5120-26-301-1123

880-8889 Final Drive Assembly Alignment Pin P-T0L86778RNCC: 3 | RNVC: 2 | DAC: 6 26 Jun 1980 5120-26-301-1123

5995-66-154-3597 5995661543597 661543597 is a definite continuous length of cable, special purpose, electrical, having one or more ends processed or terminated in fittings which provide for connection to other items. excludes items having branches or forks. excludes lead, test and cable and conduit assembly, electrical.

5310-33-154-3597 5310331543597 331543597 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

6625-01-154-3597 6625011543597 011543597

3120-15-154-3597 3120151543597 151543597 RULLO MOTO LINEARE-