What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 99 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 99 of 110

5120-14-391-0287
Torque Wrench Adapter

143910287
1405-121E20-200-00-1: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-406-6606
Spanner Wrench

144066606
853-201-170-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-488-5327
Socket Wrench Adapter-Extension

144885327
71L: RNCC: 3 | RNVC: 2
71L: RNCC: 5 | RNVC: 9

15 May 1997

5120-14-484-7108
Socket Head Screw Key

144847108
7031: RNCC: 3 | RNVC: 2

4 Dec 1996

5120-14-317-0779
Electrical Card Extractor

143170779
G1705B: RNCC: 3 | RNVC: 2
17058: RNCC: 5 | RNVC: 9
1705B: RNCC: 5 | RNVC: 9
1705BLEU: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-523-5437
Hand Hose Fitting Swaging Tool Kit

145235437
DLTFRPSKTM080: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-217-2653

5120-14-490-8877
Etampe

144908877
4067 150 000 374: RNCC: 3 | RNVC: 2
F300 0T 000 5149: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-317-0365
Nettoyage Raclette

143170365
RT4615: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-276-9190

5120-14-428-2566
Flat Tip Screwdriver

144282566
AG.8X200: RNCC: 3 | RNVC: 2
3148510057248: RNCC: 5 | RNVC: 2
AG8X200: RNCC: 5 | RNVC: 2
91626640: RNCC: 5 | RNVC: 2
0005724: RNCC: 5 | RNVC: 9

8 Dec 1988

5120-14-507-6753
Open End Wrench

145076753
467365: RNCC: 3 | RNVC: 2

11 Aug 1998

5120-14-490-2208
Bearing And Bushing Inserter

144902208
1X56 136 584: RNCC: 3 | RNVC: 2
1X56 136 584: RNCC: 5 | RNVC: 2

19 Sep 1997

5120-14-466-3764
Spanner Wrench

144663764
M47592-100: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-338-4769
Faux Mor Demi-Coqui

143384769
PR47582-1M1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-492-6283
Cle

144926283
NO PRIMARY REF14-492-6283: RNCC: 3 | RNVC: 2
12-520-101: RNCC: 5 | RNVC: 9
F300 0T 008 2104: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-501-0227
Cle Coudee

145010227
83H-22: RNCC: 3 | RNVC: 2
83H22: RNCC: 3 | RNVC: 2
83H.22: RNCC: 5 | RNVC: 2
3148511242018: RNCC: 5 | RNVC: 2
F300 0T 025 0525: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-215-0091

5120-14-372-9537
Cross Tip Screwdriver

143729537
AFP.2: RNCC: 3 | RNVC: 2
3148510053400: RNCC: 5 | RNVC: 2
AFP2: RNCC: 5 | RNVC: 2
162-5931: RNCC: 5 | RNVC: 2
0005340: RNCC: 5 | RNVC: 9
FACOMAFP.2: RNCC: 5 | RNVC: 9
85-691-6790: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-566-7161
Jack Elevating Block

145667161
MDS92L002: RNCC: 3 | RNVC: 2

9 Dec 2010

5120-14-300-9633
Positionneur Elemen

143009633
341A93-3305-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-395-7473
De Montage Outil

143957473
704321-00: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-523-5456
Hydraulic Fitting Crimping Tool Head

145235456
DLT40PSHA3016: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-236-4624
Spanner Wrench

142364624
902A1REP8: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-526-1550
Socket Wrench Screwdriver Attachment

145261550
103249: RNCC: 3 | RNVC: 2
0315101750: RNCC: 5 | RNVC: 2

4 Jul 2001

5120-14-341-2925

5120-14-208-7297

5120-14-573-1913
Hand Terminal Crimping Tool

145731913
VDI9158: RNCC: 3 | RNVC: 2

20 Sep 2012

5120-14-481-1672
Outil De Reglage Pe

144811672
46832775: RNCC: 3 | RNVC: 2

24 Apr 1996

5120-14-355-5488

5120-14-031-7526

5120-14-278-0824

5120-14-383-6523
Vise Jaw Caps

143836523
S10-0152-0761: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-441-2377
Hand Terminal Crimping Tool

144412377
703A93-0901-22: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-498-0677
Cle

144980677
6630-00: RNCC: 3 | RNVC: 2
6630-00: RNCC: 5 | RNVC: 9
F300 0T 002 1570: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-326-1421
Demonte-Patins

143261421
73115-01-22P2REP1: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-392-0825
Torque Wrench Adapter

143920825
853-100-072-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-275-9128
Extenseurs Jeu

142759128
R31674-18-21-24: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-353-9752
Locking Device Removal Tool

143539752
OXB501-108-000-10: RNCC: 3 | RNVC: 2
0XB501-108-000-10: RNCC: 5 | RNVC: 2

16 Jan 1979

5120-14-204-4432
Cle De Demontage

142044432
80900-250: RNCC: 3 | RNVC: 2
78576-136: RNCC: 5 | RNVC: 2
85-598-4661: RNCC: 6 | RNVC: 9

1 Jan 1963

5120-14-386-9452
Socket Wrench Socket

143869452
C3388-040: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-243-6154
Montage De Percage

142436154
8079: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-463-1694
Mechanical Puller Attachment

144631694
16380272: RNCC: 3 | RNVC: 2
16380272: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-463-0217
Spanner Wrench

144630217
479260K: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-315-5987
Screwdriver Bit

143155987
ES.210: RNCC: 3 | RNVC: 2
ES.210: RNCC: 5 | RNVC: 2
3148510246611: RNCC: 5 | RNVC: 2
0024661: RNCC: 5 | RNVC: 9
ES10: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-497-5559
Cle

144975559
IF1164010: RNCC: 3 | RNVC: 9
F300 0T 023 3548: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-325-9604

5120-14-277-9783

5120-14-369-1321
Broch Cent Pal Obus

143691321
341A98-3309-22: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-309-1951
Mors Serrage Etau

143091951
S10-0152-0541: RNCC: 3 | RNVC: 2
85-686-2571: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-476-3072
Valve Spring Compressor

144763072
885128-9: RNCC: 3 | RNVC: 2
885128: RNCC: 3 | RNVC: 2
RAB3886: RNCC: 5 | RNVC: 2
885128: RNCC: 5 | RNVC: 9

6 Jun 1995

5120-14-530-9290
Combination Open End And Spanner Wrench

145309290
SMC-P-17183-012-0: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-14-222-7143

5120-14-466-4070
Graissage Outillage

144664070
MMG060-22: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-298-3024
Tournevis Special

142983024
LFP54-624: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-258-7763
Outil Manoeuvre Pal

142587763
FH137-911: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-347-6449
Extracteur Bague

143476449
115750: RNCC: 3 | RNVC: 2
85-689-3528: RNCC: 6 | RNVC: 9

1 Mar 1978

5120-14-444-3482
Socket Wrench Socket

144443482
GS86-10: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-209-5121
Cle Tulipe Reservoi

142095121
M2-019: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-379-6026
Monte Inter Bague

143796026
26545904700: RNCC: 3 | RNVC: 2
311709-00: RNCC: 5 | RNVC: 2
26.545.9047.00: RNCC: 5 | RNVC: 2
26545904700: RNCC: 5 | RNVC: 2
31170900: RNCC: 5 | RNVC: 2
265459047: RNCC: 5 | RNVC: 9

1 Oct 1982

5120-14-518-9509
Open End Wrench

145189509
0014144: RNCC: 3 | RNVC: 2

1 Mar 2000

5120-14-333-3029
Abrasive Wheel Dresser Cutters

143333029
JM2: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-368-1457
Screw Thread Insert Inserter

143681457
01500178700: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-517-9192
Handling Tool Arm

145179192
46874490: RNCC: 3 | RNVC: 2

18 Jan 2000

5120-14-543-1567
Socket Wrench Screwdriver Attachment

145431567
61383695: RNCC: 3 | RNVC: 2

26 Aug 2004

5120-14-225-3988

5120-14-353-2487

5120-14-442-4507
Spanner Wrench

144424507
IF1033-151: RNCC: 3 | RNVC: 9

16 Oct 1990

5120-14-251-3965
Douille A Ergots

142513965
9970-115-334: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-522-5813
A Fourch Tournevis

145225813
2239-001: RNCC: 3 | RNVC: 2
CRPM AL0: RNCC: 3 | RNVC: 2
SYB2611: RNCC: 5 | RNVC: 2
TOURNEVIS BATT MASTER GARDE 3000: RNCC: 5 | RNVC: 2

8 Nov 2000

5120-14-222-1690
Flat Tip Screwdriver

142221690
NO PRIMARY REF14-222-1690: RNCC: 3 | RNVC: 2
S253072: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-271-1404

5120-14-368-4622

5120-14-360-3801
Mechanical Puller Attachment

143603801
C66264: RNCC: 3 | RNVC: 2
101726: RNCC: 5 | RNVC: 2

23 Nov 1979

5120-14-225-8907

5120-14-545-9225
Adjustable Wrench

145459225
113A.12C: RNCC: 3 | RNVC: 2
113A.12C: RNCC: 5 | RNVC: 2

27 May 2005

5120-14-200-4652

5120-14-266-5199
Spanner Wrench

142665199
PR47177: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-214-6080
Spanner Wrench

142146080
0UT9: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-349-0723

5120-14-379-0701
Spanner Wrench

143790701
365A93-3100-00: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-390-3205
Outil Positionnemen

143903205
01-90900-072: RNCC: 3 | RNVC: 2
01-90-900-072: RNCC: 5 | RNVC: 2
85-692-4863: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-321-8401
Socket Head Screw Key

143218401
8810424004: RNCC: 3 | RNVC: 2
85-590-6190: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-529-1234
Splicing Sleeve Compressing Tool

145291234
0410 0139 000: RNCC: 3 | RNVC: 2
KY4: RNCC: 5 | RNVC: 2

13 Mar 2002

5120-14-511-3873
Flat Tip Screwdriver

145113873
AZFH.8EX175: RNCC: 3 | RNVC: 2
13439: RNCC: 5 | RNVC: 2
3148510134390: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-399-3734
Cone De Montage

143993734
100-479: RNCC: 3 | RNVC: 2
OUT100-479: RNCC: 5 | RNVC: 9

6 Mar 1985

5120-14-335-1181

5120-14-491-3824
Cle Pla

144913824
1110: RNCC: 3 | RNVC: 2
F300 0T 002 6133: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-354-5705
Socket Head Screw Key

143545705
NO PRIMARY REF14-354-5705: RNCC: 3 | RNVC: 2
7511-183-03241: RNCC: 5 | RNVC: 9
85-689-3702: RNCC: 6 | RNVC: 9

31 Jan 1979

5120-14-200-9459
Open End Wrench

142009459
NO PRIMARY REF14-200-9459: RNCC: 3 | RNVC: 2
0104550: RNCC: 5 | RNVC: 2
33 11-16X25-32: RNCC: 5 | RNVC: 2
44 11-16X25-32: RNCC: 5 | RNVC: 2
44 11-16X25-32CP: RNCC: 5 | RNVC: 2
44.11-16X25-32CP: RNCC: 5 | RNVC: 2
44.11/16X25/32: RNCC: 5 | RNVC: 2
44S11-16X25-32: RNCC: 5 | RNVC: 2
11 11-16X25-32: RNCC: 5 | RNVC: 2
91639951: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-430-2682
Cross Tip Screwdriver

144302682
ACZD.2X125: RNCC: 3 | RNVC: 2
ACD.2X125: RNCC: 5 | RNVC: 2
3148510039060: RNCC: 5 | RNVC: 2
ACD-2X125: RNCC: 5 | RNVC: 2
0238633Q00: RNCC: 5 | RNVC: 2
162-7634: RNCC: 5 | RNVC: 2
0613 356 2: RNCC: 5 | RNVC: 2
H24173: RNCC: 5 | RNVC: 2
0003906: RNCC: 5 | RNVC: 9
FACOMACD.2X125: RNCC: 5 | RNVC: 9

15 Mar 1989

5120-14-245-1749
Poincon De Bouchonn

142451749
G1-15-486: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-449-7237
Pliers

144497237
9689160311: RNCC: 3 | RNVC: 2
89231373: RNCC: 5 | RNVC: 2
91739777: RNCC: 5 | RNVC: 2
EFEP91: RNCC: 5 | RNVC: 2
KDEP2941: RNCC: 5 | RNVC: 2

4 Sep 1991

5120-14-358-3653
Adjustable Wrench

143583653
105-175: RNCC: 3 | RNVC: 2
100014484: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-371-7050
Electrical Card Extractor

143717050
914689: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-452-1299
Bearing And Bushing Inserter And Remover

144521299
45057855: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-313-8800
Spanner Wrench

143138800
0M427: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-540-7912
Blacksmith's Vise

145407912
ETAUVF: RNCC: 3 | RNVC: 2
ETAUUF: RNCC: 5 | RNVC: 9

23 Apr 2004

5120-14-373-6747
Open End Wrench

143736747
223156: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-461-0217
Socket Wrench Socket

144610217
29518028: RNCC: 3 | RNVC: 2

17 Feb 1993

5120-14-511-1058
Sheet Metalworking Stake

145111058
2740006: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-539-8792
Combination Box And Open End Wrench

145398792
37.14: RNCC: 3 | RNVC: 2
3148510987743: RNCC: 5 | RNVC: 2

17 Feb 2004

5120-14-470-7703
Spanner Wrench

144707703
629197760: RNCC: 3 | RNVC: 2
F300 0T 017 1247: RNCC: 5 | RNVC: 9

6 Jul 1994

5120-14-433-3244
Outillage Mandrin

144333244
536718: RNCC: 3 | RNVC: 2
00536718: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-511-7326
Solid Center Punch

145117326
255.G4: RNCC: 3 | RNVC: 2
160452: RNCC: 5 | RNVC: 2
3148511604526: RNCC: 5 | RNVC: 2

13 Jan 1999

5120-14-384-7611
Electrical Card Extractor

143847611
20198020: RNCC: 3 | RNVC: 2
20198020: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-457-9765
Seal Inserter And Remover

144579765
523072: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-204-8896

5120-14-240-4775

5120-14-328-6686

5120-14-256-1535
Craftsman's Tweezers

142561535
NO PRIMARY REF14-256-1535: RNCC: 3 | RNVC: 2
5D: RNCC: 5 | RNVC: 2
748-5: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-506-2431
Electronic Component Inserter And Remover

145062431
1350-E-28: RNCC: 3 | RNVC: 2
1350E28: RNCC: 3 | RNVC: 2
3272670348813: RNCC: 5 | RNVC: 2

15 Apr 1998

5120-14-344-3069
Socket Wrench Socket

143443069
SH12: RNCC: 3 | RNVC: 2
SH-12: RNCC: 3 | RNVC: 2
3203012: RNCC: 3 | RNVC: 2
S.12H: RNCC: 3 | RNVC: 2
3148510539409: RNCC: 5 | RNVC: 2
S12H: RNCC: 5 | RNVC: 2
250-5119: RNCC: 5 | RNVC: 2
3272670224339: RNCC: 5 | RNVC: 2
0053940: RNCC: 5 | RNVC: 9
FACOMS.12H: RNCC: 5 | RNVC: 9

10 Aug 1977

5120-14-282-9445
Cle Bouteil Acetyle

142829445
NO PRIMARY REF14-282-9445: RNCC: 3 | RNVC: 2
139: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-558-5177
Mechanical Puller

145585177
888-492-700-1: RNCC: 3 | RNVC: 2

10 Oct 2008

5120-14-360-7700
Axe De Roue Montage

143607700
MAS4719: RNCC: 3 | RNVC: 2
M532-01-12000-2A2: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-357-9959
Joint Chargeur

143579959
MGF254-21: RNCC: 3 | RNVC: 2
MGF254-21: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-328-2765
Tap And Reamer Wrench

143282765
830A.10L: RNCC: 3 | RNVC: 2
0206520: RNCC: 5 | RNVC: 2
830-10L: RNCC: 5 | RNVC: 2
830.10L: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-483-2289
Sertissage Embout

144832289
26-519-05: RNCC: 3 | RNVC: 2
26-519-10: RNCC: 5 | RNVC: 2

28 Aug 1996

5120-14-235-9706
Spanner Wrench

142359706
E74323B17AGW: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-471-0846
Cle Pour Barillet

144710846
3424553: RNCC: 3 | RNVC: 2
RAB3419: RNCC: 5 | RNVC: 2

26 Jul 1994

5120-14-297-1244

5120-14-430-3435
Preformed Packing Inserter

144303435
RT16986: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-329-9304
Screwdriver Bit

143299304
ENS.316: RNCC: 3 | RNVC: 2
3148510239293: RNCC: 5 | RNVC: 2
0023929: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-421-6317
Mechanical Puller Adapter

144216317
216818: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-531-8839
Bearing And Bushing Inserter And Remover

145318839
T623G3003101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-266-1704
Flat Tip Screwdriver

142661704
3599065: RNCC: 3 | RNVC: 2
3599065: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-237-5452
Extracteurs Axes De

142375452
EEAV1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-234-3347

5120-14-558-4093
Ring Beanding Tool

145584093
T300-184-1: RNCC: 3 | RNVC: 9
T300-184-1: RNCC: 5 | RNVC: 9

1 Oct 2008

5120-14-249-3928
Cle Speciale

142493928
3210-95-33-150: RNCC: 3 | RNVC: 2
3210-98-31-000: RNCC: 5 | RNVC: 2
08-401: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-459-2247
Emmanchement Outil

144592247
MMG047-69: RNCC: 3 | RNVC: 2
MMG047-69: RNCC: 5 | RNVC: 2

19 Nov 1992

5120-14-201-0595
Open End Wrench

142010595
44.10X12: RNCC: 3 | RNVC: 2
44.10X12: RNCC: 5 | RNVC: 2
0102384: RNCC: 5 | RNVC: 2
3148511023853: RNCC: 5 | RNVC: 2
44-10X12: RNCC: 5 | RNVC: 2
0110743P00: RNCC: 5 | RNVC: 2
0102385: RNCC: 5 | RNVC: 2
91352531: RNCC: 5 | RNVC: 2
250-4712: RNCC: 5 | RNVC: 2
FACOM44.10X12: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-371-7725
Socket Head Screw Key Set

143717725
7195: RNCC: 3 | RNVC: 2
85-691-5194: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-476-4092
Eastern Pattern Scoop

144764092
GB PELLE A NEIGE MINI-TELEPRO: RNCC: 3 | RNVC: 2
GB: RNCC: 5 | RNVC: 2
PELLE A NEIGE MINI-TELEPRO: RNCC: 5 | RNVC: 2

12 Jun 1995

5120-14-356-7405
Bearing And Bushing Remover

143567405
3130S95-47-160: RNCC: 3 | RNVC: 2
85-689-7829: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-490-6926
File

144906926
241 F 00949 000: RNCC: 3 | RNVC: 2
F300 0T 000 1056: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-373-6774
Open End Wrench

143736774
225768: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-410-3500
Bearing And Bushing Inserter And Remover

144103500
8810131077: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-415-0302
Flat Tip Screwdriver

144150302
96104093: RNCC: 1 | RNVC: 2
ATH250: RNCC: 3 | RNVC: 2
96104093: RNCC: 5 | RNVC: 9

26 Mar 1987

5120-14-222-1454
Cross Tip Screwdriver

142221454
130P2: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-209-4200
Flat Tip Screwdriver

142094200
FRP42: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-397-4850
Gabarit De Cintrage

143974850
73011070: RNCC: 3 | RNVC: 2
73011073: RNCC: 5 | RNVC: 2
91710795: RNCC: 5 | RNVC: 2
R073011070: RNCC: 5 | RNVC: 2

14 Dec 1984

5120-14-344-1287
Decalamina Grattoir

143441287
8811580200: RNCC: 3 | RNVC: 2

13 Jul 1977

5120-14-557-6467
Hand Hammer

145576467
62095437AA: RNCC: 3 | RNVC: 2

1 Jul 2008

5120-14-245-2253

5120-14-200-3988

5120-14-337-3814

5120-14-201-0449
Socket Head Screw Key

142010449
62 5-32: RNCC: 3 | RNVC: 2
82 5-32: RNCC: 3 | RNVC: 2
62-5/32: RNCC: 3 | RNVC: 2
3272670222182: RNCC: 5 | RNVC: 2
60 5-32: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-458-6715
Cross Tip Screwdriver

144586715
ADS.1VSE: RNCC: 3 | RNVC: 2
H24138: RNCC: 5 | RNVC: 2
3148510047201: RNCC: 5 | RNVC: 2
AD.1VSE: RNCC: 5 | RNVC: 9
0004720: RNCC: 5 | RNVC: 9

29 Oct 1992

5120-14-303-6303
Open End Wrench

143036303
D28: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-277-1180

5120-14-570-7256
Socket Wrench

145707256
94-SD19: RNCC: 3 | RNVC: 2

19 Jan 2012

5120-14-421-6304
Open End Wrench

144216304
210103: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-506-0606
Stakeholder Bench Plate

145060606
CKS36: RNCC: 3 | RNVC: 2

2 Apr 1998

5120-14-534-0447
Bearing And Bushing Remover

145340447
SAWARI PL18: RNCC: 3 | RNVC: 2
SYQ2531: RNCC: 5 | RNVC: 2
BST030070-000-0004: RNCC: 5 | RNVC: 9
CIAL-23-5B005 OUTILLAGE01/805: RNCC: 5 | RNVC: 9

11 Mar 2003

5120-14-249-6752

5120-14-373-7002
Detent Handling Tool

143737002
330A98-2167-01: RNCC: 3 | RNVC: 2
330A-98-2167-01: RNCC: 5 | RNVC: 2

13 Nov 1981

5120-14-204-3002
Cle Speciale

142043002
M3-025: RNCC: 3 | RNVC: 2
M3-025: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-431-7847
Socket Head Screw Key

144317847
0453-6089907: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-545-9182
Socket Head Screw Key

145459182
61369521: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-424-5252
Spanner Wrench

144245252
7M469: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-444-2695
Spanner Wrench

144442695
0288926: RNCC: 3 | RNVC: 2

21 Dec 1990

5120-14-358-4684
Screwdriver Bit

143584684
ES5: RNCC: 3 | RNVC: 2

13 Aug 1979

5120-14-375-5514
Electron Tube Extractor

143755514
16909239: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-412-1598
Cle A Ergots Ergot

144121598
188439: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-327-0887
Electronic Equipment Tuning Wand

143270887
1065965: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-397-7620
Cle A Ergots

5120-14-571-8906
Torque Wrench Adapter

145718906
13.23: RNCC: 3 | RNVC: 2

22 May 2012

5120-14-458-1127
Cle Bouchon Pile

144581127
39255216: RNCC: 3 | RNVC: 2
39255216: RNCC: 3 | RNVC: 9
5120AA2064416: RNCC: 6 | RNVC: 9

8 Oct 1992

5120-14-436-0308
Controle Outillage

144360308
RT34424: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-296-8080

5120-14-307-6485
Plaque Support Demo

143076485
33531C: RNCC: 3 | RNVC: 2
33531: RNCC: 5 | RNVC: 2
33531A: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-214-2838
Cle Speciale Pour E

142142838
9970-115-239: RNCC: 3 | RNVC: 2
9970-115-239-01: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-440-1467
Socket Head Screw Key

144401467
3511-310-89001: RNCC: 3 | RNVC: 2
3511-310-89001: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-242-4641
Socket Wrench Socket

142424641
S29: RNCC: 3 | RNVC: 2
M6-016: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-441-2267
Socket Wrench Socket

144412267
6802V32-3175-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-230-6533
Spanner Wrench

142306533
42560: RNCC: 3 | RNVC: 2
42560A: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-243-6153

5120-14-233-6076

5120-14-514-2104
Screw Thread Insert Inserter

145142104
01500786600: RNCC: 3 | RNVC: 2

28 Apr 1999

5120-14-232-7193
Hand Terminal Crimping Tool

142327193
46120: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-542-9376
Engine Valve Seat Insert Replacing Tool

145429376
8460004: RNCC: 3 | RNVC: 2
8460004: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-287-8938

5120-14-386-4524

5120-14-466-4559
Screwdriver Bit Set And Handle

144664559
ATCZ-5: RNCC: 3 | RNVC: 2
3148515006999: RNCC: 5 | RNVC: 2
ATC-5: RNCC: 5 | RNVC: 2

9 Nov 1993

5120-14-276-3092
Socket Wrench Socket

142763092
R1-2: RNCC: 3 | RNVC: 2
R-1/2: RNCC: 3 | RNVC: 2
R1-2: RNCC: 3 | RNVC: 2
468716: RNCC: 5 | RNVC: 2
3272670285156: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-515-5347
Final Drive Assembly Alignment Pin

145155347
150G4369: RNCC: 3 | RNVC: 2

21 Jul 1999

5120-14-569-8586
Tacker

145698586
24821700: RNCC: 3 | RNVC: 2
130024: RNCC: 5 | RNVC: 2
1102090: RNCC: 5 | RNVC: 2

25 Oct 2011

5120-14-460-5418
Bearing Staking Installation Tool

144605418
NO PRIMARY REF14-460-5418: RNCC: 3 | RNVC: 2
BLB137: RNCC: 5 | RNVC: 9
85-694-5628: RNCC: 6 | RNVC: 9

27 Jan 1993

5120-14-484-6505
Socket Wrench Socket

144846505
NO PRIMARY REF14-484-6505: RNCC: 3 | RNVC: 2
3148510532936: RNCC: 5 | RNVC: 2
RB.13: RNCC: 5 | RNVC: 2
RB13: RNCC: 5 | RNVC: 2
0053293: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-304-4031
Desaxeur Pied Cor E

143044031
TMY20-27-302: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-461-3528
Flat Tip Screwdriver

144613528
NO PRIMARY REF14-461-3528: RNCC: 3 | RNVC: 2
0003812: RNCC: 5 | RNVC: 2
AC.2,5X100: RNCC: 5 | RNVC: 2
1057430E00: RNCC: 5 | RNVC: 2

9 Mar 1993

5120-14-387-9813
Spanner Wrench

143879813
853-115-082-0: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-201-3062
Flat Tip Screwdriver

142013062
104-1: RNCC: 3 | RNVC: 2
ATH75: RNCC: 3 | RNVC: 2
701-6X75: RNCC: 3 | RNVC: 9
A214-75: RNCC: 5 | RNVC: 2
DEM701-6X75: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-265-0912
Detent Handling Tool

142650912
330A98-2041-00: RNCC: 3 | RNVC: 2
330A98-2041-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-490-8678
Meche

144908678
4057 020 003 458: RNCC: 3 | RNVC: 2
F300 0T 000 4916: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0132
Cle

144910132
4602 007 200 063: RNCC: 3 | RNVC: 2
F300 0T 001 0918: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-375-3226
Tige De Montage

143753226
A33300V: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-232-9939
Matrice De Sertissa

142329939
48930: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-408-9624
Outil A Rivet

144089624
853-201-304-0: RNCC: 3 | RNVC: 2

9 Apr 1986

5120-14-271-6082
Open End Wrench

142716082
E74-301-32: RNCC: 2 | RNVC: 2
69-32: RNCC: 3 | RNVC: 2
AA7-62NF1-1433: RNCC: 3 | RNVC: 2
E74301C32WWF: RNCC: 5 | RNVC: 1
3272670300781: RNCC: 5 | RNVC: 2
271-32: RNCC: 5 | RNVC: 9
AA7-62NF1-1433: RNCC: 5 | RNVC: 9
AA7-62NF1-1433: RNCC: 6 | RNVC: 9

1 Jan 1970

5120-14-325-3884
Rodoir De Robinet

143253884
NO PRIMARY REF14-325-3884: RNCC: 3 | RNVC: 2
PT761REP60: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-280-0531
Spanner Wrench

142800531
CZ53700: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-436-0224
Preformed Packing Inserter

144360224
807621: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-442-1099
Socket Head Screw Key

144421099
6724966: RNCC: 3 | RNVC: 2
6724966: RNCC: 5 | RNVC: 2

2 Oct 1990

5120-14-425-9258
Mechanical Puller Attachment

144259258
600112: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-461-0140
Socket Wrench Socket

144610140
45057128: RNCC: 3 | RNVC: 2
45057128: RNCC: 5 | RNVC: 9

17 Feb 1993

5120-14-401-5195
Fixed Open End Wrench Set

144015195
31.JE9: RNCC: 3 | RNVC: 2
3148515278556: RNCC: 5 | RNVC: 2
31JE9: RNCC: 5 | RNVC: 2
91601599: RNCC: 5 | RNVC: 2
0527855: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-283-4954
Spanner Wrench

142834954
E306878: RNCC: 3 | RNVC: 9
E306878: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-419-1060
Cart Cle Extracteur

144191060
1248-562-000: RNCC: 3 | RNVC: 2
1248-562-000: RNCC: 5 | RNVC: 2

30 Sep 1987

5120-14-321-8083
Open End Wrench

143218083
3160S95-42-003: RNCC: 3 | RNVC: 2
85-100-3170: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-514-8400
Cross Tip Screwdriver

145148400
ENFD6569-0X60: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-272-3650
Open End Wrench

142723650
E74302C17-21WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-386-1601
Spanner Wrench

143861601
6801P32-6003-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-438-0952
Socket Head Screw Key

144380952
NO PRIMARY REF14-438-0952: RNCC: 3 | RNVC: 2
393674: RNCC: 5 | RNVC: 9
393674: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-14-438-5009
Spanner Wrench

144385009
37AM021: RNCC: 3 | RNVC: 2
85-694-0446: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-543-3198
Screwdriver Bit

145433198
EH.205/16: RNCC: 3 | RNVC: 2

20 Oct 2004

5120-14-566-3512
Palm-Grip Ratchet Wrench

145663512
I981M5111A7G0001-11: RNCC: 3 | RNVC: 2

8 Nov 2010

5120-14-284-1923

5120-14-297-0549
Cle De Reglage Mano

142970549
455-01M1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-223-3296
Extracteur De Quart

142233296
NO PRIMARY REF14-223-3296: RNCC: 3 | RNVC: 2
4326-4: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-488-6856
Retaining Ring Installation Tool

144886856
287079148: RNCC: 3 | RNVC: 2
F300 0T 018 9350: RNCC: 6 | RNVC: 9

28 May 1997

5120-14-465-8942
Fuel Injection Nozzle Extractor

144658942
45057132: RNCC: 3 | RNVC: 2
45057132: RNCC: 5 | RNVC: 9

14 Oct 1993

5120-14-354-9514
Mechanical Finger

143549514
500-00-18: RNCC: 3 | RNVC: 2
500-00-18: RNCC: 5 | RNVC: 9

20 Feb 1979

5120-14-340-8975
Socket Wrench Crowfoot Attachment

143408975
9970-115-497: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-237-5447
Pince Speciale

142375447
M15-010: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-337-0062
Spanner Wrench

143370062
PR1-47583: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-452-5234
Extracteur

144525234
D46375: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-450-6868
Jonc Darret Manchon

144506868
45056029: RNCC: 3 | RNVC: 2

16 Oct 1991

5120-14-256-4520

5120-14-353-0124
Cle A Creneaux

143530124
602900200140M1: RNCC: 3 | RNVC: 2
60290-02-00-140M1: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-365-9935
Outil Dintroduction

143659935
Y140-004: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-337-4937
Cle Speciale

143374937
NO PRIMARY REF14-337-4937: RNCC: 3 | RNVC: 2
000946-78: RNCC: 5 | RNVC: 9

7 Oct 1976

5120-14-427-1491
Socket Head Screw Key

144271491
6252-54296: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-385-3376
Spanner Wrench

143853376
365A93-3351-10: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-301-1456
Spanner Wrench

143011456
8810600128: RNCC: 3 | RNVC: 2
7M123EA: RNCC: 3 | RNVC: 2
C26-78: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-212-9127
Cle Speciale Outils

142129127
9970-115-218: RNCC: 3 | RNVC: 2
9970-115-218-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-237-4708
Douille Extraction

142374708
3130-95-68-009: RNCC: 3 | RNVC: 2
3130S95-68-009: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-439-3806
Torque Wrench Adapter

144393806
MHB534-23: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-404-4920
Montage Joint Outil

144044920
ST159-2M461-1A1: RNCC: 3 | RNVC: 2

12 Nov 1985

5120-14-488-3045
Pliers

144883045
NO PRIMARY REF14-488-3045: RNCC: 3 | RNVC: 2
387-20EG: RNCC: 5 | RNVC: 2
0172575: RNCC: 5 | RNVC: 2
3148511725757: RNCC: 5 | RNVC: 2
387.20EG: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-385-3436
Out Contro Jeu Dent

143853436
6803J32-2006-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-259-9271
Cle

142599271
M12-064: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-314-3684
Socket Wrench Screwdriver Attachment

143143684
0513820: RNCC: 3 | RNVC: 2
RS.6,5: RNCC: 5 | RNVC: 2
RS.6,5: RNCC: 5 | RNVC: 2
RS6-5: RNCC: 5 | RNVC: 2
3148515138201: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-315-1843
Mechanical Puller Attachment

143151843
0-51689-5: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-219-5563

5120-14-433-1297
Socket Wrench Socket

144331297
M4Z7101969601: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-475-3928
Socket Wrench Handle Bar

144753928
M412100A2704A02: RNCC: 3 | RNVC: 2

5 Apr 1995

5120-14-434-9252
Face Spanner Wrench Socket

144349252
3511 191 50311: RNCC: 3 | RNVC: 2

10 Oct 1989

5120-14-457-5823
Mechanical Puller Attachment

144575823
45057953: RNCC: 3 | RNVC: 2
45057953: RNCC: 5 | RNVC: 9

10 Sep 1992

5120-14-551-9968
Screwdriver Bit

145519968
61811311AA: RNCC: 3 | RNVC: 2

16 Nov 2006

5120-14-328-7948
Flat Tip Screwdriver

143287948
8810120041: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-552-9718
Socket Wrench Socket Set

145529718
40.J2PB: RNCC: 3 | RNVC: 2
3148515888267: RNCC: 5 | RNVC: 2

20 Feb 2007

5120-14-510-7160
Socket Wrench Screwdriver Attachment

145107160
SHP.7L: RNCC: 3 | RNVC: 2
0715 137 07: RNCC: 5 | RNVC: 2
SHP7L: RNCC: 5 | RNVC: 9

9 Nov 1998

5120-14-525-7974
Hand Screw Jack Extension Cap

145257974
F145569: RNCC: 3 | RNVC: 2

14 Jun 2001

5120-14-031-9131
Socket Wrench Adapter-Extension

140319131
NS219: RNCC: 3 | RNVC: 2
3148510432403: RNCC: 5 | RNVC: 2
0714 152 01: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-463-0049
Spanner Wrench

144630049
1444051: RNCC: 3 | RNVC: 2
1444051: RNCC: 5 | RNVC: 2

12 May 1993

5120-14-238-6651

5120-14-256-8113

5120-14-313-3026

5120-14-424-6735
Colonnette

144246735
906455: RNCC: 3 | RNVC: 2

2 Jun 1988

5120-14-247-3927
Ensemble De Sertiss

142473927
8459-131: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-353-2425
Open End Wrench

143532425
65-30-144-30-04-05: RNCC: 3 | RNVC: 2

8 Dec 1978

5120-14-343-9661
Open End Wrench

143439661
44-15X18: RNCC: 3 | RNVC: 2
33-15X18: RNCC: 5 | RNVC: 2
85-686-0364: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-349-8558
Open End Wrench

143498558
T60-7819: RNCC: 3 | RNVC: 2
7819: RNCC: 5 | RNVC: 2

14 Jun 1978

5120-14-338-2622
Electrical Contact Remover

143382622
OUT-DB-CAL12M: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-416-1471
Open End Wrench

144161471
10-11X13CM: RNCC: 3 | RNVC: 2
10-11X13C: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-217-2649
Spanner Wrench

142172649
M12-040: RNCC: 3 | RNVC: 2
M12040: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-042-0688
Socket Wrench Attachment Universal Joint

140420688
23720301: RNCC: 3 | RNVC: 2
14-23720301: RNCC: 5 | RNVC: 9

17 Dec 1976

5120-14-281-1953
Socket Wrench Socket

142811953
K15-16: RNCC: 3 | RNVC: 2
C15-16: RNCC: 3 | RNVC: 2
K15-16: RNCC: 3 | RNVC: 9
DEMK15-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-520-4892
Spanner Wrench

145204892
2P84450-00: RNCC: 3 | RNVC: 2

17 May 2000

144970086
0017141131: RNCC: 3 | RNVC: 2
F300 0T 022 5384: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-424-1155
Socket Head Screw Key

144241155
89.55: RNCC: 3 | RNVC: 2
89.55: RNCC: 5 | RNVC: 2
3148511268605: RNCC: 5 | RNVC: 2
1063845W00: RNCC: 5 | RNVC: 2
0695 177 963: RNCC: 5 | RNVC: 2
0126860: RNCC: 5 | RNVC: 9

17 May 1988

5120-14-283-1373
Spanner Wrench

142831373
T0120BBC5APL4: RNCC: 3 | RNVC: 2
301699T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-482-7532
Spanner Wrench

144827532
1104796D00: RNCC: 3 | RNVC: 2

25 Jul 1996

5120-14-431-4843
Socket Head Screw Key

144314843
M0FA403418: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-248-5166
Spanner Wrench

142485166
PR46349: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-385-3433
Bearing And Bushing Inserter

143853433
6803J32-1665-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-449-6833
Spanner Wrench

144496833
OUT-16MS17: RNCC: 3 | RNVC: 2

2 Sep 1991

5120-14-259-6283
Noix Darticulation

142596283
20514AFILETAGEDR0IT: RNCC: 3 | RNVC: 2
40677-10: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-413-5825
Socket Head Screw Key

144135825
803-5: RNCC: 3 | RNVC: 2
803-5: RNCC: 5 | RNVC: 2
80305: RNCC: 5 | RNVC: 2

17 Dec 1986

5120-14-255-9973
Cle Pour Vis De Cha

142559973
NO PRIMARY REF14-255-9973: RNCC: 3 | RNVC: 2
145J3: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-217-3645
Clef Reglage

142173645
NO PRIMARY REF14-217-3645: RNCC: 3 | RNVC: 2
225242: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-421-0779
Cle Speciale

144210779
6254-57022: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-376-6308
Pliers

143766308
NO PRIMARY REF14-376-6308: RNCC: 3 | RNVC: 2
2831-4: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-570-6341
Six Point Tip Screwdriver

145706341
TB-40X130: RNCC: 3 | RNVC: 2

12 Jan 2012

5120-14-272-7582
Spanner Wrench

142727582
D1553-4802: RNCC: 3 | RNVC: 2
D1553-4802: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-276-3148
Socket Wrench Socket

142763148
K50: RNCC: 3 | RNVC: 2
C-50: RNCC: 3 | RNVC: 2
C50: RNCC: 3 | RNVC: 2
K50: RNCC: 3 | RNVC: 9
3272670257481: RNCC: 5 | RNVC: 2
3130S95-68-096: RNCC: 5 | RNVC: 2
DEMK50: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-325-4034
Cle Speciale

143254034
2-15959: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-515-8108
Flat Tip Screwdriver

145158108
AY.6,5X200VE: RNCC: 3 | RNVC: 2
3148510128603: RNCC: 5 | RNVC: 2
AY.6,5X200VSE: RNCC: 5 | RNVC: 2
1063490D00: RNCC: 5 | RNVC: 2

6 Aug 1999

5120-14-551-2502
Combination Box And Open End Wrench

145512502
30-3,2: RNCC: 3 | RNVC: 2
30.3,2: RNCC: 3 | RNVC: 2

7 Sep 2006

5120-14-564-7647
Torque Wrench

145647647
62020913AA: RNCC: 3 | RNVC: 2

3 Jun 2010

5120-14-409-5131
Releve Cote Dispos

144095131
8813009000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-571-2896
Industrial Ser Body

145712896
5111LL: RNCC: 3 | RNVC: 2
5111LL 10CC: RNCC: 5 | RNVC: 2

9 Mar 2012

5120-14-452-6647
Verin Matoir

144526647
00SP3290J1: RNCC: 3 | RNVC: 2
OOSP3290J1: RNCC: 5 | RNVC: 2

15 Jan 1992

5120-14-214-1842
Bague De Montage

142141842
PR46032: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-343-8352

5120-14-323-4925
Pince Positionneur

143234925
8400-1610: RNCC: 3 | RNVC: 2
91547566: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-369-7343
Terminal Crimping Tool Contact Positioner

143697343
8400-1608: RNCC: 3 | RNVC: 2
91547564: RNCC: 3 | RNVC: 9
91547564: RNCC: 5 | RNVC: 2

17 Apr 1981

5120-14-389-8518
De Montag Outillage

143898518
M24-016: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-300-9626
Positionneur Elemen

143009626
341A93-3225-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-391-4269
Socket Head Screw Key

143914269
0124190: RNCC: 3 | RNVC: 2
83-19: RNCC: 5 | RNVC: 2
83.19: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-376-6019
Pliers

143766019
NO PRIMARY REF14-376-6019: RNCC: 3 | RNVC: 2
896: RNCC: 5 | RNVC: 2
E279F: RNCC: 5 | RNVC: 2

28 Apr 1982

5120-14-439-6236
Open End Wrench

144396236
6801G32-2442-00: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-366-4285
Orient Pince Vissee

143664285
A9101358: RNCC: 3 | RNVC: 2
A910-1358: RNCC: 5 | RNVC: 2

20 Nov 1980

5120-14-309-6531
Solid Center Punch

143096531
8-25: RNCC: 3 | RNVC: 2
256.2,5: RNCC: 3 | RNVC: 2
7409: RNCC: 5 | RNVC: 2
SYB0312: RNCC: 5 | RNVC: 2
256-2-5: RNCC: 5 | RNVC: 2
3148511606001: RNCC: 5 | RNVC: 2
702-1: RNCC: 5 | RNVC: 9
4440-2-5: RNCC: 5 | RNVC: 9
0160600: RNCC: 5 | RNVC: 9
P0INTEAU2-5MM: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-478-3820
Debouchoir Diam 6

144783820
10-690410-X: RNCC: 3 | RNVC: 2
85-695-4284: RNCC: 6 | RNVC: 9

25 Oct 1995

5120-14-290-8619
Tige De Guidage

142908619
NO PRIMARY REF14-290-8619: RNCC: 3 | RNVC: 2
157460: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-327-2332
Socket Head Screw Key

143272332
P250A1083: RNCC: 3 | RNVC: 2
P250A1083: RNCC: 5 | RNVC: 2
85-505-6012: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-338-4804
Cone De Montage

143384804
S16-0607-2251: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-263-6764
Cle Blocage Chambre

142636764
FH86-919: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-217-4915

5120-14-401-2762
Spanner Wrench

144012762
100585: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-347-0230
Spanner Wrench

143470230
C47854: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-276-4313
Spanner Wrench

142764313
80900-120: RNCC: 3 | RNVC: 2
78576-19: RNCC: 5 | RNVC: 2
85-598-4721: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-570-7626
Flat Tip Screwdriver

145707626
TB-3E100: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-442-5374
Open End Wrench

144425374
D1553-8037: RNCC: 3 | RNVC: 2
D1553-8037: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-379-0714
Mechanical Puller Attachment

143790714
365A93-3245-20: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-438-7694
Spanner Wrench

144387694
330A93-2011-20: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-479-0501
Cle Speciale

144790501
EMB-00236-001: RNCC: 3 | RNVC: 2

12 Dec 1995

5120-14-416-1375
Open End Wrench

144161375
10-13X15CM: RNCC: 3 | RNVC: 2
10-13X15C: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-217-9973
Cle Dynamometrique

142179973
D2-32: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-491-9352
Clet

144919352
229594J: RNCC: 3 | RNVC: 2
F300 0T 006 1225: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-225-5593
Extracteur De Clape

142255593
42158: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-225-0293

5120-14-268-0493
Corps De Rodoir

142680493
AN815: RNCC: 3 | RNVC: 2
98250187006: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-249-6938
Diamant

142496938
D35: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-490-8688
Meche

144908688
4057 020 003 469: RNCC: 3 | RNVC: 2
F300 0T 000 4926: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-215-3722

5120-14-407-1491
Open End Wrench

144071491
0102402: RNCC: 3 | RNVC: 2
44-14X16: RNCC: 5 | RNVC: 2
44.14X16: RNCC: 5 | RNVC: 2

12 Feb 1986

5120-14-411-5127
Open End Wrench

144115127
201561-00000: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-453-3698
Socket Head Screw Key

144533698
853-390-063-0: RNCC: 3 | RNVC: 2

19 Feb 1992

5120-14-338-4719
Tournevi Regla Lame

143384719
C46141-31: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-255-5132
Verin Hydraulique

142555132
321-97-0025: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-422-2334
Spanner Wrench

144222334
0436-01-127000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-526-1582
Face Spanner Wrench Socket

145261582
132416: RNCC: 3 | RNVC: 2

4 Jul 2001

5120-14-523-5457
Hydraulic Fitting Crimping Tool Head

145235457
DLT30PSHAS016: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-522-3831
Spanner Wrench

145223831
TC3124G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-525-5090
Socket Wrench Socket

145255090
5000260960: RNCC: 3 | RNVC: 2

6 Jun 2001

5120-14-377-9459
Open End Wrench

143779459
02240009500: RNCC: 3 | RNVC: 2
022400095: RNCC: 5 | RNVC: 2

10 Jun 1982

5120-14-440-2983
Screwdriver Bit Set And Handle

144402983
7368: RNCC: 3 | RNVC: 2
91638502: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-433-8467
Socket Head Screw Key

144338467
024707M: RNCC: 3 | RNVC: 2

16 Aug 1989

5120-14-422-2357
Mechanical Puller Attachment

144222357
0373-0U119561: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-388-9009
Detent Handling Tool

143889009
20181774: RNCC: 3 | RNVC: 2
20181774: RNCC: 5 | RNVC: 2

29 Nov 1983

5120-14-513-1452
Face Spanner Wrench Socket

145131452
0427653B00: RNCC: 3 | RNVC: 2

5 Mar 1999

5120-14-256-6895
Socket Wrench Handle

142566895
25790: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-295-6050
Torque Wrench Adapter

142956050
2FL: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-387-1199
Socket Wrench Handle Bar

143871199
GMN307707P0006: RNCC: 3 | RNVC: 2
VTR321-2-12004: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-214-1382
Detent Handling Tool

142141382
8810003082: RNCC: 3 | RNVC: 2
6-000-298: RNCC: 5 | RNVC: 2
881-0-003-082: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-315-5994
Flat Tip Screwdriver

143155994
AB.6,5X100: RNCC: 3 | RNVC: 2
AB6-5X100: RNCC: 5 | RNVC: 2
3148510030609: RNCC: 5 | RNVC: 2
190162: RNCC: 5 | RNVC: 2
130015: RNCC: 5 | RNVC: 9
0003060: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-574-4330
Bearing And Bushing Inserter And Remover

145744330
TM0417G001: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-14-491-0183
Cric

144910183
4602 007 700 022: RNCC: 3 | RNVC: 2
F300 0T 001 0972: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0181
Cric

144910181
4602 007 700 020: RNCC: 3 | RNVC: 2
F300 0T 001 0970: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-263-8836
Perche

142638836
17-9-1472: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-338-1760
Screwdriver Bit

143381760
NO PRIMARY REF14-338-1760: RNCC: 3 | RNVC: 2
0023946: RNCC: 5 | RNVC: 2
ENT.301/2: RNCC: 5 | RNVC: 2
ENT301/2: RNCC: 5 | RNVC: 2
1058376A00: RNCC: 5 | RNVC: 2
85-688-7868: RNCC: 6 | RNVC: 9

6 Nov 1976

5120-14-222-1430
Flat Tip Screwdriver

142221430
E74-351-1X6-5X150BAI0NNETTE: RNCC: 2 | RNVC: 2
AB.6,5X150: RNCC: 3 | RNVC: 2
FRP23: RNCC: 3 | RNVC: 2
91471035: RNCC: 5 | RNVC: 2
3148510030807: RNCC: 5 | RNVC: 2
AB6-5X150: RNCC: 5 | RNVC: 2
AB.6,5X150: RNCC: 5 | RNVC: 2
0003080: RNCC: 5 | RNVC: 9
AB6X100: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-325-3048
Wire Twister Pliers

143253048
ROBINSON 9: RNCC: 3 | RNVC: 2
R0BINS0N9: RNCC: 5 | RNVC: 9
R0BINS0N9P0UCES: RNCC: 5 | RNVC: 9
85-686-6553: RNCC: 6 | RNVC: 9
01-112-5031: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-423-2295
Basculeur Cle Dyn

144232295
0747170: RNCC: 3 | RNVC: 2
SP.1735 D-3-1190: RNCC: 5 | RNVC: 2
SP1735D-3-1190: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-513-4583
Pliers

145134583
NO PRIMARY REF14-513-4583: RNCC: 3 | RNVC: 2
NNP 5120868689080: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-236-6009

5120-14-242-3431

5120-14-216-8056

5120-14-566-8384
Pike Pole

145668384
49016075: RNCC: 3 | RNVC: 2

4 Jan 2011

5120-14-371-9907
Appareil De Levage

143719907
25545857600: RNCC: 3 | RNVC: 2
255458576: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-478-2774
Bearing And Bushing Remover

144782774
D05-0004: RNCC: 3 | RNVC: 2

18 Oct 1995

5120-14-402-7939
Bearing And Bushing Inserter

144027939
3210-97-31-007: RNCC: 3 | RNVC: 2
85-692-9448: RNCC: 6 | RNVC: 9

19 Jul 1985

5120-14-280-1699
Adjustable Wrench

142801699
E74321-150W: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-292-0791
Fourreau Telescopiq

142920791
NO PRIMARY REF14-292-0791: RNCC: 3 | RNVC: 2
BA57: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-330-8154
Spanner Wrench

143308154
NO PRIMARY REF14-330-8154: RNCC: 3 | RNVC: 2
1546W3: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-542-6112
Face Spanner Wrench Socket

145426112
8054091N00: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-248-7445
Joint Chargeur

142487445
G1-15-010: RNCC: 3 | RNVC: 2
G1-15010: RNCC: 5 | RNVC: 2
G1-15-010: RNCC: 5 | RNVC: 2
G1-15010: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-385-3337
Bearing And Bushing Inserter

143853337
365A93-3112-23: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-364-1521
Socket Head Screw Key

143641521
NO PRIMARY REF14-364-1521: RNCC: 3 | RNVC: 2
91714497: RNCC: 5 | RNVC: 2
82.1/8: RNCC: 5 | RNVC: 2
0123500: RNCC: 5 | RNVC: 2
82-1-8: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-321-1516
Open End Wrench

143211516
44.1'X1'1/16: RNCC: 3 | RNVC: 2
91369680: RNCC: 5 | RNVC: 2
44-1X1 1-16: RNCC: 5 | RNVC: 2
11-1X1 1-16: RNCC: 5 | RNVC: 2
3148511046715: RNCC: 5 | RNVC: 2
44 1X1 1-16CP: RNCC: 5 | RNVC: 9
0104670: RNCC: 5 | RNVC: 9
33-1X1 1-16: RNCC: 5 | RNVC: 9
44.1'X1'X1/16: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-508-8454
Flat Tip And Cross Tip Screwdriver Set

145088454
NO PRIMARY REF14-508-8454: RNCC: 3 | RNVC: 2
AJC.1: RNCC: 5 | RNVC: 2

30 Sep 1998

5120-14-530-3000
Socket Wrench Socket

145303000
S.11/16LA: RNCC: 3 | RNVC: 2
00.49.23.73: RNCC: 5 | RNVC: 2
3148510557250: RNCC: 5 | RNVC: 2

29 May 2002

5120-14-200-1405
Bearing And Bushing Inserter And Remover

142001405
8810007120: RNCC: 3 | RNVC: 2
881007120: RNCC: 3 | RNVC: 2
6-000-197: RNCC: 5 | RNVC: 2
6000197: RNCC: 5 | RNVC: 2
881-0-007-120: RNCC: 5 | RNVC: 2
0T2-2-12: RNCC: 5 | RNVC: 9
0T2-2-12: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-510-1077
Spanner Wrench

145101077
FIC92-73MT: RNCC: 3 | RNVC: 2
5120AA8006324: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-234-3359
Cle A Fourche

142343359
NO PRIMARY REF14-234-3359: RNCC: 3 | RNVC: 2
0A7: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-406-6215
Entrainement Cle

144066215
853-200-576-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-271-3221
Socket Head Screw Key

142713221
900121: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-314-8168
Electrical Contact Inserter

143148168
41932: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-446-4023
Open End Wrench

144464023
73941: RNCC: 3 | RNVC: 2

19 Mar 1991

5120-14-232-7990
Socket Head Screw Key

142327990
15137T8: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-457-4386
Socket Wrench Extension

144574386
45057766: RNCC: 3 | RNVC: 2
45057766: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-260-2329

5120-14-321-1383

5120-14-282-4729
Spanner Wrench

142824729
D151-2200: RNCC: 3 | RNVC: 2
D1512-2200: RNCC: 5 | RNVC: 2
D1512-2200: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-450-5249
Hand Armament Subsystem Carrier

144505249
325294-02: RNCC: 3 | RNVC: 2
325294-02: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-249-3935
Guide Axe

142493935
3210-95-37-030: RNCC: 3 | RNVC: 2
08-321: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-533-1931
Hand Terminal Crimping Tool

145331931
484641-1: RNCC: 3 | RNVC: 2

29 Jan 2003

5120-14-431-7939
Socket Head Screw Key

144317939
21027-5: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-406-5734
Speciale Cle

144065734
853-100-146-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-482-8783
Socket Head Screw Key

144828783
8-0117-4: RNCC: 3 | RNVC: 2
131213: RNCC: 5 | RNVC: 2
9689993052: RNCC: 5 | RNVC: 2

1 Aug 1996

5120-14-319-4061
Screwdriver Bit

143194061
0025008: RNCC: 3 | RNVC: 2
ET.101/8: RNCC: 5 | RNVC: 2
ET1-8: RNCC: 5 | RNVC: 2
NET1-8: RNCC: 5 | RNVC: 2
85-686-2139: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-488-3121
Socket Head Screw Key

144883121
82H.7/64: RNCC: 3 | RNVC: 2
0123481: RNCC: 5 | RNVC: 2
3148511234815: RNCC: 5 | RNVC: 2
82H7-64: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-348-7714
Cross Tip Screwdriver

143487714
NO PRIMARY REF14-348-7714: RNCC: 3 | RNVC: 2
257-2: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-14-271-6095

5120-14-264-8259
Spanner Wrench

142648259
NO PRIMARY REF14-264-8259: RNCC: 3 | RNVC: 2
1110: RNCC: 5 | RNVC: 9
A1110: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-298-3025

5120-14-518-3795
Spanner Wrench

145183795
TC3001P001: RNCC: 3 | RNVC: 2

2 Feb 2000

5120-14-446-4753
Mechanical Puller Adapter

144464753
8813998000: RNCC: 3 | RNVC: 2

20 Mar 1991

5120-14-530-9109
Open End Wrench

145309109
1105366D00: RNCC: 3 | RNVC: 2

17 Jul 2002

5120-14-445-0112
Sheet Metalworking Stake

144450112
853-930-110-0: RNCC: 3 | RNVC: 2

31 Jan 1991

5120-14-253-9545
Extracteur Special

142539545
DLT070955: RNCC: 3 | RNVC: 2
DLT070955: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-351-5953
Open End Wrench

143515953
001453050P: RNCC: 3 | RNVC: 2

12 Sep 1978

5120-14-448-8685
Socket Wrench Socket

144488685
K23HA: RNCC: 3 | RNVC: 2
3148510300078: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-502-8638
Handling Tool Arm

145028638
9R9139: RNCC: 3 | RNVC: 2

17 Dec 1997

5120-14-571-5225
Spanner Wrench

145715225
14100093626: RNCC: 3 | RNVC: 2

2 Apr 2012

5120-14-513-9479
Flat Tip Screwdriver

145139479
ENFD6560-2X12X250: RNCC: 3 | RNVC: 2

19 Apr 1999

5120-14-454-2613
Handling Tool Arm

144542613
J05085-02-0100P001: RNCC: 3 | RNVC: 2

26 Mar 1992

5120-14-272-3296
Open End Wrench

142723296
E74302C4-6WWF: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-396-4117
Pince De Retouche

143964117
6274-51005: RNCC: 3 | RNVC: 2
6274-2112220: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-550-5820
Socket Wrench Socket

145505820
270M121-00: RNCC: 3 | RNVC: 2

28 Jun 2006

5120-14-427-1485
Socket Head Screw Key

144271485
6252-54282: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-259-3308
Socket Wrench Spanner Attachment

142593308
253-5M362A4A: RNCC: 3 | RNVC: 2
RU253-5M362A4A: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-451-1208
Cle Speciale

144511208
258400: RNCC: 3 | RNVC: 2
258400: RNCC: 5 | RNVC: 9
85-694-2306: RNCC: 6 | RNVC: 9

30 Oct 1991

5120-14-428-0928
Open End Wrench

144280928
0102425: RNCC: 3 | RNVC: 2
44.18X21: RNCC: 3 | RNVC: 2
44-18X21: RNCC: 5 | RNVC: 2
44.18X21: RNCC: 5 | RNVC: 2

30 Nov 1988

5120-14-375-3672
Grattoir Double

143753672
1195-1: RNCC: 3 | RNVC: 2
89406068: RNCC: 5 | RNVC: 2
91593056: RNCC: 5 | RNVC: 2

26 Feb 1982

5120-14-498-0843
Wrench

144980843
NO PRIMARY REF14-498-0843: RNCC: 3 | RNVC: 2
2 694 800: RNCC: 5 | RNVC: 9
2 694 800: RNCC: 5 | RNVC: 9
F300 0T 002 6410: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-265-3212

5120-14-219-2213

5120-14-208-0973

5120-14-556-1565
Ratchet Wrench

145561565
MT23241311: RNCC: 3 | RNVC: 2

6 Feb 2008

5120-14-289-5547

5120-14-343-7857
De Centrage Obus

143437857
SMS266: RNCC: 3 | RNVC: 2
SMS266: RNCC: 5 | RNVC: 9

13 Jul 1977

5120-14-260-0369
Spanner Wrench

142600369
321-95-0045-00: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-415-7816
Aiguille Equipee

144157816
NO PRIMARY REF14-415-7816: RNCC: 3 | RNVC: 2
71190100000NW0B: RNCC: 5 | RNVC: 9

18 May 1987

5120-14-569-3777
Screw Thread Insert Inserter

145693777
TM-8: RNCC: 3 | RNVC: 2

8 Sep 2011

5120-14-501-0228
Cle Coudee

145010228
83H-27: RNCC: 3 | RNVC: 2
83H27: RNCC: 3 | RNVC: 2
3148511242513: RNCC: 5 | RNVC: 2
83H.27: RNCC: 5 | RNVC: 2
F300 0T 025 0526: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-370-6408

5120-14-454-1538
Screwdriver Bit

144541538
ES.134,5T: RNCC: 3 | RNVC: 2
3148510249865: RNCC: 5 | RNVC: 2
162-5953: RNCC: 5 | RNVC: 2
0614 175 652: RNCC: 5 | RNVC: 2
ES.134.5T: RNCC: 5 | RNVC: 2
0024986: RNCC: 5 | RNVC: 9
FACOMES.134,5T: RNCC: 5 | RNVC: 9

24 Mar 1992

5120-14-306-3518
Socket Wrench Handle

143063518
NO PRIMARY REF14-306-3518: RNCC: 3 | RNVC: 2
75S150: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-245-2340

5120-14-483-2208
Jet

144832208
330A98-2020-00: RNCC: 3 | RNVC: 2

28 Aug 1996

5120-14-565-1096
Socket Wrench Screwdriver Attachment

145651096
RAL-Q00011X00: RNCC: 3 | RNVC: 2

9 Jul 2010

5120-14-443-9696
Open End Wrench

144439696
GS125-09: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-378-6465
Outil Demontage Gou

143786465
20188814: RNCC: 3 | RNVC: 2
20188814: RNCC: 5 | RNVC: 9

11 Aug 1982

5120-14-332-0787
Socket Wrench Adapter

143320787
160-71960-37: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-215-9822
Cle A Tube

142159822
536-402-010DET14: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-307-8812
Preformed Packing Inserter

143078812
330A93-3109-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-201-3092
Dard

142013092
NO PRIMARY REF14-201-3092: RNCC: 3 | RNVC: 2
77: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-514-5523
Flat Tip Screwdriver

145145523
ENFD6563-1X5-5X300: RNCC: 3 | RNVC: 2

28 May 1999

5120-14-499-7663
Cle Antenne

144997663
2093-5641-54: RNCC: 3 | RNVC: 2
F300 0T 023 7566: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-316-1620
Appareil Bridag Rou

143161620
A127933: RNCC: 3 | RNVC: 2
100219: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-253-5833

5120-14-280-9839

5120-14-406-5683
Demontage Outil

144065683
853-201-259-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-260-0365
Guide Axe

142600365
321-95-0013: RNCC: 3 | RNVC: 2
08-383: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-438-6834
Projectile Holding Tool

144386834
321A95-0025-01: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-14-347-2983
Pliers

143472983
185.20CPE: RNCC: 3 | RNVC: 2
130269: RNCC: 5 | RNVC: 2
185-20CPE: RNCC: 5 | RNVC: 2
185-20CPY: RNCC: 5 | RNVC: 2
3148511422205: RNCC: 5 | RNVC: 2
RDBI: RNCC: 5 | RNVC: 2
91532933: RNCC: 5 | RNVC: 2
236-1032: RNCC: 5 | RNVC: 2
0714 01 59: RNCC: 5 | RNVC: 2
FACOM185-20CPY: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-272-7580
Spanner Wrench

142727580
D1553-4804: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-454-2947
Sertissag Outillage

144542947
MMG070-13: RNCC: 3 | RNVC: 2
MMG070-13: RNCC: 5 | RNVC: 2
85-694-7981: RNCC: 6 | RNVC: 9

26 Mar 1992

5120-14-245-1790
Cle A Ergots Specia

142451790
G1-15-289-111: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-207-5338

5120-14-552-6703
Socket Wrench Screwdriver Attachment Set

145526703
ST.40: RNCC: 3 | RNVC: 2
ST.40: RNCC: 5 | RNVC: 2
3148515188206: RNCC: 5 | RNVC: 2

23 Jan 2007

5120-14-539-2627
Mechanical Puller Body

145392627
T632G3007222: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-436-0179
Protectr Monte Join

144360179
RT30047: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-222-1421

5120-14-503-5412
Outil De Serrage

145035412
70230800: RNCC: 3 | RNVC: 2

20 Jan 1998

5120-14-424-1161
Six Point Tip Screwdriver

144241161
NO PRIMARY REF14-424-1161: RNCC: 3 | RNVC: 2
ACX.15: RNCC: 5 | RNVC: 2
3148510040998: RNCC: 5 | RNVC: 2
0004099: RNCC: 5 | RNVC: 9

17 May 1988

5120-14-513-4350
Socket Head Screw Key

145134350
NO PRIMARY REF14-513-4350: RNCC: 3 | RNVC: 2
NNP 5120860703275: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-286-2248
Open End Wrench

142862248
20.36: RNCC: 3 | RNVC: 2
20-36: RNCC: 5 | RNVC: 2
91327116: RNCC: 5 | RNVC: 2
0093760: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-255-6214
Cle A Ergots Specia

142556214
M16-019: RNCC: 3 | RNVC: 2
M16-019: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-437-3937
De Freinage Outil

144373937
853-202-901-0: RNCC: 3 | RNVC: 2

31 Jan 1990

5120-14-362-7880
Face Spanner Wrench Socket

143627880
239900-78: RNCC: 3 | RNVC: 2
TF10A32303: RNCC: 5 | RNVC: 2
85-688-4598: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-232-6791
Socket Wrench Attachment Universal Joint

142326791
A240: RNCC: 3 | RNVC: 2
V2-95-008: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-438-5063
Spring Inserter And Remover

144385063
J47979: RNCC: 3 | RNVC: 2
85-694-0780: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-501-7748
Bearing And Bushing Inserter And Remover

145017748
1X56 136 441: RNCC: 3 | RNVC: 2
1X56 136 441: RNCC: 5 | RNVC: 2

7 Nov 1997

5120-14-446-4022
Open End Wrench

144464022
73940: RNCC: 3 | RNVC: 2

19 Mar 1991

5120-14-392-9642
Cle A Bougie Levier

143929642
605747: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-281-2991
Cle A Creneaux Racc

142812991
C46942: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-253-6006
Extracteur Special

142536006
129632-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-420-1013
Mechanical Puller Gear Adapter

144201013
8813905001: RNCC: 3 | RNVC: 2

18 Nov 1987

5120-14-347-1221
Socket Wrench Socket

143471221
NS.13: RNCC: 3 | RNVC: 2
0714 13 05: RNCC: 5 | RNVC: 2
3148510420509: RNCC: 5 | RNVC: 2
NS13: RNCC: 5 | RNVC: 2
0042050: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-222-1645
Pince A Sertir Spec

142221645
703223: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-515-8697
Shock Type Wheel Stud Nut Wrench

145158697
521612: RNCC: 3 | RNVC: 2
SOG521612: RNCC: 5 | RNVC: 9

18 Aug 1999

5120-14-468-5212
Bearing And Bushing Inserter

144685212
45057468: RNCC: 3 | RNVC: 2
45057468: RNCC: 5 | RNVC: 9

3 Mar 1994

5120-14-215-0221
Appareil A Cintrer

142150221
NO PRIMARY REF14-215-0221: RNCC: 3 | RNVC: 2
31958-2: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-298-5361
Flat Tip Screwdriver

142985361
ABB7-5X40: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-345-5483
Open End Wrench

143455483
M2-016-10: RNCC: 3 | RNVC: 2
85-689-4989: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-349-4746
Outil D'installatio

143494746
M15519-20: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-316-6681
Pliers

143166681
HC658: RNCC: 3 | RNVC: 2
HC658: RNCC: 5 | RNVC: 1
85-101-2509: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-349-3251

5120-14-578-4852
Hand Hammer

145784852
0136400301: RNCC: 3 | RNVC: 2

3 Dec 2013

5120-14-231-9953
Mandrin Special

142319953
DAM: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-395-3432
Socket Wrench Screwdriver Attachment

143953432
0518900: RNCC: 3 | RNVC: 2
3148515189005: RNCC: 5 | RNVC: 2
ST.1/4: RNCC: 5 | RNVC: 2
ST1/4: RNCC: 5 | RNVC: 2

2 Oct 1984

5120-14-572-0337
Pliers

145720337
DM.34: RNCC: 3 | RNVC: 2

4 Jun 2012

5120-14-427-2088
Extracteur Etrier

144272088
46AM064-00-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-440-2922
Socket Head Screw Key

144402922
5000261499: RNCC: 3 | RNVC: 2
89414216: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-549-9634
Socket Wrench Handle

145499634
S.171: RNCC: 3 | RNVC: 2
S.171: RNCC: 5 | RNVC: 2
3148510569406: RNCC: 5 | RNVC: 2

19 May 2006

5120-14-291-1841
Socket Wrench Socket

142911841
0051220: RNCC: 3 | RNVC: 2
R.4L: RNCC: 5 | RNVC: 2
R4L: RNCC: 5 | RNVC: 2

1 Jan 1972

Load More Results