5120-15-148-5126

14-515-5335 Final Drive Assembly Alignment Pin 150G4356RNCC: 3 | RNVC: 2 | DAC: 6 21 Jul 1999 5120-15-148-5126

5310-01-484-7921 5310014847921 014847921 is a washer having a centrally located hole with a solid or laminated cross-section and two flat parallel bearing surfaces. the hole must be 75 percent or less than the largest dimension and the bearing surface finish is greater than 32 microinch (0.8 micrometer). the thickness cannot exceed 25 percent of the largest outside dimension. when the largest outside dimension is less than 1/4 inch or 6mm, the thickness must be 0.006 inches (0.15mm) or greater and for items 1/4 inch (6mm) or larger, the thickness must be 0.016 inches (0.4mm) or greater. the maximum tolerance is applied to dimensions and used as a determining factor. items with separable lamination use shim. for items fabricated from ceramic or electrically rated materials by specification or industry standards use insulator (1), washer. excludes disk, valve, graphite impregnated and lubricated items.

2840-14-484-7921 2840144847921 144847921 is an item having provisions on the outer periphery for attaching a designated number of blade, compressor, aircraft gas turbine engine. it also has provisions for attachment to a hub, compressor, aircraft gas turbine engine and/or a shaft, turbine, aircraft gas turbine engine.

2915-00-484-7921 2915004847921 004847921 PIN,TAPERED,PLAIN