What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 95 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 95 of 110

5120-14-566-4188
Face Spanner Wrench Socket

145664188
T651J3001101: RNCC: 3 | RNVC: 2

10 Nov 2010

5120-14-442-4289
Spanner Wrench

144424289
IF1033-145: RNCC: 3 | RNVC: 2
IF1033-146: RNCC: 5 | RNVC: 9

16 Oct 1990

5120-14-521-6331
Screwdriver Bit

145216331
ETOR.205/16: RNCC: 3 | RNVC: 2
0025525: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-514-0117
Open End Wrench

145140117
ENFD29159-17X19: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-291-8162
Socket Wrench Socket

142918162
NK.23: RNCC: 3 | RNVC: 2
91711476: RNCC: 5 | RNVC: 2
3148510365404: RNCC: 5 | RNVC: 2
NK-23: RNCC: 5 | RNVC: 2
NK23: RNCC: 5 | RNVC: 2
0036540: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-450-7478
Flat Tip Screwdriver

144507478
NO PRIMARY REF14-450-7478: RNCC: 3 | RNVC: 2
EI.5,5X150: RNCC: 5 | RNVC: 9
641300: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-446-3128
Guide

144463128
VTR401-2-10635: RNCC: 3 | RNVC: 2

13 Mar 1991

5120-14-375-0522
Cle A Panier

143750522
GSM196-010F6: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-393-3037
Cle A Tube

143933037
5-1881D43127-197: RNCC: 3 | RNVC: 2
K0385-9011528: RNCC: 3 | RNVC: 2
K0385-6BA: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-403-5293
Out Reglage Frein

144035293
365A94-3245-00: RNCC: 3 | RNVC: 2

21 Aug 1985

5120-14-541-1716
Hand Terminal Crimping Tool

145411716
457.6PB: RNCC: 3 | RNVC: 2
457-6PB: RNCC: 5 | RNVC: 2
457.6: RNCC: 5 | RNVC: 2

14 May 2004

5120-14-433-7885
Bearing And Bushing Inserter

144337885
330A93-2049-01: RNCC: 3 | RNVC: 2

9 Aug 1989

5120-14-523-7486
Socket Wrench Socket

145237486
888-457-200-1: RNCC: 3 | RNVC: 2

31 Jan 2001

5120-14-441-0378
Bearing And Bushing Inserter And Remover

144410378
8-0310UZ: RNCC: 3 | RNVC: 2

16 Aug 1990

5120-14-441-1764
Spanner Wrench Handle

144411764
MEH179-1: RNCC: 3 | RNVC: 2
89280412: RNCC: 5 | RNVC: 2

22 Aug 1990

5120-14-572-6181
Pole Extension

145726181
332A92-1195-12: RNCC: 3 | RNVC: 2
332A92119512: RNCC: 5 | RNVC: 2

17 Jul 2012

5120-14-430-7499
Open End Wrench

144307499
68507-077-1: RNCC: 3 | RNVC: 2
68507-077-1: RNCC: 5 | RNVC: 9

22 Mar 1989

5120-14-274-0827
Socket Head Screw Key

142740827
NO PRIMARY REF14-274-0827: RNCC: 3 | RNVC: 2
0124040: RNCC: 5 | RNVC: 2
83-4: RNCC: 5 | RNVC: 2
83.4: RNCC: 5 | RNVC: 2
0219643D00: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-407-2783
Mont Echang Outill

144072783
8813091000: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-451-7796
Emmancheur Mecaniqu

144517796
600090: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-354-6062
Etrier Dextraction

143546062
973475: RNCC: 3 | RNVC: 2
973475: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-573-2032
Spanner Wrench

145732032
D083227: RNCC: 3 | RNVC: 2

21 Sep 2012

5120-14-228-5114

5120-14-304-5602

5120-14-329-8915

5120-14-399-3356
Socket Head Screw Key Blade

143993356
MJK447-23: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-513-3798
Cross Tip Screwdriver

145133798
ADY.1X100VE: RNCC: 3 | RNVC: 2
0613 183 1: RNCC: 5 | RNVC: 2
3148510047362: RNCC: 5 | RNVC: 2
ADY.1X100VSE: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-222-7120
Open End Wrench

142227120
NO PRIMARY REF14-222-7120: RNCC: 3 | RNVC: 2
7187M4-5: RNCC: 5 | RNVC: 2
12-4-5X4-5: RNCC: 5 | RNVC: 9
85-691-5206: RNCC: 6 | RNVC: 9

1 Jan 1966

5120-14-521-6359
Socket Wrench Socket

145216359
NO PRIMARY REF14-521-6359: RNCC: 3 | RNVC: 2
S.30HL: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-299-7113
Offset Screwdriver

142997113
ARZ.6,5: RNCC: 3 | RNVC: 2
ARZ6,5: RNCC: 5 | RNVC: 2
12116: RNCC: 5 | RNVC: 2
ARZ6-5: RNCC: 5 | RNVC: 2
91535030: RNCC: 5 | RNVC: 2
3148510113401: RNCC: 5 | RNVC: 2
0011340: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-576-3030
Mechanical Puller S

145763030
8811426002: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-436-0287
Levier Etalon

144360287
RT32052: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-435-0490
Screwdriver Bit

144350490
0000862: RNCC: 3 | RNVC: 2
A-200SA1,5: RNCC: 5 | RNVC: 2

17 Oct 1989

5120-14-392-5665

5120-14-461-6921
Verin Tete

144616921
PL1DA002OR902006A: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-490-8906
Lime

144908906
4067 210 000 517: RNCC: 3 | RNVC: 2
F300 0T 000 5180: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-236-2447

5120-14-365-1612

5120-14-418-0386
Outil Regulateur

144180386
121603101: RNCC: 3 | RNVC: 9

6 Aug 1987

5120-14-208-0983

5120-14-360-5408

5120-14-505-9394
Flat Tip Screwdriver

145059394
ENFD6516-A1-2X6-5X100X215: RNCC: 3 | RNVC: 2
F300 0P 000 1297: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-454-2950
Emmanchement Outil

144542950
MMG052-49: RNCC: 3 | RNVC: 2
MMG052-49: RNCC: 5 | RNVC: 2

26 Mar 1992

5120-14-441-7294
Flat Tip Screwdriver

144417294
BN339-506C02-0-020: RNCC: 2 | RNVC: 2

17 Sep 1990

5120-14-247-8377
Cle Multiple Specia

142478377
80900-490: RNCC: 3 | RNVC: 2
80243-5: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-285-2400
Poincon Triangulair

142852400
845AFT5-300: RNCC: 2 | RNVC: 2

1 Jan 1972

5120-14-322-1345
Oeilleton Doutil

143221345
121E95-190-11-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-224-3086
Cle Speciale De Ser

142243086
96-2-1SM517: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-443-9748
Open End Wrench

144439748
GS120-02: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-551-1346
Socket Wrench Spanner Attachment

145511346
8400-20: RNCC: 3 | RNVC: 2
AA006705: RNCC: 6 | RNVC: 9

28 Aug 2006

5120-14-223-8984
Cle A Rochet Pour E

142238984
MAT196-0066F19: RNCC: 3 | RNVC: 2
GSM196-011F22: RNCC: 5 | RNVC: 2
GSM196-11F22: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-311-7464
Spanner Wrench

143117464
6800-1061: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-371-4266
Spanner Wrench

143714266
6254-57046: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-241-6093
Mandrin De Preserti

142416093
FF23X25N: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-573-0482
Dashpot Handling Tool

145730482
62114589AA: RNCC: 3 | RNVC: 2

7 Sep 2012

5120-14-329-3272
Bague De Montage

143293272
14369-5009: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-226-0330

5120-14-217-9963

5120-14-403-8199
Cle Special Feux

144038199
MUP5696: RNCC: 3 | RNVC: 2
6210-A1-004-2436: RNCC: 6 | RNVC: 9

21 Aug 1985

5120-14-378-5709
Gonflage Ensemble

143785709
UKC314-24: RNCC: 3 | RNVC: 2
UKC314-24: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-385-3467
Out Reglage Btp

143853467
6805P32-6000-02: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-547-1485
Spanner Wrench

145471485
PW2007: RNCC: 3 | RNVC: 2
6KK520: RNCC: 5 | RNVC: 2

28 Sep 2005

5120-14-463-3728
Pin Inserter And Remover

144633728
65-4-03-44LT00-554726C: RNCC: 3 | RNVC: 2
0416251Y00: RNCC: 5 | RNVC: 2
89471283: RNCC: 5 | RNVC: 2

9 Jun 1993

5120-14-556-5382
Spanner Wrench

145565382
2229: RNCC: 3 | RNVC: 2
CLE TRICOISE SESAME 8 FONCTIONS: RNCC: 5 | RNVC: 2

19 Mar 2008

5120-14-315-1885
Face Spanner Wrench Socket

143151885
0-700258: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-559-6769
Hand Manhole Cover Hook

145596769
89374 W: RNCC: 3 | RNVC: 9

5 Feb 2009

5120-14-395-0282
Stockage Mallette

143950282
853-201-287-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-380-4693
Moteur Cle Rotation

143804693
525724: RNCC: 3 | RNVC: 2
00525724: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-572-8436
Socket Wrench Socket

145728436
120005: RNCC: 3 | RNVC: 2
7612206012270: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-459-3307
Cle Speciale

144593307
DLP757290: RNCC: 3 | RNVC: 2
370109: RNCC: 5 | RNVC: 2

25 Nov 1992

5120-14-256-6013

5120-14-416-7658
Mandrin Presse

144167658
540665: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-241-6091

5120-14-548-8345
Flat Tip Screwdriver

145488345
AEMC.1,3: RNCC: 3 | RNVC: 2

16 Feb 2006

5120-14-516-9021
Socket Wrench Socket

145169021
R.3/8E: RNCC: 3 | RNVC: 2
00.44.00.35: RNCC: 5 | RNVC: 2

20 Oct 1999

5120-14-502-9651
Socket Head Screw Key

145029651
88.7: RNCC: 3 | RNVC: 2
3148511265659: RNCC: 5 | RNVC: 2
0126565: RNCC: 5 | RNVC: 9

17 Dec 1997

5120-14-300-7322

5120-14-317-0307

5120-14-387-1388
Cle Speciale

143871388
76545911500: RNCC: 3 | RNVC: 2
765459115: RNCC: 5 | RNVC: 2
765459115: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-256-7268

5120-14-493-3445
Cle

144933445
0411-60226: RNCC: 3 | RNVC: 2
F300 0T 012 4871: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-225-4013

5120-14-214-2915

5120-14-486-5873
Flat Tip Screwdriver

144865873
AZ.4X150: RNCC: 3 | RNVC: 2
AZ.4X150: RNCC: 5 | RNVC: 2
AZ.4X150: RNCC: 5 | RNVC: 2
3148510133867: RNCC: 5 | RNVC: 2
1091898G00: RNCC: 5 | RNVC: 2
250-5685: RNCC: 5 | RNVC: 2
0013386: RNCC: 5 | RNVC: 9
FACOMAZ.4X150: RNCC: 5 | RNVC: 9

26 Mar 1997

5120-14-350-5006
Extracteur Equipe

143505006
NO PRIMARY REF14-350-5006: RNCC: 3 | RNVC: 2
3135-3: RNCC: 5 | RNVC: 9

12 Jul 1978

5120-14-330-0879
Bride Dextraction

143300879
2101002005: RNCC: 3 | RNVC: 2
21-01-002005: RNCC: 5 | RNVC: 2
85-687-3932: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-222-7488

5120-14-295-2040

5120-14-568-5800
Bearing And Bushing Inserter And Remover

145685800
F27313000: RNCC: 3 | RNVC: 2
F27313000: RNCC: 5 | RNVC: 2

21 Jun 2011

5120-14-247-6176
Cle Pied De Corbeau

142476176
1118: RNCC: 3 | RNVC: 2
720713: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-200-9150

5120-14-329-3849

5120-14-238-6658

5120-14-437-2488
Screwdriver Bit

144372488
0857071A00: RNCC: 3 | RNVC: 2
85-694-2639: RNCC: 6 | RNVC: 9

24 Jan 1990

5120-14-319-1544
Bloc Pre-Sertissage

143191544
RMPS4F32X1M: RNCC: 3 | RNVC: 2
RMPS4F30X32M: RNCC: 5 | RNVC: 2
RMPS6F32X1M: RNCC: 5 | RNVC: 2
85-686-9685: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-453-3049
Detent Handling Tool

144533049
BZ0571: RNCC: 3 | RNVC: 2
85-694-3639: RNCC: 6 | RNVC: 9

12 Feb 1992

5120-14-425-5998
Socket Wrench Socket

144255998
NS.15/16: RNCC: 3 | RNVC: 2
3148510425801: RNCC: 5 | RNVC: 2
0042580: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-222-1424

5120-14-385-9787
Spanner Wrench

143859787
0.411/60120: RNCC: 3 | RNVC: 2
0411-60120: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-364-2644
Open End Wrench

143642644
10-38X39CP: RNCC: 3 | RNVC: 2
10-38X39CP: RNCC: 3 | RNVC: 2
4071-38X39CB: RNCC: 3 | RNVC: 9
85-800-8694: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-513-7311
Flat Tip Screwdriver

145137311
ENFD6561-0-4X2-5X100: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-213-3790
Cle Reglage

142133790
NO PRIMARY REF14-213-3790: RNCC: 3 | RNVC: 2
1-1038-02-57: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-418-3943
A Degoujonner Cle

144183943
567CT: RNCC: 3 | RNVC: 9
MUL567CT: RNCC: 5 | RNVC: 9

19 Aug 1987

5120-14-225-4038

5120-14-350-8559
Broche De Verrouill

143508559
319019120: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-226-3690

5120-14-321-5610

5120-14-569-2988
Aligning Punch

145692988
S47688: RNCC: 3 | RNVC: 2

1 Sep 2011

5120-14-520-5961
Face Spanner Wrench Socket

145205961
Z0104-932: RNCC: 3 | RNVC: 2
0104932: RNCC: 5 | RNVC: 2

24 May 2000

5120-14-222-7151
Open End Wrench

142227151
33-22X23: RNCC: 3 | RNVC: 2
3599057: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-366-1951
Pousse-Roulement

143661951
0-62136-3: RNCC: 3 | RNVC: 2
062136-3: RNCC: 5 | RNVC: 2
85-691-1451: RNCC: 6 | RNVC: 9

4 Nov 1980

5120-14-401-5654
Out Reglage Roulem

144015654
350A93-3709-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-475-9340
Hand Terminal Crimping Tool

144759340
69355-0: RNCC: 3 | RNVC: 2
85-686-2529: RNCC: 6 | RNVC: 9

10 May 1995

5120-14-370-3421
Terminal Crimping Tool Contact Positioner

143703421
1-483261-6: RNCC: 3 | RNVC: 2
345: RNCC: 5 | RNVC: 2
K345: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-269-4335
Saddler's Sewing Awl

142694335
B0BINEENBUISAVECALENE: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-269-4335: RNCC: 3 | RNVC: 2
B0BINEENBUISAVECALENE: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-424-1159
Six Point Tip Screwdriver

144241159
NO PRIMARY REF14-424-1159: RNCC: 3 | RNVC: 2
3148510040936: RNCC: 5 | RNVC: 2
ACX.9: RNCC: 5 | RNVC: 2
1060248N00: RNCC: 5 | RNVC: 2
0004093: RNCC: 5 | RNVC: 9

17 May 1988

5120-14-345-9673
Screwdriver And Wrench Assembly

143459673
JS5-5: RNCC: 3 | RNVC: 2
3148515060007: RNCC: 5 | RNVC: 2
JS5: RNCC: 5 | RNVC: 9

5 Nov 1977

5120-14-576-4320
Socket Wrench Socket Set

145764320
262156164: RNCC: 3 | RNVC: 2

19 Jun 2013

5120-14-273-6990

5120-14-247-3559

5120-14-532-2524
Socket Wrench Socket

145322524
R.13/32E: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-277-3079
Mandrin Montage Bag

142773079
13599770J: RNCC: 3 | RNVC: 2
59977: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-369-6975
Open End Wrench

143696975
BB77: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-342-8462
Demonte Suppo Outil

143428462
0-62119-0: RNCC: 3 | RNVC: 2
85-686-0705: RNCC: 6 | RNVC: 9

16 May 1977

5120-14-427-1505
Spanner Wrench

144271505
3511 192 18851: RNCC: 3 | RNVC: 2
89288280: RNCC: 5 | RNVC: 2
3511-192-18851: RNCC: 5 | RNVC: 2

6 Oct 1988

5120-14-392-5184
Face Spanner Wrench Socket

143925184
MHJ112-27: RNCC: 3 | RNVC: 2
MHJ112-27: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-313-7283
Cone Mise En Forme

143137283
S16-0605-0870: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-423-2186
Basculeur Cle Dyn

144232186
SP1733D-3-790: RNCC: 3 | RNVC: 2

13 Apr 1988

5120-14-308-3256

5120-14-461-6912
Carter Support Inf.

144616912
PL1DA002OR902002A: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-208-6031

5120-14-402-2385
Bague De Montage

144022385
36107: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-444-9254
Retaining Ring Pliers

144449254
NO PRIMARY REF14-444-9254: RNCC: 3 | RNVC: 2
0140660: RNCC: 5 | RNVC: 2
177.13: RNCC: 5 | RNVC: 2
1028466T00: RNCC: 5 | RNVC: 2
91714851: RNCC: 5 | RNVC: 2

29 Jan 1991

5120-14-317-0465
Pince De Bridage

143170465
RT5806: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-347-8708

5120-14-251-3166
Adaptateur

142513166
PR47384: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-528-2387
Outillage Montage

145282387
26145906933: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-14-261-9243
Cle Pour Voyant Lum

142619243
4075-100B073: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-040-0669
Appareil De Montage

140400669
NO PRIMARY REF14-040-0669: RNCC: 3 | RNVC: 2
BL43945: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-210-7346
Manual Impact Wrench

142107346
7-140481-9: RNCC: 3 | RNVC: 2
140481: RNCC: 5 | RNVC: 9
7-140481-9: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-468-9831
Seal Inserter And Remover

144689831
40N108335-2: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-347-2974
Tap And Reamer Wrench

143472974
831.1: RNCC: 3 | RNVC: 2
16491879-8: RNCC: 3 | RNVC: 2
3059000440: RNCC: 5 | RNVC: 2
91369727: RNCC: 5 | RNVC: 2
0657 1: RNCC: 5 | RNVC: 2
3148512066002: RNCC: 5 | RNVC: 2
831-1: RNCC: 5 | RNVC: 2
0206600: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-552-6139
Socket Wrench Socket

145526139
S.10AVSE: RNCC: 3 | RNVC: 2
3148510560335: RNCC: 5 | RNVC: 2
S.10AVSE: RNCC: 5 | RNVC: 2

18 Jan 2007

5120-14-232-7876
Offset Screwdriver

142327876
AKZ.6: RNCC: 3 | RNVC: 2
CFR2: RNCC: 3 | RNVC: 2
3148510067001: RNCC: 5 | RNVC: 2
AKZ6: RNCC: 5 | RNVC: 2
91577054: RNCC: 5 | RNVC: 2
0006700: RNCC: 5 | RNVC: 9
A210-1: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-461-3332
Bague Precontrainte

144613332
10035M33: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-14-518-0272
Six Point Tip Screwdriver

145180272
ENFD6576-15X80-6PANS: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-406-6188
Joints Emmanche

144066188
853-200-786-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-571-7330
Screwdriver Bit

145717330
NEV-T-27: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-217-2712

5120-14-508-5432
Plug Electrical Connector Extractor

145085432
057-0289-00A: RNCC: 3 | RNVC: 2
1121752P00: RNCC: 5 | RNVC: 2
P36588: RNCC: 5 | RNVC: 2
CD9057-0289-00.A: RNCC: 5 | RNVC: 2
CD-9-057-0289-00-A: RNCC: 5 | RNVC: 2
9-057-0289-00A: RNCC: 5 | RNVC: 2
057-0289-00A: RNCC: 5 | RNVC: 9

16 Sep 1998

5120-14-376-6312
Flat Tip Screwdriver

143766312
NO PRIMARY REF14-376-6312: RNCC: 3 | RNVC: 2
464-3-4: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-463-9780
A Main Matoir

144639780
854-500-332-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-265-3206
Socket Head Screw Key

142653206
23007046: RNCC: 3 | RNVC: 2
23007046-4: RNCC: 5 | RNVC: 2
31-10796HK1-5: RNCC: 5 | RNVC: 2
HK1-5: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-415-8250

5120-14-524-1549
Flat Tip Screwdriver

145241549
AE-1-5X35: RNCC: 3 | RNVC: 2
AE1-5X35: RNCC: 5 | RNVC: 2

7 Mar 2001

5120-14-239-4483
Electrical Contact Remover

142394483
809711: RNCC: 3 | RNVC: 2
11-7880-16: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-257-1183
Secteur Cle Dynamom

142571183
J200AX: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-410-3849
Jauge De Controle

144103849
809865: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-471-9899
Flat Tip Screwdriver

144719899
ATH.10X250: RNCC: 3 | RNVC: 2
3148510116204: RNCC: 5 | RNVC: 2
ATH10X250: RNCC: 5 | RNVC: 2
0011620: RNCC: 5 | RNVC: 9

28 Sep 1994

5120-14-263-7308
Soupape Du Soufflet

142637308
25082: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-325-0266
Turbi Montage Socle

143250266
0S20186: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-321-1382

5120-14-240-3871

5120-14-396-8289
Spanner Wrench

143968289
NO PRIMARY REF14-396-8289: RNCC: 3 | RNVC: 2
L121AAV302-3: RNCC: 5 | RNVC: 9
85-692-6223: RNCC: 6 | RNVC: 9

27 Nov 1984

5120-14-329-2781
Ensemble Sieges Sou

143292781
NO PRIMARY REF14-329-2781: RNCC: 3 | RNVC: 2
526409110: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-431-4822
Socket Head Screw Key

144314822
0372-42-10158: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-479-0631
Face Spanner Wrench Socket

144790631
OCE82-16I: RNCC: 3 | RNVC: 2
1115958Q00: RNCC: 5 | RNVC: 2

13 Dec 1995

5120-14-442-2424
Cle A Oeil

144422424
PR47646: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-328-1268
Spanner Wrench

143281268
A153-3-9: RNCC: 3 | RNVC: 2
3268: RNCC: 5 | RNVC: 2
85-692-2483: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-387-1198
Socket Head Screw Key

143871198
VTR321-2-1147: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-322-9755
Spanner Wrench

143229755
121E95-154-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-393-7994
Adjustable Wrench

143937994
NO PRIMARY REF14-393-7994: RNCC: 3 | RNVC: 2
93291947006-2: RNCC: 5 | RNVC: 2
99871947118: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-384-1988
Faux Mors

143841988
26-281-10: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-241-5634
Extracteur Piston D

142415634
0636-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-390-4838
Appareil A Deglasse

143904838
DLT587515: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-416-7562
Speciale Cle

144167562
537406: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-222-7483

5120-14-232-6354

5120-14-217-2696

5120-14-568-5683
Bearing And Bushing Inserter And Remover

145685683
F27319000: RNCC: 3 | RNVC: 2
F27319000: RNCC: 5 | RNVC: 2

21 Jun 2011

5120-14-457-7419
Broche D'arrimage

144577419
70936: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-14-355-1929
Socket Head Screw Key

143551929
NO PRIMARY REF14-355-1929: RNCC: 3 | RNVC: 2
12807-4: RNCC: 5 | RNVC: 9

19 Mar 1979

5120-14-368-0738
Flat Tip Screwdriver

143680738
ACZ.3,5X75: RNCC: 3 | RNVC: 2
3148510038230: RNCC: 5 | RNVC: 2
1028592L00: RNCC: 5 | RNVC: 2
AC.3,5X75: RNCC: 5 | RNVC: 2
91569699: RNCC: 5 | RNVC: 2
91638786: RNCC: 5 | RNVC: 2
0613 232 35: RNCC: 5 | RNVC: 2
AC3-5X75: RNCC: 5 | RNVC: 2
0003823: RNCC: 5 | RNVC: 9
ARN3-5X75: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-226-3138
Cle Speciale

142263138
60290-02-00-130M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-478-5854
Dappui Cone

144785854
Z0106-728: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-248-5658
Porte Cle

142485658
GSM196-021REP3: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-421-6393
Bloc Ali Extracteur

144216393
3511 101 48671: RNCC: 3 | RNVC: 2
3511-101-48671: RNCC: 5 | RNVC: 2

20 Jan 1988

5120-14-386-0298
Open End Wrench

143860298
10-24X25-P: RNCC: 3 | RNVC: 2
10-24X25P: RNCC: 5 | RNVC: 2
3272670262966: RNCC: 5 | RNVC: 2
10-24X25CP: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-276-3169
Socket Wrench Socket

142763169
C-1'5/8: RNCC: 3 | RNVC: 2
K.1'5/8A: RNCC: 3 | RNVC: 2
C1 5-8: RNCC: 3 | RNVC: 2
K1 5-8: RNCC: 3 | RNVC: 9
3272670210523: RNCC: 5 | RNVC: 2
3148510298252: RNCC: 5 | RNVC: 2
DEMK1 5-8: RNCC: 5 | RNVC: 9
0029825: RNCC: 5 | RNVC: 9
K1 5-8: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-298-1701
Flat Tip Screwdriver

142981701
201-1: RNCC: 3 | RNVC: 2
253-3: RNCC: 3 | RNVC: 2
20101: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-412-0171
Spanner Wrench

144120171
MN7062RUF1/1-94DN50: RNCC: 3 | RNVC: 2

24 Sep 1986

5120-14-335-6845
Open End Wrench

143356845
522-11-16X3-4: RNCC: 3 | RNVC: 9
DEM522-11-16X3-4: RNCC: 5 | RNVC: 9

30 Jun 1976

5120-14-406-5837
Speciale Pince

144065837
853-201-397-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-387-2773
Cle Frigoriste De 3

143872773
94-01-001-52: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-479-6304
Spanner Wrench

144796304
888-377-400-1: RNCC: 3 | RNVC: 2

24 Jan 1996

5120-14-342-6039

5120-14-410-0575
Hole Sheet Metal Holder

144100575
CB6-4: RNCC: 3 | RNVC: 2
CB6-4: RNCC: 3 | RNVC: 2
851-910-094-0: RNCC: 5 | RNVC: 2
M0-5551-4: RNCC: 5 | RNVC: 2
MO-5551/4: RNCC: 5 | RNVC: 2
CB6-4BLANC: RNCC: 5 | RNVC: 2
CB6-4: RNCC: 5 | RNVC: 9
MM6-4: RNCC: 5 | RNVC: 9

4 Jun 1986

5120-14-201-5531
Poincon A Chev Lame

142015531
NO PRIMARY REF14-201-5531: RNCC: 3 | RNVC: 2
108-4: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-233-4355

5120-14-274-7881
Flat Tip Screwdriver

142747881
E74-351-1-6X10X200R0NDEIS0LEE: RNCC: 2 | RNVC: 2
225-8: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-222-6202
Socket Wrench Socket

142226202
0028290: RNCC: 3 | RNVC: 2
J.7/16L: RNCC: 5 | RNVC: 2
J7/16L: RNCC: 5 | RNVC: 2
JL7-16: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-570-3187
Hand Screw Jack Extension

145703187
FAT71 345 11 P MARGOT 5000: RNCC: 3 | RNVC: 2

7 Dec 2011

5120-14-468-9666
Lot Reparation Mole

144689666
113.15-3: RNCC: 3 | RNVC: 2
3148511330203: RNCC: 5 | RNVC: 2
0133020: RNCC: 5 | RNVC: 9

30 Mar 1994

5120-14-279-8625

5120-14-255-2727
Arrache-Volant

142552727
510529: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-425-9519
Appareil Pour Emman

144259519
500349DTH20M2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-453-6196
Brosse Soudeur

144536196
140102: RNCC: 3 | RNVC: 2

3 Mar 1992

5120-14-224-9905

5120-14-283-4958
Cle Speciale

142834958
206993: RNCC: 3 | RNVC: 2
206993: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-249-3291
Embase Dextracteur

142493291
12202124: RNCC: 3 | RNVC: 2
12202124: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-454-9002
Mechanical Puller Attachment

144549002
U.53T3: RNCC: 3 | RNVC: 2
3148510703954: RNCC: 5 | RNVC: 2
U53T3: RNCC: 5 | RNVC: 2
91729326: RNCC: 5 | RNVC: 2
0070395: RNCC: 5 | RNVC: 9

24 Apr 1992

5120-14-391-8762
Extraction Outil

143918762
50MS061-29: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-414-8337
Outillage

144148337
035-42962-0: RNCC: 3 | RNVC: 9

12 Mar 1987

5120-14-279-8332
Axe De Reglage

142798332
60290-31-040M1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-247-9727
Face Spanner Wrench Socket

142479727
160-71960-09: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-406-6514
Bronze Jet

144066514
853-201-949-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-212-9106
Rallonge Speciale O

142129106
9970-115-034: RNCC: 3 | RNVC: 2
9970-115-034-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-282-0731

5120-14-265-2800

5120-14-413-5640

5120-14-241-6035
Bloc De Presertissa

142416035
RMPS12M: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-491-0158
Cle

144910158
4602 007 200 184: RNCC: 3 | RNVC: 2
F300 0T 001 0946: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0209
Necessa

144910209
4602 010 600 010: RNCC: 3 | RNVC: 2
F300 0T 001 1004: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-473-9990
Outil Collage

144739990
PSNGCV002REP2: RNCC: 3 | RNVC: 2

20 Jan 1995

5120-14-232-9941
Matrice De Sertissa

142329941
48932: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-248-5649

5120-14-285-5508

5120-14-548-5105
Socket Wrench Socket

145485105
M.2'1/8HA: RNCC: 3 | RNVC: 2
M.54HA: RNCC: 3 | RNVC: 2
00.52.20.79: RNCC: 5 | RNVC: 2

24 Jan 2006

5120-14-414-9543
Cle Serre Tu Chaine

144149543
NO PRIMARY REF14-414-9543: RNCC: 3 | RNVC: 2
137C3 1/2: RNCC: 5 | RNVC: 9

26 Mar 1987

5120-14-443-6313
Monte Segment

144436313
NO PRIMARY REF14-443-6313: RNCC: 3 | RNVC: 2
OU130409-1: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-272-3580

5120-14-217-2673
Cle Ecrou Fourrure

142172673
M12-017: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-577-3000
Torque Wrench Multiplier

145773000
DP-80: RNCC: 3 | RNVC: 2

4 Sep 2013

5120-14-463-1427
Cle De Maintien

144631427
50400: RNCC: 3 | RNVC: 2
85-695-0311: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-578-6413
Solid Center Punch

145786413
28625 CVB: RNCC: 3 | RNVC: 2
28625: RNCC: 5 | RNVC: 9

16 Dec 2013

5120-14-290-7521
Extracteur Special

142907521
P30: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-541-1105
Open End Wrench

145411105
1SH41743107: RNCC: 3 | RNVC: 2

14 May 2004

5120-14-382-5692
Electrical Card Extractor

143825692
16928177: RNCC: 3 | RNVC: 2
16928177: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-330-7060
Rotation Pales Bras

143307060
BR4X512: RNCC: 3 | RNVC: 2
4X512: RNCC: 5 | RNVC: 2
85-100-4928: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-483-2837
Spanner Wrench

144832837
70025242: RNCC: 3 | RNVC: 2
F104192-00: RNCC: 5 | RNVC: 2
104192: RNCC: 5 | RNVC: 2
F104192-00: RNCC: 5 | RNVC: 2
70025242: RNCC: 5 | RNVC: 9

29 Aug 1996

5120-14-302-7978
Hand Powered Poppet Valve Lapper

143027978
NO PRIMARY REF14-302-7978: RNCC: 3 | RNVC: 2
0425: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-393-0283
Combination Box And Open End Wrench

143930283
41.23: RNCC: 3 | RNVC: 2
3148511013700: RNCC: 5 | RNVC: 2
41-23: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-523-2223
Spanner Wrench

145232223
Q47805-1000: RNCC: 3 | RNVC: 2

10 Jan 2001

5120-14-522-4035
Flat Tip Screwdriver

145224035
AEF-2X15: RNCC: 3 | RNVC: 2
AEF2X15: RNCC: 5 | RNVC: 2

26 Oct 2000

5120-14-444-4566
Open End Wrench

144444566
231491: RNCC: 3 | RNVC: 2
85-694-3563: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-454-9339
Socket Wrench Extension

144549339
S.211: RNCC: 3 | RNVC: 2
3148510579108: RNCC: 5 | RNVC: 2
0057910: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-478-1968
Cross Tip Screwdriver Set

144781968
NO PRIMARY REF14-478-1968: RNCC: 3 | RNVC: 2
3148515003202: RNCC: 5 | RNVC: 2
ACD.JS5: RNCC: 5 | RNVC: 2
ACDJS5: RNCC: 5 | RNVC: 2
0238640A00: RNCC: 5 | RNVC: 2
0500320: RNCC: 5 | RNVC: 9

16 Oct 1995

5120-14-306-3453
Spanner Wrench

143063453
330A98-3379-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-219-3476
Cle Speciale

142193476
58650: RNCC: 3 | RNVC: 2
V2-95-614: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-576-9356
Socket Wrench Screwdriver Attachment

145769356
14100107534: RNCC: 3 | RNVC: 2

23 Jul 2013

5120-14-271-1240
Extracteur Axe Bati

142711240
160Z0888079: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-576-2035
Mechanical Puller

145762035
S661V3602101: RNCC: 3 | RNVC: 2

5 Jun 2013

5120-14-344-6853

5120-14-205-6179

5120-14-383-6519
Vise Jaw Caps

143836519
S10-0150-0841: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-418-1888
Emmanch Frein Ecrou

144181888
332A93-3127-20: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-395-3440
Spanner Wrench

143953440
A0182-095F3: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-478-5826
Depose Cle

144785826
0S22345: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-040-0675
Appareil De Montage

140400675
NO PRIMARY REF14-040-0675: RNCC: 3 | RNVC: 2
BL43953: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-469-9031
Vis A Emp Tournevis

5120-14-490-6966
Mattock

144906966
241 M 00720 000: RNCC: 3 | RNVC: 2
F300 0T 000 1108: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8823
Marteau

144908823
4066 241 100 000: RNCC: 3 | RNVC: 2
F300 0T 000 5095: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-370-4532

5120-14-563-7748
Flat Tip Screwdriver

145637748
AWH8X175: RNCC: 3 | RNVC: 2
0774137: RNCC: 5 | RNVC: 2
3148517741379: RNCC: 5 | RNVC: 2

12 Mar 2010

5120-14-379-3639
A Fourch Tournevis

143793639
004331005P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-490-8944
Tenaill

144908944
4067 320 000 851: RNCC: 3 | RNVC: 2
F300 0T 000 5221: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0141
Cle

144910141
4602 007 200 074: RNCC: 3 | RNVC: 2
F300 0T 001 0927: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-415-2549
Outil Emmanchement

144152549
6301D23056: RNCC: 3 | RNVC: 2
85-692-9459: RNCC: 6 | RNVC: 9

22 Apr 1987

5120-14-400-9200
Serrage Cle

144009200
M31-139: RNCC: 3 | RNVC: 2

21 May 1985

5120-14-466-2567
Axe Emmanche

144662567
0XB501-009-400-53: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-503-8374
Open End Wrench

145038374
10-13X14-P: RNCC: 3 | RNVC: 2
10-13X14P: RNCC: 3 | RNVC: 2
3272670250239: RNCC: 5 | RNVC: 2

30 Jan 1998

5120-14-317-4915
Wrench Kit

143174915
NO PRIMARY REF14-317-4915: RNCC: 3 | RNVC: 2
HB2: RNCC: 5 | RNVC: 2
91519065: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-529-8526
Detent Handling Tool

145298526
7107-1460-048: RNCC: 3 | RNVC: 2
YM1099A00: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-449-6829
Spanner Wrench

144496829
OUT-20MS17: RNCC: 3 | RNVC: 2

2 Sep 1991

5120-14-040-1996
Spanner Wrench

140401996
NO PRIMARY REF14-040-1996: RNCC: 3 | RNVC: 2
BL43943: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-368-5048
Face Spanner Wrench Socket

143685048
MHJ166-22: RNCC: 3 | RNVC: 2
MHJ166-22: RNCC: 5 | RNVC: 2
85-691-0051: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-315-1249
Wrench Kit

143151249
MD003-10-00REP1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-506-1380
Cle Tape De Pont

145061380
MAT196-1137: RNCC: 3 | RNVC: 2

8 Apr 1998

5120-14-391-3471
Serre-Segments

143913471
90890-06134: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-206-3624
Socket Head Screw Key

142063624
NO PRIMARY REF14-206-3624: RNCC: 3 | RNVC: 2
26865: RNCC: 5 | RNVC: 2
TRT26865: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-276-3241
Blacksmith's Top Swage

142763241
M0B17-8EC: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-569-3069
Mechanical Puller

145693069
F27585000-1: RNCC: 3 | RNVC: 2
F27585000: RNCC: 3 | RNVC: 9
F27585000: RNCC: 5 | RNVC: 9

1 Sep 2011

5120-14-490-6877
Drill

144906877
240 D 01878 050: RNCC: 3 | RNVC: 2
F300 0T 000 0986: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-337-5388
Secteur De Serrage

143375388
0057100: RNCC: 3 | RNVC: 2
S.200A: RNCC: 5 | RNVC: 2
S200A: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-249-3954
Tete-Guide Emmanche

142493954
3210-97-33-108: RNCC: 3 | RNVC: 2
08-341: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-226-0004

5120-14-480-2610
Torque Wrench Adapter

144802610
888-387-900-1: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-323-1989
Open End Wrench

143231989
RAC1 3-8: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-010-1021
Cle Brochee

140101021
8810007088: RNCC: 3 | RNVC: 2
6-000-180: RNCC: 5 | RNVC: 2

1 Jan 1961

5120-14-337-0848
Outil D'installatio

143370848
380306-2: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-461-7762
Circuit Plateau

144617762
0225410: RNCC: 3 | RNVC: 2
1157.M: RNCC: 5 | RNVC: 2
1157M: RNCC: 5 | RNVC: 2

24 Mar 1993

5120-14-229-3356
Ecrou Extracteur

142293356
885H2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-352-9016
Outil A Freiner Cuv

143529016
3CGF152: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-488-3144
Flat Tip Screwdriver

144883144
AE.2,5X35: RNCC: 3 | RNVC: 2
3148510048604: RNCC: 5 | RNVC: 2
AE2-5X35: RNCC: 5 | RNVC: 2
0004860: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-528-4679
Drift

145284679
888-466-700-1: RNCC: 3 | RNVC: 2
888-466-700-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-358-5598
Electrical Card Extractor

143585598
16332701: RNCC: 3 | RNVC: 2
A16332701: RNCC: 3 | RNVC: 2
A16332701: RNCC: 3 | RNVC: 9
540020: RNCC: 5 | RNVC: 2
16332701: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-477-4339
Crochet Extract.Spe

144774339
703277: RNCC: 3 | RNVC: 2

30 Aug 1995

5120-14-570-9490
Torque Wrench

145709490
14100086727: RNCC: 3 | RNVC: 2

7 Feb 2012

5120-14-393-8841
Bague De Retrait

143938841
NO PRIMARY REF14-393-8841: RNCC: 3 | RNVC: 2
OU136521: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-536-5288
Combination Box And Open End Wrench

145365288
40R.9/16: RNCC: 3 | RNVC: 2
3148511012024: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-389-4200
Feuillard Tendeur

143894200
STD502-504: RNCC: 3 | RNVC: 2
STD502-4: RNCC: 5 | RNVC: 2

20 Dec 1983

5120-14-440-1646
Spanner Wrench

144401646
853-100-274-0: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-342-8115
Spanner Wrench

143428115
35AM004: RNCC: 3 | RNVC: 2
85-689-3603: RNCC: 6 | RNVC: 9

16 May 1977

5120-14-377-3009
Outil Decarte Culbu

143773009
MG028-26-00: RNCC: 3 | RNVC: 2
MG028-26-00: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-216-7880
Open End Wrench

142167880
11-1 1-2X1 5-8: RNCC: 3 | RNVC: 2
33-1-1-2-1-5-8: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-391-2066
Socket Wrench Socket

143912066
J.23H: RNCC: 3 | RNVC: 2
J23H: RNCC: 5 | RNVC: 2
3148510275505: RNCC: 5 | RNVC: 2
00.46.07.48: RNCC: 5 | RNVC: 2
0027550: RNCC: 5 | RNVC: 9

1 Mar 1984

5120-14-288-9792
Socket Head Screw Key

142889792
84.7: RNCC: 3 | RNVC: 2
67-7: RNCC: 3 | RNVC: 2
802-7: RNCC: 3 | RNVC: 2
188-7: RNCC: 3 | RNVC: 9
802-7: RNCC: 5 | RNVC: 2
91399376: RNCC: 5 | RNVC: 2
84-7: RNCC: 5 | RNVC: 2
3148511249505: RNCC: 5 | RNVC: 2
3272670280274: RNCC: 5 | RNVC: 2
DEM188-7: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-427-2100
Extracteur Support

144272100
46AM081-00-0002: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-216-0037

5120-14-223-3571

5120-14-296-5493
Rupteur Filet Rappo

142965493
35061222: RNCC: 3 | RNVC: 2
35061422: RNCC: 5 | RNVC: 2
35051223: RNCC: 5 | RNVC: 2
35051224: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-516-2251
Socket Head Screw Key

145162251
0020653: RNCC: 3 | RNVC: 2

15 Sep 1999

5120-14-437-2117
Spanner Wrench

144372117
0490-210005: RNCC: 3 | RNVC: 2

23 Jan 1990

5120-14-251-1379
Quick Adjusting Screw Clamp

142511379
202504: RNCC: 3 | RNVC: 2
FL202504: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-220-7925
Open End Wrench

142207925
RACC23: RNCC: 3 | RNVC: 2
RACC23: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-217-9943
Torque Wrench Adapter

142179943
0D07: RNCC: 3 | RNVC: 2
0D07: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-494-1394
Cle

144941394
10259656: RNCC: 3 | RNVC: 2
F300 0T 015 7119: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-334-0438

5120-14-279-8372

5120-14-578-1853
Mechanical Puller

145781853
PAAE223310-PAAE223312-800 026: RNCC: 3 | RNVC: 2

7 Nov 2013

5120-14-042-3573
Pre-Sertissage Bloc

140423573
RMPS5F10X1-2M: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-352-0837
Outil Definiti Cale

143520837
341A93-3129-00: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-421-0709
Pince Cloche

144210709
6254-58480: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-349-9405
Support Poignee Eq

143499405
P3H003363-00: RNCC: 3 | RNVC: 2
3H003363-00: RNCC: 5 | RNVC: 2
3H003363-00: RNCC: 5 | RNVC: 9
P3H003363-00: RNCC: 5 | RNVC: 9

14 Jun 1978

5120-14-408-9709
Socket Wrench Adapter-Extension

144089709
J01032-00-0000P005: RNCC: 3 | RNVC: 2

9 Apr 1986

5120-14-276-3104
Socket Wrench Socket

142763104
S13L: RNCC: 3 | RNVC: 2
SL-13: RNCC: 3 | RNVC: 2
SL13: RNCC: 3 | RNVC: 2
3272670240780: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-442-8281
Cross Tip Screwdriver

144428281
GS205-3: RNCC: 3 | RNVC: 2
1.70.3320: RNCC: 5 | RNVC: 2
GS205-03: RNCC: 5 | RNVC: 2

6 Nov 1990

5120-14-391-2075
Socket Wrench Ratchet Attachment

143912075
C-150-1': RNCC: 3 | RNVC: 2
C150 1: RNCC: 3 | RNVC: 2
3272670272033: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-419-4141
Flat Tip Screwdriver

144194141
NO PRIMARY REF14-419-4141: RNCC: 3 | RNVC: 2
3148510040059: RNCC: 5 | RNVC: 2
ACH.14X250: RNCC: 5 | RNVC: 2
ACH14X250: RNCC: 5 | RNVC: 2
1057428C00: RNCC: 5 | RNVC: 2
3059001870: RNCC: 5 | RNVC: 9
0004005: RNCC: 5 | RNVC: 9

16 Oct 1987

5120-14-216-5152
Screwdriver Bit

142165152
ST.7/16: RNCC: 3 | RNVC: 2
3148515189609: RNCC: 5 | RNVC: 2
ST7-16: RNCC: 5 | RNVC: 2
0518960: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-401-5186
Jeu Brucelles

144015186
NO PRIMARY REF14-401-5186: RNCC: 3 | RNVC: 2
0533990: RNCC: 5 | RNVC: 2
147.J 1: RNCC: 5 | RNVC: 2
147J1: RNCC: 5 | RNVC: 2
91519064: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-221-8234
Cle Tension Cables

142218234
2501-93-13065: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-283-1681
Cle Speciale

142831681
761-3M735P14: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-327-8643
Socket Wrench Handle Bar

143278643
75S125: RNCC: 3 | RNVC: 2
85-686-7634: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-349-4056
Spanner Wrench

143494056
M31-113: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-212-9171
Cle Speciale Double

142129171
9970-115-209: RNCC: 3 | RNVC: 2
9970-115-209-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-427-2520
Spanner Wrench

144272520
488402M83-06P4: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-200-5798
Flat Tip Screwdriver

142005798
ENFD5234E5X150: RNCC: 3 | RNVC: 2
230-150: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-410-6079
Rotating Members Aligning Tool

144106079
14400653J: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-421-8226
Socket Wrench Socket

144218226
3215528: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-554-8356
Socket Head Screw Key

145548356
SP.15791: RNCC: 3 | RNVC: 2
61103825: RNCC: 5 | RNVC: 2

29 Aug 2007

5120-14-506-7645
De Montage Outil

145067645
M12430: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-578-0081
Ratchet Lever Puller Handle

145780081
BM412441: RNCC: 3 | RNVC: 2
5120MT0200525: RNCC: 6 | RNVC: 9

22 Oct 2013

5120-14-460-1937
Spanner Wrench

144601937
PL1BV602OX890004A: RNCC: 3 | RNVC: 2

14 Jan 1993

5120-14-271-6110

5120-14-435-7356
Sertisseur Roulemen

144357356
1313: RNCC: 3 | RNVC: 2
85-693-3809: RNCC: 6 | RNVC: 9

22 Nov 1989

5120-14-315-0650
Open End Wrench

143150650
1872-13: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-407-8864
Combination Box And Open End Wrench

144078864
40.3,2H: RNCC: 3 | RNVC: 2
3148511000007: RNCC: 5 | RNVC: 2
40-3-2H: RNCC: 5 | RNVC: 2
91778008: RNCC: 5 | RNVC: 2
0100000: RNCC: 5 | RNVC: 9

5 Mar 1986

5120-14-217-3643
Clef Plate Speciale

142173643
NO PRIMARY REF14-217-3643: RNCC: 3 | RNVC: 2
225240: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-329-6314
Outillage Maintien

143296314
M31-019: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-300-9493
Semelle Verin Hydra

143009493
341A91-0049-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-275-8588
Cle Verrouillage Po

142758588
6600-2026: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-403-5718
Bearing And Bushing Inserter

144035718
330A93-2020-01: RNCC: 3 | RNVC: 2

21 Aug 1985

5120-14-248-3539

5120-14-396-2335
Extracte Presse Axe

143962335
90890-02341: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-369-6981
Socket Head Screw Key

143696981
174-1-864: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-373-7810
Mechanical Finger

143737810
826.0: RNCC: 3 | RNVC: 2
3148512061403: RNCC: 5 | RNVC: 2
826-0: RNCC: 5 | RNVC: 2
1114521A00: RNCC: 5 | RNVC: 2
91519073: RNCC: 5 | RNVC: 2
0206140: RNCC: 5 | RNVC: 9

13 Nov 1981

5120-14-576-7859
Torque Wrench

145767859
DYT-25-0: RNCC: 3 | RNVC: 2

15 Jul 2013

5120-14-406-9412
Emmanchement Outil

144069412
853-700-270-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-385-9793
Spanner Wrench

143859793
0.411/60140: RNCC: 3 | RNVC: 2
0411-60140: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-437-3575
Spanner Wrench

144373575
J00650-01S140P016: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-390-4836
Outillage De Palier

143904836
DLP753430: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-406-6574
Montage Guide

144066574
853-200-851-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-385-3453
Bearing And Bushing Inserter

143853453
6804J32-3004-03: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-260-2332
Extracteur

142602332
M12-060: RNCC: 3 | RNVC: 2
7M311B: RNCC: 5 | RNVC: 2
7M311C: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-575-1508
Drive Pin Punch

145751508
41355: RNCC: 3 | RNVC: 2

15 Mar 2013

5120-14-295-2598

5120-14-221-9589
Cle Speciale Pour V

142219589
NO PRIMARY REF14-221-9589: RNCC: 3 | RNVC: 2
144HL145: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-407-4584
Outillage Special M

144074584
3511 180 74371: RNCC: 3 | RNVC: 2
3511-180-74371: RNCC: 5 | RNVC: 2

19 Feb 1986

5120-14-276-3176
Socket Wrench Socket

142763176
0055660: RNCC: 3 | RNVC: 2
65LT1-2: RNCC: 3 | RNVC: 2
SL-12: RNCC: 3 | RNVC: 2
SL1-2: RNCC: 3 | RNVC: 2
S1-2L: RNCC: 5 | RNVC: 2
3272670236769: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-352-5459
Cle Decrou De Dome

143525459
FH152-913-10: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-222-7152
Open End Wrench

142227152
33-22X24: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-378-3902
Electrical Contact Inserter And Remover

143783902
001100 332 00: RNCC: 3 | RNVC: 2
001100-332-00: RNCC: 5 | RNVC: 2
91526084: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-514-1236
Six Point Tip Screwdriver

145141236
ENFD6566-2-5X14X250: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-309-6625
Positionneur Sertis

143096625
L16-3191-2: RNCC: 3 | RNVC: 2
85-635-1800: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-324-4924
Cone De Guidage

143244924
C47496: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-217-0047
Cle Pour Accumulate

142170047
AC79579A: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-226-3712

5120-14-492-1066
Tournevis

144921066
300012: RNCC: 3 | RNVC: 2
F300 0T 006 9505: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-6685
Kit

144916685
NO PRIMARY REF14-491-6685: RNCC: 3 | RNVC: 2
2235045705: RNCC: 5 | RNVC: 9
F300 0T 003 8485: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-247-3719
Cle Col De Cygne Sp

142473719
PR46606: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-420-7181
Pince Cloche

144207181
6511-58422: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-438-5069
Maintien Outillage

144385069
M46858: RNCC: 3 | RNVC: 2
85-694-2104: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-247-2134
Tournevis Dzus

142472134
1180: RNCC: 3 | RNVC: 2
DZUS10: RNCC: 5 | RNVC: 2
85-691-8632: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-367-6229
Verins Cric Adaptat

143676229
122PAA: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-224-9910

5120-14-424-5655
Socket Wrench Socket

144245655
J.24H: RNCC: 3 | RNVC: 2
00.46.08.49: RNCC: 5 | RNVC: 2
3148510275550: RNCC: 5 | RNVC: 2
J-24H: RNCC: 5 | RNVC: 2
91739696: RNCC: 5 | RNVC: 2
0027555: RNCC: 5 | RNVC: 9

31 May 1988

5120-14-326-0182
Mechanical Puller Attachment

143260182
NO PRIMARY REF14-326-0182: RNCC: 3 | RNVC: 2
151932-2: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-401-4646
Hand Material Handling Hook

144014646
853-200-266-0: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-533-4134
Socket Wrench Socket

145334134
D02012-1-016: RNCC: 3 | RNVC: 2

5 Feb 2003

5120-14-444-9310
Outillage De Nettoy

144449310
1029801B00: RNCC: 3 | RNVC: 2

29 Jan 1991

5120-14-214-3093

5120-14-214-8311

5120-14-398-2433
Essai Support

143982433
MKT046-03: RNCC: 3 | RNVC: 2
MKT046-03: RNCC: 5 | RNVC: 2

31 Jan 1985

5120-14-332-3826
Face Spanner Wrench Socket

143323826
M31-035: RNCC: 3 | RNVC: 2
M31-035: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-385-3483
Bearing And Bushing Inserter

143853483
6807J34-1003-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-387-1923
De Montage Obus

143871923
MGF233-43: RNCC: 3 | RNVC: 2
MGF233-43: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-439-6138
Bearing And Bushing Inserter

144396138
6201K33-2100-00: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-286-7855

5120-14-234-3697
Appareil Montage Co

142343697
202481: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-236-2622

5120-14-455-9781
Montage Outillage

144559781
098144: RNCC: 3 | RNVC: 2

11 Jun 1992

5120-14-491-0122
Cle

144910122
4602 007 200 026: RNCC: 3 | RNVC: 2
F300 0T 001 0908: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-352-1593

5120-14-264-7890
Blacksmith's Top Swage

142647890
647-18: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-394-1883
Kit De Montage

143941883
15309-4-0795-769-9: RNCC: 3 | RNVC: 2

23 Jun 1984

5120-14-370-6136
Equipe Vis De Verin

143706136
10-5205-510A: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-274-8695
Extenseur Ensemble

142748695
R31674-14-18R18: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-385-3419
Support Torquage

143853419
6802P32-5424-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-440-5435
Cle

144405435
51993: RNCC: 3 | RNVC: 2
85-694-1118: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-540-9871
Blind Riveter Nosepiece

145409871
359-E-34: RNCC: 3 | RNVC: 2
359E34: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-316-1609
Outil Emmench Bague

143161609
A129582: RNCC: 3 | RNVC: 2
100298: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-347-7028
Enclume Pose Rivet

143477028
23521080023: RNCC: 3 | RNVC: 2
2352-108-00-20-3: RNCC: 5 | RNVC: 2
85-800-4897: RNCC: 6 | RNVC: 9

1 Mar 1978

5120-14-244-4139
Socket Wrench Socket

142444139
J-18: RNCC: 3 | RNVC: 2
J18: RNCC: 3 | RNVC: 2
3272670281196: RNCC: 5 | RNVC: 2
74J18: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-404-1088
Open End Wrench

144041088
10-21X23-P: RNCC: 3 | RNVC: 2
10-21X23P: RNCC: 3 | RNVC: 2
3272670293908: RNCC: 5 | RNVC: 2
10-21X23CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-415-9269
Socket Wrench Extension

144159269
851-601-093-0: RNCC: 3 | RNVC: 2

26 May 1987

5120-14-413-5821
Socket Head Screw Key

144135821
803-1: RNCC: 3 | RNVC: 2
80301: RNCC: 5 | RNVC: 2
803-1: RNCC: 5 | RNVC: 2

17 Dec 1986

5120-14-359-5829
Flat Tip Screwdriver

143595829
AFR.4X125: RNCC: 3 | RNVC: 2
3148510056005: RNCC: 5 | RNVC: 2
0613 170 4: RNCC: 5 | RNVC: 2
AFR4X125: RNCC: 5 | RNVC: 2
0235178T00: RNCC: 5 | RNVC: 2
162-5896: RNCC: 5 | RNVC: 2
FACOMAFR.4X125: RNCC: 5 | RNVC: 9
0005600: RNCC: 5 | RNVC: 9

15 Oct 1979

5120-14-248-7499

5120-14-241-6058

5120-14-415-0259
Tube Packing Ring Installing Tool

144150259
65-6-05-045G00-626318C: RNCC: 3 | RNVC: 2
0416195A00: RNCC: 5 | RNVC: 2
045G00-416195A: RNCC: 5 | RNVC: 2
416195A: RNCC: 5 | RNVC: 2
89414811: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-200-2097
Offset Screwdriver

142002097
8810195006: RNCC: 3 | RNVC: 2
800-01-541-00: RNCC: 5 | RNVC: 2
8000154100: RNCC: 5 | RNVC: 2
881-0-195-006: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-471-9921
Open End Wrench

144719921
0104680: RNCC: 3 | RNVC: 2
44-1-1-16X1-1-8: RNCC: 5 | RNVC: 2
44.1'1/16X1'1/8: RNCC: 5 | RNVC: 2

28 Sep 1994

5120-14-214-1383
Spanner Wrench

142141383
8810024000: RNCC: 3 | RNVC: 2
800-00-597-00: RNCC: 5 | RNVC: 2
881-0-024-000: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-433-6320
Pliers

144336320
6269-58521: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-222-1406
Sheet Metalworking Dolly Block

142221406
0286000601: RNCC: 3 | RNVC: 2
286-105X75: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-393-7054
Socket Head Screw Key

143937054
6600-1160: RNCC: 3 | RNVC: 2
464206: RNCC: 5 | RNVC: 9

13 Jun 1984

5120-14-202-0370
Blacksmith's Top Swage

142020370
3831-20EMMANCHE: RNCC: 3 | RNVC: 2
M0B17-20EC: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-437-9125
Electronic Equipment Alignment Tool

144379125
07900556: RNCC: 3 | RNVC: 2
85-693-7568: RNCC: 6 | RNVC: 9

28 Feb 1990

5120-14-374-6717
Socket Head Screw Key

143746717
0U-043-03-P7: RNCC: 3 | RNVC: 2
M10410: RNCC: 5 | RNVC: 2

30 Jan 1982

5120-14-421-2067
Socket Head Screw Key Set

144212067
NO PRIMARY REF14-421-2067: RNCC: 3 | RNVC: 2
62TR10: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-382-7071
Axe Extracteur

143827071
6390-121E27-503-50-1: RNCC: 3 | RNVC: 2
6390-121E27-503-50-1: RNCC: 5 | RNVC: 2

17 Feb 1983

5120-14-340-8511

5120-14-239-9041

5120-14-466-5921
Bearing And Bushing Inserter And Remover

144665921
851-500-013-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-485-8281
Pose Ecrou

144858281
825.MT: RNCC: 3 | RNVC: 2
3148512061021: RNCC: 5 | RNVC: 2
0206102: RNCC: 5 | RNVC: 9

17 Feb 1997

5120-14-490-9459
Raccord

144909459
4280 020 000 070: RNCC: 3 | RNVC: 2
F300 0T 000 7133: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-396-1847

5120-14-222-7399
Open End Wrench

142227399
22.6X7: RNCC: 3 | RNVC: 2
22-6X7: RNCC: 5 | RNVC: 2
3148510947402: RNCC: 5 | RNVC: 2
0094740: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-320-0454
Cle De Tiroir

143200454
523602-000: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-434-9912
Flat Tip Screwdriver

144349912
ARB.5,5X40: RNCC: 3 | RNVC: 2
3148510107004: RNCC: 5 | RNVC: 2
ARB5-5X40: RNCC: 5 | RNVC: 2
91355126: RNCC: 5 | RNVC: 2
0010700: RNCC: 5 | RNVC: 9

11 Oct 1989

5120-14-476-3258
Socket Wrench Socket

144763258
R.10LA: RNCC: 3 | RNVC: 2
3148510513058: RNCC: 5 | RNVC: 2
0051305: RNCC: 5 | RNVC: 2
R10LA: RNCC: 5 | RNVC: 2
0183015K00: RNCC: 5 | RNVC: 2
235-4006: RNCC: 5 | RNVC: 2
FACOMR.10LA: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-200-8596
Spanner Wrench

142008596
110-18-100: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-393-3039
Tournevis

143933039
5-1881D43127-203: RNCC: 3 | RNVC: 2
K0385-9011420: RNCC: 3 | RNVC: 2
K0385-6INX5-16: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-421-2776
Screwdriver Bit

144212776
89471284: RNCC: 1 | RNVC: 2
044U50-731072M: RNCC: 3 | RNVC: 2
0731072M00: RNCC: 5 | RNVC: 2
89471284: RNCC: 5 | RNVC: 9

14 Jan 1988

5120-14-233-4393

5120-14-248-3537
Mandrin

142483537
0M143750V1-4D: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-349-3851
Sonde Cle A Talon

143493851
9970-115-626: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-488-5589
Flat Tip Screwdriver Set

144885589
HB.2B: RNCC: 3 | RNVC: 2
0027051: RNCC: 5 | RNVC: 2
HB2B: RNCC: 5 | RNVC: 2
205-5103: RNCC: 5 | RNVC: 2
0715 34 46: RNCC: 5 | RNVC: 2
3148510270517: RNCC: 5 | RNVC: 2
FACOMHB.2B: RNCC: 5 | RNVC: 9

21 May 1997

5120-14-276-3165
Socket Wrench Socket

142763165
K.1'5/16A: RNCC: 3 | RNVC: 2
C1 5-16: RNCC: 3 | RNVC: 2
C1'5/16: RNCC: 3 | RNVC: 2
K1 5-16: RNCC: 3 | RNVC: 9
3148510297453: RNCC: 5 | RNVC: 2
3272670258877: RNCC: 5 | RNVC: 2
0029745: RNCC: 5 | RNVC: 9
K1 5-16: RNCC: 5 | RNVC: 9
DEMK1 5-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-031-2516
Fourche De Levage

140312516
1-7ADETQ: RNCC: 3 | RNVC: 9

14 Jun 1980

5120-14-574-0850
Seal Inserter

145740850
0314355: RNCC: 3 | RNVC: 2

5 Dec 2012

5120-14-262-5571
Broche Pour Montage

142625571
M0NT17117: RNCC: 3 | RNVC: 2
M0N17117: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-376-2273

5120-14-243-7366

5120-14-223-2662
Cle De Positionneme

142232662
M12-046: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-241-1639
Matrice Montee Conn

142411639
8459-125: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-237-4690
Manille Speciale

142374690
3130S95-00-047: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-349-6469
Patin De Verin

143496469
41-14586: RNCC: 3 | RNVC: 2
41-14586: RNCC: 5 | RNVC: 9

22 May 1978

5120-14-224-9915
Open End Wrench

142249915
71-55: RNCC: 3 | RNVC: 2
10A55: RNCC: 5 | RNVC: 2
M6-072: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-384-1954
Mechanical Puller Attachment

143841954
NO PRIMARY REF14-384-1954: RNCC: 3 | RNVC: 2
20669: RNCC: 5 | RNVC: 9

4 May 1983

5120-14-311-7467
Hand Tube Flaring Punch

143117467
6800-1063: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-387-1940
Mise En Place Outil

143871940
MHN235-42: RNCC: 3 | RNVC: 2
MHN235-42: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-370-8542
Desopercul Aiguille

143708542
1897569521: RNCC: 3 | RNVC: 2
85-691-6909: RNCC: 6 | RNVC: 9
85-801-1842: RNCC: 6 | RNVC: 9

5 Jun 1981

5120-14-273-7096

5120-14-253-9253
Extracteur De Volan

142539253
60902: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-478-5905
Spanner Wrench

144785905
76-88774-33: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-264-7975
Open End Wrench

142647975
262-12-94303-01: RNCC: 3 | RNVC: 2
NA53-002: RNCC: 5 | RNVC: 2

1 Jan 1970

Load More Results