What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 14 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 14 of 108

5120-99-560-0818
Tool

995600818
NO PRIMARY REF 99-560-0818: RNCC: 3 | RNVC: 2
110 150: RNCC: 5 | RNVC: 2
982S40017: RNCC: 6 | RNVC: 9

26 Jan 1999

5120-99-910-6267
Open End Wrench

999106267
BS192-1-1/2BS: RNCC: 3 | RNVC: 1
C00RDPATH5314: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 1: RNCC: 4 | RNVC: 1
BS192: RNCC: 6 | RNVC: 9
TABLE I(B) 1-1/2BS: RNCC: 6 | RNVC: 9
1954: RNCC: 6 | RNVC: 9
TABLE 3: RNCC: 6 | RNVC: 9
F1FA17247: RNCC: 6 | RNVC: 9
OSW222: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-700-1439
Rawhide Mallet

997001439
NO PRIMARY REF 99-700-1439: RNCC: 3 | RNVC: 2
2 1-2LB: RNCC: 5 | RNVC: 9

19 Oct 1989

5120-99-784-5562
Open Jaw Spanner

997845562
NO PRIMARY REF 99-784-5562: RNCC: 3 | RNVC: 2
50MM: RNCC: 5 | RNVC: 2
56-6/3-003: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-782-4417
Oil Seal Crankshaft

997824417
GA5161: RNCC: 3 | RNVC: 2
GA5161/A: RNCC: 5 | RNVC: 2
VT18460: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-833-8450
Tool

998338450
STD419D5-Y: RNCC: 3 | RNVC: 2
26TD-95068: RNCC: 6 | RNVC: 9

25 Jun 2002

5120-99-456-2062
Screw Extractor

994562062
F1FA13182: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1
F1FA13182: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-514-4427
Screwdriver Bit Holder

995144427
TL-502-886: RNCC: 3 | RNVC: 2
TL-502-886: RNCC: 3 | RNVC: 9

29 Oct 2008

5120-99-144-6070
Reservoir Unit Hook

991446070
460002164: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-826-8091

5120-99-948-7622

5120-99-710-7975

5120-99-152-5124
Punch

991525124
2130: RNCC: 3 | RNVC: 2
E4/2130: RNCC: 5 | RNVC: 2

6 Mar 1996

5120-99-500-9119
Centering Tool

995009119
016-01-05M1: RNCC: 3 | RNVC: 2
002FZ0023: RNCC: 6 | RNVC: 9

28 Nov 2000

5120-99-361-3093
Seal Inserter

993613093
N919JE179: RNCC: 3 | RNVC: 2
N919/179: RNCC: 5 | RNVC: 2

2 Sep 2010

5120-99-399-0814
Socket Head Screw Key

993990814
B50096-1: RNCC: 3 | RNVC: 2
B50096: RNCC: 5 | RNVC: 2
B50096-1: RNCC: 5 | RNVC: 2
B50096: RNCC: 5 | RNVC: 2
68005: RNCC: 6 | RNVC: 9
WE128B1: RNCC: 6 | RNVC: 9

7 Apr 1999

5120-99-153-9651
Hydraulic Jack Handle

991539651
1112-10063: RNCC: 3 | RNVC: 2
CV201758: RNCC: 5 | RNVC: 2

19 Dec 2013

5120-99-319-0715
Engine Valve Seat Insert Replacing Tool

993190715
NO PRIMARY REF 99-319-0715: RNCC: 3 | RNVC: 2
94270: RNCC: 5 | RNVC: 2
94270: RNCC: 5 | RNVC: 9

28 Jan 2010

5120-99-740-1016
Mechanical Puller

997401016
01TC14206: RNCC: 3 | RNVC: 2
01TC14206: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-731-8896
Flat Tip Screwdriver

997318896
T2FA1396: RNCC: 3 | RNVC: 2

9 Mar 1990

5120-99-731-2155
Dowe Insertion Tool

997312155
FV2077330: RNCC: 3 | RNVC: 2
AT60029: RNCC: 5 | RNVC: 2

7 Apr 1986

5120-99-624-9523
Combination Box And Open End Wrench

996249523
077417: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-996-9172
Spanner Wrench

999969172
MBEU169334: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-99-825-5481
Stage Lifting Clamp

998255481
NO PRIMARY REF 99-825-5481: RNCC: 3 | RNVC: 2
V1380-6: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-724-2340
Socket Head Screw Key

997242340
601-6120K: RNCC: 3 | RNVC: 2
032J4-007: RNCC: 6 | RNVC: 9

7 Jul 2003

5120-99-700-1429

5120-99-120-2752
Open End Box Wrench

991202752
DL-9-A: RNCC: 4 | RNVC: 1
H5811: RNCC: 6 | RNVC: 9
1C7158: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-5120
Socket Wrench Adapter

991225120
KMA3: RNCC: 3 | RNVC: 2
BS4006: RNCC: 4 | RNVC: 1
TABLE 35 10.00MM X 6.30MM FORM B: RNCC: 6 | RNVC: 9
1L515: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-803-0251
Clamp Plates With B

5120-99-745-9348
Peening Tool

997459348
T8743-407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-437-1524
Special Spanner

994371524
NO PRIMARY REF 99-437-1524: RNCC: 3 | RNVC: 2
1L91-23232: RNCC: 5 | RNVC: 9
88306-302-100: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-806-8602
Inject Needle Probe

998068602
7244-6C: RNCC: 3 | RNVC: 2
7244-6C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-660-9418
Spanner

996609418
MBEU-64344-407: RNCC: 3 | RNVC: 2
B/MBEU-64344-407: RNCC: 5 | RNVC: 2
MBEU64344-407: RNCC: 5 | RNVC: 2
TORNADO-9060: RNCC: 6 | RNVC: 9

28 Sep 1994

5120-99-341-5146

5120-99-332-1045
Torque Wren Adapter

5120-99-257-9903
Ratchet Wrench

5120-99-800-4414
Mechanical Puller

998004414
18G1400: RNCC: 3 | RNVC: 2
LRT-37-012: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-198-7786
Crimpers

991987786
NO PRIMARY REF 99-198-7786: RNCC: 3 | RNVC: 2
12-6264: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-204-8459
Knockout Pun Insert

992048459
NO PRIMARY REF 99-204-8459: RNCC: 3 | RNVC: 2
553: RNCC: 5 | RNVC: 2

19 Oct 1979

5120-99-811-6794
Mechanical Puller

998116794
NO PRIMARY REF 99-811-6794: RNCC: 3 | RNVC: 2
VR2021: RNCC: 5 | RNVC: 2
VR2021: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-946-2288
Socket Wrench

999462288
80-05-43-1111: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-826-4471
Spanner Wrench

998264471
EMER1NSTS703-1F1G3001D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-144-6085
Assembly O R Sleeve

991446085
460002095: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-417-9138
Keeper

994179138
K1/P438A0002: RNCC: 3 | RNVC: 2

9 Aug 1999

5120-99-154-6919

5120-99-880-3825

5120-99-120-6742
Spanner Wrench

991206742
BS2090-TABLE 1 9IN.: RNCC: 4 | RNVC: 1
BS2090: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-417-3271

5120-99-791-6958
Mechanical Puller

997916958
P-891443-405: RNCC: 3 | RNVC: 2
P891443-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-795-5433
Spanner Wrench

997955433
P-891448-405: RNCC: 3 | RNVC: 2
P891448-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-619-7971

5120-99-541-4505
Spanner Wrench

5120-99-075-1800
Male Square Insert

990751800
P-1409: RNCC: 3 | RNVC: 2
P-1409: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-130-0165
Elec Insertion Tool

991300165
497652-3: RNCC: 3 | RNVC: 2
H20642: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-607-1796

5120-99-552-9300

5120-99-540-7059
Spanner Wrench

5120-99-535-3745
Torque Wrench

5120-99-763-9179
Spanner Wrench

5120-99-446-4096
Telegraph E Mattock

994464096
M3446C: RNCC: 3 | RNVC: 1
Y1YA1061: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-923-8166
Spanner Wrench

999238166
MN300: RNCC: 3 | RNVC: 2
0277-54996: RNCC: 6 | RNVC: 9
0277-923-8166: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-777-6258
Spanner Wrench

997776258
42159S: RNCC: 3 | RNVC: 2
727117: RNCC: 5 | RNVC: 2
707443: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-792-9660
Bearin Support Tool

997929660
ST103: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-795-6242
Mechanical Puller

997956242
PE57373: RNCC: 3 | RNVC: 2
PE57373: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-736-8251
Box Wrench

997368251
T2AH8519: RNCC: 3 | RNVC: 2
4719001262: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-728-9825

5120-99-124-2453
Box Wrench

991242453
303-3: RNCC: 3 | RNVC: 2
3AP2254: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-150-0197
Spanner Wrench

991500197
AE4566: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-952-2062
Removal Tool

999522062
A3/54860/A: RNCC: 3 | RNVC: 2
54860/A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-897-2769
Driftpin

998972769
4477-A10: RNCC: 3 | RNVC: 2

21 Sep 1999

5120-99-138-2894
Socket Wrench Socket

991382894
SF221: RNCC: 3 | RNVC: 2
SF221: RNCC: 5 | RNVC: 2
SF 221: RNCC: 6 | RNVC: 9
C569-70T279833: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-7789
Drive Pin Punch

991397789
100161-0000-008: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-423-8263
Blo Nut Pin Spanner

994238263
NO PRIMARY REF 99-423-8263: RNCC: 3 | RNVC: 2
9032-17: RNCC: 5 | RNVC: 2
558965: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-797-6797
Peening Tool

997976797
CHA748-1178: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-565-2540
Hand Tool

995652540
STD419C/65Y: RNCC: 3 | RNVC: 2
26DL-95968: RNCC: 6 | RNVC: 9

20 Jun 2002

5120-99-467-9204
Spanner Wrench

5120-99-467-9182

5120-99-468-5515

5120-99-834-8342

5120-99-931-9519
Ratchet Wrench

5120-99-830-8949

5120-99-829-5532

5120-99-788-3937

5120-99-845-7034
Desiccating Tool

5120-99-193-9405
Extension Wrench Ke

5120-99-136-4222
Plunger Spring Tool

5120-99-462-9653

5120-99-607-9133

5120-99-645-6055
Socket Wrench

996456055
19-64: RNCC: 3 | RNVC: 2
64DE620: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-562-7053
Torque Wrench

995627053
13054: RNCC: 3 | RNVC: 2

16 Sep 2009

5120-99-774-9111
Driver-Drive Block

997749111
AM28542: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-772-6973
Mechanical Puller

997726973
73850: RNCC: 3 | RNVC: 2
310831: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-994-0387
Card Extractor

999940387
3078A413-002: RNCC: 3 | RNVC: 2

7 Nov 2003

5120-99-748-1737
Wrench Adaptor

997481737
NO PRIMARY REF 99-748-1737: RNCC: 3 | RNVC: 2
BA28-103: RNCC: 5 | RNVC: 2
126TS-925: RNCC: 6 | RNVC: 9

11 Sep 2002

5120-99-747-3662
Swage Head

997473662
D12915-56: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-696-3217
Mechanical Puller

996963217
SP-6873-005: RNCC: 3 | RNVC: 2

18 May 2005

5120-99-151-6279
Socket Wrench Handle Ratchet Head

991516279
8754-01 LOCK ON: RNCC: 3 | RNVC: 2
8754-01 LOCK ON: RNCC: 5 | RNVC: 2

27 Apr 2010

5120-99-122-9545
Coil Thread Nozzle

991229545
A30-3: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

10 Mar 1988

5120-99-968-4369
Cross Tip Screwdriver

999684369
BS2559 PART 2 PZ2 X 103: RNCC: 3 | RNVC: 2

8 Jun 2005

5120-99-213-2557
Wrench Extension Handle

992132557
T-13262: RNCC: 3 | RNVC: 2
T-13262: RNCC: 5 | RNVC: 2

19 Jan 2009

5120-99-120-4633
Riveter Collet Jaw

991204633
501-11D: RNCC: 3 | RNVC: 2
1C6966: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-108-4841
Flushing Mandrel

991084841
453 7785-089: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-2089
Hand Blind Riveter

991222089
7311-0010: RNCC: 3 | RNVC: 2
7311-0010: RNCC: 5 | RNVC: 2
BHJ0SRP312: RNCC: 5 | RNVC: 2
7311-0010: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-331-1712
Seal Inserter

993311712
EA6305G669-101: RNCC: 3 | RNVC: 2

17 Apr 2003

5120-99-423-8239
Open End Wrench

994238239
9031-40: RNCC: 3 | RNVC: 2
558094: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-580-5398
Screw Thread Insert Inserter

995805398
A31-13: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-5502
Face Spanner Wrench Socket

996595502
CHA749-158-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-792-5373
Ov Compression Tool

997925373
A3/5001/675.3: RNCC: 3 | RNVC: 2
A3/5001/625.3: RNCC: 5 | RNVC: 2
AG 58: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6007
Open End Wrench

999106007
BS192-TABLE 2 15/16X1-1/8A/F: RNCC: 4 | RNVC: 1
880667M1: RNCC: 5 | RNVC: 2
SLA6306: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5243: RNCC: 6 | RNVC: 9
TABLE I(E) 15/16X1-1/8A/F: RNCC: 6 | RNVC: 9
TABLE 2. 15/16 A/F X 1 1/8 A/F: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-587-9381
Oil Seal Replacer

995879381
LC 550-29A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-5437
Serving Mallet

999105437
A2/9890ITEM2: RNCC: 3 | RNVC: 2
A2/9890: RNCC: 5 | RNVC: 1

1 Jul 1982

5120-99-406-3632
Spanner Wrench

994063632
B7538/8: RNCC: 3 | RNVC: 2
B7538: RNCC: 5 | RNVC: 1
B7538 ITEM 8: RNCC: 5 | RNVC: 2

10 Sep 1992

5120-99-759-1119
Drive Adaptor

997591119
NATEC TC/6/86/2: RNCC: 3 | RNVC: 2
NATEC TC/6/86: RNCC: 5 | RNVC: 1
N.S.M3296: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-437-1650
Spanner

994371650
NO PRIMARY REF 99-437-1650: RNCC: 3 | RNVC: 2
1L91-12695: RNCC: 5 | RNVC: 2
88306-302-095: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-136-2772
Stud Remover And Setter

991362772
H6831: RNCC: 3 | RNVC: 2
34: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 30): RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-611-3471
Punch And Anvil Set

996113471
3302-11: RNCC: 3 | RNVC: 2
1B-6165: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-773-6722
Spanner Wrench

997736722
T10180-407: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-630-8357

5120-99-815-9175

5120-99-819-1788
Jacking Strut

5120-99-812-4045

5120-99-808-0034

5120-99-830-9410

5120-99-560-5927
Box Wrench

5120-99-153-1927
Screw Sto Tommy Bar

991531927
003502016: RNCC: 3 | RNVC: 1
26-080-000: RNCC: 5 | RNVC: 1

30 Jan 2007

5120-99-453-7437
Half M Ring Spanner

994537437
NO PRIMARY REF 99-453-7437: RNCC: 3 | RNVC: 2
KU13105: RNCC: 5 | RNVC: 2
64TN24: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-829-9104
Tyre Valve Remover

998299104
NO PRIMARY REF 99-829-9104: RNCC: 3 | RNVC: 2
2661: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-785-4244
Wrench Spanner

997854244
3/5029/001 ITEM 15: RNCC: 3 | RNVC: 2
S/334: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-254-0923
Switch Lens Remover

992540923
63-38813L: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-795-3824
Spring Compressor

997953824
BR90-13-34-01-0004: RNCC: 3 | RNVC: 2

27 Apr 1995

5120-99-519-2228
Peg Spanner

995192228
MBEU192132: RNCC: 3 | RNVC: 2

10 Dec 2002

5120-99-754-5634

5120-99-654-6914
Torque Wrench Adapter

996546914
A0118085-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-853-3636
Wrench

998533636
2 0080-533: RNCC: 3 | RNVC: 2
12 6396: RNCC: 5 | RNVC: 2

24 Feb 2004

5120-99-764-6659
Blade Track

997646659
1171 H: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-99-423-8232
Socket Wrench

994238232
9030-1: RNCC: 3 | RNVC: 2
558652: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-371-0125
Adaptor Assembly

993710125
MBEU57045-2: RNCC: 3 | RNVC: 2

25 Aug 1995

5120-99-655-3715
Face Spanner Wrench Socket

996553715
83790003-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-799-7679
Spanner Wrench

997997679
A0084770239: RNCC: 3 | RNVC: 2
276-040: RNCC: 5 | RNVC: 2
276040: RNCC: 5 | RNVC: 2
84770239: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-215-2154
Face Spanner Wrench Socket

992152154
EFMC75052-001: RNCC: 3 | RNVC: 2

8 Feb 2003

5120-99-910-5850
Swivel Knob Jeweler's Screwdriver

999105850
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL-9-A: RNCC: 6 | RNVC: 9
DL-9-A-H2271: RNCC: 6 | RNVC: 9
H2271: RNCC: 6 | RNVC: 9
FA16782: RNCC: 6 | RNVC: 9
H2271: RNCC: 6 | RNVC: 9
1C5085: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-495-5159
Mechanical Puller

994955159
CP14407-2: RNCC: 3 | RNVC: 2
CP14407: RNCC: 5 | RNVC: 2
114007ST: RNCC: 6 | RNVC: 9

8 Mar 1990

5120-99-144-2743
Int Extraction Tool

991442743
80404-02-4 ITEM 9: RNCC: 3 | RNVC: 2
39-9938: RNCC: 5 | RNVC: 2
103-953: RNCC: 5 | RNVC: 2

21 May 1991

5120-99-538-6333
Extractor Screw And

995386333
NO PRIMARY REF 99-538-6333: RNCC: 3 | RNVC: 2
F46290: RNCC: 5 | RNVC: 2
AF46290: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-535-3552
Flat Tip Screwdriver

995353552
663-156: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-99-443-4141
Transmissio Adaptor

994434141
9518: RNCC: 3 | RNVC: 2
052ND-007: RNCC: 6 | RNVC: 9

1 Aug 2005

5120-99-254-4441
Test Boy

992544441
000-15-330-000: RNCC: 3 | RNVC: 2

17 Dec 1988

5120-99-842-7005
Inl Extraction Tool

998427005
NO PRIMARY REF 99-842-7005: RNCC: 3 | RNVC: 2
GA265: RNCC: 5 | RNVC: 2
LV7RRGA265: RNCC: 6 | RNVC: 9

1 Apr 1980

5120-99-840-0913
Pressing Tool

998400913
453 7785-079: RNCC: 3 | RNVC: 2

4 Sep 1990

5120-99-797-4079
Screwdriver Bit

997974079
99-72MMBP: RNCC: 3 | RNVC: 2
90/99-72MMBP: RNCC: 5 | RNVC: 2
142-178: RNCC: 5 | RNVC: 2
99-72MMBP: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-749-7572
Rod End.Standard

997497572
980M/75: RNCC: 3 | RNVC: 2
1A4882: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-662-8596
Tool

996628596
2071-09484: RNCC: 3 | RNVC: 2
2071-09484-04-3: RNCC: 5 | RNVC: 2
232871: RNCC: 5 | RNVC: 2

16 Nov 1995

5120-99-654-2965
Mechanical Puller

996542965
P-890144-407: RNCC: 3 | RNVC: 2
P890144-407: RNCC: 5 | RNVC: 2

7 Feb 1980

5120-99-892-4705
Extractor

998924705
E-1802: RNCC: 3 | RNVC: 2
CV185478: RNCC: 5 | RNVC: 2

27 Apr 2011

5120-99-523-8924
Rear Be Press Tool

995238924
00-03-293000: RNCC: 3 | RNVC: 2
293: RNCC: 5 | RNVC: 2
D0055-95/8: RNCC: 6 | RNVC: 9
SR1464/1: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-742-2175
S Torque Multiplier

997422175
PA1113-2153: RNCC: 3 | RNVC: 2
023UQ-0039: RNCC: 6 | RNVC: 9
023SE-009: RNCC: 6 | RNVC: 9

3 Dec 2002

5120-99-720-1583
Hand Hydraulic Jack Kit

997201583
RE4/H15086: RNCC: 3 | RNVC: 2

18 Mar 1999

5120-99-585-8350
Extractor Lever

995858350
A1041001-E: RNCC: 3 | RNVC: 2

26 Apr 2001

5120-99-619-1316

5120-99-627-7132

5120-99-138-1006
Box Wrench

991381006
XS=89: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-716-9887

5120-99-720-0293

5120-99-519-1617

5120-99-783-7170
Coil Thre Extractor

5120-99-812-4035

5120-99-812-4033

5120-99-785-5722

5120-99-414-8194
Oil Seal Guide

994148194
205-730: RNCC: 3 | RNVC: 2
LRT-54-019: RNCC: 5 | RNVC: 9

19 Jan 2010

5120-99-131-8525
Clamp Bracket

991318525
181/13407: RNCC: 3 | RNVC: 2

3 Feb 2004

5120-99-630-3094
Combination Tool

996303094
B99-2523-50: RNCC: 3 | RNVC: 2
X3015456-3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-991-5121
Torque Wrench

999915121
558-1-13429-001: RNCC: 3 | RNVC: 2

15 Jan 2007

5120-99-749-2676
Spanner Wrench

997492676
P-891139-405: RNCC: 3 | RNVC: 2
P891139-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-242-9834
Hand Tube Swaging Tool Kit

992429834
MS-MHSU-U-E-MKIT-M: RNCC: 3 | RNVC: 2
MS-MHSU-U-E-MKIT-M: RNCC: 5 | RNVC: 2

21 May 2013

5120-99-474-5342
Extension Shaft

994745342
ZJEF005589SST-ITEM-008: RNCC: 3 | RNVC: 2
ZJEF005589SST/008: RNCC: 5 | RNVC: 2

20 Dec 2001

5120-99-585-8408
Tool

995858408
70594: RNCC: 3 | RNVC: 2
P070594: RNCC: 5 | RNVC: 2
F070594: RNCC: 5 | RNVC: 2

25 Feb 2002

5120-99-242-9018
Special Tool

992429018
2 0026-143: RNCC: 3 | RNVC: 2
2 0026-143: RNCC: 5 | RNVC: 2

9 Sep 2003

5120-99-746-5463
Hand Terminal Crimping Tool

997465463
29021: RNCC: 3 | RNVC: 2
DEF STAN 59-35 (PART 4) SEC 9A/1: RNCC: 4 | RNVC: 1
BS5310 PART 2B/T: RNCC: 5 | RNVC: 1
H23541: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-764-3884
Piston End Cap

997643884
HJ10/20049-4: RNCC: 3 | RNVC: 2
99-746-0977: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5622
Grommet Punch

999105622
NO PRIMARY REF 99-910-5622: RNCC: 3 | RNVC: 2
A57660-4: RNCC: 5 | RNVC: 2
ADSPEC1097: RNCC: 6 | RNVC: 9
0275-910-5622: RNCC: 6 | RNVC: 9

25 Jul 1979

5120-99-139-7026
Socket Wrench Socket

991397026
SPANNER SOCKET UN 94 A/F 1/2 IN-: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-130-1888
Sprin Tension Gauge

991301888
56978-0020: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-146-2935
Reactor Torque

991462935
S6170-35406-4: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-869-3620
Socket Head Scr Key

998693620
5290-06-KEY 1/4IN.: RNCC: 3 | RNVC: 2

22 Aug 1995

5120-99-304-5207
Fixed Open End Wrench Set

993045207
MP/TORN/NCU-1: RNCC: 3 | RNVC: 2

12 May 1993

5120-99-659-6604
Torque Wrench Adapter

996596604
P-891067-403: RNCC: 3 | RNVC: 2
P891067-403: RNCC: 5 | RNVC: 2
99PE01-310: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-448-8449
Trolley Spanner

994488449
NO PRIMARY REF 99-448-8449: RNCC: 3 | RNVC: 2
1000-8-1: RNCC: 5 | RNVC: 2
88740-704-941: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-413-2170
Jaw Cable Grip

994132170
NO PRIMARY REF 99-413-2170: RNCC: 3 | RNVC: 2
GRIPCABLESINGLEEVE1-2IN: RNCC: 5 | RNVC: 2
5TA114278: RNCC: 5 | RNVC: 2
Y3WB3111: RNCC: 6 | RNVC: 9

2 Feb 1981

5120-99-521-8676
Open End Wrench

995218676
9031-35: RNCC: 3 | RNVC: 2
ST827: RNCC: 6 | RNVC: 9
SR558055: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-745-9327
Spanner Wrench

997459327
T-7064-407: RNCC: 3 | RNVC: 2
T7064-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-745-9374
Spanner Wrench

997459374
T5251-405: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-739-5758
Crankshaft Ro Plate

997395758
VT17877: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-740-0575
Hexagon Bit Adaptor

997400575
10-611: RNCC: 3 | RNVC: 2

16 Jul 1986

5120-99-705-3317
Combination Box And Open End Wrench

997053317
926592: RNCC: 3 | RNVC: 2

4 Nov 2010

5120-99-668-2571
Seal Inserter

996682571
308-605: RNCC: 3 | RNVC: 2
308-605: RNCC: 5 | RNVC: 2

13 Dec 2011

5120-99-725-9392
Valve Spring Lifter

997259392
84770296: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-740-2111
Socket Sleeve

997402111
4974051: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-607-6144
Mechanical Puller

996076144
PE29425: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-4951
Socket Wrench Handle

991224951
S12L: RNCC: 3 | RNVC: 2
KS-5: RNCC: 5 | RNVC: 2
S12L LOCK-ON: RNCC: 6 | RNVC: 9
1L/1224951: RNCC: 6 | RNVC: 9
1L/556: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-835-0927
Drain Plug Wrench

998350927
2257/001: RNCC: 3 | RNVC: 2
907056: RNCC: 5 | RNVC: 2
2257-3-1/2: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-548-8855
Socket Wrench

995488855
SSN07M601-00-1-22: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-654-4027
Mechanical Puller

996544027
460009336B: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-830-7985
Bush Insertion Tool

998307985
V3626-59: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-122-2091
Extract Drill Guide

991222091
RTJ0F164: RNCC: 3 | RNVC: 2
7994-0101: RNCC: 3 | RNVC: 2
7994-0101: RNCC: 5 | RNVC: 2
7994-0160: RNCC: 5 | RNVC: 2
RTJ0F164: RNCC: 5 | RNVC: 9
7994-0101: RNCC: 5 | RNVC: 9
1C7956: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-835-8602
Crankshaft Da Punch

998358602
NO PRIMARY REF 99-835-8602: RNCC: 3 | RNVC: 2
FV148130: RNCC: 5 | RNVC: 2
UE3687: RNCC: 5 | RNVC: 2
LV10FV148130: RNCC: 6 | RNVC: 9

17 Jan 1990

5120-99-607-5837
Mechanical Puller

996075837
NO PRIMARY REF 99-607-5837: RNCC: 3 | RNVC: 2
PE27030: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-745-9349
Dust C Fitting Tool

997459349
T8744-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-411-9060
Tubular Key Spanner

994119060
NO PRIMARY REF 99-411-9060: RNCC: 3 | RNVC: 2
ST1782: RNCC: 5 | RNVC: 9
27Q13611: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-984-8483
Drive Assembly Tool

999848483
40210: RNCC: 3 | RNVC: 2
A3-3113-P-0051: RNCC: 6 | RNVC: 9
4921-186: RNCC: 6 | RNVC: 9

8 Oct 2012

5120-99-946-0821
Cont Insertion Tool

999460821
NO PRIMARY REF 99-946-0821: RNCC: 3 | RNVC: 2
558-1-00585: RNCC: 5 | RNVC: 2
2CZ139039: RNCC: 5 | RNVC: 2
1H229: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-429-5374
Hand Terminal Crimping Tool

994295374
DCC 1113: RNCC: 3 | RNVC: 2
044DF-001: RNCC: 6 | RNVC: 9

6 Jan 2005

5120-99-446-4098
Teleg Mattock Helve

994464098
NO PRIMARY REF 99-446-4098: RNCC: 3 | RNVC: 2
M3446C: RNCC: 5 | RNVC: 2
Y1YA1064: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-306-3158
Socket Wrench Socket

993063158
SM14 LOCK-ON: RNCC: 3 | RNVC: 2
SM14 LOCK-ON: RNCC: 5 | RNVC: 2

25 Mar 1998

5120-99-471-3837
Socket Wrench Adapter

994713837
T 515361: RNCC: 3 | RNVC: 2
FB 212933: RNCC: 5 | RNVC: 2
0625P-218: RNCC: 6 | RNVC: 9
062CE-090: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-147-4182
Socket Wrench Extension

991474182
SST/Y/270/40/0426/133: RNCC: 3 | RNVC: 2
Y/270/40/0426/133: RNCC: 5 | RNVC: 1

26 Jan 1998

5120-99-607-5438
Sprea Tool Assembly

996075438
NO PRIMARY REF 99-607-5438: RNCC: 3 | RNVC: 2
PE26019: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-391-3122
Hand Blind Riveter

993913122
NO PRIMARY REF 99-391-3122: RNCC: 3 | RNVC: 2
487-157: RNCC: 5 | RNVC: 2
AF7002: RNCC: 5 | RNVC: 2

28 Jun 2012

5120-99-496-1047
Two Pin Tool

994961047
DR3180-0014-SA: RNCC: 3 | RNVC: 2

16 Apr 1993

5120-99-411-9036
Drift

994119036
NO PRIMARY REF 99-411-9036: RNCC: 3 | RNVC: 2
ST1652: RNCC: 5 | RNVC: 9
27Q12317: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-9031
In Checking Feature

994119031
NO PRIMARY REF 99-411-9031: RNCC: 3 | RNVC: 2
ST2711: RNCC: 5 | RNVC: 9
27Q17221: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-670-4445
Socket Wrench

996704445
LT22233: RNCC: 3 | RNVC: 2
LT22233: RNCC: 5 | RNVC: 2

5 Jun 1995

5120-99-201-8741
Bearing Extra Shell

992018741
NO PRIMARY REF 99-201-8741: RNCC: 3 | RNVC: 2
444-31-068-0: RNCC: 5 | RNVC: 9
W3-00001-04532: RNCC: 6 | RNVC: 9

1 Mar 1977

5120-99-660-9708
Contact Extrac Tool

996609708
3473-10701-40-4: RNCC: 3 | RNVC: 2
839 S 001: RNCC: 5 | RNVC: 2

10 Nov 1994

5120-99-466-5469
Bod Holder Assembly

994665469
NO PRIMARY REF 99-466-5469: RNCC: 3 | RNVC: 2
558-1-00241: RNCC: 5 | RNVC: 2
1H351: RNCC: 6 | RNVC: 9

7 Nov 1979

5120-99-173-0820
Flat Tip Screwdriver

991730820
111114/017: RNCC: 3 | RNVC: 2
GM-U-121601/1: RNCC: 5 | RNVC: 2
FK9706W0096: RNCC: 6 | RNVC: 9

4 Feb 1998

5120-99-827-6087
Mechanical Puller

998276087
NO PRIMARY REF 99-827-6087: RNCC: 3 | RNVC: 2
08-0224-0: RNCC: 5 | RNVC: 2
AST-3005: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-548-0865
Torque Wrench Adapter

995480865
A1207: RNCC: 3 | RNVC: 2
734-351946: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-134-8773
Mechanical Puller Forcing Screw

991348773
EA6205G570-105: RNCC: 3 | RNVC: 2

21 May 2008

5120-99-424-9950
Pliers

994249950
4232: RNCC: 3 | RNVC: 2
4232: RNCC: 3 | RNVC: 2
88411-400-283: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-427-8665
Bit Screwdriver

994278665
NO PRIMARY REF 99-427-8665: RNCC: 3 | RNVC: 2
3AP3477: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-724-4441
Gear Remover

997244441
LRT-12-031: RNCC: 3 | RNVC: 2
18G.1464: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-785-3875
Valve Adjus Spanner

997853875
SK.94: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-710-4916

5120-99-556-1499
Spanner Wrench

5120-99-124-2281
Combination Box And Open End Wrench

991242281
OEX40: RNCC: 3 | RNVC: 2
RJ1250: RNCC: 5 | RNVC: 2
H23061: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H6455: RNCC: 6 | RNVC: 9
99-768-7348: RNCC: 6 | RNVC: 9
1L361: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-834-5613
Hand Hammer

998345613
BS876: RNCC: 4 | RNVC: 1
BS876 TABLE 9-1.8 KG: RNCC: 5 | RNVC: 1
NPPO/GAMA4B/19/06/03: RNCC: 6 | RNVC: 9

13 Feb 1992

5120-99-580-5266
Tang Break Of Punch

995805266
NO PRIMARY REF 99-580-5266: RNCC: 3 | RNVC: 2
1195-3: RNCC: 5 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-7664
Spanner Wrench

994547664
MDSK858-93: RNCC: 3 | RNVC: 2
720309: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-131-8722
Extension Assembly

991318722
EA6305G577-045: RNCC: 3 | RNVC: 2

14 Mar 2004

5120-99-607-9162
Drift Pad

996079162
NO PRIMARY REF 99-607-9162: RNCC: 3 | RNVC: 2
PE9180: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-726-5574
Socket Wrench

997265574
41762-409-0: RNCC: 3 | RNVC: 2
H/WB/808/1246: RNCC: 5 | RNVC: 2
H/WB/808/1246: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-722-7780
Spring Extender

997227780
3201-89123-01-1: RNCC: 3 | RNVC: 2
3201-89123-01: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-341-0804
Spanner Wrench

993410804
LT-16556: RNCC: 3 | RNVC: 2

13 Jan 2001

5120-99-500-8728
Socket Wrench Socket

995008728
SM20 LOCK-ON: RNCC: 3 | RNVC: 2
SM20 LOCK-ON: RNCC: 5 | RNVC: 2

25 Mar 1998

5120-99-736-5725
Socket Wr Extension

5120-99-746-5115

5120-99-744-2076
Special Screwdriver

5120-99-567-0584
Torque Wrench Adapter

995670584
460005672: RNCC: 3 | RNVC: 2
100405-9001-333: RNCC: 5 | RNVC: 2
UW231B1: RNCC: 6 | RNVC: 9

27 Jan 1993

5120-99-832-8155
Flat Tip Screwdriver

998328155
111114/019: RNCC: 3 | RNVC: 2
GM-U-121601/3: RNCC: 5 | RNVC: 2
FK9706W0098: RNCC: 6 | RNVC: 9

4 Feb 1998

5120-99-574-0900
Socket Wrench Extension

995740900
453 7094-004: RNCC: 3 | RNVC: 2

29 Jul 1991

5120-99-105-2119
Open End Wrench

991052119
NMT-251: RNCC: 3 | RNVC: 2

1 Dec 1998

5120-99-460-9713
Socket Wrench

994609713
UCW6400-53: RNCC: 3 | RNVC: 2
CJ219: RNCC: 6 | RNVC: 9
161219: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-459-0604
Withdr Slip Adaptor

994590604
HW17077: RNCC: 3 | RNVC: 2
64VV1591: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-204-4063

5120-99-803-0216
Socket Wrench Handle Bar

998030216
NO PRIMARY REF 99-803-0216: RNCC: 3 | RNVC: 2
LV6MT2-21666: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-7743
Rivet Bucking Bar

999107743
DEF1221-H582: RNCC: 2 | RNVC: 2
DEF1221: RNCC: 5 | RNVC: 2
H582: RNCC: 6 | RNVC: 9
9107743: RNCC: 6 | RNVC: 9
1C5394: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5991
Socket Wrench

999105991
BS2558: RNCC: 4 | RNVC: 1
H5229: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H5229: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-7744
Rivet Bucking Bar

999107744
DEF1221-H583: RNCC: 2 | RNVC: 2
DEF1221: RNCC: 5 | RNVC: 2
1C5395: RNCC: 6 | RNVC: 9
H583: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-829-3999
Mechanical Puller

998293999
NO PRIMARY REF 99-829-3999: RNCC: 3 | RNVC: 2
WE5-1341-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-350-2958
Piston Ring Compressor

993502958
660370: RNCC: 3 | RNVC: 2
AB/5/8/6201: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-253-6909
Viscosit Comparator

992536909
11-P461Z1817: RNCC: 3 | RNVC: 2
20225B: RNCC: 5 | RNVC: 1
T.750/3: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-974-1024
Inspection Gauge

999741024
HU25310/1: RNCC: 3 | RNVC: 2
98PK01-460: RNCC: 6 | RNVC: 9

22 Feb 1999

5120-99-543-2389
Open End Wrench

995432389
SKE2388-105: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-946-0816
Electrical Inserter

999460816
NO PRIMARY REF 99-946-0816: RNCC: 3 | RNVC: 2
BKB2544-1: RNCC: 5 | RNVC: 2
2CZ138884: RNCC: 5 | RNVC: 2
WTA170883: RNCC: 5 | RNVC: 2
WTA170883: RNCC: 5 | RNVC: 2
K678-678304: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-1725
Flat Tip Screwdriver

991371725
BS2559:PART 1: RNCC: 4 | RNVC: 1
DEF STAN 51-11 (PART 17): RNCC: 4 | RNVC: 1
H6986: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-825-6741
Front Housing Repla

998256741
NO PRIMARY REF 99-825-6741: RNCC: 3 | RNVC: 2
MF218A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-918-0069
Wheel Nut Wrench

999180069
42857-201-08: RNCC: 3 | RNVC: 2
FL001880084: RNCC: 6 | RNVC: 9

19 Jul 2000

5120-99-435-1792
Mechanical Puller

994351792
H13-88-533: RNCC: 3 | RNVC: 2
26SW95367: RNCC: 6 | RNVC: 9
26SW95367: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-739-8800
Bush Inserting Tool

997398800
AE1198-405: RNCC: 3 | RNVC: 2

17 Jan 1986

5120-99-554-0944
Ratchet Wrench

995540944
B5775-12C: RNCC: 3 | RNVC: 2
B57751TEM12C: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-776-9834
Wrench Spanner

5120-99-564-9033
Closure Tool

5120-99-554-4245
Nonr Ratchet Wrench

5120-99-465-4682

5120-99-714-1481

5120-99-858-5479
Open End Wrench

998585479
NMT-273: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-99-758-5289
Clamp Ring Tool

997585289
BL/D2949INST: RNCC: 3 | RNVC: 2
BLD2949: RNCC: 5 | RNVC: 2

18 Jul 1990

5120-99-767-1698
Spanner Wrench

997671698
MBEU-55767: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-713-3735
Seal Lead

997133735
NO PRIMARY REF 99-713-3735: RNCC: 3 | RNVC: 2
AE2276: RNCC: 5 | RNVC: 2
27M13423: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-832-0211
Wrench Adjustable

998320211
453 7094-008: RNCC: 3 | RNVC: 2

25 Jul 1991

5120-99-274-4435
Swivel Knob Jeweler's Screwdriver Set

992744435
TL-502-298: RNCC: 3 | RNVC: 2

28 Nov 2007

5120-99-660-4880
Torque Wrench Adapter

996604880
29755: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-99-328-4600
Bearing Staking Installation Tool

993284600
PE34918: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-99-322-3768
Torque Wrench

993223768
011200-B38460: RNCC: 3 | RNVC: 2

12 Nov 2010

5120-99-402-0072
Brush Change Dolly

994020072
NO PRIMARY REF 99-402-0072: RNCC: 3 | RNVC: 2
16C6546: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-455-2541
Seal Hous Extractor

994552541
EA6305G677-041: RNCC: 3 | RNVC: 2

7 Jun 2008

5120-99-800-1770
Mechanical Puller

998001770
702474: RNCC: 3 | RNVC: 2
702474-911: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-794-4186
Socket Wrench Socket

997944186
WS 603-4: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-651-6333
Socket Wrench

996516333
01T-C-10667: RNCC: 3 | RNVC: 2
01TC10667: RNCC: 5 | RNVC: 2
01TC10667: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-545-3320
Torque Wrench

995453320
900216-0083: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-525-5584
Spanner Wrench

995255584
85-119-19-10-1011: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-051-8880
Operating Tool

990518880
A3/15049: RNCC: 3 | RNVC: 2
15049: RNCC: 5 | RNVC: 2

21 Apr 1995

5120-99-710-4450
Ball Bear Extractor

997104450
NO PRIMARY REF 99-710-4450: RNCC: 3 | RNVC: 2
PE8842: RNCC: 5 | RNVC: 9

28 May 1970

5120-99-411-9021
Drift

994119021
NO PRIMARY REF 99-411-9021: RNCC: 3 | RNVC: 2
ST1686: RNCC: 5 | RNVC: 9
27Q12995: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-991-5022
Applicator

999915022
SD3/267932: RNCC: 3 | RNVC: 2
SD3/267932: RNCC: 5 | RNVC: 2

1 Sep 1999

5120-99-431-7303
Spanner Wrench

994317303
UCW3701-32: RNCC: 3 | RNVC: 2
0433-2285: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-7339
Box Wrench

997107339
RA2226: RNCC: 3 | RNVC: 2
0E4273: RNCC: 5 | RNVC: 2
RA1822: RNCC: 5 | RNVC: 2
1701034: RNCC: 5 | RNVC: 2
W20RR0E4273: RNCC: 6 | RNVC: 9
W20RR106: RNCC: 6 | RNVC: 9
729-465889: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-471-4054
Socket Wrench Set

994714054
SME 11A-ASTUTE: RNCC: 3 | RNVC: 2
SME 11A-ASTUTE: RNCC: 5 | RNVC: 2

14 Mar 2007

5120-99-910-4597
Fid

999104597
UK1SCS3010: RNCC: 3 | RNVC: 1
910-4597: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-631-9988
Strap

5120-99-031-7511
Seal Inserter

5120-99-984-7035
Spanner Wrench

5120-99-255-7004
Mechanical Puller Attachment

992557004
11-P461F1951: RNCC: 3 | RNVC: 2
20225A: RNCC: 5 | RNVC: 1
T.710/13/1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-9878
Bli Riveter Mandrel

991209878
29G 11: RNCC: 3 | RNVC: 2
29G 11: RNCC: 5 | RNVC: 2
7161-7003: RNCC: 5 | RNVC: 2
7161-7003: RNCC: 5 | RNVC: 2
1C7852: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-1155
Magnetron Tuning To

991391155
NO PRIMARY REF 99-139-1155: RNCC: 3 | RNVC: 2
B41200-400: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-4672
Hand Hammer

999104672
NW 260: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 31): RNCC: 4 | RNVC: 1
FA14165: RNCC: 6 | RNVC: 9
1K78: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-812-6880
Cross Tip Screwdriver

998126880
SE125PH2: RNCC: 3 | RNVC: 2
PN00002984: RNCC: 5 | RNVC: 2

18 Mar 2008

5120-99-122-8426
Open End Box Wrench

991228426
RX40: RNCC: 3 | RNVC: 2
RX40: RNCC: 5 | RNVC: 2
1C8130: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-206-8163
Feeler Rod Assembly

992068163
NGL96: RNCC: 3 | RNVC: 2
9184030: RNCC: 5 | RNVC: 2
HK222: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-572-6615
Socket Wrench Socket

995726615
27088: RNCC: 3 | RNVC: 2
CV177474: RNCC: 5 | RNVC: 2

1 Mar 2011

5120-99-690-7769
Jack Ram Extension

996907769
OE-B-14519: RNCC: 3 | RNVC: 2

7 Mar 2011

5120-99-736-6817
Fixed Open End Wrench Set

997366817
S1003113: RNCC: 3 | RNVC: 2
730/08/13-22: RNCC: 6 | RNVC: 9

11 Oct 2005

5120-99-702-1069
Steering Arm

997021069
CSDE/CHK/GSS/26: RNCC: 3 | RNVC: 2
CSDE/CHK/GSS/026: RNCC: 5 | RNVC: 2
26CK-1126: RNCC: 6 | RNVC: 9
26CK 1126: RNCC: 6 | RNVC: 9

22 Mar 1996

5120-99-075-0424
Spanner Wrench

990750424
83790029: RNCC: 3 | RNVC: 2
85-690-3873: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-613-6165
Hand Tube Bender

996136165
NO PRIMARY REF 99-613-6165: RNCC: 3 | RNVC: 2
18255-85: RNCC: 5 | RNVC: 2
18255-85: RNCC: 5 | RNVC: 9

1 Jun 2011

5120-99-420-4049
Assembly Post

994204049
NO PRIMARY REF 99-420-4049: RNCC: 3 | RNVC: 2
ST1256: RNCC: 5 | RNVC: 9
27Q16262: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-500-3930
Screwdriver

995003930
NO PRIMARY REF 99-500-3930: RNCC: 3 | RNVC: 2
5006/8" (STANLEY): RNCC: 5 | RNVC: 2
5006/8IN.: RNCC: 5 | RNVC: 9

11 Dec 1995

5120-99-133-6113
Quick Adjusting Screw Clamp

991336113
202-036701: RNCC: 3 | RNVC: 2
202-036701: RNCC: 5 | RNVC: 2

19 Oct 2005

5120-99-719-6603
Open End Wrench

997196603
K84-88-5453: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-423-4572
Impact Pi Extractor

994234572
NO PRIMARY REF 99-423-4572: RNCC: 3 | RNVC: 2
9164-14: RNCC: 5 | RNVC: 2
557706: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-432-4402
Box Spanner

994324402
NO PRIMARY REF 99-432-4402: RNCC: 3 | RNVC: 2
37-56978: RNCC: 5 | RNVC: 2
88870-363-177: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-416-3061
Open End Wrench

994163061
EA1-88-877: RNCC: 3 | RNVC: 2
26FZ-95493: RNCC: 6 | RNVC: 9
26FZ95493: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-968-6975
Open End Wrench

999686975
NO PRIMARY REF 99-968-6975: RNCC: 3 | RNVC: 2
KEN-582-0810K: RNCC: 5 | RNVC: 2
KEN-582-0810K: RNCC: 6 | RNVC: 9

6 Sep 2011

5120-99-138-0537
Screw Thread Insert Inserter

991380537
M1P108: RNCC: 3 | RNVC: 2
DEFSTAN51-17: RNCC: 4 | RNVC: 1
DFC03030100000: RNCC: 5 | RNVC: 2
M1P 108: RNCC: 5 | RNVC: 2
1B: RNCC: 6 | RNVC: 9
1C8404: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-808-2425
Socket Wrench

998082425
FV679754: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-834-9625
Spanner Wrench

998349625
262006: RNCC: 3 | RNVC: 2
MGWS42A: RNCC: 6 | RNVC: 9

3 Apr 2008

5120-99-811-2501
Engine Barring Tool

998112501
FV668398: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-987-5195
Plug Spanner

5120-99-982-0233

5120-99-451-1739

5120-99-451-1753

5120-99-219-4895
Open End Wrench

992194895
697/1/04051/000: RNCC: 3 | RNVC: 2
697/7/04051/000: RNCC: 5 | RNVC: 2
UW214C: RNCC: 6 | RNVC: 9

11 Mar 1998

5120-99-787-9815
Socket Wrench Socket

997879815
KM133: RNCC: 3 | RNVC: 2
KM133-A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-2294
Box Wrench

991382294
NO PRIMARY REF 99-138-2294: RNCC: 3 | RNVC: 2
41-04-55-07: RNCC: 5 | RNVC: 2
1C8224: RNCC: 6 | RNVC: 9
20-5.5X7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5971
Box Wrench

999105971
BS3555-TABLE 2 13/16X7/8A/F: RNCC: 4 | RNVC: 1
2RB8187: RNCC: 5 | RNVC: 2
H21899: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 17: RNCC: 6 | RNVC: 9
H5209: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-881-4486
Box Wrench

998814486
NO PRIMARY REF 99-881-4486: RNCC: 3 | RNVC: 2
CBZ7044-116: RNCC: 5 | RNVC: 2
ET116: RNCC: 5 | RNVC: 2
7044-116: RNCC: 5 | RNVC: 2
Z7044-116: RNCC: 5 | RNVC: 2
LV6MT12CB7044-116: RNCC: 6 | RNVC: 9
16C3389: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6012
Open End Wrench

999106012
BS192-TABLE 2: RNCC: 4 | RNVC: 1
BS192: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 1: RNCC: 6 | RNVC: 9
GROUP A FIG 1 TABLE 2: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H5248: RNCC: 6 | RNVC: 9
9/16 A/F X 5/8 A/F SLIM SERIES: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-954-0190
Wire Twister Pliers

999540190
H6305: RNCC: 2 | RNVC: 2
H20032: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-953-8974
Socket Wrench Spanner Attachment

999538974
29719: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-429-4411
Nose Ring Tool

5120-99-666-0565
Bush Guide

996660565
AE8396GSEREF6: RNCC: 3 | RNVC: 2

12 Nov 2003

5120-99-553-6545
Socket Wrench Socket

995536545
14103: RNCC: 3 | RNVC: 2
14103: RNCC: 5 | RNVC: 2

6 Jun 2012

5120-99-662-1754

5120-99-728-4023

5120-99-787-5523
Oil Seal Replacer

997875523
PD170-1: RNCC: 3 | RNVC: 2
MF416: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-783-2963
Flexibl Screwdriver

997832963
4862/9: RNCC: 3 | RNVC: 2
GF00001702: RNCC: 5 | RNVC: 2
5013969594102: RNCC: 5 | RNVC: 2
143-146: RNCC: 5 | RNVC: 2
0014A0063: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-492-8721
Torque Multiplier A

994928721
YN74950: RNCC: 3 | RNVC: 2

13 Jun 2001

5120-99-124-1044
Socket Wrench Socket

991241044
AD525: RNCC: 3 | RNVC: 2
BS4006-TABLE 10 1/4WHIT: RNCC: 4 | RNVC: 1
AK173: RNCC: 5 | RNVC: 2
85-101-2414: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-738-9407
Bearing And Bushing Driver Plug

997389407
708290: RNCC: 3 | RNVC: 2
001292307/040: RNCC: 5 | RNVC: 1
001292307/040 ITEM 9: RNCC: 5 | RNVC: 2
001292307/040/9: RNCC: 5 | RNVC: 2
708285 ITEM 9: RNCC: 5 | RNVC: 2
708285/9: RNCC: 5 | RNVC: 2

13 Feb 1992

5120-99-114-4818
Face Spanner Wrench Socket

991144818
HU.16296/4: RNCC: 3 | RNVC: 2
HU.16296: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-127-5858
Socket Wrench Socket

991275858
AD500: RNCC: 3 | RNVC: 2
MLA216: RNCC: 3 | RNVC: 2
BS4006-TABLE 9 1/2A/F: RNCC: 4 | RNVC: 1
AB500: RNCC: 5 | RNVC: 2
851662: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-610-0608
Seal Guide

996100608
CH648-240: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-748-5891
Rivet Bucking Bar

997485891
3613-A3/403: RNCC: 3 | RNVC: 2
3613A3-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-962-1213
Feed Spindle Wrench

999621213
R.G.F.11041D/46: RNCC: 3 | RNVC: 1
M4MC1704: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5488
Elect Adjusting Pin

999105488
NO PRIMARY REF 99-910-5488: RNCC: 3 | RNVC: 2
H1699: RNCC: 5 | RNVC: 2
FA15521: RNCC: 6 | RNVC: 9
1B3590: RNCC: 6 | RNVC: 9

4 Feb 1984

5120-99-449-0177
Soc Universal Joint

994490177
NO PRIMARY REF 99-449-0177: RNCC: 3 | RNVC: 2
2091: RNCC: 5 | RNVC: 9
851682: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-9657
Crimping To Locator

991379657
SL47B1: RNCC: 3 | RNVC: 2
N78208-99: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-894-0905
Bearing And Bushing Inserter And Remover

998940905
308-543: RNCC: 3 | RNVC: 2
LRT-37-043: RNCC: 5 | RNVC: 2

16 Dec 2009

5120-99-830-7366
Oil Seal Repl Plate

998307366
NO PRIMARY REF 99-830-7366: RNCC: 3 | RNVC: 2
6999016: RNCC: 5 | RNVC: 2

27 Jul 1990

5120-99-805-8644
Oil Seal Replacer

998058644
NO PRIMARY REF 99-805-8644: RNCC: 3 | RNVC: 2
61-3006: RNCC: 5 | RNVC: 9

7 Aug 1990

5120-99-120-9540
Torque Ring Spanner

991209540
120-9540: RNCC: 3 | RNVC: 2
1701080: RNCC: 5 | RNVC: 2
T2EM6973: RNCC: 5 | RNVC: 2
T2EN6973: RNCC: 5 | RNVC: 2
1L/1209540: RNCC: 6 | RNVC: 9
1L1209540: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-687-1673
Installation Tool

996871673
182/05866: RNCC: 3 | RNVC: 2
182/05866: RNCC: 5 | RNVC: 2
SM765A: RNCC: 6 | RNVC: 9

17 Feb 2000

5120-99-756-7754
Jaw

997567754
7342-2212: RNCC: 3 | RNVC: 2
7342-2212: RNCC: 5 | RNVC: 2
7342-2205: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-910-1472
Tap And Reamer Wrench

999101472
ADSPEC1064: RNCC: 4 | RNVC: 1
ATW5: RNCC: 5 | RNVC: 2
0271-910-1472: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-664-0078
Mechanical Puller

996640078
48415-A33-403: RNCC: 3 | RNVC: 2
48415A33-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-770-6764
Insertion Tool

997706764
05-2241-16: RNCC: 3 | RNVC: 2
1H-1035: RNCC: 6 | RNVC: 9
1H/1035: RNCC: 6 | RNVC: 9

25 Apr 1991

Load More Results