What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 75 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 75 of 110

5120-14-473-0615
Socket Head Screw Key

144730615
82H.0,9: RNCC: 3 | RNVC: 2
1062887L00: RNCC: 5 | RNVC: 2
3148511229712: RNCC: 5 | RNVC: 2
SYQ0089: RNCC: 5 | RNVC: 2
91777985: RNCC: 5 | RNVC: 2
FACOM 82H09: RNCC: 5 | RNVC: 2
0122971: RNCC: 5 | RNVC: 9
958 237 001 001: RNCC: 6 | RNVC: 9

7 Dec 1994

5120-14-552-5675
Socket Wrench Socket Set

145525675
CDX.2: RNCC: 3 | RNVC: 2

17 Jan 2007

5120-14-390-5874
Extracteur De Multi

143905874
33380A: RNCC: 3 | RNVC: 2
33380: RNCC: 5 | RNVC: 2

26 Jan 1984

5120-14-563-8669
Handling Tool Arm

145638669
82495432000: RNCC: 3 | RNVC: 2

23 Mar 2010

5120-14-578-2863
Socket Wrench Socket

145782863
S48548: RNCC: 3 | RNVC: 2

18 Nov 2013

5120-14-308-8215
Spanner Wrench

143088215
MUP5137: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-573-7708
Socket Head Screw Key

145737708
21530805200: RNCC: 3 | RNVC: 2
MW1389A00: RNCC: 5 | RNVC: 2

9 Nov 2012

5120-14-478-5839
Montage Cone

144785839
100-540: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-373-7833

5120-14-421-2768
Hand Tube Flaring Tool

144212768
500FB: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-495-9072
Leveling-Support Jack

144959072
F00151962: RNCC: 3 | RNVC: 2
F00151962: RNCC: 5 | RNVC: 9
F300 0T 020 4725: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-397-4787
Spanner Wrench

143974787
M334-01-86-15: RNCC: 3 | RNVC: 2
453-65039-000: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-295-2905
Cle Speciale

142952905
M198-1-10-24: RNCC: 3 | RNVC: 2
134043: RNCC: 5 | RNVC: 2
530183: RNCC: 5 | RNVC: 2
M198-1-1024: RNCC: 5 | RNVC: 2
M262-10-24: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-535-0092
Face Spanner Wrench Socket

145350092
26-652: RNCC: 3 | RNVC: 2

25 Apr 2003

5120-14-280-3947
Spanner Wrench

142803947
45257: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-402-3177
Face Spanner Wrench Socket

144023177
0754095E00: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-238-1391
Spanner Wrench

142381391
874082A: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-540-5484
Hand Pipe And Sewer Auger

145405484
2907 10: RNCC: 3 | RNVC: 2
2907100: RNCC: 5 | RNVC: 9

1 Apr 2004

5120-14-355-2156
Spanner Wrench

143552156
212781: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-466-1634
Socket Wrench Socket

144661634
8509-00-202: RNCC: 3 | RNVC: 2
89297975: RNCC: 5 | RNVC: 2

27 Oct 1993

5120-14-517-2327
Socket Wrench Screwdriver Attachment

145172327
80-301083: RNCC: 3 | RNVC: 2

22 Nov 1999

5120-14-347-7181
Combination Box And Open End Wrench

143477181
0EXM120: RNCC: 3 | RNVC: 2
0EX120M: RNCC: 5 | RNVC: 1
0EXM120: RNCC: 5 | RNVC: 1
0EX120M: RNCC: 5 | RNVC: 2
85-689-7090: RNCC: 6 | RNVC: 9

1 Mar 1978

5120-14-315-1255
Outil Calage Av Mat

143151255
MD003-10-00REP7: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-319-5798
Socket Head Screw Key

143195798
213-23-265-049: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-326-2770
Bearing And Bushing Inserter

143262770
330A98-3107-00: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-442-8284
Cross Tip Screwdriver

144428284
GS205-2: RNCC: 3 | RNVC: 2
1.70.3310: RNCC: 5 | RNVC: 2
GS205-02: RNCC: 5 | RNVC: 2

6 Nov 1990

5120-14-325-2812
Screwdriver Bit Set And Handle

143252812
NO PRIMARY REF14-325-2812: RNCC: 3 | RNVC: 2
1520: RNCC: 5 | RNVC: 2
51-5: RNCC: 5 | RNVC: 9
85-679-5610: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-523-0047
Pneumatic Tire Valve Core Inserter And Remover

145230047
37948-68: RNCC: 3 | RNVC: 2
S 4392-2: RNCC: 5 | RNVC: 2
994034: RNCC: 5 | RNVC: 2

14 Dec 2000

5120-14-531-6574
Socket Wrench Socket

145316574
S.19F: RNCC: 3 | RNVC: 2
3148510538273: RNCC: 5 | RNVC: 2

11 Sep 2002

5120-14-249-9434
Socket Wrench Socket

142499434
M.67: RNCC: 3 | RNVC: 2
3148510318509: RNCC: 5 | RNVC: 2
M67: RNCC: 5 | RNVC: 2
0031850: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-437-7777
Screwdriver Bit

144377777
0024102: RNCC: 3 | RNVC: 2
27662-1: RNCC: 5 | RNVC: 2
EP.603: RNCC: 5 | RNVC: 2
823103: RNCC: 5 | RNVC: 2

20 Feb 1990

5120-14-380-8926
Electrical Contact Remover

143808926
91066-4: RNCC: 3 | RNVC: 2
91066-4: RNCC: 5 | RNVC: 2

14 Dec 1982

5120-14-489-3761
Hose Strap Band Clamping Tool

144893761
DM.14: RNCC: 3 | RNVC: 2
208-4: RNCC: 3 | RNVC: 2
208.4: RNCC: 3 | RNVC: 2
3148510199122: RNCC: 5 | RNVC: 2
3272670356047: RNCC: 5 | RNVC: 2
0019912: RNCC: 5 | RNVC: 9

16 Jul 1997

5120-14-234-3388
Chasse Montage De J

142343388
30454B: RNCC: 3 | RNVC: 2
202410: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-386-1590
Bearing And Bushing Inserter

143861590
6801P32-1679-01: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-382-8547
Reglage Cle

143828547
9970-121-180: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-434-3555
Slip Joint Pliers

144343555
176.CPY: RNCC: 3 | RNVC: 2
0140620: RNCC: 5 | RNVC: 2
18509490-0: RNCC: 5 | RNVC: 2

20 Sep 1989

5120-14-510-6877
Spanner Wrench

145106877
PB.MOD40-1: RNCC: 3 | RNVC: 2

4 Nov 1998

5120-14-529-4106
Socket Wrench Screwdriver Attachment

145294106
RPC.2: RNCC: 3 | RNVC: 2
3148510532585: RNCC: 5 | RNVC: 2

29 Mar 2002

5120-14-530-2016
Socket Wrench Socket

145302016
B.J21-1: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-324-4926
Cone De Guidage

143244926
C47482: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-228-0785
Bloc De Pre-Sertiss

142280785
RPS4F10X1K: RNCC: 3 | RNVC: 2
RPS4F8X10K: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-493-1823
Cle

144931823
229538X: RNCC: 3 | RNVC: 2
F300 0T 011 0142: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-268-1396

5120-14-270-6333

5120-14-243-6614
Extracteur De Garni

142436614
2G104033REP6AU9: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-241-6030
Bloc De Presertissa

142416030
RMPS4F2X4M: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-547-1991
Piston Ring Compressor

145471991
1548125-2: RNCC: 3 | RNVC: 2

4 Oct 2005

5120-14-239-5212

5120-14-430-3474
Cle De Montage

144303474
RT33183: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-274-1054
Face Spanner Wrench Socket

142741054
12132J: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-497-2019
Socket Wrench Handle Bar

144972019
56202: RNCC: 3 | RNVC: 2
F300 0T 022 8208: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-486-5680
Outillage

144865680
RT21781: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-373-4931
Support De Comparat

143734931
212665: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-425-9271
Poussoir

144259271
600168: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-393-0282
Combination Box And Open End Wrench

143930282
41.22: RNCC: 3 | RNVC: 2
3148511013694: RNCC: 5 | RNVC: 2
41-22: RNCC: 5 | RNVC: 2
0184655R00: RNCC: 5 | RNVC: 2
BLC23087: RNCC: 5 | RNVC: 2
91564519: RNCC: 5 | RNVC: 2
0101369: RNCC: 5 | RNVC: 9

12 Apr 1984

5120-14-329-3593
Cle Speciale

143293593
NO PRIMARY REF14-329-3593: RNCC: 3 | RNVC: 2
983-78: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-317-5219
Spanner Wrench

143175219
0U50118: RNCC: 3 | RNVC: 2
50118: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-532-2552
Bearing And Bushing Inserter And Remover

145322552
287160438: RNCC: 3 | RNVC: 2
716043: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-571-7351
Screwdriver Bit

145717351
NEV-2-2: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-429-9391
A Levie Serre-Joint

144299391
G40H: RNCC: 3 | RNVC: 2

17 Feb 1989

5120-14-558-7384
Jaw Cable Grip

145587384
W3-2: RNCC: 3 | RNVC: 2

29 Oct 2008

5120-14-352-7994
Bloc Pre-Sertissage

143527994
RPS3F8X0-8K: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-479-0632
Face Spanner Wrench Socket

144790632
OCE82-16J: RNCC: 3 | RNVC: 2
1115959R00: RNCC: 5 | RNVC: 2

13 Dec 1995

5120-14-450-7483
Flat Tip Screwdriver

144507483
NO PRIMARY REF14-450-7483: RNCC: 3 | RNVC: 2
642500: RNCC: 5 | RNVC: 9
EM.12X250: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-385-9529
Hydraulic Jack Handle

143859529
622-015: RNCC: 3 | RNVC: 2
01-2030: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-391-6465
Open End Wrench

143916465
44-27X29CP: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-363-9936
Bearing Staking Installation Tool

143639936
341A93-3227-20: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-380-6813
Rallonge Pr Extract

143806813
U32-R2C: RNCC: 3 | RNVC: 2

29 Nov 1982

5120-14-494-0624
Support

144940624
NO PRIMARY REF14-494-0624: RNCC: 3 | RNVC: 2
029S20310: RNCC: 5 | RNVC: 9
F300 0T 015 2815: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-376-0489
Face Spanner Wrench Socket

143760489
TMY20-56-301: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-269-5388

5120-14-565-4976
Mechanical Puller

145654976
332A92-1408-00: RNCC: 3 | RNVC: 2

25 Aug 2010

5120-14-439-3807
Torque Wrench Adapter

144393807
MHD537-21: RNCC: 3 | RNVC: 2
85-694-0427: RNCC: 6 | RNVC: 9

25 Apr 1990

5120-14-396-9690
Spanner Wrench

143969690
9110-1661: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-292-0787
Outillage Verificat

142920787
NO PRIMARY REF14-292-0787: RNCC: 3 | RNVC: 2
BG41: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-302-4004
Screwdriver Bit Set And Handle

143024004
703A95-0000-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-210-7126
Blacksmith's Bottom Fuller

142107126
3840-55: RNCC: 3 | RNVC: 2
M0B20-700: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-459-3277
Flat Tip Screwdriver

144593277
NO PRIMARY REF14-459-3277: RNCC: 3 | RNVC: 2
0010300: RNCC: 5 | RNVC: 2
AR.8X125: RNCC: 5 | RNVC: 2
AR8X125: RNCC: 5 | RNVC: 2
AR8X125: RNCC: 5 | RNVC: 2
91713032: RNCC: 5 | RNVC: 2
AR8X125: RNCC: 5 | RNVC: 2

25 Nov 1992

5120-14-209-4622
Socket Head Screw Key

142094622
NO PRIMARY REF14-209-4622: RNCC: 3 | RNVC: 2
21622: RNCC: 5 | RNVC: 9
21622: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-305-9823
Spanner Wrench

143059823
M24-017: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-323-4465
Spanner Wrench

143234465
M16-026: RNCC: 3 | RNVC: 2
M16-026: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-490-8725
Cle A D

144908725
4065 030 000 060: RNCC: 3 | RNVC: 2
F300 0T 000 4965: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-281-2905

5120-14-289-3827

5120-14-267-6350

5120-14-531-6233
Socket Wrench Socket

145316233
S.11F: RNCC: 3 | RNVC: 2
3148510538037: RNCC: 5 | RNVC: 2

4 Sep 2002

5120-14-563-7752
Combination Box And Open End Wrench

145637752
440.1/4: RNCC: 3 | RNVC: 2
0768255: RNCC: 5 | RNVC: 2
3148517682559: RNCC: 5 | RNVC: 2

12 Mar 2010

5120-14-379-3641
A Fourch Tournevis

143793641
004333005P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-381-5071
Bague Repe Aiguille

143815071
SMJ4: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-397-7236

5120-14-407-3667

5120-14-406-6413

5120-14-307-4722
Screwdriver Bit

143074722
506-4: RNCC: 3 | RNVC: 9
506N4: RNCC: 5 | RNVC: 2
MUL506-4: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-245-8599

5120-14-231-9967

5120-14-249-3925
Spanner Wrench

142493925
3210-95-33-001-2: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-380-3977
Electrical Contact Remover

143803977
282891: RNCC: 3 | RNVC: 2
85-800-9693: RNCC: 6 | RNVC: 9

8 Nov 1982

5120-14-471-5070
Open End Wrench

144715070
006503210M: RNCC: 3 | RNVC: 2

31 Aug 1994

5120-14-375-7860

5120-14-323-1304

5120-14-314-2339
Socket Wrench Crowfoot Attachment

143142339
160-71960-04: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-288-1884
Outillage Dessais

142881884
NO PRIMARY REF14-288-1884: RNCC: 3 | RNVC: 2
F47079: RNCC: 5 | RNVC: 9
RT21496: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-495-2028
Marteau

144952028
NO PRIMARY REF14-495-2028: RNCC: 3 | RNVC: 2
MH83: RNCC: 5 | RNVC: 9
F300 0T 018 6408: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-385-3342
Reglage Collerette

143853342
365A93-3114-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-260-3634
Bearing And Bushing Inserter And Remover

142603634
3130-95-12-161: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-272-3944
Combination Box And Open End Wrench

142723944
40.33L: RNCC: 3 | RNVC: 2
3148511011546: RNCC: 5 | RNVC: 2
40-33L: RNCC: 5 | RNVC: 2
0101154: RNCC: 5 | RNVC: 9
40-33: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-324-6616
Hand Blind Riveter

143246616
NO PRIMARY REF14-324-6616: RNCC: 3 | RNVC: 2
7800420: RNCC: 5 | RNVC: 9
TT55A: RNCC: 5 | RNVC: 9
TT55C: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-424-0666
Collier Pr Montage

144240666
75545812500: RNCC: 3 | RNVC: 2
755458125: RNCC: 5 | RNVC: 9

11 May 1988

5120-14-402-4122
Torque Wrench Adapter

144024122
MHD459-27: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-385-3341
Out Reglage Rotule

143853341
365A93-3114-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-363-1524
Electrical Contact Inserter

143631524
M15570-108: RNCC: 3 | RNVC: 2
85-689-8614: RNCC: 6 | RNVC: 9

3 Apr 1980

5120-14-532-3854
Socket Wrench Socket

145323854
MHJ621-24: RNCC: 3 | RNVC: 2

30 Oct 2002

5120-14-460-0194
Socket Head Screw Key

144600194
120005-SERT-7054: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-14-212-9091
Emmanche-Joint Tori

142129091
9970-115-181: RNCC: 3 | RNVC: 2
9970-115-181-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-515-4479
Jeu De Cles

145154479
22320910-1: RNCC: 3 | RNVC: 2

13 Jul 1999

5120-14-404-1186

5120-14-408-9619

5120-14-411-9448

5120-14-215-2409
Guide Special

142152409
PR46488: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-425-9248
Mandrin Emmanchemen

144259248
600102: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-490-8687
Meche

144908687
4057 020 003 468: RNCC: 3 | RNVC: 2
F300 0T 000 4925: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-227-2440
Extracteur Special

142272440
31429A: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-332-6575
Extracteur Chemise

143326575
32435: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-236-2439

5120-14-237-9809

5120-14-248-5665

5120-14-513-9466
Flat Tip Screwdriver

145139466
ENFD6560-1-2X8X200: RNCC: 3 | RNVC: 2

19 Apr 1999

5120-14-464-9156
Sheet Metalworking Stake

144649156
851-930-691-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-308-3265
Dynamometre A Palpe

143083265
DM10-50: RNCC: 3 | RNVC: 2
CHA9623E: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-384-2939
Sertissage Matrice

143842939
TN70V13: RNCC: 3 | RNVC: 2
TN70-13: RNCC: 5 | RNVC: 2

4 May 1983

5120-14-215-3045
Spanner Wrench

142153045
2228-70-15: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-515-5344
Final Drive Assembly Alignment Pin

145155344
150G4366: RNCC: 3 | RNVC: 2

21 Jul 1999

5120-14-247-9659
Cle A Fourche

142479659
RT20923: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-573-5241
Screwdriver Bit Holder

145735241
E-112-TJ10: RNCC: 3 | RNVC: 2

18 Oct 2012

5120-14-223-2550
Cle Pour Ecrou De T

142232550
D1054-5933: RNCC: 3 | RNVC: 2
D1054-5933: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-200-2700
Cle De Fusee Vdixhu

142002700
AMG16476-2: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-520-7027
Tube Packing Ring Installing Tool

145207027
8819349000: RNCC: 3 | RNVC: 2

31 May 2000

5120-14-507-0340
Retaining Ring Pliers

145070340
199G.18: RNCC: 3 | RNVC: 2
0714 02 54: RNCC: 5 | RNVC: 2
3148511460979: RNCC: 5 | RNVC: 2

3 Jun 1998

5120-14-390-7953
Open End Wrench

143907953
065U20-623252S: RNCC: 3 | RNVC: 2

1 Mar 1984

5120-14-245-7088

5120-14-492-7331
Cliquet

144927331
NO PRIMARY REF14-492-7331: RNCC: 3 | RNVC: 2
1223A204: RNCC: 5 | RNVC: 9
F300 0T 008 6854: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-222-7180
Open End Wrench

142227180
NO PRIMARY REF14-222-7180: RNCC: 3 | RNVC: 2
1144-14X17: RNCC: 5 | RNVC: 9
BB76: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-386-1557
Bearing And Bushing Inserter

143861557
6801J32-3036-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-231-7334
Hand Terminal Crimping Tool

142317334
8498-03: RNCC: 3 | RNVC: 2
809720: RNCC: 3 | RNVC: 2
529-10: RNCC: 5 | RNVC: 2
91453288: RNCC: 5 | RNVC: 2
5000888543: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-272-7578
Spanner Wrench

142727578
D1553-4811: RNCC: 3 | RNVC: 2
D1553-4811: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-212-0752
Spanner Wrench

142120752
26-215: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-514-0198
Open End Wrench

145140198
ENFD29159-30X31: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-283-1679
Cle Speciale

142831679
761-3M735P12: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-510-1371
Flat Tip Screwdriver

145101371
NO PRIMARY REF14-510-1371: RNCC: 3 | RNVC: 2
1703038: RNCC: 5 | RNVC: 9
5120AA8011065: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-417-0128
Spanner Wrench

144170128
J05107-03S118: RNCC: 3 | RNVC: 2
J05107-03-0000S118: RNCC: 5 | RNVC: 2

25 Jun 1987

5120-14-348-7720
Pliers

143487720
402: RNCC: 3 | RNVC: 2
5151-14: RNCC: 3 | RNVC: 2
3148511750308: RNCC: 5 | RNVC: 2
91381490: RNCC: 5 | RNVC: 2
0175030: RNCC: 5 | RNVC: 9
175030402: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-14-349-8657
Spanner Wrench

143498657
0427-02001: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-440-5450
Cle

144405450
51980: RNCC: 3 | RNVC: 2
85-694-1114: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-460-0197
Inserted Hammer Face Holder

144600197
120000-SERT-7057: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-14-401-5645
Emmanchement Obus

144015645
350A93-3400-00: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-528-6750
Socket Head Screw Key

145286750
82H.9/16: RNCC: 3 | RNVC: 2
SYQ0762: RNCC: 5 | RNVC: 2

5 Feb 2002

5120-14-438-9562
Seal Inserter And Remover

144389562
101065: RNCC: 3 | RNVC: 2
C66290: RNCC: 5 | RNVC: 2

11 Apr 1990

5120-14-437-0679
Open End Wrench

144370679
11156: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-375-8061
Spanner Wrench

143758061
300A99107: RNCC: 3 | RNVC: 2
91386588: RNCC: 5 | RNVC: 2
300A99107: RNCC: 5 | RNVC: 2
300A99107: RNCC: 5 | RNVC: 9
300A99107: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-318-6248
Spanner Wrench

143186248
C46319: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-313-7223
Spanner Wrench

143137223
C47016: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-459-1617
Bearing Staking Installation Tool

144591617
45056161: RNCC: 3 | RNVC: 2
45056161: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-561-3003
Face Spanner Wrench Socket

145613003
98F53301000000: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-14-375-3130

5120-14-428-5288
Fixation Support

144285288
MJN3462408: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-350-0275
Mechanical Puller Attachment

143500275
3130S98-03-001-1: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-515-5336
Final Drive Assembly Alignment Pin

145155336
150G4357: RNCC: 3 | RNVC: 2

21 Jul 1999

5120-14-375-8480

5120-14-458-3085
Bearing And Bushing Remover

144583085
45056107: RNCC: 3 | RNVC: 2
45056107: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-313-5805
Socket Wrench Crowfoot Attachment

143135805
C47291: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-498-1490
Collection

144981490
002390004S: RNCC: 3 | RNVC: 2
00239004S: RNCC: 3 | RNVC: 2
F300 0T 004 2927: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-436-0177
Emmanche Pion

144360177
RT30006: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-284-9908
Socket Wrench Extension

142849908
NK.210: RNCC: 3 | RNVC: 2
3148510375601: RNCC: 5 | RNVC: 2
NK210: RNCC: 5 | RNVC: 2
0714 14 17: RNCC: 5 | RNVC: 2
0037560: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-270-7912
Hand Lead Seal Press

142707912
PINCEAPL0MBERMATM0B15CAP231100: RNCC: 3 | RNVC: 2
PINCEAPL0MBERMATM0B15CAP233100: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-536-5784
Final Drive Assembly Alignment Pin

145365784
DA6763: RNCC: 3 | RNVC: 2

2 Sep 2003

5120-14-471-4449
Mattock

144714449
41M722+MP900: RNCC: 3 | RNVC: 2
5000496347: RNCC: 5 | RNVC: 2

25 Aug 1994

5120-14-371-9739
Pion Centrag Poseur

143719739
8813216000: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-246-9451

5120-14-466-4852
Socket Wrench Handle

144664852
1079425W00: RNCC: 3 | RNVC: 2

15 Nov 1993

5120-14-421-7315
Socket Wrench Socket

144217315
8815804000: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-505-9507
Bearing And Bushing Inserter And Remover

145059507
H117154B: RNCC: 3 | RNVC: 2

31 Mar 1998

5120-14-434-9975
Socket Wrench Screwdriver Attachment

144349975
8815407000: RNCC: 3 | RNVC: 2
89415029: RNCC: 5 | RNVC: 2

11 Oct 1989

5120-14-548-6767
Handling Tool Arm

145486767
10466619001: RNCC: 3 | RNVC: 2

30 Jan 2006

5120-14-220-7915
Open End Wrench

142207915
RACD35: RNCC: 3 | RNVC: 2
RACD35: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-217-9933
Torque Wrench Adapter

142179933
D010: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-422-2311
Spanner Wrench

144222311
0471-204900: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-242-0570
Spanner Wrench

142420570
DLP751080: RNCC: 3 | RNVC: 2
DLT001953: RNCC: 5 | RNVC: 2
DLT01953: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-544-9307
Flat Tip Screwdriver

145449307
624040: RNCC: 3 | RNVC: 2

7 Mar 2005

5120-14-235-8655

5120-14-272-3645
Open End Wrench

142723645
E74302C12-13WWW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-263-2612

5120-14-241-1640
Poincon Monte Conne

142411640
8459-126: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-349-1044
Electrical Contact Remover

143491044
8700-36: RNCC: 3 | RNVC: 2
878420: RNCC: 5 | RNVC: 2
91492566: RNCC: 5 | RNVC: 2
878420: RNCC: 5 | RNVC: 2

19 Apr 1978

5120-14-343-9776
Pose Oeillets Jeu

143439776
15JEUDEP0SE0EILLET15BAS: RNCC: 3 | RNVC: 2
15JEUDEP0SE0EILLET15BAS: RNCC: 5 | RNVC: 9
85-689-3540: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-558-7621
Mechanical Puller Attachment

145587621
MTR01-54: RNCC: 3 | RNVC: 2

3 Nov 2008

5120-14-517-9359
Six Point Tip Screwdriver

145179359
ENFD6577-10X40: RNCC: 3 | RNVC: 2

19 Jan 2000

5120-14-366-5694
Bearing And Bushing Inserter

143665694
360A93-3402-20: RNCC: 3 | RNVC: 2

20 Nov 1980

5120-14-351-9441
Pliers

143519441
99002-13500: RNCC: 3 | RNVC: 2
99002-13500: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-212-9176
Cle Double Pour Rac

142129176
9970-115-049: RNCC: 3 | RNVC: 2
9970-115-049-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-556-0510
Seal Inserter And Remover

145560510
MAT788-4627: RNCC: 3 | RNVC: 2

24 Jan 2008

5120-14-445-5628
Bearing And Bushing Remover

144455628
516301-01: RNCC: 3 | RNVC: 9

18 Feb 1991

5120-14-304-4366
Torque Wrench Adapter

143044366
160-71960-28: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-398-1988
Outil Dextraction

143981988
853-100-053-0: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-479-0624
Retaining Ring Pliers

144790624
0139410: RNCC: 3 | RNVC: 2
167.13: RNCC: 5 | RNVC: 2
0236962R00: RNCC: 5 | RNVC: 2

13 Dec 1995

5120-14-528-7716
Tube Packing Ring Installing Tool

145287716
TM0631G001: RNCC: 3 | RNVC: 2

14 Feb 2002

5120-14-040-4687
Spanner Wrench

140404687
23987: RNCC: 3 | RNVC: 2
23987: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-303-6157
Electrical Card Extractor

143036157
1265024: RNCC: 3 | RNVC: 2
1265024: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-455-8674
Socket Head Screw Key

144558674
397963: RNCC: 3 | RNVC: 2
397963: RNCC: 5 | RNVC: 9

11 Jun 1992

5120-14-283-9298
Spanner Wrench

142839298
HE60X20: RNCC: 3 | RNVC: 2
531452: RNCC: 5 | RNVC: 2
HE60X20: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-420-9583
Vise Jaw Caps

144209583
1287L17522: RNCC: 3 | RNVC: 2
99017522: RNCC: 5 | RNVC: 2
DOL1287L17522: RNCC: 5 | RNVC: 9

6 Jan 1988

5120-14-010-1028
Mechanical Puller Attachment

140101028
8000302001: RNCC: 3 | RNVC: 2
8810253001: RNCC: 5 | RNVC: 2

1 Jan 1961

5120-14-513-3359
Bearing And Bushing Remover

145133359
AC21978000: RNCC: 3 | RNVC: 2

16 Mar 1999

5120-14-302-6694
Open End Wrench

143026694
RACD27: RNCC: 3 | RNVC: 2
RACD27: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-377-7649
Pliers

143777649
187-20Y: RNCC: 3 | RNVC: 2

10 Jun 1982

5120-14-458-3116
Bearing And Bushing Inserter And Remover

144583116
45215415: RNCC: 3 | RNVC: 2
45215415: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-500-6498
Spanner Wrench

145006498
10363989: RNCC: 3 | RNVC: 2
F300 0T 024 6686: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-510-2454
Socket Wrench Socket

145102454
7M308: RNCC: 3 | RNVC: 2
5120AA8017369: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-437-9380
Torque Wrench Adapter

144379380
100963: RNCC: 3 | RNVC: 2
C63303: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-550-8794
Bearing And Bushing Inserter And Remover

145508794
8817251000: RNCC: 3 | RNVC: 2

26 Jul 2006

5120-14-343-1812
Screw Thread Insert Inserter

143431812
01500216400: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-527-5914
Spanner Wrench

145275914
46AM105A: RNCC: 3 | RNVC: 2

30 Oct 2001

5120-14-518-2867
Face Spanner Wrench Socket

145182867
8021172Y00: RNCC: 3 | RNVC: 2

2 Feb 2000

5120-14-310-7176
Electronic Equipment Alignment Tool

143107176
16137103: RNCC: 3 | RNVC: 2
A16137103: RNCC: 3 | RNVC: 2
16137103: RNCC: 3 | RNVC: 9
A16137103: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-238-6756
Spanner Wrench

142386756
E74323A50AGW: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-318-6233
Spanner Wrench

143186233
C46335: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-572-9343
Torque Wrench

145729343
62032933AA: RNCC: 3 | RNVC: 2

29 Aug 2012

5120-14-243-6158

5120-14-561-2450
Slip Joint Pliers

145612450
98F27003001000: RNCC: 3 | RNVC: 2

30 Jun 2009

5120-14-407-2053
Pose Boucho Mandrin

144072053
101280: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-235-8661

5120-14-253-3862
Poignee Pour Cle

142533862
044BBC14BPL2PC19: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-263-2664

5120-14-552-5690
Socket Wrench Socket

145525690
R.8AVSE: RNCC: 3 | RNVC: 2
R.8AVSE: RNCC: 5 | RNVC: 2
3148510517292: RNCC: 5 | RNVC: 2

17 Jan 2007

5120-14-558-9764
Crimping Tool Die

145589764
484093-1: RNCC: 3 | RNVC: 2

26 Nov 2008

5120-14-332-6225
Appareil A Debouche

143326225
9689160159: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-266-7003

5120-14-483-5707
Mecanis Reglage Cle

144835707
F117226A: RNCC: 3 | RNVC: 2

19 Sep 1996

5120-14-224-8027
Open End Wrench

142248027
13-7-8X1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-346-3580
Electrical Contact Remover

143463580
91067-2: RNCC: 3 | RNVC: 2

12 Dec 1977

5120-14-391-6127
Electrical Card Extractor

143916127
20198000: RNCC: 3 | RNVC: 2
20198000: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-576-6118
Mechanical Puller S

145766118
8810382006: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-566-7002
Screw Thread Insert Tang Breakoff Tool

145667002
0516: RNCC: 3 | RNVC: 2
71810160001: RNCC: 5 | RNVC: 2

8 Dec 2010

5120-14-236-6360

5120-14-219-7410

5120-14-473-5700
Cle De Serrage

144735700
0600039AC-Z025: RNCC: 3 | RNVC: 9
RAB3519: RNCC: 5 | RNVC: 2
0600039A60025: RNCC: 5 | RNVC: 9

31 Dec 1994

5120-14-370-2357
Cle Detau

143702357
MHC310-41: RNCC: 3 | RNVC: 2
MHC310-41: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-391-8659
Essai Support

143918659
MKG447-28: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-239-9254
Cle Pour Filtre

142399254
3210-95-32-185A: RNCC: 3 | RNVC: 2
3210-95-32-185: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-227-9274
Open End Wrench

142279274
31.16X17: RNCC: 3 | RNVC: 2
3148510970806: RNCC: 5 | RNVC: 2
91615808: RNCC: 5 | RNVC: 2
31-16X17: RNCC: 5 | RNVC: 2
0097080: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-262-9315
Socket Wrench Handle Bar

142629315
NO PRIMARY REF14-262-9315: RNCC: 3 | RNVC: 2
144K196: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-525-4903
Socket Wrench Extension

145254903
80-301125: RNCC: 3 | RNVC: 2

6 Jun 2001

5120-14-223-2537
Cle Pour Attelage D

142232537
D1054-5140: RNCC: 3 | RNVC: 2
D1054-5140: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-529-9661
Socket Wrench Socket

145299661
R463-T2: RNCC: 3 | RNVC: 2

24 Apr 2002

5120-14-428-5547
Manual Control Lever

144285547
MKG4592108: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-222-7393
Open End Wrench

142227393
20-7X6: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-511-1066
Sheet Metalworking Stake

145111066
2521006: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-268-7441
Piston Ring Compressor

142687441
M0NT18351: RNCC: 3 | RNVC: 2
M0N18351: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-255-1514

5120-14-283-2481

5120-14-261-7342

5120-14-340-8629
Spanner Wrench

143408629
OX087: RNCC: 3 | RNVC: 2
0X087: RNCC: 3 | RNVC: 9

14 Feb 1977

5120-14-284-6185
Open End Wrench

142846185
BB75: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-443-7970
Face Spanner Wrench Socket

144437970
OU21481: RNCC: 3 | RNVC: 2
0U21481: RNCC: 5 | RNVC: 2

5 Dec 1990

5120-14-575-2281
Socket Wrench Socket

145752281
82445216000: RNCC: 3 | RNVC: 1

20 Mar 2013

5120-14-513-3802
Flat Tip Screwdriver

145133802
AY.3,5X75VE: RNCC: 3 | RNVC: 2
SYQ5216: RNCC: 5 | RNVC: 2
3148510130453: RNCC: 5 | RNVC: 2
AY.3,5X75VSE: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-440-5431
Cle

144405431
51989: RNCC: 3 | RNVC: 2
85-694-1116: RNCC: 6 | RNVC: 9

17 Jul 1990

5120-14-422-6741
Cle Speciale

144226741
NO PRIMARY REF14-422-6741: RNCC: 3 | RNVC: 2
15189230H: RNCC: 5 | RNVC: 9

15 Mar 1988

5120-14-382-5510
Electrical Card Extractor

143825510
NO PRIMARY REF14-382-5510: RNCC: 3 | RNVC: 2
20030894: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-438-5045
Montage-Demon Guide

144385045
F47277: RNCC: 3 | RNVC: 2
85-693-9778: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-511-1056
Vise Jaw Caps

145111056
1223-M4: RNCC: 3 | RNVC: 2
225726: RNCC: 5 | RNVC: 2

2 Dec 1998

5120-14-441-2246
Bearing And Bushing Inserter And Remover

144412246
6802G32-2405-20: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-265-0888
Spanner Wrench

142650888
330A93-3312-00: RNCC: 3 | RNVC: 2
330A93-3312-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-237-4748
Bras Dimmobilisatio

142374748
3130S95-68-007-2: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-372-3061
Flat Tip Screwdriver

143723061
77-2-8-5534: RNCC: 3 | RNVC: 2
99016604: RNCC: 3 | RNVC: 2
77-2-8-5534: RNCC: 3 | RNVC: 9
99016604: RNCC: 5 | RNVC: 2
99016604: RNCC: 5 | RNVC: 9

1 Sep 1981

5120-14-569-2407
Mechanical Puller

145692407
T-650HUB: RNCC: 3 | RNVC: 2

26 Aug 2011

5120-14-319-4071
Torque Wrench Adapter

143194071
D-7/8: RNCC: 3 | RNVC: 2
3272670301290: RNCC: 5 | RNVC: 2
D7-8: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-530-8550
Socket Wrench Socket

145308550
55785: RNCC: 3 | RNVC: 2
3148510557854: RNCC: 5 | RNVC: 2
S.7/8LA: RNCC: 5 | RNVC: 2

9 Jul 2002

5120-14-253-5838

5120-14-430-3462
Controle Broche

144303462
RT17546: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-416-7526
Mandrin Presse

144167526
537294: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-558-8058
Six Point Tip Screwdriver

145588058
775501: RNCC: 3 | RNVC: 2
ANXP8X50: RNCC: 3 | RNVC: 2
3148517755017: RNCC: 5 | RNVC: 2

6 Nov 2008

5120-14-220-8390
Socket Wrench Crowfoot Attachment

142208390
17-9-59: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-348-0521
Extracteur Vis

143480521
C46947-2: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-575-6164
Spanner Wrench

145756164
8817909003: RNCC: 3 | RNVC: 2

18 Apr 2013

5120-14-361-2882
Pliers

143612882
A132539: RNCC: 3 | RNVC: 2
100531: RNCC: 5 | RNVC: 2

24 Jan 1980

5120-14-532-3268
Cross Tip Screwdriver

145323268
ADY.3X150VE: RNCC: 3 | RNVC: 2
3148510047386: RNCC: 5 | RNVC: 2
ADY.3X150VSE: RNCC: 5 | RNVC: 9

30 Oct 2002

5120-14-215-9626
Cle Etoilee Hexagon

142159626
773-411-003F4-46X5SURPLATS: RNCC: 3 | RNVC: 2
773-411-003F4-46X5SURPLATS: RNCC: 5 | RNVC: 9
773-411-003FF4-46X5SURPLATS: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-304-3775
Socket Head Screw Key

143043775
Y065-002-000: RNCC: 3 | RNVC: 2
80900-880: RNCC: 5 | RNVC: 2
Y065-002: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-393-8780

5120-14-274-1918
Pince A Cintrer A L

142741918
364FH1-4: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-511-0283
Flat Tip And Cross Tip Screwdriver Set

145110283
AS.18: RNCC: 3 | RNVC: 2
AA011850: RNCC: 6 | RNVC: 9

25 Nov 1998

5120-14-271-6085
Open End Wrench

142716085
E74-301-50: RNCC: 2 | RNVC: 2
69-50: RNCC: 3 | RNVC: 2
E74301C50WWF: RNCC: 5 | RNVC: 2
3272670257023: RNCC: 5 | RNVC: 2
CNM69SAM50: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-520-4886
Douille

145204886
2P80925-00: RNCC: 3 | RNVC: 2

17 May 2000

5120-14-463-9772
Face Spanner Wrench Socket

144639772
854-500-322-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-201-9934
Socket Wrench Socket

142019934
K.1'1/8A: RNCC: 3 | RNVC: 2
3148510297057: RNCC: 5 | RNVC: 2
K1 1-8: RNCC: 5 | RNVC: 9
0029705: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-276-3121
Socket Wrench Socket

142763121
S16: RNCC: 3 | RNVC: 2
S16: RNCC: 3 | RNVC: 2
S-16: RNCC: 3 | RNVC: 2
65L16-12PANS: RNCC: 3 | RNVC: 2
S16: RNCC: 3 | RNVC: 9
3148510535807: RNCC: 5 | RNVC: 2
3272670293557: RNCC: 5 | RNVC: 2
91493234: RNCC: 5 | RNVC: 2
DEMS16: RNCC: 5 | RNVC: 9
75S16: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-464-9033
Socket Wrench Socket

144649033
851-912-044-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-436-0254
Montage Emmchmt Rou

144360254
RT19888: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-440-3565
Conducte Extracteur

144403565
3511 271 80441: RNCC: 3 | RNVC: 2

11 Jul 1990

5120-14-292-8615

5120-14-292-8545

5120-14-558-9430
Six Point Tip Screwdriver

145589430
ANXP20X100: RNCC: 3 | RNVC: 2
775543: RNCC: 3 | RNVC: 2
3148517755437: RNCC: 5 | RNVC: 2

24 Nov 2008

5120-14-225-8898

5120-14-317-5005

5120-14-233-7716
Cle Pour Ecrou De R

142337716
849361A: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-490-6835
Case

144906835
240 C 00278 240: RNCC: 3 | RNVC: 2
F300 0T 000 0937: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-543-5246
Face Spanner Wrench Socket

145435246
8054776P00: RNCC: 3 | RNVC: 2

17 Nov 2004

5120-14-394-8915
Socket Wrench Spanner Attachment

143948915
440050: RNCC: 3 | RNVC: 2
440050: RNCC: 5 | RNVC: 9

2 Oct 1984

5120-14-503-4642
Electronic Component Inserter And Remover

145034642
29764562: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-454-1536
Screwdriver Bit

144541536
EP.152T: RNCC: 3 | RNVC: 2
3148510241524: RNCC: 5 | RNVC: 2
0024152: RNCC: 5 | RNVC: 9

24 Mar 1992

5120-14-232-6137
Socket Wrench Socket

142326137
PR26548: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-220-7920
Open End Wrench

142207920
RACC17: RNCC: 3 | RNVC: 2
RACC17: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-299-6426
Douille Sertissage

142996426
FF8X08A: RNCC: 3 | RNVC: 2
0T1602: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-291-8166
Socket Wrench Socket

142918166
NM46: RNCC: 3 | RNVC: 2
3148510392509: RNCC: 5 | RNVC: 2
0714 15 46: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-457-7192
Expansion Shield Setting Tool

144577192
356-2: RNCC: 3 | RNVC: 2
356.2: RNCC: 3 | RNVC: 2
3272670226784: RNCC: 5 | RNVC: 2

17 Sep 1992

5120-14-459-0571
Socket Wrench Screwdriver Attachment

144590571
RX.9: RNCC: 3 | RNVC: 2

18 Nov 1992

5120-14-375-3663
Craftsman's Tweezers

143753663
142-2: RNCC: 3 | RNVC: 2
3148511375839: RNCC: 5 | RNVC: 2
142.2: RNCC: 5 | RNVC: 2

26 Feb 1982

5120-14-383-4669
Electrical Card Extractor

143834669
20198011: RNCC: 3 | RNVC: 2
20198011: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-234-3648
Cle A Douille

142343648
0000170873: RNCC: 3 | RNVC: 2
0000170873: RNCC: 5 | RNVC: 9
170873: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-215-2404
Cle Speciale

142152404
PR46475: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-279-8664
Open End Wrench

142798664
123-6-010: RNCC: 3 | RNVC: 2
1236-010: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-235-3910

5120-14-388-5440
Verrouilla Appareil

143885440
NO PRIMARY REF14-388-5440: RNCC: 3 | RNVC: 2
805-2250560: RNCC: 5 | RNVC: 2
805-2250560: RNCC: 5 | RNVC: 9

3 Nov 1983

5120-14-447-7512
Hand Terminal Crimping Tool

144477512
0176780: RNCC: 3 | RNVC: 2
452: RNCC: 5 | RNVC: 2
91638923: RNCC: 5 | RNVC: 2
226-8488: RNCC: 5 | RNVC: 2
FACOM452: RNCC: 5 | RNVC: 9

3 Jun 1991

5120-14-517-9953
Six Point Tip Screwdriver

145179953
ENFD6577-50X175: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-400-5918
Torque Wrench Adapter

144005918
MHB107-21: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-401-4759
Came Cle Reglage

144014759
853-100-125-0: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-386-6857
Ens Guid Extraction

143866857
853-200-382-0: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-241-1458
Cle A Ergots Specia

142411458
0639-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-490-6867
Drill

144906867
240 D 01496 000: RNCC: 3 | RNVC: 2
F300 0T 000 0971: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-281-2947
Faux Mors Tige Coul

142812947
C46806: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-241-6052
Broche De Presertis

142416052
0T879: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-263-8202

5120-14-225-4027

5120-14-364-6210
Socket Head Screw Key

143646210
524147000: RNCC: 3 | RNVC: 2
213-98: RNCC: 5 | RNVC: 2

2 Sep 1980

5120-14-542-5420
Hand Armament Subsystem Carrier

145425420
728433S000-00A: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-476-1959
Electrical Contact Remover

144761959
809-732: RNCC: 3 | RNVC: 2
F300 0T 016 9623: RNCC: 5 | RNVC: 9

24 May 1995

5120-14-282-4472
Flat Tip Screwdriver

142824472
E74-351E4: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-385-3363
Mechanical Puller Attachment

143853363
365A93-3343-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-446-8327
Cross Tip Screwdriver

144468327
NO PRIMARY REF14-446-8327: RNCC: 3 | RNVC: 2
3148510040660: RNCC: 5 | RNVC: 2
ACP.1X250: RNCC: 5 | RNVC: 2
ACP1X250: RNCC: 5 | RNVC: 2
0613 350 130: RNCC: 5 | RNVC: 2
0004066: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-487-6644
Socket Wrench Socket

144876644
8969-71700: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-447-3407
Torque Wrench Adapter

144473407
12.11: RNCC: 3 | RNVC: 2
12-11: RNCC: 5 | RNVC: 2
3148510928708: RNCC: 5 | RNVC: 2
91714500: RNCC: 5 | RNVC: 2
0092870: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-303-6269
Socket Wrench Crowfoot Attachment

143036269
306368: RNCC: 3 | RNVC: 2
306368: RNCC: 5 | RNVC: 2
DIAMETRE20ASERIE200: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-513-4342
Socket Head Screw Key

145134342
NO PRIMARY REF14-513-4342: RNCC: 3 | RNVC: 2
NNP 5120860703217: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-232-1738

5120-14-041-4791

5120-14-559-5313
Fuse Puller

145595313
1756540: RNCC: 3 | RNVC: 2

21 Jan 2009

5120-14-395-7148

5120-14-352-3158

5120-14-260-3517
Extracteur De Filtr

142603517
PR47228: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-205-5075

5120-14-417-1280
Degorgeoir Collecte

144171280
547942: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-285-6288

5120-14-214-4680

5120-14-573-6014
Mechanical Puller Step Plate

145736014
T623G3006222: RNCC: 3 | RNVC: 2

24 Oct 2012

5120-14-313-5442
Extracteur De Clave

143135442
53MA401815: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-336-7588
Spanner Wrench

143367588
0242-2-52: RNCC: 3 | RNVC: 2

7 Oct 1976

5120-14-545-6558
Screwdriver Bit Set And Handle

145456558
AEM-M: RNCC: 3 | RNVC: 2
AEM.M: RNCC: 5 | RNVC: 2

26 Apr 2005

5120-14-316-6624

5120-14-296-8115

5120-14-282-9191
Socket Wrench Screwdriver Attachment

142829191
M2706: RNCC: 3 | RNVC: 9
DEMM2706: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-314-2323
Spanner Wrench

143142323
160-888053: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-341-5739
Socket Wrench Extension

143415739
RT20191A: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-424-2461
Hand Blind Riveter

144242461
Z305: RNCC: 3 | RNVC: 2
ZS305: RNCC: 5 | RNVC: 2
91619146: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-253-9741
Douille A Ergots Eq

142539741
PR46825: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-506-7670
De Montage Outil

145067670
M13720: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-416-7463
Speciale Cle

144167463
536849: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-240-4189

5120-14-238-2988

5120-14-250-1739

5120-14-283-1303
Demi-Collier

142831303
T0120BBF4APL4: RNCC: 3 | RNVC: 2
301718T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-378-6657
Open End Wrench

143786657
BB107: RNCC: 3 | RNVC: 9

11 Aug 1982

5120-14-554-7921
Drive Pin Punch Set

145547921
7259000010: RNCC: 3 | RNVC: 2
189739378: RNCC: 5 | RNVC: 2

24 Aug 2007

5120-14-378-2690
Hand Sleeve Bearing Burnisher

143782690
50701: RNCC: 3 | RNVC: 2
507/1: RNCC: 5 | RNVC: 2

20 Jul 1982

5120-14-398-2456
Serrage Outillage

143982456
46AM003: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-237-4707
Mechanical Puller Attachment

142374707
3130S95-68-008: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-406-5609
Socket Wrench Crowfoot Attachment

144065609
853-200-631-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-231-8229
Cle Speciale Pour E

142318229
9970-115-258: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-273-8182

5120-14-315-2743
Spanner Wrench

143152743
3511-961-53721: RNCC: 3 | RNVC: 2
3511 961 53721: RNCC: 5 | RNVC: 2
MQ15372: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-549-3694
Combination Box And Open End Wrench Set

145493694
MOD.67J12: RNCC: 3 | RNVC: 2

27 Mar 2006

5120-14-395-0705
Spanner Wrench

143950705
H46684: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-541-6785
Socket Wrench Screwdriver Attachment

145416785
457-14538-000: RNCC: 3 | RNVC: 2

17 Jun 2004

5120-14-203-3783
Drift

142033783
3130S95-12-053: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-438-9643
Bearing And Bushing Inserter And Remover

144389643
330A98-2180-00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-371-4242
Spanner Wrench

143714242
6254-57012: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-479-0452
Spanner Wrench

144790452
D05-0231: RNCC: 3 | RNVC: 2

11 Dec 1995

5120-14-237-9818
Wire Twister Pliers

142379818
NO PRIMARY REF14-237-9818: RNCC: 3 | RNVC: 2
RT20915: RNCC: 5 | RNVC: 9
R0BINS0N12: RNCC: 5 | RNVC: 9
R0BINS0N12P0UCES: RNCC: 5 | RNVC: 9
85-681-3741: RNCC: 6 | RNVC: 9

1 Jan 1967

5120-14-370-6291
Outillage De Collag

143706291
6215E11-1220-00: RNCC: 3 | RNVC: 2
62-15-330-11-1220-00: RNCC: 5 | RNVC: 2
62-15-330A11-1220-00: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-499-9944
Cle Cartouch

144999944
46 429 279: RNCC: 3 | RNVC: 2
46-429-279: RNCC: 3 | RNVC: 2
F300 0T 023 9903: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-231-8231
Cle Speciale Pour E

142318231
9970-115-261: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-577-6203
Drift

145776203
853-203-307-0: RNCC: 3 | RNVC: 2
061435: RNCC: 5 | RNVC: 9

27 Sep 2013

5120-14-469-0411
Socket Head Screw Key Set

144690411
66-TR-8: RNCC: 3 | RNVC: 2
66TR8: RNCC: 3 | RNVC: 2
3272670279186: RNCC: 5 | RNVC: 2

5 Apr 1994

5120-14-481-6892
Spanner Wrench

144816892
3TPANK08919A: RNCC: 3 | RNVC: 2
TPANK08919A: RNCC: 5 | RNVC: 2

23 May 1996

5120-14-486-1301
Socket Head Screw Key Set

144861301
83SH.JU8: RNCC: 3 | RNVC: 2
3148515328763: RNCC: 5 | RNVC: 2
83SHJU8: RNCC: 5 | RNVC: 2
0532876: RNCC: 5 | RNVC: 2

5 Mar 1997

5120-14-554-8113
Screwdriver Bit

145548113
EH.206L: RNCC: 3 | RNVC: 2

28 Aug 2007

5120-14-574-3907
Pipe Wrench

145743907
012545: RNCC: 3 | RNVC: 2

15 Jan 2013

5120-14-258-2429
Cle Speciale

142582429
M0N1020: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-374-6783

5120-14-321-5576

5120-14-302-3278

5120-14-564-9198
Bearing And Bushing Remover

145649198
885172: RNCC: 3 | RNVC: 2

17 Jun 2010

5120-14-397-6728

5120-14-415-4420
Socket Wrench Socket

144154420
M4Z6021910422: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-293-9194
Inserted Hammer Face

142939194
206-40B: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-251-1132
Cle A Ergot

142511132
202417: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-412-1599
Cle A Ergots Ergot

144121599
188440: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-239-8977

5120-14-240-4197

5120-14-304-0374

5120-14-256-6010
Spanner Wrench

142566010
4207-1: RNCC: 3 | RNVC: 9

1 Jan 1969

5120-14-535-2244
Turnlock Fastener Inserter And Remover

145352244
1-110: RNCC: 3 | RNVC: 2
1-110: RNCC: 5 | RNVC: 2

14 May 2003

5120-14-488-5539
Socket Head Screw Key

144885539
83H.1/8: RNCC: 3 | RNVC: 2
3059001020: RNCC: 5 | RNVC: 2
24461: RNCC: 5 | RNVC: 2
3148511244616: RNCC: 5 | RNVC: 2
83H1-8: RNCC: 5 | RNVC: 2

21 May 1997

5120-14-446-6638
Socket Head Screw Key

144466638
IT248DCMAAEMBOUT: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-287-4935
Electronic Crystal Unit Extractor

142874935
B16136886: RNCC: 3 | RNVC: 2
16136886: RNCC: 3 | RNVC: 2
B16136886: RNCC: 3 | RNVC: 9
16136886: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-220-7906
Open End Wrench

142207906
RACD20: RNCC: 3 | RNVC: 2
RACD20: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-378-6658
Open End Wrench

143786658
BB110: RNCC: 3 | RNVC: 9

11 Aug 1982

5120-14-420-1002
Bearing And Bushing Inserter

144201002
8813857000: RNCC: 3 | RNVC: 2

18 Nov 1987

5120-14-276-1943
Outillage Demontage

142761943
C8343REP1A5: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-216-5160
Socket Head Screw Key

142165160
62-1/16: RNCC: 3 | RNVC: 2
0123420: RNCC: 3 | RNVC: 2
62 1-16: RNCC: 3 | RNVC: 2
82 1-16: RNCC: 5 | RNVC: 2
82-1-16: RNCC: 5 | RNVC: 2
82.1/16: RNCC: 5 | RNVC: 2
16400472-6: RNCC: 5 | RNVC: 2
3272670212848: RNCC: 5 | RNVC: 2
60 1-16: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-425-6897
Detent Handling Tool

144256897
8813505002: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-451-1126
Open End Wrench

144511126
76142: RNCC: 3 | RNVC: 2
89280665: RNCC: 5 | RNVC: 2

30 Oct 1991

5120-14-426-8304
Socket Head Screw Key

144268304
0419-40065: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-466-3708
Open End Wrench

144663708
61AM006: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-242-8416
Open End Wrench

142428416
36290: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-394-9020
Socket Wrench Screwdriver Attachment

143949020
75SM19: RNCC: 3 | RNVC: 2
SM19: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-419-2663
Mandrin Rectificati

144192663
536666: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-409-3085
Arrache Ergot

144093085
DLP750100: RNCC: 3 | RNVC: 2

27 May 1986

5120-14-329-9302
Socket Wrench Socket

143299302
NM.65: RNCC: 3 | RNVC: 2
3148510394404: RNCC: 5 | RNVC: 2
NM65: RNCC: 5 | RNVC: 2
0714 15 65: RNCC: 5 | RNVC: 2
0039440: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-565-6529
Spanner Wrench

145656529
46AM148: RNCC: 3 | RNVC: 2

13 Sep 2010

5120-14-412-0413
Porte-Outil

144120413
DLP753904: RNCC: 3 | RNVC: 2

26 Sep 1986

5120-14-533-6386
Spring Inserter And Remover

145336386
70238335: RNCC: 3 | RNVC: 2

12 Feb 2003

5120-14-373-4930
Mandrin Special

143734930
215115: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-221-9699

5120-14-293-7568

5120-14-226-3732

5120-14-534-0872
Bearing And Bushing Inserter And Remover

145340872
713091: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-442-2389
Cle A Oeil

144422389
C46042: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-428-5292
Levier Support

144285292
MJN3462412: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-299-6409
Douille Sertissage

142996409
FF12X1E: RNCC: 3 | RNVC: 2
0T1650: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-270-6332
Bague De Rodage

142706332
S16-0102-0800: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-371-2279
Electrical Card Extractor

143712279
3511 260 70761: RNCC: 3 | RNVC: 2
3511-260-70761: RNCC: 5 | RNVC: 2

5 Aug 1981

5120-14-394-0590
Outil Posit Levier

143940590
NO PRIMARY REF14-394-0590: RNCC: 3 | RNVC: 2
L121AAV308M: RNCC: 5 | RNVC: 9
85-692-6221: RNCC: 6 | RNVC: 9

23 Jun 1984

5120-14-222-1433
Flat Tip Screwdriver

142221433
E74-351-1X6-5X150R0NDEIS0LEE: RNCC: 2 | RNVC: 2
253MG-13: RNCC: 3 | RNVC: 2
253MG13: RNCC: 3 | RNVC: 2
3272670264113: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-286-0139
Hose Strap Band Clamping Tool

142860139
1098I: RNCC: 3 | RNVC: 2
TEN1098: RNCC: 3 | RNVC: 2
1098: RNCC: 5 | RNVC: 2
TEN10-1098: RNCC: 5 | RNVC: 9
0085551: RNCC: 5 | RNVC: 9
SER0085551: RNCC: 5 | RNVC: 9
85-692-6308: RNCC: 6 | RNVC: 9
F300 0T 014 9639: RNCC: 6 | RNVC: 9

1 Jan 1972

5120-14-291-1904
Open End Wrench

142911904
E74302P5X5-5AKB: RNCC: 2 | RNVC: 2

1 Jan 1972

5120-14-319-4541
Couronne Maint Ecro

143194541
3130S98-02-006: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-248-5233
Cle Montage Turbine

142485233
NO PRIMARY REF14-248-5233: RNCC: 3 | RNVC: 2
341067: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-491-3879
Cle

144913879
NO PRIMARY REF14-491-3879: RNCC: 3 | RNVC: 2
13618: RNCC: 5 | RNVC: 9
F300 0T 002 6749: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-496-8218
Cle

144968218
B03-4206: RNCC: 3 | RNVC: 2
F300 0T 022 1593: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-317-7959
Essa Etan Outillage

143177959
NO PRIMARY REF14-317-7959: RNCC: 3 | RNVC: 2
808138-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-420-4459
Spanner Wrench

144204459
E74323A110NU: RNCC: 2 | RNVC: 2

10 Dec 1987

5120-14-420-9881
Spanner Wrench

144209881
20856423: RNCC: 3 | RNVC: 2
20856423: RNCC: 3 | RNVC: 9

6 Jan 1988

5120-14-511-1063
Sheet Metalworking Stake

145111063
2540506: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-429-1763
Spanner Wrench

144291763
P410838: RNCC: 3 | RNVC: 2
410838: RNCC: 5 | RNVC: 2

11 Jan 1989

5120-14-468-9848
Bearing And Bushing Inserter And Remover

144689848
40N128474: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-368-1451
Screw Thread Insert Inserter

143681451
01500478600: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-457-9888
Seal Inserter And Remover

144579888
540425: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-321-1586
Screw Thread Insert Inserter

143211586
32070520: RNCC: 3 | RNVC: 2
32240520: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-513-3794
Pliers

145133794
431.MT: RNCC: 3 | RNVC: 2

17 Mar 1999

5120-14-437-8628
Spanner Wrench

144378628
16849471: RNCC: 3 | RNVC: 2
16849471: RNCC: 5 | RNVC: 9

21 Feb 1990

5120-14-363-4674
Socket Head Screw Key

143634674
ECEMAT7676: RNCC: 3 | RNVC: 2

9 May 1980

5120-14-535-9751
Face Spanner Wrench Socket

145359751
132297: RNCC: 3 | RNVC: 2

2 Jul 2003

5120-14-459-1610
Seal Inserter And Remover

144591610
45056136: RNCC: 3 | RNVC: 2
45056136: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-282-9192
Socket Wrench Screwdriver Attachment

142829192
M2707: RNCC: 3 | RNVC: 9
DEMM2707: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-578-4733
Inserter And Remove

145784733
8814661001: RNCC: 3 | RNVC: 2

3 Dec 2013

5120-14-414-9697
Screw Thread Insert Inserter

144149697
23530108000: RNCC: 3 | RNVC: 2
S8: RNCC: 5 | RNVC: 2
S8: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-389-9773
Socket Head Screw Key

143899773
065U20-623273W: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-380-8404
Spanner Wrench

143808404
PR47672: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-539-0932
Solid Center Punch

145390932
NGM0099084543365: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-314-8951
Spanner Wrench

143148951
15988: RNCC: 3 | RNVC: 2
15988: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-514-0456
Socket Head Screw Key

145140456
LDB301200: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-313-4723
Open End Wrench

143134723
488563: RNCC: 3 | RNVC: 2
20488563-8: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-424-3488
Socket Wrench Socket

144243488
K.50A: RNCC: 3 | RNVC: 2
3148510294858: RNCC: 5 | RNVC: 2
K50A: RNCC: 5 | RNVC: 2
0029485: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-516-9034
Screwdriver Bit Set And Handle

145169034
AMZ.5: RNCC: 3 | RNVC: 2
AMZ5: RNCC: 5 | RNVC: 2

20 Oct 1999

5120-14-274-7766
Flat Tip Screwdriver

142747766
253-5: RNCC: 3 | RNVC: 2

1 Jan 1971

Load More Results