What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 84 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 84 of 110

5120-14-461-6887
Cle Male

5120-14-326-2701
Cle Hydrauliq Butee

143262701
330A93-2000-28: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-231-8823
Appui De Cric Outil

142318823
A1-22914: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-281-9836
Cle Speciale

142819836
HK1-23: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-295-2754
Spanner Wrench

142952754
CTM45-70: RNCC: 3 | RNVC: 2
H26: RNCC: 5 | RNVC: 2
AT5577: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-358-4687
Screwdriver Bit

143584687
NO PRIMARY REF14-358-4687: RNCC: 3 | RNVC: 2
0024616: RNCC: 5 | RNVC: 2
ES.138: RNCC: 5 | RNVC: 2
ES138: RNCC: 5 | RNVC: 2
ES8: RNCC: 5 | RNVC: 2
0189169F00: RNCC: 5 | RNVC: 2

13 Aug 1979

5120-14-284-2257

5120-14-505-9396
Flat Tip Screwdriver

145059396
ENFD6516-A1-2X6-5X175X290: RNCC: 3 | RNVC: 2
F300 0P 000 1299: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-340-8222
Spanner Wrench

143408222
57175DETA: RNCC: 3 | RNVC: 9
GSM475-049F3: RNCC: 5 | RNVC: 2

14 Feb 1977

5120-14-390-3185
Nez De Pose

143903185
80B40: RNCC: 3 | RNVC: 2
85-801-0738: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-292-0802
Appareil Positionne

142920802
NO PRIMARY REF14-292-0802: RNCC: 3 | RNVC: 2
V61: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-578-4725
Mechanical Puller S

145784725
8813420002: RNCC: 3 | RNVC: 2

3 Dec 2013

5120-14-209-5408
Verin Calage Regula

142095408
9970-111-059-00: RNCC: 3 | RNVC: 2
9970-111-059: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-461-3673
Bague Extraction

144613673
1X56-137-230: RNCC: 3 | RNVC: 2

9 Mar 1993

5120-14-394-4909
Cle Speciale

143944909
8942-606: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-365-0177
Socket Wrench Socket

143650177
S.3/8H: RNCC: 3 | RNVC: 2
3148510548005: RNCC: 5 | RNVC: 2
S3-8H: RNCC: 5 | RNVC: 2
0715 13 32: RNCC: 5 | RNVC: 2
0054800: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-336-1385

5120-14-386-1660
Pale Verificateur

143861660
8702J33-1040-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-220-8392

5120-14-228-5171

5120-14-264-1565

5120-14-421-6392
Bloc Ali Extracteur

144216392
3511 101 48661: RNCC: 3 | RNVC: 2
3511-101-48661: RNCC: 5 | RNVC: 2

20 Jan 1988

5120-14-032-0954
Bearing And Bushing Inserter And Remover

140320954
341A93-3111-00: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-350-7735
Spanner Wrench

143507735
OXB502-302-716-500: RNCC: 3 | RNVC: 2
0XB502-302-716-500: RNCC: 5 | RNVC: 2
85-638-2600: RNCC: 6 | RNVC: 9

12 Jul 1978

5120-14-463-5746
Pliers

144635746
186.7CPG: RNCC: 3 | RNVC: 2
3148511423806: RNCC: 5 | RNVC: 2
186-7CPG: RNCC: 5 | RNVC: 2
91638761: RNCC: 5 | RNVC: 9
0142380: RNCC: 5 | RNVC: 9

17 Jun 1993

5120-14-438-8784
Mechanical Puller Attachment

144388784
0805417K01: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-405-1548
Support Pr Banc Ess

144051548
779BE/LOG: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-215-3047
Cle A Ergots

5120-14-255-2483

5120-14-368-4058
Mechanical Puller Attachment

143684058
8813285004: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-321-6319
Spanner Wrench

143216319
C47308: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-306-2353
Spanner Wrench

143062353
4000W: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-393-0324
Flat Tip Screwdriver

143930324
AGN8X125: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-513-1455
Detent Handling Tool

145131455
0446795N00: RNCC: 3 | RNVC: 2

5 Mar 1999

5120-14-526-4780
Spanner Wrench

145264780
94AM121: RNCC: 3 | RNVC: 2

1 Aug 2001

5120-14-237-3328
Spanner Wrench

142373328
H90R1015: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-508-7207
Open End Wrench

145087207
CLE F0UR 25: RNCC: 3 | RNVC: 2

29 Sep 1998

5120-14-529-7664
Hand Armament Subsystem Carrier

145297664
Y165A003: RNCC: 3 | RNVC: 2

10 Apr 2002

5120-14-234-4266
Tige De Maintien De

142344266
17895T1REP9: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-350-6882
Sertissage Manchon

143506882
1DF27X150Z20: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-229-8590

5120-14-241-4061

5120-14-200-4159

5120-14-288-6978
Bague De Montage

142886978
D1553-4824: RNCC: 3 | RNVC: 2
D1553-4824: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-559-0902
Pliers

145590902
CLU01-196: RNCC: 3 | RNVC: 2

4 Dec 2008

5120-14-422-2328
Socket Head Screw Key

144222328
0436-01-120000: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-414-2719
Hand Hydraulic Jack Kit

144142719
MZ-31: RNCC: 3 | RNVC: 9

28 Jan 1987

5120-14-358-6828
Spanner Wrench

143586828
701932-00: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-557-2487
Mechanical Puller

145572487
U.2: RNCC: 3 | RNVC: 2
3148510656922: RNCC: 5 | RNVC: 2

27 May 2008

5120-14-490-6994
Wrench

144906994
241 W 02999 254: RNCC: 3 | RNVC: 2
F300 0T 000 1181: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-280-4037
Spanner Wrench

142804037
202478: RNCC: 3 | RNVC: 2
FL202478: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-429-1389
Spanner Wrench

144291389
536767: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-215-3048
Cle A Ergots

5120-14-204-8221

5120-14-370-4891
Electrical Contact Remover

143704891
8522-58: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-371-5709
Hand Material Handling Hook

143715709
9970-125-897: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-424-1162
Six Point Tip Screwdriver

144241162
NO PRIMARY REF14-424-1162: RNCC: 3 | RNVC: 2
3148510041094: RNCC: 5 | RNVC: 2
0004109: RNCC: 5 | RNVC: 9
ACX.25: RNCC: 5 | RNVC: 9

17 May 1988

5120-14-295-2835
Spanner Wrench

142952835
D1553-4999: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-321-8095
Bearing And Bushing Inserter And Remover

143218095
3160S95-63-015: RNCC: 3 | RNVC: 2
85-100-3200: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-532-2541
Combination Box And Open End Wrench

145322541
40R.8: RNCC: 3 | RNVC: 2
40R.8: RNCC: 5 | RNVC: 2

23 Oct 2002

5120-14-321-1533
Open End Wrench

143211533
13 9-16X5-8: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-352-1801
Plaque I Extracteur

143521801
AAV2044: RNCC: 3 | RNVC: 9

16 Oct 1978

5120-14-040-5743
Cle A Fourche Train

140405743
C46849: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-386-9746
Pince A Segment

143869746
24545975500: RNCC: 3 | RNVC: 2
245459755: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-271-6201
A Fourche Cle

5120-14-298-4778
Cross Tip Screwdriver

142984778
APB.0X40: RNCC: 3 | RNVC: 2
APB0.X40: RNCC: 5 | RNVC: 2
3148510091006: RNCC: 5 | RNVC: 2
APB 0X40: RNCC: 5 | RNVC: 2
91543067: RNCC: 5 | RNVC: 2
91767719: RNCC: 5 | RNVC: 2
0009100: RNCC: 5 | RNVC: 9
APB.0: RNCC: 5 | RNVC: 9
APB0: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-531-1202
Flat Tip Screwdriver

145311202
AR.5,5X150AVSE: RNCC: 3 | RNVC: 2
AR.5,5X150AVSE: RNCC: 5 | RNVC: 2
8038950Q00: RNCC: 5 | RNVC: 2

24 Jul 2002

5120-14-211-3764
Cle De Frein De Bou

142113764
D2604-40-7: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-220-8565

5120-14-221-0615

5120-14-489-0314
Socket Wrench Socket

144890314
0051084: RNCC: 3 | RNVC: 2

18 Jun 1997

5120-14-399-1108
Cle Culasse

143991108
5000261268: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-431-4902
Manchon Emmanchemen

144314902
BFP00629: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-348-9594
Sertissage Poincon

143489594
2074HHC53: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-436-0305
Centreur

144360305
RT32908: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-395-0765
Montage Cone

143950765
H46673: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-254-3551

5120-14-283-9732
Cle Butee De Verin

142839732
M3-068: RNCC: 3 | RNVC: 2
M3-068: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-439-5770
Controle Cle

144395770
74435: RNCC: 3 | RNVC: 2
74435: RNCC: 5 | RNVC: 9

15 May 1990

5120-14-477-2336
Socket Wrench Socket

144772336
AER330151: RNCC: 3 | RNVC: 2
AER330.151: RNCC: 5 | RNVC: 2

2 Aug 1995

5120-14-478-9665
Cle D'immobilisatio

144789665
2-50562: RNCC: 3 | RNVC: 2

4 Dec 1995

5120-14-229-5469
Doigt En Bronze Dal

142295469
4318955: RNCC: 3 | RNVC: 2
4318955: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-327-0847
Embout Tige Daccord

143270847
1065992: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-564-5259
Hand Hammer

145645259
205C.30: RNCC: 3 | RNVC: 2
786306: RNCC: 5 | RNVC: 2

4 May 2010

5120-14-032-3510
Entretoise Reglable

140323510
34907: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-383-1828
Poussoir

143831828
G1-15-267-61: RNCC: 3 | RNVC: 2
G1-15-267-61: RNCC: 5 | RNVC: 2
G1-15267-61: RNCC: 5 | RNVC: 2
G1-15267-61: RNCC: 5 | RNVC: 2
85-691-8749: RNCC: 6 | RNVC: 9

17 Mar 1983

5120-14-447-0166
Terminal Crimping Tool Contact Positioner

144470166
8400-2281: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-14-490-4531
Detent Handling Tool

144904531
0621141MECA040: RNCC: 3 | RNVC: 2
0621141MECA040: RNCC: 3 | RNVC: 9
SYQ0460: RNCC: 5 | RNVC: 2
62-040-1141/MECA CARRE DE 17: RNCC: 5 | RNVC: 9

30 Sep 1997

5120-14-325-3269
Socket Head Screw Key

143253269
2313028: RNCC: 3 | RNVC: 2
2313028: RNCC: 5 | RNVC: 1
85-607-4762: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-386-3894
Tube De Tarage

143863894
02640901200: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-493-2066
Cle

144932066
5000261601: RNCC: 3 | RNVC: 2
F300 0T 011 3440: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-543-4887
Hand Armament Subsystem Carrier

145434887
F1415300: RNCC: 3 | RNVC: 2

9 Nov 2004

5120-14-333-2696
Electrical Card Extractor

143332696
15160276: RNCC: 3 | RNVC: 2
15160276: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-539-0363
Socket Head Screw Key

145390363
NGM0059695033791: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-465-5585
Socket Head Screw Key

144655585
40196283: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-418-3446
Face Spanner Wrench Socket

144183446
8812803001: RNCC: 3 | RNVC: 2

12 Aug 1987

5120-14-425-9620
Bearing And Bushing Inserter

144259620
6160: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-323-4741
Spanner Wrench

143234741
61605: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-485-7118
Conducte Extracteur

144857118
A103441: RNCC: 3 | RNVC: 2
K100036: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-518-5136
Broche

145185136
KCNSX000001: RNCC: 3 | RNVC: 9

9 Feb 2000

5120-14-393-8826

5120-14-260-1464

5120-14-280-1409

5120-14-402-6519
Chemise Regl Plaque

144026519
8-0132B: RNCC: 3 | RNVC: 2
101232: RNCC: 5 | RNVC: 2

19 Jul 1985

5120-14-451-5221
Bearing And Bushing Inserter And Remover

144515221
549750: RNCC: 3 | RNVC: 2

21 Nov 1991

5120-14-494-1391
Cle

144941391
10248945: RNCC: 3 | RNVC: 2
F300 0T 015 7115: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-488-4075
Verro Manoeuvre Cle

144884075
TID23899: RNCC: 3 | RNVC: 2

7 May 1997

5120-14-401-2496
Cle A Fourch Embout

144012496
D024: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-040-5738
Douille A Creneaux

140405738
C46799: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-489-7910
Socket Wrench Socket

144897910
J.7/8H: RNCC: 3 | RNVC: 2
00.46.21.62: RNCC: 5 | RNVC: 2
3148510279701: RNCC: 5 | RNVC: 2
0027970: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-040-0665
Poussoir

140400665
NO PRIMARY REF14-040-0665: RNCC: 3 | RNVC: 2
BL43940: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-466-6846
Sertissag Outillage

144666846
853-600-449-0: RNCC: 3 | RNVC: 2

24 Nov 1993

5120-14-296-5483
Screw Thread Insert Inserter

142965483
01500169700: RNCC: 3 | RNVC: 2
32260660: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-318-6212
Spanner Wrench

143186212
C46309: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-247-1981

5120-14-459-3252
Seal Inserter And Remover

144593252
OS22719: RNCC: 3 | RNVC: 2
OS22719: RNCC: 5 | RNVC: 2

25 Nov 1992

5120-14-253-8798
Cle Pour Recul Du F

142538798
PA166-1M933-1P12: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-041-2702
Cle A Virer

140412702
45-921-27-03: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-032-1696
Spanner Wrench

140321696
718 BE.L0G: RNCC: 3 | RNVC: 2

1 Sep 1981

5120-14-444-7590
Face Spanner Wrench Socket

144447590
0478-200100: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-539-2331
Hose Strap Band Clamping Tool

145392331
P2000: RNCC: 3 | RNVC: 2

15 Dec 2003

5120-14-430-3455
Socle Maintien Bois

144303455
RT17393: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-443-9716

5120-14-373-6738
Mandrin De Montage

143736738
218342: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-239-5217

5120-14-209-4214
Douille Tournevis E

142094214
NO PRIMARY REF14-209-4214: RNCC: 3 | RNVC: 2
41-05: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-360-3724
Spanner Wrench

143603724
101990: RNCC: 3 | RNVC: 2
C66273: RNCC: 5 | RNVC: 2

23 Nov 1979

5120-14-461-6806
Cross Tip Screwdriver Set

144616806
ACPH.JS4: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-284-1884

5120-14-289-8696

5120-14-490-6973
Saw

144906973
241 S 00145 000: RNCC: 3 | RNVC: 2
F300 0T 000 1141: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-511-5478
Socket Wrench Ratchet Attachment

145115478
R.158: RNCC: 3 | RNVC: 2
3148510520681: RNCC: 5 | RNVC: 2
52068: RNCC: 5 | RNVC: 2
AA006673: RNCC: 6 | RNVC: 9

24 Dec 1998

5120-14-488-3135
Socket Head Screw Key

144883135
84TZ.3: RNCC: 3 | RNVC: 2
0125637: RNCC: 5 | RNVC: 2
84TZ3: RNCC: 5 | RNVC: 2
0715 33 19: RNCC: 5 | RNVC: 2
3148511256374: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-289-1436
Open End Wrench

142891436
1-617: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-540-9877
Blind Riveter Mandrel

145409877
359-M-3: RNCC: 3 | RNVC: 2
359M3: RNCC: 5 | RNVC: 2

5 May 2004

5120-14-316-9162
Mechanical Puller Adapter

143169162
0761880: RNCC: 3 | RNVC: 2
EMB0UTU51-22: RNCC: 5 | RNVC: 2
U.51B5-4: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-398-1990
Cle Adapt Deux Plat

143981990
853-100-092-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-322-1347
Oeilleto Adaptateur

143221347
121E95-190-13-0: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-340-7985
Spanner Wrench

143407985
14369-5005: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-516-7778
Open End Wrench

145167778
F00201607: RNCC: 3 | RNVC: 2
F00201607: RNCC: 5 | RNVC: 9

14 Oct 1999

5120-14-213-7053

5120-14-250-5576

5120-14-426-8303
Socket Head Screw Key

144268303
0419-40064: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-450-8957
Face Spanner Wrench Socket

144508957
30AM163: RNCC: 3 | RNVC: 2

23 Oct 1991

5120-14-491-2154
Spring Inserter And Remover

144912154
132023: RNCC: 3 | RNVC: 2
F300 0T 001 9062: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-439-2035
Spanner Wrench

144392035
39442322: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-444-3209

5120-14-443-9865

5120-14-401-1856

5120-14-322-6443
Rainureur

143226443
RAI616: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-220-7729

5120-14-214-9804

5120-14-332-1131
Protecteur Collecte

143321131
461-65011-000: RNCC: 3 | RNVC: 2
02-461-01021-000: RNCC: 5 | RNVC: 2
461-65011-000: RNCC: 5 | RNVC: 2

21 Feb 1996

5120-14-498-1755

5120-14-508-5639

5120-14-444-9004
Lissette

144449004
0140074G00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-283-1052
Cle De Decalage De

142831052
NO PRIMARY REF14-283-1052: RNCC: 3 | RNVC: 2
30-111797: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-373-7816
Socket Head Screw Key

143737816
88.10: RNCC: 3 | RNVC: 2
67B-10: RNCC: 3 | RNVC: 2
67B10: RNCC: 3 | RNVC: 2
0126578: RNCC: 5 | RNVC: 2
88-10: RNCC: 5 | RNVC: 2
91613165: RNCC: 5 | RNVC: 2
91634559: RNCC: 5 | RNVC: 2
O613 250 100: RNCC: 5 | RNVC: 2
3148511265789: RNCC: 5 | RNVC: 2
3272670212947: RNCC: 5 | RNVC: 2

13 Nov 1981

5120-14-545-5026
Spanner Wrench

145455026
BP-92600: RNCC: 3 | RNVC: 2

15 Apr 2005

5120-14-280-0532
Spanner Wrench

142800532
CZ53701: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-362-4013
Spanner Wrench

143624013
BAZ51361: RNCC: 3 | RNVC: 2
SP: RNCC: 5 | RNVC: 9

19 Mar 1980

5120-14-436-0266
Preformed Packing Inserter

144360266
RT30256: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-040-2905
Spanner Wrench

140402905
RT5361: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-530-9206
Socket Wrench Socket

145309206
39610: RNCC: 3 | RNVC: 2
3148510396101: RNCC: 5 | RNVC: 2
NM.22L: RNCC: 5 | RNVC: 2

17 Jul 2002

5120-14-322-8667

5120-14-379-8618
Calibre Outi Enfich

143798618
8499-06: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-227-8922
Spanner Wrench

142278922
35-26: RNCC: 3 | RNVC: 2
23002644: RNCC: 5 | RNVC: 2
23002644-5: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-383-6538
Spanner Wrench

143836538
15636J: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-220-7903
Open End Wrench

142207903
RACD17: RNCC: 3 | RNVC: 2
RACD17: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-397-5559
Bearing Staking Installation Tool

143975559
100351: RNCC: 3 | RNVC: 2
A132440: RNCC: 5 | RNVC: 2

14 Dec 1984

5120-14-382-5695
Electrical Card Extractor

143825695
16928923: RNCC: 3 | RNVC: 2
16928923: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-409-3785
Spanner Wrench

144093785
BL53985: RNCC: 3 | RNVC: 2
BL53985: RNCC: 5 | RNVC: 2
709712: RNCC: 5 | RNVC: 9
BL53985: RNCC: 5 | RNVC: 9

28 May 1986

5120-14-449-0149
Bearing And Bushing Inserter And Remover

144490149
45057747: RNCC: 3 | RNVC: 2
45057747: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-437-0677
Open End Wrench

144370677
11154: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-323-0561
Socket Wrench Socket

143230561
8810600150: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-304-2280
Plier Type Eyelet Punch

143042280
NO PRIMARY REF14-304-2280: RNCC: 3 | RNVC: 2
3322011: RNCC: 5 | RNVC: 9
N2: RNCC: 5 | RNVC: 9
3322011: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-374-0884
Socket Wrench Spanner Attachment

143740884
UHN302-43: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-226-3711
Socket Wrench Handle Bar

142263711
9251: RNCC: 3 | RNVC: 2
2501-96-14048: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-214-9311
Cle Speciale

142149311
60290-01-05-020M1: RNCC: 3 | RNVC: 2
9970-143-081: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-272-3707
Open End Wrench

142723707
E74302R8-9BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-352-5452
Open End Wrench

143525452
MH058-21-00: RNCC: 3 | RNVC: 2
MH058-21-00: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-273-6014
Spanner Wrench

142736014
50050: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-276-8694

5120-14-314-3743
Open End Wrench

143143743
MAS4683: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-509-3011
Socket Wrench Socket

145093011
56261486: RNCC: 3 | RNVC: 2

27 Oct 1998

5120-14-534-0799
Hand Terminal Crimping Tool

145340799
447.58-59: RNCC: 3 | RNVC: 2
3148511766057: RNCC: 5 | RNVC: 2

12 Mar 2003

5120-14-303-0244
Electrical Card Extractor

143030244
A16208825: RNCC: 3 | RNVC: 2
A16208825: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-535-2441
Face Spanner Wrench Socket

145352441
6501COC102: RNCC: 3 | RNVC: 2

14 May 2003

5120-14-292-8541
Rotary End Wire Brush

142928541
2625BR20: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-507-6108
Screwdriver Bit

145076108
ENH.308: RNCC: 3 | RNVC: 2
0023889: RNCC: 5 | RNVC: 2

29 Jul 1998

5120-14-387-8643
Spanner Wrench

143878643
OU50412: RNCC: 3 | RNVC: 2
50412: RNCC: 3 | RNVC: 2
0U50412: RNCC: 5 | RNVC: 2
50412: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-489-7893
Screwdriver Bit

144897893
ES.124,5T: RNCC: 3 | RNVC: 2
3148510249810: RNCC: 5 | RNVC: 2
0024981: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-373-8897
Pliers

143738897
18L120: RNCC: 3 | RNVC: 2
91396436: RNCC: 5 | RNVC: 2

8 Dec 1981

5120-14-466-4847
Bearing Staking Installation Tool

144664847
1063996T00: RNCC: 3 | RNVC: 2

15 Nov 1993

5120-14-252-2067

5120-14-214-3139

5120-14-317-7943
Roulement Outillage

143177943
NO PRIMARY REF14-317-7943: RNCC: 3 | RNVC: 2
800475-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-377-3010
Etau Support

143773010
MH034-21-00: RNCC: 3 | RNVC: 2
MH034-21-00: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-556-5034
Detent Handling Tool

145565034
722994: RNCC: 3 | RNVC: 2

14 Mar 2008

5120-14-239-4442
Cle Dajustement Spe

5120-14-234-3373

5120-14-395-7247

5120-14-326-2699
Vise Jaw Caps

143262699
330A93-2000-23: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-401-4068
Open End Wrench

144014068
355A93-5440-20: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-533-5958
Fixed Open End Wrench Set

145335958
44.P12D: RNCC: 3 | RNVC: 2
XX070783: RNCC: 6 | RNVC: 9

12 Feb 2003

5120-14-428-2344
Adjustable Wrench

144282344
GS 135 42MM: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-462-9127
Bearing And Bushing Inserter And Remover

144629127
45057990: RNCC: 3 | RNVC: 2
45057990: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-426-8266
Socket Head Screw Key

144268266
0419-40016: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-361-1820
Spanner Wrench

143611820
414950: RNCC: 3 | RNVC: 2

24 Jan 1980

5120-14-232-9385
Socket Head Screw Key

142329385
15055451: RNCC: 3 | RNVC: 2
55451: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-548-9353
Pliers

145489353
96150372AA: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-428-5543
Anti-Devers Plaque

144285543
MKG4592104: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-436-1071
Protecteur Cone

144361071
716556: RNCC: 3 | RNVC: 2

5 Dec 1989

5120-14-363-5173
Spanner Wrench

143635173
NO PRIMARY REF14-363-5173: RNCC: 3 | RNVC: 2
413813: RNCC: 5 | RNVC: 9
85-691-2596: RNCC: 6 | RNVC: 9

9 May 1980

5120-14-529-4327
Sheet Metalworking Dolly Block

145294327
6501EAD000-0004: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-313-8793
Open End Wrench

143138793
M2-047: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-379-6029
Outil Pour Soupapes

143796029
26545909400: RNCC: 3 | RNVC: 2
09087-03: RNCC: 5 | RNVC: 2
0908703: RNCC: 5 | RNVC: 2
26.545.9094.00: RNCC: 5 | RNVC: 2
26545909400: RNCC: 5 | RNVC: 2
265459094: RNCC: 5 | RNVC: 9

1 Oct 1982

5120-14-532-2419
Pliers

145322419
205.15CP: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-468-9819
Bearing And Bushing Inserter And Remover

144689819
40N108125: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-323-1997
Stud Inserter And Remover

143231997
587: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-471-7072
Electronic Component Inserter And Remover

144717072
0227183: RNCC: 3 | RNVC: 2
1805.18: RNCC: 5 | RNVC: 2

13 Sep 1994

5120-14-373-4927
Mandrin Special

143734927
214974: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-379-2107

5120-14-289-3818

5120-14-325-0289
Soupape Support

143250289
0S20890: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-383-0881
Maint Pigno Montage

143830881
9970-121-096: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-574-4333
Open End Wrench

145744333
AA7-62NF1-1435: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-14-364-1514

5120-14-216-1274
Outillage Demmanche

142161274
7781J: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-238-5448

5120-14-558-1287
Mechanical Puller

145581287
99497: RNCC: 3 | RNVC: 2

3 Sep 2008

5120-14-380-4061
Outillag Special Lo

5120-14-330-7525
Cross Tip Screwdriver

143307525
7375: RNCC: 3 | RNVC: 2
85-688-7959: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-413-3129
Screwdriver Bit

144133129
NO PRIMARY REF14-413-3129: RNCC: 3 | RNVC: 2
0024610: RNCC: 5 | RNVC: 2
ES.133: RNCC: 5 | RNVC: 2
ES133: RNCC: 5 | RNVC: 2
0237120A00: RNCC: 5 | RNVC: 2

26 Nov 1986

5120-14-370-8546
Passe-Fils Manche

143708546
1897569514: RNCC: 3 | RNVC: 2
85-691-6913: RNCC: 6 | RNVC: 9

5 Jun 1981

5120-14-507-0011
Screwdriver Bit

145070011
ENFD6526-C1-6X8X41X5-16: RNCC: 3 | RNVC: 2
F300 0P 000 1287: RNCC: 5 | RNVC: 2

3 Jun 1998

5120-14-313-9199
Jeu De Pose Oeillet

143139199
NO PRIMARY REF14-313-9199: RNCC: 3 | RNVC: 2
107JEUDEP0SEFEMELLE: RNCC: 5 | RNVC: 9
RECHBF107FEMELLE: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-279-2552
Inserted Hammer Face Holder

142792552
207-60: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-010-1227
Mechanical Puller Attachment

140101227
8000302002: RNCC: 3 | RNVC: 2
8810253002: RNCC: 5 | RNVC: 2

1 Jan 1961

5120-14-538-5003
Spanner Wrench

145385003
NGM0010038785674: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-277-3510
Spanner Wrench

142773510
8810424001: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-452-0303
Torque Wrench Adapter

144520303
19-29: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-438-2586
Screwdriver Bit

144382586
ENP.203: RNCC: 3 | RNVC: 2
3148510239033: RNCC: 5 | RNVC: 2
0023903: RNCC: 5 | RNVC: 9

12 Mar 1990

5120-14-200-5153
Cle A Trois Usages

142005153
AMG10006-1: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-394-3346
Mechanical Puller Adapter

143943346
20196324-4: RNCC: 3 | RNVC: 2
20196324-4: RNCC: 5 | RNVC: 9

28 Aug 1984

5120-14-368-7532
Electrical Card Extractor

143687532
19295763: RNCC: 3 | RNVC: 2

10 Mar 1981

5120-14-431-7791
Spanner Wrench

144317791
0411-60133: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-262-4786
Open End Wrench

142624786
3210-95-32-310-1: RNCC: 3 | RNVC: 2
3210-95-32-310-1: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-214-3085

5120-14-384-6323
Electrical Card Extractor

143846323
16928940: RNCC: 3 | RNVC: 2
16928940: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-526-1567
Preformed Packing Inserter

145261567
132314: RNCC: 3 | RNVC: 2

4 Jul 2001

5120-14-340-1823

5120-14-274-7930
Adjustable Wrench

142747930
IR2-150: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-356-5637
Socket Head Screw Key

143565637
E74331-6AL: RNCC: 2 | RNVC: 2

15 May 1979

5120-14-513-4353
Socket Head Screw Key

145134353
NO PRIMARY REF14-513-4353: RNCC: 3 | RNVC: 2
NNP 5120860703321: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-362-7879
Spanner Wrench

143627879
239700-78: RNCC: 3 | RNVC: 2
TF10A32304: RNCC: 5 | RNVC: 2
85-688-4603: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-553-1087
Spanner Wrench

145531087
1701384: RNCC: 3 | RNVC: 2

2 Mar 2007

5120-14-422-2309
Spanner Wrench

144222309
0471-204700: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-507-0306
Spanner Wrench

145070306
126.A80: RNCC: 3 | RNVC: 2
3148511346990: RNCC: 5 | RNVC: 2

3 Jun 1998

5120-14-373-6775
Open End Wrench

143736775
225769: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-347-1222
Socket Wrench Socket

143471222
NS.15: RNCC: 3 | RNVC: 2
3148510420707: RNCC: 5 | RNVC: 2
NS15: RNCC: 5 | RNVC: 2
0714 13 07: RNCC: 5 | RNVC: 2
0042070: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-421-6313
Socket Wrench Crowfoot Attachment

144216313
210496: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-427-1082
Socket Wrench Extension

144271082
540909: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-431-7789
Spanner Wrench

144317789
0411-60129: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-280-1403

5120-14-243-3122

5120-14-380-8924

5120-14-541-7064
Combination Box And Open End Wrench

145417064
40R.24: RNCC: 3 | RNVC: 2
3148511011966: RNCC: 5 | RNVC: 2
40R.24: RNCC: 5 | RNVC: 2

22 Jun 2004

5120-14-214-9723
Spanner Wrench

142149723
0UT3: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-422-9123
Socket Wrench Extension

144229123
ZF05956976: RNCC: 3 | RNVC: 2
5956976: RNCC: 5 | RNVC: 2
ZF05956976: RNCC: 5 | RNVC: 2

24 Mar 1988

5120-14-546-5951
Drift

145465951
MLT266010200: RNCC: 3 | RNVC: 2

21 Jul 2005

5120-14-412-6501
Raccord

144126501
DIV/AT1035-1/1-85: RNCC: 3 | RNVC: 2

21 Oct 1986

5120-14-399-2837
Ga Plateau Tournant

143992837
341A91-0050-08: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-431-4883
Socket Head Screw Key

144314883
0372-42-10039: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-363-0337
Face Spanner Wrench Socket

143630337
2969: RNCC: 3 | RNVC: 2
2969: RNCC: 5 | RNVC: 9
2969: RNCC: 5 | RNVC: 9

3 Apr 1980

5120-14-539-2754
Flat Tip Screwdriver

145392754
ACZ.4X150: RNCC: 3 | RNVC: 2
ACZ.4X150: RNCC: 5 | RNVC: 2
1077560R00: RNCC: 5 | RNVC: 2

17 Dec 2003

5120-14-438-7607
Seal Inserter And Remover

144387607
100844: RNCC: 3 | RNVC: 2
C54293: RNCC: 5 | RNVC: 2

4 Apr 1990

5120-14-497-4395
Socket Head Screw Key

144974395
84TC.4: RNCC: 3 | RNVC: 2
84TC.4: RNCC: 5 | RNVC: 2
FZ84TC4: RNCC: 5 | RNVC: 9
F300 0T 023 1810: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-274-8551
Flat Tip Screwdriver

142748551
BB63: RNCC: 3 | RNVC: 9
91416931: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-514-4996
Pliers

145144996
10371040: RNCC: 1 | RNVC: 2
RP192: RNCC: 3 | RNVC: 2

26 May 1999

5120-14-382-7295
Electrical Card Extractor

143827295
SAF6019: RNCC: 3 | RNVC: 2
SAF6019: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-566-4255
Ratchet Wrench

145664255
I981M5111A7G0001-09: RNCC: 3 | RNVC: 2

15 Nov 2010

5120-14-324-8879
Cale Circuit Magnet

143248879
0-41102-5: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-318-5272
Solid Center Punch

143185272
08P248REP4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-435-6693
Spanner Wrench

144356693
59096392: RNCC: 3 | RNVC: 9

15 Nov 1989

5120-14-439-3883
Spanner Wrench

144393883
J47976: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-538-8279
Spanner Wrench

145388279
NGM0011045760471: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-430-3434
Preformed Packing Inserter

144303434
RT16985: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-506-2474
Socket Head Screw Key Set

145062474
82H.JU13: RNCC: 3 | RNVC: 2
3148515327612: RNCC: 5 | RNVC: 2

15 Apr 1998

5120-14-456-3067
Open End Wrench

144563067
11208: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-406-1075
Socket Wrench Adapter

144061075
001258: RNCC: 3 | RNVC: 2
01258: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-548-6972
Socket Wrench Socket

145486972
SJ.13H: RNCC: 3 | RNVC: 2

1 Feb 2006

5120-14-508-6080
Flat Tip Screwdriver

145086080
ACZH.8X175: RNCC: 3 | RNVC: 2
W269301000093: RNCC: 5 | RNVC: 2
0004156: RNCC: 5 | RNVC: 2
ACGH.8X175: RNCC: 5 | RNVC: 2
ACZH.8X175: RNCC: 5 | RNVC: 2

22 Sep 1998

5120-14-417-4636
Type Bague

144174636
2763040: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-322-7440
Universal Puller Kit

143227440
73101-01-30-02BREP1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-421-0787
Pince Cloche

144210787
6254-58481: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-553-3001
Pliers

145533001
PC-03-60C-200: RNCC: 3 | RNVC: 2

21 Mar 2007

5120-14-518-4166
Plug Electrical Connector Extractor

145184166
MP6816-06: RNCC: 3 | RNVC: 9

4 Feb 2000

5120-14-442-2401
Bague De Retreint

144422401
H47004: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-491-0074
Presse

144910074
4602 000 600 013: RNCC: 3 | RNVC: 2
F300 0T 001 0847: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-576-6135
Inserter And Remove

145766135
8810546404: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-260-3927

5120-14-300-0470

5120-14-302-2619
Mattock

143022619
15BISCANT0NNIER: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-463-3313
Cable Tie Installation Tool

144633313
0000033600: RNCC: 3 | RNVC: 2
336: RNCC: 5 | RNVC: 2

9 Jun 1993

5120-14-572-1121
Socket Wrench Set

145721121
STM.J9: RNCC: 3 | RNVC: 2
3148517415973: RNCC: 5 | RNVC: 2
741597: RNCC: 5 | RNVC: 2

7 Jun 2012

5120-14-220-8198
Open End Wrench

142208198
BB74-9X12: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-396-3929
Cle Speciale

143963929
IF032-302: RNCC: 3 | RNVC: 9
RAB7677: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-441-2214
Bearing And Bushing Inserter And Remover

144412214
6801V32-2795-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-418-1885
Bearing And Bushing Inserter

144181885
332A93-3119-00: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-514-7328
Cross Tip Screwdriver

145147328
ENFD6568-4X200: RNCC: 3 | RNVC: 2

11 Jun 1999

5120-14-428-5181
Spanner Wrench

144285181
NO PRIMARY REF14-428-5181: RNCC: 3 | RNVC: 2
48194: RNCC: 5 | RNVC: 9

8 Dec 1988

5120-14-573-6876
Screwdriver Bit Holder

145736876
EA156A00-70: RNCC: 3 | RNVC: 2

5 Nov 2012

5120-14-383-6532
Open End Wrench

143836532
S16-0646-0230: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-269-5231
Spanner Wrench

142695231
D1512-2204: RNCC: 3 | RNVC: 2
D1512-2204: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-317-3952
Electrical Contact Remover

143173952
20862: RNCC: 3 | RNVC: 2
91508774: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-264-9590
Spanner Wrench

142649590
0320-78: RNCC: 3 | RNVC: 2
RA320: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-459-2597
Emmanchement Outil

144592597
MMG047-76: RNCC: 3 | RNVC: 2
MMG047-76: RNCC: 5 | RNVC: 2

19 Nov 1992

5120-14-383-1829
Mecanisme Tarage

143831829
G1-15-267-63: RNCC: 3 | RNVC: 2
G1-15267-63: RNCC: 5 | RNVC: 2
G1-15-267-63: RNCC: 5 | RNVC: 2
G1-15267-63: RNCC: 5 | RNVC: 2
85-691-8748: RNCC: 6 | RNVC: 9

17 Mar 1983

5120-14-290-8390
Mechanical Puller Attachment

142908390
470165: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-284-3384
Cle Presse-Etoupe

142843384
R28019SM5: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-377-4291

5120-14-214-2828
Cle Speciale Pour E

142142828
9970-115-227: RNCC: 3 | RNVC: 2
9970-115-227-01: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-270-5175
Cle De Plateau Dacc

142705175
0960-45-77-16412DET5: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-261-9239
Extracteur De Plati

142619239
4075-100A072: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-202-1710
Cle Pour Ecrou Arbr

142021710
8000406700: RNCC: 3 | RNVC: 2
800-04-067-00: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-470-1578
Bearing And Bushing Remover

144701578
3210-97-31-350-1: RNCC: 3 | RNVC: 2

1 Jun 1994

5120-14-456-7140
Devrillage Pince

144567140
853-930-154-0: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-391-8169
Ecrou Superieur Cle

143918169
366A93-3102-20: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-548-9352
Screwdriver Bit Holder

145489352
45735262: RNCC: 3 | RNVC: 2

23 Feb 2006

5120-14-416-7450
Montage Outil

144167450
530541: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-462-0577
Co Control Appareil

144620577
512828JTRAM2: RNCC: 3 | RNVC: 2
512828J: RNCC: 5 | RNVC: 2

31 Mar 1993

5120-14-306-5308

5120-14-575-1350
Mechanical Puller Gear Adapter

145751350
10630967: RNCC: 3 | RNVC: 1

15 Mar 2013

5120-14-223-3040

5120-14-543-5491
Hand Terminal Crimping Tool

145435491
702918: RNCC: 3 | RNVC: 2
MONT 702918: RNCC: 5 | RNVC: 2

19 Nov 2004

5120-14-315-5986
Screwdriver Bit

143155986
EP.204: RNCC: 3 | RNVC: 2
3148510240848: RNCC: 5 | RNVC: 2
EP.204: RNCC: 5 | RNVC: 2
EP.204: RNCC: 5 | RNVC: 2
0024084: RNCC: 5 | RNVC: 9
EP4: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-545-1709
Clamp Base Bench Vise

145451709
1728M11: RNCC: 3 | RNVC: 2

23 Mar 2005

5120-14-506-1180
Stakeholder Bench Plate

145061180
CKS30: RNCC: 3 | RNVC: 2

6 Apr 1998

5120-14-427-3863
Ring Retaining Pliers Tip Set

144273863
470.E10: RNCC: 3 | RNVC: 2
3059001556: RNCC: 5 | RNVC: 2
3148511779705: RNCC: 5 | RNVC: 2
0177970: RNCC: 5 | RNVC: 9

15 Oct 1988

5120-14-239-6375

5120-14-552-7584
Cross Tip Screwdriver

145527584
AD.2X125AVSE: RNCC: 3 | RNVC: 2
AD.2X125AVSE: RNCC: 5 | RNVC: 2
3148510043272: RNCC: 5 | RNVC: 2

30 Jan 2007

5120-14-424-3480
Socket Wrench Socket

144243480
K.22A: RNCC: 3 | RNVC: 2
3148510292052: RNCC: 5 | RNVC: 2
K22A: RNCC: 5 | RNVC: 2
0029205: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-428-5546
Manual Control Lever

144285546
MKG4592107: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-506-2582
Open End Wrench

145062582
11118903400: RNCC: 3 | RNVC: 2

16 Apr 1998

5120-14-406-4312
Electrical Contact Inserter

144064312
19104: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-348-0794
Socket Head Screw Key

143480794
510430: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-431-7788
Spanner Wrench

144317788
0411-60126: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-513-1760
Detent Handling Tool

145131760
10427020: RNCC: 3 | RNVC: 2

9 Mar 1999

5120-14-422-2444
Socket Wrench Spanner Attachment

144222444
0378-38198: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-542-1800
Hole Sheet Metal Holder

145421800
591050908: RNCC: 3 | RNVC: 2
591050908: RNCC: 5 | RNVC: 9

8 Jul 2004

5120-14-553-6341
Carpenters' Pincers

145536341
495A.28EL: RNCC: 3 | RNVC: 2
MO003351: RNCC: 6 | RNVC: 9

26 Apr 2007

5120-14-502-3596
Torque Wrench Multiplier

145023596
NP.400: RNCC: 3 | RNVC: 2
3148515102509: RNCC: 5 | RNVC: 2
NP 400: RNCC: 5 | RNVC: 2
0510250: RNCC: 5 | RNVC: 9

9 Dec 1997

5120-14-504-0794
Retaining Ring Installation Tool

145040794
7349A: RNCC: 3 | RNVC: 2

5 Feb 1998

5120-14-249-6788
Tournevis Special

142496788
2-02624: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-237-3725
Spanner Wrench

142373725
H90R1002A: RNCC: 3 | RNVC: 2
530514: RNCC: 5 | RNVC: 2
H90R1002A: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-524-1045
Retaining Ring Pliers

145241045
197E.32: RNCC: 3 | RNVC: 2
3148511456897: RNCC: 5 | RNVC: 2
SYQ5181: RNCC: 5 | RNVC: 2
0145689: RNCC: 5 | RNVC: 9

28 Feb 2001

5120-14-359-0280
Electrical Contact Inserter

143590280
8700-39: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-469-8601
Socket Head Screw Key Set

144698601
62M0-6: RNCC: 3 | RNVC: 2
62M06: RNCC: 3 | RNVC: 2
3272670237766: RNCC: 5 | RNVC: 2

16 May 1994

5120-14-403-3480
Mechanical Puller Attachment

144033480
8-0134K: RNCC: 3 | RNVC: 2
101244: RNCC: 5 | RNVC: 2

21 Aug 1985

5120-14-421-5884
Socket Wrench Adapter

144215884
NO PRIMARY REF14-421-5884: RNCC: 3 | RNVC: 2
0031095: RNCC: 5 | RNVC: 2
K.230A: RNCC: 5 | RNVC: 2
K230A: RNCC: 5 | RNVC: 2
91629358: RNCC: 5 | RNVC: 2

20 Jan 1988

5120-14-309-0513
Extracteur Plaque I

143090513
3511 180 00421: RNCC: 3 | RNVC: 2
3511-180-00421: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-578-5326
Torque Handle

145785326
M26570: RNCC: 3 | RNVC: 2
6250-62176: RNCC: 5 | RNVC: 1

9 Dec 2013

5120-14-527-0811
Mandrin

145270811
378-11563: RNCC: 3 | RNVC: 2
378-11563: RNCC: 3 | RNVC: 2

1 Oct 2001

5120-14-389-2517
Socle Lourd Etau

143892517
308: RNCC: 3 | RNVC: 2
85-691-1477: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-252-2066

5120-14-366-4842
Fixed Open End Wrench Set

143664842
0UTT01: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-422-2424
Socket Wrench Spanner Attachment

144222424
0377-48212: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-445-7029
Electrical Contact Remover

144457029
DBCX: RNCC: 3 | RNVC: 2

22 Feb 1991

5120-14-529-8674
Socket Wrench Socket Set

145298674
RL.40U: RNCC: 3 | RNVC: 2
3148515134937: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-456-8206
Bearing And Bushing Remover

144568206
45057784: RNCC: 3 | RNVC: 2
45057784: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-416-7609
Speciale Cle

144167609
537472: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-403-8789
Extracteur De Buse

144038789
25545911600: RNCC: 3 | RNVC: 2
255459116: RNCC: 5 | RNVC: 9

28 Aug 1985

5120-14-234-3350

5120-14-559-6084
Mechanical Puller

145596084
8812596000: RNCC: 3 | RNVC: 2

2 Feb 2009

5120-14-334-0442

5120-14-274-5306

5120-14-341-3182
Cle Serrag Divergen

143413182
055B70-544716F: RNCC: 3 | RNVC: 2
0544716F00: RNCC: 5 | RNVC: 2

16 Mar 1977

5120-14-569-2813
Spanner Wrench

145692813
S47643: RNCC: 3 | RNVC: 2
S47643: RNCC: 5 | RNVC: 2

31 Aug 2011

5120-14-238-2968

5120-14-482-1972
Spanner Wrench

144821972
LN324-017-DN40: RNCC: 3 | RNVC: 2
RAB9389: RNCC: 5 | RNVC: 2

26 Jun 1996

5120-14-355-5744
Cable Type Ratchet Lever Puller

143555744
P258M41M48: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-317-5218
Spanner Wrench

143175218
0U50098: RNCC: 3 | RNVC: 2
50098: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-383-9564
Socket Head Screw Key

143839564
36154: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-477-1954
Adjustable Wrench

144771954
91ABC81: RNCC: 3 | RNVC: 2
RAB8593: RNCC: 5 | RNVC: 2

2 Aug 1995

5120-14-551-0047
Vise Jaw Caps

145510047
F46835: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-431-7793
Spanner Wrench

144317793
0411-60141: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-203-0080
Spanner Wrench

142030080
3847: RNCC: 3 | RNVC: 2
CR0ISSANT3: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-479-7069
Open End Wrench

144797069
44.12X13: RNCC: 3 | RNVC: 2
3148511023914: RNCC: 5 | RNVC: 2
0187051T00: RNCC: 5 | RNVC: 2
91369664: RNCC: 5 | RNVC: 2
0102391: RNCC: 5 | RNVC: 9

31 Jan 1996

5120-14-343-1814
Screw Thread Insert Inserter

143431814
01500222400: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-552-1945
Socket Wrench Screwdriver Attachment

145521945
STM.7: RNCC: 3 | RNVC: 2
STM.7: RNCC: 5 | RNVC: 2

1 Dec 2006

5120-14-506-6661
Tap And Reamer Wrench

145066661
200-0: RNCC: 3 | RNVC: 2
N0: RNCC: 3 | RNVC: 2

6 May 1998

5120-14-200-9162

5120-14-491-9346
Cle

144919346
229553P: RNCC: 3 | RNVC: 2
F300 0T 006 1219: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-248-1116
Montage De Sertissa

142481116
12019: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-503-3223
Embout Pour Arc

145033223
653: RNCC: 3 | RNVC: 2

9 Jan 1998

5120-14-436-0233
Preformed Packing Inserter

144360233
807640: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-433-3243
Sheet Metalworking Dolly Block

144333243
536702: RNCC: 3 | RNVC: 2
00536702: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-459-1653
Seal Inserter And Remover

144591653
45215302: RNCC: 3 | RNVC: 2
45215302: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-284-0515
Socket Wrench Ratchet Attachment

142840515
R5100: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-452-9040
Socket Head Screw Key

144529040
4160319: RNCC: 3 | RNVC: 2

27 Jan 1992

5120-14-432-3885
Flat Tip Screwdriver

144323885
548495: RNCC: 3 | RNVC: 2
00548495: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-401-2583
Spanner Wrench

144012583
219724: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-300-0391
Screwdriver Bit

143000391
MAS11M30: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-322-1335

5120-14-216-4174
Socket Wrench Crowfoot Attachment

142164174
300252: RNCC: 3 | RNVC: 2
881-00-030-57: RNCC: 5 | RNVC: 2
100-10A: RNCC: 5 | RNVC: 2
100-110A: RNCC: 5 | RNVC: 2
W0F110A: RNCC: 5 | RNVC: 2
8810003057: RNCC: 5 | RNVC: 2
110: RNCC: 5 | RNVC: 2
110A: RNCC: 5 | RNVC: 2
DIAMETRE10ASERIE100: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-393-8859
Jonc Guide

143938859
NO PRIMARY REF14-393-8859: RNCC: 3 | RNVC: 2
OU138119: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-512-4423
Outil De Demontage

145124423
IF2-006-113: RNCC: 3 | RNVC: 9

16 Feb 1999

5120-14-420-7210
Socket Wrench Spanner Attachment

144207210
6224-34971: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-361-4898
Spanner Wrench

143614898
8810251000: RNCC: 3 | RNVC: 2
85-691-1823: RNCC: 6 | RNVC: 9

24 Jan 1980

5120-14-416-5147
Spanner Wrench

144165147
7527-20900: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-480-9012
Combination Box And Open End Wrench

144809012
GS130-32: RNCC: 3 | RNVC: 2

11 Apr 1996

5120-14-462-2108
Socket Wrench Socket

144622108
206157E: RNCC: 3 | RNVC: 2
400794REP2: RNCC: 5 | RNVC: 2

15 Apr 1993

5120-14-439-2042
Spanner Wrench

144392042
39442332: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-323-9251
Socket Head Screw Key Set

143239251
81.JL7: RNCC: 3 | RNVC: 2
3148515326400: RNCC: 5 | RNVC: 2
81JL7: RNCC: 5 | RNVC: 2
0715 31 15: RNCC: 5 | RNVC: 2
0532640: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-511-1072
Sheet Metalworking Dolly Block

145111072
3540006: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-375-8001
Bearing And Bushing Inserter

143758001
16380992: RNCC: 3 | RNVC: 2
16380992: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-236-8773
Open End Wrench

142368773
0821-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-341-0169
Spanner Wrench

143410169
0415-17: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-425-6906
Socket Wrench Socket

144256906
8813721000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-515-8739
Hand Terminal Crimping Tool

145158739
0-0575937-0: RNCC: 3 | RNVC: 2

18 Aug 1999

5120-14-265-0918
Plaque Demmanchemen

142650918
330A98-2047-20: RNCC: 3 | RNVC: 2
330A98-2047-2000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-271-6995

5120-14-424-8080
Flat Tip Screwdriver

144248080
702-6X40: RNCC: 3 | RNVC: 9
DEM702-6X40: RNCC: 5 | RNVC: 9

9 Jun 1988

5120-14-570-7638
Cross Tip Screwdriver

145707638
TB-1PZ100: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-520-7062
Kit Bouterolle

145207062
AT108A-33: RNCC: 3 | RNVC: 2

5 Jun 2000

5120-14-239-9249
Deverouillage Manue

142399249
3210-96-75-000A: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-275-0993
Electron Tube Pin Straightener

142750993
16258: RNCC: 3 | RNVC: 2
16258: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-238-1346
Open End Wrench

142381346
308954: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-253-9735
Extracteur Special

142539735
PR47248: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-280-1441

5120-14-434-0783
Hand Tube Flaring Tool

144340783
275-FS: RNCC: 3 | RNVC: 2

4 Sep 1989

5120-14-453-4923
Flat Tip Screwdriver

144534923
ARB.4X40: RNCC: 3 | RNVC: 2
3148510106908: RNCC: 5 | RNVC: 2
ARB4X40: RNCC: 5 | RNVC: 2
91632622: RNCC: 5 | RNVC: 2
0010690: RNCC: 5 | RNVC: 9

24 Feb 1992

5120-14-419-2564
Manchon De Montage

144192564
530509: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-375-8059
Vise Jaw Caps

143758059
300A99104: RNCC: 3 | RNVC: 2
91386589: RNCC: 5 | RNVC: 2
300A99104: RNCC: 5 | RNVC: 2
300A99104: RNCC: 5 | RNVC: 9
300A99104: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-459-7311
Spanner Wrench

144597311
5U14240: RNCC: 3 | RNVC: 2
M9140431P267: RNCC: 5 | RNVC: 2

15 Dec 1992

5120-14-289-1628
Flat Tip Screwdriver Set

142891628
AG.JS5: RNCC: 3 | RNVC: 2
0240573S00: RNCC: 5 | RNVC: 2
3148515004100: RNCC: 5 | RNVC: 2
91636520: RNCC: 5 | RNVC: 2
0500410: RNCC: 5 | RNVC: 9
AS1: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-383-9292
Screw Thread Insert Inserter

143839292
01500110360: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-247-9626
Spanner Wrench

142479626
RT9312: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-271-6134

5120-14-202-1111
Flat Tip Screwdriver

142021111
NO PRIMARY REF14-202-1111: RNCC: 3 | RNVC: 2
PERFECT74673-275: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-458-1572
Sheet Metalworking Dolly Block

144581572
908: RNCC: 3 | RNVC: 2
3148512132202: RNCC: 5 | RNVC: 2
0213220: RNCC: 5 | RNVC: 9
85-694-6894: RNCC: 6 | RNVC: 9

8 Oct 1992

5120-14-450-4032
Bearing Staking Installation Tool

144504032
NO PRIMARY REF14-450-4032: RNCC: 3 | RNVC: 2
BL53975: RNCC: 5 | RNVC: 9

3 Oct 1991

5120-14-514-8407
Cross Tip Screwdriver

145148407
ENFD6569-3X150: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-570-4054

5120-14-475-1631
Socket Head Screw Key

144751631
0123800: RNCC: 3 | RNVC: 2
83.S1,5: RNCC: 5 | RNVC: 2
83S1-5: RNCC: 5 | RNVC: 2

22 Mar 1995

5120-14-469-9047
Open End Wrench

144699047
D14-8: RNCC: 3 | RNVC: 2
46.8VSE: RNCC: 3 | RNVC: 2
3148511055809: RNCC: 5 | RNVC: 2
0105580: RNCC: 5 | RNVC: 9
MO003130: RNCC: 6 | RNVC: 9

18 May 1994

5120-14-337-0847
Mechanical Puller Attachment

143370847
91010-2: RNCC: 3 | RNVC: 2
91010-2: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-434-1159
Open End Wrench

144341159
MNO2402369: RNCC: 3 | RNVC: 2
MD0-2402369: RNCC: 5 | RNVC: 1

6 Sep 1989

5120-14-272-3656
Open End Wrench

142723656
E74302C24-25WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-518-9511
Socket Wrench Socket

145189511
0014150: RNCC: 3 | RNVC: 2

1 Mar 2000

5120-14-488-3555
Socket Head Screw Key

144883555
P45729: RNCC: 3 | RNVC: 2

30 Apr 1997

5120-14-522-2942
Spanner Wrench

145222942
0UT206: RNCC: 3 | RNVC: 2
OUT206: RNCC: 5 | RNVC: 2

19 Oct 2000

5120-14-352-0624
Spanner Wrench

143520624
055W02-538012L: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-424-9825
Wrench Extension Handle

144249825
M4HZ7101938504: RNCC: 3 | RNVC: 2

16 Jun 1988

5120-14-442-5458
Flat Tip Screwdriver

144425458
AC.3X100: RNCC: 3 | RNVC: 2
0003818: RNCC: 5 | RNVC: 2
3148510038186: RNCC: 5 | RNVC: 2
AC3X100: RNCC: 5 | RNVC: 2
1049230Q00: RNCC: 5 | RNVC: 2
91634816: RNCC: 5 | RNVC: 2
H24180: RNCC: 5 | RNVC: 2
AC.3X100: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-420-8794
Socket Wrench Adapter

144208794
16965973: RNCC: 3 | RNVC: 2
16965973: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-352-7184
Relais Demont Outil

143527184
CGB9115A: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-230-8131

5120-14-270-9333

5120-14-560-8795
Cross Tip Screwdriver

145608795
AP1X100VE: RNCC: 3 | RNVC: 2
3148517747357: RNCC: 5 | RNVC: 2

28 May 2009

5120-14-575-0311
Mechanical Puller

145750311
62032820AA: RNCC: 3 | RNVC: 2

7 Mar 2013

5120-14-558-9442
Six Point Tip Screwdriver

145589442
ANXP27X100: RNCC: 3 | RNVC: 2
775578: RNCC: 3 | RNVC: 2
3148517755789: RNCC: 5 | RNVC: 2

24 Nov 2008

5120-14-224-7877

5120-14-566-3240
Hand Hammer

145663240
861D.RPC: RNCC: 3 | RNVC: 2
3148516932815: RNCC: 5 | RNVC: 2
693281: RNCC: 5 | RNVC: 2

5 Nov 2010

5120-14-416-0215
Torque Wrench Adapter

144160215
M4Z6021904602: RNCC: 3 | RNVC: 2

3 Jun 1987

5120-14-276-3164
Socket Wrench Socket

142763164
C1 1-4: RNCC: 3 | RNVC: 2
C-1'1/4: RNCC: 3 | RNVC: 2
K1 1-4: RNCC: 3 | RNVC: 2
K1 1-4: RNCC: 3 | RNVC: 9
3272670293229: RNCC: 5 | RNVC: 2
DEMK1 1-4: RNCC: 5 | RNVC: 9
78C1 1-4: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-241-1523
Cle A Ergots Specia

142411523
0791-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-391-8644
Controle Outillage

143918644
MJF371-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-226-3124
Cle Cannelee Specia

142263124
60290-01-40-010M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-212-9167
Cle Speciale Ouvert

142129167
9970-115-175: RNCC: 3 | RNVC: 2
9970-115-175-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-432-0733
Debloque Rotule

144320733
T.276A: RNCC: 3 | RNVC: 2
3148510655956: RNCC: 5 | RNVC: 2
0065595: RNCC: 5 | RNVC: 9

22 May 1989

5120-14-571-8749
Socket Wrench

145718749
92A.4: RNCC: 3 | RNVC: 2

22 May 2012

5120-14-358-4683
Socket Head Screw Key

143584683
0123330: RNCC: 3 | RNVC: 2
82-050: RNCC: 5 | RNVC: 2
82.050: RNCC: 5 | RNVC: 2

13 Aug 1979

5120-14-444-9305
Kit De Vidange

144449305
ST-2805: RNCC: 3 | RNVC: 9
1035970S00: RNCC: 5 | RNVC: 2
ST-2613: RNCC: 5 | RNVC: 9

29 Jan 1991

5120-14-333-3957
Bloc Pressertissage

143333957
RMPS5F18X1M: RNCC: 3 | RNVC: 2
RMPS5F16X1-8M: RNCC: 5 | RNVC: 2
RMPS4F16-18M: RNCC: 5 | RNVC: 2
85-688-6817: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-430-1070
Spanner Wrench

144301070
6232-54667: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-560-4198
Open End Wrench

145604198
MW1284F00: RNCC: 3 | RNVC: 2
14100096212: RNCC: 5 | RNVC: 2

17 Apr 2009

5120-14-556-3587
Socket Wrench Adapter

145563587
899374: RNCC: 3 | RNVC: 2

27 Feb 2008

5120-14-203-1371

5120-14-220-7890
Open End Wrench

142207890
RACD46: RNCC: 3 | RNVC: 2
RACD46: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-539-0362
Socket Head Screw Key

145390362
NGM0059695033789: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-416-8873
Spanner Wrench

144168873
46AM105: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-543-6053
Open End Wrench

145436053
C04050110: RNCC: 3 | RNVC: 2

24 Nov 2004

5120-14-529-0955
Socket Wrench Ratchet Attachment

145290955
S372C: RNCC: 3 | RNVC: 2

11 Mar 2002

5120-14-551-0680
Open End Wrench

145510680
46AM077: RNCC: 3 | RNVC: 2

27 Aug 2006

5120-14-539-2630
Mechanical Puller Step Plate

145392630
T632G3009222: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-391-6734
Electrical Contact Remover

143916734
R282945: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-478-7216
Screwdriver Bit

144787216
ES.004: RNCC: 3 | RNVC: 2
3148510245836: RNCC: 5 | RNVC: 2
ES004: RNCC: 5 | RNVC: 2
1078914Y00: RNCC: 5 | RNVC: 2
0024583: RNCC: 5 | RNVC: 9

20 Nov 1995

5120-14-509-0525
Module Extracteur

145090525
38018548: RNCC: 3 | RNVC: 2
38018548: RNCC: 3 | RNVC: 2

19 Oct 1998

5120-14-294-6657

Load More Results