5120-15-220-3370

More... ) https//www.nsnlookup.com /cage Cem Elettromeccanica (CAGE Code AD602) 5 16 Nov 2005 5120-15-220-3370

9330-14-386-8446 9330143868446 143868446 is a cellular, solid or laminated plastic material including plastic film furnished in widths of 6 inches (152.4mm) or less. it includes plastic material cut to specific lengths or a continuous roll form. it may include fillers, reinforcements or pigments. for items which have definite rated electrical characteristics, see tape, insulation, electrical. excludes plastic material, cellular; dry transfer sheet.

5305-99-122-6717 5305991226717 991226717 is an externally threaded fastener whose threaded portion is of one nominal diameter, no 0 (0.060 in./1.5 mm) or larger, designed to be held or driven with either a wrench or an inserted driver or both (excluding internal socket or internal multiple spline types), in sizes below no. 10 (0.190 in./5 mm). no. 10 and larger sizes must have a head designed for any type inserted driver (excluding internal socket or internal multiple spline types), but may also be designed for external wrenching. a locking feature may be incorporated in the design of the head or threads. excludes bolt, clevis; bolt, externally relieved body; screw, externally relieved body; and screw, assembled washer. see also, screw, instrument; bolt, machine; bolt, internal wrenching; and screw, cap socket head.

3020-00-868-3587 3020008683587 008683587 is a gear, cylindrical in form, with straight teeth on the outer surface parallel to the axis of the gear. see also gear, antibacklash, spur. for bulk material, see rod, pinion.

5306-00-245-3746 5306002453746 002453746 is a high strength, 160,000 pounds per square inch (1100 megapascals) minimum tensile strength externally threaded fastener designed for use in applications involving great shear stress. the head is designed to accommodate an external wrench or driver. the head is not designed to be held or driven with an inserted driver, nor is it designed for rotation by the thumb and fingers. the unthreaded portion is of specific grip length, plated or unplated, and is machined to a tolerance of one thousandth (0.001) of an inch (0.025 mm) or less of a specific diameter for items one inch (25 mm) or less in diameter. items over one inch (25 mm) in diameter shall have a tolerance of fifteen ten thousandths (0.0015) of an inch (0.038 mm) or less. the nominal major diameter of the threads shall be at least one thousandth (0.001) of an inch (0.025 mm) below the minimum shank diameter, but not below the minimum major diameter for applicable class of fit, as shown in the screw thread standards, fed std h28 and/or other nationally recognized standards. a locking feature may be incorporated in the design of the head or threads. see bolt, machine and bolt, clevis.