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-798-3858
Grat Retrieval Tool

5120-99-820-6851

5120-99-768-2455

5120-99-087-5015
Spanner Wrench

990875015
121E.93.878.000: RNCC: 3 | RNVC: 2

18 Oct 1996

5120-99-826-4199

5120-99-539-4646
Open End Wrench

995394646
S99-2459: RNCC: 3 | RNVC: 2
99-2459: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-867-0903
Filter Tool

998670903
EX001: RNCC: 3 | RNVC: 2

30 Jun 2005

5120-99-851-5228
Torque Wrench

998515228
13268: RNCC: 3 | RNVC: 2

14 Sep 2009

5120-99-880-0217
Torque Wrench Adapter

998800217
012045: RNCC: 3 | RNVC: 2

1 Sep 2004

5120-99-373-0754
Open End Wrench

993730754
DA25863: RNCC: 3 | RNVC: 2

28 Nov 2006

5120-99-139-7066
Socket Head Screw Key

991397066
ALLEN KEY 9/16 IN HEX AF: RNCC: 3 | RNVC: 2
BS2470: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-219-2570
Torque Meas Adaptor

992192570
DR3180-0044-SA: RNCC: 3 | RNVC: 2

16 Apr 1993

5120-99-784-5577
Open Jaw Spanner

997845577
NO PRIMARY REF 99-784-5577: RNCC: 3 | RNVC: 2
41MM: RNCC: 5 | RNVC: 2
56-6/3-005: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-434-7312
Socket Wrench Socket

994347312
BS4006-TABLE 13 15MM: RNCC: 4 | RNVC: 1
EBM15: RNCC: 5 | RNVC: 2
HSM215: RNCC: 5 | RNVC: 2
SWM151 LOCK-ON: RNCC: 6 | RNVC: 9
F1FA17640: RNCC: 6 | RNVC: 9
1L260: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-543-8866
Drive Bar

995438866
100009-0606-002: RNCC: 3 | RNVC: 2
683GA26663-000: RNCC: 5 | RNVC: 2

16 Oct 1984

5120-99-659-6603
Torque Wrench Adapter

996596603
P-891066-405: RNCC: 3 | RNVC: 2
P891066-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-747-5657
Bearing And Bushing Remover

997475657
P-891144-407: RNCC: 3 | RNVC: 2
P891144-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-560-5315
Socket Wrench Socket

995605315
A26: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-130-3328
Ratchet Screwdriver

991303328
233H: RNCC: 3 | RNVC: 2
H21280: RNCC: 5 | RNVC: 2
51S70003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-1020
Socket Wrench Socket

991381020
FM14: RNCC: 3 | RNVC: 2
FM14 LOCK-ON: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-251-7384
Torque Wrench

992517384
010620: RNCC: 3 | RNVC: 2
D12052: RNCC: 5 | RNVC: 2
DDS800S: RNCC: 5 | RNVC: 2
010620: RNCC: 5 | RNVC: 2
D12050: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-400-0673
Fixture

994000673
800841T1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-679-8248
Con Extraction Tool

996798248
DCF.91.070.2LT: RNCC: 3 | RNVC: 2

6 Mar 2004

5120-99-613-9445
Punch Pin

996139445
957315: RNCC: 3 | RNVC: 2

12 Jan 1993

5120-99-333-8105
Bearing And Bushing Remover

993338105
S3S20348000: RNCC: 3 | RNVC: 2

20 Feb 2003

5120-99-300-1471
Punch

993001471
A6TOOL5: RNCC: 3 | RNVC: 2

4 Dec 1990

5120-99-665-4639
Hand Hydraulic Jack

996654639
ZA50001842: RNCC: 3 | RNVC: 2
013BM0001: RNCC: 6 | RNVC: 9

7 Dec 2001

5120-99-459-0576
Extractor

994590576
HW18677: RNCC: 3 | RNVC: 2
64VV791: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-554-5464
Dummy Injector

995545464
Y3J70804A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-962-2664
Spanner Wrench

999622664
FV 578781: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-9690

5120-99-700-8781
Screwdriver

5120-99-143-7088

5120-99-138-6863

5120-99-659-9370
Mechanical Puller

996599370
460009321D: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-120-4843
Pipe Wrench

991204843
H6253: RNCC: 2 | RNVC: 9

25 Apr 1991

5120-99-254-5076
Mechanical Puller

992545076
HU29576: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-99-411-1419
Tube Brush

994111419
226L66375-M00: RNCC: 3 | RNVC: 2

7 Jul 2004

5120-99-428-9703
Fish Tape

994289703
690: RNCC: 3 | RNVC: 1
F1FA17990: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-869-3886
Screwdriver Bit

5120-99-910-5409

5120-99-962-9910

5120-99-375-0106
Cross Tip Screwdriver

993750106
1055-010: RNCC: 3 | RNVC: 2
02162-002: RNCC: 6 | RNVC: 9

16 Apr 2002

5120-99-476-6010
Torque Wrench

994766010
011012: RNCC: 3 | RNVC: 1
TSN25A(L/H) + 031340: RNCC: 5 | RNVC: 1
TSN25A(STT) + 031340: RNCC: 5 | RNVC: 1

19 Feb 2007

5120-99-257-9857
Bearing And Bushing Remover

992579857
LRT-37-022: RNCC: 3 | RNVC: 2
FH964410004: RNCC: 6 | RNVC: 9

17 Apr 1996

5120-99-659-5516
Spanner Wrench

996595516
558-2-03458B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-771-6112
Pliers

997716112
M22525/2-01: RNCC: 3 | RNVC: 2

21 Feb 1997

5120-99-146-2816
Face Spanner Wrench Socket

991462816
S6170-65019: RNCC: 3 | RNVC: 2
26SH1462816: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-551-4469
Pin Centering Tool

995514469
EA6605G510-041: RNCC: 3 | RNVC: 2

7 Dec 2006

5120-99-549-9956
Torque Attachment

995499956
NO PRIMARY REF 99-549-9956: RNCC: 3 | RNVC: 2
Z140TD729509: RNCC: 5 | RNVC: 2
10MR5001711: RNCC: 6 | RNVC: 9

23 Aug 2005

5120-99-654-2977
Yoke

996542977
P-890176-001: RNCC: 3 | RNVC: 2
P890176-001: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-611-3333
Conversion Kit

996113333
LRT-37-002: RNCC: 3 | RNVC: 2
FH964410001: RNCC: 6 | RNVC: 9

17 Apr 1996

5120-99-139-7056
Socket H Wrench Key

5120-99-860-5245
Tool

998605245
95485: RNCC: 3 | RNVC: 2

11 Jul 1996

5120-99-015-8502
Insertion-Extractio

990158502
DEFSTAN59-56PT1-1: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-558-4747
Socket Wrench Handle Bar

995584747
SU1324-15: RNCC: 3 | RNVC: 2
12-74969: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-127-6112
Socket Wrench Socket

991276112
MLW207: RNCC: 3 | RNVC: 2
AD820: RNCC: 3 | RNVC: 2
BS4006-TABLE 10 7/16WHIT: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-886-2294
Seal Remover

998862294
21-051: RNCC: 3 | RNVC: 2

7 Jun 2002

5120-99-245-0566
Insertion-Extractio

992450566
246: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-556-0360
Spanner Wrench

995560360
521703-80: RNCC: 3 | RNVC: 2
106-446770: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-290-7098
Torque Wrench

992907098
80039900: RNCC: 3 | RNVC: 2
MOTORQ399: RNCC: 5 | RNVC: 2
MOTORQ399: RNCC: 5 | RNVC: 2

11 Jul 2012

5120-99-748-2874
Mandrel

997482874
FV3027081: RNCC: 3 | RNVC: 2
FL9804A0014: RNCC: 6 | RNVC: 9

16 Mar 1998

5120-99-436-4918
Combinat Centre Key

994364918
3B2388: RNCC: 3 | RNVC: 2
299: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-213-2561
Socket Head Screw Key

992132561
00223/30035: RNCC: 3 | RNVC: 2
00223/30035: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-423-8230
Socket Wrench

994238230
15894: RNCC: 3 | RNVC: 2
558600: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-097-6540

5120-99-921-6916
Mechanical Puller

999216916
18646J: RNCC: 3 | RNVC: 2

15 May 1991

5120-99-137-5725
Hand Terminal Crimping Tool

991375725
C46470: RNCC: 3 | RNVC: 2
46470: RNCC: 5 | RNVC: 2
46470: RNCC: 5 | RNVC: 2
1H846: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-538-7928
Hand Hammer

995387928
BS876: RNCC: 4 | RNVC: 1

30 Jul 1991

5120-99-732-5317
Hand Terminal Crimping Tool

997325317
2684: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-739-0892
Triwing Screwdriver

997390892
074.171.00: RNCC: 3 | RNVC: 2

7 Jun 1996

5120-99-733-2772
Peen Tool

997332772
460003978: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-731-2184
Location Base

997312184
FV2090365: RNCC: 3 | RNVC: 2
AT61418: RNCC: 5 | RNVC: 2

11 Apr 1986

5120-99-142-3654

5120-99-810-6713
Bearing Rac Remover

998106713
18G705: RNCC: 3 | RNVC: 2
18G705: RNCC: 5 | RNVC: 2

25 Apr 1991

Load More Results