What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 77 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 77 of 110

5120-14-466-0011
Spanner Wrench

144660011
0XB501-520-701-10R: RNCC: 3 | RNVC: 2

27 Oct 1993

5120-14-371-5702
Glissier Positionne

143715702
9970-121-195: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-232-6314

5120-14-217-2701

5120-14-274-7899
Sheet Metalworking Dolly Block

142747899
235-40: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-529-3840
Screwdriver Bit

145293840
AME.JE2: RNCC: 3 | RNVC: 2

28 Mar 2002

5120-14-281-1863
Mechanical Puller Attachment

142811863
4629: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-208-6036

5120-14-490-8778
Pince

144908778
4065 160 000 578: RNCC: 3 | RNVC: 2
F300 0T 000 5037: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-577-1148
Splicing Sleeve Compressing Tool

145771148
640171: RNCC: 3 | RNVC: 2
3148516401717: RNCC: 5 | RNVC: 2

8 Aug 2013

5120-14-369-4668
Hand Screw Jack Extension

143694668
CR0Q01MANSPHEX543-591: RNCC: 3 | RNVC: 2
CR0Q01MANSPHEX543-591: RNCC: 5 | RNVC: 2

17 Apr 1981

5120-14-348-4421
Spanner Wrench

143484421
GSM084-008F6: RNCC: 3 | RNVC: 2
GSM084-08F6: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-421-6354
Socket Head Screw Key

144216354
0372-42-10100: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-370-8138
Spanner Wrench

143708138
6254-57027: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-226-3144
Extracteur Roulemen

142263144
60290-02-20B0M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-220-5149
Cle Speciale

142205149
3160S95-33-005: RNCC: 3 | RNVC: 2
3160-95-33-005: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-290-3612
Enclume Cordonnier

142903612
NO PRIMARY REF14-290-3612: RNCC: 3 | RNVC: 2
ENCLUMEC0RD0NNIERC0LDECYGNEM0NTE: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-574-8279
Mechanical Puller

145748279
NLM 03328-40: RNCC: 3 | RNVC: 2
03328-40: RNCC: 5 | RNVC: 2
91930551: RNCC: 5 | RNVC: 2

20 Feb 2013

5120-14-404-2701
Pompe Tarage Inject

144042701
DLT039051: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-388-4197
Plaque De Levage

143884197
02640816000: RNCC: 3 | RNVC: 2
026408160: RNCC: 5 | RNVC: 2

3 Nov 1983

5120-14-482-3756
Screwdriver Bit

144823756
001197D: RNCC: 3 | RNVC: 2

11 Jul 1996

5120-14-568-4913
Mechanical Puller

145684913
F27080000: RNCC: 3 | RNVC: 2

7 Jun 2011

5120-14-383-4659
Electrical Card Extractor

143834659
20198001: RNCC: 3 | RNVC: 2
20198001: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-314-2327
Spanner Wrench

143142327
160-888192: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-040-6721
Craftsman's Tweezers

140406721
356: RNCC: 3 | RNVC: 2
309: RNCC: 5 | RNVC: 2
309: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-223-3006

5120-14-520-5965
Socket Wrench Socket

145205965
R7/16E: RNCC: 3 | RNVC: 2
51072: RNCC: 3 | RNVC: 2
3148510510729: RNCC: 5 | RNVC: 2
R.7/16E: RNCC: 5 | RNVC: 2

24 May 2000

5120-14-377-1344
Cle Dextraction

143771344
10-112-014: RNCC: 3 | RNVC: 2
10112014: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-443-9426

5120-14-420-8397

5120-14-231-3969
Socket Wrench Socket

142313969
J.13/16: RNCC: 3 | RNVC: 2
J-13/16: RNCC: 3 | RNVC: 2
J13-16: RNCC: 3 | RNVC: 2
3148510278407: RNCC: 5 | RNVC: 2
J13-16: RNCC: 5 | RNVC: 2
3272670291591: RNCC: 5 | RNVC: 2
0027840: RNCC: 5 | RNVC: 9
74J13-16: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-557-1431
Hot Line Stick

145571431
FA7B1-080-05-VLRA120001: RNCC: 3 | RNVC: 2

21 May 2008

5120-14-214-3281
Socket Wrench Socket

142143281
J.8: RNCC: 3 | RNVC: 2
9970-115-265: RNCC: 5 | RNVC: 2
3148510271200: RNCC: 5 | RNVC: 2
J8: RNCC: 5 | RNVC: 2
0110968L00: RNCC: 5 | RNVC: 2
91493213: RNCC: 5 | RNVC: 2
CAE00927: RNCC: 5 | RNVC: 2
0027120: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-209-3983
A Cailloux Croc

142093983
NO PRIMARY REF14-209-3983: RNCC: 3 | RNVC: 2
CHA2-330A: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-276-3172
Socket Wrench Socket

142763172
C1 13-16: RNCC: 3 | RNVC: 2
K.1'13/16A: RNCC: 3 | RNVC: 2
K1 13-16: RNCC: 3 | RNVC: 9
3148510298849: RNCC: 5 | RNVC: 2
3272670293830: RNCC: 5 | RNVC: 2
0029884: RNCC: 5 | RNVC: 9
K1 13-16: RNCC: 5 | RNVC: 9
DEMK1 13-16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-378-8437
Open End Wrench

143788437
UHB232-47: RNCC: 3 | RNVC: 2
UHB232-47: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-245-2064
Embout Pour Outil D

142452064
0187-001-000: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-280-1395

5120-14-232-9200

5120-14-288-7001
Manivelle Dynamomet

142887001
D1553-8043: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-326-0186
Outillag Pr Emboita

143260186
151934: RNCC: 3 | RNVC: 2
151934: RNCC: 5 | RNVC: 9
85-800-1448: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-222-7166
Open End Wrench

142227166
13L19-32X11-16: RNCC: 3 | RNVC: 2
11 19-32X11-16: RNCC: 3 | RNVC: 2
39CP19X32X11-16: RNCC: 3 | RNVC: 2
10A19-32X11-16: RNCC: 5 | RNVC: 9
VIR39CP19X32X11-16: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-290-7513

5120-14-288-6046
Socket Head Screw Key

142886046
T0120BBC5APL6: RNCC: 3 | RNVC: 2
403657T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-425-9664
Bearing And Bushing Inserter

144259664
6231: RNCC: 3 | RNVC: 2
541663: RNCC: 5 | RNVC: 2

28 Jul 1988

5120-14-443-7919
Spanner Wrench

144437919
F46275: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-490-6932
File

144906932
241 F 01378 000: RNCC: 3 | RNVC: 2
F300 0T 000 1062: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6884
Drill

144906884
240 D 01884 011: RNCC: 3 | RNVC: 2
F300 0T 000 0993: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-300-0534

5120-14-319-2764

5120-14-271-5608
Spanner Wrench

142715608
8006000248: RNCC: 3 | RNVC: 2
6000248: RNCC: 5 | RNVC: 2
0T2-2-14: RNCC: 5 | RNVC: 9
0T2-2-14: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-483-1210
Socket Wrench Socket

144831210
0027900: RNCC: 3 | RNVC: 2
J.5/16F: RNCC: 5 | RNVC: 2

9 Aug 1996

5120-14-324-8870
Face Spanner Wrench Socket

143248870
0-702491-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-450-2578
Verrou Extracteur

144502578
S3SD18134-4: RNCC: 3 | RNVC: 2
S3SD18134-4: RNCC: 5 | RNVC: 2

25 Sep 1991

5120-14-480-1644
Socket Head Screw Socket Wrench Attachment Wrench Set

144801644
R.411MU: RNCC: 3 | RNVC: 2
0512440: RNCC: 5 | RNVC: 2
3148515124402: RNCC: 5 | RNVC: 2

22 Feb 1996

5120-14-274-8497
Stud Inserter And Remover

142748497
4202-1: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-530-3013
Open End Wrench

145303013
18.1': RNCC: 3 | RNVC: 2

29 May 2002

5120-14-484-6532
Socket Head Screw Key

144846532
83SH.9: RNCC: 3 | RNVC: 2
235-2814: RNCC: 5 | RNVC: 2
83SH.9: RNCC: 5 | RNVC: 2
3148511238301: RNCC: 5 | RNVC: 2
0123830: RNCC: 5 | RNVC: 9
FACOM83SH.9: RNCC: 5 | RNVC: 9

28 Nov 1996

5120-14-423-2321
Basculeur Cle Dyn

144232321
SP2085D-3-480: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-214-9313
Cone Blocage Et Deb

142149313
60290-01-22-020M1: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-463-5448
Stakeholder Bench Plate

144635448
0355103: RNCC: 3 | RNVC: 2
PL.153: RNCC: 5 | RNVC: 2
PL153: RNCC: 5 | RNVC: 2

17 Jun 1993

5120-14-402-9716
Fixed Open End Wrench Set

144029716
44JU8TCP: RNCC: 3 | RNVC: 2

25 Jul 1985

5120-14-437-9817
Spanner Wrench

144379817
05995002: RNCC: 3 | RNVC: 2

5 Mar 1990

5120-14-552-7302
Socket Head Screw Key

145527302
84TC.10: RNCC: 3 | RNVC: 2
84TC.10: RNCC: 5 | RNVC: 2
3148511255902: RNCC: 5 | RNVC: 2

26 Jan 2007

5120-14-463-7667
Spanner Wrench

144637667
428390A: RNCC: 3 | RNVC: 2
M35733: RNCC: 5 | RNVC: 2

29 Jun 1993

5120-14-298-1690
Flat Tip Screwdriver

142981690
77931: RNCC: 3 | RNVC: 2
77931: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-505-9736
Spanner Wrench

145059736
0519863E01: RNCC: 3 | RNVC: 2

1 Apr 1998

5120-14-575-0726
Mechanical Puller

145750726
TM2409G001: RNCC: 3 | RNVC: 2

12 Mar 2013

5120-14-558-4512
Flat Tip And Cross Tip Screwdriver Set

145584512
DELT52473: RNCC: 3 | RNVC: 2

3 Oct 2008

5120-14-370-4526

5120-14-200-6586
Adjustable Wrench

142006586
61-10: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-314-5194
Flat Tip Screwdriver

143145194
0372-42-10059: RNCC: 3 | RNVC: 2
L-0372-42-10059: RNCC: 5 | RNVC: 2
O372-42-10059: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-573-5482
Seal Inserter

145735482
888-489-300-2: RNCC: 3 | RNVC: 2

19 Oct 2012

5120-14-311-4518
Seal Inserter And Remover

143114518
3130S95-60-024-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-319-4075
Fixed Open End Wrench Set

143194075
13J15: RNCC: 3 | RNVC: 2
13-J-15: RNCC: 3 | RNVC: 2
3272670338081: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-466-5918
Bearing And Bushing Inserter And Remover

144665918
851-500-010-0: RNCC: 3 | RNVC: 2

17 Nov 1993

5120-14-303-5876

5120-14-316-5643
Spanner Wrench

143165643
3210-97-31-450: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-292-5892

5120-14-380-1620
A Fourch Tournevis

143801620
004327005P: RNCC: 3 | RNVC: 2

8 Nov 1982

5120-14-574-1947
Box Wrench

145741947
1-13-325: RNCC: 3 | RNVC: 2
E113325: RNCC: 5 | RNVC: 9

14 Dec 2012

5120-14-379-3644
A Fourch Tournevis

143793644
004336005P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-424-3487
Socket Wrench Socket

144243487
K.46A: RNCC: 3 | RNVC: 2
3148510294452: RNCC: 5 | RNVC: 2
K46A: RNCC: 5 | RNVC: 2
91629362: RNCC: 5 | RNVC: 2
190228: RNCC: 5 | RNVC: 2
0029445: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-481-0161
Socket Wrench Socket

144810161
S.30LA: RNCC: 3 | RNVC: 2
10428101: RNCC: 5 | RNVC: 2
S30LA: RNCC: 5 | RNVC: 2
0134320M00: RNCC: 5 | RNVC: 2
3148510554853: RNCC: 5 | RNVC: 2
0055485: RNCC: 5 | RNVC: 9

17 Apr 1996

5120-14-333-3171

5120-14-223-5311

5120-14-217-2719

5120-14-514-0110
Open End Wrench

145140110
ENFD29159-16X17: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-285-1186

5120-14-296-4625

5120-14-207-7574

5120-14-274-8645
Secteurs Extenseur

142748645
R31674-7-18REP3: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-281-2747
Extracteruur Daxe C

142812747
121E95-102-50-0: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-465-4731
Bearing And Bushing Remover

144654731
851-500-184-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-412-9849
Broche De Montage

144129849
853-201-866-0: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-333-3214
Cle A Choc Desaxeur

143333214
NO PRIMARY REF14-333-3214: RNCC: 3 | RNVC: 2
0037740: RNCC: 5 | RNVC: 2
NK.234: RNCC: 5 | RNVC: 2
NK234: RNCC: 5 | RNVC: 2
91596666: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-308-2158

5120-14-572-4766
Bearing And Bushing Remover

145724766
223605379: RNCC: 3 | RNVC: 2

6 Jul 2012

5120-14-389-2188
Serrage Cle

143892188
M34018: RNCC: 3 | RNVC: 2
85-692-3945: RNCC: 6 | RNVC: 9

29 Nov 1983

5120-14-452-2554
Socket Wrench Socket

144522554
R3-8: RNCC: 3 | RNVC: 2
R-3/8: RNCC: 3 | RNVC: 2
3272670213005: RNCC: 5 | RNVC: 2

8 Jan 1992

5120-14-537-1273
Socket Wrench Socket

145371273
J.1'LA: RNCC: 3 | RNVC: 2
3148510284415: RNCC: 5 | RNVC: 2

1 Oct 2003

5120-14-315-1989

5120-14-208-7286

5120-14-259-3496
Bras

142593496
GSM193-06REP1A: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-442-5750
Outil.Contr.Bouteil

144425750
78S47: RNCC: 3 | RNVC: 2
78S47: RNCC: 5 | RNVC: 9

22 Oct 1990

5120-14-425-6006
Casse-Ecrou

144256006
289.36: RNCC: 3 | RNVC: 2
3148511662854: RNCC: 5 | RNVC: 2
0166285: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-416-7606
Reglage Cale

144167606
537464: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-342-5320

5120-14-215-3050
Spanner Wrench

142153050
2228-70-17: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-233-9465
Outil De Reglage

142339465
81-7-1LMR530K13-3-12: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-321-9559
Cle A Panier

143219559
GSM196-010F35: RNCC: 3 | RNVC: 2
GSM196-10F35: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-517-9357
Six Point Tip Screwdriver

145179357
ENFD6577-6X40: RNCC: 3 | RNVC: 2

19 Jan 2000

5120-14-424-9026
Spanner Wrench

144249026
9970-711-002: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-474-9850
Torque Wrench Adapter

144749850
RT33513: RNCC: 3 | RNVC: 2
RT033513: RNCC: 5 | RNVC: 2
85-694-4032: RNCC: 6 | RNVC: 9

16 Mar 1995

5120-14-228-0782
Bloc De Pre-Sertiss

142280782
RPS4F3-5X6K: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-435-6941
De Montage Outil

144356941
37AM039: RNCC: 3 | RNVC: 2
85-694-1961: RNCC: 6 | RNVC: 9

20 Nov 1989

5120-14-332-0452
Jeu Cde Leviers

143320452
9070-126: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-406-6572
Boitier Support

144066572
853-200-849-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-234-0505
Cle Tricoise Citern

142340505
NO PRIMARY REF14-234-0505: RNCC: 3 | RNVC: 2
B7435-9: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-251-4422
Forceps De Demontag

142514422
E28771: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-416-7504
Rondelle Dappui

144167504
537267: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-569-0338
Mechanical Puller

145690338
F27379000: RNCC: 3 | RNVC: 2
F27379000: RNCC: 5 | RNVC: 2

1 Aug 2011

5120-14-416-7608
Mandrin Presse

144167608
537471: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-262-7498

5120-14-407-0483
Spanner Wrench

144070483
F46494: RNCC: 3 | RNVC: 2
85-692-9555: RNCC: 6 | RNVC: 9

29 Jan 1986

5120-14-345-9486

5120-14-559-6968
Flat Tip Screwdriver

145596968
8813232000: RNCC: 3 | RNVC: 2

6 Feb 2009

5120-14-510-7446
Screwdriver Bit

145107446
EP.132T: RNCC: 3 | RNVC: 2
0614 122 52: RNCC: 5 | RNVC: 2
3148510241494: RNCC: 5 | RNVC: 2

10 Nov 1998

5120-14-545-5032
Pedal Adjustment Tool Compressor

145455032
PE-65000: RNCC: 3 | RNVC: 2

15 Apr 2005

5120-14-503-4641
Electronic Component Inserter And Remover

145034641
29339601: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-302-2973
Spanner Wrench

143022973
14319: RNCC: 3 | RNVC: 2
134027: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-287-1639
Spanner Wrench

142871639
815B3920781: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-216-2041
Offset Screwdriver

142162041
RT2960: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-457-9899
Seal Inserter And Remover

144579899
540602: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-418-1531
Socket Wrench Socket

144181531
3203110: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-369-7609
Face Spanner Wrench Socket

143697609
F46402: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-425-9623
Bearing And Bushing Inserter

144259623
6164: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-519-5819
Quick Adjusting Screw Clamp

145195819
03457-08: RNCC: 3 | RNVC: 2

22 Mar 2000

5120-14-433-1303
Socket Wrench Extension

144331303
M4Z7101943420: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-444-5262
Screw Thread Insert Inserter

144445262
01500718000: RNCC: 3 | RNVC: 2

14 Jan 1991

5120-14-574-6377
Pliers

145746377
CH-06300: RNCC: 3 | RNVC: 2

8 Feb 2013

5120-14-329-6361
Support Detau

143296361
MFG103-21: RNCC: 3 | RNVC: 2
MFG103-21: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-489-7909
Socket Wrench Socket

144897909
J.3/4H: RNCC: 3 | RNVC: 2
00.46.19.60: RNCC: 5 | RNVC: 2
3148510279664: RNCC: 5 | RNVC: 2
0027966: RNCC: 5 | RNVC: 9

19 Aug 1997

5120-14-324-8878
Elem Guide Roulemen

143248878
0-41102-3: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-488-6848
Bague Cle

144886848
287074138: RNCC: 3 | RNVC: 2
F300 0T 018 9338: RNCC: 6 | RNVC: 9

28 May 1997

5120-14-240-3526
Outil De Deverouill

142403526
77378: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-369-8706

5120-14-372-9536
Cross Tip Screwdriver

143729536
AFP.0: RNCC: 3 | RNVC: 2
3148510053004: RNCC: 5 | RNVC: 2
AFP0: RNCC: 5 | RNVC: 2
162-5919: RNCC: 5 | RNVC: 2
0005300: RNCC: 5 | RNVC: 9
FACOMAFP.0: RNCC: 5 | RNVC: 9
85-691-6791: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-373-0176
Screwdriver Bit

143730176
PLD2-49-2: RNCC: 3 | RNVC: 2
85-691-7400: RNCC: 6 | RNVC: 9

21 Sep 1981

5120-14-282-8236
Socket Wrench Handle Bar

142828236
VTR250-11401: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-232-1670
Open End Wrench

142321670
NO PRIMARY REF14-232-1670: RNCC: 3 | RNVC: 2
LFP54-580: RNCC: 5 | RNVC: 2
LFP54-580: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-313-9205
Jeu De Pose Oeillet

143139205
NO PRIMARY REF14-313-9205: RNCC: 3 | RNVC: 2
86-130JEUDEP0SE: RNCC: 5 | RNVC: 9
RECHBF86: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-405-1551
Fx Arbre De Control

144051551
778BE/LOG: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-321-8454
Torque Wrench Adapter

143218454
8810310003: RNCC: 3 | RNVC: 2
85-590-6220: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-428-4928
De Montage Obus

144284928
46MS047-46-0003: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-406-6394
Joint Guide

144066394
OUT50360: RNCC: 3 | RNVC: 2
0UT50360: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-526-9757
Spanner Wrench

145269757
ST159-2M681-5R704: RNCC: 3 | RNVC: 2

19 Sep 2001

5120-14-321-6331
Spanner Wrench

143216331
0-700788: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-426-5152
Craftsman's Tweezers

144265152
142.1: RNCC: 3 | RNVC: 2
142-1: RNCC: 5 | RNVC: 2
3148511375808: RNCC: 5 | RNVC: 2
91627096: RNCC: 5 | RNVC: 2
0137580: RNCC: 5 | RNVC: 9

7 Sep 1988

5120-14-272-3591
Spanner Wrench

142723591
E74323A26AGW: RNCC: 2 | RNVC: 2
8518075: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-436-0257
Preformed Packing Inserter

144360257
RT30072: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-577-1653
Screwdriver Bit

145771653
ED.202: RNCC: 3 | RNVC: 2
22662: RNCC: 5 | RNVC: 2
3148510226620: RNCC: 5 | RNVC: 2

20 Aug 2013

5120-14-227-5842
Jet Creux Pour Demo

142275842
NO PRIMARY REF14-227-5842: RNCC: 3 | RNVC: 2
1256: RNCC: 5 | RNVC: 9
A1256: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-484-4334
Mechanical Puller Adapter

144844334
888-425-500-1: RNCC: 3 | RNVC: 2

14 Nov 1996

5120-14-327-4924
Spanner Wrench

143274924
E74-323-120A135: RNCC: 2 | RNVC: 2

2 Jul 1975

5120-14-393-0271
Combination Box And Open End Wrench

143930271
41.10: RNCC: 3 | RNVC: 2
3148511013571: RNCC: 5 | RNVC: 2
41-10: RNCC: 5 | RNVC: 2
91564506: RNCC: 5 | RNVC: 2
0184643B00: RNCC: 5 | RNVC: 2
0101357: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-395-9132
Reparation Pochette

143959132
3040-990: RNCC: 3 | RNVC: 9
MUL3040-990: RNCC: 5 | RNVC: 9

23 Nov 1984

5120-14-234-6960
Doigt De Guidage En

142346960
8355324: RNCC: 3 | RNVC: 2
8355324: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-443-0171
Sertissag Outillage

144430171
MMG070B22: RNCC: 3 | RNVC: 2
MMG070B22: RNCC: 5 | RNVC: 2

7 Nov 1990

5120-14-449-7109

5120-14-246-6955

5120-14-529-1915
Jo Outil De Montage

5120-14-348-4573
Screwdriver Bit

143484573
586-12: RNCC: 3 | RNVC: 2
166-12: RNCC: 3 | RNVC: 2
155-3: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-273-7712
Flat Tip Screwdriver

142737712
121-2: RNCC: 3 | RNVC: 2
FR2: RNCC: 3 | RNVC: 2
SYQ0689: RNCC: 5 | RNVC: 2
SYQ0690: RNCC: 5 | RNVC: 2
1-10-44: RNCC: 5 | RNVC: 2
1-11-02: RNCC: 5 | RNVC: 2
FRPN4: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-213-7051
Cle Speciale

142137051
1951-2316: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-226-3746

5120-14-486-5608
Outillage D'ar

144865608
RT13638: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-313-8780
Cross Tip Screwdriver

143138780
M2-034: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-212-3806

5120-14-201-6842

5120-14-391-2599

5120-14-515-4483
Plug Electrical Connector Extractor

145154483
27318208-2: RNCC: 3 | RNVC: 2

13 Jul 1999

5120-14-209-5138

5120-14-485-8836
Open End Wrench

144858836
K7739-9/16BS1/2W-5/8BS9/16W: RNCC: 3 | RNVC: 2
9/16BS1/2W-5/8BS9/16W: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-513-7356
Flat Tip Screwdriver

145137356
ENFD6561-0-6X3-5X75: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-401-0691
Wrench Kit

144010691
089151354: RNCC: 3 | RNVC: 2

29 May 1985

5120-14-316-1606
Bearing And Bushing Inserter And Remover

143161606
A129949: RNCC: 3 | RNVC: 2
100305: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-556-0298
Socket Wrench Adapter

145560298
658187: RNCC: 3 | RNVC: 2
NM.230A: RNCC: 3 | RNVC: 2
3148516581877: RNCC: 5 | RNVC: 2

22 Jan 2008

5120-14-369-6984
Open End Wrench

143696984
BB92: RNCC: 3 | RNVC: 9

17 Apr 1981

5120-14-433-6116
Bearing And Bushing Remover

144336116
8815419000: RNCC: 3 | RNVC: 2
89415017: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-291-8159
Socket Wrench Socket

142918159
NS.27: RNCC: 3 | RNVC: 2
3148510421902: RNCC: 5 | RNVC: 2
NS27: RNCC: 5 | RNVC: 2
0714 13 12: RNCC: 5 | RNVC: 2
0042190: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-305-9450
Spanner Wrench

143059450
02640008000: RNCC: 3 | RNVC: 2
026400080: RNCC: 5 | RNVC: 2
418913: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-219-2693

5120-14-371-7710

5120-14-442-6828
Screwdriver Bit

144426828
000-0100B: RNCC: 3 | RNVC: 2

24 Oct 1990

5120-14-364-9925
Spanner Wrench

143649925
521703-80: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-401-2414
Open End Wrench

144012414
0805109D00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-517-9362
Six Point Tip Screwdriver

145179362
ENFD6577-25X40: RNCC: 3 | RNVC: 2

19 Jan 2000

5120-14-346-5037
Flat Tip Screwdriver

143465037
HE586-6050: RNCC: 3 | RNVC: 2
T0URNEVPLAMA6X150: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-440-5445
Face Spanner Wrench Socket

144405445
37AM020: RNCC: 3 | RNVC: 2
85-694-0445: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-413-6871
Spanner Wrench

144136871
13-250-16: RNCC: 3 | RNVC: 2

15 Jan 1987

5120-14-271-8770
Torque Wrench Adapter

142718770
M.200E: RNCC: 3 | RNVC: 2
3148510325101: RNCC: 5 | RNVC: 2
M200E: RNCC: 5 | RNVC: 2
0032510: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-397-2231
Maintien Outillage

143972231
H46322: RNCC: 3 | RNVC: 2

1 Dec 1984

5120-14-397-8246

5120-14-495-4206
Cliquet

144954206
NO PRIMARY REF14-495-4206: RNCC: 3 | RNVC: 2
L10470-82: RNCC: 5 | RNVC: 9
F300 0T 019 2365: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-332-6092
Poignee Extracteur

143326092
29780390: RNCC: 3 | RNVC: 9
14-00490005: RNCC: 5 | RNVC: 2
16667618: RNCC: 5 | RNVC: 9
00490005: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-270-5763

5120-14-488-3126
Socket Head Screw Key

144883126
83H.1,5: RNCC: 3 | RNVC: 2
0124001: RNCC: 5 | RNVC: 2
3148511240014: RNCC: 5 | RNVC: 2
83H1,5: RNCC: 5 | RNVC: 2
83H1-5: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-424-7549
Socket Head Screw Key

144247549
0009320: RNCC: 3 | RNVC: 2
APE.1: RNCC: 5 | RNVC: 2
APE1: RNCC: 5 | RNVC: 2

8 Jun 1988

5120-14-303-3008
Cross Tip Screwdriver

143033008
AX.1: RNCC: 3 | RNVC: 2
3148510125206: RNCC: 5 | RNVC: 2
AX1: RNCC: 5 | RNVC: 2
0134976A00: RNCC: 5 | RNVC: 2
91396443: RNCC: 5 | RNVC: 2
0012520: RNCC: 5 | RNVC: 9
912 063 300 170: RNCC: 6 | RNVC: 9

1 Jan 1973

5120-14-522-5850
Flat Tip Screwdriver

145225850
AG-6,5X125: RNCC: 3 | RNVC: 2

8 Nov 2000

5120-14-247-9812
Adaptateur Bati Nac

142479812
160-71960-33: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-369-0232
Hydraulic Jack Handle

143690232
HSM17: RNCC: 3 | RNVC: 9
RASHSM17: RNCC: 5 | RNVC: 9

17 Apr 1981

5120-14-506-9693
Socket Wrench Extension

145069693
DM.20: RNCC: 3 | RNVC: 2
3148510199757: RNCC: 5 | RNVC: 2
DM20: RNCC: 5 | RNVC: 2

27 May 1998

5120-14-416-7589
Maintien Outil

144167589
537439: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-556-7980
Handling Tool Arm

145567980
82190579000: RNCC: 3 | RNVC: 2

11 Apr 2008

5120-14-395-7162

5120-14-289-4427

5120-14-219-3659

5120-14-352-3153
Drift

143523153
MGA170-02: RNCC: 3 | RNVC: 2
MGA170-02: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-555-4314
Open End Wrench

145554314
DFCO-18: RNCC: 3 | RNVC: 2

9 Nov 2007

5120-14-382-5509
Electrical Card Extractor

143825509
NO PRIMARY REF14-382-5509: RNCC: 3 | RNVC: 2
20030890: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-485-7334
Mechanical Puller Attachment

144857334
332A93-3181-21: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-382-5914
Electrical Card Extractor

143825914
NO PRIMARY REF14-382-5914: RNCC: 3 | RNVC: 2
20030884: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-448-4569

5120-14-538-2456
Spanner Wrench

145382456
NGM0010033760032: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-246-7006
Open End Wrench

142467006
10-38X42EC0: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-527-0332
Hydraulic Fitting Crimping Tool Head

145270332
DLT30PSHAS014: RNCC: 3 | RNVC: 2

26 Sep 2001

5120-14-236-2444

5120-14-570-1865
Hand Armament Subsystem Carrier

145701865
UFA31659: RNCC: 3 | RNVC: 2

25 Nov 2011

5120-14-324-4290
Rondel Pouss Extrac

143244290
D1553-4814: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-448-5541
Outil Mont-Demont

144485541
Z204807: RNCC: 3 | RNVC: 2

1 Jul 1991

5120-14-330-2385
Sando Echang Levier

143302385
MS1188: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-459-6432
Cle Speciale

144596432
312-08033-001-W26H: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-271-6118

5120-14-447-6049

5120-14-273-3180

5120-14-249-0666
Rallonge-Trepied Je

142490666
TEL: RNCC: 3 | RNVC: 2
ZINTEL: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-406-6417
Reglage Poussoir

144066417
OUT9361: RNCC: 3 | RNVC: 2
0UT9361: RNCC: 5 | RNVC: 2

8 Jan 1986

5120-14-238-2982

5120-14-552-5242
Screwdriver Bit

145525242
ES.614: RNCC: 3 | RNVC: 2
ES.614: RNCC: 5 | RNVC: 2
3148510248370: RNCC: 5 | RNVC: 2

11 Jan 2007

5120-14-419-2567
Socket Wrench Socket

144192567
530514: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-454-7805
Open End Wrench

144547805
0F658: RNCC: 3 | RNVC: 2

15 Apr 1992

5120-14-281-1779
Socket Wrench Adapter

142811779
154896: RNCC: 3 | RNVC: 2
105555: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-542-6854
Open End Wrench

145426854
8049732C00: RNCC: 3 | RNVC: 2

28 Jul 2004

5120-14-317-0483
Spanner Wrench

143170483
RT5862: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-371-0454
Carpenters' Pincers

143710454
P107: RNCC: 3 | RNVC: 9

5 Jun 1981

5120-14-393-8789
Monte-Joint Outil

143938789
NO PRIMARY REF14-393-8789: RNCC: 3 | RNVC: 2
OU139390: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-384-7349
Electrical Card Extractor

143847349
NO PRIMARY REF14-384-7349: RNCC: 3 | RNVC: 2
16931997: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-316-5613
Face Spanner Wrench Socket

143165613
3210-95-33-105-1: RNCC: 3 | RNVC: 2
08-511: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-488-9895
Hand Terminal Crimping Tool

144889895
231652-3: RNCC: 3 | RNVC: 2

18 Jun 1997

5120-14-404-8318
Open End Wrench

144048318
10-3-2X5-5CP: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-265-9591
Electrical Contact Remover

142659591
91012-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-527-9353
Flat Tip Screwdriver

145279353
AY.5,5X200VE: RNCC: 3 | RNVC: 2
3148510130514: RNCC: 5 | RNVC: 2
AY.5.5X200VE: RNCC: 5 | RNVC: 9
AY.5.5X200VSE: RNCC: 5 | RNVC: 9

30 Nov 2001

5120-14-240-3875
Cle A Ergots Specia

142403875
141-11: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-369-1874
Axe Centreur

143691874
365A93-4145-22: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-386-6011
Montage Support

143866011
9970-125-074: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-407-6105
Bearing And Bushing Remover

144076105
NO PRIMARY REF14-407-6105: RNCC: 3 | RNVC: 2
600030: RNCC: 5 | RNVC: 9

27 Feb 1986

5120-14-233-4389

5120-14-253-9781
Entretoise Extracte

142539781
C46202: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-535-7193
Outil D'ouverture

145357193
IT266-OCPW3: RNCC: 3 | RNVC: 2

20 Jun 2003

5120-14-386-4285
Outil Montage Et Ca

143864285
MONT27416: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-514-8391
Cross Tip Screwdriver

145148391
ENFD6568-2X250: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-219-4167

5120-14-405-3359
Perche Iso Rallonge

144053359
006107210P: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-225-3985

5120-14-244-6801

5120-14-416-7556
Reglage Barre

144167556
537399: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-348-2768
Electrical Card Extractor

143482768
2084-035: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-363-2239
Spanner Wrench

143632239
NO PRIMARY REF14-363-2239: RNCC: 3 | RNVC: 2
231341: RNCC: 5 | RNVC: 9
85-691-1504: RNCC: 6 | RNVC: 9

3 Apr 1980

5120-14-383-0888
Cont Ent Adaptateur

143830888
9970-121-174: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-557-8427
Socket Head Screw Key

145578427
F3435-17044: RNCC: 3 | RNVC: 2
17044: RNCC: 5 | RNVC: 2

22 Jul 2008

5120-14-427-2068
Extracteur Etrier

144272068
46AM049-02-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-382-2695
Contact Positioner

5120-14-288-3166

5120-14-382-7074
Insertion Axe Outil

143827074
6391-121E27-503-50-1: RNCC: 3 | RNVC: 2
6391-121E27-503-50-1: RNCC: 5 | RNVC: 2

17 Feb 1983

5120-14-299-6424
Douille Sertissage

142996424
FF8X08C: RNCC: 3 | RNVC: 2
0T1604: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-370-3285
Cle Fixat Injecteur

143703285
5000261117: RNCC: 3 | RNVC: 2
5000261117: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-325-7274

5120-14-420-2278
Ensemble Oeilleton

144202278
330A94-8700-11: RNCC: 3 | RNVC: 2

25 Nov 1987

5120-14-404-0872
Combination Box And Open End Box Wrench

144040872
853-100-154-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-528-4712
Torque Wrench Adapter

145284712
888-471-600-1: RNCC: 3 | RNVC: 2
888-471-600-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-251-4455
Extracteur Special

142514455
123038-158: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-416-7553
Speciale Cle

144167553
537396: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-314-4053
Spanner Wrench

143144053
3511-961-26401: RNCC: 3 | RNVC: 2
3511 961 26401: RNCC: 5 | RNVC: 2
MQ12640: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-387-1939
Mise En Place Outil

143871939
MHN235-43: RNCC: 3 | RNVC: 2
MHN235-43: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-227-9421
Flat Tip Screwdriver

142279421
12506676: RNCC: 3 | RNVC: 2
12506676: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-363-9606
Slip Joint Pliers

143639606
0140600: RNCC: 3 | RNVC: 2
176: RNCC: 5 | RNVC: 2
176.CP: RNCC: 5 | RNVC: 2
176CP: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-281-8189
Sheet Metalworking Dolly Block

142818189
8810003012: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-548-5208
Hand Fiber Optic Contact Crimping Tool

145485208
R282211000: RNCC: 3 | RNVC: 2

24 Jan 2006

5120-14-233-6944

5120-14-455-0059
Sheet Metalworking Stake

144550059
853-600-315-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-513-9475
Flat Tip Screwdriver

145139475
ENFD6560-1-6X10X200: RNCC: 3 | RNVC: 2

19 Apr 1999

5120-14-476-9329
Socket Head Screw Key

144769329
NO PRIMARY REF14-476-9329: RNCC: 3 | RNVC: 2
18509474-9: RNCC: 5 | RNVC: 2
0125646: RNCC: 5 | RNVC: 2
84HT.5: RNCC: 5 | RNVC: 2

12 Jul 1995

5120-14-272-3666
Open End Wrench

142723666
E74302C36-37WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-390-7955
Cle Speciale

143907955
065U20-623254W: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-457-3280
Spanner Wrench

144573280
19359111: RNCC: 3 | RNVC: 2
2438-1239: RNCC: 3 | RNVC: 2

27 Aug 1992

5120-14-558-2058
Rope Coiling Device

145582058
218717-0: RNCC: 3 | RNVC: 2

11 Sep 2008

5120-14-316-5578
Outil Demmanchement

143165578
321A97-3216-00: RNCC: 3 | RNVC: 2
321-97-3216-00: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-204-3016
Cle Speciale

142043016
M6-032: RNCC: 3 | RNVC: 2
M6-032: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-247-8013
Ce De Reglage Plate

142478013
3130-95-90-001-1: RNCC: 3 | RNVC: 2
3130S95-90-001-1: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-232-2231
Blacksmith's Punch

142322231
0012120301: RNCC: 3 | RNVC: 2
M0B12-12ECR0ND: RNCC: 3 | RNVC: 2
3833-12EMMANCHE: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-326-2704
Wrench Extension Handle

143262704
330A93-3011-10: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-217-9994
Cambreur Plat

142179994
NO PRIMARY REF14-217-9994: RNCC: 3 | RNVC: 2
22860F: RNCC: 5 | RNVC: 9
22860F: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-201-2702
Machinoir En Os

142012702
NO PRIMARY REF14-201-2702: RNCC: 3 | RNVC: 2
MACHIN0IREN0S: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-463-1687
Mechanical Puller Attachment

144631687
16380258: RNCC: 3 | RNVC: 2
16380258: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-201-9573
Open End Wrench

142019573
44 13X15: RNCC: 3 | RNVC: 2
SYQ0073: RNCC: 5 | RNVC: 2
44S13X15: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-532-6585
Socket Wrench Socket

145326585
W084817553: RNCC: 3 | RNVC: 2

27 Nov 2002

5120-14-400-6251
Monte Siege Soupape

144006251
DLP752890: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-575-9405
Inserter And Remove

145759405
8813734002: RNCC: 3 | RNVC: 2

16 May 2013

5120-14-372-8829

5120-14-532-3441
Mechanical Puller Adapter

145323441
899754-0001: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-481-4809
Spanner Wrench

144814809
NO PRIMARY REF14-481-4809: RNCC: 3 | RNVC: 2
RT32914: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-302-6524
Electrical Contact Remover

143026524
06-1877-04: RNCC: 3 | RNVC: 2
06-1877-04: RNCC: 3 | RNVC: 9
06-1877-04: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-338-4727

5120-14-443-9427

5120-14-466-8678
Outillage Special

144668678
325532: RNCC: 3 | RNVC: 2
325532: RNCC: 5 | RNVC: 9

7 Dec 1993

5120-14-295-6454
Outil Montag Axe Ar

142956454
8810003083: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-321-7867

5120-14-309-6614
Maniv Regla Boitier

143096614
29369: RNCC: 3 | RNVC: 2
29369: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-230-6534
Spanner Wrench

142306534
42636: RNCC: 3 | RNVC: 2
42636A: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-397-5565
Face Spanner Wrench Socket

143975565
101131: RNCC: 3 | RNVC: 2
C66365: RNCC: 5 | RNVC: 2

14 Dec 1984

5120-14-572-9124
Socket Wrench Socket

145729124
NG.46A: RNCC: 3 | RNVC: 2

27 Aug 2012

5120-14-577-1801
Spanner Wrench

145771801
70 12 39 20 22: RNCC: 3 | RNVC: 2
50-100: RNCC: 5 | RNVC: 1

20 Aug 2013

5120-14-457-9997
Montage Reglage

144579997
NO PRIMARY REF14-457-9997: RNCC: 3 | RNVC: 2
304A26833/34: RNCC: 5 | RNVC: 9
304A26833/34: RNCC: 5 | RNVC: 9

2 Oct 1992

5120-14-485-8835
Open End Wrench

144858835
K7739-0BA-2BA: RNCC: 3 | RNVC: 2
0BA-2BA: RNCC: 5 | RNVC: 2

19 Feb 1997

5120-14-406-6526
Controle Pige

144066526
853-200-406-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-454-2943
Sertissag Outillage

144542943
MMG070-37: RNCC: 3 | RNVC: 2
MMG070-37: RNCC: 5 | RNVC: 2

26 Mar 1992

5120-14-463-1418
Bearing And Bushing Inserter And Remover

144631418
50346: RNCC: 3 | RNVC: 2
85-694-9653: RNCC: 6 | RNVC: 9

26 May 1993

5120-14-235-7566
Socket Wrench Handle Bar

142357566
NO PRIMARY REF14-235-7566: RNCC: 3 | RNVC: 2
2552164: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-348-7719
Open End Wrench

143487719
NO PRIMARY REF14-348-7719: RNCC: 3 | RNVC: 2
70-18X19: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-14-368-5813
Poignee Montage Pis

143685813
14-18-981-0G: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-208-2076
Hand Material Handling Hook

142082076
NO PRIMARY REF14-208-2076: RNCC: 3 | RNVC: 2
202-22: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-220-8559

5120-14-497-7694
Torque Wrench Adapter

144977694
12.18: RNCC: 3 | RNVC: 2
3148510929057: RNCC: 5 | RNVC: 2
0092905: RNCC: 5 | RNVC: 9

15 Oct 1997

5120-14-386-1674
Open End Wrench

143861674
105118: RNCC: 3 | RNVC: 2
105118: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-208-6034

5120-14-268-9063

5120-14-421-6305
Open End Wrench

144216305
210104: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-266-6988

5120-14-259-6296
Outil A Crocheter

142596296
NO PRIMARY REF14-259-6296: RNCC: 3 | RNVC: 2
2726-4: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-321-1590
Screw Thread Insert Inserter

143211590
01500212400: RNCC: 3 | RNVC: 2
32071270: RNCC: 5 | RNVC: 2
32241270: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-524-6477
Open End Wrench

145246477
10542703: RNCC: 3 | RNVC: 2

2 Apr 2001

5120-14-244-4096
Open End Wrench

142444096
10-13X15: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-242-0574
Spanner Wrench

142420574
DLP751050: RNCC: 3 | RNVC: 2
DLT001958: RNCC: 5 | RNVC: 2
DLT01958: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-547-0339
Face Spanner Wrench Socket

145470339
901133: RNCC: 3 | RNVC: 2
91831061: RNCC: 5 | RNVC: 2

15 Sep 2005

5120-14-464-9480
Spanner Wrench

144649480
9970-711-007: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-427-2519
Spanner Wrench

144272519
488402M83-06P2: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-300-9664
Bearing Staking Installation Tool

143009664
341A93-3516-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-497-7998
Outillage Pour Vire

144977998
T60UT002000: RNCC: 3 | RNVC: 2

20 Oct 1997

5120-14-298-8404
Open End Wrench

142988404
EFF1-060-102: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-248-5504

5120-14-514-2810
Screw Thread Insert Inserter

145142810
01500272500: RNCC: 3 | RNVC: 2

5 May 1999

5120-14-380-8402
Extracteur

143808402
PR47610: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-226-3723

5120-14-333-3834

5120-14-454-9386
Flat Tip Screwdriver

144549386
AG.5,5X100: RNCC: 3 | RNVC: 2
3148510057002: RNCC: 5 | RNVC: 2
AG5-5X100: RNCC: 5 | RNVC: 2
AG.5,5X100: RNCC: 5 | RNVC: 2
005700: RNCC: 5 | RNVC: 9
0005700: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-331-5079
Lentille Extracteur

143315079
602158: RNCC: 3 | RNVC: 2
602158: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-351-7464
Broche Verrouillage

143517464
319019119: RNCC: 3 | RNVC: 2

12 Sep 1978

5120-14-316-6614

5120-14-454-9502
Cross Tip Screwdriver

144549502
AEFP.00X75: RNCC: 3 | RNVC: 2
3148510049229: RNCC: 5 | RNVC: 2
104-3957: RNCC: 5 | RNVC: 2
004922: RNCC: 5 | RNVC: 9
FACOMAEFP.00X75: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-467-1320
Graissage Outillage

144671320
MMG060-39: RNCC: 3 | RNVC: 2

16 Dec 1993

5120-14-212-9561
Tige De Guidage

142129561
NO PRIMARY REF14-212-9561: RNCC: 3 | RNVC: 2
147845: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-241-4484
Tournevis A Ressort

142414484
10-047: RNCC: 3 | RNVC: 2
0UTF16: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-451-5501
Pliers

144515501
C2719: RNCC: 3 | RNVC: 2
85-693-8771: RNCC: 6 | RNVC: 9

21 Nov 1991

5120-14-574-2407
Socket Head Screw Key

145742407
89S.40: RNCC: 3 | RNVC: 2
126980: RNCC: 5 | RNVC: 2
3148511269800: RNCC: 5 | RNVC: 2

18 Dec 2012

5120-14-285-6302

5120-14-577-2627
Cross Tip Screwdriver

145772627
AND1X75: RNCC: 3 | RNVC: 2
3148517736283: RNCC: 5 | RNVC: 2
773628: RNCC: 5 | RNVC: 2

29 Aug 2013

5120-14-438-2900

5120-14-457-4885
Face Spanner Wrench Socket

144574885
LYN003044011020: RNCC: 3 | RNVC: 2

9 Sep 1992

5120-14-527-1437
Mechanical Puller Attachment

145271437
884359: RNCC: 3 | RNVC: 2
SYB4152: RNCC: 5 | RNVC: 2
884359-1: RNCC: 5 | RNVC: 2
884359: RNCC: 5 | RNVC: 9

5 Oct 2001

5120-14-239-6362

5120-14-416-8871
Face Spanner Wrench Socket

144168871
46AM098: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-537-3230
Open End Wrench

145373230
TN20856 K6111 0026: RNCC: 3 | RNVC: 2

20 Oct 2003

5120-14-375-8024
Bearing And Bushing Inserter

143758024
300A97136: RNCC: 3 | RNVC: 2
91371578: RNCC: 5 | RNVC: 2
300A97136: RNCC: 5 | RNVC: 2
300A97136: RNCC: 5 | RNVC: 9
300A97136: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-314-8173
Electrical Contact Remover

143148173
594: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-515-8823
Spring Inserter And Remover

145158823
12701007: RNCC: 3 | RNVC: 2

23 Aug 1999

5120-14-397-4860
Calibre De Controle

143974860
73030005: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-256-8892

5120-14-311-5288

5120-14-364-2643
Open End Wrench

143642643
10-36X37-P: RNCC: 3 | RNVC: 2
10-36X37CP: RNCC: 3 | RNVC: 2
4071-36X37CB: RNCC: 3 | RNVC: 9
10-36X37P: RNCC: 5 | RNVC: 2
3272670226579: RNCC: 5 | RNVC: 2
10-36X37CP: RNCC: 5 | RNVC: 9
85-800-8695: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-317-0374
Pince De Bridage

143170374
RT4751: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-219-4171
Cle Embout De Verin

142194171
92546: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-490-8986
Boite

144908986
4068 390 000 044: RNCC: 3 | RNVC: 2
F300 0T 000 5280: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-269-5369

5120-14-272-3721

5120-14-423-2278
Basculeur Cle Dyn

144232278
0747160: RNCC: 3 | RNVC: 2
SP.1735 D-3-1090: RNCC: 5 | RNVC: 2
SP1735D-3-1090: RNCC: 5 | RNVC: 2

13 Apr 1988

5120-14-218-1832
Spanner Wrench

142181832
17-9-143: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-274-7878
Flat Tip Screwdriver

142747878
E74-351-0-8X5X150R0NDEIS0LEE: RNCC: 2 | RNVC: 2
TG51: RNCC: 3 | RNVC: 2
707-5X150: RNCC: 3 | RNVC: 9
1-31-51: RNCC: 5 | RNVC: 2
SYQ0693: RNCC: 5 | RNVC: 2
253GI6: RNCC: 5 | RNVC: 2
DEM707-5X150: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-454-9405
Socket Head Screw Key

144549405
84E.1,3X35: RNCC: 3 | RNVC: 2
3148511254042: RNCC: 5 | RNVC: 2
243-904: RNCC: 5 | RNVC: 2
0125404: RNCC: 5 | RNVC: 9
FACOM84E.1,3X35: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-495-5184
Cle

144955184
NO PRIMARY REF14-495-5184: RNCC: 3 | RNVC: 2
036 201 10: RNCC: 5 | RNVC: 9
F300 0T 019 4186: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-399-5285
Mont Conn Outillage

143995285
3640: RNCC: 3 | RNVC: 2
120-6962: RNCC: 5 | RNVC: 2

6 Mar 1985

5120-14-366-0253
Outil De Tarage

143660253
NO PRIMARY REF14-366-0253: RNCC: 3 | RNVC: 2
42-25-04-067M1: RNCC: 5 | RNVC: 9

4 Nov 1980

5120-14-245-8557

5120-14-457-5495
Cle

144575495
37933: RNCC: 3 | RNVC: 2

10 Sep 1992

5120-14-368-5975
Outil Bague De Biel

143685975
25545980600: RNCC: 3 | RNVC: 2
255459806: RNCC: 5 | RNVC: 9

20 Feb 1981

5120-14-453-6197
Brosse Soudeur

144536197
151134: RNCC: 3 | RNVC: 2

3 Mar 1992

5120-14-570-6415
Screwdriver Bit

145706415
EH.002: RNCC: 3 | RNVC: 2
0023154: RNCC: 5 | RNVC: 2
3148510231549: RNCC: 5 | RNVC: 2

13 Jan 2012

5120-14-430-3454
Emmanche Roulement

144303454
RT17392: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-508-3303
Open End Wrench

145083303
0460451F00: RNCC: 3 | RNVC: 2
SA 65-7-01 0460451F: RNCC: 5 | RNVC: 2

4 Sep 1998

5120-14-418-0353

5120-14-414-9616

5120-14-415-6264

5120-14-578-6750
Plastic Mallet

145786750
522453: RNCC: 3 | RNVC: 2
131524: RNCC: 5 | RNVC: 2

18 Dec 2013

5120-14-490-8679
Meche

144908679
4057 020 003 459: RNCC: 3 | RNVC: 2
F300 0T 000 4917: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-308-2177

5120-14-208-9781

5120-14-359-3100
Hand Terminal Crimping Tool

143593100
80610078828: RNCC: 3 | RNVC: 2
3440: RNCC: 5 | RNVC: 2

2 Oct 1979

5120-14-264-9584
Spanner Wrench

142649584
0298-78: RNCC: 3 | RNVC: 2
RA298: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-542-9618
Bearing And Bushing Inserter And Remover

145429618
834053: RNCC: 3 | RNVC: 2

14 Aug 2004

5120-14-384-6311
Electrical Card Extractor

143846311
16928963: RNCC: 3 | RNVC: 2
16928963: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-383-4671
Electrical Card Extractor

143834671
20198013: RNCC: 3 | RNVC: 2
20198013: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-260-0121
Cle Dejecteur

142600121
80900-400: RNCC: 3 | RNVC: 2
79464: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-242-9480

5120-14-352-2004

5120-14-400-1931
Outil Compres Menbr

144001931
330A93-5800-00: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-359-4237
Plumber's Force Cup

143594237
NO PRIMARY REF14-359-4237: RNCC: 3 | RNVC: 2
36-1040-2: RNCC: 5 | RNVC: 9

2 Oct 1979

5120-14-426-0742
Sangle Outil Electr

144260742
8498-103: RNCC: 3 | RNVC: 2

2 Aug 1988

5120-14-245-2343

5120-14-241-6038

5120-14-385-8414

5120-14-219-0241
Tournevis Special

142190241
7341185: RNCC: 3 | RNVC: 2
7341185: RNCC: 3 | RNVC: 9
7341185: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-491-0166
Cle

144910166
4602 007 200 291: RNCC: 3 | RNVC: 2
F300 0T 001 0954: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-311-2041
Extracteur Clapet

143112041
R31940: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-365-9931

5120-14-401-5199
Fixed Open End Wrench Set

144015199
NO PRIMARY REF14-401-5199: RNCC: 3 | RNVC: 2
44JE12CP: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-343-6374
Detent Handling Tool

143436374
330A93-2031-00: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-348-2872
Tete Triangulai Cle

5120-14-203-1379
Socket Wrench Socket

142031379
K.54A: RNCC: 3 | RNVC: 2
3148510295251: RNCC: 5 | RNVC: 2
91467035: RNCC: 5 | RNVC: 2
91638855: RNCC: 5 | RNVC: 2
0029525: RNCC: 5 | RNVC: 9
K54: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-290-8604

5120-14-216-7225
Socket Wrench Socket

142167225
S.21/32: RNCC: 3 | RNVC: 2
S21-32: RNCC: 5 | RNVC: 2
3148510544205: RNCC: 5 | RNVC: 2
0054420: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-440-7034
Pointeau Equipe

144407034
242427: RNCC: 3 | RNVC: 2

18 Jul 1990

5120-14-317-7941
Cle De Maintien

143177941
NO PRIMARY REF14-317-7941: RNCC: 3 | RNVC: 2
800432-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-220-8535
Fausse Fusee Pour R

142208535
PR46421: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-505-9338
Preformed Packing Inserter

145059338
H117121C: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-448-8515
Socket Head Screw Key Set

144488515
62-TR10: RNCC: 3 | RNVC: 2
62TR10: RNCC: 3 | RNVC: 2
3272670290877: RNCC: 5 | RNVC: 2

22 Jul 1991

5120-14-401-8572
Support Et Centreur

144018572
NO PRIMARY REF14-401-8572: RNCC: 3 | RNVC: 2
43279093: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-571-6890
Spatula

145716890
RD-MJ-KT01: RNCC: 3 | RNVC: 2

23 Apr 2012

5120-14-417-0130
Spanner Wrench

144170130
J05107-03S120: RNCC: 3 | RNVC: 2
J05107-03-0000S120: RNCC: 5 | RNVC: 2

25 Jun 1987

5120-14-514-8389
Cross Tip Screwdriver

145148389
ENFD6568-1X300: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-490-8739
Cle

144908739
4065 030 000 769: RNCC: 3 | RNVC: 2
F300 0T 000 4988: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-578-3583
Socket Wrench Socket

145783583
NS.21LA: RNCC: 3 | RNVC: 2

22 Nov 2013

5120-14-416-7713
Metallique Poincon

144167713
537354: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-565-4028
Hand Beading Tool

145654028
037610: RNCC: 3 | RNVC: 2
376 10: RNCC: 5 | RNVC: 2
37610: RNCC: 5 | RNVC: 9

13 Aug 2010

5120-14-559-9068
Flat Tip Screwdriver

145599068
AN6,5X300: RNCC: 3 | RNVC: 2
3148517754478: RNCC: 5 | RNVC: 2
775447: RNCC: 5 | RNVC: 2

4 Mar 2009

5120-14-263-8160

5120-14-274-8661

5120-14-572-8451
Socket Wrench Socket

145728451
320022: RNCC: 3 | RNVC: 2
7612206014809: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-285-5506

5120-14-497-8700
Cable

144978700
F300 0T 022 9434: RNCC: 3 | RNVC: 2
45525626: RNCC: 5 | RNVC: 2

22 Oct 1997

5120-14-284-3352

5120-14-224-9881

5120-14-518-0235
Six Point Tip Screwdriver

145180235
ENFD6576-25X110: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-327-2331
Socket Head Screw Key

143272331
P250A1082: RNCC: 3 | RNVC: 2
P250A1082: RNCC: 5 | RNVC: 2
85-505-6002: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-389-8514
Montag Join Spatule

143898514
M24-019: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-356-4938
Piston Ring Expander

143564938
349-101: RNCC: 3 | RNVC: 2
349-101: RNCC: 5 | RNVC: 9

15 May 1979

5120-14-513-4115
Socket Head Screw Key

145134115
NO PRIMARY REF14-513-4115: RNCC: 3 | RNVC: 2
NNP 5120860464856: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-429-1533
De Dressage Tas

144291533
548946: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-288-2870

5120-14-370-3293
Spanner Wrench

143703293
5000502785: RNCC: 3 | RNVC: 2
5000502785: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-285-4549
Spanner Wrench

142854549
HE60X15: RNCC: 3 | RNVC: 2
531451: RNCC: 5 | RNVC: 2
HE60X15: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-490-8651
Outil

144908651
4051 090 004 376: RNCC: 3 | RNVC: 2
F300 0T 000 4888: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-233-7703
Arrache Roulement C

142337703
NO PRIMARY REF14-233-7703: RNCC: 3 | RNVC: 2
12C8002: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-413-5822
Socket Head Screw Key

144135822
803-2: RNCC: 3 | RNVC: 2
80302: RNCC: 5 | RNVC: 2
803-2: RNCC: 5 | RNVC: 2

17 Dec 1986

5120-14-352-0244
Tube Packing Ring Installing Tool

143520244
330A93-2016-00: RNCC: 3 | RNVC: 2

16 Oct 1978

5120-14-567-5701
Socket Head Screw Key

145675701
260742392: RNCC: 3 | RNVC: 2

25 Mar 2011

5120-14-285-5956

5120-14-319-4922

5120-14-289-3345
Cheville-Vis

142893345
DM23537DCMATAR70: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-377-0643
Embout Outil Demont

143770643
0187-047-000: RNCC: 3 | RNVC: 2

28 Apr 1982

5120-14-432-8581
Spanner Wrench

144328581
853-912-004-0: RNCC: 3 | RNVC: 2

28 Jun 1989

5120-14-272-3644
Open End Wrench

142723644
E74302C11-14WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-248-7224

5120-14-444-4561
Open End Wrench

144444561
231444: RNCC: 3 | RNVC: 2
85-694-3558: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-225-4040

5120-14-283-9713
Cloche Extracteur

142839713
MS534-104: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-417-1287
Levier Outil

144171287
547951: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-215-0225

5120-14-407-3297
Joints Emmanche

144073297
853-201-198-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-486-6092
De Serrag Outillage

144866092
Z0107-574: RNCC: 3 | RNVC: 2

26 Mar 1997

5120-14-427-0604
Socket Head Screw Key

144270604
M4Z6021904801: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-397-4865
Terminal Crimping Tool Contact Positioner

143974865
73040027: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-376-2328

5120-14-529-2696
Cross Tip Screwdriver

145292696
AZP.4X200: RNCC: 3 | RNVC: 2
3148510134536: RNCC: 5 | RNVC: 2
AZP-4X200: RNCC: 5 | RNVC: 2

20 Mar 2002

5120-14-232-2218

5120-14-280-1400

5120-14-420-9878
Outil Reglage Noyau

144209878
16805942: RNCC: 3 | RNVC: 2
16805942: RNCC: 3 | RNVC: 9

6 Jan 1988

5120-14-497-9816
Cable

144979816
F300 0T 022 9437: RNCC: 3 | RNVC: 2
45525634: RNCC: 5 | RNVC: 2

29 Oct 1997

Load More Results