What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 94 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 94 of 110

5120-14-556-0504
Open End Box Wrench

145560504
70A.24: RNCC: 3 | RNVC: 2
3148511166833: RNCC: 5 | RNVC: 2

24 Jan 2008

5120-14-572-3601
Flat Tip And Cross Tip Screwdriver Set

145723601
AN.J10: RNCC: 3 | RNVC: 2
3148517867956: RNCC: 5 | RNVC: 2
786795: RNCC: 5 | RNVC: 2

27 Jun 2012

5120-14-231-8829
Extracteur Special

142318829
PR47304: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-207-2716

5120-14-333-7366

5120-14-317-0271
Spanner Wrench

143170271
G1-15-044: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-352-3146
Drift

143523146
MGA356-22: RNCC: 3 | RNVC: 2
MGA356-22: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-239-4182
Adjustable Wrench

142394182
A10-95-914-03-0: RNCC: 3 | RNVC: 2
A10-95-914-03-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-315-1250
Spanner Wrench

143151250
MD003-10-00REP2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-209-4621
Cle De Blocage Pour

142094621
NO PRIMARY REF14-209-4621: RNCC: 3 | RNVC: 2
21621: RNCC: 5 | RNVC: 9
21621: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-530-7698
Socket Wrench Adapter

145307698
888-387-601-0: RNCC: 3 | RNVC: 2

3 Jul 2002

5120-14-281-2969
Douille A Creneaux

142812969
C46857: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-508-6076
Cross Tip Screwdriver

145086076
ACZD4X200: RNCC: 3 | RNVC: 2
003921: RNCC: 5 | RNVC: 2
ACD.4X200: RNCC: 5 | RNVC: 2
0613 356 4: RNCC: 5 | RNVC: 2

22 Sep 1998

5120-14-387-5010
Outilla Regl Conver

143875010
915-3-96-230: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-465-4617
Bague Emmanche

144654617
851-500-038-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-253-6238
Extracteur Daxe Dar

142536238
0223-78: RNCC: 3 | RNVC: 2
RA223: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-213-5209
Pousse Roulement Po

142135209
75209: RNCC: 3 | RNVC: 2
75209: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-543-6974
Socket Wrench Socket

145436974
T632A5001302: RNCC: 3 | RNVC: 2

3 Dec 2004

5120-14-467-6761
Spanner Wrench

144676761
1391831: RNCC: 3 | RNVC: 2
C26E/CL: RNCC: 5 | RNVC: 2

21 Jan 1994

5120-14-040-5898
Matrice

140405898
48758-1: RNCC: 3 | RNVC: 2
48758: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-379-6030
Hand Hydraulic Jack Kit

143796030
26545914100: RNCC: 3 | RNVC: 2
212782-02: RNCC: 5 | RNVC: 2
21278202: RNCC: 5 | RNVC: 2
26.545.9141.00: RNCC: 5 | RNVC: 2
26545914100: RNCC: 5 | RNVC: 2
265459141: RNCC: 5 | RNVC: 9

1 Oct 1982

5120-14-283-3889
Cle Pour Ecrou Cage

142833889
9970-111-129: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-514-0139
Open End Wrench

145140139
ENFD29159-22X24: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-421-0769
Spanner Wrench

144210769
6512-58426: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-352-3161
Montage Joint Obus

143523161
MGF288-42: RNCC: 3 | RNVC: 2
MGE288-21: RNCC: 5 | RNVC: 2
MGF288-42: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-280-8818
Embout De Connexion

142808818
356-2M41P68: RNCC: 3 | RNVC: 9
PA356-2M41P68: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-328-1088
Spanner Wrench

143281088
VTR400-1130WE: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-511-5479
Socket Wrench Ratchet Attachment

145115479
J.158: RNCC: 3 | RNVC: 2
28663: RNCC: 5 | RNVC: 2
3148510286631: RNCC: 5 | RNVC: 2

24 Dec 1998

5120-14-249-6767
Cle A Ergots Specia

142496767
2-02532: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-503-4653
Electronic Component Inserter And Remover

145034653
29339642: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-429-9906
Screwdriver Bit

144299906
AMX.0: RNCC: 3 | RNVC: 2
AMX-0: RNCC: 5 | RNVC: 2
91628329: RNCC: 5 | RNVC: 2
3148510086200: RNCC: 5 | RNVC: 2
0008620: RNCC: 5 | RNVC: 9

22 Feb 1989

5120-14-249-9696
Flat Tip Screwdriver

142499696
101-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-293-9343
Demonte Glace Fixe

142939343
44939: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-255-1965

5120-14-220-8547
Extracteur Special

142208547
PR46528: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-245-3541

5120-14-276-4317
Tournevis Special

142764317
80900-420: RNCC: 3 | RNVC: 2
79488: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-438-5010
Face Spanner Wrench Socket

144385010
37AM022: RNCC: 3 | RNVC: 2
85-694-0447: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-384-1989
Faux Mors

143841989
26-281-11: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-513-7372
Flat Tip Screwdriver

145137372
ENFD6561-1-2X6-5X150: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-267-0442
Cle Regage

142670442
NO PRIMARY REF14-267-0442: RNCC: 3 | RNVC: 2
445764: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-428-2568
Open End Wrench

144282568
NO PRIMARY REF14-428-2568: RNCC: 3 | RNVC: 2
44.13/16X7/8: RNCC: 5 | RNVC: 2
0104610: RNCC: 5 | RNVC: 2
44 13-16X7-8: RNCC: 5 | RNVC: 2
44 13-16X7-8CP: RNCC: 5 | RNVC: 2
44 13-16X7-CP: RNCC: 5 | RNVC: 2
39CP13-16X7-8: RNCC: 5 | RNVC: 2
91571784: RNCC: 5 | RNVC: 2
13 13-16X7-8: RNCC: 5 | RNVC: 2
11 13-16X7-8: RNCC: 5 | RNVC: 2

8 Dec 1988

5120-14-513-7385
Flat Tip Screwdriver

145137385
ENFD6560-1-2X6-5X100: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-271-6098
Open End Wrench

142716098
E74-301-41: RNCC: 2 | RNVC: 2
69-41: RNCC: 3 | RNVC: 2
E74301C41WWF: RNCC: 5 | RNVC: 1
3272670280731: RNCC: 5 | RNVC: 2
SYQ0076: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-424-1831
Open End Wrench

144241831
68-21: RNCC: 3 | RNVC: 2
3272670357112: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-410-0517
Etalonnage Calibre

144100517
AXB501-164-800/02: RNCC: 3 | RNVC: 2
AXB501-164-800-02: RNCC: 5 | RNVC: 2

4 Jun 1986

5120-14-214-0197
Boite Metallique

142140197
NO PRIMARY REF14-214-0197: RNCC: 3 | RNVC: 2
W12-11BUB0ITE: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-354-5788
Broch Conne Extract

143545788
AEET4M9701-1000: RNCC: 3 | RNVC: 2
85-689-6195: RNCC: 6 | RNVC: 9

31 Jan 1979

5120-14-262-3130
Outil Maintien Pris

142623130
NO PRIMARY REF14-262-3130: RNCC: 3 | RNVC: 2
175161: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-392-0540
Controle Outillage

143920540
MJG448-22: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-247-9649
Poignee Cle A Douil

142479649
RT20649: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-566-0856
Screwdriver Bit Set

145660856
E.114PB: RNCC: 3 | RNVC: 2
813765: RNCC: 5 | RNVC: 2

19 Oct 2010

5120-14-401-2494
Cle A Fourch Embout

144012494
D022: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-304-9840

5120-14-575-9412
Inserter And Remove

145759412
8813824002: RNCC: 3 | RNVC: 2

16 May 2013

5120-14-309-6598

5120-14-415-9293
Cle De Reglage

144159293
853-390-077-0: RNCC: 3 | RNVC: 2
853-390-002-0: RNCC: 5 | RNVC: 2

26 May 1987

5120-14-334-8061
Socket Wrench Socket

143348061
NO PRIMARY REF14-334-8061: RNCC: 3 | RNVC: 2
0051620: RNCC: 5 | RNVC: 2
R.3/8L: RNCC: 5 | RNVC: 2
R3-8L: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-479-0370
Torque Wrench Adapter

144790370
888-392-400-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-289-1464
Pince Porte Vis A R

142891464
PINCELAMEBAI0NNETTE3-5A6-5-1-195: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-301-4717
Spanner Wrench

143014717
915-1-95-06: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-566-2651
Seal Inserter

145662651
T632G3022201: RNCC: 3 | RNVC: 2

2 Nov 2010

5120-14-482-1204
Socket Head Screw Key

144821204
82H.3/16: RNCC: 3 | RNVC: 2
3148511235614: RNCC: 5 | RNVC: 2
0110701K00: RNCC: 5 | RNVC: 2
0715 311 32: RNCC: 5 | RNVC: 2
SYQ5191: RNCC: 5 | RNVC: 2
0123561: RNCC: 5 | RNVC: 9
82H3-16: RNCC: 5 | RNVC: 9

20 Jun 1996

5120-14-427-6481
Socket Head Screw Key

144276481
NO PRIMARY REF14-427-6481: RNCC: 3 | RNVC: 2
E0949601: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-501-5644
Cross Tip Screwdriver

145015644
APY.2X125VE: RNCC: 3 | RNVC: 2
3148510095523: RNCC: 5 | RNVC: 2
3148510095578: RNCC: 5 | RNVC: 2
220-0757: RNCC: 5 | RNVC: 2
0613 181 2: RNCC: 5 | RNVC: 2
0009552: RNCC: 5 | RNVC: 9
APY.2X125VSE: RNCC: 5 | RNVC: 9
FACOMAPY.2X125VSE: RNCC: 5 | RNVC: 9
MO099393: RNCC: 6 | RNVC: 9

5 Nov 1997

5120-14-316-6623
Open End Wrench

143166623
AK550: RNCC: 3 | RNVC: 2
AK550: RNCC: 5 | RNVC: 1
85-101-2438: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-270-8378
Wrench Extension Handle

142708378
D1553-8099: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-316-5627
Face Spanner Wrench Socket

143165627
3210-97-31-080: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-275-9811
Gatte Pr Nettoyage

142759811
NO PRIMARY REF14-275-9811: RNCC: 3 | RNVC: 2
3275-15REP2-3: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-352-0839
Outil Definit Bride

143520839
341A93-3129-21: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-451-4131
Cross Tip Screwdriver

144514131
NO PRIMARY REF14-451-4131: RNCC: 3 | RNVC: 2
PH0-4X75: RNCC: 5 | RNVC: 9
641750: RNCC: 5 | RNVC: 9

19 Nov 1991

5120-14-307-4724
Screwdriver Bit

143074724
506-12: RNCC: 3 | RNVC: 9
MUL506-12: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-437-3582
Spanner Wrench

144373582
J00650-01S140P022: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-295-6161
Open End Wrench

142956161
19-19: RNCC: 3 | RNVC: 2
M2-072: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-566-6779
Drill Guide

145666779
291899-11: RNCC: 3 | RNVC: 2

6 Dec 2010

5120-14-511-5475
Wire Twister Pliers

145115475
445.10R: RNCC: 3 | RNVC: 2
130483: RNCC: 5 | RNVC: 2
176455: RNCC: 5 | RNVC: 2
3148511764558: RNCC: 5 | RNVC: 2
445-10R: RNCC: 5 | RNVC: 2

24 Dec 1998

5120-14-214-2835
Cle Dynamometrique

142142835
M310: RNCC: 3 | RNVC: 2
9970-111-071-90: RNCC: 5 | RNVC: 2
9970-111-071: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-427-1135
Speciale Cle

144271135
537539: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-566-2389
Cross Tip Screwdriver

145662389
AWDH2X125: RNCC: 3 | RNVC: 2
3148517743724: RNCC: 5 | RNVC: 2

29 Oct 2010

5120-14-491-0203
Jauge

144910203
4602 009 600 023: RNCC: 3 | RNVC: 2
F300 0T 001 0997: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-347-0216
Valve Gonflage Cle

143470216
D46590: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-490-8765
Cle

144908765
4065 030 001 344: RNCC: 3 | RNVC: 2
F300 0T 000 5023: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-200-5764

5120-14-238-1222

5120-14-239-2176

5120-14-429-1464
D'emmanchem Mandrin

144291464
540096: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-422-5941
De Pose Outil

144225941
548068: RNCC: 3 | RNVC: 2

10 Mar 1988

5120-14-572-8448
Socket Wrench Socket

145728448
320016: RNCC: 3 | RNVC: 2
7612206014779: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-416-7468
Maintien Outil

144167468
536881: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-416-7460
Ecarteur Outil

144167460
536817: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-567-2005
Combination Box And Open End Wrench

145672005
440.36: RNCC: 3 | RNVC: 2
3148517682214: RNCC: 5 | RNVC: 2
768221: RNCC: 5 | RNVC: 2

21 Feb 2011

5120-14-427-2181
Equipee Pince

144272181
46MS014-01: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-265-6914
Partie M Coupe Fils

142656914
154727: RNCC: 3 | RNVC: 2
154-727: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-343-9759
Screwdriver Bit

143439759
1742: RNCC: 3 | RNVC: 2
85-100-7641: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-400-2695
Spanner Wrench

144002695
428-65042-000: RNCC: 3 | RNVC: 2
01-428-10277-000: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-393-0270
Open End Wrench

143930270
31.21X23: RNCC: 3 | RNVC: 2
3148510971087: RNCC: 5 | RNVC: 2
1105425F00: RNCC: 5 | RNVC: 2
91564505: RNCC: 5 | RNVC: 2
31-21X23: RNCC: 5 | RNVC: 2
0097108: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-427-0932
Formage Tas

144270932
540324: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-285-5701

5120-14-430-3476
Touche Filetee

144303476
RT35598: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-416-7456
Controle Outil

144167456
530755: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-234-3340
Extracteur

142343340
202496: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-321-7869

5120-14-431-2733
Pince Depose Bague

144312733
M12620: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-406-5690
Demontage Outil

144065690
853-201-256-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-518-0250
Six Point Tip Screwdriver

145180250
ENFD6576-45X140: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-345-9753
Screwdriver Bit

143459753
BTW6: RNCC: 3 | RNVC: 2
BTW6: RNCC: 5 | RNVC: 2
85-689-3423: RNCC: 6 | RNVC: 9

5 Nov 1977

5120-14-437-1709
Spanner Wrench

144371709
31405791: RNCC: 3 | RNVC: 9
85-694-1315: RNCC: 6 | RNVC: 9

17 Jan 1990

5120-14-570-2436
Spanner Wrench

145702436
UFA31537: RNCC: 3 | RNVC: 2

1 Dec 2011

5120-14-276-3095
Socket Wrench Socket

142763095
M.2': RNCC: 3 | RNVC: 2
M-2': RNCC: 3 | RNVC: 2
M2: RNCC: 3 | RNVC: 2
3148510320809: RNCC: 5 | RNVC: 2
M2: RNCC: 5 | RNVC: 2
3272670222816: RNCC: 5 | RNVC: 2
0032080: RNCC: 5 | RNVC: 9
M2P0UCES: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-493-0058
Tournev

144930058
4065 200 000 581: RNCC: 3 | RNVC: 2
F300 0T 009 4405: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-576-6137
Mechanical Puller S

145766137
8810572101: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-280-1417

5120-14-401-6931
Combination Box And Open End Wrench Set

144016931
41.JE24: RNCC: 3 | RNVC: 2
41.JE 24: RNCC: 5 | RNVC: 2
41JE24: RNCC: 5 | RNVC: 2
3148515289880: RNCC: 5 | RNVC: 2
0528988: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-570-2527
Face Spanner Wrench Socket

145702527
UFA31555: RNCC: 3 | RNVC: 2

2 Dec 2011

5120-14-556-4144
Box Wrench

145564144
D3948: RNCC: 3 | RNVC: 2

5 Mar 2008

5120-14-578-1245
Seal Inserter And Remover

145781245
8818691000: RNCC: 3 | RNVC: 2

4 Nov 2013

5120-14-284-6519

5120-14-483-1200
Screwdriver And Socket Wrench Combination

144831200
NO PRIMARY REF14-483-1200: RNCC: 3 | RNVC: 2
3148511266502: RNCC: 5 | RNVC: 2
88.5/16: RNCC: 5 | RNVC: 2
126650: RNCC: 5 | RNVC: 2

9 Aug 1996

5120-14-313-8781
Spanner Wrench

143138781
M2-068: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-480-1847
Bearing Staking Installation Tool

144801847
SJ151-9076-2: RNCC: 3 | RNVC: 2
EA2-0316: RNCC: 5 | RNVC: 2

26 Feb 1996

5120-14-461-2252
Outillage Relevage

144612252
PL1DA002OR901010A: RNCC: 3 | RNVC: 2

3 Mar 1993

5120-14-395-0764
Montage Cone

143950764
H46671: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-478-4529
Outil Applicateur

144784529
P152: RNCC: 3 | RNVC: 2

6 Nov 1995

5120-14-485-5888
Cle De Blocage

144855888
PL1NA003AA012632: RNCC: 3 | RNVC: 2

30 Jan 1997

5120-14-200-9493
Piston Ring Compressor

142009493
NO PRIMARY REF14-200-9493: RNCC: 3 | RNVC: 2
121130: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-514-0113
Open End Wrench

145140113
ENFD29159-16X18: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-411-2100
Spanner Wrench

144112100
110-721-01W26H: RNCC: 3 | RNVC: 2
7M329: RNCC: 5 | RNVC: 2
110-721-01-W26H: RNCC: 5 | RNVC: 2
85-691-9414: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-551-6174
Socket Wrench Socket

145516174
S.12XX: RNCC: 3 | RNVC: 2

10 Oct 2006

5120-14-344-3070
Torque Wrench Adapter

143443070
J.152: RNCC: 3 | RNVC: 2
3148510286402: RNCC: 5 | RNVC: 2
J152: RNCC: 5 | RNVC: 2
91367190: RNCC: 5 | RNVC: 2
0028640: RNCC: 5 | RNVC: 9

10 Aug 1977

5120-14-236-5179
Cross Tip Screwdriver

142365179
RT21334: RNCC: 3 | RNVC: 2
AX.2: RNCC: 3 | RNVC: 2
AMP2: RNCC: 3 | RNVC: 2
AX2: RNCC: 5 | RNVC: 2
3148510125404: RNCC: 5 | RNVC: 2
91346802: RNCC: 5 | RNVC: 2
0012540: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-552-7149
Socket Head Screw Key

145527149
83H.3,5: RNCC: 3 | RNVC: 2
83H.3,5: RNCC: 5 | RNVC: 2
3148511240366: RNCC: 5 | RNVC: 2

25 Jan 2007

5120-14-228-5178
Open End Wrench

142285178
NO PRIMARY REF14-228-5178: RNCC: 3 | RNVC: 2
285-30A: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-210-7129
Blasting Cap Crimper

142107129
NO PRIMARY REF14-210-7129: RNCC: 3 | RNVC: 2
DES2-202: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-343-9738
Socket Head Screw Key

143439738
HERCULE10: RNCC: 3 | RNVC: 2
85-598-8161: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-384-7359
Electrical Card Extractor

143847359
NO PRIMARY REF14-384-7359: RNCC: 3 | RNVC: 2
16931886: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-418-1884
Spanner Wrench

144181884
332A93-3115-00: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-311-7460
Open End Wrench

143117460
6800-1056: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-542-5422
Hand Armament Subsystem Carrier

145425422
728435S000-00A: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-272-3302
Open End Wrench

142723302
E74302C17-19WWF: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-395-9134
Spanner Wrench

143959134
2-37609: RNCC: 3 | RNVC: 2

23 Nov 1984

5120-14-418-2889
Open End Wrench

144182889
500-24: RNCC: 3 | RNVC: 9
DEM500-24: RNCC: 5 | RNVC: 9

6 Aug 1987

5120-14-490-7001
Wrench

144907001
241 W 03628 125: RNCC: 3 | RNVC: 2
F300 0T 000 1189: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6828
Moule

144906828
217 M 03026 040: RNCC: 3 | RNVC: 2
F300 0T 000 0927: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-563-6398
Mechanical Puller

145636398
260696300: RNCC: 3 | RNVC: 2

2 Mar 2010

5120-14-242-8706

5120-14-488-9503
Ens De Demontage

144889503
24248: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-253-3850
Outillage Pour Serr

142533850
044BBC14CPL1PC1AU22: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-233-7704

5120-14-503-2986
Outillage

145032986
622393030: RNCC: 3 | RNVC: 2

9 Jan 1998

5120-14-253-2035

5120-14-326-0852

5120-14-241-6033
Bloc De Presertissa

142416033
RMPS10M: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-569-5988
Torque Wrench

145695988
S.306-350D: RNCC: 3 | RNVC: 2

3 Oct 2011

5120-14-245-2071
Embout Pour Outil D

142452071
0187-028-000: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-222-7165
Open End Wrench

142227165
16 9-16X11-16IN: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-433-3188
Bearing And Bushing Remover

144333188
853-202-749-0: RNCC: 3 | RNVC: 2

19 Jul 1989

5120-14-394-3538
Flat Tip Screwdriver

143943538
NO PRIMARY REF14-394-3538: RNCC: 3 | RNVC: 2
0450-081: RNCC: 5 | RNVC: 2
0450-081: RNCC: 5 | RNVC: 9

28 Aug 1984

5120-14-301-7936
Spanner Wrench

143017936
NO PRIMARY REF14-301-7936: RNCC: 3 | RNVC: 2
B4C361502: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-349-8940
Reglage Tournevis

143498940
60692: RNCC: 3 | RNVC: 2
8332-19A: RNCC: 5 | RNVC: 2

14 Jun 1978

5120-14-353-2450
Open End Wrench

143532450
NO PRIMARY REF14-353-2450: RNCC: 3 | RNVC: 2
19416252: RNCC: 5 | RNVC: 9

8 Dec 1978

5120-14-426-5803
Socket Head Screw Key

144265803
NO PRIMARY REF14-426-5803: RNCC: 3 | RNVC: 2
E0951631: RNCC: 5 | RNVC: 9

8 Sep 1988

5120-14-448-9604
Combination Box And Open End Wrench

144489604
40.22L: RNCC: 3 | RNVC: 2
3148511011430: RNCC: 5 | RNVC: 2
40-22L: RNCC: 5 | RNVC: 2
0101143: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-440-2980
Screwdriver Bit

144402980
NO PRIMARY REF14-440-2980: RNCC: 3 | RNVC: 2
AMCT4: RNCC: 5 | RNVC: 2
AMC.T4: RNCC: 5 | RNVC: 2
0007122: RNCC: 5 | RNVC: 2
91623478: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-368-1459
Screw Thread Insert Inserter

143681459
01500205000: RNCC: 3 | RNVC: 2
1735A05080: RNCC: 5 | RNVC: 2
0114512Y00: RNCC: 5 | RNVC: 2
0150-01M5: RNCC: 5 | RNVC: 2
01500105000: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-371-4139
Spanner Wrench

143714139
6254-57786: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-448-9605
Combination Box And Open End Wrench

144489605
40.21L: RNCC: 3 | RNVC: 2
3148511011423: RNCC: 5 | RNVC: 2
40-21L: RNCC: 5 | RNVC: 2
0101142: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-234-8861

5120-14-041-8332
Spanner Wrench

140418332
80795-37-61: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-318-8085
Etau Tube Reducteur

143188085
IRR75SRM54-1-1A2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-571-6910
Spatula

145716910
RD-MJ-0030: RNCC: 3 | RNVC: 2

24 Apr 2012

5120-14-274-1062
Wrench Extension Handle

142741062
8810267006: RNCC: 3 | RNVC: 2
8000242706: RNCC: 5 | RNVC: 2
800-02-427-06: RNCC: 5 | RNVC: 2
881-0-267-006: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-491-0157
Cle

144910157
4602 007 200 140: RNCC: 3 | RNVC: 2
F300 0T 001 0944: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-353-9777
Screwdriver Bit

143539777
1019-6B: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-266-6997

5120-14-276-9175

5120-14-538-3670
Spanner Wrench

145383670
NGM0010036234052: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-371-3421
Open End Wrench

143713421
10-12X13CP: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-534-3249
Spanner Wrench

145343249
NNM0038660510238: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-212-9224
Cle A Jupe Pour Ecr

142129224
9970-115-019-01: RNCC: 3 | RNVC: 2
9970-115-019: RNCC: 3 | RNVC: 2
171-191: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-332-1135

5120-14-566-9841
Torque Wrench

145669841
S.306-350R: RNCC: 3 | RNVC: 2
732586: RNCC: 5 | RNVC: 2
3148517325869: RNCC: 5 | RNVC: 2

24 Jan 2011

5120-14-572-8542
Telescoping Pole

145728542
CE-4-21-C: RNCC: 3 | RNVC: 2

16 Aug 2012

5120-14-371-3367
Noya Tournevis Regl

143713367
NO PRIMARY REF14-371-3367: RNCC: 3 | RNVC: 2
11450-4: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-424-8789
Bearing And Bushing Inserter And Remover

144248789
851-200-027-0: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-406-5644
Guidage Broche

144065644
853-200-523-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-324-1928
Engine Valve Seat Insert Replacing Tool

143241928
7-010372-5: RNCC: 3 | RNVC: 2
RAB2166: RNCC: 5 | RNVC: 2
0UT2734: RNCC: 5 | RNVC: 9
7-010372-5: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-465-6487
Bearing And Bushing Remover

144656487
851-500-198-0: RNCC: 3 | RNVC: 2

6 Oct 1993

5120-14-282-9194
Screwdriver And Socket Wrench Combination

142829194
M261: RNCC: 3 | RNVC: 9
41-1-0: RNCC: 3 | RNVC: 9
DEMM261: RNCC: 5 | RNVC: 9
85-600-9011: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-223-7071

5120-14-561-6860
Spring Inserter And Remover

145616860
588 118: RNCC: 3 | RNVC: 2

20 Aug 2009

5120-14-461-3328
Bague Montage

144613328
31075: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-14-410-0576
Hole Sheet Metal Holder

144100576
CB6-4-5: RNCC: 3 | RNVC: 2
851-910-069-0: RNCC: 5 | RNVC: 2
CB6-4-5: RNCC: 5 | RNVC: 9
MM6-4-5: RNCC: 5 | RNVC: 9

4 Jun 1986

5120-14-445-4363
Leveling-Support Jack

144454363
SOB1600-90: RNCC: 3 | RNVC: 2

14 Feb 1991

5120-14-373-0070
Open End Wrench

143730070
9970-115-710: RNCC: 3 | RNVC: 2
85-689-8773: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-369-7934
Torque Wrench Adapter

143697934
30AM013-121: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-385-3378
Socket Wrench Socket

143853378
365A93-3360-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-479-8101
Screwdriver Bit

144798101
EX.615: RNCC: 3 | RNVC: 2
1080350N00: RNCC: 5 | RNVC: 2
236-0966: RNCC: 5 | RNVC: 2
3148510258621: RNCC: 5 | RNVC: 2
0025862: RNCC: 5 | RNVC: 9
FACOMEX.615: RNCC: 5 | RNVC: 9

7 Feb 1996

5120-14-401-4127
Bearing And Bushing Inserter

144014127
332A93-3405-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-411-5673
Cross Tip Screwdriver

144115673
NO PRIMARY REF14-411-5673: RNCC: 3 | RNVC: 2
525257: RNCC: 5 | RNVC: 2
252-1: RNCC: 5 | RNVC: 9
3272670234277: RNCC: 5 | RNVC: 9

25 Aug 1986

5120-14-577-6200
Bearing Staking Installation Tool

145776200
853-203-306-0: RNCC: 3 | RNVC: 2

27 Sep 2013

5120-14-483-9848
Pince Speciale Segm

144839848
25145803163: RNCC: 3 | RNVC: 2
106846: RNCC: 5 | RNVC: 2

16 Oct 1996

5120-14-559-4103
Seal Inserter

145594103
REF820: RNCC: 3 | RNVC: 2

8 Jan 2009

5120-14-501-0115
Detent Handling Tool

145010115
M0UT100000: RNCC: 3 | RNVC: 2
M-0UT100000: RNCC: 3 | RNVC: 2
M-OUT100000: RNCC: 5 | RNVC: 2
F300 0T 025 0410: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-321-8511
Spanner Wrench

143218511
6508161: RNCC: 3 | RNVC: 2
6508161: RNCC: 5 | RNVC: 1
85-626-7152: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-559-8141
Torque Wrench

145598141
LTX10258/21: RNCC: 3 | RNVC: 2

19 Feb 2009

5120-14-393-7010
Spanner Wrench

143937010
HN24: RNCC: 3 | RNVC: 2
SKFHN24: RNCC: 5 | RNVC: 9

7 Jun 1984

5120-14-538-3906
Bearing And Bushing Inserter

145383906
NGM0010036245125: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-321-7503
Cle A Cliqu Douille

143217503
67-21X23: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-349-6839
Offset Screwdriver

143496839
APZ.A: RNCC: 3 | RNVC: 2
APZA: RNCC: 5 | RNVC: 2
FACOM APZ-A: RNCC: 5 | RNVC: 2
3148510096001: RNCC: 5 | RNVC: 2
91613123: RNCC: 5 | RNVC: 2
0009600: RNCC: 5 | RNVC: 9
958 244 001 001: RNCC: 6 | RNVC: 9

22 May 1978

5120-14-450-9944
Sonde Protecteur

144509944
TCG2010005-1: RNCC: 3 | RNVC: 2

23 Oct 1991

144910165
4602 007 200 216: RNCC: 3 | RNVC: 2
F300 0T 001 0953: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-200-7636

5120-14-574-4783
Mechanical Finger

145744783
TM2252P005: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-14-437-9889
Conducte Extracteur

144379889
P785: RNCC: 3 | RNVC: 2
P766: RNCC: 5 | RNVC: 2
P766: RNCC: 5 | RNVC: 2

5 Mar 1990

5120-14-344-3236
Terminal Crimping Tool Contact Positioner

143443236
45763: RNCC: 3 | RNVC: 2
620-849-225-0: RNCC: 5 | RNVC: 2

10 Aug 1977

5120-14-373-7817
Socket Head Screw Key

143737817
88.8: RNCC: 3 | RNVC: 2
67B-8: RNCC: 3 | RNVC: 2
67B8: RNCC: 3 | RNVC: 2
91634564: RNCC: 5 | RNVC: 2
3148511265703: RNCC: 5 | RNVC: 2
88-8: RNCC: 5 | RNVC: 2
3272670215764: RNCC: 5 | RNVC: 2
91595781: RNCC: 5 | RNVC: 2
O613 250 080: RNCC: 5 | RNVC: 2
0126570: RNCC: 5 | RNVC: 9

13 Nov 1981

5120-14-335-7258
Outil Reglag Mecani

143357258
915-3-96-30: RNCC: 3 | RNVC: 2

30 Jun 1976

5120-14-490-6977
Screwdr

144906977
241 S 01397 015: RNCC: 3 | RNVC: 2
F300 0T 000 1148: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-320-0752
Embout-Cle A Fourch

143200752
D39: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-259-9310

5120-14-041-9780
Spanner Wrench

140419780
NO PRIMARY REF14-041-9780: RNCC: 3 | RNVC: 2
229490: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-14-346-8757
Mechanical Puller Attachment

143468757
5702-1-241: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-558-5122
Socket Wrench Socket

145585122
888-455-400-1: RNCC: 3 | RNVC: 2

9 Oct 2008

5120-14-562-2522
Face Spanner Wrench Socket

145622522
CLU02-116: RNCC: 3 | RNVC: 2

9 Oct 2009

5120-14-219-2379
Cle A Ergots Specia

142192379
M12-050: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-514-1231
Six Point Tip Screwdriver

145141231
ENFD6566-1-6X10X200: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-342-8769
Quick Adjusting Screw Clamp

143428769
672-80: RNCC: 3 | RNVC: 2
4-80: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-395-0273
Equipe Croisillon

143950273
853-200-483-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-449-9240
Spanner Wrench

144499240
7062RUF1-1-DN100-ACIER304L: RNCC: 3 | RNVC: 9

16 Sep 1991

5120-14-443-9393
Socket Head Screw Key

144439393
GS23 7/32: RNCC: 3 | RNVC: 2
GS100-03: RNCC: 5 | RNVC: 2

13 Dec 1990

5120-14-349-3871
Socket Wrench Crowfoot Attachment

143493871
9970-115-556: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-427-7615
Spanner Wrench

144277615
NO PRIMARY REF14-427-7615: RNCC: 3 | RNVC: 2
E0949634: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-313-8794
Open End Wrench

143138794
M2-046: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-321-8509
Spanner Wrench

143218509
6521754: RNCC: 3 | RNVC: 2
6521754: RNCC: 5 | RNVC: 1
85-626-7172: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-488-9249
Spanner Wrench

144889249
4311MT007-012: RNCC: 3 | RNVC: 2

11 Jun 1997

5120-14-443-9901
Open End Wrench

144439901
GS125-16: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-419-7418
Socket Head Screw Key

144197418
E74331A4AU: RNCC: 2 | RNVC: 2
E74331-4AU: RNCC: 5 | RNVC: 2

5 Nov 1987

5120-14-362-7422
Spanner Wrench

143627422
MHJ366-23: RNCC: 3 | RNVC: 2
MHJ366-23: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-423-2203
Ens Vis Poussee

144232203
0747122: RNCC: 3 | RNVC: 2
SP.1733 D-12: RNCC: 5 | RNVC: 2
SP1733D-12: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-417-0259
Valve Spring Lifter

144170259
8-0105Y: RNCC: 3 | RNVC: 2
9409760360: RNCC: 5 | RNVC: 2
9760-36: RNCC: 5 | RNVC: 2

30 Jun 1987

5120-14-541-0229
Maconnerie Tamis

145410229
6166080010: RNCC: 3 | RNVC: 2
3303806166022: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-231-7216
Support Tas Sertiss

142317216
4158J: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-213-5640

5120-14-273-8177

5120-14-488-5532
Socket Wrench Socket

144885532
J.7LA: RNCC: 3 | RNVC: 2
J7LA: RNCC: 5 | RNVC: 2
00.46.40.81: RNCC: 5 | RNVC: 2
3148510279961: RNCC: 5 | RNVC: 2
0027996: RNCC: 5 | RNVC: 9

21 May 1997

5120-14-521-6344
Socket Wrench Handle

145216344
K.154A: RNCC: 3 | RNVC: 2
0715 141 01: RNCC: 5 | RNVC: 2
0030795: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-287-0395
Adaptat Cle A Virer

142870395
33338B: RNCC: 3 | RNVC: 2
33338: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-514-6977
Socket Wrench Socket

145146977
R.10E: RNCC: 3 | RNVC: 2
1076986M00: RNCC: 5 | RNVC: 2
MO100194: RNCC: 6 | RNVC: 9

9 Jun 1999

5120-14-552-5688
Socket Wrench Socket

145525688
R.7AVSE: RNCC: 3 | RNVC: 2
R.7AVSE: RNCC: 5 | RNVC: 2
3148510517278: RNCC: 5 | RNVC: 2

17 Jan 2007

5120-14-207-4934
Cle Pour Pignon Ent

142074934
6-000-317: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-569-2669
Spanner Wrench Set

145692669
90106: RNCC: 3 | RNVC: 2

30 Aug 2011

5120-14-572-4056
Spanner Wrench

145724056
O111518: RNCC: 3 | RNVC: 2

3 Jul 2012

5120-14-512-2009
Socket Head Screw Key

145122009
89TX.9: RNCC: 3 | RNVC: 2
0715 33 44: RNCC: 5 | RNVC: 2

8 Feb 1999

5120-14-508-6078
Flat Tip Screwdriver

145086078
ACZH.6,5X150: RNCC: 3 | RNVC: 2
0004150: RNCC: 5 | RNVC: 2
ACGH.6,5X150: RNCC: 5 | RNVC: 2
0613 240 55: RNCC: 5 | RNVC: 2

22 Sep 1998

5120-14-437-1583
Elingage Outillage

144371583
27386504-5: RNCC: 3 | RNVC: 2
SG-AX115: RNCC: 5 | RNVC: 2

17 Jan 1990

5120-14-308-4349
Cle Disque

143084349
3FA160S13-172BREP5: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-477-5032
Socket Wrench Adapter

144775032
J.373: RNCC: 3 | RNVC: 2
3148510291079: RNCC: 5 | RNVC: 2
J373: RNCC: 5 | RNVC: 2
1080732Q00: RNCC: 5 | RNVC: 2
0029107: RNCC: 5 | RNVC: 9
85-694-3945: RNCC: 6 | RNVC: 9

7 Sep 1995

5120-14-245-2073
Pince A Sertir Conn

142452073
15500-25-1: RNCC: 3 | RNVC: 2
15500-25-1: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-481-8839
Controle Outillage

144818839
Q33014311-4: RNCC: 3 | RNVC: 2

6 Jun 1996

5120-14-472-6259
Cle Prf

144726259
96173511: RNCC: 3 | RNVC: 2

8 Nov 1994

5120-14-516-8065
Centreur

145168065
5001008864: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-222-1509
Cross Tip Screwdriver

142221509
3130-5: RNCC: 3 | RNVC: 2
3130TFC5: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-419-7960
Electrical Contact Remover

144197960
91038-1: RNCC: 3 | RNVC: 2

5 Nov 1987

5120-14-552-7301
Socket Head Screw Key

145527301
84.3/8: RNCC: 3 | RNVC: 2
84.3/8: RNCC: 5 | RNVC: 2
3148511254004: RNCC: 5 | RNVC: 2

26 Jan 2007

5120-14-516-8052
Poussoir

145168052
5001008879: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-325-5151
Tournevis A Ergots

143255151
125-8: RNCC: 3 | RNVC: 9
111382: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-521-0556
Hand Screw Starter

145210556
AFU.0: RNCC: 3 | RNVC: 2
0239719T00: RNCC: 5 | RNVC: 2

5 Jul 2000

5120-14-212-9893

5120-14-245-1774

5120-14-489-1012
Socket Head Screw Key

144891012
82H.12: RNCC: 3 | RNVC: 2
SYQ5194: RNCC: 5 | RNVC: 2
3148511231210: RNCC: 5 | RNVC: 2
235-3003: RNCC: 5 | RNVC: 2
82H12: RNCC: 5 | RNVC: 2
0110688R00: RNCC: 5 | RNVC: 2
91777987: RNCC: 5 | RNVC: 2
0715 31 47: RNCC: 5 | RNVC: 2
0123121: RNCC: 5 | RNVC: 9
FACOM82H.12: RNCC: 5 | RNVC: 9

27 Jun 1997

5120-14-223-5346
Cle Pour Vis Accoup

142235346
044BBC4BBF4PL1/2BREP2: RNCC: 3 | RNVC: 2
044BBC4BBF4AREP2: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-257-1795
Hand Screw Jack Extension

142571795
0855543700: RNCC: 3 | RNVC: 2
0855543700: RNCC: 5 | RNVC: 9
105B10: RNCC: 5 | RNVC: 9
1600: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-540-7447
Open End Wrench

145407447
38051893: RNCC: 3 | RNVC: 2
ND069560: RNCC: 5 | RNVC: 2
4848ZG8613181488: RNCC: 6 | RNVC: 9

23 Apr 2004

5120-14-454-9329
Screwdriver Bit Extension

144549329
007040: RNCC: 3 | RNVC: 2
AMC-H1: RNCC: 3 | RNVC: 2

29 Apr 1992

5120-14-356-6003
Spanner Wrench

143566003
D47564: RNCC: 3 | RNVC: 2

15 May 1979

5120-14-505-9308
Bearing And Bushing Inserter And Remover

145059308
K117120B: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-456-5253
Spanner Wrench

144565253
600405274: RNCC: 3 | RNVC: 2
600405274: RNCC: 5 | RNVC: 9

8 Jul 1992

5120-14-530-8323
Hydraulic Jack Handle

145308323
99428769: RNCC: 3 | RNVC: 9

8 Jul 2002

5120-14-421-3383
Socket Wrench Spanner Attachment

144213383
536752: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-488-2838
Socket Wrench Screwdriver Attachment

144882838
EBNA.208: RNCC: 3 | RNVC: 2
EBNA.208: RNCC: 5 | RNVC: 2
EBNA208: RNCC: 5 | RNVC: 2
0022318: RNCC: 5 | RNVC: 9

25 Apr 1997

5120-14-536-8288
Flat Tip Screwdriver

145368288
ACZ.5,5X100: RNCC: 3 | RNVC: 2
0224223E00: RNCC: 5 | RNVC: 2

17 Sep 2003

5120-14-410-0626
Entrainement Cle

144100626
853-100-204-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-350-7730
Retaining Ring Pliers

143507730
OXB501-482-801-7: RNCC: 3 | RNVC: 2
0XB501-482-801-7: RNCC: 5 | RNVC: 2
85-635-2760: RNCC: 6 | RNVC: 9

12 Jul 1978

5120-14-506-9985
Screwdriver Bit

145069985
ENFD6515-C0-8X5-5X39X1-4: RNCC: 3 | RNVC: 2
F300 0P 000 1283: RNCC: 5 | RNVC: 2

3 Jun 1998

5120-14-479-1327
Bearing And Bushing Remover

144791327
853-203-227-0: RNCC: 3 | RNVC: 2

13 Dec 1995

5120-14-249-9701
Socket Wrench Screwdriver Attachment

142499701
ST.5/16: RNCC: 3 | RNVC: 2
3148515189203: RNCC: 5 | RNVC: 2
ST5-16: RNCC: 5 | RNVC: 2
0518920: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-212-9116
Levier A Fourche Ou

142129116
9970-111-069: RNCC: 3 | RNVC: 2
9970-111-069-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-550-9938
Spanner Wrench

145509938
6504FE201-5-001: RNCC: 3 | RNVC: 2

17 Aug 2006

5120-14-493-6129
Cle

144936129
702602: RNCC: 3 | RNVC: 2
F300 0T 013 9162: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-280-8777

5120-14-200-3982

5120-14-483-0705
Flat Tip Screwdriver

144830705
AR.6,5X150AVSE: RNCC: 3 | RNVC: 2
AR.6,5X150AVSE: RNCC: 5 | RNVC: 2
3148510110752: RNCC: 5 | RNVC: 2
ARS.6,5X150VSE: RNCC: 5 | RNVC: 2
0011075: RNCC: 5 | RNVC: 9
AR.6,5X150AVSE: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-269-5216
Torque Wrench Adapter

142695216
S.152: RNCC: 3 | RNVC: 2
101260: RNCC: 5 | RNVC: 2
C66541: RNCC: 5 | RNVC: 2
3148510568003: RNCC: 5 | RNVC: 2
S152: RNCC: 5 | RNVC: 2
0183486D00: RNCC: 5 | RNVC: 2
91348989: RNCC: 5 | RNVC: 2
91348989: RNCC: 5 | RNVC: 2
0056800: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-410-3675
Screwdriver Bit

144103675
EX.140: RNCC: 3 | RNVC: 2
EX40: RNCC: 3 | RNVC: 2
3148510258300: RNCC: 5 | RNVC: 2
EX140: RNCC: 5 | RNVC: 2
0614 314 0: RNCC: 5 | RNVC: 2
2695 740: RNCC: 5 | RNVC: 2
0025830: RNCC: 5 | RNVC: 9

18 Jun 1986

5120-14-273-7710
Flat Tip Screwdriver

142737710
ATH.6,5X125: RNCC: 3 | RNVC: 2
104-3: RNCC: 3 | RNVC: 2
TFT61: RNCC: 3 | RNVC: 2
0011540: RNCC: 5 | RNVC: 2
3148510115405: RNCC: 5 | RNVC: 2
105114: RNCC: 5 | RNVC: 2
ATH125: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-555-7537
Adjustable Wrench

145557537
350A93-3302-01: RNCC: 3 | RNVC: 2

11 Dec 2007

5120-14-382-1298
Extracteur Roulemen

143821298
NO PRIMARY REF14-382-1298: RNCC: 3 | RNVC: 2
21C8109: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-221-8807

5120-14-221-8793

5120-14-241-0273
Cle Des Balanciers

142410273
202475: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-219-5568

5120-14-463-7659
Manchon

144637659
428384Y: RNCC: 3 | RNVC: 2
M17404: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-532-1111
Assembly Support

145321111
N673301GC127: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-282-9323
Spanner Wrench

142829323
T0655: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-278-5538
Socket Head Screw Key

142785538
70726812: RNCC: 3 | RNVC: 2
BE131520: RNCC: 5 | RNVC: 9
70726812: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-431-9037
Detent Handling Tool

144319037
726506: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-432-9840
Equipe Ass Goujon

144329840
8RLB0198: RNCC: 3 | RNVC: 9
RAS8RLB0198: RNCC: 5 | RNVC: 9

5 Jul 1989

5120-14-541-3713
Socket Wrench Screwdriver Attachment Set

145413713
31560: RNCC: 3 | RNVC: 2

3 Jun 2004

5120-14-356-1902
Open End Wrench

143561902
187548: RNCC: 3 | RNVC: 2

25 Apr 1979

5120-14-513-7375
Flat Tip Screwdriver

145137375
ENFD6560-0-8X4X75: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-247-1917

5120-14-274-8675

5120-14-480-1846
Bearing Staking Installation Tool

144801846
SJ151-9076-1: RNCC: 3 | RNVC: 2
EA2-0315: RNCC: 5 | RNVC: 2

26 Feb 1996

5120-14-306-9711
Pliers

143069711
E77-004: RNCC: 2 | RNVC: 2
P 90-260 MM: RNCC: 3 | RNVC: 2
4283-2: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-348-7713
Flat Tip Screwdriver

143487713
NO PRIMARY REF14-348-7713: RNCC: 3 | RNVC: 2
250-1: RNCC: 5 | RNVC: 9
525251: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-14-479-0361
Socket Wrench Crowfoot Attachment

144790361
888-375-100-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-386-1526
Immobilisation Mra

143861526
365A96-3355-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-508-6927
Guide De Decoupage

145086927
MTFLXM9002300AA: RNCC: 3 | RNVC: 2
SAV139: RNCC: 5 | RNVC: 2

25 Sep 1998

5120-14-523-8259
Mattock-Pick Handle

145238259
231032: RNCC: 3 | RNVC: 2

5 Feb 2001

5120-14-366-6435
Terminal Crimping Tool Contact Positioner

143666435
11811: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-232-7887
Socket Wrench Screwdriver Attachment

142327887
RT.1/4: RNCC: 3 | RNVC: 2
3148515143809: RNCC: 5 | RNVC: 2
RT1-4: RNCC: 5 | RNVC: 2
0514380: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-442-2048
Face Spanner Wrench Socket

144422048
54250-1: RNCC: 3 | RNVC: 2
89280355: RNCC: 5 | RNVC: 2

3 Oct 1990

5120-14-472-1658
Ring Retaining Pliers Tip Set

144721658
2928-3: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-442-2178
Socket Wrench Socket

144422178
M.80: RNCC: 3 | RNVC: 2
39382960: RNCC: 3 | RNVC: 2
0031940: RNCC: 5 | RNVC: 2
3148510319407: RNCC: 5 | RNVC: 2
M80: RNCC: 5 | RNVC: 2
39382960: RNCC: 5 | RNVC: 9

3 Oct 1990

5120-14-528-8986
Socket Wrench Socket

145288986
J.24HLA: RNCC: 3 | RNVC: 2
027406: RNCC: 5 | RNVC: 2
3148510274065: RNCC: 5 | RNVC: 2
J.24HL: RNCC: 5 | RNVC: 2

20 Feb 2002

5120-14-525-9421
Drift

145259421
888-407-700-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-340-8899
Carte Log Extractr

143408899
696426-57: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-402-8791
Obturatr Exterieur

144028791
NO PRIMARY REF14-402-8791: RNCC: 3 | RNVC: 2
20C3344: RNCC: 5 | RNVC: 9

19 Jul 1985

5120-14-351-0877
Siege Daspirati Cle

143510877
M01444-28: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-362-1751
Faux Mors

143621751
C46317: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-292-8543

5120-14-302-6663
Cle Generateurs

143026663
0-78914-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-515-4481
Outillage Support

145154481
33022882-1: RNCC: 3 | RNVC: 2

13 Jul 1999

5120-14-220-8552
Mordache Speciale C

142208552
PR46578: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-226-0323

5120-14-282-9190
Socket Wrench Screwdriver Attachment

142829190
M2705: RNCC: 3 | RNVC: 9
DEMM2705: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-422-2446
Socket Wrench Spanner Attachment

144222446
0378-38200: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-280-1414

5120-14-532-3158
Cross Tip Screwdriver

145323158
273 M 1: RNCC: 3 | RNVC: 2
3059000788: RNCC: 5 | RNVC: 2

30 Oct 2002

5120-14-454-9414
Socket Head Screw Key

144549414
84E.5/64X75: RNCC: 3 | RNVC: 2
3148511254103: RNCC: 5 | RNVC: 2
0125410: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-352-1479
Socket Wrench Socket

143521479
K.2'1/4A: RNCC: 3 | RNVC: 2
3148510299822: RNCC: 5 | RNVC: 2
91638838: RNCC: 5 | RNVC: 2
TMY20-32-322: RNCC: 5 | RNVC: 2
91638838: RNCC: 5 | RNVC: 2
0029982: RNCC: 5 | RNVC: 9
K2 1-4: RNCC: 5 | RNVC: 9
IT2-1-4: RNCC: 5 | RNVC: 9
K2-1-4: RNCC: 5 | RNVC: 9

16 Oct 1978

5120-14-400-4661
Screwdriver Bit

144004661
AMM.1: RNCC: 3 | RNVC: 2
3148510076607: RNCC: 5 | RNVC: 2
AMM1: RNCC: 5 | RNVC: 2
0007660: RNCC: 5 | RNVC: 9

24 Apr 1985

5120-14-397-4861
Terminal Crimping Tool Contact Positioner

143974861
73040003: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-349-1262
Serrage Manuel Cle

143491262
ZB2MZ5: RNCC: 3 | RNVC: 2
3389110331448: RNCC: 5 | RNVC: 2

19 Apr 1978

5120-14-264-1592
Wrench Kit

142641592
8810424000: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-428-5534
Fixation Support

144285534
MKG3712212: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-413-5726
Appareil A Rectifie

144135726
3271RECTIFIEUSESURFACEVANNES: RNCC: 3 | RNVC: 2

17 Dec 1986

5120-14-231-9959
Fourche Darret De B

142319959
DAX: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-490-6863
Drill

144906863
240 D 01488 000: RNCC: 3 | RNVC: 2
F300 0T 000 0967: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-441-5070
Preformed Packing Inserter And Remover

144415070
16349553: RNCC: 3 | RNVC: 2

30 Aug 1990

5120-14-381-5047

5120-14-232-3786

5120-14-308-2201

5120-14-421-3360
Open End Wrench

144213360
536729: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-219-2167

5120-14-224-2539
Combination Box And Open End Wrench

142242539
50-5/8: RNCC: 3 | RNVC: 2
40.5/8: RNCC: 3 | RNVC: 2
0713 303 07: RNCC: 5 | RNVC: 2
3148511008201: RNCC: 5 | RNVC: 2
40 5-8: RNCC: 5 | RNVC: 2
40-5-8: RNCC: 5 | RNVC: 2
40.5/8: RNCC: 5 | RNVC: 2
3272670268012: RNCC: 5 | RNVC: 2
50 5-8: RNCC: 5 | RNVC: 9
0100820: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-434-6803
Socket Head Screw Key

144346803
0T2-2-18: RNCC: 3 | RNVC: 2
8006104610: RNCC: 5 | RNVC: 2
5120AA1075862: RNCC: 6 | RNVC: 9

27 Sep 1989

5120-14-459-3420
Socket Wrench Socket Set

144593420
S.400A: RNCC: 3 | RNVC: 2
S.400E: RNCC: 5 | RNVC: 2
S400E: RNCC: 5 | RNVC: 2
3148515152955: RNCC: 5 | RNVC: 2
0515295: RNCC: 5 | RNVC: 9

26 Nov 1992

5120-14-249-9695
Socket Wrench Screwdriver Attachment

142499695
JT.5: RNCC: 3 | RNVC: 2
0506240: RNCC: 5 | RNVC: 2
91634286: RNCC: 5 | RNVC: 2
CAE00930: RNCC: 5 | RNVC: 2
3148515062407: RNCC: 5 | RNVC: 2
JT5: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-543-5480
Plug Electrical Connector Extractor

145435480
9 550 16 008 0: RNCC: 3 | RNVC: 2

19 Nov 2004

5120-14-395-0766
Montage Cone

143950766
H46677: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-376-6313
Flat Tip Screwdriver

143766313
NO PRIMARY REF14-376-6313: RNCC: 3 | RNVC: 2
464-3-5: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-205-9820
Socket Wrench Spanner Attachment

142059820
253-5M945: RNCC: 3 | RNVC: 2
RU253-5M945: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-304-3155
Cone De Montage

143043155
S16-0609-0631: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-488-9041
Semelle + Tube

144889041
9192 1 TIV: RNCC: 3 | RNVC: 2

11 Jun 1997

5120-14-363-8793

5120-14-577-3281
Sealant Dispenser

145773281
Z30311: RNCC: 3 | RNVC: 2

6 Sep 2013

5120-14-330-3142

5120-14-242-4635

5120-14-249-0676
Leve-Soupape

142490676
1106: RNCC: 3 | RNVC: 2
720705: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-219-2221

5120-14-240-6142

5120-14-217-2680
Obus Pour Axe

142172680
SMS97: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-216-2150

5120-14-220-5172
Cle Speciale

142205172
3160S95-68-080: RNCC: 3 | RNVC: 2
3160-95-68-080: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-356-5969
Inst Nervu Outillag

143565969
TF10A55304: RNCC: 3 | RNVC: 2
85-688-6570: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-260-2336
Cle

142602336
M15-001: RNCC: 3 | RNVC: 2
M15-001: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-464-8488
Terminal Crimping Tool Contact Positioner

144648488
MS3191-16A: RNCC: 3 | RNVC: 2
91658464: RNCC: 5 | RNVC: 2

1 Sep 1993

5120-14-443-3383
Ressort A Cintrer

144433383
2510120: RNCC: 3 | RNVC: 2

16 Nov 1990

5120-14-375-1532
Ligne Arbre A Cames

143751532
24545901900: RNCC: 3 | RNVC: 2
245459019: RNCC: 5 | RNVC: 9

30 Jan 1982

5120-14-417-0233
Bearing And Bushing Inserter

144170233
8-0110S: RNCC: 3 | RNVC: 2

30 Jun 1987

5120-14-281-2994
Extracteur Clapet M

142812994
C46947: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-564-3857
Retaining Ring Pliers

145643857
197A.9: RNCC: 3 | RNVC: 2
0823285: RNCC: 5 | RNVC: 2

27 Apr 2010

5120-14-531-6478
Socket Wrench Socket

145316478
S.15F: RNCC: 3 | RNVC: 2
3148510538150: RNCC: 5 | RNVC: 2

9 Sep 2002

5120-14-406-6032
Handling Tool Arm

144066032
853-201-704-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-323-1741

5120-14-262-5559
Cle De Demontage

142625559
M0NT18756: RNCC: 3 | RNVC: 2
M0N18756: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-273-6945

5120-14-432-6271
Torque Wrench Adapter Set

144326271
S.300-22: RNCC: 3 | RNVC: 2
3148515148866: RNCC: 5 | RNVC: 2
0514886: RNCC: 5 | RNVC: 9

16 Jun 1989

5120-14-297-9658
Electrical Contact Inserter

142979658
001131 201 60: RNCC: 3 | RNVC: 2
1131-20: RNCC: 5 | RNVC: 2
1131-201-60: RNCC: 5 | RNVC: 2
91571278: RNCC: 5 | RNVC: 2
00113120160: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-281-2919
Extracteur Roulemen

142812919
A0113959: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-212-0062

5120-14-384-9835
Cle A Creneaux

143849835
7M275: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-514-1215
Flat Tip Screwdriver

145141215
ENFD6565-1-2X8: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-263-8835
Raidisseur

142638835
17-9-1466: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-215-9628
Cle Etoilee Hexagon

142159628
773-411-003F4-63X5SURPLATS: RNCC: 3 | RNVC: 2
773-411-003F4-63X5SURPLATS: RNCC: 5 | RNVC: 9
773-411-003FF4-63X5SURPLATS: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-449-6831
Spanner Wrench

144496831
OUT-18MS17: RNCC: 3 | RNVC: 2

2 Sep 1991

5120-14-521-6338
Socket Wrench Socket

145216338
NO PRIMARY REF14-521-6338: RNCC: 3 | RNVC: 2
JB.19: RNCC: 5 | RNVC: 2
0029133: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-385-3476
Bearing And Bushing Inserter

143853476
6806P32-5424-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-517-1774
Spanner Wrench

145171774
G040Z400-002A0002: RNCC: 3 | RNVC: 2

15 Nov 1999

5120-14-401-4133
Open End Wrench

144014133
332A93-5500-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-498-0873
Cle

144980873
10290001: RNCC: 3 | RNVC: 2
10-290001: RNCC: 3 | RNVC: 2
F300 0T 002 6823: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-489-3897
Screwdriver Bit

144893897
3246-875-100: RNCC: 3 | RNVC: 2
8006891G00: RNCC: 5 | RNVC: 2
3246-875-100: RNCC: 5 | RNVC: 9

16 Jul 1997

5120-14-343-1868
Masse Dextracteur

143431868
205232: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-344-3810

5120-14-543-6571
Socket Wrench Socket Set

145436571
K.421N: RNCC: 3 | RNVC: 2
3148515071508: RNCC: 5 | RNVC: 2

1 Dec 2004

5120-14-471-2116
Cross Tip Screwdriver

144712116
180/5: RNCC: 3 | RNVC: 2

4 Aug 1994

5120-14-490-6990
Wrench

144906990
241 W 00625 020: RNCC: 3 | RNVC: 2
F300 0T 000 1171: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-531-7620
Expandeur Soufflet

145317620
T.235B: RNCC: 3 | RNVC: 2
3148510646602: RNCC: 5 | RNVC: 2

17 Sep 2002

5120-14-228-7209

5120-14-274-5326

5120-14-216-4106

5120-14-201-8779
Open End Wrench

142018779
E74302S8X10AKB: RNCC: 2 | RNVC: 2
13L8X10: RNCC: 3 | RNVC: 2
1836: RNCC: 3 | RNVC: 2
44S8X10: RNCC: 3 | RNVC: 2
10-8X10: RNCC: 3 | RNVC: 2
3-8X10: RNCC: 5 | RNVC: 2
479928L: RNCC: 5 | RNVC: 2
10-8X10C: RNCC: 5 | RNVC: 2
10NC8X10: RNCC: 5 | RNVC: 2
A24: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-393-0269
Open End Wrench

143930269
22.5/16X3/8: RNCC: 3 | RNVC: 2
22 5-16X3-8: RNCC: 5 | RNVC: 2
22-5-16X3-8: RNCC: 5 | RNVC: 2
3148510949406: RNCC: 5 | RNVC: 2
0094940: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-426-6799
Ensemble Extracteur

144266799
4P07-130: RNCC: 3 | RNVC: 2

15 Sep 1988

5120-14-427-1493
Socket Head Screw Key

144271493
6252-54298: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-223-3265
Cle Speciale

142233265
NO PRIMARY REF14-223-3265: RNCC: 3 | RNVC: 2
S268004: RNCC: 5 | RNVC: 2
S268004: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-384-7340
Electrical Card Extractor

143847340
NO PRIMARY REF14-384-7340: RNCC: 3 | RNVC: 2
16931955: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-338-1761
Screwdriver Bit

143381761
0023952: RNCC: 3 | RNVC: 2
ENT.307/16: RNCC: 5 | RNVC: 2
ET7-16: RNCC: 5 | RNVC: 2
85-688-7870: RNCC: 6 | RNVC: 9

6 Nov 1976

5120-14-430-1013
Spanner Wrench

144301013
6814-58553: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-358-3635
Flat Tip Screwdriver

143583635
706-6X150: RNCC: 3 | RNVC: 9
DEM706-6X150: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-214-4679

5120-14-545-5606
Hand Chain Breaker-Riveter

145455606
CH-30310: RNCC: 3 | RNVC: 2

20 Apr 2005

5120-14-399-2082
Socket Head Screw Key

143992082
63-1-8: RNCC: 3 | RNVC: 2
0124460: RNCC: 3 | RNVC: 2
63-1/8: RNCC: 3 | RNVC: 2
83.1/8: RNCC: 5 | RNVC: 2
3272670250321: RNCC: 5 | RNVC: 2
83 1-8: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-490-6918
Die

144906918
241 D 00867 025: RNCC: 3 | RNVC: 2
F300 0T 000 1048: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-388-9025
Cle Montage Joint T

143889025
20180476: RNCC: 3 | RNVC: 2
20180476: RNCC: 5 | RNVC: 2

29 Nov 1983

5120-14-241-1517
Cle A Ergots Specia

142411517
0774-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-210-9892
Rallonge Pour Cle D

142109892
K.214A: RNCC: 3 | RNVC: 2
3148510310404: RNCC: 5 | RNVC: 2
K214: RNCC: 5 | RNVC: 9
0031040: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-532-3419
Hand Terminal Crimping Tool

145323419
59975-1: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-276-9189
Craftsman's Tweezers

142769189
151: RNCC: 3 | RNVC: 2
366-1: RNCC: 3 | RNVC: 2
3148511385005: RNCC: 5 | RNVC: 2
3272670220553: RNCC: 5 | RNVC: 2
SYQ0768: RNCC: 5 | RNVC: 2
91463565: RNCC: 5 | RNVC: 2
0138500: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-490-6903
Saw

144906903
240 S 01326 000: RNCC: 3 | RNVC: 2
F300 0T 000 1018: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-488-9950
C Outil De Montage

144889950
45731405: RNCC: 3 | RNVC: 2

18 Jun 1997

5120-14-436-0170
Protectr Monte Join

144360170
RT19841: RNCC: 3 | RNVC: 2
586446: RNCC: 5 | RNVC: 9

29 Nov 1989

5120-14-239-6383

5120-14-490-8730
Cle

144908730
4065 030 000 192: RNCC: 3 | RNVC: 2
F300 0T 000 4970: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-222-7144

5120-14-225-3970
Adaptateur Cle Dyna

142253970
R155: RNCC: 3 | RNVC: 2
254416: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-558-0429
Cross Tip Screwdriver

145580429
ANP2X35: RNCC: 3 | RNVC: 2
91883656: RNCC: 5 | RNVC: 2
123M7262: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-321-9501
Piece Dadaptation

143219501
411MA0719: RNCC: 3 | RNVC: 2
411MA719: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-313-3014

5120-14-298-2674

5120-14-407-6234
Montage Arbre Distr

144076234
24545924400: RNCC: 3 | RNVC: 2
245459244: RNCC: 5 | RNVC: 9

27 Feb 1986

5120-14-459-0934
Douille Anti-Deform

144590934
8818228010: RNCC: 3 | RNVC: 2

19 Nov 1992

5120-14-236-6002

5120-14-234-3307

5120-14-430-1069
Spanner Wrench

144301069
6232-54662: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-401-0502
Open End Wrench

144010502
8998-649: RNCC: 3 | RNVC: 2

29 May 1985

5120-14-316-9172
Mechanical Puller Adapter

143169172
U.51B5-14: RNCC: 3 | RNVC: 2
0762080: RNCC: 5 | RNVC: 2
EMB0UTU51-47: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-561-5527
Hand Beading Tool

145615527
037692: RNCC: 3 | RNVC: 2
376 92: RNCC: 5 | RNVC: 2
37692: RNCC: 5 | RNVC: 9
1.037692: RNCC: 5 | RNVC: 9

28 Jul 2009

5120-14-578-2579
Torque Wrench

145782579
K.306A600: RNCC: 3 | RNVC: 2
K.306A600PB: RNCC: 5 | RNVC: 1
0827147: RNCC: 5 | RNVC: 2
3148518271479: RNCC: 5 | RNVC: 2

15 Nov 2013

5120-14-287-8704
Combination Box And Open End Wrench

142878704
40.5/16: RNCC: 3 | RNVC: 2
3148511007204: RNCC: 5 | RNVC: 2
40 5-16: RNCC: 5 | RNVC: 2
40-5-16: RNCC: 5 | RNVC: 2
0713 303 02: RNCC: 5 | RNVC: 2
40.5/16: RNCC: 5 | RNVC: 2
0100720: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-542-9025
Preformed Packing Inserter And Remover

145429025
888-464-100-1: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-438-1111
Handling Tool Arm

144381111
16-080-027: RNCC: 3 | RNVC: 2

7 Mar 1990

5120-14-297-7684
Spanner Wrench

142977684
6800-2207: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-276-3242
Blacksmith's Top Swage

142763242
M0B17-10EC: RNCC: 3 | RNVC: 2
3831-10EMMANCHE: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-219-2175
Cle Col De Cygne Sp

142192175
PR46706: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-280-4143
Cle Speciale

142804143
367041: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-378-4733
Cimblot De Compress

143784733
8813671001: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-390-4853
Appareil De Retourn

143904853
DLP705400: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-329-4063
Ensemble Extracteur

143294063
728238: RNCC: 3 | RNVC: 2
SKF728238: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-366-0254
Regla Cylind Cadran

143660254
NO PRIMARY REF14-366-0254: RNCC: 3 | RNVC: 2
42-25-04-393: RNCC: 5 | RNVC: 9

4 Nov 1980

5120-14-326-0035
Flat Tip Screwdriver

143260035
FRP7S: RNCC: 3 | RNVC: 2
85-670-7660: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-325-3893
Rodoir Siege Clapet

143253893
PT761-13B: RNCC: 3 | RNVC: 2
PT761REP13: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-332-3835
Face Spanner Wrench Socket

143323835
M31-069: RNCC: 3 | RNVC: 2
M31-069: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-289-9724
Open End Wrench

142899724
VTR320-1120: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-441-4678
Pliers

144414678
GS10: RNCC: 3 | RNVC: 2
GS 165: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-14-437-9662
Hand Tube Flaring Tool Parts Kit

144379662
M12742: RNCC: 3 | RNVC: 2
M12742: RNCC: 3 | RNVC: 9

28 Feb 1990

5120-14-392-0822
Torque Wrench Adapter

143920822
853-100-065-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-552-8248
Socket Head Screw Key

145528248
82H.32: RNCC: 3 | RNVC: 2
3148511232460: RNCC: 5 | RNVC: 2
82H.32: RNCC: 5 | RNVC: 2

6 Feb 2007

5120-14-503-4665
Electronic Component Inserter And Remover

145034665
20303432: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-465-4221
Socket Head Screw Key Blade

144654221
0034060: RNCC: 3 | RNVC: 2
NEX.40: RNCC: 3 | RNVC: 2

29 Sep 1993

5120-14-478-8998
Screwdriver Bit Holder

144788998
1114304P00: RNCC: 3 | RNVC: 2

30 Nov 1995

5120-14-532-2533
Socket Wrench Socket

145322533
SJ.24: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-444-6968
Spanner Wrench

144446968
600086: RNCC: 3 | RNVC: 2

16 Jan 1991

5120-14-444-7630
Face Spanner Wrench Socket

144447630
0478-200014: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-436-0212
Preformed Packing Inserter

144360212
806375: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-392-5782
Spanner Wrench

143925782
CMT30E9013P22DN80REP9: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-437-9379
Torque Wrench Adapter

144379379
100955: RNCC: 3 | RNVC: 2
C63124: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-367-5490
Valve Spring Lifter

143675490
070195: RNCC: 3 | RNVC: 2
195R: RNCC: 5 | RNVC: 2
0000038200: RNCC: 5 | RNVC: 2
M0T382: RNCC: 5 | RNVC: 2
0000038200: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-314-8591
Solid Center Punch Set

143148591
256JS4: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-306-2359
Open End Wrench

143062359
44S10X12: RNCC: 3 | RNVC: 2
479949J: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-031-2116
Socket Head Screw Key

140312116
0001220: RNCC: 3 | RNVC: 2
A.202R2: RNCC: 5 | RNVC: 2
A202R2: RNCC: 5 | RNVC: 2

14 Jun 1980

5120-14-200-6599
Open End Wrench

142006599
33-4-6: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-269-4928

5120-14-209-8301

5120-14-247-9643
Maillet Matiere Pla

142479643
TERR0P601-3: RNCC: 3 | RNVC: 2
RT20390: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-488-9955
Socket Wrench Extension

144889955
R.228: RNCC: 3 | RNVC: 2
3148510527604: RNCC: 5 | RNVC: 2
91630357: RNCC: 5 | RNVC: 2
0052760: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-280-2187

5120-14-226-3749

5120-14-410-0133
Adaptation Reglage

144100133
8813001000: RNCC: 3 | RNVC: 2

4 Jun 1986

Load More Results