What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 85 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 85 of 110

5120-14-334-9604

5120-14-219-2219

5120-14-218-6717

5120-14-436-0185
Protectr Monte Join

144360185
RT30278: RNCC: 3 | RNVC: 2
161809: RNCC: 5 | RNVC: 9

29 Nov 1989

5120-14-437-4291
Bearing And Bushing Inserter And Remover

144374291
16380849: RNCC: 3 | RNVC: 2
16380849: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-510-7147
Socket Wrench Socket

145107147
STX.14: RNCC: 3 | RNVC: 2
0715 132 14: RNCC: 5 | RNVC: 2
STX14: RNCC: 5 | RNVC: 9

9 Nov 1998

5120-14-460-7044
Bearing And Bushing Inserter And Remover

144607044
45057209: RNCC: 3 | RNVC: 2
45057209: RNCC: 5 | RNVC: 9

4 Feb 1993

5120-14-202-5547
Retaining Ring Pliers

142025547
42D: RNCC: 3 | RNVC: 2
42D: RNCC: 5 | RNVC: 2
206675: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-529-4610
Hand Hose Fitting Swaging Tool Kit

145294610
DLTFRPSKT-RAF2: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-552-8456
Pliers

145528456
187.16VE: RNCC: 3 | RNVC: 2
187.16VE: RNCC: 5 | RNVC: 2
3148516418364: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-313-7251
Spanner Wrench

143137251
C47176: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-274-3580
Pliers

142743580
7231: RNCC: 3 | RNVC: 2
7231: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-440-3009
Screwdriver Bit

144403009
EX.240: RNCC: 3 | RNVC: 2
91624727: RNCC: 5 | RNVC: 2
3148510258362: RNCC: 5 | RNVC: 2
EX240: RNCC: 5 | RNVC: 2
0025836: RNCC: 5 | RNVC: 9

11 Jul 1990

5120-14-437-5321
Spanner Wrench

144375321
0490-210001: RNCC: 3 | RNVC: 2

7 Feb 1990

5120-14-436-0269
Preformed Packing Inserter

144360269
RT30283: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-375-8028
Manual Control Lever

143758028
300GUA97148: RNCC: 3 | RNVC: 2
300GUA97148: RNCC: 5 | RNVC: 2
91371584: RNCC: 5 | RNVC: 2
300GUA97148: RNCC: 5 | RNVC: 9
300GUA97148: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-446-7999
Barre De Suspension

144467999
CH93-2-1: RNCC: 3 | RNVC: 2

16 Apr 1991

5120-14-368-3209
Spanner Wrench

143683209
004124050P: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-540-6970
Flat Tip Screwdriver

145406970
38051902: RNCC: 3 | RNVC: 2
ND069652: RNCC: 5 | RNVC: 2
4848ZG8613180675: RNCC: 6 | RNVC: 9

20 Apr 2004

5120-14-423-2337
Vernier

144232337
SP2085D-9: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-349-6669
Pliers

143496669
E73-150-280: RNCC: 2 | RNVC: 2
239-3: RNCC: 3 | RNVC: 2
437-290: RNCC: 5 | RNVC: 9

22 May 1978

5120-14-528-0642
Socket Wrench Socket

145280642
888-512-100-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-241-1522
Cle A Ergots Specia

142411522
0784-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-465-0708
Outil De Matage

144650708
365A93-3215-00: RNCC: 3 | RNVC: 2
85-695-0671: RNCC: 6 | RNVC: 9

8 Sep 1993

5120-14-562-2240
Combination Open End And Spanner Wrench

145622240
CLU01-06: RNCC: 3 | RNVC: 2

8 Oct 2009

5120-14-283-9727
Broche Equipee

142839727
MS686: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-215-1898
Montage De Collage

142151898
7196: RNCC: 3 | RNVC: 2

1 Jan 1965

144914434
J16175: RNCC: 3 | RNVC: 9
F300 0T 002 9762: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-546-0131
Combination Box And Open End Wrench

145460131
40.1'1/8LA: RNCC: 3 | RNVC: 2
3148516620477: RNCC: 5 | RNVC: 2

6 Jun 2005

5120-14-220-7502
Sheet Metalworking Stake

142207502
267: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-287-8449
Spanner Wrench

142878449
0UT42: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-291-1045
Pliers

142911045
7224: RNCC: 3 | RNVC: 2
7224: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-488-9506
Socket Head Screw Key

144889506
24378: RNCC: 3 | RNVC: 2

13 Jun 1997

5120-14-552-6668
Socket Wrench Socket

145526668
SJ.20H: RNCC: 3 | RNVC: 2
SJ.20H: RNCC: 5 | RNVC: 2
3148510589855: RNCC: 5 | RNVC: 2

23 Jan 2007

5120-14-294-8629
Screwdriver Bit

142948629
RS8: RNCC: 3 | RNVC: 2
3148515138805: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-406-8051
Screw Thread Insert Inserter

144068051
01500236400: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-426-8446
Socket Head Screw Key

144268446
0411-60200: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-431-7808
Socket Head Screw Key

144317808
0411-60188: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-545-3261
Fixed Open End Wrench Set

145453261
35-TR14: RNCC: 3 | RNVC: 2

5 Apr 2005

5120-14-461-8142
Plug Electrical Connector Extractor

144618142
MP6816-24: RNCC: 3 | RNVC: 2
A1247126: RNCC: 5 | RNVC: 2

29 Mar 1993

5120-14-212-9088
Emmanche-Joint Tori

142129088
9970-115-178: RNCC: 3 | RNVC: 2
9970-115-178-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-228-5930
Bearing And Bushing Inserter

142285930
NO PRIMARY REF14-228-5930: RNCC: 3 | RNVC: 2
RT884: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-201-5207
Arrache Pignon

142015207
NO PRIMARY REF14-201-5207: RNCC: 3 | RNVC: 2
2678: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-274-0287
A Douille Cle

5120-14-395-1880

5120-14-564-5175
Screwdriver Bit Set And Handle

145645175
AM.1: RNCC: 3 | RNVC: 2
812594: RNCC: 5 | RNVC: 2

4 May 2010

5120-14-490-6989
Wrench

144906989
241 W 00619 820: RNCC: 3 | RNVC: 2
F300 0T 000 1170: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-479-8103
Flat Tip Screwdriver

144798103
AZ.4X100: RNCC: 3 | RNVC: 2
AZ-4X100: RNCC: 5 | RNVC: 2
1092100Y00: RNCC: 5 | RNVC: 2
91826833: RNCC: 5 | RNVC: 2
176-0769: RNCC: 5 | RNVC: 2
3148510133850: RNCC: 5 | RNVC: 2
FACOMAZ.4X100: RNCC: 5 | RNVC: 9
0013385: RNCC: 5 | RNVC: 9

7 Feb 1996

5120-14-404-3953
Hose Wire Band Clamping Tool

144043953
NO PRIMARY REF14-404-3953: RNCC: 3 | RNVC: 2
27692: RNCC: 5 | RNVC: 9

30 Oct 1985

5120-14-460-1312
Socket Head Screw Key

144601312
76145012600: RNCC: 3 | RNVC: 2
43541388: RNCC: 5 | RNVC: 2
491586-00: RNCC: 5 | RNVC: 2

13 Jan 1993

5120-14-225-3989
Cle A Oeil Speciale

142253989
9970-115-016: RNCC: 3 | RNVC: 2
171-180: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-345-5418
Flat Tip Screwdriver

143455418
NO PRIMARY REF14-345-5418: RNCC: 3 | RNVC: 2
PR46864: RNCC: 5 | RNVC: 9
85-686-9354: RNCC: 6 | RNVC: 9

5 Oct 1977

5120-14-417-8352
Cle A Cannelure Ext

144178352
523061: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-14-387-8644
Spanner Wrench

143878644
OU50413: RNCC: 3 | RNVC: 2
50413: RNCC: 3 | RNVC: 2
0U50413: RNCC: 5 | RNVC: 2
50413: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-344-3396
Spanner Wrench

143443396
C47855: RNCC: 3 | RNVC: 2
7M144U: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-524-9812
Seal Inserter And Remover

145249812
BI766305: RNCC: 3 | RNVC: 2
SYB2790: RNCC: 5 | RNVC: 2

10 May 2001

5120-14-546-4039
Socket Wrench Socket

145464039
0714 13 16: RNCC: 3 | RNVC: 2

30 Jun 2005

5120-14-380-8407
Spanner Wrench

143808407
PR47676: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-484-6536
Craftsman's Tweezers

144846536
145: RNCC: 3 | RNVC: 2
3148511376300: RNCC: 5 | RNVC: 2
0137630: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-433-6701
Open End Wrench

144336701
MOF902893: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-418-0906
Spanner Wrench

144180906
506557T: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-468-9667
Axe Rechange Pince

144689667
176.SE: RNCC: 3 | RNVC: 2
3148511406502: RNCC: 5 | RNVC: 2
0140650: RNCC: 5 | RNVC: 9

30 Mar 1994

5120-14-319-6281

5120-14-420-0010
Out Mont Interbague

144200010
36545800400: RNCC: 3 | RNVC: 2
314386: RNCC: 5 | RNVC: 9
365458004: RNCC: 5 | RNVC: 9
36545800400: RNCC: 5 | RNVC: 9

16 Nov 1987

5120-14-303-6282

5120-14-216-1779
Spanner Wrench

142161779
2142441-1: RNCC: 3 | RNVC: 2
B2142441-1: RNCC: 3 | RNVC: 2
GC1339: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-541-1679
Hand Terminal Crimping Tool

145411679
790081-2: RNCC: 3 | RNVC: 2

14 May 2004

5120-14-508-3337
Socket Wrench Socket

145083337
R.5,5E: RNCC: 3 | RNVC: 2
1076981E00: RNCC: 5 | RNVC: 2

4 Sep 1998

5120-14-210-9867
Socket Wrench Handle

142109867
J.120: RNCC: 3 | RNVC: 2
J120: RNCC: 5 | RNVC: 2
W269311000113: RNCC: 5 | RNVC: 2
3148510285702: RNCC: 5 | RNVC: 2
0713 120 201: RNCC: 5 | RNVC: 2
0028570: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-428-8925
Bearing And Bushing Inserter

144288925
6851K33-2121-00: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-386-1533
Bearing And Bushing Inserter

143861533
6801E32-9824-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-421-3309
Matoir

144213309
530683: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-392-5671

5120-14-575-4654
Inserted Hammer Face

145754654
212.E15: RNCC: 3 | RNVC: 2

9 Apr 2013

5120-14-241-6042
Bloc De Presertissa

142416042
RPS6K: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-548-9311
Spanner Wrench

145489311
46423391AA: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-445-9164
Bearing Staking Installation Tool

144459164
326562: RNCC: 3 | RNVC: 2

27 Feb 1991

5120-14-459-5929
Bag Montage Mandrin

144595929
479351J: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-553-6344
Six Point Tip Screwdriver

145536344
AZX.40X150: RNCC: 3 | RNVC: 2
MO099437: RNCC: 6 | RNVC: 9

26 Apr 2007

5120-14-551-1794
Socket Wrench Socket

145511794
NS.19A: RNCC: 3 | RNVC: 2
3148516547330: RNCC: 3 | RNVC: 2

1 Sep 2006

5120-14-414-5679
Hand-Operated Grommet And Eyelet Press

144145679
2600500: RNCC: 3 | RNVC: 9

11 Feb 1987

5120-14-375-8037
Spanner Wrench

143758037
300A92809: RNCC: 3 | RNVC: 2
300A92809: RNCC: 5 | RNVC: 2
91371612: RNCC: 5 | RNVC: 2
300A92809: RNCC: 5 | RNVC: 9
300A92809: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-367-6227
Spanner Wrench

143676227
110PAA: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-300-7324

5120-14-426-6719
Retaining Ring Pliers

144266719
NO PRIMARY REF14-426-6719: RNCC: 3 | RNVC: 2
0178200: RNCC: 5 | RNVC: 2
475-15: RNCC: 5 | RNVC: 2
475.15: RNCC: 5 | RNVC: 2
0242591Y00: RNCC: 5 | RNVC: 2
91626661: RNCC: 5 | RNVC: 2

15 Sep 1988

5120-14-353-2426
Spanner Wrench

143532426
65-30-144-30-04-03: RNCC: 3 | RNVC: 2
65-30-144-13-01: RNCC: 5 | RNVC: 2

8 Dec 1978

5120-14-427-2494
Spanner Wrench

144272494
488402M354-06P11: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-488-9251
Spanner Wrench

144889251
4311MT005-011: RNCC: 3 | RNVC: 2

11 Jun 1997

5120-14-409-4679
Socket Wrench Spanner Attachment

144094679
4843-2P: RNCC: 3 | RNVC: 9

28 May 1986

5120-14-420-0265
Socket Wrench Screwdriver Attachment

144200265
NO PRIMARY REF14-420-0265: RNCC: 3 | RNVC: 2
0059170: RNCC: 5 | RNVC: 2
ST.10L: RNCC: 5 | RNVC: 2
ST10L: RNCC: 5 | RNVC: 2
1068343P00: RNCC: 5 | RNVC: 2

18 Nov 1987

5120-14-300-9647
Bearing And Bushing Inserter

143009647
341A93-3504-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-291-8143
Open End Wrench

142918143
70-38X42: RNCC: 3 | RNVC: 2
3272670273009: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-426-5625
Socket Wrench Spanner Attachment

144265625
429-65053-000: RNCC: 3 | RNVC: 2

8 Sep 1988

5120-14-271-8602
Open End Wrench

142718602
NO PRIMARY REF14-271-8602: RNCC: 3 | RNVC: 2
280446: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-317-7969
Spanner Wrench

143177969
NO PRIMARY REF14-317-7969: RNCC: 3 | RNVC: 2
842880-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-400-3804
Socket Wrench Socket

144003804
J11-32: RNCC: 3 | RNVC: 2
85-457-8540: RNCC: 6 | RNVC: 9

24 Apr 1985

5120-14-551-1349
Socket Wrench Spanner Attachment

145511349
8400-40: RNCC: 3 | RNVC: 2
AA006707: RNCC: 6 | RNVC: 9

28 Aug 2006

5120-14-259-2640
Spanner Wrench

142592640
0U12827: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-210-9923
Slip Joint Pliers

142109923
180: RNCC: 3 | RNVC: 2
91638759: RNCC: 5 | RNVC: 2
91778020: RNCC: 5 | RNVC: 2
180CB: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-456-8205
Bearing And Bushing Inserter And Remover

144568205
45057767: RNCC: 3 | RNVC: 2
45057767: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-454-9396
Cross Tip Screwdriver

144549396
APE.00: RNCC: 3 | RNVC: 2

29 Apr 1992

5120-14-381-0077

5120-14-215-3049
Cle A Ergots

5120-14-249-9470
Open End Wrench

142499470
E74302S22X24AKB: RNCC: 2 | RNVC: 2
10NC22X24: RNCC: 3 | RNVC: 2
13L22X24: RNCC: 3 | RNVC: 2
44S22X24: RNCC: 5 | RNVC: 2
130341: RNCC: 5 | RNVC: 2
980-01-11: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-321-8082
Spanner Wrench

143218082
3160S95-42-002: RNCC: 3 | RNVC: 2
85-100-3169: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-324-4917
Mise En Forme Cone

143244917
S16-0605-0900: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-294-0702
Blacksmith's Vise

142940702
NO PRIMARY REF14-294-0702: RNCC: 3 | RNVC: 2
18-150: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-498-9444
Socket Head Screw Key

144989444
TC1-179: RNCC: 3 | RNVC: 2
5010054218: RNCC: 5 | RNVC: 2
F300 0T 013 3161: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-536-4325
Bearing And Bushing Inserter And Remover

145364325
132552: RNCC: 3 | RNVC: 2

5 Aug 2003

5120-14-458-6880
Spanner Wrench

144586880
M34162+M34163: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-041-8335
Seal Inserter And Remover

140418335
80864: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-483-7923
Spanner Wrench

144837923
739690: RNCC: 3 | RNVC: 2

3 Oct 1996

5120-14-486-5607
Socket Wrench Socket

144865607
RT13637: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-336-3365
Ecrou Montage Bague

143363365
RK5939REPL: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-291-8591
Lampe Detectrice De

142918591
24-0061: RNCC: 3 | RNVC: 2
DL240061: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-508-3319
Spring Inserter And Remover

145083319
416.C: RNCC: 3 | RNVC: 2
0175502: RNCC: 5 | RNVC: 2
1091919L00: RNCC: 5 | RNVC: 2

4 Sep 1998

5120-14-530-2091
Socket Head Screw Key

145302091
83SH.3/8: RNCC: 3 | RNVC: 2
3148511238813: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-394-3348
Mechanical Puller Adapter

143943348
20196325-6: RNCC: 3 | RNVC: 2
20196325-6: RNCC: 5 | RNVC: 9

28 Aug 1984

5120-14-325-4233
Screwdriver Handle

143254233
AALB-M: RNCC: 3 | RNVC: 2
AALAM: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-331-5620
Tap And Reamer Wrench

143315620
380-2: RNCC: 3 | RNVC: 2
3272670300088: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-539-8021
Combination Box And Open End Wrench

145398021
37.9: RNCC: 3 | RNVC: 2

11 Feb 2004

5120-14-296-0185
Sheet Metalworking Dolly Block

142960185
292 B: RNCC: 3 | RNVC: 2
2859: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-303-3896
Screwdriver And Socket Wrench Combination

143033896
0513810: RNCC: 3 | RNVC: 2
RS.6: RNCC: 5 | RNVC: 2
RS6: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-552-6175
Spanner Wrench

145526175
GENE E 290005A: RNCC: 3 | RNVC: 2

18 Jan 2007

5120-14-537-5223
Hose Strap Band Clamping Tool

145375223
OCE91: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-427-2052
Extracteur Etrier

144272052
46AM014-00-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-251-2537

5120-14-310-7612
Open End Wrench

143107612
116-995-044: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-478-5827
Depose Cle

144785827
0S22346: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-456-8024
Embouts Guide Culas

144568024
8-0115BZ: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-566-8289
Hand Intrenching Tool

145668289
050511 9: RNCC: 3 | RNVC: 2

23 Dec 2010

5120-14-247-3716
Douille A Creneaux

142473716
PR46699: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-358-7206
Obus De Centrage

143587206
SMS267: RNCC: 3 | RNVC: 2
SMS267: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-434-8085
Bearing And Bushing Inserter And Remover

144348085
MI39246: RNCC: 3 | RNVC: 2
96157501: RNCC: 5 | RNVC: 2

4 Oct 1989

5120-14-285-4474
Socket Head Screw Key

142854474
M112-2-431: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-238-5788
Open End Wrench

142385788
NO PRIMARY REF14-238-5788: RNCC: 3 | RNVC: 2
48-6: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-233-4353
Extracteur De Silen

142334353
431: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-552-1987
Six Point Tip Screwdriver

145521987
ACZXR.25X100: RNCC: 3 | RNVC: 2
ACZXR.25X100: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-14-509-2760
Stakeholder Bench Plate

145092760
CKS.13B: RNCC: 3 | RNVC: 2

21 Oct 1998

5120-14-304-6362
Hand Terminal Crimping Tool

143046362
8463: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-484-0385
Retaining Ring Installation Tool

144840385
OU138731: RNCC: 3 | RNVC: 2
OU138731: RNCC: 5 | RNVC: 2
OU138731: RNCC: 5 | RNVC: 9
F300 0T 020 6731: RNCC: 6 | RNVC: 9

17 Oct 1996

5120-14-237-9804
Open End Wrench

142379804
DI2601: RNCC: 3 | RNVC: 2
0000330569: RNCC: 5 | RNVC: 2
0000330569: RNCC: 5 | RNVC: 9
330569: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-518-8116
Detent Handling Tool

145188116
7511 105 52861: RNCC: 3 | RNVC: 2

21 Feb 2000

5120-14-534-6831
Pliers

145346831
MS53B: RNCC: 3 | RNVC: 2
ASC1590753: RNCC: 5 | RNVC: 9

2 Apr 2003

5120-14-542-6103
Open End Wrench

145426103
8054913T00: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-514-3431
Spanner Wrench

145143431
464204: RNCC: 3 | RNVC: 2

12 May 1999

5120-14-536-0548
Face Spanner Wrench Socket

145360548
SP.13947: RNCC: 3 | RNVC: 2

9 Jul 2003

5120-14-525-0982
Socket Head Screw Key Set

145250982
089151050: RNCC: 3 | RNVC: 2
089151050: RNCC: 5 | RNVC: 9

18 May 2001

5120-14-365-3793
Hand Blind Riveter

143653793
RT22562: RNCC: 3 | RNVC: 2

19 Sep 1980

5120-14-532-3260
Screwdriver Bit

145323260
ED.601T: RNCC: 3 | RNVC: 2
3148510227221: RNCC: 5 | RNVC: 2

30 Oct 2002

5120-14-504-6732
Adjustable Wrench

145046732
RBSK0187: RNCC: 3 | RNVC: 2
RBSK 187: RNCC: 5 | RNVC: 2

25 Feb 1998

5120-14-489-3927
D'essai Outillage

144893927
OS22640: RNCC: 3 | RNVC: 2
0S22640: RNCC: 5 | RNVC: 2
OS22640: RNCC: 5 | RNVC: 2

16 Jul 1997

5120-14-221-8796

5120-14-299-4261

5120-14-483-9263
Socket Wrench Socket

144839263
0446548N00: RNCC: 3 | RNVC: 2

10 Oct 1996

5120-14-383-0898
Mont Ent Fourchette

143830898
9970-121-210: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-330-1259
Electrical Contact Remover

143301259
M15514-12: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-324-4714
Face Spanner Wrench Socket

143244714
330A93-2007-20: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-446-7402
Open End Wrench

144467402
60920050: RNCC: 3 | RNVC: 2
89280565: RNCC: 5 | RNVC: 2

9 Apr 1991

5120-14-524-9813
Seal Inserter And Remover

145249813
BI918945: RNCC: 3 | RNVC: 2
SYB2791: RNCC: 5 | RNVC: 2

10 May 2001

5120-14-529-1913
Mecanique Extracteur

5120-14-529-2430

5120-14-443-9768

5120-14-338-4758
Mors Mobile

143384758
PR46487-2: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-571-2832
Seal Inserter

145712832
223605387: RNCC: 3 | RNVC: 2

8 Mar 2012

5120-14-424-7058
De Mise En Pl Outil

144247058
0227190: RNCC: 3 | RNVC: 2
1805-24: RNCC: 5 | RNVC: 2
1805.24: RNCC: 5 | RNVC: 2

7 Jun 1988

5120-14-557-4361
Hydraulic Jack Handle

145574361
BV-D17A: RNCC: 3 | RNVC: 9
438233: RNCC: 5 | RNVC: 2

10 Jun 2008

5120-14-419-2588
Appareil A Sertir

144192588
530594: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-446-9387
Spanner Wrench

144469387
2-45727: RNCC: 3 | RNVC: 2

17 Apr 1991

5120-14-435-0487
Screwdriver Bit

144350487
0000890: RNCC: 3 | RNVC: 2
A-200-TA2,5: RNCC: 5 | RNVC: 2

17 Oct 1989

5120-14-512-2006
Socket Head Screw Key

145122006
89TX.6: RNCC: 3 | RNVC: 2

8 Feb 1999

5120-14-296-2552
Pousse-Roulement

142962552
0-51706-7-2: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-489-4885
Socket Wrench Socket

144894885
J.16LA: RNCC: 3 | RNVC: 2
3148510280813: RNCC: 5 | RNVC: 2
J16LA: RNCC: 5 | RNVC: 2
8031882Q00: RNCC: 5 | RNVC: 2
0028081: RNCC: 5 | RNVC: 9
AC97011: RNCC: 5 | RNVC: 9
F300 0T 023 6324: RNCC: 6 | RNVC: 9

23 Jul 1997

5120-14-445-9865
Socket Wrench Screwdriver Attachment

144459865
SV.8: RNCC: 3 | RNVC: 2
3148515190803: RNCC: 5 | RNVC: 2

4 Mar 1991

5120-14-369-6671
Sleeve Stretching Pliers

143696671
15013: RNCC: 3 | RNVC: 2
D: RNCC: 5 | RNVC: 2

17 Apr 1981

5120-14-396-4125
Spanner Wrench

143964125
6274-51016: RNCC: 3 | RNVC: 2
6274-2502820: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-415-8176
Socket Wrench Handle Bar

144158176
NO PRIMARY REF14-415-8176: RNCC: 3 | RNVC: 2
GMN307707P3: RNCC: 5 | RNVC: 9

21 May 1987

5120-14-210-4738
Plug Electrical Connector Extractor

142104738
8140-35: RNCC: 3 | RNVC: 2
5L4561-006-05: RNCC: 5 | RNVC: 2
8140-35: RNCC: 5 | RNVC: 2
91263038: RNCC: 5 | RNVC: 2
5L 4561.006-05: RNCC: 5 | RNVC: 2
91263038: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-318-6237
Spanner Wrench

143186237
PR47583: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-447-3037
Open End Wrench

144473037
C04050724: RNCC: 3 | RNVC: 2
C04050724: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-271-9700
Arrache Boitier

142719700
063694: RNCC: 3 | RNVC: 2
0-63694: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-338-9012
Cle De Preblocage

143389012
8811793000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-416-7587
Mandrin Presse

144167587
537435: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-297-9864
Socket Wrench Socket Set

142979864
S.404E: RNCC: 3 | RNVC: 2
3148515154003: RNCC: 5 | RNVC: 2
0515400: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-440-3010
Screwdriver Bit

144403010
EX.250: RNCC: 3 | RNVC: 2
EX.250: RNCC: 5 | RNVC: 2
EX250: RNCC: 5 | RNVC: 2
3148510258409: RNCC: 5 | RNVC: 2
1068066A00: RNCC: 5 | RNVC: 2
0614 315 0: RNCC: 5 | RNVC: 2
91624729: RNCC: 5 | RNVC: 2
0025840: RNCC: 5 | RNVC: 9
MO098770: RNCC: 6 | RNVC: 9

11 Jul 1990

5120-14-476-5098
Hose Strap Band Clamping Tool

144765098
54.0.000.202: RNCC: 3 | RNVC: 2
540-000-202: RNCC: 5 | RNVC: 2
Z00.N7675230202: RNCC: 5 | RNVC: 2
202: RNCC: 5 | RNVC: 2
00-0-001-202: RNCC: 5 | RNVC: 9

14 Jun 1995

5120-14-346-8751
Electrical Card Extractor

143468751
5702-1-212: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-422-0114
Socket Wrench Screwdriver Attachment

144220114
0025204: RNCC: 3 | RNVC: 2
ET604: RNCC: 5 | RNVC: 2
ET.604: RNCC: 5 | RNVC: 2

16 Feb 1988

5120-14-475-4630
Socket Head Screw Key

144754630
994062: RNCC: 3 | RNVC: 2

10 Apr 1995

5120-14-539-8046
Socket Wrench Screwdriver Attachment

145398046
8045740A00: RNCC: 3 | RNVC: 2

11 Feb 2004

5120-14-408-6964
Open End Wrench

144086964
100-160: RNCC: 3 | RNVC: 2

2 Apr 1986

5120-14-381-1031
Spanner Wrench

143811031
459952: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-361-8473
Socket Wrench Socket

143618473
8812945000: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-291-8150
Socket Wrench Socket

142918150
K27L: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-409-3579
Wrench Extension Handle

144093579
72548: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-521-6352
Torque Wrench Adapter

145216352
SP3111: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-241-9459

5120-14-224-8244
Cle De Tension Des

142248244
HSS831AHB149: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-486-5670
Montage

144865670
RT21771: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-497-3370
Cle

144973370
0478-200000: RNCC: 3 | RNVC: 2
F300 0T 023 0234: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-577-4021
Locking Device Removal Tool

145774021
65301-FE317100: RNCC: 3 | RNVC: 2

12 Sep 2013

5120-14-370-6125
Verin Prolongateur

143706125
5110-007: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-385-3139
Spanner Wrench

143853139
360A93-3304-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-514-1352
Embout Pince A Rive

145141352
7165-07-02: RNCC: 3 | RNVC: 2
7165-07-02: RNCC: 5 | RNVC: 2

28 Apr 1999

5120-14-437-1667
Collage Outillage

144371667
27377940-0: RNCC: 3 | RNVC: 2
SG-AX141: RNCC: 5 | RNVC: 2

17 Jan 1990

5120-14-378-5579
Montage Frein Jet

143785579
6803P32-6003-00: RNCC: 3 | RNVC: 2
6803365A32-6003-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-560-1088

5120-14-576-1209
Ratchet Wrench

145761209
467S.7: RNCC: 3 | RNVC: 2
3148518200257: RNCC: 5 | RNVC: 2
820025: RNCC: 5 | RNVC: 2

30 May 2013

5120-14-325-6114
Cle A Double Renvoi

143256114
468703: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-462-9816
Aerateur Cle

144629816
T700A2199000000: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-443-9706

5120-14-575-3278
Hand Hammer

145753278
10688108000: RNCC: 3 | RNVC: 1

27 Mar 2013

5120-14-528-0541
Tournevis Automatiq

145280541
AAM.PE: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-441-1762
Spanner Wrench Handle

144411762
MEH162-2-1: RNCC: 3 | RNVC: 2
89280385: RNCC: 5 | RNVC: 2

22 Aug 1990

5120-14-343-8346

5120-14-576-0458
Socket Wrench Ratchet Attachment

145760458
05107045: RNCC: 3 | RNVC: 2

27 May 2013

5120-14-383-0605
Emmanchement Chemis

143830605
F47197: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-425-5995
Socket Wrench Socket

144255995
NS.3/4: RNCC: 3 | RNVC: 2
3148510425207: RNCC: 5 | RNVC: 2
0042520: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-548-6484
Slip Joint Pliers

145486484
180.VSE: RNCC: 3 | RNVC: 2
180.VSE: RNCC: 5 | RNVC: 2
230/783/0: RNCC: 5 | RNVC: 2

30 Jan 2006

5120-14-478-3312
Screwdriver Bit

144783312
EH.102,5: RNCC: 3 | RNVC: 2
EH.102,5: RNCC: 5 | RNVC: 2
3148510233680: RNCC: 5 | RNVC: 2
0237076R00: RNCC: 5 | RNVC: 2
91774061: RNCC: 5 | RNVC: 2
0023368: RNCC: 5 | RNVC: 9

25 Oct 1995

5120-14-214-3284
Socket Wrench Socket

142143284
J.11: RNCC: 3 | RNVC: 2
3148510271507: RNCC: 5 | RNVC: 2
J11: RNCC: 5 | RNVC: 2
91493215: RNCC: 5 | RNVC: 2
0027150: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-352-3165
Montage Joint Obus

143523165
MGE312-21: RNCC: 3 | RNVC: 2
MGE312-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-517-3535
Cle Ecrou Encoches

145173535
25145902650: RNCC: 3 | RNVC: 2
262383-00: RNCC: 5 | RNVC: 2

6 Dec 1999

5120-14-307-8818
Bearing And Bushing Inserter And Remover

143078818
330A98-3342-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-564-6792
Open End Wrench

145646792
TR1-530: RNCC: 3 | RNVC: 2

25 May 2010

5120-14-418-5146
Outil D'installatio

144185146
3511 191 50331: RNCC: 3 | RNVC: 2
3511-191-50331: RNCC: 5 | RNVC: 2
3511 191 50331: RNCC: 5 | RNVC: 2

26 Aug 1987

5120-14-513-4234
Socket Head Screw Key

145134234
NO PRIMARY REF14-513-4234: RNCC: 3 | RNVC: 2
NNP 5120860580338: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-355-5501
Spanner Wrench

143555501
MHJ288-48: RNCC: 3 | RNVC: 2
MHS288-21: RNCC: 5 | RNVC: 2
MHJ288-48: RNCC: 5 | RNVC: 2

19 Mar 1979

5120-14-368-5054
Positionneur Goupil

143685054
233100-78: RNCC: 3 | RNVC: 2
TF10A32404: RNCC: 5 | RNVC: 2
85-689-7910: RNCC: 6 | RNVC: 9

20 Feb 1981

5120-14-479-6677
Tire Cable

144796677
TPU17INOX: RNCC: 3 | RNVC: 2

31 Jan 1996

5120-14-262-5564
Outillage De Rodage

142625564
R0D17119: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-484-6528
Socket Head Screw Key

144846528
83SH.2,5: RNCC: 3 | RNVC: 2
3148511238073: RNCC: 5 | RNVC: 2
91777972: RNCC: 5 | RNVC: 2
235-2735: RNCC: 5 | RNVC: 2
0715 311 48: RNCC: 5 | RNVC: 2
0123807: RNCC: 5 | RNVC: 9
FACOM83SH.2,5: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-542-9410
Mechanical Puller Attachment

145429410
8370008: RNCC: 3 | RNVC: 2
8370008: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-220-7893
Open End Wrench

142207893
RACD54: RNCC: 3 | RNVC: 2
RACD54: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-426-8408
Spanner Wrench

144268408
0415-19: RNCC: 3 | RNVC: 2
0415-19: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-393-0395
Hand Tube Flaring Tool

143930395
500FA: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-405-2255
Electrical Card Extractor

144052255
1900230000: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-308-3305

5120-14-234-4274

5120-14-562-7164
Spanner Wrench

145627164
712012-01: RNCC: 3 | RNVC: 2

17 Nov 2009

5120-14-371-5704
Entre Fixe Fourchet

143715704
9970-121-197: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-524-9213
Socket Head Screw Key

145249213
21423370-00: RNCC: 3 | RNVC: 2
21423370-8: RNCC: 5 | RNVC: 2

3 May 2001

5120-14-435-2081
Rearmement Outil

144352081
2340-03268: RNCC: 3 | RNVC: 2

27 Oct 1989

5120-14-544-9442
Screwdriver Bit

145449442
EH.205L: RNCC: 3 | RNVC: 2
8056322Y00: RNCC: 5 | RNVC: 2

7 Mar 2005

5120-14-234-3654
Socket Wrench Screwdriver Attachment

142343654
M02019: RNCC: 3 | RNVC: 2
0000330518: RNCC: 5 | RNVC: 2
0000330518: RNCC: 5 | RNVC: 9
330518: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-467-6209
Socket Head Screw Key

144676209
401935: RNCC: 3 | RNVC: 2
401935: RNCC: 5 | RNVC: 9

19 Jan 1994

5120-14-264-9580
Spanner Wrench

142649580
0292-78: RNCC: 3 | RNVC: 2
RA292: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-537-1291
Open End Wrench

145371291
SP.7276: RNCC: 3 | RNVC: 2

1 Oct 2003

5120-14-428-5278
Remote Control Lever

144285278
MJK4092110: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-432-3802
Spanner Wrench

144323802
540670: RNCC: 3 | RNVC: 2
00540670: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-557-5361
Cable Type Ratchet Lever Puller

145575361
YALETRAC Y08: RNCC: 3 | RNVC: 2

19 Jun 2008

5120-14-404-8663
Electrical Contact Remover

144048663
23550: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-384-4240
Face Spanner Wrench Socket

143844240
C5078A: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-469-9060
Open End Wrench

144699060
46.22VSE: RNCC: 3 | RNVC: 2
3148511057209: RNCC: 5 | RNVC: 2
0105720: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-473-7249
Embout Serrage Banj

144737249
172094-178PYSN: RNCC: 3 | RNVC: 2

10 Jan 1995

5120-14-427-0966
Outillage Mandrin

144270966
540503: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-320-0113
Mandrin Cannele

143200113
3CGF86D: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-463-7678
Manchon

144637678
428399F: RNCC: 3 | RNVC: 2
M18254: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-383-0889
Bouch Magne Etalons

143830889
9970-121-175: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-574-2584
Drill Guide

145742584
33-100-10-4,1-10: RNCC: 3 | RNVC: 2
08171000410: RNCC: 3 | RNVC: 9
438126: RNCC: 5 | RNVC: 2

19 Dec 2012

5120-14-438-0450
Retaining Ring Pliers

144380450
NO PRIMARY REF14-438-0450: RNCC: 3 | RNVC: 2
0178660: RNCC: 5 | RNVC: 2
479.S: RNCC: 5 | RNVC: 2
479S: RNCC: 5 | RNVC: 2
91545216: RNCC: 5 | RNVC: 2

7 Mar 1990

5120-14-406-5610
Equilibrage Flasque

144065610
853-200-634-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-514-0210
Open End Wrench

145140210
ENFD29159-36X41: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-249-9400
Socket Wrench Ratchet Attachment

142499400
J.156: RNCC: 3 | RNVC: 2
101259: RNCC: 5 | RNVC: 2
C66540: RNCC: 5 | RNVC: 2
3148510286709: RNCC: 5 | RNVC: 2
J-156: RNCC: 5 | RNVC: 2
J156: RNCC: 5 | RNVC: 2
0028670: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-465-4668
Face Spanner Wrench Socket

144654668
851-500-103-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-222-6204
Socket Wrench Socket

142226204
J5/8L: RNCC: 3 | RNVC: 2
JL5-8: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-486-2838
Butee A Bil Manchon

144862838
F117128: RNCC: 3 | RNVC: 2

10 Mar 1997

5120-14-566-9233
Wrench Kit

145669233
K.411: RNCC: 3 | RNVC: 2
3148516924902: RNCC: 5 | RNVC: 2
692490: RNCC: 5 | RNVC: 2

17 Jan 2011

5120-14-556-5379
Screw Extractor

145565379
7M910 A: RNCC: 3 | RNVC: 2

19 Mar 2008

5120-14-401-9300
Grip-Fil

144019300
451MJ001-9: RNCC: 3 | RNVC: 9

18 Jun 1985

5120-14-255-5790

5120-14-289-5674
Spanner Wrench

142895674
3599002: RNCC: 3 | RNVC: 2
3599002: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-578-5194
Seal Inserter

145785194
OU300276: RNCC: 3 | RNVC: 2

9 Dec 2013

5120-14-216-4107

5120-14-224-8043

5120-14-201-2937

5120-14-389-3440
Etau Support

143893440
MFG254-21: RNCC: 3 | RNVC: 2
MFG254-21: RNCC: 5 | RNVC: 2

29 Nov 1983

5120-14-222-6169
Socket Wrench Socket

142226169
J3-8: RNCC: 3 | RNVC: 2
J.3/8: RNCC: 3 | RNVC: 2
J-3/8: RNCC: 3 | RNVC: 2
3148510277004: RNCC: 5 | RNVC: 2
J3-8: RNCC: 5 | RNVC: 2
3272670267145: RNCC: 5 | RNVC: 2
0027700: RNCC: 5 | RNVC: 9
74J3-8: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-224-8029
Open End Wrench

142248029
13-1-1-8X1-3-8: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-276-3195
Socket Wrench Socket

142763195
S1: RNCC: 3 | RNVC: 2
S-1': RNCC: 3 | RNVC: 2
S1: RNCC: 3 | RNVC: 2
65L1: RNCC: 3 | RNVC: 2
S1: RNCC: 3 | RNVC: 9
3148510545806: RNCC: 5 | RNVC: 2
3272670237704: RNCC: 5 | RNVC: 2
SYQ5203: RNCC: 5 | RNVC: 2
DEMS1: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-503-5954
Flat Tip Screwdriver

145035954
AY.2,5X50VE: RNCC: 3 | RNVC: 2
618000: RNCC: 3 | RNVC: 2
0012850: RNCC: 5 | RNVC: 2
3148510130422: RNCC: 5 | RNVC: 2
3148510128504: RNCC: 5 | RNVC: 9
AY.2,5X50VSE: RNCC: 5 | RNVC: 9

21 Jan 1998

5120-14-276-3190
Socket Wrench Socket

142763190
S3-4: RNCC: 3 | RNVC: 2
S-3/4: RNCC: 3 | RNVC: 2
S3-4: RNCC: 3 | RNVC: 2
65L3-4: RNCC: 3 | RNVC: 2
S3-4: RNCC: 3 | RNVC: 9
3272670207790: RNCC: 5 | RNVC: 2
75S3-4: RNCC: 5 | RNVC: 9
82500307: RNCC: 5 | RNVC: 9
82500307: RNCC: 5 | RNVC: 9
DEMS3-4: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-490-6955
Handle

144906955
241 H 01508 000: RNCC: 3 | RNVC: 2
F300 0T 000 1092: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-472-3519
Socket Head Screw Key

144723519
82H.6: RNCC: 3 | RNVC: 2
3148511230619: RNCC: 5 | RNVC: 2
0110678D00: RNCC: 5 | RNVC: 2
91778003: RNCC: 5 | RNVC: 2
235-2943: RNCC: 5 | RNVC: 2
0715 31 41: RNCC: 5 | RNVC: 2
0123061: RNCC: 5 | RNVC: 9
FACOM82H.6: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-561-2653
Socket Wrench Adapter

145612653
E-112-H3: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-389-2090
Pince A Souder Pneu

143892090
7460: RNCC: 3 | RNVC: 2
P460A000001S: RNCC: 5 | RNVC: 2

29 Nov 1983

5120-14-222-7148
Open End Wrench

142227148
33-14X15: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-276-9472
Electronic Crystal Unit Extractor

142769472
B16-136-886: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-546-6351
Entr Fouet A Chaine

145466351
RL-00900: RNCC: 3 | RNVC: 2

21 Jul 2005

5120-14-415-1070
Montage Epreuve Hyd

144151070
24545934000: RNCC: 3 | RNVC: 2
245459340: RNCC: 5 | RNVC: 9
145J340: RNCC: 5 | RNVC: 9

1 Apr 1987

5120-14-428-5235
Support Bloc

144285235
MFG4412101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-493-3668
Cle

144933668
NO PRIMARY REF14-493-3668: RNCC: 3 | RNVC: 2
24C138: RNCC: 5 | RNVC: 9
F300 0T 012 7439: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-401-2574
Spanner Wrench

144012574
211073: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-352-5140
Ecrou Palie Adaptat

143525140
8811747000: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-439-7992
Open End Wrench

144397992
10-36X38CP: RNCC: 3 | RNVC: 2
91467276: RNCC: 5 | RNVC: 2

23 May 1990

5120-14-384-1139
Extra Paradrogu Cle

143841139
160-882091: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-503-4768
Electronic Component Inserter And Remover

145034768
45240235: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-447-3438
Bearing And Bushing Inserter And Remover

144473438
60917298: RNCC: 3 | RNVC: 2
89280535: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-463-5618
Bearing And Bushing Remover

144635618
45057948: RNCC: 3 | RNVC: 2
45057948: RNCC: 5 | RNVC: 9

17 Jun 1993

5120-14-431-8476
Spanner Wrench

144318476
46AM106: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-236-8815
Spanner Wrench

142368815
0UT34: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-567-0457
Socket Wrench Socket

145670457
M.75HA: RNCC: 3 | RNVC: 2
0663445: RNCC: 5 | RNVC: 2
663445: RNCC: 5 | RNVC: 2

2 Feb 2011

5120-14-274-8552
Flat Tip Screwdriver

142748552
E74-351-2BR0NZEBERYLLIUM: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-378-5564
Mont Ens Tachym Tas

143785564
6801P32-1067-00: RNCC: 3 | RNVC: 2
6801365A32-1067-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-416-8002
Spanner Wrench

144168002
E74323-190-215AXTT: RNCC: 2 | RNVC: 2

25 Jun 1987

5120-14-353-9389
Axe Pr Cle Speciale

143539389
14-0279-41: RNCC: 3 | RNVC: 9

16 Jan 1979

5120-14-433-5476
Spanner Wrench

144335476
0857062N00: RNCC: 3 | RNVC: 2
3605112: RNCC: 3 | RNVC: 2
0860037C00: RNCC: 5 | RNVC: 2
3605112: RNCC: 5 | RNVC: 9
85-694-3225: RNCC: 6 | RNVC: 9

2 Aug 1989

5120-14-572-9553
Spanner Wrench

145729553
62785559AA: RNCC: 3 | RNVC: 2

30 Aug 2012

5120-14-249-9375

5120-14-345-4256
Enclechement Cle

143454256
26-139: RNCC: 3 | RNVC: 2

5 Oct 1977

5120-14-474-2112
Outillage Turbo Com

144742112
76545914800: RNCC: 3 | RNVC: 2
43589492: RNCC: 5 | RNVC: 2

1 Feb 1995

5120-14-558-2270
Hand Hammer

145582270
8017216: RNCC: 3 | RNVC: 2

15 Sep 2008

5120-14-298-8394

5120-14-452-9478
Outil Reglage Zero

144529478
S26-22677-0: RNCC: 3 | RNVC: 2
S26-22677-0: RNCC: 3 | RNVC: 9

29 Jan 1992

5120-14-393-7472
Spanner Wrench

143937472
NO PRIMARY REF14-393-7472: RNCC: 3 | RNVC: 2
N0TE83-2167: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-440-5442
Centreur

144405442
43370: RNCC: 3 | RNVC: 2
85-694-1104: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-410-4799
Socket Wrench Socket

144104799
457133: RNCC: 3 | RNVC: 2
457133: RNCC: 5 | RNVC: 9

2 Jul 1986

5120-14-315-1877
Mechanical Puller Attachment

143151877
0-79439-4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-488-3137
Socket Head Screw Key

144883137
84TZ.6: RNCC: 3 | RNVC: 2
3148511256527: RNCC: 5 | RNVC: 2
84TZ6: RNCC: 5 | RNVC: 2
0125652: RNCC: 5 | RNVC: 2
91767235: RNCC: 5 | RNVC: 2
0715 33 22: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-552-8422
Retaining Ring Pliers

145528422
177G.23: RNCC: 3 | RNVC: 2
177G.23: RNCC: 5 | RNVC: 2
3148511408537: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-291-1103
Socket Wrench Socket

142911103
0051240: RNCC: 3 | RNVC: 2
R.5L: RNCC: 5 | RNVC: 2
R5L: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-216-9138

5120-14-557-9264
Hydraulic Jack Handle

145579264
742-150-16: RNCC: 3 | RNVC: 2

31 Jul 2008

5120-14-378-5592
Open End Wrench

143785592
330A93-3064-20: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-425-3130
Spanner Wrench

144253130
453-65171-000: RNCC: 3 | RNVC: 2

30 Jun 1988

5120-14-488-4863
Socket Head Screw Key Set

144884863
84E.J1: RNCC: 3 | RNVC: 2
3148515328770: RNCC: 5 | RNVC: 2
84E-J1: RNCC: 5 | RNVC: 2
0532877: RNCC: 5 | RNVC: 9

14 May 1997

5120-14-532-8089
Open End Wrench

145328089
71-40: RNCC: 3 | RNVC: 2

17 Dec 2002

5120-14-357-2977
Socket Head Screw Key

143572977
06C138: RNCC: 3 | RNVC: 2
0059308M00: RNCC: 5 | RNVC: 2

7 Jun 1979

5120-14-378-4727
Socket Wrench Socket

143784727
8813286012: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-419-2574
Hand Material Handling Hook

144192574
530568: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-526-5952
Electrical Connector Inserter

145265952
44039796: RNCC: 3 | RNVC: 2

1 Aug 2001

5120-14-540-8401
Clamp Base Bench Vise

145408401
WM 536: RNCC: 3 | RNVC: 2
WORKMATE 536: RNCC: 5 | RNVC: 2
5011402100170: RNCC: 5 | RNVC: 2

23 Apr 2004

5120-14-539-3675
Socket Wrench Ratchet Attachment

145393675
400172: RNCC: 3 | RNVC: 2

8 Jan 2004

5120-14-387-2642
Bearing And Bushing Inserter

143872642
8813824000: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-227-8877
Hand Terminal Crimping Tool

142278877
860009: RNCC: 3 | RNVC: 2
FD1678: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-357-5834
Spanner Wrench

143575834
8810251001: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-382-6794
Wrench Kit

143826794
8813322000: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-397-4858
Terminal Crimping Tool Contact Positioner

143974858
73025042: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-222-6155
Socket Wrench Socket

142226155
NO PRIMARY REF14-222-6155: RNCC: 3 | RNVC: 2
40-5-5: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-466-5910
Bearing And Bushing Remover

144665910
851-500-002-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-311-7725
Open End Wrench

143117725
45.65: RNCC: 3 | RNVC: 2
3148511054000: RNCC: 5 | RNVC: 2
45-65: RNCC: 5 | RNVC: 2
0105400: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-219-4111
Obus De Montage

142194111
17-9-38: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-303-2759
Extracteur Hydrauli

143032759
U10BIS: RNCC: 3 | RNVC: 2
3148515218002: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-285-6287

5120-14-566-9659
Hand Shovel

145669659
49005139: RNCC: 3 | RNVC: 2

21 Jan 2011

5120-14-462-2110
Indicateur Position

144622110
206927B: RNCC: 3 | RNVC: 2
400794REP1: RNCC: 5 | RNVC: 2

15 Apr 1993

5120-14-225-3969

5120-14-436-3575
Flat Tip Screwdriver

144363575
22565-00-10: RNCC: 3 | RNVC: 2

19 Dec 1989

5120-14-412-9663
Spanner Wrench

144129663
M32-001: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-369-7960
Socket Wrench Adapter

143697960
30AM013-0000021: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-225-5594
Cle Pour Ecrou De F

142255594
41981A: RNCC: 3 | RNVC: 2
41981: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-532-1791
Screwdriver Bit

145321791
AMZ.P1-2: RNCC: 3 | RNVC: 2
3148510087672: RNCC: 5 | RNVC: 2

16 Oct 2002

5120-14-530-3010
A Tete P Tournevis

145303010
AEF.2X75E: RNCC: 3 | RNVC: 2
3148510049007: RNCC: 5 | RNVC: 2

29 May 2002

5120-14-251-4423
Forceps De Demontag

142514423
E18348: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-378-6894
Socket Head Screw Key

143786894
TF10A12003: RNCC: 3 | RNVC: 2
85-691-8022: RNCC: 6 | RNVC: 9

11 Aug 1982

5120-14-302-5046
Pion Tarage Ressort

143025046
NO PRIMARY REF14-302-5046: RNCC: 3 | RNVC: 2
42-27-04-022: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-333-7373

5120-14-281-7736

5120-14-229-2681
Clef Pour Anneau Se

142292681
VTR250-1135: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-448-3879
Spanner Wrench

144483879
NO PRIMARY REF14-448-3879: RNCC: 3 | RNVC: 2
509486: RNCC: 5 | RNVC: 9
509486: RNCC: 5 | RNVC: 9

26 Jun 1991

5120-14-349-1069
Hand-Operated Grommet And Eyelet Press

143491069
519100+519109: RNCC: 3 | RNVC: 2
519000+519109: RNCC: 5 | RNVC: 2
519000+OP/6: RNCC: 5 | RNVC: 2
PINCEWZ3AVECJEUDEP0SE6: RNCC: 5 | RNVC: 2

19 Apr 1978

5120-14-373-2290
Screwdriver Bit

143732290
ET 2-5: RNCC: 3 | RNVC: 2
ET2-5: RNCC: 5 | RNVC: 2

21 Oct 1981

5120-14-321-1497
Socket Wrench Adapter

143211497
J.236: RNCC: 3 | RNVC: 2
3148510290300: RNCC: 5 | RNVC: 2
J236: RNCC: 5 | RNVC: 2
314851029030: RNCC: 5 | RNVC: 2
0176976N00: RNCC: 5 | RNVC: 2
91561727: RNCC: 5 | RNVC: 2
J.236: RNCC: 5 | RNVC: 2
0029030: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-316-6090
Spanner Wrench

143166090
3777361-1: RNCC: 3 | RNVC: 2
3777361-1: RNCC: 5 | RNVC: 1
85-686-1824: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-385-9823
Spanner Wrench

143859823
0.411/60128: RNCC: 3 | RNVC: 2
0411-60128: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-350-0258
Mechanical Puller Attachment

143500258
3130S95-66-014: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-550-7950
Socket Wrench Extension

145507950
10536652B: RNCC: 3 | RNVC: 2

17 Jul 2006

5120-14-297-3666
Extracteur De Carte

142973666
923923: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-573-1170
Ratchet Wrench

145731170
467F.11: RNCC: 3 | RNVC: 2

17 Sep 2012

5120-14-292-8766

5120-14-283-1402

5120-14-411-3921
Sertissage Outil

144113921
DA17181: RNCC: 3 | RNVC: 2
DA17181: RNCC: 5 | RNVC: 2

6 Aug 1986

5120-14-563-8868
Flat Tip And Cross Tip Screwdriver Set

145638868
ANP.J6: RNCC: 3 | RNVC: 2
786752: RNCC: 5 | RNVC: 2

24 Mar 2010

5120-14-576-2913
Inserter And Remove

145762913
8811288005: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-498-3566
Meule

144983566
150X20X32-38A46NVBE: RNCC: 3 | RNVC: 2
91956339: RNCC: 3 | RNVC: 2
F300 0T 004 8716: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-352-7182
Cambreur De Ressort

143527182
C345920: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-491-0226
Pince

144910226
4602 012 100 010: RNCC: 3 | RNVC: 2
F300 0T 001 1022: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-476-3271
Socket Wrench Socket

144763271
S.23LA: RNCC: 3 | RNVC: 2
235-4321: RNCC: 5 | RNVC: 2
0055415: RNCC: 5 | RNVC: 9
FACOMS.23LA: RNCC: 5 | RNVC: 9

7 Jun 1995

5120-14-313-3027

5120-14-450-5206
Electrical Connector Inserter

144505206
974743: RNCC: 3 | RNVC: 2
65-9-01EM3800-926591: RNCC: 5 | RNVC: 2
974743: RNCC: 5 | RNVC: 9
65-9-01EM3800-926591: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-398-5697
Pliers

143985697
5149-12: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-381-9266
Vise Jaw Caps

143819266
330A93-2003-29: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-514-0093
Open End Wrench

145140093
ENFD29159-13X15: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-514-0118
Open End Wrench

145140118
ENFD29159-18X19: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-266-2366
Spanner Wrench

142662366
M208-25037: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-487-6643
Open End Wrench

144876643
8969-71200: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-320-4842
Flat Tip Screwdriver

143204842
261-3: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-477-0195
Spanner Wrench

144770195
3.07421.01: RNCC: 3 | RNVC: 2
RAB8508: RNCC: 5 | RNVC: 2

13 Jul 1995

5120-14-232-8702
Hand Terminal Crimping Tool

142328702
49935-8: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-369-8728

5120-14-369-6670
Outil Dinsertion

143696670
591: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-336-9504

5120-14-274-7408

5120-14-383-7535
Cle Male Embout

143837535
24C9136: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-385-3140
Tige Servocde Outil

143853140
360A93-3305-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-468-2165
Socket Wrench Socket

144682165
EF.R: RNCC: 3 | RNVC: 2
3148510227955: RNCC: 5 | RNVC: 2
0715 11 01: RNCC: 5 | RNVC: 2
022795: RNCC: 5 | RNVC: 9

14 Feb 1994

5120-14-552-5221
Screwdriver Bit

145525221
ENH.204: RNCC: 3 | RNVC: 2
ENH.204: RNCC: 5 | RNVC: 2
3148510238791: RNCC: 5 | RNVC: 2

11 Jan 2007

5120-14-456-3085
Open End Wrench

144563085
32731: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-458-6793
Face Spanner Wrench Socket

144586793
556724: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-369-7606
Face Spanner Wrench Socket

143697606
F46424: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-313-7259
Face Spanner Wrench Socket

143137259
C47186: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-264-9615
Spanner Wrench

142649615
0598-78: RNCC: 3 | RNVC: 2
RA598: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-314-5138
Hand Screw Jack Extension Cap

143145138
0014050191: RNCC: 3 | RNVC: 2
0014050191: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-530-7455
Spring Inserter And Remover

145307455
AC21813100: RNCC: 3 | RNVC: 2

3 Jul 2002

5120-14-437-9663
Hand Tube Flaring Tool Parts Kit

144379663
M16742: RNCC: 3 | RNVC: 2

28 Feb 1990

5120-14-421-2186
Wire Twister Pliers

144212186
8811375000: RNCC: 3 | RNVC: 2

11 Jan 1988

5120-14-467-0216
Hand Armament Subsystem Carrier

144670216
462111AA: RNCC: 3 | RNVC: 2

15 Dec 1993

5120-14-491-0414
Cle

144910414
75291576: RNCC: 3 | RNVC: 2
F300 0T 001 1687: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-535-8855
Handling Tool Arm

145358855
000H319898360-024REP101: RNCC: 3 | RNVC: 2
000H319898360-024B913MM: RNCC: 5 | RNVC: 2
SYQ2953: RNCC: 5 | RNVC: 2

25 Jun 2003

5120-14-378-5532
Bearing And Bushing Inserter

143785532
6803J32-1657-00: RNCC: 3 | RNVC: 2
6803360A32-1657-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-424-5438
Courro Montag Outil

144245438
8-0124: RNCC: 3 | RNVC: 2
9409760390: RNCC: 5 | RNVC: 2
9760-39: RNCC: 5 | RNVC: 2

27 May 1988

5120-14-384-6339
Electrical Card Extractor

143846339
16928966: RNCC: 3 | RNVC: 2
16928966: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-259-8055
Socket Head Screw Key

142598055
70726816: RNCC: 3 | RNVC: 2
BE131560: RNCC: 5 | RNVC: 9
70726816: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-575-8077
Socket Wrench

145758077
TM2012G001-: RNCC: 3 | RNVC: 2

3 May 2013

5120-14-349-1507

5120-14-384-2260
Centreur Cone Helic

143842260
06C165: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-545-5023
Spanner Wrench

145455023
BP-30200: RNCC: 3 | RNVC: 2

15 Apr 2005

5120-14-539-9991
Socket Head Screw Key

145399991
67-523: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-306-2233
Open End Wrench

143062233
34.17: RNCC: 3 | RNVC: 2
35-17X17: RNCC: 3 | RNVC: 2
91355129: RNCC: 5 | RNVC: 2
3148510981703: RNCC: 5 | RNVC: 2
34-17: RNCC: 5 | RNVC: 2
0191157X00: RNCC: 5 | RNVC: 2
18404: RNCC: 5 | RNVC: 2
91355129: RNCC: 5 | RNVC: 2
18404: RNCC: 5 | RNVC: 2
0098170: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-439-7791
Bearing And Bushing Inserter

144397791
6801G39-0118-00: RNCC: 3 | RNVC: 2

23 May 1990

5120-14-438-9699
Preformed Packing Inserter And Remover

144389699
330A98-3362-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-243-3187
Pliers

142433187
M16-014: RNCC: 3 | RNVC: 2
M16-014: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-263-8162

5120-14-370-6297
Outillage De Decoup

143706297
4105E11-1220-02: RNCC: 3 | RNVC: 2
4105330A11-1220-02: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-387-1913
De Montage Outil

143871913
MGK233-50: RNCC: 3 | RNVC: 2
MGK233-50: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-213-5590

5120-14-222-0891

5120-14-492-3817
Cle

144923817
5000261507: RNCC: 3 | RNVC: 2
F300 0T 007 5088: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-524-1336
Polygonal Mixte Cle

5120-14-551-3772
Hand Terminal Crimping Tool

145513772
169994-1: RNCC: 3 | RNVC: 2
AMP169994-1: RNCC: 5 | RNVC: 2
AMP169994-1: RNCC: 5 | RNVC: 2

14 Sep 2006

5120-14-476-3286
Retaining Ring Pliers

144763286
499.32A: RNCC: 3 | RNVC: 2
499.A: RNCC: 5 | RNVC: 2

7 Jun 1995

5120-14-448-4882
Spanner Wrench

144484882
MEH188-2: RNCC: 3 | RNVC: 2
89280447: RNCC: 5 | RNVC: 2

26 Jun 1991

5120-14-489-4887
Socket Wrench Socket

144894887
R.12F: RNCC: 3 | RNVC: 2
R12F: RNCC: 5 | RNVC: 2
3148510511146: RNCC: 5 | RNVC: 2
0051114: RNCC: 5 | RNVC: 9
AC85321: RNCC: 5 | RNVC: 9
F300 0T 023 6295: RNCC: 6 | RNVC: 9

23 Jul 1997

5120-14-551-1582
Mechanical Puller Set

145511582
U.J2: RNCC: 3 | RNVC: 2
U.J2: RNCC: 5 | RNVC: 2

30 Aug 2006

5120-14-360-7927
Screwdriver Bit

143607927
0001080: RNCC: 3 | RNVC: 2
A.202E: RNCC: 5 | RNVC: 2
A202E: RNCC: 5 | RNVC: 2

19 Dec 1979

5120-14-530-2072
Open End Wrench

145302072
18.3/8: RNCC: 3 | RNVC: 2
3148510933856: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-271-5230
Open End Wrench

142715230
0T2-2-29: RNCC: 3 | RNVC: 2
8000417700: RNCC: 3 | RNVC: 2
0T2-2-29: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-311-4509
Spanner Wrench

143114509
3130S95-47-010: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-358-3634
Flat Tip Screwdriver

143583634
706-3X100: RNCC: 3 | RNVC: 9
DEM706-3X100: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-298-5560
Open End Wrench

142985560
22.8X9: RNCC: 3 | RNVC: 2
3148510947600: RNCC: 5 | RNVC: 2
22-8X9: RNCC: 5 | RNVC: 2
0094760: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-435-5966
Preformed Packing Inserter And Remover

144355966
8813137000: RNCC: 3 | RNVC: 2

8 Nov 1989

5120-14-458-6713
Cross Tip Screwdriver

144586713
ADS.3VSE: RNCC: 3 | RNVC: 2
3148510047300: RNCC: 5 | RNVC: 2
H24136: RNCC: 5 | RNVC: 2
0004730: RNCC: 5 | RNVC: 9
AD.3VSE: RNCC: 5 | RNVC: 9
AD.3VSE: RNCC: 5 | RNVC: 9

29 Oct 1992

5120-14-220-8463
Adjustable Wrench

142208463
BBW153: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-417-1253
Spanner Wrench

144171253
095259S: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-522-2433
Bearing And Bushing Inserter

145222433
TC3035G001: RNCC: 3 | RNVC: 2

11 Oct 2000

5120-14-466-3717
De Montage Obus

144663717
61AM021: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-424-4445
Outil De Centrage

144244445
M13960: RNCC: 3 | RNVC: 2

19 May 1988

5120-14-040-4686
Cle

140404686
23990: RNCC: 3 | RNVC: 2
23990: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-506-7665
De Montage Outil

145067665
M13450: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-402-0300
Spanner Wrench

144020300
219721: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-466-3706
Spanner Wrench

144663706
61AM004: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-429-1537
Bearing And Bushing Remover

144291537
530521: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-527-8644
Torque Wrench Adapter

145278644
E2C001230000105: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-352-8568
Spanner Wrench

143528568
0UT47: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-479-4348
Flat Tip Screwdriver

144794348
204673: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-434-0862
Spanner Wrench

144340862
0886687S00: RNCC: 3 | RNVC: 2

5 Sep 1989

5120-14-429-1391
Spanner Wrench

144291391
536779: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-523-5460
Hydraulic Fitting Crimping Tool Head

145235460
DLT40PSHA4024A: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-351-2147
Socket Head Screw Key

143512147
489332H: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-416-7482
Mandrin Press

144167482
536929: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-564-9446
Drift

145649446
885567: RNCC: 3 | RNVC: 2

21 Jun 2010

5120-14-240-4780

5120-14-461-2802
Open End Wrench

144612802
45056450: RNCC: 3 | RNVC: 2
45056450: RNCC: 5 | RNVC: 9

3 Mar 1993

5120-14-283-1306
Spanner Wrench

142831306
T0120BBF5APL5REP4: RNCC: 3 | RNVC: 2
301702TREP4: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-438-1529
Open End Wrench

144381529
EMB7: RNCC: 3 | RNVC: 2
89099204: RNCC: 5 | RNVC: 2

7 Mar 1990

5120-14-538-9818
Quick Adjusting Screw Clamp

145389818
NGM0053894311392: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-506-9702
Flat Tip Screwdriver

145069702
AZE.5X175: RNCC: 3 | RNVC: 2
3148510134246: RNCC: 5 | RNVC: 2

27 May 1998

5120-14-433-1516
Open End Wrench

144331516
229880000: RNCC: 3 | RNVC: 2
22 988 0000: RNCC: 5 | RNVC: 9

11 Jul 1989

5120-14-274-8487
Clamp Base Bench Vise

142748487
4211-65: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-375-3191
Open End Wrench

143753191
11AR2732A: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-465-4225
Socket Head Screw Key Blade

144654225
0034080: RNCC: 3 | RNVC: 2
NEX.60: RNCC: 3 | RNVC: 2

29 Sep 1993

5120-14-405-6284
Spanner Wrench

144056284
OXB501-350-000-11: RNCC: 3 | RNVC: 2

4 Dec 1985

5120-14-321-8533
Hand Terminal Crimping Tool

143218533
C24: RNCC: 3 | RNVC: 2
C24: RNCC: 5 | RNVC: 9
85-647-8452: RNCC: 6 | RNVC: 9

1 Jan 1975

Load More Results