What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 89 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 89 of 110

5120-14-457-3001
Socket Head Screw Key

144573001
66-P10: RNCC: 3 | RNVC: 2
66P10: RNCC: 3 | RNVC: 2
89T.10: RNCC: 3 | RNVC: 2
0126920: RNCC: 3 | RNVC: 2
3272670217782: RNCC: 5 | RNVC: 2

25 Aug 1992

5120-14-317-7966
Spanner Wrench

143177966
NO PRIMARY REF14-317-7966: RNCC: 3 | RNVC: 2
842866-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-333-3877
Flasque Machoir Ava

143333877
0070-108: RNCC: 3 | RNVC: 2
0070-901: RNCC: 5 | RNVC: 2
1108: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-564-5402
Pliers

145645402
CR.D1: RNCC: 3 | RNVC: 2
695439: RNCC: 5 | RNVC: 2

5 May 2010

5120-14-491-0211
Outil

144910211
4602 010 800 006: RNCC: 3 | RNVC: 2
F300 0T 001 1006: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-553-2754
Out Virole Chargeur

145532754
037654: RNCC: 3 | RNVC: 2
37654: RNCC: 5 | RNVC: 2

20 Mar 2007

5120-14-422-2219
Electrical Contact Inserter And Remover

144222219
0499-207000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-307-4729
Pliers

143074729
595T: RNCC: 3 | RNVC: 9
MUL595T: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-370-4906
Reglage Aiguille

143704906
MKM0436200: RNCC: 3 | RNVC: 2
MKM0436200: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-529-2694
Cross Tip Screwdriver

145292694
ADH.2X100: RNCC: 3 | RNVC: 2
3148510046525: RNCC: 5 | RNVC: 2

20 Mar 2002

5120-14-516-9030
Fixed Open End Wrench Set

145169030
34.JE9: RNCC: 3 | RNVC: 2

20 Oct 1999

5120-14-472-9737
Spanner Wrench

144729737
4317594: RNCC: 3 | RNVC: 2

23 Nov 1994

5120-14-549-2473
Socket Wrench Extension

145492473
NJ.210A: RNCC: 3 | RNVC: 2

14 Mar 2006

5120-14-479-7070
Open End Wrench

144797070
44.14X15: RNCC: 3 | RNVC: 2
3148511024010: RNCC: 5 | RNVC: 2
0179497E00: RNCC: 5 | RNVC: 2
0102401: RNCC: 5 | RNVC: 9

31 Jan 1996

5120-14-538-7878
Spanner Wrench

145387878
NGM0011040382535: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-573-4926
Spanner Wrench

145734926
414152: RNCC: 3 | RNVC: 9

16 Oct 2012

5120-14-326-8379
Outil Demont Rotor

143268379
4-108-9076: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-416-6448
Socket Head Screw Key

144166448
27402590-5: RNCC: 3 | RNVC: 2

23 Jun 1987

5120-14-210-5462
Offset Screwdriver

142105462
APZ.C: RNCC: 3 | RNVC: 2
3148510096407: RNCC: 5 | RNVC: 2
APZC: RNCC: 5 | RNVC: 2
0009640: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-490-6848
Drill

144906848
240 D 01006 000: RNCC: 3 | RNVC: 2
F300 0T 000 0952: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-357-3409
Spanner Wrench

143573409
E74-323-160A185: RNCC: 2 | RNVC: 2

7 Jun 1979

5120-14-417-0123
Spanner Wrench

144170123
J05107-03S116: RNCC: 3 | RNVC: 2
J05916-01S111: RNCC: 3 | RNVC: 2
J05107-03-0000S116: RNCC: 5 | RNVC: 2

25 Jun 1987

5120-14-201-9937
Screwdriver Bit

142019937
S-261: RNCC: 3 | RNVC: 2
S261: RNCC: 3 | RNVC: 2
3272670299634: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-537-4385
Bearing And Bushing Inserter

145374385
350A93-3320-00: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-201-3943
Flat Tip Screwdriver

142013943
821-125X4: RNCC: 3 | RNVC: 9

1 Jan 1962

5120-14-371-4138
Spanner Wrench

143714138
6254-57061: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-450-5253
Hand Armament Subsystem Carrier

144505253
325406-02: RNCC: 3 | RNVC: 2
325406-02: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-202-0371
Blacksmith's Top Swage

142020371
3831-40EMMANCHE: RNCC: 3 | RNVC: 2
M0B17-40EC: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-475-4493
Bearing Staking Installation Tool

144754493
6801F31-4939-00: RNCC: 3 | RNVC: 2

5 Apr 1995

5120-14-345-9757
Socket Head Screw Key

143459757
84B1-5: RNCC: 3 | RNVC: 2
85-688-9505: RNCC: 6 | RNVC: 9

5 Nov 1977

5120-14-529-8523
Combination Box And Open End Box Wrench

145298523
7107-1460-029: RNCC: 3 | RNVC: 2
YM1098A00: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-385-4536
Open End Wrench

143854536
330A93-2040-20: RNCC: 3 | RNVC: 2
330A 93-2040-20: RNCC: 5 | RNVC: 2

26 Jul 1983

5120-14-291-1030
Wrench Kit

142911030
NO PRIMARY REF14-291-1030: RNCC: 3 | RNVC: 2
462-3A: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-407-1493
Open End Wrench

144071493
NO PRIMARY REF14-407-1493: RNCC: 3 | RNVC: 2
0102474: RNCC: 5 | RNVC: 2
44-30X31: RNCC: 5 | RNVC: 2
44.30X31: RNCC: 5 | RNVC: 2
91566660: RNCC: 5 | RNVC: 2

12 Feb 1986

5120-14-462-9179
Mechanical Puller Set

144629179
2152-00: RNCC: 3 | RNVC: 2
89482694: RNCC: 5 | RNVC: 2

5 May 1993

5120-14-485-9488
Electrical Contact Inserter And Remover

144859488
MMG091-02: RNCC: 3 | RNVC: 2

26 Feb 1997

5120-14-256-7590
Open End Wrench

142567590
E74301C19AGU: RNCC: 2 | RNVC: 1
AA7,62NF1-1435: RNCC: 3 | RNVC: 2
530584: RNCC: 5 | RNVC: 2
AA52-1435: RNCC: 5 | RNVC: 2
AA7-62NF1-1435: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-432-8466
Open End Wrench

144328466
NO PRIMARY REF14-432-8466: RNCC: 3 | RNVC: 2
540405: RNCC: 5 | RNVC: 9
540405: RNCC: 5 | RNVC: 9

28 Jun 1989

5120-14-288-3023
Open End Wrench

142883023
VTR250-1119: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-451-3110
Face Spanner Wrench Socket

144513110
MHJ199-21: RNCC: 3 | RNVC: 2
MHJ199-21: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-481-6039
Face Spanner Wrench Socket

144816039
NO PRIMARY REF14-481-6039: RNCC: 3 | RNVC: 2
807652: RNCC: 5 | RNVC: 9

16 May 1996

5120-14-418-5145
Spanner Wrench

144185145
3511 191 46251: RNCC: 3 | RNVC: 2
3511 191 46251: RNCC: 5 | RNVC: 2
3511-191-46251: RNCC: 5 | RNVC: 2

26 Aug 1987

5120-14-385-3428
Out Contro Faux Ron

143853428
6802P34-1003-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-241-1512
Cle A Ergots Specia

142411512
0764-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-336-2209
Outil Reglage Biell

143362209
3160S94-33-000-1: RNCC: 3 | RNVC: 2
85-100-3110: RNCC: 6 | RNVC: 9

24 Jul 1976

5120-14-514-7324
Cross Tip Screwdriver

145147324
ENFD6568-2X100: RNCC: 3 | RNVC: 2

11 Jun 1999

5120-14-361-4902
Bearing And Bushing Inserter

143614902
8810502000: RNCC: 3 | RNVC: 2
85-691-1820: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-270-9359
Flat Tip Screwdriver

142709359
TT-2E40: RNCC: 3 | RNVC: 2
4111-9035: RNCC: 3 | RNVC: 2
AR.2X40: RNCC: 3 | RNVC: 2
91369533: RNCC: 5 | RNVC: 2
AR.2X40: RNCC: 5 | RNVC: 2
0009800: RNCC: 5 | RNVC: 2
3148510098005: RNCC: 5 | RNVC: 2
AR2X40: RNCC: 5 | RNVC: 2
1460 AR 2X40: RNCC: 5 | RNVC: 9
0024-13-984-6170: RNCC: 6 | RNVC: 9

1 Jan 1970

5120-14-448-3880
Spanner Wrench

144483880
NO PRIMARY REF14-448-3880: RNCC: 3 | RNVC: 2
509487: RNCC: 5 | RNVC: 9
509487: RNCC: 5 | RNVC: 9

26 Jun 1991

5120-14-290-3609
Saddler's Sewing Awl

142903609
ALENEC0URBEFER80MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-290-3609: RNCC: 3 | RNVC: 2
ALENEC0URBEFER80MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-474-9851
Spanner Wrench

144749851
807702: RNCC: 3 | RNVC: 2
85-694-4034: RNCC: 6 | RNVC: 9

16 Mar 1995

5120-14-294-0704
Blacksmith's Vise

142940704
NO PRIMARY REF14-294-0704: RNCC: 3 | RNVC: 2
1464: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-213-4684
Levier Avec Vis Et

142134684
S2637: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-573-1103
Ratchet Wrench

145731103
SPP9300160: RNCC: 3 | RNVC: 2

14 Sep 2012

5120-14-563-7692
Hand Terminal Crimping Tool

145637692
985895: RNCC: 3 | RNVC: 2
AA015692: RNCC: 6 | RNVC: 9

12 Mar 2010

5120-14-251-4454
Extracteur Special

142514454
123037-157: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-265-6932
Tige De Serrage

142656932
155520: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-452-5235
Extracteur

144525235
D46415: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-380-3644
Cle De Manoeuvre

143803644
22-265: RNCC: 3 | RNVC: 2
080202062100: RNCC: 5 | RNVC: 9

8 Nov 1982

5120-14-341-8204
Protec Meca Extract

143418204
CH300-1-1: RNCC: 3 | RNVC: 2

14 Apr 1977

5120-14-573-3268
Open End Wrench

145733268
FAQV7 097 12 P 243 020 CLE BLOC: RNCC: 3 | RNVC: 2

4 Oct 2012

5120-14-219-2154
Mordache Speciale P

142192154
PR46327: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-372-2148
Pince A Sertir Stop

143722148
302993: RNCC: 3 | RNVC: 2

1 Sep 1981

5120-14-040-0671
Bearing Staking Installation Tool

140400671
BL43948: RNCC: 3 | RNVC: 2
BL43948: RNCC: 5 | RNVC: 2
BL43948: RNCC: 5 | RNVC: 9
5120AA2012479: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-386-4522

5120-14-313-7968

5120-14-296-9124
Cle Speciale

142969124
000625003P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-380-9212
Butoi Outil Serrage

143809212
2320-06493: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-260-3977
Cle Speciale

142603977
M16-024: RNCC: 3 | RNVC: 2
M16-024: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-357-9963
Detau Cle

143579963
MHC304-43: RNCC: 3 | RNVC: 2
MHC304-43: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-288-6981
Bague De Montage

142886981
D1553-4820: RNCC: 3 | RNVC: 2
D1553-4820: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-357-6142
Montage Securit Cle

143576142
2310-03178: RNCC: 3 | RNVC: 2

27 Jun 1979

5120-14-228-0781
Bloc De Pre-Sertiss

142280781
RPS4F6X1K: RNCC: 3 | RNVC: 2
RPS4F4-6K: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-424-3787
Spanner Wrench

144243787
365A93-3201-01: RNCC: 3 | RNVC: 2

19 May 1988

5120-14-514-0206
Open End Wrench

145140206
ENFD29159-34X35: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-506-9897
Flat Tip Screwdriver

145069897
ENFD5494CA2X12X250C-380: RNCC: 3 | RNVC: 2
F300 0P 000 1251: RNCC: 5 | RNVC: 2

2 Jun 1998

5120-14-374-0893
Etau Support

143740893
UFG314-21: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-229-8591
Socket Wrench Socket

142298591
NO PRIMARY REF14-229-8591: RNCC: 3 | RNVC: 2
144L285: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-406-6529
Filete Jet

144066529
853-200-409-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-329-6352
Spatule Mont Joints

143296352
G1-15-606-1: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-477-1225
Contr Equipee Regle

144771225
10085482: RNCC: 3 | RNVC: 2
21-0986: RNCC: 5 | RNVC: 2

26 Jul 1995

5120-14-281-5898

5120-14-477-4341
Extracteur Cran Suc

144774341
27897: RNCC: 3 | RNVC: 2

30 Aug 1995

5120-14-233-4338

5120-14-281-2977
Cle A Fourche Jambe

142812977
C46921: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-281-2992
Douille A Creneaux

142812992
C46943: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-503-5845
Socket Wrench Socket

145035845
J.19LVSE: RNCC: 3 | RNVC: 2
3148510276014: RNCC: 5 | RNVC: 2
0027601: RNCC: 5 | RNVC: 9

21 Jan 1998

5120-14-462-1706
Dispositif Emmanche

144621706
7-010341-6: RNCC: 3 | RNVC: 2
7-010341-6: RNCC: 5 | RNVC: 9

13 Apr 1993

5120-14-262-4684
Pointe A Crochet

142624684
1196: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-240-5373
Cle A Ergots Specia

142405373
3224100: RNCC: 3 | RNVC: 2
32241: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-232-9946
Matrice De Sertissa

142329946
45239-2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-561-1344
Combination Box And Open End Wrench Set

145611344
3148517949041: RNCC: 3 | RNVC: 2
MODM.440-1: RNCC: 3 | RNVC: 2
794904: RNCC: 5 | RNVC: 2

18 Jun 2009

5120-14-202-6003
Flat Tip Screwdriver

142026003
7886: RNCC: 3 | RNVC: 2
AMG7886-2: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-291-1019
Socket Wrench Socket

142911019
K.28A: RNCC: 3 | RNVC: 2
3148510292656: RNCC: 5 | RNVC: 2
0029265: RNCC: 5 | RNVC: 9
K28: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-267-2114
Screwdriver Bit

142672114
1193-3: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-368-6795
Combination Box And Open End Wrench

143686795
40.27L: RNCC: 3 | RNVC: 2
3148511011485: RNCC: 5 | RNVC: 2
40-27L: RNCC: 5 | RNVC: 2
0101148: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-260-3624
Spanner Wrench

142603624
3160-95-62-004: RNCC: 3 | RNVC: 2
3160S95-62-004: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-386-9748
Appareil Pr Rectifi

143869748
99250901304: RNCC: 3 | RNVC: 2
99-250-90-13-04: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-418-3415
Open End Wrench

144183415
44-11X13CP: RNCC: 3 | RNVC: 2
44-11X13 CP: RNCC: 5 | RNVC: 2

12 Aug 1987

5120-14-455-1495
Cle Pour Ecrou

144551495
16818279: RNCC: 3 | RNVC: 2
16818279: RNCC: 5 | RNVC: 2
85-693-8737: RNCC: 6 | RNVC: 9

1 May 1992

5120-14-578-4728
Mechanical Puller S

145784728
8813420005: RNCC: 3 | RNVC: 2

3 Dec 2013

5120-14-551-6906
Socket Wrench Handle

145516906
M.120A: RNCC: 3 | RNVC: 2
.120A: RNCC: 5 | RNVC: 2
431641: RNCC: 5 | RNVC: 2
M120A: RNCC: 5 | RNVC: 9

16 Oct 2006

5120-14-431-4847
Socket Head Screw Key

144314847
0372-42-10049: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-558-2253
Socket Wrench Screwdriver Attachment

145582253
KT.19A: RNCC: 3 | RNVC: 2
KT.19: RNCC: 5 | RNVC: 9

15 Sep 2008

5120-14-576-6404
Inserter And Remove

145766404
8814106001: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-317-0433
Rodoir De Joint

143170433
RT5178: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-436-0249
Centrage

144360249
RT19357: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-383-9872
Cric Hydrauliq Tete

143839872
LP6: RNCC: 3 | RNVC: 9
535724: RNCC: 5 | RNVC: 2
RASLP6: RNCC: 5 | RNVC: 9

4 May 1983

5120-14-264-7871

5120-14-369-3687

5120-14-216-4186

5120-14-330-2389
Bouchon Extracteur

143302389
MS1195: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-424-6727
Collection Visite

144246727
22937: RNCC: 3 | RNVC: 2
4201 200 000 790: RNCC: 5 | RNVC: 2
F300 0T 000 6998: RNCC: 6 | RNVC: 9

2 Jun 1988

5120-14-373-7830
Rallonge Extracteur

143737830
0068002: RNCC: 3 | RNVC: 2
U.32R1C: RNCC: 5 | RNVC: 2
U32R1C: RNCC: 5 | RNVC: 2

13 Nov 1981

5120-14-300-9627
Positionneur Elemen

143009627
341A93-3225-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-287-5261
Slip Joint Pliers

142875261
176CPY: RNCC: 3 | RNVC: 2
FACOM 176CPY: RNCC: 5 | RNVC: 2
91225979: RNCC: 5 | RNVC: 2
960008-1REP10: RNCC: 5 | RNVC: 2
104-9242: RNCC: 5 | RNVC: 2
FACOM176CPY: RNCC: 5 | RNVC: 9
958 211 001 001: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-228-5172
Open End Wrench

142285172
NO PRIMARY REF14-228-5172: RNCC: 3 | RNVC: 2
200307: RNCC: 5 | RNVC: 9
285-25: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-391-8642
Reglage Gabarit

143918642
MJN448-24: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-258-7770
Wrench Extension Handle

142587770
FH137-916: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-273-7526
Pliers

142737526
E77-002-19: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-405-9749
Spanner Wrench

144059749
0U50335: RNCC: 3 | RNVC: 2
85-692-6977: RNCC: 6 | RNVC: 9

12 Dec 1985

5120-14-477-5039
Socket Wrench Handle

144775039
A.300PA: RNCC: 3 | RNVC: 2
3148510012490: RNCC: 5 | RNVC: 2
1111038R00: RNCC: 5 | RNVC: 2
A.300P: RNCC: 5 | RNVC: 9
0001249: RNCC: 5 | RNVC: 9
0001253: RNCC: 5 | RNVC: 9
AA006668: RNCC: 6 | RNVC: 9

7 Sep 1995

5120-14-241-1641
Poincon Monte Conne

142411641
8459-127: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-265-4741
Open End Wrench

142654741
863-5X5: RNCC: 3 | RNVC: 2
HK1-30: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-278-1140
Electrical Card Extractor

142781140
NO PRIMARY REF14-278-1140: RNCC: 3 | RNVC: 2
20980: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-272-8461
Tournevis

142728461
25-0303: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-259-5368
Cle Carree

142595368
NO PRIMARY REF14-259-5368: RNCC: 3 | RNVC: 2
4212: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-235-6974
Bouterolle Tire Riv

142356974
M0B225-9: RNCC: 3 | RNVC: 2
C0PS02280000: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-559-8982
Mechanical Puller

145598982
U.49PJ2: RNCC: 3 | RNVC: 2
3148516948151: RNCC: 5 | RNVC: 2

3 Mar 2009

5120-14-539-8096
Open End Wrench

145398096
8036191L00: RNCC: 3 | RNVC: 2

11 Feb 2004

5120-14-522-7202
Hand Terminal Crimping Tool

145227202
OUT13626: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-217-2800

5120-14-340-6479
Combination Box And Open End Wrench

143406479
40.1'1/8L: RNCC: 3 | RNVC: 2
3148511012284: RNCC: 5 | RNVC: 2
40-1 1-8: RNCC: 5 | RNVC: 2
0713 303 15: RNCC: 5 | RNVC: 2
40 1 1/8L: RNCC: 5 | RNVC: 2
0101228: RNCC: 5 | RNVC: 9
3059000870: RNCC: 5 | RNVC: 9
85-688-9530: RNCC: 6 | RNVC: 9

14 Feb 1977

5120-14-321-9561
Cle A Panier

143219561
GSM196-010F37: RNCC: 3 | RNVC: 2
GSM196-10F37: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-321-2233
Spanner Wrench

143212233
NO PRIMARY REF14-321-2233: RNCC: 3 | RNVC: 2
0U123022: RNCC: 5 | RNVC: 9
123022: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-430-1065
Sertissag Outillage

144301065
6232-54658: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-484-2342
Reglage Jeu Cales

144842342
MJD600-21: RNCC: 3 | RNVC: 2

31 Oct 1996

5120-14-396-1870
Cle Pour Oculaire

143961870
04420UT09-239-403: RNCC: 3 | RNVC: 2
0442-0UT09-239-403: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-297-6181
Outillage Demontage

142976181
1-1038-02-84: RNCC: 3 | RNVC: 9
1-1038-02-84: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-523-9997
Socket Head Screw Key Set

145239997
89R.JM8: RNCC: 3 | RNVC: 2
3148511268971: RNCC: 5 | RNVC: 2
89R JM8: RNCC: 5 | RNVC: 2

20 Feb 2001

5120-14-232-1463
Mechanical Finger

142321463
54671GRIPT0U: RNCC: 3 | RNVC: 2
54671GRIPT0U: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-250-8170
Body And Fender Spoon

142508170
M0B327: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-532-5104
Open End Wrench

145325104
10627851: RNCC: 3 | RNVC: 2

6 Nov 2002

5120-14-382-5698
Electrical Card Extractor

143825698
16928927: RNCC: 3 | RNVC: 2
16928927: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-360-7702
Montage Bague Appar

143607702
MAS4721: RNCC: 3 | RNVC: 2
M532-01-11000-2A1: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-483-2287
Sertissage Embout

144832287
26-519-03: RNCC: 3 | RNVC: 2
26-519-07: RNCC: 5 | RNVC: 2
26-519-06: RNCC: 5 | RNVC: 2

28 Aug 1996

5120-14-562-3678
Oil Filter Wrench

145623678
D.140: RNCC: 3 | RNVC: 2
19733: RNCC: 5 | RNVC: 2
3148510197333: RNCC: 5 | RNVC: 2

19 Oct 2009

5120-14-280-2420
A Douille Cle

5120-14-273-7080
Marteau A Mai Corps

5120-14-350-8901
Spanner Wrench

143508901
1-4-101040: RNCC: 3 | RNVC: 9

12 Jul 1978

5120-14-244-9000
Open End Wrench

142449000
44-63X67EC: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-519-9304
Spanner Wrench

145199304
TPS2A1006A: RNCC: 3 | RNVC: 2

21 Apr 2000

5120-14-507-6106
Screwdriver Bit

145076106
ENH.305: RNCC: 3 | RNVC: 2
0023886: RNCC: 5 | RNVC: 2

29 Jul 1998

5120-14-334-0129
Screwdriver Bit

143340129
NEC2: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-488-6839
Seal Inserter And Remover

144886839
257078560: RNCC: 3 | RNVC: 2

28 May 1997

5120-14-205-9220
Spanner Wrench

142059220
253-5M362A1: RNCC: 3 | RNVC: 9
RU253-5M362A1: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-262-9679
Open End Wrench

142629679
35-154966: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-406-6189
Joints Emmanche

144066189
853-200-787-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-514-3867
Screwdriver Bit

145143867
ENFD6526AC1-6X8: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-349-8664
Spanner Wrench

143498664
0427-02008: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-446-8354
Socket Wrench Socket

144468354
K.1'LA: RNCC: 3 | RNVC: 2
3148510304458: RNCC: 5 | RNVC: 2
K1LA: RNCC: 5 | RNVC: 2
0030445: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-406-8954
Outil Reglage Rotul

144068954
110-400-00W16H: RNCC: 3 | RNVC: 2
110-400-00W16E: RNCC: 5 | RNVC: 2

14 Jan 1986

5120-14-461-2240
Open End Wrench

144612240
01-069-03-019: RNCC: 3 | RNVC: 2

3 Mar 1993

5120-14-212-2419
Open End Wrench

142122419
15-11X13: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-351-2485
Spanner Wrench

143512485
E926-29: RNCC: 3 | RNVC: 2
689708: RNCC: 5 | RNVC: 9

10 Aug 1978

5120-14-431-7858
Pliers

144317858
0453-6089923: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-490-6909
Caliper

144906909
241 C 00307 000: RNCC: 3 | RNVC: 2
F300 0T 000 1037: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-465-4224
Socket Head Screw Key Blade

144654224
0034075: RNCC: 3 | RNVC: 2
NEX.55: RNCC: 3 | RNVC: 2

29 Sep 1993

5120-14-238-1387
Open End Wrench

142381387
61653AREPA: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-244-6999
Inserted Hammer Face

142446999
EA.60: RNCC: 3 | RNVC: 2
EA60: RNCC: 5 | RNVC: 2
3148510220802: RNCC: 5 | RNVC: 2
0022080: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-431-9066
Detent Handling Tool

144319066
60064: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-490-8735
Cle A P

144908735
4065 030 000 382: RNCC: 3 | RNVC: 2
F300 0T 000 4981: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-301-4117
Open End Wrench

143014117
69-85: RNCC: 3 | RNVC: 2
3272670223882: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-504-3654
Socket Wrench Socket Set

145043654
R.40E: RNCC: 3 | RNVC: 2
0512113: RNCC: 5 | RNVC: 2
3148515121135: RNCC: 5 | RNVC: 2

11 Feb 1998

5120-14-436-0204
Preformed Packing Inserter

144360204
568718: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-558-3676
Combination Box And Open End Wrench

145583676
440.10: RNCC: 3 | RNVC: 2
3148517679733: RNCC: 5 | RNVC: 2
767973: RNCC: 5 | RNVC: 9

25 Sep 2008

5120-14-214-4145

5120-14-488-5518
Flat Tip Screwdriver

144885518
AZF.6,5X100: RNCC: 3 | RNVC: 2
AZF6-5X100: RNCC: 5 | RNVC: 2
1129175F00: RNCC: 5 | RNVC: 2
0013428: RNCC: 5 | RNVC: 2
3148510134284: RNCC: 5 | RNVC: 2
250-5765: RNCC: 5 | RNVC: 2
FACOMAZF.6,5X100: RNCC: 5 | RNVC: 9

21 May 1997

5120-14-231-6184
Spanner Wrench

142316184
NO PRIMARY REF14-231-6184: RNCC: 3 | RNVC: 2
31-46X52: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-421-2556
Hand Screw Jack Extension Stop

144212556
3985: RNCC: 3 | RNVC: 2
85-693-4405: RNCC: 6 | RNVC: 9

12 Jan 1988

5120-14-447-3460
Adjustable Wrench

144473460
113.18: RNCC: 3 | RNVC: 2
113-18: RNCC: 5 | RNVC: 2
3148511326602: RNCC: 5 | RNVC: 2
91718973: RNCC: 5 | RNVC: 2
250-4348: RNCC: 5 | RNVC: 2
FACOM113.18: RNCC: 5 | RNVC: 9
0132660: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-466-4718
Spanner Wrench

144664718
MAT137-0041F3: RNCC: 3 | RNVC: 2
GSM137-027F3: RNCC: 5 | RNVC: 2

10 Nov 1993

5120-14-391-8635
Torque Wrench Adapter

143918635
MHJ159-23: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-325-4759
Matrice Serti Conta

143254759
8459-166: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-362-6835
Plaquette De Mainti

143626835
9970-123-144: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-332-1134
Spanner Wrench

143321134
461-65019-000: RNCC: 3 | RNVC: 2
02-461-10037-000: RNCC: 5 | RNVC: 2
461-65019-000: RNCC: 5 | RNVC: 2
85-694-4581: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-313-0567
Tige Poussoir Extra

143130567
0-702312-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-432-0751
Cle A Creneaux

144320751
0065604: RNCC: 3 | RNVC: 2
T.279: RNCC: 5 | RNVC: 2

22 May 1989

5120-14-428-5284
Reglage Barillet

144285284
MJN3462404: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-225-5366

5120-14-032-3503
Chapeau D'outil

140323503
34913: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-290-6505
Cle Douille Ouverte

142906505
R012: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-363-7097
Fixa Soufflet Bague

143637097
160-888623: RNCC: 3 | RNVC: 2

6 Jul 1980

5120-14-450-6761
Screwdriver Bit

144506761
EBNA.205: RNCC: 3 | RNVC: 2
3148510223155: RNCC: 5 | RNVC: 2
EBNA205: RNCC: 5 | RNVC: 2
1059079A00: RNCC: 5 | RNVC: 2
91711373: RNCC: 5 | RNVC: 2
0022315: RNCC: 5 | RNVC: 9

16 Oct 1991

5120-14-459-0568
Socket Wrench Screwdriver Attachment

144590568
0514450: RNCC: 3 | RNVC: 2
3148515144509: RNCC: 5 | RNVC: 2
RX.20: RNCC: 5 | RNVC: 2
RX20: RNCC: 5 | RNVC: 2

18 Nov 1992

5120-14-248-1082

5120-14-511-0294
Socket Wrench Socket

145110294
JB.7/8: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-237-9398
Valve Spring Lifter

142379398
U.13A: RNCC: 3 | RNVC: 2
3148510660806: RNCC: 5 | RNVC: 2
U13A: RNCC: 5 | RNVC: 2
0066080: RNCC: 5 | RNVC: 9
U13: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-218-1835
Socket Wrench Handle

142181835
17-9-679: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-442-5440
Socket Wrench Socket

144425440
JB.5/8: RNCC: 3 | RNVC: 2
3148510291567: RNCC: 5 | RNVC: 2
JB-5-8: RNCC: 5 | RNVC: 2
042762: RNCC: 5 | RNVC: 2
0029156: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-309-0512
Commande Manuelle

143090512
3511 958 16641: RNCC: 3 | RNVC: 2
3511-958-16641: RNCC: 5 | RNVC: 2
LG81664: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-313-7284
Cone Mise En Forme

143137284
S16-0605-0931: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-334-9613
Socket Wrench Adapter

143349613
HE674-0372: RNCC: 3 | RNVC: 2
9571547: RNCC: 5 | RNVC: 1

2 Jun 1976

5120-14-455-2251
Six Point Tip Screwdriver

144552251
AEX.8X75: RNCC: 3 | RNVC: 2
104-4219: RNCC: 5 | RNVC: 2
0613 463 04: RNCC: 5 | RNVC: 2
3148510049755: RNCC: 5 | RNVC: 2
FACOMAEX.8X75: RNCC: 5 | RNVC: 9
004975: RNCC: 5 | RNVC: 9

13 May 1992

5120-14-246-7872
Blacksmith's Top Swage

142467872
M0B17-25EC: RNCC: 3 | RNVC: 2
3831-25EMMANCHE: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-516-5308
Open End Wrench

145165308
20.11/16: RNCC: 3 | RNVC: 2

29 Sep 1999

5120-14-304-4717
Torque Wrench Adapter

143044717
160-71965-31: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-505-5468
Flat Tip Screwdriver

145055468
ENFD6513-A1X5-5X150X245: RNCC: 3 | RNVC: 2

24 Mar 1998

5120-14-222-6186
Socket Wrench Socket

142226186
S1-2KK: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-393-2076
Cle Chape Pilot Aut

143932076
330A98-7525-01: RNCC: 3 | RNVC: 2
330A-98.7525-01: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-261-2436
Guide Roulement Et

142612436
NO PRIMARY REF14-261-2436: RNCC: 3 | RNVC: 2
BL19925: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-404-4504
Bearing And Bushing Remover

144044504
NO PRIMARY REF14-404-4504: RNCC: 3 | RNVC: 2
96400-78: RNCC: 5 | RNVC: 9

30 Oct 1985

5120-14-385-3486
Bearing And Bushing Inserter

143853486
6808P32-6003-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-276-3244
Screwdriver Bit

142763244
NO PRIMARY REF14-276-3244: RNCC: 3 | RNVC: 2
C0PSAT1875L10: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-530-2871
Mechanical Puller Attachment

145302871
U.23D9: RNCC: 3 | RNVC: 2
3148510668291: RNCC: 5 | RNVC: 2
U23D9: RNCC: 5 | RNVC: 2

28 May 2002

5120-14-461-6881
Socket Head Screw Key

144616881
84.T2,5: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-232-9207
Cle A Ergots Specia

142329207
78510: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-558-7482
Socket Wrench Socket

145587482
K.27HB: RNCC: 3 | RNVC: 2

30 Oct 2008

5120-14-421-6306
Socket Wrench Extension

144216306
210105: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-545-9173
Socket Wrench Screwdriver Attachment

145459173
61369515: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-523-5465
Hydraulic Fitting Crimping Tool Head

145235465
DLT10PSHAS005: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-334-0142
Screwdriver Bit

143340142
NEC3: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-522-2457
Fixed Open End Wrench Set

145222457
44.J1PB: RNCC: 3 | RNVC: 2
PX.44J1: RNCC: 5 | RNVC: 2

11 Oct 2000

5120-14-515-8937
Socket Wrench Socket

145158937
12702005: RNCC: 3 | RNVC: 2

24 Aug 1999

5120-14-505-9248
Flat Tip Screwdriver

145059248
ENFD6514-A1X5-5X150X255: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-312-5309
Verin Depose Volet

143125309
9970-111-092: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-438-5011
Face Spanner Wrench Socket

144385011
37AM023: RNCC: 3 | RNVC: 2
85-694-0448: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-443-9709
Open End Wrench

144439709
GS120-22: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-428-5330
Graissage Montage

144285330
MMG060-46: RNCC: 3 | RNVC: 2
MMG060-46: RNCC: 5 | RNVC: 2

8 Dec 1988

5120-14-201-5196
Blacksmith's Anvil

142015196
1751: RNCC: 3 | RNVC: 2
74721-35: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-247-9661
Cle A Fourche

142479661
RT20925: RNCC: 3 | RNVC: 2
99-710-7666: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-393-7993
Spanner Wrench

143937993
NO PRIMARY REF14-393-7993: RNCC: 3 | RNVC: 2
93291947006-1: RNCC: 5 | RNVC: 2
99871947117: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-381-6206
Combination Box And Open End Wrench

143816206
40.38L: RNCC: 3 | RNVC: 2
50-38: RNCC: 3 | RNVC: 2
40-38: RNCC: 5 | RNVC: 2
40-38L: RNCC: 5 | RNVC: 2
3272670282933: RNCC: 5 | RNVC: 2
CAE00879: RNCC: 5 | RNVC: 2
0101159: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-212-8546
Adjustable Wrench

142128546
E74-324-24-15DEGRES: RNCC: 2 | RNVC: 2

1 Jan 1964

5120-14-391-8023
Socket Wrench Socket

143918023
Y060-003-000A: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-392-7208
Spanner Wrench

143927208
043801-608000: RNCC: 3 | RNVC: 2
0438-01-608000: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-276-3073
Socket Wrench Socket

142763073
M67: RNCC: 3 | RNVC: 2
M-67: RNCC: 3 | RNVC: 2
M67: RNCC: 3 | RNVC: 2
T67: RNCC: 3 | RNVC: 9
3148510318509: RNCC: 5 | RNVC: 2
3272670302983: RNCC: 5 | RNVC: 2
DEMT67: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-489-1681
Socket Head Screw Key

144891681
83H.4: RNCC: 3 | RNVC: 2
3148511240410: RNCC: 5 | RNVC: 2
8034262X00: RNCC: 5 | RNVC: 2
CAE00892: RNCC: 5 | RNVC: 2
0715 31 20: RNCC: 5 | RNVC: 2
0124041: RNCC: 5 | RNVC: 9

1 Jul 1997

5120-14-222-7061
Spanner Wrench

142227061
22378: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-232-9194
Outil Pour Emmanche

142329194
58933: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-538-4163
Solid Center Punch

145384163
NGM0010036882448: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-539-2325
Socket Wrench Screwdriver Attachment

145392325
E113J10: RNCC: 3 | RNVC: 2

15 Dec 2003

5120-14-269-5232
Spanner Wrench

142695232
D1512-2211: RNCC: 3 | RNVC: 2
D1512-2211: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-526-8780
Leveling-Support Jack

145268780
DAVID FL16HT FINIE 360MM EP.38MM: RNCC: 3 | RNVC: 2

12 Sep 2001

5120-14-513-3801
Flat Tip Screwdriver

145133801
AY.4X100VE: RNCC: 3 | RNVC: 2
3148510130477: RNCC: 5 | RNVC: 2
0123980F00: RNCC: 5 | RNVC: 2
0613 180 4: RNCC: 5 | RNVC: 2
SYQ5215: RNCC: 5 | RNVC: 2
AY.4X100VSE: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-388-3585
Spanner Wrench

143883585
0UT98: RNCC: 3 | RNVC: 2

3 Nov 1983

5120-14-398-2832
Outil Mise Repos Em

143982832
29556790: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-284-1921

5120-14-502-9749
Screw Thread Insert Inserter

145029749
8816252000: RNCC: 3 | RNVC: 2

17 Dec 1997

5120-14-567-0984
Ratchet Wrench

145670984
467F.10: RNCC: 3 | RNVC: 2

7 Feb 2011

5120-14-271-0720

5120-14-382-1506

5120-14-401-6927
Assortime Tournevis

144016927
AS14: RNCC: 3 | RNVC: 2
3148515006654: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-444-7606
Cle De Serrage

144447606
0478-200003: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-040-5903
Matrice

140405903
48933: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-464-9490
Face Spanner Wrench Socket

144649490
9970-715-023: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-299-6548
Screw Thread Insert Extractor

142996548
01803000000: RNCC: 3 | RNVC: 2
1721218006: RNCC: 5 | RNVC: 2
1735E02035: RNCC: 5 | RNVC: 2
35070100: RNCC: 5 | RNVC: 2
85-681-3060: RNCC: 6 | RNVC: 9

1 Jan 1973

5120-14-283-9729
Broche Depose Planc

142839729
M24-002: RNCC: 3 | RNVC: 2
M24-002: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-348-9768
Cle Speciale

143489768
PSFE34M28HT3KV14-0UT: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-530-0937
Swivel Knob Jeweler's Screwdriver

145300937
0115352D00: RNCC: 3 | RNVC: 2
310161-250: RNCC: 5 | RNVC: 2

14 May 2002

5120-14-368-0742
Flat Tip Screwdriver

143680742
NO PRIMARY REF14-368-0742: RNCC: 3 | RNVC: 2
AGN5,5X150: RNCC: 5 | RNVC: 2
AGN5-5X150: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-376-2334
Spanner Wrench

143762334
NO PRIMARY REF14-376-2334: RNCC: 3 | RNVC: 2
0U134621: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-490-8661
Porte O

144908661
4051 160 004 156: RNCC: 3 | RNVC: 2
F300 0T 000 4898: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6862
Drill

144906862
240 D 01486 000: RNCC: 3 | RNVC: 2
F300 0T 000 0966: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-521-7018
Handling Tool Arm

145217018
160-88916: RNCC: 3 | RNVC: 2

6 Sep 2000

5120-14-435-5967
Pliers

144355967
8811562000: RNCC: 3 | RNVC: 2

8 Nov 1989

5120-14-273-6013
Spanner Wrench

142736013
50030: RNCC: 3 | RNVC: 2
7M331: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-445-0539
Spanner Wrench

144450539
541315: RNCC: 3 | RNVC: 2

31 Jan 1991

5120-14-413-3128
Screwdriver Bit

144133128
ENS.312: RNCC: 3 | RNVC: 2
3148510239255: RNCC: 5 | RNVC: 2
ENS312: RNCC: 5 | RNVC: 2
0023925: RNCC: 5 | RNVC: 9

26 Nov 1986

5120-14-488-8728
Torque Wrench Adapter

144888728
SDP.27: RNCC: 3 | RNVC: 2
SDP27: RNCC: 5 | RNVC: 2

11 Jun 1997

5120-14-504-7611
Stakeholder Bench Plate

145047611
CKS93: RNCC: 3 | RNVC: 2

3 Mar 1998

5120-14-547-6410
Open End Wrench

145476410
41.65L: RNCC: 3 | RNVC: 2
AA018013: RNCC: 6 | RNVC: 9

20 Oct 2005

5120-14-368-3211
Open End Wrench

143683211
004126050P: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-223-5094

5120-14-310-7604

5120-14-256-1533

5120-14-573-3815
Knife To Paste

145733815
4787 25: RNCC: 3 | RNVC: 2

9 Oct 2012

5120-14-301-5364
Socket Head Screw Key

143015364
84.10: RNCC: 3 | RNVC: 2
67-10: RNCC: 3 | RNVC: 2
3148511249901: RNCC: 5 | RNVC: 2
84-10: RNCC: 5 | RNVC: 2
3272670242500: RNCC: 5 | RNVC: 2
91399379: RNCC: 5 | RNVC: 2
0124990: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-433-7966
Socket Head Screw Key

144337966
Y065-008-000C: RNCC: 3 | RNVC: 2

9 Aug 1989

5120-14-532-3850
Torque Wrench Adapter

145323850
MHA621-25: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-425-0979
Mordache A Ressort

144250979
30213-50: RNCC: 3 | RNVC: 2
30213-50: RNCC: 5 | RNVC: 2
85-693-7381: RNCC: 6 | RNVC: 9

21 Jun 1988

5120-14-387-8764
Sonde 3 Points

143878764
HFA20: RNCC: 3 | RNVC: 9
HF-A20: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-231-8224
Etrier Obturateur F

142318224
9970-111-096: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-446-3134
Lunette

144463134
HTLT406628R0001: RNCC: 3 | RNVC: 2
VTR401-2-1202: RNCC: 5 | RNVC: 2

13 Mar 1991

5120-14-412-7755
Support Sertissage

144127755
NO PRIMARY REF14-412-7755: RNCC: 3 | RNVC: 2
H140AMV204M1: RNCC: 5 | RNVC: 9

5 Nov 1986

5120-14-368-8269
Electrical Card Extractor

143688269
14-00490001: RNCC: 3 | RNVC: 2

10 Mar 1981

5120-14-274-8674
Bague De Cone

142748674
R31674-16-18REP2: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-276-3136
Socket Wrench Socket

142763136
K24: RNCC: 3 | RNVC: 2
C-24: RNCC: 3 | RNVC: 2
C24: RNCC: 3 | RNVC: 2
K24: RNCC: 3 | RNVC: 9
3272670296978: RNCC: 5 | RNVC: 2
DEMK24: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-321-9550
Cle A Panier

143219550
GSM196-010F26: RNCC: 3 | RNVC: 2
GSM196-10F26: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-514-5525
Flat Tip Screwdriver

145145525
ENFD6563-1X5-5X400: RNCC: 3 | RNVC: 2

28 May 1999

5120-14-393-0339
Slip Joint Pliers

143930339
201-25-CP: RNCC: 3 | RNVC: 2
201-25CP: RNCC: 3 | RNVC: 2
3272670268661: RNCC: 5 | RNVC: 2

12 Apr 1984

5120-14-433-4020
Pliers

144334020
0427831L00: RNCC: 3 | RNVC: 2

25 Jul 1989

5120-14-546-0429
Combination Box And Open End Wrench

145460429
40.41LA: RNCC: 3 | RNVC: 2

7 Jun 2005

5120-14-340-6408
Screwdriver And Wrench Assembly

143406408
SS16: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-212-0498
Recoil Mechanism Piston Rod Puller

142120498
30689: RNCC: 3 | RNVC: 9

5 Jul 1980

5120-14-435-8031
Open End Wrench

144358031
20111056: RNCC: 3 | RNVC: 2

22 Nov 1989

5120-14-315-1875
Outil Repose Joint

143151875
0-79439-1-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-449-7232
Spanner Wrench

144497232
9689160286: RNCC: 3 | RNVC: 2
EFEP119: RNCC: 5 | RNVC: 2
KDEP2606: RNCC: 5 | RNVC: 2
89231366: RNCC: 5 | RNVC: 2
91739776: RNCC: 5 | RNVC: 2

4 Sep 1991

5120-14-286-0134
Open End Wrench

142860134
DS1820: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-425-8371
Face Spanner Wrench Socket

144258371
DVE1: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-510-7151
Screwdriver Bit

145107151
EX10: RNCC: 3 | RNVC: 2
EX010: RNCC: 3 | RNVC: 2
3148510257914: RNCC: 5 | RNVC: 2
0025791: RNCC: 5 | RNVC: 9

9 Nov 1998

5120-14-313-7221
Spanner Wrench

143137221
C46910: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-278-5046
Spanner Wrench

142785046
A124192: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-454-6789
Flat Tip Screwdriver

144546789
0009890: RNCC: 3 | RNVC: 2
AR.3X75VS: RNCC: 5 | RNVC: 2
AR3X75VS: RNCC: 5 | RNVC: 2
H24142: RNCC: 5 | RNVC: 2
AR.3X75VS: RNCC: 5 | RNVC: 9

9 Apr 1992

5120-14-571-2257
Crimping Tool Die

145712257
985918: RNCC: 3 | RNVC: 2
FACOM 985918: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-14-483-0693
Flat Tip Screwdriver

144830693
AG.5,5X125: RNCC: 3 | RNVC: 2
3148510057019: RNCC: 5 | RNVC: 2
0005701: RNCC: 5 | RNVC: 9
005701: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-319-4063

5120-14-526-6374
Bearing And Bushing Inserter And Remover

145266374
332A93-3185-00: RNCC: 3 | RNVC: 2

8 Aug 2001

5120-14-222-7372
Open End Wrench

142227372
20S18X19: RNCC: 3 | RNVC: 2
19-18X19: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-219-4108
Broche De Montage

142194108
17-9-33: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-386-1433
Spanner Wrench

143861433
360A93-3215-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-490-6910
Caliper

144906910
241 C 00309 025: RNCC: 3 | RNVC: 2
F300 0T 000 1038: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-344-6058
T Cle Serr Machoire

143446058
2614149: RNCC: 3 | RNVC: 2

9 Sep 1977

5120-14-571-3068
Mechanical Puller Attachment

145713068
U.32T2GA20: RNCC: 3 | RNVC: 2
639058: RNCC: 5 | RNVC: 2
3148516390585: RNCC: 5 | RNVC: 2

13 Mar 2012

5120-14-396-9995
Combination Box And Open End Wrench

143969995
T263A: RNCC: 3 | RNVC: 2
T.263: RNCC: 5 | RNVC: 2
3148510653402: RNCC: 5 | RNVC: 2
T263: RNCC: 5 | RNVC: 2
0000027902: RNCC: 5 | RNVC: 2
FRE279-02: RNCC: 5 | RNVC: 2
0065340: RNCC: 5 | RNVC: 9

27 Nov 1984

5120-14-427-4244
Socket Head Screw Key Set

144274244
89.JL12: RNCC: 3 | RNVC: 2
3148515329708: RNCC: 5 | RNVC: 2
89JL12: RNCC: 5 | RNVC: 2
105-0501: RNCC: 5 | RNVC: 2
FACOM 89JL12: RNCC: 5 | RNVC: 2
0532970: RNCC: 5 | RNVC: 9
FACOM89.JL12: RNCC: 5 | RNVC: 9
89.JL12: RNCC: 5 | RNVC: 9
958 236 000 001: RNCC: 6 | RNVC: 9

19 Oct 1988

5120-14-319-8566
Electrical Contact Inserter

143198566
M81969/14-04: RNCC: 3 | RNVC: 2
M15570-12: RNCC: 3 | RNVC: 2
809859: RNCC: 3 | RNVC: 2
8522-12: RNCC: 5 | RNVC: 2
MS27534-12: RNCC: 5 | RNVC: 2
91464905: RNCC: 5 | RNVC: 2
91566835: RNCC: 5 | RNVC: 2
M81969-14-04: RNCC: 5 | RNVC: 9
00-157-3138: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-561-1774
Socket Wrench

145611774
92A.5,5: RNCC: 3 | RNVC: 2
3148516628565: RNCC: 5 | RNVC: 2
662856: RNCC: 5 | RNVC: 2

23 Jun 2009

5120-14-490-6893
Drill

144906893
240 D 01884 021: RNCC: 3 | RNVC: 2
F300 0T 000 1002: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-565-1351
Socket Wrench Screwdriver Attachment

145651351
55Z-9/64: RNCC: 3 | RNVC: 2
91905967: RNCC: 5 | RNVC: 9

15 Jul 2010

5120-14-552-3923
Handling Tool Arm

145523923
R18638: RNCC: 3 | RNVC: 2
R 18638: RNCC: 5 | RNVC: 2

18 Dec 2006

5120-14-459-3233
Cross Tip Screwdriver

144593233
AP.2X100: RNCC: 3 | RNVC: 2
3148510088419: RNCC: 5 | RNVC: 2
1066804P00: RNCC: 5 | RNVC: 2
91794020: RNCC: 5 | RNVC: 2
18509452-0: RNCC: 5 | RNVC: 2
CAE00895: RNCC: 5 | RNVC: 2
0008841: RNCC: 5 | RNVC: 9

25 Nov 1992

5120-14-477-5554
Socket Wrench Adapter

144775554
K.383: RNCC: 3 | RNVC: 2
3148510312026: RNCC: 5 | RNVC: 2
1111494R00: RNCC: 5 | RNVC: 2
0031202: RNCC: 5 | RNVC: 9

11 Sep 1995

5120-14-488-5570
Socket Wrench Extension

144885570
S.210VSE: RNCC: 3 | RNVC: 2
0057906: RNCC: 5 | RNVC: 2
3148510579061: RNCC: 5 | RNVC: 2
S210VSE: RNCC: 5 | RNVC: 2

21 May 1997

5120-14-214-1848
Obus Male Montage C

142141848
92548: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-345-9137
Cle A Ergots

5120-14-365-4920
Support De Serrage

143654920
8522-53: RNCC: 3 | RNVC: 2

19 Sep 1980

5120-14-369-1873
Positionne Axe Tige

143691873
365A93-4145-20: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-223-2535
Cle De Bloc Verrou

142232535
D1054-5302: RNCC: 3 | RNVC: 2
D1054-5302: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-511-5047
Wrench Kit

145115047
NO PRIMARY REF14-511-5047: RNCC: 3 | RNVC: 2
CLES: RNCC: 5 | RNVC: 9
5895AA9992619: RNCC: 6 | RNVC: 9

16 Dec 1998

5120-14-385-3466
Bearing And Bushing Inserter

143853466
6805P32-5424-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-260-0123
Outil Extracteur

142600123
80900-430: RNCC: 3 | RNVC: 2
79507: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-260-4419

5120-14-316-1619
Outi Montag Regulat

143161619
A128116: RNCC: 3 | RNVC: 2
100225: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-252-1751

5120-14-525-9418
Spanner Wrench

145259418
888-403-900-1: RNCC: 3 | RNVC: 2

20 Jun 2001

5120-14-466-2639
Seal Inserter And Remover

144662639
851-200-040-0: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-406-6266
Face Spanner Wrench Socket

144066266
853-100-149-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-440-0545
Socket Wrench Adapter

144400545
R.373: RNCC: 3 | RNVC: 2
R.373: RNCC: 5 | RNVC: 2
3148510531724: RNCC: 5 | RNVC: 2
R373: RNCC: 5 | RNVC: 2
91741490: RNCC: 5 | RNVC: 2
0053172: RNCC: 5 | RNVC: 9
85-694-3948: RNCC: 6 | RNVC: 9

10 Jul 1990

5120-14-398-1998
Spanner Wrench

143981998
853-201-079-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-263-5942
Tournevis

142635942
NO PRIMARY REF14-263-5942: RNCC: 3 | RNVC: 2
116964: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-571-7986
Socket Wrench Socket

145717986
SH-25: RNCC: 3 | RNVC: 2

10 May 2012

5120-14-442-5694
Socket Wrench Socket

144425694
GS66-13: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-14-265-0880
Spanner Wrench

142650880
330A93-2007-00: RNCC: 3 | RNVC: 2
330A93-2007-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-411-2085
Socket Wrench Socket

144112085
110-420-06W26H: RNCC: 3 | RNVC: 2
110-420-06-W26H: RNCC: 5 | RNVC: 2
85-692-5694: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-420-8202
Open End Wrench

144208202
10A-42: RNCC: 3 | RNVC: 2
10A42: RNCC: 5 | RNVC: 2

16 Dec 1987

5120-14-392-7215
Spanner Wrench

143927215
043801-618000: RNCC: 3 | RNVC: 2
0438-01-618000: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-393-5905
Spanner Wrench

143935905
MB052: RNCC: 3 | RNVC: 2
MB0-52: RNCC: 5 | RNVC: 2

7 Jun 1984

5120-14-289-1434
Open End Wrench

142891434
1-615: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-532-9633
Socket Head Screw Key

145329633
84TZS.8: RNCC: 3 | RNVC: 2
3148511257258: RNCC: 5 | RNVC: 2

14 Jan 2003

5120-14-328-5574
Cale Dappui

143285574
022BM011: RNCC: 3 | RNVC: 2
022BM011: RNCC: 5 | RNVC: 2
53MA300770: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-489-4888
Socket Wrench Socket

144894888
R.13F: RNCC: 3 | RNVC: 2
3148510511160: RNCC: 5 | RNVC: 2
R13F: RNCC: 5 | RNVC: 2
0051116: RNCC: 5 | RNVC: 9
AC85321: RNCC: 5 | RNVC: 9
F300 0T 023 6296: RNCC: 6 | RNVC: 9

23 Jul 1997

5120-14-207-4929
Manchon Pour Montag

142074929
6-000-114: RNCC: 3 | RNVC: 2
8810003081: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-449-9251
Sheet Holder Forceps

144499251
0,75IPU: RNCC: 3 | RNVC: 2

16 Sep 1991

5120-14-292-2067
Socket Wrench Socket

142922067
M.77: RNCC: 3 | RNVC: 2
3148510319209: RNCC: 5 | RNVC: 2
M77: RNCC: 5 | RNVC: 2
0031920: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-239-5202

5120-14-413-8553
Spanner Wrench

144138553
905: RNCC: 3 | RNVC: 2

22 Jan 1987

5120-14-347-0223
Face Spanner Wrench Socket

143470223
D47617: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-270-9246
Face Spanner Wrench Socket

142709246
2333: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-524-4399
Mechanical Puller Attachment

145244399
TC3025P003: RNCC: 3 | RNVC: 2

20 Mar 2001

5120-14-490-9486
Tuyau

144909486
4280 284 000 020: RNCC: 3 | RNVC: 2
F300 0T 000 7230: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-330-3098

5120-14-284-1939

5120-14-576-6116
Mechanical Puller S

145766116
8810382003: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-373-6761
Pompe Blocage Outil

143736761
218298: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-237-9523

5120-14-239-8974

5120-14-273-8178

5120-14-220-5164
Poussoir

142205164
3160-95-65-010: RNCC: 3 | RNVC: 2
3160S95-65-010: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-451-1400
Mandrin

144511400
2-46300: RNCC: 3 | RNVC: 2

31 Oct 1991

5120-14-443-0134
Electrical Contact Remover

144430134
8522-2922: RNCC: 3 | RNVC: 2

7 Nov 1990

5120-14-431-4882
Socket Head Screw Key

144314882
0372-42-10038: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-224-7873
Hand Terminal Crimping Tool

142247873
8400-482A: RNCC: 3 | RNVC: 2
5M.8938.220.42: RNCC: 5 | RNVC: 2
8400-482A: RNCC: 5 | RNVC: 2
8400-482: RNCC: 5 | RNVC: 2
8400-482: RNCC: 5 | RNVC: 2
5M8938-220-42: RNCC: 5 | RNVC: 2
603-014: RNCC: 5 | RNVC: 2
91357208: RNCC: 5 | RNVC: 2
8400-482: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-289-8503
Outil Demonte Clip

142898503
0104-076-000: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-522-7481
Poussoir De Siege

145227481
MAT171-0435F11: RNCC: 3 | RNVC: 2

20 Nov 2000

5120-14-303-7601
Extracteur Relais

143037601
BR360-29: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-485-9487
Electrical Contact Inserter And Remover

144859487
MMG091-01: RNCC: 3 | RNVC: 2

26 Feb 1997

5120-14-347-2794
Screw Thread Insert Inserter

143472794
950-0353: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-446-8343
Hand Blind Riveter

144468343
NO PRIMARY REF14-446-8343: RNCC: 3 | RNVC: 2
0176880: RNCC: 5 | RNVC: 2
463: RNCC: 5 | RNVC: 2

17 Apr 1991

5120-14-420-7216
Support Double

144207216
6224-58356: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-376-2280
Mechanical Puller Attachment

143762280
NO PRIMARY REF14-376-2280: RNCC: 3 | RNVC: 2
0U131708: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-204-9266
Adjustable Wrench

142049266
E74-321-200: RNCC: 2 | RNVC: 2
6000-20: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-216-4123
Rallonge Speciale

142164123
MS254-009: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-385-3335
Bearing And Bushing Inserter

143853335
365A93-3112-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-378-3900
Electrical Contact Inserter And Remover

143783900
001100 232 00: RNCC: 3 | RNVC: 2
001100-232-00: RNCC: 5 | RNVC: 2
91526085: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-245-8338
Cle Ecrou De Glace

142458338
PA355-143A1P7: RNCC: 3 | RNVC: 9
PA355-143A1P7: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-433-1363
Socket Wrench Socket

144331363
K.24LA: RNCC: 3 | RNVC: 2
3148510301259: RNCC: 5 | RNVC: 2
91627162: RNCC: 5 | RNVC: 2
0030125: RNCC: 5 | RNVC: 9

11 Jul 1989

5120-14-234-3353

5120-14-262-8244

5120-14-253-5835

5120-14-443-8453
Hole Sheet Metal Holder

144438453
50020510: RNCC: 3 | RNVC: 2
85-694-4314: RNCC: 6 | RNVC: 9

10 Dec 1990

5120-14-459-2264
Emmanchement Outil

144592264
MMG047-68: RNCC: 3 | RNVC: 2
MMG047-68: RNCC: 5 | RNVC: 2

19 Nov 1992

5120-14-371-4271
Pince De Serrage

143714271
6254-57072: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-468-7897
Socket Head Screw Key

144687897
66P30: RNCC: 3 | RNVC: 2
66-P30: RNCC: 3 | RNVC: 2
3272670270800: RNCC: 5 | RNVC: 2

22 Mar 1994

5120-14-371-4260
Spanner Wrench

143714260
6254-57031: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-342-5287
Spanner Wrench

143425287
C1-46858: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-273-7718
Flat Tip Screwdriver

142737718
121-9: RNCC: 3 | RNVC: 2
SYB0306: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-526-1563
Detent Handling Tool

145261563
132226: RNCC: 3 | RNVC: 2

4 Jul 2001

5120-14-232-3057

5120-14-433-1395
Bearing And Bushing Inserter And Remover

144331395
45152156: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-575-0021
Flat Tip And Cross Tip Screwdriver Set

145750021
AN.J12R1PB: RNCC: 3 | RNVC: 2

6 Mar 2013

5120-14-204-9449

5120-14-322-2367

5120-14-333-3672
Spanner Wrench

143333672
10353U33857: RNCC: 3 | RNVC: 2
10353U33857: RNCC: 3 | RNVC: 2
PR46643: RNCC: 5 | RNVC: 2
85-688-3220: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-343-9772
Retaining Ring Pliers

143439772
0DS20640: RNCC: 3 | RNVC: 2
85-689-4377: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-402-3315
Bearing And Bushing Inserter

144023315
365A93-3142-00: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-545-5040
Open End Wrench

145455040
DR-16200-32: RNCC: 3 | RNVC: 2

15 Apr 2005

5120-14-466-7444
Socket Head Screw Key

144667444
3511 193 12011: RNCC: 3 | RNVC: 2
3511-193-12011: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-514-8399
Cross Tip Screwdriver

145148399
ENFD6569-2X40: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-322-5764
Open End Wrench

143225764
0M408-02: RNCC: 3 | RNVC: 2
85-694-8118: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-286-3668
Tubing Pinch-Off Tool

142863668
81-05-01: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-362-1736
Coupelle Dappui

143621736
C1-46752: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-278-7829
Pliers

142787829
3148511433201: RNCC: 3 | RNVC: 2
91463579: RNCC: 5 | RNVC: 2
101829: RNCC: 5 | RNVC: 2
188-20CPY: RNCC: 5 | RNVC: 2
91634523: RNCC: 5 | RNVC: 2
FACOM 188-20CPY: RNCC: 5 | RNVC: 2
958 213 000 001: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-391-5742
Open End Wrench

143915742
OU137736: RNCC: 3 | RNVC: 2
OU137736: RNCC: 5 | RNVC: 9
85-694-3950: RNCC: 6 | RNVC: 9

21 Mar 1984

5120-14-443-6323
Outillag Bloquage

144436323
NO PRIMARY REF14-443-6323: RNCC: 3 | RNVC: 2
OU134224: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-435-8106
Jeu De Jets

144358106
330A98-7532-00: RNCC: 3 | RNVC: 2

22 Nov 1989

5120-14-432-7773
Embout Pompe Tube

144327773
NO PRIMARY REF14-432-7773: RNCC: 3 | RNVC: 2
13687580E: RNCC: 5 | RNVC: 9

26 Jun 1989

5120-14-455-7187
Spanner Wrench

144557187
8814164002: RNCC: 3 | RNVC: 2
85-694-8542: RNCC: 6 | RNVC: 9

11 Jun 1992

5120-14-434-8086
Socket Head Screw Key

144348086
1909-19-01: RNCC: 3 | RNVC: 9

4 Oct 1989

5120-14-289-4429

5120-14-352-9013
Jeu Cles Special

143529013
26-178: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-212-1520
Outil Montage Pion

142121520
549559: RNCC: 3 | RNVC: 2
85-691-2080: RNCC: 6 | RNVC: 9

5 Jul 1980

5120-14-280-8812
Cle Reglage Pendule

142808812
PA356-2M232P14: RNCC: 3 | RNVC: 2
PA356-2M232P14: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-225-3192
Pince Jonc De Capot

142253192
9970-111-013: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-260-2937
Poignee Pour Fraise

142602937
S16-0122-1000: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-235-5955
Spanner Wrench

142355955
2G104033REP4-5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-208-0968
Open End Wrench

142080968
NO PRIMARY REF14-208-0968: RNCC: 3 | RNVC: 2
08090S24: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-405-0876
Bride Serrage Rapid

144050876
BS-1S: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-461-3680
Outil Appui Pr Mont

144613680
1X56-137-277: RNCC: 3 | RNVC: 2

9 Mar 1993

5120-14-391-7054
Sertissag Outillage

143917054
MMG052-13: RNCC: 3 | RNVC: 2
MMG052-13: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-264-9574
Spanner Wrench

142649574
0286-78: RNCC: 3 | RNVC: 2
RA286: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-299-8317
Socket Wrench Socket

142998317
K33: RNCC: 3 | RNVC: 2
M4ZS460D8168: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-430-3482
Comparateur Support

144303482
RT17827: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-291-7994
Entrainement Toc

142917994
02640012700: RNCC: 3 | RNVC: 2
026400127: RNCC: 5 | RNVC: 2
412725: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-458-6797
Roue Immobilisateur

144586797
574085: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-447-0865
Spanner Wrench

144470865
403099: RNCC: 3 | RNVC: 2
403099: RNCC: 5 | RNVC: 9

30 Apr 1991

5120-14-491-0153
Cle

144910153
4602 007 200 120: RNCC: 3 | RNVC: 2
F300 0T 001 0940: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-478-3314
Screwdriver Bit

144783314
EH.108: RNCC: 3 | RNVC: 2
3148510233796: RNCC: 5 | RNVC: 2
0151912K00: RNCC: 5 | RNVC: 2
0023379: RNCC: 5 | RNVC: 9

25 Oct 1995

5120-14-513-1453
Socket Wrench Socket

145131453
0427652A00: RNCC: 3 | RNVC: 2

5 Mar 1999

5120-14-319-6873
Bloca Palie Support

143196873
G1-15-038: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-485-8846
Cle

144858846
K7746-D43746: RNCC: 3 | RNVC: 2
D43746: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-343-6371
Torquage Ecrou Cle

143436371
330A93-2032-00: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-255-9681
Cambreur Fente

142559681
NO PRIMARY REF14-255-9681: RNCC: 3 | RNVC: 2
1307-7: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-456-7138
Devrillage Pince

144567138
853-930-146-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-368-6797
Combination Box And Open End Wrench

143686797
40.29L: RNCC: 3 | RNVC: 2
3148511011508: RNCC: 5 | RNVC: 2
40-29L: RNCC: 5 | RNVC: 2
0101150: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-437-1707
Socket Head Screw Key

144371707
31405245: RNCC: 3 | RNVC: 9
85-694-1341: RNCC: 6 | RNVC: 9

17 Jan 1990

5120-14-305-9349
Cle Speciale

143059349
VTR400-1111WE: RNCC: 3 | RNVC: 2
HTLT406755P0001: RNCC: 3 | RNVC: 2
VTR400-1111: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-437-2490
Screwdriver Bit Holder

144372490
0857072B00: RNCC: 3 | RNVC: 2
85-694-2640: RNCC: 6 | RNVC: 9

24 Jan 1990

5120-14-377-2795
Ensemble Extracteur

143772795
TMY20-32-312: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-525-1662
Socket Wrench Screwdriver Attachment

145251662
RHC.4: RNCC: 3 | RNVC: 2
3148510504711: RNCC: 5 | RNVC: 2

23 May 2001

5120-14-562-1747
Socket Wrench

145621747
43-53-80-1: RNCC: 3 | RNVC: 2

6 Oct 2009

5120-14-253-3690
Etrier Pour Arbre P

142533690
410238M: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-385-6944
Six Pans Embout

143856944
2-34716: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-533-1280
Socket Wrench Socket

145331280
OCE 83.30 I: RNCC: 3 | RNVC: 2
83.30 I: RNCC: 5 | RNVC: 2

23 Jan 2003

5120-14-360-7928
Screwdriver Bit

143607928
0001100: RNCC: 3 | RNVC: 2
A.202EM: RNCC: 5 | RNVC: 2
A202EM: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-400-0655
Filtre A Huile Cle

144000655
8-1403Z: RNCC: 3 | RNVC: 2
131187: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-285-6282

5120-14-490-9608
Cle

144909608
4380 892 382 004: RNCC: 3 | RNVC: 2
F300 0T 000 7679: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-478-5834
Montage Cone

144785834
100-493: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-478-5916
Montage Socle

144785916
0S22625: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-288-6491

5120-14-430-2639
Spanner Wrench

144302639
905478-2AREP13: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-370-6293
Outillage De Tracag

143706293
4101E11-1200-02: RNCC: 3 | RNVC: 2
4101330A11-1200-02: RNCC: 5 | RNVC: 2
4101-330-11-1200-02: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-428-7072
Socket Head Screw Key

144287072
60.620: RNCC: 3 | RNVC: 2
0125650: RNCC: 5 | RNVC: 2
3272670234840: RNCC: 5 | RNVC: 2
60-620: RNCC: 5 | RNVC: 2
84T.6: RNCC: 5 | RNVC: 2
84T6: RNCC: 5 | RNVC: 2

13 Dec 1988

5120-14-389-3544
Montage Gabarit

143893544
MGK122-05: RNCC: 3 | RNVC: 2
MGK122-05: RNCC: 5 | RNVC: 2

19 Dec 1983

5120-14-466-5928
Bearing And Bushing Remover

144665928
851-500-020-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-528-4659
Drift

145284659
888-406-700-1: RNCC: 3 | RNVC: 2
888-406-700-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-271-6994
Pince A Deballer

142716994
4611-40: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-272-8637
Communications Equipment Spring Adjuster

142728637
S1103: RNCC: 3 | RNVC: 2
LMELSH255: RNCC: 5 | RNVC: 2
LMELSH255: RNCC: 5 | RNVC: 9
S1103: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-539-2651
Socket Wrench Adapter-Extension

145392651
T632G3017221: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-280-4165
Cle Speciale

142804165
A122492: RNCC: 3 | RNVC: 2
100082: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-417-1297
Socket Wrench Spanner Attachment

144171297
548919: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-436-0226
Preformed Packing Inserter

144360226
807628: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-376-5599
Screw Thread Insert Inserter

143765599
01500125000: RNCC: 3 | RNVC: 2

28 Apr 1982

5120-14-278-4716
Cle De Simbleautage

142784716
M208-25036: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-539-2679
Electronic Component Inserter And Remover

145392679
275751658-00: RNCC: 3 | RNVC: 2
27575165-8: RNCC: 5 | RNVC: 2

17 Dec 2003

Load More Results