What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 74 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 74 of 110

5120-14-470-7875
Bearing And Bushing Inserter And Remover

144707875
75932: RNCC: 3 | RNVC: 2
89280659: RNCC: 5 | RNVC: 2
89280477: RNCC: 5 | RNVC: 2

6 Jul 1994

5120-14-202-8248

5120-14-219-1839

5120-14-218-6721

5120-14-436-0193
Cle Maintien Pignon

144360193
RT30561: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-499-0049
Tuyau

144990049
050450106: RNCC: 3 | RNVC: 2
050040106: RNCC: 5 | RNVC: 9
F300 0T 015 2825: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-415-9897

5120-14-412-4748

5120-14-557-0604
Ratchet Driven Jack

145570604
19230128: RNCC: 3 | RNVC: 2

5 May 2008

5120-14-493-9119
Cle

144939119
708055: RNCC: 3 | RNVC: 2
F300 0T 014 5389: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-318-6440
Spanner Wrench

143186440
C46830: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-543-5592
Open End Wrench

145435592
8056257N00: RNCC: 3 | RNVC: 2

23 Nov 2004

5120-14-430-9339
Socket Head Screw Key

144309339
160H722334: RNCC: 3 | RNVC: 2

29 Mar 1989

5120-14-416-1964
Fixed Open End Wrench Set

144161964
74024: RNCC: 3 | RNVC: 2
44: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-461-3313
Bague Montage

144613313
31079: RNCC: 3 | RNVC: 2

8 Mar 1993

5120-14-426-8296
Socket Head Screw Key

144268296
0419-40049: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-239-9048

5120-14-416-7639
Metallique Jet

144167639
540395: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-370-4529
Saddler's Sewing Awl

143704529
NO PRIMARY REF14-370-4529: RNCC: 3 | RNVC: 2
C40-6B280: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-514-8401
Cross Tip Screwdriver

145148401
ENFD6569-0X100: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-356-5960
Spanner Wrench

143565960
TF10A32416: RNCC: 3 | RNVC: 2
85-688-6563: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-350-0264
Raccord Tube Rallon

143500264
3130S95-68-067: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-478-2566
Outillage

144782566
0625Z102-100-0001: RNCC: 3 | RNVC: 2

18 Oct 1995

5120-14-578-1263
Spanner Wrench

145781263
8819570000: RNCC: 3 | RNVC: 2

4 Nov 2013

5120-14-401-5642
Plateau Tournan Cle

144015642
350A93-3316-20: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-562-2114
Mechanical Puller Attachment

145622114
8811311100: RNCC: 3 | RNVC: 2

7 Oct 2009

5120-14-381-5385
Chasse Joints Elast

143815385
099056U: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-229-3314

5120-14-512-0295
Cle

145120295
SP1121A: RNCC: 3 | RNVC: 2
5000261739: RNCC: 5 | RNVC: 2

3 Feb 1999

5120-14-285-4795

5120-14-342-8114

5120-14-247-4464
Tirevessie Pour Acc

142474464
200226-03600: RNCC: 3 | RNVC: 2
200226-00000: RNCC: 5 | RNVC: 2
2258: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-258-5492
Tournevis Pour Cond

142585492
NO PRIMARY REF14-258-5492: RNCC: 3 | RNVC: 2
22991: RNCC: 5 | RNVC: 9
22991: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-437-2451
Outil Reparat Vanne

144372451
NO PRIMARY REF14-437-2451: RNCC: 3 | RNVC: 2
638870: RNCC: 5 | RNVC: 9

24 Jan 1990

5120-14-341-0215
Pliers

143410215
35-16C: RNCC: 3 | RNVC: 2
35-16CM: RNCC: 5 | RNVC: 2

16 Mar 1977

5120-14-578-4738
Inserter And Remove

145784738
8814661003: RNCC: 3 | RNVC: 2

3 Dec 2013

5120-14-568-6865
Torque Wrench Adapter

145686865
M412100A2908A: RNCC: 1 | RNVC: 2
SP6015: RNCC: 3 | RNVC: 2

28 Jun 2011

5120-14-311-8212
Spanner Wrench

143118212
C47160: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-487-6096
Hand Armament Subsystem Carrier

144876096
R44277: RNCC: 3 | RNVC: 2

14 Apr 1997

5120-14-239-4441
Cle Dajustement Spe

5120-14-418-0937
Relais Dep Bielle

144180937
006603041P: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-560-1956
Retaining Ring Installation Tool

145601956
10711511: RNCC: 3 | RNVC: 2

1 Apr 2009

5120-14-370-6397

5120-14-219-4107
Broche De Montage

142194107
17-9-32: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-236-4570

5120-14-246-5533

5120-14-267-5396
Cle A Tube

142675396
3525465: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-576-2830
Mechanical Puller S

145762830
8810480005: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-576-3075
Mechanical Puller S

145763075
8811665003: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-240-3366
Attache Quart Pince

142403366
0-100: RNCC: 3 | RNVC: 2
0-100: RNCC: 5 | RNVC: 9
M100: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-411-9143
App.Montage Roue

144119143
14189760C: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-574-5901
Fuse Puller

145745901
2699: RNCC: 3 | RNVC: 2

4 Feb 2013

5120-14-225-9660
Pince Speciale Pour

142259660
24545801500: RNCC: 3 | RNVC: 2
144HL61: RNCC: 5 | RNVC: 9
145J15: RNCC: 5 | RNVC: 9
245458015: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-411-5126
Open End Wrench

144115126
201538-00000: RNCC: 3 | RNVC: 2

6 Aug 1986

5120-14-514-0076
Open End Wrench

145140076
ENFD29159-9X11: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-384-7365
Electrical Card Extractor

143847365
NO PRIMARY REF14-384-7365: RNCC: 3 | RNVC: 2
16931904: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-356-1002
Socket Wrench Socket

143561002
9970-115-704: RNCC: 3 | RNVC: 2
85-689-8259: RNCC: 6 | RNVC: 9

5 Apr 1979

5120-14-393-4125
Socket Head Screw Key

143934125
81-14: RNCC: 3 | RNVC: 2
64-M14: RNCC: 3 | RNVC: 2
64.M14: RNCC: 3 | RNVC: 2
3272670279919: RNCC: 5 | RNVC: 2
3148511226001: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-520-9617
Retaining Ring Installation Tool

145209617
540103: RNCC: 3 | RNVC: 2
A540103-003: RNCC: 5 | RNVC: 2

26 Jun 2000

5120-14-256-8882
Spanner Wrench

142568882
761-3M957P2: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-040-2911
Tige Dextraction

140402911
RT5407: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-493-9825
Cle

144939825
3300180: RNCC: 3 | RNVC: 2
F300 0T 014 9040: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-313-8788

5120-14-256-7180

5120-14-558-0420
Flat Tip Screwdriver

145580420
ANF5,5X100: RNCC: 3 | RNVC: 2
91883646: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-386-7842
Butee De Sertissage

143867842
K269: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-372-2855
Element Pince

143722855
302992: RNCC: 3 | RNVC: 2

1 Sep 1981

5120-14-319-3017

5120-14-236-4565

5120-14-332-0789
Socket Wrench Adapter

143320789
160-71960-39: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-448-9265
Hand Terminal Crimping Tool

144489265
M1001: RNCC: 3 | RNVC: 2

24 Jul 1991

5120-14-233-6092

5120-14-483-2286
Sertissage Embout

144832286
26-519-02: RNCC: 3 | RNVC: 2

28 Aug 1996

5120-14-361-5430
Socket Wrench Socket

143615430
14189700M: RNCC: 3 | RNVC: 2
14-18-970: RNCC: 5 | RNVC: 2

24 Jan 1980

5120-14-550-9939
Blind Riveter Mandrel

145509939
6501FE159-300: RNCC: 3 | RNVC: 2

17 Aug 2006

5120-14-309-7434
Face Spanner Wrench Socket

143097434
341A93-3509-20: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-451-3519
Spanner Wrench

144513519
MAT137-0019: RNCC: 2 | RNVC: 2

14 Nov 1991

5120-14-290-1806
Pliers

142901806
188-16EL: RNCC: 3 | RNVC: 2
188-16E: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-308-0984
Cross Tip Screwdriver

143080984
M6-090: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-483-0613
Spanner Wrench

144830613
10445331: RNCC: 3 | RNVC: 2

8 Aug 1996

5120-14-317-0446
Spanner Wrench

143170446
RT5392: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-550-6261
Six Point Tip Screwdriver

145506261
6940424: RNCC: 3 | RNVC: 2

3 Jul 2006

5120-14-543-5490
Detent Handling Tool

145435490
702914: RNCC: 3 | RNVC: 2
MONT 702914: RNCC: 5 | RNVC: 2

19 Nov 2004

5120-14-525-2656
Hand Terminal Crimping Tool

145252656
10615259: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-521-6355
Torque Wrench Adapter

145216355
SP3753: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-543-2625
Six Point Tip Screwdriver

145432625
AEX.15X75: RNCC: 3 | RNVC: 2

13 Oct 2004

5120-14-538-4329
Spanner Wrench

145384329
NGM0010037124696: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-544-9278
Cross Tip Screwdriver

145449278
624420: RNCC: 3 | RNVC: 2

4 Mar 2005

5120-14-325-6113
Socket Head Screw Key

143256113
468702: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-388-6221
Electrical Card Extractor

143886221
1265074: RNCC: 3 | RNVC: 2
1265074: RNCC: 5 | RNVC: 2

3 Nov 1983

5120-14-257-1786

5120-14-339-0127

5120-14-490-2019
Cambreur

144902019
CP0U6099: RNCC: 3 | RNVC: 9
5120AA2009678: RNCC: 6 | RNVC: 9

17 Sep 1997

5120-14-225-5713

5120-14-280-1405

5120-14-490-8793
Tournev

144908793
4065 200 000 698: RNCC: 3 | RNVC: 2
F300 0T 000 5063: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-329-9469

5120-14-558-2256
Electronic Equipment Alignment Tool

145582256
726825: RNCC: 3 | RNVC: 2

15 Sep 2008

5120-14-567-0545
Combination Box And Open End Wrench Set

145670545
440.JE25: RNCC: 3 | RNVC: 2
3148518006576: RNCC: 5 | RNVC: 2
800657: RNCC: 5 | RNVC: 2

2 Feb 2011

5120-14-223-5093

5120-14-475-9378
Adaptateur Cannele

144759378
MAT171-0435F14: RNCC: 3 | RNVC: 2

11 May 1995

5120-14-201-5528
Poincon A Chev Lame

142015528
NO PRIMARY REF14-201-5528: RNCC: 3 | RNVC: 2
109-10: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-281-1949
Socket Wrench Socket

142811949
65LT14: RNCC: 3 | RNVC: 2
S14L: RNCC: 3 | RNVC: 2
SL-14: RNCC: 3 | RNVC: 2
SL14: RNCC: 3 | RNVC: 2
3272670296961: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-370-2300
Outil Emmanch Rotor

143702300
8810152000: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-368-4604

5120-14-365-1634

5120-14-255-2615
Spanner Wrench

142552615
D1557-60004: RNCC: 3 | RNVC: 2
D1557-60004: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-514-7322
Cross Tip Screwdriver

145147322
ENFD6568-1X80: RNCC: 3 | RNVC: 2

11 Jun 1999

5120-14-364-2690
Face Spanner Wrench Socket

143642690
238500-78: RNCC: 3 | RNVC: 2
TF10A29402: RNCC: 5 | RNVC: 2
85-688-4592: RNCC: 6 | RNVC: 9

7 Aug 1980

5120-14-228-5174
Open End Wrench

142285174
NO PRIMARY REF14-228-5174: RNCC: 3 | RNVC: 2
285-33A: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-213-4271
Carre Amovible Spec

142134271
S155: RNCC: 3 | RNVC: 2
9970-115-238-90: RNCC: 5 | RNVC: 2
9970-115-238: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-238-5787

5120-14-569-0348
Mechanical Puller

145690348
F27381000: RNCC: 3 | RNVC: 2

1 Aug 2011

5120-14-386-9721
Socket Wrench Socket

143869721
NS.17L: RNCC: 3 | RNVC: 2
T720L17: RNCC: 3 | RNVC: 2
0714 13 14: RNCC: 5 | RNVC: 2
3148510428901: RNCC: 5 | RNVC: 2
NS17L: RNCC: 5 | RNVC: 2
NS.17LA: RNCC: 5 | RNVC: 2
0042890: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-405-2258
Electrical Card Extractor

144052258
1900260000: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-390-0195
Wire Twister Pliers

143900195
9070702020: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-289-7375
Hand Terminal Crimping Tool

142897375
R282240: RNCC: 3 | RNVC: 2
612648: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-375-8014
Spanner Wrench

143758014
300A99197: RNCC: 3 | RNVC: 2
91369777: RNCC: 5 | RNVC: 2
300A99197: RNCC: 5 | RNVC: 2
300A99197: RNCC: 5 | RNVC: 9
300A99197: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-272-3589
Spanner Wrench

142723589
E74323A17AGW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-420-6569
Socket Wrench Spanner Attachment

144206569
248547: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-353-2506
Hydraulic Jack Parts Kit

143532506
M53364: RNCC: 3 | RNVC: 2
M5336H: RNCC: 5 | RNVC: 2

8 Dec 1978

5120-14-224-8607
Socket Wrench Handle Bar

142248607
20X500A56: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-236-8771
Spanner Wrench

142368771
0772-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-459-1621
Bearing And Bushing Remover

144591621
45056172: RNCC: 3 | RNVC: 2
45056172: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-284-9924
Magnetic Retrieving Tool

142849924
828: RNCC: 3 | RNVC: 2
3148512063100: RNCC: 5 | RNVC: 2
91711986: RNCC: 5 | RNVC: 2
0206310: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-399-3431
De Montage Obus

143993431
46AM043: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-314-8603

5120-14-568-5656
Spring Inserter And Remover

145685656
S47327: RNCC: 3 | RNVC: 2
S47327: RNCC: 5 | RNVC: 2

21 Jun 2011

5120-14-223-5313

5120-14-274-7902

5120-14-394-5393
Outil Pose Ressort

143945393
3CGF168: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-301-5519

5120-14-303-9264

5120-14-272-3597

5120-14-373-6770
Decolle Durit Outil

143736770
225776: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-330-7519
Open End Wrench

143307519
CNM69-35: RNCC: 3 | RNVC: 2
85-681-3360: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-510-0331
Open End Wrench

145100331
22-260-15: RNCC: 3 | RNVC: 2
5120AA2026062: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-390-3242
Deverrouillage Cle

143903242
35AM005A: RNCC: 3 | RNVC: 2
85-692-4888: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-540-1722
Socket Head Screw Key

145401722
88E.3/32X75: RNCC: 3 | RNVC: 2
3148511266847: RNCC: 5 | RNVC: 2

11 Mar 2004

5120-14-371-7726
Socket Head Screw Key Set

143717726
7196: RNCC: 3 | RNVC: 2
85-691-5581: RNCC: 6 | RNVC: 9

5 Aug 1981

5120-14-032-3511

5120-14-444-4555
Reparation Lot

144444555
231437: RNCC: 3 | RNVC: 2
85-694-3380: RNCC: 6 | RNVC: 9

9 Jan 1991

5120-14-396-4119
Pince De Retouche

143964119
6274-51007: RNCC: 3 | RNVC: 2
6274-2132120: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-574-5326
Drive Pin Punch

145745326
ARM01-54: RNCC: 3 | RNVC: 2

28 Jan 2013

5120-14-372-0429

5120-14-421-5995
Socket Wrench Socket

144215995
39064892: RNCC: 3 | RNVC: 2

20 Jan 1988

5120-14-040-0670
Mandrin De Blocage

140400670
26-252: RNCC: 3 | RNVC: 2
BL43947: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-208-5597

5120-14-566-2553
Detent Handling Tool

145662553
99346252: RNCC: 3 | RNVC: 2

2 Nov 2010

5120-14-228-5211

5120-14-442-2472
Socket Head Screw Key

144422472
10-690223A: RNCC: 3 | RNVC: 2
10-690223A: RNCC: 5 | RNVC: 9
85-694-1455: RNCC: 6 | RNVC: 9

3 Oct 1990

5120-14-251-1344
Extracteur

142511344
1813T: RNCC: 3 | RNVC: 2
MR3408-210: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-371-0607
Terminal Crimping Tool Contact Positioner

143710607
476896: RNCC: 3 | RNVC: 2
85-691-7232: RNCC: 6 | RNVC: 9

5 Jun 1981

5120-14-307-0946
Spanner Wrench

143070946
M262-10-26: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-557-9114
Socket Wrench Adapter

145579114
9402CMP133016: RNCC: 3 | RNVC: 2

29 Jul 2008

5120-14-370-6139
Verin Carter

143706139
5205-014: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-435-7357
Sertisseur Roulemen

144357357
15507: RNCC: 3 | RNVC: 2
85-693-3810: RNCC: 6 | RNVC: 9

22 Nov 1989

5120-14-214-4941

5120-14-317-0320

5120-14-488-3154
Cross Tip Screwdriver

144883154
ATHH.P3: RNCC: 3 | RNVC: 2
0011735: RNCC: 5 | RNVC: 2
3148510117355: RNCC: 5 | RNVC: 2
ATHHP3: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-468-7914
Bung Wrench

144687914
0907M43: RNCC: 3 | RNVC: 2

22 Mar 1994

5120-14-486-5618
Embout Special

144865618
RT13661: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-442-5696
Socket Wrench Socket

144425696
GS66-12: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-14-450-3771
Bearing Staking Installation Tool

144503771
NO PRIMARY REF14-450-3771: RNCC: 3 | RNVC: 2
BL53968: RNCC: 5 | RNVC: 9

1 Oct 1991

5120-14-256-3612
Pliers

142563612
10-038: RNCC: 3 | RNVC: 2
0UTF5: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-357-3405
Spanner Wrench

143573405
E74-323-12A15: RNCC: 2 | RNVC: 2

7 Jun 1979

5120-14-323-8241
Slip Joint Pliers

143238241
8498-02: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-534-2252

5120-14-249-9399

5120-14-261-4508
Chasse A Parer Plat

142614508
NO PRIMARY REF14-261-4508: RNCC: 3 | RNVC: 2
74791-50: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-367-6849
Pliers

143676849
N133-16CM: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-330-9521
Mechanical Puller Attachment

143309521
D1553-4949: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-517-1769
Open End Wrench

145171769
G040Z100-003B0001: RNCC: 3 | RNVC: 2

15 Nov 1999

5120-14-385-3330
Mechanical Puller Attachment

143853330
365A93-3101-22: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-226-7425
Open End Wrench

142267425
30-5X5: RNCC: 3 | RNVC: 2
85-638-9040: RNCC: 6 | RNVC: 9

1 Jan 1966

5120-14-426-6239
Appareil De Levage

144266239
NO PRIMARY REF14-426-6239: RNCC: 3 | RNVC: 2
771168: RNCC: 5 | RNVC: 9
N485681: RNCC: 5 | RNVC: 9

10 Sep 1988

5120-14-407-6319
Pliers

144076319
EQ72-18REP46: RNCC: 3 | RNVC: 2

27 Feb 1986

5120-14-374-0857
Spanner Wrench

143740857
UHG303-24: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-577-6330
Spanner Wrench

145776330
2P84542-01: RNCC: 3 | RNVC: 2

1 Oct 2013

5120-14-274-8492
Blacksmith's Vise

142748492
4331-165TYPE47: RNCC: 3 | RNVC: 2
RAR1934: RNCC: 5 | RNVC: 2
47-36: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-242-0945

5120-14-398-1450
Montage Cone

143981450
F46739: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-354-8660
Open End Wrench

143548660
187551: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-281-1776
Socket Wrench Socket

142811776
46861: RNCC: 3 | RNVC: 2
205789: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-210-8471

5120-14-302-8092

5120-14-428-5229
Fixation Entretoise

144285229
MFG4392102: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-302-8134

5120-14-516-8038
Poussoir

145168038
5001008696: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-432-1122
Screwdriver Bit

144321122
0025013: RNCC: 3 | RNVC: 2
ET102-5: RNCC: 5 | RNVC: 2
ET102.5: RNCC: 5 | RNVC: 2
25013: RNCC: 5 | RNVC: 9

24 May 1989

5120-14-329-1033
Valve Spring Lifter

143291033
U.13L: RNCC: 3 | RNVC: 2
3148510662008: RNCC: 5 | RNVC: 2
101217: RNCC: 5 | RNVC: 2
U13L: RNCC: 5 | RNVC: 2
U13DA: RNCC: 5 | RNVC: 9
0066110: RNCC: 5 | RNVC: 9
U.13DA: RNCC: 5 | RNVC: 9
0066200: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-227-8927
Open End Wrench

142278927
35-5: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-460-4318
Open End Wrench

144604318
10-5,5X7: RNCC: 3 | RNVC: 2

25 Jan 1993

5120-14-490-6438
Socket Wrench Ratchet Attachment

144906438
K.382: RNCC: 3 | RNVC: 2
91778012: RNCC: 5 | RNVC: 2
3148510312002: RNCC: 5 | RNVC: 2
0031200: RNCC: 5 | RNVC: 9

8 Oct 1997

5120-14-425-9278
Special Mandrin

144259278
600178: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-306-2933
Spanner Wrench

143062933
45944: RNCC: 3 | RNVC: 2
45944: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-249-9479

5120-14-373-6778
Depose Carter Cle

143736778
225780: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-421-1934
Pliers

144211934
93040055: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-506-9692
Spanner Wrench

145069692
126A.35: RNCC: 3 | RNVC: 2
126A35: RNCC: 5 | RNVC: 2
3148511346914: RNCC: 5 | RNVC: 2

27 May 1998

5120-14-477-1856
Seal Inserter And Remover

144771856
F109963A: RNCC: 3 | RNVC: 2
70040738: RNCC: 5 | RNVC: 2
GD410411800VARIANTE00: RNCC: 5 | RNVC: 2
RAR1941: RNCC: 5 | RNVC: 2

28 Jul 1995

5120-14-563-2841
Open End Wrench

145632841
76040: RNCC: 3 | RNVC: 2
20-4X5: RNCC: 5 | RNVC: 2

20 Jan 2010

5120-14-566-5687
Seal Inserter

145665687
99360329: RNCC: 3 | RNVC: 2

25 Nov 2010

5120-14-220-8548
Outil Demmanchement

142208548
PR46536: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-417-9697
Socket Wrench Handle

144179697
M120LG1300: RNCC: 3 | RNVC: 2

6 Aug 1987

5120-14-463-5617
Bearing And Bushing Remover

144635617
45057947: RNCC: 3 | RNVC: 2
45057947: RNCC: 5 | RNVC: 9

17 Jun 1993

5120-14-428-5238
Fixation Plaque

144285238
MFG4492102: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-438-7633
Spanner Wrench

144387633
321A95-0027-20: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-506-3977
Cle

145063977
80803T: RNCC: 3 | RNVC: 2
OUT380803T: RNCC: 5 | RNVC: 2
803T: RNCC: 5 | RNVC: 2

22 Apr 1998

5120-14-315-1257
Barre Soutien Mat

143151257
MD003-10-00REP12: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-476-5095
Pose Pieces Molette

144765095
101-128: RNCC: 3 | RNVC: 2
101128: RNCC: 3 | RNVC: 2
Z00.N6001507229: RNCC: 5 | RNVC: 2
Z00.N6001507229TBM: RNCC: 5 | RNVC: 9
F300 0T 016 5933: RNCC: 5 | RNVC: 9

14 Jun 1995

5120-14-304-3152
Cone De Montage

143043152
S16-0607-0818: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-275-2732
Embout A Oeil

142752732
20-711-13: RNCC: 3 | RNVC: 2
207-11-13: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-366-0256
Inclinai Horiz Pied

143660256
NO PRIMARY REF14-366-0256: RNCC: 3 | RNVC: 2
42-25-04-396: RNCC: 5 | RNVC: 9

4 Nov 1980

5120-14-424-2449
Open End Wrench

144242449
70-19X22: RNCC: 3 | RNVC: 2
91575409: RNCC: 5 | RNVC: 2
3272670282131: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-218-2980
Hand Material Handling Hook

142182980
BN311-545M14REP1: RNCC: 2 | RNVC: 2
GY19513: RNCC: 5 | RNVC: 2
GY19513: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-292-0803
Outillage Rodage

142920803
NO PRIMARY REF14-292-0803: RNCC: 3 | RNVC: 2
V77: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-402-4117
Torque Wrench Adapter

144024117
MHB459-25: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-456-8479
Hand Terminal Crimping Tool

144568479
576779: RNCC: 3 | RNVC: 2
85-694-6219: RNCC: 6 | RNVC: 9

24 Jul 1992

5120-14-352-3192
Face Spanner Wrench Socket

143523192
MHJ356-21: RNCC: 3 | RNVC: 2
MHJ356-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-450-7491
Cross Tip Screwdriver

144507491
NO PRIMARY REF14-450-7491: RNCC: 3 | RNVC: 2
EBPH1.5X30: RNCC: 5 | RNVC: 9
646050: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-288-1566
Embout

142881566
M3-202: RNCC: 3 | RNVC: 2
M3-202: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-324-3689
Spanner Wrench

143243689
D1553-8009: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-455-0152
Socket Wrench Socket

144550152
NO PRIMARY REF14-455-0152: RNCC: 3 | RNVC: 2
151027: RNCC: 5 | RNVC: 9

1 May 1992

5120-14-436-3577
Flat Tip Screwdriver

144363577
33565-00-12: RNCC: 3 | RNVC: 2

19 Dec 1989

5120-14-378-7594
Spanner Wrench

143787594
14270: RNCC: 3 | RNVC: 2

11 Aug 1982

5120-14-299-6412
Douille Sertissage

142996412
FF12X1B: RNCC: 3 | RNVC: 2
0T1647: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-572-8980
Plastic Mallet

145728980
216.60: RNCC: 3 | RNVC: 2

23 Aug 2012

5120-14-355-1428

5120-14-362-1757
Faux Mors

143621757
C46305: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-510-7719
Socket Wrench Socket

145107719
019-9-02405: RNCC: 3 | RNVC: 2

12 Nov 1998

5120-14-532-2525
Socket Wrench Socket

145322525
J.5/16LA: RNCC: 3 | RNVC: 2
00.46.58.02: RNCC: 5 | RNVC: 2

23 Oct 2002

5120-14-422-0111
Pliers

144220111
183.20CPY: RNCC: 3 | RNVC: 2
3148511420003: RNCC: 5 | RNVC: 2
0114323A00: RNCC: 5 | RNVC: 2
18513919-7: RNCC: 5 | RNVC: 2
91352546: RNCC: 5 | RNVC: 2
91634515: RNCC: 5 | RNVC: 2
0142000: RNCC: 5 | RNVC: 9

16 Feb 1988

5120-14-442-5439
Socket Wrench Socket

144425439
JB.3/8: RNCC: 3 | RNVC: 2
3148510291482: RNCC: 5 | RNVC: 2
JB-3-8: RNCC: 5 | RNVC: 2
0029148: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-216-5151
Screwdriver Bit

142165151
ST.3/8: RNCC: 3 | RNVC: 2
ST3-8: RNCC: 5 | RNVC: 2
ST3.8: RNCC: 5 | RNVC: 2
3148515189401: RNCC: 5 | RNVC: 2
0518940: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-397-3640
Spanner Wrench

143973640
125/D9923: RNCC: 3 | RNVC: 2
125: RNCC: 5 | RNVC: 2

8 Dec 1984

5120-14-379-8615
Calibre Pince Cabla

143798615
8499-03: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-321-7510
Hand Terminal Crimping Tool

143217510
NO PRIMARY REF14-321-7510: RNCC: 3 | RNVC: 2
3148511767009: RNCC: 5 | RNVC: 2
450: RNCC: 5 | RNVC: 2
0558 12: RNCC: 5 | RNVC: 2
0176700: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-302-4007
Screwdriver Bit

143024007
703A95-0000-22: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-227-8701

5120-14-507-7126

5120-14-412-3214
Socket Head Screw Key

144123214
46AM094: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-259-2654
Spanner Wrench

142592654
0U12776: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-451-7835
Hand Terminal Crimping Tool

144517835
548728: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-447-7907
Spanner Wrench

144477907
MBK052: RNCC: 3 | RNVC: 2

6 Jun 1991

5120-14-462-0624
Spanner Wrench

144620624
BLC23028: RNCC: 3 | RNVC: 2

31 Mar 1993

5120-14-296-2605
Spanner Wrench

142962605
M0NT21923: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-363-0030
Spanner Wrench

143630030
213183: RNCC: 3 | RNVC: 2

3 Apr 1980

5120-14-254-8130
Spanner Wrench

142548130
0224-78: RNCC: 3 | RNVC: 2
RA224: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-427-0601
Socket Wrench Extension

144270601
M4Z6021901801: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-391-6572
Open End Box Wrench Set

143916572
43.JE5: RNCC: 3 | RNVC: 2
91634553: RNCC: 5 | RNVC: 2
91577118: RNCC: 5 | RNVC: 2
3148515291005: RNCC: 5 | RNVC: 2
43JE5: RNCC: 5 | RNVC: 2
0529100: RNCC: 5 | RNVC: 9

21 Mar 1984

5120-14-442-5438
Socket Wrench Socket

144425438
JB.11/32: RNCC: 3 | RNVC: 2
3148510291451: RNCC: 5 | RNVC: 2
JB-11-32: RNCC: 5 | RNVC: 2
0029145: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-475-5168
Pliers

144755168
1429: RNCC: 3 | RNVC: 2
85-684-9000: RNCC: 6 | RNVC: 9

12 Apr 1995

5120-14-324-3110
Swivel Knob Jeweler's Screwdriver

143243110
166794: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-231-7261
Face Spanner Wrench Socket

142317261
PR46007: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-458-8855
Spanner Wrench

144588855
M35084: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-319-4291
Pliers

143194291
ER0P26: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-375-8092
Open End Wrench

143758092
16380950: RNCC: 3 | RNVC: 2
16380950: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-508-9574
Socket Head Screw Key

145089574
DF30124B: RNCC: 3 | RNVC: 9

7 Oct 1998

5120-14-417-1282
Evaseur

144171282
547944: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-219-2202

5120-14-315-1867
Mechanical Puller Attachment

143151867
0-65047-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-517-0552
Socket Wrench Socket

145170552
R.7/32E: RNCC: 3 | RNVC: 2

28 Oct 1999

5120-14-479-0620
Flat Tip Screwdriver

144790620
AG.6,5X150: RNCC: 3 | RNVC: 2
0240673A00: RNCC: 5 | RNVC: 2
3148510057125: RNCC: 5 | RNVC: 2
0005712: RNCC: 5 | RNVC: 9

13 Dec 1995

5120-14-483-1209
Socket Wrench Socket

144831209
J.3/8F: RNCC: 3 | RNVC: 2
3148510279022: RNCC: 5 | RNVC: 2
0027902: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-281-2913
Mandrin A Embase Mo

142812913
A0113953: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-343-1818
Pose Filet R Broche

143431818
01500605020: RNCC: 3 | RNVC: 2
01556050010: RNCC: 5 | RNVC: 2
01500605020: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-532-2423
Pliers

145322423
554: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-271-9791
Matrice De Sertissa

142719791
47820: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-291-1014

5120-14-506-9706
Porte-Outil Crochet

145069706
CKS.56A: RNCC: 3 | RNVC: 2
3148513414963: RNCC: 5 | RNVC: 2
CKS.56: RNCC: 5 | RNVC: 2

27 May 1998

5120-14-436-0265
Preformed Packing Inserter

144360265
RT30255: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-544-8398
Handling Tool Arm

145448398
PW3507: RNCC: 3 | RNVC: 2

1 Mar 2005

5120-14-318-6217
Spanner Wrench

143186217
C46318: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-255-5128
Spanner Wrench

142555128
3210-97-33-101: RNCC: 3 | RNVC: 2
08-334: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-270-5836

5120-14-231-8831
Extracteur Special

142318831
PR47323: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-574-4724
Seal Inserter

145744724
TM2252G001: RNCC: 3 | RNVC: 2

23 Jan 2013

5120-14-516-8035
Poussoir

145168035
5001008706: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-248-7471

5120-14-572-2505
Lamp Extractor

145722505
XVPCX13: RNCC: 3 | RNVC: 2

18 Jun 2012

5120-14-316-5018
Spanner Wrench

143165018
0U50097: RNCC: 3 | RNVC: 2
50097: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-539-2629
Mechanical Puller Body

145392629
T632G3009221: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-539-3148
Mechanical Puller Attachment

145393148
T651G3003222: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-488-3058
Pliers

144883058
422.MT: RNCC: 3 | RNVC: 2
0175766: RNCC: 5 | RNVC: 2
422MT: RNCC: 5 | RNVC: 2
3148511757666: RNCC: 5 | RNVC: 2
AA003475: RNCC: 6 | RNVC: 9

29 Apr 1997

5120-14-412-2352
Bearing And Bushing Inserter

144122352
8814261000: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-261-0371
Spanner Wrench

142610371
0357-78: RNCC: 3 | RNVC: 2
RA357: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-538-8797
Spanner Wrench

145388797
NGM0022030200427: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-460-0191
Adjustable Wrench

144600191
120009-SERT-7051: RNCC: 3 | RNVC: 2

7 Jan 1993

5120-14-305-6017
Retaining Ring Pliers

143056017
0146060: RNCC: 3 | RNVC: 2
101875: RNCC: 5 | RNVC: 2
199-23: RNCC: 5 | RNVC: 2
199.23: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-322-6103
Face Spanner Wrench Socket

143226103
3160S95-63-012: RNCC: 3 | RNVC: 2
85-100-3197: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-349-4472
Tournevis De Reglag

143494472
AT8764: RNCC: 3 | RNVC: 9
666522-002: RNCC: 5 | RNVC: 9

22 May 1978

5120-14-448-9160
Face Spanner Wrench Socket

144489160
600-917-70-01A: RNCC: 3 | RNVC: 2
600-917-70-01: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-472-3515
Socket Head Screw Key

144723515
82H.1,5: RNCC: 3 | RNVC: 2
3148511230015: RNCC: 5 | RNVC: 2
0110663K00: RNCC: 5 | RNVC: 2
91757162: RNCC: 5 | RNVC: 2
235-2858: RNCC: 5 | RNVC: 2
0715 31 35: RNCC: 5 | RNVC: 2
FACOM 82H1.5: RNCC: 5 | RNVC: 2
0123001: RNCC: 5 | RNVC: 9
FACOM82H.1,5: RNCC: 5 | RNVC: 9
958 237 002 001: RNCC: 6 | RNVC: 9

19 Oct 1994

5120-14-454-9401
Flat Tip Screwdriver

144549401
ARH.1,2X12: RNCC: 3 | RNVC: 2

29 Apr 1992

5120-14-541-0935
Valve Spring Lifter

145410935
U.13DC: RNCC: 3 | RNVC: 2
0066118: RNCC: 5 | RNVC: 2
U13DC: RNCC: 5 | RNVC: 2
NB000024: RNCC: 6 | RNVC: 9

14 May 2004

5120-14-530-7788
Socket Wrench Extension

145307788
J.215RC: RNCC: 3 | RNVC: 2

3 Jul 2002

5120-14-202-0306
Saddler's Sewing Awl

142020306
905-0: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-272-3303
A Fourche Cle

5120-14-382-5515
Electrical Card Extractor

143825515
NO PRIMARY REF14-382-5515: RNCC: 3 | RNVC: 2
20031322: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-417-0135
Spanner Wrench

144170135
J05107-03S202: RNCC: 3 | RNVC: 2
J05107-03-0000S202: RNCC: 5 | RNVC: 2

25 Jun 1987

5120-14-263-2680

5120-14-348-5085

5120-14-217-9960
Torque Wrench Adapter

142179960
0C2 3-8: RNCC: 3 | RNVC: 2
0C2-3-8: RNCC: 5 | RNVC: 2
0C2-3-8: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-290-7588
Ecope A Boues

142907588
33152: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-343-1832
Pose Filet R Broche

143431832
01500614020: RNCC: 3 | RNVC: 2
01556140010: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-226-3135

5120-14-527-9400
Socket Wrench Screwdriver Attachment

145279400
NSX.25A: RNCC: 3 | RNVC: 2

3 Dec 2001

5120-14-352-8428
Spanner Wrench

143528428
M31-117: RNCC: 3 | RNVC: 2
M31-117: RNCC: 5 | RNVC: 9

14 Nov 1978

5120-14-420-2273
Cle Potence

144202273
330A93-8705-00: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-521-2257
Screwdriver Bit

145212257
018-444-00826-000: RNCC: 3 | RNVC: 2
018-444-00826-000: RNCC: 3 | RNVC: 2
018-444-00826-000: RNCC: 5 | RNVC: 2
018-444-00826-000: RNCC: 5 | RNVC: 2

12 Jul 2000

5120-14-396-4123
Spanner Wrench

143964123
6274-51014: RNCC: 3 | RNVC: 2
6274-2502220: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-209-2784

5120-14-325-3444

5120-14-490-8746
Cle

144908746
4065 030 000 895: RNCC: 3 | RNVC: 2
F300 0T 000 4999: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-226-0027

5120-14-226-0013

5120-14-240-4202

5120-14-260-3552
Bearing And Bushing Remover

142603552
3130S95-68-022: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-438-9647
Socket Wrench Handle Bar

144389647
330A98-2187-11: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-505-9244
Flat Tip Screwdriver

145059244
ENFD6514-A0-8X4X125X245: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-511-8576
Screwdriver Bit

145118576
ED.113: RNCC: 3 | RNVC: 2
ED-113: RNCC: 5 | RNVC: 9
ED113: RNCC: 5 | RNVC: 9

27 Jan 1999

5120-14-514-5522
Flat Tip Screwdriver

145145522
ENFD6563-1X5-5X250: RNCC: 3 | RNVC: 2

28 May 1999

5120-14-416-5121
Spanner Wrench

144165121
7527-21500: RNCC: 3 | RNVC: 2

10 Jun 1987

5120-14-544-6302
Plug Electrical Connector Extractor

145446302
973-016511-90: RNCC: 3 | RNVC: 2

14 Feb 2005

5120-14-425-9455
Spanner Wrench

144259455
TH20C2-4A2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-300-9654
Face Spanner Wrench Socket

143009654
341A93-3223-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-433-1361
Socket Wrench Socket

144331361
K.22LA: RNCC: 3 | RNVC: 2
3148510301051: RNCC: 5 | RNVC: 2
91627161: RNCC: 5 | RNVC: 2
0030105: RNCC: 5 | RNVC: 9

11 Jul 1989

5120-14-446-8356
Socket Wrench Socket

144468356
K.36HA: RNCC: 3 | RNVC: 2
K36HA: RNCC: 5 | RNVC: 2
0715 141 36: RNCC: 5 | RNVC: 2
3148510300245: RNCC: 5 | RNVC: 2
0030024: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-461-7761
Support A Coulisse

144617761
1157: RNCC: 3 | RNVC: 2
3148512254003: RNCC: 5 | RNVC: 2
0225400: RNCC: 5 | RNVC: 9

24 Mar 1993

5120-14-490-6968
Pliers

144906968
241 P 01654 000: RNCC: 3 | RNVC: 2
F300 0T 000 1110: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-381-6753
Extraction Poignee

143816753
27112852-7: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-490-6960
Jack

144906960
241 J 00073 005: RNCC: 3 | RNVC: 2
F300 0T 000 1099: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6871
Drill

144906871
240 D 01530 000: RNCC: 3 | RNVC: 2
F300 0T 000 0976: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-272-4045

5120-14-269-5389

5120-14-325-8600
Galet Outil Reglage

143258600
15031085: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-201-2182

5120-14-468-0206
Socket Wrench Socket

144680206
7-018937-7: RNCC: 3 | RNVC: 2
7-018937-7: RNCC: 5 | RNVC: 9

8 Feb 1994

5120-14-466-5437
Socket Head Screw Key

144665437
104-2,5: RNCC: 3 | RNVC: 2
91745968: RNCC: 5 | RNVC: 2

15 Nov 1993

5120-14-237-9839
Socket Wrench Socket

142379839
0055400: RNCC: 3 | RNVC: 2
S.22L: RNCC: 5 | RNVC: 2
S22L: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-521-5322
Socket Wrench Socket

145215322
K.54HA: RNCC: 3 | RNVC: 2
K54HA: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-571-3465
Vise Jaw Caps

145713465
1223.M5: RNCC: 3 | RNVC: 2
FACOM 1223.M5: RNCC: 5 | RNVC: 2

15 Mar 2012

5120-14-367-4932

5120-14-296-8081

5120-14-378-5520
Demonta Bouchon Jet

143785520
6802J32-1233-20: RNCC: 3 | RNVC: 2
6802360A32-1233-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-412-4653
Bouchon Cle Special

144124653
F117053: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-416-7458
Fixation Support

144167458
536814: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-363-5110
Socket Head Screw Key

143635110
E9123504: RNCC: 3 | RNVC: 2
LC200-475: RNCC: 5 | RNVC: 2
LC014: RNCC: 5 | RNVC: 9
85-800-8679: RNCC: 6 | RNVC: 9

9 May 1980

5120-14-452-1185
Combination Box And Open End Wrench

144521185
39.10: RNCC: 3 | RNVC: 2
39.10: RNCC: 5 | RNVC: 2
3148510998763: RNCC: 5 | RNVC: 2
39-10: RNCC: 5 | RNVC: 2
0241532E00: RNCC: 5 | RNVC: 2
91718968: RNCC: 5 | RNVC: 2
0099876: RNCC: 5 | RNVC: 9

18 Dec 1991

5120-14-212-7976
Spanner Wrench

142127976
7062RURF49-35-71: RNCC: 3 | RNVC: 9

1 Jan 1964

5120-14-427-2500
Spanner Wrench

144272500
488402M83-06P1: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-264-0585

5120-14-387-5021
Outillage Calag Cap

143875021
915-4-96-220: RNCC: 3 | RNVC: 2

15 Sep 1983

5120-14-539-5098
Socket Wrench Handle Bar

145395098
160A.2: RNCC: 3 | RNVC: 2
160A2: RNCC: 5 | RNVC: 2
3148517128255: RNCC: 5 | RNVC: 2
8050494E00: RNCC: 5 | RNVC: 2

22 Jan 2004

5120-14-225-2051
Cle Douverture Demb

142252051
GC9-5-1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-576-3082
Mechanical Puller S

145763082
8811736002: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-224-9885

5120-14-548-6768
Spanner Wrench

145486768
10536843: RNCC: 3 | RNVC: 2

30 Jan 2006

5120-14-323-9971
Screwdriver Bit

143239971
61: RNCC: 3 | RNVC: 2
EB5: RNCC: 5 | RNVC: 2
303151: RNCC: 5 | RNVC: 2
91613370: RNCC: 5 | RNVC: 2
313151: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-437-8184
Spanner Wrench

144378184
095064F: RNCC: 3 | RNVC: 2
09528: RNCC: 5 | RNVC: 2

21 Feb 1990

5120-14-426-8244
Flat Tip Screwdriver

144268244
AGT.10X100: RNCC: 3 | RNVC: 2
AGT10X100: RNCC: 5 | RNVC: 2
3148510059105: RNCC: 5 | RNVC: 2
0005910: RNCC: 5 | RNVC: 9

23 Sep 1988

5120-14-280-1427

5120-14-340-6405
Screwdriver And Wrench Assembly

143406405
RS.5,5: RNCC: 3 | RNVC: 2
3148515138003: RNCC: 5 | RNVC: 2
RS5-5: RNCC: 5 | RNVC: 2
0513800: RNCC: 5 | RNVC: 9

14 Feb 1977

5120-14-511-0293
Socket Wrench Socket

145110293
R.7/16LA: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-548-5131
Socket Wrench Socket

145485131
M.60HA: RNCC: 3 | RNVC: 2
00.52.23.82: RNCC: 5 | RNVC: 2

24 Jan 2006

5120-14-530-2872
Mechanical Puller Attachment

145302872
U.23D11: RNCC: 3 | RNVC: 2
3148510668314: RNCC: 5 | RNVC: 2
U23D11: RNCC: 5 | RNVC: 2

28 May 2002

5120-14-425-9261
Manchon Emmanchemen

144259261
600120: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-574-4237
Mechanical Puller Step Plate

145744237
8816449002: RNCC: 3 | RNVC: 2

18 Jan 2013

5120-14-219-3269

5120-14-232-7164

5120-14-220-8542
Extracteur Special

142208542
PR46502: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-386-1624
Bearing And Bushing Inserter

143861624
6802J32-1665-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-382-0654
Spanner Wrench

143820654
1688: RNCC: 3 | RNVC: 2
85-692-1844: RNCC: 6 | RNVC: 9

25 Jan 1983

5120-14-333-3674
Face Spanner Wrench Socket

143333674
PR47088: RNCC: 3 | RNVC: 2
85-688-3195: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-393-3986
Wrench Kit

143933986
D83-54P3: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-461-6799
Flat Tip Screwdriver Set

144616799
NO PRIMARY REF14-461-6799: RNCC: 3 | RNVC: 2
3148515003158: RNCC: 5 | RNVC: 2
AC.JS4: RNCC: 5 | RNVC: 2

22 Mar 1993

5120-14-224-9897
Open End Wrench

142249897
10A21: RNCC: 3 | RNVC: 2
M6-022: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-541-9355
Wrench Kit

145419355
R.2A: RNCC: 3 | RNVC: 2
3148517309012: RNCC: 5 | RNVC: 2

2 Jul 2004

5120-14-491-0185
Douille

144910185
4602 008 200 003: RNCC: 3 | RNVC: 2
F300 0T 001 0974: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-9475
Vilebre

144909475
4280 146 000 001: RNCC: 3 | RNVC: 2
F300 0T 000 7209: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-256-8111

5120-14-493-1336
Cle

144931336
IF032007-2-01: RNCC: 3 | RNVC: 9
F300 0T 010 4562: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-576-4227
Hand Screw Jack

145764227
S5N-1A4-390VL: RNCC: 3 | RNVC: 2

19 Jun 2013

5120-14-385-3138
Socket Head Screw Key

143853138
360A93-3301-22: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-444-3440
Socket Wrench Adapter-Extension

144443440
GS71-5: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-329-9306
Screwdriver Bit

143299306
AAM.1: RNCC: 3 | RNVC: 2
3148510022802: RNCC: 5 | RNVC: 2
AAM1: RNCC: 5 | RNVC: 2
0002280: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-435-3434
Poignee Tournevis

144353434
08M060: RNCC: 3 | RNVC: 2

8 Nov 1989

5120-14-491-0156
Cle

144910156
4602 007 200 136: RNCC: 3 | RNVC: 2
F300 0T 001 0943: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-486-5628
Support De Cou

144865628
RT13681: RNCC: 3 | RNVC: 2

24 Mar 1997

5120-14-573-3434
Socket Wrench Socket

145733434
14100089074: RNCC: 3 | RNVC: 2

5 Oct 2012

5120-14-564-4448
Hole Sheet Metal Holder

145644448
50001032: RNCC: 3 | RNVC: 2
191629577: RNCC: 5 | RNVC: 2

29 Apr 2010

5120-14-228-5134

5120-14-322-5428

5120-14-313-3012

5120-14-247-1643
Bloc De Presertissa

142471643
PS8K: RNCC: 3 | RNVC: 2
P4PS8K: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-490-6982
Stock

144906982
241 S 05150 000: RNCC: 3 | RNVC: 2
F300 0T 000 1155: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-516-8048
Poussoir

145168048
5001008874: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-201-1374

5120-14-377-5771
Leveling-Support Jack

143775771
A2658350: RNCC: 3 | RNVC: 2
A26583-50: RNCC: 3 | RNVC: 2
16293203: RNCC: 5 | RNVC: 2
A2658350: RNCC: 5 | RNVC: 2
A26583-50: RNCC: 5 | RNVC: 9
A26583-50: RNCC: 5 | RNVC: 9

10 Jun 1982

5120-14-335-8931
Socket Head Screw Key

143358931
NO PRIMARY REF14-335-8931: RNCC: 3 | RNVC: 2
404196407: RNCC: 5 | RNVC: 9

24 Jul 1976

5120-14-276-6385

5120-14-279-8431
Freinoir

142798431
8810007054: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-214-2843
Cle Speciale Pour T

142142843
9970-115-251: RNCC: 3 | RNVC: 2
9970-115-251-01: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-490-6934
File

144906934
241 F 01560 000: RNCC: 3 | RNVC: 2
F300 0T 000 1064: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-281-2984
Douille A Ergots Ba

142812984
C46934: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-397-7619
Cle A Ergots

5120-14-397-7618
Cle A Ergots

5120-14-265-9401
Fer De Calfat A Clo

5120-14-396-5034
A Main Marteau

5120-14-465-7373
Screw Push-Pull Jack

144657373
C1080294: RNCC: 3 | RNVC: 2
RAB1971: RNCC: 5 | RNVC: 2
M145-13-00: RNCC: 5 | RNVC: 2

14 Oct 1993

5120-14-309-7453
Bearing And Bushing Inserter

143097453
341A98-2022-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-256-7588

5120-14-344-3879

5120-14-259-9546

5120-14-281-2921
Bloc De Maintien En

142812921
A0115538: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-308-2159

5120-14-257-5037

5120-14-416-7455
Positionnemen Guide

144167455
530753: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-563-1939
Drive Pin Punch

145631939
522408: RNCC: 3 | RNVC: 2

13 Jan 2010

5120-14-225-3189

5120-14-424-5613
Socket Wrench Adapter

144245613
0980156: RNCC: 3 | RNVC: 2
SP.1736: RNCC: 5 | RNVC: 2
SP1736: RNCC: 5 | RNVC: 2

28 May 1988

5120-14-424-5257
Face Spanner Wrench Socket

144245257
7M473: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-429-8698
Face Spanner Wrench Socket

144298698
390048: RNCC: 3 | RNVC: 2

15 Feb 1989

5120-14-253-6250
Spanner Wrench

142536250
0244-78: RNCC: 3 | RNVC: 2
RA244: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-391-2067
Socket Wrench Socket Set

143912067
75SL12P: RNCC: 3 | RNVC: 2
0515420: RNCC: 3 | RNVC: 2
S404U: RNCC: 5 | RNVC: 2
S-404U: RNCC: 5 | RNVC: 2
S.404U: RNCC: 5 | RNVC: 2

1 Mar 1984

5120-14-513-7314
Flat Tip Screwdriver

145137314
ENFD6561-0-5X3X100: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-423-4225
Basculeur Cle Dyn

144234225
SP1735D-3-1070: RNCC: 3 | RNVC: 2

19 Apr 1988

5120-14-287-9099
Open End Wrench

142879099
10NC14X15: RNCC: 3 | RNVC: 2
3599052: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-439-1212
Plug Electrical Connector Extractor

144391212
3490-4: RNCC: 3 | RNVC: 2
91453432: RNCC: 5 | RNVC: 2

25 Apr 1990

5120-14-299-2992
Spanner Wrench

142992992
28181-1: RNCC: 3 | RNVC: 2
28181-1: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-451-4159
Flat Tip Screwdriver

144514159
AG.5,5X150: RNCC: 3 | RNVC: 2
3059001330: RNCC: 5 | RNVC: 2
AG.5,5X150: RNCC: 5 | RNVC: 2
3148510057033: RNCC: 5 | RNVC: 2
AG5,5X150: RNCC: 5 | RNVC: 2
8054900C00: RNCC: 5 | RNVC: 2
91718975: RNCC: 5 | RNVC: 2
0005703: RNCC: 5 | RNVC: 9
005703: RNCC: 5 | RNVC: 9

19 Nov 1991

5120-14-401-5299
Sheet Metalworking Dolly Block

144015299
907: RNCC: 3 | RNVC: 2
3148512132004: RNCC: 5 | RNVC: 2
0213200: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-470-1713
Screwdriver Bit

144701713
ES.134T: RNCC: 3 | RNVC: 2
ES.134T: RNCC: 5 | RNVC: 2
3148510249858: RNCC: 5 | RNVC: 2
ES134T: RNCC: 5 | RNVC: 2
1059105K00: RNCC: 5 | RNVC: 2
91778014: RNCC: 5 | RNVC: 2
E.S.134T: RNCC: 5 | RNVC: 2
0024985: RNCC: 5 | RNVC: 9

6 Jun 1994

5120-14-249-9435
Socket Wrench Socket

142499435
M.65: RNCC: 3 | RNVC: 2
3148510318301: RNCC: 5 | RNVC: 2
M65: RNCC: 5 | RNVC: 2
0031830: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-276-3139
Socket Wrench Socket

142763139
K29: RNCC: 3 | RNVC: 2
C-29: RNCC: 3 | RNVC: 2
C29: RNCC: 3 | RNVC: 2
K29: RNCC: 3 | RNVC: 2
3272670301214: RNCC: 5 | RNVC: 2
DEMK29: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-530-2020
Socket Wrench Socket

145302020
S.15/16LA: RNCC: 3 | RNVC: 2
00.49.27.77: RNCC: 5 | RNVC: 2
3148510558059: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-220-8538
Mordache Speciale C

142208538
PR46484: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-220-8545
Cle A Bequille A Si

142208545
PR46523: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-456-8023
Guides De Culasse

144568023
8-0115A: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-571-7363
Screwdriver Bit

145717363
E-111-H3: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-314-7189

5120-14-246-2311

5120-14-276-3177
Socket Wrench Socket

142763177
S9-16L: RNCC: 3 | RNVC: 2
SL9-16: RNCC: 3 | RNVC: 2
65LT9-16: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-386-6570
Face Spanner Wrench Socket

143866570
9970-115-448: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-410-6334
Outil Jauge Combust

144106334
P4-10: RNCC: 3 | RNVC: 2
P4-10: RNCC: 5 | RNVC: 9

9 Jul 1986

5120-14-338-2619
Electrical Contact Remover

143382619
OUT-DB-CAL16-20F: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-333-7352

5120-14-239-2134

5120-14-483-4216
Outil Verification

144834216
46117554: RNCC: 3 | RNVC: 2
46117554: RNCC: 5 | RNVC: 9

12 Sep 1996

5120-14-416-7617
Mandrin Presse

144167617
540103: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-251-3967
Obus Extracteur

142513967
17-9-37: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-481-9341
Extracteur Poignee

144819341
45677716: RNCC: 3 | RNVC: 9

8 Jun 1996

5120-14-269-4805

5120-14-490-8910
Lime

144908910
4067 210 000 530: RNCC: 3 | RNVC: 2
F300 0T 000 5184: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-380-6133
Screwdriver Bit

143806133
1019-4B: RNCC: 3 | RNVC: 2

29 Nov 1982

5120-14-548-6391
Face Spanner Wrench Socket

145486391
Q47787: RNCC: 3 | RNVC: 2
Q47787: RNCC: 5 | RNVC: 2

27 Jan 2006

5120-14-392-7965
Electrical Card Extractor

143927965
2553078: RNCC: 3 | RNVC: 2
22388013: RNCC: 3 | RNVC: 2
2553078: RNCC: 5 | RNVC: 2
22388013: RNCC: 5 | RNVC: 9

7 Apr 1984

5120-14-541-3838
Hand Blind Riveter

145413838
12591: RNCC: 3 | RNVC: 2

3 Jun 2004

5120-14-457-8448
Screwdriver Bit Extension

144578448
M4HZ7101947701: RNCC: 3 | RNVC: 2

24 Sep 1992

5120-14-234-3667
Socket Wrench Screwdriver Attachment

142343667
JP4: RNCC: 3 | RNVC: 2
3148515058608: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-356-1495
Socket Wrench Handle

143561495
99250311502: RNCC: 3 | RNVC: 2
S.157: RNCC: 3 | RNVC: 2
99-250-31-150-2: RNCC: 5 | RNVC: 2
GESM827570: RNCC: 5 | RNVC: 2
3148510568690: RNCC: 5 | RNVC: 2
S157: RNCC: 5 | RNVC: 2
0056869: RNCC: 5 | RNVC: 9

5 Apr 1979

5120-14-392-0833
Socket Wrench Crowfoot Attachment

143920833
853-115-012-0: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-205-8248
Lance A Fourche

142058248
NO PRIMARY REF14-205-8248: RNCC: 3 | RNVC: 2
5824: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-514-9858
Screwdriver Bit

145149858
ENH.307: RNCC: 3 | RNVC: 2
3148510238883: RNCC: 5 | RNVC: 2

25 Jun 1999

5120-14-503-4667
Electronic Component Inserter And Remover

145034667
20303790: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-444-3269
Socket Wrench Socket Set

144443269
J.420E: RNCC: 3 | RNVC: 2
J420E: RNCC: 5 | RNVC: 2
3148515042607: RNCC: 5 | RNVC: 2
91727576: RNCC: 5 | RNVC: 2
0504260: RNCC: 5 | RNVC: 9

8 Jan 1991

5120-14-299-2993
Spanner Wrench

142992993
28181-2: RNCC: 3 | RNVC: 2
28181-2: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-456-0308
Socket Head Screw Key

144560308
KT6989: RNCC: 3 | RNVC: 2

11 Jun 1992

5120-14-323-9972

5120-14-325-2946
Flat Tip Screwdriver

143252946
846411: RNCC: 3 | RNVC: 2
85-688-0909: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-300-9505
Corps De Verin

143009505
341A91-0055-38: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-242-0997
Pliers

142420997
E73-150-220: RNCC: 2 | RNVC: 2
239-1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-283-3916
Outil A Poinconner

142833916
9970-115-317: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-484-0384
Segme Monte Douille

144840384
OU134022-2: RNCC: 3 | RNVC: 2
OU134022-2: RNCC: 5 | RNVC: 2
OU134022-2: RNCC: 5 | RNVC: 9
F300 0T 021 8922: RNCC: 6 | RNVC: 9

17 Oct 1996

5120-14-380-4133
Electrical Card Extractor

143804133
2-16434: RNCC: 3 | RNVC: 2

8 Nov 1982

5120-14-247-9664
Cle A Fourche

142479664
RT20931: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-445-7059
Torque Wrench Adapter

144457059
10.3/4: RNCC: 3 | RNVC: 2
3148510926308: RNCC: 5 | RNVC: 2
0092630: RNCC: 5 | RNVC: 9

22 Feb 1991

5120-14-466-9056
Open End Wrench

144669056
444076: RNCC: 3 | RNVC: 2
EA20198: RNCC: 5 | RNVC: 2

9 Dec 1993

5120-14-545-9275
Adjustable Wrench

145459275
113C.24C: RNCC: 3 | RNVC: 2

30 May 2005

5120-14-360-6448
Mechanical Puller Attachment

143606448
8810382007: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-411-6287
Bearing And Bushing Inserter

144116287
71852: RNCC: 3 | RNVC: 2
00076851: RNCC: 5 | RNVC: 2

27 Aug 1986

5120-14-329-8313
Spanner Wrench

143298313
RT13784: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-501-5353
Rallonge De Tube

145015353
SE083CE04: RNCC: 3 | RNVC: 2

3 Nov 1997

5120-14-416-7471
Positionnemen Outil

144167471
536886: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-343-8370

5120-14-441-2297
Bearing And Bushing Inserter And Remover

144412297
6804E31-1123-21: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-222-7392
Open End Wrench

142227392
20S8X9: RNCC: 3 | RNVC: 2
19-8X9: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-288-6994
Spanner Wrench

142886994
D1553-4839: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-260-3613
Bearing And Bushing Inserter And Remover

142603613
3160-95-33-148: RNCC: 3 | RNVC: 2
3160S95-33-148: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-388-2298
Socket Wrench Handle Bar

143882298
VTR501-2-10542: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-506-3968
Tampons Jeu Piges

145063968
7014T: RNCC: 3 | RNVC: 2
OUT307014T: RNCC: 5 | RNVC: 2

22 Apr 1998

5120-14-244-4101

5120-14-355-1882
Ecrous Divers Cle

143551882
18225: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-428-5294
De Controle Levier

144285294
MJN346241301: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-395-7153

Load More Results