What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 87 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 87 of 110

5120-14-491-0184
Douille

144910184
4602 008 200 002: RNCC: 3 | RNVC: 2
F300 0T 001 0973: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-427-0811
Outillage Mandrin

144270811
536711: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-295-5828

5120-14-267-1510

5120-14-306-5959

5120-14-404-0916
Equipee Lame

144040916
NO PRIMARY REF14-404-0916: RNCC: 3 | RNVC: 2
7702131: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-241-1442
Cle A Ergots Specia

142411442
0609-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-285-6424

5120-14-575-1743
Open End Wrench

145751743
10680068000: RNCC: 3 | RNVC: 1

18 Mar 2013

5120-14-452-1358
Seal Inserter And Remover

144521358
226445: RNCC: 3 | RNVC: 2
89414929: RNCC: 5 | RNVC: 2
226445: RNCC: 5 | RNVC: 2

18 Dec 1991

5120-14-215-2397
Adaptateur Special

142152397
PR46305: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-493-6973
Screwdriver Bit

144936973
EH.210: RNCC: 3 | RNVC: 2
3148510233918: RNCC: 5 | RNVC: 2
EH-210: RNCC: 5 | RNVC: 2
EH210: RNCC: 5 | RNVC: 2
0161378P00: RNCC: 5 | RNVC: 2
0023391: RNCC: 5 | RNVC: 9

13 Oct 1997

5120-14-336-1836

5120-14-427-0737
Flat Tip Screwdriver

144270737
ATH.8EX175: RNCC: 3 | RNVC: 2
3148510115801: RNCC: 5 | RNVC: 2
ATH8EX175: RNCC: 5 | RNVC: 2
0127615P00: RNCC: 5 | RNVC: 2
0011580: RNCC: 5 | RNVC: 9

6 Oct 1988

5120-14-280-3946
Spanner Wrench

142803946
45258: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-391-7807
Blocage Cle

143917807
0-600190-1: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-488-6403
Six Point Tip Screwdriver

144886403
AZXR.10X75: RNCC: 3 | RNVC: 2
3148510134796: RNCC: 5 | RNVC: 2
AZXR10X75: RNCC: 5 | RNVC: 2
176-0927: RNCC: 5 | RNVC: 2
0013479: RNCC: 5 | RNVC: 9
FACOMAZXR.10X75: RNCC: 5 | RNVC: 9

26 May 1997

5120-14-498-0841
Wrench

144980841
NO PRIMARY REF14-498-0841: RNCC: 3 | RNVC: 2
2 685 900: RNCC: 5 | RNVC: 9
2 685 900: RNCC: 5 | RNVC: 9
F300 0T 002 6408: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-389-1714
Cartouche Cle

143891714
6313-57934: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-296-0181
Sheet Metalworking Dolly Block

142960181
874: RNCC: 3 | RNVC: 2
3148512098805: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-393-4120
Socket Head Screw Key

143934120
81-5: RNCC: 3 | RNVC: 2
64-M5: RNCC: 3 | RNVC: 2
64.M5: RNCC: 3 | RNVC: 2
3272670227217: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-244-9021
Socket Wrench Socket

142449021
M.63: RNCC: 3 | RNVC: 2
M63: RNCC: 5 | RNVC: 2
3148510318103: RNCC: 5 | RNVC: 2
0031810: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-486-4095
Swivel Knob Jeweler's Screwdriver

144864095
ARE.0,8X13: RNCC: 3 | RNVC: 2
3148510109107: RNCC: 5 | RNVC: 2
0613 460 01: RNCC: 5 | RNVC: 2
0010910: RNCC: 5 | RNVC: 9

18 Mar 1997

5120-14-497-8791
Screwdriver Bit

144978791
EH.101/4: RNCC: 3 | RNVC: 2
3148510233628: RNCC: 5 | RNVC: 2
EH.101/4: RNCC: 5 | RNVC: 2
0023362: RNCC: 5 | RNVC: 9

22 Oct 1997

5120-14-541-4717
Craftsman's Tweezers

145414717
144.Z: RNCC: 3 | RNVC: 2
1135098A00: RNCC: 5 | RNVC: 2

10 Jun 2004

5120-14-484-4605
Socket Head Screw Key

144844605
82H.1/2: RNCC: 3 | RNVC: 2
3148511236819: RNCC: 5 | RNVC: 2
1096795B00: RNCC: 5 | RNVC: 2
0715 311 40: RNCC: 5 | RNVC: 2
SYQ5190: RNCC: 5 | RNVC: 2
0123681: RNCC: 5 | RNVC: 9

21 Nov 1996

5120-14-548-4124
Socket Wrench Handle

145484124
R.140A: RNCC: 3 | RNVC: 2

13 Jan 2006

5120-14-559-8986
Mechanical Puller

145598986
U.49PJ3: RNCC: 3 | RNVC: 2
3148516948236: RNCC: 5 | RNVC: 2

3 Mar 2009

5120-14-285-3470

5120-14-264-0598

5120-14-563-9406
Socket Wrench Socket

145639406
TMF S8: RNCC: 3 | RNVC: 2
TMF-S8: RNCC: 5 | RNVC: 2

29 Mar 2010

5120-14-453-3697
Socket Head Screw Key

144533697
853-390-062-0: RNCC: 3 | RNVC: 2

19 Feb 1992

5120-14-469-0390
Socket Head Screw Key Set

144690390
63-TR8: RNCC: 3 | RNVC: 2
63TR8: RNCC: 3 | RNVC: 2
3272670246713: RNCC: 5 | RNVC: 2

5 Apr 1994

5120-14-411-2087
Spanner Wrench

144112087
110-420-04W26H: RNCC: 3 | RNVC: 2
110-420-04-W26H: RNCC: 5 | RNVC: 2
85-692-5693: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-360-9796
Extracteur Manuel

143609796
STM07605: RNCC: 3 | RNVC: 2
STM076-05: RNCC: 5 | RNVC: 2
STM076-05: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-223-8255
Speciale Cle

142238255
70020838: RNCC: 3 | RNVC: 2
211191-ACIER: RNCC: 3 | RNVC: 2
70020838: RNCC: 5 | RNVC: 9
211191-ACIER: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-369-6983
Socket Head Screw Key

143696983
170-3-860: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-418-9853
Extracteur

144189853
27393283-8: RNCC: 3 | RNVC: 2

28 Sep 1987

5120-14-442-8357
5 Lames Jeu

144428357
V.750A2: RNCC: 3 | RNVC: 2
3148510778730: RNCC: 5 | RNVC: 2
V750A2: RNCC: 5 | RNVC: 2
0077873: RNCC: 5 | RNVC: 9

7 Nov 1990

5120-14-383-3229

5120-14-469-9054
Open End Wrench

144699054
46.15VSE: RNCC: 3 | RNVC: 2
3148511056509: RNCC: 5 | RNVC: 2
0105650: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-521-6350
Torque Wrench Adapter

145216350
SP.3107: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-559-1569
Electro Tag Syringe

145591569
SERINGUE A INSERER: RNCC: 3 | RNVC: 2

10 Dec 2008

5120-14-288-6976
Bague De Montage

142886976
D1553-4826: RNCC: 3 | RNVC: 2
D1553-4826: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-436-1067
Protecteur Cone

144361067
716554: RNCC: 3 | RNVC: 2

5 Dec 1989

5120-14-311-2977
Machoire Tendeur A

143112977
0350-413: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-576-1211
Ratchet Wrench

145761211
467S.8: RNCC: 3 | RNVC: 2
3148518195935: RNCC: 5 | RNVC: 2
819593: RNCC: 5 | RNVC: 2

30 May 2013

5120-14-490-6928
File

144906928
241 F 01103 000: RNCC: 3 | RNVC: 2
F300 0T 000 1058: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-249-0669
Cle A Fourche

142490669
1108: RNCC: 3 | RNVC: 2
720707: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-509-4540

5120-14-435-3300
Outil Extraction

144353300
00113230400: RNCC: 3 | RNVC: 2

7 Nov 1989

5120-14-426-4057
Equipe Reglable Vis

144264057
2492800: RNCC: 3 | RNVC: 2
2498043: RNCC: 5 | RNVC: 9
FOE2492800: RNCC: 5 | RNVC: 9

30 Aug 1988

5120-14-570-2030
Seal Inserter

145702030
UFA31776: RNCC: 3 | RNVC: 2

28 Nov 2011

5120-14-430-3483
Coup Douille Mesure

144303483
RT17828: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-458-5833
Douille De Montage

144585833
9689160315: RNCC: 3 | RNVC: 2
DLP756810: RNCC: 5 | RNVC: 2

27 Oct 1992

5120-14-228-5220

5120-14-444-3474
Socket Wrench Socket

144443474
GS86L-03: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-496-9172
Socket Head Screw Key

144969172
490127-33001-02: RNCC: 3 | RNVC: 2
F300 0T 022 2669: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-352-3166
Montage Joint Obus

143523166
MGE312-22: RNCC: 3 | RNVC: 2
MGE312-22: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-236-2615
Spanner Wrench

142362615
80900-40: RNCC: 3 | RNVC: 2
77256-1B: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-324-4296
Spanner Wrench

143244296
D1553-4846: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-327-8701
A Agrafe Pince

143278701
NO PRIMARY REF14-327-8701: RNCC: 3 | RNVC: 2
ZIGZAG: RNCC: 5 | RNVC: 9
85-676-6510: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-545-5447
Wrench Extension Handle

145455447
61026602AA: RNCC: 3 | RNVC: 2

19 Apr 2005

5120-14-538-3717
Solid Center Punch

145383717
NGM0010036240078: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-236-8757
Spanner Wrench

142368757
0605-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-204-3004
Cle Speciale

142043004
M3-032: RNCC: 3 | RNVC: 2
M3-032: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-393-8804
Mandrin De Position

143938804
NO PRIMARY REF14-393-8804: RNCC: 3 | RNVC: 2
OU139106: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-570-6365
Six Point Tip Screwdriver

145706365
TB-7X50: RNCC: 3 | RNVC: 2

12 Jan 2012

5120-14-288-6585
Tamis De Macon

142886585
000243005M: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-357-7639
Flat Tip Screwdriver

143577639
07603-0060100: RNCC: 3 | RNVC: 2
07603-0060100: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-511-8642
Socket Wrench Socket Set

145118642
R.2PB: RNCC: 3 | RNVC: 2
3148515887789: RNCC: 5 | RNVC: 2

27 Jan 1999

5120-14-454-9000
Bearing And Bushing Inserter And Remover

144549000
U.49D2: RNCC: 3 | RNVC: 2
3148510702322: RNCC: 5 | RNVC: 2
U49D2: RNCC: 5 | RNVC: 2
91729323: RNCC: 5 | RNVC: 2
0070232: RNCC: 5 | RNVC: 9

24 Apr 1992

5120-14-484-6515
Socket Wrench Socket

144846515
R.8F: RNCC: 3 | RNVC: 2
3148510511061: RNCC: 5 | RNVC: 2
0051106: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-271-6094

5120-14-384-1383
Tirant Cle Tarage

143841383
8814466000: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-478-0889
Modu Extraction Cle

144780889
412558: RNCC: 3 | RNVC: 2

11 Oct 1995

5120-14-323-4746
Cle Pour Diaphragme

143234746
61795: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-490-9502
Pince

144909502
4355 761 127 317: RNCC: 3 | RNVC: 2
F300 0T 000 7278: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0147
Cle

144910147
4602 007 200 080: RNCC: 3 | RNVC: 2
F300 0T 001 0933: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-316-5608

5120-14-317-0492
Outil De Goupillage

143170492
NO PRIMARY REF14-317-0492: RNCC: 3 | RNVC: 2
RT6581: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-554-6477
Socket Wrench Extension

145546477
NS.215A: RNCC: 3 | RNVC: 2

31 Jul 2007

5120-14-364-7896
Bearing And Bushing Inserter

143647896
16849151: RNCC: 3 | RNVC: 2
16849151: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-443-9567
Socket Wrench Socket

144439567
W270M: RNCC: 3 | RNVC: 9

17 Dec 1990

5120-14-416-0212
Open End Wrench

144160212
M4Z6021900921: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-493-2979
Cle De Secou

144932979
256133: RNCC: 3 | RNVC: 2
F300 0T 012 1166: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-216-6720

5120-14-568-3940
Socket Wrench Socket

145683940
M.90HA: RNCC: 3 | RNVC: 2
3148516635174: RNCC: 5 | RNVC: 2
663517: RNCC: 5 | RNVC: 2

27 May 2011

5120-14-559-6591
Mechanical Puller

145596591
8813387000: RNCC: 3 | RNVC: 2

4 Feb 2009

5120-14-399-0943
Mechanical Puller Attachment

143990943
MS21534-16: RNCC: 3 | RNVC: 2
MS27534-16: RNCC: 5 | RNVC: 2
MS27534-16: RNCC: 5 | RNVC: 2
91630876: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-366-5691
Spanner Wrench

143665691
360A93-3220-20: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-523-9987
Hand Terminal Crimping Tool

145239987
7792100: RNCC: 3 | RNVC: 2
313-166: RNCC: 5 | RNVC: 2

20 Feb 2001

5120-14-315-1891
Chasse-Joint

143151891
0-701829-1-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-373-4914
Miroir De Rechange

143734914
829-1: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-241-2826
Cle A Ergot Emmanch

142412826
101371: RNCC: 3 | RNVC: 2
101371: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-508-8443
Socket Head Screw Key Set

145088443
PB.89R: RNCC: 3 | RNVC: 2

30 Sep 1998

5120-14-434-9074
Open End Wrench

144349074
433436: RNCC: 3 | RNVC: 2
GESM827560: RNCC: 5 | RNVC: 2

9 Oct 1989

5120-14-503-0906
Socket Head Screw Crowfoot Wrench Attachment

145030906
EN206: RNCC: 3 | RNVC: 2

7 Jan 1998

5120-14-421-6311
Socket Wrench Crowfoot Attachment

144216311
210110: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-393-1883
Socket Head Screw Key

143931883
111517: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-483-0608
Spanner Wrench

144830608
10441585: RNCC: 3 | RNVC: 2

8 Aug 1996

5120-14-491-2153
Bearing And Bushing Inserter And Remover

144912153
132018: RNCC: 3 | RNVC: 2
F300 0T 001 9061: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-360-6652
Bearing Staking Installation Tool

143606652
8810007047: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-323-8253
Spanner Wrench

143238253
0046-73ATS606: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-297-3720
Mechanical Puller Attachment

142973720
15152908: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-538-2427
Bearing And Bushing Inserter And Remover

145382427
NGM0010033751158: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-371-0247
Electrical Card Extractor

143710247
15456985: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-302-6700
Open End Wrench

143026700
RACC13: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-368-0570
Spanner Wrench

143680570
25545867500: RNCC: 3 | RNVC: 2
255458675: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-239-9909
Open End Wrench

142399909
135363: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-471-2469
Cross Tip Screwdriver

144712469
45285464: RNCC: 3 | RNVC: 2
45285464: RNCC: 3 | RNVC: 9

10 Aug 1994

5120-14-468-4631
Electrical Contact Remover

144684631
30394572C: RNCC: 3 | RNVC: 2
30394572C: RNCC: 5 | RNVC: 2

3 Mar 1994

5120-14-249-6766
Cle A Ergots Specia

142496766
2-02531: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-526-7890
Socket Head Screw Key

145267890
132222: RNCC: 3 | RNVC: 2

5 Sep 2001

5120-14-575-8166
Bearing And Bushing Inserter

145758166
8812749001: RNCC: 3 | RNVC: 2

6 May 2013

5120-14-304-3121
Cone De Guidage

143043121
C46926: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-234-3708

5120-14-520-9926
Hand Screw Starter

145209926
AFUX.2: RNCC: 3 | RNVC: 2

28 Jun 2000

5120-14-200-9335
Socket Wrench Socket

142009335
S.1'1/8: RNCC: 3 | RNVC: 2
S1 1-8: RNCC: 5 | RNVC: 2
3148510546209: RNCC: 5 | RNVC: 2
0054620: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-490-6842
Drill

144906842
240 D 00706 000: RNCC: 3 | RNVC: 2
F300 0T 000 0946: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-289-8506
Electrical Contact Remover

142898506
M15519-16B: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-420-4978
Percage Outil

144204978
1754503: RNCC: 3 | RNVC: 9

10 Dec 1987

5120-14-318-7973
Pistolet Extr Goupi

143187973
001141063S: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-574-5055
Socket Wrench Socket

145745055
S.15HLA: RNCC: 3 | RNVC: 2
054105: RNCC: 5 | RNVC: 2
3148510541051: RNCC: 5 | RNVC: 2
54105: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-14-437-5323
Spanner Wrench

144375323
0490-210002: RNCC: 3 | RNVC: 2

7 Feb 1990

5120-14-437-7411
Face Spanner Wrench Socket

144377411
9689160992: RNCC: 3 | RNVC: 2
9689160992: RNCC: 5 | RNVC: 2

14 Feb 1990

5120-14-355-2021
Socket Wrench Extension

143552021
206512: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-200-9308

5120-14-574-4772
Mechanical Finger

145744772
TM1079P010: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-14-437-8185
Spanner Wrench

144378185
095463P: RNCC: 3 | RNVC: 2
09573: RNCC: 5 | RNVC: 2

21 Feb 1990

5120-14-292-7396
Socket Wrench Screwdriver Attachment

142927396
RM3: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-456-8204
Bearing And Bushing Remover

144568204
45057754: RNCC: 3 | RNVC: 2
45057754: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-537-1289
Open End Wrench

145371289
SP.14134: RNCC: 3 | RNVC: 2

1 Oct 2003

5120-14-383-5140
Electrical Card Extractor

143835140
16928980: RNCC: 3 | RNVC: 2
16928980: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-489-0324
Combination Box And Open End Wrench

144890324
39.16: RNCC: 3 | RNVC: 2
3148510998886: RNCC: 5 | RNVC: 2
0099888: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-537-3069
Spanner Wrench

145373069
6802POC: RNCC: 3 | RNVC: 2

17 Oct 2003

5120-14-570-2309
Face Spanner Wrench Socket

145702309
UFA31654: RNCC: 3 | RNVC: 2

30 Nov 2011

5120-14-447-4940
Jet Bronze

144474940
GAMMM12CUSN12PJET181-5X119X1000: RNCC: 2 | RNVC: 2

27 May 1991

5120-14-454-9594
Six Point Tip Screwdriver

144549594
AEX.9X75: RNCC: 3 | RNVC: 2
3148510049809: RNCC: 5 | RNVC: 2
104-4225: RNCC: 5 | RNVC: 2
0613 463 05: RNCC: 5 | RNVC: 2
004980: RNCC: 5 | RNVC: 9
FACOMAEX.9X75: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-438-9632
Pliers

144389632
330A98-2158-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-550-6232
Torque Wrench Adapter

145506232
27181463-1: RNCC: 3 | RNVC: 2

3 Jul 2006

5120-14-040-5894
Hand Terminal Crimping Tool

140405894
69352: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-236-5516
Bung Wrench

142365516
NO PRIMARY REF14-236-5516: RNCC: 3 | RNVC: 2
1149: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-445-9749
Cross Tip Screwdriver

144459749
TX210: RNCC: 3 | RNVC: 2
85-694-4817: RNCC: 6 | RNVC: 9

27 Feb 1991

5120-14-521-5419
Socket Wrench Socket

145215419
NO PRIMARY REF14-521-5419: RNCC: 3 | RNVC: 2
3148510291284: RNCC: 5 | RNVC: 2
JB.14: RNCC: 5 | RNVC: 2
0029128: RNCC: 5 | RNVC: 9

16 Aug 2000

5120-14-232-6811
Socket Wrench Handle

142326811
M120: RNCC: 3 | RNVC: 2
V2-95-001: RNCC: 5 | RNVC: 2
RT20650: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-246-5221
Open End Wrench

142465221
70-42X45: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-232-7907
Spanner Wrench

142327907
NO PRIMARY REF14-232-7907: RNCC: 3 | RNVC: 2
B4C309687: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-373-8900
Pince A Cercler

143738900
UMA12: RNCC: 3 | RNVC: 2
91396592: RNCC: 5 | RNVC: 2

8 Dec 1981

5120-14-241-1508
Cle A Ergots Specia

142411508
0759-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-247-9646
Poignee Cle A Douil

142479646
RT20563: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-490-6942
Gage

144906942
241 G 00158 000: RNCC: 3 | RNVC: 2
F300 0T 000 1075: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-424-9038
Wire Twister Pliers

144249038
851-115-008-0: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-479-0362
Socket Wrench Crowfoot Attachment

144790362
888-375-200-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-477-1857
Seal Inserter And Remover

144771857
F109963B: RNCC: 3 | RNVC: 2
70040739: RNCC: 5 | RNVC: 2
GD410411800VARIANTE01: RNCC: 5 | RNVC: 2
RAR1942: RNCC: 5 | RNVC: 2

28 Jul 1995

5120-14-381-5011
Socket Wrench Handle Bar

143815011
1106241100: RNCC: 3 | RNVC: 2
62411: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-236-4566
Craftsman's Tweezers

142364566
A37009: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-291-8173

5120-14-490-6941
Funnel

144906941
241 F 03576 000: RNCC: 3 | RNVC: 2
F300 0T 000 1073: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-212-9120
Cle A Oeil Speciale

142129120
9970-115-031: RNCC: 3 | RNVC: 2
9970-115-031-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-484-0376
Segment Monte

144840376
OU138364-1: RNCC: 3 | RNVC: 2
OU138364-1: RNCC: 5 | RNVC: 2
OU138364-1: RNCC: 5 | RNVC: 9
F300 0T 020 6666: RNCC: 6 | RNVC: 9

17 Oct 1996

5120-14-315-1864
Mechanical Puller Attachment

143151864
0-64240-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-309-1710
Screwdriver Bit

143091710
506-2: RNCC: 3 | RNVC: 9
506N2: RNCC: 5 | RNVC: 2
MUL506-2: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-219-4110
Obus De Montage

142194110
17-9-35: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-358-9991
Electrical Card Extractor

143589991
4134386: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-340-7982
Spanner Wrench

143407982
14369-5002: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-571-6990
Ratchet Wrench

145716990
67.13: RNCC: 3 | RNVC: 2

24 Apr 2012

5120-14-303-6306
Open End Wrench

143036306
D31: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-458-2624
Open End Wrench

144582624
008238222S: RNCC: 3 | RNVC: 2

15 Oct 1992

5120-14-366-8480
De Centrage Obus

143668480
30MS089-0000008: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-412-5198
Leveling-Support Jack

144125198
NO PRIMARY REF14-412-5198: RNCC: 3 | RNVC: 2
41008000: RNCC: 5 | RNVC: 9

15 Oct 1986

5120-14-550-3094
Slip Joint Pliers

145503094
181.G: RNCC: 3 | RNVC: 2

15 Jun 2006

5120-14-546-5953
Drift

145465953
MLT266030300: RNCC: 3 | RNVC: 2

21 Jul 2005

5120-14-437-4303
Socket Wrench Socket

144374303
16380917: RNCC: 3 | RNVC: 2
16380917: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-383-9563
Combination Open End And Spanner Wrench

143839563
36013: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-534-9735
Open End Wrench

145349735
47139618: RNCC: 3 | RNVC: 2

23 Apr 2003

5120-14-487-5287
Spanner Wrench

144875287
61AM004A: RNCC: 3 | RNVC: 2

10 Apr 1997

5120-14-530-1276
Socket Wrench Screwdriver Attachment

145301276
NSX.45A: RNCC: 3 | RNVC: 2
3148515106460: RNCC: 5 | RNVC: 2

17 May 2002

5120-14-314-8169
Electrical Connector Pin Straightener

143148169
42069: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-238-7376

5120-14-264-7901

5120-14-424-9395
Open End Wrench

144249395
210356: RNCC: 3 | RNVC: 2

15 Jun 1988

5120-14-369-7610
Spanner Wrench

143697610
F46403: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-463-3687
Preformed Packing Inserter And Remover

144633687
16380195: RNCC: 3 | RNVC: 2
16380195: RNCC: 5 | RNVC: 9

9 Jun 1993

5120-14-491-6091
Spanner Wrench

144916091
079804: RNCC: 3 | RNVC: 2
F300 0T 003 6007: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-530-8548
Socket Head Screw Key Set

145308548
126421: RNCC: 3 | RNVC: 2
3148511264218: RNCC: 5 | RNVC: 2
87H.JU8: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-532-2542
Combination Box And Open End Wrench

145322542
40R.19: RNCC: 3 | RNVC: 2
40R.19: RNCC: 5 | RNVC: 2

23 Oct 2002

5120-14-541-6353
Spring Inserter And Remover

145416353
F26837000: RNCC: 3 | RNVC: 2
F26837000: RNCC: 5 | RNVC: 2

16 Jun 2004

5120-14-399-2020
Spanner Wrench

143992020
E4213: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-314-4891
Spanner Wrench

143144891
M2D61053: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-457-8424
Open End Wrench

144578424
M4HZ7101946301: RNCC: 3 | RNVC: 2

24 Sep 1992

5120-14-375-8066
Bearing And Bushing Inserter

143758066
300A99884: RNCC: 3 | RNVC: 2
91387756: RNCC: 5 | RNVC: 2
300A99884: RNCC: 5 | RNVC: 2
300A99884: RNCC: 5 | RNVC: 9
300A99884: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-441-7218
Socket Wrench Adapter

144417218
F46842: RNCC: 3 | RNVC: 2

12 Sep 1990

5120-14-415-4423
Socket Wrench Socket

144154423
M4Z6021910425: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-040-6422
Clamp Base Bench Vise

140406422
4212-60: RNCC: 3 | RNVC: 2
25: RNCC: 3 | RNVC: 2
DOL25: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-362-4008
Spanner Wrench

143624008
095072: RNCC: 3 | RNVC: 2
095072P: RNCC: 5 | RNVC: 2

19 Mar 1980

5120-14-562-4564
Slip Joint Pliers

145624564
181.25CPE: RNCC: 3 | RNVC: 2
777477: RNCC: 5 | RNVC: 2

27 Oct 2009

5120-14-490-6915
Clamp

144906915
241 C 01704 000: RNCC: 3 | RNVC: 2
F300 0T 000 1044: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-338-4807
Cone De Montage

143384807
S16-0607-1801: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-325-3140
Spanner Wrench

143253140
NO PRIMARY REF14-325-3140: RNCC: 3 | RNVC: 2
8198: RNCC: 5 | RNVC: 9
85-623-5100: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-430-3446
Preformed Packing Inserter

144303446
RT17384: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-536-3686
Socket Wrench Socket

145363686
47211076: RNCC: 3 | RNVC: 2

29 Jul 2003

5120-14-522-2435
Bearing And Bushing Inserter And Remover Set

145222435
TC3037G001: RNCC: 3 | RNVC: 2

11 Oct 2000

5120-14-371-3601
Pliers

143713601
442: RNCC: 3 | RNVC: 2
3148511763209: RNCC: 5 | RNVC: 2
0176320: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-308-8482
Spanner Wrench

143088482
45815: RNCC: 3 | RNVC: 2
45815: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-256-0465
Extracteur De Roule

142560465
325-4122: RNCC: 3 | RNVC: 2
325-4122: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-333-3879

5120-14-275-8161
Bearing And Bushing Inserter And Remover

142758161
8810500000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-304-3129
Faux Mors

143043129
PR47335: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-377-8690
Hand Terminal Crimping Tool

143778690
654148-1: RNCC: 3 | RNVC: 2
85-691-8743: RNCC: 6 | RNVC: 9

10 Jun 1982

5120-14-442-5441
Socket Wrench Socket

144425441
JB.7/16: RNCC: 3 | RNVC: 2
JB-7-16: RNCC: 5 | RNVC: 2
3148510291505: RNCC: 5 | RNVC: 2
0029150: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-215-9610
Cle Etoilee Hexagon

142159610
773-411-003F4-38X5SURPLATS: RNCC: 3 | RNVC: 2
773-411-003F4-38X5SURPLATS: RNCC: 5 | RNVC: 9
773-411-003FF4-38X5SURPLATS: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-346-3767
Etage Quatre Cle

143463767
9970-125-083: RNCC: 3 | RNVC: 2

12 Dec 1977

5120-14-517-1759
Open End Wrench

145171759
G040Z010-000-0007: RNCC: 3 | RNVC: 2

15 Nov 1999

5120-14-530-2024
Socket Wrench Socket

145302024
R.5/16EL: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-530-2023
Socket Wrench Socket

145302023
R.3/16EL: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-348-0524
Eq Extracteur Ecrou

143480524
C46947-5: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-432-7193
Socket Wrench Crowfoot Attachment

144327193
OUT50127: RNCC: 3 | RNVC: 2
0UT50127: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-459-0022
Socket Wrench Handle Bar

144590022
5000790206: RNCC: 3 | RNVC: 2
5000790206: RNCC: 5 | RNVC: 2

11 Nov 1992

5120-14-578-1978
Mechanical Puller S

145781978
8819653003: RNCC: 3 | RNVC: 2

12 Nov 2013

5120-14-327-5426
Open End Wrench

143275426
474015: RNCC: 3 | RNVC: 2
474015: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-431-6182
Electrical Contact Inserter

144316182
8572-22: RNCC: 3 | RNVC: 2

26 Apr 1989

5120-14-040-6320
Spanner Wrench

140406320
21-01-305245: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-272-3725
Open End Wrench

142723725
E74302R21-23BAW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-571-2267
Vise Jaw Caps

145712267
1223.M1: RNCC: 3 | RNVC: 2
FACOM 1223.M1: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-14-490-6845
Drill

144906845
240 D 00715 000: RNCC: 3 | RNVC: 2
F300 0T 000 0949: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-232-9197
Outil Pour Emmanche

142329197
70208: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-273-7086

5120-14-256-1517

5120-14-483-5082
Echange Jonc Bague

144835082
332A93-4208-00: RNCC: 3 | RNVC: 2

18 Sep 1996

5120-14-566-3231
Screwdriver Bit

145663231
ETORM.606: RNCC: 3 | RNVC: 2
639779: RNCC: 5 | RNVC: 2
3148516397799: RNCC: 5 | RNVC: 2

5 Nov 2010

5120-14-219-2214

5120-14-480-4011
Levier De Purge

144804011
230304: RNCC: 3 | RNVC: 2

7 Mar 1996

5120-14-253-5840

5120-14-435-1958
Pliers

144351958
188.20CPY: RNCC: 3 | RNVC: 2
188.20CPY: RNCC: 5 | RNVC: 2
3148511433201: RNCC: 5 | RNVC: 2
SYQ5655: RNCC: 5 | RNVC: 2
0143320: RNCC: 5 | RNVC: 9

25 Oct 1989

5120-14-527-8649
Open End Wrench

145278649
E2C001230000101: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-430-3118
Mechanical Puller Gear Adapter

144303118
29031021: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-416-8872
Face Spanner Wrench Socket

144168872
46AM103: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-451-7688
Screw Thread Insert Inserter

144517688
0504070: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-420-1008
Face Spanner Wrench Socket

144201008
8813870005: RNCC: 3 | RNVC: 2

18 Nov 1987

5120-14-429-4165
Socket Wrench Extension

144294165
H8502SP4REP12: RNCC: 3 | RNVC: 2

23 Jan 1989

5120-14-521-6373
Socket Head Screw Key

145216373
89S.30: RNCC: 3 | RNVC: 2
0695 177 959: RNCC: 5 | RNVC: 2
0126978: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-453-7266
Spanner Wrench

144537266
139860W: RNCC: 3 | RNVC: 2

5 Mar 1992

5120-14-527-3772
Final Drive Assembly Alignment Pin

145273772
H127092: RNCC: 3 | RNVC: 2

24 Oct 2001

5120-14-438-3949
Retaining Ring Pliers

144383949
0178510: RNCC: 3 | RNVC: 2

20 Mar 1990

5120-14-538-8383
Battery Filler Cap Wrench

145388383
NGM0021010400226: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-501-7904
Quick Adjusting Screw Clamp

145017904
NO PRIMARY REF14-501-7904: RNCC: 3 | RNVC: 2
4067 270 001 376: RNCC: 5 | RNVC: 9
75120 240 5618: RNCC: 5 | RNVC: 9
2 610 200: RNCC: 5 | RNVC: 9
300 039 198: RNCC: 5 | RNVC: 9
F300 0T 000 5193: RNCC: 6 | RNVC: 9

10 Nov 1997

5120-14-031-9127
Flat Tip Screwdriver

140319127
AFR.3X100: RNCC: 3 | RNVC: 2
3148510055503: RNCC: 5 | RNVC: 2
AFR3X100: RNCC: 5 | RNVC: 2
0177093R00: RNCC: 5 | RNVC: 2
91569693: RNCC: 5 | RNVC: 2
162-5880: RNCC: 5 | RNVC: 2
0613 170 3: RNCC: 5 | RNVC: 2
0005550: RNCC: 5 | RNVC: 9
FACOMAFR.3X100: RNCC: 5 | RNVC: 9

5 Jul 1980

5120-14-405-6285
Spanner Wrench

144056285
851-500-555-0: RNCC: 3 | RNVC: 2
OXB501-009-100-21R: RNCC: 5 | RNVC: 2

4 Dec 1985

5120-14-311-1702
Open End Wrench

143111702
0102350: RNCC: 3 | RNVC: 2
44-3-2X4: RNCC: 5 | RNVC: 2
44.3,2X4: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-325-2811
Screwdriver Bit Set And Handle

143252811
152: RNCC: 3 | RNVC: 2
152: RNCC: 3 | RNVC: 2
1444: RNCC: 5 | RNVC: 2
51-3: RNCC: 5 | RNVC: 9
85-684-9030: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-233-1159
Splicing Sleeve Compressing Tool

142331159
410032-00: RNCC: 3 | RNVC: 2
K: RNCC: 5 | RNVC: 2
KK: RNCC: 5 | RNVC: 2
KK410-32: RNCC: 5 | RNVC: 2
PINCEAMANCH0NNERKK: RNCC: 5 | RNVC: 2
91357807: RNCC: 5 | RNVC: 2
410032-00: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-373-6058
Joint Monte Douille

143736058
1-0265-063: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-349-3844
Socket Wrench Crowfoot Attachment

143493844
9970-115-633: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-244-9001
Blacksmith's Vise

142449001
4226-210: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-236-4632
Spanner Wrench

142364632
NO PRIMARY REF14-236-4632: RNCC: 3 | RNVC: 2
B4C317529: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-256-0765
Rotating Members Aligning Tool

142560765
851.261.106: RNCC: 3 | RNVC: 2
STUBS3-8 190: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-434-7873
Sheet Metalworking Stake

144347873
853-670-047-0: RNCC: 3 | RNVC: 2

4 Oct 1989

5120-14-417-0262
Cle Desa.Injecteurs

144170262
8-0117AJ: RNCC: 3 | RNVC: 2
131220: RNCC: 5 | RNVC: 2
9409765550: RNCC: 5 | RNVC: 2
9765-55: RNCC: 5 | RNVC: 2

30 Jun 1987

5120-14-201-4599
Flat Tip Screwdriver

142014599
E74-351-1-5: RNCC: 2 | RNVC: 1

1 Jan 1962

5120-14-315-1863
Mechanical Puller Attachment

143151863
0-64184-6: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-255-2933
Spanner Wrench

142552933
8-0515: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-299-8318
Socket Wrench Socket

142998318
M.82: RNCC: 3 | RNVC: 2
M82: RNCC: 5 | RNVC: 2
3148510319605: RNCC: 5 | RNVC: 2
0031960: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-421-6276
Spanner Wrench

144216276
0437-100100: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-244-9012
Open End Wrench

142449012
44-38X42CP: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-040-7380
Retaining Ring Pliers

140407380
NO PRIMARY REF14-040-7380: RNCC: 3 | RNVC: 2
C0P41P1572: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-244-4094
Open End Wrench

142444094
10-9X11: RNCC: 3 | RNVC: 2
10-9X11C: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-358-3623
Open End Wrench

143583623
522CM18X19: RNCC: 3 | RNVC: 9
DEM522CM18X19: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-338-4750

5120-14-253-3861
Poignee Pour Cle

142533861
044BBC14BPL2PC18: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-498-7132
Cle

144987132
703608: RNCC: 3 | RNVC: 2
703608: RNCC: 5 | RNVC: 9
F300 0T 008 2026: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-514-3868
Screwdriver Bit

145143868
ENFD6526AC2X12: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-542-7406
Wrench Kit

145427406
50061609: RNCC: 3 | RNVC: 2

6 Aug 2004

5120-14-451-5380
Spring Inserter And Remover

144515380
45057837: RNCC: 3 | RNVC: 2
F117136C: RNCC: 5 | RNVC: 2
45057837: RNCC: 5 | RNVC: 9

21 Nov 1991

5120-14-224-7447
Socket Head Screw Key

142247447
E74331-10BEK: RNCC: 2 | RNVC: 2

1 Jan 1966

5120-14-262-9314
Socket Wrench Handle Bar

142629314
NO PRIMARY REF14-262-9314: RNCC: 3 | RNVC: 2
144K194: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-203-1234
Saddler's Harness Awl

142031234
907-10: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-220-5170
Outillage Demmanche

142205170
3160S95-65-020: RNCC: 3 | RNVC: 2
3160-95-65-020: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-297-6182
Spanner Wrench

142976182
1-1038-02-00-01: RNCC: 3 | RNVC: 9
1-1038-02-00-01: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-552-0513
Socket Wrench Socket

145520513
R.11/32LA: RNCC: 3 | RNVC: 2
00.44.24.59: RNCC: 5 | RNVC: 2
3148510516059: RNCC: 5 | RNVC: 2

22 Nov 2006

5120-14-513-9467
Flat Tip Screwdriver

145139467
ENFD6560-1-6X8X125: RNCC: 3 | RNVC: 2

19 Apr 1999

5120-14-386-7320
Montage Joint Outil

143867320
16909258: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-352-2005

5120-14-410-3459
Bearing And Bushing Inserter And Remover

144103459
8813929000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-531-9256
Electrical Contact Inserter

145319256
DAK95S22MB: RNCC: 3 | RNVC: 2

25 Sep 2002

5120-14-310-5990
Spanner Wrench

143105990
45816: RNCC: 3 | RNVC: 2
45816: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-332-3831
Face Spanner Wrench Socket

143323831
M31-058: RNCC: 3 | RNVC: 2
MS31-58: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-398-6808
Outil De Calage

143986808
16019040A: RNCC: 3 | RNVC: 2
JD254: RNCC: 5 | RNVC: 2

31 Jan 1985

5120-14-300-2080

5120-14-289-1529

5120-14-436-0174
Montage Embrayage

144360174
RT19897: RNCC: 3 | RNVC: 2
161808: RNCC: 5 | RNVC: 9

29 Nov 1989

5120-14-201-2364

5120-14-490-6967
Neddle

144906967
241 N 00167 000: RNCC: 3 | RNVC: 2
F300 0T 000 1109: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-238-5424

5120-14-031-9144
Open End Wrench

140319144
0102462: RNCC: 3 | RNVC: 2
1C1021540: RNCC: 5 | RNVC: 2
44-26X29: RNCC: 5 | RNVC: 2
44.26X29: RNCC: 5 | RNVC: 2
FACOM 44-26X29: RNCC: 5 | RNVC: 2
SYQ4962: RNCC: 5 | RNVC: 2
33-26-29: RNCC: 5 | RNVC: 2
33-26X29: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-493-0040
Cle

144930040
4065 030 000 358: RNCC: 3 | RNVC: 2
F300 0T 009 4374: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-232-9925

5120-14-521-6409
Open End Wrench

145216409
112917: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-415-1555
Pliers

144151555
1253-14B0: RNCC: 3 | RNVC: 2

16 Apr 1987

5120-14-442-6800
Spanner Wrench

144426800
OUT7558: RNCC: 3 | RNVC: 2
0UT7558: RNCC: 5 | RNVC: 2

24 Oct 1990

5120-14-475-9677
Hand Terminal Crimping Tool

144759677
900812: RNCC: 3 | RNVC: 2
62000471: RNCC: 3 | RNVC: 2
TT864RS: RNCC: 5 | RNVC: 2

16 May 1995

5120-14-447-3461
Craftsman's Tweezers

144473461
140.AAW16: RNCC: 3 | RNVC: 2
140AAW16: RNCC: 5 | RNVC: 2
3148511375204: RNCC: 5 | RNVC: 2
91714850: RNCC: 5 | RNVC: 2
0137520: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-283-1308
Socket Head Screw Key

142831308
T0120BBF5APL8: RNCC: 3 | RNVC: 2
403661T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-344-3073
Cross Tip Screwdriver

143443073
TFC5B: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-566-4400
Mechanical Puller

145664400
62519090AA: RNCC: 3 | RNVC: 2
E92-20660: RNCC: 5 | RNVC: 1

16 Nov 2010

5120-14-210-9876
Open End Wrench

142109876
33-16X18: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-206-7829
Broche De Manutenti

142067829
NO PRIMARY REF14-206-7829: RNCC: 3 | RNVC: 2
0RT8-311: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-426-5808
Socket Head Screw Key

144265808
NO PRIMARY REF14-426-5808: RNCC: 3 | RNVC: 2
E0951636: RNCC: 5 | RNVC: 9

8 Sep 1988

5120-14-345-4247
Outil A Freiner

143454247
9970-125-081: RNCC: 3 | RNVC: 2

5 Oct 1977

5120-14-508-7289
Vise Jaw Caps

145087289
302A92862: RNCC: 3 | RNVC: 2
302A92862: RNCC: 5 | RNVC: 2

29 Sep 1998

5120-14-476-3057
Mechanical Puller Adapter

144763057
884888: RNCC: 3 | RNVC: 2
RAB3873: RNCC: 5 | RNVC: 2
884888: RNCC: 5 | RNVC: 9

6 Jun 1995

5120-14-329-3281
Roulem Positionneur

143293281
14369-5017: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-289-3828

5120-14-324-3246

5120-14-431-7806
Socket Head Screw Key

144317806
0411-60177: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-319-3064
Matrice De Sertissa

143193064
48875: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-338-4740
Coupelle Dappui

143384740
C46751: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-578-2596
Retaining Ring Pliers

145782596
197A.18F: RNCC: 3 | RNVC: 2
0907411: RNCC: 5 | RNVC: 2
3148519074116: RNCC: 5 | RNVC: 2

15 Nov 2013

5120-14-533-0554
Cle Broche

145330554
394910002000: RNCC: 3 | RNVC: 2

21 Jan 2003

5120-14-317-2255
Guide Depose Et Rep

143172255
0S21534: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-456-3063
Mandrin Pour Connec

144563063
11169: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-414-9130
Extracteur Roulemen

144149130
24545912200: RNCC: 3 | RNVC: 2
245459122: RNCC: 5 | RNVC: 9

23 Mar 1987

5120-14-566-3235
Torque Wrench Multiplier

145663235
MC.270A: RNCC: 3 | RNVC: 2
3148516512680: RNCC: 5 | RNVC: 2
651268: RNCC: 5 | RNVC: 2

5 Nov 2010

5120-14-387-9803

5120-14-262-9308
Cle Coudee

142629308
NO PRIMARY REF14-262-9308: RNCC: 3 | RNVC: 2
144H87: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-548-4369
Bearing And Bushing Inserter And Remover

145484369
U.49P9: RNCC: 3 | RNVC: 2

17 Jan 2006

5120-14-424-5658
Socket Wrench Socket

144245658
0027995: RNCC: 3 | RNVC: 2
J-7L: RNCC: 5 | RNVC: 2
J.7L: RNCC: 5 | RNVC: 2

31 May 1988

5120-14-427-2075
Adaptateur Embout

144272075
46AM054101-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-285-1182

5120-14-566-6794
Socket Wrench

145666794
92A.10: RNCC: 3 | RNVC: 2
662928: RNCC: 5 | RNVC: 2

6 Dec 2010

5120-14-223-5347

5120-14-348-6743
Socket Wrench Extension

143486743
24C9105: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-437-9384
Socket Head Screw Key

144379384
101339: RNCC: 3 | RNVC: 2
P027952: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-538-8385
Spanner Wrench

145388385
NGM0021010400265: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-220-7904
Open End Wrench

142207904
RACD18: RNCC: 3 | RNVC: 2
RACD18: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-327-0886
Tige Daccord Equipe

143270886
1065974G1: RNCC: 3 | RNVC: 2
106597G1: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-457-8447
Cle De Pre-Tension

144578447
M4HZ7101954220: RNCC: 3 | RNVC: 2

24 Sep 1992

5120-14-242-9609

5120-14-515-8798
Open End Wrench

145158798
5231: RNCC: 3 | RNVC: 2

20 Aug 1999

5120-14-511-1064
Sheet Metalworking Stake

145111064
2520406: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-434-3562
Pliers

144343562
188.14CPY: RNCC: 3 | RNVC: 2
3148511430200: RNCC: 5 | RNVC: 2
0143020: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-530-2032
Socket Wrench Socket Set

145302032
SV.LJ6: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-426-6789
Speciale Cle

144266789
86783: RNCC: 3 | RNVC: 2

15 Sep 1988

5120-14-351-2154
Spanner Wrench

143512154
489326B: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-297-1102
Magnetic Retrieving Tool

142971102
RT12426: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-503-4636
Electronic Component Inserter And Remover

145034636
29339529: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-329-6333
Socket Head Screw Key Blade

143296333
26-172: RNCC: 3 | RNVC: 2
M31-057: RNCC: 3 | RNVC: 2
M31057: RNCC: 5 | RNVC: 2
26-172: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-265-0915
Obus De Centrage

142650915
330A98-2044-00: RNCC: 3 | RNVC: 2
330A98-2044-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-485-8812
Cle A Volants

144858812
MAT137-0045: RNCC: 3 | RNVC: 2
GSM137-024: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-241-3407
Poignee Pour Fraise

142413407
S16-0122-0400: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-383-0887
Jeu Obturateurs

143830887
9970-121-173: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-304-3136
Cone Mise En Forme

143043136
S16-0605-0301: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-362-7863
Spanner Wrench

143627863
C47828: RNCC: 3 | RNVC: 2
85-691-0780: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-232-7888
Pliers

142327888
NO PRIMARY REF14-232-7888: RNCC: 3 | RNVC: 2
1501-14: RNCC: 5 | RNVC: 9
5448-140: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-248-7465
Cle Speciale

142487465
G1-15-659-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-202-1109
Flat Tip Screwdriver

142021109
NO PRIMARY REF14-202-1109: RNCC: 3 | RNVC: 2
PERFECT74673-200: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-427-7601
Spanner Wrench

144277601
NO PRIMARY REF14-427-7601: RNCC: 3 | RNVC: 2
E0949606: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-378-5531
Btp Plaque Support

143785531
6803J32-1218-01: RNCC: 3 | RNVC: 2
6803360A32-1218-01: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-349-1699
Cale De Reglage

143491699
341A94-2712-01: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-561-1446
Pliers

145611446
3148517933620: RNCC: 3 | RNVC: 2
MODM.CPE1: RNCC: 3 | RNVC: 2
793362: RNCC: 5 | RNVC: 2

19 Jun 2009

5120-14-575-4368
Hand Armament Subsystem Carrier

145754368
14100093074: RNCC: 3 | RNVC: 2

5 Apr 2013

5120-14-493-0067
Lime

144930067
4067 210 000 505: RNCC: 3 | RNVC: 2
F300 0T 009 4432: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-421-2060
Open End Wrench

144212060
10-34X36: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-345-8902
Brake Shoe Adjusting Tool

143458902
055U97-534246E: RNCC: 3 | RNVC: 2
0534246E00: RNCC: 5 | RNVC: 2

5 Nov 1977

5120-14-396-9441
Outil De Serrage

143969441
8814333000: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-343-1830
Pose Filet Rapp Nez

143431830
01500612032: RNCC: 3 | RNVC: 2
01556120021: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-304-6458
Socket Head Screw Key Set

143046458
0126200: RNCC: 3 | RNVC: 2
91571792: RNCC: 5 | RNVC: 2
86JE7A: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-260-3139
Open End Wrench

142603139
PR47157: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-439-3882
Spanner Wrench

144393882
J47975: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-539-8854
Combination Box And Open End Wrench

145398854
37.17: RNCC: 3 | RNVC: 9
3148510987804: RNCC: 5 | RNVC: 9

18 Feb 2004

5120-14-379-9741
Socket Wrench Screwdriver Attachment

143799741
ST.8: RNCC: 3 | RNVC: 2
190211: RNCC: 5 | RNVC: 2
91634324: RNCC: 5 | RNVC: 2
0715 137 080: RNCC: 5 | RNVC: 2
3148515187001: RNCC: 5 | RNVC: 2
ST8: RNCC: 5 | RNVC: 2
0518700: RNCC: 5 | RNVC: 9

20 Oct 1982

5120-14-467-2584
Spanner Wrench

144672584
MEH188-1: RNCC: 3 | RNVC: 2
89280444: RNCC: 5 | RNVC: 2

21 Dec 1993

5120-14-224-8032
Open End Wrench

142248032
13L1 1-4X1 1-2: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-200-9490
Socket Wrench Socket

142009490
M.71: RNCC: 3 | RNVC: 2
3148510318806: RNCC: 5 | RNVC: 2
M71: RNCC: 5 | RNVC: 2
0031880: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-210-9887
Socket Wrench Adapter

142109887
S.203E: RNCC: 3 | RNVC: 2
3148510577203: RNCC: 5 | RNVC: 2
S203E: RNCC: 5 | RNVC: 2
0183450F00: RNCC: 5 | RNVC: 2
91592260: RNCC: 5 | RNVC: 2
91592260: RNCC: 5 | RNVC: 2
0057720: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-443-9694

5120-14-415-6265

5120-14-515-1511
Socket Wrench Screwdriver Attachment

145151511
ENFD6519-D41X85: RNCC: 3 | RNVC: 2
ENFD6519D41X85: RNCC: 3 | RNVC: 2

8 Jul 1999

5120-14-219-4113
Obus De Montage

142194113
17-9-40: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-274-2442

5120-14-416-7520
Plaque D'appui

144167520
537286: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-249-5519
Bague

142495519
PR46981: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-204-8244

5120-14-350-2521

5120-14-357-4323
Manche De Tournevis

143574323
7544: RNCC: 3 | RNVC: 2
XCELITE99-1: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-578-1560
Inserter And Remove

145781560
TM0357P016: RNCC: 3 | RNVC: 2

5 Nov 2013

5120-14-570-2564
Socket Wrench

145702564
UFA31571: RNCC: 3 | RNVC: 2

2 Dec 2011

5120-14-437-9661
Hand Tube Flaring Tool Parts Kit

144379661
M10742: RNCC: 3 | RNVC: 2
M10742: RNCC: 3 | RNVC: 9

28 Feb 1990

5120-14-462-9125
Bearing And Bushing Inserter And Remover

144629125
45057939: RNCC: 3 | RNVC: 2
45057939: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-368-9297
Spanner Wrench

143689297
MUP5400: RNCC: 3 | RNVC: 2

10 Mar 1981

5120-14-220-7910
Open End Wrench

142207910
RACD25: RNCC: 3 | RNVC: 2
RACD25: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-436-0241
Preformed Packing Inserter

144360241
807660: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-437-3571
Spanner Wrench

144373571
J00650-01S140P010: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-306-2368
Socket Head Screw Key

143062368
D1055-16022: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-040-0679
Spanner Wrench

140400679
NO PRIMARY REF14-040-0679: RNCC: 3 | RNVC: 2
BL43957: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-466-3762
Spanner Wrench

144663762
M47589-100: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-405-3181
Axe De Tournevis

144053181
6213-0673: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-471-8644
Spanner Wrench

144718644
Y075-041-100A: RNCC: 3 | RNVC: 2
85-695-2431: RNCC: 6 | RNVC: 9

21 Sep 1994

5120-14-510-7134
Flat Tip Screwdriver

145107134
CK4735-100X4: RNCC: 3 | RNVC: 2

9 Nov 1998

5120-14-432-1229
Extracteur Griffes

144321229
853-202-506-0: RNCC: 3 | RNVC: 2

24 May 1989

5120-14-247-8012
Bearing And Bushing Remover

142478012
3130S95-68-019-1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-386-6758
Reglage Potenti Cle

143866758
150-597: RNCC: 3 | RNVC: 2
150597: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-360-0555
Cle Initiateur

143600555
053W41-542453D: RNCC: 3 | RNVC: 2
0542453D00: RNCC: 5 | RNVC: 2
AMG91064: RNCC: 5 | RNVC: 2

31 Oct 1979

5120-14-329-6383
Open End Wrench

143296383
MHC228-23: RNCC: 3 | RNVC: 2
MHC228-23-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-387-1645
De Montag Outillage

143871645
098022: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-567-4614
Mechanical Puller

145674614
8818171000: RNCC: 3 | RNVC: 2

17 Mar 2011

5120-14-269-4858
Mechanical Puller Attachment

142694858
46510: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-285-7720
Open End Wrench

142857720
RT11209: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-238-1381
Open End Wrench

142381381
875904: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-571-7375
Screwdriver Bit

145717375
E-111-F6.5: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-523-5439
Hand Hose Fitting Swaging Tool Kit

145235439
DLTFRPSKT3108: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-549-4817
Spanner Wrench

145494817
61686942AA: RNCC: 3 | RNVC: 2

10 Apr 2006

5120-14-225-8901

5120-14-504-6972
Solid Center Punch

145046972
488504W: RNCC: 3 | RNVC: 2
5001833564: RNCC: 3 | RNVC: 2

27 Feb 1998

5120-14-370-1159
Stud Inserter And Remover

143701159
287AJS4: RNCC: 3 | RNVC: 2
287JS4: RNCC: 5 | RNVC: 2
130163: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-534-6705
Hand Tube Swaging Punch

145346705
2526 213: RNCC: 3 | RNVC: 2
XX070125: RNCC: 6 | RNVC: 9

2 Apr 2003

5120-14-299-3006
Drift

142993006
28447: RNCC: 3 | RNVC: 2
28447: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-412-8216
Spanner Wrench

144128216
0481-200070: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-521-8448
Screwdriver Bit Extension

145218448
8026802F00: RNCC: 3 | RNVC: 2

20 Sep 2000

5120-14-494-1083
Pliers

144941083
700004: RNCC: 3 | RNVC: 2
F300 0T 015 4798: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-432-3748
Outillage Mandrin

144323748
540208: RNCC: 3 | RNVC: 2
00540208: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-391-8615
Spanner Wrench

143918615
MHJ439-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-379-5190
Spanner Wrench

143795190
NO PRIMARY REF14-379-5190: RNCC: 3 | RNVC: 2
7511-181-27042: RNCC: 5 | RNVC: 9
85-691-2963: RNCC: 6 | RNVC: 9

1 Oct 1982

5120-14-298-1089
Ensemble De Montage

142981089
330A93-3108-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-481-8449
Torque Wrench Adapter

144818449
12.13: RNCC: 3 | RNVC: 2
91769983: RNCC: 5 | RNVC: 2
3148510928807: RNCC: 5 | RNVC: 2
0092880: RNCC: 5 | RNVC: 9

4 Jun 1996

5120-14-279-1579
Screwdriver And Wrench Assembly

142791579
L282064: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-446-8324
Cross Tip Screwdriver

144468324
0003890: RNCC: 3 | RNVC: 2
ACD.0X75: RNCC: 5 | RNVC: 2
ACD0X75: RNCC: 5 | RNVC: 2
H24175: RNCC: 5 | RNVC: 2
ACD.0X75: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-371-9718
Contre-Cle

143719718
8812040001: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-284-1945
Manual Impact Wrench

142841945
NK.301AE: RNCC: 3 | RNVC: 2
3148515095191: RNCC: 5 | RNVC: 2
NK301AE: RNCC: 5 | RNVC: 2
0509519: RNCC: 5 | RNVC: 9
NK301E: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-285-6415

5120-14-422-2245
Socket Head Screw Key

144222245
0503-300300: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-246-0558
Socket Wrench Handle Bar

142460558
15137T14: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-317-8211
Spanner Wrench

143178211
589210: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-440-0833
Torque Wrench Adapter

144400833
11.32: RNCC: 3 | RNVC: 2
3148510927459: RNCC: 5 | RNVC: 2
91629356: RNCC: 5 | RNVC: 2
0092745: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-277-3502
Spanner Wrench

142773502
8810310002: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-438-3510
Bearing And Bushing Inserter

144383510
330A98-7540-20: RNCC: 3 | RNVC: 2

14 Mar 1990

5120-14-321-8079
Bearing And Bushing Inserter And Remover

143218079
3160-95-33-131: RNCC: 3 | RNVC: 2
3160S95-33-131: RNCC: 5 | RNVC: 2
85-689-0959: RNCC: 6 | RNVC: 9
85-695-4667: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-420-6262
Spanner Wrench

144206262
0467-200200: RNCC: 3 | RNVC: 2
O467-200200: RNCC: 5 | RNVC: 2

16 Dec 1987

5120-14-438-1202
Spanner Wrench

144381202
16-140-02: RNCC: 3 | RNVC: 2

7 Mar 1990

5120-14-450-3784
Bearing Staking Installation Tool

144503784
NO PRIMARY REF14-450-3784: RNCC: 3 | RNVC: 2
BL54022: RNCC: 5 | RNVC: 9

1 Oct 1991

5120-14-404-0359
Mechanical Puller Attachment

144040359
NO PRIMARY REF14-404-0359: RNCC: 3 | RNVC: 2
BL36495: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-545-6557
Screwdriver Bit

145456557
ETS-001-5: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-281-2953
Douille A Creneaux

142812953
C46813: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-443-8023
Flasque Darret

144438023
D12504-040-01: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-292-2114
Montage Conta Outil

142922114
OUT-MBE-6-20: RNCC: 3 | RNVC: 2
1877556014: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-422-4094
Adjustable Wrench

144224094
113.8CP: RNCC: 3 | RNVC: 2
MUP6170: RNCC: 3 | RNVC: 2
91463284: RNCC: 5 | RNVC: 2
99039034: RNCC: 5 | RNVC: 2
237-6731: RNCC: 5 | RNVC: 2
0715 221 08: RNCC: 5 | RNVC: 2
3148511325209: RNCC: 5 | RNVC: 2
1011859S00: RNCC: 5 | RNVC: 2
FACOM113.8CP: RNCC: 5 | RNVC: 9
0132520: RNCC: 5 | RNVC: 9

3 Mar 1988

5120-14-271-6125

5120-14-530-3005
A Tete P Tournevis

145303005
AEF.2X35E: RNCC: 3 | RNVC: 2
3148510048819: RNCC: 5 | RNVC: 2

29 May 2002

5120-14-284-1929

5120-14-573-1899
Face Spanner Wrench Socket

145731899
D.138: RNCC: 3 | RNVC: 2
19731: RNCC: 5 | RNVC: 2
3148510197319: RNCC: 5 | RNVC: 9

20 Sep 2012

5120-14-442-2427
Jet D'emmanchement

144422427
193-24806J: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-388-2318
Open End Wrench

143882318
VTR501-2-11194: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-410-0570
Reglage Gabarit

144100570
851-940-275-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-380-5631
Mechanical Puller Attachment

143805631
70353534: RNCC: 3 | RNVC: 2
70353534: RNCC: 5 | RNVC: 9

29 Nov 1982

5120-14-539-7357
Electrical Contact Inserter And Remover

145397357
20802M: RNCC: 3 | RNVC: 2

5 Feb 2004

5120-14-426-8277
Socket Head Screw Key

144268277
0419-40028: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-354-1455
Spanner Wrench

143541455
8810255003: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-448-5920
Open End Wrench

144485920
10-14X17: RNCC: 3 | RNVC: 2

3 Jul 1991

5120-14-396-1744
Bv Joint Mandrin

143961744
219908: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-547-3822
Electronic Component Inserter And Remover

145473822
33166: RNCC: 3 | RNVC: 2

11 Oct 2005

5120-14-458-2633
Screwdriver Handle

144582633
008234050P: RNCC: 3 | RNVC: 2

15 Oct 1992

5120-14-286-7801
Screw Thread Insert Extractor

142867801
01803050000: RNCC: 3 | RNVC: 2
35070600: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-483-6894
Open End Wrench

144836894
0U143867: RNCC: 3 | RNVC: 2
0U143867: RNCC: 5 | RNVC: 2
0U143867: RNCC: 5 | RNVC: 9
F300 0T 020 6706: RNCC: 6 | RNVC: 9

27 Sep 1996

5120-14-534-6966
Combination Box And Open End Wrench Set

145346966
39.JU10T: RNCC: 3 | RNVC: 2
3148515282379: RNCC: 5 | RNVC: 2

2 Apr 2003

5120-14-269-9190
Cle Plastique

142699190
8356177: RNCC: 3 | RNVC: 2
8356177: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-325-7277

5120-14-566-4072
Impact Type Bit Set And Handle Screwdriver

145664072
74-J16SP: RNCC: 3 | RNVC: 2

10 Nov 2010

5120-14-401-4288
Rearmen Tirette Cle

144014288
R085-003Y000A: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-388-3325
Chemise Extra Bride

143883325
SV1235: RNCC: 3 | RNVC: 2
5000261235: RNCC: 5 | RNVC: 2
SV1235: RNCC: 5 | RNVC: 9

3 Nov 1983

5120-14-276-3251
Blacksmith's Punch

142763251
M0B12-12ECCARRE: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-248-1501

5120-14-548-4220
Final Drive Assembly Alignment Pin

145484220
TDCDDMCT1233400-501: RNCC: 3 | RNVC: 2
TDCDDMCT1233400-501: RNCC: 5 | RNVC: 2

13 Jan 2006

5120-14-299-3007
Drift

142993007
28448-1: RNCC: 3 | RNVC: 2
1-28448: RNCC: 5 | RNVC: 2
28448-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-219-2173
Cle Speciale Fixati

142192173
PR46701: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-370-6412

5120-14-392-1106

5120-14-504-6930
Socket Wrench Crowfoot Attachment

145046930
453577S: RNCC: 3 | RNVC: 2
5001833421: RNCC: 3 | RNVC: 2

27 Feb 1998

5120-14-322-0659
Spanner Wrench

143220659
001568010P: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-457-7461
Seal Inserter And Remover

144577461
10274967: RNCC: 3 | RNVC: 2

17 Sep 1992

5120-14-551-0180
Vise Jaw Caps

145510180
F46824: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-241-1486
Cle A Ergots Specia

142411486
0686-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-412-7840
Cross Tip Screwdriver

144127840
APL1: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-534-2239
Socket Wrench Crowfoot Attachment

145342239
1950M-27: RNCC: 3 | RNVC: 2

17 Mar 2003

Load More Results