What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 98 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 98 of 110

5120-14-410-3468
Seal Inserter And Remover

144103468
8814482000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-361-8673
Retaining Ring Pliers

143618673
371-41: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-449-7238
Pliers

144497238
9689160178: RNCC: 3 | RNVC: 2
EF3290: RNCC: 5 | RNVC: 2
KDAW9995/21: RNCC: 5 | RNVC: 2
89231359: RNCC: 5 | RNVC: 2

4 Sep 1991

5120-14-220-0295
Open End Wrench

142200295
44-18X20: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-553-1811
Flat Tip Screwdriver

145531811
TB-55M100: RNCC: 3 | RNVC: 2

12 Mar 2007

5120-14-357-9982
Essais Montage

143579982
MKT043-05: RNCC: 3 | RNVC: 2
MKT043-05: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-388-5257
Open End Wrench

143885257
NO PRIMARY REF14-388-5257: RNCC: 3 | RNVC: 2
0909-696: RNCC: 5 | RNVC: 2
0909-696: RNCC: 5 | RNVC: 9

3 Nov 1983

5120-14-380-4697
Sect Blocage Etrier

143804697
525825: RNCC: 3 | RNVC: 2
00525825: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-575-8084
Box Wrench

145758084
TM3142G001: RNCC: 3 | RNVC: 2

3 May 2013

5120-14-357-2175

5120-14-329-9295
Screwdriver Bit

143299295
NO PRIMARY REF14-329-9295: RNCC: 3 | RNVC: 2
0024615: RNCC: 5 | RNVC: 2
ES.136,5: RNCC: 5 | RNVC: 2
ES136,5: RNCC: 5 | RNVC: 2
0237109L00: RNCC: 5 | RNVC: 2
ES136-5: RNCC: 5 | RNVC: 2
ES6-5: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-386-6795
Vir Cap Cle A Talon

143866795
853-100-060-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-549-6027
Socket Wrench Screwdriver Attachment

145496027
D.109-10: RNCC: 3 | RNVC: 2

20 Apr 2006

5120-14-205-8281
Pince A Couder Les

142058281
NO PRIMARY REF14-205-8281: RNCC: 3 | RNVC: 2
74658-13: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-428-5384
Support Bati

144285384
MKG3712201: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-570-3124
Mechanical Puller Attachment

145703124
UFA33142: RNCC: 3 | RNVC: 2

7 Dec 2011

5120-14-551-7226
Face Spanner Wrench Socket

145517226
SP.14283: RNCC: 3 | RNVC: 2
82139009: RNCC: 5 | RNVC: 2

19 Oct 2006

5120-14-402-4141
Vise Jaw Caps

144024141
H46687: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-384-6335
Electrical Card Extractor

143846335
16928992: RNCC: 3 | RNVC: 2
16928992: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-436-0219
Preformed Packing Inserter

144360219
806995: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-412-8212
Spanner Wrench

144128212
0481-200030: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-220-0289
Open End Wrench

142200289
3000109: RNCC: 3 | RNVC: 2
VIR3000109: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-383-1696
Combination Box And Open End Wrench Set

143831696
8810189000: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-228-5108
Spanner Wrench

142285108
3798: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-514-5781
Socket Wrench Socket

145145781
ENFD6476A26X45X54X24X100: RNCC: 3 | RNVC: 2

1 Jun 1999

5120-14-340-5509
Watch Balance Screw Screwdriver And Holder

143405509
01286074: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-220-5144
Cle Speciale

142205144
3160-95-12-450: RNCC: 3 | RNVC: 2
3160S95-12-450: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-203-6019
Piston Ring Compressor

142036019
582BISPL100-160-60: RNCC: 3 | RNVC: 9
MUL582BISPL100-160-60: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-359-1563
Outil Montage Lames

143591563
341A93-3309-00: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-241-1634
Poincon Connecteur

142411634
8459-103: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-297-7668
Cle De Rodage

142977668
6800-2099: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-298-1088
Ensemble De Montage

142981088
330A93-3104-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-416-7530
Fixation Support

144167530
537347: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-556-2484
Socket Wrench

145562484
46AM150: RNCC: 3 | RNVC: 2

15 Feb 2008

5120-14-574-3481
Face Spanner Wrench Socket

145743481
14100096161: RNCC: 3 | RNVC: 2

11 Jan 2013

5120-14-321-9998
Dispositif De Monta

143219998
579376: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-434-9233
Socket Head Screw Key

144349233
3511 191 84901: RNCC: 3 | RNVC: 2
3511 191 84901: RNCC: 5 | RNVC: 2

10 Oct 1989

5120-14-530-2067
Cross Tip Screwdriver

145302067
AZPE.2X175: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-537-9294
Combination Open End And Spanner Wrench

145379294
56940183AA: RNCC: 3 | RNVC: 2

8 Dec 2003

5120-14-417-0993
Spanner Wrench

144170993
523002: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-281-2949
Extracteur Piston S

142812949
C46808: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-274-7874
Offset Screwdriver

142747874
236P2: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-558-8047
Six Point Tip Screwdriver

145588047
775471: RNCC: 3 | RNVC: 2
ANXP6X50: RNCC: 3 | RNVC: 2
3148517754713: RNCC: 5 | RNVC: 2

6 Nov 2008

5120-14-410-0569
Controle Outillage

144100569
851-600-371-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-410-0568
Centrage Broche

144100568
851-931-146-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-569-9088
Spatula

145699088
NO PRIMARY REF 14-569-9088: RNCC: 3 | RNVC: 2
410908: RNCC: 5 | RNVC: 2

27 Oct 2011

5120-14-539-9825
Socket Wrench Socket

145399825
OCE91-113A-1: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-438-5016
Face Spanner Wrench Socket

144385016
37AM028: RNCC: 3 | RNVC: 2
85-694-0556: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-276-3109
Socket Wrench Socket

142763109
S23L: RNCC: 3 | RNVC: 2
SL-23: RNCC: 3 | RNVC: 2
SL23: RNCC: 3 | RNVC: 2
3272670261648: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-358-6465
Spanner Wrench

143586465
M31-125: RNCC: 3 | RNVC: 2
M31125: RNCC: 5 | RNVC: 2
M31-125: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-432-6377
Retaining Ring Pliers

144326377
475A.20: RNCC: 3 | RNVC: 2
3148511782118: RNCC: 5 | RNVC: 2
0242583N00: RNCC: 5 | RNVC: 2
475A-20: RNCC: 5 | RNVC: 2
0178211: RNCC: 5 | RNVC: 9
0178210: RNCC: 5 | RNVC: 9
475-20: RNCC: 5 | RNVC: 9

19 Jun 1989

5120-14-447-3449
Spanner Wrench

144473449
NO PRIMARY REF14-447-3449: RNCC: 3 | RNVC: 2
89280763: RNCC: 5 | RNVC: 2
300C92398: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-366-4286
Orient Pince Vissee

143664286
A9101359: RNCC: 3 | RNVC: 2
A910-1359: RNCC: 5 | RNVC: 2

20 Nov 1980

5120-14-245-1823

5120-14-530-9199
Socket Wrench Spanner Attachment Set

145309199
134120: RNCC: 3 | RNVC: 2
118.EC5: RNCC: 5 | RNVC: 2
3148511341209: RNCC: 5 | RNVC: 2

17 Jul 2002

5120-14-368-1970
Spanner Wrench

143681970
0408-52012: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-538-8800
Spanner Wrench

145388800
NGM0022030200430: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-531-6933
Spanner Wrench

145316933
SP.9164: RNCC: 3 | RNVC: 2

11 Sep 2002

5120-14-447-3442
Bearing And Bushing Inserter And Remover

144473442
60918646: RNCC: 3 | RNVC: 2
89280555: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-534-8681
Open End Wrench

145348681
SP.2004: RNCC: 3 | RNVC: 2
SYQ2576: RNCC: 5 | RNVC: 2

9 Apr 2003

5120-14-578-1875
Mechanical Puller Attachment

145781875
PAAE223310-PAAE223312-800 122: RNCC: 3 | RNVC: 2

7 Nov 2013

5120-14-346-0221
Spanner Wrench

143460221
7025: RNCC: 3 | RNVC: 2
85-800-6846: RNCC: 6 | RNVC: 9

5 Nov 1977

5120-14-262-9678
Open End Wrench

142629678
35-131355: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-286-6577
Spanner Wrench

142866577
MZ3-101: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-508-3604
Extracteur

145083604
4537408254: RNCC: 3 | RNVC: 2
45374008-254: RNCC: 5 | RNVC: 2

9 Sep 1998

5120-14-457-1418
Cle De Fouloir

144571418
NO PRIMARY REF14-457-1418: RNCC: 3 | RNVC: 2
TN1355-7129D: RNCC: 5 | RNVC: 9

12 Aug 1992

5120-14-264-9011
Quick Adjusting Screw Clamp

142649011
3225-20: RNCC: 3 | RNVC: 2
APA20: RNCC: 3 | RNVC: 2
2684-20: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-575-1684
Pipe Wrench

145751684
82026377000: RNCC: 3 | RNVC: 1

18 Mar 2013

5120-14-353-6387
Faux Mors

143536387
C47641: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-434-3570
Montage Demon Outil

144343570
6241: RNCC: 3 | RNVC: 2
547650: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-426-2375
Outil Montage Demon

144262375
1G4135B: RNCC: 3 | RNVC: 9

9 Aug 1988

5120-14-396-2235
Gap Fixati Cle Spec

143962235
199411: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-430-8225
Blocage Verrou

144308225
46376: RNCC: 3 | RNVC: 2

22 Mar 1989

5120-14-202-2898

5120-14-383-1642

5120-14-559-3950
Hand Hydraulic Jack

145593950
VT500.9/4P: RNCC: 3 | RNVC: 2

6 Jan 2009

5120-14-275-1679
Solid Center Punch

142751679
NO PRIMARY REF14-275-1679: RNCC: 3 | RNVC: 2
3CGF77-2: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-506-7674
De Formage Outil

145067674
043-01-01-009K1: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-233-6105
Poignee De Levage

142336105
0176-942003: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-488-3151
Cross Tip Screwdriver

144883151
ATHH.P1: RNCC: 3 | RNVC: 2
0011725: RNCC: 5 | RNVC: 2
3148510117256: RNCC: 5 | RNVC: 2
ATHHP1: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-236-8768
Spanner Wrench

142368768
0679-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-576-3180
Inserter And Remove

145763180
TM1273P001: RNCC: 3 | RNVC: 2

12 Jun 2013

5120-14-272-3724

5120-14-480-4013
Gabarit

144804013
231535: RNCC: 3 | RNVC: 2

7 Mar 1996

5120-14-438-4166
Boiti Reglage Outil

144384166
39093: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-247-2038

5120-14-499-0116
Cle

144990116
208-016-1: RNCC: 3 | RNVC: 2
825-99835: RNCC: 5 | RNVC: 2
F300 0T 015 5296: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-457-5492
Outillage Refrigera

144575492
24144: RNCC: 3 | RNVC: 2

10 Sep 1992

5120-14-343-8364

5120-14-273-3178

5120-14-273-3175

5120-14-575-3208
Spatula

145753208
231-2475: RNCC: 3 | RNVC: 2

27 Mar 2013

5120-14-466-9235
Open End Wrench

144669235
233177: RNCC: 3 | RNVC: 2
85-801-3106: RNCC: 6 | RNVC: 9

9 Dec 1993

5120-14-224-7871
Electrical Contact Remover

142247871
8400-446: RNCC: 3 | RNVC: 2
5M.8938.220.41: RNCC: 5 | RNVC: 2
5M8938-220-41: RNCC: 5 | RNVC: 2
8400-446: RNCC: 5 | RNVC: 2
91357210: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-517-8285
Open End Wrench

145178285
0102403: RNCC: 3 | RNVC: 2
44.14X17: RNCC: 3 | RNVC: 2
TA5006P011: RNCC: 5 | RNVC: 2
1780151417: RNCC: 5 | RNVC: 2
44-14X17: RNCC: 5 | RNVC: 2

13 Jan 2000

5120-14-352-0836
Bearing Staking Installation Tool

143520836
341A93-3128-21: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-385-6942
Cle Embout

143856942
2-33901: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-220-0296
Open End Wrench

142200296
3000141: RNCC: 3 | RNVC: 2
VIR3000141: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-264-9614
Spanner Wrench

142649614
0592-78: RNCC: 3 | RNVC: 2
RA592: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-272-3288
A Fourche Cle

5120-14-406-6524
Outil A Sertir

144066524
853-200-404-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-266-9335
Cle

142669335
25-404-348: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-407-3303
Joints Emmanche

144073303
853-201-385-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-513-1555
Screwdriver Bit

145131555
FD6515-C0C8X5-5: RNCC: 3 | RNVC: 2
FD6515C08X5-5: RNCC: 5 | RNVC: 2

8 Mar 1999

5120-14-562-5728
Torque Wrench

145625728
DYPR-50-0: RNCC: 3 | RNVC: 2

4 Nov 2009

5120-14-339-5484
Spanner Wrench

143395484
9970-115-586: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-262-9716
Cle Soudee Carree

142629716
6800-2107: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-508-8451
Module Ajustage

145088451
PB.MOD601: RNCC: 3 | RNVC: 2

30 Sep 1998

5120-14-235-3893

5120-14-565-4189
Socket Wrench Socket

145654189
NK.32A: RNCC: 3 | RNVC: 2
A210606000074: RNCC: 5 | RNVC: 2

17 Aug 2010

5120-14-220-5155
Outillage Pour Emma

142205155
3160-95-33-020: RNCC: 3 | RNVC: 2
3160S95-33-020: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-450-3775
Spanner Wrench

144503775
NO PRIMARY REF14-450-3775: RNCC: 3 | RNVC: 2
BL53970: RNCC: 5 | RNVC: 9

1 Oct 1991

5120-14-360-5638
Extracteur De Peau

143605638
1176-112D500: RNCC: 3 | RNVC: 2
0209939L00: RNCC: 5 | RNVC: 2
1176-112D500: RNCC: 5 | RNVC: 9

19 Dec 1979

5120-14-402-4119
Torque Wrench Adapter

144024119
MHD229-27: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-465-4222
Socket Head Screw Key Blade

144654222
NEX.45: RNCC: 3 | RNVC: 2

29 Sep 1993

5120-14-484-0125
Leveling-Support Jack

144840125
DAVIDDIA16HAUTEUR220MM: RNCC: 3 | RNVC: 2
DIA 16 HAUTEUR 200MM: RNCC: 5 | RNVC: 2

17 Oct 1996

5120-14-384-6313
Electrical Card Extractor

143846313
16928930: RNCC: 3 | RNVC: 2
16928930: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-347-0221
Face Spanner Wrench Socket

143470221
D47723: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-217-2707

5120-14-422-9258
Spanner Wrench

144229258
095256P: RNCC: 3 | RNVC: 2

24 Mar 1988

5120-14-240-5468

5120-14-366-7430
Socket Wrench Socket

143667430
NG.85: RNCC: 3 | RNVC: 2
NG85: RNCC: 5 | RNVC: 2
3148510349503: RNCC: 5 | RNVC: 2
0034950: RNCC: 5 | RNVC: 9

20 Nov 1980

5120-14-253-3676
Etrier De Jauge Pou

142533676
410227M: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-246-4377
Spanner Wrench

142464377
825681: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-360-8273
Pliers

143608273
188-20EL: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-462-6922
Open End Wrench

144626922
45057798: RNCC: 3 | RNVC: 2
45057798: RNCC: 5 | RNVC: 9

28 Apr 1993

5120-14-459-1624
Bearing And Bushing Remover

144591624
45056175: RNCC: 3 | RNVC: 2
45056175: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-422-3804
Flat Tip Screwdriver

144223804
352349: RNCC: 3 | RNVC: 2

3 Mar 1988

5120-14-561-2696
Special Purpose Combination Wrench

145612696
98F29003503000: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-559-6425
Seal Inserter

145596425
99346258: RNCC: 3 | RNVC: 2

4 Feb 2009

5120-14-393-8423
Spanner Wrench

143938423
007-29M1: RNCC: 3 | RNVC: 2

23 Jun 1984

5120-14-422-3808
Open End Wrench

144223808
352352: RNCC: 3 | RNVC: 2

3 Mar 1988

5120-14-527-5204
Screwdriver Bit

145275204
4610282720: RNCC: 3 | RNVC: 2

30 Oct 2001

5120-14-201-2191
Socket Wrench Extension

142012191
C210: RNCC: 3 | RNVC: 2
K210: RNCC: 3 | RNVC: 2
C-210: RNCC: 3 | RNVC: 2
C210: RNCC: 3 | RNVC: 2
VKS: RNCC: 3 | RNVC: 2
3272670228801: RNCC: 5 | RNVC: 2
DLT030550: RNCC: 5 | RNVC: 2
M4ZS460D8170: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-360-5254
Spanner Wrench

143605254
7062RURG29-17-5-41IN0XAMAGNETIQU: RNCC: 2 | RNVC: 2

23 Nov 1979

5120-14-478-3818
Flat Tip Screwdriver

144783818
10-690223-B: RNCC: 3 | RNVC: 2
85-695-4282: RNCC: 6 | RNVC: 9

25 Oct 1995

5120-14-262-5554
Guide Pour Montage

142625554
M0NT16898-4: RNCC: 3 | RNVC: 2
M0N16898-4: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-450-2308
Mechanical Puller Attachment

144502308
1-024-551: RNCC: 3 | RNVC: 2
45057859: RNCC: 5 | RNVC: 2

25 Sep 1991

5120-14-217-2642
Cle Ouverture Habit

142172642
M12-015: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-245-8169
Cle Speciale

142458169
E16826A: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-286-7849

5120-14-491-0041
Cle

144910041
4549 800 312 360: RNCC: 3 | RNVC: 2
F300 0T 001 0537: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-263-2671

5120-14-466-7519
Screwdriver Bit

144667519
EV1.9: RNCC: 3 | RNVC: 2
91747392: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-461-3671
Plaque Demontage

144613671
1X56-137-229: RNCC: 3 | RNVC: 2

9 Mar 1993

5120-14-572-6172
Telescoping Pole

145726172
332A92-1400-01: RNCC: 3 | RNVC: 2
332A92140001: RNCC: 5 | RNVC: 2

17 Jul 2012

5120-14-385-3417
Plaque Support Redu

143853417
6802P32-4003-02: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-286-7859

5120-14-205-0434
Main De Fer Pour Pa

142050434
DNAR470: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-419-2863
Mechanical Puller Attachment

144192863
540189: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-344-3875

5120-14-471-0967
Cle Mano Contact Bp

144710967
M4DZ7101951820: RNCC: 3 | RNVC: 2

27 Jul 1994

5120-14-565-4872
Socket Wrench Socket

145654872
899622: RNCC: 3 | RNVC: 2

24 Aug 2010

5120-14-381-2595
Degoujonneuse Corps

143812595
286A.PL: RNCC: 3 | RNVC: 2
286.PL: RNCC: 5 | RNVC: 2
286PL: RNCC: 5 | RNVC: 2
0695 344 761: RNCC: 5 | RNVC: 2
0165440: RNCC: 5 | RNVC: 2
3148511654705: RNCC: 5 | RNVC: 2
Z86PL: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-478-2780
Face Spanner Wrench Socket

144782780
2609-0201-001: RNCC: 3 | RNVC: 2

18 Oct 1995

5120-14-489-1714
Spanner Wrench

144891714
053W00-684731M: RNCC: 3 | RNVC: 2
0684731M00: RNCC: 5 | RNVC: 2

2 Jul 1997

5120-14-391-8131
Bague De Centrage

143918131
365A93-3214-21: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-444-4562
Open End Wrench

144444562
231445: RNCC: 3 | RNVC: 2
85-694-3559: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-484-9204
Serre Cable

144849204
365A91-0057-82: RNCC: 3 | RNVC: 2

12 Dec 1996

5120-14-396-4137
Empilage Outil

143964137
6274-51028: RNCC: 3 | RNVC: 2
6274-2810021: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-232-1223
Open End Wrench

142321223
35-15/64: RNCC: 3 | RNVC: 2
35 15-64: RNCC: 3 | RNVC: 2
3272670241305: RNCC: 5 | RNVC: 2
35 15-64X15-64: RNCC: 5 | RNVC: 9
12AG15-64: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-353-0125
Outil De Controle

143530125
602900200060C1: RNCC: 3 | RNVC: 2
60290-02-00-060C1: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-251-2350

5120-14-427-1206
Speciale Cle

144271206
540311: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-335-7673
Spanner Wrench

143357673
160-888624: RNCC: 3 | RNVC: 2

30 Jun 1976

5120-14-272-4049

5120-14-306-9696

5120-14-375-1762
Spanner Wrench

143751762
16380154: RNCC: 3 | RNVC: 2
16380154: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-233-6093

5120-14-534-9737
Cable Tie Installation Tool

145349737
47139581: RNCC: 3 | RNVC: 2

23 Apr 2003

5120-14-222-7142

5120-14-222-7134
Open End Wrench

142227134
34.1/4: RNCC: 3 | RNVC: 2
35 1-4: RNCC: 3 | RNVC: 2
35-1/4: RNCC: 3 | RNVC: 2
3272670209701: RNCC: 5 | RNVC: 2
3148510983400: RNCC: 5 | RNVC: 2
34 1-4: RNCC: 5 | RNVC: 2
34.1-4: RNCC: 5 | RNVC: 2
35 1-4X1-4: RNCC: 5 | RNVC: 9
0098340: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-425-9341
Mandrin Emmanchemen

144259341
640222: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-540-8480
Hand Water Closet Auger

145408480
2906 21: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-298-9212
Presse De Bourrelie

142989212
R9902601: RNCC: 3 | RNVC: 2
R990-26: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-347-4936
Flat Tip Screwdriver

143474936
16567611: RNCC: 3 | RNVC: 2
16567611: RNCC: 3 | RNVC: 9

1 Mar 1978

5120-14-256-8889
Spanner Wrench

142568889
9970-125-061: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-394-0586
Serrage Arbre Pince

143940586
NO PRIMARY REF14-394-0586: RNCC: 3 | RNVC: 2
L121AAV302-1: RNCC: 5 | RNVC: 9
85-692-6225: RNCC: 6 | RNVC: 9

23 Jun 1984

5120-14-395-7184

5120-14-413-5647
Cle A Rochet

144135647
8191-7WCARRE82: RNCC: 3 | RNVC: 2

17 Dec 1986

5120-14-393-8858
Jonc Guide

143938858
NO PRIMARY REF14-393-8858: RNCC: 3 | RNVC: 2
OU138118: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-240-0084
Poignee Amovible Ra

142400084
K0044BB15AREP7: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-326-9429

5120-14-560-8777
Flat Tip Screwdriver

145608777
A4X100VE: RNCC: 3 | RNVC: 2
3148517745919: RNCC: 5 | RNVC: 2

28 May 2009

5120-14-567-1816
Socket Wrench Socket Set

145671816
NS.550A: RNCC: 3 | RNVC: 2
3148517865099: RNCC: 5 | RNVC: 2
786509: RNCC: 5 | RNVC: 2

18 Feb 2011

5120-14-386-1606
Roule Support Socle

143861606
6801P33-6105-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-478-4237
Outil D'installatio

144784237
057-0617-00: RNCC: 3 | RNVC: 2
1113144N00: RNCC: 5 | RNVC: 2

31 Oct 1995

5120-14-239-6357

5120-14-234-4271
Corps De Rodoir

142344271
17895T1REP14: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-493-0084
Cle

144930084
4169 159 016 309: RNCC: 3 | RNVC: 2
F300 0T 009 4492: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-245-1814

5120-14-255-3851
Cle Speciale

142553851
10530: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-548-4476
Eta Base Pivotante

145484476
10426936: RNCC: 3 | RNVC: 2

18 Jan 2006

5120-14-432-3870
Outillage Mandrin

144323870
547918: RNCC: 3 | RNVC: 2
00547918: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-388-9180
Socket Wrench Socket

143889180
8810131008: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-488-3022
Socket Wrench Screwdriver Attachment

144883022
SHP.8L: RNCC: 3 | RNVC: 2
0058995: RNCC: 5 | RNVC: 2
3148510589954: RNCC: 5 | RNVC: 2
SHP8L: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-542-0795
Open End Wrench

145420795
R46618: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-397-4856
Terminal Crimping Tool Contact Positioner

143974856
73025005: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-531-4813
Socket Wrench Socket

145314813
0457687T00: RNCC: 3 | RNVC: 2

21 Aug 2002

5120-14-526-2043
Socket Head Screw Key

145262043
3148511268728: RNCC: 3 | RNVC: 2
89.15L: RNCC: 5 | RNVC: 2

11 Jul 2001

5120-14-261-7678
Socket Wrench Socket

142617678
R28019SMPIECEINTERMEDIAIRE: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-481-6017
Torque Wrench Adapter

144816017
422473: RNCC: 3 | RNVC: 2

16 May 1996

5120-14-503-4777
Electronic Component Inserter And Remover

145034777
45460063: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-541-0129
Mechanical Puller Body

145410129
MS1178-10-01: RNCC: 3 | RNVC: 2

5 May 2004

5120-14-431-2538
Screwdriver Bit

144312538
BNAE-3MM: RNCC: 3 | RNVC: 2
0228099E00: RNCC: 5 | RNVC: 2
BNAE-3MM: RNCC: 5 | RNVC: 9

12 Apr 1989

5120-14-246-0147
Flat Tip Screwdriver

142460147
M16-007: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-325-4760
Electrical Contact Inserter

143254760
8500-85: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-302-5055
Pressexa Emmancher

143025055
NO PRIMARY REF14-302-5055: RNCC: 3 | RNVC: 2
42-903-04-050: RNCC: 5 | RNVC: 9

21 Feb 1996

5120-14-516-7014
Hole Sheet Metal Holder

145167014
BCME3-2X17: RNCC: 3 | RNVC: 2
BCME3-2X17: RNCC: 5 | RNVC: 2

13 Oct 1999

5120-14-321-8452
Demonte Frein

143218452
8000024806: RNCC: 3 | RNVC: 2
9301: RNCC: 5 | RNVC: 2
85-686-2836: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-455-3989
Pliers

144553989
EREM20-140MM: RNCC: 3 | RNVC: 2
91453702: RNCC: 5 | RNVC: 2

21 May 1992

5120-14-577-6287
Screwdriver Bit

145776287
2T95908-00: RNCC: 3 | RNVC: 2

30 Sep 2013

5120-14-459-1633
Bearing Staking Installation Tool

144591633
45215112: RNCC: 3 | RNVC: 2
45215112: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-278-7839
Craftsman's Tweezers

142787839
154: RNCC: 3 | RNVC: 2
3148511387009: RNCC: 5 | RNVC: 2
0044621M00: RNCC: 5 | RNVC: 2
91463582: RNCC: 5 | RNVC: 2
130275: RNCC: 5 | RNVC: 2
0138700: RNCC: 5 | RNVC: 9
138700154: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-302-6711
Socket Wrench Socket

143026711
1768-26: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-503-4721
Electronic Component Inserter And Remover

145034721
40155059: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-313-5811
Socket Wrench Crowfoot Attachment

143135811
C47286: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-223-8238
Spanner Wrench

142238238
939BISBV4: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-383-8994

5120-14-363-7098
Fixa Soufflet Bague

143637098
160-888623-01: RNCC: 3 | RNVC: 2

6 Jul 1980

5120-14-276-3197
Socket Wrench Socket

142763197
S1 1-4: RNCC: 3 | RNVC: 2
S-1'1/4: RNCC: 3 | RNVC: 2
S1 1-4: RNCC: 3 | RNVC: 2
65L1 1-4: RNCC: 3 | RNVC: 2
S1 1-4: RNCC: 3 | RNVC: 9
3148510546407: RNCC: 5 | RNVC: 2
3272670216860: RNCC: 5 | RNVC: 2
SYQ5205: RNCC: 5 | RNVC: 2
75S1 1-4: RNCC: 5 | RNVC: 9
DEMS1 1-4: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-428-5378
Maintien Rondelle

144285378
MKG3262115: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-286-7812

5120-14-370-6706

5120-14-483-5078
Cle Ecrou Fusee Mra

144835078
332A93-3304-20: RNCC: 3 | RNVC: 2

18 Sep 1996

5120-14-366-0252
Bague Roult Support

143660252
NO PRIMARY REF14-366-0252: RNCC: 3 | RNVC: 2
42-25-04-064M1: RNCC: 5 | RNVC: 9

4 Nov 1980

5120-14-291-3458
Crochet De Montage

142913458
172122: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-281-7732

5120-14-412-3052
De Reglage Montage

144123052
098100: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-291-2383

5120-14-438-7766
Mechanical Puller Attachment

144387766
330A93-3037-20: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-447-3331
Open End Wrench

144473331
10-25X28-P: RNCC: 3 | RNVC: 2
10-25X28P: RNCC: 3 | RNVC: 2
10-25X28CP: RNCC: 5 | RNVC: 2
3272670209329: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-438-5071
Torque Wrench Adapter

144385071
MHN537-24: RNCC: 3 | RNVC: 2
85-694-2854: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-386-1585
Spanner Wrench

143861585
6801P32-1064-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-314-4301
Retaining Ring Pliers

143144301
0T7: RNCC: 3 | RNVC: 2
111385: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-363-0009
Open End Wrench

143630009
185882: RNCC: 3 | RNVC: 2

3 Apr 1980

5120-14-371-1574
Fixed Open End Wrench Set

143711574
31.JE6: RNCC: 3 | RNVC: 2
3148515278402: RNCC: 5 | RNVC: 2
31JE6: RNCC: 5 | RNVC: 2
0527840: RNCC: 5 | RNVC: 9

5 Jun 1981

5120-14-393-9405
Vise Jaw Caps

143939405
PR46263: RNCC: 3 | RNVC: 2
06C206: RNCC: 5 | RNVC: 2

23 Jun 1984

5120-14-354-6752
Demonte Machoire

143546752
25145029000: RNCC: 3 | RNVC: 2
251450290: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-332-1133

5120-14-465-9529
Appareil Rodage Che

144659529
75545913000: RNCC: 3 | RNVC: 2
104203-01: RNCC: 5 | RNVC: 2

21 Oct 1993

5120-14-427-2166
Extracteur Support

144272166
46AM096-01: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-483-8022
Socket Head Screw Key

144838022
6-0012-811: RNCC: 3 | RNVC: 2
8002718R00: RNCC: 5 | RNVC: 2

3 Oct 1996

5120-14-564-6087
Open End Wrench

145646087
618-E100-REP15: RNCC: 3 | RNVC: 2

11 May 2010

5120-14-373-4922
Douille De Guidage

143734922
215986: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-041-6955
Jeu Cles Articulees

140416955
8811309000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-289-8402

5120-14-516-2696
Spanner Wrench

145162696
TA5038P002: RNCC: 3 | RNVC: 2

15 Sep 1999

5120-14-264-9598
Spanner Wrench

142649598
0343-78: RNCC: 3 | RNVC: 2
RA343: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-533-0553
Spanner Wrench

145330553
394902000001: RNCC: 3 | RNVC: 2

21 Jan 2003

5120-14-451-7747
Brad Awl

144517747
540182: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-422-2443
Socket Wrench Spanner Attachment

144222443
0378-38195: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-241-4924

5120-14-284-6488
Spanner Wrench

142846488
88456: RNCC: 3 | RNVC: 2
0C3040: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-348-0791
Socket Head Screw Key

143480791
510433: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-304-4380
Spanner Wrench

143044380
8810400001: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-560-8784
Flat Tip Screwdriver

145608784
A6,5X150VE: RNCC: 3 | RNVC: 2
3148517746473: RNCC: 5 | RNVC: 2

28 May 2009

5120-14-490-9460
Raccord

144909460
4280 020 000 071: RNCC: 3 | RNVC: 2
F300 0T 000 7134: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-273-8694

5120-14-248-5651

5120-14-237-4714
Detent Handling Tool

142374714
3130S95-68-027: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-421-6358
Spanner Wrench

144216358
0372-42-10173: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-412-2421
Reglage Train Avant

144122421
110-411-08W26H: RNCC: 3 | RNVC: 2
85-692-5684: RNCC: 6 | RNVC: 9

8 Oct 1986

5120-14-570-4698
Box Wrench

145704698
30-3-8X7-16: RNCC: 3 | RNVC: 9

16 Dec 2011

5120-14-397-8659
Spanner Wrench

143978659
005651210P: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-465-4218
Socket Head Screw Key Blade

144654218
NEX.25: RNCC: 3 | RNVC: 2
0034050: RNCC: 3 | RNVC: 2

29 Sep 1993

5120-14-474-5774
Spanner Wrench

144745774
OU50435: RNCC: 3 | RNVC: 2

22 Feb 1995

5120-14-386-4850
Face Spanner Wrench Socket

143864850
H46200: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-493-2091
Bearing And Bushing Inserter And Remover

144932091
5000263015: RNCC: 3 | RNVC: 2
F300 0T 011 3466: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-220-0147
Open End Wrench

142200147
42A: RNCC: 3 | RNVC: 2
1102S: RNCC: 5 | RNVC: 9
1102: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-457-8444
Spanner Wrench

144578444
M4HZ7101946420: RNCC: 3 | RNVC: 2

24 Sep 1992

5120-14-368-9295
Open End Wrench

143689295
MUP5421: RNCC: 3 | RNVC: 2

10 Mar 1981

5120-14-207-5627
Manche Pour Gaffe

142075627
NO PRIMARY REF14-207-5627: RNCC: 3 | RNVC: 2
NAV8-110MANCHE: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-495-7501
Cle De 19

144957501
10253220: RNCC: 3 | RNVC: 2
F300 0T 019 9429: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-486-5671
Montage

144865671
RT21772: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-350-9894

5120-14-290-8544

5120-14-444-4567
Open End Wrench

144444567
231496: RNCC: 3 | RNVC: 2
85-694-3564: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-518-7413
Bearing And Bushing Inserter And Remover

145187413
3210-97-31-050-1: RNCC: 3 | RNVC: 2

16 Feb 2000

5120-14-522-0286
Socket Wrench Socket

145220286
OCE89-82F: RNCC: 3 | RNVC: 2
0CE89-82F: RNCC: 5 | RNVC: 2

29 Sep 2000

5120-14-507-2641
Socket Wrench Socket

145072641
AER331152: RNCC: 3 | RNVC: 2
AER331-152: RNCC: 5 | RNVC: 2

24 Jun 1998

5120-14-281-0022
Hand Terminal Crimping Tool

142810022
816-S-068: RNCC: 3 | RNVC: 2
06-7515-01: RNCC: 3 | RNVC: 9
06-7515-01: RNCC: 5 | RNVC: 2
816S068: RNCC: 5 | RNVC: 2
06-7515-01: RNCC: 5 | RNVC: 9
06-7852-01: RNCC: 5 | RNVC: 9
816S068: RNCC: 5 | RNVC: 9
06-7515-01: RNCC: 5 | RNVC: 9
06-7700-13: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-470-6822
Denudeur Thermique

144706822
NO PRIMARY REF14-470-6822: RNCC: 3 | RNVC: 2
PB-20: RNCC: 5 | RNVC: 2
91550906: RNCC: 5 | RNVC: 2
PB-20: RNCC: 5 | RNVC: 9

29 Jun 1994

5120-14-307-4723
Screwdriver Bit

143074723
506-10: RNCC: 3 | RNVC: 9
MUL506-10: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-040-1994
Spanner Wrench

140401994
NO PRIMARY REF14-040-1994: RNCC: 3 | RNVC: 2
BL43935: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-303-6432
Torque Wrench Adapter

143036432
D0-18: RNCC: 3 | RNVC: 2
D018: RNCC: 3 | RNVC: 2
D018: RNCC: 3 | RNVC: 2
3272670292017: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-319-7242
Mont Roue Engr Supp

143197242
NO PRIMARY REF14-319-7242: RNCC: 3 | RNVC: 2
42-903-04-025: RNCC: 5 | RNVC: 9

21 Feb 1996

5120-14-314-1320
Cle Speciale Flexib

143141320
213-23-265-050: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-479-0628
Face Spanner Wrench Socket

144790628
OCE82-16S: RNCC: 3 | RNVC: 2
1115955M00: RNCC: 5 | RNVC: 2

13 Dec 1995

5120-14-386-4878
Masse Continuite

143864878
SK20-30162: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-382-7621
Electrical Contact Inserter

143827621
809849: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-031-2023
Spanner Wrench

140312023
8810591001: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-337-5384
Fixed Open End Wrench Set

143375384
44.JE17: RNCC: 3 | RNVC: 2
0530240: RNCC: 5 | RNVC: 2
3148515302404: RNCC: 5 | RNVC: 2
44JE17: RNCC: 5 | RNVC: 2
1129851W00: RNCC: 5 | RNVC: 2
91355439: RNCC: 5 | RNVC: 2
44.JE17: RNCC: 5 | RNVC: 2
0529214: RNCC: 5 | RNVC: 9

7 Oct 1976

5120-14-552-7426
Cross Tip Screwdriver

145527426
ACZPH.4X200: RNCC: 3 | RNVC: 2
ACZPH.4X200: RNCC: 5 | RNVC: 2
3148516258526: RNCC: 5 | RNVC: 2

29 Jan 2007

5120-14-425-4247
Face Spanner Wrench Socket

144254247
0UT135: RNCC: 3 | RNVC: 2
OUT135: RNCC: 5 | RNVC: 2
1082076K00: RNCC: 5 | RNVC: 2

5 Jul 1988

5120-14-341-1475

5120-14-213-5203
Arrache Roulement

142135203
50736: RNCC: 3 | RNVC: 2
50736: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-270-9319

5120-14-284-4342
Cle Darmement

142844342
6106-1299: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-539-3146
Mechanical Puller Step Plate

145393146
T651G3002222: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-520-4985
Spanner Wrench

145204985
C04051104: RNCC: 3 | RNVC: 2
C04051104: RNCC: 5 | RNVC: 9

17 May 2000

5120-14-316-5610

5120-14-483-4480
D Reglage Outillage

144834480
K117226: RNCC: 3 | RNVC: 2

12 Sep 1996

5120-14-416-5000
Cliquet Ressort

144165000
1840-2: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-419-9418
Mechanical Puller Step Plate

144199418
537112: RNCC: 3 | RNVC: 2

10 Nov 1987

5120-14-323-1576
Electronic Equipment Alignment Tool

143231576
2028-40: RNCC: 3 | RNVC: 2
2028-40: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-362-7917

5120-14-265-3213

5120-14-246-2298

5120-14-388-9049
Outil Adaptation Bu

143889049
16741165: RNCC: 3 | RNVC: 2
16741165: RNCC: 5 | RNVC: 9

29 Nov 1983

5120-14-562-5229
Flat Tip And Cross Tip Screwdriver Set

145625229
AD.J8VE: RNCC: 3 | RNVC: 2
3148517868410: RNCC: 5 | RNVC: 2
786841: RNCC: 5 | RNVC: 2

2 Nov 2009

5120-14-245-1760
Cle Speciale

142451760
G1-15-695: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-309-7452
Socle Posit Manchon

143097452
341A98-2007-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-326-1739
Cle Dynamome Embout

143261739
2-74701: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-264-0601
Socket Head Screw Key

142640601
801W1-8: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-471-9705
Spanner Wrench

144719705
100675: RNCC: 3 | RNVC: 2
A132943-1: RNCC: 5 | RNVC: 2

28 Sep 1994

5120-14-403-8937
Embout Tour Douille

144038937
ST6 A ST19: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-442-5699
Socket Wrench Socket

144425699
GS66-9: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-14-329-6434
Obus De Centrage

143296434
MGM231-22: RNCC: 3 | RNVC: 2
MGM231-22: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-204-3037
Obus De Centrage

142043037
M3-040: RNCC: 3 | RNVC: 2
M3-040: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-306-3725
Couronne Extracteur

143063725
NO PRIMARY REF14-306-3725: RNCC: 3 | RNVC: 2
RT7328: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-261-4639

5120-14-223-7050

5120-14-362-4005
Pose Ressort Appar

143624005
095059: RNCC: 3 | RNVC: 2
095059A: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-243-9304

5120-14-527-5919
Torque Wrench Adapter

145275919
46AM147: RNCC: 3 | RNVC: 2

30 Oct 2001

5120-14-406-8052
Screw Thread Insert Inserter

144068052
01500720000: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-530-8326
Open End Wrench

145308326
13A18X21: RNCC: 3 | RNVC: 2
13A 18X21: RNCC: 5 | RNVC: 2

8 Jul 2002

5120-14-375-1788
Spanner Wrench

143751788
16380385: RNCC: 3 | RNVC: 2
16380385: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-498-6842
Tournevis

144986842
ARX10: RNCC: 3 | RNVC: 2
5000629432: RNCC: 3 | RNVC: 2
F300 0T 007 6646: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-427-1494
Outil De Centrage

144271494
6252-54320: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-276-2309
Spanner Wrench

142762309
A90573: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-373-4928
Mandrin Special

143734928
214978: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-311-5818
Adjustable Wrench

143115818
105-280: RNCC: 3 | RNVC: 2
3148511313404: RNCC: 5 | RNVC: 2
105.280: RNCC: 5 | RNVC: 9
106-280: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-431-4824
Socket Head Screw Key

144314824
0372-42-10161: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-420-2463
Outillage Montage

144202463
MONT99028482: RNCC: 3 | RNVC: 2
99028482: RNCC: 5 | RNVC: 2

25 Nov 1987

5120-14-031-6866

5120-14-392-0843
Couver Filt Extract

143920843
853-121-002-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-276-3188
Socket Wrench Socket

142763188
S19-32: RNCC: 3 | RNVC: 2
S-19/32: RNCC: 3 | RNVC: 2
S19-32: RNCC: 3 | RNVC: 2
65L19-32: RNCC: 3 | RNVC: 2
S19-32: RNCC: 3 | RNVC: 9
3148510543802: RNCC: 5 | RNVC: 2
3272670236905: RNCC: 5 | RNVC: 2
SYQ5201: RNCC: 5 | RNVC: 2
DEMS19-32: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-488-3118
Socket Head Screw Key

144883118
82H.5/16: RNCC: 3 | RNVC: 2
0123621: RNCC: 5 | RNVC: 2
3148511236215: RNCC: 5 | RNVC: 2
82H5-16: RNCC: 5 | RNVC: 2
0715 311 36: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-304-4462
Open End Wrench

143044462
09-11: RNCC: 3 | RNVC: 2
09-11: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-384-6359
Electrical Card Extractor

143846359
16928969: RNCC: 3 | RNVC: 2
16928969: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-458-3090
Bearing And Bushing Inserter And Remover

144583090
45056117: RNCC: 3 | RNVC: 2
45056117: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-379-0863
Mechanical Puller Attachment

143790863
8812337004: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-436-0260
Preformed Packing Inserter

144360260
RT30075: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-540-2884
Socket Head Screw Key

145402884
47086284: RNCC: 3 | RNVC: 2
47088284: RNCC: 5 | RNVC: 9

18 Mar 2004

5120-14-220-7900
Open End Wrench

142207900
RACD12: RNCC: 3 | RNVC: 2
RACD12: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-466-9849
Bung Wrench

144669849
CT023: RNCC: 3 | RNVC: 2

14 Dec 1993

5120-14-575-3231
Pliers

145753231
10636690: RNCC: 3 | RNVC: 1

27 Mar 2013

5120-14-239-9049

5120-14-374-6778

5120-14-427-1512
Pince Cloche

144271512
6814-58534: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-286-2229
Torque Wrench Adapter

142862229
20.11: RNCC: 3 | RNVC: 2
20-11: RNCC: 5 | RNVC: 2
3148510935102: RNCC: 5 | RNVC: 2
20.11: RNCC: 5 | RNVC: 2
0093510: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-528-0540
Socket Wrench Socket

145280540
NSB.24: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-303-9852
Retaining Ring Pliers

143039852
0146080: RNCC: 3 | RNVC: 2
199-34: RNCC: 5 | RNVC: 2
199.34: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-273-7529
Pliers

142737529
1504-12: RNCC: 5 | RNVC: 9
102: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-521-2373
Spanner Wrench

145212373
161907: RNCC: 3 | RNVC: 2
(241)AC853161907: RNCC: 8 | RNVC: 2
161907: RNCC: 8 | RNVC: 2

12 Jul 2000

5120-14-246-2310

5120-14-392-0530
Socket Wrench Socket

143920530
MHL283-22: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-280-9097
Spanner Wrench

142809097
33797: RNCC: 5 | RNVC: 2
Z970133: RNCC: 5 | RNVC: 2
Z51908: RNCC: 5 | RNVC: 2
Z51908: RNCC: 5 | RNVC: 9
85-598-3961: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-441-2153
Spanner Wrench

144412153
332A93-3502-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-042-3578
Pre-Sertissage Bloc

140423578
RMPS6F14X1-5M: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-250-8305
Screwdriver Bit

142508305
NO PRIMARY REF14-250-8305: RNCC: 3 | RNVC: 2
S261: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-291-8168

5120-14-241-1494
Chasse-Roulement

142411494
0710-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-385-6936
Cle De Serrage

143856936
2-33896: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-302-6529

5120-14-541-6786
Hand Material Handling Hook

145416786
12471545-9: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-391-6739
Torque Wrench Adapter

143916739
J.203E: RNCC: 3 | RNVC: 2
3148510288703: RNCC: 5 | RNVC: 2
J203E: RNCC: 5 | RNVC: 2
0028870: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-371-1975

5120-14-360-8589
Tournevis Special

143608589
DLP751600: RNCC: 3 | RNVC: 2
DLT056313: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-572-8450
Socket Wrench Socket

145728450
320020: RNCC: 3 | RNVC: 2
7612206014793: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-342-9259
Embout Outil Extrac

143429259
809773: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-344-0693

5120-14-344-3270
Verrou Aerofre Clef

143443270
30AM009: RNCC: 3 | RNVC: 2
30AM009: RNCC: 5 | RNVC: 2

10 Aug 1977

5120-14-241-6046
Bloc De Presertissa

142416046
RPS14K: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-334-8139

5120-14-375-3211
Jauge Extracteur

143753211
A33285E: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-447-3399
Cross Tip Screwdriver Set

144473399
NO PRIMARY REF14-447-3399: RNCC: 3 | RNVC: 2
ATHH.P J4: RNCC: 5 | RNVC: 2
ATHHPJ4: RNCC: 5 | RNVC: 2
91714537: RNCC: 5 | RNVC: 2
0500717: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-281-1957
Socket Wrench Socket

142811957
S-1'1/16: RNCC: 3 | RNVC: 2
S1-1-16: RNCC: 3 | RNVC: 2
S1 1-16: RNCC: 3 | RNVC: 2
S1 1-16: RNCC: 3 | RNVC: 9
3272670268760: RNCC: 5 | RNVC: 2
SYQ5204: RNCC: 5 | RNVC: 2
S1 1-16: RNCC: 5 | RNVC: 2
DEMS1 1-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-496-3091
Jeweler's Poising Tool

144963091
EL62-1-18: RNCC: 3 | RNVC: 2
F300 0T 021 3767: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-444-7557
Manchon Extraction

144447557
NO PRIMARY REF14-444-7557: RNCC: 3 | RNVC: 2
VTR251-2P-1024: RNCC: 5 | RNVC: 9

21 Jan 1991

5120-14-202-2410
Spanner Wrench

142022410
NO PRIMARY REF14-202-2410: RNCC: 3 | RNVC: 2
7597: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-347-1344
Outil De Rivetage

143471344
NO PRIMARY REF14-347-1344: RNCC: 3 | RNVC: 2
0U109314: RNCC: 5 | RNVC: 9
85-800-5637: RNCC: 6 | RNVC: 9

19 Jan 1978

5120-14-396-1198
Tas Pour Mandrin

143961198
219909: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-444-8290
Cle De Serrage

144448290
0478-203120: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-566-3825
Socket Wrench Extension

145663825
730010S160-01C: RNCC: 3 | RNVC: 2

9 Nov 2010

5120-14-523-4018
Bearing And Bushing Remover

145234018
888-356-900-2: RNCC: 3 | RNVC: 2

17 Jan 2001

5120-14-514-2271
Handling Tool Arm

145142271
A05555-21-2100: RNCC: 3 | RNVC: 2
J05555-21-0900: RNCC: 5 | RNVC: 9
J05555-21-1000: RNCC: 5 | RNVC: 9
91MM176V0320A: RNCC: 6 | RNVC: 9

30 Apr 1999

5120-14-450-5327
Dashpot Handling Tool

144505327
255176-02: RNCC: 3 | RNVC: 2
255176-02: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-253-9391
Extracteur Pour Sie

142539391
NO PRIMARY REF14-253-9391: RNCC: 3 | RNVC: 2
23511: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-342-8780
Quick Adjusting Screw Clamp

143428780
20-120: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-447-3454
Flat Tip Screwdriver

144473454
NO PRIMARY REF14-447-3454: RNCC: 3 | RNVC: 2
0005738: RNCC: 5 | RNVC: 2
AG8EX250: RNCC: 5 | RNVC: 2
AG.8EX250: RNCC: 5 | RNVC: 2
91714857: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-216-7877
Open End Wrench

142167877
44.1'3/16X1'5/16: RNCC: 3 | RNVC: 2
0104750: RNCC: 5 | RNVC: 2
3148511047514: RNCC: 5 | RNVC: 2
33-1-3-16-1-5-16: RNCC: 5 | RNVC: 2
44 1 3-16X1 5-16CP: RNCC: 5 | RNVC: 2
44-1 3-16X1 5-16: RNCC: 5 | RNVC: 2
44-1-3-16X1-5-16CP: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-520-9923
Straight And Offset Cross Tip Screwdriver Set

145209923
AMZ.1: RNCC: 3 | RNVC: 2

28 Jun 2000

5120-14-461-6886
Socket Head Screw Key

144616886
0125635: RNCC: 3 | RNVC: 2
84T.3: RNCC: 5 | RNVC: 2
91739902: RNCC: 5 | RNVC: 2

22 Mar 1993

5120-14-564-2883
Hand Hammer

145642883
202H.2: RNCC: 3 | RNVC: 2
752464: RNCC: 5 | RNVC: 2

21 Apr 2010

5120-14-284-1947
Desaxeur Cle A Doui

142841947
NG234: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-223-5312

5120-14-278-4620
Extracteur Projecti

142784620
2339: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-423-7887
Collage Outillage

144237887
62-01-156A101262A: RNCC: 3 | RNVC: 2
6201-156A101262A: RNCC: 5 | RNVC: 2

28 Apr 1988

5120-14-376-2290
Mechanical Puller Attachment

143762290
NO PRIMARY REF14-376-2290: RNCC: 3 | RNVC: 2
0U133376: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-516-9011
Combination Box And Open End Wrench

145169011
39.3/16H: RNCC: 3 | RNVC: 2

20 Oct 1999

5120-14-308-9243
Spanner Wrench

143089243
188447: RNCC: 3 | RNVC: 2
20-0484: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-293-3052

5120-14-565-4612
Aligning Punch Set

145654612
885686: RNCC: 3 | RNVC: 2

19 Aug 2010

5120-14-413-0013
Extracteur Chemise

144130013
26-16-80A: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-574-5221
Detent Release Tool

145745221
ARM01-55: RNCC: 3 | RNVC: 2

25 Jan 2013

5120-14-475-4418
Jeweler's Friction Jeweling Tool

144754418
NO PRIMARY REF14-475-4418: RNCC: 3 | RNVC: 2
330-142D: RNCC: 5 | RNVC: 9
5285D: RNCC: 5 | RNVC: 9
85-693-7911: RNCC: 6 | RNVC: 9

5 Apr 1995

5120-14-505-9254
Flat Tip Screwdriver

145059254
ENFD6514-A1-2X6-5X150X265: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-370-3289
Mandrin Guid Soupap

143703289
5000261111: RNCC: 3 | RNVC: 2
5000261111: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-248-3514

5120-14-249-5509

5120-14-329-2783

5120-14-449-4266
Open End Wrench

144494266
957470-3: RNCC: 3 | RNVC: 2

13 Aug 1991

5120-14-278-2999
Cle Speciale

142782999
24545855500: RNCC: 3 | RNVC: 2
420584: RNCC: 5 | RNVC: 2
24545840200: RNCC: 5 | RNVC: 2
145J402: RNCC: 5 | RNVC: 9
145J555: RNCC: 5 | RNVC: 9
245458402: RNCC: 5 | RNVC: 9
24545840200: RNCC: 5 | RNVC: 9
245458555: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-337-0926
Typewriter Repair Pliers

143370926
16401659: RNCC: 3 | RNVC: 2
160-207-16401659: RNCC: 5 | RNVC: 2
16401659-9: RNCC: 5 | RNVC: 2
HK1-123: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-214-1384
Cle De Blocage

142141384
8810026000: RNCC: 3 | RNVC: 2
6-10-120-0: RNCC: 5 | RNVC: 2
881-0-026-000: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-200-9154
Open End Wrench

142009154
E74302C16-19AGK: RNCC: 2 | RNVC: 2
1839: RNCC: 3 | RNVC: 2
3-16X19: RNCC: 3 | RNVC: 2
8524736: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-521-7614
Cle A Crenaux

145217614
2P84541-00: RNCC: 3 | RNVC: 2

13 Sep 2000

5120-14-325-4832
Cone De Montage

143254832
S16-0607-1320: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-320-9454
Retaining Ring Pliers

143209454
3309-016: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-360-6419
Flat Tip Screwdriver

143606419
T010X10X200: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-576-3081
Mechanical Puller S

145763081
8811736001: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-389-3041
Cle De Deverrouilla

143893041
2-22183: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-478-5858
Outil Dextraction

144785858
0-0482325-1: RNCC: 3 | RNVC: 2
482325-1: RNCC: 5 | RNVC: 2

8 Nov 1995

5120-14-447-3388
Nez De Presse

144473388
45057731: RNCC: 3 | RNVC: 2
45057731: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-252-0524

5120-14-294-4074
Defreinoir Coude

142944074
8810120026: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-285-1229

5120-14-234-3686
Bague Pour Montage

142343686
202419: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-505-9356
Flat Tip Screwdriver

145059356
ENFD6516-A0-8X4X125X220: RNCC: 3 | RNVC: 2
F300 0P 000 1293: RNCC: 5 | RNVC: 2

30 Mar 1998

5120-14-486-5603
Outillage De C

144865603
RT13633: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-385-9828
Spanner Wrench

143859828
0.411/60151: RNCC: 3 | RNVC: 2
0411-60151: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-238-7375

5120-14-370-1233
Cale A Poncer

143701233
CALEAPONCER: RNCC: 3 | RNVC: 2
130547: RNCC: 5 | RNVC: 2
C0P2885: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-454-1449
Dispositif Blocage

144541449
VTR251-2-1070T+10701+10704+1071-: RNCC: 3 | RNVC: 1

21 Mar 1992

5120-14-540-1720
Hand Terminal Crimping Tool

145401720
450.6: RNCC: 3 | RNVC: 2
3148516422491: RNCC: 5 | RNVC: 2

11 Mar 2004

5120-14-219-2157

5120-14-298-2661

5120-14-491-3875
Cle

144913875
79-22: RNCC: 3 | RNVC: 2
F300 0T 002 6728: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-272-7917
Open End Wrench

142727917
LFP54-67-608: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-378-5103
Mechanical Puller Attachment

143785103
365A93-3110-22: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-406-6145
Face Spanner Wrench Socket

144066145
853-201-118-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-327-2930
Socket Head Screw Key

143272930
801-1: RNCC: 3 | RNVC: 2
85-679-5430: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-408-7308
Screwdriver Bit Holder

144087308
M31-100: RNCC: 3 | RNVC: 2
M31100: RNCC: 5 | RNVC: 2

2 Apr 1986

5120-14-222-6196
Socket Wrench Socket

142226196
S9-16KK: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-212-9138
Cle Speciale Outils

142129138
9970-115-183-01: RNCC: 3 | RNVC: 2
9970-115-183: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-247-9662
Open End Wrench

142479662
RT20926: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-504-0795
Retaining Ring Installation Tool

145040795
7349B: RNCC: 3 | RNVC: 2

5 Feb 1998

5120-14-505-9395
Flat Tip Screwdriver

145059395
ENFD6516-A1-2X6-5X150X265: RNCC: 3 | RNVC: 2
F300 0P 000 1298: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-491-3869
Open End Wrench

144913869
45-30: RNCC: 3 | RNVC: 2
3148511051306: RNCC: 5 | RNVC: 2
F300 0T 002 6720: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-460-7056
Bearing And Bushing Inserter And Remover

144607056
45057900: RNCC: 3 | RNVC: 2
45057900: RNCC: 5 | RNVC: 9

4 Feb 1993

5120-14-445-5392
Mechanical Puller Attachment

144455392
39442577: RNCC: 3 | RNVC: 2

14 Feb 1991

5120-14-463-7669
Face Spanner Wrench Socket

144637669
428392Y: RNCC: 3 | RNVC: 2
M35734: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-525-2685
Socket Wrench Extension

145252685
10527200: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-219-2220

5120-14-219-2210
Adaptateur Special

142192210
PR47126: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-334-8141

5120-14-232-6801

5120-14-406-6548
Emmanchement Outil

144066548
853-200-807-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-251-1130
Cle A Ergot

142511130
202411: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-387-1648
Mandrin De Pose

143871648
098079-2: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-434-3447
Face Spanner Wrench Socket

144343447
203280: RNCC: 3 | RNVC: 2
203280: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-459-1593
Bearing Staking Installation Tool

144591593
45056079: RNCC: 3 | RNVC: 2
45056079: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-242-2659
Spanner Wrench

142422659
51701: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-303-7084
Flat Tip Screwdriver

143037084
ATHH.8X150: RNCC: 3 | RNVC: 2
369643: RNCC: 5 | RNVC: 2
3148510118604: RNCC: 5 | RNVC: 2
ATHH8X150: RNCC: 5 | RNVC: 2
0011860: RNCC: 5 | RNVC: 9
ATHH150: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-440-6794
Mechanical Puller Attachment

144406794
332A93-3604-12: RNCC: 3 | RNVC: 2

18 Jul 1990

5120-14-462-1929
Leveling-Support Jack Set

144621929
952-01-03-00: RNCC: 3 | RNVC: 2

14 Apr 1993

5120-14-214-2826
Cle En Bout Special

142142826
9970-115-225: RNCC: 3 | RNVC: 2
9970-115-225-01: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-298-4537
Socket Head Screw Key

142984537
0125200: RNCC: 3 | RNVC: 2
84 5-64: RNCC: 5 | RNVC: 2
84.5/64: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-321-5491

5120-14-420-7201
Cle Speciale

144207201
6224-28920: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-042-5678
Electrical Contact Remover

140425678
8522-56: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-537-4633
Pliers

145374633
193E.16CPE: RNCC: 3 | RNVC: 2
1072012R00: RNCC: 5 | RNVC: 2

3 Nov 2003

5120-14-541-1854
Retaining Ring Pliers

145411854
0587585: RNCC: 3 | RNVC: 2

18 May 2004

5120-14-351-2143
Spanner Wrench

143512143
489410S: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-041-8334
Female Electrical Contact Resizing Tool

140418334
80863: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-526-2699
Retaining Ring Pliers

145262699
3148511394632: RNCC: 3 | RNVC: 2
169E.23: RNCC: 5 | RNVC: 2
MO003075: RNCC: 6 | RNVC: 9

13 Jul 2001

5120-14-463-7596
Cross Tip Screwdriver

144637596
AD.1X75: RNCC: 3 | RNVC: 2
3148510043012: RNCC: 5 | RNVC: 2
0184471A00: RNCC: 5 | RNVC: 2
SYQ0735: RNCC: 5 | RNVC: 2
0004301: RNCC: 5 | RNVC: 9

28 Jun 1993

5120-14-405-2257
Electrical Card Extractor

144052257
1900250000: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-375-3098
Spanner Wrench

143753098
CRAR980: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-536-3677
Socket Head Screw Key

145363677
47211077: RNCC: 3 | RNVC: 2

29 Jul 2003

5120-14-299-4505

5120-14-280-1396

Load More Results