What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 92 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 92 of 110

5120-14-286-2596

5120-14-427-2226
Bearing And Bushing Inserter And Remover

144272226
46MS047-23: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-450-7484
Flat Tip Screwdriver

144507484
NO PRIMARY REF14-450-7484: RNCC: 3 | RNVC: 2
EM.5,5X100: RNCC: 5 | RNVC: 9
642050: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-572-5547
Seal Inserter

145725547
261233665: RNCC: 3 | RNVC: 2

12 Jul 2012

5120-14-561-5682
Screwdriver Bit Holder

145615682
CKS.95: RNCC: 3 | RNVC: 2
3148513416486: RNCC: 5 | RNVC: 2

29 Jul 2009

5120-14-483-6070
Extracteur

144836070
6803G32-2145-02: RNCC: 3 | RNVC: 2

24 Sep 1996

5120-14-309-7438
Mechanical Puller Attachment

143097438
341A93-3519-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-369-1253
Wrench Extension Handle

143691253
M24-046: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-296-8164
Socket Head Screw Key

142968164
260-75-14-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-448-9162
Finger Tip Socket Wrench Set

144489162
600-917-70-03: RNCC: 3 | RNVC: 2

24 Jul 1991

5120-14-517-3780
Bearing Staking Installation Tool

145173780
0XB101-244-700-24: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-340-9182
Spanner Wrench

143409182
3210-95-32-095: RNCC: 3 | RNVC: 2
85-653-6400: RNCC: 6 | RNVC: 9

14 Feb 1977

5120-14-365-8759
Combination Box And Open End Wrench

143658759
40.34L: RNCC: 3 | RNVC: 2
3148511011553: RNCC: 5 | RNVC: 2
40-34: RNCC: 5 | RNVC: 2
40-34L: RNCC: 5 | RNVC: 2
CAE00877: RNCC: 5 | RNVC: 2
0101155: RNCC: 5 | RNVC: 9

8 Oct 1980

5120-14-352-7145
Open End Wrench

143527145
45.46: RNCC: 3 | RNVC: 2
3148511052006: RNCC: 5 | RNVC: 2
45-46: RNCC: 5 | RNVC: 2
1105433R00: RNCC: 5 | RNVC: 2
M4ZS460D8103: RNCC: 5 | RNVC: 2
91467037: RNCC: 5 | RNVC: 2
0105200: RNCC: 5 | RNVC: 9

14 Nov 1978

5120-14-382-8550
Reglage Cle

143828550
9970-121-189: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-491-8588
Cle Demonte-

144918588
PAA51-17: RNCC: 3 | RNVC: 2
F300 0T 005 7147: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-212-9166
Cle Speciale Correc

142129166
9970-115-243: RNCC: 3 | RNVC: 2
9970-115-243-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-525-9884
Screwdriver Bit Set And Handle

145259884
DM.635: RNCC: 3 | RNVC: 2

25 Jun 2001

5120-14-286-7310
Manual Impact Wrench

142867310
0509400: RNCC: 3 | RNVC: 2
NG.300: RNCC: 5 | RNVC: 2
NG300: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-264-6356
Blacksmith's Punch

142646356
3833-30: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-255-6742
Embout Positionneur

142556742
809722: RNCC: 3 | RNVC: 2
85-800-4794: RNCC: 6 | RNVC: 9
00-104-1977: RNCC: 6 | RNVC: 9

1 Jan 1969

5120-14-214-9318
Bague Blocage Et De

142149318
60290-02-00-080M1: RNCC: 3 | RNVC: 2
9970-143-089: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-455-2583
Sheet Holder Forceps

144552583
NK2-30-60: RNCC: 3 | RNVC: 2

20 May 1992

5120-14-406-6573
Fixation Support

144066573
853-200-850-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-527-9156
Screwdriver Bit

145279156
888-498-000-2: RNCC: 3 | RNVC: 2
888-498-000-1: RNCC: 5 | RNVC: 2

28 Nov 2001

5120-14-490-8825
Griffe

144908825
4066 307 000 100: RNCC: 3 | RNVC: 2
F300 0T 000 5097: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-515-1506
Socket Wrench Screwdriver Attachment

145151506
ENFD6519-D27X85: RNCC: 3 | RNVC: 2
ENFD6519D27X85: RNCC: 3 | RNVC: 2

8 Jul 1999

5120-14-479-4600
Seal Inserter And Remover

144794600
70040737: RNCC: 3 | RNVC: 2
F109962A: RNCC: 5 | RNVC: 2
GD410411900VARIANTE00: RNCC: 5 | RNVC: 2
RAR1943: RNCC: 5 | RNVC: 2
49689203: RNCC: 5 | RNVC: 2
70010737: RNCC: 5 | RNVC: 2

12 Jan 1996

5120-14-491-0246
Serre J

144910246
4602 013 300 006: RNCC: 3 | RNVC: 2
F300 0T 001 1043: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-562-6477
Wrench Kit

145626477
J.401AVSE: RNCC: 3 | RNVC: 2
3148510291161: RNCC: 5 | RNVC: 2

10 Nov 2009

5120-14-214-9916
Cle Speciale

142149916
204808: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-268-8606

5120-14-546-9219
Detent Handling Tool

145469219
GAFLSL0500A: RNCC: 3 | RNVC: 2
SYQ-6038: RNCC: 5 | RNVC: 2

7 Sep 2005

5120-14-454-5293
Screwdriver Handle

144545293
31315-EB4: RNCC: 3 | RNVC: 2
91472462: RNCC: 5 | RNVC: 2

2 Apr 1992

5120-14-382-7235
Graissage Montage

143827235
MF012-21-00: RNCC: 3 | RNVC: 2
MF012-21-00: RNCC: 5 | RNVC: 2
85-692-1832: RNCC: 6 | RNVC: 9

17 Feb 1983

5120-14-432-1244
Extraction Cloche

144321244
853-202-815-0: RNCC: 3 | RNVC: 2

24 May 1989

5120-14-454-9409
Socket Head Screw Key

144549409
84E.2,5X75: RNCC: 3 | RNVC: 2
243-948: RNCC: 5 | RNVC: 2
3148511254080: RNCC: 5 | RNVC: 2
FACOM84E.2,5X75: RNCC: 5 | RNVC: 9
0125408: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-459-3423
Solid Center Punch Set

144593423
247.265JT10: RNCC: 3 | RNVC: 2
247-265JT10: RNCC: 5 | RNVC: 2
3148515389054: RNCC: 5 | RNVC: 2
0538905: RNCC: 5 | RNVC: 9

26 Nov 1992

5120-14-405-4529
Appui Arrache Joint

144054529
0-701829-2-1: RNCC: 3 | RNVC: 2
85-693-1473: RNCC: 6 | RNVC: 9

27 Nov 1985

5120-14-333-4298
Socket Head Screw Key

143334298
824376: RNCC: 3 | RNVC: 2
824376: RNCC: 5 | RNVC: 9
85-688-9664: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-426-7300
Fausse Crosse

144267300
33431-02-532: RNCC: 2 | RNVC: 2

17 Sep 1988

5120-14-252-5613
Socket Wrench Socket

142525613
R9: RNCC: 3 | RNVC: 2
9970-115-321: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-513-9723
Open End Wrench

145139723
ENFD29159-4X6: RNCC: 3 | RNVC: 2

21 Apr 1999

5120-14-514-8404
Cross Tip Screwdriver

145148404
ENFD6569-2X100: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-404-9896
Electrical Contact Inserter

144049896
8500-01: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-479-3543
Cross Tip Screwdriver

144793543
AZP.3X150: RNCC: 3 | RNVC: 2
1091082K00: RNCC: 5 | RNVC: 2
250-5822: RNCC: 5 | RNVC: 2
W269301000045: RNCC: 5 | RNVC: 2
3148510134529: RNCC: 5 | RNVC: 2
AZP-3X150: RNCC: 5 | RNVC: 2
FACOMAZP.3X150: RNCC: 5 | RNVC: 9
0013452: RNCC: 5 | RNVC: 9

10 Jan 1996

5120-14-430-1003
Spanner Wrench

144301003
6814-58215: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-226-3736
Spanner Wrench

142263736
482: RNCC: 3 | RNVC: 2
85-658-2520: RNCC: 6 | RNVC: 9

1 Jan 1966

5120-14-386-1556
Socle Maintie Ecrou

143861556
6801J32-3026-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-231-7797
Craftsman's Tweezers

142317797
NO PRIMARY REF14-231-7797: RNCC: 3 | RNVC: 2
1728: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-232-6812
Socket Wrench Handle

142326812
S120: RNCC: 3 | RNVC: 2
V2-95-009: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-286-2230
Open End Wrench

142862230
20.12: RNCC: 3 | RNVC: 2
20-12: RNCC: 5 | RNVC: 2
3148510935201: RNCC: 5 | RNVC: 2
0093520: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-463-9877
Open End Wrench

144639877
REMDCHEGZLE-SERT-6497-120002-: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-250-9831
Offset Screwdriver

142509831
9970-115-022: RNCC: 3 | RNVC: 2
171-215: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-276-3236
Swivel Knob Jeweler's Screwdriver

142763236
NO PRIMARY REF14-276-3236: RNCC: 3 | RNVC: 2
C0PSAT1875L10SAT1875N: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-514-3866
Screwdriver Bit

145143866
ENFD6526AC1-2X8: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-404-0148
Bearing And Bushing Inserter

144040148
350A93-3706-21: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-209-5134
Rallonge Pour Embou

142095134
M6-088: RNCC: 3 | RNVC: 2
M6-088: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-445-2531
Valve Tappet Adjusting Tool

144452531
M0T647-00: RNCC: 3 | RNVC: 2

6 Feb 1991

5120-14-444-3177
Combination Box And Open End Wrench

144443177
GS130-18: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-445-9083
Socket Wrench Socket

144459083
NO PRIMARY REF14-445-9083: RNCC: 3 | RNVC: 2
89415331: RNCC: 5 | RNVC: 2
120080: RNCC: 5 | RNVC: 9

27 Feb 1991

5120-14-210-9880
Open End Wrench

142109880
33-29X31: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-444-2718
Flat Tip Screwdriver

144442718
NO PRIMARY REF14-444-2718: RNCC: 3 | RNVC: 2
GS210-06: RNCC: 5 | RNVC: 9

21 Dec 1990

5120-14-406-5697
Montage Outil

144065697
853-200-753-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-541-7060
Combination Box And Open End Wrench

145417060
40R.12: RNCC: 3 | RNVC: 2
3148511011843: RNCC: 5 | RNVC: 2
40R.12: RNCC: 5 | RNVC: 2

22 Jun 2004

5120-14-458-4933
Seal Inserter And Remover

144584933
549084: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-430-3441
Mechanical Puller Adapter

144303441
RT17040: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-361-8474
Socket Wrench Socket

143618474
8812946000: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-223-8240
Spanner Wrench

142238240
939BISBV6: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-567-5700
Open End Wrench

145675700
260742326: RNCC: 3 | RNVC: 2

25 Mar 2011

5120-14-393-9690
Hand Terminal Crimping Tool

143939690
282291: RNCC: 3 | RNVC: 2
R282291: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-256-0763
Rotating Members Aligning Tool

142560763
850.261.108: RNCC: 3 | RNVC: 2
STUBS5-8 300: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-423-1870
Retaining Ring Pliers

144231870
190-28: RNCC: 3 | RNVC: 2
3272670290419: RNCC: 5 | RNVC: 2
99-250-70-048-1: RNCC: 5 | RNVC: 2
99250700481: RNCC: 5 | RNVC: 2
190.28: RNCC: 5 | RNVC: 2

7 Apr 1988

5120-14-274-8326
Blacksmith's Anvil

142748326
13-27-250KG: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-412-9788
Open End Wrench

144129788
853-100-233-0: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-399-2081
Socket Head Screw Key

143992081
63-3-32: RNCC: 3 | RNVC: 2
63-3/32: RNCC: 3 | RNVC: 2
3272670285910: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-552-8260
Spanner Wrench

145528260
4041566-AMF-764: RNCC: 3 | RNVC: 2

6 Feb 2007

5120-14-352-3202
Outil De Freinage

143523202
MMT0510201: RNCC: 3 | RNVC: 2
MMT051-02: RNCC: 5 | RNVC: 2
MMT051-02-01: RNCC: 5 | RNVC: 2
MMT051-02-01: RNCC: 5 | RNVC: 2
MMT0510201: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-567-9618
Electrical Connector Inserter

145679618
261102357: RNCC: 3 | RNVC: 2

28 Apr 2011

5120-14-241-1545
Cle A Ergots Specia

142411545
0843-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-473-2494
Socket Head Screw Key

144732494
82H.2,5: RNCC: 3 | RNVC: 2
3148511230213: RNCC: 5 | RNVC: 2
0110668Q00: RNCC: 5 | RNVC: 2
82H.2,5: RNCC: 5 | RNVC: 2
91777996: RNCC: 5 | RNVC: 2
235-2870: RNCC: 5 | RNVC: 2
0715 31 37: RNCC: 5 | RNVC: 2
FACOM82H.2,5: RNCC: 5 | RNVC: 9
0123021: RNCC: 5 | RNVC: 9

9 Dec 1994

5120-14-031-9726
Degomm Clapet Outil

140319726
MS504-1: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-339-0134

5120-14-562-5227
Hand Terminal Crimping Tool

145625227
673838: RNCC: 3 | RNVC: 2
3148516738387: RNCC: 5 | RNVC: 2

2 Nov 2009

5120-14-493-6128
Cle

144936128
702601: RNCC: 3 | RNVC: 2
F300 0T 013 9161: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-255-6571

5120-14-457-9999
Appareil De Montage

144579999
NO PRIMARY REF14-457-9999: RNCC: 3 | RNVC: 2
307-C26066-7: RNCC: 5 | RNVC: 9
307-C26066-7: RNCC: 5 | RNVC: 9

2 Oct 1992

5120-14-224-0723
Cle Speciale

142240723
80900-380: RNCC: 3 | RNVC: 2
79400-6: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-335-1564
Spanner Wrench

143351564
NO PRIMARY REF14-335-1564: RNCC: 3 | RNVC: 2
Z31473D: RNCC: 5 | RNVC: 9

3 Jun 1976

5120-14-517-3778
Bearing Staking Installation Tool

145173778
0XB101-244-700-17: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-477-5028
Combination Box And Open End Wrench

144775028
41.17: RNCC: 3 | RNVC: 2
0184650L00: RNCC: 5 | RNVC: 2
41-17: RNCC: 5 | RNVC: 2
3148511013649: RNCC: 5 | RNVC: 2
39511930: RNCC: 5 | RNVC: 2
247-9802: RNCC: 5 | RNVC: 2
0101364: RNCC: 5 | RNVC: 9

7 Sep 1995

5120-14-350-0282
Mechanical Puller Attachment

143500282
3130S98-04-602: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-485-7345
Mechanical Puller Attachment

144857345
332A93-3685-10: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-514-3802
Hand Armament Subsystem Carrier

145143802
177E698-00: RNCC: 3 | RNVC: 2
177E698-00: RNCC: 5 | RNVC: 9

19 May 1999

5120-14-327-4638
Open End Wrench

143274638
MAT196-0066F10: RNCC: 3 | RNVC: 2
MAT196-1234F9: RNCC: 3 | RNVC: 2
1872-17: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-322-7757
Open End Wrench

143227757
44-19X24: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-472-7956
Cle Mixte

144727956
0408-2035: RNCC: 3 | RNVC: 2
SAF0408-2035: RNCC: 5 | RNVC: 9

9 Nov 1994

5120-14-319-4060
Pliers

143194060
P108: RNCC: 3 | RNVC: 9
01417338: RNCC: 5 | RNVC: 2
91387766: RNCC: 5 | RNVC: 2
85-635-3550: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-420-7217
Pince Cloche

144207217
6224-58357: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-400-8117
Open End Wrench

144008117
321A96-0034-00: RNCC: 3 | RNVC: 2
321.96.0034-00: RNCC: 5 | RNVC: 2

21 May 1985

5120-14-460-0193
Flat Tip Screwdriver

144600193
120012-SERT-7053: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-14-311-7468
Mordache Pour Colle

143117468
6800-1064: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-499-6704
Cle

144996704
E03-4373: RNCC: 3 | RNVC: 2
F300 0T 023 6525: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-364-2746
Guide Pompe Hydraul

143642746
0U119430: RNCC: 3 | RNVC: 2
0U119430: RNCC: 5 | RNVC: 9
85-691-3068: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-317-0555
Patin Frein Verin

143170555
160-888427-11: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-514-3592
Tire Bourre

145143592
NO PRIMARY REF14-514-3592: RNCC: 3 | RNVC: 2
41T3303-12-5/16: RNCC: 5 | RNVC: 2
NNP5120860757259: RNCC: 5 | RNVC: 2
41T3303-12-5/16: RNCC: 5 | RNVC: 9

12 May 1999

5120-14-306-3496
Open End Wrench

143063496
10-21X23CM: RNCC: 3 | RNVC: 2
85-800-5594: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-307-6750
Spanner Wrench

143076750
6800-2198: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-501-0229
Socket Head Screw Key

145010229
83SH.1,5: RNCC: 3 | RNVC: 2
83SH1-5: RNCC: 5 | RNVC: 2
3148511238011: RNCC: 5 | RNVC: 2
83SH-1-5: RNCC: 5 | RNVC: 2
235-2713: RNCC: 5 | RNVC: 2
0715 311 46: RNCC: 5 | RNVC: 2
FACOM83SH.1-5: RNCC: 5 | RNVC: 9
F300 0T 025 0527: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-416-5684
Swivel Knob Jeweler's Screwdriver Set

144165684
HB.4: RNCC: 3 | RNVC: 2
3148510270562: RNCC: 5 | RNVC: 2
91719686: RNCC: 5 | RNVC: 2
243-291: RNCC: 5 | RNVC: 2
HB4: RNCC: 5 | RNVC: 2
0027056: RNCC: 5 | RNVC: 9
FACOMHB.4: RNCC: 5 | RNVC: 9
85-693-5614: RNCC: 6 | RNVC: 9

18 Jun 1987

5120-14-322-5413
Slugging Type Box Wrench Socket

143225413
50-43: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-373-0027
Electrical Card Extractor

143730027
21302978: RNCC: 3 | RNVC: 2
85-691-7982: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-411-2084
Spanner Wrench

144112084
121-411-01W26H: RNCC: 3 | RNVC: 2
121-411-01-W26H: RNCC: 5 | RNVC: 2
85-692-5401: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-441-2288
Bearing And Bushing Inserter And Remover

144412288
6803V32-2120-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-311-2976
Machoire Tendeur A

143112976
0350-412: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-468-9669
Reparation Mole Lot

144689669
113.10-3: RNCC: 3 | RNVC: 2
3148511329405: RNCC: 5 | RNVC: 2
0132940: RNCC: 5 | RNVC: 9

30 Mar 1994

5120-14-422-2208
Spanner Wrench

144222208
0496-238000: RNCC: 3 | RNVC: 2
O496-238000: RNCC: 5 | RNVC: 2

24 Feb 1988

5120-14-040-1995
Open End Wrench

140401995
NO PRIMARY REF14-040-1995: RNCC: 3 | RNVC: 2
BL43936: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-325-4352

5120-14-313-9202
Jeu De Pose Oeillet

143139202
NO PRIMARY REF14-313-9202: RNCC: 3 | RNVC: 2
210JEUDEP0SE: RNCC: 5 | RNVC: 9
RECH0VALE210: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-202-6027
Flat Tip Screwdriver

142026027
NO PRIMARY REF14-202-6027: RNCC: 3 | RNVC: 2
2229-8-500: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-213-1984
Open End Wrench

142131984
253-5M945-3: RNCC: 3 | RNVC: 2
RU253-5M945-3: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-321-1491
Pliers

143211491
46-8: RNCC: 3 | RNVC: 2
85-681-3851: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-435-0678
Torque Wrench Adapter

144350678
853-100-226-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-409-9076
Socket Head Screw Key Set

144099076
85.JU10: RNCC: 3 | RNVC: 2
3148515329005: RNCC: 5 | RNVC: 2
85JU10: RNCC: 5 | RNVC: 2
85-JU10: RNCC: 5 | RNVC: 2
0532900: RNCC: 5 | RNVC: 9

4 Jun 1986

5120-14-401-4253

5120-14-406-5679
Demontage Outil

144065679
853-200-722-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-490-6987
Vise

144906987
241 V 00250 000: RNCC: 3 | RNVC: 2
F300 0T 000 1165: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-434-7874
Sheet Metalworking Stake

144347874
853-670-048-0: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-14-487-5735
Open End Wrench

144875735
K7739-12108-11/16BSX3/4BS: RNCC: 3 | RNVC: 2
K7739-12108-5/8WX11/16W: RNCC: 3 | RNVC: 2
12108-5/8WX11/16W: RNCC: 5 | RNVC: 2
12108-11/16BSX3/4BS: RNCC: 5 | RNVC: 2

10 Apr 1997

5120-14-212-9566
Masse Deux Pieces D

142129566
NO PRIMARY REF14-212-9566: RNCC: 3 | RNVC: 2
156477: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-324-1929
Chasse-Guide Soupap

143241929
7-010373-6: RNCC: 3 | RNVC: 2
RAB2167: RNCC: 5 | RNVC: 2
0UT2770: RNCC: 5 | RNVC: 9
7-010373-6: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-274-0829
Socket Head Screw Key

142740829
NO PRIMARY REF14-274-0829: RNCC: 3 | RNVC: 2
0124060: RNCC: 5 | RNVC: 2
83-6: RNCC: 5 | RNVC: 2
83.6: RNCC: 5 | RNVC: 2
18509477-3: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-569-3092
Leveling-Support Jack Set

145693092
305525: RNCC: 3 | RNVC: 2
LV.A-100-24-M16X98: RNCC: 3 | RNVC: 2

2 Sep 2011

5120-14-250-2023
Socket Head Screw Key

142502023
2G104033AREP1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-511-6685
Open End Wrench

145116685
NNP5120878750503: RNCC: 3 | RNVC: 2

8 Jan 1999

5120-14-425-9298
Open End Wrench

144259298
600208: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-289-7495
Electronic Component Inserter And Remover

142897495
15025160: RNCC: 3 | RNVC: 2

5 May 2004

5120-14-459-3269
Spanner Wrench

144593269
OS22698: RNCC: 3 | RNVC: 2
OS22698: RNCC: 5 | RNVC: 9

25 Nov 1992

5120-14-525-5668
Combination Box And Open End Wrench

145255668
40R.13: RNCC: 3 | RNVC: 2
1119974A00: RNCC: 5 | RNVC: 2
40R.13: RNCC: 5 | RNVC: 2

14 Jun 2001

5120-14-246-4404
Open End Wrench

142464404
NO PRIMARY REF14-246-4404: RNCC: 3 | RNVC: 2
F1760: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-304-4033
Spanner Wrench

143044033
TMY20-27-402: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-363-5004
Spanner Wrench

143635004
2310-03442: RNCC: 3 | RNVC: 2

9 May 1980

5120-14-301-0977
Bearing Staking Installation Tool

143010977
330A98-3431-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-378-5544
Spanner Wrench

143785544
6804J33-4007-00: RNCC: 3 | RNVC: 2
6804360A33-4007-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-244-9007
Open End Wrench

142449007
10NC14X17: RNCC: 3 | RNVC: 2
44S14X17: RNCC: 5 | RNVC: 2
10-14X17C: RNCC: 5 | RNVC: 2
130339: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-514-7326
Cross Tip Screwdriver

145147326
ENFD6568-2X150: RNCC: 3 | RNVC: 2

11 Jun 1999

5120-14-428-5553
De Pose Mandrin

144285553
SF0-99: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-544-2608
Verin Cale

145442608
22355-228: RNCC: 3 | RNVC: 2

13 Jan 2005

5120-14-306-5979
Electrical Contact Inserter

143065979
00113230260: RNCC: 3 | RNVC: 2
1132-16: RNCC: 5 | RNVC: 2
1132-302-60: RNCC: 5 | RNVC: 2
91573092: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-367-2190
Spanner Wrench

143672190
F46161: RNCC: 3 | RNVC: 2
85-691-2206: RNCC: 6 | RNVC: 9

11 Dec 1980

5120-14-514-0123
Open End Wrench

145140123
ENFD29159-18X21: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-570-7637
Detent Handling Tool

145707637
62534812AA: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-407-2762

5120-14-418-0355

5120-14-259-4695
Outil De Manutentio

142594695
8500-38: RNCC: 3 | RNVC: 2
8500-38: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-290-7687
Guide

142907687
2320-03659MIL700: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-530-2019
Socket Wrench Socket

145302019
S.13/16LA: RNCC: 3 | RNVC: 2
00.49.25.75: RNCC: 5 | RNVC: 2
3148510557656: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-409-1899
Cle Tubulaire

144091899
2-26082: RNCC: 3 | RNVC: 2

25 Apr 1986

5120-14-477-5029
Socket Wrench Socket

144775029
K.35LA: RNCC: 3 | RNVC: 2
3148510302355: RNCC: 5 | RNVC: 2
K35LA: RNCC: 5 | RNVC: 2
0197317C00: RNCC: 5 | RNVC: 2
0030235: RNCC: 5 | RNVC: 9

7 Sep 1995

5120-14-446-8982
Torque Wrench Adapter

144468982
11.17: RNCC: 3 | RNVC: 2
11-17: RNCC: 5 | RNVC: 2
3148510927008: RNCC: 5 | RNVC: 2
91629351: RNCC: 5 | RNVC: 2
0092700: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-270-5204
Cle Pour Aiguillot

142705204
0960-45-77-16412DET2: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-530-2026
Socket Wrench Socket

145302026
R.9/16E: RNCC: 3 | RNVC: 2
00.44.04.39: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-488-3111
Socket Head Screw Key

144883111
82H.1/8: RNCC: 3 | RNVC: 2
0123501: RNCC: 5 | RNVC: 2
3148511235010: RNCC: 5 | RNVC: 2
82H1-8: RNCC: 5 | RNVC: 2
0715 311 29: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-555-9355
Body And Fender Repair Pick

145559355
875.2: RNCC: 3 | RNVC: 9
3148512099307: RNCC: 5 | RNVC: 9

10 Jan 2008

5120-14-301-6886
Rotating Members Aligning Tool

143016886
8-394EQ: RNCC: 3 | RNVC: 9
8-394EQ: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-384-1843
Faux-Mors Jeu

143841843
26-281: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-369-1877
Mechanical Puller Attachment

143691877
365A93-4146-10: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-438-6836
Projectile Holding Tool

144386836
321A95-0034-20: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-14-332-0446
Jeu Biellettes

143320446
9070-110: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-412-9857
Extracteur Manche

144129857
853-202-476-0: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-292-7770

5120-14-449-6824
Spanner Wrench

144496824
OUT-28MS17: RNCC: 3 | RNVC: 2

2 Sep 1991

5120-14-378-5557
Bearing And Bushing Inserter

143785557
6808J33-4008-00: RNCC: 3 | RNVC: 2
6808360A33-4008-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-440-5360
Montage Guide

144405360
0S22953: RNCC: 3 | RNVC: 2
85-694-1145: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-440-5432
Cle

144405432
51990: RNCC: 3 | RNVC: 2
85-694-1117: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-489-5112
Demie Machoire

144895112
10296510: RNCC: 3 | RNVC: 2

30 Jul 1997

5120-14-513-0870
Final Drive Assembly Alignment Pin

145130870
800815191: RNCC: 3 | RNVC: 2

3 Mar 1999

5120-14-269-4383
Hand Fire Shovel

142694383
NO PRIMARY REF14-269-4383: RNCC: 3 | RNVC: 2
BT38F0UGAPELLEABRAISE: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-391-8681
Demontage Outillage

143918681
46AM001: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-447-6898
Grommet Inserting Punch And Die

144476898
MATRICEDOEILLETDEBOULEK104: RNCC: 3 | RNVC: 2
MATRICEDOEILLETDEBOULEK104: RNCC: 5 | RNVC: 9
85-694-4264: RNCC: 6 | RNVC: 9

29 May 1991

5120-14-316-6643

5120-14-255-1966

5120-14-237-4724
Broche De Combinate

142374724
3130-95-90-021: RNCC: 3 | RNVC: 2
3130S95-90-021: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-425-5990
Socket Wrench Socket

144255990
NS.7/16: RNCC: 3 | RNVC: 2
3148510424200: RNCC: 5 | RNVC: 2
0042420: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-405-4088

5120-14-363-2197
Tas Demmanchement E

143632197
3160S95-63-018-1: RNCC: 3 | RNVC: 2
GPLV87-30: RNCC: 5 | RNVC: 2
85-689-8105: RNCC: 6 | RNVC: 9

3 Apr 1980

5120-14-439-6211
Spanner Wrench

144396211
6801G31-1432-20: RNCC: 3 | RNVC: 2
6801332A-31-1432-20: RNCC: 5 | RNVC: 2

16 May 1990

5120-14-573-5505
Hand Vise Jaw

145735505
484-3817: RNCC: 3 | RNVC: 2

22 Oct 2012

5120-14-567-0991
Open End Wrench

145670991
467.17: RNCC: 3 | RNVC: 2
3148518196499: RNCC: 5 | RNVC: 2

7 Feb 2011

5120-14-315-1872
Mechanical Puller Attachment

143151872
0-65051-4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-404-1195
Extraction Poussoir

144041195
09P714: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-253-9550
Extracteur Special

142539550
DLT070879: RNCC: 3 | RNVC: 2
DLT070879: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-241-0283

5120-14-467-1319
Obus De Valve Cle

144671319
MHN107-42: RNCC: 3 | RNVC: 2

16 Dec 1993

5120-14-517-9947
Six Point Tip Screwdriver

145179947
ENFD6577-27X100: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-208-9850
Open End Wrench

142089850
70-22X24: RNCC: 3 | RNVC: 2
3272670264847: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-528-9284
Wire Twister Pliers

145289284
445.10G: RNCC: 3 | RNVC: 2
3148511764503: RNCC: 5 | RNVC: 2

25 Feb 2002

5120-14-357-4331
Retaining Ring Pliers

143574331
469.PA: RNCC: 3 | RNVC: 2
3148511777008: RNCC: 5 | RNVC: 2
469PA: RNCC: 5 | RNVC: 2
0177700: RNCC: 5 | RNVC: 9
469P: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-436-4625
Socket Wrench Adapter

144364625
09P849: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-539-9831
Socket Wrench Socket

145399831
OCE91-113G-1: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-399-7547
Boiler Tube Wire Brush

143997547
4-444-00P05-02R: RNCC: 3 | RNVC: 2

14 Mar 1985

5120-14-410-3672
Screwdriver Bit

144103672
EX.110: RNCC: 3 | RNVC: 2
EX110: RNCC: 5 | RNVC: 2
3148510258003: RNCC: 5 | RNVC: 2
1059126M00: RNCC: 5 | RNVC: 2
162-7690: RNCC: 5 | RNVC: 2
0614 311 0: RNCC: 5 | RNVC: 2
2695 710: RNCC: 5 | RNVC: 2
0025800: RNCC: 5 | RNVC: 9
FACOMEX.110: RNCC: 5 | RNVC: 9

18 Jun 1986

5120-14-417-4888
Face Spanner Wrench Socket

144174888
705734-00: RNCC: 3 | RNVC: 2

8 Jul 1987

5120-14-338-9084
Spanner Wrench

143389084
NO PRIMARY REF14-338-9084: RNCC: 3 | RNVC: 2
154799: RNCC: 5 | RNVC: 9

17 Dec 1976

5120-14-391-8606
Spanner Wrench

143918606
704322-00: RNCC: 3 | RNVC: 2
704-322-00: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-515-1503
Socket Wrench Screwdriver Attachment

145151503
ENFD6519-D21X85: RNCC: 3 | RNVC: 2
ENFD6519D21X85: RNCC: 3 | RNVC: 2

8 Jul 1999

5120-14-235-7177
Spanner Wrench

142357177
NO PRIMARY REF14-235-7177: RNCC: 3 | RNVC: 2
1148: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-288-1568
Cle Reservoir

142881568
M24-003: RNCC: 3 | RNVC: 2
M24-003: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-334-2127
Spanner Wrench

143342127
BR4X533: RNCC: 3 | RNVC: 2
4X533: RNCC: 5 | RNVC: 2
85-100-4941: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-241-0915
Outillage Serrage E

142410915
MS444-20: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-420-9555
Hand Tube Belling Punch

144209555
NO PRIMARY REF14-420-9555: RNCC: 3 | RNVC: 2
243.A5/16: RNCC: 5 | RNVC: 2

6 Jan 1988

5120-14-385-3142
Open End Wrench

143853142
360A93-3305-21: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-233-4344
Cle Speciale Douill

142334344
9970-111-022: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-479-9468
Face Spanner Wrench Socket

144799468
888-358-400-1: RNCC: 3 | RNVC: 2

14 Feb 1996

5120-14-530-2107
Socket Wrench Socket

145302107
51074: RNCC: 3 | RNVC: 2
R.1/2E: RNCC: 3 | RNVC: 2
3148510510743: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-220-1443
Trousse Outillage S

142201443
78812: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-372-5991
Hand Terminal Crimping Tool

143725991
1-476400-1: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-031-9695
Support Monta Outil

140319695
MH0672100: RNCC: 3 | RNVC: 2
MH0672100: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-490-9295
Clef

144909295
4182 795 612 802: RNCC: 3 | RNVC: 2
F300 0T 000 6624: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-245-1831

5120-14-549-7119
Face Spanner Wrench Socket

145497119
270M538-00: RNCC: 3 | RNVC: 2

2 May 2006

5120-14-438-0868
Bearing And Bushing Inserter And Remover

144380868
NO PRIMARY REF14-438-0868: RNCC: 3 | RNVC: 2
287151: RNCC: 5 | RNVC: 9
287151: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-14-229-2674
Jauge Pour Le Contr

142292674
VTR250-1048: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-389-2185
Open End Wrench

143892185
M34013: RNCC: 3 | RNVC: 2
85-692-3942: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-400-3857
Canon De Guidage

144003857
14864J: RNCC: 3 | RNVC: 2
85-692-6986: RNCC: 6 | RNVC: 9

24 Apr 1985

5120-14-544-7939
Socket Wrench Screwdriver Attachment Set

145447939
R.402: RNCC: 3 | RNVC: 2

24 Feb 2005

5120-14-434-3552
Open End Wrench

144343552
M4DZ7101906701: RNCC: 3 | RNVC: 2

20 Sep 1989

5120-14-392-0986
Mechanical Puller Attachment

143920986
8810572104: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-468-7086
Socket Wrench Screwdriver Attachment

144687086
0514460: RNCC: 3 | RNVC: 2
3148515144608: RNCC: 5 | RNVC: 2
RX.30: RNCC: 5 | RNVC: 2
RX30: RNCC: 5 | RNVC: 2

16 Mar 1994

5120-14-399-7513
Socket Head Screw Key Blade

143997513
M4Z7101909304: RNCC: 3 | RNVC: 2
M4Z7101909302: RNCC: 5 | RNVC: 2

14 Mar 1985

5120-14-491-0139
Cle

144910139
4602 007 200 072: RNCC: 3 | RNVC: 2
F300 0T 001 0925: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-494-1423
Filtre

144941423
88210500: RNCC: 3 | RNVC: 2
F300 0T 015 7215: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-041-8326
Female Electrical Contact Resizing Tool

140418326
DF92-302-61: RNCC: 3 | RNVC: 2
9DF92-302-61: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-378-8447
Outil Dextraction

143788447
UGB233-49: RNCC: 3 | RNVC: 2
UGB233-49: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-567-4566
Mechanical Puller

145674566
8818836200: RNCC: 3 | RNVC: 2

17 Mar 2011

5120-14-326-0240
Spanner Wrench

143260240
3511 961 02981: RNCC: 3 | RNVC: 2
3511-961-02981: RNCC: 5 | RNVC: 2
MQ10298: RNCC: 5 | RNVC: 2
85-681-7410: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-276-3384
Clapet A Pedoncule

142763384
NO PRIMARY REF14-276-3384: RNCC: 3 | RNVC: 2
6G01-061A15: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-392-0879

5120-14-217-2670

5120-14-549-7103
Face Spanner Wrench Socket

145497103
270M115-00: RNCC: 3 | RNVC: 2

2 May 2006

5120-14-332-0447
Jeu Biellettes

143320447
9070-111: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-377-2796
Ensemble Extracteur

143772796
TMY20-32-316: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-476-3052
Pose-Guide Soupape

144763052
9995028: RNCC: 3 | RNVC: 2
RAB3867: RNCC: 5 | RNVC: 2
9995028: RNCC: 5 | RNVC: 9

6 Jun 1995

5120-14-241-0265
Cle Montage Des Arb

142410265
202433: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-464-2483
De Riveta Outillage

144642483
854-500-396-0: RNCC: 3 | RNVC: 2

28 Jul 1993

5120-14-521-7613
Cle A Crenaux

145217613
2P84540-00: RNCC: 3 | RNVC: 2

13 Sep 2000

5120-14-317-0272
Blocage Embout Cle

143170272
G1-15-045: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-391-6578
Support Comparateur

143916578
70-115-569: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-338-4779
Faux Mor Demi-Coqui

143384779
C46346-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-531-7730
Flat Tip Screwdriver

145317730
AZ.6,5X400: RNCC: 3 | RNVC: 2

18 Sep 2002

5120-14-509-3551

5120-14-444-3212

5120-14-536-3235
C Outil De Montage

145363235
TP00.005: RNCC: 3 | RNVC: 2

29 Jul 2003

5120-14-241-1487
Cle A Ergots Specia

142411487
0687-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-204-4575

5120-14-231-9962
Mandrin Special

142319962
DEL: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-383-0950
Cont Deformat Regle

143830950
9970-131-177: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-526-0467
Spanner Wrench

145260467
ST159-2M112-1A13: RNCC: 3 | RNVC: 2

28 Jun 2001

5120-14-214-1376
Semelle

142141376
611-314-03: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-444-3178
Combination Box And Open End Wrench

144443178
GS130-17: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-219-4341

5120-14-297-4258

5120-14-401-8566
Appareil Rodage

144018566
25545903500: RNCC: 3 | RNVC: 2
255459035: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-490-8914
Pince

144908914
4067 230 000 590: RNCC: 3 | RNVC: 2
F300 0T 000 5189: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-503-3007
Cle Arriere

145033007
622397730: RNCC: 3 | RNVC: 2

9 Jan 1998

5120-14-427-6929
Spanner Wrench

144276929
J05527-00S200P001: RNCC: 3 | RNVC: 2

3 Nov 1988

5120-14-479-0630
Face Spanner Wrench Socket

144790630
OCE82-16G: RNCC: 3 | RNVC: 2
1115957P00: RNCC: 5 | RNVC: 2

13 Dec 1995

5120-14-413-5828
Socket Head Screw Key

144135828
803-8: RNCC: 3 | RNVC: 2
80308: RNCC: 5 | RNVC: 2
803-8: RNCC: 5 | RNVC: 2

17 Dec 1986

5120-14-529-1912
Mecanique Extracteur

5120-14-216-5462
Hand Abrasive Wheel Dresser

142165462
NO PRIMARY REF14-216-5462: RNCC: 3 | RNVC: 2
208-3: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-437-1599
Elingage Outillage

144371599
27386513-1: RNCC: 3 | RNVC: 2
SG-AX095: RNCC: 5 | RNVC: 2

17 Jan 1990

5120-14-222-7130
Open End Wrench

142227130
34.13: RNCC: 3 | RNVC: 2
35-13X13: RNCC: 3 | RNVC: 2
3148510981307: RNCC: 5 | RNVC: 2
34-13: RNCC: 5 | RNVC: 2
91592255: RNCC: 5 | RNVC: 2
0098130: RNCC: 5 | RNVC: 9
MO001903: RNCC: 6 | RNVC: 9
85-686-0393: RNCC: 6 | RNVC: 9

1 Jan 1966

5120-14-428-5828
Equipe Etrier

144285828
46AM101-01-2: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-430-0862
Spanner Wrench

144300862
6814-70638: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-546-9147
Mattock-Pick Handle

145469147
079724: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-14-363-9545
Mandrin Demmancheme

143639545
16380259: RNCC: 3 | RNVC: 2
16380259: RNCC: 5 | RNVC: 9

7 Aug 1980

5120-14-572-2510
Electrical Contact Remover

145722510
03406300F0: RNCC: 3 | RNVC: 2

18 Jun 2012

5120-14-564-9062
Seal Inserter

145649062
885748: RNCC: 3 | RNVC: 2

16 Jun 2010

5120-14-217-4759
Outil De Demontage

142174759
8140-82: RNCC: 3 | RNVC: 2
8140-82: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-031-6864

5120-14-204-9116

5120-14-427-2149
Support Plaque

144272149
46AM101-02-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-385-3380
Socket Wrench Socket

143853380
365A93-3362-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-450-7493
Flat Tip Screwdriver

144507493
NO PRIMARY REF14-450-7493: RNCC: 3 | RNVC: 2
646250: RNCC: 5 | RNVC: 9
EB.4X30: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-302-5099
Support Arrache Rlt

143025099
NO PRIMARY REF14-302-5099: RNCC: 3 | RNVC: 2
42-25-04-061: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-387-1634
Sertissage Etrier

143871634
854-200-001-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-490-6956
Handle

144906956
241 H 01510 500: RNCC: 3 | RNVC: 2
F300 0T 000 1094: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6865
Drill

144906865
240 D 01492 000: RNCC: 3 | RNVC: 2
F300 0T 000 0969: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-395-5884
Flat Tip Screwdriver

143955884
5-1881B43152-642: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-349-3819
Melangeu Defreinoir

143493819
9970-125-958: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-459-6421
Cle Speciale

144596421
312-07965-001-W26H: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-236-4569

5120-14-314-4892
Cle Ecrou Vilebrequ

143144892
M2D61052: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-313-9417

5120-14-233-6946

5120-14-292-0788
Outillage Point Mor

142920788
NO PRIMARY REF14-292-0788: RNCC: 3 | RNVC: 2
AE26: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-331-4416
Socket Wrench Handle Bar

143314416
BR4X509: RNCC: 3 | RNVC: 2
4X509: RNCC: 5 | RNVC: 2
TL3674: RNCC: 5 | RNVC: 2
85-100-4925: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-343-8362
Graissage Montage

143438362
MF012-31-00: RNCC: 3 | RNVC: 2

13 Jul 1977

5120-14-393-4136
Socket Head Screw Key

143934136
85-183: RNCC: 3 | RNVC: 2
3148511258408: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-265-9718
Outil Elargeur Pour

142659718
VTR200-1092: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-440-5459
Cle

144405459
51973: RNCC: 3 | RNVC: 2
85-694-1107: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-564-1693
Screwdriver Bit Holder

145641693
AM.H: RNCC: 3 | RNVC: 2
0793442: RNCC: 5 | RNVC: 2
3148517934429: RNCC: 5 | RNVC: 2

12 Apr 2010

5120-14-417-1288
Peigne A Ailettes

144171288
547952: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-353-9394
Entraineur Vireur

143539394
02640049700: RNCC: 3 | RNVC: 2
026400497: RNCC: 5 | RNVC: 2

16 Jan 1979

5120-14-479-4279
Montage Cone

144794279
H47417: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-241-6480

5120-14-289-1467
Tournevis Lame Rond

142891467
T0URNEVISAMAGNETIQUE1-725: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-430-1074
Spanner Wrench

144301074
6232-54673: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-321-8072
Bearing Staking Installation Tool

143218072
3160S95-33-004: RNCC: 3 | RNVC: 2
85-100-3138: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-427-2061
Face Spanner Wrench Socket

144272061
46AM037-00-0002: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-262-9683
Spanner Wrench

142629683
35-130928: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-340-6868
Spanner Wrench

143406868
0S20230: RNCC: 3 | RNVC: 2
0MDS20230: RNCC: 5 | RNVC: 2
85-689-2328: RNCC: 6 | RNVC: 9

14 Feb 1977

5120-14-365-9723
Jet Montage Porte J

143659723
365A93-3204-21: RNCC: 3 | RNVC: 2

4 Nov 1980

5120-14-217-2647
Adaptateur Centrage

142172647
M12-037: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-217-3650
Etau Special

142173650
NO PRIMARY REF14-217-3650: RNCC: 3 | RNVC: 2
225249: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-399-3347
Open End Wrench

143993347
10-36X37C: RNCC: 3 | RNVC: 2
91567392: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-574-1790
Box Wrench

145741790
1-13-321: RNCC: 3 | RNVC: 2
E113321: RNCC: 5 | RNVC: 9

13 Dec 2012

5120-14-329-1317
Rodoir Ventouse

143291317
U.54AV4: RNCC: 3 | RNVC: 2
3148510704098: RNCC: 5 | RNVC: 2
0070409: RNCC: 5 | RNVC: 9
U54V4: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-490-8656
Porte O

144908656
4051 160 004 151: RNCC: 3 | RNVC: 2
F300 0T 000 4893: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-563-8088
Combination Box And Open End Wrench

145638088
813225-1: RNCC: 3 | RNVC: 2

17 Mar 2010

5120-14-424-7088
Hand Screw Starter

144247088
AFUX.1: RNCC: 3 | RNVC: 2
H24168: RNCC: 5 | RNVC: 2
3148510056753: RNCC: 5 | RNVC: 2
AFXU-1: RNCC: 5 | RNVC: 9
AFXU.1: RNCC: 5 | RNVC: 9
AFUX.1: RNCC: 5 | RNVC: 9
0005675: RNCC: 5 | RNVC: 9

7 Jun 1988

5120-14-330-7522
Tubes Meche Extract

143307522
32616: RNCC: 3 | RNVC: 9
32616: RNCC: 5 | RNVC: 9
85-673-3590: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-252-9932
Open End Wrench

142529932
NO PRIMARY REF14-252-9932: RNCC: 3 | RNVC: 2
673C79: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-208-0971
Open End Wrench

142080971
E74-301-38: RNCC: 2 | RNVC: 2
69-38: RNCC: 3 | RNVC: 2
3272670294592: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-385-9788
Spanner Wrench

143859788
0.411/60121: RNCC: 3 | RNVC: 2
0411-60121: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-300-9617
Mechanical Puller Attachment

143009617
341A93-3110-28: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-313-8779
Spanner Wrench

143138779
M2-052: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-337-4928
Cle Deverrouillage

143374928
A0303-010F4: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-396-4121
Empilage Outil

143964121
6274-51011: RNCC: 3 | RNVC: 2
6274-2500121: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-400-2387
Monta Demon Coffret

144002387
853-200-403-0: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-378-5567
Bearing And Bushing Inserter

143785567
6801P32-1682-00: RNCC: 3 | RNVC: 2
6801365A32-1682-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-507-4064
Socket Head Screw Key

145074064
68920-537-1: RNCC: 3 | RNVC: 2
68920-537-1: RNCC: 5 | RNVC: 9

3 Jul 1998

5120-14-527-8164
Socket Wrench Screwdriver Attachment

145278164
888-497-900-1: RNCC: 3 | RNVC: 2

21 Nov 2001

5120-14-271-7949
Electrical Contact Remover

142717949
06-1877-02: RNCC: 3 | RNVC: 2
06-1877-02: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-245-1809

5120-14-306-3509
Flat Tip Screwdriver

143063509
NO PRIMARY REF14-306-3509: RNCC: 3 | RNVC: 2
250P3: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-239-8845

5120-14-523-1352
Outil A Palier

145231352
317-50111: RNCC: 3 | RNVC: 2

8 Jan 2001

5120-14-239-5198

5120-14-234-3362
Extracteur

142343362
NO PRIMARY REF14-234-3362: RNCC: 3 | RNVC: 2
BE016203: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-566-1429
Mechanical Puller

145661429
OU209/OU211: RNCC: 3 | RNVC: 2

21 Oct 2010

5120-14-544-6193
Retaining Ring Pliers

145446193
682177: RNCC: 3 | RNVC: 2
071348000021000: RNCC: 5 | RNVC: 2

14 Feb 2005

5120-14-484-5421
Cable Tie Installation Tool

144845421
27368: RNCC: 3 | RNVC: 2

21 Nov 1996

5120-14-505-9376
Mechanical Puller Step Plate

145059376
H117138A: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-370-8386
Retaining Ring Pliers

143708386
43C14: RNCC: 3 | RNVC: 9
91396568: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-463-4981
Cable Tie Installation Tool

144634981
0000040000: RNCC: 3 | RNVC: 2
400: RNCC: 5 | RNVC: 2

17 Jun 1993

5120-14-386-7840
Electrical Contact Remover

143867840
M15515-109: RNCC: 3 | RNVC: 2
M15515-109: RNCC: 5 | RNVC: 2
9M15515-109: RNCC: 5 | RNVC: 2
M15515-109: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-311-4546
Bearing And Bushing Remover

143114546
3160S95-42-014: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-370-6163
Equipe Vis De Verin

143706163
11-5205-510: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-393-8809
Monte-Joint Outil

143938809
NO PRIMARY REF14-393-8809: RNCC: 3 | RNVC: 2
OU139389: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-530-5334
Socket Wrench Socket

145305334
SJ.7: RNCC: 3 | RNVC: 2

18 Jun 2002

5120-14-365-6506
Screwdriver Bit

143656506
4-815013: RNCC: 3 | RNVC: 2
000-10: RNCC: 5 | RNVC: 2
545-68: RNCC: 5 | RNVC: 2

8 Oct 1980

5120-14-276-3080
Socket Wrench Socket

142763080
0051290: RNCC: 3 | RNVC: 2
R.9L: RNCC: 5 | RNVC: 2
R9L: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-561-2695
Special Purpose Combination Wrench

145612695
98F29003502000: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-245-1834

5120-14-485-5874
Support De Montage

144855874
PL1NA003AA012613: RNCC: 3 | RNVC: 2

30 Jan 1997

5120-14-386-3942
Multiplicateur Coup

143863942
99250461501: RNCC: 3 | RNVC: 2
99-250-46-150-1: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-513-7388
Flat Tip Screwdriver

145137388
ENFD6560-1-2X6-5X200: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-398-1987
Spanner Wrench

143981987
853-100-052-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-401-4105
Spanner Wrench

144014105
332A93-3203-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-283-1678
Cle Speciale

142831678
761-3M735P11: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-365-8128
Leveling-Support Jack

143658128
120069-107: RNCC: 3 | RNVC: 9
91386961: RNCC: 5 | RNVC: 2

8 Oct 1980

5120-14-387-9808
Open End Wrench

143879808
853-100-073-0: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-450-7436
Hand Screw Jack Extension

144507436
5856270: RNCC: 3 | RNVC: 2

21 Oct 1991

5120-14-450-5078
Spanner Wrench

144505078
412173: RNCC: 3 | RNVC: 2
412173: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-458-4926
Seal Inserter And Remover

144584926
548684: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-360-6545
Spanner Wrench

143606545
8810241002: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-384-6104
Wrench Kit

143846104
132058: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-553-1151
Spanner Wrench

145531151
F47027: RNCC: 3 | RNVC: 2

5 Mar 2007

5120-14-436-1048
Spanner Wrench

144361048
716552: RNCC: 3 | RNVC: 2

5 Dec 1989

5120-14-220-7902
Open End Wrench

142207902
RACD16: RNCC: 3 | RNVC: 2
RACD16: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-527-5916
Spanner Wrench

145275916
46AM145: RNCC: 3 | RNVC: 2

30 Oct 2001

5120-14-264-9581
Spanner Wrench

142649581
0293-78: RNCC: 3 | RNVC: 2
RA293: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-559-9536
Socket Wrench Socket

145599536
14100037608: RNCC: 3 | RNVC: 2

9 Mar 2009

5120-14-334-8140

5120-14-560-0658
Flat Tip Screwdriver

145600658
ASF8X150: RNCC: 3 | RNVC: 2
772625: RNCC: 5 | RNVC: 2

19 Mar 2009

5120-14-414-8808
Cle De Manoeuvre

144148808
504220C: RNCC: 3 | RNVC: 2

18 Mar 1987

5120-14-233-7291

5120-14-222-6188

5120-14-342-7208

5120-14-385-9789
Spanner Wrench

143859789
0.411/60136: RNCC: 3 | RNVC: 2
0411-60136: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-248-7488
Cle Speciale

142487488
G1-15-662: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-402-8094
Spanner Wrench

144028094
31405242: RNCC: 3 | RNVC: 9
512131: RNCC: 5 | RNVC: 9
85-692-5796: RNCC: 6 | RNVC: 9

19 Jul 1985

5120-14-222-1638
Cle A Ergots Specia

142221638
9970-115-293-00: RNCC: 3 | RNVC: 2
9970-115-293: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-352-0245
Outillage De Mainti

143520245
330A93-2060-00: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-475-8955
Leveling-Support Jack

144758955
3626020: RNCC: 3 | RNVC: 2
18506863-7: RNCC: 5 | RNVC: 2
3626020: RNCC: 5 | RNVC: 2

10 May 1995

5120-14-274-8689
Extenseur Ensemble

142748689
R31674-6-18R50: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-424-3449
Open End Wrench

144243449
10-27X29: RNCC: 3 | RNVC: 2
10-27X29C: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-216-3218

5120-14-321-8088
Open End Wrench

143218088
3160S95-62-023: RNCC: 3 | RNVC: 2
85-100-3188: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-335-7361
Spanner Wrench

143357361
NO PRIMARY REF14-335-7361: RNCC: 3 | RNVC: 2
842857-79: RNCC: 5 | RNVC: 9

30 Jun 1976

5120-14-384-9235
Face Spanner Wrench Socket

143849235
9970-115-682: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-490-8677
Meche

144908677
4057 020 003 457: RNCC: 3 | RNVC: 2
F300 0T 000 4915: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-348-9535

5120-14-288-6796

5120-14-427-0823
Outillage Mandrin

144270823
536788: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-427-0886
Controle Broche

144270886
537243: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-369-8730

5120-14-386-4264
Centr Injec Gabarit

143864264
9970-131-170: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-568-5183
Mechanical Puller

145685183
2P97250-00: RNCC: 3 | RNVC: 2

9 Jun 2011

5120-14-471-8870
Simbleau

144718870
341A93-3227-21: RNCC: 3 | RNVC: 2
F300 0T 017 5653: RNCC: 5 | RNVC: 9

21 Sep 1994

5120-14-331-5444
Rallonge Pour Manut

143315444
NO PRIMARY REF14-331-5444: RNCC: 3 | RNVC: 2
MT99302043: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-222-6200
Socket Wrench Socket

142226200
0028270: RNCC: 3 | RNVC: 2
J.3/8L: RNCC: 5 | RNVC: 2
J3-8L: RNCC: 5 | RNVC: 2
J3.8L: RNCC: 5 | RNVC: 2
J3/8L: RNCC: 5 | RNVC: 2
JL3-8: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-378-5513
Bta Montage Jet

143785513
6801J33-4019-20: RNCC: 3 | RNVC: 2
6801360A33-4019-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-285-6245
Mechanical Puller Attachment

142856245
NO PRIMARY REF14-285-6245: RNCC: 3 | RNVC: 2
6457458: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-404-9545
Spanner Wrench

144049545
R085-003Y000B: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-385-3111
Maintien Ventil Cle

143853111
360A93-3221-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-357-9983
Graissage Montage

143579983
MMG060-01: RNCC: 3 | RNVC: 2
MMG060-01: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-226-3148
Outil De Matage

142263148
60290-03-020M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-428-5329
Graissage Montage

144285329
MMG060-30: RNCC: 3 | RNVC: 2
MMG060-30: RNCC: 5 | RNVC: 2

8 Dec 1988

5120-14-298-1435
Tap And Reamer Wrench

142981435
T0URNEAGAUCHEEXTENSIBLE4: RNCC: 3 | RNVC: 2
2801-5: RNCC: 3 | RNVC: 2
4: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-424-5618
Socket Wrench Ratchet Attachment

144245618
0980163: RNCC: 3 | RNVC: 2
TCO 3-8: RNCC: 5 | RNVC: 2
SP.1741: RNCC: 5 | RNVC: 2
SP1741: RNCC: 5 | RNVC: 2

28 May 1988

5120-14-546-8875
Flat Tip Screwdriver

145468875
ACZ.2X75: RNCC: 3 | RNVC: 2
168/395/3: RNCC: 5 | RNVC: 2

2 Sep 2005

5120-14-363-9872
Mechanical Puller Attachment

143639872
330A93-2050-00: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-222-6181
Socket Wrench Socket

142226181
J-9/16: RNCC: 3 | RNVC: 2
J9-16: RNCC: 3 | RNVC: 2
J.9/16: RNCC: 3 | RNVC: 2
3148510277608: RNCC: 5 | RNVC: 2
J9-16: RNCC: 5 | RNVC: 2
3272670237896: RNCC: 5 | RNVC: 2
0027760: RNCC: 5 | RNVC: 9
74J9-16: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-425-5972
Combination Box And Open End Wrench

144255972
39.5/8: RNCC: 3 | RNVC: 2
3148510999241: RNCC: 5 | RNVC: 2
0099924: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-316-5611
Bearing And Bushing Inserter And Remover

143165611
3210-95-32-370: RNCC: 3 | RNVC: 2
08-413: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-300-9618
Mechanical Puller Attachment

143009618
341A93-3110-29: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-249-6786
Tournevis Special

142496786
2-02622: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-520-4893
Cle Creneaux

145204893
2P84466-00: RNCC: 3 | RNVC: 2

17 May 2000

5120-14-490-8901
Lame

144908901
4067 200 000 478: RNCC: 3 | RNVC: 2
F300 0T 000 5175: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-569-8662
Flat Tip And Cross Tip Screwdriver Set

145698662
MODM.A5PB: RNCC: 3 | RNVC: 2

25 Oct 2011

5120-14-563-1930
Pry Bar

145631930
523213: RNCC: 3 | RNVC: 2
14100066737: RNCC: 5 | RNVC: 2

13 Jan 2010

5120-14-375-5348
Faux Mors

143755348
D46761: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-427-0976
Speciale Jauge

144270976
540581: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-566-4750
Mechanical Puller

145664750
62020683AA: RNCC: 3 | RNVC: 2

17 Nov 2010

5120-14-521-6336
Socket Wrench Socket

145216336
NO PRIMARY REF14-521-6336: RNCC: 3 | RNVC: 2
JB.17: RNCC: 5 | RNVC: 2
0029131: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-410-5684
Outil De Demontage

144105684
2125-9806-000: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-374-0840
Turnlock Fastener Inserter And Remover

143740840
G 0-103: RNCC: 3 | RNVC: 2
G0-103: RNCC: 5 | RNVC: 2

8 Dec 1981

5120-14-334-8057
Socket Wrench Socket

143348057
0051540: RNCC: 3 | RNVC: 2
R1-4L: RNCC: 5 | RNVC: 2
R.1/4L: RNCC: 5 | RNVC: 2
589962: RNCC: 5 | RNVC: 9
85-694-1098: RNCC: 6 | RNVC: 9

2 Jun 1976

5120-14-513-9720
Open End Wrench

145139720
ENFD29159-3-2X5-5: RNCC: 3 | RNVC: 2

21 Apr 1999

5120-14-264-0605
Socket Head Screw Key

142640605
801W5-64: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-328-1082
Socket Wrench Handle Bar

143281082
VTR400-12004: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-412-9790
Torque Wrench Adapter

144129790
853-100-235-0: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-478-5851
Collage Outillage

144785851
Z0104-406: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-317-4914
Swivel Knob Jeweler's Screwdriver Set

143174914
NO PRIMARY REF14-317-4914: RNCC: 3 | RNVC: 2
HB1: RNCC: 5 | RNVC: 2
HB1A: RNCC: 5 | RNVC: 2
91490719: RNCC: 5 | RNVC: 2
0503405: RNCC: 5 | RNVC: 2
503400HB1: RNCC: 5 | RNVC: 2
HB.1A: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-230-4322
Open End Wrench

142304322
NO PRIMARY REF14-230-4322: RNCC: 3 | RNVC: 2
25C20: RNCC: 5 | RNVC: 2
25C20: RNCC: 5 | RNVC: 2
25C20: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-361-4899
Wrench Kit

143614899
8810297000: RNCC: 3 | RNVC: 2
85-691-1401: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-375-2535
Retaining Ring Pliers

143752535
73-115-019: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-422-4096
Adjustable Wrench

144224096
113.10CP: RNCC: 3 | RNVC: 9
91620553: RNCC: 5 | RNVC: 2
99039035: RNCC: 5 | RNVC: 2
235-3889: RNCC: 5 | RNVC: 2
0715 221 10: RNCC: 5 | RNVC: 2
0132530: RNCC: 5 | RNVC: 9
3148511325308: RNCC: 5 | RNVC: 9
FACOM113.10CP: RNCC: 5 | RNVC: 9

3 Mar 1988

5120-14-398-0727
Spanner Wrench

143980727
6-33041-053: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-517-9967
Six Point Tip Screwdriver

145179967
ENFD6577-60X175: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-439-6223
Spanner Wrench

144396223
6801G32-2126-00: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-331-5488
Rallonge Pour Manut

143315488
NO PRIMARY REF14-331-5488: RNCC: 3 | RNVC: 2
MT99302662: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-359-8335
Hand Sheet Metal Pipe Crimping Tool

143598335
G6-20726: RNCC: 3 | RNVC: 2
85-688-3191: RNCC: 6 | RNVC: 9

15 Oct 1979

5120-14-202-5524
Tap And Reamer Wrench

142025524
NO PRIMARY REF14-202-5524: RNCC: 3 | RNVC: 2
38-3: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-528-7270
Socket Head Screw Key

145287270
815-1-99-127: RNCC: 3 | RNVC: 2

6 Feb 2002

5120-14-304-2480
Bague Montage Et De

143042480
D1553-4817: RNCC: 3 | RNVC: 2
D1553-4817: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-559-2441
Spanner Wrench

145592441
4041567B: RNCC: 3 | RNVC: 2

16 Dec 2008

5120-14-208-7283

5120-14-284-1881
Cle Demontage Voyan

142841881
BEAE1172: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-454-5294
Screwdriver Handle

144545294
31315-EB5: RNCC: 3 | RNVC: 2
91472461: RNCC: 5 | RNVC: 2

2 Apr 1992

5120-14-232-9929
Matrice De Sertissa

142329929
45065-3: RNCC: 3 | RNVC: 2
45065-2: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-406-5708
Face Spanner Wrench Socket

144065708
853-200-739-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-261-7359
Cle A Fourche Speci

142617359
NO PRIMARY REF14-261-7359: RNCC: 3 | RNVC: 2
144K178: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-391-7811
Collage Outillage

143917811
707161: RNCC: 3 | RNVC: 2
28-707161-8: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-456-7161
Sheet Metalworking Dolly Block

144567161
853-670-407-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-530-2084
Socket Head Screw Key

145302084
83H.7: RNCC: 3 | RNVC: 2
3148511240717: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-484-6510
Socket Wrench Socket

144846510
K.35HA: RNCC: 3 | RNVC: 2
3148510300238: RNCC: 5 | RNVC: 2
0030023: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-514-1220
Six Point Tip Screwdriver

145141220
ENFD6566-1-2X6-5X125: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-219-2373
Extracteur Daxe

142192373
M12-048: RNCC: 3 | RNVC: 2
M12048: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-042-9522
Reglage Outil

140429522
UJN088-52: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-406-5659
Joint Tori Emmanche

144065659
853-200-718-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-396-2336
M Extracteur Disque

143962336
90890-02344: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-286-2247
Open End Wrench

142862247
20.35: RNCC: 3 | RNVC: 2
20-35: RNCC: 5 | RNVC: 2
3148510937502: RNCC: 5 | RNVC: 2
1111615B00: RNCC: 5 | RNVC: 2
91367189: RNCC: 5 | RNVC: 2
0093750: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-427-7607
Spanner Wrench

144277607
NO PRIMARY REF14-427-7607: RNCC: 3 | RNVC: 2
E0949613: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-246-2008
Socket Wrench Handle Bar

142462008
D1010-1152: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-552-8343
Socket Head Screw Key

145528343
83H.15: RNCC: 3 | RNVC: 2
83H.15: RNCC: 5 | RNVC: 2
3148511241516: RNCC: 5 | RNVC: 2

6 Feb 2007

5120-14-394-9284
Socket Head Screw Key

143949284
39078923: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-347-0218
Socket Wrench Spanner Attachment

143470218
D47024: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-529-2693
Cross Tip Screwdriver

145292693
ADH.1X75: RNCC: 3 | RNVC: 2
3148510046501: RNCC: 5 | RNVC: 2

20 Mar 2002

5120-14-479-4767
Open End Wrench

144794767
701859-00: RNCC: 3 | RNVC: 2

15 Jan 1996

5120-14-268-0918
Screwdriver Bit

142680918
RU761-43M922P2: RNCC: 3 | RNVC: 2
761-43M922P2: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-309-7433
Bearing Staking Installation Tool

143097433
341A93-3508-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-517-1763
Open End Wrench

145171763
G040Z010-000-0010: RNCC: 3 | RNVC: 2

15 Nov 1999

5120-14-304-6345
Combination Box And Open End Wrench Set

143046345
NO PRIMARY REF14-304-6345: RNCC: 3 | RNVC: 2
40JE22: RNCC: 5 | RNVC: 2
0110708S00: RNCC: 5 | RNVC: 2
91381437: RNCC: 5 | RNVC: 2
0713 301 42: RNCC: 5 | RNVC: 2
0528420: RNCC: 5 | RNVC: 2
40.JE22: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-499-1814
Socket Wrench Socket

144991814
68835111-118: RNCC: 3 | RNVC: 2
101022010029A: RNCC: 3 | RNVC: 9
F300 0T 019 7330: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-348-5098

5120-14-239-5201

5120-14-391-4223
Socket Head Screw Key

143914223
23075790-9: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-448-8684
Socket Wrench Handle Bar

144488684
K.126: RNCC: 3 | RNVC: 2
8031876G00: RNCC: 5 | RNVC: 2
91729310: RNCC: 5 | RNVC: 2
3148510307152: RNCC: 5 | RNVC: 2
K126: RNCC: 5 | RNVC: 2
0030715: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-201-2197
Socket Wrench Socket

142012197
0055340: RNCC: 3 | RNVC: 2
S16L: RNCC: 5 | RNVC: 2
S.16L: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-444-6739
Socket Wrench Socket

144446739
82-2-01-055E00-519902F: RNCC: 3 | RNVC: 2
0409295W00: RNCC: 5 | RNVC: 2

16 Jan 1991

5120-14-244-6653
Open End Wrench

142446653
E74301C8AGW: RNCC: 2 | RNVC: 2

1 Jan 1968

5120-14-439-9081
Screw Push-Pull Jack

144399081
228570: RNCC: 3 | RNVC: 9

5 Jun 1990

Load More Results