What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 72 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 72 of 110

5120-14-353-7182

5120-14-226-3118
Outil Extraction Ro

142263118
60290-01-400M6: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-390-6148
Arrache Bague

143906148
DLP751760: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-249-3941
Tournevis Special

142493941
3210-95-55-010: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-391-8409
Rotule Extracteur

143918409
TMY20-32-326: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-292-0785
Goujonniere

142920785
NO PRIMARY REF14-292-0785: RNCC: 3 | RNVC: 2
145J357-358: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-283-4938
Cle Speciale

142834938
406991: RNCC: 3 | RNVC: 2
406991: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-262-2021

5120-14-255-2936

5120-14-484-1113
Spanner Wrench

144841113
859640: RNCC: 3 | RNVC: 2
859640: RNCC: 5 | RNVC: 9

24 Oct 1996

5120-14-485-4597
Seal Inserter And Remover

144854597
TC3021G001: RNCC: 3 | RNVC: 2

23 Jan 1997

5120-14-235-8664

5120-14-246-2299

5120-14-490-6972
Saw

144906972
241 S 00143 000: RNCC: 3 | RNVC: 2
F300 0T 000 1140: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-1583
Flat Tip Screwdriver

144901583
DC.4: RNCC: 3 | RNVC: 2
0019862: RNCC: 5 | RNVC: 2
3148510198620: RNCC: 5 | RNVC: 2

17 Sep 1997

5120-14-402-4290
Solid Center Punch

144024290
70103: RNCC: 3 | RNVC: 2
0201-3-5: RNCC: 5 | RNVC: 2
701/3: RNCC: 5 | RNVC: 2

3 Jul 1985

5120-14-441-2468
Socket Wrench Socket

144412468
6201E11-1555-21: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-227-5661
Cle Speciale

142275661
044BBM4BREP9-10: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-353-7184

5120-14-416-7533
Plaque D'appui

144167533
537350: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-315-1887
Chasse-Frein Darbre

143151887
0-700287-1-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-476-3275
Socket Wrench Socket

144763275
S.27LA: RNCC: 3 | RNVC: 2
0055455: RNCC: 5 | RNVC: 2
3148510554556: RNCC: 5 | RNVC: 2
S27LA: RNCC: 5 | RNVC: 2

7 Jun 1995

5120-14-417-6799
Flat Tip Screwdriver

144176799
202-5: RNCC: 3 | RNVC: 2

22 Jul 1987

5120-14-540-6912

5120-14-264-0583
Quick Adjusting Screw Clamp

142640583
3225-200: RNCC: 3 | RNVC: 2
SOE03-200: RNCC: 3 | RNVC: 2
2688-200: RNCC: 3 | RNVC: 9

1 Jan 1970

5120-14-332-3841
Face Spanner Wrench Socket

143323841
M31-092: RNCC: 3 | RNVC: 2
M31092: RNCC: 5 | RNVC: 2
M31-092: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-223-5353
Cle Pour Ecrou A En

142235353
044BBC4BBF4AREP9: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-462-1714
Dispositif Position

144621714
7-010432-0: RNCC: 3 | RNVC: 2
7-010432-0: RNCC: 5 | RNVC: 9

13 Apr 1993

5120-14-382-7622
Electrical Contact Inserter

143827622
809847: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-340-7983
Spanner Wrench

143407983
14369-5003: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-232-7987
Socket Wrench Socket

142327987
15137T5: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-530-3601
Six Point Tip Screwdriver

145303601
AZXR.15X75: RNCC: 3 | RNVC: 2

5 Jun 2002

5120-14-410-2305
Cle Speciale

144102305
39216451: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-281-2963
Cle A Ergots Boitie

142812963
C46833: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-256-5824
Open End Wrench

142565824
E74302C14-17AGW: RNCC: 2 | RNVC: 2

1 Jan 1969

5120-14-406-9992
Mechanical Puller Step Plate

144069992
780BELOG2-3N: RNCC: 3 | RNVC: 2

24 Jan 1986

5120-14-329-6324
Socket Head Screw Key Set

143296324
M31-044: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-344-4855
Open End Wrench

143444855
9970-115-629: RNCC: 3 | RNVC: 2
85-689-5595: RNCC: 6 | RNVC: 9

10 Aug 1977

5120-14-466-5144
Socket Wrench Socket

144665144
OCE83-30F: RNCC: 3 | RNVC: 2
30F: RNCC: 5 | RNVC: 2
1122781S00: RNCC: 5 | RNVC: 2
0CE83-30F: RNCC: 5 | RNVC: 2

15 Nov 1993

5120-14-436-0246
Cle Serrage Bouchon

144360246
815708: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-443-9721

5120-14-255-6359

5120-14-558-1787
Mechanical Puller

145581787
62100046AA: RNCC: 3 | RNVC: 2

9 Sep 2008

5120-14-561-7628
Combination Box And Open End Wrench

145617628
440.25: RNCC: 3 | RNVC: 2
0768124: RNCC: 5 | RNVC: 2
3148517681248: RNCC: 5 | RNVC: 2
440.25: RNCC: 5 | RNVC: 2

3 Sep 2009

5120-14-459-9276
Hand Hydraulic Jack Kit

144599276
76545914200: RNCC: 3 | RNVC: 2
43595506: RNCC: 5 | RNVC: 2
N729581: RNCC: 5 | RNVC: 2

4 Jan 1993

5120-14-459-1665
Bearing Staking Installation Tool

144591665
45215423: RNCC: 3 | RNVC: 2
45215423: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-393-4929
Socket Head Screw Key

143934929
265458011: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-322-0799
Spanner Wrench

143220799
90453: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-507-5805
Hand-Operated Grommet And Eyelet Press

145075805
43.00709: RNCC: 3 | RNVC: 2

23 Jul 1998

5120-14-413-0633
Pliers

144130633
47928009: RNCC: 3 | RNVC: 2

26 Nov 1986

5120-14-254-3210
Pliers

142543210
284: RNCC: 3 | RNVC: 2
G284: RNCC: 3 | RNVC: 2
3272670017139: RNCC: 5 | RNVC: 2
91729359: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-466-7484
Torque Wrench Adapter

144667484
523793: RNCC: 3 | RNVC: 2
A523793: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-350-5341
Flat Tip Screwdriver Set

143505341
525273: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-280-4135
Spanner Wrench

142804135
C54551: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-532-0718
Socket Head Screw Key

145320718
188026: RNCC: 3 | RNVC: 2

9 Oct 2002

5120-14-414-9614
Flat Tip Screwdriver

144149614
AGH.10X200: RNCC: 3 | RNVC: 2
3148510058641: RNCC: 5 | RNVC: 2
AGH10X200: RNCC: 5 | RNVC: 2
0005864: RNCC: 5 | RNVC: 9

26 Mar 1987

5120-14-363-4665
Socket Wrench Socket

143634665
W267M: RNCC: 3 | RNVC: 9

9 May 1980

5120-14-446-6367
Seal Inserter And Remover

144466367
8813360000: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-249-9472

5120-14-497-3055
Tournevis

144973055
RX4043: RNCC: 3 | RNVC: 2
F300 0T 022 9878: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-280-8781

5120-14-221-0625

5120-14-516-8031
Poussoir

145168031
5001008710: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-448-9597
Socket Head Screw Key

144489597
0126520: RNCC: 3 | RNVC: 2
3148511266670: RNCC: 5 | RNVC: 2
88 1,5: RNCC: 5 | RNVC: 2
88-1-5: RNCC: 5 | RNVC: 2
88E.1,5X75: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-339-5486
Socket Wrench Socket

143395486
9970-111-191: RNCC: 3 | RNVC: 2

18 Jan 1977

5120-14-220-8197
Open End Wrench

142208197
BB72-5X7: RNCC: 3 | RNVC: 9

1 Jan 1965

5120-14-245-2080
Outil Dinsertion Co

142452080
M15513-12: RNCC: 3 | RNVC: 2
00-858-1458: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-422-8387
Goujonniere

144228387
6501-330A11-0000-00: RNCC: 3 | RNVC: 2
6501-330A11-0000-00: RNCC: 5 | RNVC: 2

22 Mar 1988

5120-14-247-2033

5120-14-447-1469
Outil D'installatio

144471469
M4DZ7101904001: RNCC: 3 | RNVC: 2

3 May 1991

5120-14-215-6290

5120-14-469-0405
Flat Tip Screwdriver

144690405
N274-MP-5: RNCC: 3 | RNVC: 2
N274.MP.5: RNCC: 3 | RNVC: 2
3272670355651: RNCC: 5 | RNVC: 2

5 Apr 1994

5120-14-212-9109
Pince Speciale Outi

142129109
9970-111-065: RNCC: 3 | RNVC: 2
9970-111-065-00: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-486-4458
Cle Speciale

144864458
RT13624: RNCC: 3 | RNVC: 2

21 Mar 1997

5120-14-395-0762
Montage Cone

143950762
H46580: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-425-9274
Poussoir

144259274
600171: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-313-7258
Cone De Guidage

143137258
C47185: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-225-5591
Extracteur De Clape

142255591
42140: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-558-0424
Cross Tip Screwdriver

145580424
ANP0X75: RNCC: 3 | RNVC: 2
91883649: RNCC: 5 | RNVC: 2
FACOM ANP0X75: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-479-4274
De Pose Mandrin

144794274
H46668-100: RNCC: 3 | RNVC: 2

10 Jan 1996

5120-14-458-1194
Seal Inserter And Remover

144581194
30AS520830-1A3: RNCC: 3 | RNVC: 9

8 Oct 1992

5120-14-308-2156

5120-14-238-1217
Open End Wrench

142381217
69-13: RNCC: 3 | RNVC: 2
E74301C13AGW: RNCC: 5 | RNVC: 2
3272670250963: RNCC: 5 | RNVC: 2
69-13CA: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-208-9788
Open End Wrench

142089788
C10-10: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-437-1632
Outillage De Test

144371632
27402882-8: RNCC: 3 | RNVC: 2

17 Jan 1990

5120-14-202-8247
Adjustable Wrench

142028247
E74322-230: RNCC: 2 | RNVC: 2
AMG38841: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-338-4756
Corps Fixe

143384756
PR46487-3: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-268-4940

5120-14-253-4562
Verin Hydraulique S

142534562
321-97-0000: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-554-2442
Hand Screw Jack

145542442
A700021020: RNCC: 3 | RNVC: 2

14 Jun 2007

5120-14-209-4224

5120-14-286-7830

5120-14-491-0107
Abat Ca

144910107
4602 005 500 001: RNCC: 3 | RNVC: 2
F300 0T 001 0889: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-448-4587
Open End Wrench

144484587
NO PRIMARY REF14-448-4587: RNCC: 3 | RNVC: 2
0102365: RNCC: 5 | RNVC: 2
1063700E00: RNCC: 5 | RNVC: 2
44A 5,5X7: RNCC: 5 | RNVC: 9

26 Jun 1991

5120-14-569-0308
Mechanical Puller

145690308
F27343000-1: RNCC: 3 | RNVC: 2
F27343000: RNCC: 3 | RNVC: 9
F27343000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-444-9286
Flat Tip Screwdriver

144449286
NO PRIMARY REF14-444-9286: RNCC: 3 | RNVC: 2
1028588E00: RNCC: 5 | RNVC: 2
162-7511: RNCC: 5 | RNVC: 2
3148510039329: RNCC: 5 | RNVC: 2
ACH.5,5X250: RNCC: 5 | RNVC: 2
FACOMACH.5,5X250: RNCC: 5 | RNVC: 9
0003932: RNCC: 5 | RNVC: 9

29 Jan 1991

5120-14-516-8001
Poussoir

145168001
5001008742: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-228-5933

5120-14-567-0838
Open End Wrench

145670838
467.16: RNCC: 3 | RNVC: 2
3148518201483: RNCC: 5 | RNVC: 2

4 Feb 2011

5120-14-217-2703
Cle Pour Raccord

142172703
M17-025: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-222-7903
Adjustable Wrench

142227903
E74321-300NKB: RNCC: 2 | RNVC: 2
0056122104: RNCC: 3 | RNVC: 2
0852475400: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-274-8540
Socket Head Screw Key

142748540
E74331-6UJW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-348-9773
Spanner Wrench

143489773
E74-323-105A117CUPR0ALU: RNCC: 2 | RNVC: 2
SYQ0082: RNCC: 5 | RNVC: 2

19 Apr 1978

5120-14-226-7424
Open End Wrench

142267424
30-4X4: RNCC: 3 | RNVC: 2
85-638-9030: RNCC: 6 | RNVC: 9

1 Jan 1966

5120-14-445-9082
Socket Wrench Socket

144459082
120060: RNCC: 3 | RNVC: 2
89415330: RNCC: 5 | RNVC: 2
120060: RNCC: 5 | RNVC: 9

27 Feb 1991

5120-14-385-9674
Spanner Wrench

143859674
139580S: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-462-9126
Bearing And Bushing Inserter And Remover

144629126
45057940: RNCC: 3 | RNVC: 2
45057940: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-268-1452

5120-14-463-6002
Outil Mesure De Jeu

144636002
9689160157: RNCC: 3 | RNVC: 2
9689160157: RNCC: 5 | RNVC: 2
RAB1314: RNCC: 5 | RNVC: 2

21 Jun 1993

5120-14-312-3570

5120-14-381-4483
Pare-B Mont Out Lot

143814483
D.80: RNCC: 3 | RNVC: 2
3148515032400: RNCC: 5 | RNVC: 2
D80: RNCC: 5 | RNVC: 2
0503240: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-418-2446
Cle Atop

5120-14-362-1765
Tas De Sertissage

143621765
C46419: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-467-0647
Terminal Crimping Tool Contact Positioner

144670647
282974: RNCC: 3 | RNVC: 2
85-801-3022: RNCC: 6 | RNVC: 9

16 Dec 1993

5120-14-389-3432
Spanner Wrench

143893432
098102: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-554-5304
Screwdriver Bit

145545304
3148516396211: RNCC: 3 | RNVC: 2
639621: RNCC: 3 | RNVC: 2
ECAR603: RNCC: 5 | RNVC: 2

18 Jul 2007

5120-14-409-3587
Open End Wrench

144093587
73102: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-546-9144
Mattock

145469144
054077: RNCC: 3 | RNVC: 2

7 Sep 2005

5120-14-299-2990
Drift

142992990
28666: RNCC: 3 | RNVC: 2
28666: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-433-3289
Handling Tool Arm

144333289
540328: RNCC: 3 | RNVC: 2
00540328: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-272-3592
Spanner Wrench

142723592
E74323A40AGW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-530-4295
Pliers

145304295
433.LE: RNCC: 3 | RNVC: 2

12 Jun 2002

5120-14-360-6466
Mechanical Puller Attachment

143606466
8810215001: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-421-3524
Spanner Wrench

144213524
540354: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-379-2941
Extracteur Induit

143792941
2-22378: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-560-8810
Mechanical Puller

145608810
98590: RNCC: 3 | RNVC: 2

28 May 2009

5120-14-564-9046
Gear Inserter

145649046
885562: RNCC: 3 | RNVC: 2

16 Jun 2010

5120-14-282-6376

5120-14-390-4849
Emmanche Bague

143904849
DLP751390: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-421-4364
Hand Driven Hydraulic Ram Pump

144214364
P39TAREE3000KGS: RNCC: 3 | RNVC: 9

14 Jan 1988

144984624
91967340: RNCC: 3 | RNVC: 2
P09012-101-6: RNCC: 5 | RNVC: 9
F300 0T 005 1644: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-481-3152
Flat Tip Screwdriver

144813152
GS210-5,5X150: RNCC: 3 | RNVC: 2
1.70.3520: RNCC: 5 | RNVC: 2

1 May 1996

5120-14-459-0727
Cle Speciale

144590727
DLP757450: RNCC: 3 | RNVC: 2
5016AT8: RNCC: 5 | RNVC: 2

18 Nov 1992

5120-14-333-8681

5120-14-241-1474
Cle A Ergots Specia

142411474
0667-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-527-9149
Spring Inserter And Remover

145279149
888-481-200-1: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-355-1921
Coup Outil A Sertir

143551921
VDP7540: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-576-6571
Mechanical Puller S

145766571
8812034202: RNCC: 3 | RNVC: 2

3 Jul 2013

5120-14-237-4522
Nez Outil De Demont

142374522
M15515-25-5: RNCC: 3 | RNVC: 2
15515-25-5: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-444-3185
Combination Box And Open End Wrench

144443185
GS130-11: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-201-5525
Poincon A Chev Lame

142015525
NO PRIMARY REF14-201-5525: RNCC: 3 | RNVC: 2
109-7: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-465-4732
Bearing And Bushing Remover

144654732
851-500-185-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-401-5204
Offset Screwdriver Set

144015204
NO PRIMARY REF14-401-5204: RNCC: 3 | RNVC: 2
ADZ-APZPC: RNCC: 5 | RNVC: 2
91598536: RNCC: 5 | RNVC: 2

13 Jun 1985

5120-14-427-1484
Socket Head Screw Key

144271484
6252-54281: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-489-8739
Solid Center Punch

144898739
NO PRIMARY REF 14-489-8739: RNCC: 3 | RNVC: 2
500.0.07: RNCC: 5 | RNVC: 9

27 Aug 1997

5120-14-229-5406
Extracteur En Acier

142295406
4320901: RNCC: 3 | RNVC: 2
4320901: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-309-7571

5120-14-280-1398

5120-14-363-6036

5120-14-338-4728
Ergots De Cle

143384728
C46352-3: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-531-9900
Socket Head Screw Key

145319900
Y00006570: RNCC: 3 | RNVC: 2

4 Oct 2002

5120-14-530-0742
Brad Awl

145300742
010325228S: RNCC: 3 | RNVC: 2

6 May 2002

5120-14-547-8931
Socket Wrench Adapter-Extension

145478931
8049736G00: RNCC: 3 | RNVC: 2

22 Nov 2005

5120-14-430-0864
Spanner Wrench

144300864
6814-70641: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-418-5309

5120-14-558-0417
Flat Tip Screwdriver

145580417
ANF10X200: RNCC: 3 | RNVC: 2
0773214: RNCC: 5 | RNVC: 2
3148517732148: RNCC: 5 | RNVC: 2
773214: RNCC: 5 | RNVC: 2
91883644: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-231-9950

5120-14-325-3435

5120-14-214-3092
Cle Speciale

142143092
RT2778: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-257-1185
Poignee Pivot Cle D

142571185
J200P: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-463-0644
Cle Connecteur

144630644
2-50169: RNCC: 3 | RNVC: 2

17 May 1993

5120-14-303-6423
Torque Wrench Adapter

143036423
D09: RNCC: 3 | RNVC: 2
D0-9: RNCC: 3 | RNVC: 2
3272670272484: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-221-7164
Cle En Bout Special

142217164
9970-115-220: RNCC: 3 | RNVC: 2
9970-115-220-02: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-327-5623
Flat Tip Screwdriver

143275623
E74-351-1X6-5X100R0NDEIS0LEE: RNCC: 2 | RNVC: 2
AY.6,5X100: RNCC: 3 | RNVC: 2
253MG-12: RNCC: 3 | RNVC: 2
253MG12: RNCC: 3 | RNVC: 2
3148510133201: RNCC: 5 | RNVC: 2
AY6-5X100: RNCC: 5 | RNVC: 2
3272670242012: RNCC: 5 | RNVC: 2
0013320: RNCC: 5 | RNVC: 9
AY6X100: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-468-9838
Seal Inserter And Remover

144689838
40N108377: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-329-5952
Face Spanner Wrench Socket

143295952
C47455: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-320-4417
Open End Wrench

143204417
A132416: RNCC: 3 | RNVC: 2
100337: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-505-9341
Bearing And Bushing Inserter And Remover

145059341
H117169A: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-227-4624
Outil D'installatio

142274624
380518-6: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-411-2970
Pince Pour Serre-Ca

5120-14-413-5687

5120-14-413-5655

5120-14-417-1281
Table A Main

144171281
547943: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-417-0782
Liaison Plateau

144170782
6145REP2: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-361-4351

5120-14-245-1813

5120-14-559-6069
Mechanical Puller

145596069
8813225000: RNCC: 3 | RNVC: 2

2 Feb 2009

5120-14-208-7301

5120-14-224-3073

5120-14-506-7648
De Rincag Outillage

145067648
M12550: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-262-7502

5120-14-360-6722
A Guide Mandrin

143606722
000394013: RNCC: 3 | RNVC: 9

19 Dec 1979

5120-14-281-2962
Cle A Fourche Ecrou

142812962
C46825: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-435-0698
Socket Wrench Socket

144350698
853-201-041-0: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-231-7232
Poingnee De Maintie

142317232
9970-111-094: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-253-9737
Fausse Fusee Roue D

142539737
PR46849: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-463-1689
Mechanical Puller Attachment

144631689
16380263: RNCC: 3 | RNVC: 2
16380263: RNCC: 5 | RNVC: 9

26 May 1993

5120-14-515-0783
Sheet Metalworking Dolly Block

145150783
0290100601: RNCC: 3 | RNVC: 2
2901006: RNCC: 5 | RNVC: 2

2 Jul 1999

5120-14-326-4291
Electrical Card Extractor

143264291
476514: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-490-8902
Lame

144908902
4067 200 000 479: RNCC: 3 | RNVC: 2
F300 0T 000 5176: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-495-9836
Open End Wrench

144959836
380013: RNCC: 3 | RNVC: 2
RCS18795-3: RNCC: 5 | RNVC: 9
F300 0T 020 6797: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-320-0745
Embout-Cle A Fourch

143200745
D05: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-222-1513

5120-14-428-7930
Outil Maintien Inje

144287930
24545811800: RNCC: 3 | RNVC: 2
245458118: RNCC: 5 | RNVC: 9

21 Dec 1988

5120-14-365-1613

5120-14-348-0072
Alene Ronde Manche

143480072
931-3: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-521-0558
Flat Tip Screwdriver

145210558
ACH.5,5X400: RNCC: 3 | RNVC: 2

5 Jul 2000

5120-14-516-5311
Open End Wrench

145165311
20.5/8: RNCC: 3 | RNVC: 2

29 Sep 1999

5120-14-337-0922
Typewriter Repair Pliers

143370922
16402054-8: RNCC: 3 | RNVC: 2
HK1-115: RNCC: 5 | RNVC: 2
16401655: RNCC: 5 | RNVC: 2
16401655-7: RNCC: 5 | RNVC: 2
175-4A16402054: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-298-1280
Lampe A Souder Gaz

142981280
NO PRIMARY REF14-298-1280: RNCC: 3 | RNVC: 2
M15-5463: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-042-3580
Pre-Sertissage Bloc

140423580
RMPS6F20X1-2M: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-271-6083
Open End Wrench

142716083
69-42: RNCC: 3 | RNVC: 2
4062-42: RNCC: 3 | RNVC: 9
E74301C42WWF: RNCC: 5 | RNVC: 1
E74301C42BAF: RNCC: 5 | RNVC: 2
3272670305908: RNCC: 5 | RNVC: 2
BB101: RNCC: 5 | RNVC: 2
BB101-42: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-212-9105
Socket Wrench Handle

142129105
9970-115-024: RNCC: 3 | RNVC: 2
9970-115-024-00: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-456-3083
Open End Wrench

144563083
32729: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-290-7686
Guide

142907686
2320-03659QIL340: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-355-6633
Spanner Wrench

143556633
53MA301025: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-303-6283
Socket Wrench Socket

143036283
1768-21: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-214-4936

5120-14-334-0439

5120-14-415-5605
Open End Wrench

144155605
10-22X24CP: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-532-2428
Socket Wrench Handle

145322428
JA160: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-437-9378
Torque Wrench Adapter

144379378
100959: RNCC: 3 | RNVC: 2
C63131: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-288-4175
Wrench Kit

142884175
8810060000: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-551-4708
Hydraulic Jack Handle

145514708
D17: RNCC: 3 | RNVC: 2

27 Sep 2006

5120-14-534-0876
Detent Handling Tool

145340876
713244P: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-306-2363
Flat Tip Screwdriver

143062363
AR6X150: RNCC: 3 | RNVC: 2
3599125: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-467-8126
Hand Tube Swaging Tool Kit

144678126
DLT40PSKT3000A: RNCC: 3 | RNVC: 2

27 Jan 1994

5120-14-545-9486
Open End Wrench

145459486
29122288-2: RNCC: 3 | RNVC: 2

30 May 2005

5120-14-534-8183
Retaining Ring Pliers

145348183
167E.9: RNCC: 3 | RNVC: 2
0236962R00: RNCC: 5 | RNVC: 2

9 Apr 2003

5120-14-313-4555
Combination Box And Open End Wrench

143134555
ECHC87-1-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-379-0715
Mechanical Puller Attachment

143790715
365A93-3245-21: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-489-9591
Pliers

144899591
NO PRIMARY REF14-489-9591: RNCC: 3 | RNVC: 2
0172565: RNCC: 5 | RNVC: 2
3148511725658: RNCC: 5 | RNVC: 2
387.18EG: RNCC: 5 | RNVC: 2
FACOM 387-18EG: RNCC: 5 | RNVC: 2
958 217 000 001: RNCC: 6 | RNVC: 9

1 Sep 1997

5120-14-375-8402
Electrical Card Extractor

143758402
NO PRIMARY REF14-375-8402: RNCC: 3 | RNVC: 2
16624051: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-521-6370
Socket Head Screw Key

145216370
83H.2: RNCC: 3 | RNVC: 2
83H2: RNCC: 3 | RNVC: 2
83H-2: RNCC: 5 | RNVC: 2
8034260T00: RNCC: 5 | RNVC: 2
0715 31 17: RNCC: 5 | RNVC: 2
0124011: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-239-1175
Tournevis A Ressort

142391175
267-1: RNCC: 3 | RNVC: 2
3272670286467: RNCC: 5 | RNVC: 2
35-241: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-243-6590
Cle Pour Reglage Du

142436590
15416T03: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-506-7668
De Montage Outil

145067668
M13570: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-250-8023

5120-14-283-9737
Wrench Extension Handle

142839737
M3-093-20: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-281-5407
Serving Mallet

142815407
MAILLETA FOURRER/DIAM80MM: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-327-2403
Socket Head Screw Key

143272403
MS5: RNCC: 3 | RNVC: 2
85-686-9260: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-247-9633
Douille De Cle A Do

142479633
RT20930: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-353-9397
Embout Cle A Fourch

143539397
02640906000: RNCC: 3 | RNVC: 2
026409060: RNCC: 5 | RNVC: 2

16 Jan 1979

5120-14-550-8767
Socket Wrench Screwdriver Attachment

145508767
SV8B: RNCC: 3 | RNVC: 2

25 Jul 2006

5120-14-538-7935
Spanner Wrench

145387935
NGM0011040420021: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-422-9383

5120-14-522-2440
Bearing And Bushing Inserter

145222440
TC3042G001: RNCC: 3 | RNVC: 2
8815279000: RNCC: 5 | RNVC: 2

11 Oct 2000

5120-14-460-8404
Bearing And Bushing Inserter And Remover

144608404
45057894: RNCC: 3 | RNVC: 2
45057894: RNCC: 5 | RNVC: 9

10 Feb 1993

5120-14-267-2115

5120-14-346-0365
Flat Tip Screwdriver

143460365
249-4: RNCC: 3 | RNVC: 2
3272670278745: RNCC: 5 | RNVC: 2
SYQ5214: RNCC: 5 | RNVC: 2

5 Nov 1977

5120-14-551-2488
Combination Box And Open End Wrench

145512488
30-5: RNCC: 3 | RNVC: 2
30.5: RNCC: 3 | RNVC: 2

7 Sep 2006

5120-14-522-4173
Socket Wrench Handle

145224173
K.130: RNCC: 3 | RNVC: 2
3148510307251: RNCC: 5 | RNVC: 2
K130: RNCC: 5 | RNVC: 2
0030725: RNCC: 5 | RNVC: 9

30 Oct 2000

5120-14-511-3011
Hand Terminal Crimping Tool

145113011
452.6: RNCC: 3 | RNVC: 2
3148511767870: RNCC: 5 | RNVC: 2
SYB1377: RNCC: 5 | RNVC: 2

14 Dec 1998

5120-14-386-1545
Maintien Btp Outil

143861545
6801J32-1067-20: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-318-6207
Spanner Wrench

143186207
C46352: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-427-1488
Socket Head Screw Key

144271488
6252-54293: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-343-1872
Centreur Bague Vis

143431872
205238: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-283-1395

5120-14-333-8086

5120-14-333-3889

5120-14-490-6999
Wrench

144906999
241 W 03332 125: RNCC: 3 | RNVC: 2
F300 0T 000 1187: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-493-0695
Cle

144930695
NO PRIMARY REF14-493-0695: RNCC: 3 | RNVC: 2
1909-19-02: RNCC: 5 | RNVC: 9
F300 0T 009 8677: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-393-8851
Outillage Entonnoir

143938851
NO PRIMARY REF14-393-8851: RNCC: 3 | RNVC: 2
OU138034: RNCC: 5 | RNVC: 9

23 Jun 1984

5120-14-288-1864

5120-14-359-3101
Plaque Positionneme

143593101
3443-9: RNCC: 3 | RNVC: 2

2 Oct 1979

5120-14-368-0574
Bague Monte Roulemt

143680574
24145040100: RNCC: 3 | RNVC: 2
241450401: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-220-8425

5120-14-462-9367
Pince Speciale

144629367
50092063: RNCC: 3 | RNVC: 2

7 May 1993

5120-14-202-0406

5120-14-570-6074
Open End Wrench

145706074
62026362AA: RNCC: 3 | RNVC: 2

10 Jan 2012

5120-14-441-2268
Bearing And Bushing Inserter And Remover

144412268
6802V32-3214-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-468-3656
Retaining Ring Pliers

144683656
NO PRIMARY REF14-468-3656: RNCC: 3 | RNVC: 2
0139430: RNCC: 5 | RNVC: 2
167.18: RNCC: 5 | RNVC: 2
1049229P00: RNCC: 5 | RNVC: 2

23 Feb 1994

5120-14-510-7711
Socket Wrench Socket

145107711
F97-025-2-01900: RNCC: 3 | RNVC: 2

12 Nov 1998

5120-14-557-7722
Spanner Wrench

145577722
332A93-3232-01: RNCC: 3 | RNVC: 2

9 Jul 2008

5120-14-382-8667
Detent Handling Tool

143828667
8810964000: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-283-1398
Demi-Collier

142831398
T0120BBC13APL5: RNCC: 3 | RNVC: 2
403735T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-380-4709
Gabarit Amovible

143804709
535080: RNCC: 3 | RNVC: 2
00535080: RNCC: 5 | RNVC: 2

29 Nov 1982

5120-14-380-8397
Extracteur

143808397
PR47665: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-283-1407

5120-14-371-7592

5120-14-383-6535
Spanner Wrench

143836535
S16-0656-0560: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-358-6832
Vise Jaw Caps

143586832
701934-00: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-427-6944
Flat Tip Screwdriver

144276944
NO PRIMARY REF14-427-6944: RNCC: 3 | RNVC: 2
542200: RNCC: 5 | RNVC: 9
97565125: RNCC: 5 | RNVC: 9

4 Nov 1988

5120-14-348-5108
Outi Regl Vann Elem

143485108
NO PRIMARY REF14-348-5108: RNCC: 3 | RNVC: 2
RT9146C2: RNCC: 5 | RNVC: 9

29 Mar 1978

5120-14-348-3412
Handicraft Snap Fastener Setter

143483412
JEUDEP0SECHEK23: RNCC: 3 | RNVC: 2
85-644-4290: RNCC: 6 | RNVC: 9

29 Mar 1978

5120-14-343-6372
Universal Puller Kit

143436372
330A93-2030-00: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-232-3523
Open End Wrench

142323523
E74-301-24: RNCC: 2 | RNVC: 2
69-24: RNCC: 3 | RNVC: 2
3272670213357: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-232-3524
Open End Wrench

142323524
E74-301-30: RNCC: 2 | RNVC: 2
69-30: RNCC: 3 | RNVC: 2
3272670240988: RNCC: 5 | RNVC: 2
1029208W00: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-442-5372
Open End Wrench

144425372
D1553-8024: RNCC: 3 | RNVC: 2
D1553-8024: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-031-9145
Open End Wrench

140319145
NOREF140319145: RNCC: 3 | RNVC: 2
44-32X35: RNCC: 5 | RNVC: 2
190196: RNCC: 5 | RNVC: 2
0197319E00: RNCC: 5 | RNVC: 2
91463587: RNCC: 5 | RNVC: 2
0102478: RNCC: 5 | RNVC: 2
44.32X35: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-206-8069
Hand Material Handling Hook

142068069
NO PRIMARY REF14-206-8069: RNCC: 3 | RNVC: 2
VFE5-512: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-450-7492
Cross Tip Screwdriver

144507492
NO PRIMARY REF14-450-7492: RNCC: 3 | RNVC: 2
EBPH2.6X30: RNCC: 5 | RNVC: 9
646100: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-359-6705
Montage Pignon Cle

143596705
L5304REF1-6: RNCC: 3 | RNVC: 2
L5304REF1-6: RNCC: 5 | RNVC: 9

15 Oct 1979

5120-14-427-6435
Socket Wrench Extension

144276435
R.211: RNCC: 3 | RNVC: 2
3148510526102: RNCC: 5 | RNVC: 2
0243383Q00: RNCC: 5 | RNVC: 2
R211: RNCC: 5 | RNVC: 2
0052610: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-377-3706
Sertisseuse A Levie

143773706
23510200000: RNCC: 3 | RNVC: 2
ZH305: RNCC: 5 | RNVC: 2

17 May 1982

5120-14-392-1753
Electrical Card Extractor

143921753
23119819-6: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-261-0138

5120-14-328-1269

5120-14-486-5716
Cle

144865716
RT22439: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-490-8897
Crattoi

144908897
4067 180 000 473: RNCC: 3 | RNVC: 2
F300 0T 000 5170: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-416-7656
Mandrin Presse

144167656
540630: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-565-1925
Combination Box And Open End Wrench

145651925
440.32: RNCC: 3 | RNVC: 2
768183: RNCC: 5 | RNVC: 2

22 Jul 2010

5120-14-385-3329
Mechanical Puller Attachment

143853329
365A93-3101-21: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-513-9796
Open End Wrench

145139796
ENFD29159-5-5X7: RNCC: 3 | RNVC: 2

21 Apr 1999

5120-14-334-8050
Socket Wrench Socket

143348050
0051200: RNCC: 3 | RNVC: 2
R.3,2L: RNCC: 5 | RNVC: 2
R3-2L: RNCC: 5 | RNVC: 2

2 Jun 1976

5120-14-420-9554
Hand Tube Belling Punch

144209554
NO PRIMARY REF14-420-9554: RNCC: 3 | RNVC: 2
243.A3/8: RNCC: 5 | RNVC: 2

6 Jan 1988

5120-14-549-6151
Socket Wrench Screwdriver Attachment

145496151
D.107-10: RNCC: 3 | RNVC: 2

21 Apr 2006

5120-14-539-2674
Electronic Component Inserter And Remover

145392674
275751608-00: RNCC: 3 | RNVC: 2
27575160-8: RNCC: 5 | RNVC: 2

17 Dec 2003

5120-14-466-2641
Spanner Wrench

144662641
851-200-078-0: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-357-9989
Essais Support

143579989
MKM0435000: RNCC: 3 | RNVC: 2
MKM0435000: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-324-2127
Piton De Demontage

143242127
065-30-9003REP4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-270-8697

5120-14-456-7152
Sheet Metalworking Dolly Block

144567152
853-930-102-6: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-272-7579
Spanner Wrench

142727579
D1553-4808: RNCC: 3 | RNVC: 2
D1553-4808: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-269-5230
Spanner Wrench

142695230
D1512-2203: RNCC: 3 | RNVC: 2
D1512-2203: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-536-5287
Combination Box And Open End Wrench

145365287
40R.1/2: RNCC: 3 | RNVC: 2
3148511012017: RNCC: 5 | RNVC: 2

28 Aug 2003

5120-14-488-8726
Torque Wrench Adapter

144888726
SDP.24: RNCC: 3 | RNVC: 2
SDP24: RNCC: 5 | RNVC: 2

11 Jun 1997

5120-14-426-6794
De Positionne Outil

144266794
0104508: RNCC: 3 | RNVC: 2

15 Sep 1988

5120-14-267-1507

5120-14-557-2686
Spanner Wrench

145572686
8811290007: RNCC: 3 | RNVC: 2

29 May 2008

5120-14-439-7468

5120-14-443-9333

5120-14-443-9346

5120-14-462-2106
Indicateur Position

144622106
206926B: RNCC: 3 | RNVC: 2
400795REP1: RNCC: 5 | RNVC: 2

15 Apr 1993

5120-14-233-4349

5120-14-399-9094
Regleur De Vitesse

143999094
PWRA1268: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-308-3357

5120-14-420-7170
Pince Cloche Specia

144207170
6511-50136: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-373-6046
Spanner Wrench

143736046
0468-01: RNCC: 3 | RNVC: 2
BGE000437: RNCC: 5 | RNVC: 2

13 Nov 1981

5120-14-295-2837
Rondelle Dappui

142952837
D1553-4981: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-227-3436

5120-14-285-0371

5120-14-314-3581

5120-14-423-2324
Basculeur Cle Dyn

144232324
SP2085D-3-500: RNCC: 3 | RNVC: 2

14 Apr 1988

5120-14-567-4167
Lamp Cap Extractor

145674167
0UT83: RNCC: 3 | RNVC: 2
OUT83: RNCC: 5 | RNVC: 2

15 Mar 2011

5120-14-365-1639
Centreur Embrayage

143651639
0000331501: RNCC: 3 | RNVC: 2
0000331501: RNCC: 5 | RNVC: 9
331501: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-041-8720
Trousse Equipee Dun

140418720
16500614: RNCC: 3 | RNVC: 2
16500614: RNCC: 5 | RNVC: 2
16500614: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-416-7514
Maintien Outil

144167514
537279: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-444-3491
Socket Wrench Socket

144443491
GS86-04: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-505-9257
Flat Tip Screwdriver

145059257
ENFD6514-A0-5X3X50X135: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-384-3357
Screwdriver Bit

143843357
SDM211: RNCC: 3 | RNVC: 2
SDM211: RNCC: 5 | RNVC: 2
85-692-4489: RNCC: 6 | RNVC: 9

4 May 1983

5120-14-355-4018
Socket Head Screw Key

143554018
27323122-3: RNCC: 3 | RNVC: 2
16491456: RNCC: 5 | RNVC: 2

19 Mar 1979

5120-14-576-6140
Mechanical Puller S

145766140
8810572103: RNCC: 3 | RNVC: 2

1 Jul 2013

5120-14-380-8388
Mise En Forme Bague

143808388
D46057: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-352-3205
Bouchon Pour Extrac

143523205
0M458-17-1: RNCC: 3 | RNVC: 2
0M458-17-1: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-225-5600
Cle Pour Corps De P

142255600
31225A: RNCC: 3 | RNVC: 2
31225: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-454-3515
Socket Wrench Socket Set

144543515
S.300-4: RNCC: 3 | RNVC: 2
3148515148606: RNCC: 5 | RNVC: 2
91729315: RNCC: 5 | RNVC: 2
0514860: RNCC: 5 | RNVC: 9

1 Apr 1992

5120-14-463-8829
Hand Sheet Metal Seamer

144638829
703A93-0310-00: RNCC: 3 | RNVC: 2
85-695-0058: RNCC: 6 | RNVC: 9

30 Jun 1993

5120-14-276-3117
Socket Wrench Socket

142763117
S12: RNCC: 3 | RNVC: 2
65L12-12PANS: RNCC: 5 | RNVC: 2
91587900: RNCC: 5 | RNVC: 2
130350: RNCC: 5 | RNVC: 2
3148510535401: RNCC: 5 | RNVC: 2
S12: RNCC: 5 | RNVC: 2
3272670271968: RNCC: 5 | RNVC: 2
75S12: RNCC: 5 | RNVC: 9
S12: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-332-5594
Bearing And Bushing Inserter And Remover

143325594
3160S95-63-053: RNCC: 3 | RNVC: 2
85-100-3210: RNCC: 6 | RNVC: 9

2 Jul 1975

5120-14-540-9858
Socket Wrench Adapter-Extension

145409858
6503POC100007: RNCC: 3 | RNVC: 2

5 May 2004

5120-14-276-3140
Socket Wrench Socket

142763140
C30: RNCC: 3 | RNVC: 2
K30: RNCC: 3 | RNVC: 2
C-30: RNCC: 3 | RNVC: 2
K30: RNCC: 3 | RNVC: 9
3272670290914: RNCC: 5 | RNVC: 2
DEMK30: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-278-0780
Drift And Drive Set Punch Set

142780780
247.249JS12: RNCC: 3 | RNVC: 2
3148515389009: RNCC: 5 | RNVC: 2
247-249JS12: RNCC: 5 | RNVC: 2
0538900: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-349-5787
Cle Pour Diaphragme

143495787
5423J131: RNCC: 3 | RNVC: 2
85-689-1107: RNCC: 6 | RNVC: 9

22 May 1978

5120-14-237-4732
Cle Pour Ecrou Spec

142374732
3130-98-04-025: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-385-3421
Spanner Wrench

143853421
6802P32-6003-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-400-9201
Daxe Extracteur

144009201
M31-153: RNCC: 3 | RNVC: 2

21 May 1985

5120-14-400-1930
Bearing And Bushing Inserter

144001930
330A93-2057-00: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-577-8085
Pliers

145778085
2T93199-00: RNCC: 3 | RNVC: 2

10 Oct 2013

5120-14-237-4727
Cle Pour Vis De Blo

142374727
3130-98-02-007: RNCC: 3 | RNVC: 2
3130S98-02-007: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-216-5163
Socket Head Screw Key

142165163
0127760: RNCC: 3 | RNVC: 2
62-3/4: RNCC: 3 | RNVC: 2
62 3-4: RNCC: 3 | RNVC: 2
3272670260184: RNCC: 5 | RNVC: 2
82-3-4: RNCC: 5 | RNVC: 2
82.3/4: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-510-6878
Spanner Wrench

145106878
PB.MOD40-2: RNCC: 3 | RNVC: 2

4 Nov 1998

5120-14-468-0209
Socket Wrench Adapter

144680209
7-000126-2: RNCC: 3 | RNVC: 2
7-000126-2: RNCC: 5 | RNVC: 9

8 Feb 1994

5120-14-528-9029
Socket Head Screw Key

145289029
84TZS.6: RNCC: 3 | RNVC: 2
3148511257241: RNCC: 5 | RNVC: 2

20 Feb 2002

5120-14-210-9869
Socket Wrench Extension

142109869
J.210: RNCC: 3 | RNVC: 2
J210: RNCC: 5 | RNVC: 2
0713 128 105: RNCC: 5 | RNVC: 2
J.210: RNCC: 5 | RNVC: 2
CAE00918: RNCC: 5 | RNVC: 2
3148510289007: RNCC: 5 | RNVC: 2
0222168B00: RNCC: 5 | RNVC: 2
91634279: RNCC: 5 | RNVC: 2
0028900: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-424-3485
Socket Wrench Socket

144243485
K.35A: RNCC: 3 | RNVC: 2
K35A: RNCC: 5 | RNVC: 2
3148510293356: RNCC: 5 | RNVC: 2
91629360: RNCC: 5 | RNVC: 2
1068339K00: RNCC: 5 | RNVC: 2
0029335: RNCC: 5 | RNVC: 9

19 May 1988

5120-14-263-2673

5120-14-222-1457

5120-14-541-3760
Open End Wrench

145413760
344162220: RNCC: 3 | RNVC: 2

3 Jun 2004

5120-14-031-6869

5120-14-470-3503
Cross Tip Screwdriver

144703503
180/6: RNCC: 3 | RNVC: 2
91602993: RNCC: 5 | RNVC: 2

15 Jun 1994

5120-14-409-3013
Fourche Equipee

144093013
300648-0: RNCC: 3 | RNVC: 2

26 May 1986

5120-14-411-8607
Combination Box And Open End Wrench Set

144118607
40.JN8T: RNCC: 3 | RNVC: 2
3148515285806: RNCC: 5 | RNVC: 2
40JN8T: RNCC: 5 | RNVC: 2
0528580: RNCC: 5 | RNVC: 9

10 Sep 1986

5120-14-329-6325
Open End Wrench

143296325
M31-045: RNCC: 3 | RNVC: 2
M31-045: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-220-5163
Cle Speciale

142205163
3160-95-42-008: RNCC: 3 | RNVC: 2
3160S95-42-008: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-316-7058
Sertisseur Ppe Main

143167058
G1-1436: RNCC: 3 | RNVC: 2
85-689-0045: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-459-6470
Cle Speciale

144596470
312-00016-015-W26H2: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-228-5123

5120-14-490-8994
Pinces

144908994
4071 111 611 606: RNCC: 3 | RNVC: 2
F300 0T 000 5291: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-307-1095
Cle Oculaire

143071095
0392-1080: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-275-1690
Outil De Poinconnag

142751690
3CGF77: RNCC: 3 | RNVC: 2
3CGF77: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-414-8336
Outillage

144148336
035-42961-0: RNCC: 3 | RNVC: 9

12 Mar 1987

5120-14-317-0713
Access Chasse-Joint

143170713
0-74361-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-238-5475
Tap And Reamer Wrench

142385475
E66130 N4: RNCC: 2 | RNVC: 2
3047-3: RNCC: 3 | RNVC: 9
5120AAGN4: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-444-9151
Open End Wrench

144449151
2-10-44: RNCC: 3 | RNVC: 2
0110767W00: RNCC: 5 | RNVC: 2

28 Jan 1991

5120-14-212-9161
Cle A Carre Pour Ec

142129161
9970-115-028: RNCC: 3 | RNVC: 2
9970-115-028-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-455-2186
Butee Pr Pince Sert

144552186
057-0503-21: RNCC: 3 | RNVC: 2
TH18: RNCC: 5 | RNVC: 2

12 May 1992

5120-14-361-9438
Extracteur De Modul

143619438
567169: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-346-1325
Spanner Wrench

143461325
NO PRIMARY REF14-346-1325: RNCC: 3 | RNVC: 2
24018010: RNCC: 5 | RNVC: 9
1186-100: RNCC: 5 | RNVC: 9
240180103508: RNCC: 5 | RNVC: 9
7590: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-447-3418
Combination Box And Open End Wrench

144473418
39.9: RNCC: 3 | RNVC: 2
3148510998749: RNCC: 5 | RNVC: 2
39-9: RNCC: 5 | RNVC: 2
91714507: RNCC: 5 | RNVC: 2
0099874: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-442-2914
Spanner Wrench

144422914
62.01-FV130-5: RNCC: 3 | RNVC: 2

9 Oct 1990

5120-14-253-9426
Tournevis Special G

142539426
A37008: RNCC: 3 | RNVC: 2
A37008: RNCC: 3 | RNVC: 2
STD1170: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-227-4623
Pince A Sertir Pour

142274623
46223: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-229-3675
Cle A Oeil

142293675
NARI: RNCC: 3 | RNVC: 2
UNK: RNCC: 3 | RNVC: 2
SS1118: RNCC: 3 | RNVC: 2
ZINUNK: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-267-4508
Matrice Pour Pince

142674508
69205-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-338-4771
Faux Mor Demi-Coqui

143384771
C46403-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-412-0750
Appui Butee D

144120750
NO PRIMARY REF14-412-0750: RNCC: 3 | RNVC: 2
HZTL415081R1: RNCC: 5 | RNVC: 9

30 Sep 1986

5120-14-402-7158
Embout Specifique

144027158
65-7-01-044LT00-554726C: RNCC: 3 | RNVC: 2
0416220G00: RNCC: 5 | RNVC: 2

19 Jul 1985

5120-14-369-4855
Emmanche Joints

143694855
851-500-467-0: RNCC: 3 | RNVC: 2

17 Apr 1981

5120-14-446-3129
Arretoir Axial

144463129
VTR401-2-1083: RNCC: 3 | RNVC: 2

13 Mar 1991

5120-14-314-4904
Support Rodage Soup

143144904
M2D60972: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-451-7771
Bearing And Bushing Inserter And Remover

144517771
600032: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-530-7135
Cross Tip Screwdriver

145307135
13414: RNCC: 3 | RNVC: 2
3148510134147: RNCC: 5 | RNVC: 2
AZDB.1X25: RNCC: 5 | RNVC: 2

3 Jul 2002

5120-14-314-9114
Open End Wrench

143149114
M2-060-8: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-458-8551
Hand Rivet Set Assortment

144588551
853-600-185-6: RNCC: 3 | RNVC: 2

5 Nov 1992

5120-14-446-6589
Socket Wrench Socket

144466589
853-190-035-0: RNCC: 3 | RNVC: 2

9 Apr 1991

5120-14-483-1206
Open End Wrench

144831206
18.9/16: RNCC: 3 | RNVC: 2
3148510933917: RNCC: 5 | RNVC: 2
0099391: RNCC: 5 | RNVC: 9
093391: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-273-7059
Spanner Wrench

142737059
NR940-05-8: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-490-9478
Rallong

144909478
4280 172 000 013: RNCC: 3 | RNVC: 2
F300 0T 000 7214: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-343-8372

5120-14-228-0084

5120-14-236-2619

5120-14-404-0343
Spanner Wrench

144040343
9970-115-723: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-222-7391
Open End Wrench

142227391
20S9X8: RNCC: 3 | RNVC: 2
19-9X8: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-362-6811
Cross Tip Screwdriver

143626811
9970-121-234: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-324-1923
Outil A Emmancher L

143241923
7-010286-4: RNCC: 3 | RNVC: 2
RAB2168: RNCC: 5 | RNVC: 2
0UT2428: RNCC: 5 | RNVC: 9
7-010286-4: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-378-8443
Controle Bague

143788443
UJD232-46: RNCC: 3 | RNVC: 2
UJD232-46: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-220-9401
Wrench Extension Handle

142209401
8120MM: RNCC: 3 | RNVC: 2
RT20651: RNCC: 5 | RNVC: 2
M5-011: RNCC: 5 | RNVC: 2
9970-115-002: RNCC: 5 | RNVC: 2
2501-96-14075: RNCC: 5 | RNVC: 2
170-154: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-210-9879
Open End Wrench

142109879
33-28X30: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-279-1566
Spanner Wrench

142791566
D1512-748: RNCC: 3 | RNVC: 2
D1512-748: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-251-8737
Open End Wrench

142518737
CNM69-33: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-467-2891
Montage Palier Av

144672891
NO PRIMARY REF14-467-2891: RNCC: 3 | RNVC: 2
601668: RNCC: 5 | RNVC: 9

3 Jan 1994

5120-14-389-7584
Sertissage Poincon

143897584
483346-1: RNCC: 3 | RNVC: 2
85-692-4513: RNCC: 6 | RNVC: 9

20 Dec 1983

5120-14-207-4912

5120-14-491-8559
Cle

144918559
416360482111: RNCC: 3 | RNVC: 2
F300 0T 005 1361: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-506-0616
A Douille Cle

5120-14-415-5685
Cle Serrage Verin

5120-14-373-6753
Outil Demmanchement

143736753
152924: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-373-6739
Mandrin De Montage

143736739
218343: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-432-7925
Accessoire Rangemen

144327925
0341630: RNCC: 3 | RNVC: 2
CKS.80: RNCC: 5 | RNVC: 2
CKS80: RNCC: 5 | RNVC: 2

27 Jun 1989

5120-14-316-5882
Outil Pose Crochet

143165882
584282: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-285-4607

5120-14-261-5288
Tete Cle A Fourche

142615288
D20: RNCC: 3 | RNVC: 2
D20: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-394-3892
Spanner Wrench

143943892
C46353-1: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-337-5386
Embout A Carre

143375386
0057200: RNCC: 3 | RNVC: 2
S.200E: RNCC: 5 | RNVC: 2
S200E: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-392-0507
De Montage Obus

143920507
MGF449-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-292-8635
Boite Composition M

142928635
0508980: RNCC: 3 | RNVC: 2
205966: RNCC: 5 | RNVC: 2
M.421E: RNCC: 5 | RNVC: 2
M421E: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-375-0526
Cle A Panier

143750526
GSM196-010F10: RNCC: 3 | RNVC: 2

30 Jan 1982

5120-14-384-7364
Electrical Card Extractor

143847364
NO PRIMARY REF14-384-7364: RNCC: 3 | RNVC: 2
16931901: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-352-3145
Drift

143523145
MGA356-21: RNCC: 3 | RNVC: 2
MGA356-21: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-459-6482
Cle Speciale

144596482
312-03648-001-W26H: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-224-8045
Open End Wrench

142248045
18-13-64X15-64-15ET60DEGRES: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-488-3120
Socket Head Screw Key

144883120
82H.7/32: RNCC: 3 | RNVC: 2
0123581: RNCC: 5 | RNVC: 2
3148511235812: RNCC: 5 | RNVC: 2
82H7-32: RNCC: 5 | RNVC: 2
0715 311 33: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-212-9159
Cle A Carre Pour Ec

142129159
9970-115-025: RNCC: 3 | RNVC: 2
9970-115-025-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-370-6290
Outil Positionnemen

143706290
6202E11-0000-00: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-426-3434
Anneau De Demontage

144263434
1G4140-13: RNCC: 3 | RNVC: 9
1G4135B-REP13: RNCC: 5 | RNVC: 9

24 Aug 1988

5120-14-568-5040
Face Spanner Wrench Socket

145685040
65200M531150710: RNCC: 3 | RNVC: 2
65200M531150710: RNCC: 5 | RNVC: 2

8 Jun 2011

5120-14-358-6463
Sabo Broche Verouil

143586463
MS1425-10-04: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-444-3194
Combination Box And Open End Box Wrench

144443194
GS130-02: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-311-4544
Face Spanner Wrench Socket

143114544
3160S95-42-008-1: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-575-3822
Bearing Installation Tool Base

145753822
43.300.226: RNCC: 3 | RNVC: 2
43300226: RNCC: 5 | RNVC: 2

2 Apr 2013

5120-14-255-6580

5120-14-311-4958
Outil Reglage Cames

143114958
879-2: RNCC: 3 | RNVC: 2
879TYPE2: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-382-7668
Outil Mise En Oeuvr

143827668
3CGF152-3: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-412-3212
Spanner Wrench

144123212
46AM090: RNCC: 3 | RNVC: 2

8 Oct 1986

5120-14-536-4329
Bearing And Bushing Inserter And Remover

145364329
132556: RNCC: 3 | RNVC: 2

5 Aug 2003

5120-14-416-7486
Plateau Equipe

144167486
537124: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-214-1378
Detent Handling Tool

142141378
8810003013: RNCC: 3 | RNVC: 2
881-0-003-013: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-442-1930
Spanner Wrench

144421930
0855564R00: RNCC: 3 | RNVC: 2
85-694-3220: RNCC: 6 | RNVC: 9

3 Oct 1990

5120-14-290-3614
Pince Ote Oeillet

142903614
PINCE0TE0EILLET190MM: RNCC: 2 | RNVC: 2
NO PRIMARY REF14-290-3614: RNCC: 3 | RNVC: 2
PINCE0TE0EILLET190MM: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-241-1485
Adaptateur Special

142411485
0685-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-335-8085

5120-14-263-2696

5120-14-319-7262

5120-14-522-1034
Assemblees Cles

145221034
29659782: RNCC: 3 | RNVC: 2

4 Oct 2000

5120-14-562-0308
Mechanical Puller

145620308
7M957: RNCC: 3 | RNVC: 2

23 Sep 2009

5120-14-212-0500

5120-14-315-0652

5120-14-220-7879
Open End Wrench

142207879
71-54: RNCC: 3 | RNVC: 2
RACC54: RNCC: 5 | RNVC: 2
M1-023: RNCC: 5 | RNVC: 2
V2-95-559: RNCC: 5 | RNVC: 2
10A54: RNCC: 5 | RNVC: 2
71-54: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-226-6358
Electron Tube Pin Straightener

142266358
NO PRIMARY REF14-226-6358: RNCC: 3 | RNVC: 2
SCMTNT93CAL: RNCC: 5 | RNVC: 9
212: RNCC: 5 | RNVC: 9
NT93CAL: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-488-7456
Pince A Callot

144887456
1086071Q00: RNCC: 3 | RNVC: 2

28 May 1997

5120-14-443-3384
Ressort A Cintrer

144433384
2510122: RNCC: 3 | RNVC: 2

16 Nov 1990

5120-14-532-9618
A Tete P Tournevis

145329618
AEF.1,5X35E: RNCC: 3 | RNVC: 2
3148510048802: RNCC: 5 | RNVC: 2

14 Jan 2003

5120-14-292-0776
Outillage Fraisage

142920776
NO PRIMARY REF14-292-0776: RNCC: 3 | RNVC: 2
145J102: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-458-3178
Cross Tip Screwdriver

144583178
1-15-130V: RNCC: 3 | RNVC: 2
85-694-9125: RNCC: 6 | RNVC: 9

15 Oct 1992

5120-14-479-0356
Socket Wrench Crowfoot Attachment

144790356
888-374-400-1: RNCC: 3 | RNVC: 2

6 Dec 1995

5120-14-415-0248
Outil Reglage Suppo

144150248
64-3-01-045G00-626318C: RNCC: 3 | RNVC: 2
045G00-414253T: RNCC: 5 | RNVC: 2
414253T: RNCC: 5 | RNVC: 2
91572555: RNCC: 5 | RNVC: 2
0414253T00: RNCC: 5 | RNVC: 2

26 Mar 1987

5120-14-485-3587
Outillage Extractio

144853587
02240902954: RNCC: 3 | RNVC: 2
308455-01: RNCC: 3 | RNVC: 2

17 Jan 1997

5120-14-558-4537
Electrical Contact Remover

145584537
8660-197: RNCC: 3 | RNVC: 2

6 Oct 2008

5120-14-248-7458
Cle Speciale

142487458
G1-15-182: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-385-3383
Support Roue Libre

143853383
365A93-3503-00: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-387-1708
Spanner Wrench

143871708
M31-077: RNCC: 3 | RNVC: 2
M31077: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-561-1793
Cross Tip Screwdriver

145611793
AWP1X100: RNCC: 3 | RNVC: 2
3148517742253: RNCC: 5 | RNVC: 2
774225: RNCC: 5 | RNVC: 2

23 Jun 2009

5120-14-348-8376
Faux Mors

143488376
D47699: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-256-7593

5120-14-294-9118

5120-14-436-1043
Protecteur Cone

144361043
716551: RNCC: 3 | RNVC: 2

5 Dec 1989

5120-14-490-8748
Cle

144908748
4065 030 001 110: RNCC: 3 | RNVC: 2
F300 0T 000 5004: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-212-9142

5120-14-212-9101
Manche Special Outi

142129101
9970-115-032: RNCC: 3 | RNVC: 2
9970-115-032-01: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-547-9865
Electrical Contact Remover

145479865
010UT512-1EE0-20: RNCC: 1 | RNVC: 2
00111222025: RNCC: 3 | RNVC: 1
8660-188: RNCC: 3 | RNVC: 2
91066-4: RNCC: 3 | RNVC: 2
282886: RNCC: 3 | RNVC: 2
CIET20-8: RNCC: 3 | RNVC: 2

30 Nov 2005

5120-14-485-4622
Wrench Extension Handle

144854622
888-408-100-1: RNCC: 3 | RNVC: 2

23 Jan 1997

5120-14-465-4733
Bearing And Bushing Remover

144654733
851-500-187-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-410-3681
Spanner Wrench

144103681
119-1/2: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-478-5832
Montage Cone

144785832
100-400-3: RNCC: 3 | RNVC: 2

8 Nov 1995

Load More Results