What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 88 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 88 of 110

5120-14-212-8523
Open End Wrench

142128523
15-32X36: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-552-7431
Cross Tip Screwdriver

145527431
AD.0X75AVSE: RNCC: 3 | RNVC: 2
AD.0X75AVSE: RNCC: 5 | RNVC: 2
3148510042985: RNCC: 5 | RNVC: 2

29 Jan 2007

5120-14-488-3138
Socket Head Screw Key Set

144883138
88.JL6: RNCC: 3 | RNVC: 2
3148515329401: RNCC: 5 | RNVC: 2
88JL6: RNCC: 5 | RNVC: 2
0532940: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-500-9573
Mattock

145009573
E69402700000: RNCC: 3 | RNVC: 2
F300 0T 024 9785: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-575-6251
Mechanical Puller

145756251
TM2193G001: RNCC: 3 | RNVC: 2

18 Apr 2013

5120-14-468-8452
Socket Wrench Screwdriver Attachment

144688452
0519136: RNCC: 3 | RNVC: 2
3148515191367: RNCC: 5 | RNVC: 2
SX50: RNCC: 5 | RNVC: 2
0715 133 50: RNCC: 5 | RNVC: 2
SX.50: RNCC: 5 | RNVC: 2

23 Mar 1994

5120-14-243-1566

5120-14-234-3527

5120-14-273-8176

5120-14-493-7564
Tournevis

144937564
F300 0T 005 8532: RNCC: 3 | RNVC: 2
46865: RNCC: 5 | RNVC: 2

15 Oct 1997

5120-14-204-2990

5120-14-217-2698

5120-14-274-1919
Pince A Cintrer A L

142741919
364FH3-8: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-515-8500
Spanner Wrench

145158500
5000260945: RNCC: 3 | RNVC: 2

17 Aug 1999

5120-14-502-3595
Socket Wrench Socket

145023595
NG.46: RNCC: 3 | RNVC: 2
3148510345604: RNCC: 5 | RNVC: 2
NG 46: RNCC: 5 | RNVC: 2
0034560: RNCC: 5 | RNVC: 9

9 Dec 1997

5120-14-521-6351
Torque Wrench Adapter

145216351
SP3109: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-542-7686
Shock Type Wheel Stud Nut Wrench

145427686
5000607744: RNCC: 3 | RNVC: 2

13 Aug 2004

5120-14-382-1604
Socket Head Screw Key

143821604
990302: RNCC: 3 | RNVC: 2
990302: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-539-2583
Mechanical Puller Body

145392583
T623G3004121: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-348-9985
Outillage Demmanche

143489985
3160S95-65-051: RNCC: 3 | RNVC: 2
85-689-1029: RNCC: 6 | RNVC: 9

19 Apr 1978

5120-14-417-3057
Quick Adjusting Screw Clamp

144173057
S0E03-250: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-311-4534
Open End Wrench

143114534
3160S95-12-485: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-436-4492
Torque Wrench Adapter

144364492
8810600113: RNCC: 3 | RNVC: 2
85-694-2186: RNCC: 6 | RNVC: 9

3 Jan 1990

5120-14-381-9164
Spanner Wrench

143819164
R085-001Y000A: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-343-1839
Entraineur Rupteur

143431839
01585100000: RNCC: 3 | RNVC: 2
01585100000: RNCC: 5 | RNVC: 2
85-689-4833: RNCC: 6 | RNVC: 9

16 Jun 1977

5120-14-488-5519
Flat Tip Screwdriver

144885519
AZF.8X150: RNCC: 3 | RNVC: 2
250-5787: RNCC: 5 | RNVC: 2
0013430: RNCC: 5 | RNVC: 2
3148510134307: RNCC: 5 | RNVC: 2
AZF8X150: RNCC: 5 | RNVC: 2
FACOMAZF.8X150: RNCC: 5 | RNVC: 9

21 May 1997

5120-14-275-8589
Cle Verrouillage Po

142758589
6800-2138: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-427-7617
Spanner Wrench

144277617
NO PRIMARY REF14-427-7617: RNCC: 3 | RNVC: 2
E0949637: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-343-9771
Cross Tip Screwdriver

143439771
TDA5: RNCC: 3 | RNVC: 2
85-100-7168: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-373-0246
Mechanical Finger

143730246
7223: RNCC: 3 | RNVC: 2
85-691-8301: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-391-0285
Torque Wrench Adapter

143910285
1402-121E20-200-00-0: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-414-9541
Cle A Ergots Ergots

144149541
116-100E1: RNCC: 3 | RNVC: 2
116.100E1: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-251-3966
Douille A Ergots

142513966
9970-115-335: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-316-6652
Wrench Extension Handle

143166652
TL3617: RNCC: 3 | RNVC: 2
TL3617: RNCC: 5 | RNVC: 1
4X551: RNCC: 5 | RNVC: 2
85-101-3041: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-517-9972
Six Point Tip Screwdriver

145179972
ENFD6576-8X60: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-356-5961
Spanner Wrench

143565961
TF10A32422: RNCC: 3 | RNVC: 2
85-688-6564: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-210-9852
Socket Wrench Socket

142109852
J.14H: RNCC: 3 | RNVC: 2
0713 121 114: RNCC: 5 | RNVC: 2
3148510274607: RNCC: 5 | RNVC: 2
J14H: RNCC: 5 | RNVC: 2
0027460: RNCC: 5 | RNVC: 9
85-600-8841: RNCC: 6 | RNVC: 9

1 Jan 1964

5120-14-392-0851
Torque Wrench Adapter

143920851
853-100-109-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-491-0218
Manchon

144910218
4602 011 300 003: RNCC: 3 | RNVC: 2
F300 0T 001 1013: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-417-5782
Outil D'installatio

144175782
465644-1: RNCC: 3 | RNVC: 2

15 Jul 1987

5120-14-484-6531
Socket Head Screw Key

144846531
83SH.7: RNCC: 3 | RNVC: 2
83SH.7: RNCC: 5 | RNVC: 2
3148511238257: RNCC: 5 | RNVC: 2
235-2791: RNCC: 5 | RNVC: 2
0123825: RNCC: 5 | RNVC: 9
FACOM83SH.7: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-461-0118
Torque Wrench Adapter Set

144610118
J.300-2: RNCC: 3 | RNVC: 2
J300-2: RNCC: 3 | RNVC: 2
3148515037559: RNCC: 5 | RNVC: 2
91629984: RNCC: 5 | RNVC: 2
0503755: RNCC: 5 | RNVC: 9

17 Feb 1993

5120-14-445-7060
Torque Wrench Adapter

144457060
10.3/8: RNCC: 3 | RNVC: 2
3148510926001: RNCC: 5 | RNVC: 2
0092600: RNCC: 5 | RNVC: 9

22 Feb 1991

5120-14-272-8638

5120-14-208-0984

5120-14-414-8340
Outillage

144148340
035-42965-0: RNCC: 3 | RNVC: 9

12 Mar 1987

5120-14-485-3256
Socket Head Screw Key

144853256
82H.14: RNCC: 3 | RNVC: 2
0123141: RNCC: 5 | RNVC: 2
3148511231418: RNCC: 5 | RNVC: 2
82H14: RNCC: 5 | RNVC: 2
0110691W00: RNCC: 5 | RNVC: 2
190200: RNCC: 5 | RNVC: 2
RAR1945: RNCC: 5 | RNVC: 2
91777991: RNCC: 5 | RNVC: 2
0715 31 48: RNCC: 5 | RNVC: 2

15 Jan 1997

5120-14-503-5957
Socket Head Screw Key

145035957
83H.10: RNCC: 3 | RNVC: 2
0124101: RNCC: 5 | RNVC: 2
3148511241011: RNCC: 5 | RNVC: 2
0715 31 26: RNCC: 5 | RNVC: 2

21 Jan 1998

5120-14-368-6866
Spanner Wrench

143686866
300A96406: RNCC: 3 | RNVC: 2
300A96406: RNCC: 3 | RNVC: 2
91373864: RNCC: 5 | RNVC: 2
300A96406: RNCC: 5 | RNVC: 2
300A96406: RNCC: 5 | RNVC: 9
300A96406: RNCC: 5 | RNVC: 9

10 Mar 1981

5120-14-241-1475
Cle A Ergots Specia

142411475
0668-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-483-0714
Open End Wrench

144830714
18.5/8: RNCC: 3 | RNVC: 2
3148510933931: RNCC: 5 | RNVC: 2
093393: RNCC: 5 | RNVC: 9
0093393: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-519-4349
Socket Head Screw Key

145194349
67-6: RNCC: 3 | RNVC: 2
3272670230231: RNCC: 5 | RNVC: 2

17 Mar 2000

5120-14-233-6089

5120-14-238-6659

5120-14-392-0529
Spanner Wrench

143920529
MHJ450-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-249-8321
Blacksmith's Flatter

142498321
M0B13-75EC: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-574-4392
Mechanical Puller

145744392
8816449001: RNCC: 3 | RNVC: 2

21 Jan 2013

5120-14-493-3450
Cle

144933450
0411-60225: RNCC: 3 | RNVC: 2
F300 0T 012 4876: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-237-6852

5120-14-241-1482
Cle A Ergots Specia

142411482
0682-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-341-5742
Cle A Ergots

5120-14-204-0614
Cle Tubulaire A Tet

142040614
E4450: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-397-7617
Cle A Ergots

5120-14-332-0449
Jeu Machoires

143320449
9070-113: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-319-9827
Spanner Wrench

143199827
3CGF74G: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-473-8054
Shock Type Wheel Stud Nut Wrench

144738054
1458-87515333: RNCC: 3 | RNVC: 2

11 Jan 1995

5120-14-545-7633
Injector Spring Compressor

145457633
1670016: RNCC: 3 | RNVC: 2
1670016: RNCC: 5 | RNVC: 2

11 May 2005

5120-14-432-8863
Socket Head Screw Crowfoot Wrench Attachment

144328863
M4Z7101943821: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-300-2722
Screw Thread Insert Inserter

143002722
01590103001: RNCC: 3 | RNVC: 2
32240260: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-287-4817
Socket Head Screw Key

142874817
12509979: RNCC: 3 | RNVC: 2
12509979: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-468-9852
Bearing And Bushing Inserter And Remover

144689852
40N1293027: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-040-4527
Open End Wrench

140404527
AACBR1050951630: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-344-3400
Spanner Wrench

143443400
D47693: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-423-2314
Tube Cle Dyn

144232314
0747178: RNCC: 3 | RNVC: 2
SP1735D-8: RNCC: 5 | RNVC: 2
SP.1735 D-8: RNCC: 5 | RNVC: 2

14 Apr 1988

5120-14-370-0362
Cuvette De Reglage

143700362
F117ACM0032: RNCC: 3 | RNVC: 2
F117220: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-493-0038
Cle

144930038
4065 030 000 279: RNCC: 3 | RNVC: 2
F300 0T 009 4372: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-200-7563
Levier De Demontage

142007563
21190: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-478-5833
Montage Cone

144785833
100-400-4: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-280-8642

5120-14-386-6809
Socket Wrench Socket

143866809
853-100-084-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-253-8108
Rallonge De Cle

142538108
MAT196-0066F18: RNCC: 3 | RNVC: 2
MAT196-1234F14: RNCC: 3 | RNVC: 2
GSM196-011F21: RNCC: 5 | RNVC: 2
GSM196-11F21: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-461-3678
Outil De Montage Pr

144613678
1X56-137-260: RNCC: 3 | RNVC: 2

9 Mar 1993

5120-14-379-2210
Guide Tournevis

143792210
70663303: RNCC: 3 | RNVC: 2
70663303: RNCC: 5 | RNVC: 9
M868186: RNCC: 5 | RNVC: 9
85-691-7061: RNCC: 6 | RNVC: 9

6 Sep 1982

5120-14-294-0761
Blacksmith's Anvil

142940761
3824-100K: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-438-5054
Mise En Place Outil

144385054
J47945: RNCC: 3 | RNVC: 2
85-694-0771: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-346-0556
Terminal Crimping Tool Contact Positioner

143460556
8201-534: RNCC: 3 | RNVC: 2

5 Nov 1977

5120-14-376-2288
Positionneur Segmen

143762288
NO PRIMARY REF14-376-2288: RNCC: 3 | RNVC: 2
0U133374: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-214-4141

5120-14-564-7389
Hand Hydraulic Jack

145647389
OP53: RNCC: 3 | RNVC: 2

1 Jun 2010

5120-14-307-1747

5120-14-219-2212

5120-14-239-7559

5120-14-407-3298
Joints Emmanche

144073298
853-201-375-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-436-4715
Spanner Wrench

144364715
853-203-043-0: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-276-3181
Socket Wrench Socket

142763181
S13-16L: RNCC: 3 | RNVC: 2
SL13-16: RNCC: 3 | RNVC: 2
65LT13-16: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-468-7910
Socket Head Screw Key

144687910
60-315: RNCC: 3 | RNVC: 2
60.315: RNCC: 3 | RNVC: 2
3272670246409: RNCC: 5 | RNVC: 2

22 Mar 1994

5120-14-431-4825
Socket Head Screw Key

144314825
0372-42-10163: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-440-5439
Cle

144405439
30652: RNCC: 3 | RNVC: 2
85-694-1903: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-536-4302
Slugging Type Box Wrench Socket

145364302
W008140078: RNCC: 3 | RNVC: 2

5 Aug 2003

5120-14-349-1042
Screw Thread Insert Inserter

143491042
01500112900: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-040-7361
Combination Box And Open End Wrench Set

140407361
000149003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-552-7657
Screwdriver Bit

145527657
AMZ.D2-3: RNCC: 3 | RNVC: 2
AMZ.D2-3: RNCC: 5 | RNVC: 2
3148510087283: RNCC: 5 | RNVC: 2

30 Jan 2007

5120-14-560-4508
Socket Wrench Adapter

145604508
214147-0: RNCC: 3 | RNVC: 2

21 Apr 2009

5120-14-200-9333
Socket Wrench Socket

142009333
S.1': RNCC: 3 | RNVC: 2
S1: RNCC: 5 | RNVC: 2
3148510545806: RNCC: 5 | RNVC: 2
S.1: RNCC: 5 | RNVC: 2
0054580: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-427-8345
Six Point Tip Screwdriver Set

144278345
0500640: RNCC: 3 | RNVC: 2
AS.9: RNCC: 5 | RNVC: 2

16 Nov 1988

5120-14-547-0344
Face Spanner Wrench Socket

145470344
901134: RNCC: 3 | RNVC: 2
91831062: RNCC: 5 | RNVC: 2

16 Sep 2005

5120-14-437-4325
Bearing And Bushing Inserter And Remover

144374325
16849780: RNCC: 3 | RNVC: 2
16849780: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-395-7157

5120-14-554-8216
Hand Roller

145548216
DL 1070: RNCC: 3 | RNVC: 2
189739000: RNCC: 5 | RNVC: 2

29 Aug 2007

5120-14-541-8121
Mechanical Puller Body

145418121
T947G3102222: RNCC: 3 | RNVC: 2

26 Jun 2004

5120-14-490-8655
Porte O

144908655
4051 160 004 150: RNCC: 3 | RNVC: 2
F300 0T 000 4892: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-440-3035
Mattock-Pick Handle

144403035
159310-6: RNCC: 3 | RNVC: 9
89410713: RNCC: 5 | RNVC: 2
159310-6: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-400-0657
Pliers

144000657
8-1512: RNCC: 3 | RNVC: 2
131190: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-470-3502
Cross Tip Screwdriver

144703502
180/4: RNCC: 3 | RNVC: 2
91602990: RNCC: 5 | RNVC: 2

15 Jun 1994

5120-14-469-8608
Socket Head Screw Key

144698608
0123806: RNCC: 3 | RNVC: 2
83.S2,5: RNCC: 3 | RNVC: 2

16 May 1994

5120-14-552-5556
Socket Wrench Socket

145525556
R.10AVSE: RNCC: 3 | RNVC: 2
R.10AVSE: RNCC: 5 | RNVC: 2
3148510517339: RNCC: 5 | RNVC: 2

16 Jan 2007

5120-14-240-5372
Cle A Ergots Specia

142405372
3221600: RNCC: 3 | RNVC: 2
32216: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-232-9938
Matrice De Sertissa

142329938
48931: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-429-1571
Outillage Mandrin

144291571
547659: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-387-9804

5120-14-564-5714
Drill Guide

145645714
217101: RNCC: 3 | RNVC: 2

7 May 2010

5120-14-220-8395
Socket Wrench Crowfoot Attachment

142208395
17-9-425: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-490-6996
Wrench

144906996
241 W 03059 040: RNCC: 3 | RNVC: 2
F300 0T 000 1184: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-241-1515
Cle A Ergots Specia

142411515
0769-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-234-3360
Cle A Oeil

142343360
NO PRIMARY REF14-234-3360: RNCC: 3 | RNVC: 2
0A88A: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-315-7944

5120-14-283-8111

5120-14-371-4133
Spanner Wrench

143714133
6254-57041: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-281-7312
Cle Boite A Lumiere

142817312
NO PRIMARY REF14-281-7312: RNCC: 3 | RNVC: 2
234-13BT38F0UGA: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-201-3111
Flat Tip Screwdriver

142013111
0056111102: RNCC: 3 | RNVC: 2
278-125X8: RNCC: 3 | RNVC: 9
A117020: RNCC: 5 | RNVC: 2
82599808: RNCC: 5 | RNVC: 9
82599808: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-368-2787
Flat Tip Screwdriver

143682787
4822-303: RNCC: 3 | RNVC: 2
545-20: RNCC: 5 | RNVC: 2

20 Feb 1981

5120-14-271-8356
Spanner Wrench

142718356
PA166-1M933-1P24: RNCC: 3 | RNVC: 9
E74323A45BEW: RNCC: 4 | RNVC: 1

1 Jan 1970

5120-14-300-9630
Socket Wrench Socket

143009630
341A93-3304-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-371-7723
Open End Wrench

143717723
7185P3-16X9-32: RNCC: 3 | RNVC: 2
85-691-5579: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-230-5058
Open End Wrench

142305058
0102426: RNCC: 3 | RNVC: 2
44-19X21: RNCC: 5 | RNVC: 2
44.19X21: RNCC: 5 | RNVC: 2
91355352: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-480-8106
Spanner Wrench

144808106
A02810-00S400: RNCC: 3 | RNVC: 2
436479-001: RNCC: 5 | RNVC: 9

4 Apr 1996

5120-14-222-7375
Open End Wrench

142227375
20S16X17: RNCC: 3 | RNVC: 2
19-16X17: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-307-8805
Face Spanner Wrench Socket

143078805
330A93-3010-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-501-4165
Flat Tip Screwdriver

145014165
NO PRIMARY REF14-501-4165: RNCC: 3 | RNVC: 2
0005935: RNCC: 5 | RNVC: 2
3148510059358: RNCC: 5 | RNVC: 2
AH.14X250: RNCC: 5 | RNVC: 2
AH14X250: RNCC: 5 | RNVC: 2

29 Oct 1997

5120-14-501-5024
Socket Wrench Socket

145015024
NO PRIMARY REF14-501-5024: RNCC: 3 | RNVC: 2
NNP5120848465866: RNCC: 5 | RNVC: 9

29 Oct 1997

5120-14-242-2054
Spanner Wrench

142422054
552-405MA083DET1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-357-7700
Spanner Wrench

143577700
0404-00300: RNCC: 3 | RNVC: 2
0421-00400: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-442-7122
Pliers

144427122
265-20CH: RNCC: 3 | RNVC: 2

24 Oct 1990

5120-14-274-8648
Pince-Joint

142748648
R31674-7-18REP4: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-271-6997
Valet Detabli Ordin

142716997
4575-28: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-357-9955
Positionneme Broche

143579955
MJN243-22: RNCC: 3 | RNVC: 2
MJN243-22: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-396-2337
Extracteur Support

143962337
90890-02345: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-422-9379
Matrice Sertir Tube

144229379
D12206-04: RNCC: 3 | RNVC: 2

23 Aug 2000

5120-14-328-1083
Socket Wrench Handle Bar

143281083
VTR400-11453: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-491-6234
Cle

144916234
NO PRIMARY REF14-491-6234: RNCC: 3 | RNVC: 2
12146: RNCC: 5 | RNVC: 9
F300 0T 003 6673: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-405-0660
Auge De Macon

144050660
11001002-960-10L: RNCC: 3 | RNVC: 2
2695 951 012: RNCC: 5 | RNVC: 2

20 Nov 1985

5120-14-578-1864
Mechanical Puller

145781864
PAAE223310-PAAE223312-800 029: RNCC: 3 | RNVC: 2

7 Nov 2013

5120-14-460-2865
Sheet Metalworking Stake

144602865
853-930-095-0: RNCC: 3 | RNVC: 2

21 Jan 1993

5120-14-423-2292
Basculeur Cle Dyn

144232292
0747168: RNCC: 3 | RNVC: 2
SP.1735 D-3-1170: RNCC: 5 | RNVC: 2
SP1735D-3-1170: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-515-8511

5120-14-449-8744
Bearing And Bushing Remover

144498744
60713: RNCC: 3 | RNVC: 2
91705849: RNCC: 5 | RNVC: 2

11 Sep 1991

5120-14-511-5470
Six Point Tip Screwdriver Set

145115470
AZXR.JS5: RNCC: 3 | RNVC: 2
3148515007316: RNCC: 5 | RNVC: 2
500731: RNCC: 5 | RNVC: 2

24 Dec 1998

5120-14-553-6991
Spanner Wrench

145536991
20101200: RNCC: 3 | RNVC: 2

10 May 2007

5120-14-506-2692
Flat Tip Screwdriver

145062692
48401015: RNCC: 3 | RNVC: 9
260600: RNCC: 5 | RNVC: 9

17 Apr 1998

5120-14-237-2378
Douille Pour Cle A

142372378
K044BB17AREP5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-490-6912
Chisel

144906912
241 C 00907 000: RNCC: 3 | RNVC: 2
F300 0T 000 1041: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-558-7842
Combination Box And Open End Wrench Set

145587842
MOD.40-1: RNCC: 3 | RNVC: 2

5 Nov 2008

5120-14-331-0508

5120-14-243-0475

5120-14-314-2338
Socket Wrench Socket

143142338
160-71960-34: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-469-0387
Craftsman's Tweezers

144690387
365C2: RNCC: 3 | RNVC: 2
365-C2: RNCC: 3 | RNVC: 2
3272670348264: RNCC: 5 | RNVC: 2

5 Apr 1994

5120-14-406-5742
Locking Device Removal Tool

144065742
853-200-901-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-478-9667
Cle Interieure Modi

144789667
2-50564: RNCC: 3 | RNVC: 2

4 Dec 1995

5120-14-365-0188
Socket Wrench Socket

143650188
S.7/8H: RNCC: 3 | RNVC: 2
3148510550206: RNCC: 5 | RNVC: 2
S7-8H: RNCC: 5 | RNVC: 2
0055020: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-365-1175
Outil D'installatio

143651175
205240C17: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-325-4232
Embou Carre Tournev

143254232
0002240: RNCC: 3 | RNVC: 2
AAM.R: RNCC: 5 | RNVC: 2
AAMR: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-216-5153
Screwdriver Bit

142165153
ST.1/2: RNCC: 3 | RNVC: 2
ST1-2: RNCC: 5 | RNVC: 2
3148515189807: RNCC: 5 | RNVC: 2
0518980: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-216-0034

5120-14-448-9266
Hand Terminal Crimping Tool

144489266
M1002: RNCC: 3 | RNVC: 2

24 Jul 1991

5120-14-295-0769
Spanner Wrench

142950769
0844-78: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-409-5145
Detent Handling Tool

144095145
8814497000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-458-8856
Spanner Wrench

144588856
M35085: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-551-0679
Open End Wrench

145510679
46AM076: RNCC: 3 | RNVC: 2

27 Aug 2006

5120-14-490-6854
Drill

144906854
240 D 01019 000: RNCC: 3 | RNVC: 2
F300 0T 000 0958: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-463-0051
Spanner Wrench

144630051
1444033: RNCC: 3 | RNVC: 2
1444033: RNCC: 5 | RNVC: 2

12 May 1993

5120-14-241-1500
Extracteur Coiffe D

142411500
0723-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-576-3045
Mechanical Puller S

145763045
8811443005: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-347-8874
Socket Wrench Adapter-Extension

143478874
0206100470: RNCC: 3 | RNVC: 2

1 Mar 1978

5120-14-540-9859
Mechanical Puller Attachment

145409859
6519POC110: RNCC: 3 | RNVC: 2

5 May 2004

5120-14-392-4528
Socket Head Screw Key

143924528
ZWZ110400: RNCC: 3 | RNVC: 9

21 Mar 1984

5120-14-460-1942
Fausse Aile Helice

144601942
PL1BV602OX890002B: RNCC: 3 | RNVC: 2

14 Jan 1993

5120-14-436-2606
Outill Arbre Sortie

144362606
82410396: RNCC: 3 | RNVC: 2

12 Dec 1989

5120-14-428-5236
Support Cle

144285236
MFG4412102: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-299-6420
Douille Sertissage

142996420
FF8X1A: RNCC: 3 | RNVC: 2
0T1599: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-452-1294
Bearing And Bushing Inserter And Remover

144521294
45057799: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-353-2607
Screwdriver Bit

143532607
563: RNCC: 3 | RNVC: 2

8 Dec 1978

5120-14-560-7854
Rubber Mallet

145607854
0367600201: RNCC: 3 | RNVC: 2

26 May 2009

5120-14-377-6810

5120-14-275-8969

5120-14-255-0916

5120-14-302-6708
Socket Wrench Socket

143026708
1768-12: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-466-2194
Spanner Wrench

144662194
WFS182-26: RNCC: 3 | RNVC: 2
RAB2039: RNCC: 5 | RNVC: 2

2 Nov 1993

5120-14-323-9973
Screwdriver Bit

143239973
313181: RNCC: 3 | RNVC: 2
85-686-0804: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-344-7619
Screwdriver Bit Set And Handle

143447619
SDM80: RNCC: 3 | RNVC: 2
85-689-2490: RNCC: 6 | RNVC: 9

9 Sep 1977

5120-14-487-0689
Seal Inserter And Remover

144870689
332A93-3136-00: RNCC: 3 | RNVC: 2

2 Apr 1997

5120-14-377-3000
Spanner Wrench

143773000
MH034-23-00: RNCC: 3 | RNVC: 2
MH034-23-00: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-217-2662
Socket Wrench Extension

142172662
M12-043: RNCC: 3 | RNVC: 2
M12-043: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-392-0528
Spanner Wrench

143920528
MHJ449-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-463-2101
Cle Outil Special

144632101
24025: RNCC: 3 | RNVC: 2
85-694-2252: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-384-9226
Equipee Griffe

143849226
9970-121-166: RNCC: 3 | RNVC: 2

2 Jun 1983

5120-14-204-3024
Rallonge Speciale

142043024
M3-058: RNCC: 3 | RNVC: 2
M3-058: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-041-9778
Centrage Bloc

140419778
NO PRIMARY REF14-041-9778: RNCC: 3 | RNVC: 2
229488: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-14-316-9164
Mechanical Puller Adapter

143169164
0761920: RNCC: 3 | RNVC: 2
U.51B5-6: RNCC: 5 | RNVC: 2
EMB0UTU51-27: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-316-5625
Bearing And Bushing Inserter And Remover

143165625
3210-97-31-027: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-398-9690
Flat Tip Screwdriver

143989690
M334-04-89-39: RNCC: 3 | RNVC: 2
453-65170-000: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-391-8640
Reglage Gabarit

143918640
MJN391-22: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-400-3803
Socket Wrench Socket

144003803
A9-32: RNCC: 3 | RNVC: 2
85-457-8530: RNCC: 6 | RNVC: 9

24 Apr 1985

5120-14-386-1568
Socket Wrench Socket

143861568
6801J33-4009-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-429-1854
Torque Wrench Adapter

144291854
P7015-128-0106: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-256-5827
Open End Wrench

142565827
4062-16: RNCC: 3 | RNVC: 9
69-16: RNCC: 5 | RNVC: 2
E74301C16AGF: RNCC: 5 | RNVC: 2
3272670357020: RNCC: 5 | RNVC: 2
CNM69-16: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-393-0266
Spanner Wrench

143930266
125A.80: RNCC: 3 | RNVC: 2
125A80: RNCC: 3 | RNVC: 2
3148511346594: RNCC: 5 | RNVC: 2
CAE00870: RNCC: 5 | RNVC: 2
125-80: RNCC: 5 | RNVC: 2
125.80: RNCC: 5 | RNVC: 2
BLC23045: RNCC: 5 | RNVC: 2
91564503: RNCC: 5 | RNVC: 2
125.A80: RNCC: 5 | RNVC: 2
0134659: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-316-5717
Spanner Wrench

143165717
M2063: RNCC: 3 | RNVC: 2
M2-063: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-519-7369

5120-14-278-5036

5120-14-445-7174
Spanner Wrench

144457174
386864: RNCC: 3 | RNVC: 2
386864-Z3CN18-10: RNCC: 3 | RNVC: 2
386864B: RNCC: 3 | RNVC: 2
70017711: RNCC: 3 | RNVC: 2
386864-Z3CN18-10: RNCC: 5 | RNVC: 9
386864B: RNCC: 5 | RNVC: 9
70017711: RNCC: 5 | RNVC: 9

22 Feb 1991

5120-14-360-4309
Dappui Verin Patin

143604309
CMV9-80: RNCC: 3 | RNVC: 2

23 Nov 1979

5120-14-414-6681
Out Reglage Frein

144146681
365A94-3240-00: RNCC: 3 | RNVC: 2

23 Feb 1987

5120-14-566-6306
Socket Wrench Adapter

145666306
219325-0: RNCC: 3 | RNVC: 2

1 Dec 2010

5120-14-352-3191
De Blocage Cle

143523191
MHN312-01: RNCC: 3 | RNVC: 2
MHN312-01: RNCC: 5 | RNVC: 2
MHJ312-21: RNCC: 5 | RNVC: 2
MHJ312-22: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-435-0709
Pour Goupille Pince

144350709
853-201-273-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-392-0838
Socket Wrench Crowfoot Attachment

143920838
853-115-030-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-490-8703
Meche

144908703
4061 551 120 100: RNCC: 3 | RNVC: 2
F300 0T 000 4943: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-575-9406
Inserter And Remove

145759406
8813734001: RNCC: 3 | RNVC: 2

16 May 2013

5120-14-381-1353
Open End Wrench

143811353
10-30X31-P: RNCC: 3 | RNVC: 2
3272670225930: RNCC: 5 | RNVC: 2
10-30X31P: RNCC: 5 | RNVC: 2
10-30X31CP: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-406-6592
Controle Montage

144066592
853-300-068-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-425-5798
Basculeur Cle Dynam

144255798
0747148: RNCC: 3 | RNVC: 2
SP1735D-3-970: RNCC: 5 | RNVC: 2

9 Jul 1988

5120-14-513-7359
Flat Tip Screwdriver

145137359
ENFD6561-0-8X4X75: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-371-7925
Flat Tip Screwdriver

143717925
253GI2: RNCC: 3 | RNVC: 2
202-0: RNCC: 3 | RNVC: 2
7462: RNCC: 5 | RNVC: 2
85-691-5180: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-237-7104
Cle A Ergots Specia

142377104
NO PRIMARY REF14-237-7104: RNCC: 3 | RNVC: 2
32729: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-279-8330
Cache Poussiere

142798330
002-01-22-020M1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-214-2837
Cle Speciale Pour E

142142837
9970-115-231: RNCC: 3 | RNVC: 2
9970-115-231-01: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-355-3431
Socket Wrench Socket

143553431
RT20273: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-509-3013
Socket Wrench Socket

145093013
3511 191 92871: RNCC: 3 | RNVC: 2

27 Oct 1998

5120-14-214-3286
Socket Wrench Socket

142143286
J.14: RNCC: 3 | RNVC: 2
3148510271804: RNCC: 5 | RNVC: 2
J14: RNCC: 5 | RNVC: 2
0110974S00: RNCC: 5 | RNVC: 2
91352503: RNCC: 5 | RNVC: 2
CAE00912: RNCC: 5 | RNVC: 2
0027180: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-468-9825
Seal Inserter And Remover

144689825
40N108304-3: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-547-7604
Hand Terminal Crimping Tool

145477604
948761-1: RNCC: 3 | RNVC: 2

10 Nov 2005

5120-14-577-6204
Bearing And Bushing Inserter And Remover

145776204
853-203-308-0: RNCC: 3 | RNVC: 2
061434: RNCC: 5 | RNVC: 9

27 Sep 2013

5120-14-387-5020
Outil Reglag Mecani

143875020
915-4-96-30: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-349-4470
Socket Head Screw Key

143494470
NO PRIMARY REF14-349-4470: RNCC: 3 | RNVC: 2
0U134025: RNCC: 5 | RNVC: 9

22 May 1978

5120-14-423-0703
Handling Tool Arm

144230703
P3788: RNCC: 3 | RNVC: 2
P3788-01: RNCC: 5 | RNVC: 2

31 Mar 1988

5120-14-344-3399
Spanner Wrench

143443399
D47615: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-277-2380
Extracteur De Carte

142772380
917431: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-403-2609
Mechanical Puller Attachment

144032609
16806043: RNCC: 3 | RNVC: 2
16806043: RNCC: 3 | RNVC: 9

31 Jul 1985

5120-14-392-4529
Open End Wrench

143924529
E1A000320: RNCC: 3 | RNVC: 9

21 Mar 1984

5120-14-419-7278
Mechanical Puller Adapter

144197278
004823: RNCC: 3 | RNVC: 2
4823: RNCC: 5 | RNVC: 2

5 Nov 1987

5120-14-289-0720
Electrical Contact Inserter And Remover

142890720
001112 300 25: RNCC: 3 | RNVC: 2
9550110890: RNCC: 5 | RNVC: 2
00111230025: RNCC: 5 | RNVC: 2
1112-16: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-040-7379
Pliers

140407379
CF7B: RNCC: 3 | RNVC: 2
C0P41R02391054: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-507-6124
Pliers

145076124
433.LC: RNCC: 3 | RNVC: 2
433LC: RNCC: 5 | RNVC: 2
0176002: RNCC: 5 | RNVC: 9

29 Jul 1998

5120-14-226-4433
Hand Contact Burnisher

142264433
14020: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-263-8165

5120-14-575-4502
Hand Hammer

145754502
200C.40: RNCC: 3 | RNVC: 2

8 Apr 2013

5120-14-375-3648
Pliers

143753648
439: RNCC: 3 | RNVC: 2
91527979: RNCC: 5 | RNVC: 2
162-0683: RNCC: 5 | RNVC: 2
3148511762905: RNCC: 5 | RNVC: 2
FACOM439: RNCC: 5 | RNVC: 9
0176290: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-529-0345
Hand Tube Flaring Tool

145290345
2504-01: RNCC: 3 | RNVC: 2
SYQ0897: RNCC: 5 | RNVC: 2

6 Mar 2002

5120-14-348-0796
Socket Head Screw Key Set

143480796
62TR8: RNCC: 3 | RNVC: 2
62-TR8: RNCC: 3 | RNVC: 2
3272670270596: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-434-7511
Tube Extracteur

144347511
NO PRIMARY REF14-434-7511: RNCC: 3 | RNVC: 2
21C8006REP1: RNCC: 5 | RNVC: 9

3 Oct 1989

5120-14-451-2676
Sertissag Outillage

144512676
MMG047-06: RNCC: 3 | RNVC: 2
MMG047-06: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-465-9777
Deblocage Poignee

144659777
DM3-35751: RNCC: 3 | RNVC: 2
DM3-35751: RNCC: 5 | RNVC: 9

27 Oct 1993

5120-14-362-2135
De Centrage Obus

143622135
30MS017-0000005: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-319-4535
Mechanical Puller Attachment

143194535
3130S95-68-018: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-412-7770
Equilibrage Montage

144127770
NO PRIMARY REF14-412-7770: RNCC: 3 | RNVC: 2
H140AMV215M: RNCC: 5 | RNVC: 9

5 Nov 1986

5120-14-438-5052
Spanner Wrench

144385052
J47943: RNCC: 3 | RNVC: 2
85-694-0751: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-449-7226
Bearing And Bushing Inserter And Remover

144497226
NO PRIMARY REF14-449-7226: RNCC: 3 | RNVC: 2
89280851: RNCC: 5 | RNVC: 2
301A99386: RNCC: 5 | RNVC: 9

4 Sep 1991

5120-14-507-5807
Hand Terminal Crimping Tool

145075807
NO PRIMARY REF14-507-5807: RNCC: 3 | RNVC: 2
S11100112CK66: RNCC: 5 | RNVC: 9

23 Jul 1998

5120-14-436-8676
Socket Head Screw Key

144368676
31407065: RNCC: 3 | RNVC: 9
634145: RNCC: 3 | RNVC: 9
85-694-1383: RNCC: 6 | RNVC: 9

3 Jan 1990

5120-14-305-6680
Screwdriver Bit

143056680
NO PRIMARY REF14-305-6680: RNCC: 3 | RNVC: 2
BL12502: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-253-9393
Extracteur Pour Bil

142539393
NO PRIMARY REF14-253-9393: RNCC: 3 | RNVC: 2
23958: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-513-9722
Open End Wrench

145139722
ENFD29159-4X5: RNCC: 3 | RNVC: 2

21 Apr 1999

5120-14-393-4124
Socket Head Screw Key

143934124
81-12: RNCC: 3 | RNVC: 2
64-M12: RNCC: 3 | RNVC: 2
64.M12: RNCC: 3 | RNVC: 2
3148511225806: RNCC: 5 | RNVC: 2
3272670213760: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-370-4890
Electrical Contact Inserter

143704890
M15515-108: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-302-5050
Pincexreglage Bras

143025050
NO PRIMARY REF14-302-5050: RNCC: 3 | RNVC: 2
42-27-04-026: RNCC: 5 | RNVC: 9

21 Feb 1996

5120-14-422-2332
Socket Head Screw Key

144222332
0436-01-124000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-202-5579
Blacksmith's Bottom Fuller Set

142025579
NO PRIMARY REF14-202-5579: RNCC: 3 | RNVC: 2
74786-13: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-280-2740

5120-14-362-1748
Faux Mors

143621748
C46308: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-031-7538

5120-14-371-5658

5120-14-484-0250
Conducte Extracteur

144840250
39977851: RNCC: 3 | RNVC: 2

17 Oct 1996

5120-14-249-9372

5120-14-405-2660
Outils Tole Support

144052660
005215035P: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-385-3427
Spanner Wrench

143853427
6802P33-6196-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-204-0960
Obus Demmanchement

142040960
3130S95-00-104: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-217-2641
Rallonge De Cle Dyn

142172641
M12-014: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-348-0519
Ergot De Cle

143480519
C46837-2: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-391-2068
Socket Wrench Socket

143912068
M3 1/8: RNCC: 3 | RNVC: 2
3148510322308: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-276-3192
Socket Wrench Socket

142763192
65L13-16: RNCC: 3 | RNVC: 2
S.13/16: RNCC: 3 | RNVC: 2
S-13/16: RNCC: 3 | RNVC: 2
S13-16: RNCC: 3 | RNVC: 2
S13-16: RNCC: 3 | RNVC: 9
3148510545004: RNCC: 5 | RNVC: 2
S13-16: RNCC: 5 | RNVC: 2
3272670243323: RNCC: 5 | RNVC: 2
75S13-16: RNCC: 5 | RNVC: 9
DEMS13-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-226-3114
Vis Dextraction Spe

142263114
60290-01-24M1: RNCC: 3 | RNVC: 2
60290-01-240M1: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-338-9035
Wrench Kit

143389035
8812440000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-530-6362
Bearing And Bushing Inserter And Remover

145306362
U.49AJ1: RNCC: 3 | RNVC: 2
3148515225963: RNCC: 5 | RNVC: 2
U.49J1: RNCC: 5 | RNVC: 2

1 Jul 2002

5120-14-431-7807
Socket Head Screw Key

144317807
0411-60178: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-567-0133
Pin Remover

145670133
7M998: RNCC: 3 | RNVC: 2

27 Jan 2011

5120-14-493-1824
Cle

144931824
229541B: RNCC: 3 | RNVC: 2
F300 0T 011 0143: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-562-8712
Spanner Wrench

145628712
3928-983: RNCC: 3 | RNVC: 2

1 Dec 2009

5120-14-558-0426
Cross Tip Screwdriver

145580426
ANP1X250: RNCC: 3 | RNVC: 2
91883651: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-204-9177

5120-14-243-6151

5120-14-274-8541
Socket Head Screw Key

142748541
E74331-8UJW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-385-3375
Spanner Wrench

143853375
365A93-3351-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-351-9445
Levier En Bout

143519445
99003-40000: RNCC: 3 | RNVC: 2
99003-40000: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-411-2081
Extracteur Compas

144112081
15059W26H: RNCC: 3 | RNVC: 2
100-0000-2-1WU3: RNCC: 5 | RNVC: 2
110-0000-2-1WU3: RNCC: 5 | RNVC: 2
15059-W26H: RNCC: 5 | RNVC: 2
85-692-5702: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-406-9431
A Main Matoir

144069431
853-201-180-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-225-8899

5120-14-284-9916
Spanner Wrench

142849916
116.200: RNCC: 3 | RNVC: 2
116-200: RNCC: 5 | RNVC: 2
3148511338407: RNCC: 5 | RNVC: 2
91486862: RNCC: 5 | RNVC: 2
SYQ5213: RNCC: 5 | RNVC: 2
0133840: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-475-4440
Open End Wrench

144754440
10-13X16: RNCC: 3 | RNVC: 2
85-695-4100: RNCC: 6 | RNVC: 9

5 Apr 1995

5120-14-290-7685
Tariere Quadripole

142907685
2320-03658QIL340: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-533-2184
Mechanical Puller Adapter

145332184
223E646-00: RNCC: 3 | RNVC: 2
223E646-00: RNCC: 5 | RNVC: 9

29 Jan 2003

5120-14-406-5681
Montage Outil

144065681
853-200-720-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-464-9134
Sheet Metalworking Dolly Block

144649134
851-930-541-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-320-0746
Open End Wrench

143200746
D0-6: RNCC: 3 | RNVC: 2
D06: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-231-8230
Cle Speciale Pour E

142318230
9970-115-259: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-424-3423
Socket Head Screw Key

144243423
E74331A2-5U: RNCC: 2 | RNVC: 2
E74331-2-5AU: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-489-3462
Hand Tube Swaging Tool Kit

144893462
853-600-305-0: RNCC: 3 | RNVC: 2

9 Jul 1997

5120-14-378-5558
Btp Plaque Support

143785558
6807J32-1671-00: RNCC: 3 | RNVC: 2
6807360A32-1671-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-472-2287
Socket Head Screw Key

144722287
10093666: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-307-1086
Spanner Wrench

143071086
0392-1000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-471-6585
Socket Wrench Adapter

144716585
EF.6R: RNCC: 3 | RNVC: 2
3148510229256: RNCC: 5 | RNVC: 2
EF6R: RNCC: 5 | RNVC: 2
0022925: RNCC: 5 | RNVC: 9

7 Sep 1994

5120-14-238-1353
Spanner Wrench

142381353
E74323B20AGW: RNCC: 2 | RNVC: 1

1 Jan 1967

5120-14-429-3002
Spanner Wrench

144293002
OUT50408: RNCC: 3 | RNVC: 2
0UT50408: RNCC: 5 | RNVC: 2

11 Jan 1989

5120-14-454-9620
Open End Wrench

144549620
BLC23072: RNCC: 3 | RNVC: 2

30 Apr 1992

5120-14-423-9853
Screwdriver Bit

144239853
0025012: RNCC: 3 | RNVC: 2
ET.102: RNCC: 5 | RNVC: 2
ET102: RNCC: 5 | RNVC: 2
91626508: RNCC: 5 | RNVC: 2

5 May 1988

5120-14-369-9147
Spanner Wrench

143699147
VDP0000AR1AJ002: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-541-7061
Combination Box And Open End Wrench

145417061
40R.14: RNCC: 3 | RNVC: 2
40R.14: RNCC: 5 | RNVC: 2
3148511011867: RNCC: 5 | RNVC: 2

22 Jun 2004

5120-14-413-5846
Pliers

144135846
421: RNCC: 3 | RNVC: 2
0023985K00: RNCC: 5 | RNVC: 2
3148511757307: RNCC: 5 | RNVC: 2
5482AGC14: RNCC: 5 | RNVC: 9
0175730: RNCC: 5 | RNVC: 9

17 Dec 1986

5120-14-223-5310

5120-14-393-8788
Emmanchement Outil

143938788
NO PRIMARY REF14-393-8788: RNCC: 3 | RNVC: 2
OU139108: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-505-9362
Preformed Packing Inserter

145059362
K117120M: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-343-1824
Pose Filet R Broche

143431824
01500610020: RNCC: 3 | RNVC: 2
01556100010: RNCC: 5 | RNVC: 2
01500610020: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-321-5587
Screwdriver Bit

143215587
AMS.2: RNCC: 3 | RNVC: 2
3148510082400: RNCC: 5 | RNVC: 2
AMS2: RNCC: 5 | RNVC: 2
18513920-4: RNCC: 5 | RNVC: 2
0008240: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-479-0633
Face Spanner Wrench Socket

144790633
OCE82-16L: RNCC: 3 | RNVC: 2
1115960S00: RNCC: 5 | RNVC: 2

13 Dec 1995

5120-14-320-9453
Retaining Ring Pliers

143209453
3310-016: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-352-3200
Outil De Controle

143523200
MJL363-21: RNCC: 3 | RNVC: 2
MJL363-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-443-9745
Open End Wrench

144439745
GS120-03: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-043-1041
Spanner Wrench

140431041
0762017D00: RNCC: 3 | RNVC: 2
069U20-762017D: RNCC: 5 | RNVC: 2

10 Apr 1984

5120-14-378-1245
Spanner Wrench

143781245
2310-05492: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-14-427-6942
Flat Tip Screwdriver

144276942
NO PRIMARY REF14-427-6942: RNCC: 3 | RNVC: 2
540350: RNCC: 5 | RNVC: 9

4 Nov 1988

5120-14-349-3816
Socket Wrench Socket

143493816
9970-115-680: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-437-3730
Socket Head Screw Key

144373730
22-260-2: RNCC: 3 | RNVC: 2

31 Jan 1990

5120-14-317-0312
Piston Protect Obus

143170312
G1-15-653: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-532-3259
Socket Wrench Socket

145323259
SJ.7/8: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-368-1543
Piston Ring Compressor

143681543
16929414: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-249-9432
Socket Wrench Socket

142499432
0028080: RNCC: 3 | RNVC: 2
J.16L: RNCC: 5 | RNVC: 2
J16L: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-213-3789
Spanner Wrench

142133789
1-1038-02-17: RNCC: 3 | RNVC: 2
1-1038-02-17: RNCC: 5 | RNVC: 9
1-1038-02-17: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-231-8234
Emmanche-Bague Anti

142318234
9970-115-295: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-354-9706
Arrache Piquet

143549706
NO PRIMARY REF14-354-9706: RNCC: 3 | RNVC: 2
C124036: RNCC: 5 | RNVC: 9

20 Feb 1979

5120-14-316-9175
Flat Tip Screwdriver

143169175
AB.8X100: RNCC: 3 | RNVC: 2
3148510033006: RNCC: 5 | RNVC: 2
AB8X100: RNCC: 5 | RNVC: 2
6238-28061: RNCC: 5 | RNVC: 2
0003300: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-345-5184
Socket Wrench Socket

143455184
STMD8: RNCC: 3 | RNVC: 2
85-688-9550: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-435-7338
Collage Outillage

144357338
62-01-101A106094: RNCC: 3 | RNVC: 2
85-801-2682: RNCC: 6 | RNVC: 9

22 Nov 1989

5120-14-512-2162
Socket Head Screw Key

145122162
4374-0015: RNCC: 3 | RNVC: 2

8 Feb 1999

5120-14-302-4008
Screwdriver Bit

143024008
703A95-0000-23: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-442-5697
Socket Wrench Socket

144425697
GS66-10: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-14-280-3995
Spanner Wrench

142803995
17639: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-416-7643
Fixation Support

144167643
540399: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-427-0606
Socket Wrench Extension

144270606
M4Z6021910702: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-431-7790
Spanner Wrench

144317790
0411-60131: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-575-8079
Torque Wrench

145758079
1780210948: RNCC: 3 | RNVC: 2

3 May 2013

5120-14-200-9851
Open End Wrench

142009851
41W00990000: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-488-9482
Face Spanner Wrench Socket

144889482
38145: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-228-5126

5120-14-307-0679

5120-14-304-0376

5120-14-292-0784
Appareil Levage

142920784
NO PRIMARY REF14-292-0784: RNCC: 3 | RNVC: 2
145J58-59: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-457-4459
Pince

144574459
NO PRIMARY REF14-457-4459: RNCC: 3 | RNVC: 2
TT66: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-338-4805
Cone De Montage

143384805
S16-0607-0901: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-041-7613
Spanner Wrench

140417613
N425-07: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-438-8804
Socket Head Screw Key Blade

144388804
1698-090B650: RNCC: 3 | RNVC: 2
0860935K00: RNCC: 5 | RNVC: 2
1698-090B650: RNCC: 5 | RNVC: 9

11 Apr 1990

5120-14-274-1922
Open End Wrench

142741922
NO PRIMARY REF14-274-1922: RNCC: 3 | RNVC: 2
MLE1937M208: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-362-1737
Coupelle Dappui

143621737
C1-46756: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-483-1208
Socket Wrench Socket

144831208
J.3/4F: RNCC: 3 | RNVC: 2
3148510279145: RNCC: 5 | RNVC: 2
0027914: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-384-1984
Faux Mors

143841984
26-281-6: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-406-6205
Embout Cannele

144066205
853-201-655-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-406-6113
Extraction Outil

144066113
853-201-812-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-283-3908
Emmanche-Joint Tori

142833908
9970-115-308: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-311-4545
Bearing And Bushing Remover

143114545
3160S95-42-009: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-378-5525
Bearing And Bushing Inserter

143785525
6802J33-2042-20: RNCC: 3 | RNVC: 2
6802360A33-2042-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-446-8983
Torque Wrench Adapter

144468983
11.21: RNCC: 3 | RNVC: 2
11-21: RNCC: 5 | RNVC: 2
3148510927152: RNCC: 5 | RNVC: 2
91629352: RNCC: 5 | RNVC: 2
0092715: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-265-0489
Mechanical Puller Attachment

142650489
330A93-3106-23: RNCC: 3 | RNVC: 2
330A93-3106-2300: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-514-2272
Handling Tool Arm

145142272
A05555-11-2100: RNCC: 3 | RNVC: 2
J05555-11-1000: RNCC: 5 | RNVC: 9
J05555-11-0900: RNCC: 5 | RNVC: 9
91MM175V0319A: RNCC: 6 | RNVC: 9

30 Apr 1999

5120-14-222-7153
Open End Wrench

142227153
524-24X25: RNCC: 3 | RNVC: 9
33-24X25: RNCC: 5 | RNVC: 2
DEM524-24X25: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-568-8044
Socket Head Screw Key

145688044
6883 1241-303: RNCC: 3 | RNVC: 2

6 Jul 2011

5120-14-505-9242
Flat Tip Screwdriver

145059242
ENFD6514-A0-8X4X100X195: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-466-7503
Spanner Wrench

144667503
3511 193 12021: RNCC: 3 | RNVC: 2
3511-193-12021: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-224-2527
Combination Box And Open End Wrench

142242527
40.5H: RNCC: 3 | RNVC: 2
3148511000403: RNCC: 5 | RNVC: 2
40-5H: RNCC: 5 | RNVC: 2
0184578Q00: RNCC: 5 | RNVC: 2
250-4554: RNCC: 5 | RNVC: 2
91386968: RNCC: 5 | RNVC: 2
0100040: RNCC: 5 | RNVC: 9
FACOM40.5H: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-422-2330
Socket Wrench Spanner Attachment

144222330
0436-01-122000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-272-3716
Open End Wrench

142723716
E74302R15-17BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-415-5693
Mechanical Puller Attachment

144155693
6802F31-4126-00: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-201-9860
Mattock

142019860
NO PRIMARY REF14-201-9860: RNCC: 3 | RNVC: 2
5601CHA2-320B: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-241-1633
Electrical Contact Remover

142411633
8400-322: RNCC: 3 | RNVC: 2
603-016: RNCC: 5 | RNVC: 2
91357211: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-441-2222
Bearing And Bushing Inserter And Remover

144412222
6801V32-3170-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-386-1541
Support Montag Roue

143861541
6801J32-1025-22: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-222-1456
Cross Tip Screwdriver

142221456
NO PRIMARY REF14-222-1456: RNCC: 3 | RNVC: 2
A271P2: RNCC: 5 | RNVC: 2
23-002: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-201-8781
Open End Wrench

142018781
44S5X7: RNCC: 3 | RNVC: 2
10NC5X7: RNCC: 3 | RNVC: 2
HK1-46: RNCC: 5 | RNVC: 2
13L5X7: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-431-2569
Open End Wrench

144312569
330A93-6311-20: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-521-3878
Embouts De Visseuse

145213878
359-8: RNCC: 3 | RNVC: 2

21 Jul 2000

5120-14-343-8373

5120-14-561-5706
Screwdriver Bit

145615706
ETORM.203/8: RNCC: 3 | RNVC: 2
3148516398833: RNCC: 5 | RNVC: 2
639883: RNCC: 5 | RNVC: 2

29 Jul 2009

5120-14-488-3145
Screwdriver Bit Set And Handle

144883145
AFM.2: RNCC: 3 | RNVC: 2
0005201: RNCC: 5 | RNVC: 2
3148510052014: RNCC: 5 | RNVC: 2
AFM2: RNCC: 5 | RNVC: 2
0613 5: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-552-6140
Socket Wrench Socket

145526140
S.11AVSE: RNCC: 3 | RNVC: 2
S.11AVSE: RNCC: 5 | RNVC: 2
3148510560342: RNCC: 5 | RNVC: 2

18 Jan 2007

5120-14-305-6016
Socket Wrench Socket

143056016
K.55A: RNCC: 3 | RNVC: 2
3148510295350: RNCC: 5 | RNVC: 2
0029535: RNCC: 5 | RNVC: 9
K55: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-465-4709
Face Spanner Wrench Socket

144654709
851-500-157-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-215-9609
Cle Plate De Diamet

142159609
773-411-003F3-83X77X5: RNCC: 3 | RNVC: 2
773-411-003FF3-83X5X77X5: RNCC: 5 | RNVC: 9
773-411-003F3-83X77X5: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-334-8064
Socket Wrench Socket

143348064
0051680: RNCC: 3 | RNVC: 2
R.1/2L: RNCC: 5 | RNVC: 2
R1-2L: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-399-2022
Mechanical Puller Attachment

143992022
0-51706-11: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-570-7643
Cross Tip Screwdriver

145707643
TB-2P125: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-532-3257
Socket Wrench Socket

145323257
SJ.3/4: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-200-9452
Open End Wrench

142009452
3-1-1-8X1-1-4: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-348-0522
Mechanical Puller Adapter

143480522
C46947-3: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-209-4208
Flat Tip Screwdriver

142094208
303-2: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-323-1986
Cross Tip Screwdriver

143231986
181-4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-032-0406
Screwdriver Bit

140320406
0-01198: RNCC: 3 | RNVC: 2
2739-8: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-568-4799
Electrical Connector Inserter

145684799
8819345000: RNCC: 3 | RNVC: 2

7 Jun 2011

5120-14-206-8260
Mattock

142068260
E78003PI0CHE0EILR0ND40: RNCC: 2 | RNVC: 2

1 Jan 1964

5120-14-360-7799
Socket Head Screw Key

143607799
AR633: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-530-7456
Spring Inserter And Remover

145307456
AC21974100: RNCC: 3 | RNVC: 2

3 Jul 2002

5120-14-264-1579
Open End Wrench

142641579
10A3: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-451-9720
Screwdriver Bit

144519720
0025208: RNCC: 3 | RNVC: 2
ET.608: RNCC: 5 | RNVC: 2

16 Dec 1991

5120-14-451-6330
Electrical Contact Remover

144516330
34E: RNCC: 3 | RNVC: 2
34E: RNCC: 5 | RNVC: 2

27 Nov 1991

5120-14-385-3442
Bague Chauffante

143853442
6803P32-1680-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-246-6980
Open End Wrench

142466980
E74-301-105: RNCC: 2 | RNVC: 2
69-105: RNCC: 3 | RNVC: 2
E74301C105WWF: RNCC: 5 | RNVC: 1
3272670275942: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-467-2773
Face Spanner Wrench Socket

144672773
NO PRIMARY REF14-467-2773: RNCC: 3 | RNVC: 2
RAB2307: RNCC: 5 | RNVC: 2
70179377: RNCC: 5 | RNVC: 9

23 Dec 1993

5120-14-289-8513
Electrical Contact Remover

142898513
M15514-16: RNCC: 3 | RNVC: 2
M15514-16A: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-355-3469
Spanner Wrench

143553469
321A95-0021-00: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-262-9681
Spanner Wrench

142629681
35-130930: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-396-4139
Spanner Wrench

143964139
6274-51030: RNCC: 3 | RNVC: 2
6274-2822220: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-528-3488
Handling Tool Arm

145283488
C04/3820: RNCC: 3 | RNVC: 2

23 Jan 2002

5120-14-574-1812
Box Wrench

145741812
1-13-323: RNCC: 3 | RNVC: 2
E113323: RNCC: 5 | RNVC: 9

13 Dec 2012

5120-14-374-0894
Etau Support

143740894
UHK103-41: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-427-7618
Spanner Wrench

144277618
NO PRIMARY REF14-427-7618: RNCC: 3 | RNVC: 2
E0949638: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-223-2520
Cle Pour Bague De R

142232520
D2604-97: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-417-7939
Hand Terminal Crimping Tool

144177939
360-21: RNCC: 3 | RNVC: 2

27 Jul 1987

5120-14-334-2128
Spanner Wrench

143342128
BR4X506BIS: RNCC: 3 | RNVC: 2
4X506BIS: RNCC: 5 | RNVC: 2
TL3443: RNCC: 5 | RNVC: 2
85-100-4922: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-431-4833
Socket Head Screw Key

144314833
0372-42-10501: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-511-7672
Adjustable Wrench

145117672
MO-69003: RNCC: 3 | RNVC: 2

15 Jan 1999

5120-14-326-2707
Mechanical Puller Attachment

143262707
330A93-3074-20: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-393-4135
Socket Head Screw Key

143934135
85-168: RNCC: 3 | RNVC: 2
3148511258309: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-229-2684
Dispositif De Bloca

142292684
VTR250-1070-10701-10704-10709-1-: RNCC: 3 | RNVC: 1

1 Jan 1967

5120-14-332-4337
Socket Head Screw Key

143324337
222-0024-001: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-497-9287
Detent Handling Tool

144979287
NO PRIMARY REF14-497-9287: RNCC: 3 | RNVC: 2
6184MT001-037: RNCC: 5 | RNVC: 9

27 Oct 1997

5120-14-042-3575
Pre-Sertissage Bloc

140423575
RMPS3F6X0-5M: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-274-8683
Bague De Cone

142748683
R31674-18-18R32: RNCC: 3 | RNVC: 2
33352AREP4: RNCC: 5 | RNVC: 2
33352REP4: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-334-8052
Socket Wrench Socket

143348052
0051310: RNCC: 3 | RNVC: 2
R.11L: RNCC: 5 | RNVC: 2
R11L: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-232-9944
Matrice De Sertissa

142329944
45241-2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-558-1373
Hand Hammer

145581373
202H.1 1/2: RNCC: 3 | RNVC: 2
752456: RNCC: 3 | RNVC: 2
3148517524569: RNCC: 5 | RNVC: 2

4 Sep 2008

5120-14-222-7163
Open End Wrench

142227163
16 1-2X19-32IN: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-433-1362
Socket Wrench Socket

144331362
K.23LA: RNCC: 3 | RNVC: 2
3148510301150: RNCC: 5 | RNVC: 2
91628215: RNCC: 5 | RNVC: 2
0030115: RNCC: 5 | RNVC: 9

11 Jul 1989

5120-14-370-1141
Tap And Reamer Wrench

143701141
831.2: RNCC: 3 | RNVC: 2
130127: RNCC: 5 | RNVC: 2
831-2: RNCC: 5 | RNVC: 2
0657 2: RNCC: 5 | RNVC: 2
0206620: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-401-7256
Screwdriver Bit

144017256
0-01194: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-530-2043
Retaining Ring Pliers

145302043
197G.9: RNCC: 3 | RNVC: 2
3148511457009: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-472-4422
Socket Wrench Adapter-Extension

144724422
22351524-9: RNCC: 3 | RNVC: 2

25 Oct 1994

5120-14-253-9432
Cle Pour Ecrou Ec3

142539432
2594440: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-314-6230

5120-14-228-6021

5120-14-384-6259
Electrical Card Extractor

143846259
16928989: RNCC: 3 | RNVC: 2
16928989: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-426-5579
Electronic Equipment Alignment Tool

144265579
16449483: RNCC: 3 | RNVC: 2
16449483: RNCC: 3 | RNVC: 9

8 Sep 1988

5120-14-418-1534
Socket Wrench Socket

144181534
3203119: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-274-1921
Pince A Cintrer A L

142741921
364FH5-8: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-521-5317
Socket Wrench Socket

145215317
K.33HA: RNCC: 3 | RNVC: 2
K33HA: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-416-6463
Socket Head Screw Key

144166463
27402592-6: RNCC: 3 | RNVC: 2

23 Jun 1987

5120-14-326-1270
G Presse De Serrage

143261270
C0E907: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-406-9490
Reglage Douille

144069490
853-201-885-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-375-0527
Cle A Panier

143750527
GSM196-010F11: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-406-6530
Filete Jet

144066530
853-200-410-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-215-0223

5120-14-299-6507
Screw Thread Insert Inserter

142996507
01500410000: RNCC: 3 | RNVC: 2
0150-04M10: RNCC: 5 | RNVC: 2
32241070: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-358-6464
Open End Wrench

143586464
M31-120: RNCC: 3 | RNVC: 2
M31120: RNCC: 5 | RNVC: 2
M31-120: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-423-4230
Basculeur Cle Dyn

144234230
SP1735D-3-1080: RNCC: 3 | RNVC: 2

19 Apr 1988

5120-14-357-3413
Spanner Wrench

143573413
E74-323-300A350: RNCC: 2 | RNVC: 2

7 Jun 1979

5120-14-436-8679
Socket Head Screw Key

144368679
31407062: RNCC: 3 | RNVC: 9
634148: RNCC: 3 | RNVC: 9
85-694-1380: RNCC: 6 | RNVC: 9

3 Jan 1990

5120-14-274-8350
Hand Abrasive Wheel Dresser

142748350
5487-13: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-263-8209

5120-14-291-8208

5120-14-516-9019
Socket Wrench Socket

145169019
R.1/4E: RNCC: 3 | RNVC: 2
00.43.96.31: RNCC: 5 | RNVC: 2

20 Oct 1999

5120-14-331-5571
Spanner Wrench

143315571
2-75005: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-415-4713
Demontage Outil

144154713
4716: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-410-6161
Hand Screw Jack Extension

144106161
2C368-01: RNCC: 3 | RNVC: 2
6734-09: RNCC: 5 | RNVC: 2
9120068780: RNCC: 5 | RNVC: 2
9120068780: RNCC: 5 | RNVC: 2

9 Jul 1986

5120-14-506-2479
Cross Tip Screwdriver

145062479
NO PRIMARY REF14-506-2479: RNCC: 3 | RNVC: 2
3148510041827: RNCC: 5 | RNVC: 2
ACPB.0X40: RNCC: 5 | RNVC: 2

15 Apr 1998

5120-14-356-5635
Socket Head Screw Key

143565635
E74331-10AL: RNCC: 2 | RNVC: 2

15 May 1979

5120-14-356-5968
Spanner Wrench

143565968
TF10A32512: RNCC: 3 | RNVC: 2
85-688-6569: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-316-5624
Bearing And Bushing Inserter And Remover

143165624
3210-97-31-026-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-476-3251
Socket Wrench Socket

144763251
R.4LA: RNCC: 3 | RNVC: 2
3148510512259: RNCC: 5 | RNVC: 2
235-3930: RNCC: 5 | RNVC: 2
0051225: RNCC: 5 | RNVC: 9
FACOMR.4LA: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-514-1221
Six Point Tip Screwdriver

145141221
ENFD6566-1-2X6-5X150: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-479-0320
Socket Wrench Socket

144790320
888-377-000-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-260-2938
Poignee Pour Fraise

142602938
S16-0122-0800: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-234-3351
Bearing And Bushing Remover

142343351
U.28: RNCC: 3 | RNVC: 2
U28: RNCC: 5 | RNVC: 2
91509047: RNCC: 5 | RNVC: 2
3148510674001: RNCC: 5 | RNVC: 2
0000983800: RNCC: 5 | RNVC: 2
TAR24A: RNCC: 5 | RNVC: 2
5000260828: RNCC: 5 | RNVC: 2
5000260038: RNCC: 5 | RNVC: 2
5000260038: RNCC: 5 | RNVC: 9
5000260828: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-230-0638
Electronic Equipment Alignment Tool

142300638
176-2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-522-8878
Screwdriver Bit

145228878
46007959: RNCC: 3 | RNVC: 2
8023920P00: RNCC: 5 | RNVC: 2
46007959: RNCC: 5 | RNVC: 2

6 Dec 2000

5120-14-398-0999
Screwdriver Bit

143980999
SP1604: RNCC: 3 | RNVC: 2
16491892-5: RNCC: 5 | RNVC: 2

31 Jan 1985

5120-14-219-2188

5120-14-219-2224

5120-14-466-7446
Socket Wrench Socket

144667446
3511 191 92831: RNCC: 3 | RNVC: 2
3511-191-92831: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-043-1040
Spanner Wrench

140431040
0762016C00: RNCC: 3 | RNVC: 2
069U20-762016C: RNCC: 5 | RNVC: 2

10 Apr 1984

5120-14-241-1443
Cle A Ergots Specia

142411443
0610-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-442-6678
Fixed Open End Wrench Set

144426678
68507-237-1: RNCC: 3 | RNVC: 9

24 Oct 1990

5120-14-393-8860
Emmanchemen Berceau

143938860
NO PRIMARY REF14-393-8860: RNCC: 3 | RNVC: 2
OU138370: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-406-3613
Tournevis De Reglag

144063613
NO PRIMARY REF14-406-3613: RNCC: 3 | RNVC: 2
398569: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-427-7616
Spanner Wrench

144277616
NO PRIMARY REF14-427-7616: RNCC: 3 | RNVC: 2
E0949636: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-427-2523
Spanner Wrench

144272523
488402M83-06P12: RNCC: 3 | RNVC: 2

6 Oct 1988

Load More Results