What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

What is a Grommet Inserting Punch And Die?

A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Tap Extractor?

A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

A Crowbar is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hand Caulking Tool?

A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.

What is a Hand Hammer?

A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).

What is a Lamp Extractor?

A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.

What is a Stuffing Box And Pump Packing Extractor?

A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.

What is a Rivet Bucking Bar?

A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.

What is a Craftsman's Tweezers?

A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.

What is a Hand Terminal Crimping Tool?

A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.

What is a Screw Thread Insert Extractor?

A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.

Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by United Kingdom (UK) - NCB is 99

Page 102 of 108

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by United Kingdom

51	20	99	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - United Kingdom (UK)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 15 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Grommet Inserting Punch And Die? 19 Items: A Grommet Inserting Punch And Die (PUNCH AND DIE,GROMMET INSERTING) is a two piece item consisting of a punch and dielike anvil designed for inserting spur or eyelet type grommets in cloth, leather and the like. In use the material and grommet parts are placed between the punch and die; the punch is then struck with a hammer to securely fasten the grommet parts to the material.
What is a Hand Hydraulic Jack? 122 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 144 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 332 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 27 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 14 Items
What is a Hand Tube Flaring Tool? 14 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Drain Plug Wrench? 20 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 26 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 14 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 2223 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Swage,Top,Blacksmith's 11 Items
What is a Pipe Wrench? 38 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 204 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 35 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
What is a Tap Extractor? 13 Items: A Tap Extractor (EXTRACTOR,TAP) is excludes EXTRACTOR, SCREW.
Screwdriver,Offset 37 Items
What is a Screwdriver Bit? 293 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Socket Wrench Socket? 1255 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 634 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 697 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 11 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 301 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
What is a Hand Tube Bender? 18 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 570 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 51 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pry Bar? 11 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 13 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Crowbar? 10 Items: A Crowbar is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 170 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 192 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 11 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 36 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
What is a Hand Caulking Tool? 14 Items: A Hand Caulking Tool (CAULKING TOOL,HAND) is refer to Reference Drawing Group A before using item name. See also CAULKING IRON, WOOD; HAWSING IRON and YARNING IRON.
Face,Hammer,Inserted 44 Items
What is a Hole Sheet Metal Holder? 10 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Hand Rivet Set? 35 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Socket Wrench Handle Bar? 256 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Riveter,Blind,Hand 73 Items
What is a Hand Shovel? 25 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 19 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 12 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Piston Ring Compressor? 32 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Fid? 16 Items: A Fid is a tool made of wood and shaped as a cone. Used to separate strands of rope in splicing and marling. It may be hand-held or may stand on a flat base. Excludes CABLE PICK and MARLINESPIKE.
What is a Hand Hammer? 220 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
What is a Lamp Extractor? 38 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Stuffing Box And Pump Packing Extractor? 11 Items: A Stuffing Box And Pump Packing Extractor (EXTRACTOR,STUFFING BOX AND PUMP PACKING) is a rigid or flexible shaft having a pointed hook or screw end or one pointed hook and one curved end (double ender) to pick or pull out packing from pumps and stuffing boxes. See also PACKING TOOL, JOURNAL BOX, RAILWAY.
What is a Rivet Bucking Bar? 21 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 53 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 229 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is a Cross Tip Screwdriver? 140 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 19 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 18 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 61 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Socket Wrench Adapter-Extension? 19 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 32 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 182 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 10 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 12 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 283 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 10 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 16 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 22 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 1302 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 266 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 89 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 567 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 12 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand Contact Burnisher? 12 Items: A Hand Contact Burnisher (BURNISHER,CONTACT,HAND) is a handled item specifically designed for cleaning contact points of relays and the like.
What is a Tire Iron? 14 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 69 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Machinist's Vise? 29 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Fixed Open End Wrench Set? 22 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Socket Wrench Set? 58 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is a Combination Box And Open End Wrench Set? 14 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 62 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
What is a Piston Ring Expander? 16 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
What is a Socket Wrench Handle Ratchet Head? 23 Items: A Socket Wrench Handle Ratchet Head (RATCHET HEAD,SOCKET WRENCH HANDLE) is a reversible ratcheting mechanism having a square external end designed to fit into the internal end of a wrench socket or attachment, and has provisions for a round bar grip, but does not include the bar. When furnished with a bar, see HANDLE, SOCKET WRENCH. Excludes RATCHET ATTACHMENT, SOCKET WRENCH.
What is a Mechanical Puller? 1029 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 43 Items
What is a Slip Joint Pliers? 16 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 99 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 33 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 18 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 16 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 12 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 10 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 51 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Spanner Wrench Set? 16 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Solid Center Punch? 18 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Combination Open End And Spanner Wrench? 31 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Mechanical Puller Adapter? 17 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Terminal Crimping Tool Contact Positioner? 73 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 17 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is a Screw Thread Insert Tang Breakoff Tool? 57 Items: A Screw Thread Insert Tang Breakoff Tool (TANG BREAKOFF TOOL,SCREW THREAD INSERT) is a punch designed to fit within a coiled wire thread insert to manually or mechanically break off the tang by which the insert was threaded into the hole.
What is an Adjustable Wrench? 74 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 184 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 25 Items
What is a Socket Wrench Spanner Attachment? 64 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 11 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Bearing And Bushing Inserter? 62 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 57 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 260 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 29 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 30 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 86 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 12 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 41 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 59 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 13 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 40 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 45 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Pin Remover? 17 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 14 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Pin Inserter? 12 Items: A Pin Inserter (INSERTER,PIN) is a hand tool designed to facilitate the insertion of a pin into a hole.
What is a Spring Inserter And Remover? 28 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 19 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Crimping Tool Die? 83 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is a Bearing Staking Installation Tool? 29 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
What is a Sealant Dispenser? 13 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Torque Handle? 44 Items: A Torque Handle (HANDLE,TORQUE) is a bar like item used to apply torque to a nut, bolt, screw, or the like through the media of specifically designed end attachments about which the torque radius is measured. It has facilities for indicating the amount of applied torque. It is not designed for direct mating with bolts; nuts; or socktes, socket spanner and does not include end attachments. Excludes WRENCH, TORQUE.
What is a Turnlock Fastener Clinching Punch? 31 Items: A Turnlock Fastener Clinching Punch (PUNCH,CLINCHING,TURNLOCK FASTENER) is a hand tool used to prepare sheet metal for the installation of an EYELET, TURNLOCK FASTENER. In use it is struck with a mallet. May be used in conjunction with a BLOCK, CLINCHING PUNCH, TURNLOCK FASTENER.
What is a Wire Twister Pliers? 12 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 112 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is an Inspection Mirror Head? 10 Items: An Inspection Mirror Head (MIRROR HEAD,INSPECTION) is a device to be attached to the end of a rod of a MIRROR,INSPECTION. It is designed to form images by reflextion by the application of metallic coating or backing such as nitrate or silver to one side.
What is a Flat Tip And Cross Tip Screwdriver Set? 17 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is an Oil Filter Wrench? 12 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 650 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Rotating Members Aligning Tool? 10 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
Handle,Hydraulic Jack 35 Items
Handle,Mechanical Jack 17 Items
What is a Drift? 60 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Hydraulic Fitting Crimping Tool Head? 24 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 62 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Screwdriver Bit Holder? 10 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.

Stock Items From Supply Class 5120 Page 102 of 108

5120-99-957-6978
Seal Installer

999576978
J37668-A: RNCC: 3 | RNVC: 2
FH980350016: RNCC: 6 | RNVC: 9

8 May 1998

5120-99-139-7036
Socket Wrench Extension

991397036
SOCKET EXTENSION 10 IN. LG 3/8 -: RNCC: 3 | RNVC: 1
EB5A: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-6846
Combination Box And Open End Wrench

991386846
RJM21: RNCC: 3 | RNVC: 2
RJM21: RNCC: 6 | RNVC: 9
1C1386846: RNCC: 6 | RNVC: 9
99-615-6126: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-5125
Socket Wrench Socket

991225125
KS281: RNCC: 3 | RNVC: 2
S281 LOCK-ON: RNCC: 6 | RNVC: 9
1L518: RNCC: 6 | RNVC: 9
99-910-6370: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-139-0774
Socket Ratchet Head

991390774
1013-809 2: RNCC: 3 | RNVC: 2
100175-9000-167: RNCC: 5 | RNVC: 1
100175-9000-167 ITEM 2: RNCC: 5 | RNVC: 2
11015: RNCC: 5 | RNVC: 2
DTH808: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-721-9618
Hand Hydraulic Jack

997219618
250183.0: RNCC: 3 | RNVC: 2
450274.4: RNCC: 5 | RNVC: 2
ATDX3-260: RNCC: 5 | RNVC: 2
710.1.55.220.0: RNCC: 5 | RNVC: 2
ATDX3-260: RNCC: 5 | RNVC: 2
710.1.55.220.0: RNCC: 5 | RNVC: 2

14 Sep 1994

5120-99-135-3693
Socket Wrench

991353693
BS2558-TABLE 6 5.00X5.50MM: RNCC: 3 | RNVC: 1
TUBULARB0XSPANNERGRADEA5X5-5MM: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 3: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6747: RNCC: 6 | RNVC: 9
TABLE I(A) 5.00X5.50MM: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-2289
Socket Wrench Socket

991242289
HB1062: RNCC: 3 | RNVC: 2
LSA234: RNCC: 3 | RNVC: 2
BS4006-TABLE 21 1-1/16A/F: RNCC: 4 | RNVC: 1
H20891: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9
F1FA17472: RNCC: 6 | RNVC: 9
1C9265: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-146-2833
Rotary Rudde Puller

991462833
S6170-10058-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-150-0012
Spanner

991500012
NO PRIMARY REF 99-150-0012: RNCC: 3 | RNVC: 2
EP462-8: RNCC: 5 | RNVC: 9

30 Sep 1993

5120-99-808-4271
Wipe Adjusting Tool

998084271
CSDE-CH-K-GSS-04: RNCC: 3 | RNVC: 2
26CK 1104: RNCC: 6 | RNVC: 9

22 Mar 1996

5120-99-614-7817
Spade

996147817
111405: RNCC: 3 | RNVC: 2
GM-B-120291: RNCC: 5 | RNVC: 2
FK9706W0089: RNCC: 6 | RNVC: 9

4 Feb 1998

5120-99-910-6182
Open End Wrench

999106182
DEF STAN 51-11 (PART 1): RNCC: 4 | RNVC: 1
BS1842-TABLE 1 9 X 11BA: RNCC: 4 | RNVC: 1
TABLE I(C) 9 X 11BA: RNCC: 6 | RNVC: 9
TABLE 1. 9 BA X 11 BA: RNCC: 6 | RNVC: 9
FA17183: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-741-4628
Spanner Wrench

997414628
S-68-4481-01: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-955-4036

5120-99-253-1103
Torque Screwdriver

992531103
015500: RNCC: 3 | RNVC: 1
STD SD: RNCC: 5 | RNVC: 1

8 Feb 2007

5120-99-382-6117
Spanner Wrench

993826117
110079-187: RNCC: 3 | RNVC: 2
26VC-95179: RNCC: 6 | RNVC: 9

6 Feb 2002

5120-99-463-1954
Mechanical Puller

994631954
BSWK15: RNCC: 3 | RNVC: 2
15: RNCC: 5 | RNVC: 2

8 May 1992

5120-99-617-5876
Mechanical Puller

996175876
HU24564: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-469-9644
Spanner

994699644
NO PRIMARY REF 99-469-9644: RNCC: 3 | RNVC: 2
ST350: RNCC: 5 | RNVC: 9
27Q6110: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4270
Socket Wrench Socket

999104270
BS4006: RNCC: 4 | RNVC: 1
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4563: RNCC: 6 | RNVC: 9
FA17578: RNCC: 6 | RNVC: 9
1L75: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-434-7302
Socket Wrench Socket

994347302
BS4006-TABLE 24 2-1/8A/F: RNCC: 4 | RNVC: 1
F1FA17487: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-812-3816
Carburettor Tool

998123816
NO PRIMARY REF 99-812-3816: RNCC: 3 | RNVC: 2
EMT149: RNCC: 5 | RNVC: 2
LV3RREMT149: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-710-4249
Bearing And Bushing Driver

997104249
PE8801: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-660-3357
Socket Head Screw Key

996603357
4KSM14F11: RNCC: 3 | RNVC: 2

8 Jul 1992

5120-99-251-3924
Ta Cranked Adjuster

5120-99-519-6435
Socket Wrench H Bar

5120-99-545-3362
Round N Long Pliers

5120-99-825-7065
Mechanical J Handle

5120-99-407-0070
Turnlock F Stud Key

994070070
A: RNCC: 3 | RNVC: 2
2: RNCC: 5 | RNVC: 2
28FP1328: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-115-9623
Removal Tool

991159623
NO PRIMARY REF 99-115-9623: RNCC: 3 | RNVC: 2
JA6565: RNCC: 5 | RNVC: 2
DAS874145: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-538-7906
Mechanical Puller

995387906
CHA140092/6-407: RNCC: 3 | RNVC: 2
CHA140092-6-407: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-747-5665
Torque Wrench Adapter

997475665
P-891149-405: RNCC: 3 | RNVC: 2
P891149-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-766-2675
Inte Extractor Tool

997662675
EX-2: RNCC: 3 | RNVC: 2

10 Oct 1983

5120-99-833-5067
Flat Ti Screwdriver

5120-99-766-4543

5120-99-835-5823

5120-99-778-7738

5120-99-892-1038
Hand Screw Jack

998921038
332/U3613: RNCC: 3 | RNVC: 2

1 Apr 2009

5120-99-735-2165
Handformer

997352165
FWA 405 SSP: RNCC: 3 | RNVC: 2
3A/5766: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-976-0363
Socket Wrench Socket Set

999760363
213-1027: RNCC: 3 | RNVC: 2
213-1027: RNCC: 5 | RNVC: 2
TT7778725: RNCC: 6 | RNVC: 9

22 Jan 2002

5120-99-397-9131
Mechanical Puller

993979131
P5J 1501557: RNCC: 3 | RNVC: 2
0625P-236: RNCC: 6 | RNVC: 9
062CE-107: RNCC: 6 | RNVC: 9

22 May 2006

5120-99-137-9377
Socket Head Screw Key

991379377
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
74-3-161N: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
H7020: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-9880
Bli Riveter Mandrel

991209880
NO PRIMARY REF 99-120-9880: RNCC: 3 | RNVC: 2
15G11: RNCC: 5 | RNVC: 2
7161-7005: RNCC: 5 | RNVC: 2
1C5846: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-463-9281
Spanner Wrench

994639281
310-118: RNCC: 3 | RNVC: 2
310-118: RNCC: 5 | RNVC: 2

13 Dec 2011

5120-99-243-1864
Torque Tool

992431864
RE2/M5107: RNCC: 3 | RNVC: 2

7 Jul 2000

5120-99-127-6113
Box Wrench

991276113
4207: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-609-5913
Extractor

996095913
NO PRIMARY REF 99-609-5913: RNCC: 3 | RNVC: 2
GU19467-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-212-8212
Extension Assembly

992128212
MT1-83-1335/1: RNCC: 3 | RNVC: 2
MT1-83-1335: RNCC: 5 | RNVC: 1
MT1-83-1335 ITEM 1: RNCC: 5 | RNVC: 2
0528U-062: RNCC: 6 | RNVC: 9
052N4-026: RNCC: 6 | RNVC: 9

5 Jul 2005

5120-99-431-4336

5120-99-812-3866

5120-99-656-1014

5120-99-214-4093
Strain Pi Extractor

5120-99-943-5739
Spanner Wrench

999435739
Y2286333-1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-219-7908
Torque Wrench

992197908
016400: RNCC: 3 | RNVC: 2
QUICKSET 40-80: RNCC: 5 | RNVC: 1
QUICKSET 40-80 MALE: RNCC: 5 | RNVC: 2

4 Oct 1995

5120-99-437-7854
Insertion-Extr Tool

994377854
BL/D 3164: RNCC: 3 | RNVC: 2
43208-588-00-4: RNCC: 5 | RNVC: 2

13 Jul 1994

5120-99-910-6305
Socket Wrench Adapter

999106305
BS4006-TABLE 35: RNCC: 4 | RNVC: 1
H20022: RNCC: 5 | RNVC: 2
H4394: RNCC: 6 | RNVC: 9
1L169: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
BS4006PT1: RNCC: 6 | RNVC: 9
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
TABLE 35 3/8X9/32 A/F FORM B: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-716-4663
Wrench Adaptor

997164663
NO PRIMARY REF 99-716-4663: RNCC: 3 | RNVC: 2
7280-2105: RNCC: 5 | RNVC: 2
7280-2105: RNCC: 5 | RNVC: 2
G28-2-15: RNCC: 5 | RNVC: 9
7280-2105: RNCC: 5 | RNVC: 9
G28-2-15: RNCC: 5 | RNVC: 9
85-688-9991: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-466-0118
Lent Tool

5120-99-120-5659

5120-99-136-9516
Positioner Assembly

5120-99-104-1570

5120-99-681-5866
Piston Ring Expander

996815866
80.861.02660.200: RNCC: 3 | RNVC: 2

9 Feb 2009

5120-99-449-9349

5120-99-432-8874

5120-99-278-3809
Tack Claw

992783809
TL-502-209: RNCC: 3 | RNVC: 2

28 Nov 2007

5120-99-207-8931
Foot Assembly Ball

992078931
NO PRIMARY REF 99-207-8931: RNCC: 3 | RNVC: 2
0EA1380: RNCC: 5 | RNVC: 2
GMB75950: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-617-2702
Socket Wrench

996172702
MBEU-54770: RNCC: 3 | RNVC: 2
B/MBEU-54770: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-428-8955
Anti-Torque Lever

994288955
NO PRIMARY REF 99-428-8955: RNCC: 3 | RNVC: 2
WA9-88-514: RNCC: 5 | RNVC: 9
26DB95028: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-659-5421
Mechanical Puller

996595421
CHA754-122-407: RNCC: 3 | RNVC: 2

2 Sep 1989

5120-99-120-0296
Screwdriver Bit

991200296
BS2559PT5S1ZE2B: RNCC: 2 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 4 | RNVC: 1
BS2559PT5: RNCC: 5 | RNVC: 1
H5693: RNCC: 5 | RNVC: 2
778/1/2: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-616-7337
Hand Riveter Anvil

996167337
J600/2/5M ANVIL: RNCC: 3 | RNVC: 2

16 Jun 1993

5120-99-114-4823
Socket Wrench

991144823
UT837: RNCC: 3 | RNVC: 2
C26-61: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-137-2114
Torque Wrench

991372114
TB12C: RNCC: 3 | RNVC: 2
011100: RNCC: 5 | RNVC: 1
TB12: RNCC: 5 | RNVC: 2
91611307: RNCC: 5 | RNVC: 2
POG017517: RNCC: 5 | RNVC: 2
011100: RNCC: 5 | RNVC: 2
A67630: RNCC: 5 | RNVC: 2
TB12: RNCC: 5 | RNVC: 2
7716974: RNCC: 5 | RNVC: 2
4KSM11F28: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-138-5128
Swaging Tool Ha Die

991385128
NO PRIMARY REF 99-138-5128: RNCC: 3 | RNVC: 2
3002201: RNCC: 5 | RNVC: 2

27 Mar 1979

5120-99-288-6604
Seal Inserter

992886604
EA6305G658-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-108-9853
Torque Wrench

991089853
A120: RNCC: 3 | RNVC: 1
PE15514: RNCC: 5 | RNVC: 1
A120: RNCC: 5 | RNVC: 1
PE15514: RNCC: 5 | RNVC: 1
0624-10AG732: RNCC: 6 | RNVC: 9
1C8153: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-212-2105
Socket Wrench Handle Bar

992122105
T44: RNCC: 3 | RNVC: 2

5 Jul 2000

5120-99-253-1121
Lowe Bush Tool Bar

992531121
70-99-967/1: RNCC: 3 | RNVC: 2

28 Mar 2007

5120-99-634-1479

5120-99-640-0693
Spanner Wrench

996400693
CH65650: RNCC: 3 | RNVC: 2
67A95: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-148-0867
Pin Remover

991480867
LOT84139: RNCC: 3 | RNVC: 2

16 Dec 2008

5120-99-122-5163
Socket Wrench Socket

991225163
KSMD11: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-628-8890
Spanner Wrench

5120-99-445-4311

5120-99-610-2594

5120-99-423-8205
Socket Wrench

994238205
9028-24: RNCC: 3 | RNVC: 2
558041: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-122-3689
Flat Tip Screwdriver

991223689
C1AA350-3-161N: RNCC: 3 | RNVC: 2
UUA2046: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-782-1100
Open End Wrench

997821100
0W5: RNCC: 3 | RNVC: 2
H02347: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-130-7693
Seconda Bottom Tool

991307693
70015/17/3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-553-8177
Hand Hammer

995538177
BS876: RNCC: 4 | RNVC: 1
METS/16/01/01: RNCC: 5 | RNVC: 1

4 Feb 2013

5120-99-133-7338
Thre Anchor-Adaptor

991337338
A0/1010/2BA-D: RNCC: 3 | RNVC: 2
GSIPTGAMC6AB190406TURNEX: RNCC: 6 | RNVC: 9

6 Jun 2006

5120-99-661-1979
Seal Inserter

996611979
4A41-W8-123: RNCC: 3 | RNVC: 2
4A41W8-123: RNCC: 5 | RNVC: 2

6 Jan 1995

5120-99-836-0502

5120-99-836-0515

5120-99-794-8814

5120-99-235-4765
Release Tool

992354765
6880-5232: RNCC: 3 | RNVC: 2
M991012: RNCC: 5 | RNVC: 2

5 Nov 2003

5120-99-825-8272

5120-99-434-7296
Socket Wrench

994347296
BS2558-TABLE 2 5/32X13/64A/F: RNCC: 4 | RNVC: 1
F1FA17170: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-258-1646
Torque Wrench

992581646
3310494: RNCC: 3 | RNVC: 2
016200: RNCC: 5 | RNVC: 2
016200: RNCC: 5 | RNVC: 2
XP98PC01387: RNCC: 6 | RNVC: 9

2 Apr 1998

5120-99-552-0044
Ratchet Wheel

995520044
NO PRIMARY REF 99-552-0044: RNCC: 3 | RNVC: 2
16-8083: RNCC: 5 | RNVC: 2
16-83: RNCC: 5 | RNVC: 2
210-150496: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-308-1756
Support Pole

993081756
NO PRIMARY REF 99-308-1756: RNCC: 3 | RNVC: 2
TP2150: RNCC: 5 | RNVC: 2
678-001756: RNCC: 6 | RNVC: 9
H678-081756: RNCC: 6 | RNVC: 9
W20TP2150: RNCC: 6 | RNVC: 9
678-081756: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-525-5579
Spanner Wrench

995255579
85-119-19-10-1005: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-746-7829
Lynx Gearbox Tool

997467829
WG1368-0001-013W108: RNCC: 3 | RNVC: 2

30 Nov 1990

5120-99-607-7568

5120-99-468-8433

5120-99-120-4782
Flat Ti Screwdriver

991204782
NO PRIMARY REF 99-120-4782: RNCC: 3 | RNVC: 2
B32: RNCC: 5 | RNVC: 2
1H120: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-083-1835
Socket Wrench Attac

5120-99-401-3450
Clutch Spanner Box

5120-99-402-0410

5120-99-083-3871
Spr Tensioning Tool

5120-99-833-4829
Mechanical Puller

998334829
TE938: RNCC: 3 | RNVC: 2
032PR-001: RNCC: 6 | RNVC: 9

22 Jul 2003

5120-99-786-8722
Bent Valve Lifter

997868722
C.200066/1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-159-1747
Spanner Wrench

991591747
9535.W627: RNCC: 3 | RNVC: 2
9535.W627: RNCC: 5 | RNVC: 2

28 Nov 2005

5120-99-408-3012
Bit Bristol

994083012
NO PRIMARY REF 99-408-3012: RNCC: 3 | RNVC: 2
SSB-56SSB56: RNCC: 5 | RNVC: 2
0938-LLX001046: RNCC: 6 | RNVC: 9

13 Jul 2001

5120-99-965-8078
Flat Tip Screwdriver

999658078
NMT-119: RNCC: 3 | RNVC: 2

3 Dec 1998

5120-99-124-2464
Torque Wrench

991242464
76-54: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT32: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-547-9535
Machinist's Vise

995479535
NO PRIMARY REF 99-547-9535: RNCC: 3 | RNVC: 2
545-525: RNCC: 5 | RNVC: 2

26 Mar 2001

5120-99-801-3988
Extraction Tool

998013988
NO PRIMARY REF 99-801-3988: RNCC: 3 | RNVC: 2
AT2016: RNCC: 5 | RNVC: 2
AT2016: RNCC: 6 | RNVC: 9
AT2016: RNCC: 6 | RNVC: 9
A887-88-8874220: RNCC: 6 | RNVC: 9

27 Jun 2002

5120-99-462-2765

5120-99-527-0491

5120-99-469-9751

5120-99-461-8406
Gauge

5120-99-307-1662
Bearing And Driver

5120-99-405-5811
Mechanical Puller Kit

994055811
81590: RNCC: 3 | RNVC: 2
317-00084: RNCC: 5 | RNVC: 2
317-50003: RNCC: 5 | RNVC: 2
560-243649: RNCC: 6 | RNVC: 9
X3XCLR317-84: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-682-6932
Spanner Wrench

996826932
R054-0785: RNCC: 3 | RNVC: 2
R054-0785-PCD: RNCC: 5 | RNVC: 2

11 Jan 2012

5120-99-799-2619
Torque Wrench

997992619
CDS 400: RNCC: 3 | RNVC: 2
DEF STAN 51-11 PART 32: RNCC: 4 | RNVC: 1
TABLE I(D): RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-826-4344
Socket Hexagon Bit

998264344
7244-252: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-348-5067
Guide Tool Assembly

993485067
FV2270696: RNCC: 3 | RNVC: 2

19 Aug 2005

5120-99-422-4579
Spanner Wrench

994224579
N37269-1: RNCC: 3 | RNVC: 2
88604-606-008: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-120-8403
Socket Wrench Socket

991208403
BS4006-TABLE 7 8BA: RNCC: 4 | RNVC: 1
DH152: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
TABLE I(F) 8BA: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H6285: RNCC: 6 | RNVC: 9
851633: RNCC: 6 | RNVC: 9
1L18: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-617-1871
Mechanical Puller

996171871
HU17935: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-215-1054
Socket Head Screw Key

992151054
ST510001: RNCC: 3 | RNVC: 2

13 Jun 2000

5120-99-460-4057
Mandrel

994604057
PE51685: RNCC: 3 | RNVC: 2
64DE1015: RNCC: 6 | RNVC: 9
64DE1015: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-665-4267
Torque Wrench

996654267
NO PRIMARY REF 99-665-4267: RNCC: 3 | RNVC: 2
TS797: RNCC: 5 | RNVC: 2
012SY-108: RNCC: 6 | RNVC: 9

7 Nov 2001

5120-99-797-6788
Seal Guide

997976788
CH748-499: RNCC: 3 | RNVC: 2
CHA748-499: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-607-3562
Socket Wrench Crowfoot Attachment

996073562
S3S20305000: RNCC: 3 | RNVC: 2
7M123CC: RNCC: 5 | RNVC: 2
HU17751: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-580-5260
Screw Thread Insert Tang Breakoff Tool

995805260
1196-06: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-152-5393
Hand Hydraulic Jack

991525393
SJ5: RNCC: 3 | RNVC: 2
SJ5T: RNCC: 5 | RNVC: 2
70-99-501: RNCC: 5 | RNVC: 2
SAE SJ5: RNCC: 5 | RNVC: 2
031YQ-010: RNCC: 6 | RNVC: 9

30 May 2003

5120-99-361-7413
Locator

993617413
531756.0001: RNCC: 3 | RNVC: 2
531-756: RNCC: 5 | RNVC: 2
3603-200-22-02: RNCC: 5 | RNVC: 2

15 Feb 1994

5120-99-412-5348
Thre Anchor-Adaptor

994125348
A0/1000/2BA: RNCC: 3 | RNVC: 2
GSIPTGAMC6AB190406TURNEX: RNCC: 6 | RNVC: 9

7 Jun 2006

5120-99-449-0179
Socket Span Adaptor

994490179
NO PRIMARY REF 99-449-0179: RNCC: 3 | RNVC: 2
2063: RNCC: 5 | RNVC: 9
851684: RNCC: 6 | RNVC: 9

27 Oct 1987

5120-99-571-3377
Hand Terminal Crimping Tool

995713377
YNT-2216: RNCC: 3 | RNVC: 2

11 Mar 2010

5120-99-411-9028
Sleeve

994119028
NO PRIMARY REF 99-411-9028: RNCC: 3 | RNVC: 2
ST1922: RNCC: 5 | RNVC: 9
27Q13489: RNCC: 6 | RNVC: 9

24 Oct 1979

5120-99-715-9924
Wrench Spanner

997159924
ST38674: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-949-9964
Socket Wrench Extension

999499964
S3S18343000: RNCC: 3 | RNVC: 2
S3S18343000: RNCC: 5 | RNVC: 2

7 Jun 1993

5120-99-925-8352
Socket Wrench Socket

999258352
550024: RNCC: 3 | RNVC: 2

11 Nov 2010

5120-99-658-4992
Assembly Tool

996584992
AT2/11: RNCC: 3 | RNVC: 2

20 Jan 1981

5120-99-781-6850

5120-99-459-0746

5120-99-546-1670
Socket Wrenc Handle

5120-99-779-4248
Torque Wren Adapter

5120-99-666-4448
Ball Bearing E Tool

996664448
EA6705G565-043: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-402-2105
Box Wrench

994022105
16687: RNCC: 3 | RNVC: 2
678/1/45412/000: RNCC: 5 | RNVC: 2
MWPROD1: RNCC: 6 | RNVC: 9

12 Aug 2005

5120-99-130-2383
Socket Wrench Socket

991302383
BELZER6700DM10MM: RNCC: 3 | RNVC: 2
DEF STAN 51-11 (PART 4): RNCC: 4 | RNVC: 1
BS4006-TABLE 4 10MM: RNCC: 4 | RNVC: 1
6700DM10MM: RNCC: 5 | RNVC: 2
DEFSTAN51-11PT4: RNCC: 6 | RNVC: 9
TABLE I(B) 10MM: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9
1L582: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-192-9834
Open End Wrench

991929834
2J6268: RNCC: 3 | RNVC: 2
BKB504566-2: RNCC: 5 | RNVC: 2
547-463205: RNCC: 6 | RNVC: 9
H547-463205: RNCC: 6 | RNVC: 9
BS192: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-436-2173
Torque Device

994362173
NO PRIMARY REF 99-436-2173: RNCC: 3 | RNVC: 2
A3398/2: RNCC: 5 | RNVC: 9
26CK-1213: RNCC: 6 | RNVC: 9

8 Jul 2002

5120-99-954-3009
Con Extraction Tool

999543009
NO PRIMARY REF 99-954-3009: RNCC: 3 | RNVC: 2
558-1-00599: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-433-2170
Torque Wrench

994332170
6121NMF: RNCC: 3 | RNVC: 2
264-2218: RNCC: 5 | RNVC: 2
264-2218: RNCC: 5 | RNVC: 2

15 Jul 2005

5120-99-631-2636
Torque Wrench

996312636
827097: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-808-2428
Socket Wrench

998082428
FV679757: RNCC: 3 | RNVC: 2
1-30-0005: RNCC: 6 | RNVC: 9
0092010: RNCC: 6 | RNVC: 9
P92010: RNCC: 6 | RNVC: 9
SEW1-28MM: RNCC: 6 | RNVC: 9
P000092010: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-742-3230
Leveling-Support Jack

997423230
183-767: RNCC: 3 | RNVC: 2
37380: RNCC: 5 | RNVC: 2
P37380: RNCC: 5 | RNVC: 2

21 Sep 2005

5120-99-411-0695
Open End Wrench

994110695
1069A: RNCC: 3 | RNVC: 2
TA1039: RNCC: 5 | RNVC: 2
5180-99N02-7095: RNCC: 6 | RNVC: 9
5815-99N31-2894: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-355-4331
Cartridge Extractor

993554331
MBEU185540: RNCC: 3 | RNVC: 2

24 Mar 2004

5120-99-130-0061
Socket Wrench Socket

991300061
HLW 204: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-302-8114
Blacksmith's Anvil

993028114
S001-101: RNCC: 3 | RNVC: 2
SA00000106: RNCC: 5 | RNVC: 2

4 Mar 2008

5120-99-946-2015

5120-99-129-4739

5120-99-720-5241
Mount And Remove To

997205241
00834010: RNCC: 3 | RNVC: 2

13 Aug 1999

5120-99-428-7637

5120-99-401-3541

5120-99-522-3542
Spanner Wrench

5120-99-425-6810

5120-99-425-6812

5120-99-402-0041

5120-99-782-9815
H Contact Burnisher

5120-99-808-3712
Coupling Extractor

998083712
NO PRIMARY REF 99-808-3712: RNCC: 3 | RNVC: 2
7044-8: RNCC: 5 | RNVC: 2
7044-8: RNCC: 5 | RNVC: 2
LV6MT12CB7044-8: RNCC: 6 | RNVC: 9
16C3397: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-454-0877
Special Line Plug

994540877
17229211-0: RNCC: 3 | RNVC: 2
17229211-0: RNCC: 5 | RNVC: 2
021JB-014: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-433-4553
Socket Wrench Handle Bar

994334553
140-10-2: RNCC: 3 | RNVC: 2
140-10-2: RNCC: 5 | RNVC: 2
0276-190567: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-513-8344
Socket Wrench

995138344
558/1/05740: RNCC: 3 | RNVC: 2
754/1/33724/001: RNCC: 5 | RNVC: 2

10 Mar 1995

5120-99-559-0078
Wrench Spanner

995590078
5-79-16X: RNCC: 3 | RNVC: 2
H718-226723: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-175-4955
Screwdriver Bit

991754955
IB4: RNCC: 3 | RNVC: 2
312-AT-816: RNCC: 5 | RNVC: 2
312-AT-816-1: RNCC: 5 | RNVC: 2

8 Jan 2010

5120-99-310-0573
Torque Wrench Adapter

993100573
460005675: RNCC: 3 | RNVC: 2
100405-9001-336: RNCC: 5 | RNVC: 2
UW231B1: RNCC: 6 | RNVC: 9

27 Jan 1993

5120-99-468-8381
Hook Spanner

994688381
RS181-16: RNCC: 3 | RNVC: 2
27Y2374: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-798-3609
Socket Head Screw Key

997983609
MX/01704/SL/004: RNCC: 3 | RNVC: 2
004469411: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-773-1139
Plier Wrench

997731139
7: RNCC: 3 | RNVC: 2
21-3150-6: RNCC: 5 | RNVC: 2
H21822: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-799-5959
Mechanical Puller

997995959
200886202.AFT.4: RNCC: 3 | RNVC: 2
200886202.AFT.4: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-608-7859
Socket Wrench

996087859
UT.477: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-537-1066
Jaw Cable Grip

995371066
002522358: RNCC: 3 | RNVC: 1

25 Apr 1991

5120-99-617-9591
Torque Wren Adaptor

996179591
A0121916: RNCC: 3 | RNVC: 2
A0121916: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-710-3866
Drive Pin Punch

997103866
PE8483: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-829-9103
Tyre Lever

998299103
NO PRIMARY REF 99-829-9103: RNCC: 3 | RNVC: 2
TL/100: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-432-1046
Piston Band Trigger

994321046
NO PRIMARY REF 99-432-1046: RNCC: 3 | RNVC: 2
RPH70632: RNCC: 5 | RNVC: 2
E6FQ000252: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-732-0382
Ratchet Wrench

997320382
H325-944771: RNCC: 3 | RNVC: 2
NO27/16INAFSQUARE FEMALE: RNCC: 5 | RNVC: 2
LE462D3: RNCC: 6 | RNVC: 9
LE463B1: RNCC: 6 | RNVC: 9
N001-944771: RNCC: 6 | RNVC: 9
N001-944771: RNCC: 6 | RNVC: 9
H325-944771: RNCC: 6 | RNVC: 9

9 May 1996

5120-99-910-7896
Hand Rivet Set

999107896
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2397: RNCC: 6 | RNVC: 9
H2397: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-803-0209
Medium Type Clamp

998030209
NO PRIMARY REF 99-803-0209: RNCC: 3 | RNVC: 2
LV6MT2-19806: RNCC: 5 | RNVC: 2

25 Apr 1977

5120-99-803-0212
Socket Wrench Handle Bar

998030212
NO PRIMARY REF 99-803-0212: RNCC: 3 | RNVC: 2
LV6MT2-21644: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-664-9934
Ratchet

996649934
NO PRIMARY REF 99-664-9934: RNCC: 3 | RNVC: 2
NO.339: RNCC: 5 | RNVC: 2
0110J-035: RNCC: 6 | RNVC: 9

3 May 2001

5120-99-757-4936
Thre Anchor-Adaptor

997574936
A0/1010/M5D: RNCC: 3 | RNVC: 2
NPPOGAMA4B2060405: RNCC: 6 | RNVC: 9

5 Jul 2005

5120-99-466-5474
Bod Holder Assembly

994665474
NO PRIMARY REF 99-466-5474: RNCC: 3 | RNVC: 2
558-1-00246: RNCC: 5 | RNVC: 2
1H356: RNCC: 6 | RNVC: 9

18 Jan 1977

5120-99-666-8299
Felling Wedge

996668299
988-070-001: RNCC: 3 | RNVC: 2

7 Mar 2007

5120-99-125-5537

5120-99-655-3686
Drift

996553686
CH755-044-403: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-459-0790
Spanner

5120-99-545-3351
Socket Wrenc Socket

5120-99-513-4019

5120-99-471-0392

5120-99-465-8654
Mechanical Puller

5120-99-434-1470

5120-99-471-0396

5120-99-465-8824

5120-99-545-3357
Open End Wrench

5120-99-468-5085

5120-99-933-3817

5120-99-453-7366
Piece

5120-99-456-5777

5120-99-453-7386
Adaptor

5120-99-608-3968
Torque Handle

996083968
13021: RNCC: 3 | RNVC: 2

16 Apr 2002

5120-99-144-6040
Retra Assembly Tool

991446040
460002197: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-139-7062
Socket Head Screw Key

991397062
ALLEN KEY 5/16 IN HEX AF: RNCC: 3 | RNVC: 2
BS2470: RNCC: 5 | RNVC: 1

25 Apr 1991

5120-99-580-5418
Coil Thread Nozzle

995805418
A32-11: RNCC: 3 | RNVC: 2
DEFSTAN51-7: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-225-4672
Pliers

992254672
CSDE/19240/6/13/GSS/FIG3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-484-3306
Inspe Mirror Handle

994843306
SE000200: RNCC: 3 | RNVC: 2
C-TIM-ILL: RNCC: 5 | RNVC: 2

8 Apr 2002

5120-99-910-6372
Socket Wrench Socket

999106372
DEF STAN 51-11 PART 4: RNCC: 4 | RNVC: 1
BS4006-TABLE 17 1A/F: RNCC: 4 | RNVC: 1
FA17464: RNCC: 6 | RNVC: 9
TABLE I(D) 1A/F: RNCC: 6 | RNVC: 9
BS4006: RNCC: 6 | RNVC: 9
FA17464: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-350-4198
Flat Tip-Cross Tip Screwdriver

993504198
DC/CPS/6305 TABLE 4 ITEM 43: RNCC: 2 | RNVC: 2

15 Jan 2008

5120-99-780-1796
Torque Wrench

997801796
QUICKSET MINOR F/HEX: RNCC: 3 | RNVC: 2
016040: RNCC: 5 | RNVC: 2
H22884: RNCC: 5 | RNVC: 2
H24208: RNCC: 5 | RNVC: 2
6880-5283: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-5546
Contact Remova Tool

991365546
NO PRIMARY REF 99-136-5546: RNCC: 3 | RNVC: 2
SS04-1: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-757-5689
C Installer Remover

997575689
21-013A: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-449-9336

5120-99-449-9376

5120-99-836-4229
Ic Extractor

998364229
41369-071-00-0: RNCC: 3 | RNVC: 2

8 Mar 2005

5120-99-446-3052

5120-99-803-0203
Wheel Hub Extractor

998030203
NO PRIMARY REF 99-803-0203: RNCC: 3 | RNVC: 2
LV6MT2-19154: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-434-7161

5120-99-341-1324
Open End Wrench

993411324
697/1/04049/000: RNCC: 3 | RNVC: 2
697/7/04049/000: RNCC: 5 | RNVC: 2
UW214C: RNCC: 6 | RNVC: 9

10 Mar 1998

5120-99-856-3850
Spanner Wrench

998563850
G816/4969/1: RNCC: 3 | RNVC: 2
G816/4969 ITEM 1: RNCC: 5 | RNVC: 2

21 Jan 2003

5120-99-122-2576
Extract Drill Guide

991222576
RTJ0P312: RNCC: 3 | RNVC: 2
7994-0128: RNCC: 5 | RNVC: 2
7994-0128: RNCC: 5 | RNVC: 2
7994-0128: RNCC: 5 | RNVC: 9
RTJ0P312: RNCC: 5 | RNVC: 9
1C8088: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-723-9985
Retaining Ring Pliers

997239985
OD31902/07: RNCC: 3 | RNVC: 2

19 Sep 2002

5120-99-439-4467
Blacksmith's Bottom Swage

994394467
NO PRIMARY REF 99-439-4467: RNCC: 3 | RNVC: 2
H2679: RNCC: 5 | RNVC: 2
F1FA17917: RNCC: 5 | RNVC: 2
2203: RNCC: 6 | RNVC: 9
2203A BOTTOM: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-137-0942
Crimping To Locater

991370942
MS3191-20A: RNCC: 3 | RNVC: 2
MS3191-20A: RNCC: 3 | RNVC: 2

23 Sep 1982

5120-99-752-4283
Swage

5120-99-785-9431

5120-99-763-8446

5120-99-762-6971

5120-99-037-0673
Spanner Wrench

990370673
T7165: RNCC: 3 | RNVC: 2

16 Apr 1997

5120-99-256-1453
Torque Wrench

5120-99-593-2991
Socket Wrench Socket

995932991
NM50A: RNCC: 3 | RNVC: 2

17 May 2006

5120-99-734-6879
Bearing And Bushing Driver

997346879
460009510-D: RNCC: 3 | RNVC: 2
460009510D: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-901-4197
Wire Holder

999014197
HC1737: RNCC: 3 | RNVC: 2
300565-A2: RNCC: 5 | RNVC: 2
300859-B: RNCC: 5 | RNVC: 2
200393-7: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-797-4137
Socket Head Screw Key

997974137
703-18-3-12204/1: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-306-3819
Open End Wrench

993063819
SST/Y/581/00/0307/103: RNCC: 3 | RNVC: 2
001293839: RNCC: 5 | RNVC: 1
001293839 PART 103: RNCC: 5 | RNVC: 2
SST/Y/581/00/0307/000 PART 103: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-252-5079
Box Wrench

992525079
XS1012: RNCC: 3 | RNVC: 2
1C/8684: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-745-4157
Disc Remo Drive Arm

997454157
00832/DT/035943: RNCC: 3 | RNVC: 2
00832/AS/035944 ITEM 4: RNCC: 5 | RNVC: 2
00832/AS/035944/4: RNCC: 5 | RNVC: 2

26 Aug 2000

5120-99-869-2217
Ratchet Wrench

998692217
D/DGES(A)/133/01/02: RNCC: 4 | RNVC: 1
SIZE 7 X 8MM A/F: RNCC: 6 | RNVC: 9
TEJ6003: RNCC: 6 | RNVC: 9

14 Sep 1994

5120-99-651-5626
Socket Head Screw Key

996515626
560-1.5MM A/F: RNCC: 3 | RNVC: 2
920582: RNCC: 5 | RNVC: 2
KPS102B103: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-179-8429
Special Spanner

991798429
P-892183-405: RNCC: 3 | RNVC: 2
P892183-405: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-99-552-2849
Socket Wrench Socket

995522849
GHM36: RNCC: 3 | RNVC: 2
181484C: RNCC: 5 | RNVC: 2
0D28371-05: RNCC: 5 | RNVC: 2
BS4006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-0958
Retaining Ring Pliers

991240958
M1N1TYPE1400-6MM: RNCC: 3 | RNVC: 2
AP29627: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-437-5864
Drive Pin Punch

994375864
MCD33548PAT1991: RNCC: 3 | RNVC: 2
0275-1991: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-622-7674
Socket Head Screw Key

996227674
460001006: RNCC: 3 | RNVC: 2
80-08-80-2347: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-402-0054
Drip Tray

994020054
FV378436: RNCC: 3 | RNVC: 2
16C4021: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-465-8090
Armourers Drift

994658090
NO PRIMARY REF 99-465-8090: RNCC: 3 | RNVC: 2
AD10659-5: RNCC: 5 | RNVC: 2
1E5123: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-647-2832

5120-99-401-9673

5120-99-910-5534
Pliers

999105534
UKD1SPR0V48: RNCC: 4 | RNVC: 1
H20313: RNCC: 5 | RNVC: 2
640-4-14096: RNCC: 6 | RNVC: 9
FA19425: RNCC: 6 | RNVC: 9
1B2969: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-543-3128
Contact Positioner

995433128
M22520-2-06: RNCC: 3 | RNVC: 2

18 May 1987

5120-99-136-2694
Flat Tip Screwdriver

991362694
A642890: RNCC: 3 | RNVC: 2
558/1/01772: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-122-5133
Socket Wrench Handle

991225133
KSF710: RNCC: 3 | RNVC: 2
1225133: RNCC: 3 | RNVC: 2
1700057: RNCC: 5 | RNVC: 2
T2EL1489: RNCC: 5 | RNVC: 2
1L521: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-750-2447
Spanner Wrench

997502447
290-025980-0: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-542-9240
Spring Compression

995429240
317-91: RNCC: 3 | RNVC: 2
SK201-42: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-136-2583
Socket Wrench

991362583
56978-0042: RNCC: 3 | RNVC: 2
56978-0042: RNCC: 5 | RNVC: 2
P11543: RNCC: 6 | RNVC: 9
363-136-2583: RNCC: 6 | RNVC: 9
070-363182: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-558-8331
Open End Wrench

995588331
95406 ITEM 11: RNCC: 3 | RNVC: 2
95406-11: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-432-6861
Splicing Kit

994326861
E4/MFR/SPLK: RNCC: 3 | RNVC: 2
MFR/SPLK: RNCC: 5 | RNVC: 2

5 Jan 1996

5120-99-350-5374
Torque Wrench

993505374
QC1P300-125 IN.LB: RNCC: 3 | RNVC: 2
UWS4B: RNCC: 6 | RNVC: 9

4 Mar 2004

5120-99-446-7193
Tommy Bar

994467193
NO PRIMARY REF 99-446-7193: RNCC: 3 | RNVC: 2
UL6107: RNCC: 5 | RNVC: 2
88634-614-943: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-481-9537
Socket Wrench Set

994819537
NO PRIMARY REF 99-481-9537: RNCC: 3 | RNVC: 2
302-041880: RNCC: 5 | RNVC: 2
537-748: RNCC: 5 | RNVC: 2

28 Jul 2003

5120-99-361-6288
Spanner Wrench

993616288
SGE 1090-003: RNCC: 3 | RNVC: 2
051R6-003: RNCC: 6 | RNVC: 9

20 May 2005

5120-99-659-6934
Spring Inserter And Remover

996596934
48585 A29/405: RNCC: 3 | RNVC: 2
48585A29-405: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-199-5333
Pistol Tool

991995333
AMD7370-133D: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-548-6795
Cage And Locknut Ke

995486795
303415C: RNCC: 3 | RNVC: 2
B574C: RNCC: 5 | RNVC: 1
H184-196975: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-828-4211
T Spring Compressor

998284211
NO PRIMARY REF 99-828-4211: RNCC: 3 | RNVC: 2
1H7391: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-825-7399
Mechanical Puller

998257399
NO PRIMARY REF 99-825-7399: RNCC: 3 | RNVC: 2
Z8523: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-818-0735
Spanner Wrench

998180735
452-65222-000: RNCC: 3 | RNVC: 2
FV2206161: RNCC: 5 | RNVC: 2
DS/N/1041: RNCC: 7 | RNVC: 1

19 Aug 1997

5120-99-208-2586
Open End Wrench

992082586
GMB59414: RNCC: 3 | RNVC: 2
T300311: RNCC: 5 | RNVC: 2
GM-B59414: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-774-1650
Automatic Center Punch

997741650
E171: RNCC: 3 | RNVC: 2
171: RNCC: 5 | RNVC: 2
65-171R: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-7909

5120-99-120-7913

5120-99-120-9883

5120-99-300-3532
Torque Setting Gear

993003532
88/02/3: RNCC: 3 | RNVC: 2

13 Aug 1991

5120-99-213-2608
Rotor Support Assem

992132608
M-98-47-002: RNCC: 3 | RNVC: 2

27 Jan 2009

5120-99-910-6179
Open End Wrench

999106179
DEF STAN 51-11 (PART 1): RNCC: 4 | RNVC: 1
BS1842-TABLE 1 4 X 6BA: RNCC: 4 | RNVC: 1
H5032: RNCC: 5 | RNVC: 2
H20009: RNCC: 5 | RNVC: 2
TABLE I(C) 4 X 6BA: RNCC: 6 | RNVC: 9
TABLE 1. 4 BA X 6 BA: RNCC: 6 | RNVC: 9
FA17180: RNCC: 6 | RNVC: 9
1L29: RNCC: 6 | RNVC: 9
5J1924: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-555-2750
Single Clut Locator

995552750
FT-7102: RNCC: 3 | RNVC: 2
982S40023: RNCC: 6 | RNVC: 9

14 Jun 1999

5120-99-910-5988
Socket Wrench

999105988
BS2558-TABLE 2 1-5/16X1-1/2A/F: RNCC: 4 | RNVC: 1
DEF STAN 51-11 PART 3: RNCC: 4 | RNVC: 1
P997950: RNCC: 5 | RNVC: 2
BS2558: RNCC: 6 | RNVC: 9
TABLE I(D) 1-5/16X1-1/2A/F: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-920-4049
Combination Box And Open End Wrench

999204049
NO PRIMARY REF 99-920-4049: RNCC: 3 | RNVC: 2
495-3475: RNCC: 5 | RNVC: 2
WC1187: RNCC: 5 | RNVC: 2
NSA038-319: RNCC: 5 | RNVC: 2
SPCISR/10/2/43/5/1: RNCC: 6 | RNVC: 9
060W5-0069: RNCC: 6 | RNVC: 9

15 Mar 2006

5120-99-448-4266
Gland Nut Spanner

994484266
NO PRIMARY REF 99-448-4266: RNCC: 3 | RNVC: 2
UL8119: RNCC: 5 | RNVC: 2
88633-616-745: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-6338
Socket Wrench Handle

999106338
BS4006-TABLE 27 12.50MM: RNCC: 4 | RNVC: 1
H4436: RNCC: 6 | RNVC: 9
FA: RNCC: 6 | RNVC: 9
0277: RNCC: 6 | RNVC: 9
1L53: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-549-7341
Screwdriver Bit

995497341
277 837: RNCC: 3 | RNVC: 2
277-837: RNCC: 5 | RNVC: 2
277 837: RNCC: 5 | RNVC: 2
277-837: RNCC: 5 | RNVC: 2

14 May 1992

5120-99-923-9941
Ratchet Screwdriver

999239941
133H: RNCC: 3 | RNVC: 2
0276-13261: RNCC: 6 | RNVC: 9
0276-923-9941: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-810-4025
Spanner Wrench

998104025
BB 60903/008: RNCC: 3 | RNVC: 2

6 Mar 1995

5120-99-724-2212
Fuel Connector Tool

997242212
70-99-556: RNCC: 3 | RNVC: 2
246: RNCC: 5 | RNVC: 2
031X0-006: RNCC: 6 | RNVC: 9

27 May 2003

5120-99-454-1928

5120-99-454-7606
Spanner

5120-99-317-5419
Spanner Wrench

993175419
320000: RNCC: 3 | RNVC: 2

24 Nov 2011

5120-99-764-0405
Plate Storage

997640405
P-891159-009: RNCC: 3 | RNVC: 2
P891159-009: RNCC: 5 | RNVC: 2

2 Sep 1989

5120-99-556-4274
Socket Wrench Handle

995564274
32844-401: RNCC: 3 | RNVC: 2
32844-401-2: RNCC: 5 | RNVC: 2
44632: RNCC: 5 | RNVC: 2
H474-993286: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-471-1859
Extension Bar Assem

994711859
P-892414-401: RNCC: 3 | RNVC: 2
P892414-401: RNCC: 5 | RNVC: 2

18 Jan 2001

5120-99-655-3655
Socket Wrench Crowfoot Attachment

996553655
P-890506-405: RNCC: 3 | RNVC: 2
P890506-405: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-630-6108
Elec Alignment Tool

996306108
NO PRIMARY REF 99-630-6108: RNCC: 3 | RNVC: 2
SDA252193: RNCC: 5 | RNVC: 2
558-9-06311-000: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-709-0044
Dowel Extractor

997090044
S14-94-0400 51/1: RNCC: 3 | RNVC: 2

6 Apr 1994

5120-99-910-6349
Socket Wrench Socket

999106349
BS4006 TABLE 7: RNCC: 4 | RNVC: 1
H20176: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
1L182: RNCC: 6 | RNVC: 9
H4576: RNCC: 6 | RNVC: 9
FA17565: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-547-4316
Torque Wrench

995474316
A5663/1: RNCC: 3 | RNVC: 2
3073-9000-097: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-241-6266
Socket Wrench Socket

992416266
331/33695: RNCC: 3 | RNVC: 2

31 Mar 2003

5120-99-127-6140
Socket Wrench

991276140
11-6266-16: RNCC: 3 | RNVC: 2
H21218: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-465-1922
Stone

994651922
NO PRIMARY REF 99-465-1922: RNCC: 3 | RNVC: 2
W4WX2226: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-510-3907
Flat Tip Screwdriver

995103907
NO PRIMARY REF 99-510-3907: RNCC: 3 | RNVC: 2
459-4060: RNCC: 5 | RNVC: 2
459-4060: RNCC: 5 | RNVC: 2

19 Jul 2005

5120-99-500-9937
Socket Wrench Screwdriver Attachment

995009937
TWM-FRA5414: RNCC: 3 | RNVC: 2
CV177480: RNCC: 5 | RNVC: 2

24 Mar 2011

5120-99-467-6813
Assembly Post

994676813
NO PRIMARY REF 99-467-6813: RNCC: 3 | RNVC: 2
ST1740: RNCC: 5 | RNVC: 9
27Q13857: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-5639
Grommet Inserting Punch And Die

999105639
C00RDPATH2006: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
F1FA15949: RNCC: 6 | RNVC: 9
1B1885: RNCC: 6 | RNVC: 9
DL9A: RNCC: 6 | RNVC: 9
DL9A-H2006: RNCC: 6 | RNVC: 9
H2006: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-559-2890
Wrench Spanner

995592890
180SD531TEM384: RNCC: 3 | RNVC: 2
180SD53-384: RNCC: 5 | RNVC: 2
3532: RNCC: 5 | RNVC: 2
931-188480: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-539-4655
Box Wrench

995394655
X99-7217: RNCC: 3 | RNVC: 2
99-7217: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-471-3892
Spanner Wrench

994713892
UOS/MOD/460/01: RNCC: 3 | RNVC: 2

18 Jul 2006

5120-99-616-7699
Filter Cap Wrench

996167699
WD0388-00362-101: RNCC: 3 | RNVC: 2

7 Jun 1996

5120-99-127-8500

5120-99-726-0833
Oil Seal Protector

5120-99-740-2939
Spring Comp Adaptor

5120-99-146-2920
Bearin Removal Tool

991462920
S6170-35404-2: RNCC: 3 | RNVC: 2

11 Jun 1979

5120-99-910-4408
C Clamp

999104408
H501: RNCC: 2 | RNVC: 2
121/4: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 28: RNCC: 4 | RNVC: 1
H20639: RNCC: 5 | RNVC: 2
01-0488-8: RNCC: 5 | RNVC: 2
DL9A: RNCC: 6 | RNVC: 9
H501: RNCC: 6 | RNVC: 9
F1FA11380: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-760-0869
Pin Inserter

997600869
P-891168-403: RNCC: 3 | RNVC: 2
BM-P-891168-403: RNCC: 5 | RNVC: 2
P891168-403: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-465-8701
Locator

994658701
7005428: RNCC: 3 | RNVC: 2
1H471: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-449-6436
M Puller Attachment

5120-99-811-1556
Attachment Spanner

998111556
905.015.008.1: RNCC: 3 | RNVC: 2
905.015.008.1: RNCC: 5 | RNVC: 2
FH970AB0018: RNCC: 6 | RNVC: 9

22 Sep 1997

5120-99-795-5351
Mechanical Puller

997955351
CH754-517-407: RNCC: 3 | RNVC: 2

14 Sep 1989

5120-99-668-7828
Pliers

996687828
NO PRIMARY REF 99-668-7828: RNCC: 3 | RNVC: 2
35376: RNCC: 5 | RNVC: 2
69286: RNCC: 6 | RNVC: 9
030WT-096: RNCC: 6 | RNVC: 9

19 Mar 2003

5120-99-420-6003
Socket Spanner Atta

996018303
EA6205G026-101: RNCC: 3 | RNVC: 2

9 Jan 2002

5120-99-943-3248
Elec Alignment Tool

999433248
NO PRIMARY REF 99-943-3248: RNCC: 3 | RNVC: 2
B72625: RNCC: 5 | RNVC: 2
ASWEB72625: RNCC: 5 | RNVC: 2
AP12267A: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-665-6235
Inspection Mirror

996656235
SE002000: RNCC: 3 | RNVC: 2
C-NIC-TUM-C: RNCC: 5 | RNVC: 1

8 Apr 2002

5120-99-715-9499
Wrench

997159499
S6170-35030-3: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-465-3629
Friction Pad

994653629
NO PRIMARY REF 99-465-3629: RNCC: 3 | RNVC: 2
1B5662: RNCC: 5 | RNVC: 2

18 Jan 1977

5120-99-910-6237
Open End Wrench

999106237
BS192-TABLE 3 1/2X9/16BS: RNCC: 4 | RNVC: 1

25 Apr 1991

5120-99-253-8286
Box Wrench

992538286
5-096-20-1-0A: RNCC: 3 | RNVC: 2
096-20: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-773-4530
Socket Wrench Crowfoot Attachment

997734530
01T-C-13981: RNCC: 3 | RNVC: 2
01TC13981: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-910-4273
Socket Wrench Socket

999104273
BS4006: RNCC: 4 | RNVC: 1
H20060: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4566: RNCC: 6 | RNVC: 9
FA17581: RNCC: 6 | RNVC: 9
1L17: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-815-9181
Metering Valv Pilot

998159181
7144-508B: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-483-2137
Wrench

994832137
NO PRIMARY REF 99-483-2137: RNCC: 3 | RNVC: 2
UX10501A RRA: RNCC: 5 | RNVC: 2
F815-351996: RNCC: 6 | RNVC: 9

7 Feb 2002

5120-99-549-5212
Combination Box And Open End Wrench

995495212
43201: RNCC: 3 | RNVC: 2
302-042003: RNCC: 5 | RNVC: 2

5 Nov 2002

5120-99-766-2434
Torque Wrench

997662434
TRH 050 AND DTH 808: RNCC: 3 | RNVC: 2
100175-9000-167/DL/001: RNCC: 5 | RNVC: 2
100175-9000-167/DL/SHEET 001: RNCC: 5 | RNVC: 2
DTH 808 AND TRH 050: RNCC: 5 | RNVC: 2
100175-9000-167: RNCC: 5 | RNVC: 2
100175-9000-167/DL: RNCC: 5 | RNVC: 2
UW145E4: RNCC: 6 | RNVC: 9

13 Jul 1995

5120-99-803-5365
Roller Assembly Too

998035365
NO PRIMARY REF 99-803-5365: RNCC: 3 | RNVC: 2
FV620497: RNCC: 5 | RNVC: 2

1 Mar 1977

5120-99-138-6842
Combination Box And Open End Wrench

991386842
RJM15: RNCC: 3 | RNVC: 2
574-040: RNCC: 5 | RNVC: 2
1C1386842: RNCC: 6 | RNVC: 9
99-836-4255: RNCC: 6 | RNVC: 9
RJM15: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-955-8841
Drift

999558841
LRT-12-037: RNCC: 3 | RNVC: 2
274401: RNCC: 5 | RNVC: 2
RO274401: RNCC: 5 | RNVC: 9

25 Apr 1991

5120-99-868-9846
Flat Tip Screwdriver

998689846
NMT-121: RNCC: 3 | RNVC: 2

3 Dec 1998

5120-99-384-0034
Seal Removal Tool

993840034
EA6305G654-041: RNCC: 3 | RNVC: 2
1MEV5GG: RNCC: 6 | RNVC: 9

26 Nov 1999

5120-99-910-4556
Teleprint Extractor

999104556
H690: RNCC: 2 | RNVC: 2
13-1191: RNCC: 5 | RNVC: 2
10G428: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-124-0984

5120-99-120-9035
Rivete Nose Adaptor

5120-99-124-0995

5120-99-764-2347
Socket Head Screw Key

997642347
P.461.Z.1236/2.: RNCC: 3 | RNVC: 2
P.461.Z.1236/2.A: RNCC: 5 | RNVC: 2
727-462752: RNCC: 6 | RNVC: 9
H727-462752: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-411-8965
Drift-Bar

994118965
NO PRIMARY REF 99-411-8965: RNCC: 3 | RNVC: 2
ST1903-2: RNCC: 5 | RNVC: 9
27Q13488: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-726-4050
Caliper Fac Spanner

997264050
H23114: RNCC: 1 | RNVC: 2
3-2338-T3: RNCC: 3 | RNVC: 2
EAF041064-01: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-147-1141
Torque Wrench

991471141
S14-94-1006 164/1: RNCC: 3 | RNVC: 2

14 Feb 1994

5120-99-803-7005
Socket Wrench Adapter-Extension

998037005
A3/9100/5256.2: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-99-605-0685
Pawl

996050685
WS16-20-63229-3: RNCC: 3 | RNVC: 2
WS16-20-63229 ITEM 3: RNCC: 5 | RNVC: 2
26WX6050685: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-201-7853
Spanner Wrench

992017853
BS2090-TABLE 1 2.240IN.: RNCC: 4 | RNVC: 1
FV465989: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-120-0298
Screwdriver Bit

991200298
BS2559PT2AND5: RNCC: 3 | RNVC: 1
H5695: RNCC: 3 | RNVC: 2
DEFSTAN51-11PT26: RNCC: 5 | RNVC: 1
1C7518: RNCC: 6 | RNVC: 9
DEFSTAN51-11PT26-1: RNCC: 6 | RNVC: 9
TABLE11E: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-536-9472
Socket Wrench Handle Bar

995369472
TT140-62: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-720-0622
Reaction Tool Assem

997200622
EA6305G566-041: RNCC: 3 | RNVC: 2

20 Nov 1998

5120-99-464-3614
Valve Setting Tool

994643614
WG1588-0109-041: RNCC: 3 | RNVC: 2

23 Mar 2013

5120-99-662-9936
Seal Forming Tool

996629936
CSDE/CHK/GSS/205: RNCC: 3 | RNVC: 2

22 Mar 1996

5120-99-136-1086
Spanner Wrench

991361086
558/1/02368/011: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-212-2804
Socket Head Screw Key Set

992122804
NO PRIMARY REF 99-212-2804: RNCC: 3 | RNVC: 2
059-02-014: RNCC: 5 | RNVC: 2
KEN601-5970K: RNCC: 5 | RNVC: 2

8 May 2001

5120-99-302-4927
Face Spanner Wrench Socket

993024927
EA6305G515-101: RNCC: 3 | RNVC: 2

26 Nov 1999

5120-99-423-4587
Depth G Pin Spanner

994234587
NO PRIMARY REF 99-423-4587: RNCC: 3 | RNVC: 2
9032-128: RNCC: 5 | RNVC: 2
558470: RNCC: 6 | RNVC: 9

19 Mar 1990

5120-99-889-8198
Pump Seal Installer

998898198
17229218-0: RNCC: 3 | RNVC: 2
J 43772: RNCC: 5 | RNVC: 2
17229218-0: RNCC: 5 | RNVC: 2
021JB-021: RNCC: 6 | RNVC: 9

22 May 2002

5120-99-215-0789
Tele Alignment Tool

992150789
3201-86595-20-1: RNCC: 3 | RNVC: 2

14 Aug 1990

5120-99-401-2316
Four Way Nipple Key

994012316
NKF155: RNCC: 3 | RNVC: 2
S17-20C: RNCC: 5 | RNVC: 2
16C1948: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-900-5285
El Pin Straightener

999005285
NO PRIMARY REF 99-900-5285: RNCC: 3 | RNVC: 2
3W21893C: RNCC: 5 | RNVC: 2

7 Nov 1978

5120-99-794-4179
Box Wrench

997944179
SRS 603-8: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-120-1257
Torque Wrench

991201257
B3: RNCC: 3 | RNVC: 1
CP14661: RNCC: 3 | RNVC: 2
DEFSTAN51-11 PART 32: RNCC: 4 | RNVC: 1
H20266: RNCC: 5 | RNVC: 2
AK120Z: RNCC: 5 | RNVC: 2
DL-9-A: RNCC: 6 | RNVC: 9
0276-120-1257: RNCC: 6 | RNVC: 9
H5749: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-502-3255
Socket Head Screw Key

995023255
NO PRIMARY REF 99-502-3255: RNCC: 3 | RNVC: 2
S-51062020: RNCC: 5 | RNVC: 2
03731: RNCC: 5 | RNVC: 2

31 May 2013

5120-99-537-6934
Setting Mandrel

995376934
NO PRIMARY REF 99-537-6934: RNCC: 3 | RNVC: 2
3002838: RNCC: 5 | RNVC: 2

25 Apr 1991

5120-99-131-2991
Earth Assembly Cone

991312991
ESK 5242 14: RNCC: 3 | RNVC: 2
209-042338: RNCC: 5 | RNVC: 2

19 Feb 2002

5120-99-984-7336
Two Pin Tool

999847336
DR3180-0017-SA: RNCC: 3 | RNVC: 2

16 Apr 1993

5120-99-437-2157
Spanner Wrench

994372157
NO PRIMARY REF 99-437-2157: RNCC: 3 | RNVC: 2
94319: RNCC: 5 | RNVC: 2
94319: RNCC: 5 | RNVC: 9

28 Jan 2010

5120-99-980-0100
Retractor Locator

999800100
NO PRIMARY REF 99-980-0100: RNCC: 3 | RNVC: 2
6234757-001: RNCC: 5 | RNVC: 2
C570-LWW010754: RNCC: 6 | RNVC: 9

20 Jun 2001

5120-99-645-1425
Seal Installat Tool

996451425
WD0388-00325-103: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-910-6367
Socket Wrench Socket

999106367
BS4006-TABLE 14 1-3/16A/F: RNCC: 4 | RNVC: 1
EB1187: RNCC: 5 | RNVC: 2
DEFSTAN51-11 PART 4: RNCC: 6 | RNVC: 9
DL-9-A: RNCC: 6 | RNVC: 9
H4482: RNCC: 6 | RNVC: 9
TABLE I(D) 1-3/16A/F: RNCC: 6 | RNVC: 9
1L119: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-423-0812
Hydraulic Jack Body

994230812
NO PRIMARY REF 99-423-0812: RNCC: 3 | RNVC: 2
MD611: RNCC: 5 | RNVC: 2
GM10100: RNCC: 5 | RNVC: 2
4Q2610: RNCC: 6 | RNVC: 9

25 Apr 1991

5120-99-554-4646
Socket Wrench Handle Bar

995544646
51-12-714: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-99-612-1414
Spanner Wrench

996121414
121E93-730-00-0: RNCC: 3 | RNVC: 2

25 Apr 1991

Load More Results