What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 96 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 96 of 110

5120-14-041-4858
Offset Screwdriver

140414858
N418-02A: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-219-0001
Crochet De Degageme

142190001
NO PRIMARY REF14-219-0001: RNCC: 3 | RNVC: 2
22994-1: RNCC: 5 | RNVC: 9
22994-1: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-558-5120
Mechanical Puller

145585120
888-442-803-0: RNCC: 3 | RNVC: 2

9 Oct 2008

5120-14-201-5526
Poincon A Chev Lame

142015526
NO PRIMARY REF14-201-5526: RNCC: 3 | RNVC: 2
109-8: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-569-6413
Piston Inserter

145696413
M14101: RNCC: 3 | RNVC: 2

7 Oct 2011

5120-14-576-6134
Inserter And Remove

145766134
8810546403: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-424-3327
Valise Maintenance

144243327
96101492: RNCC: 3 | RNVC: 2

19 May 1988

5120-14-390-4852
Poulie Graduee

143904852
DLP751690: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-217-2679
Obus Pour Axe

142172679
SMS96: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-263-8166

5120-14-271-3667

5120-14-237-9821
Spanner Wrench

142379821
P02413: RNCC: 3 | RNVC: 2
0000330446: RNCC: 5 | RNVC: 2
0000330446: RNCC: 5 | RNVC: 9
330446: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-376-0154
Craftsman's Tweezers

143760154
140.AA: RNCC: 3 | RNVC: 2
140.AA: RNCC: 5 | RNVC: 2
140AA: RNCC: 5 | RNVC: 2
3148511375006: RNCC: 5 | RNVC: 2
1011868E00: RNCC: 5 | RNVC: 2
91538315: RNCC: 5 | RNVC: 2
0137500: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-548-9343
Pliers

145489343
96150565: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-453-0858
Outillage

144530858
NAVTG1: RNCC: 3 | RNVC: 2

4 Feb 1992

5120-14-444-7596
Cle De Serrage

144447596
0478-200009: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-241-3408
Poignee Pour Fraise

142413408
S16-0122-0600: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-373-0029
Cle Effacement

143730029
21308221: RNCC: 3 | RNVC: 2
85-691-7983: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-498-3387
Cle

144983387
91954402: RNCC: 3 | RNVC: 2
0438-01-615000: RNCC: 3 | RNVC: 2
F300 0T 004 8261: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-322-7442
Cles Male Et Ergots

143227442
73101-01-30-02BREP3: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-347-5041
Electrical Contact Remover

143475041
816-S-026: RNCC: 3 | RNVC: 2
816S026: RNCC: 5 | RNVC: 2
91389003: RNCC: 5 | RNVC: 2

1 Mar 1978

5120-14-446-8986
Torque Wrench Adapter

144468986
11.30: RNCC: 3 | RNVC: 2
11-30: RNCC: 5 | RNVC: 2
3148510927404: RNCC: 5 | RNVC: 2
0240643L00: RNCC: 5 | RNVC: 2
91627912: RNCC: 5 | RNVC: 2
0092740: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-338-4725
Contre Cle

143384725
C46357-11: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-361-6611

5120-14-563-7342
Open End Wrench

145637342
46117073: RNCC: 3 | RNVC: 2

9 Mar 2010

5120-14-220-0520
Extracteur Axe De F

142200520
MS236: RNCC: 3 | RNVC: 2
MS236: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-459-1631
Bearing And Bushing Remover

144591631
45215108: RNCC: 3 | RNVC: 2
45215108: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-449-7309
Mechanical Puller Attachment

144497309
F117ACMU41GL: RNCC: 3 | RNVC: 2
45057839: RNCC: 5 | RNVC: 2

4 Sep 1991

5120-14-229-8552
Spanner Wrench

142298552
959251A: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-296-5487
Screw Thread Insert Inserter

142965487
01500280700: RNCC: 3 | RNVC: 2
32041420: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-295-0083
Hand Terminal Crimping Tool

142950083
NO PRIMARY REF14-295-0083: RNCC: 3 | RNVC: 2
0-1848: RNCC: 5 | RNVC: 2
01814760: RNCC: 5 | RNVC: 9
01848: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-321-7735
Spanner Wrench

143217735
RT12356: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-577-6342
Socket Wrench Socket

145776342
2T93162-01: RNCC: 3 | RNVC: 2

1 Oct 2013

5120-14-326-2703
Contre Cle

143262703
330A93-3011-00: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-301-7935
Spanner Wrench

143017935
NO PRIMARY REF14-301-7935: RNCC: 3 | RNVC: 2
B4C309684: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-276-3175
Socket Wrench Socket

142763175
S7-16L: RNCC: 3 | RNVC: 2
SL7-16: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-315-5989
Socket Head Screw Key

143155989
0124110: RNCC: 3 | RNVC: 2
83-11: RNCC: 5 | RNVC: 2
83.11: RNCC: 5 | RNVC: 2
0715 31 27: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-363-4320
Inserted Hammer Face Holder

143634320
NO PRIMARY REF14-363-4320: RNCC: 3 | RNVC: 2
208-50: RNCC: 5 | RNVC: 2
91300142: RNCC: 5 | RNVC: 2

9 May 1980

5120-14-349-8669
Spanner Wrench

143498669
0427-02013: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-427-6438
Torque Wrench Adapter

144276438
11.13: RNCC: 3 | RNVC: 2
11-13: RNCC: 5 | RNVC: 2
3148510926803: RNCC: 5 | RNVC: 2
0239227X00: RNCC: 5 | RNVC: 2
0092680: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-514-3758
Jeweler's Poising Tool

145143758
177E701-00: RNCC: 3 | RNVC: 2
177E701-00: RNCC: 5 | RNVC: 9

19 May 1999

5120-14-338-6460
Hand Blind Riveter

143386460
NO PRIMARY REF14-338-6460: RNCC: 3 | RNVC: 2
7800215: RNCC: 5 | RNVC: 9
TT17: RNCC: 5 | RNVC: 9

17 Dec 1976

5120-14-319-4545
Mechanical Puller Attachment

143194545
3130S98-04-001: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-568-6135
Flat Tip Screwdriver

145686135
AN5,5X300: RNCC: 3 | RNVC: 2
0775412: RNCC: 5 | RNVC: 2
3148517754126: RNCC: 5 | RNVC: 2

22 Jun 2011

5120-14-423-7057
Clef De Serrage

144237057
128198: RNCC: 3 | RNVC: 9

28 Apr 1988

5120-14-285-6411

5120-14-285-6300

5120-14-366-1992

5120-14-443-8036
Socle Dextraction

144438036
E3558: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-370-8539
Outil Passe-Fil

143708539
1897569516: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-253-9047

5120-14-404-0806
Bobines Fourchette

144040806
853-201-558-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-229-2671
Tire Palier

142292671
VTR250-1020: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-367-8188
Equ Broche Poussoir

143678188
MGC231-24-05: RNCC: 3 | RNVC: 2
MGC231-24-05: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-410-0630
Torque Wrench Adapter

144100630
853-100-208-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-470-5853
Screw Push-Pull Jack

144705853
10147-0-07: RNCC: 3 | RNVC: 2
RAB3331: RNCC: 5 | RNVC: 2

27 Jun 1994

5120-14-211-3668
Open End Wrench

142113668
D2604-2-131: RNCC: 3 | RNVC: 2
D2604-2/131: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-491-4147
Cle

144914147
NO PRIMARY REF14-491-4147: RNCC: 3 | RNVC: 2
74747N01: RNCC: 5 | RNVC: 9
F300 0T 002 7797: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-321-8070
Rotating Members Aligning Tool

143218070
3160S93-11-623: RNCC: 3 | RNVC: 2
85-686-7508: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-204-3028
Cle Speciale

142043028
M3-039: RNCC: 3 | RNVC: 2
M3-039: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-441-2346
Bearing And Bushing Inserter And Remover

144412346
6812V32-2666-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-301-9101
Pliers

143019101
280: RNCC: 3 | RNVC: 2
7318: RNCC: 5 | RNVC: 2
85-679-5620: RNCC: 6 | RNVC: 9

1 Jan 1973

5120-14-448-5020
Terminal Crimping Tool Contact Positioner

144485020
01-906: RNCC: 3 | RNVC: 2
91513604: RNCC: 5 | RNVC: 9
85-694-1367: RNCC: 6 | RNVC: 9

26 Jun 1991

5120-14-514-0132
Open End Wrench

145140132
ENFD29159-21X22: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-471-8873
Preformed Packing Inserter And Remover

144718873
332A93-3680-00: RNCC: 3 | RNVC: 2

21 Sep 1994

5120-14-441-2250
Bearing And Bushing Inserter And Remover

144412250
6802M10-0015-21: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-349-5440
Outil Surmoulage

143495440
413-65073-000: RNCC: 3 | RNVC: 2
04-413-0133-000: RNCC: 5 | RNVC: 2
85-800-5530: RNCC: 6 | RNVC: 9

22 May 1978

5120-14-530-2021
Socket Wrench Socket

145302021
S.3/4LA: RNCC: 3 | RNVC: 2
00.49.24.74: RNCC: 5 | RNVC: 2
3148510557458: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-273-7715
Flat Tip Screwdriver

142737715
FR31: RNCC: 3 | RNVC: 2
246-6: RNCC: 3 | RNVC: 2
3272670228603: RNCC: 5 | RNVC: 2
2695 111 31: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-490-6969
Punch

144906969
241 P 03755 000: RNCC: 3 | RNVC: 2
F300 0T 000 1121: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8756
Cle A C

144908756
4065 030 001 308: RNCC: 3 | RNVC: 2
F300 0T 000 5014: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-523-5436
Hand Hose Fitting Swaging Tool Kit

145235436
DLTFRPSKT3006: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-235-3911
Socket Wrench Crowfoot Attachment

142353911
25A1-2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-317-0693
Mechanical Puller Attachment

143170693
583315: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-405-5035
Terminal Crimping Tool Contact Positioner

144055035
809862: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-217-9962
Socket Wrench Ratchet Attachment

142179962
TC-2-1/2: RNCC: 3 | RNVC: 2
TC2 1-2: RNCC: 3 | RNVC: 2
3272670236585: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-234-4268

5120-14-416-7540
Support Socle

144167540
537359: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-416-7505
Rondelle Dappui

144167505
537268: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-348-7963

5120-14-241-6026

5120-14-534-0856
Detent Handling Tool

145340856
132300: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-574-9638
Detent Release Tool

145749638
MW1387F00: RNCC: 3 | RNVC: 2

5 Mar 2013

5120-14-353-2452

5120-14-371-1779

5120-14-444-9165
Socket Head Screw Key

144449165
88.2,5: RNCC: 3 | RNVC: 2
O613 250 025: RNCC: 5 | RNVC: 2
88-2-5: RNCC: 5 | RNVC: 2
3148511265406: RNCC: 5 | RNVC: 2
0225012S00: RNCC: 5 | RNVC: 2
91719011: RNCC: 5 | RNVC: 2
0126540: RNCC: 5 | RNVC: 9

28 Jan 1991

5120-14-348-9555
Electrical Card Extractor

143489555
OEC1230: RNCC: 3 | RNVC: 2
1230: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-14-340-3047
Filtre Extracteur

143403047
20738J: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-578-3377
Cross Tip Screwdriver

145783377
5010544014: RNCC: 3 | RNVC: 2

21 Nov 2013

5120-14-217-3638

5120-14-288-1834
Open End Wrench

142881834
CS01-622: RNCC: 3 | RNVC: 2
CS01622: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-441-1533
Screw Thread Insert Inserter

144411533
NO PRIMARY REF14-441-1533: RNCC: 3 | RNVC: 2
BR.6: RNCC: 5 | RNVC: 9

29 Oct 1997

5120-14-442-8287
Cross Tip Screwdriver

144428287
GS205-0: RNCC: 3 | RNVC: 2
1.70.3300: RNCC: 5 | RNVC: 2

6 Nov 1990

5120-14-423-2353
Poussoir

144232353
SP2086D-4: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-457-9944
Brad Awl

144579944
548026: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-503-4677
Electronic Component Inserter And Remover

145034677
39039190: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-373-6756
Spanner Wrench

143736756
199402: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-526-1073
Open End Wrench

145261073
20 242 031 1260: RNCC: 3 | RNVC: 2

4 Jul 2001

5120-14-546-9267
Socket Wrench Socket

145469267
NS.27LA: RNCC: 3 | RNVC: 2
3148516555502: RNCC: 5 | RNVC: 9

8 Sep 2005

5120-14-288-9936
Cross Tip Screwdriver

142889936
230P1: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-531-1207
Screwdriver Bit

145311207
EP.602T: RNCC: 3 | RNVC: 2
1112174M00: RNCC: 5 | RNVC: 2

24 Jul 2002

5120-14-221-8833

5120-14-429-0228
Ecrou Freinoir

144290228
8810007041: RNCC: 3 | RNVC: 2

4 Jan 1989

5120-14-280-9685

5120-14-343-6369

5120-14-408-1383

5120-14-401-5657
Tas De Montage

144015657
350A93-3713-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-280-2165
Open End Wrench

142802165
PA467-15A2P27: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-304-4384
Socket Wrench Socket

143044384
8810829035: RNCC: 3 | RNVC: 2
85-686-9836: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-463-5412
Spanner Wrench

144635412
M0FA010620: RNCC: 3 | RNVC: 2

17 Jun 1993

5120-14-376-2293
Mechanical Puller Attachment

143762293
0U133380: RNCC: 3 | RNVC: 2
0U133380: RNCC: 5 | RNVC: 2
0U133380: RNCC: 5 | RNVC: 2
0U133380: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-375-3668
Electrical Card Extractor

143753668
1806: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-425-7112
Cross Tip Screwdriver

144257112
995 062 095 000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-576-6557
Mechanical Puller S

145766557
8812034201: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-14-571-4986
Hand Bellows

145714986
215214-0: RNCC: 3 | RNVC: 2

29 Mar 2012

5120-14-249-0651
Cle Vis A Tete Creu

142490651
10855: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-558-0393
Flat Tip Screwdriver

145580393
AN5,5X35: RNCC: 3 | RNVC: 2
91883636: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-244-4135
Socket Wrench Socket

142444135
J12: RNCC: 3 | RNVC: 2
3272670220850: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-312-5313
Gabarit De Montage

143125313
9970-111-126: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-441-0432
Socket Wrench Ratchet Attachment

144410432
NO PRIMARY REF14-441-0432: RNCC: 3 | RNVC: 2
TC2 3-4: RNCC: 5 | RNVC: 9

16 Aug 1990

5120-14-556-8042
Electrical Connector Inserter

145568042
OCE93-144M: RNCC: 3 | RNVC: 2

11 Apr 2008

5120-14-323-4473
Dem Regul Supp Mont

143234473
0S20088: RNCC: 3 | RNVC: 2
0MDS20088: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-232-8842
Chasse Axe Special

142328842
594095: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-284-1957
Decolleur

142841957
U53: RNCC: 3 | RNVC: 2
U53P: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-245-1804

5120-14-395-5981
Wrench Kit

143955981
5-1881B43152-1352: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-226-3136
Support Generateur

142263136
60290-010M2: RNCC: 3 | RNVC: 2
60290-01-0M2: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-395-0277
Equipe Tirant

143950277
853-200-485-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-292-0798
Appareil Reperage P

142920798
NO PRIMARY REF14-292-0798: RNCC: 3 | RNVC: 2
AC27: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-384-9218
Defreinoir Droit

143849218
9970-126-139: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-572-7701
Socket Wrench Set

145727701
R.431ADP: RNCC: 3 | RNVC: 2
3148516928795: RNCC: 5 | RNVC: 2
692879: RNCC: 5 | RNVC: 2

31 Jul 2012

5120-14-343-1829
Pose Filet R Broche

143431829
01500612020: RNCC: 3 | RNVC: 2
01556120010: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-459-3426
Spring Inserter And Remover

144593426
T.100: RNCC: 3 | RNVC: 2
3148510611204: RNCC: 5 | RNVC: 2
0061120: RNCC: 5 | RNVC: 9

26 Nov 1992

5120-14-539-2720
Socket Wrench Socket

145392720
R.7/32LA: RNCC: 3 | RNVC: 2
3148510515250: RNCC: 5 | RNVC: 2

17 Dec 2003

5120-14-533-0216
Pliers

145330216
899213: RNCC: 3 | RNVC: 2

17 Jan 2003

5120-14-507-6128
Socket Head Screw Key

145076128
84TC.3: RNCC: 3 | RNVC: 2
3148511255803: RNCC: 5 | RNVC: 2
84TC3: RNCC: 5 | RNVC: 2
8038949P00: RNCC: 5 | RNVC: 2
84TC.3: RNCC: 5 | RNVC: 2
FZ84TC3: RNCC: 5 | RNVC: 9
0125580: RNCC: 5 | RNVC: 9
F300 0T 023 1809: RNCC: 6 | RNVC: 9

29 Jul 1998

5120-14-519-9125
Spanner Wrench

145199125
LYN600598000120: RNCC: 3 | RNVC: 2

19 Apr 2000

5120-14-349-6040
Montage Pour Reglag

143496040
214988: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-315-5988
Screwdriver Bit

143155988
ES13: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-325-0264
Open End Wrench

143250264
0S20735: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-352-2750

5120-14-252-5508

5120-14-362-7692

5120-14-457-5494
Corps

144575494
13120: RNCC: 3 | RNVC: 2

10 Sep 1992

5120-14-290-7515

5120-14-239-6373

5120-14-232-7892
Pliers

142327892
E73-140-160IS0LEE: RNCC: 2 | RNVC: 2
1261-16B0: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-325-4828
Mise En Forme Bague

143254828
S16-0606-0961: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-201-9578
Open End Wrench

142019578
44-25X27EC: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-421-2765
Piston Ring Expander

144212765
301A99298-02: RNCC: 3 | RNVC: 2
301A99298-02: RNCC: 5 | RNVC: 2
301A99298-02: RNCC: 5 | RNVC: 9
301A99298-02: RNCC: 5 | RNVC: 9

14 Jan 1988

5120-14-252-6662
Open End Wrench

142526662
44-14X15CP: RNCC: 3 | RNVC: 2
5050: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-338-4674
Extracteur Support

143384674
PR1-47259: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-452-3231
Preformed Packing Inserter And Remover

144523231
T20-13G5-2A1: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-576-1178
Ratchet Wrench

145761178
467S.12: RNCC: 3 | RNVC: 2
3148518196062: RNCC: 5 | RNVC: 2
819606: RNCC: 5 | RNVC: 2

30 May 2013

5120-14-376-2332

5120-14-490-8967
Tourne A G

144908967
4067 780 000 606: RNCC: 3 | RNVC: 2
F300 0T 000 5255: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-396-6498
De Montage Cone

143966498
D46810: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-214-8314

5120-14-283-2506

5120-14-573-3649
Hand Hammer

145733649
NO PRIMARY REF 14-573-3649: RNCC: 3 | RNVC: 2
002048: RNCC: 5 | RNVC: 2
002048: RNCC: 5 | RNVC: 2

8 Oct 2012

5120-14-440-5316
Maintien Outillage

144405316
0S22954: RNCC: 3 | RNVC: 2
85-694-0734: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-574-5788
Screwdriver Bit Holder

145745788
E-112-J10: RNCC: 3 | RNVC: 2

1 Feb 2013

5120-14-565-2809
Pliers

145652809
193.16AVSE: RNCC: 3 | RNVC: 2
AA029080: RNCC: 6 | RNVC: 9

4 Aug 2010

5120-14-516-5307
Open End Wrench

145165307
20.1 1/4: RNCC: 3 | RNVC: 2

29 Sep 1999

5120-14-397-6327
Cle A Douil Douille

5120-14-395-9077
Mandrin Mis Place J

143959077
4-21578: RNCC: 3 | RNVC: 2

21 Nov 1984

5120-14-488-4866
Retaining Ring Pliers

144884866
438.1: RNCC: 3 | RNVC: 2
3148511762622: RNCC: 5 | RNVC: 2
438-1: RNCC: 5 | RNVC: 2
0176262: RNCC: 5 | RNVC: 9

14 May 1997

5120-14-380-8368
Extracteur

143808368
C46146: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-569-3072
Mechanical Puller

145693072
F27588000: RNCC: 3 | RNVC: 2
F27588000: RNCC: 5 | RNVC: 2

1 Sep 2011

5120-14-289-8524
Support De Serrage

142898524
F0M2007: RNCC: 3 | RNVC: 2
F0M2007: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-319-7490
Collier Montage Acc

143197490
331252ET313203: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-493-1822
Cle

144931822
229537W: RNCC: 3 | RNVC: 2
F300 0T 011 0141: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-317-0321

5120-14-280-1438

5120-14-428-5540
Support Plaque

144285540
MKG4592101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-351-8218
Socket Wrench Socket

143518218
BS27MM: RNCC: 3 | RNVC: 9

16 Oct 1978

5120-14-488-2242
Retaining Ring Pliers

144882242
167G.13: RNCC: 3 | RNVC: 2
3148511394519: RNCC: 5 | RNVC: 2
FACOM 167G13: RNCC: 5 | RNVC: 2
167G13: RNCC: 5 | RNVC: 2
167G-13: RNCC: 5 | RNVC: 2
0139451: RNCC: 5 | RNVC: 9
958 220 001 001: RNCC: 6 | RNVC: 9

23 Apr 1997

5120-14-413-1100
Hand Blind Riveter

144131100
9553-100-110: RNCC: 3 | RNVC: 2
9553100110: RNCC: 5 | RNVC: 2

26 Nov 1986

5120-14-421-4459
Flat Tip Screwdriver

144214459
NO PRIMARY REF14-421-4459: RNCC: 3 | RNVC: 2
2611 135 11601: RNCC: 5 | RNVC: 2
2611-135-11601: RNCC: 5 | RNVC: 2
R221-697: RNCC: 5 | RNVC: 9
1190-8-40: RNCC: 5 | RNVC: 9

14 Jan 1988

5120-14-454-8841
Pre-Sertissage Bloc

144548841
RPS 6F20 1-5K: RNCC: 3 | RNVC: 2
RPS6F20X1-5K: RNCC: 5 | RNVC: 2

24 Apr 1992

5120-14-252-2946
Spanner Wrench

142522946
NO PRIMARY REF14-252-2946: RNCC: 3 | RNVC: 2
341064: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-309-7469
Extracteur Element

143097469
341A98-2038-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-203-6018
Piston Ring Compressor

142036018
582BIST55-110-60: RNCC: 3 | RNVC: 9
MUL582BIST55-110-60: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-463-9783
Extraction Poignee

144639783
854-500-335-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-220-5156
Obus Demmanchement

142205156
3160-95-33-030-1: RNCC: 3 | RNVC: 2
3160S95-33-030-1: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-466-7454
Socket Wrench Extension

144667454
3511 193 12041: RNCC: 3 | RNVC: 2
3511-193-12041: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-410-0622
Socket Wrench Crowfoot Attachment

144100622
853-100-212-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-241-1480
Cle A Ergots Specia

142411480
0676-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-283-8560
Rondelle De Centrag

142838560
65MA404521: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-510-0490
Pliers

145100490
NO PRIMARY REF14-510-0490: RNCC: 3 | RNVC: 2
85555: RNCC: 5 | RNVC: 9
5120AA2059426: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-287-5296

5120-14-471-1182
Bearing And Bushing Remover

144711182
2002002410: RNCC: 3 | RNVC: 2
39959495: RNCC: 5 | RNVC: 2
2002002410: RNCC: 5 | RNVC: 2

27 Jul 1994

5120-14-321-9948
Combination Box And Open End Wrench

143219948
02240084500: RNCC: 3 | RNVC: 2
022400845: RNCC: 5 | RNVC: 2
026400745: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-444-7631
Face Spanner Wrench Socket

144447631
0478-200015: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-372-6388
Spanner Wrench

143726388
523284: RNCC: 3 | RNVC: 2
23481: RNCC: 5 | RNVC: 2
BFC23481: RNCC: 5 | RNVC: 2

21 Sep 1981

5120-14-316-1629
Mandr Emmanch Bouch

143161629
A121879: RNCC: 3 | RNVC: 2
100061: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-423-2340
Basculeur Cle Dyn

144232340
SP2086D-3-500: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-399-3367
De Serrage Outil

143993367
MHP374-42: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-338-4687
Extracteur Poussoir

143384687
GA46224: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-253-2047

5120-14-217-9957
Rallonge Speciale P

142179957
RDG0: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-451-8139
Spanner Wrench

144518139
9.573.0044: RNCC: 3 | RNVC: 2
95730044: RNCC: 3 | RNVC: 2
91631177: RNCC: 5 | RNVC: 2
5000816534: RNCC: 5 | RNVC: 2

4 Dec 1991

5120-14-289-1435
Open End Wrench

142891435
1-616: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-420-9191
Manutention Bras

5120-14-300-0469

5120-14-567-1984
Slip Joint Pliers

145671984
181.30G: RNCC: 3 | RNVC: 2
777848: RNCC: 5 | RNVC: 2
3148517778481: RNCC: 5 | RNVC: 2

21 Feb 2011

5120-14-347-0814

5120-14-248-3536

5120-14-317-2258

5120-14-573-3998
Piston Inserter

145733998
9622DT168: RNCC: 3 | RNVC: 2

10 Oct 2012

5120-14-204-3015
Cle Speciale

142043015
M4-043: RNCC: 3 | RNVC: 2
M4-043: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-237-4426
Cle Speciale

142374426
M3-065: RNCC: 3 | RNVC: 2
M3-065: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-383-6534
Spanner Wrench

143836534
S16-0656-0340: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-469-8605
Socket Head Screw Key

144698605
83-S2: RNCC: 3 | RNVC: 2
0123804: RNCC: 3 | RNVC: 2
83.S2: RNCC: 5 | RNVC: 2
83S2: RNCC: 5 | RNVC: 2

16 May 1994

5120-14-556-5822
Torque Wrench

145565822
DYQ-50-1: RNCC: 3 | RNVC: 2

26 Mar 2008

5120-14-424-8810
Bearing And Bushing Inserter And Remover

144248810
851-500-565-0: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-406-5626
Guidage Broche

144065626
853-200-501-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-368-4122
Spanner Wrench

143684122
Z0103-913: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-387-5469
Socket Wrench Spanner Attachment

143875469
N410-381: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-473-3129
Screwdriver Bit

144733129
ES.605,5: RNCC: 3 | RNVC: 2
ES.605,5: RNCC: 5 | RNVC: 2
163-0179: RNCC: 5 | RNVC: 2
0614 177 970: RNCC: 5 | RNVC: 2
3148510248325: RNCC: 5 | RNVC: 2
ES605-5: RNCC: 5 | RNVC: 2
1114524D00: RNCC: 5 | RNVC: 2
91729456: RNCC: 5 | RNVC: 2
FACOMES.605,5: RNCC: 5 | RNVC: 9
0024832: RNCC: 5 | RNVC: 9

13 Dec 1994

5120-14-222-7397
Open End Wrench

142227397
34 9-32: RNCC: 3 | RNVC: 2
35 9-32X9-32: RNCC: 3 | RNVC: 2
34.9/32: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-424-5677
Socket Wrench Socket

144245677
0028440: RNCC: 3 | RNVC: 2
J-1"L: RNCC: 3 | RNVC: 2
J.1"L: RNCC: 5 | RNVC: 2

31 May 1988

5120-14-442-5711
Open End Wrench

144425711
GS120-12X13: RNCC: 3 | RNVC: 2
1.70.1006: RNCC: 5 | RNVC: 2

22 Oct 1990

5120-14-392-0853
Torque Wrench Adapter

143920853
853-100-110-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-367-2437
Outil Regl Commutat

143672437
C47822: RNCC: 3 | RNVC: 2
85-691-3214: RNCC: 6 | RNVC: 9

11 Dec 1980

5120-14-393-8801
Monte-Joint Outil

143938801
NO PRIMARY REF14-393-8801: RNCC: 3 | RNVC: 2
OU138267: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-334-8416

5120-14-359-6701
Clap Montage Embout

143596701
BE011953: RNCC: 3 | RNVC: 2
BE011953: RNCC: 5 | RNVC: 9

15 Oct 1979

5120-14-325-0294
Regulateur Guide

143250294
0S20803: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-395-2079

5120-14-573-5936
Crimping Tool Die

145735936
FTM45: RNCC: 3 | RNVC: 2

24 Oct 2012

5120-14-272-3661
Open End Wrench

142723661
E74302C28-29WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-276-3247
Screwdriver Bit

142763247
NO PRIMARY REF14-276-3247: RNCC: 3 | RNVC: 2
C0PSAT1875L20: RNCC: 5 | RNVC: 9
065 120 000 590: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-427-1442
Spanner Wrench

144271442
0372-42-10070: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-212-9118
Etrier Obturateur F

142129118
9970-111-001: RNCC: 3 | RNVC: 2
190-345: RNCC: 5 | RNVC: 2
9970-111-001-01: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-399-1597
Retaining Ring Pliers

143991597
190-17: RNCC: 3 | RNVC: 2
3272670266551: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-374-8335
Hand Terminal Crimping Tool

143748335
577454006: RNCC: 3 | RNVC: 2
CAE01633: RNCC: 5 | RNVC: 2
285-5161: RNCC: 5 | RNVC: 2
577454: RNCC: 5 | RNVC: 9
5774-540-06: RNCC: 5 | RNVC: 9

30 Jan 1982

5120-14-262-5491
Pousse Roulement

142625491
0-50840: RNCC: 3 | RNVC: 2
050-840: RNCC: 5 | RNVC: 2
050840: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-224-9900
Open End Wrench

142249900
10A32: RNCC: 3 | RNVC: 9
10A32: RNCC: 5 | RNVC: 2
CS01-619: RNCC: 5 | RNVC: 2
CS01619: RNCC: 5 | RNVC: 2
10A32: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-228-7214
Open End Wrench

142287214
11EC01-2X9-16: RNCC: 3 | RNVC: 2
44EC1-2X9-16: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-200-0909
Spanner Wrench

142000909
1977: RNCC: 3 | RNVC: 2
29-207-82: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-301-0983
Bearing Staking Installation Tool

143010983
330A98-3440-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-444-3176
Combination Box And Open End Wrench

144443176
GS130-19: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-263-8187

5120-14-476-3291
Socket Wrench Screwdriver Attachment

144763291
NSH.5: RNCC: 3 | RNVC: 2
NF E74-362: RNCC: 4 | RNVC: 1
3148515105777: RNCC: 5 | RNVC: 2
NST.5: RNCC: 5 | RNVC: 2
0510577: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-501-4164
Flat Tip Screwdriver

145014164
NO PRIMARY REF14-501-4164: RNCC: 3 | RNVC: 2
AH12X200: RNCC: 5 | RNVC: 2
0005932: RNCC: 5 | RNVC: 2
3148510059327: RNCC: 5 | RNVC: 2
AH.12X200: RNCC: 5 | RNVC: 2

29 Oct 1997

5120-14-422-9321
Etancheit Outillage

144229321
0373-OU-30801: RNCC: 3 | RNVC: 2
0373-OU30801: RNCC: 5 | RNVC: 2

24 Mar 1988

5120-14-557-9265
Hydraulic Jack Handle

145579265
754-150-16: RNCC: 3 | RNVC: 2

31 Jul 2008

5120-14-570-6981
Socket Wrench

145706981
M65725616A: RNCC: 3 | RNVC: 2

18 Jan 2012

5120-14-416-7495
Plaque D'appui

144167495
537254: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-424-5620
Socket Wrench Adapter

144245620
0980159: RNCC: 3 | RNVC: 2
SP.1739: RNCC: 5 | RNVC: 2
SP1739: RNCC: 5 | RNVC: 2

28 May 1988

5120-14-242-9097

5120-14-263-2896
Cle Dapproche Equip

142632896
T34BBM7BREP8A11: RNCC: 3 | RNVC: 2
T0553BBM7AREP8A11ET13: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-231-8222

5120-14-436-0195
Support Emmanchmt

144360195
RT30572: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-319-9783

5120-14-570-2062
Bearing And Bushing Inserter

145702062
UFA31549: RNCC: 3 | RNVC: 2

28 Nov 2011

5120-14-201-2189

5120-14-342-5322

5120-14-362-5055
Support De Cric

143625055
003005035M: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-295-6452
Cle Speciale Reacte

142956452
9970-115-426: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-320-4327
Socket Head Screw Key

143204327
3511-180-23111: RNCC: 3 | RNVC: 2
3511 180 23111: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-509-9561
Spanner Wrench

145099561
91352: RNCC: 3 | RNVC: 2
055W02-544717G: RNCC: 3 | RNVC: 2
7M147Q: RNCC: 3 | RNVC: 2
91352: RNCC: 5 | RNVC: 9
5120AA1119968: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-385-9818
Spanner Wrench

143859818
0.411/60117: RNCC: 3 | RNVC: 2
0411-60117: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-498-9743
Cle

144989743
A-JB0326: RNCC: 3 | RNVC: 9
AJB0326: RNCC: 5 | RNVC: 2
F300 0T 014 4818: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-429-4900
Spanner Wrench

144294900
Y075-065-000A: RNCC: 3 | RNVC: 2

25 Jan 1989

5120-14-253-9394
Extracteur Pour Bil

142539394
NO PRIMARY REF14-253-9394: RNCC: 3 | RNVC: 2
23959: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-232-9184
Outil Pour Emmanche

142329184
51685: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-241-6080

5120-14-333-3842

5120-14-204-2988

5120-14-451-2675
Sertissag Outillage

144512675
MMG047-04: RNCC: 3 | RNVC: 2
MMG047-04: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-396-4130
Ob Etancheite Outil

143964130
6274-51021: RNCC: 3 | RNVC: 2
6274-2700020: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-491-0138
Cle

144910138
4602 007 200 071: RNCC: 3 | RNVC: 2
F300 0T 001 0924: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-283-2508

5120-14-554-8396
Screwdriver Bit

145548396
EH.207L: RNCC: 3 | RNVC: 2

30 Aug 2007

5120-14-285-4578
Spanner Wrench

142854578
E68A: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-441-2002
Female Electrical Contact Resizing Tool

144412002
R073030003: RNCC: 3 | RNVC: 2
91711061: RNCC: 5 | RNVC: 2
73030003: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-224-8031
Open End Wrench

142248031
39CP1 1-8X1 5-16: RNCC: 3 | RNVC: 2
13L1 1-8X1 5-16: RNCC: 3 | RNVC: 2
VIR39CP1 1-8X1 5-16: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-297-3191

5120-14-574-5725
Pliers

145745725
188.16AVSE: RNCC: 3 | RNVC: 2

31 Jan 2013

5120-14-427-0933
Formage Tas

144270933
540325: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-573-5897
Mechanical Puller Body

145735897
T623G3006124: RNCC: 3 | RNVC: 2

23 Oct 2012

5120-14-458-8846
Tronconique Manchon

144588846
M34372-16: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-416-5127
Spanner Wrench

144165127
7527-22100: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-522-9822
Blacksmith's Swage Block

145229822
3130S95-66-125: RNCC: 3 | RNVC: 2
3130-95-66-125: RNCC: 5 | RNVC: 2

13 Dec 2000

5120-14-391-8631
Torque Wrench Adapter

143918631
MHD159-22: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-429-4898
Spanner Wrench

144294898
Y075-039-000B: RNCC: 3 | RNVC: 2

25 Jan 1989

5120-14-355-3464
Spanner Wrench

143553464
330A98-2164-00: RNCC: 3 | RNVC: 2
330A98-2164-20: RNCC: 5 | RNVC: 2

19 Mar 1979

5120-14-411-2088
Spanner Wrench

144112088
121-411-04W26H: RNCC: 3 | RNVC: 2
121-411-04-W26H: RNCC: 5 | RNVC: 2
85-692-5700: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-262-8137
Pied-De-Biche Ferbl

142628137
13-21: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-575-2680
Torque Wrench Adapter

145752680
82493085000: RNCC: 3 | RNVC: 1

25 Mar 2013

5120-14-435-5968
Outil De Levage

144355968
8813913000: RNCC: 3 | RNVC: 2

8 Nov 1989

144908761
4065 030 001 337: RNCC: 3 | RNVC: 2
F300 0T 000 5019: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-486-5676
Montage

144865676
RT21777: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-438-7104
Lot D'accompagnemen

144387104
20130185: RNCC: 3 | RNVC: 2
20130185: RNCC: 3 | RNVC: 9

30 Mar 1990

5120-14-493-7683
Cle

144937683
BLC23189: RNCC: 3 | RNVC: 2
F300 0T 013 9721: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-376-2294

5120-14-574-1479
Socket Head Screw Key

145741479
67-4A: RNCC: 3 | RNVC: 2

11 Dec 2012

5120-14-343-1859
Bague Verrou

143431859
199805: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-495-7500
Cle De 3

144957500
10253237: RNCC: 3 | RNVC: 2
F300 0T 019 9428: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-255-9992
Cle Pour Ecrou De B

142559992
24145002700: RNCC: 3 | RNVC: 2
145J27: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-401-5724
Montage Cimblot

144015724
854-200-018-0: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-495-0988
Cle De Serra

144950988
859624: RNCC: 3 | RNVC: 2
F300 0T 018 3552: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-281-2907

5120-14-575-1739
Spanner Wrench

145751739
10678908000: RNCC: 3 | RNVC: 1

18 Mar 2013

5120-14-228-5985

5120-14-234-4270
Couronne De Serrage

142344270
17895T1REP13: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-260-1740

5120-14-365-1010

5120-14-380-4710
Gabarit Amovible

143804710
535081: RNCC: 3 | RNVC: 2
00535081: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-233-6929

5120-14-556-1661
Hand Blind Riveter

145561661
3591271: RNCC: 3 | RNVC: 2

7 Feb 2008

5120-14-237-7108
Cle Demontage Therm

142377108
205368: RNCC: 3 | RNVC: 2
205368: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-216-4728

5120-14-271-6114

5120-14-393-8818
Bague De Retrait

143938818
NO PRIMARY REF14-393-8818: RNCC: 3 | RNVC: 2
OU138269: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-378-5559
Btp Socle

143785559
6809J32-1671-00: RNCC: 3 | RNVC: 2
6809360A32-1671-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-336-0376
Rallonge De Cle

143360376
FH86-905-01: RNCC: 3 | RNVC: 2
85-688-2628: RNCC: 6 | RNVC: 9

24 Jul 1976

5120-14-438-9590
Bearing And Bushing Inserter And Remover

144389590
330A98-2024-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-270-8383
Spanner Wrench

142708383
D1553-4809: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-419-6719
Plier Type Eyelet Punch

144196719
4: RNCC: 3 | RNVC: 2
4: RNCC: 5 | RNVC: 9
85-693-5280: RNCC: 6 | RNVC: 9

2 Nov 1987

5120-14-480-9005
Combination Box And Open End Wrench

144809005
GS130-25: RNCC: 3 | RNVC: 2

11 Apr 1996

5120-14-329-8848
Socket Head Screw Key

143298848
3511 130 89741: RNCC: 3 | RNVC: 2
3511-130-89741: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-342-8781
Quick Adjusting Screw Clamp

143428781
20-160: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-385-3156
Mechanical Puller Attachment

143853156
360A93-3401-22: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-273-6804
Wrench Kit

142736804
8810400000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-535-2293
Hand Material Handling Hook

145352293
1751M6: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-426-8297
Socket Head Screw Key

144268297
0419-40050: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-329-8285
Spanner Wrench

143298285
8811137000: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-524-7086
Socket Wrench Socket

145247086
R43-T2: RNCC: 3 | RNVC: 2

5 Apr 2001

5120-14-341-5348
Socket Head Screw Key

143415348
95A10117: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-222-7178
Open End Wrench

142227178
BB90: RNCC: 3 | RNVC: 9
1144-26X29: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-316-1624
Spanner Wrench

143161624
A125889: RNCC: 3 | RNVC: 2
100169: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-550-6484
Pliers

145506484
187.20G: RNCC: 3 | RNVC: 2

5 Jul 2006

5120-14-529-0509
Flat Tip Screwdriver

145290509
ACZ.5,5X150: RNCC: 3 | RNVC: 2
8033541Y00: RNCC: 5 | RNVC: 2
3148516256256: RNCC: 5 | RNVC: 2

6 Mar 2002

5120-14-237-3723
Spanner Wrench

142373723
H90R1001A: RNCC: 3 | RNVC: 2
H90R1001A: RNCC: 5 | RNVC: 2
530513: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-241-0268
Cle Speciale

142410268
202450: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-242-9487
Open End Wrench

142429487
411950: RNCC: 3 | RNVC: 9
SR118001: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-324-7079
Retaining Ring Pliers

143247079
0180600: RNCC: 3 | RNVC: 2
499: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-333-3893

5120-14-214-2913
Cle A Rotule Specia

142142913
8583: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-325-0297
Robinet Bague Guide

143250297
0S21336: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-292-6749

5120-14-342-7039

5120-14-449-6835
Positionneur Contac

144496835
M22520MS: RNCC: 3 | RNVC: 2

2 Sep 1991

5120-14-220-8036

5120-14-452-6575
Adaptateur

144526575
F46954: RNCC: 3 | RNVC: 2
85-694-5259: RNCC: 6 | RNVC: 9

15 Jan 1992

5120-14-393-0289
Combination Box And Open End Wrench

143930289
41.30: RNCC: 3 | RNVC: 2
91564533: RNCC: 5 | RNVC: 2
3148511013779: RNCC: 5 | RNVC: 2
41-30: RNCC: 5 | RNVC: 2
1060242E00: RNCC: 5 | RNVC: 2
0101377: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-518-0282
Six Point Tip Screwdriver

145180282
ENFD6576-40X140-6PANS: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-423-7245
Bearing And Bushing Inserter And Remover

144237245
3160-95-63-110: RNCC: 3 | RNVC: 2

28 Apr 1988

5120-14-384-7362
Electrical Card Extractor

143847362
NO PRIMARY REF14-384-7362: RNCC: 3 | RNVC: 2
16931895: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-334-7140
Electronic Crystal Unit Extractor

143347140
NO PRIMARY REF14-334-7140: RNCC: 3 | RNVC: 2
97199: RNCC: 5 | RNVC: 9

1 Jun 1976

5120-14-272-3712
Open End Wrench

142723712
E74302R12-13BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-223-2554
Spanner Wrench

142232554
D1054-5931: RNCC: 3 | RNVC: 2
D1054-5931: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-375-2868
Piston Arbre Extrac

143752868
73-115-018: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-393-8128
Flat Tip Screwdriver

143938128
AGN13X250: RNCC: 3 | RNVC: 2

23 Jun 1984

5120-14-405-6158
Bearing And Bushing Inserter

144056158
8814151000: RNCC: 3 | RNVC: 2

4 Dec 1985

5120-14-421-7307
Brad Awl

144217307
8814053005: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-418-6054
Pliers

144186054
7310: RNCC: 3 | RNVC: 2

2 Sep 1987

5120-14-483-0610
Spanner Wrench

144830610
10443608: RNCC: 3 | RNVC: 2

8 Aug 1996

5120-14-357-9980
Equipe Guignol

143579980
MKM0432400: RNCC: 3 | RNVC: 2
MKM0432400: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-246-9452

5120-14-229-7617
Bague Filetee

142297617
969268: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-445-9748
Cross Tip Screwdriver

144459748
TX208: RNCC: 3 | RNVC: 2
85-694-4816: RNCC: 6 | RNVC: 9

27 Feb 1991

5120-14-241-6311
Extracteur Axe Avan

142416311
1050-95-506-00: RNCC: 3 | RNVC: 2
95-506-00: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-438-4989
Torque Wrench Adapter

144384989
MHD535-22: RNCC: 3 | RNVC: 2
85-694-0425: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-499-7440
Open End Wrench

144997440
10-19X22CP: RNCC: 3 | RNVC: 2
F300 0T 023 7318: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-484-1179
Socket Head Screw Key

144841179
46021656: RNCC: 3 | RNVC: 2

24 Oct 1996

5120-14-536-5274
Socket Wrench Socket

145365274
SJ.235: RNCC: 3 | RNVC: 2
3148510591193: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-422-2407
Bearing And Bushing Inserter And Remover

144222407
0373-0U115053: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-214-4131

5120-14-415-9291
Socket Wrench Socket

144159291
853-100-241-0: RNCC: 3 | RNVC: 2

26 May 1987

5120-14-329-3589
Outillage Bloc Ecro

143293589
927-78: RNCC: 3 | RNVC: 9

2 Jul 1975

5120-14-245-3275
Pliers

142453275
UTICA529-10: RNCC: 3 | RNVC: 2
8498-01: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-280-4182
Spanner Wrench

142804182
A124538: RNCC: 3 | RNVC: 2
100116: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-334-6987
Electrical Card Extractor

143346987
26044766: RNCC: 3 | RNVC: 2
26044766: RNCC: 3 | RNVC: 9

1 Jun 1976

5120-14-527-9762
Open End Wrench

145279762
710761: RNCC: 1 | RNVC: 2
GAB68099: RNCC: 3 | RNVC: 2

5 Dec 2001

5120-14-277-3165
Flat Tip Screwdriver

142773165
D31: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-553-1524
Socket Wrench Socket Set

145531524
096513110: RNCC: 3 | RNVC: 2

7 Mar 2007

5120-14-340-6485
Combination Box And Open End Wrench

143406485
40.1'5/8L: RNCC: 3 | RNVC: 2
3148511012468: RNCC: 5 | RNVC: 2
40 1 5/8L: RNCC: 5 | RNVC: 2
0101246: RNCC: 5 | RNVC: 9
40-1 5-8: RNCC: 5 | RNVC: 9

14 Feb 1977

5120-14-528-7271
Socket Head Screw Key

145287271
815-1-99-129: RNCC: 3 | RNVC: 2

6 Feb 2002

5120-14-361-4391
Spanner Wrench

143614391
NO PRIMARY REF14-361-4391: RNCC: 3 | RNVC: 2
225243: RNCC: 5 | RNVC: 9

24 Jan 1980

5120-14-260-2307
Cle

142602307
M3-080: RNCC: 3 | RNVC: 2
M3-080: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-321-8535
Tendeur Alignement

143218535
6507596: RNCC: 3 | RNVC: 2
6507596: RNCC: 5 | RNVC: 1
85-626-7142: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-402-7942
Bearing And Bushing Inserter

144027942
3210-97-31-021: RNCC: 3 | RNVC: 2
85-692-9456: RNCC: 6 | RNVC: 9

19 Jul 1985

5120-14-370-8865
Bearing Staking Installation Tool

143708865
6801D24-0285-12: RNCC: 3 | RNVC: 2
6801321024-0285-12: RNCC: 5 | RNVC: 2

21 Feb 1996

5120-14-435-5963
Etrier Basculement

144355963
8812288000: RNCC: 3 | RNVC: 2

8 Nov 1989

5120-14-286-2397
Poincon Pour Pince

142862397
47322: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-436-0309
Capteur Cle Reglage

144360309
RT38751: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-264-5974

5120-14-278-3000
Cle Speciale

142783000
24545865700: RNCC: 3 | RNVC: 2
145J657: RNCC: 5 | RNVC: 9
245458657: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-344-9965

5120-14-478-5837
Montage Cone

144785837
100-531: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-374-6787

5120-14-516-8042
Poussoir

145168042
5001008694: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-362-1753
Faux Mors

143621753
C46469: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-386-1637
Mechanical Puller Attachment

143861637
6803J32-3036-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-462-9850
Cle A Creneaux

144629850
T700A3299000009: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-357-4322
Socket Wrench Adapter-Extension

143574322
7237RALL0NGE: RNCC: 3 | RNVC: 2
XCELITE99X5: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-423-2214
Tube Cle Dyn

144232214
0747118: RNCC: 3 | RNVC: 2
SP.1733 D-8: RNCC: 5 | RNVC: 2
SP1733D-8: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-206-1515
Cle Speciale

142061515
M3-084: RNCC: 3 | RNVC: 2
M3-084: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-514-0143
Open End Wrench

145140143
ENFD29159-24X26: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-393-4132
Socket Head Screw Key

143934132
85-111: RNCC: 3 | RNVC: 2
3148511258002: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-444-4576
Spanner Wrench

144444576
232484: RNCC: 3 | RNVC: 2
85-694-3568: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-488-9250
Spanner Wrench

144889250
4311MT002-010: RNCC: 3 | RNVC: 2

11 Jun 1997

5120-14-206-7997
Blacksmith's Punch

142067997
M0B12-10ECR0ND: RNCC: 3 | RNVC: 2
3833-10EMMANCHE: RNCC: 3 | RNVC: 9
15-10: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-373-0025
Electrical Card Extractor

143730025
21317428: RNCC: 3 | RNVC: 2
85-691-5633: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-509-9582
Open End Wrench

145099582
006-502-162: RNCC: 3 | RNVC: 2
5120AA1120812: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-317-7950
Pign Roul Outillage

143177950
NO PRIMARY REF14-317-7950: RNCC: 3 | RNVC: 2
800495-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-305-0876
Bearing Staking Installation Tool

143050876
341A98-2008-02: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-378-5526
Mechanical Puller Gear Adapter

143785526
6802J33-4002-00: RNCC: 3 | RNVC: 2
6802360A33-4002-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-270-1815
Open End Wrench

142701815
NO PRIMARY REF14-270-1815: RNCC: 3 | RNVC: 2
175171: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-390-9863
Lot Adaptation

143909863
MKT045-01: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-318-6231
Spanner Wrench

143186231
C46343: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-489-7904
Screwdriver Bit

144897904
ES.126,5T: RNCC: 3 | RNVC: 2
3148510249834: RNCC: 5 | RNVC: 2
0024983: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-539-7358
Electrical Contact Inserter And Remover

145397358
27329FA: RNCC: 3 | RNVC: 2

5 Feb 2004

5120-14-249-9496
Socket Wrench Socket

142499496
1127: RNCC: 3 | RNVC: 2
720717: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-410-3456
Bearing And Bushing Inserter And Remover

144103456
8813930000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-244-0381
Lasting Pincers

142440381
784: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-552-1985
Six Point Tip Screwdriver

145521985
ACZXR.20X100: RNCC: 3 | RNVC: 2
ACZXR.20X100: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-14-539-3917
Socket Head Screw Key

145393917
SP.15793: RNCC: 3 | RNVC: 2
47067687: RNCC: 5 | RNVC: 2

13 Jan 2004

5120-14-461-0141
Bearing And Bushing Remover

144610141
45057197: RNCC: 3 | RNVC: 2
45057197: RNCC: 5 | RNVC: 9

17 Feb 1993

5120-14-220-7901
Open End Wrench

142207901
RACD14: RNCC: 3 | RNVC: 2
RACD14: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-410-3509
Spanner Wrench

144103509
8812124000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-209-0865
Socket Head Screw Key

142090865
STC156967B: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-040-7666
Screwdriver Bit

140407666
1020-4B: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-550-6368
Six Point Tip Screwdriver

145506368
61395993AA: RNCC: 3 | RNVC: 2

4 Jul 2006

5120-14-537-4912
Open End Wrench

145374912
9401LOP120: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-261-0360
Spanner Wrench

142610360
0256-78: RNCC: 3 | RNVC: 2
RA256: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-417-1273
Tringle

144171273
547933: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-231-8828
Bague Speciale

142318828
PR47134: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-557-7430
Seal Inserter

145577430
S49075: RNCC: 3 | RNVC: 2

8 Jul 2008

5120-14-241-1495
Mandrin Maintien Ba

142411495
0711-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-385-7538
Adaptateur Tensionn

143857538
338816: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-227-8931
Open End Wrench

142278931
35-9: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-473-3116
Socket Wrench Adapter

144733116
M.230B: RNCC: 3 | RNVC: 2
3148510326665: RNCC: 5 | RNVC: 2
M230B: RNCC: 5 | RNVC: 2
M230.B: RNCC: 5 | RNVC: 2
0032666: RNCC: 5 | RNVC: 9

13 Dec 1994

5120-14-241-1513
Cle A Ergots Specia

142411513
0766-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-247-9648
Rallonge Cle A Doui

142479648
RT20648: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-285-0374

5120-14-390-3202
Cle Support Tension

143903202
01-90900-034: RNCC: 3 | RNVC: 2
01-90-900-034: RNCC: 5 | RNVC: 2
85-692-4860: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-369-3274
Cimblot Dextracteur

143693274
366A93-3101-22: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-519-4580
Outillage D'extract

145194580
147163220: RNCC: 3 | RNVC: 2

21 Mar 2000

5120-14-362-4012
Spanner Wrench

143624012
BAZ51360: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-457-4384
Bearing And Bushing Remover

144574384
45057171: RNCC: 3 | RNVC: 2
45057171: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-473-1817
Spanner Wrench

144731817
4902409: RNCC: 3 | RNVC: 2

7 Dec 1994

5120-14-444-3511

5120-14-444-3545

5120-14-416-7542
Mandrin Presse

144167542
537361: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-280-2192

5120-14-393-9403

5120-14-361-6774

5120-14-229-3336
Ecrou Extracteur

142293336
885H1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-574-4453
Mechanical Puller Attachment

145744453
8815851002: RNCC: 3 | RNVC: 2

21 Jan 2013

5120-14-207-5306

5120-14-404-2354
Montage Interbague

144042354
24545980000: RNCC: 3 | RNVC: 2
245459800: RNCC: 5 | RNVC: 9
43196057: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-040-7378
Roule-Goupille Jeu

140407378
000163003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-419-2639
Protege Axe Manchon

144192639
530770: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-310-7505

5120-14-576-6127
Inserter And Remove

145766127
8810546301: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-249-4698

5120-14-225-3198

5120-14-217-9926
Torque Wrench Adapter

142179926
0C0 1-4: RNCC: 3 | RNVC: 2
0C0-1-4: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-381-9265
Vise Jaw Caps

143819265
330A93-2003-28: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-265-9714
Matoir Pour Rubans

142659714
VTR200-1095: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-297-1950
Electrical Contact Inserter

142971950
8500-39: RNCC: 3 | RNVC: 2
8500-39A: RNCC: 5 | RNVC: 2
8500-39: RNCC: 5 | RNVC: 2
8500-391: RNCC: 5 | RNVC: 2
8500-39: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-385-2517
Pliers

143852517
1-10-009-00: RNCC: 3 | RNVC: 2
1-10-009: RNCC: 5 | RNVC: 2

26 Jul 1983

5120-14-309-7431
Bearing And Bushing Inserter

143097431
341A93-3508-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-228-5106
Spanner Wrench

142285106
06C155: RNCC: 3 | RNVC: 2
285-16: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-234-8123
Bras Elevateur De G

142348123
25759: RNCC: 3 | RNVC: 2

1 Jan 1967

Load More Results