What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 93 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 93 of 110

5120-14-490-9458
Raccord

144909458
4280 020 000 069: RNCC: 3 | RNVC: 2
F300 0T 000 7132: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-454-7566
Regle Metallique Al

144547566
26-447: RNCC: 3 | RNVC: 2

11 Apr 1992

5120-14-245-8173
Cle Speciale

142458173
D8779A: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-567-1593
Retaining Ring Pliers

145671593
199A.32: RNCC: 3 | RNVC: 2
3148518231718: RNCC: 5 | RNVC: 2
823171: RNCC: 5 | RNVC: 2

16 Feb 2011

5120-14-345-9755
Socket Wrench Socket

143459755
NV28: RNCC: 3 | RNVC: 2
85-688-8714: RNCC: 6 | RNVC: 9

5 Nov 1977

5120-14-385-3532
Spanner Wrench

143853532
703A93-0023-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-212-9092
Emmanche-Joint Tori

142129092
9970-115-180: RNCC: 3 | RNVC: 2
9970-115-180-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-513-7394
Flat Tip Screwdriver

145137394
ENFD6561-0-4X2X40: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-329-6357
Support Detau

143296357
MFG098-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-357-7701
Optique Cle Coude

143577701
0404-00301: RNCC: 3 | RNVC: 2
0421-00401: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-386-1581
Out Monta Plateau

143861581
6801P31-1109-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-226-3121
Manchon Special

142263121
60290-01-400M10: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-521-9092
Pince Pour Connecte

145219092
870086-2: RNCC: 3 | RNVC: 2

25 Sep 2000

5120-14-560-3187
Socket Wrench Socket

145603187
S315V3001201: RNCC: 3 | RNVC: 2

8 Apr 2009

5120-14-410-0556
Outil A Rivet

144100556
851-601-133-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-373-0943
Centreur De Percage

143730943
854-500-316-0: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-391-0286
Torque Wrench Adapter

143910286
1404-121E20-200-00-0: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-406-5707
Montage Outil

144065707
853-200-736-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-241-6037
Bloc De Presertissa

142416037
RMPS16M: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-224-7876
Pince A Sertir Cont

142247876
117295: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-463-6865
Socket Head Screw Key Set

144636865
84.JL6: RNCC: 3 | RNVC: 2
3148515328800: RNCC: 5 | RNVC: 2
84-JL6: RNCC: 5 | RNVC: 2
84JL6: RNCC: 5 | RNVC: 2
0532880: RNCC: 5 | RNVC: 9

23 Jun 1993

5120-14-319-4064
Screwdriver Bit

143194064
0025025: RNCC: 3 | RNVC: 2
ET.105/32: RNCC: 5 | RNVC: 2
ET5-32: RNCC: 5 | RNVC: 2
NET5-32: RNCC: 5 | RNVC: 2
85-686-2143: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-446-8355
Socket Wrench Socket

144468355
K.15/16LA: RNCC: 3 | RNVC: 2
3148510304250: RNCC: 5 | RNVC: 2
K.1-5/16LA: RNCC: 5 | RNVC: 2
K15-16LA: RNCC: 5 | RNVC: 2
0030425: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-575-8095
Mechanical Puller S

145758095
TM5400P002-: RNCC: 3 | RNVC: 2

3 May 2013

5120-14-441-2008
Terminal Crimping Tool Contact Positioner

144412008
R073040007: RNCC: 3 | RNVC: 2
91711067: RNCC: 5 | RNVC: 2
73040007: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-379-0509
Electrical Card Extractor

143790509
412307A: RNCC: 3 | RNVC: 2
91523563: RNCC: 5 | RNVC: 2

6 Sep 1982

5120-14-483-1897
Face Spanner Wrench Socket

144831897
1122441W00: RNCC: 3 | RNVC: 2

22 Aug 1996

5120-14-214-3479
Open End Wrench

142143479
A2142701: RNCC: 3 | RNVC: 2
GC1341: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-463-6193
Socket Wrench Socket

144636193
0446653B00: RNCC: 3 | RNVC: 2

22 Jun 1993

5120-14-479-8081
Socket Head Screw Key

144798081
60899B6666584D00: RNCC: 3 | RNVC: 2

7 Feb 1996

5120-14-425-9265
Socket Wrench Spanner Attachment

144259265
600124: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-511-1061
Sheet Metalworking Stake

145111061
2490006: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-574-6819
Pliers

145746819
431.LMT: RNCC: 3 | RNVC: 2
FACOM 431.LMT: RNCC: 5 | RNVC: 2

13 Feb 2013

5120-14-478-7215
Flat Tip Screwdriver

144787215
NO PRIMARY REF14-478-7215: RNCC: 3 | RNVC: 2
1110515D00: RNCC: 5 | RNVC: 2
3148510110745: RNCC: 5 | RNVC: 2
ARS.6,5X100VSE: RNCC: 5 | RNVC: 2
0011074: RNCC: 5 | RNVC: 9

20 Nov 1995

5120-14-479-0348
Face Spanner Wrench Socket

144790348
888-366-900-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-238-5790
Open End Wrench

142385790
NO PRIMARY REF14-238-5790: RNCC: 3 | RNVC: 2
48-5: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-379-2229
Sertisseur Roulemen

143792229
15505: RNCC: 3 | RNVC: 2
SER15505: RNCC: 5 | RNVC: 2
85-691-9635: RNCC: 6 | RNVC: 9

6 Sep 1982

5120-14-402-9173
Centrage Support

144029173
74-514-006: RNCC: 3 | RNVC: 2

25 Jul 1985

5120-14-384-8839
Spanner Wrench

143848839
9970-115-711: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-519-4902
Plug Electrical Connector Extractor

145194902
MP6816-10: RNCC: 3 | RNVC: 2

22 Mar 2000

5120-14-425-8557
Spanner Wrench

144258557
10074: RNCC: 3 | RNVC: 2
OU10074: RNCC: 3 | RNVC: 2
85-693-3068: RNCC: 6 | RNVC: 9

26 Jul 1988

5120-14-463-1421
Bearing And Bushing Inserter And Remover

144631421
50349: RNCC: 3 | RNVC: 2
85-694-9656: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-302-6709
Socket Wrench Socket

143026709
1768-14: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-042-3678
Jeu Presses En C

140423678
952810: RNCC: 3 | RNVC: 2
952810: RNCC: 5 | RNVC: 9

13 Jul 1977

5120-14-339-0380
Open End Wrench

143390380
80900-290: RNCC: 3 | RNVC: 2
78576-181: RNCC: 5 | RNVC: 2
85-598-4701: RNCC: 6 | RNVC: 9

17 Dec 1976

5120-14-440-2979
Screwdriver Bit

144402979
NO PRIMARY REF14-440-2979: RNCC: 3 | RNVC: 2
0007120: RNCC: 5 | RNVC: 2
AMC.T3: RNCC: 5 | RNVC: 2
AMCT3: RNCC: 5 | RNVC: 2
91623477: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-385-3439
Mechanic's Bench Block

143853439
6803P31-0001-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-225-4033

5120-14-228-5105

5120-14-343-9939

5120-14-316-8377
Spanner Wrench

143168377
TD739P3: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-437-4304
Stud Inserter And Remover

144374304
16380918: RNCC: 3 | RNVC: 2
16380918: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-427-2017
Douille Corps

144272017
46AM003-01-1: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-353-7488
A Oeil Cle A Talon

143537488
9970-115-678: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-329-6403
Came Axe De Blocage

143296403
ML041-00-05: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-483-2210
Support

144832210
330A98-2031-00: RNCC: 3 | RNVC: 2

28 Aug 1996

5120-14-447-1341
Combination Box And Open End Wrench

144471341
851-912-011-0: RNCC: 3 | RNVC: 2

3 May 1991

5120-14-224-7872
Spanner Wrench

142247872
8400-447: RNCC: 3 | RNVC: 2
603-015: RNCC: 5 | RNVC: 2
91333217: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-394-9011
Adjustable Wrench

143949011
105.375: RNCC: 3 | RNVC: 2
3148511313602: RNCC: 5 | RNVC: 2
1134888Y00: RNCC: 5 | RNVC: 2
105-375: RNCC: 5 | RNVC: 2
0131360: RNCC: 5 | RNVC: 9

2 Oct 1984

5120-14-297-7687
Spanner Wrench

142977687
6800-2210: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-497-3437
Drift

144973437
214.15: RNCC: 3 | RNVC: 2
214-15: RNCC: 5 | RNVC: 2
3148511487792: RNCC: 5 | RNVC: 2
0224818N00: RNCC: 5 | RNVC: 2
F300 0T 023 0346: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-336-2532
Spanner Wrench

143362532
9970-111-159: RNCC: 3 | RNVC: 2
85-686-2524: RNCC: 6 | RNVC: 9

24 Jul 1976

5120-14-210-9815
Flat Tip Screwdriver

142109815
0005718: RNCC: 3 | RNVC: 2
210-1: RNCC: 3 | RNVC: 2
91300097: RNCC: 5 | RNVC: 2
A281S6X100: RNCC: 5 | RNVC: 2
AG.8X125: RNCC: 5 | RNVC: 2
91300097: RNCC: 5 | RNVC: 2
91639064: RNCC: 5 | RNVC: 2
AK6X100: RNCC: 5 | RNVC: 2
708-6X100: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-345-5518
Verrou Outil Montag

143455518
P3 1-2B2: RNCC: 3 | RNVC: 2
85-689-2505: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-483-2204
Extracteur Axe De F

144832204
330A93-3406-00: RNCC: 3 | RNVC: 2

28 Aug 1996

5120-14-387-1914
De Montag Outillage

143871914
MHL233-42: RNCC: 3 | RNVC: 2
MHL233-42: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-393-8798
Monte-Joint Outil

143938798
NO PRIMARY REF14-393-8798: RNCC: 3 | RNVC: 2
OU136841: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-297-7683
Spanner Wrench

142977683
6800-2206: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-357-4328
Socket Head Screw Key

143574328
7395CLEDE4MM: RNCC: 3 | RNVC: 2
XCELITE99-76MM: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-234-4286
Broche De Maintien

142344286
17899TREP10: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-518-8027
Pince De Prelevemen

145188027
RP192: RNCC: 3 | RNVC: 2

18 Feb 2000

5120-14-203-1376

5120-14-469-9279
Emmanchemen Mandrin

144699279
16849249: RNCC: 3 | RNVC: 2
16849249: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-368-0572
Outil Pr Pignon Ppe

143680572
25545904500: RNCC: 3 | RNVC: 2
255459045: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-244-6805

5120-14-286-7809

5120-14-376-0661

5120-14-357-3407
Spanner Wrench

143573407
E74-323-21A28: RNCC: 2 | RNVC: 2
951639: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-514-8416
Cross Tip Screwdriver

145148416
ENFD6569-2X400: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-555-4036
Torque Wrench Adapter

145554036
CLU02-102: RNCC: 3 | RNVC: 2

7 Nov 2007

5120-14-487-6641
Open End Wrench

144876641
8969-71400: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-514-1218
Six Point Tip Screwdriver

145141218
ENFD6566-1X5-5X150: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-476-4485
Spanner Wrench

144764485
0068-78: RNCC: 3 | RNVC: 2
85-693-8137: RNCC: 6 | RNVC: 9

14 Jun 1995

5120-14-286-2242
Open End Wrench

142862242
20.27: RNCC: 3 | RNVC: 2
101256: RNCC: 5 | RNVC: 2
C66537: RNCC: 5 | RNVC: 2
20-27: RNCC: 5 | RNVC: 2
3148510936703: RNCC: 5 | RNVC: 2
0093670: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-286-3998
Socket Wrench Handle Bar

142863998
M.125: RNCC: 3 | RNVC: 2
3148510323305: RNCC: 5 | RNVC: 2
M125: RNCC: 5 | RNVC: 2
0032330: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-272-3326
Tap And Reamer Wrench

142723326
3047-7: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-259-4742

5120-14-284-1952

5120-14-446-8984
Torque Wrench Adapter

144468984
11.23: RNCC: 3 | RNVC: 2
11-23: RNCC: 5 | RNVC: 2
3148510927251: RNCC: 5 | RNVC: 2
91629354: RNCC: 5 | RNVC: 2
0092725: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-374-0863
Socket Wrench Crowfoot Attachment

143740863
MHB303-43: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-520-0376
Drift

145200376
341A93-3800-20: RNCC: 3 | RNVC: 2

3 May 2000

5120-14-386-1647
Out Reglage Tabs

143861647
703A94-1131-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-362-7545

5120-14-249-4690

5120-14-463-4607
Cle Echange Joint

144634607
0UT21: RNCC: 3 | RNVC: 2
OUT21: RNCC: 5 | RNVC: 2

15 Jun 1993

5120-14-271-1242
Extracteur Axe

142711242
160Z088886: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-229-1863
Potence Pour Compre

142291863
A21841: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-555-9690
Locking Device Removal Tool

145559690
888-352-700-3: RNCC: 3 | RNVC: 2

16 Jan 2008

5120-14-242-9827
Pliers

142429827
43-5-12: RNCC: 3 | RNVC: 2
7-120: RNCC: 3 | RNVC: 2
1503-12: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-213-3792
Cle Rondelle Darret

142133792
NO PRIMARY REF14-213-3792: RNCC: 3 | RNVC: 2
1-1038-01-00-05: RNCC: 5 | RNVC: 9
1-1038-01-00-05: RNCC: 8 | RNVC: 2

1 Jan 1964

5120-14-409-9496
Socket Wrench Handle Bar

144099496
6711-05: RNCC: 3 | RNVC: 2
9151619180: RNCC: 5 | RNVC: 2
9151619180: RNCC: 5 | RNVC: 2

4 Jun 1986

5120-14-300-9632
Spanner Wrench

143009632
341A93-3307-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-222-7177
Open End Wrench

142227177
NO PRIMARY REF14-222-7177: RNCC: 3 | RNVC: 2
01218525: RNCC: 5 | RNVC: 2
BB73: RNCC: 5 | RNVC: 9
1144-8X10: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-237-2346
Embout

142372346
940836: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-566-6976
Screw Thread Insert Extractor

145666976
0567: RNCC: 3 | RNVC: 2
71860000002: RNCC: 5 | RNVC: 2

8 Dec 2010

5120-14-251-1956

5120-14-416-7527
Plaque D'appui

144167527
537295: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-559-8747
Ratchet Wrench

145598747
UT8011A: RNCC: 3 | RNVC: 2

26 Feb 2009

5120-14-420-7384
Pince Montage Resso

144207384
4753: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-460-3789
Couteau De Declench

144603789
701-1542: RNCC: 3 | RNVC: 2
12656: RNCC: 5 | RNVC: 2
85-694-3412: RNCC: 6 | RNVC: 9

21 Jan 1993

5120-14-556-1675
Tubing Pinch-Off Tool

145561675
208-18: RNCC: 3 | RNVC: 2

7 Feb 2008

5120-14-252-2945
Spanner Wrench

142522945
NO PRIMARY REF14-252-2945: RNCC: 3 | RNVC: 2
341063: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-488-1372
Open End Wrench

144881372
K7739-10BAX8BA: RNCC: 3 | RNVC: 2
10BAX8BA: RNCC: 5 | RNVC: 2

18 Apr 1997

5120-14-515-1509
Socket Wrench Screwdriver Attachment

145151509
ENFD6519-D34X85: RNCC: 3 | RNVC: 2
ENFD6519D34X85: RNCC: 3 | RNVC: 2

8 Jul 1999

5120-14-433-6386
Socket Head Screw Key

144336386
6259-60367: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-545-9825
Combination Box And Open End Wrench

145459825
40.1'1/4LA: RNCC: 3 | RNVC: 2
40.1'1/4L: RNCC: 5 | RNVC: 9

1 Jun 2005

5120-14-220-5723
Electron Tube Extractor

142205723
16183: RNCC: 3 | RNVC: 2
173602: RNCC: 5 | RNVC: 2
716183-00: RNCC: 5 | RNVC: 9
16183: RNCC: 5 | RNVC: 9
716183-00: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-276-3111
Socket Wrench Socket

142763111
S26L: RNCC: 3 | RNVC: 2
SL-26: RNCC: 3 | RNVC: 2
SL26: RNCC: 3 | RNVC: 2
65LT26: RNCC: 3 | RNVC: 2
3272670252936: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-525-0211
Combination Box And Open End Wrench Set

145250211
40-JU11: RNCC: 3 | RNVC: 2
40JU11: RNCC: 5 | RNVC: 2

15 May 2001

5120-14-222-7136
Open End Wrench

142227136
34.11/32: RNCC: 3 | RNVC: 2
3148510984001: RNCC: 5 | RNVC: 2
34 11-32: RNCC: 5 | RNVC: 2
34.11-32: RNCC: 5 | RNVC: 2
0098400: RNCC: 5 | RNVC: 9
34123: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-566-3242
Socket Wrench Socket

145663242
R.9/16EL: RNCC: 3 | RNVC: 2
3148510510903: RNCC: 5 | RNVC: 2
51090: RNCC: 5 | RNVC: 2

5 Nov 2010

5120-14-380-4067
Outillag Montag Rou

143804067
90890-06121: RNCC: 3 | RNVC: 2

8 Nov 1982

5120-14-222-7382
Open End Wrench

142227382
10-6X8: RNCC: 3 | RNVC: 2
10-6X8C: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-217-3649
Etau Special

142173649
NO PRIMARY REF14-217-3649: RNCC: 3 | RNVC: 2
225248: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-400-6889
Spanner Wrench

144006889
75-921-27-03: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-222-1412
Sheet Metalworking Dolly Block

142221412
0293000601: RNCC: 3 | RNVC: 2
293-120X100: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-500-6515
Retaining Ring Pliers

145006515
179E.32: RNCC: 3 | RNVC: 2
179E-32: RNCC: 5 | RNVC: 2
179E32: RNCC: 5 | RNVC: 2
3148511412978: RNCC: 5 | RNVC: 2
0141297: RNCC: 5 | RNVC: 9
F300 0T 024 6704: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-384-9213
Socket Wrench Socket

143849213
9970-126-118: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-328-1513

5120-14-318-6272
Extracteur Coffret

143186272
C46123: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-457-5493
Outillage Refrigera

144575493
24145: RNCC: 3 | RNVC: 2

10 Sep 1992

5120-14-380-8380
Spanner Wrench

143808380
C46009: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-397-8664
Socket Wrench Socket

143978664
005657210P: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-483-2768
Socket Wrench Screwdriver Attachment

144832768
0506628: RNCC: 3 | RNVC: 2
3148515066283: RNCC: 5 | RNVC: 2
JX.50: RNCC: 5 | RNVC: 2
JX50: RNCC: 5 | RNVC: 2
0715 123 50: RNCC: 5 | RNVC: 2

29 Aug 1996

5120-14-456-3065
Open End Wrench

144563065
11205: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-423-2290
Basculeur Cle Dyn

144232290
0747167: RNCC: 3 | RNVC: 2
SP.1735 D-3-1160: RNCC: 5 | RNVC: 2
SP1735D-3-1160: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-491-0155
Cle

144910155
4602 007 200 135: RNCC: 3 | RNVC: 2
F300 0T 001 0942: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-480-2670
Bearing And Bushing Remover

144802670
888-355-500-1: RNCC: 3 | RNVC: 2

28 Feb 1996

5120-14-422-2422
Mechanical Puller Attachment

144222422
0377-48125: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-336-3350
Flat Tip Screwdriver

143363350
832: RNCC: 3 | RNVC: 9
B32: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-14-576-1384
Parachu Pack Former

145761384
304228-0: RNCC: 3 | RNVC: 2

31 May 2013

5120-14-332-0458
Jeu Cde Leviers

143320458
9070-924: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-309-9492
Open End Wrench

143099492
22.10X11: RNCC: 3 | RNVC: 2
22-10X11: RNCC: 5 | RNVC: 2
3148510947808: RNCC: 5 | RNVC: 2
0094780: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-272-3668
Open End Wrench

142723668
E74302C38-39WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-401-0497
Open End Wrench

144010497
8929-780C: RNCC: 3 | RNVC: 2

29 May 1985

5120-14-385-3122
Positionneur Cloche

143853122
360A93-3228-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-295-2027
Hose Strap Band Clamping Tool

142952027
1099I: RNCC: 3 | RNVC: 2
TEN1099: RNCC: 3 | RNVC: 2
620-846-703-0: RNCC: 5 | RNVC: 2
1099: RNCC: 5 | RNVC: 2
SER0085568: RNCC: 5 | RNVC: 9
0085568: RNCC: 5 | RNVC: 9
85-800-8643: RNCC: 6 | RNVC: 9

1 Jan 1973

5120-14-314-7494
Electronic Equipment Alignment Tool

143147494
492695: RNCC: 3 | RNVC: 2
85-686-9743: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-376-6314
Cross Tip Screwdriver

143766314
NO PRIMARY REF14-376-6314: RNCC: 3 | RNVC: 2
465-3-1: RNCC: 5 | RNVC: 9

28 Apr 1982

5120-14-227-9272
Open End Wrench

142279272
31.12X13: RNCC: 3 | RNVC: 2
31.12X13: RNCC: 5 | RNVC: 2
31-12X13: RNCC: 5 | RNVC: 2
3148510970400: RNCC: 5 | RNVC: 2
8038829F00: RNCC: 5 | RNVC: 2
91392441: RNCC: 5 | RNVC: 2
162-8413: RNCC: 5 | RNVC: 2
0097040: RNCC: 5 | RNVC: 9
FACOM31.12X13: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-293-2761
Socket Wrench Handle Ratchet Head

142932761
M.151: RNCC: 3 | RNVC: 2
M-150: RNCC: 3 | RNVC: 2
M150: RNCC: 3 | RNVC: 2
400795REP5: RNCC: 5 | RNVC: 2
3148510323602: RNCC: 5 | RNVC: 2
M151: RNCC: 5 | RNVC: 2
99-250-31-151-1: RNCC: 5 | RNVC: 2
99250311511: RNCC: 5 | RNVC: 2
3272670208865: RNCC: 5 | RNVC: 2
0032360: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-374-0855
Spanner Wrench

143740855
MHJ314-21: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-487-5732
Plateau De Levage

144875732
K7739-12119: RNCC: 3 | RNVC: 2
12119: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-309-4799
Flat Tip Screwdriver Set

143094799
NO PRIMARY REF14-309-4799: RNCC: 3 | RNVC: 2
AS.21: RNCC: 5 | RNVC: 2
AS21: RNCC: 5 | RNVC: 2
3148515006852: RNCC: 5 | RNVC: 2
0500685: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-393-0287
Combination Box And Open End Wrench

143930287
41.28: RNCC: 3 | RNVC: 2
3148511013755: RNCC: 5 | RNVC: 2
41-28: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-517-0727
Open End Wrench

145170727
0M406-01: RNCC: 3 | RNVC: 2

3 Nov 1999

5120-14-212-9094
Emmanche-Joint Tori

142129094
9970-115-177: RNCC: 3 | RNVC: 2
9970-115-177-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-352-3142
Sertis Palier Outil

143523142
MFE290-44: RNCC: 3 | RNVC: 2
MFF290-21: RNCC: 5 | RNVC: 2
MFE290-44: RNCC: 5 | RNVC: 2
MFF290-22: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-237-7105

5120-14-436-0183
Support Et Mandrin

144360183
RT30251: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-463-1420
Bearing And Bushing Inserter And Remover

144631420
50348: RNCC: 3 | RNVC: 2
85-694-9655: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-205-5250
Hand Car Mover

142055250
NO PRIMARY REF14-205-5250: RNCC: 3 | RNVC: 2
FIG2: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-309-7437
Mechanical Puller Attachment

143097437
341A93-3519-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-447-1565
Socket Wrench Socket Set

144471565
OCE83-30: RNCC: 3 | RNVC: 2
91610040: RNCC: 5 | RNVC: 2
0CE83-30: RNCC: 5 | RNVC: 2

3 May 1991

5120-14-443-8456
Hole Sheet Metal Holder

144438456
50020515: RNCC: 3 | RNVC: 2
85-694-4315: RNCC: 6 | RNVC: 9

10 Dec 1990

5120-14-526-9198
Torque Wrench Multiplier

145269198
MA196-1223: RNCC: 3 | RNVC: 2

17 Sep 2001

5120-14-244-4254

5120-14-331-6586

5120-14-371-9716
Adapt Pist Pali Cle

143719716
8811747003: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-457-9767
Seal Inserter And Remover

144579767
523126: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-468-7084
Socket Wrench Screwdriver Attachment

144687084
0506624: RNCC: 3 | RNVC: 2
3148515066245: RNCC: 5 | RNVC: 2
JX.45: RNCC: 5 | RNVC: 2
JX45: RNCC: 5 | RNVC: 2
0715 123 45: RNCC: 5 | RNVC: 2

16 Mar 1994

5120-14-426-6706
Spanner Wrench

144266706
8815409000: RNCC: 3 | RNVC: 2
89415027: RNCC: 5 | RNVC: 2

15 Sep 1988

5120-14-306-4341
Wrench Extension Handle

143064341
8810120036: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-399-1996
Spanner Wrench

143991996
P069362-1: RNCC: 3 | RNVC: 2
0-69362-1: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-521-6485
Hole Sheet Metal Holder

145216485
BCME-H-2-4-6: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-522-9461
Spanner Wrench

145229461
4-201412: RNCC: 3 | RNVC: 9

13 Dec 2000

5120-14-214-4135

5120-14-435-2901
Spanner Wrench

144352901
330A93-3117-00: RNCC: 3 | RNVC: 2
F300 0T 009 9435: RNCC: 5 | RNVC: 9

2 Nov 1989

5120-14-386-9730
Outil Pr Montage

143869730
26545900200: RNCC: 3 | RNVC: 2
104816-01: RNCC: 5 | RNVC: 2
10481601: RNCC: 5 | RNVC: 2
26.545.9002.00: RNCC: 5 | RNVC: 2
26545900200: RNCC: 5 | RNVC: 2
265459002: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-204-3005
Cle Speciale

142043005
M3-044: RNCC: 3 | RNVC: 2
M3044: RNCC: 5 | RNVC: 2
M3-044: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-232-9932
Matrice De Sertissa

142329932
48755-1: RNCC: 3 | RNVC: 2
48755: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-285-4485
Spanner Wrench

142854485
ES5259: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-530-9209
Socket Wrench Socket

145309209
39070: RNCC: 3 | RNVC: 2
3148510390703: RNCC: 5 | RNVC: 2
NM.28: RNCC: 5 | RNVC: 2

17 Jul 2002

5120-14-390-2965
Graissage Montage

143902965
MF065-26: RNCC: 3 | RNVC: 2
85-692-4391: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-553-5365
Leveling-Support Jack

145535365
CC081879-600: RNCC: 3 | RNVC: 2

13 Apr 2007

5120-14-344-7859
Bearing And Bushing Inserter And Remover

143447859
8810577000: RNCC: 3 | RNVC: 2
85-689-4203: RNCC: 6 | RNVC: 9

9 Sep 1977

5120-14-319-9830
Spanner Wrench

143199830
NO PRIMARY REF14-319-9830: RNCC: 3 | RNVC: 2
48-58: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-338-4720
Screwdriver Handle

143384720
C46141-22: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-216-4183
Socket Wrench Crowfoot Attachment

142164183
300657: RNCC: 3 | RNVC: 2
300657: RNCC: 5 | RNVC: 2
100-145A: RNCC: 5 | RNVC: 9
100-45A: RNCC: 5 | RNVC: 9
145: RNCC: 5 | RNVC: 9
W0F145A: RNCC: 5 | RNVC: 9
145A: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-440-5488
Spanner Wrench

144405488
L65723363A: RNCC: 3 | RNVC: 2
F0362: RNCC: 5 | RNVC: 9
L65723363A: RNCC: 5 | RNVC: 9
F0362: RNCC: 5 | RNVC: 9
85-694-1074: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-363-5174
Spanner Wrench

143635174
NO PRIMARY REF14-363-5174: RNCC: 3 | RNVC: 2
413814: RNCC: 5 | RNVC: 9
85-691-2597: RNCC: 6 | RNVC: 9

9 May 1980

5120-14-550-1639
Socket Wrench Socket

145501639
730010S160-03C: RNCC: 3 | RNVC: 2

6 Jun 2006

5120-14-438-7770
Socket Wrench Socket

144387770
330A93-3300-00: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-263-2232

5120-14-207-4924
Spanner Wrench

142074924
8810003069: RNCC: 3 | RNVC: 2
6-000-315: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-447-3858
Socket Wrench Spanner Attachment

144473858
MEH188-1-2: RNCC: 3 | RNVC: 2
89280446: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-410-2361
Pliers

144102361
PINCE18-4: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-410-1558
Ergots Jeu

144101558
MUP5442-7: RNCC: 3 | RNVC: 2
5120-A1-000-4092: RNCC: 6 | RNVC: 9

4 Jun 1986

5120-14-202-9285
Mattock-Pick Handle

142029285
B54-514-1000-50: RNCC: 2 | RNVC: 2

1 Jan 1963

5120-14-541-6841
Socket Head Screw Key

145416841
006202AIRCLEMALE6PANSBE-CU: RNCC: 3 | RNVC: 2
C197M: RNCC: 5 | RNVC: 2

17 Jun 2004

5120-14-313-7279
Douille A Ergots Eq

143137279
PR47350: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-303-3936

5120-14-357-9961
Cle Detau

143579961
MHC301-43: RNCC: 3 | RNVC: 2
MHC301-43: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-262-9725
Extracteur Prise Tl

142629725
6800-2127: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-455-0153
Socket Wrench Socket

144550153
NO PRIMARY REF14-455-0153: RNCC: 3 | RNVC: 2
161355: RNCC: 5 | RNVC: 9

1 May 1992

5120-14-324-4716
Douille De Montage

143244716
330A93-2012-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-229-8604
Open End Wrench

142298604
E74302C9-12WWK: RNCC: 2 | RNVC: 1
15-9X12: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-489-7890
Screwdriver Bit

144897890
NO PRIMARY REF14-489-7890: RNCC: 3 | RNVC: 2
3148510227719: RNCC: 5 | RNVC: 2
EF.LS604: RNCC: 5 | RNVC: 2
0022771: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-272-3642
Open End Wrench

142723642
E74302C8-9WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-526-7594
Handling Tool Arm

145267594
J05862-06-2000A000: RNCC: 3 | RNVC: 2
SYB3764: RNCC: 5 | RNVC: 2

4 Sep 2001

5120-14-480-1845
Outil De Maintien

144801845
SJ151-9000-1: RNCC: 3 | RNVC: 2
EA2-0314: RNCC: 5 | RNVC: 2

26 Feb 1996

5120-14-326-5616
Electronic Equipment Tuning Wand

143265616
1066017-1: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-232-3908
Tap And Reamer Wrench

142323908
E66130 N0: RNCC: 2 | RNVC: 2
FTG1: RNCC: 3 | RNVC: 2
3047-1: RNCC: 3 | RNVC: 9
3272670295520: RNCC: 5 | RNVC: 2
5120AAGN0: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-443-6318
Adaptateur

144436318
NO PRIMARY REF14-443-6318: RNCC: 3 | RNVC: 2
OU133471-2: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-377-8691
Hand Terminal Crimping Tool

143778691
654149-1: RNCC: 3 | RNVC: 2
85-691-8742: RNCC: 6 | RNVC: 9

10 Jun 1982

5120-14-450-7476
Flat Tip Screwdriver

144507476
NO PRIMARY REF14-450-7476: RNCC: 3 | RNVC: 2
641100: RNCC: 5 | RNVC: 9
EI.3,5X75: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-522-3961
Sheet Metalworking Stake

145223961
0706100: RNCC: 3 | RNVC: 2
NML706-10: RNCC: 5 | RNVC: 2

25 Oct 2000

5120-14-343-9854
Cle Pour Ecrou Dent

143439854
9970-115-554: RNCC: 3 | RNVC: 2
85-689-5610: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-425-9250
Mandrin Emmanchemen

144259250
600104: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-410-3291
Cimblot Emmanchemen

144103291
8814645000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-040-2969
Extracteur De Bague

140402969
RT6107: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-219-2201

5120-14-254-2459

5120-14-263-2233

5120-14-352-3155
Drift

143523155
MGA357-21: RNCC: 3 | RNVC: 2
MGA357-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-523-8130
Piston Ring Expander

145238130
02240900003: RNCC: 3 | RNVC: 2
365452-00: RNCC: 5 | RNVC: 2

2 Feb 2001

5120-14-564-8140
Socket Wrench

145648140
D11-17: RNCC: 3 | RNVC: 2

8 Jun 2010

5120-14-323-8550
Electrical Card Extractor

143238550
11-372-200: RNCC: 3 | RNVC: 2
11-372-200: RNCC: 5 | RNVC: 9
11372200: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-319-4710
Electrical Contact Inserter And Remover

143194710
50-1011: RNCC: 3 | RNVC: 2
00-829-6176: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-370-6292
Outil Chauf Collage

143706292
6216E11-1220-00: RNCC: 3 | RNVC: 2
62-16-330-11-1220-00: RNCC: 5 | RNVC: 2
62-16-330A11-1220-00: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-388-2323
Flat Tip Screwdriver

143882323
VTR501-2-1129: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-401-6067
Cone De Retreind

144016067
NO PRIMARY REF14-401-6067: RNCC: 3 | RNVC: 2
OU141347: RNCC: 5 | RNVC: 9
0U141347: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-302-6079
Flat Tip Screwdriver

143026079
AB7-5X100: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-444-3485
Socket Wrench Socket

144443485
GS86-08: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-358-3633
Cross Tip Screwdriver

143583633
705-1: RNCC: 3 | RNVC: 9
DEM705-1: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-490-6879
Drill

144906879
240 D 01884 006: RNCC: 3 | RNVC: 2
F300 0T 000 0988: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-224-9922

5120-14-268-1561

5120-14-357-9981
Equipe Guignol

143579981
MKM0434100: RNCC: 3 | RNVC: 2
MKM0434100: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-535-3368
Mechanical Puller Adapter

145353368
27179925-6: RNCC: 3 | RNVC: 2
8043631A00: RNCC: 5 | RNVC: 2

22 May 2003

5120-14-262-9292
Cle Speciale Pour E

142629292
21144017200: RNCC: 3 | RNVC: 2
144H172: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-466-4069
Sertissag Outillage

144664069
MMG070A13: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-236-6359

5120-14-236-2626

5120-14-310-5431
Cle Mano-Contact Dh

143105431
T153R: RNCC: 3 | RNVC: 2
M0T232-01: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-552-5234
Screwdriver Bit

145525234
ES.603,5: RNCC: 3 | RNVC: 2
ES.603,5: RNCC: 5 | RNVC: 2
3148510248295: RNCC: 5 | RNVC: 2

11 Jan 2007

5120-14-467-4234
Cle Serrage

144674234
0600039A60Z065: RNCC: 3 | RNVC: 2
0600039AC-Z065: RNCC: 3 | RNVC: 9
RAB3586: RNCC: 5 | RNVC: 2
RAB7679: RNCC: 5 | RNVC: 2
0600039ACIE065: RNCC: 5 | RNVC: 9

12 Jan 1994

5120-14-508-7302
Spanner Wrench

145087302
300A97004: RNCC: 3 | RNVC: 2
300A97004: RNCC: 5 | RNVC: 2

29 Sep 1998

5120-14-397-4837
Socket Head Screw Key Blade

143974837
EDS2: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-380-8393
Spanner Wrench

143808393
PR47624M1: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-351-2381
Spanner Wrench

143512381
489320U: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-550-7721
Socket Wrench Screwdriver Attachment

145507721
0715 113 25: RNCC: 3 | RNVC: 2

13 Jul 2006

5120-14-456-3088
Open End Wrench

144563088
34014: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-454-1541
Screwdriver Bit

144541541
ENX.225: RNCC: 3 | RNVC: 2
3148510239859: RNCC: 5 | RNVC: 2
0023985: RNCC: 5 | RNVC: 9

24 Mar 1992

5120-14-348-5096

5120-14-232-7188
Hand Terminal Crimping Tool

142327188
0-0059500-0: RNCC: 3 | RNVC: 2
59500: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-516-9017
Flat Tip Screwdriver

145169017
AZB.6,5X40: RNCC: 3 | RNVC: 2
ACB.6,5X40: RNCC: 3 | RNVC: 2
3148510038704: RNCC: 5 | RNVC: 2
0613 336 8: RNCC: 5 | RNVC: 2
0003870: RNCC: 5 | RNVC: 9

20 Oct 1999

5120-14-549-9735
Socket Wrench Handle

145499735
S.141A: RNCC: 3 | RNVC: 2
3148516619174: RNCC: 5 | RNVC: 2
S.141A: RNCC: 5 | RNVC: 2

19 May 2006

5120-14-282-9202
Socket Wrench Socket

142829202
J.18H: RNCC: 3 | RNVC: 2
3148510275000: RNCC: 5 | RNVC: 2
J18H: RNCC: 5 | RNVC: 2
0713 121 118: RNCC: 5 | RNVC: 2
0027500: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-200-9491
Socket Wrench Socket

142009491
M.50: RNCC: 3 | RNVC: 2
M50: RNCC: 5 | RNVC: 2
3148510317205: RNCC: 5 | RNVC: 2
0031720: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-315-1859
Chasse-Roulem Acces

143151859
0-62790-1-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-466-6741
Socket Wrench Socket

144666741
RJ-425E: RNCC: 3 | RNVC: 2
3148515134500: RNCC: 5 | RNVC: 2
162-0649: RNCC: 5 | RNVC: 2
FACOMRJ-425E: RNCC: 5 | RNVC: 9

24 Nov 1993

5120-14-384-7344
Electrical Card Extractor

143847344
NO PRIMARY REF14-384-7344: RNCC: 3 | RNVC: 2
16931979: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-238-2981
Flat Tip Screwdriver

142382981
79-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-524-1301
Combination Lock Reset Key

145241301
NO PRIMARY REF14-524-1301: RNCC: 3 | RNVC: 2
5669192A: RNCC: 5 | RNVC: 9

5 Mar 2001

5120-14-521-6324
Hole Sheet Metal Holder

145216324
30-24: RNCC: 3 | RNVC: 2
30-24: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-345-5493
Open End Wrench

143455493
M2-066: RNCC: 3 | RNVC: 2
85-676-7470: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-427-2511
Spanner Wrench

144272511
488402M84-06P7: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-463-9765
Metallique Jet

144639765
854-500-311-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-435-0658
Ensemb Chasse-Rivet

144350658
851-910-019-0: RNCC: 3 | RNVC: 2
MO6658-3: RNCC: 5 | RNVC: 9

18 Oct 1989

5120-14-456-3089
Hand Terminal Crimping Tool

144563089
41000: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-556-3718
Nutdriver

145563718
U-1934: RNCC: 3 | RNVC: 2

3 Mar 2008

5120-14-403-5719
Cle Montage Brancar

144035719
330A93-8700-00: RNCC: 3 | RNVC: 2

21 Aug 1985

5120-14-384-7345
Electrical Card Extractor

143847345
NO PRIMARY REF14-384-7345: RNCC: 3 | RNVC: 2
16931982: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-217-3636

5120-14-560-1513
Nutdriver

145601513
10474370: RNCC: 3 | RNVC: 2

30 Mar 2009

5120-14-286-2232
Open End Wrench

142862232
20.14: RNCC: 3 | RNVC: 2
20-14: RNCC: 5 | RNVC: 2
3148510935409: RNCC: 5 | RNVC: 2
0093540: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-553-7857
Socket Wrench Socket

145537857
260534815-00: RNCC: 3 | RNVC: 2

22 May 2007

5120-14-043-1039
Spanner Wrench

140431039
0762015B00: RNCC: 3 | RNVC: 2
069U20-762015B: RNCC: 5 | RNVC: 2

10 Apr 1984

5120-14-522-0233
Socket Wrench Socket

145220233
OCE83-30D: RNCC: 3 | RNVC: 2
0CE83-30D: RNCC: 5 | RNVC: 2

29 Sep 2000

5120-14-444-3184
Combination Box And Open End Wrench

144443184
GS130-12: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-212-9145
Tournevis Reglage F

142129145
9970-115-162: RNCC: 3 | RNVC: 2
9970-115-162-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-572-2515
Piston Inserter

145722515
TO/C.141.542.20: RNCC: 3 | RNVC: 2

18 Jun 2012

5120-14-539-9827
Socket Wrench Socket

145399827
OCE91-113C-1: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-443-6317
Adaptateur

144436317
NO PRIMARY REF14-443-6317: RNCC: 3 | RNVC: 2
OU133471-1: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-304-4084
Wrench Kit

143044084
TMY20-71-301: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-245-2081
Electrical Contact Inserter

142452081
M15513-16: RNCC: 3 | RNVC: 2
00-987-7241: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-462-1713
Outil Montage Pigno

144621713
7-010439-7: RNCC: 3 | RNVC: 2
7-010439-7: RNCC: 5 | RNVC: 9

13 Apr 1993

5120-14-558-9080
Ratchet Wrench

145589080
W-960A: RNCC: 3 | RNVC: 2

20 Nov 2008

5120-14-513-3800
Cross Tip Screwdriver

145133800
APY.0X75VE: RNCC: 3 | RNVC: 2
3148510095554: RNCC: 5 | RNVC: 2
0613 181 0: RNCC: 5 | RNVC: 2
APY.0X75VSE: RNCC: 5 | RNVC: 2
APY.0X75VSE: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-296-6192
Spanner Wrench

142966192
0-76389-1: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-200-9326
Socket Wrench Socket

142009326
S.5/8: RNCC: 3 | RNVC: 2
3148510544007: RNCC: 5 | RNVC: 2
S5-8: RNCC: 5 | RNVC: 2
0054400: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-567-9726
Cord-Rop Pull Wire

145679726
CO070063: RNCC: 3 | RNVC: 2

29 Apr 2011

5120-14-427-6507
Socket Head Screw Key

144276507
NO PRIMARY REF14-427-6507: RNCC: 3 | RNVC: 2
E0949635: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-441-4687
Socket Wrench Extension

144414687
GS84L: RNCC: 3 | RNVC: 2
GS81-10: RNCC: 5 | RNVC: 2

29 Aug 1990

5120-14-444-3466
Socket Wrench Socket

144443466
GS86L-06: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-303-8139
Lifting Pneumatic Bag

143038139
53174C: RNCC: 3 | RNVC: 2
50-5T: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-222-1659

5120-14-377-3715
Tire Fort

143773715
F3: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-341-2924

5120-14-274-5012

5120-14-497-7994
Outillage De Depose

144977994
T60UT0015000: RNCC: 3 | RNVC: 2

20 Oct 1997

5120-14-263-2657

5120-14-260-8575
Cavalier Montage So

142608575
85980: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-370-4876
Hand Terminal Crimping Tool

143704876
38909: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-262-9680
Spanner Wrench

142629680
30-72677: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-419-2606
Vise Jaw Caps

144192606
530623: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-368-0568
Piston Ring Compressor

143680568
25545804000: RNCC: 3 | RNVC: 2
255458040: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-530-2062
Pliers

145302062
188.E16CPY: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-549-9410
Screwdriver Bit

145499410
EH.204L: RNCC: 3 | RNVC: 2

18 May 2006

5120-14-528-3846
Spanner Wrench

145283846
01810076: RNCC: 3 | RNVC: 2

24 Jan 2002

5120-14-271-7953
Outil D'installatio

142717953
380431-2: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-249-6735
Douille Speciale Cl

142496735
2-02499: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-298-4571
Socket Head Screw Key

142984571
84.1/4: RNCC: 3 | RNVC: 2
3148511253601: RNCC: 5 | RNVC: 2
84 1-4: RNCC: 5 | RNVC: 2
0125360: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-288-1539

5120-14-418-2032
Flat Tip Screwdriver

144182032
DC.6: RNCC: 3 | RNVC: 2
3148510198705: RNCC: 5 | RNVC: 2
DC6: RNCC: 5 | RNVC: 2
0019870: RNCC: 5 | RNVC: 9

6 Aug 1987

5120-14-263-2698

5120-14-440-0969
Screwdriver Handle

144400969
AMH.1: RNCC: 3 | RNVC: 2
0007150: RNCC: 5 | RNVC: 2
0163073T00: RNCC: 5 | RNVC: 2
91604567: RNCC: 5 | RNVC: 2
AMH1: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-531-9682
Sleeve Stretching Pliers

145319682
454.1: RNCC: 3 | RNVC: 2

2 Oct 2002

5120-14-486-4098
Swivel Knob Jeweler's Screwdriver

144864098
ARE.1,6X19: RNCC: 3 | RNVC: 2
3148510109503: RNCC: 5 | RNVC: 2
0613 460 04: RNCC: 5 | RNVC: 2
0010950: RNCC: 5 | RNVC: 9

18 Mar 1997

5120-14-483-0691
Socket Wrench Socket Set

144830691
S.430DP: RNCC: 3 | RNVC: 2
3148515163906: RNCC: 5 | RNVC: 2
516390: RNCC: 5 | RNVC: 2

8 Aug 1996

5120-14-288-9935
Flat Tip Screwdriver

142889935
221-1: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-201-3065
Flat Tip Screwdriver

142013065
ATH175: RNCC: 3 | RNVC: 2
104-5: RNCC: 3 | RNVC: 2
TFT81: RNCC: 3 | RNVC: 2
271-8: RNCC: 3 | RNVC: 2
3272670219168: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-222-6168
Socket Wrench Socket

142226168
J-3/4: RNCC: 3 | RNVC: 2
J.3/4: RNCC: 3 | RNVC: 2
J3-4: RNCC: 3 | RNVC: 2
3148510278209: RNCC: 5 | RNVC: 2
3272670276192: RNCC: 5 | RNVC: 2
CAE00925: RNCC: 5 | RNVC: 2
J3-4: RNCC: 5 | RNVC: 2
0027820: RNCC: 5 | RNVC: 9
74J3-4: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-503-3660
Parachute Packing Spring Compressor

145033660
302-1: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-468-0194
Open End Wrench

144680194
7-011285-2: RNCC: 3 | RNVC: 2
7-011285-2: RNCC: 5 | RNVC: 9

8 Feb 1994

5120-14-225-5618
Cle

142255618
NO PRIMARY REF14-225-5618: RNCC: 3 | RNVC: 2
10671DET7: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-386-1593
Support Extracteur

143861593
6801P32-4013-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-396-1788
Ecrou Blocage Cle

143961788
0439-200900: RNCC: 3 | RNVC: 2
O439-200900: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-343-8361
Graissage Montage

143438361
MF012-22-00: RNCC: 3 | RNVC: 2

13 Jul 1977

5120-14-263-2878
Spanner Wrench

142632878
3780901103: RNCC: 3 | RNVC: 2
78090110: RNCC: 3 | RNVC: 2
XE30-40: RNCC: 3 | RNVC: 2
70005637: RNCC: 3 | RNVC: 2
XE30-40: RNCC: 5 | RNVC: 9
3780901103: RNCC: 5 | RNVC: 9
70005637: RNCC: 5 | RNVC: 9
78090110: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-291-8135
Open End Wrench

142918135
70-12X14: RNCC: 3 | RNVC: 2
3272670208711: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-249-3929
Spanner Wrench

142493929
3210-95-34-002: RNCC: 3 | RNVC: 2
08-330: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-232-2306
Cross Tip Screwdriver

142322306
NO PRIMARY REF14-232-2306: RNCC: 3 | RNVC: 2
79-74P: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-264-0573
Flat Tip Screwdriver

142640573
E74-351-0-4: RNCC: 2 | RNVC: 2
D1553B8661: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-298-8407
Open End Wrench

142988407
EFF1-060-105: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-315-4287
Spanner Wrench

143154287
Y075-011: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-466-7529
Cross Tip Screwdriver Set

144667529
ATHH.PJ3: RNCC: 3 | RNVC: 2
0500716: RNCC: 5 | RNVC: 2
3148515007163: RNCC: 5 | RNVC: 2
ATHHPJ3: RNCC: 5 | RNVC: 2
91745244: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-323-2093
Torque Wrench Adapter

143232093
A155: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-457-4367
Bearing And Bushing Inserter And Remover

144574367
45057795: RNCC: 3 | RNVC: 2
45057795: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-392-0840
Spanner Wrench

143920840
853-115-090-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-322-7755
Open End Wrench

143227755
22 7-32X9-32: RNCC: 3 | RNVC: 2
22.7/32X9/32: RNCC: 3 | RNVC: 2
3148510949208: RNCC: 3 | RNVC: 2
524-7-32X9-32: RNCC: 3 | RNVC: 9
22-7-32X9-32: RNCC: 5 | RNVC: 2
0094920: RNCC: 5 | RNVC: 9
DEM524-7-32X9-32: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-250-0296
Hand Tube Flaring Tool

142500296
239M239E: RNCC: 3 | RNVC: 2
2505-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-476-6878
Hand Armament Subsystem Carrier

144766878
1102357T00: RNCC: 3 | RNVC: 2

28 Jun 1995

5120-14-490-6891
Drill

144906891
240 D 01884 019: RNCC: 3 | RNVC: 2
F300 0T 000 1000: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-445-7062
Torque Wrench Adapter

144457062
10.5/8: RNCC: 3 | RNVC: 2
3148510926209: RNCC: 5 | RNVC: 2
0092620: RNCC: 5 | RNVC: 9

22 Feb 1991

5120-14-315-1866
Mechanical Puller Attachment

143151866
0-65045-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-419-4727
Open End Wrench

144194727
F52219-4: RNCC: 3 | RNVC: 2

21 Oct 1987

5120-14-204-8069
Hand Abrasive Wheel Dresser

142048069
2306-13: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-425-0348
Socket Wrench Extension

144250348
K.215A: RNCC: 3 | RNVC: 2
K215A: RNCC: 5 | RNVC: 2
0715 141 06: RNCC: 5 | RNVC: 2
3148510310558: RNCC: 5 | RNVC: 2
0031055: RNCC: 5 | RNVC: 9

16 Jun 1988

5120-14-481-5133
Female Electrical Contact Resizing Tool

144815133
3-0481552-4: RNCC: 3 | RNVC: 2

14 May 1996

5120-14-545-6552
Hand Blind Riveter

145456552
Y-RIV2: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-419-9311
Rotating Members Aligning Tool

144199311
10582: RNCC: 3 | RNVC: 2
10582: RNCC: 5 | RNVC: 9

10 Nov 1987

5120-14-424-1160
Six Point Tip Screwdriver

144241160
3148510040943: RNCC: 3 | RNVC: 2
ACX.10: RNCC: 5 | RNVC: 2
1040594C00: RNCC: 5 | RNVC: 2
16400577-8: RNCC: 5 | RNVC: 2
0004094: RNCC: 5 | RNVC: 9

17 May 1988

5120-14-312-3271
Pinces Jeu

143123271
HK1-115-117-119-121-123-125: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-446-1511
Slip Joint Pliers

144461511
NO PRIMARY REF14-446-1511: RNCC: 3 | RNVC: 2
180AVS: RNCC: 5 | RNVC: 2
91628049: RNCC: 5 | RNVC: 2
0141650: RNCC: 5 | RNVC: 2
180A.VS: RNCC: 5 | RNVC: 2
MO003140: RNCC: 6 | RNVC: 9

6 Mar 1991

5120-14-031-9652
Reglage Frein Outil

140319652
M31-101: RNCC: 3 | RNVC: 2
M31-101: RNCC: 5 | RNVC: 9

5 Jul 1980

5120-14-273-6532
Cle De Mise En Oeuv

142736532
80900-110: RNCC: 3 | RNVC: 2
78321: RNCC: 5 | RNVC: 2
85-641-6920: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-385-3464
Out Prise De Cote

143853464
6805J33-4008-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-486-2522
Open End Wrench

144862522
282-1-O-202: RNCC: 3 | RNVC: 2

5 Mar 1997

5120-14-475-9376
Adaptateur Cannele

144759376
MAT171-0435F4: RNCC: 3 | RNVC: 2

11 May 1995

5120-14-248-1076
Cle Leve-Frein

142481076
NO PRIMARY REF14-248-1076: RNCC: 3 | RNVC: 2
11207: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-204-3022
Tournevis Special

142043022
M3-033: RNCC: 3 | RNVC: 2
M3-033: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-304-3776
Spanner Wrench

143043776
Y075-008-000: RNCC: 3 | RNVC: 2
80900-840: RNCC: 5 | RNVC: 2
Y075-008: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-249-3957
Bearing Staking Installation Tool

142493957
3210-97-33-103: RNCC: 3 | RNVC: 2
08-297: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-454-3306
Cle De Serrage Angu

144543306
DM.360: RNCC: 3 | RNVC: 2
0713 71 12: RNCC: 5 | RNVC: 2
3148510199351: RNCC: 5 | RNVC: 2
DM360: RNCC: 5 | RNVC: 2
130478: RNCC: 5 | RNVC: 9
0019935: RNCC: 5 | RNVC: 9

1 Apr 1992

5120-14-566-7008
Screw Thread Insert Inserter

145667008
051616200: RNCC: 3 | RNVC: 2
71710160001: RNCC: 5 | RNVC: 2

8 Dec 2010

5120-14-223-8236

5120-14-238-3001

5120-14-216-2829

5120-14-424-3410
Flat Tip Screwdriver

144243410
E74-351-0-7X5X100RONDE: RNCC: 2 | RNVC: 2
E74351-0-7X5X100RONDE: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-491-0148
Cle

144910148
4602 007 200 081: RNCC: 3 | RNVC: 2
F300 0T 001 0934: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-571-7365
Screwdriver Bit

145717365
E-111-H5: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-368-1440
Socket Head Screw Key

143681440
0124580: RNCC: 3 | RNVC: 2
83 3-8: RNCC: 5 | RNVC: 2
83.3/8: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-262-5505
Cle

142625505
0-73814: RNCC: 3 | RNVC: 2
073814: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-326-2557
Pistons Mont Bague

143262557
18351: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-569-8749
Mechanical Puller Attachment

145698749
U.53H3: RNCC: 3 | RNVC: 2
070371: RNCC: 5 | RNVC: 2
3148510703718: RNCC: 5 | RNVC: 2
0070371: RNCC: 5 | RNVC: 9

26 Oct 2011

5120-14-363-9544
M Cab Cle A Coquill

143639544
16380253: RNCC: 3 | RNVC: 2
16380253: RNCC: 5 | RNVC: 9

7 Aug 1980

5120-14-334-8132
Socket Head Screw Key

143348132
0124070: RNCC: 3 | RNVC: 2
83-7: RNCC: 5 | RNVC: 2
83.7: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-447-7372
Bride Maintien Chem

144477372
26145043000: RNCC: 3 | RNVC: 2
107096-00: RNCC: 5 | RNVC: 2
216498-00: RNCC: 5 | RNVC: 2
43321844: RNCC: 5 | RNVC: 2

29 May 1991

5120-14-295-6385
Open End Wrench

142956385
19-17: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-430-1073
Spanner Wrench

144301073
6232-54671: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-319-4522
Tas Extraction Bala

143194522
3130S95-47-009: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-401-4120
Spanner Wrench

144014120
332A93-3300-20: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-554-7815
Electronic Component Inserter And Remover

145547815
260733145-00: RNCC: 3 | RNVC: 2

22 Aug 2007

5120-14-442-1521
Serre Toles Outil

144421521
853-600-253-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-556-2720
Electrical Contact Remover

145562720
025-0711-06: RNCC: 3 | RNVC: 2

19 Feb 2008

5120-14-437-4286
Segments Mont Bague

144374286
16380765: RNCC: 3 | RNVC: 2
16380765: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-558-9444
Six Point Tip Screwdriver

145589444
775607: RNCC: 3 | RNVC: 2
ANXP40X150: RNCC: 3 | RNVC: 2
3148517756076: RNCC: 5 | RNVC: 2

24 Nov 2008

5120-14-574-3968
Reinforcing Bar Bending Bar

145743968
460401: RNCC: 3 | RNVC: 2

16 Jan 2013

5120-14-574-5033
Socket Wrench Socket

145745033
NS.27A: RNCC: 3 | RNVC: 2
3148516548641: RNCC: 5 | RNVC: 2
654864: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-14-201-4597

5120-14-238-6653

5120-14-366-4283
Orient Pince Vissee

143664283
A9101356: RNCC: 3 | RNVC: 2
A910-1356: RNCC: 5 | RNVC: 2

20 Nov 1980

5120-14-247-9808
Adaptateur Plan Cen

142479808
160-71960-17: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-352-3156
Manuel Extracteur

143523156
STM07604: RNCC: 3 | RNVC: 2
MGB288-27: RNCC: 5 | RNVC: 2
STM076-04: RNCC: 5 | RNVC: 2
STM076-04: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-576-9463
Screwdriver Bit

145769463
33-ML-990-RAB-0-KU: RNCC: 3 | RNVC: 2

24 Jul 2013

5120-14-409-5142
Outill Reglag Contr

144095142
8814396000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-430-8215
Blocage Verrou

144308215
301706: RNCC: 3 | RNVC: 2

22 Mar 1989

5120-14-576-6650
Socket Wrench Socket

145766650
82555303000: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-14-270-9312

5120-14-485-8837
Cle

144858837
NNP5120878750761: RNCC: 3 | RNVC: 2

19 Feb 1997

5120-14-374-0866
Socket Wrench Crowfoot Attachment

143740866
UHB101-44: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-430-0858
Spanner Wrench

144300858
6814-58792: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-393-8831
Torque Wrench Adapter

143938831
NO PRIMARY REF14-393-8831: RNCC: 3 | RNVC: 2
OU139831: RNCC: 5 | RNVC: 9

7 Mar 1996

5120-14-453-6193
Socket Wrench Adapter

144536193
EL001-12: RNCC: 3 | RNVC: 2

3 Mar 1992

5120-14-232-1676
Open End Wrench

142321676
13 25-32X13-16: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-408-7384
Combination Box And Open End Wrench

144087384
40-20: RNCC: 3 | RNVC: 2

2 Apr 1986

5120-14-331-0796
Electrical Card Extractor

143310796
NO PRIMARY REF14-331-0796: RNCC: 3 | RNVC: 2
4698A: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-329-8847
Spanner Wrench

143298847
3511 130 89731: RNCC: 3 | RNVC: 2
3511-130-89731: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-427-7612
Spanner Wrench

144277612
NO PRIMARY REF14-427-7612: RNCC: 3 | RNVC: 2
E0949626: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-483-0692
Cross Tip Screwdriver

144830692
NO PRIMARY REF14-483-0692: RNCC: 3 | RNVC: 2
3148510093406: RNCC: 5 | RNVC: 2
APH.4X200: RNCC: 5 | RNVC: 2
0009340: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-405-9748
Spanner Wrench

144059748
0U50334: RNCC: 3 | RNVC: 2
85-692-6978: RNCC: 6 | RNVC: 9

12 Dec 1985

5120-14-496-8932
Socket Head Screw Key

144968932
DIN911-4FE-NI10BCRR: RNCC: 3 | RNVC: 2
F300 0T 022 2425: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-417-6866
Inserted Hammer Face

144176866
602-32: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-14-241-0497
Poincon De Bourreli

142410497
964-4: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-449-0156
Screwdriver Bit

144490156
MEH503-2: RNCC: 3 | RNVC: 2
89280367: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-454-9416
Flat Tip Screwdriver

144549416
AEF1,5X35: RNCC: 3 | RNVC: 2
3148510048826: RNCC: 5 | RNVC: 2
104-3907: RNCC: 5 | RNVC: 2
FACOMAEF1,5X35: RNCC: 5 | RNVC: 9
004882: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-314-2342
Socket Wrench Crowfoot Attachment

143142342
160-71960-13: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-212-9565
Levier De Maintien

142129565
NO PRIMARY REF14-212-9565: RNCC: 3 | RNVC: 2
156476: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-297-7696
Open End Wrench

142977696
6800-2220: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-542-0380
Final Drive Assembly Alignment Pin

145420380
21112111-417: RNCC: 3 | RNVC: 2
502118X04027A: RNCC: 3 | RNVC: 9

2 Jul 2004

5120-14-371-8960
Retaining Ring Pliers

143718960
5168: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-570-1488
Electrical Connector Inserter

145701488
6103.4929.00: RNCC: 3 | RNVC: 2

22 Nov 2011

5120-14-304-3771
Spanner Wrench

143043771
Y075-002-000: RNCC: 3 | RNVC: 2
80900-540: RNCC: 5 | RNVC: 2
Y075-002: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-284-6181
Flat Tip Screwdriver

142846181
NO PRIMARY REF14-284-6181: RNCC: 3 | RNVC: 2
BB 62: RNCC: 5 | RNVC: 9
BB62: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-311-6249
Open End Wrench

143116249
9970-115-197: RNCC: 3 | RNVC: 2
9970-115-197-00: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-319-4068
Torque Wrench Adapter

143194068
DC11-16: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-517-0728
Open End Wrench

145170728
MHD104-22: RNCC: 3 | RNVC: 2

3 Nov 1999

5120-14-406-9996
Douille De Montage

144069996
780BELOG3-3S: RNCC: 3 | RNVC: 2

24 Jan 1986

5120-14-442-5708
Open End Wrench

144425708
GS120-6X7: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-14-222-7374
Open End Wrench

142227374
20S17X16: RNCC: 3 | RNVC: 2
19-17X16: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-539-3151
Mechanical Puller Body

145393151
T651G3005221: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-270-5481
Carpenters' Pincers

142705481
987: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-433-6255
Flat Tip Screwdriver

144336255
AGH.8X150: RNCC: 3 | RNVC: 2
AGH.8X150: RNCC: 5 | RNVC: 2
1052309R00: RNCC: 5 | RNVC: 2
3148510058573: RNCC: 5 | RNVC: 2
AGH8X150: RNCC: 5 | RNVC: 2
0005857: RNCC: 5 | RNVC: 9

2 Aug 1989

5120-14-467-2791
Mechanical Puller Attachment

144672791
31-43107: RNCC: 3 | RNVC: 2
31-43107: RNCC: 5 | RNVC: 9

23 Dec 1993

5120-14-342-3610
Open End Wrench

143423610
RT9359: RNCC: 3 | RNVC: 2

14 Apr 1977

5120-14-432-8861
Socket Wrench Socket

144328861
M4Z7101942820: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-384-1987
Faux Mors

143841987
26-281-9: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-471-5092
Pliers

144715092
0175985: RNCC: 3 | RNVC: 2
431-L: RNCC: 5 | RNVC: 2
431.L: RNCC: 5 | RNVC: 2

31 Aug 1994

5120-14-472-3517
Socket Head Screw Key

144723517
82H.3: RNCC: 3 | RNVC: 2
3148511230312: RNCC: 5 | RNVC: 2
82H.3: RNCC: 5 | RNVC: 2
0110670S00: RNCC: 5 | RNVC: 2
235-2886: RNCC: 5 | RNVC: 2
0715 31 38: RNCC: 5 | RNVC: 2
FACOM82H.3: RNCC: 5 | RNVC: 9
0123031: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-406-6397
Soupape Guide

144066397
OUT50363: RNCC: 3 | RNVC: 2
0UT50363: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-490-8787
Tournev

144908787
4065 200 000 664: RNCC: 3 | RNVC: 2
F300 0T 000 5057: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-448-4590
Open End Wrench

144484590
0102423: RNCC: 3 | RNVC: 2
44A 18X19: RNCC: 5 | RNVC: 9

26 Jun 1991

5120-14-525-2660
Hand Terminal Crimping Tool

145252660
10453285: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-280-1422

5120-14-261-4514

5120-14-438-5064
Mise En Place Outil

144385064
J47980: RNCC: 3 | RNVC: 2
85-694-0781: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-217-3632
Montage Assemblage

142173632
NO PRIMARY REF14-217-3632: RNCC: 3 | RNVC: 2
156781: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-338-1638
Socket Head Screw Key Set

143381638
NO PRIMARY REF14-338-1638: RNCC: 3 | RNVC: 2
0126320: RNCC: 5 | RNVC: 2
86.JU6: RNCC: 5 | RNVC: 2
86JU6: RNCC: 5 | RNVC: 2

6 Nov 1976

5120-14-399-3735
Cone De Montage

143993735
100-480: RNCC: 3 | RNVC: 2
OUT100-480: RNCC: 5 | RNVC: 9

6 Mar 1985

5120-14-393-4131
Socket Head Screw Key

143934131
85-096: RNCC: 3 | RNVC: 2
3148511257906: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-450-5200
Torque Wrench Adapter

144505200
974706: RNCC: 3 | RNVC: 2
65-3-01EM3800-926226: RNCC: 5 | RNVC: 2
65-3-01EM3800-926226: RNCC: 5 | RNVC: 9
974706: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-442-5710
Open End Wrench

144425710
GS120-10X11: RNCC: 3 | RNVC: 2
1.70.1004: RNCC: 5 | RNVC: 2

22 Oct 1990

5120-14-539-9828
Socket Wrench Socket

145399828
OCE91-113D-1: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-322-9749
Spanner Wrench

143229749
121E95-151-00-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-200-4428
Socket Wrench Socket

142004428
S.9: RNCC: 3 | RNVC: 2
S-9: RNCC: 3 | RNVC: 2
S9: RNCC: 3 | RNVC: 2
162-0245: RNCC: 5 | RNVC: 2
0715 131 09: RNCC: 5 | RNVC: 2
3148510535104: RNCC: 5 | RNVC: 2
S9: RNCC: 5 | RNVC: 2
3272670276710: RNCC: 5 | RNVC: 2
0712 133 109: RNCC: 5 | RNVC: 2
0053510: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-400-4660
Screwdriver Bit

144004660
0007100: RNCC: 3 | RNVC: 2
AMC.S5,5: RNCC: 5 | RNVC: 2
AMC-S5,5: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-513-4112
Socket Head Screw Key

145134112
NO PRIMARY REF14-513-4112: RNCC: 3 | RNVC: 2
NNP 5120860464851: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-239-4157
Socket Wrench Extension

142394157
A10-93901000: RNCC: 3 | RNVC: 2
A10-93-901-00-0: RNCC: 5 | RNVC: 2
A10-93-901-00-0: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-245-1970
Equerre Nervuree Po

142451970
152-05: RNCC: 3 | RNVC: 2
5350-4: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-572-8545
Pole Extension

145728545
CE-3-24-C: RNCC: 3 | RNVC: 2

16 Aug 2012

5120-14-263-2692

5120-14-259-4787

5120-14-316-5853
Support Corps Therm

143165853
0S20989: RNCC: 3 | RNVC: 2
0MDS20989: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-433-6271
Socket Head Screw Key

144336271
6232-58518: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-256-8884
Spanner Wrench

142568884
761-4M952P1: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-300-9498
Trepied Verin

143009498
341A91-0055-10: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-317-0481
Pose Garniture

143170481
RT5846: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-429-0858
Compositiondouilles

144290858
0507350: RNCC: 3 | RNVC: 2
K.441E: RNCC: 5 | RNVC: 2
K441E: RNCC: 5 | RNVC: 2

10 Jan 1989

5120-14-241-0498
Poincon De Bourreli

142410498
964-3: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-241-1484
Cle A Ergots Specia

142411484
0684-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-406-0545
Cle Speciale Serrag

144060545
T 27: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-290-4519
Fourrure Adaptation

142904519
0FL: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-316-6663

5120-14-415-0672
Cle Speciale

5120-14-407-9976

5120-14-407-2749

5120-14-425-5988
Multiprise Pince

5120-14-403-6602

5120-14-383-3783
Open End Wrench

143833783
10-5X7-P: RNCC: 3 | RNVC: 2
3272670234482: RNCC: 5 | RNVC: 2
10-5X7P: RNCC: 5 | RNVC: 2
16401279-9: RNCC: 5 | RNVC: 2
10-5X7CP: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-512-3742
Spring Inserter And Remover

145123742
U.79-30: RNCC: 3 | RNVC: 2

10 Feb 1999

5120-14-345-1256
Socket Wrench Socket

143451256
312: RNCC: 3 | RNVC: 2
300-10-01: RNCC: 5 | RNVC: 2
312: RNCC: 5 | RNVC: 2

5 Oct 1977

5120-14-430-1006
Spanner Wrench

144301006
6814-58248: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-364-4744
Flat Tip Screwdriver

143644744
AGH6-5X250: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-460-0195
Socket Head Screw Key

144600195
120006-SERT-7055: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-14-288-6984
Spanner Wrench

142886984
D1553-4831: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-444-9294
Cross Tip Screwdriver

144449294
NO PRIMARY REF14-4449294: RNCC: 3 | RNVC: 2
1028589F00: RNCC: 5 | RNVC: 2
162-7561: RNCC: 5 | RNVC: 2
3148510040509: RNCC: 5 | RNVC: 2
ACP0X75: RNCC: 5 | RNVC: 2
ACP.0X75: RNCC: 5 | RNVC: 2
FACOMACP.0X75: RNCC: 5 | RNVC: 9
0004050: RNCC: 5 | RNVC: 9

29 Jan 1991

5120-14-414-0949
Spanner Wrench

144140949
R085-034-000B: RNCC: 3 | RNVC: 2
85-693-1564: RNCC: 6 | RNVC: 9

22 Jan 1987

5120-14-443-9906
Open End Wrench

144439906
GS125-13: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-332-3830
Face Spanner Wrench Socket

143323830
M31-052: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-287-5601
Hand Terminal Crimping Tool

142875601
8149-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-512-1243
Open End Wrench

145121243
446852: RNCC: 3 | RNVC: 2
446852-001: RNCC: 5 | RNVC: 9

4 Feb 1999

5120-14-040-7586
Outillage De Pose

140407586
JEUDEP0SEDURABLEBABY4 1-2: RNCC: 3 | RNVC: 2
DURABLEBABYJEUDEP0SE: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-461-2263
Outillage Ligne Pv

144612263
PL1DA002OR902000B: RNCC: 3 | RNVC: 2

3 Mar 1993

5120-14-435-7564
Outil Maintenance B

144357564
RP658262: RNCC: 3 | RNVC: 2
0882427N00: RNCC: 5 | RNVC: 2

22 Nov 1989

Load More Results