What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 78 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 78 of 110

5120-14-454-9360
Cross Tip Screwdriver Set

144549360
NO PRIMARY REF14-454-9360: RNCC: 3 | RNVC: 2
91743822: RNCC: 5 | RNVC: 2
0500242: RNCC: 5 | RNVC: 2
A.303J1: RNCC: 5 | RNVC: 2
A303J1: RNCC: 5 | RNVC: 2

29 Apr 1992

5120-14-274-7775
Flat Tip Screwdriver

142747775
E74-351-1-6X10X250BAI0NNETTE: RNCC: 2 | RNVC: 2
0003540: RNCC: 3 | RNVC: 2
AB.10X250: RNCC: 5 | RNVC: 2
AB10X250: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-393-4122
Socket Head Screw Key

143934122
64-M8: RNCC: 3 | RNVC: 2
81-8: RNCC: 3 | RNVC: 2
64 M8: RNCC: 3 | RNVC: 2
3148511225400: RNCC: 5 | RNVC: 2
3272670281042: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-388-2317
Spanner Wrench

143882317
VTR501-2-1111: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-382-7531
Open End Wrench

143827531
1-1038-02-63: RNCC: 3 | RNVC: 9

17 Feb 1983

5120-14-343-1873
Centreur Bagu Corps

143431873
205239: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-244-2419
Open End Wrench

142442419
BE13-13-15: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-514-1233
Six Point Tip Screwdriver

145141233
ENFD6566-2X12X200: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-497-8450
Six Point Tip Screwdriver

144978450
AZX.15X75: RNCC: 3 | RNVC: 2
3148510134635: RNCC: 5 | RNVC: 2
176-0876: RNCC: 5 | RNVC: 2
0613 255 15: RNCC: 5 | RNVC: 2
0613 256 15: RNCC: 5 | RNVC: 2
FACOMAZX.15X75: RNCC: 5 | RNVC: 9
0013463: RNCC: 5 | RNVC: 9

22 Oct 1997

5120-14-419-9378
Appareil Percage

144199378
530615: RNCC: 3 | RNVC: 2

10 Nov 1987

5120-14-231-7215
Tas Sertissage Rive

142317215
SPP6276: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-530-8553
Eta Base Pivotante

145308553
1223.150S: RNCC: 3 | RNVC: 2

9 Jul 2002

5120-14-299-6472
Rupteur Standard

142996472
01585070000: RNCC: 3 | RNVC: 2
35050711: RNCC: 5 | RNVC: 2
35050721: RNCC: 5 | RNVC: 2
35060922: RNCC: 5 | RNVC: 2
01585070000: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-389-2092

5120-14-417-4055
Outil Pompe Injecti

144174055
76545911900: RNCC: 3 | RNVC: 2
765459119: RNCC: 5 | RNVC: 9

8 Jul 1987

5120-14-264-7887
Blacksmith's Top Swage

142647887
647-10: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-208-1293

5120-14-297-1046

5120-14-556-1371
Terminal Crimping Tool Contact Positioner

145561371
282586: RNCC: 3 | RNVC: 2

5 Feb 2008

5120-14-219-2148

5120-14-353-2451
Mechanical Puller Attachment

143532451
NO PRIMARY REF14-353-2451: RNCC: 3 | RNVC: 2
19295785: RNCC: 5 | RNVC: 9

8 Dec 1978

5120-14-436-4816
Spanner Wrench

144364816
350A93-3200-20: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-426-5801
Socket Head Screw Key

144265801
NO PRIMARY REF14-426-5801: RNCC: 3 | RNVC: 2
D0951024: RNCC: 5 | RNVC: 9

8 Sep 1988

5120-14-480-9011
Combination Box And Open End Wrench

144809011
GS130-30: RNCC: 3 | RNVC: 2

11 Apr 1996

5120-14-442-3961
Spanner Wrench

144423961
Y075-059-000A: RNCC: 3 | RNVC: 2

15 Oct 1990

5120-14-463-4398
Terminal Crimping Tool Contact Positioner

144634398
8526-05: RNCC: 3 | RNVC: 2

14 Jun 1993

5120-14-240-0708
Cle Speciale

142400708
NO PRIMARY REF14-240-0708: RNCC: 3 | RNVC: 2
MR60CS143: RNCC: 5 | RNVC: 2
60CS143: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-291-3457
Bague Montage Defle

142913457
172121: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-396-1199
Tas Pour Mandrin

143961199
219912: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-244-3923

5120-14-334-8138

5120-14-371-2216

5120-14-472-1655
Retaining Ring Pliers

144721655
2928-250: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-447-6354
Slip Joint Pliers

144476354
102-28113-01: RNCC: 3 | RNVC: 2

29 May 1991

5120-14-280-9362
Cle Montage Buses

142809362
24545981500: RNCC: 3 | RNVC: 2
145J825-828: RNCC: 5 | RNVC: 9
245459815: RNCC: 5 | RNVC: 9
43192229: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-257-1794
Hand Screw Jack Extension

142571794
0855543800: RNCC: 3 | RNVC: 2
0855543800: RNCC: 5 | RNVC: 9
109B10: RNCC: 5 | RNVC: 9
1610: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-316-5016
Spanner Wrench

143165016
0U50082: RNCC: 3 | RNVC: 2
50082: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-396-7148
Spanner Wrench

143967148
C46526: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-313-5815
Socket Wrench Crowfoot Attachment

143135815
C47285: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-433-1402
Bearing And Bushing Inserter And Remover

144331402
45152553: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-431-7853
Socket Head Screw Key

144317853
0453-6089914: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-423-2869
Tap And Reamer Wrench

144232869
1543005: RNCC: 3 | RNVC: 2
2801038: RNCC: 5 | RNVC: 2
91618923: RNCC: 5 | RNVC: 2

14 Apr 1988

5120-14-246-2313

5120-14-383-1197
Cone Demmanchement

143831197
8813092000: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-219-2194
Extracteur Special

142192194
PR46965: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-221-8821

5120-14-383-1635

5120-14-031-5597
Outil Compress Ress

140315597
C47819: RNCC: 3 | RNVC: 2
85-691-0787: RNCC: 6 | RNVC: 9

14 Jun 1980

5120-14-237-4718
Douille De Montage

142374718
3130S95-68-032: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-480-9010
Combination Box And Open End Wrench

144809010
GS130-29: RNCC: 3 | RNVC: 2

11 Apr 1996

5120-14-205-8251

5120-14-452-5238
De Retreint Bague

144525238
D46809: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-411-2332
Cimblot De Montage

144112332
800B325200: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-572-8442
Socket Wrench Socket

145728442
120011: RNCC: 3 | RNVC: 2
7612206012324: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-485-5878
Support Joint

144855878
PL1NA003AA012614: RNCC: 3 | RNVC: 2

30 Jan 1997

5120-14-281-2911

5120-14-296-0473
Spanner Wrench

142960473
NO PRIMARY REF14-296-0473: RNCC: 3 | RNVC: 2
0690-00-1: RNCC: 5 | RNVC: 9
9690-00-001: RNCC: 5 | RNVC: 9
9690-00-1: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-446-8978
Torque Wrench Adapter

144468978
10.12: RNCC: 3 | RNVC: 2
10-12: RNCC: 5 | RNVC: 2
3148510925356: RNCC: 5 | RNVC: 2
8045426M00: RNCC: 5 | RNVC: 2
91629346: RNCC: 5 | RNVC: 2
0092535: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-228-0062
Open End Wrench

142280062
533-30: RNCC: 3 | RNVC: 2
533-30: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-509-9584
Open End Wrench

145099584
006-502-169: RNCC: 3 | RNVC: 2
5120AA1120814: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-507-7127

5120-14-529-2434

5120-14-565-8009
Combination Box And Open End Wrench

145658009
440.30: RNCC: 3 | RNVC: 2
123M7388: RNCC: 5 | RNVC: 2
3148517681750: RNCC: 5 | RNVC: 2
768175: RNCC: 5 | RNVC: 9
0768175: RNCC: 5 | RNVC: 9

23 Sep 2010

5120-14-495-5535
Cle

144955535
NO PRIMARY REF14-495-5535: RNCC: 3 | RNVC: 2
529 003 800: RNCC: 5 | RNVC: 9
F300 0T 019 4632: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-249-3948
Spanner Wrench

142493948
3210-97-31-100: RNCC: 3 | RNVC: 2
08-350: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-345-9747
Pliers

143459747
283: RNCC: 3 | RNVC: 2
85-687-3922: RNCC: 6 | RNVC: 9

5 Nov 1977

5120-14-244-9005
Open End Wrench

142449005
44-8X10CP: RNCC: 3 | RNVC: 2
474025: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-493-0698
Tournevis

144930698
22565-00-12: RNCC: 3 | RNVC: 2
F300 0T 009 8681: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-296-9127
Cle Speciale

142969127
000622003P: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-288-6886

5120-14-280-1698

5120-14-270-8691

5120-14-447-3962
Open End Wrench

144473962
45154001: RNCC: 3 | RNVC: 2

15 May 1991

5120-14-490-2077
Couple Verificateur

144902077
332A94-3100-00: RNCC: 3 | RNVC: 2

17 Sep 1997

5120-14-393-3041
Tournevis

143933041
5-1881D43127-140: RNCC: 3 | RNVC: 2
K0385-9035761: RNCC: 3 | RNVC: 2
K0385-5331P02: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-427-2050
Spherique Butee

144272050
46AM013-00-0009: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-483-1193
Socket Wrench Socket

144831193
J.11/16LA: RNCC: 3 | RNVC: 2
3148510283715: RNCC: 5 | RNVC: 2
0028371: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-389-2189
Serrage Cle

143892189
M34019: RNCC: 3 | RNVC: 2
85-692-3946: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-352-7177
Cambreur Dajustemen

143527177
348730: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-491-0076
Presse

144910076
4602 000 600 016: RNCC: 3 | RNVC: 2
F300 0T 001 0849: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-303-4407

5120-14-253-9728
Cone De Guidage

142539728
C46284: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-566-8359
Socket Wrench Socket

145668359
NK.34A: RNCC: 3 | RNVC: 2

3 Jan 2011

5120-14-414-8373
Cle De Demontage

144148373
MD98243: RNCC: 3 | RNVC: 9

12 Mar 1987

5120-14-238-6661

5120-14-357-2173

5120-14-286-2238
Open End Wrench

142862238
7-018302-4: RNCC: 3 | RNVC: 2
20.21: RNCC: 3 | RNVC: 2
20.21: RNCC: 5 | RNVC: 2
20-21: RNCC: 5 | RNVC: 2
0093610: RNCC: 5 | RNVC: 9
7-018302-4: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-216-5161
Socket Head Screw Key

142165161
0123440: RNCC: 3 | RNVC: 2
62 5-64: RNCC: 3 | RNVC: 2
62-5/64: RNCC: 3 | RNVC: 2
PL775811-2: RNCC: 5 | RNVC: 2
82 5-64: RNCC: 5 | RNVC: 2
82-5-64: RNCC: 5 | RNVC: 2
3272670231474: RNCC: 5 | RNVC: 2
82.5-64: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-319-4076
Fixed Open End Wrench Set

143194076
35-TR8-A: RNCC: 3 | RNVC: 2
35TR8A: RNCC: 3 | RNVC: 2
3272670264779: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-378-5603
Mechanical Puller Attachment

143785603
360A93-3400-21: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-484-6504
Socket Wrench Socket

144846504
NO PRIMARY REF14-484-6504: RNCC: 3 | RNVC: 2
3148510532929: RNCC: 5 | RNVC: 2
RB.12: RNCC: 5 | RNVC: 2
0053292: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-376-9640
Edge Grip Sheet Metal Holder

143769640
AF51: RNCC: 3 | RNVC: 9
AF51: RNCC: 5 | RNVC: 2
SERMAXAF51: RNCC: 5 | RNVC: 2
51AF: RNCC: 5 | RNVC: 9
85-692-1130: RNCC: 6 | RNVC: 9

28 Apr 1982

5120-14-393-8779
Bague De Retrait

143938779
NO PRIMARY REF14-393-8779: RNCC: 3 | RNVC: 2
OU134083: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-556-5037
Socket Wrench Socket

145565037
JTX.14: RNCC: 3 | RNVC: 2
438361: RNCC: 5 | RNVC: 2
3148510291796: RNCC: 5 | RNVC: 2

14 Mar 2008

5120-14-424-1363
Socket Head Screw Key

144241363
7062RVF1/1-150: RNCC: 2 | RNVC: 2

18 May 1988

5120-14-350-7182

5120-14-572-1717
Preformed Packing Remover

145721717
735498: RNCC: 3 | RNVC: 2

12 Jun 2012

5120-14-253-5274

5120-14-478-3017
Cle A Encoches

144783017
05597: RNCC: 3 | RNVC: 2

23 Oct 1995

5120-14-490-6962
Knife

144906962
241 K 00417 000: RNCC: 3 | RNVC: 2
F300 0T 000 1101: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-253-0019

5120-14-321-5578

5120-14-280-6612
Tige De Commande De

142806612
266583: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-461-4696
Cle Embout

144614696
5001008667: RNCC: 3 | RNVC: 2

10 Mar 1993

5120-14-274-7773
Flat Tip Screwdriver

142747773
E74-351-1-2X8X200BAI0NNETTE: RNCC: 2 | RNVC: 2
FRP32: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-326-0188
Bearing And Bushing Inserter

143260188
NO PRIMARY REF14-326-0188: RNCC: 3 | RNVC: 2
151934-2: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-415-2835
Spanner Wrench

144152835
3210-95-33-090-1: RNCC: 3 | RNVC: 2
85-616-1690: RNCC: 6 | RNVC: 9

28 Apr 1987

5120-14-465-4618
Bearing And Bushing Inserter And Remover

144654618
851-500-039-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-426-2901
Outil Pour Dipole

144262901
29683547: RNCC: 3 | RNVC: 2

18 Aug 1988

5120-14-508-8449
Socket Wrench Socket Set

145088449
1/4"PB.R1: RNCC: 3 | RNVC: 2

30 Sep 1998

5120-14-200-4430
Socket Wrench Socket

142004430
C-50: RNCC: 3 | RNVC: 2
C50: RNCC: 3 | RNVC: 2
3272670257481: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-406-6353

5120-14-406-6412

5120-14-272-3729
Open End Wrench

142723729
E74302R23-25BAW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-427-2176
Extracteur Etrier

144272176
46AM097-02: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-346-1685
Spanner Wrench

143461685
D1512-2236: RNCC: 3 | RNVC: 2
D1512-2236: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-463-7674
Spanner Wrench

144637674
428397V: RNCC: 3 | RNVC: 2
M4404-11: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-421-1391
Mise En Pla Matrice

144211391
CR700-15-4: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-544-5179
Socket Wrench Socket

145445179
K.7/8B: RNCC: 3 | RNVC: 2

8 Feb 2005

5120-14-254-2570

5120-14-285-6304
Spanner Wrench

142856304
4843P: RNCC: 3 | RNVC: 9
4843: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-217-9938
Torque Wrench Adapter

142179938
D015: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-540-0015
Socket Wrench Socket

145400015
6501DOC212019: RNCC: 3 | RNVC: 2

25 Feb 2004

5120-14-471-3031
Socket Wrench Socket

144713031
12472920X: RNCC: 3 | RNVC: 2

17 Aug 1994

5120-14-542-9625
Socket Wrench Adapter

145429625
809034: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-384-6258
Electrical Card Extractor

143846258
16928988: RNCC: 3 | RNVC: 2
16928988: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-550-2681
Eastern Pattern Scoop

145502681
292035: RNCC: 3 | RNVC: 2

14 Jun 2006

5120-14-422-2355
Socket Head Screw Key

144222355
0373-0U115068: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-400-6885
Spanner Wrench

144006885
0109-10-50-51-00-01: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-536-3648
Socket Wrench Adapter

145363648
44003647: RNCC: 3 | RNVC: 2

29 Jul 2003

5120-14-347-2797
Socket Head Screw Key

143472797
24510800600: RNCC: 3 | RNVC: 2
245108006: RNCC: 5 | RNVC: 9
604401: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-326-9155
Face Spanner Wrench Socket

143269155
468724: RNCC: 3 | RNVC: 2
468724: RNCC: 5 | RNVC: 2
LMT468724: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-340-6303
Screw Thread Insert Inserter

143406303
32071070: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-347-0228
Face Spanner Wrench Socket

143470228
C47850: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-458-6798
Pign Immobilisateur

144586798
574554: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-428-2567
Pliers

144282567
NO PRIMARY REF14-4282567: RNCC: 3 | RNVC: 2
387.18CPY: RNCC: 5 | RNVC: 2
91626657: RNCC: 5 | RNVC: 2
609-411: RNCC: 5 | RNVC: 2
0714 01 75: RNCC: 5 | RNVC: 2
T586-102: RNCC: 5 | RNVC: 2
3148511725603: RNCC: 5 | RNVC: 2
387-18CPY: RNCC: 5 | RNVC: 2
FACOM387.18CPY: RNCC: 5 | RNVC: 9
387-18CPY: RNCC: 5 | RNVC: 9

8 Dec 1988

5120-14-385-3349
Spanner Wrench

143853349
365A93-3207-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-261-9542
Cle De Serrage

142619542
NO PRIMARY REF14-261-9542: RNCC: 3 | RNVC: 2
61-11-408-912: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-218-6734

5120-14-219-2189

5120-14-219-2192

5120-14-425-9291
Mandrin Emmanchemen

144259291
600200: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-281-2922
Cone De Montage Joi

142812922
A0115617: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-262-2016

5120-14-269-5368

5120-14-220-8029

5120-14-367-1983
Rearmement Cle

143671983
915-3-92-32: RNCC: 3 | RNVC: 2

11 Dec 1980

5120-14-317-5643
Screwdriver Bit

143175643
I480-3: RNCC: 3 | RNVC: 2
I480-3: RNCC: 3 | RNVC: 2
XPB103-7: RNCC: 5 | RNVC: 9
1233: RNCC: 5 | RNVC: 9
85-069-1850: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-457-9553
Open End Wrench

144579553
853-100-281-0: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-479-9466
Bearing And Bushing Remover

144799466
888-356-900-1: RNCC: 3 | RNVC: 2

14 Feb 1996

5120-14-443-9365

5120-14-457-9953
Hole Sheet Metal Holder

144579953
548196: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-399-2077
Open End Wrench

143992077
10-34X35C: RNCC: 3 | RNVC: 2
91567370: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-476-9409
Bearing Staking Installation Tool

144769409
5001007799: RNCC: 3 | RNVC: 2

12 Jul 1995

5120-14-436-0284
Doseur Bloc Essais

144360284
RT31506: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-483-2285
Sertissage Embout

144832285
26-519-01: RNCC: 3 | RNVC: 2
26-519-08: RNCC: 5 | RNVC: 2

28 Aug 1996

5120-14-393-4128
Socket Head Screw Key

143934128
85-048: RNCC: 3 | RNVC: 2
3148511257609: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-349-0970
Spanner Wrench

143490970
B0277-004: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-530-2095
Combination Box And Open End Wrench

145302095
39.11/32: RNCC: 3 | RNVC: 2
3148510999142: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-323-9576
Flat Tip Screwdriver

143239576
S48: RNCC: 3 | RNVC: 2
98-304-415: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-263-8161

5120-14-362-3379
Serre-Cable Con Cle

143623379
S3W4121302401: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-246-8206

5120-14-422-2405
Roulement Appui

144222405
0373-0U115052-R2: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-511-5472
Cross Tip Screwdriver

145115472
AZPB.1X25: RNCC: 3 | RNVC: 2
13454: RNCC: 5 | RNVC: 2
3148510134543: RNCC: 5 | RNVC: 2
AZPB-1X25: RNCC: 5 | RNVC: 2

24 Dec 1998

5120-14-377-3556

5120-14-558-0387
Flat Tip Screwdriver

145580387
AN4X25: RNCC: 3 | RNVC: 2
91883635: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-289-1478

5120-14-290-8545

5120-14-311-3345

5120-14-328-3048
Spanner Wrench

143283048
0781-78: RNCC: 3 | RNVC: 2
0781-78: RNCC: 3 | RNVC: 2
85-679-7930: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-527-7152
Bearing And Bushing Inserter And Remover

145277152
888-490-200-1: RNCC: 3 | RNVC: 2

14 Nov 2001

5120-14-394-5158
Pince A Sertir

143945158
8400-1549: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-371-0420
Pliers

143710420
NO PRIMARY REF14-371-0420: RNCC: 3 | RNVC: 2
387.20CPY: RNCC: 5 | RNVC: 2
3148511725733: RNCC: 5 | RNVC: 2
387-20CPY: RNCC: 5 | RNVC: 2
0172573: RNCC: 5 | RNVC: 9
387: RNCC: 5 | RNVC: 9

5 Jun 1981

5120-14-541-6784
Socket Wrench Screwdriver Attachment

145416784
457-14539-000: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-495-3425
Wrench Kit

144953425
A13520-09: RNCC: 3 | RNVC: 2
A1352009: RNCC: 5 | RNVC: 2
F300 0T 019 0955: RNCC: 6 | RNVC: 9
F300 0T 019 3638: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-551-2503
Socket Wrench Screwdriver Attachment

145512503
D.105-8: RNCC: 3 | RNVC: 2

7 Sep 2006

5120-14-320-2581

5120-14-341-1280
Spanner Wrench

143411280
002498050P: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-392-0871

5120-14-264-8256

5120-14-375-8049
Spanner Wrench

143758049
300-459-800: RNCC: 3 | RNVC: 2
91372514: RNCC: 5 | RNVC: 2
300-459-800: RNCC: 5 | RNVC: 2
300-459-800: RNCC: 5 | RNVC: 9
300-459-800: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-361-6100
Spanner Wrench

143616100
16316878: RNCC: 3 | RNVC: 2
16316878: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-14-416-8103
Spanner Wrench

144168103
0M613: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-248-3548

5120-14-263-6479

5120-14-300-9656
Mechanical Puller Attachment

143009656
341A93-3512-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-349-3836
Socket Wrench Crowfoot Attachment

143493836
9970-115-557: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-393-0284
Combination Box And Open End Wrench

143930284
41.24: RNCC: 3 | RNVC: 2
3148511013717: RNCC: 5 | RNVC: 2
0184657T00: RNCC: 5 | RNVC: 2
91564528: RNCC: 5 | RNVC: 2
41-24: RNCC: 5 | RNVC: 2
0101371: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-373-1894
Spanner Wrench

143731894
HN45-50: RNCC: 3 | RNVC: 2
91505797: RNCC: 5 | RNVC: 2

21 Oct 1981

5120-14-222-1416
Sheet Metalworking Dolly Block

142221416
0303000601: RNCC: 3 | RNVC: 2
303-150X50: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-374-9646
Impact Type Bit Set And Handle Screwdriver

143749646
NJ.262: RNCC: 3 | RNVC: 2
NJ262: RNCC: 3 | RNVC: 2
NJ262: RNCC: 5 | RNVC: 2
1034762D00: RNCC: 5 | RNVC: 2
91634370: RNCC: 5 | RNVC: 2
3148515094255: RNCC: 5 | RNVC: 2
91601695: RNCC: 5 | RNVC: 2
0509425: RNCC: 5 | RNVC: 9
85-691-4436: RNCC: 6 | RNVC: 9

30 Jan 1982

5120-14-539-3149
Mechanical Puller Body

145393149
T651G3004121: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-452-0304
Torque Wrench Adapter

144520304
19-32: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-552-4486
Socket Wrench Socket

145524486
M21710: RNCC: 3 | RNVC: 2

3 Jan 2007

5120-14-394-7103
Spanner Wrench

143947103
DL506: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-394-8280
Mechanical Puller Attachment

143948280
M4ZS460D7133: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-317-4088
Open End Wrench

143174088
A16377062: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-377-6695
Electrical Card Extractor

143776695
16447006: RNCC: 3 | RNVC: 2
16447006: RNCC: 3 | RNVC: 9

10 Jun 1982

5120-14-287-1039
Open End Wrench

142871039
BB88: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-365-1193
Open End Wrench

143651193
254872: RNCC: 3 | RNVC: 2
254872: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-299-2984
Drift

142992984
28643: RNCC: 3 | RNVC: 2
28643: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-275-0214
Socket Head Screw Key Set

142750214
82JL8-4-6-8-10-12-14-16-18: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-423-2283
Basculeur Cle Dyn

144232283
0747163: RNCC: 3 | RNVC: 2
SP.1735 D-3-1120: RNCC: 5 | RNVC: 2
SP1735D-3-1120: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-369-4852
Emmanche Joints

143694852
851-500-450-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-565-7628
Retaining Ring Pliers

145657628
179A.13: RNCC: 3 | RNVC: 2
3148518230582: RNCC: 5 | RNVC: 2
0823058: RNCC: 5 | RNVC: 2

21 Sep 2010

5120-14-333-3837

5120-14-396-7112

5120-14-352-2754

5120-14-217-0037
Extracteur De Roule

142170037
ADC51947ATTAQUE: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-348-6260

5120-14-404-8669
Machoire

144048669
301291: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-338-4707
Outil Dever Support

143384707
C46707: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-215-2393
Extracteur Special

142152393
PR46750: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-376-2304

5120-14-492-0434
Socket Wrench Adapter-Extension

144920434
C8225000: RNCC: 3 | RNVC: 2
F300 0T 006 7551: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-575-8070
Face Spanner Wrench Socket

145758070
8819527002: RNCC: 3 | RNVC: 2

3 May 2013

5120-14-215-0222
Appareil A Cintrer

142150222
NO PRIMARY REF14-215-0222: RNCC: 3 | RNVC: 2
20759-2: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-378-5538
Bearing And Bushing Inserter

143785538
6803J34-1003-00: RNCC: 3 | RNVC: 2
6803360A34-1003-00: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-404-0873
Maintien Cle

144040873
853-100-166-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-352-7135
Screwdriver Bit

143527135
L-10: RNCC: 3 | RNVC: 2
L10: RNCC: 3 | RNVC: 2
3272670230651: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-401-0578

5120-14-422-9380

5120-14-406-6138

5120-14-464-9110
Maintien Empreinte

144649110
851-930-308-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-503-4818
Electronic Component Inserter And Remover

145034818
96136376: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-568-2118
Combination Box And Open End Wrench Set

145682118
467F.JP10: RNCC: 3 | RNVC: 2
3148518296441: RNCC: 5 | RNVC: 2
829644: RNCC: 5 | RNVC: 2

16 May 2011

5120-14-425-0359
Screwdriver Bit

144250359
804040: RNCC: 3 | RNVC: 2
804040: RNCC: 5 | RNVC: 9

16 Jun 1988

5120-14-376-0849
Open End Wrench

143760849
20387729: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-457-9779
Seal Inserter And Remover

144579779
530795: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-468-9836
Seal Inserter And Remover

144689836
40N108372: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-375-8055
Vise Jaw Caps

143758055
300A94223: RNCC: 3 | RNVC: 2
91372566: RNCC: 5 | RNVC: 2
300A94223: RNCC: 5 | RNVC: 2
300A94223: RNCC: 5 | RNVC: 9
300A94223: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-511-1378
Socket Head Screw Key Set

145111378
83SH.JP8U: RNCC: 3 | RNVC: 2
194-2719: RNCC: 5 | RNVC: 2
83SH.JP8U: RNCC: 5 | RNVC: 9

2 Dec 1998

5120-14-384-6299
Electrical Card Extractor

143846299
16928949: RNCC: 3 | RNVC: 2
16928949: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-201-6876
Stud Inserter And Remover

142016876
568PL14-26: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-427-0891
Speciale Cle

144270891
537378: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-270-6334

5120-14-326-9112

5120-14-220-8033

5120-14-476-2814
Extracteur De Cone

144762814
13602: RNCC: 3 | RNVC: 2
2008402: RNCC: 5 | RNVC: 2
13602: RNCC: 5 | RNVC: 9

1 Jun 1995

5120-14-551-1348
Socket Wrench Spanner Attachment

145511348
8400-30: RNCC: 3 | RNVC: 2
AA006706: RNCC: 6 | RNVC: 9

28 Aug 2006

5120-14-520-4895
Spanner Wrench

145204895
2P84519-00: RNCC: 3 | RNVC: 2

17 May 2000

5120-14-319-6878
Socket Wrench Crowfoot Attachment

143196878
G1-15-627: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-365-7696
Spanner Wrench

143657696
M435-915000: RNCC: 3 | RNVC: 2

8 Oct 1980

5120-14-481-4798
Pliers

144814798
NO PRIMARY REF14-481-4798: RNCC: 3 | RNVC: 2
RT30274: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-463-5328

5120-14-241-4839
Formoir Pour Cuir

142414839
724: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-443-7974
Cle

144437974
OU81475: RNCC: 3 | RNVC: 2
0U81475: RNCC: 5 | RNVC: 2

5 Dec 1990

5120-14-436-0288
Course Dispositif

144360288
RT32067: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-299-3572
Electrical Card Extractor

142993572
NO PRIMARY REF14-299-3572: RNCC: 3 | RNVC: 2
2-348-011: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-408-9611
Cle Embout

144089611
853-100-159-0: RNCC: 3 | RNVC: 2

9 Apr 1986

5120-14-444-7604
Cle De Serrage

144447604
0478-200004: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-223-8501
Cle De Manoeuvre

142238501
T86053M1A2P22: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-319-4920

5120-14-347-5634

5120-14-424-2322
Speciale De 14 Cle

144242322
426188: RNCC: 3 | RNVC: 2
426188: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-463-7681
Semelle Et Manchon

144637681
428401S: RNCC: 3 | RNVC: 2
M53053: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-240-5529

5120-14-375-1698
Open End Wrench

143751698
34-1/2: RNCC: 3 | RNVC: 2
34-1/2: RNCC: 5 | RNVC: 1
34-1-2: RNCC: 5 | RNVC: 2

30 Jan 1982

5120-14-370-2356
R Compression Outil

143702356
MGC310-21: RNCC: 3 | RNVC: 2
MGC310-21: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-469-9030
Flat Tip Screwdriver

144699030
AR.3,5X100VSE: RNCC: 3 | RNVC: 2
3148510099712: RNCC: 5 | RNVC: 2
163-0028: RNCC: 5 | RNVC: 2
FACOMAR.3,5X100VSE: RNCC: 5 | RNVC: 9
0009971: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-513-9724
Open End Wrench

145139724
ENFD29159-5X5-5: RNCC: 3 | RNVC: 2

21 Apr 1999

5120-14-423-2339
Basculeur Cle Dyn

144232339
SP2086D-3-490: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-232-1682
Open End Wrench

142321682
13 7-16X9-16: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-253-5101
Cle Reglage Butee D

142535101
M16-021: RNCC: 3 | RNVC: 2
M16-021: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-241-0266
Cle Pour Magneto

142410266
24091: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-316-1604
Outil Depose Joint

143161604
A130150: RNCC: 3 | RNVC: 2
100307: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-307-9559
Crochet Stand Outil

143079559
0341300: RNCC: 3 | RNVC: 2
CKD: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-461-6919
Patte Ancrage

144616919
PL1DA002OR902005B: RNCC: 3 | RNVC: 2

22 Mar 1993

5120-14-507-3244
Cle De Desacoupleme

145073244
10520933: RNCC: 3 | RNVC: 2

26 Jun 1998

5120-14-360-6719
Fourreau Chasse

143606719
000365043: RNCC: 3 | RNVC: 9

19 Dec 1979

5120-14-337-0060
Spanner Wrench

143370060
C46350M1: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-253-5834

5120-14-419-7940
Electrical Contact Inserter

144197940
S.0150.01: RNCC: 3 | RNVC: 2
S/0150/01: RNCC: 5 | RNVC: 2

23 Aug 2000

5120-14-385-5390
Outil D'installatio

143855390
610218-16: RNCC: 3 | RNVC: 2
610218-16: RNCC: 3 | RNVC: 9

26 Jul 1983

5120-14-357-3412
Spanner Wrench

143573412
E74-323-245A280: RNCC: 2 | RNVC: 2

7 Jun 1979

5120-14-224-7469
Flat Tip Screwdriver

142247469
BE79-05: RNCC: 3 | RNVC: 2
1543: RNCC: 5 | RNVC: 2
85-681-3811: RNCC: 6 | RNVC: 9

1 Jan 1966

5120-14-308-5689
Open End Wrench

143085689
E74302S5-5X7AS: RNCC: 2 | RNVC: 2

1 Jan 1974

5120-14-491-7647
Tournevis

144917647
3418530: RNCC: 3 | RNVC: 2
F300 0T 004 1700: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-245-1778

5120-14-530-4849
Spanner Wrench

145304849
8814835000: RNCC: 3 | RNVC: 2

17 Jun 2002

5120-14-436-0228
Preformed Packing Inserter

144360228
807631: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-042-3576
Pre-Sertissage Bloc

140423576
RMPS7F20X2M: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-279-6909

5120-14-559-6534
Seal Inserter

145596534
8816663000: RNCC: 3 | RNVC: 2

4 Feb 2009

5120-14-222-7119
Open End Wrench

142227119
34.4: RNCC: 3 | RNVC: 2
35-4X4: RNCC: 3 | RNVC: 2
146AF5/32X5/32: RNCC: 5 | RNVC: 2
3148510980201: RNCC: 5 | RNVC: 2
34-4: RNCC: 5 | RNVC: 2
0110726R00: RNCC: 5 | RNVC: 2
7187M4: RNCC: 5 | RNVC: 2
91492557: RNCC: 5 | RNVC: 2
0098020: RNCC: 5 | RNVC: 9
85-686-0396: RNCC: 6 | RNVC: 9

1 Jan 1966

5120-14-289-8454
Hand Terminal Crimping Tool

142898454
46988: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-527-8680
Bearing And Bushing Inserter And Remover

145278680
561624 80: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-233-6106

5120-14-228-5785

5120-14-384-6320
Electrical Card Extractor

143846320
16928937: RNCC: 3 | RNVC: 2
16928937: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-558-5254
Face Spanner Wrench Socket

145585254
14100024237: RNCC: 3 | RNVC: 2

13 Oct 2008

5120-14-448-9608
Jeu Cle Ergots

144489608
126.E180: RNCC: 3 | RNVC: 2
126 E180: RNCC: 5 | RNVC: 2
3148511347362: RNCC: 5 | RNVC: 2
0134736: RNCC: 5 | RNVC: 9

24 Jul 1991

5120-14-218-6714

5120-14-200-4651

5120-14-217-5728
Hand Terminal Crimping Tool

142175728
8457: RNCC: 3 | RNVC: 2
5M8938-220-43: RNCC: 5 | RNVC: 2
8457A: RNCC: 5 | RNVC: 2
8457: RNCC: 5 | RNVC: 2
2-03850: RNCC: 5 | RNVC: 2
91492561: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-530-5479
Mechanical Puller Attachment

145305479
U.15-05: RNCC: 3 | RNVC: 2
3148510663753: RNCC: 5 | RNVC: 2

20 Jun 2002

5120-14-404-9222
Outillage Mallette

144049222
853-201-552-0: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-031-7532

5120-14-327-7570
Mecaniqu Redresseur

143277570
M208446: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-241-6015

5120-14-374-6343
Mandrin De Montage

143746343
408515: RNCC: 3 | RNVC: 2
BGE408515: RNCC: 5 | RNVC: 2

30 Jan 1982

5120-14-430-3459
Serrag Cle Speciale

144303459
RT17398: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-407-2041
Puit De Bougie Cle

144072041
100670: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-473-7291
Mechanical Puller Attachment

144737291
94249: RNCC: 3 | RNVC: 2
FI 39 STCM: RNCC: 4 | RNVC: 1
EA20106: RNCC: 5 | RNVC: 2

10 Jan 1995

5120-14-317-6382
Flat Tip Screwdriver

143176382
TD739P7: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-503-5132
Socket Wrench Socket Set

145035132
SP.9100: RNCC: 3 | RNVC: 2

16 Jan 1998

5120-14-297-2990
Screw Thread Insert Inserter

142972990
01500283700: RNCC: 3 | RNVC: 2
32041910: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-530-5826
Six Point Tip Screwdriver

145305826
263MPT40: RNCC: 3 | RNVC: 2

26 Jun 2002

5120-14-363-6035

5120-14-463-2668
Electronic Component Inserter And Remover

144632668
45619897: RNCC: 3 | RNVC: 9

7 Jun 1993

5120-14-279-5895

5120-14-490-8878
Etampe

144908878
4067 150 001 196: RNCC: 3 | RNVC: 2
F300 0T 000 5150: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-406-5642

5120-14-578-5151
Flat Tip And Cross Tip Screwdriver Set

145785151
ADVE.J6PB: RNCC: 3 | RNVC: 2
3148517992542: RNCC: 5 | RNVC: 2

5 Dec 2013

5120-14-316-6639

5120-14-564-9396
Mechanical Puller

145649396
885563: RNCC: 3 | RNVC: 2

21 Jun 2010

5120-14-432-3823
Outillage Mandrin

144323823
541512: RNCC: 3 | RNVC: 2
0000541512: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-518-7155
Epingle A Boulons

145187155
202425521240: RNCC: 3 | RNVC: 2

16 Feb 2000

5120-14-461-3320
Tube Rallonge

144613320
30761-1/8IN: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-14-393-7012
Spanner Wrench

143937012
HN7: RNCC: 3 | RNVC: 2
SKFHN7: RNCC: 5 | RNVC: 9

7 Jun 1984

5120-14-362-1740
Coupelle Dappui

143621740
C47837: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-241-6078

5120-14-436-0270
Preformed Packing Inserter

144360270
RT30291: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-434-3268
Spanner Wrench

144343268
EMH141378J: RNCC: 3 | RNVC: 2
EMH141378J: RNCC: 5 | RNVC: 9

20 Sep 1989

5120-14-425-6791
Seal Inserter And Remover

144256791
8811424000: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-362-7537

5120-14-228-5191

5120-14-220-8196

5120-14-491-0100
Baladeu

144910100
4602 004 300 006: RNCC: 3 | RNVC: 2
F300 0T 001 0879: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-404-2356
Poussoir Interbague

144042356
25545873600: RNCC: 3 | RNVC: 2
255458736: RNCC: 5 | RNVC: 9
43282658: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-222-6162

5120-14-343-7053
Open End Wrench

143437053
44.5,5X7: RNCC: 3 | RNVC: 2
44-5-5X7: RNCC: 5 | RNVC: 2
44.5-5X7: RNCC: 5 | RNVC: 2
91450071: RNCC: 5 | RNVC: 2
250-4655: RNCC: 5 | RNVC: 2
44.5,5X7: RNCC: 5 | RNVC: 2
3059002240: RNCC: 5 | RNVC: 2
479926J: RNCC: 5 | RNVC: 2
0102364: RNCC: 5 | RNVC: 9
FACOM44.5,5X7: RNCC: 5 | RNVC: 9

13 Jul 1977

5120-14-566-3827
Socket Wrench Attachment Universal Joint

145663827
730010S162-00B: RNCC: 3 | RNVC: 2

9 Nov 2010

5120-14-323-9136
Pose Ecrou-Rivet A

143239136
23521000000: RNCC: 3 | RNVC: 2
M307: RNCC: 5 | RNVC: 2
85-638-5640: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-488-3122
Socket Head Screw Key

144883122
82H.9/64: RNCC: 3 | RNVC: 2
82H9-64: RNCC: 5 | RNVC: 2
0715 311 30: RNCC: 5 | RNVC: 2
0123521: RNCC: 5 | RNVC: 2
3148511235218: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-339-1788
Open End Wrench

143391788
3210-95-55-001: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-248-0437
Pince Pose-Agrafes

142480437
NO PRIMARY REF14-248-0437: RNCC: 3 | RNVC: 2
PINCETYPA: RNCC: 5 | RNVC: 9
A: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-529-1896
Arretoir De Chemise

145291896
9996272-2: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-532-2527
Socket Wrench Socket

145322527
J.7/8LA: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-338-4781
Spanner Wrench

143384781
C46318-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-463-0648
Socket Wrench Socket

144630648
2-45248: RNCC: 3 | RNVC: 2

17 May 1993

5120-14-566-9810
Torque Wrench

145669810
R.306-5: RNCC: 3 | RNVC: 2
3148518092135: RNCC: 5 | RNVC: 2
809213: RNCC: 5 | RNVC: 2

24 Jan 2011

5120-14-313-7260

5120-14-313-4682
Rallonge Verrouilla

143134682
WA.1122: RNCC: 3 | RNVC: 2
3148510789200: RNCC: 5 | RNVC: 2
WA1122: RNCC: 5 | RNVC: 2
0078920: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-421-6316
Gabarit De Calage

144216316
215904: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-263-2690

5120-14-209-4222

5120-14-313-7244
Cle De Maintien

143137244
C47063: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-241-3373
Cle Speciale

142413373
PR46926: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-311-7458
Open End Wrench

143117458
6800-1053: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-299-7273
Spanner Wrench

142997273
1-1038-02-50: RNCC: 3 | RNVC: 2
1-1038-02-50: RNCC: 5 | RNVC: 9
1-1038-02-50: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-523-0524
Spanner Wrench

145230524
Y075-064-000B: RNCC: 3 | RNVC: 2

20 Dec 2000

5120-14-524-5390
Torque Wrench Adapter

145245390
SP.3939: RNCC: 3 | RNVC: 2
SP-3939: RNCC: 5 | RNVC: 2

21 Mar 2001

5120-14-257-2903
Assemblage De Pale

142572903
FH152-907: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-338-4802
Cone De Montage

143384802
S16-0607-0902: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-435-2349
Allumage Cala Outil

144352349
700096: RNCC: 3 | RNVC: 2

31 Oct 1989

5120-14-253-9762
Crochet Appui Cric

142539762
C48256: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-506-6442
Cle Ouvert. Boitier

145066442
WZ0006: RNCC: 3 | RNVC: 2

5 May 1998

5120-14-463-1807
Valve Spring Lifter

144631807
0066200+0066115: RNCC: 3 | RNVC: 2
U.13L+U.13DB: RNCC: 5 | RNVC: 2
4024T: RNCC: 5 | RNVC: 2

26 May 1993

5120-14-274-5177
Matrice Pince A Ser

142745177
45503: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-220-8423

5120-14-395-0706
Spanner Wrench

143950706
H46685: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-317-3951
Electrical Contact Remover

143173951
20674M: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-296-0271

5120-14-488-5534
Socket Wrench Socket

144885534
J.17LA: RNCC: 3 | RNVC: 2
1780551165: RNCC: 5 | RNVC: 2
TA5006P013: RNCC: 5 | RNVC: 2
3148510280912: RNCC: 5 | RNVC: 2
J17LA: RNCC: 5 | RNVC: 2
0216562A00: RNCC: 5 | RNVC: 2
0028091: RNCC: 5 | RNVC: 9

21 May 1997

5120-14-532-1789
Screwdriver Bit

145321789
AMZ.S4-6,5: RNCC: 3 | RNVC: 2
3148510087733: RNCC: 5 | RNVC: 2

16 Oct 2002

5120-14-250-5577

5120-14-417-4659
Controle Outil

144174659
1824676: RNCC: 3 | RNVC: 9

8 Jul 1987

5120-14-482-1449
Spanner Wrench

144821449
PR46613: RNCC: 3 | RNVC: 2

20 Jun 1996

5120-14-555-6012
Socket Wrench Spanner Attachment

145556012
14415: RNCC: 3 | RNVC: 2

30 Nov 2007

5120-14-473-4742
Flat Tip Screwdriver

144734742
AY.8X150: RNCC: 3 | RNVC: 2
3148510133805: RNCC: 5 | RNVC: 2
AY8X150: RNCC: 5 | RNVC: 2
0013380: RNCC: 5 | RNVC: 9

31 Dec 1994

5120-14-447-9988
Retaining Ring Installation Tool

144479988
A37648W: RNCC: 3 | RNVC: 2

12 Jun 1991

5120-14-363-5822
Spanner Wrench

143635822
125.50: RNCC: 3 | RNVC: 2
0134654: RNCC: 5 | RNVC: 2
125-50: RNCC: 5 | RNVC: 2

9 May 1980

5120-14-490-4636
Casse-Ecrous

144904636
STN-2432P: RNCC: 3 | RNVC: 9

2 Oct 1997

5120-14-459-2598
Emmanchement Outil

144592598
MMG047-79: RNCC: 3 | RNVC: 2
MMG047-79: RNCC: 5 | RNVC: 2

19 Nov 1992

5120-14-519-1422
Open End Wrench

145191422
35AM040: RNCC: 3 | RNVC: 2

9 Mar 2000

5120-14-397-0830
Spanner Wrench

143970830
OU50424: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-387-8638
Face Spanner Wrench Socket

143878638
OU50383: RNCC: 3 | RNVC: 2
0U50383: RNCC: 5 | RNVC: 2

12 Oct 1983

5120-14-232-7988
Socket Wrench Socket

142327988
15137T6: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-375-3210
Valve Spring Lifter

143753210
A33284D: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-435-2353
Mechanical Puller Attachment

144352353
TB2040201: RNCC: 3 | RNVC: 2
700001: RNCC: 5 | RNVC: 9

31 Oct 1989

5120-14-251-2347

5120-14-458-6907
Spanner Wrench

144586907
60920547: RNCC: 3 | RNVC: 2
89467838: RNCC: 5 | RNVC: 2

29 Oct 1992

5120-14-242-4794
Open End Wrench

142424794
590: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-508-0199
Open End Wrench

145080199
1290GM: RNCC: 3 | RNVC: 2
1911060130: RNCC: 5 | RNVC: 9

26 Aug 1998

5120-14-482-7530
Spanner Wrench

144827530
1104794B00: RNCC: 3 | RNVC: 2

25 Jul 1996

5120-14-315-2831
Spanner Wrench

143152831
24C9135: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-272-3590
Spanner Wrench

142723590
E74323A20AGW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-250-0477
Fixed Open End Wrench Set

142500477
31JE12T: RNCC: 3 | RNVC: 2
31: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-444-8294
Cle De Serrage

144448294
0478-203122: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-338-9015
Socket Wrench Socket

143389015
8811941000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-541-8977
Socket Wrench Socket

145418977
46831839: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-445-5870
Verificat Outillage

144455870
4609VEA: RNCC: 3 | RNVC: 2

18 Feb 1991

5120-14-411-9192
Outillage Controle

144119192
27980160: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-322-3461

5120-14-295-2648

5120-14-316-6738

5120-14-234-4285
Poignee De Manoeuvr

142344285
17899TREP9: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-295-6384

5120-14-285-1214
Cle

142851214
0M97729: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-416-7659
Mandrin Presse

144167659
540666: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-565-0364
Hand Hydraulic Jack

145650364
VE70: RNCC: 3 | RNVC: 2

1 Jul 2010

5120-14-308-3263

5120-14-270-9306

5120-14-285-5940

5120-14-383-5142
Electrical Card Extractor

143835142
16928995: RNCC: 3 | RNVC: 2
16928995: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-441-1996
Terminal Crimping Tool Contact Positioner

144411996
R073020123: RNCC: 3 | RNVC: 2
91711055: RNCC: 5 | RNVC: 2
73020123: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-388-0106
Electrical Contact Remover

143880106
R282946: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-222-7395
Open End Wrench

142227395
20-5X4: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-326-4294
Electrical Card Extractor

143264294
468774: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-506-7237
Face Spanner Wrench Socket

145067237
IT259OSV: RNCC: 3 | RNVC: 2

13 May 1998

5120-14-334-6517

5120-14-490-2020
Cambreur

144902020
CP0U6088: RNCC: 3 | RNVC: 9
5120AA2009676: RNCC: 6 | RNVC: 9

17 Sep 1997

5120-14-462-9847
Distributeur Ve Cle

144629847
T700A3299000005: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-352-3143
Sertis Palier Outil

143523143
MFE307-41: RNCC: 3 | RNVC: 2
MFF307-21: RNCC: 5 | RNVC: 2
MFE307-41: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-329-6393
Spanner Wrench

143296393
MHJ105-21: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-376-0486
Spanner Wrench

143760486
TMY20-49-302: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-368-5974
Spanner Wrench

143685974
SPE125S004: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-466-4117
Spanner Wrench

144664117
46AM118: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-313-7273
Faux Mors

143137273
C47030: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-326-2528

5120-14-344-3803
Spanner Wrench

143443803
94AM010: RNCC: 3 | RNVC: 2
16848185: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-459-1636
Bearing Staking Installation Tool

144591636
45215115: RNCC: 3 | RNVC: 2
45215115: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-530-7136
Cross Tip Screwdriver

145307136
13416: RNCC: 3 | RNVC: 2
3148510134161: RNCC: 5 | RNVC: 2
AZDB.2X40: RNCC: 5 | RNVC: 2

3 Jul 2002

5120-14-380-8379
Spanner Wrench

143808379
C46008: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-425-9624
Bearing And Bushing Inserter

144259624
6165: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-440-2984
Square Tip Screwdriver

144402984
7380: RNCC: 3 | RNVC: 2
91638503: RNCC: 5 | RNVC: 2

11 Jul 1990

5120-14-468-9714
Mattock-Pick Handle

144689714
117076: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-356-1896
Open End Wrench

143561896
187541: RNCC: 3 | RNVC: 2

25 Apr 1979

5120-14-521-7019
Handling Tool Arm

145217019
160-88917: RNCC: 3 | RNVC: 2

6 Sep 2000

5120-14-203-1380
Socket Wrench Socket

142031380
K58: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-477-5036
Electrical Contact Remover

144775036
1109651R00: RNCC: 3 | RNVC: 2

7 Sep 1995

5120-14-426-8256
Socket Head Screw Key

144268256
0419-05154: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-306-4355
Spanner Wrench

143064355
8810275001: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-282-9216
Socket Wrench Handle Bar

142829216
78C125: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-441-9968
Bearing And Bushing Inserter And Remover

144419968
177117: RNCC: 3 | RNVC: 2

26 Sep 1990

5120-14-480-3887
Screwdriver Bit

144803887
619912: RNCC: 3 | RNVC: 2
619912: RNCC: 5 | RNVC: 9

7 Mar 1996

5120-14-427-0603
Socket Wrench Socket

144270603
M4Z6021902201: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-329-5957
Face Spanner Wrench Socket

143295957
C47410: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-313-7263
Open End Wrench

143137263
C47510: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-526-1558
Open End Wrench

145261558
132192: RNCC: 3 | RNVC: 2

4 Jul 2001

5120-14-442-9430
Detent Handling Tool

144429430
16741079: RNCC: 3 | RNVC: 2

7 Nov 1990

5120-14-538-3663
Spanner Wrench

145383663
NGM0010036234011: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-375-2855
Hog Ring Staple Pliers

143752855
147206: RNCC: 3 | RNVC: 9
147206: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-537-6021
Open End Wrench

145376021
13A-13X15: RNCC: 3 | RNVC: 2

12 Nov 2003

5120-14-387-3098
Open End Wrench

143873098
10CP24X27: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-283-4955
Spanner Wrench

142834955
0306879: RNCC: 3 | RNVC: 2
0306879: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-429-1484
Outillage Mandrin

144291484
540570: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-520-8229
Flat Tip Screwdriver

145208229
10624734: RNCC: 3 | RNVC: 2

14 Jun 2000

5120-14-532-9629
Combination Box And Open End Wrench

145329629
40R.10: RNCC: 3 | RNVC: 2
3148511011829: RNCC: 5 | RNVC: 2
40R.10: RNCC: 5 | RNVC: 2

14 Jan 2003

5120-14-204-9149

5120-14-255-2934

5120-14-238-5431

5120-14-379-3637
A Fourch Tournevis

143793637
004329005P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-327-0993
Purge B V Outillage

143270993
321A96-0035-00: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-441-3850
Daxe Extracteur

144413850
6390-121E27-603-69-1: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-551-0044
Spanner Wrench

145510044
F46832: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-444-8307
Spanner Wrench

144448307
0478-203138: RNCC: 3 | RNVC: 2

23 Jan 1991

5120-14-232-1672

5120-14-304-5600

5120-14-566-8007
Mechanical Puller

145668007
47045531: RNCC: 3 | RNVC: 2

20 Dec 2010

5120-14-247-9798
Adaptateur De Maint

142479798
160-71960-02: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-352-3151
Cle Detau

143523151
MHC334-49: RNCC: 3 | RNVC: 2
MHC334-49: RNCC: 5 | RNVC: 2
MFG362-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-484-0066
Socket Head Screw Key Set

144840066
82H.JE10: RNCC: 3 | RNVC: 2
3148515326615: RNCC: 5 | RNVC: 2
82H-JE10: RNCC: 5 | RNVC: 2
0532661: RNCC: 5 | RNVC: 9

17 Oct 1996

5120-14-392-7218
Spanner Wrench

143927218
043801-621000: RNCC: 3 | RNVC: 2
0438-01-621000: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-343-9855
Cle Pour Ecrou Dent

143439855
9970-115-560: RNCC: 3 | RNVC: 2
85-689-5593: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-231-7339
Electrical Contact Remover

142317339
8500-31: RNCC: 3 | RNVC: 2
850031: RNCC: 5 | RNVC: 2
91364949: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-428-6080
Dextraction Poignee

144286080
20363680: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-574-1957
Box Wrench

145741957
1-13-326: RNCC: 3 | RNVC: 2
E113326: RNCC: 5 | RNVC: 9

14 Dec 2012

5120-14-430-3071
Open End Wrench

144303071
254877: RNCC: 3 | RNVC: 2
89414948: RNCC: 5 | RNVC: 2

15 Mar 1989

5120-14-453-7002
Seal Inserter And Remover

144537002
TRAO58802MONT34: RNCC: 3 | RNVC: 2

5 Mar 1992

5120-14-367-1305
Spanner Wrench

143671305
7M123G: RNCC: 3 | RNVC: 2

11 Dec 1980

5120-14-530-2312
Open End Wrench

145302312
96000018: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-304-2269

5120-14-343-1817
Pose Filet Ra Outil

143431817
01500600010: RNCC: 3 | RNVC: 2
01500600010: RNCC: 5 | RNVC: 2
01556000100: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-241-6067
Mandrin De Preserti

142416067
FF6X8MI: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-371-5671

Load More Results