What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 15 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 15 of 108

5120-99-823-6924
Oil Seal Extractor

998236924
14811: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-824-5714
Socket Wrench Handle Bar

998245714
ZSC7571: RNCC: 3 | RNVC: 2
CF9500802: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-544-2656
Spanner Wrench

5120-99-536-4101
Bushings Remov Tool

5120-99-150-0026
Fi Open Jaw Spanner

991500026
AE0730: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-418-5739
Socket Wrench Spanner Attachment

994185739
T2BG5174: RNCC: 3 | RNVC: 2

21 Sep 2006

5120-99-120-3560
Socket Wrench Ratchet Attachment

991203560
E67: RNCC: 3 | RNVC: 2
A180414D: RNCC: 5 | RNVC: 1
1703077: RNCC: 5 | RNVC: 2
T2EL1978: RNCC: 5 | RNVC: 2
OD.25022: RNCC: 5 | RNVC: 2
H20106: RNCC: 5 | RNVC: 2
E66: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9
B11G0277: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-251-0865
Sleeve

992510865
1055: RNCC: 3 | RNVC: 1
1055: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-979-2403
C Clamp

999792403
J81355: RNCC: 3 | RNVC: 2

23 Oct 2009

5120-99-715-9458
Mechanical Puller

997159458
S6172-35004-1: RNCC: 3 | RNVC: 2
S6172-35004: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-5627
Grommet Die

999105627
NO PRIMARY REF 99-910-5627: RNCC: 3 | RNVC: 2
A57660-1: RNCC: 5 | RNVC: 2
ADSPEC1097: RNCC: 6 | RNVC: 9
0273-910-5627: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-705-6422
Drive Socket

997056422
NO PRIMARY REF 99-705-6422: RNCC: 3 | RNVC: 2
IM382 SNAP ON: RNCC: 5 | RNVC: 2
C569-70T279501: RNCC: 6 | RNVC: 9

8 Jun 2002

5120-99-344-3527
Hand Rivet Set

993443527
110079-9573: RNCC: 3 | RNVC: 2
26VC-95898: RNCC: 6 | RNVC: 9

28 Mar 2002

5120-99-910-6059
Socket Head Screw Key

999106059
BS2470: RNCC: 4 | RNVC: 1
H4265: RNCC: 5 | RNVC: 1
G5: RNCC: 5 | RNVC: 2
H20073: RNCC: 5 | RNVC: 2
TABLE 8 5/64A/F SHORT SERIES: RNCC: 6 | RNVC: 9
FA19611: RNCC: 6 | RNVC: 9
1C6243: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-724-5106
Lamp Cap Extractor

997245106
WG0068-0400-049W142B07: RNCC: 3 | RNVC: 2

11 Jan 2006

5120-99-535-9345
Jaws

995359345
NO PRIMARY REF 99-535-9345: RNCC: 3 | RNVC: 2
734-012: RNCC: 5 | RNVC: 2

19 Sep 2001

5120-99-567-1197
Socket Head Screw Key

995671197
NO PRIMARY REF 99-567-1197: RNCC: 3 | RNVC: 2
190509: RNCC: 5 | RNVC: 2

26 Nov 2009

5120-99-937-5556
Socket Head Screw Key

999375556
NMT-186: RNCC: 3 | RNVC: 2

1 Dec 1998

5120-99-179-8412
Open End Wrench

991798412
NO PRIMARY REF 99-179-8412: RNCC: 3 | RNVC: 2
Y173: RNCC: 5 | RNVC: 2
Y173: RNCC: 6 | RNVC: 9

30 Aug 1991

5120-99-122-5687
Box Wrench

991225687
X1-1012: RNCC: 3 | RNVC: 2
X1-1012: RNCC: 5 | RNVC: 2
XI1012: RNCC: 6 | RNVC: 9
1C8098: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-155-5893
Adjustable Wrench

991555893
NO PRIMARY REF 99-155-5893: RNCC: 3 | RNVC: 2
RIG-564-3130Q: RNCC: 5 | RNVC: 2

14 Dec 2012

5120-99-561-3450
Fi Open Jaw Spanner

995613450
489-31: RNCC: 3 | RNVC: 2
360-860727: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-2707
Box Wrench

994012707
18G 619A/1: RNCC: 3 | RNVC: 2
18G619: RNCC: 5 | RNVC: 2
18G619: RNCC: 5 | RNVC: 2
16C6532: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-724-3455
Torque Wrench

997243455
13013: RNCC: 3 | RNVC: 2
100 1/2 IN.: RNCC: 5 | RNVC: 2

2 Feb 2005

5120-99-532-5037
Lifting Gear Assemb

5120-99-710-6566
Stud Inserter

5120-99-710-6568
Stud Inserter

5120-99-781-1172

5120-99-795-7974

5120-99-108-9863

5120-99-613-1448
Rudder Pi Extractor

996131448
121E93-895-00-00: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-4433
Box Wrench

991204433
DL9A-H6218: RNCC: 2 | RNVC: 9
8REFGP259: RNCC: 5 | RNVC: 1
H6218: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-464-1248
Bull-Whee Extractor

994641248
N390.000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-6217
Open End Wrench

991226217
FV 632859: RNCC: 3 | RNVC: 2
FV 632859: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-100-7458
Socket Head Screw Key

991007458
17103-114: RNCC: 3 | RNVC: 2
E17103-114: RNCC: 5 | RNVC: 2
D/NSC/ES521C/308/11/1/A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-4947
Screw Thread Insert Inserter

997104947
535-4: RNCC: 3 | RNVC: 2
PE8730: RNCC: 5 | RNVC: 2
85-119-19-10-1728: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
9863-4: RNCC: 6 | RNVC: 9
88620-617-292: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-547-9754
Spanner

995479754
DP11184: RNCC: 3 | RNVC: 2
DP11184/DT/001: RNCC: 5 | RNVC: 2
WE128B2: RNCC: 6 | RNVC: 9

10 Nov 1995

5120-99-219-6777
Pliers

992196777
NO PRIMARY REF 99-219-6777: RNCC: 3 | RNVC: 2
536-341: RNCC: 5 | RNVC: 2
536-341: RNCC: 5 | RNVC: 2

19 Jul 2005

5120-99-136-1115
Open End Wrench

991361115
558-2-02390-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-030-1231
Remover Replacer To

990301231
LRT-37-016: RNCC: 3 | RNVC: 2
18G1431-1: RNCC: 5 | RNVC: 2

8 May 1992

5120-99-784-8853
Wooden Stowage Case

997848853
CESNKCS-04-6/1 1.11.1: RNCC: 3 | RNVC: 2

20 Jun 1985

5120-99-374-6959
Spanner Wrench

993746959
1256/90 ITEM 8: RNCC: 3 | RNVC: 2
1256/90: RNCC: 5 | RNVC: 1
1256/90-8: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-805-2691
Open End Wrench

998052691
895 9/16X3/4: RNCC: 3 | RNVC: 2
895: RNCC: 5 | RNVC: 1
CAL7352: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-165-6174
Retaining Ring Installation Tool

991656174
ESK 5249 14: RNCC: 3 | RNVC: 2
209-042326: RNCC: 5 | RNVC: 2

19 Feb 2002

5120-99-201-4488
Spanner Wrench

992014488
021582-00: RNCC: 3 | RNVC: 9
E1-21582: RNCC: 5 | RNVC: 9
W8WHM91-21582: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-347-9172
Socket Head Screw Key

993479172
NO PRIMARY REF 99-347-9172: RNCC: 3 | RNVC: 2
734-949: RNCC: 5 | RNVC: 2
734-949: RNCC: 5 | RNVC: 2

19 Jul 2005

5120-99-902-9383
Drilling Template

999029383
34206-176: RNCC: 3 | RNVC: 2

4 Mar 2011

5120-99-837-9166
Socket Wrench Screwdriver Attachment

998379166
KEN-582-6030K: RNCC: 3 | RNVC: 2
CV197550: RNCC: 5 | RNVC: 2

15 Feb 2013

5120-99-936-3756
Knee Pad

999363756
NO PRIMARY REF 99-936-3756: RNCC: 3 | RNVC: 2
598-002: RNCC: 5 | RNVC: 2

11 May 2011

5120-99-131-3190
Alignment Pin

991313190
HK505-001-8030D: RNCC: 3 | RNVC: 2

13 Mar 2002

5120-99-748-2787
Ele Installing Tool

997482787
T5748-19: RNCC: 3 | RNVC: 2
495955: RNCC: 5 | RNVC: 2

18 Mar 2005

5120-99-607-6488
Runner Nut Assembly

996076488
NO PRIMARY REF 99-607-6488: RNCC: 3 | RNVC: 2
PE35183: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-139-8692
Box Wrench

991398692
277825: RNCC: 3 | RNVC: 2
277-825: RNCC: 5 | RNVC: 2
420-277825: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-542-9850
Flywheel Extractor

995429850
317-00087: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-255-1237
Spanner Wren Handle

5120-99-131-1267
Pliers

991311267
505-CP: RNCC: 3 | RNVC: 2
505-CP: RNCC: 5 | RNVC: 2

2 May 1995

5120-99-910-7889
Hand Rivet Snap

5120-99-910-7922
Hand Rivet Spreader

5120-99-910-6459

5120-99-910-7939
Moulders Trowel

5120-99-910-7943
Moulders Trowels

5120-99-910-7934
Pinion Watchm Stake

5120-99-287-2749
Spanner Wrench

992872749
WG1488-0154-101: RNCC: 3 | RNVC: 2

22 Dec 2012

5120-99-432-5138
Tommy Bar

994325138
NO PRIMARY REF 99-432-5138: RNCC: 3 | RNVC: 2
DWS437-4: RNCC: 5 | RNVC: 2
88621-613-918: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-360-4696
Socket Spann Socket

993604696
4546008-018: RNCC: 3 | RNVC: 2
FK97CB10002: RNCC: 6 | RNVC: 9

17 Sep 1997

5120-99-133-7267
Dummy Nut

991337267
EA2205G011-101: RNCC: 3 | RNVC: 2

28 Jan 2000

5120-99-612-1415
Face Spanner Wrench Socket

996121415
121E-93-717-00.0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-426-3177
Torque Wrench Adapter

994263177
012415: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

17 Jul 2008

5120-99-587-8985
T Piece

995878985
33187J: RNCC: 3 | RNVC: 2

15 Aug 1990

5120-99-526-4501
Screwdriver Bit

995264501
A2969: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-758-9437
Swage

997589437
318080: RNCC: 3 | RNVC: 2
3A/6068: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-766-4939
Special Spanner

997664939
11A4/89976: RNCC: 3 | RNVC: 2
10ZZ206366: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-739-0597
Socket Wrench Handle

997390597
331/33698: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-447-8457
Socket Wr Extension

994478457
00820006: RNCC: 3 | RNVC: 2

4 Aug 2003

5120-99-142-6011

5120-99-170-5068
Wheel Brace

991705068
AT2122: RNCC: 3 | RNVC: 2
FL992A60009: RNCC: 6 | RNVC: 9

16 Nov 1999

5120-99-142-3058
Open End Wrench

991423058
TRA610553: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-659-5781
Spanner Wrench

996595781
1950T407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-733-6719

5120-99-646-9034

5120-99-770-6195
Peening Tool

997706195
CHA729-751: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-301-3847
Bearing Assemb Tool

993013847
312-AT-326: RNCC: 3 | RNVC: 2
V35-0020: RNCC: 5 | RNVC: 2

28 Jun 1995

5120-99-749-7850
Box Wrench

997497850
01T-C-13482: RNCC: 3 | RNVC: 2
01TC13482: RNCC: 5 | RNVC: 2
01T-C-13482: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-833-2481
Spanner Wrench

998332481
G416/4773/4: RNCC: 3 | RNVC: 2

18 Jul 2002

5120-99-419-5123
With Portab Pricker

994195123
CHE2-35: RNCC: 3 | RNVC: 1
0262-2500: RNCC: 6 | RNVC: 9

8 Jul 1981

5120-99-411-8988
Socket Wrench H Bar

994118988
NO PRIMARY REF 99-411-8988: RNCC: 3 | RNVC: 2
ST111-13: RNCC: 5 | RNVC: 9
27Q6032: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-728-5347
Gas Resetting Tool

997285347
MBEU59027: RNCC: 3 | RNVC: 2
B-MBEU59027: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-252-4814
Screwdriver Bit

992524814
49-B-TX-15: RNCC: 3 | RNVC: 2
49-B-TX-15: RNCC: 6 | RNVC: 9
1C/8650: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-768-2446
Open End Wrench

997682446
ST-845: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-541-9440
Specia Ring Spanner

995419440
9002-1357-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-124-2149
Open End Wrench

991242149
6J157167: RNCC: 3 | RNVC: 2
0DW215: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 1: RNCC: 4 | RNVC: 1
BS192-TABLE 3 1-1/16X1-1/8BS: RNCC: 4 | RNVC: 1
TABLE I(F) 1-1/16X1-1/8BS: RNCC: 6 | RNVC: 9
TABLE 3. 1 1/16 BS X 1 1/8 BS: RNCC: 6 | RNVC: 9
TABLE 3. 15/16 W X 1 W: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-705-6434
Torque Tool Adaptor

997056434
NO PRIMARY REF 99-705-6434: RNCC: 3 | RNVC: 2
FD65609: RNCC: 5 | RNVC: 2
C57670T279891: RNCC: 6 | RNVC: 9

25 Jun 2002

5120-99-466-5472
Bod Holder Assembly

994665472
NO PRIMARY REF 99-466-5472: RNCC: 3 | RNVC: 2
558-1-00244: RNCC: 5 | RNVC: 2
1H354: RNCC: 6 | RNVC: 9

18 Jan 1977

5120-99-910-6275
Socket Wrench

999106275
BS2558-TABLE 6 10X11MM: RNCC: 4 | RNVC: 1
A7599: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6749: RNCC: 6 | RNVC: 9
TABLE I(A) 10X11MM: RNCC: 6 | RNVC: 9
BS2558: RNCC: 6 | RNVC: 9
F1FA17302: RNCC: 6 | RNVC: 9
73-2088: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5532
Pliers

999105532
UKC1SPR0V48-H1853: RNCC: 2 | RNVC: 2
DEFSTAN51-10/1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-681-5720
Gas Cylinder Assembly Tool

996815720
HD-70360: RNCC: 3 | RNVC: 2

22 Jul 2005

5120-99-138-3376
Crimping To Locator

991383376
NO PRIMARY REF 99-138-3376: RNCC: 3 | RNVC: 2
600132: RNCC: 5 | RNVC: 9
60E40001: RNCC: 6 | RNVC: 9

31 Jan 1977

5120-99-772-2902
Spanner Wrench

997722902
A1300-154/2: RNCC: 3 | RNVC: 2
1300-154-2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-362-7185
Inspection Mirror

5120-99-735-4703
Ring Nut Spanner

5120-99-530-9134
Spanner Wrench

5120-99-468-7654

5120-99-556-4985

5120-99-539-4775

5120-99-212-1328
Cylind Lifting Tool

992121328
PC24106: RNCC: 3 | RNVC: 2
PC24106: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-657-2508
Drive Pin Punch

996572508
460009324C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-434-7295
Socket Wrench

994347295
BS2558: RNCC: 4 | RNVC: 1
F1FA17169: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-606-9354
Torque Wrench Adapter

996069354
UT.176: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-200-3616
Digging Bar

992003616
RE1582BAR4: RNCC: 3 | RNVC: 1

4 Apr 1991

5120-99-124-2292
Open End Wrench

991242292
310: RNCC: 3 | RNVC: 2
310: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-915-5667

5120-99-404-2127
Extraction Tool

994042127
3984/25765: RNCC: 3 | RNVC: 2
B3984/25765: RNCC: 5 | RNVC: 2

12 Mar 1992

5120-99-145-0806
Mechanical Puller

991450806
NO PRIMARY REF 99-145-0806: RNCC: 3 | RNVC: 2
AM24411: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-745-4560
Actuator Removal To

997454560
8-201-10-075: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-139-2634
Me Fixture Assembly

991392634
3201-85799-01-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-760-6737
Torque Wrench Adapter

997606737
48419-A41/405: RNCC: 3 | RNVC: 2
48419A41-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-466-1662
Colle Assembly Tool

994661662
JTC1726: RNCC: 3 | RNVC: 2
1C6980: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-213-4273
Socket Wrench Socket

992134273
MBEU82242: RNCC: 1 | RNVC: 2
SFS221: RNCC: 3 | RNVC: 2

27 Jan 2010

5120-99-380-6829
Drift

993806829
HU35956: RNCC: 3 | RNVC: 2

4 Jul 2003

5120-99-467-6825
Spanner Wrench

994676825
MT1640: RNCC: 3 | RNVC: 2
27Q25682: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-604-5132
Torque Wrench Adapter

996045132
B300107: RNCC: 3 | RNVC: 2
B300107: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-562-5714
Socket Wrench Socket

995625714
76817: RNCC: 3 | RNVC: 2
H-MM: RNCC: 5 | RNVC: 1

1 May 2003

5120-99-551-4900
Palm-Grip Ratchet Wrench

995514900
NO PRIMARY REF 99-551-4900: RNCC: 3 | RNVC: 2
AA-2592-1711: RNCC: 5 | RNVC: 2
24870: RNCC: 5 | RNVC: 2

20 Apr 2007

5120-99-633-5105
Socket Spanner Atta

996335105
E33-187: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-781-4607
Face Lap

997814607
2877-A15: RNCC: 3 | RNVC: 2
H2877A15: RNCC: 5 | RNVC: 2
85-690-1572: RNCC: 6 | RNVC: 9

1 Apr 1987

5120-99-498-8485
Lever Bar

994988485
NMT-136: RNCC: 3 | RNVC: 2

4 Dec 1998

5120-99-136-1109
Open End Wrench

991361109
558-2-02384-000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-6584
Craftsman's Tweezers

999106584
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H20334: RNCC: 5 | RNVC: 2
640-4-14108: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2928: RNCC: 6 | RNVC: 9
H2928: RNCC: 6 | RNVC: 9
F1FA1950: RNCC: 6 | RNVC: 9
1C6951: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-8995
Extractor

994118995
NO PRIMARY REF 99-411-8995: RNCC: 3 | RNVC: 2
ST1959: RNCC: 5 | RNVC: 9
27Q13588: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-607-5511
Mechanical Puller

996075511
NO PRIMARY REF 99-607-5511: RNCC: 3 | RNVC: 2
PE27387: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-820-0283
Socket Wrench Socket

998200283
NO PRIMARY REF 99-820-0283: RNCC: 3 | RNVC: 2
KEN-582-7110K: RNCC: 5 | RNVC: 2
KEN-582-7110K: RNCC: 6 | RNVC: 9

5 Sep 2011

5120-99-742-9260
Seal Assembly Tool

997429260
3190T000-001: RNCC: 3 | RNVC: 2

29 Jul 2003

5120-99-120-4445
Box Wrench

991204445
DL9A-H6230: RNCC: 2 | RNVC: 9
7REFGP259: RNCC: 5 | RNVC: 1
H6230: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-554-2578
Spanner Wrench

995542578
B5283-66-2: RNCC: 3 | RNVC: 2
B5283-661TEM2: RNCC: 5 | RNVC: 2
H606-986700: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-448-4271
Bush Assembly Tool

994484271
NO PRIMARY REF 99-448-4271: RNCC: 3 | RNVC: 2
UL13319: RNCC: 5 | RNVC: 2
88633-616-750: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-7804
Mandrel

999107804
NO PRIMARY REF 99-910-7804: RNCC: 3 | RNVC: 2
4130 893 7800: RNCC: 5 | RNVC: 2
FL000Y50062: RNCC: 6 | RNVC: 9

16 Aug 2000

5120-99-212-4653
Staking Punch Tool

992124653
AEL1003/02: RNCC: 3 | RNVC: 2

28 Aug 2002

5120-99-751-3155
Socket Head Screw Key Set

997513155
H01-1528: RNCC: 3 | RNVC: 2
MILLS H01-1528: RNCC: 5 | RNVC: 2

18 Mar 2010

5120-99-599-0935
Hand Hydraulic Jack

995990935
NO PRIMARY REF 99-599-0935: RNCC: 3 | RNVC: 2
D4895C: RNCC: 5 | RNVC: 2
D4895C: RNCC: 5 | RNVC: 9

27 Jan 2010

5120-99-212-8496
Cca Extraction Tool

992128496
202-036703: RNCC: 3 | RNVC: 2
202-036703: RNCC: 5 | RNVC: 2

20 Sep 2005

5120-99-169-5780
Rnca

991695780
NO PRIMARY REF 99-169-5780: RNCC: 3 | RNVC: 2
NAVY RECON QUERY 1874: RNCC: 5 | RNVC: 2

28 Mar 1992

5120-99-465-6046
Spanner

5120-99-847-6790

5120-99-636-8389
Crimp Tool

5120-99-712-0682

5120-99-763-5642
Speci Torque Wrench

5120-99-760-7153

5120-99-411-9004
Socket Wrench H Bar

994119004
NO PRIMARY REF 99-411-9004: RNCC: 3 | RNVC: 2
ST111-9: RNCC: 5 | RNVC: 9
27Q13581: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-980-9008
Socket Wrench Spanner Attachment

999809008
533-AT-007: RNCC: 3 | RNVC: 2

23 Feb 2009

5120-99-460-6511
Pin Spanner

994606511
NO PRIMARY REF 99-460-6511: RNCC: 3 | RNVC: 2
CD10267: RNCC: 5 | RNVC: 2
0671-5058: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-4669
Torque Wrench Adapter

996594669
P-891079-408: RNCC: 3 | RNVC: 2
P891079-408: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-9337
Bearing Puller Beam

991389337
NO PRIMARY REF 99-138-9337: RNCC: 3 | RNVC: 2
1243-2: RNCC: 5 | RNVC: 2
932B: RNCC: 6 | RNVC: 9

30 Nov 1977

5120-99-120-0927
Pipe Wrench

991200927
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
210/2: RNCC: 5 | RNVC: 2
644617: RNCC: 5 | RNVC: 2
H3015: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H3015: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-580-5251
Screw Thread Insert Tang Breakoff Tool

995805251
BATB2: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9
88620-617-297: RNCC: 6 | RNVC: 9
1C6985: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-376-2495
Socket Wrench Socket

993762495
HT 494001V: RNCC: 3 | RNVC: 2

11 May 1993

5120-99-124-0416
Torque Wrench

991240416
WB808-4BA: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 32: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
H6333: RNCC: 6 | RNVC: 9
0276-276057: RNCC: 6 | RNVC: 9
1H185: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-180-3364
Flat Tip Screwdriver

991803364
NMT-117: RNCC: 3 | RNVC: 2

3 Dec 1998

5120-99-974-7245
Open End Wrench

999747245
825/00114: RNCC: 3 | RNVC: 2
FL9631P0008: RNCC: 6 | RNVC: 9

13 Feb 1996

5120-99-135-1661

5120-99-545-6978

5120-99-105-7720

5120-99-545-3358
Open End Wrench

5120-99-124-0710

5120-99-577-3638

5120-99-105-0195
Torque Wrench

5120-99-775-2147

5120-99-714-4728

5120-99-923-8163
Screwdriver Bit

999238163
MSD206: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
0277-12619: RNCC: 6 | RNVC: 9
0277-923-8163: RNCC: 6 | RNVC: 9
A1UBA,1USS5: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-661-8201
Torque Wrench

996618201
T0854/12E: RNCC: 3 | RNVC: 1
640/1/29500: RNCC: 5 | RNVC: 2
PT6036-3-610290: RNCC: 7 | RNVC: 2

25 Apr 1991

5120-99-713-6608
Starter D Drift Pad

997136608
NO PRIMARY REF 99-713-6608: RNCC: 3 | RNVC: 2
PE8362: RNCC: 5 | RNVC: 9

25 Jul 1979

5120-99-442-3579
Socket Wrench Extension

994423579
100401-4065-ASY: RNCC: 3 | RNVC: 2
100401: RNCC: 5 | RNVC: 1
100401-4065: RNCC: 5 | RNVC: 1
M508257: RNCC: 5 | RNVC: 2
UW231B1: RNCC: 6 | RNVC: 9

29 Apr 1993

5120-99-130-1871
Gasoline Blo Nipple

991301871
NO PRIMARY REF 99-130-1871: RNCC: 3 | RNVC: 2
90241: RNCC: 5 | RNVC: 2
2515: RNCC: 5 | RNVC: 2
90241: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-479-5382
Socket Wrench Crowfoot Attachment

994795382
ACJ375: RNCC: 3 | RNVC: 2
ACC-A3: RNCC: 5 | RNVC: 1
MCP24B: RNCC: 6 | RNVC: 9

12 Nov 1999

5120-99-556-8268
Socket Wrench

995568268
C1696: RNCC: 3 | RNVC: 2
A7270-8: RNCC: 5 | RNVC: 2
A7270PT8: RNCC: 5 | RNVC: 2
190-152404: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-205-0206
Magneto To E Driver

992050206
NO PRIMARY REF 99-205-0206: RNCC: 3 | RNVC: 2
470694: RNCC: 5 | RNVC: 2
470694: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-779-8848
Pump Mounti Bracket

5120-99-806-3926
Assembly Post

5120-99-826-4030

5120-99-826-0295
Specia Ring Spanner

5120-99-829-5808
Camshaft Bu Adaptor

5120-99-827-3117

5120-99-828-0416

5120-99-828-5625

5120-99-747-6958
Service And Repair

5120-99-823-2701
Hydraulic Ja Handle

5120-99-723-1082

5120-99-757-8110

5120-99-284-3045
Torque Screwdriver

992843045
AITG-5287: RNCC: 3 | RNVC: 2

21 Mar 2005

5120-99-130-0118
Mirror Attatchment

991300118
NO PRIMARY REF 99-130-0118: RNCC: 3 | RNVC: 2
4PLAN0M1RR0R: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-152-3304
Pin

5120-99-446-7282
Peg Spanner

994467282
NO PRIMARY REF 99-446-7282: RNCC: 3 | RNVC: 2
UL8937: RNCC: 5 | RNVC: 2
88634-617-107: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-763-8780
Mechanical Puller

997638780
T10012-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-766-4941
Special Socket

997664941
CHA 1017-172: RNCC: 3 | RNVC: 2
10ZZ206388: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-851-7290
Unwrapping Tool

998517290
NO PRIMARY REF 99-851-7290: RNCC: 3 | RNVC: 2
543-765: RNCC: 5 | RNVC: 2

18 Sep 2001

5120-99-770-6197
Mechanical Puller

997706197
CHA729-1192: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-763-3869
Plate Assembly

997633869
EA6405G513-043: RNCC: 3 | RNVC: 2

24 Oct 2008

5120-99-782-1160
Tool

997821160
5693-299: RNCC: 3 | RNVC: 2
H22676: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-124-0993
Cont Insertion Tool

991240993
11-7401-16: RNCC: 3 | RNVC: 2
H20607: RNCC: 5 | RNVC: 2
1H606: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-252-7431
Injector Extractor

992527431
GA.5909: RNCC: 3 | RNVC: 2
21826015: RNCC: 5 | RNVC: 2
GA5100-12: RNCC: 5 | RNVC: 2
GA5100-12: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-445-9257
Turn Key Spanner

5120-99-794-4228
Screwdriver Bit

997944228
NO PRIMARY REF 99-794-4228: RNCC: 3 | RNVC: 2
440-1-ACR: RNCC: 5 | RNVC: 2
440-1-ACR-R: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-1251
Torque Wrench

991201251
DEFSTAN51-11 PART 32: RNCC: 4 | RNVC: 1
AE2106: RNCC: 5 | RNVC: 2
H20260: RNCC: 5 | RNVC: 2
ACRATORMODELA: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H5743: RNCC: 6 | RNVC: 9
TABLE I(B): RNCC: 6 | RNVC: 9
1L202: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-495-8836
Spanner Wrench

994958836
123642ST: RNCC: 3 | RNVC: 2
BP27716: RNCC: 5 | RNVC: 2
BP27716-1: RNCC: 5 | RNVC: 2

16 Aug 1991

5120-99-655-4456
Open End Wrench

996554456
A4RLSKA95000-157-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-149-2353
Spanner Wrench

991492353
DR3180-0033-DT: RNCC: 3 | RNVC: 2

16 Apr 1993

5120-99-719-7611
Wrench Spanner

997197611
4819: RNCC: 3 | RNVC: 9
6CT13: RNCC: 6 | RNVC: 9
9ST2: RNCC: 6 | RNVC: 9
SCT13: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-1896
Mechanical Puller

991361896
418157: RNCC: 3 | RNVC: 2
70112: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-836-1371
Valve Spri Adaptor

998361371
PD6118-4: RNCC: 3 | RNVC: 2
PD61184: RNCC: 5 | RNVC: 2
LE463B1: RNCC: 6 | RNVC: 9
LE462D3: RNCC: 6 | RNVC: 9
E038-939328: RNCC: 6 | RNVC: 9
H338-939328: RNCC: 6 | RNVC: 9
E038-939328: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-146-2900
S Installation Tool

991462900
S6170-35084-4: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-665-9877
Box Wrench

996659877
S3S20302000: RNCC: 3 | RNVC: 2
HU24703: RNCC: 5 | RNVC: 2

11 Jul 2003

5120-99-928-8003
Braide Cutting Wire

999288003
892/00849: RNCC: 3 | RNVC: 2

18 Mar 2008

5120-99-273-7792
Insert Tool Kit

992737792
A1137001: RNCC: 3 | RNVC: 2
071TK55-1979-O053: RNCC: 5 | RNVC: 2

31 Mar 2001

5120-99-537-6932
Setting Mandrel

995376932
NO PRIMARY REF 99-537-6932: RNCC: 3 | RNVC: 2
3002837: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-835-2128
Allen Setscr Wrench

998352128
BR90/19-30-70-1006: RNCC: 3 | RNVC: 2
031SJ-018: RNCC: 6 | RNVC: 9

15 May 2003

5120-99-910-7899
Hand Rivet Set

999107899
XMISC/844: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 6 | RNVC: 9
DL9-H2400: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-870-0579
Face Spanner Wrench Socket

998700579
HY271425: RNCC: 3 | RNVC: 2
100A504418: RNCC: 5 | RNVC: 2
A504418: RNCC: 5 | RNVC: 2
TA1210/003: RNCC: 6 | RNVC: 9

6 Aug 1998

5120-99-717-3391
Bearing And Bushing Driver Plug

997173391
WD4188-00840-101: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-766-4942
Special Socket

997664942
CH 1017-171: RNCC: 3 | RNVC: 2
10ZZ206389: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-6864
Head

998106864
NO PRIMARY REF 99-810-6864: RNCC: 3 | RNVC: 2
7F5283: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-241-5782
Mechanical Puller

992415782
LT-16554: RNCC: 3 | RNVC: 2
V/61/A6531/24/122/1026/2/029: RNCC: 5 | RNVC: 2

13 Jan 2001

5120-99-772-0039
Combination Box And Open End Wrench

997720039
B50288-1: RNCC: 3 | RNVC: 2
B50288: RNCC: 5 | RNVC: 2
B50288-1: RNCC: 5 | RNVC: 2
B50288: RNCC: 5 | RNVC: 2
WE128B1: RNCC: 6 | RNVC: 9
0XI11B: RNCC: 6 | RNVC: 9

6 Apr 1999

5120-99-853-3498
Chai Connection Aid

998533498
FV3026151: RNCC: 3 | RNVC: 2
BR90-46-60-00-0055: RNCC: 5 | RNVC: 2

25 Apr 1995

5120-99-647-9993

5120-99-139-6497

5120-99-136-2783
Combination Box And Open Endbox Wrench

5120-99-888-3589
F Mandrel Oil Seal

998883589
17219236-0: RNCC: 3 | RNVC: 2
17219236-0: RNCC: 5 | RNVC: 2
021JB-011: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-120-4425
Adjustable Wrench

991204425
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
3AB19671: RNCC: 5 | RNVC: 2
ACW210: RNCC: 5 | RNVC: 2
H6151: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-4668
Open End Box Wrench

994224668
N43890-1: RNCC: 3 | RNVC: 2
88604-606-097: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-4139
Socket Wrench Socket

991244139
PHH1312: RNCC: 3 | RNVC: 2
954-1209: RNCC: 5 | RNVC: 2
7142: RNCC: 5 | RNVC: 2
1L618: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-448-9036
Extractor

5120-99-448-0280

5120-99-219-2974
Face Wrench Socket

5120-99-221-1885
Special Spanner

5120-99-130-1885

5120-99-432-9153

5120-99-432-0348

5120-99-840-2066
Drill Guide

998402066
EA6705G568-041: RNCC: 3 | RNVC: 2

26 Nov 1999

5120-99-844-8020
Offset Screwdriver

998448020
NO PRIMARY REF 99-844-8020: RNCC: 3 | RNVC: 2
663-875: RNCC: 5 | RNVC: 2
020TF-014: RNCC: 6 | RNVC: 9

12 Mar 2002

5120-99-460-3930
Extractor

994603930
NO PRIMARY REF 99-460-3930: RNCC: 3 | RNVC: 2
T86588: RNCC: 5 | RNVC: 2
64DE137: RNCC: 6 | RNVC: 9
64DE137: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-902-4182
Calibratio Ring Nut

999024182
EA6405G521-101: RNCC: 3 | RNVC: 2
1MEVGUL: RNCC: 6 | RNVC: 9

28 Jul 2004

5120-99-659-6975
Mechanical Puller

996596975
48645A4-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-950-6968
Open End Wrench

999506968
0DW2113: RNCC: 3 | RNVC: 2
6J120139: RNCC: 5 | RNVC: 2
A55032-582: RNCC: 5 | RNVC: 2
DEF STAN 51-11 PART 28: RNCC: 6 | RNVC: 9
BS192-TABLE 3. 3/4 BS X 15/16 BS: RNCC: 6 | RNVC: 9
BS192-TABLE 3. 11/16 W X 13/16 W: RNCC: 6 | RNVC: 9
F1FA17238: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-111-3128
Spanner Wrench

991113128
AB/5/8/10000: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-236-1529
Socket Wrenc Socket

992361529
406287: RNCC: 3 | RNVC: 2
FL000ED0028: RNCC: 6 | RNVC: 9

20 Mar 2000

5120-99-606-7658
Holder Unit

996067658
PE3766: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-500-3983
Socket Wrench Spanner Attachment

995003983
ST200042: RNCC: 3 | RNVC: 2
FO965080006: RNCC: 6 | RNVC: 9

5 Jan 1996

5120-99-126-4788
Drill Guide

991264788
43052S: RNCC: 3 | RNVC: 2

23 May 1997

5120-99-659-6746
Socket Wrench Handle

996596746
48415-A59/407: RNCC: 3 | RNVC: 2
48415A59-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-659-6904
Spanner Wrench

996596904
558-2-03458C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-836-3749
Cross Tip Screwdriver

998363749
111114/022: RNCC: 3 | RNVC: 2
GM-U-121601/6: RNCC: 5 | RNVC: 2
FK9706W0101: RNCC: 6 | RNVC: 9

4 Feb 1998

5120-99-733-5854
Socket Wrench Handle Bar

997335854
ME02042/358/24H17: RNCC: 3 | RNVC: 2
ME02042-358-24H17: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-546-2025
Open End Box Wrench

5120-99-605-2947
Socket Wrench Crowfoot Attachment

996052947
A84870: RNCC: 3 | RNVC: 2
84870: RNCC: 5 | RNVC: 1
558/7/09145/008: RNCC: 5 | RNVC: 2

20 Sep 1991

5120-99-562-8382
Drift

995628382
7236-21428: RNCC: 3 | RNVC: 2
7236-21428-40-1: RNCC: 5 | RNVC: 2
5040764: RNCC: 5 | RNVC: 2
7236-21428-40: RNCC: 5 | RNVC: 2
AST10187: RNCC: 5 | RNVC: 2

5 May 2011

5120-99-869-3610
Nut Spinner Blade

998693610
5490-06-SOCKET 8MM: RNCC: 3 | RNVC: 2

22 Aug 1995

5120-99-120-4765
Flat Tip Screwdriver

991204765
NO PRIMARY REF 99-120-4765: RNCC: 3 | RNVC: 2
65452: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-619-5780
Spanner

996195780
UT889: RNCC: 3 | RNVC: 2
C26-66: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-5559
Box Wrench

991205559
DDW206: RNCC: 3 | RNVC: 2
BS3555-TABLE 3 7/16X1/2BS: RNCC: 4 | RNVC: 1
6RB7182: RNCC: 6 | RNVC: 9
BS3555: RNCC: 6 | RNVC: 9
F1FA17212: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-4456
Socket Wrench

991204456
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
Z1: RNCC: 5 | RNVC: 2
H6140: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-401-3870
Exhaus Fitting Tool

994013870
NO PRIMARY REF 99-401-3870: RNCC: 3 | RNVC: 2
262753: RNCC: 5 | RNVC: 2
16C5467: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-138-5125
Swaging Tool Ha Die

991385125
NO PRIMARY REF 99-138-5125: RNCC: 3 | RNVC: 2
3002198: RNCC: 5 | RNVC: 2

27 Mar 1979

5120-99-388-5798
Socket Wrench Set

993885798
264-2274: RNCC: 3 | RNVC: 2
264-2274: RNCC: 5 | RNVC: 2

22 Mar 2000

5120-99-791-7158
Open End Wrench

997917158
NMT-267: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-99-139-1041
Screw Thread Insert Tang Breakoff Tool

991391041
DEFSTAN51-17-1D: RNCC: 2 | RNVC: 2
MTB112: RNCC: 3 | RNVC: 2
DEFSTAN51-17: RNCC: 5 | RNVC: 2
1D: RNCC: 6 | RNVC: 9
75A80052: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-670-4536
Lapping Tool Assort

996704536
LSS2/CHK/GSS/248: RNCC: 3 | RNVC: 2
CSDE/CHK/GSS/248: RNCC: 5 | RNVC: 2

22 Mar 1996

5120-99-779-8946
Jaws

997798946
7162-3007: RNCC: 3 | RNVC: 2

19 Jan 1993

5120-99-782-1159
Plug Punch

997821159
5693-298: RNCC: 3 | RNVC: 2
H22675: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-815-7812
Wheel Brace

998157812
NO PRIMARY REF 99-815-7812: RNCC: 3 | RNVC: 2
FV58330: RNCC: 5 | RNVC: 2
LV9ASCFV58330: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-830-7977
Spanner Attachment

998307977
V3626-30: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-136-1894
Spanner Wrench

991361894
17737: RNCC: 3 | RNVC: 2
32216: RNCC: 5 | RNVC: 2
H106-202364: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-629-5354
Hand Screw Jack

996295354
WG0183-0052-047: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-416-3031
Bearing And Bushing Inserter

994163031
EA1-88-383: RNCC: 3 | RNVC: 2
26FZ-95052: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-533-1550
Socket Locking Tool

995331550
36833-102: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-616-7038
Socket Wrench

996167038
3000-9500-014: RNCC: 3 | RNVC: 2
3000-9500-014/001: RNCC: 5 | RNVC: 2
1580L011: RNCC: 5 | RNVC: 2
3000-9500-014 SHEET 001: RNCC: 5 | RNVC: 2

24 May 1991

5120-99-712-9123
Spanner Wrench

5120-99-776-3512
Box Wrench

5120-99-402-0028
Bicycl Screwdrivers

5120-99-710-6959
Socket Wrenc Socket

5120-99-964-8558
Inserting Tool

999648558
PA577-316: RNCC: 3 | RNVC: 2
362357: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-723-4069
Bearing And Bushing Remover

997234069
WG1388-3306-041: RNCC: 3 | RNVC: 2
XP98PA01489: RNCC: 6 | RNVC: 9

23 Jan 1998

5120-99-629-8047
Mandrel

996298047
J600/1/832 MANDREL: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-629-8450
Crimp Tool

996298450
558-1-03480: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-5126
Socket Wrench Adapter

991225126
A2: RNCC: 3 | RNVC: 2
1225126: RNCC: 3 | RNVC: 2
T2EA1518: RNCC: 5 | RNVC: 2
1700043: RNCC: 5 | RNVC: 2
KFA2: RNCC: 6 | RNVC: 9
1L516: RNCC: 6 | RNVC: 9
A2 LOCK-ON: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-171-8777
Liner Remover T Leg

991718777
00832/DT/035918: RNCC: 3 | RNVC: 2
00832/AS/035915 ITEM 3: RNCC: 5 | RNVC: 2
00832/AS/035915/3: RNCC: 5 | RNVC: 2

26 Aug 2000

5120-99-723-3718
Belt Checking Tool

997233718
625/1/06685/000: RNCC: 3 | RNVC: 2
625/GA/06685/000: RNCC: 5 | RNVC: 2

21 Aug 2001

5120-99-244-5108
Drift

992445108
TC16/6/86/221: RNCC: 3 | RNVC: 2
NATEC/TC16/6/86: RNCC: 5 | RNVC: 1
TC16/6/86: RNCC: 5 | RNVC: 1
NATEC/TC16/6/86/221: RNCC: 5 | RNVC: 2

14 Feb 1992

5120-99-276-1617
Seal Inserter

992761617
00832/WA/035930: RNCC: 3 | RNVC: 2
00832/GA/035933 ITEM 8: RNCC: 5 | RNVC: 2
00832/GA/035933/8: RNCC: 5 | RNVC: 2

24 Aug 2000

5120-99-522-1506
Socket Wrench

995221506
D21583: RNCC: 3 | RNVC: 2
10AG1533: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-253-5526
Combination Tool

992535526
37580: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-639-0807
Spanner Wrench

996390807
BLD2596: RNCC: 3 | RNVC: 2
BLD2596: RNCC: 5 | RNVC: 9
BLD259611NST: RNCC: 5 | RNVC: 9
BLD259611NST: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-700-8906
Socket Wrench Socket

997008906
NM60A: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-751-0833

5120-99-122-7570
Soldering Tweezers

991227570
BP1-116: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-763-8785
Drive Pin Punch

997638785
T10016-407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-794-4219
Screwdriver Bit

997944219
TW-11: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-799-5924
Spanner Wrench

997995924
200887001-AFT-23: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-781-4599
Conn Piec Extractor

997814599
2877A6: RNCC: 3 | RNVC: 2
H2877A6: RNCC: 5 | RNVC: 2
85-690-1574: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-467-7869
Drift

994677869
R526B: RNCC: 3 | RNVC: 2
26FX95099: RNCC: 6 | RNVC: 9

7 Nov 1979

5120-99-659-6284
Centring Fork

996596284
T4400B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-782-9637
Spanner Wrench

5120-99-765-4214
Spanner Wrench

5120-99-782-5945

5120-99-138-5657

5120-99-520-2970
Testing Lever

995202970
NO PRIMARY REF 99-520-2970: RNCC: 3 | RNVC: 2
85-25-19-10-1038: RNCC: 5 | RNVC: 2

31 Jan 1977

5120-99-129-7106
Hand Shovel

991297106
NO PRIMARY REF 99-129-7106: RNCC: 3 | RNVC: 2
EANDS4662: RNCC: 5 | RNVC: 2
KF4625: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-114-4809
Hand Turnin Adaptor

991144809
NO PRIMARY REF 99-114-4809: RNCC: 3 | RNVC: 2
C26-54: RNCC: 5 | RNVC: 2
UT649: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-137-9423
Screwdriver Bit

991379423
TWD1-7B: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
TWA7: RNCC: 5 | RNVC: 1
TW7B4D: RNCC: 5 | RNVC: 1
47K80004: RNCC: 6 | RNVC: 9
TWA-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-574-4720
Craftsman's Tweezers

995744720
TL-502-411: RNCC: 3 | RNVC: 2

28 Nov 2007

5120-99-120-7305
Inserted Hammer Face

991207305
75/620/CF: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 31: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
H6003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-422-4231
Mechanical Puller Forcing Screw

994224231
EA6205G556-103: RNCC: 3 | RNVC: 2

21 May 2008

5120-99-614-1641
Mechanical Puller

996141641
WG0188-5464-043: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-542-9849
Crankshaf Extractor

995429849
317-81: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-823-6920
Extension Tube

998236920
FV714339: RNCC: 3 | RNVC: 2

1 Mar 1977

5120-99-829-5467
Fuel In Timing Tool

998295467
MS67B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-812-4668
Blow-By Tool

998124668
3822476: RNCC: 3 | RNVC: 2
FH9804S0003: RNCC: 6 | RNVC: 9

14 Jul 1998

5120-99-828-2505
Open End Wrench

998282505
FV 871754: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-6606
Pin Vice

999106606
H2971: RNCC: 2 | RNVC: 2
124: RNCC: 5 | RNVC: 2
H2971: RNCC: 5 | RNVC: 2
F1FA19538: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-830-8060
Sleeve Clut Adaptor

998308060
1X56 137 103: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-828-5621
Fina Wrench Spanner

998285621
DB909842: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-735-2421

5120-99-136-9515

5120-99-655-1102
Spanner Wrench

996551102
460009311C: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-138-6553
Flat Tip Screwdriver

991386553
04938.0: RNCC: 3 | RNVC: 2
T2FA1693: RNCC: 5 | RNVC: 2
2871-0: RNCC: 5 | RNVC: 2
SD1 04938.0: RNCC: 5 | RNVC: 2
BDE2515: RNCC: 5 | RNVC: 2
66-246: RNCC: 5 | RNVC: 2
682A0001: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-657-1744
Mechanical Puller

996571744
GE1062-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-466-8530
Leader Pin

994668530
558-2-00086: RNCC: 3 | RNVC: 2
558-8-00086: RNCC: 5 | RNVC: 2
1H325: RNCC: 6 | RNVC: 9

18 Jan 1977

5120-99-411-0099
Anvil

994110099
J600/2/6M ANVIL: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-651-6081
Mechanical Puller

996516081
PE58486: RNCC: 3 | RNVC: 2
PE58486: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-137-5713

5120-99-137-9654

5120-99-137-5667

5120-99-111-4810
Socket Wren Adapter

5120-99-629-6245
Insert Recessing To

996296245
NO PRIMARY REF 99-629-6245: RNCC: 3 | RNVC: 2
ADNLYNXGSE33: RNCC: 5 | RNVC: 2
GSE33: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-465-3630
Friction Pad

994653630
NO PRIMARY REF 99-465-3630: RNCC: 3 | RNVC: 2
1B5664: RNCC: 5 | RNVC: 2

17 Jul 1978

5120-99-525-7027
Hand Screw Jack

5120-99-727-3593
Palm-Grip Ratchet Wrench

997273593
THD7 REV A/F SQUARE 1.125 IN: RNCC: 3 | RNVC: 2
THD7 REV: RNCC: 5 | RNVC: 1

10 Aug 2012

5120-99-422-4654
Socket Wrench

994224654
N38432-7: RNCC: 3 | RNVC: 2
88604-606-083: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-4584
Socket Wrench

994234584
9028-666: RNCC: 3 | RNVC: 2
558392: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-763-8792
Torque Wrench Adapter

997638792
T7081-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-862-3184
Socket Wrench Crowfoot Attachment

998623184
7148-20003-20-3: RNCC: 3 | RNVC: 2
FH410-4000-010N: RNCC: 5 | RNVC: 2

2 May 1995

5120-99-127-6438
Hand Blind Riveter

991276438
7181-0006: RNCC: 3 | RNVC: 2
7181-0006: RNCC: 5 | RNVC: 2
AHJ0P190: RNCC: 5 | RNVC: 2
7181-0006: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-479-5264
Socket Wrench

994795264
P-894835-401: RNCC: 3 | RNVC: 2
P894835-401: RNCC: 5 | RNVC: 2
XP98PK02098: RNCC: 6 | RNVC: 9

14 Jan 1999

5120-99-910-7842
Hand Rivet Set Up

999107842
DEF1221: RNCC: 4 | RNVC: 1
H2386: RNCC: 5 | RNVC: 2
H2386: RNCC: 6 | RNVC: 9
1C5408: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-908-2379
Torque Wrench Adapter

999082379
012055: RNCC: 3 | RNVC: 2
91903644: RNCC: 5 | RNVC: 2

3 May 2011

5120-99-910-6616
Revolving Head Vice

999106616
H2983: RNCC: 3 | RNVC: 2
F1FA19561: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-8249

5120-99-957-9156
Wrench

999579156
OEW25M: RNCC: 3 | RNVC: 2
0307X0093: RNCC: 6 | RNVC: 9
030EH-025: RNCC: 6 | RNVC: 9

23 Jan 2003

5120-99-223-1039
Hand Hydraulic Jack

992231039
SAD-2150: RNCC: 3 | RNVC: 2
SL.B.2161: RNCC: 5 | RNVC: 2
SSL3-10-22: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-552-9298
Box Wrench

995529298
C.6560 ITEM 1: RNCC: 3 | RNVC: 2
C.6560-1: RNCC: 5 | RNVC: 2
469-291815: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-901-9510
Lamp Extractor

999019510
219P05: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-789-4274
Fan Support Bracket

997894274
5P1762: RNCC: 3 | RNVC: 2
5P1762: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-784-4897
Service Tool

997844897
S103: RNCC: 3 | RNVC: 2

10 Nov 2003

5120-99-828-8964
Straight Adaptor

5120-99-794-5424
Torque Wrench

5120-99-523-1784

Load More Results