5120-17-054-8955

8455-00-069-4843 8455000694843 000694843 is a device to be affixed to the uniform of enlisted personnel to indicate rate and/or specific specialty. excludes insignia, grade, enlisted personnel.

5340-01-069-4843 5340010694843 010694843 is a clip formed from resilient wire stock into a shape resembling the letter u, with each of the prongs having one or more curvatures along its length. it is designed to hold itself in place by its inherent spring action when fitted into the groove(s) or notch(es) of the item upon which a part, shaft, pin, or a like item is to be held in place. see also pin, lock; ring, retaining and clip, spring tension. for items specifically designed for aviaton, see clip(1), retaining, aviation.

how to enable JavaScript in your web browser . 5310-33-160-6919Flat Washer5310331606919 331606919 694843

5310-14-500-5463 5310145005463 145005463 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.