What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 81 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 81 of 110

5120-14-369-3054

5120-14-386-6585
Filetee Poignee

143866585
9970-125-260: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-473-8816
Socket Wrench Socket

144738816
J.14LA: RNCC: 3 | RNVC: 2
3148510280615: RNCC: 5 | RNVC: 2
1111804A00: RNCC: 5 | RNVC: 2
0028061: RNCC: 5 | RNVC: 9
028061: RNCC: 5 | RNVC: 9

13 Jan 1995

5120-14-281-2945

5120-14-441-1499
Socket Wrench Ratchet Attachment

144411499
K.151AR: RNCC: 3 | RNVC: 2
3148510307756: RNCC: 5 | RNVC: 2
K151AR: RNCC: 5 | RNVC: 2
0030775: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-215-2703
Extracteur De Caval

142152703
177029: RNCC: 3 | RNVC: 2
177029: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-552-3124
Leveling-Support Jack

145523124
AMBELG P 200056 AA: RNCC: 3 | RNVC: 2

12 Dec 2006

5120-14-225-4036

5120-14-276-3069
Socket Wrench Socket

142763069
M55: RNCC: 3 | RNVC: 2
T55: RNCC: 3 | RNVC: 9
3148510317502: RNCC: 5 | RNVC: 2
DEMT55: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-271-6088
Open End Wrench

142716088
69-77: RNCC: 3 | RNVC: 2
E74301C77WWF: RNCC: 5 | RNVC: 1
3272670212992: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-250-0085
Spanner Wrench

142500085
H90P1005: RNCC: 3 | RNVC: 2
H90P1005: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-430-4157
Spanner Wrench

144304157
15137T13: RNCC: 3 | RNVC: 2

20 Mar 1989

5120-14-544-0859
Bearing And Bushing Inserter

145440859
16045427G: RNCC: 3 | RNVC: 2

3 Jan 2005

5120-14-350-6878

5120-14-490-6945
Gun

144906945
241 G 01330 075: RNCC: 3 | RNVC: 2
F300 0T 000 1081: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-322-7343
Cle A Creneaux

143227343
3005-78: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-309-6620
Outil Dextraction

143096620
CET16-9: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-571-2815
Socket Wrench Socket

145712815
189549919: RNCC: 3 | RNVC: 2
K.54HB: RNCC: 3 | RNVC: 2

8 Mar 2012

5120-14-435-0677
Torque Wrench Adapter

144350677
853-100-225-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-365-0184
Socket Wrench Socket

143650184
S.11/16H: RNCC: 3 | RNVC: 2
3148510549408: RNCC: 5 | RNVC: 2
S11-16H: RNCC: 5 | RNVC: 2
0054940: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-333-7360

5120-14-249-5512

5120-14-275-9925

5120-14-429-8249
Screwdriver Bit

144298249
EX.127: RNCC: 3 | RNVC: 2
0614 312 7: RNCC: 5 | RNVC: 2
2695 727: RNCC: 5 | RNVC: 2
3148510258171: RNCC: 5 | RNVC: 2
EX127: RNCC: 5 | RNVC: 2
1059141F00: RNCC: 5 | RNVC: 2
EX27: RNCC: 5 | RNVC: 9
0025817: RNCC: 5 | RNVC: 9

14 Feb 1989

5120-14-322-5419
Slugging Type Box Wrench Socket

143225419
50-51: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-412-1267
Wrench Extension Handle

144121267
F52320: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-407-2058
Bearing And Bushing Inserter

144072058
101665: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-362-1762
Outilla De Maintien

143621762
C46295: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-248-1087

5120-14-233-8743
Support Pour Nettoy

142338743
9970-111-095: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-385-3359
Out Compress Cloche

143853359
365A93-3300-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-381-2799
Raccord De Centrage

143812799
4051: RNCC: 3 | RNVC: 2
5000264051: RNCC: 5 | RNVC: 2
5000264051: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-248-3533

5120-14-240-3872

5120-14-564-9468
Screwdriver Bit

145649468
111022: RNCC: 3 | RNVC: 2
111022: RNCC: 5 | RNVC: 2

21 Jun 2010

5120-14-220-8418

5120-14-316-5569

5120-14-426-6650
Sheet Metalworking Dolly Block

144266650
281: RNCC: 3 | RNVC: 2
91616436: RNCC: 5 | RNVC: 2

15 Sep 1988

5120-14-456-8215
Bearing And Bushing Remover

144568215
45057815: RNCC: 3 | RNVC: 2
45057815: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-480-5612
Electronic Component Inserter And Remover

144805612
4652344A: RNCC: 3 | RNVC: 2

14 Mar 1996

5120-14-238-1390
Spanner Wrench

142381390
951617: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-031-5368
Open End Wrench

140315368
RT22855: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-040-7364
Socket Head Screw Key Set

140407364
000152003S: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-502-6318
Spanner Wrench

145026318
611397780: RNCC: 3 | RNVC: 2

17 Dec 1997

5120-14-538-3750
Solid Center Punch

145383750
NGM0010036240382: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-452-1351
Socket Wrench Socket

144521351
206703: RNCC: 3 | RNVC: 2
91628998: RNCC: 5 | RNVC: 2

18 Dec 1991

5120-14-478-4240
Socket Head Screw Key Set

144784240
82H.JP9: RNCC: 3 | RNVC: 2
3148511229514: RNCC: 5 | RNVC: 2
1113855Y00: RNCC: 5 | RNVC: 2
0122951: RNCC: 5 | RNVC: 9

31 Oct 1995

5120-14-392-5668
Cross Tip Screwdriver

143925668
ARX30: RNCC: 3 | RNVC: 2
0000056300: RNCC: 5 | RNVC: 2
CAR563: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-456-8219
Bearing And Bushing Remover

144568219
45057873: RNCC: 3 | RNVC: 2
45057873: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-314-9108
Spanner Wrench

143149108
M2-050: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-536-5293
Combination Box And Open End Wrench

145365293
40R.15/16: RNCC: 3 | RNVC: 2
3148511012086: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-289-8509
Electrical Contact Remover

142898509
M15519-20A: RNCC: 3 | RNVC: 2
69V102: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-448-4595
Pliers

144484595
NO PRIMARY REF14-448-4595: RNCC: 3 | RNVC: 2
387.16EG: RNCC: 5 | RNVC: 2
3148511725559: RNCC: 5 | RNVC: 2
387 16EG: RNCC: 5 | RNVC: 2
0172555: RNCC: 5 | RNVC: 9

26 Jun 1991

5120-14-271-6203
Open End Wrench

142716203
E74302C36-41WWF: RNCC: 2 | RNVC: 1

1 Jan 1970

5120-14-260-0371
Spanner Wrench

142600371
321-97-0004: RNCC: 3 | RNVC: 2
08-342: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-442-1312
Spanner Wrench

144421312
126A.120: RNCC: 3 | RNVC: 2
02822267: RNCC: 3 | RNVC: 2
4L08-240: RNCC: 3 | RNVC: 2
3148511347034: RNCC: 5 | RNVC: 2
0134702: RNCC: 5 | RNVC: 2
0134703: RNCC: 5 | RNVC: 2
126.120: RNCC: 5 | RNVC: 2

3 Oct 1990

5120-14-292-0790
Outillage Virage Am

142920790
NO PRIMARY REF14-292-0790: RNCC: 3 | RNVC: 2
W64: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-529-8529
Detent Handling Tool

145298529
7107-1460-053: RNCC: 3 | RNVC: 2

17 Apr 2002

5120-14-340-3076
Gen Support Collier

143403076
SE007-01M1: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-510-5977
Electronic Component Inserter And Remover

145105977
NO PRIMARY REF14-510-5977: RNCC: 3 | RNVC: 2
T6B: RNCC: 5 | RNVC: 9
5940AA9936604: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-333-5551

5120-14-566-5716
Mechanical Puller

145665716
99360706: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-14-447-3033
Open End Wrench

144473033
C04050715: RNCC: 3 | RNVC: 2
C04050715: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-548-2633
Socket Wrench Extension

145482633
NK.218A: RNCC: 3 | RNVC: 2
3148516579850: RNCC: 5 | RNVC: 2
NK.218: RNCC: 5 | RNVC: 2

20 Dec 2005

5120-14-395-1331
Screw Thread Insert Inserter

143951331
01500108300: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-233-8460
Socket Wrench Socket

142338460
S30: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-435-7738
Bearing And Bushing Inserter And Remover

144357738
8813845000: RNCC: 3 | RNVC: 2

22 Nov 1989

5120-14-417-8365
Bearing And Bushing Inserter And Remover

144178365
523098: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-14-425-9231
Seal Inserter And Remover

144259231
X6MCAAMX167324REPAM007: RNCC: 3 | RNVC: 2
60917166: RNCC: 5 | RNVC: 2

28 Jul 1988

5120-14-435-5969
Detent Handling Tool

144355969
8813922000: RNCC: 3 | RNVC: 2

8 Nov 1989

5120-14-231-9947

5120-14-228-5185

5120-14-444-5652
Broche

144445652
HTP417: RNCC: 3 | RNVC: 9

15 Jan 1991

5120-14-282-0527

5120-14-251-2348

5120-14-227-3130
Collier Special

142273130
941711: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-306-4351
Socket Head Screw Key

143064351
8810275002: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-358-5915
Cle A Tenons

143585915
MS1376-30-804: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-386-9861
Open End Wrench

143869861
40356-3212: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-424-8174
Positionneur Frein

144248174
365A93-3305-00: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-425-1542
Creve Canot

144251542
7M504: RNCC: 3 | RNVC: 2

22 Jun 1988

5120-14-578-1870
Inserter And Remove

145781870
8818171001: RNCC: 3 | RNVC: 2

7 Nov 2013

5120-14-380-8400
Faux Mors

143808400
PR47595: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-427-0892
Speciale Cle

144270892
537380: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-490-8771
Cle

144908771
4065 030 010 006: RNCC: 3 | RNVC: 2
F300 0T 000 5029: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-375-3660
Hand Screw Starter

143753660
AFE.2: RNCC: 3 | RNVC: 2
3148510050522: RNCC: 5 | RNVC: 2
AFE2: RNCC: 5 | RNVC: 2
0236961Q00: RNCC: 5 | RNVC: 2
244-070: RNCC: 5 | RNVC: 2
0005052: RNCC: 5 | RNVC: 9
FACOMAFE.2: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-230-2861
Flat Tip Screwdriver

142302861
210-9: RNCC: 3 | RNVC: 2
PC83: RNCC: 3 | RNVC: 2
708-8X200: RNCC: 3 | RNVC: 9
91300098: RNCC: 5 | RNVC: 2
130139: RNCC: 5 | RNVC: 2
A281S8X200: RNCC: 5 | RNVC: 2
AK8X200: RNCC: 5 | RNVC: 2
072863001: RNCC: 5 | RNVC: 2
91300098: RNCC: 5 | RNVC: 2
DEM708-8X200: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-562-8344
Cable Lacing Needle

145628344
629757: RNCC: 3 | RNVC: 2
3148516534408: RNCC: 5 | RNVC: 2

25 Nov 2009

5120-14-352-7189
Ressor Reglag Outil

143527189
347942: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-363-0032
Cer Monture Mandrin

143630032
213185: RNCC: 3 | RNVC: 2

3 Apr 1980

5120-14-348-0518
Ergot De Cle

143480518
C46846-2: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-467-2984
Hand Terminal Crimping Tool

144672984
C234030A: RNCC: 3 | RNVC: 2
FQC234030A: RNCC: 3 | RNVC: 2
91762361: RNCC: 5 | RNVC: 2
255-3045: RNCC: 5 | RNVC: 2
C234 030 A: RNCC: 5 | RNVC: 2
C234030A: RNCC: 5 | RNVC: 2

4 Jan 1994

5120-14-484-6525
Socket Wrench Socket

144846525
J.12LA: RNCC: 3 | RNVC: 2
3148510280417: RNCC: 5 | RNVC: 2
0028041: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-526-2926
Hand Blind Riveter

145262926
Y.105A: RNCC: 3 | RNVC: 2
Y.105B: RNCC: 3 | RNVC: 2
Y.105B: RNCC: 5 | RNVC: 2
SYQ0864: RNCC: 5 | RNVC: 2
0949 50: RNCC: 5 | RNVC: 2
3148510881829: RNCC: 5 | RNVC: 2
Y.105: RNCC: 5 | RNVC: 2

17 Jul 2001

5120-14-463-1183
Socket Wrench Handle Bar

144631183
207843A: RNCC: 3 | RNVC: 2
402565REP5: RNCC: 5 | RNVC: 2

26 May 1993

5120-14-202-2329

5120-14-524-8400
Screwdriver Bit

145248400
EP.001: RNCC: 3 | RNVC: 2

20 Apr 2001

5120-14-507-6127
Screwdriver Bit

145076127
ETOR.102: RNCC: 3 | RNVC: 2
ETOR102: RNCC: 5 | RNVC: 2
0025502: RNCC: 5 | RNVC: 9

29 Jul 1998

5120-14-398-6811
Piston Ring Expander

143986811
11280840H: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-517-1524
Socket Head Screw Key

145171524
10505037: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-14-387-5132
Socket Head Screw Key Set

143875132
0532730: RNCC: 3 | RNVC: 2
82.JU7: RNCC: 5 | RNVC: 2
82JU7: RNCC: 5 | RNVC: 2

15 Sep 1983

5120-14-548-7325
Socket Wrench Socket

145487325
SJ.14H: RNCC: 3 | RNVC: 2

3 Feb 2006

5120-14-550-6408
Spanner Wrench

145506408
675005: RNCC: 3 | RNVC: 2

4 Jul 2006

5120-14-317-0688
Mechanical Puller Attachment

143170688
588340: RNCC: 3 | RNVC: 9

7 Mar 1996

5120-14-201-0591
Open End Wrench

142010591
33-6X7: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-351-2538
Socket Head Screw Key

143512538
002860041P: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-401-9229
Piston Extractor

144019229
25145900001: RNCC: 3 | RNVC: 2
214861: RNCC: 5 | RNVC: 2
25545961000: RNCC: 5 | RNVC: 9
255459610: RNCC: 5 | RNVC: 9
2554596100: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-233-6094

5120-14-251-2595
Cle Speciale

142512595
BY148A10248: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-343-8360

5120-14-285-5763

5120-14-549-2227
Socket Wrench Socket Set

145492227
RTX.40: RNCC: 3 | RNVC: 2

13 Mar 2006

5120-14-380-8395
Spanner Wrench

143808395
PR47663: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-429-9836
Handling Tool Arm

144299836
16787966: RNCC: 3 | RNVC: 2
16787966: RNCC: 5 | RNVC: 9

22 Feb 1989

5120-14-388-9222
Tube Packing Ring Installing Tool

143889222
TC3044G001: RNCC: 3 | RNVC: 2
8812812000: RNCC: 5 | RNVC: 2

29 Nov 1983

5120-14-520-5740
Vise Jaw Caps

145205740
1223.M8: RNCC: 3 | RNVC: 2
3148512257318: RNCC: 5 | RNVC: 2

24 May 2000

5120-14-396-7172
Spanner Wrench

143967172
C47606: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-273-7719
Flat Tip Screwdriver

142737719
FR6: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-404-1174
Entretien Seringue

144041174
562: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-245-1827

5120-14-218-6736

5120-14-245-8134
Cle Speciale

142458134
D23521: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-466-2577
Spanner Wrench

144662577
0XB501-209-861-07: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-488-3123
Socket Head Screw Key Set

144883123
82H.JU7: RNCC: 3 | RNVC: 2
0532731: RNCC: 5 | RNVC: 2
3148515327315: RNCC: 5 | RNVC: 2
82HJU7: RNCC: 5 | RNVC: 2
205-5197: RNCC: 5 | RNVC: 2
FACOM82H.JU7: RNCC: 5 | RNVC: 9

30 Apr 1997

5120-14-370-9582
Outil Poin Pointeau

143709582
3CGF77-2E: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-343-6004
Extracteur Contact

143436004
164629.02: RNCC: 3 | RNVC: 2
164629: RNCC: 5 | RNVC: 2
016462902: RNCC: 5 | RNVC: 9

16 Jun 1977

5120-14-338-4796
Mise En Forme Cone

143384796
S16-0605-0451: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-370-4531
Brad Awl

143704531
NO PRIMARY REF14-370-4531: RNCC: 3 | RNVC: 2
C29-9: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-514-0193
Open End Wrench

145140193
ENFD29159-27X29: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-514-0149
Open End Wrench

145140149
ENFD29159-25X28: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-514-0194
Open End Wrench

145140194
ENFD29159-27X30: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-526-0164
Ou Buse Melangeuse

145260164
14487: RNCC: 3 | RNVC: 2
1030974T00: RNCC: 5 | RNVC: 2

28 Jun 2001

5120-14-224-9880

5120-14-271-6127

5120-14-561-4157
Spanner Wrench

145614157
82360882001: RNCC: 3 | RNVC: 2

16 Jul 2009

5120-14-260-4179

5120-14-375-8082
Spanner Wrench

143758082
16380898: RNCC: 3 | RNVC: 2
16380898: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-499-5036
Screwdriver Bit

144995036
6680370B95: RNCC: 3 | RNVC: 2
F300 0T 022 9824: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-364-0803
Preformed Packing Inserter And Remover

143640803
8813403000: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-247-1969
Spanner Wrench

142471969
C54565: RNCC: 3 | RNVC: 2
100849: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-254-4906
Spanner Wrench

142544906
CY0: RNCC: 3 | RNVC: 2
ZINCY0: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-490-6823
Kit

144906823
208 K 00384 000: RNCC: 3 | RNVC: 2
F300 0T 000 0917: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-562-3993
Ratchet Wrench Set

145623993
MOD.65J7: RNCC: 3 | RNVC: 2
0784571: RNCC: 5 | RNVC: 2
3148517845718: RNCC: 5 | RNVC: 2

21 Oct 2009

5120-14-368-4056
Mechanical Puller Attachment

143684056
8813285002: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-367-6220
Spanner Wrench

143676220
VDP7251: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-527-1106
Hand Terminal Crimping Tool

145271106
8819028000: RNCC: 3 | RNVC: 2

3 Oct 2001

5120-14-276-6386

5120-14-392-0497
Open End Wrench

143920497
MHA283-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-223-2551
Cle De Volant De Po

142232551
D1054-5935: RNCC: 3 | RNVC: 2
D1054-5935: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-412-2980
Spanner Wrench

144122980
UHS088-41: RNCC: 3 | RNVC: 2
UHS088-41: RNCC: 5 | RNVC: 2

8 Oct 1986

5120-14-508-6082
Cross Tip Screwdriver

145086082
AZD.0X75: RNCC: 3 | RNVC: 2
176-0826: RNCC: 5 | RNVC: 2
0013404: RNCC: 5 | RNVC: 2
1092118X00: RNCC: 5 | RNVC: 2
FACOMAZD.0X75: RNCC: 5 | RNVC: 9

22 Sep 1998

5120-14-346-4189
Outillage Special

143464189
0M21-41659-4A: RNCC: 3 | RNVC: 2

12 Dec 1977

5120-14-202-9293

5120-14-338-4814
Mise En Forme Cone

143384814
S16-0605-0511: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-203-2936
Embout Montage Demo

142032936
1521-96-34: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-567-5486
Socket Head Screw Key

145675486
D1717-2240: RNCC: 3 | RNVC: 2

24 Mar 2011

5120-14-545-9206
Spring Inserter And Remover

145459206
S47017: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-375-8034
Bearing And Bushing Inserter

143758034
301A97158: RNCC: 3 | RNVC: 2
91371590: RNCC: 5 | RNVC: 2
301A97158: RNCC: 5 | RNVC: 9
301A97158: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-305-6009
Socket Wrench Screwdriver Attachment

143056009
JT.1/8: RNCC: 3 | RNVC: 2
3148515064401: RNCC: 5 | RNVC: 2
JT1-8: RNCC: 5 | RNVC: 2
0506440: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-357-4327
Socket Head Screw Key

143574327
7395CLEDE3MM: RNCC: 3 | RNVC: 2
XCELITE99-75MM: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-387-5009
Outilla Adap Bobine

143875009
915-3-96-240: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-232-9933
Matrice De Sertissa

142329933
48754-1: RNCC: 3 | RNVC: 2
48754: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-274-5181
Matrice Outil A Ser

142745181
47823: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-370-8866
Redressage Socle

143708866
6802J34-1000-01: RNCC: 3 | RNVC: 2
6802360A34-1000-01: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-394-1897
Spanner Wrench

143941897
Z0101-942: RNCC: 3 | RNVC: 2

23 Jun 1984

5120-14-217-5088
Cle Bouchon Reservo

142175088
17-9-58: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-308-2162

5120-14-213-5217

5120-14-295-2573

5120-14-566-5077
Socket Head Screw Key

145665077
AWSH5X100: RNCC: 3 | RNVC: 2
0774516: RNCC: 5 | RNVC: 2
3148517745162: RNCC: 5 | RNVC: 2

22 Nov 2010

5120-14-563-1323
Ring Beanding Tool

145631323
PE 38: RNCC: 3 | RNVC: 2

6 Jan 2010

5120-14-288-6798

5120-14-273-6995

5120-14-415-4431
Socket Wrench Attachment Universal Joint

144154431
M4Z6021902401: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-370-0521
Electrical Card Extractor

143700521
22375811: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-555-5963
Mechanical Puller Attachment

145555963
14430: RNCC: 3 | RNVC: 2

29 Nov 2007

5120-14-242-9081
Spanner Wrench

142429081
407950: RNCC: 3 | RNVC: 9
SR101007: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-263-8174

5120-14-222-1452
Cross Tip Screwdriver

142221452
AMP1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-375-0524
Cle A Panier

143750524
GSM196-010F8: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-421-0795
Passe-Joint

144210795
6254-58491: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-514-3864
Screwdriver Bit

145143864
ENFD6526AC1X5-5: RNCC: 3 | RNVC: 2

19 May 1999

5120-14-474-0975
Hose Strap Band Clamping Tool

144740975
1097NI: RNCC: 3 | RNVC: 2
131354: RNCC: 5 | RNVC: 2
994126: RNCC: 5 | RNVC: 2
3.249.602.000: RNCC: 5 | RNVC: 2

25 Jan 1995

5120-14-570-2058
Bearing And Bushing Inserter

145702058
UFA31550: RNCC: 3 | RNVC: 2

28 Nov 2011

5120-14-565-1758
Socket Wrench Spanner Attachment

145651758
853-290-192-0: RNCC: 3 | RNVC: 2

21 Jul 2010

5120-14-385-3141
Cle Support

143853141
360A93-3305-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-263-6761
Cle Telescopique

142636761
FH86-908: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-484-8632
Faux Arbre Demontag

144848632
NNP5120940026408: RNCC: 3 | RNVC: 2

12 Dec 1996

5120-14-215-2033

5120-14-371-1947

5120-14-362-5053
Compression Griffe

143625053
003003035M: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-399-6108
Open End Wrench

143996108
6800-1152: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-392-0535
Torque Wrench Adapter

143920535
MHD459-23: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-226-0692

5120-14-286-2233
Open End Wrench

142862233
20.15: RNCC: 3 | RNVC: 2
20-15: RNCC: 5 | RNVC: 2
0093550: RNCC: 5 | RNVC: 9
3148510935508: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-374-6775

5120-14-324-7550

5120-14-316-6653

5120-14-241-1532
Extracteur Daxe Dar

142411532
0815-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-425-9260
Mandrin Emmanchemen

144259260
600119: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-217-3648

5120-14-347-3440

5120-14-307-6472
Cone Femel Chem Et4

143076472
33391REP2: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-258-2449

5120-14-406-7938
Bearing And Bushing Inserter

144067938
NO PRIMARY REF14-406-7938: RNCC: 3 | RNVC: 2
601503: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-458-8863
Socle Assembleur

144588863
M53621-02: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-220-8385
Socket Wrench Crowfoot Attachment

142208385
17-9-44: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-281-1866
Spanner Wrench

142811866
4625: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-566-9657
Spanner Wrench

145669657
49015552: RNCC: 3 | RNVC: 2

21 Jan 2011

5120-14-292-7398

5120-14-522-0995
Modifiee Cle

145220995
20855178: RNCC: 3 | RNVC: 2

4 Oct 2000

5120-14-273-7087

5120-14-263-8173

5120-14-365-8000
Abrasive Wheel Dresser Cutters

143658000
NO PRIMARY REF14-365-8000: RNCC: 3 | RNVC: 2
700992: RNCC: 5 | RNVC: 9

8 Oct 1980

5120-14-304-3148
Bague De Retreint

143043148
S16-0606-1681: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-411-2139
Crowfoot Socket Wrench Head

144112139
4A676-21-03W26H: RNCC: 3 | RNVC: 2
4A-676-21-03-W26H: RNCC: 5 | RNVC: 2
85-692-0038: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-510-7135
Flat Tip Screwdriver

145107135
CK4735-125X4-5: RNCC: 3 | RNVC: 2

9 Nov 1998

5120-14-256-2424

5120-14-423-3236
Chassoir Epaule

144233236
JZAR26: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-258-7387

5120-14-387-1642
Reglage Outillage

143871642
098030: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-574-3900
Pipe Wrench

145743900
011600: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-14-285-1227
Cle

142851227
S16-0665-0009: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-454-9418
Flat Tip Screwdriver

144549418
AEF1,8X35: RNCC: 3 | RNVC: 2
3148510048840: RNCC: 5 | RNVC: 2
104-4124: RNCC: 5 | RNVC: 2
0613 460 05: RNCC: 5 | RNVC: 2
004884: RNCC: 5 | RNVC: 9
FACOMAEF1,8X35: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-214-1838
Cle Demontage Filtr

142141838
A26009: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-280-8780

5120-14-257-0483
Poignee Speciale

142570483
C46384: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-280-3279
Bague Appui

142803279
403740T: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-440-6797
Mechanical Puller Attachment

144406797
332A93-3604-27: RNCC: 3 | RNVC: 2

18 Jul 1990

5120-14-273-3300

5120-14-317-2741
Bloc De Sertissage

143172741
14121: RNCC: 3 | RNVC: 2
14121: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-510-7221
Socket Head Screw Key

145107221
1698-091A306: RNCC: 3 | RNVC: 2
1698-091A306: RNCC: 5 | RNVC: 2

9 Nov 1998

5120-14-416-7628
Mandrin Presse

144167628
540356: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-384-4238
Te De Raccordement

143844238
04640002400: RNCC: 3 | RNVC: 2
046400024: RNCC: 5 | RNVC: 2

4 May 1983

5120-14-566-5752
Seal Remover

145665752
99363204: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-14-527-8646
Adaptateur Ecrou

145278646
E2C001230000104: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-228-5182

5120-14-262-4056

5120-14-272-3294

5120-14-443-6335
Manifold

144436335
NO PRIMARY REF14-443-6335: RNCC: 3 | RNVC: 2
OU135006: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-201-3066
Flat Tip Screwdriver

142013066
271-14: RNCC: 3 | RNVC: 2
104-10: RNCC: 3 | RNVC: 2
TFT10: RNCC: 3 | RNVC: 2
4416-250: RNCC: 3 | RNVC: 2
3272670209213: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-446-9397
Cle Speciale

144469397
2-45730: RNCC: 3 | RNVC: 2

17 Apr 1991

5120-14-574-2514
Ratchet Wrench

145742514
R.PE: RNCC: 3 | RNVC: 2

19 Dec 2012

5120-14-524-5999
Spanner Wrench

145245999
23REDN-LN332218B.PL2:2.F12: RNCC: 3 | RNVC: 2
SYB2332: RNCC: 5 | RNVC: 2

29 Mar 2001

5120-14-576-6377
Mechanical Puller S

145766377
8813927004: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-314-2343
Socket Wrench Crowfoot Attachment

143142343
160-71960-22: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-369-7342
Electrical Contact Inserter

143697342
15513-120: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-253-9760
Spanner Wrench

142539760
C1-46268: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-328-2708

5120-14-532-2529
Socket Wrench Socket

145322529
SJ.10: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-220-7905
Open End Wrench

142207905
RACD19: RNCC: 3 | RNVC: 2
RACD19: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-220-7897
Open End Wrench

142207897
RACD71: RNCC: 3 | RNVC: 2
RACD71: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-294-0271

5120-14-290-5955

5120-14-269-4932

5120-14-409-5151
Debit Disp Controle

144095151
8814662000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-232-9209
Adaptateur Emmanche

142329209
58985: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-339-0155

5120-14-511-1057
Sheet Metalworking Stake

145111057
2720006: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-331-4367

5120-14-273-7007

5120-14-520-9482
Adjustable Wrench

145209482
99350114: RNCC: 3 | RNVC: 9

23 Jun 2000

5120-14-207-4916

5120-14-566-4256
Mechanical Puller

145664256
5000261798: RNCC: 3 | RNVC: 2

15 Nov 2010

5120-14-245-2342

5120-14-334-1686
Serrage Axe Outil

143341686
TF10A71302: RNCC: 3 | RNVC: 2
85-688-4605: RNCC: 6 | RNVC: 9

23 Apr 1976

5120-14-454-9494
Flat Tip Screwdriver

144549494
AEF.3X75: RNCC: 3 | RNVC: 2
3148510048949: RNCC: 5 | RNVC: 2
104-3935: RNCC: 5 | RNVC: 2
0613 460 08: RNCC: 5 | RNVC: 2
004894: RNCC: 5 | RNVC: 9
FACOMAEF.3X75: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-223-2548
Cle Pour Reglage De

142232548
D1054-5895: RNCC: 3 | RNVC: 2
D1054-5895: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-231-6182
Open End Wrench

142316182
NO PRIMARY REF14-231-6182: RNCC: 3 | RNVC: 2
70-17X21: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-343-1828
Pose Filet Rapp Nez

143431828
01500610932: RNCC: 3 | RNVC: 2
01556107021: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-575-6692
Socket Head Screw Key

145756692
7400984407: RNCC: 3 | RNVC: 2

22 Apr 2013

5120-14-578-1921
Seal Inserter And Remover

145781921
TM3261G001: RNCC: 3 | RNVC: 2

8 Nov 2013

5120-14-223-0510

5120-14-411-0101
Clapet Extracteur

144110101
35164: RNCC: 3 | RNVC: 2

28 Jul 1986

5120-14-572-1080
Spanner Wrench

145721080
261758935: RNCC: 3 | RNVC: 2

7 Jun 2012

5120-14-410-0631
Torque Wrench Adapter

144100631
853-100-209-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-302-5049
Outilxreglable Bras

143025049
NO PRIMARY REF14-302-5049: RNCC: 3 | RNVC: 2
42-27-04-025: RNCC: 5 | RNVC: 9

21 Feb 1996

5120-14-440-6795
Mechanical Puller Attachment

144406795
332A93-3604-23: RNCC: 3 | RNVC: 2

18 Jul 1990

5120-14-379-1522
Electrical Card Extractor

143791522
21320834: RNCC: 3 | RNVC: 2
21320834-00: RNCC: 5 | RNVC: 2

6 Sep 1982

5120-14-544-1387
Tube Packing Ring Installing Tool

145441387
30691-13010: RNCC: 3 | RNVC: 2

5 Jan 2005

5120-14-570-6354
Six Point Tip Screwdriver

145706354
TB-27X115: RNCC: 3 | RNVC: 2

12 Jan 2012

5120-14-263-2920
Appareil Demontage

142632920
NO PRIMARY REF14-263-2920: RNCC: 3 | RNVC: 2
B1C313159: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-364-4091
Montage Pisto Guide

143644091
UGD232-26: RNCC: 3 | RNVC: 2
MGD232-26: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-369-4905
Jet Pour Tassement

143694905
9970-126-295: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-471-5093
Torque Wrench Adapter

144715093
10.18: RNCC: 3 | RNVC: 2
10-18: RNCC: 5 | RNVC: 2
3148510925653: RNCC: 5 | RNVC: 2
8045715R00: RNCC: 5 | RNVC: 2
0092565: RNCC: 5 | RNVC: 9

31 Aug 1994

5120-14-456-3057
Mandrin Pour Connec

144563057
11147: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-292-0783
Appareil Acc Electr

142920783
NO PRIMARY REF14-292-0783: RNCC: 3 | RNVC: 2
M0NT0IRBK87: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-360-4350
Molder's Foundry Lifter

143604350
0U50011: RNCC: 3 | RNVC: 2
85-689-9531: RNCC: 6 | RNVC: 9

23 Nov 1979

5120-14-572-9438
Hand Hydraulic Jack

145729438
AV-08TA: RNCC: 3 | RNVC: 2
724562: RNCC: 5 | RNVC: 2

30 Aug 2012

5120-14-362-7866
Vise Jaw Caps

143627866
C47834: RNCC: 3 | RNVC: 2
85-691-0783: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-363-2203
Detent Handling Tool

143632203
3160S95-63-135: RNCC: 3 | RNVC: 2
85-689-8104: RNCC: 6 | RNVC: 9

3 Apr 1980

5120-14-314-4051
Spanner Wrench

143144051
3511-961-39921: RNCC: 3 | RNVC: 2
MQ13992: RNCC: 5 | RNVC: 2
3511 961 39921: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-270-7137
Open End Wrench

142707137
NO PRIMARY REF14-270-7137: RNCC: 3 | RNVC: 2
74231-19X21: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-451-4129
Cross Tip Screwdriver

144514129
NO PRIMARY REF14-451-4129: RNCC: 3 | RNVC: 2
641700: RNCC: 5 | RNVC: 9
PH00-3X50: RNCC: 5 | RNVC: 9

19 Nov 1991

5120-14-363-9852
Detent Handling Tool

143639852
330A98-2187-00: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-436-8678
Socket Head Screw Key

144368678
31407063: RNCC: 3 | RNVC: 9
634147: RNCC: 3 | RNVC: 9
85-694-1381: RNCC: 6 | RNVC: 9

3 Jan 1990

5120-14-265-6094
Cle De Mecanicien

142656094
NO PRIMARY REF14-265-6094: RNCC: 3 | RNVC: 2
MLE1937M207: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-438-7406
Flat Tip Screwdriver

144387406
AC.2X75: RNCC: 3 | RNVC: 2
3148510038056: RNCC: 5 | RNVC: 2
0613 332 25: RNCC: 5 | RNVC: 2
AC2X75: RNCC: 5 | RNVC: 2
1057427B00: RNCC: 5 | RNVC: 2
91640369: RNCC: 5 | RNVC: 2
162-7432: RNCC: 5 | RNVC: 2
0003805: RNCC: 5 | RNVC: 9
FACOMAC.2X75: RNCC: 5 | RNVC: 9

3 Apr 1990

5120-14-438-9644
Quick Adjusting Screw Clamp

144389644
330A98-2183-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-374-0862
Socket Wrench Crowfoot Attachment

143740862
MHB101-44: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-429-5914
Grinding Tool

5120-14-456-0974

5120-14-226-3720

5120-14-499-0078
Cle

144990078
420 876 357: RNCC: 3 | RNVC: 2
420 876 357: RNCC: 5 | RNVC: 2
F300 0T 015 3228: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-249-0654

5120-14-212-0505

5120-14-304-4382
Spanner Wrench

143044382
8810526000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-520-8846
Socket Head Screw Key

145208846
CLE0094883X00: RNCC: 3 | RNVC: 2

21 Jun 2000

5120-14-556-0026
Socket Wrench Extension

145560026
14100013847: RNCC: 3 | RNVC: 2

21 Jan 2008

5120-14-431-4826
Socket Head Screw Key

144314826
0372-42-10167: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-304-3116
Bague De Compressio

143043116
C47168: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-276-7021
Compresseur Ressort

142767021
0846-78: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-575-1866
Socket Head Screw Key

145751866
82502499000: RNCC: 3 | RNVC: 1

19 Mar 2013

5120-14-257-1792

5120-14-216-4096

5120-14-215-9607
Cle Plate

142159607
773-411-003F3-58X5X54X5: RNCC: 3 | RNVC: 2
773-411-003F3-58X5X54X5: RNCC: 5 | RNVC: 9
773-411-003FF3-58X5X54X5: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-377-3012
Montage Dessai

143773012
MK032-21-00: RNCC: 3 | RNVC: 2
MK032-21-00: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-475-1003
Embout Joining Piec

144751003
45040407: RNCC: 3 | RNVC: 9

17 Mar 1995

5120-14-362-5054
Cric Poussee Plaque

143625054
003004035M: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-237-7646

5120-14-416-7467
Guidage Outil

144167467
536857: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-313-5359

5120-14-569-3906
Socket Wrench Extension

145693906
82626911000: RNCC: 3 | RNVC: 2

12 Sep 2011

5120-14-350-7733
Guide Demmanchement

143507733
OXB501-486-864-2: RNCC: 3 | RNVC: 2
0XB501-486-864-2: RNCC: 5 | RNVC: 2
85-635-2780: RNCC: 6 | RNVC: 9

12 Jul 1978

5120-14-574-4334
Open End Wrench

145744334
AA7-62NF1-1433: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-14-392-0862
Torque Wrench Adapter

143920862
853-100-095-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-524-4970
Torque Wrench Adapter

145244970
8-17-7-882-195: RNCC: 3 | RNVC: 2

21 Mar 2001

5120-14-444-3470
Socket Wrench Socket

144443470
GS86L-05: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-432-7123
Open End Wrench

144327123
NO PRIMARY REF14-432-7123: RNCC: 3 | RNVC: 2
0U139132: RNCC: 5 | RNVC: 9
OU139132: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-237-4736
Cle Speciale

142374736
3130S98-05-011: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-387-1943
Equipee Jauge

143871943
MMJ041-05: RNCC: 3 | RNVC: 2
MMJ041-05: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-569-0326
Mechanical Puller

145690326
F27372000: RNCC: 3 | RNVC: 2

1 Aug 2011

5120-14-217-2713

5120-14-236-2440

5120-14-217-2678

5120-14-323-2624
Pince Reglage Debit

143232624
9970-111-047: RNCC: 3 | RNVC: 2
85-686-2881: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-479-8096
Screwdriver Bit

144798096
ES.603: RNCC: 3 | RNVC: 2
3148510248288: RNCC: 5 | RNVC: 2
1114807B00: RNCC: 5 | RNVC: 2
163-0135: RNCC: 5 | RNVC: 2
0024828: RNCC: 5 | RNVC: 9
FACOMES.603: RNCC: 5 | RNVC: 9

7 Feb 1996

5120-14-439-6222
Bearing And Bushing Inserter

144396222
6801G32-2115-00: RNCC: 3 | RNVC: 2

16 May 1990

5120-14-204-9378
Shovel Handle

142049378
NO PRIMARY REF14-204-9378: RNCC: 3 | RNVC: 2
CHA2-303MANCHE: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-443-1728
Torque Wrench Adapter

144431728
10.19: RNCC: 3 | RNVC: 2
1019: RNCC: 5 | RNVC: 2
1009568D00: RNCC: 5 | RNVC: 2
10-19: RNCC: 5 | RNVC: 2
91629925: RNCC: 5 | RNVC: 2
1780550476: RNCC: 5 | RNVC: 2
TA5006P009: RNCC: 5 | RNVC: 2
3148510925707: RNCC: 5 | RNVC: 2
0092570: RNCC: 5 | RNVC: 9

12 Nov 1990

5120-14-364-2603
Combination Open End And Spanner Wrench

143642603
Y050-001-000A: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-222-1409
Sheet Metalworking Dolly Block

142221409
290-105X80: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-374-0889
Etau Cle

143740889
UHN304-42: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-392-5686
Sangle Monte Piston

143925686
NO PRIMARY REF14-392-5686: RNCC: 3 | RNVC: 2
255459031: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-216-4178
Socket Wrench Crowfoot Attachment

142164178
300246: RNCC: 3 | RNVC: 2
100-20A: RNCC: 5 | RNVC: 2
120A: RNCC: 5 | RNVC: 2
DIAMETRE20ASERIE100: RNCC: 5 | RNVC: 2
W0F120A: RNCC: 5 | RNVC: 2
100-120A: RNCC: 5 | RNVC: 2
120: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-329-6503
Bearing And Bushing Inserter And Remover

143296503
3160S95-63-140: RNCC: 3 | RNVC: 2
GPLV87-32: RNCC: 5 | RNVC: 2
85-100-3212: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-237-2347
Bride

142372347
940827: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-490-8729
Cle

144908729
4065 030 000 176: RNCC: 3 | RNVC: 2
F300 0T 000 4969: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8705
Meche

144908705
4061 551 130 080: RNCC: 3 | RNVC: 2
F300 0T 000 4945: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-436-0187
Protectr Monte Join

144360187
RT30286: RNCC: 3 | RNVC: 2
586450: RNCC: 5 | RNVC: 9

29 Nov 1989

5120-14-328-1267

5120-14-221-8236

5120-14-323-9396
Screw Thread Insert Inserter

143239396
01500112300: RNCC: 3 | RNVC: 2
32241290: RNCC: 5 | RNVC: 2
85-688-1834: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-517-4433
Open End Wrench

145174433
GS120-20X22: RNCC: 3 | RNVC: 2
1.70.1014: RNCC: 5 | RNVC: 2

15 Dec 1999

5120-14-383-0906
Ensem Pulverisation

143830906
9970-121-300: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-465-6568
Open End Wrench

144656568
100-406: RNCC: 3 | RNVC: 9
100-406: RNCC: 5 | RNVC: 9
85-694-1840: RNCC: 6 | RNVC: 9

6 Oct 1993

5120-14-529-8977
Drift

145298977
TO/A14005010: RNCC: 3 | RNVC: 2

17 Apr 2002

5120-14-433-6856
Spanner Wrench

144336856
332A93-3126-02: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-505-9091
Retaining Ring Installation Tool

145059091
853-203-233-0: RNCC: 3 | RNVC: 2

26 Mar 1998

5120-14-340-6481
Combination Box And Open End Wrench

143406481
40.1'5/16L: RNCC: 3 | RNVC: 2
3148511012345: RNCC: 5 | RNVC: 2
40-1 5-16: RNCC: 5 | RNVC: 2
40 1 5/16L: RNCC: 5 | RNVC: 2
0101234: RNCC: 5 | RNVC: 9

14 Feb 1977

5120-14-406-6191
Joints Emmanche

144066191
853-200-789-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-369-6055
Outil De Collage

143696055
6201B1130-035-01: RNCC: 3 | RNVC: 2
6201-3160S11-30-035-01: RNCC: 5 | RNVC: 2
85-691-1355: RNCC: 6 | RNVC: 9

17 Apr 1981

5120-14-208-7296

5120-14-347-0222
Cone De Guidage

143470222
D47735: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-325-0298
Robinets Tas

143250298
0S21459: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-388-9048
Outil Adaptation Bu

143889048
20180448: RNCC: 3 | RNVC: 2
20180448: RNCC: 5 | RNVC: 2

29 Nov 1983

5120-14-271-8396

5120-14-491-0133
Cle

144910133
4602 007 200 064: RNCC: 3 | RNVC: 2
F300 0T 001 0919: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-376-2321

5120-14-503-3241
Guidon Pour Arc

145033241
1100: RNCC: 3 | RNVC: 2

9 Jan 1998

5120-14-438-7785
Bearing And Bushing Inserter And Remover

144387785
330A93-6312-20: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-570-7249
Socket Wrench

145707249
94-SD16: RNCC: 3 | RNVC: 2

19 Jan 2012

5120-14-225-3977

5120-14-433-6321
Socket Head Screw Key

144336321
6269-58522: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-387-3837
Spanner Wrench

143873837
9970-146-688: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-347-1877
Spanner Wrench

143471877
8811060203: RNCC: 3 | RNVC: 2
85-800-6664: RNCC: 6 | RNVC: 9

19 Jan 1978

5120-14-292-0777
Verin Hydrauliq Ens

142920777
24545963000: RNCC: 3 | RNVC: 2
145J630: RNCC: 5 | RNVC: 9
245459630: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-443-6333
Mandrin Coupl Rotul

144436333
NO PRIMARY REF14-443-6333: RNCC: 3 | RNVC: 2
OU134943: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-438-5482
Pliers

144385482
288-16P0PVC: RNCC: 3 | RNVC: 2

26 Mar 1990

5120-14-212-9096
Support Elements Fi

142129096
9970-111-034: RNCC: 3 | RNVC: 2
9970-111-034-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-508-8996
Retaining Ring Pliers

145088996
197E-23: RNCC: 3 | RNVC: 2
197E.23: RNCC: 5 | RNVC: 2
3148511456880: RNCC: 5 | RNVC: 2
SYQ5182: RNCC: 5 | RNVC: 2

7 Oct 1998

5120-14-349-8666
Spanner Wrench

143498666
0427-02010: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-255-0158
Barre De Manutentio

142550158
771016: RNCC: 3 | RNVC: 2
SOG771016: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-262-8237

5120-14-266-8074

5120-14-223-2555
Spanner Wrench

142232555
D1054-16025: RNCC: 3 | RNVC: 2
D1054-16025: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-322-6941
Spanner Wrench

143226941
NO PRIMARY REF14-322-6941: RNCC: 3 | RNVC: 2
BL42597: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-271-6202
Open End Wrench

142716202
E74302C30-32WWF: RNCC: 2 | RNVC: 1

1 Jan 1970

5120-14-264-9571
Spanner Wrench

142649571
0232-78: RNCC: 3 | RNVC: 2
00-200-1235: RNCC: 3 | RNVC: 2
RA232: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-428-8166
Socket Head Screw Key

144288166
N32416-161NG-201-14: RNCC: 2 | RNVC: 2

22 Dec 1988

5120-14-200-6590
Adjustable Wrench

142006590
61-06: RNCC: 3 | RNVC: 2
1835: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-245-9068
Collier Pour Evasem

142459068
7062BA1C0LLIERT1-20: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-521-6645
Spanner Wrench

145216645
2P84536-00: RNCC: 3 | RNVC: 2

1 Sep 2000

5120-14-451-4135
Cross Tip Screwdriver

144514135
NO PRIMARY REF14-451-4135: RNCC: 3 | RNVC: 2
641800: RNCC: 5 | RNVC: 9
PH1-5X100: RNCC: 5 | RNVC: 9

19 Nov 1991

5120-14-409-3439
Micros Outil Insert

144093439
8326: RNCC: 3 | RNVC: 2
880-14: RNCC: 5 | RNVC: 9

28 May 1986

5120-14-347-7049

5120-14-481-3148
Spanner Wrench

144813148
10381394: RNCC: 3 | RNVC: 2

1 May 1996

5120-14-277-3082
Socket Wrench Socket

142773082
13599800R: RNCC: 3 | RNVC: 2
59980: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-366-7354
Electrical Contact Remover

143667354
592: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-438-8790
Face Spanner Wrench Socket

144388790
0446458T00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-291-1084
Flat Tip Screwdriver

142911084
AB9X250: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-440-4990
Spanner Wrench

144404990
MUP5837: RNCC: 3 | RNVC: 2

16 Jul 1990

5120-14-411-8784
Electrical Card Extractor

144118784
136123: RNCC: 3 | RNVC: 2

10 Sep 1986

5120-14-296-5481
Screw Thread Insert Inserter

142965481
01500167600: RNCC: 3 | RNVC: 2
32260460: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-490-8804
Aiguill

144908804
4066 213 400 200: RNCC: 3 | RNVC: 2
F300 0T 000 5076: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-461-6931
Verrou Filete

144616931
PL1DA002OR902010A: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-489-7908
Screwdriver Bit

144897908
ES.635,5: RNCC: 3 | RNVC: 2
3148510248233: RNCC: 5 | RNVC: 2
0024823: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-484-6518
Socket Wrench Extension

144846518
J.217: RNCC: 3 | RNVC: 2
3148510289458: RNCC: 5 | RNVC: 2
1068612S00: RNCC: 5 | RNVC: 2
91778023: RNCC: 5 | RNVC: 2
0028945: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-537-9581
Pliers

145379581
IF259-540: RNCC: 3 | RNVC: 9

8 Dec 2003

5120-14-303-3013
Spanner Wrench

143033013
6213-1315: RNCC: 3 | RNVC: 2
6213-1315: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-514-1197
Open End Wrench

145141197
ENFD29451-16X17: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-430-2734
Cle Vis De Pale

144302734
905478-2AREP15: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-534-6981
Socket Wrench Adapter

145346981
RA232: RNCC: 3 | RNVC: 2

2 Apr 2003

5120-14-568-6970
Socket Wrench Screwdriver Attachment

145686970
SV.8LB: RNCC: 3 | RNVC: 2
0673310: RNCC: 5 | RNVC: 2
3148516733108: RNCC: 5 | RNVC: 2
91900326: RNCC: 5 | RNVC: 2

29 Jun 2011

5120-14-325-0576
Emmanchemen Colonne

143250576
0S21832: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-479-0357
Torque Wrench Adapter

144790357
888-374-500-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-442-3360
Bearing Staking Installation Tool

144423360
332A93-3118-20: RNCC: 3 | RNVC: 2

10 Oct 1990

5120-14-419-4099
Face Spanner Wrench Socket

144194099
90890-06161: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-389-7582
Tete De Sertissage

143897582
483342-1: RNCC: 3 | RNVC: 2
85-692-4515: RNCC: 6 | RNVC: 9

20 Dec 1983

5120-14-514-7323
Cross Tip Screwdriver

145147323
ENFD6568-1X120: RNCC: 3 | RNVC: 2

11 Jun 1999

5120-14-314-1828
Slugging Type Box Wrench Socket

143141828
50-65: RNCC: 3 | RNVC: 2
108-65: RNCC: 3 | RNVC: 2
3272670242272: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-433-6276
Socket Head Screw Key

144336276
6254-57033: RNCC: 3 | RNVC: 2

2 Aug 1989

5120-14-315-1878
Mechanical Puller Attachment

143151878
0-79439-6: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-529-1213
Socket Wrench Socket

145291213
J.22LA: RNCC: 3 | RNVC: 2
3148510281414: RNCC: 5 | RNVC: 2

13 Mar 2002

5120-14-338-4689
Extracteur Broche

143384689
C46203-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-286-4318
Flat Tip Screwdriver

142864318
ARA.3,5X50: RNCC: 3 | RNVC: 2
30701: RNCC: 3 | RNVC: 2
307-1: RNCC: 5 | RNVC: 2
3148510105000: RNCC: 5 | RNVC: 2
ARA3,5X50: RNCC: 5 | RNVC: 2
ARA3-5X50: RNCC: 5 | RNVC: 2
0010500: RNCC: 5 | RNVC: 9
ARA3X40: RNCC: 5 | RNVC: 9
00-236-2140: RNCC: 6 | RNVC: 9
12-126-3124: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-443-6320
Outil D'emmanchemen

144436320
NO PRIMARY REF14-443-6320: RNCC: 3 | RNVC: 2
OU133999: RNCC: 5 | RNVC: 9

30 Nov 1990

5120-14-325-3431

5120-14-288-6985
Spanner Wrench

142886985
D1553-4830: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-265-6093
Cle De Mecanicien

142656093
NO PRIMARY REF14-265-6093: RNCC: 3 | RNVC: 2
MLE1937M206: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-474-5994
Rotating Members Aligning Tool

144745994
NO PRIMARY REF14-474-5994: RNCC: 3 | RNVC: 2
OU137570: RNCC: 5 | RNVC: 9

22 Feb 1995

5120-14-479-5684
Screwdriver Bit

144795684
ED.101T: RNCC: 3 | RNVC: 2
3148510226156: RNCC: 5 | RNVC: 2
0193743A00: RNCC: 5 | RNVC: 2
162-5997: RNCC: 5 | RNVC: 2
0022615: RNCC: 5 | RNVC: 9
FACOMED.101T: RNCC: 5 | RNVC: 9

24 Jan 1996

5120-14-427-2493
Spanner Wrench

144272493
488402M354-06P82: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-284-9934
Retaining Ring Pliers

142849934
0141280: RNCC: 3 | RNVC: 2
179-34: RNCC: 5 | RNVC: 2
179.34: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-569-0307
Mechanical Puller

145690307
F27342000-1: RNCC: 3 | RNVC: 2
F27342000: RNCC: 3 | RNVC: 9
F27342000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-537-4397
Socket Wrench Socket

145374397
S.1'3/16H: RNCC: 3 | RNVC: 2
3148510551456: RNCC: 5 | RNVC: 2

3 Nov 2003

5120-14-444-2739

5120-14-563-8305
Spanner Wrench

145638305
09962-01000: RNCC: 3 | RNVC: 2

19 Mar 2010

5120-14-300-9500
Vis Verin Equipe

143009500
341A91-0055-12: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-271-6086
Open End Wrench

142716086
69-54: RNCC: 3 | RNVC: 2
E74301C54WWF: RNCC: 5 | RNVC: 1
3272670225152: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-463-7470
Hand Blind Riveter

144637470
YHN-2: RNCC: 3 | RNVC: 2

25 Jun 1993

5120-14-490-1386
Socket Wrench Screwdriver Attachment

144901386
SHP.6EL1: RNCC: 3 | RNVC: 2
3148510589916: RNCC: 5 | RNVC: 2
SHP-6EL1: RNCC: 5 | RNVC: 2
0715 137 061: RNCC: 5 | RNVC: 2
0058991: RNCC: 5 | RNVC: 9

17 Sep 1997

5120-14-376-2298

5120-14-241-6029

5120-14-040-5863
Outil Special

140405863
0-73815: RNCC: 3 | RNVC: 2
073815: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-557-1865
Socket Wrench Socket

145571865
RHC-10: RNCC: 3 | RNVC: 2

23 May 2008

5120-14-435-0657
Ensemb Chasse-Rivet

144350657
851-910-018-0: RNCC: 3 | RNVC: 2
MO6658-2: RNCC: 5 | RNVC: 9

18 Oct 1989

5120-14-407-5919
Spanner Wrench

144075919
31737478: RNCC: 3 | RNVC: 9
85-693-0342: RNCC: 6 | RNVC: 9

27 Feb 1986

5120-14-277-8403
Outil De Montage

142778403
OXB501-300-000-11: RNCC: 3 | RNVC: 2
0XB501-300-000-11: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-260-2341
Cle

142602341
M3-051: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-497-7817
Manchon Centrage

144977817
420P331/44940: RNCC: 3 | RNVC: 2
420P331: RNCC: 5 | RNVC: 2

15 Oct 1997

5120-14-228-7393
Socket Wrench Adapter-Extension

142287393
NO PRIMARY REF14-228-7393: RNCC: 3 | RNVC: 2
Z12115: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-391-8625
Torque Wrench Adapter

143918625
MHB096-25: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-444-4600
Reparation Lot

144444600
234283: RNCC: 3 | RNVC: 2
85-694-3443: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-435-1281
Spanner Wrench

144351281
NO PRIMARY REF14-435-1281: RNCC: 3 | RNVC: 2
12-593-600: RNCC: 5 | RNVC: 9

18 Oct 1989

5120-14-501-7894
Flat Tip Screwdriver

145017894
NO PRIMARY REF14-501-7894: RNCC: 3 | RNVC: 2
300 039 061: RNCC: 5 | RNVC: 9
4065 200 000 569: RNCC: 5 | RNVC: 9
F300 0T 000 5048: RNCC: 6 | RNVC: 9

10 Nov 1997

5120-14-518-0274
Six Point Tip Screwdriver

145180274
ENFD6576-20X100-6PANS: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-244-6554
Clamp Base Bench Vise

142446554
3001-150X170MM: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-284-3338
Hand Lead Seal Press

142843338
5570-10: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-532-3258
Socket Wrench Socket

145323258
SJ.13/16: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-303-6271
Socket Wrench Socket

143036271
SM9-16: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-471-9210
Hand Terminal Crimping Tool

144719210
DF57-229-01: RNCC: 3 | RNVC: 2

27 Sep 1994

5120-14-455-5058
Retaining Ring Pliers

144555058
195-17: RNCC: 3 | RNVC: 2
3272670278547: RNCC: 5 | RNVC: 2

26 May 1992

5120-14-471-5397
Stakeholder Bench Plate

144715397
PL136: RNCC: 3 | RNVC: 2
85-695-0722: RNCC: 6 | RNVC: 9

31 Aug 1994

5120-14-540-8206
Hand Terminal Crimping Tool

145408206
8476-08: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-437-4397
Detent Handling Tool

144374397
NO PRIMARY REF14-437-4397: RNCC: 3 | RNVC: 2
89280193: RNCC: 5 | RNVC: 2
30822: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-369-7344
Terminal Crimping Tool Contact Positioner

143697344
8400-1609: RNCC: 3 | RNVC: 2
91547565: RNCC: 3 | RNVC: 9
91547565: RNCC: 5 | RNVC: 2

17 Apr 1981

5120-14-438-5079
Spanner Wrench

144385079
206477: RNCC: 3 | RNVC: 2
206477: RNCC: 5 | RNVC: 9
85-694-2831: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-276-3248
Screwdriver Bit

142763248
NO PRIMARY REF14-276-3248: RNCC: 3 | RNVC: 2
C0PSAT1875L25: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-386-1642
Pliers

143861642
703A94-1130-10: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-397-4286
Flat Tip Screwdriver

143974286
NO PRIMARY REF14-397-4286: RNCC: 3 | RNVC: 2
AKT8X60: RNCC: 5 | RNVC: 2
91352552: RNCC: 5 | RNVC: 2

14 Dec 1984

5120-14-514-0099
Open End Wrench

145140099
ENFD29159-14X15: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-444-9288

5120-14-443-9869

5120-14-444-3524

5120-14-559-4839
Bearing And Bushing Inserter And Remover

145594839
725603: RNCC: 3 | RNVC: 2

19 Jan 2009

5120-14-240-4792

5120-14-242-0999
Open End Wrench

142420999
NO PRIMARY REF14-242-0999: RNCC: 3 | RNVC: 2
14-40: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-286-2245
Open End Wrench

142862245
20.30: RNCC: 3 | RNVC: 2
20-30: RNCC: 5 | RNVC: 2
3148510937007: RNCC: 5 | RNVC: 2
0189174N00: RNCC: 5 | RNVC: 2
91396566: RNCC: 5 | RNVC: 2
0093700: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-299-9907
Spanner Wrench

142999907
260-75-16-01: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-548-6765
Electrical Contact Inserter And Remover

145486765
27534-20: RNCC: 3 | RNVC: 2

30 Jan 2006

5120-14-321-8097
Bearing And Bushing Inserter And Remover

143218097
3160S95-63-017: RNCC: 3 | RNVC: 2
GPLV87-29: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-556-4201
Edge Grip Sheet Metal Holder

145564201
P3BIS: RNCC: 3 | RNVC: 2

5 Mar 2008

5120-14-412-9403
Reglage Outillage

144129403
H47023: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-560-0634
Socket Head Screw Key

145600634
7400914006: RNCC: 3 | RNVC: 2
914006: RNCC: 5 | RNVC: 2

18 Mar 2009

5120-14-395-0752
De Retreint Bague

143950752
H46674: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-546-4932

5120-14-444-2747

5120-14-443-9871

5120-14-416-7644
Fixation Entretoise

144167644
540420: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-212-9560
Cle De Reglage Spec

142129560
NO PRIMARY REF14-212-9560: RNCC: 3 | RNVC: 2
147844: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-497-7985
Screwdriver Bit

144977985
0025789: RNCC: 3 | RNVC: 2
025789: RNCC: 3 | RNVC: 2
3148510257891: RNCC: 5 | RNVC: 2
EX-008: RNCC: 5 | RNVC: 2
EX.008: RNCC: 5 | RNVC: 2
EX008: RNCC: 5 | RNVC: 2

20 Oct 1997

Load More Results