What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 90 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 90 of 110

5120-14-249-4062
Cle Extraction De C

142494062
8500-37: RNCC: 3 | RNVC: 2
850037: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-472-5226
Socket Head Screw Key

144725226
41MI89-02M24P11: RNCC: 3 | RNVC: 2

26 Oct 1994

5120-14-483-2767
Socket Wrench Socket

144832767
R.13LA: RNCC: 3 | RNVC: 2
R.13LA: RNCC: 5 | RNVC: 2
103393: RNCC: 5 | RNVC: 2
3148510513355: RNCC: 5 | RNVC: 2
235-4034: RNCC: 5 | RNVC: 2
0051335: RNCC: 5 | RNVC: 9
FACOMR.13LA: RNCC: 5 | RNVC: 9

29 Aug 1996

5120-14-332-0788
Socket Wrench Adapter

143320788
160-71960-38: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-496-0050
Cle

144960050
NO PRIMARY REF14-496-0050: RNCC: 3 | RNVC: 2
74-B4-5: RNCC: 5 | RNVC: 9
F300 0T 020 7502: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-466-0092
Slip Joint Pliers

144660092
851-915-004-0: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-216-2042
Open End Wrench

142162042
RT2883: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-373-0355
Cle Pour Rotule

143730355
269285: RNCC: 3 | RNVC: 2
269285: RNCC: 5 | RNVC: 9

21 Sep 1981

5120-14-534-3250
Open End Wrench

145343250
NNM0099087406433: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-228-5125

5120-14-384-7623
Electrical Card Extractor

143847623
20198032: RNCC: 3 | RNVC: 2
20198032: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-437-6859
Preformed Packing Inserter And Remover

144376859
9689160259: RNCC: 3 | RNVC: 2
1688110028: RNCC: 5 | RNVC: 2
9689160259: RNCC: 5 | RNVC: 2

7 Feb 1990

5120-14-431-7795
Spanner Wrench

144317795
0411-60144: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-040-7360
Fixed Open End Wrench Set

140407360
000148003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-436-0167
Montage Doseur

144360167
RT19333: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-458-2900
Face Spanner Wrench Socket

144582900
NO PRIMARY REF14-458-2900: RNCC: 3 | RNVC: 2
BL44417: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-466-2591
De Freinage Outil

144662591
0XB501-534-800-02: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-369-1245
Socket Wrench Socket

143691245
MS654-011: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-264-7891
Blacksmith's Top Swage

142647891
647-20: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-557-9507
Telescoping Pole

145579507
A5Q00004997: RNCC: 3 | RNVC: 2
FDUM292: RNCC: 5 | RNVC: 2

7 Aug 2008

5120-14-495-2751
Cle Plate A

144952751
10380116: RNCC: 3 | RNVC: 2
F300 0T 018 9300: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-461-6796
Flat Tip Screwdriver

144616796
0003827: RNCC: 3 | RNVC: 2
AC.3,5X150: RNCC: 5 | RNVC: 2

22 Mar 1993

5120-14-290-7510
Piston Ring Expander

142907510
751.T: RNCC: 3 | RNVC: 2
3148511982501: RNCC: 5 | RNVC: 2
751T: RNCC: 5 | RNVC: 2
101218: RNCC: 5 | RNVC: 2
0715 57 24: RNCC: 5 | RNVC: 2
0198250: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-390-7247
Comparateur Touche

143907247
MMJ0420301: RNCC: 3 | RNVC: 2
MMJ0420301: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-249-9694

5120-14-290-3615
Plier Type Eyelet Punch

142903615
PINCEEMP0RTEPIECEP0SE0EILLET: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-290-3615: RNCC: 3 | RNVC: 2
PINCEEMP0RTEPIECEP0SE0EILLET: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-204-9382
Mattock-Pick Handle

142049382
NO PRIMARY REF14-204-9382: RNCC: 3 | RNVC: 2
ST38SMGB0I4-112: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-400-0132
Terminal Crimping Tool Contact Positioner

144000132
8400-2282: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-366-5693
Spanner Wrench

143665693
360A93-3306-20: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-304-4466
Open End Wrench

143044466
09-19: RNCC: 3 | RNVC: 2
09-19: RNCC: 5 | RNVC: 2
M2-070: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-510-1021
Cartouc Extracteur

145101021
FIC38-72MT: RNCC: 3 | RNVC: 2
5120AA8005492: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-239-5203

5120-14-223-5348
Cle Pour Ecrou A En

142235348
044BBC4BBF4AREP5: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-565-5942
Socket Wrench Handle

145655942
J.155A: RNCC: 3 | RNVC: 2
0768765: RNCC: 5 | RNVC: 2
3148517687653: RNCC: 5 | RNVC: 2

6 Sep 2010

5120-14-574-1817
Box Wrench

145741817
1-13-324: RNCC: 3 | RNVC: 2
E113324: RNCC: 5 | RNVC: 9

13 Dec 2012

5120-14-230-5000
Open End Wrench

142305000
1483-37X39: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-521-6312
Spanner Wrench

145216312
300248: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-532-1822
Socket Wrench Attachment Universal Joint

145321822
SJ.240: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-14-379-8083
Open End Wrench

143798083
10-14X15CP: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-535-2363
Spanner Wrench

145352363
6521POC: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-445-2530
Socket Wrench Socket

144452530
M0T869: RNCC: 3 | RNVC: 2

6 Feb 1991

5120-14-482-3527
Hand Armament Subsystem Carrier

144823527
F8P999590001001: RNCC: 3 | RNVC: 2

5 Jul 1996

5120-14-236-8765
Spanner Wrench

142368765
0664-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-447-5108
Electron Tube Socket Contact Positioner

144475108
0885252E00: RNCC: 3 | RNVC: 2
0885252E00: RNCC: 5 | RNVC: 9

27 May 1991

5120-14-554-8523
Screwdriver Bit

145548523
EH.210L: RNCC: 3 | RNVC: 2

31 Aug 2007

5120-14-436-0207
Preformed Packing Inserter

144360207
806272: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-437-0680
Open End Wrench

144370680
11157: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-041-8680
Extracteur De Carte

140418680
79060453: RNCC: 3 | RNVC: 2
79060453: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-352-1605

5120-14-491-8560
Cle

144918560
416360482121: RNCC: 3 | RNVC: 2
F300 0T 005 1362: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-456-7141
Evasage Poincon

144567141
853-930-155-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-524-4149
Screwdriver Bit

145244149
ED.201: RNCC: 3 | RNVC: 2
3148510226613: RNCC: 5 | RNVC: 2

14 Mar 2001

5120-14-469-9059
Open End Wrench

144699059
46.21VSE: RNCC: 3 | RNVC: 2
3148511057100: RNCC: 5 | RNVC: 2
0105710: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-469-9056
Open End Wrench

144699056
46.17VSE: RNCC: 3 | RNVC: 2
3148511056707: RNCC: 5 | RNVC: 2
0105670: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-400-1407
Projectile Holding Tool

144001407
16299914: RNCC: 1 | RNVC: 2
44DA00-702452D: RNCC: 3 | RNVC: 2
16299914: RNCC: 5 | RNVC: 9

24 Apr 1985

5120-14-544-7775
Detent Handling Tool

145447775
6501CDC110: RNCC: 3 | RNVC: 2

23 Feb 2005

5120-14-538-8460
Spanner Wrench

145388460
NGM0021020100325: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-399-4022
Socket Wrench Attachment Universal Joint

143994022
CBE1: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-470-8387
Mechanical Puller Adapter

144708387
7M576: RNCC: 3 | RNVC: 2

8 Jul 1994

5120-14-554-3927
Screw Thread Insert Inserter

145543927
1735A08100: RNCC: 3 | RNVC: 2

28 Jun 2007

5120-14-486-2833
Spring Inserter And Remover

144862833
F117154: RNCC: 3 | RNVC: 2

10 Mar 1997

5120-14-436-0280
Preformed Packing Inserter

144360280
RT30828: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-383-4661
Electrical Card Extractor

143834661
20198003: RNCC: 3 | RNVC: 2
20198003: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-409-5120
Bearing And Bushing Inserter

144095120
800A294000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-381-4190
Socket Wrench Handle Bar

143814190
0094401000: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-489-3187
Face Spanner Wrench Socket

144893187
10225810: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-400-7327
Electrical Card Extractor

144007327
95B18670: RNCC: 3 | RNVC: 2

15 May 1985

5120-14-295-2901
Spanner Wrench

142952901
0399-12: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-550-5816
Socket Wrench Socket

145505816
14100009470: RNCC: 3 | RNVC: 2

28 Jun 2006

5120-14-551-1481
Slip Joint Pliers

145511481
181.CPE: RNCC: 3 | RNVC: 2
181.CPE: RNCC: 5 | RNVC: 2

29 Aug 2006

5120-14-220-7885
Open End Wrench

142207885
RACC102: RNCC: 3 | RNVC: 2
RACC102: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-488-5590
Cantilever Jaw Clamp

144885590
271A.80: RNCC: 3 | RNVC: 2
271A80: RNCC: 5 | RNVC: 2
3148511626412: RNCC: 5 | RNVC: 2
2695 415 75: RNCC: 5 | RNVC: 2
0162641: RNCC: 5 | RNVC: 2

21 May 1997

5120-14-339-1786
Detent Handling Tool

143391786
8810591000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-344-7860
Cle A Ergots Guide

143447860
8811060201: RNCC: 3 | RNVC: 2
85-800-6665: RNCC: 6 | RNVC: 9

9 Sep 1977

5120-14-328-1075
Spanner Wrench

143281075
VTR400-1130WZ: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-477-5173
Socket Head Screw Key

144775173
8-394BE7879: RNCC: 3 | RNVC: 2
85-658-1160: RNCC: 6 | RNVC: 9

7 Sep 1995

5120-14-393-4115
Socket Head Screw Key

143934115
80-8: RNCC: 3 | RNVC: 2
61-M8: RNCC: 3 | RNVC: 2
61.M8: RNCC: 3 | RNVC: 2
3272670273900: RNCC: 5 | RNVC: 2
0715 31 11: RNCC: 5 | RNVC: 2
3148511220306: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-521-5320
Socket Wrench Socket

145215320
K.42HA: RNCC: 3 | RNVC: 2
K42HA: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-483-0681
Cross Tip Screwdriver

144830681
ACZPH.1X75: RNCC: 3 | RNVC: 2
3148510042183: RNCC: 5 | RNVC: 2
ACPH.1X75: RNCC: 5 | RNVC: 2
0613 940 1: RNCC: 5 | RNVC: 2
0004218: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-526-2783
Bearing And Bushing Inserter And Remover

145262783
U.49AD9: RNCC: 3 | RNVC: 2

13 Jul 2001

5120-14-219-5564
Cle Pour Prise De C

142195564
17-9-62: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-561-9304
Combination Box And Open End Wrench

145619304
440.8: RNCC: 3 | RNVC: 2
3148517679573: RNCC: 5 | RNVC: 2
767957: RNCC: 5 | RNVC: 9

17 Sep 2009

5120-14-202-5585
Spanner Wrench

142025585
E74-323-45: RNCC: 2 | RNVC: 2
6287: RNCC: 3 | RNVC: 2
6514: RNCC: 3 | RNVC: 2
74245-90X100: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-432-2914
Spring Inserter And Remover

144322914
70635: RNCC: 3 | RNVC: 2

31 May 1989

5120-14-426-6703
Spanner Wrench

144266703
8815403000: RNCC: 3 | RNVC: 2
89415033: RNCC: 5 | RNVC: 2

15 Sep 1988

5120-14-538-8792
Spring Inserter And Remover

145388792
NGM0022030200421: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-525-0014
Stakeholder Bench Plate

145250014
CKS.38A: RNCC: 3 | RNVC: 2

10 May 2001

5120-14-434-3210
Socket Wrench Socket

144343210
OUT50319: RNCC: 3 | RNVC: 2
0UT50319: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-344-3390
Vise Jaw Caps

143443390
PR47662: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-567-3261
Socket Wrench Set

145673261
R.425AP: RNCC: 3 | RNVC: 2
91911834: RNCC: 5 | RNVC: 2

7 Mar 2011

5120-14-225-5585
Extracteur Pour Ech

142255585
41975: RNCC: 3 | RNVC: 2
41975A: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-247-9654
Cardan Cle A Douill

142479654
RT20883: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-209-4191

5120-14-232-3886

5120-14-455-0067
Sheet Metalworking Stake

144550067
853-600-326-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-566-2395
Slip Joint Pliers

145662395
181.25G: RNCC: 3 | RNVC: 2
3148517778054: RNCC: 5 | RNVC: 2

29 Oct 2010

5120-14-220-8551
Mordache Speciale C

142208551
PR46569: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-325-6364
Pousse Roulem Outil

143256364
0-62781-1: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-246-8123
Open End Wrench

142468123
13-1X1 1-8: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-348-5086

5120-14-280-1397

5120-14-413-2730
Stud Inserter And Remover

144132730
NO PRIMARY REF14-413-2730: RNCC: 3 | RNVC: 2
0540405: RNCC: 5 | RNVC: 2
287A.JS5: RNCC: 5 | RNVC: 2
287AJS5: RNCC: 5 | RNVC: 2

26 Nov 1986

5120-14-200-9494
Piston Ring Compressor

142009494
NO PRIMARY REF14-200-9494: RNCC: 3 | RNVC: 2
301130: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-548-4262
Bearing And Bushing Inserter And Remover

145484262
U.49P3: RNCC: 3 | RNVC: 2

16 Jan 2006

5120-14-530-6462
Spanner Wrench

145306462
R46921: RNCC: 3 | RNVC: 2

1 Jul 2002

5120-14-543-6054
Open End Wrench

145436054
C04050713: RNCC: 3 | RNVC: 2

24 Nov 2004

5120-14-441-1997
Terminal Crimping Tool Contact Positioner

144411997
R073025003: RNCC: 3 | RNVC: 2
91711056: RNCC: 5 | RNVC: 2
73025003: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-457-9949
Socket Head Screw Key

144579949
548133: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-398-1449
Spanner Wrench

143981449
F46742: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-422-2207
Spanner Wrench

144222207
0496-213000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-457-3010
Screwdriver Bit

144573010
EV.206: RNCC: 3 | RNVC: 2
3148510257006: RNCC: 5 | RNVC: 2
0025700: RNCC: 5 | RNVC: 9

25 Aug 1992

5120-14-475-3096
Electrical Contact Remover

144753096
16244423: RNCC: 3 | RNVC: 2

29 Mar 1995

5120-14-531-8874
Geared Socket Wheel Stud Nut Wrench

145318874
T651G3001101: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-309-4795
Pliers

143094795
409: RNCC: 3 | RNVC: 2
409: RNCC: 5 | RNVC: 2
3148511753309: RNCC: 5 | RNVC: 2
0048636T00: RNCC: 5 | RNVC: 2
0175330: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-444-7597
Cle De Serrage

144447597
0478-200007: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-227-0891

5120-14-274-5286

5120-14-577-3040
Seal Inserter And Remover

145773040
HLA7069: RNCC: 3 | RNVC: 2

4 Sep 2013

5120-14-280-3891
Spanner Wrench

142803891
D1557-60005: RNCC: 3 | RNVC: 2
D1557-60005: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-520-4864
Embout Hexagonal

145204864
2P84415-00: RNCC: 3 | RNVC: 2

17 May 2000

5120-14-313-7305
Open End Wrench

143137305
NO PRIMARY REF14-313-7305: RNCC: 3 | RNVC: 2
148100-78: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-386-1543
Emman Satel Support

143861543
6801J32-1036-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-478-3301
Screwdriver Bit Holder

144783301
NO PRIMARY REF14-478-3301: RNCC: 3 | RNVC: 2
3148510228327: RNCC: 5 | RNVC: 2
EF.1P5: RNCC: 5 | RNVC: 2
1077695T00: RNCC: 5 | RNVC: 2
0022832: RNCC: 5 | RNVC: 9

25 Oct 1995

5120-14-511-7675
Fixed Open End Wrench Set

145117675
MO-68008/19: RNCC: 3 | RNVC: 2

15 Jan 1999

5120-14-370-8867
Torquage Ecro Socle

143708867
6801R31-1000-20: RNCC: 3 | RNVC: 2
6801366A31-1000-20: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-386-1572
Maintien Cde Rotor

143861572
6801J33-4074-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-239-8118

5120-14-371-2211

5120-14-237-9399
Blacksmith's Top Swage

142379399
M0B17-16EC: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-441-4001
Socket Wrench Screwdriver Attachment

144414001
MHP382-23: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-313-7293
Cone De Montage

143137293
S16-0609-1831: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-245-9067
Collier Pour Evasem

142459067
7062BA1C0LLIERT1-14: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-431-4827
Socket Head Screw Key

144314827
0372-42-10174: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-376-8606
Mechanical Puller Attachment

143768606
45141A: RNCC: 3 | RNVC: 2
CD9MA45141T: RNCC: 3 | RNVC: 2
45141: RNCC: 5 | RNVC: 2
71-43-45141: RNCC: 5 | RNVC: 2

28 Apr 1982

5120-14-285-4856
Stud Inserter And Remover

142854856
567BISPL: RNCC: 3 | RNVC: 9
MUL567BISPL: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-429-1351
Torque Wrench Adapter

144291351
326530: RNCC: 3 | RNVC: 2
326530: RNCC: 5 | RNVC: 9

11 Jan 1989

5120-14-490-6997
Wrench

144906997
241 W 03059 060: RNCC: 3 | RNVC: 2
F300 0T 000 1185: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-558-7483
Socket Wrench Socket

145587483
K.30HB: RNCC: 3 | RNVC: 2
659868: RNCC: 5 | RNVC: 2

30 Oct 2008

5120-14-232-2213
Socket Wrench Handle

142322213
WGA: RNCC: 3 | RNVC: 2
7758: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-487-5290
Spanner Wrench

144875290
62AM028: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-14-488-6849
Bearing And Bushing Inserter And Remover

144886849
287074468: RNCC: 3 | RNVC: 2
F300 0T 018 9339: RNCC: 6 | RNVC: 9

28 May 1997

5120-14-269-4956
Cone Demmanchement

142694956
6504: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-319-0677

5120-14-323-2144

5120-14-361-1412
Socket Head Screw Key

143611412
NO PRIMARY REF14-361-1412: RNCC: 3 | RNVC: 2
8645: RNCC: 5 | RNVC: 9

24 Jan 1980

5120-14-294-0701
Blacksmith's Vise

142940701
NO PRIMARY REF14-294-0701: RNCC: 3 | RNVC: 2
18-165: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-273-6793
Open End Wrench

142736793
8810014060: RNCC: 3 | RNVC: 2
85-670-6560: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-560-8658
Flat Tip Screwdriver

145608658
A2,5X75VE: RNCC: 3 | RNVC: 2
3148517745599: RNCC: 5 | RNVC: 2

27 May 2009

5120-14-494-1178
Cle

144941178
NO PRIMARY REF14-494-1178: RNCC: 3 | RNVC: 2
825-99928: RNCC: 5 | RNVC: 2
F300 0T 015 5298: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-454-9499
Flat Tip Screwdriver

144549499
AEF.4X75: RNCC: 3 | RNVC: 2
3148510048987: RNCC: 5 | RNVC: 2
AEF4X75: RNCC: 5 | RNVC: 2
104-3941: RNCC: 5 | RNVC: 2
0613 460 10: RNCC: 5 | RNVC: 2
004898: RNCC: 5 | RNVC: 9
FACOMAEF4X75: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-421-1302
Spanner Wrench

144211302
M31-138: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-513-9795
Open End Wrench

145139795
ENFD29159-5X7: RNCC: 3 | RNVC: 2

21 Apr 1999

5120-14-384-7612
Electrical Card Extractor

143847612
20198021: RNCC: 3 | RNVC: 2
20198021: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-406-6555
Emmanchement Outil

144066555
853-200-816-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-384-7342
Electrical Card Extractor

143847342
NO PRIMARY REF14-384-7342: RNCC: 3 | RNVC: 2
16931961: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-316-6730
Open End Wrench

143166730
AK735: RNCC: 3 | RNVC: 2
AK735: RNCC: 5 | RNVC: 1
85-658-1233: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-351-2449
Verin Hydraul Valve

143512449
4RLB29: RNCC: 3 | RNVC: 9
RAS4RLB29: RNCC: 5 | RNVC: 9

10 Aug 1978

5120-14-321-9965
Cle Pour Culbuteur

5120-14-464-9111
Maintien Empreinte

144649111
851-930-309-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-368-0749
Flat Tip Screwdriver

143680749
AGH.5,5X100: RNCC: 3 | RNVC: 2
AGH.5,5X100: RNCC: 5 | RNVC: 2
3148510058351: RNCC: 5 | RNVC: 2
AGH5-5X100: RNCC: 5 | RNVC: 2
91706369: RNCC: 5 | RNVC: 2
0005835: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-387-9815
Wrench Extension Handle

143879815
853-100-064-0: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-274-8682
Bague De Cone

142748682
R31674-18-18R29-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-306-3505
Slip Joint Pliers

143063505
NO PRIMARY REF14-306-3505: RNCC: 3 | RNVC: 2
0715 02 70: RNCC: 5 | RNVC: 2
201-15G: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-455-5056
Retaining Ring Pliers

144555056
190-13: RNCC: 3 | RNVC: 2
3272670236721: RNCC: 5 | RNVC: 2

26 May 1992

5120-14-040-5862
Outil Special

140405862
0-73777: RNCC: 3 | RNVC: 2
073777: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-267-6349

5120-14-254-9805

5120-14-401-6071
Retraction Cone

144016071
NO PRIMARY REF14-401-6071: RNCC: 3 | RNVC: 2
0U141362: RNCC: 5 | RNVC: 9
OU141362: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-411-2558
Bearing And Bushing Inserter And Remover

144112558
8813932000: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-396-6242
Mechanical Puller Attachment

143966242
0-42660-3: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-490-0616
Flat Tip Screwdriver

144900616
AY.8X175VE: RNCC: 3 | RNVC: 2
0613 180 8: RNCC: 5 | RNVC: 2
0012862: RNCC: 5 | RNVC: 2
3148510130552: RNCC: 5 | RNVC: 2
AY.8X175VSE: RNCC: 5 | RNVC: 9
3148510128627: RNCC: 5 | RNVC: 9
MO003132: RNCC: 6 | RNVC: 9

10 Sep 1997

5120-14-436-0191
Preformed Packing Inserter

144360191
RT30531: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-228-0085

5120-14-391-6750
Quick Adjusting Screw Clamp

143916750
272A.300: RNCC: 3 | RNVC: 2
0163003: RNCC: 5 | RNVC: 2
272-30: RNCC: 5 | RNVC: 2
272A300: RNCC: 5 | RNVC: 2
3148511630037: RNCC: 5 | RNVC: 2
0695 948 30: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-404-4503
Bearing And Bushing Inserter

144044503
NO PRIMARY REF14-404-4503: RNCC: 3 | RNVC: 2
96200-78: RNCC: 5 | RNVC: 9

30 Oct 1985

5120-14-378-2695
Pliers

143782695
E73-141BECC0URTIS0LE: RNCC: 2 | RNVC: 2
253-16P0-PVC: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-14-425-5796
Basculeur Cle Dynam

144255796
0747154: RNCC: 3 | RNVC: 2
SP1735D-3-1010: RNCC: 5 | RNVC: 2

9 Jul 1988

5120-14-222-6203
Socket Wrench Socket

142226203
0028310: RNCC: 3 | RNVC: 2
J.1/2L: RNCC: 5 | RNVC: 2
J1.2L: RNCC: 5 | RNVC: 2
J1/2L: RNCC: 5 | RNVC: 2
JL1-2: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-226-3147
Support De Montage

142263147
60290-030M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-316-9816
Open End Wrench

143169816
70-52X54: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-315-1855
Chasse-Joint

143151855
61854-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-576-7856
Torque Wrench

145767856
DYT-5-0: RNCC: 3 | RNVC: 2

15 Jul 2013

5120-14-404-0346
Pince Depose Bague

144040346
9970-121-354: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-237-4728
Detent Handling Tool

142374728
3130S98-02-010: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-385-3352
Mechanical Puller Attachment

143853352
365A93-3242-01: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-535-5256
Spanner Wrench

145355256
365A93-4241-00: RNCC: 3 | RNVC: 2

31 May 2003

5120-14-273-7544
Carpenters' Pincers

142737544
E73-101-22RENF0RCEE: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-304-4054
Wrench Kit

143044054
TMY20-28-302: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-347-9641
Electrical Card Extractor

143479641
NO PRIMARY REF14-347-9641: RNCC: 3 | RNVC: 2
4698N: RNCC: 5 | RNVC: 9

29 Mar 1978

5120-14-450-3101
Roulement Coupelle

144503101
30AM131-07: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-212-9151
Cle Pour Ecrous Den

142129151
9970-115-012-01: RNCC: 3 | RNVC: 2
9970-115-012: RNCC: 3 | RNVC: 2
171-154: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-382-7068
Axe Extracteur

143827068
1501-121E33-206-01-0: RNCC: 3 | RNVC: 2
1501-121E33-206-01-0: RNCC: 5 | RNVC: 2

17 Feb 1983

5120-14-468-9945
Ro Outil De Montage

144689945
01-296: RNCC: 3 | RNVC: 2
85-693-9362: RNCC: 6 | RNVC: 9

30 Mar 1994

5120-14-338-4723
Spanner Wrench

143384723
C46335-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-514-0203
Open End Wrench

145140203
ENFD29159-32X35: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-331-4377
Hand Terminal Crimping Tool

143314377
809740: RNCC: 3 | RNVC: 2
85-679-8870: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-368-5057
Open End Wrench

143685057
235000-78: RNCC: 3 | RNVC: 2
TF10A32408: RNCC: 5 | RNVC: 2
85-689-7924: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-418-7976
Face Spanner Wrench Socket

144187976
M31-160: RNCC: 3 | RNVC: 2

16 Sep 1987

5120-14-329-3074
Cle A Panier

143293074
GSM196-010F74: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-427-7613
Spanner Wrench

144277613
NO PRIMARY REF14-427-7613: RNCC: 3 | RNVC: 2
E0949631: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-520-0968
Socket Wrench Extension

145200968
J.217RC: RNCC: 3 | RNVC: 2
3148510289502: RNCC: 5 | RNVC: 2

10 May 2000

5120-14-530-2088
Socket Head Screw Key

145302088
83SH.1/8: RNCC: 3 | RNVC: 2
3148511238547: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-447-8978
Bearing And Bushing Inserter And Remover

144478978
OU50711: RNCC: 3 | RNVC: 2
85-694-3183: RNCC: 6 | RNVC: 9

6 Jun 1991

5120-14-478-3302
Flat Tip Screwdriver

144783302
AGH.6,5X125: RNCC: 3 | RNVC: 2
1094229A00: RNCC: 5 | RNVC: 2
AGH.6,5X125: RNCC: 5 | RNVC: 2
3148510058436: RNCC: 5 | RNVC: 2
0005843: RNCC: 5 | RNVC: 9

25 Oct 1995

5120-14-483-1216
Socket Wrench Socket

144831216
RB.1/2: RNCC: 3 | RNVC: 2
3148510533407: RNCC: 5 | RNVC: 2
0053340: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-285-4507
Hand Cartridge Removing Hook

142854507
MG5-72: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-310-2935
Open End Wrench

143102935
44-22X27: RNCC: 3 | RNVC: 2
479932Q: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-246-7008
Open End Wrench

142467008
69-58: RNCC: 3 | RNVC: 2
4062-58: RNCC: 3 | RNVC: 9
E74301C58WWF: RNCC: 5 | RNVC: 1
3272670288959: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-574-4896
Socket Wrench Socket

145744896
NS.16A: RNCC: 3 | RNVC: 2
654709: RNCC: 5 | RNVC: 2
3148516547095: RNCC: 5 | RNVC: 2

23 Jan 2013

5120-14-392-5696
Mont Demo Outillage

143925696
25545980200: RNCC: 3 | RNVC: 2
255459802: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-368-3657
Hand Abrasive Wheel Dresser

143683657
3610-1: RNCC: 3 | RNVC: 2
3272670217188: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-489-1010
Socket Head Screw Key

144891010
82H.9: RNCC: 3 | RNVC: 2
3148511230916: RNCC: 5 | RNVC: 2
82H9: RNCC: 5 | RNVC: 2
235-2971: RNCC: 5 | RNVC: 2
0715 31 44: RNCC: 5 | RNVC: 2
SYQ5199: RNCC: 5 | RNVC: 2
0123091: RNCC: 5 | RNVC: 9
FACOM82H.9: RNCC: 5 | RNVC: 9

27 Jun 1997

5120-14-365-8672
Adjustable Wrench

143658672
113-2: RNCC: 3 | RNVC: 2

8 Oct 1980

5120-14-510-7143
Socket Wrench Socket

145107143
RTX.6: RNCC: 3 | RNVC: 2
0715 112 06: RNCC: 5 | RNVC: 2
RTX6: RNCC: 5 | RNVC: 9

9 Nov 1998

5120-14-032-0405
Screwdriver Bit

140320405
0-01197: RNCC: 3 | RNVC: 2
2739-6: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-210-9850
Socket Wrench Socket

142109850
J.10H: RNCC: 3 | RNVC: 2
3148510274201: RNCC: 5 | RNVC: 2
0713 121 110: RNCC: 5 | RNVC: 2
J10H: RNCC: 5 | RNVC: 2
1067021A00: RNCC: 5 | RNVC: 2
0027420: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-541-9356
Retaining Ring Pliers Set

145419356
VE.3: RNCC: 3 | RNVC: 2
3148517307759: RNCC: 5 | RNVC: 2

2 Jul 2004

5120-14-458-9630
Impact Type Bit Set And Handle Screwdriver

144589630
AMHM.1: RNCC: 3 | RNVC: 2

10 Nov 1992

5120-14-347-2977
Offset Screwdriver

143472977
ARZ.5,5: RNCC: 3 | RNVC: 2
RT6091: RNCC: 5 | RNVC: 2
3148510113203: RNCC: 5 | RNVC: 2
ARZ5-5: RNCC: 5 | RNVC: 2
0115346W00: RNCC: 5 | RNVC: 2
91535033: RNCC: 5 | RNVC: 2
FACOM ARZ-5,5: RNCC: 5 | RNVC: 2
0011320: RNCC: 5 | RNVC: 9
958 243 001 001: RNCC: 6 | RNVC: 9

19 Jan 1978

5120-14-553-5918
Socket Wrench Socket

145535918
J.19HLA: RNCC: 3 | RNVC: 2
3148510274034: RNCC: 5 | RNVC: 2

19 Apr 2007

5120-14-326-0184
Mechanical Puller Attachment

143260184
NO PRIMARY REF14-326-0184: RNCC: 3 | RNVC: 2
151933-1: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-435-0718
Lot Pose-Joint

144350718
853-201-911-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-461-2105
Cle Speciale

144612105
23MEFL312131303-REP35: RNCC: 3 | RNVC: 2
23MEFM312131303-REP35: RNCC: 3 | RNVC: 2
RAB0630: RNCC: 5 | RNVC: 2

2 Mar 1993

5120-14-220-6868
Socket Wrench Extension

142206868
J-210: RNCC: 3 | RNVC: 2
3272670218604: RNCC: 5 | RNVC: 2
J210: RNCC: 5 | RNVC: 2
74J210: RNCC: 5 | RNVC: 9
85-679-5940: RNCC: 6 | RNVC: 9

1 Jan 1965

5120-14-424-5716
Socket Wrench Socket

144245716
K-34A: RNCC: 3 | RNVC: 2
K.34A: RNCC: 3 | RNVC: 2
3148510293202: RNCC: 5 | RNVC: 2
K34A: RNCC: 5 | RNVC: 2
0029320: RNCC: 5 | RNVC: 9

1 Jun 1988

5120-14-274-5180
Matrice Outil A Ser

142745180
47824: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-434-8084
Bearing And Bushing Inserter And Remover

144348084
MI39245: RNCC: 3 | RNVC: 2
96157500: RNCC: 5 | RNVC: 2

4 Oct 1989

5120-14-531-7511
Casse-Ecrou

145317511
395.3: RNCC: 3 | RNVC: 2

12 Sep 2002

5120-14-210-9240
Tournevis Et Cle A

142109240
54610: RNCC: 3 | RNVC: 2
50594: RNCC: 5 | RNVC: 9
54610: RNCC: 5 | RNVC: 9
846073: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-220-5157
Tas Dextraction Dax

142205157
3160-95-33-040-1: RNCC: 3 | RNVC: 2
3160S95-33-040-1: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-423-2233
Ens Vis De Poussee

144232233
0747146: RNCC: 3 | RNVC: 2
SP.1734 D-12: RNCC: 5 | RNVC: 2
SP1734D-12: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-355-6918
Pince Extraction Ga

143556918
RT11970: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-349-4052

5120-14-446-9967
Spanner Wrench

144469967
7128J: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-14-546-4036
Socket Wrench Socket

145464036
0714 13 151: RNCC: 3 | RNVC: 2

30 Jun 2005

5120-14-501-5550
Outillage De Rampe

145015550
T60UT0034004: RNCC: 3 | RNVC: 2

4 Nov 1997

5120-14-281-8196
Croisillon

142818196
8810163000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-578-4357
Combination Box And Open End Wrench Set

145784357
440.JU17T: RNCC: 3 | RNVC: 2
3148518004978: RNCC: 5 | RNVC: 2
Y00013794: RNCC: 5 | RNVC: 2

28 Nov 2013

5120-14-218-6735

5120-14-569-0310
Mechanical Puller

145690310
F27354000-1: RNCC: 3 | RNVC: 2
F27354000: RNCC: 3 | RNVC: 9
F27354000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-265-0906
Cle Hydraulique

142650906
330A93-2000-00: RNCC: 3 | RNVC: 2
330A93-2000-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-343-9779
Wire Twister Pliers

143439779
GA311A: RNCC: 3 | RNVC: 2
85-689-2310: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-401-5646
Bearing Staking Installation Tool

144015646
350A93-3405-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-370-8135
Spanner Wrench

143708135
6254-57018: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-536-3678
Socket Head Screw Key

145363678
47211079: RNCC: 3 | RNVC: 2

29 Jul 2003

5120-14-274-7770
Flat Tip Screwdriver

142747770
E74-351-1-6X10X250R0NDE: RNCC: 2 | RNVC: 2
203-10: RNCC: 3 | RNVC: 2
T0101: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-373-8871
Screwdriver Bit Set And Handle

143738871
16299905: RNCC: 1 | RNVC: 2
65-3-01-044B00-000000-0000: RNCC: 3 | RNVC: 2
0039527K00: RNCC: 5 | RNVC: 2
16299905: RNCC: 5 | RNVC: 9

8 Dec 1981

5120-14-488-3155
Socket Head Screw Key

144883155
AZ.5,5X250: RNCC: 3 | RNVC: 2
3148510133935: RNCC: 5 | RNVC: 2
AZ5-5X250: RNCC: 5 | RNVC: 2
0013393: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-391-2064
Socket Wrench Socket

143912064
0055880: RNCC: 3 | RNVC: 2
SL1 1/4: RNCC: 3 | RNVC: 2
S-1"1/4L: RNCC: 5 | RNVC: 2
S.1"1/4L: RNCC: 5 | RNVC: 2
S1 1/4L: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-393-0272
Combination Box And Open End Wrench

143930272
41.11: RNCC: 3 | RNVC: 2
3148511013588: RNCC: 5 | RNVC: 2
41-11: RNCC: 5 | RNVC: 2
0184644C00: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-204-3010
Cle Speciale

142043010
M3-057: RNCC: 3 | RNVC: 2
M3-057: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-387-1918
De Montag Outillage

143871918
MHG233-41: RNCC: 3 | RNVC: 2
MHG233-41: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-283-1685
Cle Speciale

142831685
761-3M735P18: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-517-9416
Pliers

145179416
GS4-L.210: RNCC: 3 | RNVC: 2
1.70.0006: RNCC: 5 | RNVC: 2

19 Jan 2000

5120-14-576-6443
Mechanical Puller S

145766443
8816826001: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-541-0478
Combination Box And Open End Wrench

145410478
40R.18: RNCC: 3 | RNVC: 2
3148511011904: RNCC: 5 | RNVC: 2
40R.18: RNCC: 5 | RNVC: 2

7 May 2004

5120-14-239-7157
Poincon Boucle A Ax

142397157
2002: RNCC: 3 | RNVC: 2
2002: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-427-1483
Socket Head Screw Key

144271483
6252-54280: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-329-6392
Spanner Wrench

143296392
MHJ101-22: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-353-2449
Open End Wrench

143532449
NO PRIMARY REF14-353-2449: RNCC: 3 | RNVC: 2
19304345: RNCC: 5 | RNVC: 9

8 Dec 1978

5120-14-427-7614
Spanner Wrench

144277614
NO PRIMARY REF14-427-7614: RNCC: 3 | RNVC: 2
E0949632: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-270-8385
Spanner Wrench

142708385
D1553-4806: RNCC: 3 | RNVC: 2
D1553-4806: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-358-4688
Screwdriver Bit

143584688
EP.100: RNCC: 3 | RNVC: 2
EP.100: RNCC: 5 | RNVC: 2
3148510240503: RNCC: 5 | RNVC: 2
EP100: RNCC: 5 | RNVC: 2
162-6013: RNCC: 5 | RNVC: 2
EP0: RNCC: 5 | RNVC: 9
0024050: RNCC: 5 | RNVC: 9
FACOMEP.100: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-239-9613
Spanner Wrench

142399613
552-405MA083DET5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-440-5464
Cle

144405464
51978: RNCC: 3 | RNVC: 2
85-694-1112: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-315-0646
Pliers

143150646
188.20EG: RNCC: 3 | RNVC: 2
3148511433300: RNCC: 5 | RNVC: 2
0143330: RNCC: 5 | RNVC: 9
188-20CP: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-412-2975
Torque Wrench Adapter

144122975
MHB170-23: RNCC: 3 | RNVC: 2
MHB170-23: RNCC: 5 | RNVC: 2

8 Oct 1986

5120-14-222-6180
Socket Wrench Socket

142226180
J.7/16: RNCC: 3 | RNVC: 2
J-7/16: RNCC: 3 | RNVC: 2
J7-16: RNCC: 3 | RNVC: 2
3148510277202: RNCC: 5 | RNVC: 2
J7-16: RNCC: 5 | RNVC: 2
3272670231702: RNCC: 5 | RNVC: 2
91729309: RNCC: 5 | RNVC: 2
0027720: RNCC: 5 | RNVC: 9
74J7-16: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-228-0795
Bloc De Pre-Sertiss

142280795
RMPS5F12X1-2M: RNCC: 3 | RNVC: 2
RMPS4F9-5X12M: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-231-7335
Poincon Pour Connec

142317335
8459-130N2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-354-6756
Collier Leve Piston

143546756
25545957700: RNCC: 3 | RNVC: 2
255459577: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-325-3441

5120-14-334-8142

5120-14-285-6269

5120-14-284-5092
Socket Wrench Extension

142845092
T0120BBF5APL12: RNCC: 3 | RNVC: 2
403665T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-422-2428
Socket Wrench Spanner Attachment

144222428
0377-54517: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-530-2035
Screwdriver Bit Holder

145302035
EF.6P3: RNCC: 3 | RNVC: 2
3148510229201: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-506-7634
De Montage Outil

145067634
M11880: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-366-6436
Terminal Crimping Tool Contact Positioner

143666436
11951: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-200-9857
Open End Wrench

142009857
41W01024005: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-237-9803
Open End Wrench

142379803
DI2602: RNCC: 3 | RNVC: 2
0000330570: RNCC: 5 | RNVC: 2
0000330570: RNCC: 5 | RNVC: 9
330570: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-482-1450
Spanner Wrench

144821450
PR46616: RNCC: 3 | RNVC: 2

20 Jun 1996

5120-14-391-8439
Socket Head Screw Key

143918439
0S20289: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-321-8545
Manchon Equipe

143218545
6521774: RNCC: 3 | RNVC: 2
6521774: RNCC: 5 | RNVC: 1
85-626-7232: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-204-3017
Cle Speciale

142043017
M6-033: RNCC: 3 | RNVC: 2
M6-033: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-204-1028
Outil De Montage Et

142041028
3130S95-11-008: RNCC: 3 | RNVC: 2
4587: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-360-0554
Teton Cle Allumeur-

143600554
053W41-542452C: RNCC: 3 | RNVC: 2
0542452C00: RNCC: 5 | RNVC: 2

31 Oct 1979

5120-14-445-3751
A Creneaux Cle

144453751
94AM094: RNCC: 3 | RNVC: 2

12 Feb 1991

5120-14-342-3608
Open End Wrench

143423608
RT20772: RNCC: 3 | RNVC: 2
1703052: RNCC: 5 | RNVC: 2
DA1011: RNCC: 5 | RNVC: 2
85-653-7010: RNCC: 6 | RNVC: 9
99-619-5185: RNCC: 6 | RNVC: 9

14 Apr 1977

5120-14-352-5463
Wrench Extension Handle

143525463
FH152-941: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-357-9931
Spanner Wrench

143579931
MHG303-24: RNCC: 3 | RNVC: 2
MHG303-24: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-329-6335
Open End Wrench

143296335
M31-060: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-462-8621
Face Spanner Wrench Socket

144628621
Q46564: RNCC: 3 | RNVC: 2
85-694-7983: RNCC: 6 | RNVC: 9

5 May 1993

5120-14-356-1005
Socket Head Screw Key

143561005
9970-121-287: RNCC: 3 | RNVC: 2
85-689-8256: RNCC: 6 | RNVC: 9

5 Apr 1979

5120-14-431-2688
Bearing And Bushing Inserter

144312688
3160S95-68-105: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-338-4801
Cone De Montage

143384801
S16-0607-0691: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-485-8818
Open End Wrench

144858818
K7739-12109-0BAX1BA: RNCC: 3 | RNVC: 2
12109-0BAX1BA: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-458-6726
Flat Tip Screwdriver

144586726
NO PRIMARY REF14-458-6726: RNCC: 3 | RNVC: 2
0003950: RNCC: 5 | RNVC: 2
ACH.8X125: RNCC: 5 | RNVC: 2
ACH8X125: RNCC: 5 | RNVC: 2
H24176: RNCC: 5 | RNVC: 2
91638795: RNCC: 5 | RNVC: 9
ACH.8X125: RNCC: 5 | RNVC: 9

29 Oct 1992

5120-14-412-2974
Torque Wrench Adapter

144122974
MHB170-22: RNCC: 3 | RNVC: 2
MHB170-22: RNCC: 5 | RNVC: 2

8 Oct 1986

5120-14-496-0047
Cle

144960047
NO PRIMARY REF14-496-0047: RNCC: 3 | RNVC: 2
74-B3: RNCC: 5 | RNVC: 9
F300 0T 020 7499: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-335-7266
Socket Head Screw Key

143357266
915-1-95-23: RNCC: 3 | RNVC: 2

30 Jun 1976

5120-14-428-8844
Outil Cont Vrillage

144288844
350A94-3410-00: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-283-1393
Appareil De Serrage

142831393
T0120BBC13APL1REP1A6ET9A16: RNCC: 3 | RNVC: 2
19379T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-501-7799
Socket Wrench Extension

145017799
NO PRIMARY REF14-501-7799: RNCC: 3 | RNVC: 2
1J 004 01 01115: RNCC: 5 | RNVC: 9
241 B 00309 015: RNCC: 5 | RNVC: 9
F300 0T 000 1025: RNCC: 6 | RNVC: 9

10 Nov 1997

5120-14-412-7740
Couronne

144127740
NO PRIMARY REF14-412-7740: RNCC: 3 | RNVC: 2
H140AMV201M: RNCC: 5 | RNVC: 9

5 Nov 1986

5120-14-571-6173
Box Wrench

145716173
51A.36: RNCC: 3 | RNVC: 2
3148511082379: RNCC: 5 | RNVC: 2
108237: RNCC: 5 | RNVC: 2

13 Apr 2012

5120-14-490-8802
Aiguill

144908802
4066 213 400 001: RNCC: 3 | RNVC: 2
F300 0T 000 5074: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-347-4130
Poussoi Balai Outil

143474130
NO PRIMARY REF14-347-4130: RNCC: 3 | RNVC: 2
60C2-304M1: RNCC: 5 | RNVC: 9

1 Mar 1978

5120-14-454-9411
Socket Head Screw Key

144549411
84E.050X35: RNCC: 3 | RNVC: 2
3148511254035: RNCC: 5 | RNVC: 2
SYQ3055: RNCC: 5 | RNVC: 2
0125403: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-264-9604
Spanner Wrench

142649604
0358-78: RNCC: 3 | RNVC: 2
RA358: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-514-6918
Screwdriver Bit

145146918
379017A: RNCC: 3 | RNVC: 2

9 Jun 1999

5120-14-040-7356
Fixed Open End Wrench Set

140407356
000144003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-437-7291
Tournevis A Frapper

144377291
269: RNCC: 3 | RNVC: 2
3272670230767: RNCC: 5 | RNVC: 2

14 Feb 1990

5120-14-477-4342
Extracteur Bouton P

144774342
27895: RNCC: 3 | RNVC: 2

30 Aug 1995

5120-14-385-4743
A Collier Alene

143854743
899: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-439-0283
Bearing And Bushing Inserter

144390283
365A93-3451-00: RNCC: 3 | RNVC: 2
85-694-1508: RNCC: 6 | RNVC: 9

19 Apr 1990

5120-14-317-7968
Spanner Wrench

143177968
NO PRIMARY REF14-317-7968: RNCC: 3 | RNVC: 2
842868-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-571-3798
Socket Wrench Ratchet Attachment

145713798
J.151RN: RNCC: 3 | RNVC: 2

20 Mar 2012

5120-14-261-8266
Boite A Jauges

142618266
T34BBH3B: RNCC: 3 | RNVC: 2
T0553BBH3B: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-259-9273

5120-14-363-2750

5120-14-481-3143
Spanner Wrench

144813143
10441523: RNCC: 3 | RNVC: 2

1 May 1996

5120-14-304-5442
Electronic Equipment Alignment Tool

143045442
62000475: RNCC: 3 | RNVC: 2
3104018: RNCC: 3 | RNVC: 2
3104018: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-285-4477
Open End Wrench

142854477
40546: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-286-7829

5120-14-261-7672

5120-14-232-7908
Spanner Wrench

142327908
NO PRIMARY REF14-232-7908: RNCC: 3 | RNVC: 2
B4C309713: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-288-6995
Bague De Montage

142886995
D1553-4840: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-384-3359
Lot Repar Cle Cliqu

143843359
RKRF720: RNCC: 3 | RNVC: 2
RKRF720: RNCC: 5 | RNVC: 2
85-692-2084: RNCC: 6 | RNVC: 9

4 May 1983

5120-14-441-2208
Face Spanner Wrench Socket

144412208
6801V32-2444-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-493-8368
Buse

144938368
NO PRIMARY REF14-493-8368: RNCC: 3 | RNVC: 2
134-509-903: RNCC: 5 | RNVC: 9
F300 0T 014 2128: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-385-5399
Manivelle

143855399
NO PRIMARY REF14-385-5399: RNCC: 3 | RNVC: 2
709057: RNCC: 5 | RNVC: 9

26 Jul 1983

5120-14-486-5715
Cle

144865715
RT22438: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-261-2555
Bearing And Bushing Inserter And Remover

142612555
8810498000: RNCC: 3 | RNVC: 2
85-648-1590: RNCC: 6 | RNVC: 9

1 Jan 1970

5120-14-385-3457
Hand Crank

143853457
6804P32-4013-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-443-6325
Socle Emmanchement

144436325
NO PRIMARY REF14-443-6325: RNCC: 3 | RNVC: 2
OU134354: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-300-9665
Bearing Staking Installation Tool

143009665
341A93-3516-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-438-6835
Projectile Holding Tool

144386835
321A95-0033-00: RNCC: 3 | RNVC: 2

28 Mar 1990

5120-14-272-3703
Open End Wrench

142723703
E74302R5-6BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-428-4918
De Montage Obus

144284918
46AM057-00-0015: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-301-0980
Bearing Staking Installation Tool

143010980
330A98-3437-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-429-8223
Screwdriver Bit

144298223
EX.108: RNCC: 3 | RNVC: 2
3148510257983: RNCC: 5 | RNVC: 2
1059123G00: RNCC: 5 | RNVC: 2
162-7678: RNCC: 5 | RNVC: 2
0025798: RNCC: 5 | RNVC: 9
FACOMEX.108: RNCC: 5 | RNVC: 9

14 Feb 1989

5120-14-550-5819
Socket Wrench Socket

145505819
270M114-00: RNCC: 3 | RNVC: 2

28 Jun 2006

5120-14-393-0280
Combination Box And Open End Wrench

143930280
41.19: RNCC: 3 | RNVC: 2
3148511013663: RNCC: 5 | RNVC: 2
41-19: RNCC: 5 | RNVC: 2
0184652N00: RNCC: 5 | RNVC: 2
91564517: RNCC: 5 | RNVC: 2
0101366: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-393-5634
Open End Wrench

143935634
44-3-4X7-8CP: RNCC: 3 | RNVC: 2
44-3/4X7/8CP: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-453-7077
Open End Wrench

144537077
F7987 3099-88: RNCC: 3 | RNVC: 2
CLEF NR2 CP49A: RNCC: 5 | RNVC: 2
3099-88: RNCC: 5 | RNVC: 9

5 Mar 1992

5120-14-442-8356
5 Lames Jeu

144428356
V.750A1: RNCC: 3 | RNVC: 2
V750A1: RNCC: 5 | RNVC: 2
3148510778723: RNCC: 5 | RNVC: 2
0077872: RNCC: 5 | RNVC: 9

7 Nov 1990

5120-14-443-3382
Ressort A Cintrer

144433382
2510118: RNCC: 3 | RNVC: 2

16 Nov 1990

5120-14-516-8028
Poussoir

145168028
5001008725: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-313-7236
Faux Mors

143137236
C47048: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-397-4475

5120-14-466-4853
Mechanical Puller Adapter

144664853
1079426X00: RNCC: 3 | RNVC: 2

15 Nov 1993

5120-14-229-5401
Doigt En Acier

142295401
4318436: RNCC: 3 | RNVC: 2
4318436: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-286-7843

5120-14-032-1414

5120-14-201-2186
Socket Wrench Socket

142012186
0055740: RNCC: 3 | RNVC: 2
S3-4L: RNCC: 5 | RNVC: 2
S.3/4L: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-245-8348
Cle Speciale

142458348
NO PRIMARY REF14-245-8348: RNCC: 3 | RNVC: 2
D19119: RNCC: 5 | RNVC: 2
920000: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-266-5198
Faux Mors

142665198
PR47178: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-359-2340
Combination Open End And Spanner Wrench

143592340
Y050-001: RNCC: 3 | RNVC: 2

2 Oct 1979

5120-14-528-3931
Spanner Wrench

145283931
0003-0347-030: RNCC: 3 | RNVC: 2
SYB4422: RNCC: 5 | RNVC: 2

24 Jan 2002

5120-14-450-4035
Mise Ligne Support

144504035
NO PRIMARY REF14-450-4035: RNCC: 3 | RNVC: 2
BL53981: RNCC: 5 | RNVC: 9

3 Oct 1991

5120-14-297-7685
Spanner Wrench

142977685
6800-2208: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-443-6321
Broche De Controle

144436321
NO PRIMARY REF14-443-6321: RNCC: 3 | RNVC: 2
OU134140: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-431-4901
Manchon Emmanchemen

144314901
BFP00627: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-428-5264
Position Detrompeur

144285264
MJK3464611: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-236-4568

5120-14-290-7508
Pince A Degoupiller

142907508
157: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-347-1217
Socket Wrench Socket

143471217
NS.8: RNCC: 3 | RNVC: 2
NS8: RNCC: 5 | RNVC: 2
3148510420004: RNCC: 5 | RNVC: 2
0042000: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-249-9436
Socket Wrench Socket

142499436
M.60: RNCC: 3 | RNVC: 2
65M60: RNCC: 3 | RNVC: 2
T60: RNCC: 3 | RNVC: 9
3148510317908: RNCC: 5 | RNVC: 2
M60: RNCC: 5 | RNVC: 2
0031790: RNCC: 5 | RNVC: 9
DEMT60: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-244-8559
Open End Wrench

142448559
20-12X12: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-383-2752
Face Spanner Wrench Socket

143832752
363A40-300000-00A1: RNCC: 3 | RNVC: 2
363A40-300000-00A1: RNCC: 5 | RNVC: 2

17 Mar 1983

5120-14-231-8455
Open End Wrench

142318455
9970-115-306: RNCC: 3 | RNVC: 2
8683: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-485-6786
Mechanical Puller Adapter

144856786
58015-051-1: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-466-5889
Spanner Wrench

144665889
851-400-049-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-438-7422
Flat Tip Screwdriver

144387422
AY.2,5X75: RNCC: 3 | RNVC: 2
AY.2,5X75: RNCC: 5 | RNVC: 2
3148510129754: RNCC: 5 | RNVC: 2
91629576: RNCC: 5 | RNVC: 2
162-7735: RNCC: 5 | RNVC: 2
0236964T00: RNCC: 5 | RNVC: 2
0012975: RNCC: 5 | RNVC: 9
FACOMAY.2,5X75: RNCC: 5 | RNVC: 9

3 Apr 1990

5120-14-233-0712
Verin A Vis

142330712
6725-25: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-364-1522
Socket Head Screw Key

143641522
82.5-32: RNCC: 3 | RNVC: 2
0123540: RNCC: 5 | RNVC: 2
82-5-32: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-384-3411
Spanner Wrench

143843411
75210-2: RNCC: 3 | RNVC: 2
8375210-2: RNCC: 5 | RNVC: 2
85-598-3881: RNCC: 6 | RNVC: 9

4 May 1983

5120-14-274-1061
Detent Handling Tool

142741061
8810267007: RNCC: 3 | RNVC: 2
800-02-427-07: RNCC: 5 | RNVC: 2
8000242707: RNCC: 5 | RNVC: 2
881-0-267-007: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-440-8017
Spanner Wrench

144408017
Y075-060-000A: RNCC: 3 | RNVC: 2

25 Jul 1990

5120-14-456-6483
Combination Box And Open End Wrench

144566483
39.JE 10: RNCC: 3 | RNVC: 2
3148515282300: RNCC: 5 | RNVC: 2
104-9236: RNCC: 5 | RNVC: 2
FACOM39.JE 10: RNCC: 5 | RNVC: 9

16 Jul 1992

5120-14-421-6352
Socket Head Screw Key

144216352
0372-42-10051: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-488-4867
Retaining Ring Pliers Set

144884867
470.MT: RNCC: 3 | RNVC: 2
470-MT: RNCC: 5 | RNVC: 2
3148515415104: RNCC: 5 | RNVC: 2
0541510: RNCC: 5 | RNVC: 9

14 May 1997

5120-14-041-8331
Spanner Wrench

140418331
80795-12-19: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-234-3598
Bague Conique Monta

142343598
202463: RNCC: 3 | RNVC: 2
FL202463: RNCC: 5 | RNVC: 2

1 Jan 1967

142602340
M20-021: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-232-9384
Open End Wrench

142329384
51790: RNCC: 3 | RNVC: 2
15051790: RNCC: 5 | RNVC: 2
160510790: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-369-6982
Socket Head Screw Key

143696982
174-815: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-399-3991
Spanner Wrench

143993991
4D00830: RNCC: 3 | RNVC: 2
4D00830: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-442-3503
Combination Lock Reset Key

144423503
0107574: RNCC: 3 | RNVC: 2

12 Oct 1990

5120-14-470-3500
Socket Head Screw Key

144703500
45820231: RNCC: 3 | RNVC: 9

15 Jun 1994

5120-14-552-4402
Socket Wrench Socket

145524402
S639V3030228: RNCC: 3 | RNVC: 2

3 Jan 2007

5120-14-393-8795
Poussoir Outil

143938795
NO PRIMARY REF14-393-8795: RNCC: 3 | RNVC: 2
OU140300: RNCC: 5 | RNVC: 9

21 Feb 1996

5120-14-463-6929
Socket Wrench Socket

144636929
3511 191 92851: RNCC: 3 | RNVC: 2
3511-191-92851: RNCC: 5 | RNVC: 2

23 Jun 1993

5120-14-488-4026
Quick Adjusting Screw Clamp

144884026
0889-78: RNCC: 3 | RNVC: 2
85-695-3912: RNCC: 6 | RNVC: 9

7 May 1997

5120-14-550-4124
Combination Box And Open End Wrench

145504124
885009: RNCC: 3 | RNVC: 2
885009-1: RNCC: 5 | RNVC: 2

19 Jun 2006

5120-14-248-3521
Cle

5120-14-248-5793
Cle De Reglage Vern

5120-14-450-8958
Graissage Montage

144508958
MMG060-62: RNCC: 3 | RNVC: 2
MMG060-62: RNCC: 5 | RNVC: 2

23 Oct 1991

5120-14-497-4392
Tournevis

144974392
NO PRIMARY REF14-497-4392: RNCC: 3 | RNVC: 2
FZAC5-5X100: RNCC: 5 | RNVC: 9
F300 0T 023 1807: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-377-8625
Cable Type Ratchet Lever Puller

143778625
350AVF24: RNCC: 3 | RNVC: 2
85-692-1192: RNCC: 6 | RNVC: 9

10 Jun 1982

5120-14-463-8969
Spanner Wrench

144638969
7-010753-3: RNCC: 3 | RNVC: 2
7-010753-3: RNCC: 5 | RNVC: 9

5 Jul 1993

5120-14-477-5030
Screwdriver Bit

144775030
EH.101,5: RNCC: 3 | RNVC: 2
3148510233604: RNCC: 5 | RNVC: 2
1068374E00: RNCC: 5 | RNVC: 2
0023360: RNCC: 5 | RNVC: 9

7 Sep 1995

5120-14-456-7181
Sheet Metalworking Dolly Block

144567181
853-640-006-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-383-6517
Vise Jaw Caps

143836517
S10-0150-0241: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-210-9866
Socket Wrench Handle

142109866
J.110: RNCC: 3 | RNVC: 2
3272670216228: RNCC: 5 | RNVC: 2
J110: RNCC: 5 | RNVC: 2
91493216: RNCC: 5 | RNVC: 2
3059000793: RNCC: 5 | RNVC: 2
0028540: RNCC: 5 | RNVC: 2
J110: RNCC: 5 | RNVC: 2
85-101-2024: RNCC: 6 | RNVC: 9

1 Jan 1964

5120-14-424-1154
Socket Head Screw Key

144241154
89.6: RNCC: 3 | RNVC: 2
3148511267448: RNCC: 5 | RNVC: 2
235-3772: RNCC: 5 | RNVC: 2
0695 177 950: RNCC: 5 | RNVC: 2
0126744: RNCC: 5 | RNVC: 9
FACOM89.6: RNCC: 5 | RNVC: 9

17 May 1988

5120-14-477-4426
Flat Tip Screwdriver

144774426
NO PRIMARY REF14-477-4426: RNCC: 3 | RNVC: 2
0003843: RNCC: 5 | RNVC: 2
AC.4X125: RNCC: 5 | RNVC: 2
AC4X125: RNCC: 5 | RNVC: 2

30 Aug 1995

5120-14-287-1204
Screwdriver Bit

142871204
NO PRIMARY REF14-287-1204: RNCC: 3 | RNVC: 2
91630246: RNCC: 5 | RNVC: 2
0023961: RNCC: 5 | RNVC: 2
ENT.311: RNCC: 5 | RNVC: 2
ENT311: RNCC: 5 | RNVC: 2
ET11: RNCC: 5 | RNVC: 2
3272670215931: RNCC: 5 | RNVC: 2
SE-11: RNCC: 5 | RNVC: 2
SE11: RNCC: 5 | RNVC: 2
91481366: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-423-2213
Poignee Pvc

144232213
0747117: RNCC: 3 | RNVC: 2
SP.1733 D-7: RNCC: 5 | RNVC: 2
SP1733D-7: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-474-9587
Demonte Obus De Val

144749587
S4049-2: RNCC: 3 | RNVC: 2

15 Mar 1995

5120-14-222-8278
Cle Speciale

142228278
NO PRIMARY REF14-222-8278: RNCC: 3 | RNVC: 2
X21724: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-467-8904
Electrical Contact Inserter And Remover

144678904
001112 100 25: RNCC: 3 | RNVC: 2
00111210025: RNCC: 5 | RNVC: 2
AB/5/8/5227: RNCC: 5 | RNVC: 2
CM 10130: RNCC: 5 | RNVC: 2
001112 100 25: RNCC: 5 | RNVC: 2

2 Feb 1994

5120-14-560-6321
Screw Thread Insert Inserter

145606321
64771: RNCC: 3 | RNVC: 2

6 May 2009

5120-14-401-8564
Emmancht Coussinets

144018564
24545901700: RNCC: 3 | RNVC: 2
245459017: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-224-7475

5120-14-565-2585
Socket Wrench Extension

145652585
S.217RC: RNCC: 3 | RNVC: 2
A251403000152: RNCC: 5 | RNVC: 2

2 Aug 2010

5120-14-427-1481
Socket Head Screw Key

144271481
6252-54278: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-437-8136
Bille Montage Guide

144378136
P4-12: RNCC: 3 | RNVC: 2
P4-12: RNCC: 5 | RNVC: 9

21 Feb 1990

5120-14-338-4798
Mise En Forme Cone

143384798
S16-0605-1142: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-477-2109
Tracage Gabarit

144772109
41100CRB13A1-13A2: RNCC: 3 | RNVC: 2
41100CRB13A1-A2: RNCC: 5 | RNVC: 2
5120AA2075436: RNCC: 6 | RNVC: 9

2 Aug 1995

5120-14-284-1932

5120-14-325-4756
Positio Serti Conta

143254756
8340-766: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-380-4599
Cle Pour Verrouilla

143804599
M20-4901-0435-00: RNCC: 3 | RNVC: 2

29 Nov 1982

5120-14-572-6174
Telescoping Pole

145726174
332A92-1402-01: RNCC: 3 | RNVC: 2
332A92140201: RNCC: 5 | RNVC: 2

17 Jul 2012

5120-14-434-3682
De Serrage Cle

144343682
NO PRIMARY REF14-434-3682: RNCC: 3 | RNVC: 2
484515: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-226-3141
Extracteur Roulemen

142263141
60290-02-050M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-463-9775
Seal Inserter And Remover

144639775
854-500-327-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-201-7122
Pliers

142017122
E73-150-200: RNCC: 2 | RNVC: 2
239-0: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-345-5520
Verrou Outil Montag

143455520
P3 1-2T2: RNCC: 3 | RNVC: 2
85-689-2506: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-330-7269
Douille Guide Joint

143307269
4X616: RNCC: 3 | RNVC: 2
85-100-4953: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-440-8056
Spanner Wrench

144408056
Y075-042-100B: RNCC: 3 | RNVC: 2

25 Jul 1990

5120-14-241-4487
Regleur Ressort Equ

142414487
10-019: RNCC: 3 | RNVC: 2
0UTF53: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-460-5416
Guide Pour Bague

144605416
NO PRIMARY REF14-460-5416: RNCC: 3 | RNVC: 2
BLB84: RNCC: 5 | RNVC: 9
85-694-5624: RNCC: 6 | RNVC: 9

27 Jan 1993

5120-14-314-7399
Outil Demontage Dos

143147399
MRD0S101-007: RNCC: 3 | RNVC: 9

1 Jan 1974

5120-14-319-6879
Socket Wrench Crowfoot Attachment

143196879
G1-15-637-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-419-9199
Spanner Wrench

144199199
0497-206000: RNCC: 3 | RNVC: 2
O497-206000: RNCC: 5 | RNVC: 2

10 Nov 1987

5120-14-349-1700
Cale De Reglage

143491700
341A94-2712-02: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-232-2175
Valve Spring Lifter

142322175
NO PRIMARY REF14-232-2175: RNCC: 3 | RNVC: 2
2708: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-401-9144
Tap And Reamer Wrench

144019144
E66130 N8: RNCC: 2 | RNVC: 2

13 Jun 1985

5120-14-040-7377
Swivel Knob Jeweler's Screwdriver Set

140407377
000164003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-262-3047
Cle A Bequille

142623047
PR46077: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-384-5513
Face Spanner Wrench Socket

143845513
226441: RNCC: 3 | RNVC: 2
00063052: RNCC: 5 | RNVC: 2
063052: RNCC: 5 | RNVC: 2

2 Jun 1983

5120-14-576-9017
Mechanical Puller

145769017
F27372000-1: RNCC: 3 | RNVC: 2

22 Jul 2013

5120-14-201-2305
Socket Wrench Handle Bar

142012305
160.6: RNCC: 3 | RNVC: 2
3059000064: RNCC: 5 | RNVC: 2
160-6: RNCC: 5 | RNVC: 2
3148511391006: RNCC: 5 | RNVC: 2
35093D00: RNCC: 5 | RNVC: 2
91489189: RNCC: 5 | RNVC: 2
3509100: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-214-7236
Flat Tip Screwdriver

142147236
V4N00792: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-331-0293
Flat Tip Screwdriver

143310293
50441: RNCC: 3 | RNVC: 2
50441: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-482-1448
Spanner Wrench

144821448
PR46612: RNCC: 3 | RNVC: 2

20 Jun 1996

5120-14-515-1505
Socket Wrench Screwdriver Attachment

145151505
ENFD6519-D24X85: RNCC: 3 | RNVC: 2
ENFD6519D24X85: RNCC: 3 | RNVC: 2

8 Jul 1999

5120-14-550-9731
Flat Tip Screwdriver

145509731
TB-12M250: RNCC: 3 | RNVC: 2

7 Aug 2006

5120-14-467-1353
Bague Outillage

144671353
37M008-01-2: RNCC: 3 | RNVC: 2
85-693-7844: RNCC: 6 | RNVC: 9

16 Dec 1993

5120-14-463-9763
Metallique Jet

144639763
854-500-306-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-424-5477
Socket Wrench Socket

144245477
8-0129ZZ: RNCC: 3 | RNVC: 2
9764-87: RNCC: 5 | RNVC: 2
9409764870: RNCC: 5 | RNVC: 2

27 May 1988

5120-14-479-1323
Face Spanner Wrench Socket

144791323
888-355-400-1: RNCC: 3 | RNVC: 2

13 Dec 1995

5120-14-376-2289
Positionneur Segmen

143762289
NO PRIMARY REF14-376-2289: RNCC: 3 | RNVC: 2
0U133375: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-260-3548
Tas Montage De Filt

142603548
3130-95-60-030: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-262-3131
Outil Maintien Pris

142623131
NO PRIMARY REF14-262-3131: RNCC: 3 | RNVC: 2
175162: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-304-6476
Mandrin Porte Lames

143046476
TR-40: RNCC: 3 | RNVC: 2
TR40: RNCC: 3 | RNVC: 2
3272670224407: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-348-5082
Couronne Extracteur

143485082
NO PRIMARY REF14-348-5082: RNCC: 3 | RNVC: 2
RT7328-1: RNCC: 5 | RNVC: 9

29 Mar 1978

5120-14-491-3830
Cle Emb

144913830
1142: RNCC: 3 | RNVC: 2
F300 0T 002 6139: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-569-2993
Aligning Punch

145692993
S48670: RNCC: 3 | RNVC: 2

1 Sep 2011

5120-14-375-8484

5120-14-223-3004

5120-14-333-7531

5120-14-427-8301
Screwdriver Bit

144278301
0023936: RNCC: 3 | RNVC: 2
ENT.205/16: RNCC: 5 | RNVC: 2
ENT205/16: RNCC: 5 | RNVC: 2

16 Nov 1988

5120-14-518-0232
Six Point Tip Screwdriver

145180232
ENFD6576-15X80: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-399-7515
Socket Head Screw Key Blade

143997515
M4Z7101909402: RNCC: 3 | RNVC: 2

14 Mar 1985

5120-14-368-6869
Spanner Wrench

143686869
301A99350: RNCC: 3 | RNVC: 2
91379322: RNCC: 5 | RNVC: 2
301A99350: RNCC: 5 | RNVC: 2
300A99350: RNCC: 5 | RNVC: 9
301A99350: RNCC: 5 | RNVC: 9
301A99350: RNCC: 5 | RNVC: 9

10 Mar 1981

5120-14-483-1204
Fixed Open End Wrench Set

144831204
44.JE6: RNCC: 3 | RNVC: 2
530200: RNCC: 5 | RNVC: 2

9 Aug 1996

5120-14-551-1791
Socket Wrench Socket

145511791
3148516547170: RNCC: 3 | RNVC: 2
NS.17A: RNCC: 3 | RNVC: 2

1 Sep 2006

5120-14-422-2211
Spanner Wrench

144222211
0497-200000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-247-9645
Poignee Cle A Douil

142479645
RT20562: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-374-0886
Etau Cle

143740886
UHC301-43: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-562-6301
Seal Inserter

145626301
010-444-00826-102: RNCC: 3 | RNVC: 2

10 Nov 2009

5120-14-286-1109
Jeu De Cles Cannele

142861109
NO PRIMARY REF14-286-1109: RNCC: 3 | RNVC: 2
124320: RNCC: 5 | RNVC: 9
00-542-4631: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-226-3123
Manchon Special

142263123
60290-01-400M12: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-387-5011
Outilla Regl Conver

143875011
915-4-96-230: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-378-5138
Tube Packing Ring Installing Tool

143785138
6801J33-2041-20: RNCC: 3 | RNVC: 2
6801360A33-2041-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-385-3491
Out Mise En Pressio

143853491
6810P32-6003-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-210-9817
Retaining Ring Pliers

142109817
NO PRIMARY REF14-210-9817: RNCC: 3 | RNVC: 2
179-14: RNCC: 5 | RNVC: 2
91634513: RNCC: 5 | RNVC: 2
095338D: RNCC: 5 | RNVC: 2
91453608: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-545-5608
Tap And Reamer Wrench

145455608
CD-38200: RNCC: 3 | RNVC: 2

20 Apr 2005

5120-14-313-7282
Cone Mise En Forme

143137282
S16-0605-0661: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-032-0961
Tas De Maintien

140320961
341A93-3533-20: RNCC: 3 | RNVC: 2

5 Jul 1980

Load More Results