What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 79 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 79 of 110

5120-14-226-3126
Outil De Blocage Li

142263126
60290-01-40-010M3: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-363-7089
Socket Wrench Ratchet Attachment

143637089
160-888434-03: RNCC: 3 | RNVC: 2

6 Jul 1980

5120-14-493-9079
Cle

144939079
NO PRIMARY REF14-493-9079: RNCC: 3 | RNVC: 2
5000261427: RNCC: 5 | RNVC: 9
F300 0T 014 5305: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-201-0601

5120-14-402-0644
Manche En Bois

144020644
BEL0421: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-299-4510

5120-14-458-3113
Bearing And Bushing Remover

144583113
45215404: RNCC: 3 | RNVC: 2
45215404: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-352-3219
Sonde Inciden Outil

143523219
35MS018-02: RNCC: 3 | RNVC: 2
85-689-7648: RNCC: 6 | RNVC: 9

16 Oct 1978

5120-14-440-5460
Cle

144405460
51975: RNCC: 3 | RNVC: 2
85-694-1109: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-375-8042
Spanner Wrench

143758042
300A98789: RNCC: 3 | RNVC: 2
91371744: RNCC: 5 | RNVC: 2
300A98789: RNCC: 5 | RNVC: 2
300A98789: RNCC: 5 | RNVC: 9
300A98789: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-392-0865

5120-14-375-8033
Manual Control Lever

143758033
300A97158: RNCC: 3 | RNVC: 2
91371589: RNCC: 5 | RNVC: 2
300A97158: RNCC: 5 | RNVC: 2
300A97158: RNCC: 5 | RNVC: 9
300A97158: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-267-6595
Open End Wrench

142676595
5538868: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-375-8050
Spanner Wrench

143758050
300A97014: RNCC: 3 | RNVC: 2
91372594: RNCC: 5 | RNVC: 2
300A97014: RNCC: 5 | RNVC: 2
300A97014: RNCC: 5 | RNVC: 9
300A97014: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-315-1424
Spanner Wrench

143151424
2-73718: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-298-4540
Socket Head Screw Key

142984540
84.1/8: RNCC: 3 | RNVC: 2
3148511252604: RNCC: 5 | RNVC: 2
84 1-8: RNCC: 5 | RNVC: 2
0125260: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-576-2101
Socket Wrench

145762101
99C.6: RNCC: 3 | RNVC: 2
692385: RNCC: 5 | RNVC: 2
3148516923851: RNCC: 5 | RNVC: 2

6 Jun 2013

5120-14-417-0291
Outil Bloc Moyeu Av

144170291
8-0606AY: RNCC: 3 | RNVC: 2

30 Jun 1987

5120-14-314-8607
Crochet Extracteur

143148607
473-1: RNCC: 3 | RNVC: 2
3272670287877: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-508-5640
Spanner Wrench

145085640
P1108: RNCC: 3 | RNVC: 9

16 Sep 1998

5120-14-283-5144
Spanner Wrench

142835144
31462A: RNCC: 3 | RNVC: 9
31462: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-281-2993
Extracteur Boitier

142812993
C46944: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-571-5189
Bearing And Bushing Remover

145715189
T623J3002101: RNCC: 3 | RNVC: 2

2 Apr 2012

5120-14-409-5149
Releve Cote Outill

144095149
8814615000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-235-3914

5120-14-291-1164

5120-14-389-2498
Spanner Wrench

143892498
401272: RNCC: 3 | RNVC: 2
85-692-4014: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-229-2677
Matoir Pour Les Rub

142292677
VTR250-1095: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-280-9099
Spanner Wrench

142809099
Z51910: RNCC: 5 | RNVC: 2
Z51910: RNCC: 5 | RNVC: 9
5120-99-097-0140: RNCC: 6 | RNVC: 9
85-598-3981: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-335-9307
Pre-Sertissage Bloc

143359307
RPS3F6X0-8K: RNCC: 3 | RNVC: 2

24 Jul 1976

5120-14-508-3131
Spanner Wrench

145083131
332A93-4100-01: RNCC: 3 | RNVC: 2

2 Sep 1998

5120-14-288-6972
Spanner Wrench

142886972
D1553-4812: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-443-3551
Reducteur

144433551
GS70: RNCC: 3 | RNVC: 2

19 Nov 1990

5120-14-300-8894

5120-14-263-1273

5120-14-241-6063
Mandrin De Preserti

142416063
FF4X6MI: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-430-3472
Montage-Dem Mandrin

144303472
RT19727: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-425-3217
Connex Elec Plieuse

144253217
155: RNCC: 3 | RNVC: 2
91622700: RNCC: 5 | RNVC: 2

30 Jun 1988

5120-14-428-5228
Support Cle

144285228
MFG4392101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-303-6281

5120-14-354-6059
Broche Retenue Inve

143546059
972946: RNCC: 3 | RNVC: 2
972946: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-532-3261
Screwdriver Bit

145323261
ED.602T: RNCC: 3 | RNVC: 2
3148510227238: RNCC: 5 | RNVC: 2

30 Oct 2002

5120-14-207-4919

5120-14-514-8631
Internal Gripping Pipe Wrench

145148631
455791: RNCC: 3 | RNVC: 2

23 Jun 1999

5120-14-523-5462
Hydraulic Fitting Crimping Tool Head

145235462
DLT05PSHA3104: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-416-8143
Face Spanner Wrench Socket

144168143
4601BCA8010101: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-359-7538
Slip Joint Pliers

143597538
C58890: RNCC: 3 | RNVC: 2
100909: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-032-3075
Socket Head Screw Key

140323075
CMT20E5625: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-395-0721
Vise Jaw Caps

143950721
H46681: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-551-0149
Hand Tube Swaging Tool Kit

145510149
D21858: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-427-1490
Socket Head Screw Key

144271490
6252-54295: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-250-1737
Spanner Wrench

142501737
NO PRIMARY REF14-250-1737: RNCC: 3 | RNVC: 2
B4C317271: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-454-1171
Bearing Staking Installation Tool

144541171
6801A67-10-901: RNCC: 3 | RNVC: 2
85-694-6857: RNCC: 6 | RNVC: 9

19 Mar 1992

5120-14-438-0898
Spanner Wrench

144380898
NO PRIMARY REF14-438-0898: RNCC: 3 | RNVC: 2
287319: RNCC: 5 | RNVC: 9
287319: RNCC: 5 | RNVC: 9

7 Mar 1990

5120-14-451-0447
Toc Equipe

144510447
02640926500: RNCC: 3 | RNVC: 2
216182-00: RNCC: 5 | RNVC: 2

28 Oct 1991

5120-14-204-3029
Cle Speciale

142043029
M3-041: RNCC: 3 | RNVC: 2
M3-041: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-383-0901
Formage Tas

143830901
9970-121-223: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-317-7964
Spanner Wrench

143177964
NO PRIMARY REF14-317-7964: RNCC: 3 | RNVC: 2
842864-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-352-3175
Manuel Extracteur

143523175
MG019-24: RNCC: 3 | RNVC: 2
MG019-24: RNCC: 5 | RNVC: 2
MG0192400: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-490-6900
Holder

144906900
240 H 00548 880: RNCC: 3 | RNVC: 2
F300 0T 000 1013: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-378-6466
Cle Limiteur

143786466
20190414: RNCC: 3 | RNVC: 2
20190414: RNCC: 5 | RNVC: 9

11 Aug 1982

5120-14-249-9615

5120-14-221-0657

5120-14-249-6753
Poincon Special

142496753
2-02518: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-268-0632
Verin Type Ap

142680632
75AP2-6-2-2-1-80: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-468-2156
Socket Wrench Extension

144682156
S.228: RNCC: 3 | RNVC: 2
3148510579900: RNCC: 5 | RNVC: 2
0057990: RNCC: 5 | RNVC: 9

14 Feb 1994

5120-14-375-8095
Radiateur Ecarteur

143758095
16930119: RNCC: 3 | RNVC: 2
16930119: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-486-4454
Outillage Arme

144864454
RT13620: RNCC: 3 | RNVC: 2

21 Mar 1997

5120-14-214-8304

5120-14-202-2448

5120-14-268-1641
Wrench Kit

142681641
8810222000: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-425-6789
Quick Adjusting Screw Clamp

144256789
8811416000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-362-7517
Vise Jaw Caps

143627517
PR46620: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-270-8696
Open End Wrench

142708696
203028: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-420-5274
Speciale Pince

144205274
853-201-042-0: RNCC: 3 | RNVC: 2

10 Dec 1987

5120-14-341-2923

5120-14-566-9662
Hand Hammer

145669662
49014469: RNCC: 3 | RNVC: 2

21 Jan 2011

5120-14-440-2934
Detent Handling Tool

144402934
5000265050: RNCC: 3 | RNVC: 2
89409932: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-522-1020
Modifiee Cle

145221020
45271969: RNCC: 3 | RNVC: 2

4 Oct 2000

5120-14-298-1700
Flat Tip Screwdriver

142981700
250P4: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-537-4485
Socket Head Screw Key

145374485
82H.2H0P: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-554-6419
Open End Wrench

145546419
S662V5602101: RNCC: 3 | RNVC: 2

30 Jul 2007

5120-14-457-9930
Seal Inserter And Remover

144579930
547799: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-375-1162
Bloc Preformage

143751162
80007138: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-333-7364

5120-14-217-9977
Cle Dynamometrique

142179977
0D2-17: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-326-5900

5120-14-572-6178
Pole Extension

145726178
332A92-1195-10: RNCC: 3 | RNVC: 2
332A92119510: RNCC: 5 | RNVC: 2

17 Jul 2012

5120-14-430-1064
Sertissag Outillage

144301064
6232-54656: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-466-2555
Maintien Empreinte

144662555
0XB485-100-581-01: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-383-1199
Cone Demmanchement

143831199
8813094000: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-443-9763

5120-14-348-3830
Spanner Wrench

143483830
D47421: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-250-0117
Spanner Wrench

142500117
P02416: RNCC: 3 | RNVC: 2
0000330469: RNCC: 5 | RNVC: 2
0000330469: RNCC: 5 | RNVC: 9
330469: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-283-4957
Spanner Wrench

142834957
E306881: RNCC: 3 | RNVC: 2
E306881: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-544-2321
Ratchet Driven Jack

145442321
MAI 500 012: RNCC: 3 | RNVC: 2

12 Jan 2005

5120-14-242-5671
Spanner Wrench

142425671
875462: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-510-7688
Screwdriver Bit

145107688
EP.133T: RNCC: 3 | RNVC: 2
EP.133T: RNCC: 5 | RNVC: 2
3148510241500: RNCC: 5 | RNVC: 2
0614 122 53: RNCC: 5 | RNVC: 2

12 Nov 1998

5120-14-410-3680
Spanner Wrench

144103680
119.3/8: RNCC: 3 | RNVC: 2
119-3/8: RNCC: 5 | RNVC: 2
3148511342503: RNCC: 5 | RNVC: 2
SYB0344: RNCC: 5 | RNVC: 2
91601587: RNCC: 5 | RNVC: 2
91601587: RNCC: 5 | RNVC: 2
00.36.44.55: RNCC: 5 | RNVC: 2
RAB9539: RNCC: 5 | RNVC: 2
0134250: RNCC: 5 | RNVC: 9

18 Jun 1986

5120-14-282-9203
Socket Wrench Socket

142829203
J.20H: RNCC: 3 | RNVC: 2
3148510275208: RNCC: 5 | RNVC: 2
J20H: RNCC: 5 | RNVC: 2
0027520: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-362-4740
Bearing And Bushing Inserter

143624740
8810500002: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-306-4362
Socket Wrench Socket

143064362
8810600148: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-468-9809
Seal Inserter And Remover

144689809
40N108118-1: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-255-9984
Cle Pour Ecrou De C

142559984
24145002400: RNCC: 3 | RNVC: 2
145J24: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-516-7966
Cle A Creneaux

145167966
5000261442: RNCC: 3 | RNVC: 9

18 Oct 1999

5120-14-533-4068
Comprimeur

145334068
5000631012: RNCC: 3 | RNVC: 2

4 Feb 2003

5120-14-290-7591

5120-14-226-0017

5120-14-274-2443

5120-14-444-5588
Socket Wrench Socket

144445588
TB10511: RNCC: 3 | RNVC: 2

15 Jan 1991

5120-14-357-4335
Ring Retaining Pliers Tip Set

143574335
470.E5: RNCC: 3 | RNVC: 2
512132310: RNCC: 5 | RNVC: 2
3148511778807: RNCC: 5 | RNVC: 2
470E5: RNCC: 5 | RNVC: 2
SYQ0665: RNCC: 5 | RNVC: 2
0177880: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-524-7158
Outillage

145247158
217173-0: RNCC: 3 | RNVC: 2

5 Apr 2001

5120-14-561-2694
Special Purpose Combination Wrench

145612694
98F29003501000: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-216-4950

5120-14-223-4027

5120-14-241-6286
Cle Pour Ecrou Trai

142416286
1050-95-505-00: RNCC: 3 | RNVC: 2
95-505-00: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-524-1379
Cross Tip Screwdriver

145241379
AEFD-0X35: RNCC: 3 | RNVC: 2
AEFD0X35: RNCC: 5 | RNVC: 2

5 Mar 2001

5120-14-515-1513
Socket Wrench Screwdriver Attachment

145151513
ENFD6519-D50X100: RNCC: 3 | RNVC: 2
ENFD6519D50X100: RNCC: 3 | RNVC: 2

8 Jul 1999

5120-14-332-0129
Pliers

143320129
E73-141BECSC0URTS125: RNCC: 2 | RNVC: 2

2 Jul 1975

5120-14-373-6931
Capteur Pressio Cle

143736931
705085: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-273-8175

5120-14-292-3173

5120-14-274-7886

5120-14-507-7723
Contact Extracteur

5120-14-394-9243
Plateau Alveole

143949243
29740949: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-214-1845
Extracteur Darbre D

142141845
PR46133: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-225-9658
Cle Avec Butee Pour

142259658
21144900100: RNCC: 3 | RNVC: 2
144HL280: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-239-5219

5120-14-234-3348

5120-14-438-4448
Socket Wrench Extension

144384448
39387381: RNCC: 3 | RNVC: 2

21 Mar 1990

5120-14-387-5873
Piston Ring Compressor

143875873
DLP751790: RNCC: 3 | RNVC: 2
DLP000086: RNCC: 5 | RNVC: 2
DLT000086: RNCC: 5 | RNVC: 2
DLT00086: RNCC: 5 | RNVC: 9

15 Sep 1983

5120-14-532-3452
Retaining Ring Pliers

145323452
899755-01: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-444-3182
Combination Box And Open End Wrench

144443182
GS130-14: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-220-7892
Open End Wrench

142207892
RACD52: RNCC: 3 | RNVC: 2
RACD52: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-486-4099
Swivel Knob Jeweler's Screwdriver

144864099
ARE.2,5X21: RNCC: 3 | RNVC: 2
3148510109909: RNCC: 5 | RNVC: 2
1123806R00: RNCC: 5 | RNVC: 2
0613 460 07: RNCC: 5 | RNVC: 2
0010990: RNCC: 5 | RNVC: 9

18 Mar 1997

5120-14-530-5807
Bearing And Bushing Inserter And Remover

145305807
U.49AD7: RNCC: 3 | RNVC: 2
3148510702438: RNCC: 5 | RNVC: 2
U.49D7: RNCC: 5 | RNVC: 2

25 Jun 2002

5120-14-224-7479
Cross Tip Screwdriver

142247479
273-2: RNCC: 3 | RNVC: 2
233P2: RNCC: 3 | RNVC: 2
7413: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-529-9687
Socket Wrench Socket

145299687
J.10HLA: RNCC: 3 | RNVC: 2
00.46.27.68: RNCC: 5 | RNVC: 2
3148510273747: RNCC: 5 | RNVC: 2

24 Apr 2002

5120-14-416-7661
Rondelle Dappui

144167661
540668: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-238-2993

5120-14-350-5351
Offset Screwdriver

143505351
006-502-458: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-566-1203
Flat Tip Screwdriver

145661203
65-016: RNCC: 3 | RNVC: 2

20 Oct 2010

5120-14-515-5341
Final Drive Assembly Alignment Pin

145155341
150G4363: RNCC: 3 | RNVC: 2

21 Jul 1999

5120-14-324-8877
Roulements Et Guide

143248877
0-41102-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-410-3518
Spanner Wrench

144103518
8812268000: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-217-2709

5120-14-228-1594

5120-14-217-9990

5120-14-362-2153
Cle A Ergots Corps

143622153
PR1-47583-1: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-454-2955
Emmanchement Outil

144542955
MMG052-04: RNCC: 3 | RNVC: 2
MMG052-04: RNCC: 5 | RNVC: 2

26 Mar 1992

5120-14-425-0982
Flat Tip Screwdriver Set

144250982
3044A: RNCC: 3 | RNVC: 2
3044A: RNCC: 5 | RNVC: 2
85-693-6336: RNCC: 6 | RNVC: 9

21 Jun 1988

5120-14-212-9128
Cle Speciale Double

142129128
9970-115-169: RNCC: 3 | RNVC: 2
9970-115-169-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-362-6816
Jeu Demi-Bagues

143626816
9970-121-285: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-354-8995
Cle Concentrique

143548995
D47090: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-473-1775
Balayage Ensem Sous

144731775
2102714: RNCC: 3 | RNVC: 2

7 Dec 1994

5120-14-578-1468
Mechanical Puller

145781468
8812331006: RNCC: 3 | RNVC: 2

5 Nov 2013

5120-14-506-2375
Cle

145062375
C46256: RNCC: 3 | RNVC: 2

15 Apr 1998

5120-14-424-8090
Speciale Lame

144248090
804013: RNCC: 3 | RNVC: 2
804013: RNCC: 5 | RNVC: 9

9 Jun 1988

5120-14-224-9883

5120-14-242-4637

5120-14-491-6261
Cle

144916261
3AMX17X19: RNCC: 3 | RNVC: 2
F300 0T 003 7031: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-422-2365
Socket Head Screw Key

144222365
0372-42-10082: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-421-8233
Socket Wrench Socket

144218233
3215536: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-240-4206

5120-14-304-9107

5120-14-249-6771

5120-14-486-5627
Tas Special

144865627
RT13680: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-433-3316
Centrage Mandrin

144333316
541329: RNCC: 3 | RNVC: 2
00541329: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-234-3595

5120-14-315-1847
Griffe Dextracteur

143151847
0-51713-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-518-0253
Six Point Tip Screwdriver

145180253
ENFD6576-50X150: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-358-1753
Socket Head Screw Key

143581753
0404-00307: RNCC: 3 | RNVC: 2
0421-00404: RNCC: 5 | RNVC: 2

13 Aug 1979

5120-14-567-2479
Flat Tip And Cross Tip Screwdriver Set

145672479
AN.J5PB: RNCC: 3 | RNVC: 2
0795173: RNCC: 5 | RNVC: 2
3148517951730: RNCC: 5 | RNVC: 2

25 Feb 2011

5120-14-239-5197

5120-14-214-4144
Goujonniere Special

142144144
09-1215: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-569-3434
Plier Wrench

145693434
391.880: RNCC: 3 | RNVC: 2

6 Sep 2011

5120-14-208-9859

5120-14-246-7977

5120-14-460-7047
Bearing And Bushing Inserter And Remover

144607047
45057229: RNCC: 3 | RNVC: 2
45057229: RNCC: 5 | RNVC: 9

4 Feb 1993

5120-14-503-4683
Electronic Component Inserter And Remover

145034683
39338142: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-423-4246
Face Spanner Wrench Socket

144234246
248546: RNCC: 3 | RNVC: 2

19 Apr 1988

5120-14-326-4117
Screwdriver And Socket Wrench Combination

143264117
468707: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-553-1085
Spanner Wrench

145531085
1701381: RNCC: 3 | RNVC: 2

2 Mar 2007

5120-14-422-2473
Socket Head Screw Key

144222473
0506-400001: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-306-4216
Flat Tip Screwdriver

143064216
C46093: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-547-3999
Socket Wrench Socket

145473999
AER330152: RNCC: 3 | RNVC: 2

12 Oct 2005

5120-14-538-8795
Spring Inserter And Remover

145388795
NGM0022030200424: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-411-1035
Hole Sheet Metal Holder

144111035
BCME6X17: RNCC: 3 | RNVC: 2
BCME6X17: RNCC: 3 | RNVC: 2
BCME6VERT: RNCC: 5 | RNVC: 2

6 Aug 1986

5120-14-481-8940
Spanner Wrench

144818940
HSS831AHB229: RNCC: 3 | RNVC: 2
89167020: RNCC: 5 | RNVC: 2

6 Jun 1996

5120-14-299-8156
Spanner Wrench

142998156
000MA0595REP1: RNCC: 3 | RNVC: 2
000MA595REP1: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-268-1406

5120-14-462-3764
Spanner Wrench

144623764
BLC23076: RNCC: 3 | RNVC: 2

15 Apr 1993

5120-14-527-1733
Spanner Wrench

145271733
46251338: RNCC: 3 | RNVC: 2

10 Oct 2001

5120-14-462-2107
Socket Wrench Socket

144622107
206930A: RNCC: 3 | RNVC: 2
400794REP4: RNCC: 5 | RNVC: 2

15 Apr 1993

5120-14-462-2105
Socket Wrench Socket

144622105
206220D: RNCC: 3 | RNVC: 2
400795REP2: RNCC: 5 | RNVC: 2

15 Apr 1993

5120-14-510-8295
Open End Wrench

145108295
811660: RNCC: 3 | RNVC: 2

18 Nov 1998

5120-14-222-1418
Sheet Metalworking Dolly Block

142221418
305-95X67: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-271-0717

5120-14-234-3320
Contrecle Speciale

142343320
202414: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-330-3699
Bag Etanch Centreur

143303699
205240: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-380-2041
Socket Wrench Socket

143802041
SD-2: RNCC: 3 | RNVC: 2
SD2: RNCC: 3 | RNVC: 2
3272670254527: RNCC: 5 | RNVC: 2

8 Nov 1982

5120-14-515-8509
Cle A Creneaux

145158509
5000261552: RNCC: 3 | RNVC: 2

17 Aug 1999

5120-14-490-0703
Emmanchement Outil

144900703
OS22095: RNCC: 3 | RNVC: 2
0S22095: RNCC: 5 | RNVC: 2
OS22095: RNCC: 5 | RNVC: 2

10 Sep 1997

5120-14-408-4044
Valve Spring Compressor

144084044
U.43LA: RNCC: 3 | RNVC: 2
91729322: RNCC: 5 | RNVC: 2
5000269838: RNCC: 5 | RNVC: 2
3148510693507: RNCC: 5 | RNVC: 2
U43LA: RNCC: 5 | RNVC: 2
U43LA: RNCC: 5 | RNVC: 9
0069350: RNCC: 5 | RNVC: 9
U43L: RNCC: 5 | RNVC: 9

19 Mar 1986

5120-14-528-6747
Socket Head Screw Key

145286747
82H.3/4: RNCC: 3 | RNVC: 2
SYQ0759: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-488-3136
Socket Head Screw Key

144883136
84TZ.5: RNCC: 3 | RNVC: 2
0125647: RNCC: 5 | RNVC: 2
3148511256473: RNCC: 5 | RNVC: 2
84TZ5: RNCC: 5 | RNVC: 2
8032392M00: RNCC: 5 | RNVC: 2
18781001-3: RNCC: 5 | RNVC: 2
0715 33 21: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-483-8566
Bearing And Bushing Remover

144838566
0-30221-3: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-201-2190
Socket Wrench Socket

142012190
0055820: RNCC: 3 | RNVC: 2
S.1L: RNCC: 5 | RNVC: 2
S1L: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-289-1437
Open End Wrench

142891437
1-618: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-509-2767
Screwdriver Bit Holder

145092767
R.245: RNCC: 3 | RNVC: 2
R.245: RNCC: 5 | RNVC: 2

21 Oct 1998

5120-14-395-0703
Spanner Wrench

143950703
H46682: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-532-3253
Socket Wrench Socket

145323253
SJ.1/2: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-310-7347
Mandrin Pose Bague

143107347
188443: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-208-7278

5120-14-402-8151
Final Drive Assembly Alignment Pin

144028151
GARD299701005: RNCC: 3 | RNVC: 2

19 Jul 1985

5120-14-415-5817
Hand Storage Battery Carrier

144155817
120160: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-041-6958
Mechanical Puller Attachment

140416958
8811660000: RNCC: 3 | RNVC: 2
7M123DJ: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-212-9177
Cle Double Pour Rac

142129177
9970-115-050: RNCC: 3 | RNVC: 2
9970-115-050-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-286-2243
Torque Wrench Adapter

142862243
20.28: RNCC: 3 | RNVC: 2
20-28: RNCC: 5 | RNVC: 2
3148510936802: RNCC: 5 | RNVC: 2
MUP6119: RNCC: 5 | RNVC: 2
0093680: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-287-1106
Brad Awl

142871106
P0INC0NR0NDLAME50MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-287-1106: RNCC: 3 | RNVC: 2
P0INC0NR0NDLAME50MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-234-8312
Cle Speciale

142348312
31431: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-382-7617
Manchon Reducteur

143827617
900091: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-371-1576
Retaining Ring Pliers

143711576
469: RNCC: 3 | RNVC: 2
91634556: RNCC: 5 | RNVC: 2
3148515414503: RNCC: 5 | RNVC: 2
91588668: RNCC: 5 | RNVC: 2
2695 853 222: RNCC: 5 | RNVC: 2
0190329G00: RNCC: 5 | RNVC: 2
0541450: RNCC: 5 | RNVC: 9

5 Jun 1981

5120-14-329-5980
Diaphrag Adaptateur

143295980
C47687: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-373-1869
Cle Speciale

143731869
16380241: RNCC: 3 | RNVC: 2
16380241: RNCC: 5 | RNVC: 9

21 Oct 1981

5120-14-559-9141
Stud Inserter And Remover

145599141
MEASTRED02900: RNCC: 3 | RNVC: 2

4 Mar 2009

5120-14-570-6715
Open End Wrench

145706715
10-32X35N: RNCC: 3 | RNVC: 2

17 Jan 2012

5120-14-477-4427
Hand Helical Spring Puller Hook

144774427
835A: RNCC: 3 | RNVC: 2
3148512068457: RNCC: 5 | RNVC: 2
835.A: RNCC: 5 | RNVC: 2
1011877R00: RNCC: 5 | RNVC: 2
FACOM 835A: RNCC: 5 | RNVC: 2
0206845: RNCC: 5 | RNVC: 9
958 279 000 001: RNCC: 6 | RNVC: 9

30 Aug 1995

5120-14-338-4703
Outil Deverr Cloche

143384703
C46706: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-262-2681

5120-14-269-8861
Cle Blocage Tube

142698861
16929: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-490-6433
Socket Head Screw Key

144906433
83H.3: RNCC: 3 | RNVC: 2
3148511240311: RNCC: 5 | RNVC: 2
8034261W00: RNCC: 5 | RNVC: 2
91777979: RNCC: 5 | RNVC: 2
0715 31 19: RNCC: 5 | RNVC: 2
0124031: RNCC: 5 | RNVC: 9

8 Oct 1997

5120-14-558-0428
Cross Tip Screwdriver

145580428
ANP2X125: RNCC: 3 | RNVC: 2
91883653: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-458-3063
Pousse Tige Reglage

144583063
260999: RNCC: 3 | RNVC: 2

15 Oct 1992

5120-14-281-8218
Montage Dextraction

142818218
PR46682M4: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-279-6914

5120-14-249-5516
Faux Mors

142495516
PR46876: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-262-4486

5120-14-264-9583
Spanner Wrench

142649583
0296-78: RNCC: 3 | RNVC: 2
RA296: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-530-2080
Combination Box And Open End Wrench Set

145302080
MOD.40RPB: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-521-5305
Socket Wrench Socket

145215305
NSB.21: RNCC: 3 | RNVC: 2
NSB21: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-551-0077
Spanner Wrench

145510077
OM 97243: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-032-0403
Screwdriver Bit

140320403
BNAE-4MM: RNCC: 3 | RNVC: 2
0-01195: RNCC: 3 | RNVC: 2
2739-4: RNCC: 5 | RNVC: 2
AIC-BNAE4: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-401-4118
Bearing And Bushing Inserter

144014118
332A93-3222-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-283-1687
Cle Speciale

142831687
761-3M735P21: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-318-6245
Spanner Wrench

143186245
C46351: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-282-8788
Spanner Wrench

142828788
0565-78: RNCC: 3 | RNVC: 2
RA565: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-425-9625
Bearing And Bushing Inserter

144259625
6166: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-449-1825
Screwdriver Bit

144491825
ENX.230: RNCC: 3 | RNVC: 2
3148510239903: RNCC: 5 | RNVC: 2
0023990: RNCC: 5 | RNVC: 9

2 Aug 1991

5120-14-402-2035
Spanner Wrench

144022035
30AM045: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-486-4002
Socket Head Screw Key

144864002
322221106: RNCC: 3 | RNVC: 2

17 Mar 1997

5120-14-410-2618
Electrical Card Extractor

144102618
39150337: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-361-8475
Socket Wrench Socket

143618475
8812947000: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-411-9172
Caisse Outillage

144119172
14609690Y: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-307-6490
Support Demont Rotu

143076490
45335: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-299-6427
Douille Sertissage

142996427
FF6X1C: RNCC: 3 | RNVC: 2
0T1587: RNCC: 5 | RNVC: 2
FF4X6C: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-427-1168
Speciale Cle

144271168
540210: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-284-7453

5120-14-283-8564
Rodoir Pour Tige De

142838564
65MA404520: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-274-8339

5120-14-242-9514

5120-14-325-0585
Socket Wrench Socket

143250585
SBE229: RNCC: 3 | RNVC: 2
SBE229: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-535-7331
Spanner Wrench

145357331
8039202X00: RNCC: 3 | RNVC: 2

25 Jun 2003

5120-14-517-1629
Spanner Wrench

145171629
Z11100020: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-14-537-4431
Flat Tip Screwdriver

145374431
AXZF8X150: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-333-3220
Dresse-Tube

143333220
2201100: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-486-4449
Cle

144864449
RT11140: RNCC: 3 | RNVC: 2

21 Mar 1997

5120-14-491-0188
Entonno

144910188
4602 008 900 007: RNCC: 3 | RNVC: 2
F300 0T 001 0978: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-204-9622

5120-14-227-3151

5120-14-312-5332
Spanner Wrench

143125332
9970-195-000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-292-0400
Spanner Wrench

142920400
NO PRIMARY REF14-292-0400: RNCC: 3 | RNVC: 2
157441: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-517-3775
Bearing Staking Installation Tool

145173775
0XB101-243-000-19: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-517-3794
Bearing Staking Installation Tool

145173794
0XB101-681-801-17: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-545-4129
Hand Armament Subsystem Carrier

145454129
J600007: RNCC: 3 | RNVC: 2

12 Apr 2005

5120-14-537-4486
Socket Head Screw Key

145374486
82H.3H0P: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-395-0712
Spanner Wrench

143950712
H46696: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-503-4676
Electronic Component Inserter And Remover

145034676
39039185: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-411-2936
Electrical Card Extractor

144112936
3511 180 91581: RNCC: 3 | RNVC: 2
3511 180 91581: RNCC: 5 | RNVC: 2

6 Aug 1986

5120-14-545-9207
Spanner Wrench

145459207
S47018: RNCC: 3 | RNVC: 2

27 May 2005

5120-14-261-0379
Spanner Wrench

142610379
0596-78: RNCC: 3 | RNVC: 2
RA596: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-260-9716
Torque Wrench Adapter

142609716
M155: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-362-4744
Mechanical Puller Attachment

143624744
8810997001: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-340-5660
Outil Instal Commut

143405660
M01632-2: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-249-6793
Extracteur Special

142496793
2-02631: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-351-3640
Rotating Members Aligning Tool

143513640
7M123CA: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-508-3311
Spring Inserter And Remover

145083311
0458313S00: RNCC: 3 | RNVC: 2
SA 88-7-01 1052588K00: RNCC: 5 | RNVC: 2

4 Sep 1998

5120-14-399-1819
Socket Head Screw Key Set

143991819
63AN-8: RNCC: 3 | RNVC: 2
63AN8: RNCC: 3 | RNVC: 2
3272670228320: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-392-0860
Wrench Extension Handle

143920860
853-100-114-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-508-6099
Socket Head Screw Key

145086099
83H.3/16: RNCC: 3 | RNVC: 2
0124501: RNCC: 5 | RNVC: 2

22 Sep 1998

5120-14-393-0298
Open End Wrench

143930298
44-18X19CP: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-443-2220
Hand Terminal Crimping Tool

144432220
58074-1: RNCC: 3 | RNVC: 2
120-4477: RNCC: 5 | RNVC: 2
82-35022-46: RNCC: 5 | RNVC: 2
F300 0T 017 2827: RNCC: 5 | RNVC: 9
01-358-1269: RNCC: 6 | RNVC: 9

12 Nov 1990

5120-14-492-4418
Cle

144924418
5000607724: RNCC: 3 | RNVC: 2
F300 0T 007 6541: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-540-6604
Shock Type Wheel Stud Nut Wrench

145406604
1614002: RNCC: 3 | RNVC: 2

15 Apr 2004

5120-14-539-3122
Mechanical Puller Attachment

145393122
T636G3001224: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-391-4240
Flat Tip Screwdriver

143914240
HT.104: RNCC: 3 | RNVC: 2
0027079: RNCC: 5 | RNVC: 2
HT104: RNCC: 5 | RNVC: 2
3148510270791: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-436-0258
Preformed Packing Inserter

144360258
RT30073: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-554-2190
Retaining Ring Pliers

145542190
6000: RNCC: 3 | RNVC: 2

13 Jun 2007

5120-14-537-1241
Fixed Open End Wrench Set

145371241
585043: RNCC: 3 | RNVC: 2
(241)A1686585043: RNCC: 8 | RNVC: 2
585043: RNCC: 8 | RNVC: 2

1 Oct 2003

5120-14-279-8412
Embout Pour Tube Ca

142798412
8810563000: RNCC: 3 | RNVC: 2
0006101180: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-298-7908

5120-14-233-6934

5120-14-522-6701
Socket Wrench Extension

145226701
1056353N00: RNCC: 3 | RNVC: 2

15 Nov 2000

5120-14-534-0142
Leveling-Support Jack

145340142
50 09 13/99: RNCC: 3 | RNVC: 2

7 Mar 2003

5120-14-508-8456
Open End Box Wrench Set

145088456
42.JE5T: RNCC: 3 | RNVC: 2

30 Sep 1998

5120-14-491-0110
Boite

144910110
4602 006 400 002: RNCC: 3 | RNVC: 2
F300 0T 001 0895: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-498-9137
Cle

144989137
229339: RNCC: 3 | RNVC: 2
F300 0T 011 7806: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-359-6863
Spanner Wrench

143596863
VDP7557: RNCC: 3 | RNVC: 2

15 Oct 1979

5120-14-556-8831
Hand Armament Subsystem Carrier

145568831
502606: RNCC: 3 | RNVC: 2

17 Apr 2008

5120-14-205-6462
Bung Wrench

142056462
ECE/MAT 8120: RNCC: 3 | RNVC: 2
22930: RNCC: 3 | RNVC: 2
DCEA 6017: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-375-4918
Face Spanner Wrench Socket

143754918
DBE1: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-474-5775
Spanner Wrench

144745775
OU50636: RNCC: 3 | RNVC: 2

22 Feb 1995

5120-14-459-3262
Socket Head Screw Key

144593262
OS22693: RNCC: 3 | RNVC: 2
OS22693: RNCC: 5 | RNVC: 9

25 Nov 1992

5120-14-519-7800
Socket Wrench Socket

145197800
NS.19L: RNCC: 3 | RNVC: 2
0714 13 15: RNCC: 5 | RNVC: 2

5 Apr 2000

5120-14-236-2623

5120-14-370-6401

5120-14-325-0299
Regulateur Guide

143250299
0S21798: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-396-7180

5120-14-214-4127

5120-14-228-5131

5120-14-214-1486
Embout De Cle Dynam

142141486
C155: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-271-9790
Matrice De Sertissa

142719790
47821: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-228-5910

5120-14-340-8514

5120-14-362-7918

5120-14-564-9443
Bearing Staking Installation Tool

145649443
885565: RNCC: 3 | RNVC: 2

21 Jun 2010

5120-14-436-0302
Broche

144360302
RT32509: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-429-1506
Metallique Jet

144291506
548076: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-379-6027
Support Verin Hydra

143796027
26545906200: RNCC: 3 | RNVC: 2
265459062: RNCC: 5 | RNVC: 9

1 Oct 1982

5120-14-490-8816
Alene

144908816
4066 214 220 200: RNCC: 3 | RNVC: 2
F300 0T 000 5088: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-386-8737
Outil De Secours En

143868737
0140-095-102: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-557-2488
Mechanical Puller Adapter

145572488
U.53E12: RNCC: 3 | RNVC: 2
3148510703596: RNCC: 5 | RNVC: 2

27 May 2008

5120-14-569-9657
Mechanical Puller

145699657
2 0165-374: RNCC: 3 | RNVC: 2

7 Nov 2011

5120-14-490-6991
Wrench

144906991
241 W 01065 011: RNCC: 3 | RNVC: 2
F300 0T 000 1174: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-219-4109
Broche De Montage

142194109
17-9-34: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-253-6471
Extracteur Piston D

142536471
0326-78: RNCC: 3 | RNVC: 2
RA326: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-246-7002
Open End Wrench

142467002
10-26X29EC0: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-387-9806
Socket Wrench Crowfoot Attachment

143879806
853-100-069-0: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-278-3018

5120-14-566-7976
Oil Filter Wrench

145667976
U.48PL: RNCC: 3 | RNVC: 2
3148518272780: RNCC: 5 | RNVC: 2
827278: RNCC: 5 | RNVC: 2

20 Dec 2010

5120-14-277-9780

5120-14-225-3195

5120-14-461-6480
Inf. Demi-Couronne

144616480
PL1DA002OR901004B: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-411-1258
Chasse Connecteur

144111258
72824: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-530-2033
Socket Wrench Socket Set

145302033
JT.40: RNCC: 3 | RNVC: 2
3148515063602: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-365-0181
Socket Wrench Socket

143650181
S.19/32H: RNCC: 3 | RNVC: 2
S19-32H: RNCC: 5 | RNVC: 2
0715 13 36: RNCC: 5 | RNVC: 2
3148510548807: RNCC: 5 | RNVC: 2
0054880: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-387-1934
Socket Wrench Socket

143871934
MMJ0590302: RNCC: 3 | RNVC: 2
MMJ059-03-02: RNCC: 5 | RNVC: 2
MMJ059-03-02: RNCC: 5 | RNVC: 2
MMJ0590302: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-391-3470
Extract Roul Chaise

143913470
90890-06137: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-397-7234

5120-14-430-3469
Preformed Packing Inserter

144303469
RT18195: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-514-6702
Spanner Wrench

145146702
10000D20448: RNCC: 3 | RNVC: 2

8 Jun 1999

5120-14-261-0377
Spanner Wrench

142610377
0593-78: RNCC: 3 | RNVC: 2
RA593: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-425-6004
Casse-Ecrou

144256004
289.19: RNCC: 3 | RNVC: 2
3148511662823: RNCC: 5 | RNVC: 2
0166282: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-215-2410

5120-14-522-0227
Socket Wrench Socket

145220227
OCE83-30B: RNCC: 3 | RNVC: 2
131391: RNCC: 5 | RNVC: 2
0CE83-30B: RNCC: 5 | RNVC: 2

29 Sep 2000

5120-14-401-7068
Filtre Extracteur

144017068
0S22104: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-213-7054

5120-14-298-1856
Open End Wrench

142981856
30960: RNCC: 3 | RNVC: 2
10EC010X14: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-405-5077
Socket Wrench Socket

144055077
7337600: RNCC: 3 | RNVC: 2
73376: RNCC: 3 | RNVC: 9

27 Nov 1985

5120-14-281-2948
Cle A Ergots Ecrou

142812948
C46807: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-395-0771
Deffacement Outil

143950771
D1-21953-1000: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-436-0283
Butee

144360283
RT31372: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-563-1141
Socket Wrench Handle Bar

145631141
10682765000: RNCC: 3 | RNVC: 2

4 Jan 2010

5120-14-201-9869
Flat Tip Screwdriver

142019869
104-9: RNCC: 3 | RNVC: 2
1162-10X150: RNCC: 5 | RNVC: 2
1162-10-150: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-319-4548
Socket Wrench Socket

143194548
3130S98-04-026: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-200-8148
Adjustable Wrench

142008148
E74321-380NKB: RNCC: 2 | RNVC: 2

1 Jan 1962

5120-14-385-3496
Spanner Wrench

143853496
6811P32-6003-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-533-9279
Flat Tip Screwdriver

145339279
IF301-019: RNCC: 3 | RNVC: 9

5 Mar 2003

5120-14-242-9342
Craftsman's Tweezers

142429342
366-2: RNCC: 3 | RNVC: 2
366-14: RNCC: 3 | RNVC: 2
3272670237223: RNCC: 5 | RNVC: 2
2103-60-145: RNCC: 5 | RNVC: 9
332: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-403-8787
Spanner Wrench

144038787
N410-360: RNCC: 3 | RNVC: 2

28 Aug 1985

5120-14-431-4850
Socket Head Screw Key

144314850
0372-42-10092: RNCC: 3 | RNVC: 2

19 Apr 1989

5120-14-464-1527
Bearing And Bushing Remover

144641527
K2-156-01: RNCC: 3 | RNVC: 2

15 Jul 1993

5120-14-368-0743
Flat Tip Screwdriver

143680743
ACH.5,5X200: RNCC: 3 | RNVC: 2
0003930: RNCC: 5 | RNVC: 2
3148510039305: RNCC: 5 | RNVC: 2
AGN5-5X200: RNCC: 5 | RNVC: 2
91713017: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-489-6182
Open End Wrench

144896182
888-443-500-1: RNCC: 3 | RNVC: 2

6 Aug 1997

5120-14-259-9737
Adaptateur Special

142599737
PR47671: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-266-7002

5120-14-328-7067
Rotateur

143287067
26045133: RNCC: 3 | RNVC: 2
26427762: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-482-7531
Spanner Wrench

144827531
1104795C00: RNCC: 3 | RNVC: 2

25 Jul 1996

5120-14-554-0684
Octagonal Tip Screwdriver

145540684
0UT207: RNCC: 3 | RNVC: 2

8 Jun 2007

5120-14-432-8862
Socket Head Screw Crowfoot Wrench Attachment

144328862
M4Z7101943820: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-433-6103
Mechanical Puller Attachment

144336103
8815401004: RNCC: 3 | RNVC: 2
89411394: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-258-5977

5120-14-243-0465

5120-14-241-6082
Mandrin De Preserti

142416082
FF14X16MA: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-273-7094

5120-14-274-1796

5120-14-416-7501
Manutention Support

144167501
537264: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-444-9243
O.T. Ouverture Cont

144449243
1028198R00: RNCC: 3 | RNVC: 2

29 Jan 1991

5120-14-458-4913
Outil A Trepaner

144584913
548249: RNCC: 3 | RNVC: 2

23 Oct 1992

5120-14-332-6574
Extracteur Refriger

143326574
45352B: RNCC: 3 | RNVC: 2
45352: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-032-0404
Screwdriver Bit

140320404
0-01196: RNCC: 3 | RNVC: 2
2739-5: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-348-5105
Outi Regl Vann Elem

143485105
NO PRIMARY REF14-348-5105: RNCC: 3 | RNVC: 2
RT9146C1: RNCC: 5 | RNVC: 9

29 Mar 1978

5120-14-472-4425
Pliers

144724425
22329466-3: RNCC: 3 | RNVC: 2

25 Oct 1994

5120-14-495-3395
Cle

144953395
5001007656: RNCC: 3 | RNVC: 2
F300 0T 019 0922: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-326-2389
Plastique Jet

143262389
6055: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-478-3303
Cle Speciale

144783303
0894138X00: RNCC: 3 | RNVC: 2

25 Oct 1995

5120-14-389-2231
Deverrouilla Levier

143892231
TM20H32105: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-218-9341

5120-14-228-0787

5120-14-490-8875
Enclume

144908875
4067 140 000 372: RNCC: 3 | RNVC: 2
F300 0T 000 5147: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-516-8040
Poussoir

145168040
5001008695: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-316-1623
Mandr Demont Roulem

143161623
A127866: RNCC: 3 | RNVC: 2
100195: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-264-3441

5120-14-291-3455
Broche De Montage

142913455
172078: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-321-5674
Contre Clavette Inf

143215674
065-30-9005REP7: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-321-5579

5120-14-559-8358
Torque Wrench

145598358
91711900: RNCC: 3 | RNVC: 2

23 Feb 2009

5120-14-506-3980
Cle Reglage Culbute

145063980
OUT104106T: RNCC: 3 | RNVC: 2
4106T: RNCC: 5 | RNVC: 2

22 Apr 1998

5120-14-315-1836
Outil Repose Bague

143151836
0M343-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-245-2070
Pince A Sertir Conn

142452070
20053: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-274-0826
Socket Head Screw Key

142740826
63.3: RNCC: 3 | RNVC: 2
83.3: RNCC: 5 | RNVC: 2
3272670213562: RNCC: 5 | RNVC: 2
0124030: RNCC: 5 | RNVC: 2
83-3: RNCC: 5 | RNVC: 2
0223231A00: RNCC: 5 | RNVC: 2
63-3: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-419-7961
Electrical Contact Inserter

144197961
91042-1: RNCC: 3 | RNVC: 2

5 Nov 1987

5120-14-359-8118
Equip Pince Extract

143598118
0-704459-1-1: RNCC: 3 | RNVC: 2

15 Oct 1979

5120-14-244-8206
Flat Tip Screwdriver

142448206
AKT6X60: RNCC: 3 | RNVC: 2
225-1: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-342-8771
Quick Adjusting Screw Clamp

143428771
4-160: RNCC: 3 | RNVC: 2

16 May 1977

5120-14-532-1790
Screwdriver Bit

145321790
AMZ.S5,5-7: RNCC: 3 | RNVC: 2
3148510087740: RNCC: 5 | RNVC: 2

16 Oct 2002

5120-14-241-1505
Cle A Ergots Specia

142411505
0756-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-289-1433
Pointe Carree

142891433
1-688: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-430-3461
Fausse Vis

144303461
RT17545: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-397-7240

5120-14-204-9172

5120-14-204-9612

5120-14-347-7026
Screw Thread Insert Inserter

143477026
01500165700: RNCC: 3 | RNVC: 2
7552-041: RNCC: 5 | RNVC: 2
85-689-3318: RNCC: 6 | RNVC: 9

1 Mar 1978

5120-14-422-8386
Outillage Specialis

144228386
6202-330A11-0020-00: RNCC: 3 | RNVC: 2

22 Mar 1988

5120-14-479-0622
Craftsman's Tweezers

144790622
141.11: RNCC: 3 | RNVC: 2
141-11: RNCC: 5 | RNVC: 2
3148511375501: RNCC: 5 | RNVC: 2
0235176R00: RNCC: 5 | RNVC: 2
0137550: RNCC: 5 | RNVC: 9

13 Dec 1995

5120-14-218-8823
Hand Intrenching Tool

142188823
NO PRIMARY REF14-218-8823: RNCC: 3 | RNVC: 2
MLE1943ETS1-340D: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-522-7483
Poussoir De Siege

145227483
MAT171-0435F26: RNCC: 3 | RNVC: 2

20 Nov 2000

5120-14-578-6902
Hand Terminal Crimping Tool

145786902
445-611: RNCC: 3 | RNVC: 2

19 Dec 2013

5120-14-291-8138

5120-14-242-8705
Sellier Pince

142428705
779: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-241-4602

5120-14-410-3676
Screwdriver Bit

144103676
ES7: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-378-6468
Open End Wrench

143786468
20190433: RNCC: 3 | RNVC: 2
20190433: RNCC: 5 | RNVC: 9

11 Aug 1982

5120-14-395-0724
Vise Jaw Caps

143950724
H46697: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-463-3704
Open End Wrench

144633704
16849139: RNCC: 3 | RNVC: 2
16849139: RNCC: 5 | RNVC: 9

9 Jun 1993

5120-14-517-1526
Socket Wrench Adapter

145171526
10505047: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-14-301-5367
Inserted Hammer Face

143015367
EA.32: RNCC: 3 | RNVC: 2
3148510220208: RNCC: 5 | RNVC: 2
EA32: RNCC: 5 | RNVC: 2
0022020: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-510-7148
Socket Wrench Socket

145107148
STX.16: RNCC: 3 | RNVC: 2
0715 132 16: RNCC: 5 | RNVC: 2
STX16: RNCC: 5 | RNVC: 9

9 Nov 1998

5120-14-383-4760
Electrical Card Extractor

143834760
20198035: RNCC: 3 | RNVC: 2
20198035: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-438-2574
Screwdriver Bit Holder

144382574
NJ.236: RNCC: 3 | RNVC: 2
3148510362755: RNCC: 5 | RNVC: 2
NJ236: RNCC: 5 | RNVC: 2
1063278A00: RNCC: 5 | RNVC: 2
91711376: RNCC: 5 | RNVC: 2
0036275: RNCC: 5 | RNVC: 9

12 Mar 1990

5120-14-443-1733
Appareil Liaison Pa

144431733
522382HCAPREM2: RNCC: 3 | RNVC: 2

12 Nov 1990

5120-14-484-8634
Faux Arbre Demontag

144848634
NNP5120940026409: RNCC: 3 | RNVC: 2

12 Dec 1996

5120-14-333-3873
Tendeur Demi Carter

143333873
0070-101: RNCC: 3 | RNVC: 2
1101: RNCC: 5 | RNVC: 2
0070-101: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-428-5382
Arret Butee

144285382
MKG3262119: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-523-1338
Butee De Profondeur

145231338
317-50108: RNCC: 3 | RNVC: 2

8 Jan 2001

5120-14-442-2049
Socket Wrench Spanner Attachment

144422049
54250-2: RNCC: 3 | RNVC: 2
89280356: RNCC: 5 | RNVC: 2

3 Oct 1990

5120-14-315-1888
Mechanical Puller Attachment

143151888
0-700287-6: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-325-3121
Quick Adjusting Screw Clamp

143253121
501450: RNCC: 3 | RNVC: 2
501450: RNCC: 5 | RNVC: 9
501450: RNCC: 5 | RNVC: 9
85-686-1728: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-406-6192
Joints Emmanche

144066192
853-200-790-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-424-5679
Screwdriver Bit

144245679
ED.203: RNCC: 3 | RNVC: 2
3148510226637: RNCC: 5 | RNVC: 2
ED-203: RNCC: 5 | RNVC: 2
0022663: RNCC: 5 | RNVC: 9

31 May 1988

5120-14-394-4910
Cle Speciale

143944910
8942-623: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-368-0380
Screwdriver Bit

143680380
0025056: RNCC: 3 | RNVC: 2
3148510233840: RNCC: 5 | RNVC: 2
EH.205: RNCC: 5 | RNVC: 2
ET.205: RNCC: 5 | RNVC: 2
ETS5: RNCC: 5 | RNVC: 2

19 Jan 1981

5120-14-209-0855
Spanner Wrench

142090855
STG156912C: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-326-9156
Face Spanner Wrench Socket

143269156
468725: RNCC: 3 | RNVC: 2
468725: RNCC: 5 | RNVC: 2
LMT468725: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-534-1834
Mechanical Finger

145341834
82.6SP7260: RNCC: 3 | RNVC: 2

14 Mar 2003

5120-14-530-2314
Socket Wrench Screwdriver Attachment

145302314
94905038: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-264-9595
Spanner Wrench

142649595
0339-78: RNCC: 3 | RNVC: 2
RA339: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-527-0122
Socket Wrench Adapter

145270122
8034937L00: RNCC: 3 | RNVC: 2

24 Sep 2001

5120-14-354-9391

5120-14-530-4833
Bearing And Bushing Inserter

145304833
8818848000: RNCC: 3 | RNVC: 2

17 Jun 2002

5120-14-209-5128

5120-14-304-6738

5120-14-307-4579
Lifting Pneumatic Bag

143074579
67082: RNCC: 3 | RNVC: 2
120-12T: RNCC: 5 | RNVC: 2
85-021-3140: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-306-2889
Cle Ecrou Vis Dappu

143062889
43673: RNCC: 3 | RNVC: 2
43673: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-561-9665
Spanner Wrench

145619665
39587267: RNCC: 3 | RNVC: 2

21 Sep 2009

5120-14-280-3452

5120-14-318-5519

5120-14-255-2614
Spanner Wrench

142552614
D1557-60011: RNCC: 3 | RNVC: 2
D1557-60011: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-478-2776
Bearing And Bushing Remover

144782776
D05-0029: RNCC: 3 | RNVC: 2

18 Oct 1995

5120-14-550-8525
Adjustable Wrench

145508525
113A.18C: RNCC: 3 | RNVC: 2

21 Jul 2006

5120-14-396-9998

5120-14-387-7324
Electrical Card Extractor

143877324
20110559: RNCC: 3 | RNVC: 2
20110559: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-421-6307
Socket Wrench Crowfoot Attachment

144216307
210106: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-236-4026

5120-14-318-6465

5120-14-386-7606

5120-14-576-2311
Handling Tool Arm

145762311
9E030C: RNCC: 3 | RNVC: 2

7 Jun 2013

5120-14-214-4123

Load More Results