What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 82 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 82 of 110

5120-14-256-5826
Open End Wrench

142565826
70-42X46: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-338-4677
Extracteu Couvercle

143384677
PR1-47245: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-443-9839
Wrench Kit

144439839
ST104M929-01: RNCC: 3 | RNVC: 2
ST104M929C: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-373-6741
Mandrin De Montage

143736741
218345: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-479-9343
Lampe Inspection

144799343
12796: RNCC: 3 | RNVC: 9

14 Feb 1996

5120-14-319-3043

5120-14-574-3976
Hand Pipe And Sewer Auger

145743976
290721: RNCC: 3 | RNVC: 2

16 Jan 2013

5120-14-483-1192
Socket Wrench Socket Set

144831192
R.418AU: RNCC: 3 | RNVC: 2
1132066L00: RNCC: 5 | RNVC: 2
R.418AU: RNCC: 5 | RNVC: 2
3148515124624: RNCC: 5 | RNVC: 2
512462: RNCC: 5 | RNVC: 2
R.418U: RNCC: 5 | RNVC: 9
AA011644: RNCC: 6 | RNVC: 9

9 Aug 1996

5120-14-310-3899
Extracteur De Capot

143103899
713710001: RNCC: 3 | RNVC: 2
CMA2-1: RNCC: 5 | RNVC: 2
CMA2-1: RNCC: 5 | RNVC: 2
713710001: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-310-2645

5120-14-520-0016
Socket Head Screw Key

145200016
22367690-1: RNCC: 3 | RNVC: 2

3 May 2000

5120-14-572-9435
Socket Wrench Extension

145729435
S.215S: RNCC: 3 | RNVC: 2
101363: RNCC: 5 | RNVC: 2
91929873: RNCC: 5 | RNVC: 2

30 Aug 2012

5120-14-311-7455
Spanner Wrench

143117455
6800-1050: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-224-8048
Open End Wrench

142248048
18-5-16X9-32-15ET60DEGRES: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-322-5424
Flat Tip Screwdriver

143225424
ABB.5,5X40: RNCC: 3 | RNVC: 2
3148510037509: RNCC: 5 | RNVC: 2
ABB5-5X40: RNCC: 5 | RNVC: 2
91520010: RNCC: 5 | RNVC: 2
0003750: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-404-0321

5120-14-314-4279

5120-14-497-4393
Tournevis

144974393
NO PRIMARY REF14-497-4393: RNCC: 3 | RNVC: 2
FZACD2-5X125: RNCC: 5 | RNVC: 9
F300 0T 023 1808: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-495-0295
Cle

144950295
NO PRIMARY REF14-495-0295: RNCC: 3 | RNVC: 2
22-11-32X7-32: RNCC: 5 | RNVC: 9
F300 0T 018 2418: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-343-9756
Screwdriver Bit

143439756
1739: RNCC: 3 | RNVC: 2
85-100-7640: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-356-5965
Spanner Wrench

143565965
TF10A32505: RNCC: 3 | RNVC: 2
85-688-6566: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-343-9758
Screwdriver Bit

143439758
1741: RNCC: 3 | RNVC: 2
85-100-7644: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-485-8828
Cle Controle Temper

144858828
K7739-12205: RNCC: 3 | RNVC: 2
12205: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-567-2126
Mechanical Puller

145672126
82538329000: RNCC: 3 | RNVC: 2

22 Feb 2011

5120-14-266-7052

5120-14-559-6088
Mechanical Puller

145596088
8812730000: RNCC: 3 | RNVC: 2

2 Feb 2009

5120-14-241-6069
Mandrin De Preserti

142416069
FF8X10N: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-241-6085

5120-14-244-7956
Spanner Wrench

142447956
NO PRIMARY REF14-244-7956: RNCC: 3 | RNVC: 2
40814: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-317-0716
Face Spanner Wrench Socket

143170716
0-79742: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-427-0741
Torque Wrench Adapter

144270741
J.274: RNCC: 3 | RNVC: 2
3148510290935: RNCC: 5 | RNVC: 2
J274: RNCC: 5 | RNVC: 2
0239385E00: RNCC: 5 | RNVC: 2
0029093: RNCC: 5 | RNVC: 9

6 Oct 1988

5120-14-396-7116
Piece Appui

143967116
C46562: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-325-0287
Soupape Plate Cle

143250287
0S20039: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-475-8874
Solid Center Punch

144758874
255.2,5: RNCC: 3 | RNVC: 2
3148511605004: RNCC: 5 | RNVC: 2
18509505-6: RNCC: 5 | RNVC: 2
255-2,5: RNCC: 5 | RNVC: 2
0160500: RNCC: 5 | RNVC: 9

10 May 1995

5120-14-318-6215

5120-14-361-2947
Open End Wrench

143612947
NO PRIMARY REF14-361-2947: RNCC: 3 | RNVC: 2
91352528: RNCC: 5 | RNVC: 2
0102362: RNCC: 5 | RNVC: 2
44-5X7: RNCC: 5 | RNVC: 2
44.5X7: RNCC: 5 | RNVC: 2

24 Jan 1980

5120-14-520-9620
Spanner Wrench

145209620
551830: RNCC: 3 | RNVC: 2
A551830-003: RNCC: 5 | RNVC: 2

26 Jun 2000

5120-14-277-0446
Pliers

142770446
HK1-44: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-365-0185
Socket Wrench Socket

143650185
S.3/4H: RNCC: 3 | RNVC: 2
3148510549606: RNCC: 5 | RNVC: 2
S3-4H: RNCC: 5 | RNVC: 2
0054960: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-352-0841
Outil Control Coupl

143520841
341A93-3130-00: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-443-9740
Open End Wrench

144439740
GS120-04: RNCC: 3 | RNVC: 2

18 Dec 1990

5120-14-558-0415
Cross Tip Screwdriver

145580415
AND1X100: RNCC: 3 | RNVC: 2
91883641: RNCC: 5 | RNVC: 2
FACOM AND1X100: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-298-8377

5120-14-220-8025

5120-14-280-3451

5120-14-468-2286
Spanner Wrench

144682286
EV183-ANNEXE2MONTAGE/A: RNCC: 3 | RNVC: 2

15 Feb 1994

5120-14-576-6328
Mechanical Puller S

145766328
8813685003: RNCC: 3 | RNVC: 2
8813385003: RNCC: 5 | RNVC: 9

2 Jul 2013

5120-14-224-8246
Cle Pour Extraction

142248246
HSS831AHB172: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-443-6343
Ecrou

144436343
NO PRIMARY REF14-443-6343: RNCC: 3 | RNVC: 2
OU142063: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-370-6164
Equipe Vis De Verin

143706164
12-5205-510: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-423-0120

5120-14-272-3710

5120-14-319-8758
Socket Wrench Crowfoot Attachment

143198758
M3-072-50: RNCC: 3 | RNVC: 2
M3-072-50: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-344-3385
Cone De Montage

143443385
D47697: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-422-3272
Barre A Virer Secur

144223272
3-099538-2: RNCC: 3 | RNVC: 2
3-099538-2: RNCC: 5 | RNVC: 9

24 Feb 1988

5120-14-319-4067
Torque Wrench Adapter

143194067
DC5 3-4: RNCC: 3 | RNVC: 2
DC-5-3/4: RNCC: 3 | RNVC: 2
3272670237742: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-533-1449
Detent Handling Tool

145331449
8-0110AA: RNCC: 3 | RNVC: 2
131195: RNCC: 5 | RNVC: 2

23 Jan 2003

5120-14-505-5469
Flat Tip Screwdriver

145055469
ENFD6513-A1-2X8X125X240: RNCC: 3 | RNVC: 2

24 Mar 1998

5120-14-203-1433
Open End Wrench

142031433
NO PRIMARY REF14-203-1433: RNCC: 3 | RNVC: 2
SA79: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-334-8725
Socket Wrench Socket

143348725
STMD10: RNCC: 3 | RNVC: 2
STMD10: RNCC: 5 | RNVC: 2
85-688-4337: RNCC: 6 | RNVC: 9

2 Jun 1976

5120-14-232-9195
Outil Pour Emmanche

142329195
58986: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-516-8063
Poussoir

145168063
5001008872: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-464-9121
Sciage Serre-Joint

144649121
851-930-336-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-335-7360
Spanner Wrench

143357360
NO PRIMARY REF14-335-7360: RNCC: 3 | RNVC: 2
842856-79: RNCC: 5 | RNVC: 9

30 Jun 1976

5120-14-393-4150
Electrical Contact Remover

143934150
8531-118: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-468-4412
Open End Wrench

144684412
N3014BS006REP1: RNCC: 3 | RNVC: 2

2 Mar 1994

5120-14-490-9866
Tenaill

144909866
4399 959 201 316: RNCC: 3 | RNVC: 2
F300 0T 000 8560: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-239-6370

5120-14-528-0702
Socket Wrench Socket

145280702
888-514-800-1: RNCC: 3 | RNVC: 2

12 Dec 2001

5120-14-525-4811
Handling Tool Arm

145254811
K15-975-PGS-050: RNCC: 3 | RNVC: 2

6 Jun 2001

5120-14-329-6331
Socket Wrench Socket

143296331
M31-055: RNCC: 3 | RNVC: 2
M31-055: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-244-4159
Open End Wrench

142444159
35-15X15: RNCC: 3 | RNVC: 2
34.15: RNCC: 3 | RNVC: 2
0182114Y00: RNCC: 5 | RNVC: 2
91381435: RNCC: 5 | RNVC: 2
3148510981505: RNCC: 5 | RNVC: 2
34-15: RNCC: 5 | RNVC: 2
0098150: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-262-9717
Cle Coudee Hexagona

142629717
6800-2108: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-333-3946
Manche De Massette

143333946
960-32-34: RNCC: 3 | RNVC: 2
85-800-4698: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-366-2042
Remontage Outillage

143662042
96-21-21-191-00: RNCC: 3 | RNVC: 2
85-100-5011: RNCC: 6 | RNVC: 9

4 Nov 1980

5120-14-280-2405
Butee Darret

142802405
0229-046-000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-325-5817
Nez Dentrainement

143255817
NO PRIMARY REF14-325-5817: RNCC: 3 | RNVC: 2
222733: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-446-0585
Mandrin

144460585
SV5099: RNCC: 3 | RNVC: 2
5000265099: RNCC: 5 | RNVC: 2
SV5099: RNCC: 5 | RNVC: 9

5 Mar 1991

5120-14-409-0687
Screwdriver Bit

144090687
1039-5: RNCC: 3 | RNVC: 2
815007: RNCC: 5 | RNVC: 2

16 Apr 1986

5120-14-468-0208
Socket Wrench Socket

144680208
7-015145-1: RNCC: 3 | RNVC: 2
7-015145-1: RNCC: 5 | RNVC: 9

8 Feb 1994

5120-14-247-9634
Cle A Douille A Car

142479634
RT20934: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-375-2536
Open End Wrench

143752536
73-115-023: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-404-5226

5120-14-216-1275
Outillage De Sertis

142161275
8820J: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-225-0303

5120-14-413-5354
Reglage Potenti Cle

144135354
150610: RNCC: 3 | RNVC: 2

17 Dec 1986

5120-14-240-0123
Plaque De Soutien

142400123
B0044BB52AREP5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-558-6234
Open End Wrench

145586234
351 119 041 671: RNCC: 3 | RNVC: 2

20 Oct 2008

5120-14-557-7305
Socket Wrench

145577305
MUP 6343: RNCC: 3 | RNVC: 2

7 Jul 2008

5120-14-518-2670
Electrical Contact Inserter And Remover

145182670
NP6811-MP6808: RNCC: 3 | RNVC: 2
NP6811MP6808: RNCC: 5 | RNVC: 9

1 Feb 2000

5120-14-517-4436
Open End Wrench

145174436
GS120-25X28: RNCC: 3 | RNVC: 2
1.70.1022: RNCC: 5 | RNVC: 2

15 Dec 1999

5120-14-536-5290
Combination Box And Open End Wrench

145365290
40R.11/16: RNCC: 3 | RNVC: 2
3148511012048: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-217-3644
Clef Reglage

142173644
NO PRIMARY REF14-217-3644: RNCC: 3 | RNVC: 2
225241: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-427-1492
Socket Head Screw Key

144271492
6252-54297: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-321-1487
Pliers

143211487
11-2: RNCC: 3 | RNVC: 2
2-18: RNCC: 5 | RNVC: 2
85-686-0317: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-429-2194
Ressort Montage

144292194
MGC103-24: RNCC: 3 | RNVC: 2
MGC103-24: RNCC: 5 | RNVC: 2

11 Jan 1989

5120-14-438-7630
Spanner Wrench

144387630
321A95-0020-01: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-270-5787
Cle Speciale

142705787
398-44-03DET32: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-383-0908
Pulverisation Rampe

143830908
9970-123-160: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-429-1466
D'emmanchem Mandrin

144291466
540105: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-371-2223

5120-14-451-8283
Electrical Contact Remover

144518283
39151938: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-304-5719
Freinage Coulisseau

143045719
RT9674-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-399-3392
Face Spanner Wrench Socket

143993392
46AM032: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-272-8636
Communications Equipment Spring Adjuster

142728636
S1107: RNCC: 3 | RNVC: 2
S1107: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-463-2011
Tap And Reamer Wrench

144632011
690-1: RNCC: 3 | RNVC: 2
91741269: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-225-4026

5120-14-382-7072
Axe Extracteur

143827072
6390-121E27-503-50-2: RNCC: 3 | RNVC: 2
6390-121-503-50-2: RNCC: 5 | RNVC: 2

17 Feb 1983

5120-14-220-8200
Open End Wrench

142208200
BB98-38X42: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-383-4668
Electrical Card Extractor

143834668
20198010: RNCC: 3 | RNVC: 2
20198010: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-317-0423
Spanner Wrench

143170423
RT5160: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-409-5139
Bearing And Bushing Inserter And Remover

144095139
8814068000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-245-8556

5120-14-316-6629

5120-14-208-9792

5120-14-467-8745
Hand Armament Subsystem Carrier

144678745
22352454-0: RNCC: 3 | RNVC: 2

31 Jan 1994

5120-14-468-7866
Socket Wrench Socket Set

144687866
S.300-1: RNCC: 3 | RNVC: 2
3148515148545: RNCC: 5 | RNVC: 2
0514854: RNCC: 5 | RNVC: 9

22 Mar 1994

5120-14-272-3641
Open End Wrench

142723641
E74302C7-9WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-247-3177
Bearing And Bushing Remover

142473177
3130S95-60-003: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-416-7449
Montage Outil

144167449
530540: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-556-2763
Detent Handling Tool

145562763
835091: RNCC: 3 | RNVC: 9

19 Feb 2008

144941392
BLC23413: RNCC: 3 | RNVC: 2
F300 0T 015 7116: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-283-0958
Cle De Manoeuvre Po

142830958
A12NAN2257: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-379-7273
Reser Repar Molette

143797273
FD4384: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-236-2369

5120-14-356-1903
Open End Wrench

143561903
187549: RNCC: 3 | RNVC: 2

25 Apr 1979

5120-14-534-3253
Socket Head Screw Key

145343253
NNM0010036234036: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-434-9230
Face Spanner Wrench Socket

144349230
3511 191 46241: RNCC: 3 | RNVC: 2

10 Oct 1989

5120-14-306-4212
Spanner Wrench

143064212
C46018: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-217-9929

5120-14-253-1201

5120-14-040-5486
Hand Terminal Crimping Tool

140405486
69376-2: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-306-4828
Electrical Card Extractor

143064828
488348: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-531-1203
Flat Tip Screwdriver

145311203
AZ.3X100: RNCC: 3 | RNVC: 2
8038708X00: RNCC: 5 | RNVC: 2

24 Jul 2002

5120-14-397-4840
Socket Head Screw Key Blade

143974840
EPS4: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-422-0109
Socket Wrench Extension

144220109
M4Z6021000201: RNCC: 3 | RNVC: 2

16 Feb 1988

5120-14-333-3037
Hand Abrasive Wheel Dresser

143333037
DM1: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-539-3159
Mechanical Puller Body

145393159
T651G3008223: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-544-5240
Electrical Connector Inserter

145445240
9154: RNCC: 3 | RNVC: 2
INFRA+9154: RNCC: 5 | RNVC: 2
AA003329: RNCC: 6 | RNVC: 9

8 Feb 2005

5120-14-254-4820
Pliers

142544820
187-20: RNCC: 3 | RNVC: 2
0000330528: RNCC: 5 | RNVC: 2
0000330528: RNCC: 5 | RNVC: 9
330528: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-425-9353
Mandrin De Guidage

144259353
640414: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-345-0192
Pose Joint Mandrin

143450192
3901475: RNCC: 3 | RNVC: 2

5 Oct 1977

5120-14-564-1440
Seal Inserter

145641440
430821: RNCC: 3 | RNVC: 2

12 Apr 2010

5120-14-379-3635
A Fourch Tournevis

143793635
004325005P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-418-9846
Extracteur

144189846
27393435-8: RNCC: 3 | RNVC: 2

28 Sep 1987

5120-14-331-7382
Spanner Wrench

143317382
330A95-0021-00: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-438-7768
Mechanical Puller Attachment

144387768
330A93-3040-00: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-272-3720

5120-14-539-3928
Connect Cle En Tube

145393928
SP.15823: RNCC: 3 | RNVC: 2
61080671: RNCC: 5 | RNVC: 2
61080671AA: RNCC: 5 | RNVC: 2

13 Jan 2004

5120-14-429-7186
Open End Wrench

144297186
853-190-018-0: RNCC: 3 | RNVC: 2
161819: RNCC: 5 | RNVC: 9

8 Feb 1989

5120-14-365-8061
Leveling-Support Jack

143658061
NO PRIMARY REF14-365-8061: RNCC: 3 | RNVC: 2
40-6-4A5-34: RNCC: 5 | RNVC: 9

8 Oct 1980

5120-14-259-0883
Outil Dalignement

142590883
154-4-003: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-040-5899
Matrice

140405899
48759-1: RNCC: 3 | RNVC: 2
48759: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-428-7140
Socket Wrench Screwdriver Attachment

144287140
0514095: RNCC: 3 | RNVC: 2
3148515140952: RNCC: 5 | RNVC: 2
RT.2-5: RNCC: 5 | RNVC: 2
RT2.5: RNCC: 5 | RNVC: 2
TVA5120-2-263-037-1.1.2: RNCC: 5 | RNVC: 2

13 Dec 1988

5120-14-386-6782
Socket Wrench Crowfoot Attachment

143866782
853-100-067-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-325-4481
Socket Wrench Handle Bar

143254481
99250500124: RNCC: 3 | RNVC: 2
99-250-50-012-4: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-326-0036
Flat Tip Screwdriver

143260036
FRP12: RNCC: 3 | RNVC: 2
85-670-7630: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-043-2204
Lot Outillage Bord

140432204
2-32748-00: RNCC: 3 | RNVC: 2

10 Apr 1984

5120-14-569-8300
Open End Wrench

145698300
148C-840-13: RNCC: 3 | RNVC: 2

24 Oct 2011

5120-14-271-8866
Detent Handling Tool

142718866
8810003071: RNCC: 3 | RNVC: 2
881-0-003-071: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-343-9774
Embout Outil Demont

143439774
0187-027-000: RNCC: 3 | RNVC: 2
85-800-6975: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-514-0201
Open End Wrench

145140201
ENFD29159-32X33: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-406-5696
Montage Outil

144065696
853-200-752-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-299-6422
Douille Sertissage

142996422
FF6X08B: RNCC: 3 | RNVC: 2
0T1589: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-274-1049

5120-14-420-8784
Screwdriver Bit Set And Handle

144208784
16965927: RNCC: 3 | RNVC: 2
16965927: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-313-7209
Face Spanner Wrench Socket

143137209
C46032: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-545-6554
Socket Wrench Socket Set

145456554
R430AP: RNCC: 3 | RNVC: 2

26 Apr 2005

5120-14-370-3464
Flexibles Jeu

143703464
107838: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-363-0028
Spanner Wrench

143630028
213154: RNCC: 3 | RNVC: 2

3 Apr 1980

5120-14-441-1998
Terminal Crimping Tool Contact Positioner

144411998
R073025004: RNCC: 3 | RNVC: 2
91711057: RNCC: 5 | RNVC: 2
73025004: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-043-1157
Socket Wrench Socket Set

140431157
069T50-749176G: RNCC: 3 | RNVC: 2

10 Apr 1984

5120-14-424-6335
Socket Wrench Socket

144246335
8814510000: RNCC: 3 | RNVC: 2

2 Jun 1988

5120-14-429-9394
Screwdriver Bit

144299394
0023942: RNCC: 3 | RNVC: 2
ENT.210: RNCC: 5 | RNVC: 2
ENT210: RNCC: 5 | RNVC: 2

17 Feb 1989

5120-14-402-2892
Socket Wrench Extension

144022892
8815625000: RNCC: 3 | RNVC: 2

2 Jul 1985

5120-14-348-0792
Socket Head Screw Key

143480792
510432: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-223-8178

5120-14-491-6570
Cle

144916570
DT20329: RNCC: 3 | RNVC: 2
F300 0T 003 7730: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-575-8067
Socket Wrench

145758067
TM1029P002: RNCC: 3 | RNVC: 2

3 May 2013

5120-14-352-3149
Support Detau

143523149
MHA335-46: RNCC: 3 | RNVC: 2
MHA335-46: RNCC: 5 | RNVC: 2
MFG360-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-247-9811
Adaptateur Plan Cen

142479811
160-71960-21: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-446-7871
Cle A Douil Douille

5120-14-409-7096
Outil A Sertir

5120-14-550-2465
Splicing Sleeve Compressing Tool

145502465
MZ-V: RNCC: 3 | RNVC: 2

13 Jun 2006

5120-14-446-7856
Cle A Douil Douille

5120-14-214-4137
Cle A Ergots Specia

142144137
09-201: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-031-6861

5120-14-041-3117
Torque Wrench Adapter

140413117
D-32: RNCC: 3 | RNVC: 2
3272670302853: RNCC: 5 | RNVC: 2
D32: RNCC: 5 | RNVC: 2
D32F0P: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-200-1404
Spanner Wrench

142001404
8810246000: RNCC: 3 | RNVC: 2
6-12-187-0: RNCC: 5 | RNVC: 2
881-0-246-000: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-276-3147
Socket Wrench Socket

142763147
K46: RNCC: 3 | RNVC: 2
C-46: RNCC: 3 | RNVC: 2
C46: RNCC: 3 | RNVC: 2
K46: RNCC: 3 | RNVC: 2
3272670261389: RNCC: 5 | RNVC: 2
M4ZS560D6060: RNCC: 5 | RNVC: 2
DEMK46: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-346-8752
Electrical Card Extractor

143468752
5702-1-213: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-443-8027
Flasque Darret

144438027
D12502-040-01: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-557-6289
Socket Head Screw Key

145576289
65-14: RNCC: 3 | RNVC: 2

1 Jul 2008

5120-14-220-8540
Cle Reglable Specia

142208540
PR46487: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-368-9291
Guide Joint

143689291
MUP5352: RNCC: 3 | RNVC: 2

10 Mar 1981

5120-14-226-3718

5120-14-244-4060
Open End Wrench

142444060
10-4X6-P: RNCC: 3 | RNVC: 2
10-4X6P: RNCC: 5 | RNVC: 2
3272670252882: RNCC: 5 | RNVC: 2
10-4X6: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-309-3925
Rotating Members Aligning Tool

143093925
NO PRIMARY REF14-309-3925: RNCC: 3 | RNVC: 2
TC5B2-1: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-423-2286
Basculeur Cle Dyn

144232286
0747164: RNCC: 3 | RNVC: 2
SP.1735 D-3-1130: RNCC: 5 | RNVC: 2
SP1735D-3-1130: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-435-7581
Outil Maintenance B

144357581
RP658263: RNCC: 3 | RNVC: 2
0882500K00: RNCC: 5 | RNVC: 2

22 Nov 1989

5120-14-251-1129
Cle A Ergot

142511129
202412: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-249-9421
Socket Wrench Socket

142499421
0028010: RNCC: 3 | RNVC: 2
J.9L: RNCC: 5 | RNVC: 2
J9L: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-490-6858
Drill

144906858
240 D 01027 000: RNCC: 3 | RNVC: 2
F300 0T 000 0962: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-274-3578
Flat Tip Screwdriver

142743578
7267: RNCC: 3 | RNVC: 2
7267: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-541-3266
Blacksmith's Anvil

145413266
4902-02: RNCC: 3 | RNVC: 2

27 May 2004

5120-14-253-4999
Bras Tendeur A Cabl

142534999
5003-19: RNCC: 3 | RNVC: 2
T2151040: RNCC: 5 | RNVC: 2
5003-19: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-510-1379
Denudeur Thermique

145101379
PB19: RNCC: 3 | RNVC: 2
5120AA8011101: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-563-8865
Flat Tip And Cross Tip Screwdriver Set

145638865
MOD.ANXR: RNCC: 3 | RNVC: 2
793549: RNCC: 5 | RNVC: 2

24 Mar 2010

5120-14-419-2627
Bride Darret Ecrou

144192627
530659: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-373-7829

5120-14-031-7530

5120-14-228-5629

5120-14-413-7822
Mont Segments Outil

144137822
82407396: RNCC: 3 | RNVC: 2

15 Jan 1987

5120-14-214-6062

5120-14-423-2828
Tap And Reamer Wrench

144232828
N2: RNCC: 3 | RNVC: 2
91626063: RNCC: 5 | RNVC: 2

14 Apr 1988

5120-14-463-3119
Torque Wrench Adapter

144633119
0UT75A: RNCC: 3 | RNVC: 2
OUT75A: RNCC: 5 | RNVC: 2
1060217X00: RNCC: 5 | RNVC: 2

9 Jun 1993

5120-14-371-9724
Bearing And Bushing Inserter And Remover

143719724
8813177000: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-371-9744
Adapt Pion Manchon

143719744
8813215000: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-267-4809
Wood Mallet

142674809
MAILLETAFRAPPER DIAM.80MM: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-268-1403
Broche Dequilibrage

142681403
PR46712: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-236-2617

5120-14-273-7533

5120-14-463-3302
Calage Pompe Outil

144633302
0000107900: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-565-4037
Trowel

145654037
050000: RNCC: 3 | RNVC: 2

16 Aug 2010

5120-14-201-6875
Stud Inserter And Remover

142016875
CA1-2-220UK: RNCC: 3 | RNVC: 2
567T6-12: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-438-5044
Face Spanner Wrench Socket

144385044
F47276: RNCC: 3 | RNVC: 2
85-693-9777: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-361-7793
Open End Wrench

143617793
M31-121: RNCC: 3 | RNVC: 2
M31121: RNCC: 5 | RNVC: 2
M31-121: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-14-427-6943
Flat Tip Screwdriver

144276943
NO PRIMARY REF14-427-6943: RNCC: 3 | RNVC: 2
540750: RNCC: 5 | RNVC: 9

4 Nov 1988

5120-14-555-9981
Electrical Connector Inserter

145559981
279M051-00: RNCC: 3 | RNVC: 2

21 Jan 2008

5120-14-424-5691
Socket Wrench Socket

144245691
0055885: RNCC: 3 | RNVC: 2
S-1"3/16L: RNCC: 5 | RNVC: 2
S.1"3/16L: RNCC: 5 | RNVC: 2

31 May 1988

5120-14-325-3192
Socket Wrench Crowfoot Attachment

143253192
1950Z2 5-16IN: RNCC: 3 | RNVC: 2
1950Z2 5-16IN: RNCC: 5 | RNVC: 1
85-581-4375: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-406-6576
Demontage Guide

144066576
853-200-853-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-232-2215
Socket Wrench Handle

142322215
J-150: RNCC: 3 | RNVC: 2
J150: RNCC: 3 | RNVC: 2
UKA: RNCC: 3 | RNVC: 2
J151: RNCC: 3 | RNVC: 9
3272670216877: RNCC: 5 | RNVC: 2
74J150: RNCC: 5 | RNVC: 9
DEMJ151: RNCC: 5 | RNVC: 9
85-679-5930: RNCC: 6 | RNVC: 9

1 Jan 1967

5120-14-340-7083
Oeillet Jeu De Pose

143407083
NO PRIMARY REF14-340-7083: RNCC: 3 | RNVC: 2
CERCL03JEUDEP0SE: RNCC: 5 | RNVC: 9
3CERCL0JEUDEP0SE: RNCC: 5 | RNVC: 9
85-684-1900: RNCC: 6 | RNVC: 9

14 Feb 1977

5120-14-271-8601
Extracteur Special

142718601
NO PRIMARY REF14-271-8601: RNCC: 3 | RNVC: 2
280544: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-328-1568
Open End Wrench

143281568
NO PRIMARY REF14-328-1568: RNCC: 3 | RNVC: 2
CLEAF0URCHE: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-222-7161
Open End Wrench

142227161
16 13-32X1-2IN: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-385-3338
Montag Platea Guide

143853338
365A93-3113-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-316-5525
Open End Wrench

143165525
321A95-0048-00: RNCC: 3 | RNVC: 2
321-95-0048-00: RNCC: 5 | RNVC: 2
08-440: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-313-8802
Spanner Wrench

143138802
M2-069: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-411-6306
Arb Maint Outillage

144116306
227500: RNCC: 3 | RNVC: 2

27 Aug 1986

5120-14-545-9771
Leveling-Support Jack

145459771
8901007339: RNCC: 3 | RNVC: 2

1 Jun 2005

5120-14-552-6731
Socket Wrench Socket

145526731
STX.24: RNCC: 3 | RNVC: 2
STX.24: RNCC: 5 | RNVC: 2
3148510591940: RNCC: 5 | RNVC: 2

23 Jan 2007

5120-14-415-8980
Blocage Outil

144158980
4827: RNCC: 3 | RNVC: 2

26 May 1987

5120-14-428-5265
Porte-Outil Semelle

144285265
MJK3912101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-557-4724
Torque Wrench

145574724
J.306A100: RNCC: 3 | RNVC: 2

12 Jun 2008

5120-14-394-4968
Bloc De Sertissage

143944968
RMPS6F18X1-6M: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-272-3719

5120-14-272-3757

5120-14-240-4785

5120-14-391-8585
Outil De Positionne

143918585
70359738: RNCC: 3 | RNVC: 2
70359738: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-248-3529
Cone De Dilatation

142483529
0M143750V1-4B: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-490-8806
Aiguill

144908806
4066 213 400 400: RNCC: 3 | RNVC: 2
F300 0T 000 5078: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-416-7548
Centrage Bague

144167548
537391: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-342-3416

5120-14-340-6483
Combination Box And Open End Wrench

143406483
40.1'7/16L: RNCC: 3 | RNVC: 2
40 1 7/16L: RNCC: 5 | RNVC: 2
3148511012406: RNCC: 5 | RNVC: 2
40-1 7-16: RNCC: 5 | RNVC: 9
0101240: RNCC: 5 | RNVC: 9

14 Feb 1977

5120-14-300-9512
Corps De Verin

143009512
341A91-0056-29: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-460-3787
Couteau De Declench

144603787
701-1546: RNCC: 3 | RNVC: 2
12568: RNCC: 5 | RNVC: 2
85-694-3410: RNCC: 6 | RNVC: 9

21 Jan 1993

5120-14-487-6640
Spanner Wrench

144876640
8969-71500: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-369-3053

5120-14-287-4816
Cle Isolante

142874816
12502703: RNCC: 3 | RNVC: 2
12502703: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-483-8698
Spanner Wrench

144838698
0-704557-1: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-489-4889
Socket Wrench Socket

144894889
R.14F: RNCC: 3 | RNVC: 2
R14F: RNCC: 5 | RNVC: 2
3148510511184: RNCC: 5 | RNVC: 2
0051118: RNCC: 5 | RNVC: 9
AC85321: RNCC: 5 | RNVC: 9
F300 0T 023 6297: RNCC: 6 | RNVC: 9

23 Jul 1997

5120-14-249-0705
Cle A Douille

142490705
0851666200: RNCC: 3 | RNVC: 2
C0P41VIL1291: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-490-8971
Porte F

144908971
4067 850 002 103: RNCC: 3 | RNVC: 2
F300 0T 000 5263: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-438-4983
Torque Wrench Adapter

144384983
MHB534-25: RNCC: 3 | RNVC: 2
85-694-2852: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-252-2765

5120-14-244-4138
Socket Wrench Socket

142444138
J.15: RNCC: 3 | RNVC: 2
J15: RNCC: 3 | RNVC: 2
J-15: RNCC: 3 | RNVC: 2
J15: RNCC: 5 | RNVC: 2
0110975T00: RNCC: 5 | RNVC: 2
3272670282308: RNCC: 5 | RNVC: 2
3148510271903: RNCC: 5 | RNVC: 2
0027190: RNCC: 5 | RNVC: 9
74J15: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-377-2789
Spanner Wrench

143772789
TMY20-32-509: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-558-0423
Flat Tip Screwdriver

145580423
ANF8X200: RNCC: 3 | RNVC: 2
3148517732063: RNCC: 5 | RNVC: 2
91883648: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-440-2912
Mechanical Puller Attachment

144402912
5000261220: RNCC: 3 | RNVC: 2
89409870: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-534-9610
Outil D'installatio

145349610
5267: RNCC: 3 | RNVC: 2
UX030273: RNCC: 6 | RNVC: 9

23 Apr 2003

5120-14-557-6879
Hand Hydraulic Jack

145576879
JH-6: RNCC: 3 | RNVC: 2
JH-6: RNCC: 5 | RNVC: 2
91882645: RNCC: 5 | RNVC: 2

3 Jul 2008

5120-14-489-3936
Deflecteur

144893936
TMY2071006G01: RNCC: 3 | RNVC: 2
TMY20-71-006G01: RNCC: 5 | RNVC: 2

16 Jul 1997

5120-14-343-7054
Open End Wrench

143437054
NO PRIMARY REF14-343-7054: RNCC: 3 | RNVC: 2
13X14: RNCC: 5 | RNVC: 2
44-13X14: RNCC: 5 | RNVC: 2
813202: RNCC: 5 | RNVC: 2
479929M: RNCC: 5 | RNVC: 2
91355353: RNCC: 5 | RNVC: 2

13 Jul 1977

5120-14-391-7056
Mesure Outillage

143917056
MMJ059-05: RNCC: 3 | RNVC: 2
MMJ059-05: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-411-2137
Cle Speciale

144112137
4A670-21W26H9: RNCC: 3 | RNVC: 2
4A-670-21-W26H9: RNCC: 5 | RNVC: 2
85-691-9435: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-352-0845
Mechanical Puller Attachment

143520845
341A93-3135-10: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-517-3907
Bearing And Bushing Remover

145173907
0XB501-252-706-23: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-216-2043
Open End Wrench

142162043
RT2733: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-463-5607
Spanner Wrench

144635607
45057908: RNCC: 3 | RNVC: 2
45057908: RNCC: 5 | RNVC: 9

17 Jun 1993

5120-14-375-8039
Spanner Wrench

143758039
300A94968: RNCC: 3 | RNVC: 2
91371614: RNCC: 5 | RNVC: 2
300A94968: RNCC: 5 | RNVC: 2
300A94968: RNCC: 5 | RNVC: 9
300A94968: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-220-8030

5120-14-254-4921

5120-14-381-5244
Silentbloc Outil

143815244
1950000T: RNCC: 3 | RNVC: 2
B251635: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-204-9117

5120-14-381-9594
Support De Mo Outil

143819594
46MS014: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-239-8159

5120-14-262-8143
Matoir A Gorge

142628143
13-36AG0RGE: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-223-5354
Cle Pour Ecrou A En

142235354
044BBC4BBF4AREP9DECALEE30DEGRES: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-508-8995
Socket Wrench Ratchet Attachment

145088995
S.383: RNCC: 3 | RNVC: 2
S-383: RNCC: 5 | RNVC: 2

7 Oct 1998

5120-14-237-2539
Cle A Embout Carre

142372539
NO PRIMARY REF14-237-2539: RNCC: 3 | RNVC: 2
MACBFSCF315-3: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-501-0313
Socket Wrench Socket

145010313
K.34HA: RNCC: 3 | RNVC: 2
3148510300214: RNCC: 5 | RNVC: 2
K-34HA: RNCC: 5 | RNVC: 2
K34HA: RNCC: 5 | RNVC: 2
0030021: RNCC: 5 | RNVC: 9
F300 0T 025 0612: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-255-4208
Socket Wrench Handle

142554208
M3036-1: RNCC: 3 | RNVC: 2
M3-036-1: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-421-5254
Couronne Montage Ax

144215254
8811690000: RNCC: 3 | RNVC: 2

18 Jan 1988

5120-14-286-0133

5120-14-386-1609
Bearing And Bushing Inserter

143861609
6801P33-6125-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-517-6530
Socket Wrench Socket

145176530
9403L0S101-0001: RNCC: 3 | RNVC: 2

5 Jan 2000

5120-14-200-9325
Socket Wrench Socket

142009325
S.19/32: RNCC: 3 | RNVC: 2
3148510543802: RNCC: 5 | RNVC: 2
S19-32: RNCC: 5 | RNVC: 2
0054380: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-286-2241
Open End Wrench

142862241
20.24: RNCC: 3 | RNVC: 2
3148510936406: RNCC: 5 | RNVC: 2
20-24: RNCC: 5 | RNVC: 2
0093640: RNCC: 5 | RNVC: 9
AA019196: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-388-0628
Calibree Broche

143880628
136-01B25114: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-329-6332
Spanner Wrench

143296332
M31-056: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-416-7508
Carter Support

144167508
537271: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-459-1625
Bearing Staking Installation Tool

144591625
45056297: RNCC: 3 | RNVC: 2
45056297: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-250-0301
Open End Wrench

142500301
C55412: RNCC: 3 | RNVC: 2
100861: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-250-0114
Spanner Wrench

142500114
B02207: RNCC: 3 | RNVC: 2
0000330443: RNCC: 5 | RNVC: 2
0000330443: RNCC: 5 | RNVC: 9
330443: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-381-5979

5120-14-305-8131

5120-14-200-9321
Socket Wrench Socket

142009321
S.3/8: RNCC: 3 | RNVC: 2
3148510543000: RNCC: 5 | RNVC: 2
S3-8: RNCC: 5 | RNVC: 2
0054300: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-383-5143
Electrical Card Extractor

143835143
16928998: RNCC: 3 | RNVC: 2
16928998: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-384-6325
Electrical Card Extractor

143846325
16928942: RNCC: 3 | RNVC: 2
16928942: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-532-3255
Socket Wrench Socket

145323255
SJ.5/8: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-332-3823
Face Spanner Wrench Socket

143323823
M31-018: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-386-1632
Bearing And Bushing Inserter

143861632
6802J33-4050-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-284-9933
Retaining Ring Pliers

142849933
0141240: RNCC: 3 | RNVC: 2
179-23: RNCC: 5 | RNVC: 2
179.23: RNCC: 5 | RNVC: 2
0714 02 52: RNCC: 5 | RNVC: 2
101530: RNCC: 5 | RNVC: 2
0U135924: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-285-5970
Face Spanner Wrench Socket

142855970
102: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-523-9998
Cross Tip Screwdriver Set

145239998
AZD.JS5: RNCC: 3 | RNVC: 2
AZD JS5: RNCC: 5 | RNVC: 2
3148515007248: RNCC: 5 | RNVC: 2

20 Feb 2001

5120-14-317-7887
Spanner Wrench

143177887
RT5838: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-430-3068
Spanner Wrench Handle

144303068
20196331: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-417-1176
Mattock

144171176
205922: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-270-8690
Socket Head Screw Key

142708690
201991: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-293-7148
Electrical Card Extractor

142937148
988804: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-471-0451
Hole Sheet Metal Holder

144710451
CB6-3-2: RNCC: 3 | RNVC: 2
CB6-3-2: RNCC: 3 | RNVC: 2
F3300632: RNCC: 5 | RNVC: 2

20 Jul 1994

5120-14-343-1815
Screw Thread Insert Inserter

143431815
01500230500: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-291-3032
Bearing And Bushing Inserter And Remover

142913032
174808: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-040-5082
Hand Terminal Crimping Tool

140405082
2074PS: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-207-4936

5120-14-563-7754
Socket Wrench

145637754
92A.30: RNCC: 3 | RNVC: 2
3148516631466: RNCC: 5 | RNVC: 2
0663146: RNCC: 5 | RNVC: 2

12 Mar 2010

5120-14-427-1110
Mandrin Presse

144271110
547879: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-215-2259
Cle Speciale

142152259
RT2880: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-239-8854
Rallonge Pour Chass

142398854
B032BB8REP16: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-412-4262
Spanner Wrench

144124262
BAZ51343: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-385-3351
Spanner Wrench

143853351
365A93-3240-21: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-449-2346
Socket Head Screw Key Set

144492346
59-00-16: RNCC: 3 | RNVC: 2

7 Aug 1991

5120-14-552-7661
Screwdriver Bit

145527661
AMZ.X10-15: RNCC: 3 | RNVC: 2
AMZ.X10-15: RNCC: 5 | RNVC: 2
3148510087856: RNCC: 5 | RNVC: 2

30 Jan 2007

5120-14-471-5231
Corps

144715231
NO PRIMARY REF14-471-5231: RNCC: 3 | RNVC: 2
89280917: RNCC: 5 | RNVC: 2
300BA98864-1: RNCC: 5 | RNVC: 9
300BA98864-1: RNCC: 5 | RNVC: 9

31 Aug 1994

5120-14-513-7367
Flat Tip Screwdriver

145137367
ENFD6561-1X5-5X125: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-304-3119
Cone De Montage

143043119
C46843: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-228-5122

5120-14-234-3319

5120-14-495-1288
Marteau

144951288
0002500301: RNCC: 3 | RNVC: 2
25003: RNCC: 3 | RNVC: 2
F300 0T 018 4101: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-478-5842
Montage Cone

144785842
100-564: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-242-2866
Open End Wrench

142422866
35 13-64X13-64: RNCC: 3 | RNVC: 2
12AG13-64: RNCC: 5 | RNVC: 9
85-686-0394: RNCC: 6 | RNVC: 9

1 Jan 1967

5120-14-513-4340
Socket Head Screw Key

145134340
NO PRIMARY REF14-513-4340: RNCC: 3 | RNVC: 2
NNP 5120860703214: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-457-3003
Socket Head Screw Key

144573003
0126930: RNCC: 3 | RNVC: 2
89.T20: RNCC: 3 | RNVC: 2
66-P20: RNCC: 3 | RNVC: 2
66P20: RNCC: 3 | RNVC: 2
3272670254749: RNCC: 5 | RNVC: 2

25 Aug 1992

5120-14-399-1596
Pliers

143991596
237-16-CP: RNCC: 3 | RNVC: 2
237-16CP: RNCC: 3 | RNVC: 2
3272670300262: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-570-9655
Socket Wrench Set

145709655
66A.JU3: RNCC: 3 | RNVC: 2
3148516636645: RNCC: 5 | RNVC: 2
663664: RNCC: 5 | RNVC: 2

8 Feb 2012

5120-14-557-9050
Torque Wrench

145579050
61155901AA: RNCC: 3 | RNVC: 2

29 Jul 2008

5120-14-525-9103
Outil Applicateur

145259103
14091: RNCC: 3 | RNVC: 2
1124631C00: RNCC: 5 | RNVC: 2

20 Jun 2001

5120-14-271-8364

5120-14-283-9734

5120-14-322-7489
Appareil Enfoncemen

143227489
NO PRIMARY REF14-322-7489: RNCC: 3 | RNVC: 2
4506280: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-414-2780
Presse-Equerre

144142780
NO PRIMARY REF14-414-2780: RNCC: 3 | RNVC: 2
56 A9: RNCC: 5 | RNVC: 2

28 Jan 1987

5120-14-385-3137
Spanner Wrench

143853137
360A93-3301-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-413-6426
Cle De Verouillage

144136426
80-300790: RNCC: 3 | RNVC: 2

12 Jan 1987

5120-14-338-4718
Tournevis De Reglag

143384718
C46141-3: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-552-7865
Pliers

145527865
188.20VE: RNCC: 3 | RNVC: 2
188.20VE: RNCC: 5 | RNVC: 2
3148516418616: RNCC: 5 | RNVC: 2

31 Jan 2007

5120-14-220-7889
Open End Wrench

142207889
RACD42: RNCC: 3 | RNVC: 2
RACD42: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-295-1678
Screw Thread Insert Inserter

142951678
01500412000: RNCC: 3 | RNVC: 2
01500412060: RNCC: 5 | RNVC: 2
32241260: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-369-6672
Hand Terminal Crimping Tool

143696672
20052: RNCC: 3 | RNVC: 2
20052: RNCC: 5 | RNVC: 2
43988: RNCC: 5 | RNVC: 2
20052: RNCC: 5 | RNVC: 9

17 Apr 1981

5120-14-348-4427
Spanner Wrench

143484427
GSM084-008F12: RNCC: 3 | RNVC: 2
GSM084-08F12: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-259-6284
Plaque De Fixation

142596284
20516A: RNCC: 3 | RNVC: 2
40677-15: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-433-6328
Socket Head Screw Key Set

144336328
6269-59030: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-203-1374
Grommet Inserting Punch And Die

142031374
NO PRIMARY REF14-203-1374: RNCC: 3 | RNVC: 2
JEUP0SE0EILLET11: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-221-8237

5120-14-241-0262

5120-14-543-5181
Shock Type Wheel Stud Nut Wrench

145435181
Q3144482: RNCC: 3 | RNVC: 2

17 Nov 2004

5120-14-266-8076

5120-14-504-6592
Wire Twister Pliers

145046592
445.8R: RNCC: 3 | RNVC: 2
3148511764411: RNCC: 5 | RNVC: 2
0176441: RNCC: 5 | RNVC: 9

25 Feb 1998

5120-14-523-4598

5120-14-406-3908
Bouton-Pous Extract

144063908
29566320: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-372-7637
Bearing Staking Installation Tool

143727637
3180S95-33-065: RNCC: 3 | RNVC: 2
3180-95-33-065: RNCC: 5 | RNVC: 2

21 Sep 1981

5120-14-212-9134
Douille Speciale Ou

142129134
9970-115-042: RNCC: 3 | RNVC: 2
9970-115-042-00: RNCC: 3 | RNVC: 2
CF6: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-409-3092
Outil Serrag Goujon

144093092
DLP753440: RNCC: 3 | RNVC: 2

27 May 1986

5120-14-416-7547
Butee Cale

144167547
537390: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-248-1179

5120-14-285-5955

5120-14-304-3137
Cone Mise En Forme

143043137
S16-0605-0391: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-569-5736
Spatula

145695736
RS-FS-0010: RNCC: 3 | RNVC: 2

28 Sep 2011

5120-14-398-3015
De Montage Outil

143983015
704321-01: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-567-8174
Hand Beading Tool

145678174
EQT00-11: RNCC: 3 | RNVC: 2

13 Apr 2011

5120-14-347-5004
Compte-Tours Outil

143475004
16561503: RNCC: 3 | RNVC: 2
16561503: RNCC: 3 | RNVC: 9

1 Mar 1978

5120-14-486-2850
Bague Manchon

144862850
F117153: RNCC: 3 | RNVC: 2

10 Mar 1997

5120-14-439-5773
Cle Guide

144395773
NO PRIMARY REF14-439-5773: RNCC: 3 | RNVC: 2
0U144567: RNCC: 5 | RNVC: 9

15 May 1990

5120-14-261-5279
Tete Cle A Fourche

142615279
D11: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-572-0719
Socket Wrench Set

145720719
S.420B: RNCC: 3 | RNVC: 2

5 Jun 2012

5120-14-516-7970
Cle A Creneaux

145167970
5000261554: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-380-8374
Rondelle Dappui

143808374
C46001: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-425-5986
Screwdriver Bit

144255986
ES.103: RNCC: 3 | RNVC: 2
ES.103: RNCC: 5 | RNVC: 2
3148510245911: RNCC: 5 | RNVC: 2
1029301S00: RNCC: 5 | RNVC: 2
162-5947: RNCC: 5 | RNVC: 2
0614 177 967: RNCC: 5 | RNVC: 2
0024591: RNCC: 5 | RNVC: 9
FACOMES.103: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-422-8887
Sangle Mtge Piston

144228887
90890-05188: RNCC: 3 | RNVC: 2

24 Mar 1988

5120-14-313-4684
Rallonge Verrouilla

143134684
WA.1124: RNCC: 3 | RNVC: 2
3148510789606: RNCC: 5 | RNVC: 2
WA1124: RNCC: 5 | RNVC: 2
0078960: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-281-2961
Cle A Fourche Ecrou

142812961
C46824: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-208-7292

5120-14-260-2330

5120-14-362-1729

5120-14-214-7730
Socket Wrench Crowfoot Attachment

142147730
17-9-43: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-539-4404
Socket Wrench Handle

145394404
S.145: RNCC: 3 | RNVC: 2
3148510567457: RNCC: 5 | RNVC: 2

14 Jan 2004

5120-14-212-9087
Emmanche-Joint Tori

142129087
9970-115-188: RNCC: 3 | RNVC: 2
9970-115-188-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-309-7441
Retaining Ring Installation Tool

143097441
341A93-3524-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-386-7607

5120-14-341-1282
Agrafe Demont Outil

143411282
002500050P: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-238-5443

5120-14-490-8884
Filiere

144908884
4067 170 000 410: RNCC: 3 | RNVC: 2
F300 0T 000 5156: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-577-3141
Drift

145773141
07KS0103: RNCC: 3 | RNVC: 2

5 Sep 2013

5120-14-371-5996
Regle De Centrage

143715996
160-882010: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-232-3109

5120-14-441-0394
Corps De Platine

144410394
TB2020202E: RNCC: 3 | RNVC: 2

16 Aug 1990

5120-14-355-4015
Electronic Equipment Alignment Tool

143554015
16490061: RNCC: 3 | RNVC: 2
16490061-3: RNCC: 5 | RNVC: 2

19 Mar 1979

5120-14-378-5563
Spanner Wrench

143785563
6801P32-1062-20: RNCC: 3 | RNVC: 2
6801365A32-1062-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-312-3273
Outil Reglage Butee

143123273
EA1-1M4: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-360-0553
Cle Element Pyr0tec

143600553
053W54-542456G: RNCC: 3 | RNVC: 2
053W54-542456G: RNCC: 3 | RNVC: 2
053W54-542456G: RNCC: 5 | RNVC: 2
0542456G00: RNCC: 5 | RNVC: 2
538102: RNCC: 5 | RNVC: 2
053W54-542456G: RNCC: 5 | RNVC: 9

31 Oct 1979

5120-14-262-3133
Outil Maintien Pris

142623133
NO PRIMARY REF14-262-3133: RNCC: 3 | RNVC: 2
175153: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-466-7581
Spanner Wrench

144667581
708954-00: RNCC: 3 | RNVC: 2
89297241: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-527-1286
Open End Wrench

145271286
45-85: RNCC: 3 | RNVC: 2
45.85: RNCC: 5 | RNVC: 2

4 Oct 2001

5120-14-031-9654
Screwdriver Bit Holder

140319654
M31-110: RNCC: 3 | RNVC: 2
M31-110: RNCC: 5 | RNVC: 9

5 Jul 1980

5120-14-471-9161
Outillage Surbau

144719161
MAT262-0120: RNCC: 3 | RNVC: 2

27 Sep 1994

5120-14-293-7557

5120-14-237-1246
Socket Wrench Screwdriver Attachment

142371246
RP.1: RNCC: 3 | RNVC: 2
3148515136009: RNCC: 5 | RNVC: 2
RP1: RNCC: 5 | RNVC: 2
91623403: RNCC: 5 | RNVC: 2
0513600: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-388-7405
Outill Verrou Frein

143887405
8814303000: RNCC: 3 | RNVC: 2

3 Nov 1983

5120-14-416-7470
Montage Outil

144167470
536884: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-372-2152
Pince A Sertir Stop

143722152
304113: RNCC: 3 | RNVC: 2

1 Sep 1981

5120-14-467-8119
Hand Tube Swaging Tool Kit

144678119
P12108C06-26A00: RNCC: 3 | RNVC: 2

27 Jan 1994

5120-14-354-8665
Open End Wrench

143548665
187556: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-387-8648
Reglage Rotule Cle

143878648
OU50417: RNCC: 3 | RNVC: 2
50417: RNCC: 3 | RNVC: 2
0U50417: RNCC: 5 | RNVC: 2
50417: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-463-7152
Bearing And Bushing Remover

144637152
45057949: RNCC: 3 | RNVC: 2
45057949: RNCC: 5 | RNVC: 9

23 Jun 1993

5120-14-501-7746
Bearing And Bushing Inserter And Remover

145017746
1X56 137 235: RNCC: 3 | RNVC: 2
1X56 137 235: RNCC: 5 | RNVC: 2

7 Nov 1997

5120-14-260-3509
Faux Mors

142603509
PR47697: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-227-3134
Tige Filetee Avec E

142273134
422961REP686ET687: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-201-0112

5120-14-248-3532

5120-14-389-6815
Plastiqu Ecouvillon

143896815
1135548: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-212-8320

5120-14-349-3870
Ecrous Denteles Cle

143493870
9970-115-555: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-424-8785
Spanner Wrench

144248785
851-200-018-0: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-442-1517
Serre Toles Outil

144421517
853-600-249-6: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-558-4135
Mechanical Puller

145584135
888-514-100-1: RNCC: 3 | RNVC: 2

1 Oct 2008

5120-14-274-8649
Pince-Joint

142748649
R31674-7-18REP4BIS: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-276-3096
Socket Wrench Socket

142763096
0032100: RNCC: 3 | RNVC: 2
M-2'1/8: RNCC: 3 | RNVC: 2
M2 1-8: RNCC: 3 | RNVC: 2
M2 1-8: RNCC: 5 | RNVC: 2
M2P0UCES1-8: RNCC: 5 | RNVC: 2
3272670265660: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-274-5173
Arrache-Boit Roulem

142745173
0-62193: RNCC: 3 | RNVC: 2
062-193: RNCC: 5 | RNVC: 2
062193: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-312-4056
Electrical Card Extractor

143124056
NO PRIMARY REF14-312-4056: RNCC: 3 | RNVC: 2
19277458: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-491-6328
Cliquet

144916328
MT01-02-11: RNCC: 3 | RNVC: 2
F300 0T 003 7195: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-226-3132
Outil Montage Ronde

142263132
60290-01-43-060M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-215-2408
Cle Speciale

142152408
PR46486: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-281-1780
Socket Wrench Adapter

142811780
154897: RNCC: 3 | RNVC: 2
105556: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-469-8602
Socket Head Screw Key Set

144698602
62-TR8A: RNCC: 3 | RNVC: 2
62TR8A: RNCC: 3 | RNVC: 2
3272670253810: RNCC: 5 | RNVC: 2

16 May 1994

5120-14-422-2429
Tas Support Carter

144222429
0377-54724: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-209-4202
Offset Screwdriver

142094202
224-1: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-422-8384
Outillage Specialis

144228384
2901-330A11-1200-02: RNCC: 3 | RNVC: 2

22 Mar 1988

5120-14-222-7118

5120-14-292-8293

5120-14-285-0370

5120-14-351-9466
Pose Mandrin Access

143519466
07949-6110000: RNCC: 3 | RNVC: 2
07949-6110000: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-501-7749
Bearing And Bushing Inserter And Remover

145017749
1X56 136 442: RNCC: 3 | RNVC: 2
1X56 136 442: RNCC: 5 | RNVC: 2

7 Nov 1997

5120-14-343-1834
Pose Filet R Broche

143431834
01500614420: RNCC: 3 | RNVC: 2
01556144010: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-353-2535
Outil A Preformer

143532535
19417731: RNCC: 3 | RNVC: 2
19417731: RNCC: 5 | RNVC: 9

8 Dec 1978

5120-14-422-5393
Plaque Repoussage

144225393
4-109-9329: RNCC: 3 | RNVC: 2

9 Mar 1988

5120-14-340-3942
Hand Terminal Crimping Tool

143403942
220066-1: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-393-4130
Socket Head Screw Key

143934130
85-072: RNCC: 3 | RNVC: 2
3148511257807: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-390-3204
Retaining Ring Pliers

143903204
01-90900-064: RNCC: 3 | RNVC: 2
01-90-900-064: RNCC: 5 | RNVC: 2
85-692-4862: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-317-0449
Pince De Bridage

143170449
NO PRIMARY REF14-317-0449: RNCC: 3 | RNVC: 2
RT5399: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-248-5232
Cle Speciale Turbin

142485232
NO PRIMARY REF14-248-5232: RNCC: 3 | RNVC: 2
341068: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-292-8540

5120-14-475-8870
Socket Wrench Screwdriver Attachment

144758870
NO PRIMARY REF14-475-8870: RNCC: 3 | RNVC: 2
0053359: RNCC: 5 | RNVC: 2
RTC.4: RNCC: 5 | RNVC: 2
18509469-0: RNCC: 5 | RNVC: 2

10 May 1995

5120-14-271-7950
Electrical Contact Inserter

142717950
816-S-027: RNCC: 3 | RNVC: 2
06-1742-04: RNCC: 5 | RNVC: 2
816S027: RNCC: 5 | RNVC: 2
91389004: RNCC: 5 | RNVC: 2
06-1742-04: RNCC: 5 | RNVC: 9
06-1742-04: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-406-5608
Spanner Wrench

144065608
853-200-620-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-441-2372
Tube Support De Pan

144412372
703A93-0900-24: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-220-7876
Open End Wrench

142207876
71-46: RNCC: 3 | RNVC: 2
V2-95-560: RNCC: 5 | RNVC: 2
170102: RNCC: 5 | RNVC: 2
10A46: RNCC: 5 | RNVC: 2
RACC46: RNCC: 5 | RNVC: 2
CS01-624: RNCC: 5 | RNVC: 2
CS01624: RNCC: 5 | RNVC: 2
71-46: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-512-1246
Spanner Wrench

145121246
446850: RNCC: 3 | RNVC: 2
446850-001: RNCC: 5 | RNVC: 9

4 Feb 1999

5120-14-212-9174
Cle Speciale Reserv

142129174
9970-115-219: RNCC: 3 | RNVC: 2
9970-115-219-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-574-5203
Torque Wrench

145745203
DV-10200: RNCC: 3 | RNVC: 2

25 Jan 2013

5120-14-321-8089
Socket Wrench Socket

143218089
3160S95-62-024: RNCC: 3 | RNVC: 2
85-674-6470: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-322-9882

5120-14-396-4118
Excentr Reglage Cle

143964118
6274-51006: RNCC: 3 | RNVC: 2
6274-2113320: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-263-6449
Cle Tubulaire Speci

142636449
010.601.000: RNCC: 3 | RNVC: 2
10-601-0: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-299-7110
Socket Wrench Socket

142997110
NK.29: RNCC: 3 | RNVC: 2
NK29: RNCC: 5 | RNVC: 2
3148510366005: RNCC: 5 | RNVC: 2
91711479: RNCC: 5 | RNVC: 2
NK-29: RNCC: 5 | RNVC: 2
0036600: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-444-3472
Socket Wrench Socket

144443472
GS86L-04: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-488-4874
Combination Box And Open End Wrench Set

144884874
NO PRIMARY REF14-488-4874: RNCC: 3 | RNVC: 2
3148515282102: RNCC: 5 | RNVC: 2
37-JE13: RNCC: 5 | RNVC: 2
37.JE13: RNCC: 5 | RNVC: 2
0528210: RNCC: 5 | RNVC: 9

14 May 1997

5120-14-416-7511
Comparateur Support

144167511
537275: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-225-4028

5120-14-553-2288
Socket Wrench Screwdriver Attachment Set

145532288
AMEX.3: RNCC: 3 | RNVC: 2

15 Mar 2007

5120-14-339-8424
Rallonge A Griffes

143398424
DLT055692: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-338-4776
Faux Mor Demi-Coqui

143384776
C46321-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-524-8928
Socket Wrench Extension

145248928
R.217RC: RNCC: 3 | RNVC: 2
8045425L00: RNCC: 5 | RNVC: 2

25 Apr 2001

5120-14-504-0288
Pliers

145040288
Y.107: RNCC: 3 | RNVC: 2
3148510881843: RNCC: 5 | RNVC: 2
0948 030 0: RNCC: 5 | RNVC: 2
Y.107: RNCC: 5 | RNVC: 2
0088184: RNCC: 5 | RNVC: 2
0949 200: RNCC: 5 | RNVC: 2
0917 1: RNCC: 5 | RNVC: 2

4 Feb 1998

5120-14-358-1749
Flat Tip Screwdriver

143581749
07603-0060200: RNCC: 3 | RNVC: 2
07603-0060200: RNCC: 5 | RNVC: 2

13 Aug 1979

5120-14-311-3962
Mechanical Puller Attachment

143113962
341A93-3226-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-438-5070
Torque Wrench Adapter

144385070
MHD535-25: RNCC: 3 | RNVC: 2
85-694-2853: RNCC: 6 | RNVC: 9

21 Mar 1990

Load More Results