What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 71 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 71 of 110

5120-14-308-2200

5120-14-322-1338

5120-14-307-9577
Cle Carre Male

143079577
JGA12-27: RNCC: 3 | RNVC: 2
13050-24: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-285-4798
Pliers

142854798
1262-16P0PVC: RNCC: 3 | RNVC: 2
262-16P0-PVC: RNCC: 3 | RNVC: 2
262-16POPVC: RNCC: 3 | RNVC: 2
4247-16: RNCC: 3 | RNVC: 9
E73-140-160IS0LEBECL0NG: RNCC: 5 | RNVC: 1
262BF16: RNCC: 5 | RNVC: 2
1507-16: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-444-7587
Vis De Deblocage

144447587
NO PRIMARY REF14-444-7587: RNCC: 3 | RNVC: 2
VTR251-2P-5046: RNCC: 5 | RNVC: 9

21 Jan 1991

5120-14-457-8036
Electrical Contact Inserter

144578036
001136 201 60: RNCC: 3 | RNVC: 2
00113620160: RNCC: 5 | RNVC: 2
W47213931A: RNCC: 5 | RNVC: 2

24 Sep 1992

5120-14-284-1960
Stud Inserter And Remover

142841960
0165300: RNCC: 3 | RNVC: 2
286: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-384-6309
Electrical Card Extractor

143846309
16928961: RNCC: 3 | RNVC: 2
16928961: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-538-7862
Spanner Wrench

145387862
NGM0011040380102: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-297-1295
Spanner Wrench

142971295
9420J: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-417-0998
Socket Wrench Socket

144170998
523083: RNCC: 3 | RNVC: 2

1 Jul 1987

5120-14-340-9319
Vise Jaw Caps

143409319
C46088: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-552-7782
Flat Tip And Cross Tip Screwdriver Set

145527782
AY.J3: RNCC: 3 | RNVC: 2
AY.J3: RNCC: 5 | RNVC: 2
3148516338440: RNCC: 5 | RNVC: 2
AA023493: RNCC: 6 | RNVC: 9

31 Jan 2007

5120-14-411-6284
Spanner Wrench

144116284
71632: RNCC: 3 | RNVC: 2
00067716: RNCC: 5 | RNVC: 2

27 Aug 1986

5120-14-546-0248
Craftsman's Tweezers

145460248
157.Z2: RNCC: 3 | RNVC: 2

6 Jun 2005

5120-14-248-5723
Extracteur

142485723
202459: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-357-4325
Socket Head Screw Key

143574325
7395CLEDE2MM: RNCC: 3 | RNVC: 2
XCELITE99-73MM: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-523-1361
Spring Inserter And Remover

145231361
393-155: RNCC: 3 | RNVC: 2

8 Jan 2001

5120-14-542-5421
Hand Armament Subsystem Carrier

145425421
728434S000-00A: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-466-7455
Socket Wrench Extension

144667455
3511 193 12051: RNCC: 3 | RNVC: 2
3511-193-12051: RNCC: 5 | RNVC: 2

24 Nov 1993

5120-14-385-3154
Mechanical Puller Attachment

143853154
360A93-3401-20: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-214-1849
Obus Femelle Montag

142141849
92549: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-489-4932
Support De Maintien

144894932
26-532: RNCC: 3 | RNVC: 2

28 Jul 1997

5120-14-558-4509
Adjustable Wrench

145584509
DELT70110: RNCC: 3 | RNVC: 2

3 Oct 2008

5120-14-568-1776
Combination Box And Open End Wrench

145681776
440.9: RNCC: 3 | RNVC: 2
3148517679658: RNCC: 5 | RNVC: 2
767965: RNCC: 5 | RNVC: 2

12 May 2011

5120-14-219-2203

5120-14-220-1279
Outil De Demontage

142201279
61963: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-419-6413

5120-14-406-6389
Joints Emmanche

144066389
0UT50096: RNCC: 3 | RNVC: 2
OUT50096: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-277-3494
Cle Brochee

142773494
8000362902: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-569-8666
Ratchet Wrench

145698666
65.PEJ13: RNCC: 3 | RNVC: 2
3148517627697: RNCC: 5 | RNVC: 2
762769: RNCC: 5 | RNVC: 2

25 Oct 2011

5120-14-314-8592
Fixed Open End Wrench Set

143148592
44JU12CP: RNCC: 3 | RNVC: 2
0529995: RNCC: 3 | RNVC: 2
44JU12: RNCC: 5 | RNVC: 2
3148515302909: RNCC: 5 | RNVC: 2
44.JU12: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-446-0566
Mechanical Puller Attachment

144460566
SV1233: RNCC: 3 | RNVC: 2
89409855: RNCC: 5 | RNVC: 2
5000261233: RNCC: 5 | RNVC: 2
SV1233: RNCC: 5 | RNVC: 9

5 Mar 1991

5120-14-274-8549
Spanner Wrench

142748549
E74323A50UJW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-272-5069
Lasting Pincers

142725069
434: RNCC: 3 | RNVC: 2
140CF502: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-400-2096

5120-14-236-6013

5120-14-225-5596
Extracteur De Coupe

142255596
41985: RNCC: 3 | RNVC: 2
41985A: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-429-3013
Screw Thread Insert Inserter

144293013
01500224400: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-271-8444

5120-14-415-4430
Socket Wrench Attachment Universal Joint

144154430
M4Z6021000401: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-524-7326
Detent Handling Tool

145247326
M18460: RNCC: 3 | RNVC: 2

10 Apr 2001

5120-14-031-9130
Socket Wrench Adapter

140319130
NS210: RNCC: 3 | RNVC: 2
3148510431604: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-247-1335
Spanner Wrench

142471335
H90R1009PL1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-421-6394
Connecte Extracteur

144216394
3511 101 48681: RNCC: 3 | RNVC: 2
3511-101-48681: RNCC: 5 | RNVC: 2

20 Jan 1988

5120-14-317-7947
Piston Outillage

143177947
NO PRIMARY REF14-317-7947: RNCC: 3 | RNVC: 2
800481-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-300-9459
Outil Reglage Mrp

143009459
341A94-2730-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-442-1559
Blacksmith's Top Swage

144421559
853-930-048-0: RNCC: 3 | RNVC: 2

3 Oct 1990

5120-14-214-9315
Outil A Former Spec

142149315
60290-01-22-060M1: RNCC: 3 | RNVC: 2
9970-143-086: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-411-2127
Wrench Kit

144112127
121-944-00W26H: RNCC: 3 | RNVC: 2
85-692-0023: RNCC: 6 | RNVC: 9

6 Aug 1986

5120-14-332-8868
Spanner Wrench

143328868
50483: RNCC: 3 | RNVC: 2
50483: RNCC: 5 | RNVC: 2
6511-50483: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-363-0004
Open End Wrench

143630004
185807: RNCC: 3 | RNVC: 2

3 Apr 1980

5120-14-516-8070
Poussoir

145168070
5001009862: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-268-1395
Cle A Creneaux

142681395
PR46439: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-260-2319
Outillage De Mise E

142602319
MS674: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-561-9647
Detent Release Tool

145619647
8059188T00: RNCC: 3 | RNVC: 2

21 Sep 2009

5120-14-490-8826
Marteau

144908826
4066 313 000 002: RNCC: 3 | RNVC: 2
F300 0T 000 5098: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-380-8920

5120-14-432-1224
Socket Wrench Socket

144321224
853-190-029-0: RNCC: 3 | RNVC: 2

24 May 1989

5120-14-557-9890
Hand Hydraulic Jack

145579890
N-60524-16: RNCC: 3 | RNVC: 2
CV157839: RNCC: 5 | RNVC: 2
N6052416: RNCC: 5 | RNVC: 2

13 Aug 2008

5120-14-416-1218
Slip Joint Pliers

144161218
901CP-240: RNCC: 3 | RNVC: 9
877C: RNCC: 5 | RNVC: 9
DEM901CP-240: RNCC: 5 | RNVC: 9

3 Jun 1987

5120-14-438-5065
Face Spanner Wrench Socket

144385065
J47997: RNCC: 3 | RNVC: 2
85-694-0782: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-316-5716
Outil Degommage

143165716
M2073: RNCC: 3 | RNVC: 2
M2-073: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-557-1866
Socket Wrench Socket

145571866
RHC-11: RNCC: 3 | RNVC: 2

23 May 2008

5120-14-430-0856
Bague Filetee Cle

144300856
6814-58788: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-427-1445
Pliers

144271445
6252-59101: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-518-0240
Six Point Tip Screwdriver

145180240
ENFD6576-30X135: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-246-7007

5120-14-247-5683
Appareil De Demonta

142475683
643210: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-377-8008
Rallonge Verouillag

143778008
269419: RNCC: 3 | RNVC: 2
269419: RNCC: 5 | RNVC: 9

10 Jun 1982

5120-14-336-0752

5120-14-337-5389
Secteur De Serrage

143375389
0057120: RNCC: 3 | RNVC: 2
S.200B: RNCC: 5 | RNVC: 2
S200B: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-248-5657
Porte Cle

142485657
GSM196-021REP2: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-436-0223
Preformed Packing Inserter

144360223
807620: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-456-5032
Spanner Wrench

144565032
94AM066A: RNCC: 3 | RNVC: 2

7 Jul 1992

5120-14-431-7857
Socket Head Screw Key

144317857
0453-6089919: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-522-3830
Bearing Staking Installation Tool

145223830
TC3121G001: RNCC: 3 | RNVC: 2
8816380000: RNCC: 5 | RNVC: 2

25 Oct 2000

5120-14-418-7979
Face Spanner Wrench Socket

144187979
50AM019: RNCC: 3 | RNVC: 2

16 Sep 1987

5120-14-426-7301
Open End Wrench

144267301
E74301C40WWF: RNCC: 2 | RNVC: 2

17 Sep 1988

5120-14-486-5672
Montage

144865672
RT21773: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-233-4336

5120-14-444-9198
Flat Tip Screwdriver

144449198
AGH.14X250: RNCC: 3 | RNVC: 2
3148510058702: RNCC: 5 | RNVC: 2
1022542A00: RNCC: 5 | RNVC: 2
0005870: RNCC: 5 | RNVC: 9

28 Jan 1991

5120-14-401-0207
Spanner Wrench

144010207
593030: RNCC: 3 | RNVC: 2
92E0185: RNCC: 5 | RNVC: 2

21 May 1985

5120-14-534-8827
Furnace And Flue Wire Brush

145348827
701M10: RNCC: 3 | RNVC: 2
CAE01465: RNCC: 5 | RNVC: 2

11 Apr 2003

5120-14-387-8646
Spanner Wrench

143878646
OU50415: RNCC: 3 | RNVC: 2
50415: RNCC: 3 | RNVC: 2
0U50415: RNCC: 5 | RNVC: 2
50415: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-373-4960
Pliers

143734960
446885: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-466-5397
Detent Handling Tool

144665397
20325827: RNCC: 3 | RNVC: 2
20325827: RNCC: 5 | RNVC: 9

15 Nov 1993

5120-14-534-3252
Socket Head Screw Key

145343252
NNM0011040354328: RNCC: 2 | RNVC: 2

19 Mar 2003

5120-14-486-3273
Torque Wrench Adapter

144863273
SP.6114: RNCC: 3 | RNVC: 2
11.29: RNCC: 5 | RNVC: 2

12 Mar 1997

5120-14-254-5154
Open End Wrench

142545154
PAX: RNCC: 3 | RNVC: 2
ZINPAX: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-408-7399
Equipe Rupteur

144087399
01585090000: RNCC: 3 | RNVC: 2

2 Apr 1986

5120-14-483-6159
Fraise Poussant D-1

144836159
9-33-09-24-130: RNCC: 3 | RNVC: 2

24 Sep 1996

5120-14-514-3589
Tire Bourre

145143589
NO PRIMARY REF14-514-3589: RNCC: 3 | RNVC: 2
41T3303-18-5/8: RNCC: 5 | RNVC: 2
NNP5120860757256: RNCC: 5 | RNVC: 2
41T3303-18-5/8: RNCC: 5 | RNVC: 9

12 May 1999

5120-14-293-0699
Spanner Wrench

142930699
6800-0007: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-204-9173

5120-14-297-4800

5120-14-425-9319
Socket Head Screw Key

144259319
600302: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-393-4116
Socket Head Screw Key

143934116
80-10: RNCC: 3 | RNVC: 2
61-M10: RNCC: 3 | RNVC: 2
61.M10: RNCC: 3 | RNVC: 2
3148511220504: RNCC: 5 | RNVC: 2
3272670275416: RNCC: 5 | RNVC: 2
0715 31 12: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-401-6059
Monte Racleur

144016059
NO PRIMARY REF14-401-6059: RNCC: 3 | RNVC: 2
0U141303: RNCC: 5 | RNVC: 9
OU141303: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-409-5114
Retaining Ring Installation Tool

144095114
8812987000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-356-6004
Face Spanner Wrench Socket

143566004
D47568: RNCC: 3 | RNVC: 2

15 May 1979

5120-14-341-5349
Socket Head Screw Key

143415349
95A10364: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-360-6657
Spanner Wrench

143606657
8810546102: RNCC: 3 | RNVC: 2

19 Dec 1979

5120-14-456-3056
Open End Wrench

144563056
11116: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-467-1934
Open End Wrench

144671934
430018C: RNCC: 3 | RNVC: 2

21 Dec 1993

5120-14-563-8170
Torque Wrench

145638170
S.208-100D: RNCC: 3 | RNVC: 2
3148516934253: RNCC: 5 | RNVC: 2
693425: RNCC: 5 | RNVC: 2

18 Mar 2010

5120-14-407-3301
Joints Emmanche

144073301
853-201-380-0: RNCC: 3 | RNVC: 2

12 Feb 1986

5120-14-514-1225
Six Point Tip Screwdriver

145141225
ENFD6566-1-2X8X200: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-421-1390
Mise En Pla Matrice

144211390
CR700-15-3: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-410-0621
Entrainement Cle

144100621
853-100-211-0: RNCC: 3 | RNVC: 2

4 Jun 1986

5120-14-488-3158
Flat Tip Screwdriver

144883158
AZF.8X200: RNCC: 3 | RNVC: 2
250-5793: RNCC: 5 | RNVC: 2
0013431: RNCC: 5 | RNVC: 2
3148510134314: RNCC: 5 | RNVC: 2
AZF8X200: RNCC: 5 | RNVC: 2
8026720Y00: RNCC: 5 | RNVC: 2
FACOMAZF.8X200: RNCC: 5 | RNVC: 9

30 Apr 1997

5120-14-309-7432
Bearing Staking Installation Tool

143097432
341A93-3508-21: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-393-5217
Outil Blocage Rotor

143935217
RC0001490: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-296-8165

5120-14-329-6342
De Centrage Obus

143296342
SMS218: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-524-7393

5120-14-444-3149

5120-14-365-1194
Open End Wrench

143651194
254873: RNCC: 3 | RNVC: 2
254873: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-372-7672
Mechanical Puller Attachment

143727672
8810160001: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-482-1205
Retaining Ring Pliers

144821205
177E.13: RNCC: 3 | RNVC: 2
3148511408315: RNCC: 5 | RNVC: 2
0114248B00: RNCC: 5 | RNVC: 2
SYQ5183: RNCC: 5 | RNVC: 2
0140831: RNCC: 5 | RNVC: 9

20 Jun 1996

5120-14-244-9037
Socket Wrench Socket

142449037
K22: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-304-3159
Spanner Wrench

143043159
14138J: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-376-7052
Retaining Ring Pliers

143767052
1813: RNCC: 3 | RNVC: 2
3148512276005: RNCC: 5 | RNVC: 2
FACOM 1813: RNCC: 5 | RNVC: 2
958 267 000 001: RNCC: 6 | RNVC: 9

28 Apr 1982

5120-14-521-6364
Retaining Ring Pliers

145216364
179G.13: RNCC: 3 | RNVC: 2
0714 02 50: RNCC: 5 | RNVC: 2
0714 02 61: RNCC: 5 | RNVC: 2
0141301: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-513-0865
Final Drive Assembly Alignment Pin

145130865
800816719: RNCC: 3 | RNVC: 2

3 Mar 1999

5120-14-401-6817
Electrical Card Extractor

144016817
15168054: RNCC: 3 | RNVC: 2

13 Jun 1985

5120-14-488-3039
Retaining Ring Pliers

144883039
197E.18: RNCC: 3 | RNVC: 2
0145687: RNCC: 5 | RNVC: 2
197E18: RNCC: 5 | RNVC: 2
3148511456873: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-388-9248
Tube Packing Ring Installing Tool

143889248
8814354000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-505-9377
Mechanical Puller Step Plate

145059377
H117138B: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-361-6456
Spanner Wrench

143616456
BE011900: RNCC: 3 | RNVC: 2
BE011900: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-14-383-4666
Electrical Card Extractor

143834666
20198008: RNCC: 3 | RNVC: 2
20198008: RNCC: 5 | RNVC: 9

11 Apr 1983

5120-14-514-8417
Cross Tip Screwdriver

145148417
ENFD6569-2X150-6PANS: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-465-9512
Screw Push-Pull Jack

144659512
1063/91479: RNCC: 3 | RNVC: 2

21 Oct 1993

5120-14-232-9180
Support Equipement

142329180
78532: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-250-0118
Spanner Wrench

142500118
B02208: RNCC: 3 | RNVC: 2
0000330496: RNCC: 5 | RNVC: 2
0000330496: RNCC: 5 | RNVC: 9
330496: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-386-9744
Outil De Deglacage

143869744
26545920200: RNCC: 3 | RNVC: 2
265459202: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-378-5127
Jet De Freinage

143785127
6801J32-1178-20: RNCC: 3 | RNVC: 2
6801360A32-1178-20: RNCC: 5 | RNVC: 2

11 Aug 1982

5120-14-450-7487
Cross Tip Screwdriver

144507487
NO PRIMARY REF14-450-7487: RNCC: 3 | RNVC: 2
643200: RNCC: 5 | RNVC: 9
EPH1.5X100: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-358-7209
Outil De Maintien

143587209
51MS008: RNCC: 3 | RNVC: 2
51MS008: RNCC: 5 | RNVC: 9

7 Sep 1979

5120-14-416-7649
Mandrin Presse

144167649
540456: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-490-8908
Lime

144908908
4067 210 000 519: RNCC: 3 | RNVC: 2
F300 0T 000 5182: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8716
Pochoir

144908716
4063 791 110 050: RNCC: 3 | RNVC: 2
F300 0T 000 4956: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-297-1047

5120-14-291-2543

5120-14-252-0027

5120-14-415-2833
Spanner Wrench

144152833
3210-95-32-366: RNCC: 3 | RNVC: 2
85-649-9590: RNCC: 6 | RNVC: 9

28 Apr 1987

5120-14-505-4372
Leveling-Support Jack

145054372
12203005: RNCC: 3 | RNVC: 2

18 Mar 1998

5120-14-393-4114
Socket Head Screw Key

143934114
80-6: RNCC: 3 | RNVC: 2
61-M6: RNCC: 3 | RNVC: 2
61.M6: RNCC: 3 | RNVC: 2
3148511220108: RNCC: 5 | RNVC: 2
3272670233294: RNCC: 5 | RNVC: 2
0715 31 10: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-316-9160
Mechanical Puller Adapter

143169160
U.51B5-2: RNCC: 3 | RNVC: 2
0761840: RNCC: 5 | RNVC: 2
EMB0UTU51-17: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-201-5521
Poincon A Chev Lame

142015521
NO PRIMARY REF14-201-5521: RNCC: 3 | RNVC: 2
109-3: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-479-0292
Bearing And Bushing Inserter And Remover

144790292
888-356-600-2: RNCC: 3 | RNVC: 2
888-356-600-1: RNCC: 5 | RNVC: 2

6 Dec 1995

5120-14-201-6814
Hand Tube Flaring Tool

142016814
2504-14: RNCC: 3 | RNVC: 2
4034-0: RNCC: 3 | RNVC: 2
SYB0294: RNCC: 5 | RNVC: 2
0C001: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-416-1219
Pliers

144161219
910CP-160: RNCC: 3 | RNVC: 9
DEM910CP-160: RNCC: 5 | RNVC: 9

3 Jun 1987

5120-14-446-2226
Socket Wrench Socket

144462226
MHD104-23: RNCC: 3 | RNVC: 2
MH071-03-00: RNCC: 5 | RNVC: 2
MH071-03-00: RNCC: 5 | RNVC: 2

6 Mar 1991

5120-14-353-5613
Wrench Extension Handle

143535613
73-112-020: RNCC: 3 | RNVC: 2

16 Jan 1979

5120-14-444-3494
Socket Wrench Socket

144443494
GS86-01: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-438-5021
Face Spanner Wrench Socket

144385021
37MS020: RNCC: 3 | RNVC: 2
85-693-9822: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-440-0415
Mechanical Puller Attachment

144400415
807722: RNCC: 3 | RNVC: 2
85-694-3894: RNCC: 6 | RNVC: 9

10 Jul 1990

5120-14-216-4614
Socket Wrench Handle

142164614
R.110: RNCC: 3 | RNVC: 2
TMS4B: RNCC: 3 | RNVC: 2
TMS4B: RNCC: 5 | RNVC: 2
3148510518503: RNCC: 5 | RNVC: 2
R110: RNCC: 5 | RNVC: 2
91713018: RNCC: 5 | RNVC: 2
R.110: RNCC: 5 | RNVC: 2
0051850: RNCC: 5 | RNVC: 9
85-681-3570: RNCC: 6 | RNVC: 9

1 Jan 1965

5120-14-576-0799
Clip Remover

145760799
5000262467: RNCC: 3 | RNVC: 2

29 May 2013

5120-14-314-4887
Mandrin Pose Joint

143144887
M2D61063: RNCC: 3 | RNVC: 2
M2D353185: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-348-5099

5120-14-237-9810

5120-14-368-1447
Entraineur Rupteur

143681447
01585150000: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-428-5230
Contre-Plaque

144285230
MFG4392103: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-443-9770

5120-14-576-0348
Socket Wrench Socket

145760348
M009813: RNCC: 3 | RNVC: 2
Y00013634: RNCC: 5 | RNVC: 2

24 May 2013

5120-14-338-4795
Piece Dappui

143384795
C46395: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-419-0786
Equipe Entonnoir

144190786
2157: RNCC: 3 | RNVC: 2

30 Sep 1987

5120-14-428-5533
Equipe Support

144285533
MKG3712211: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-405-0864
Cylindre

144050864
400-106: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-372-7380
Support De Griffe

143727380
360A93-3227-11: RNCC: 3 | RNVC: 2

21 Sep 1981

5120-14-463-5039
Leveling-Support Jack

144635039
14535-00: RNCC: 3 | RNVC: 2

17 Jun 1993

5120-14-220-8514
Spanner Wrench

142208514
M115771: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-538-8255
Spanner Wrench

145388255
NGM0011044570029: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-452-9436
Cle Deverr Glissier

144529436
2256-303B545: RNCC: 3 | RNVC: 2
2256-303B545: RNCC: 5 | RNVC: 2

29 Jan 1992

5120-14-543-5494
Mechanical Puller Set

145435494
707447: RNCC: 3 | RNVC: 2
MONT 707447: RNCC: 5 | RNVC: 2

19 Nov 2004

5120-14-220-7882
Open End Wrench

142207882
RACC67: RNCC: 3 | RNVC: 2
RACC67: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-220-7878
Open End Wrench

142207878
RACC52: RNCC: 3 | RNVC: 2
RACC52: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-530-9200
Socket Wrench Spanner Attachment Set

145309200
134125: RNCC: 3 | RNVC: 2
3148511341254: RNCC: 5 | RNVC: 2
118.EC6: RNCC: 5 | RNVC: 2

17 Jul 2002

5120-14-437-2115
Spanner Wrench

144372115
0490-210007: RNCC: 3 | RNVC: 2

23 Jan 1990

5120-14-338-4709
Manual Control Lever

143384709
C46715: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-267-1997
Spanner Wrench

142671997
0297-78: RNCC: 3 | RNVC: 2
RA297: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-415-8087
Spanner Wrench

144158087
2098C: RNCC: 3 | RNVC: 2
2098C: RNCC: 5 | RNVC: 9

18 May 1987

5120-14-421-3421
Socket Head Screw Key

144213421
537084: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-320-4410
Spanner Wrench

143204410
C66135: RNCC: 3 | RNVC: 2
101002: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-389-3434
Spanner Wrench

143893434
098106: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-237-9464
Torque Wrench Adapter

142379464
M02010: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-575-3794
Splicing Sleeve Compressing Tool

145753794
30570-2001: RNCC: 3 | RNVC: 2

2 Apr 2013

5120-14-518-7066
Cle De Serrage

145187066
202422004840: RNCC: 3 | RNVC: 2

15 Feb 2000

5120-14-445-2937
Moteur Orient Outil

144452937
3511 192 08651: RNCC: 3 | RNVC: 2
3511 192 08651: RNCC: 5 | RNVC: 2

8 Feb 1991

5120-14-261-7659

5120-14-262-5506

5120-14-562-6286
Mechanical Puller

145626286
46AM149: RNCC: 3 | RNVC: 2

10 Nov 2009

5120-14-427-5895
Montage Calage Feu

144275895
MUP5550: RNCC: 3 | RNVC: 2

22 Oct 1988

5120-14-570-7244
Socket Wrench

145707244
94-SD11: RNCC: 3 | RNVC: 2

19 Jan 2012

5120-14-435-9483
Pin Inserter And Remover

144359483
2642188-7: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-521-6832
Ou Buse Melangeuse

145216832
9501PPM104: RNCC: 3 | RNVC: 2

4 Sep 2000

5120-14-574-6100
Splicing Sleeve Compressing Tool

145746100
60102080PT: RNCC: 3 | RNVC: 2

6 Feb 2013

5120-14-444-3159

5120-14-444-3162

5120-14-416-7536
Speciale Cle

144167536
537355: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-275-9926

5120-14-204-9201
Shovel Handle

142049201
NO PRIMARY REF14-204-9201: RNCC: 3 | RNVC: 2
B0I4-312: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-249-6937
Portediamant

142496937
PD1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-330-6194

5120-14-482-6455
Serre-Cable

144826455
232070299: RNCC: 3 | RNVC: 2

18 Jul 1996

5120-14-443-8019
Flasque Darret

144438019
D12502-040-06: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-391-7048
Reglage Outillage

143917048
MJK260-41: RNCC: 3 | RNVC: 2
MJK260-41: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-416-7973
Vise Jaw Caps

144167973
99920608: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-466-5329
Socket Head Screw Key

144665329
46423476: RNCC: 3 | RNVC: 2

15 Nov 1993

5120-14-385-5761
Mechanical Puller Attachment

143855761
130635: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-369-8697

5120-14-560-4254
Screwdriver Bit

145604254
ETS.002,5: RNCC: 3 | RNVC: 2
MO099464: RNCC: 6 | RNVC: 9

17 Apr 2009

5120-14-226-7568
Combination Box And Open End Wrench

142267568
40.7/8: RNCC: 3 | RNVC: 2
50.7/8: RNCC: 3 | RNVC: 2
50-7/8: RNCC: 3 | RNVC: 9
3148511009000: RNCC: 5 | RNVC: 2
40 7-8: RNCC: 5 | RNVC: 2
40-7-8: RNCC: 5 | RNVC: 2
3272670252516: RNCC: 5 | RNVC: 2
0713 303 11: RNCC: 5 | RNVC: 2
40.7/8: RNCC: 5 | RNVC: 2
0100900: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-279-9266
Spanner Wrench

142799266
078913: RNCC: 3 | RNVC: 2
0-78913: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-451-2677
Sertissag Outillage

144512677
MMG047-08: RNCC: 3 | RNVC: 2
MMG047-08: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-304-3147
Bague De Retreint

143043147
S16-0606-1651: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-513-4356
Socket Head Screw Key

145134356
NO PRIMARY REF14-513-4356: RNCC: 3 | RNVC: 2
NNP 5120860703340: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-222-6160
Socket Wrench Socket

142226160
NO PRIMARY REF14-222-6160: RNCC: 3 | RNVC: 2
40L11: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-441-2342
Torque Wrench Adapter

144412342
6810V32-2120-00: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-349-0296

5120-14-042-3574
Pre-Sertissage Bloc

140423574
RMPS5F25X1M: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-225-3975
Adaptateur Cle Dyna

142253975
09-16: RNCC: 3 | RNVC: 2
257292: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-350-6880

5120-14-573-4505
Torque Wrench Adapter

145734505
14100071196: RNCC: 3 | RNVC: 2

12 Oct 2012

5120-14-040-4690
Socle

140404690
23988: RNCC: 3 | RNVC: 2
23988: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-493-3448
Cle

144933448
0411-60223: RNCC: 3 | RNVC: 2
F300 0T 012 4874: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-330-7270

5120-14-518-0262
Six Point Tip Screwdriver

145180262
ENFD6576-60X150: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-215-1343
Obus Demmanchement

142151343
3130S95-12-014: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-253-4458
Cle Speciale

142534458
3210-95-31-045: RNCC: 3 | RNVC: 2
08-388: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-261-8789
Tube Packing Ring Installing Tool

142618789
3130-95-63-101-1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-217-2648
Cle Vidange Carbura

142172648
M12-038: RNCC: 3 | RNVC: 2
M12038: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-245-1726

5120-14-568-8319
Seal Inserter

145688319
AVJ31177-01-300801: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-14-261-7192
Coffret Doutillage

142617192
NO PRIMARY REF14-261-7192: RNCC: 3 | RNVC: 2
114H213: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-311-7477
Spanner Wrench

143117477
6800-1044: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-276-3163
Socket Wrench Socket

142763163
K1 1-8: RNCC: 3 | RNVC: 2
C-1'1/8: RNCC: 3 | RNVC: 2
C1 1-8: RNCC: 3 | RNVC: 2
K1 1-8: RNCC: 3 | RNVC: 9
3272670288317: RNCC: 5 | RNVC: 2
78C1 1-8: RNCC: 5 | RNVC: 9
DEMK1 1-8: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-406-6550
Spanner Wrench

144066550
853-200-809-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-413-5707
Socket Head Screw Key

144135707
NO PRIMARY REF14-413-5707: RNCC: 3 | RNVC: 2
5S-40CLEDIAM55: RNCC: 5 | RNVC: 9
5S-40CLEDIAM55: RNCC: 5 | RNVC: 9

17 Dec 1986

5120-14-429-1570
Outillage Mandrin

144291570
547642: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-568-8271
Combination Box And Open End Wrench

145688271
440.29: RNCC: 3 | RNVC: 2

8 Jul 2011

5120-14-574-3977
Reinforcing Bar Bending Bar

145743977
460402: RNCC: 3 | RNVC: 2

16 Jan 2013

5120-14-575-7322
Jack Elevating Block

145757322
14100077648: RNCC: 3 | RNVC: 2

26 Apr 2013

5120-14-354-6757
Cle Buse Dinjection

143546757
25545910100: RNCC: 3 | RNVC: 2
255459101: RNCC: 5 | RNVC: 9

31 Jan 1979

5120-14-259-0878

5120-14-370-6396

5120-14-217-3637

5120-14-375-2995
Cle A Machoire

143752995
A33740Y01: RNCC: 3 | RNVC: 2
A33740Y: RNCC: 5 | RNVC: 2

26 Feb 1982

5120-14-455-1886
Ensemble A Dudgeonn

144551886
14189450Q: RNCC: 3 | RNVC: 2

7 May 1992

5120-14-357-4324
Socket Head Screw Key

143574324
7395CLEDE1-27MM: RNCC: 3 | RNVC: 2
XCELITE99-71MM: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-508-8997
Hand Blind Riveter

145088997
NO PRIMARY REF14-508-8997: RNCC: 3 | RNVC: 2
7540-000: RNCC: 5 | RNVC: 2
7540-0000: RNCC: 5 | RNVC: 9

7 Oct 1998

5120-14-513-4585
Socket Head Screw Key

145134585
NO PRIMARY REF14-513-4585: RNCC: 3 | RNVC: 2
NNP 5120868689090: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-384-7341
Electrical Card Extractor

143847341
NO PRIMARY REF14-384-7341: RNCC: 3 | RNVC: 2
16931958: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-355-5498
Spanner Wrench

143555498
MHS288-50: RNCC: 3 | RNVC: 2
MHJ288-27: RNCC: 5 | RNVC: 2
MHS288-50: RNCC: 5 | RNVC: 2

19 Mar 1979

5120-14-286-2236
Open End Wrench

142862236
20.18: RNCC: 3 | RNVC: 2
3059002250: RNCC: 5 | RNVC: 2
3148510935805: RNCC: 5 | RNVC: 2
20-18: RNCC: 5 | RNVC: 2
0093580: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-270-7135
Open End Wrench

142707135
NO PRIMARY REF14-270-7135: RNCC: 3 | RNVC: 2
74231-10X12: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-248-7441
Joint Chargeur

142487441
G1-15-012: RNCC: 3 | RNVC: 2
G1-15012: RNCC: 5 | RNVC: 2
G1-15012: RNCC: 5 | RNVC: 2
G1-15-012: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-431-2866
Spanner Wrench

144312866
1265-090C501: RNCC: 3 | RNVC: 2
1265-090-A501: RNCC: 5 | RNVC: 2
1265-090A501: RNCC: 5 | RNVC: 2
1265-090C501: RNCC: 5 | RNVC: 2

12 Apr 1989

5120-14-355-3463
Open End Wrench

143553463
330A93-2040-00: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-327-0566
Turbi Guide Montage

143270566
0S21631: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-040-3043
Embout De Cle

140403043
RT8593: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-416-6469
Poignee Dextraction

144166469
27451433-7: RNCC: 3 | RNVC: 2

23 Jun 1987

5120-14-313-7291
Montage Mise En For

143137291
S16-0608-1831: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-382-5513
Electrical Card Extractor

143825513
NO PRIMARY REF14-382-5513: RNCC: 3 | RNVC: 2
20031107: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-272-3659
Open End Wrench

142723659
E74302C27-29WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-514-3809
Wrench Extension Handle

145143809
177E700-00: RNCC: 3 | RNVC: 2
177E700-00: RNCC: 5 | RNVC: 9

19 May 1999

5120-14-357-9468
Spanner Wrench

143579468
393025: RNCC: 3 | RNVC: 2

20 Jul 1979

5120-14-342-3618
Open End Wrench

143423618
RT20776: RNCC: 3 | RNVC: 2

7 Feb 1996

5120-14-551-0059
Retaining Ring Installation Tool

145510059
J47127: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-435-1153
Socket Wrench Socket

144351153
111492: RNCC: 3 | RNVC: 2

18 Oct 1989

5120-14-322-0350
Spanner Wrench

143220350
000601005M: RNCC: 3 | RNVC: 2
CPF403260: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-542-4922
Screwdriver Bit Extension

145424922
117600: RNCC: 3 | RNVC: 2
11760: RNCC: 5 | RNVC: 2
VX061044: RNCC: 6 | RNVC: 9

21 Jul 2004

5120-14-396-7131
Spanner Wrench

143967131
001-29132J: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-401-0208
Spanner Wrench

144010208
593020: RNCC: 3 | RNVC: 2
92E0186: RNCC: 5 | RNVC: 2

21 May 1985

5120-14-473-0718
Screwdriver Bit

144730718
EH.106: RNCC: 3 | RNVC: 2
0137696D00: RNCC: 5 | RNVC: 2
0023376: RNCC: 5 | RNVC: 2
91759700: RNCC: 5 | RNVC: 2
0614 176 96: RNCC: 5 | RNVC: 2
3148510233765: RNCC: 5 | RNVC: 2

7 Dec 1994

5120-14-227-0673

5120-14-529-3747
Spanner Wrench

145293747
4111-5300: RNCC: 3 | RNVC: 2

27 Mar 2002

5120-14-212-9103

5120-14-519-0600
Open End Wrench

145190600
C04050725: RNCC: 3 | RNVC: 2
C04050725: RNCC: 5 | RNVC: 9

6 Mar 2000

5120-14-392-5669
Cross Tip Screwdriver

143925669
ARX40: RNCC: 3 | RNVC: 2
0000057700: RNCC: 5 | RNVC: 2
CAR577: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-302-6695
Open End Wrench

143026695
RACD30: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-446-0312
Spanner Wrench

144460312
M13830: RNCC: 3 | RNVC: 2

4 Mar 1991

5120-14-530-2093
Socket Head Screw Key

145302093
83SH.5/32: RNCC: 3 | RNVC: 2
3148511238578: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-462-9612
Support Ecrou

144629612
80427004: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-394-6496

5120-14-292-7387

5120-14-296-9114
Outil Serrage Culas

142969114
8-0129: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-255-2935
Extracteur

142552935
8-0507Z: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-241-1433
Cle A Ergots Specia

142411433
0661-78: RNCC: 3 | RNVC: 2
RA661: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-493-9354
Cle Male 8

144939354
5010051135: RNCC: 3 | RNVC: 2
F300 0T 014 6561: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-468-7194
Pince A Ligaturer

144687194
3911-901: RNCC: 3 | RNVC: 2
SYQ0734: RNCC: 5 | RNVC: 2
1020717: RNCC: 5 | RNVC: 2

16 Mar 1994

5120-14-393-4118
Socket Head Screw Key

143934118
61.M14: RNCC: 3 | RNVC: 2
80-14: RNCC: 3 | RNVC: 2
61-M14: RNCC: 3 | RNVC: 2
3148511220900: RNCC: 5 | RNVC: 2
3272670289086: RNCC: 5 | RNVC: 2
0715 31 14: RNCC: 5 | RNVC: 2

7 Apr 1984

5120-14-440-8020
Spanner Wrench

144408020
Y075-049-000A: RNCC: 3 | RNVC: 2

25 Jul 1990

5120-14-383-6520
Vise Jaw Caps

143836520
S10-0150-1241: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-200-8158
Adjustable Wrench

142008158
61-04-15: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-465-4613
Face Spanner Wrench Socket

144654613
851-500-033-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-396-4126
Pince De Retouche

143964126
6274-51017: RNCC: 3 | RNVC: 2
6274-2503120: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-383-6533
Spanner Wrench

143836533
S16-0653-4032: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-368-0740
Flat Tip Screwdriver

143680740
ACZ.4X100: RNCC: 3 | RNVC: 2
3059001636: RNCC: 5 | RNVC: 2
3148510038407: RNCC: 5 | RNVC: 2
AC4X100: RNCC: 5 | RNVC: 2
0240712B00: RNCC: 5 | RNVC: 2
130134: RNCC: 5 | RNVC: 2
T586-103: RNCC: 5 | RNVC: 2
AC.4X100: RNCC: 5 | RNVC: 2
91368787: RNCC: 5 | RNVC: 2
0003840: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-506-7640
De Montage Outil

145067640
M12020: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-331-0992

5120-14-383-6552
Spanner Wrench

143836552
6216J: RNCC: 3 | RNVC: 2

11 Apr 1983

5120-14-527-3068
Screw Thread Insert Tang Breakoff Tool

145273068
5010323462: RNCC: 3 | RNVC: 2

22 Oct 2001

5120-14-414-9696
Screw Thread Insert Inserter

144149696
23521050600: RNCC: 3 | RNVC: 2

26 Mar 1987

5120-14-515-8936
Socket Wrench Socket

145158936
12702006: RNCC: 3 | RNVC: 2

24 Aug 1999

5120-14-552-7437
Cross Tip Screwdriver

145527437
AD.2X125: RNCC: 3 | RNVC: 2
3148510043227: RNCC: 5 | RNVC: 2
AD.2X125: RNCC: 5 | RNVC: 2

29 Jan 2007

5120-14-379-3643
A Fourch Tournevis

143793643
004335005P: RNCC: 3 | RNVC: 2

1 Oct 1982

5120-14-421-2052
Spanner Wrench

144212052
OUT-22MS19: RNCC: 3 | RNVC: 2
0UT22MS19: RNCC: 5 | RNVC: 2

6 Jan 1988

5120-14-375-2871
Face Spanner Wrench Socket

143752871
73-115-027: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-306-5957

5120-14-330-3083

5120-14-355-3843
Levier Double Verin

143553843
29207: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-354-9141

5120-14-254-4974
Screwdriver Bit

142544974
LAME14MM: RNCC: 3 | RNVC: 9

1 Jan 1969

5120-14-530-2069
Flat Tip Screwdriver

145302069
ACGH.14X250: RNCC: 3 | RNVC: 2

22 May 2002

5120-14-559-8281
Spanner Wrench

145598281
Y075-084-000A: RNCC: 3 | RNVC: 2
89532730: RNCC: 5 | RNVC: 2

20 Feb 2009

5120-14-216-3232
Cle Decartement Des

142163232
NO PRIMARY REF14-216-3232: RNCC: 3 | RNVC: 2
12-43-04-004: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-428-5832
Outil Embout

144285832
46AM092-00-0019: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-264-9616
Spanner Wrench

142649616
0599-78: RNCC: 3 | RNVC: 2
RA599: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-242-4795
Spanner Wrench

142424795
164700: RNCC: 3 | RNVC: 2
1647: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-264-9578
Spanner Wrench

142649578
0290-78: RNCC: 3 | RNVC: 2
RA290: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-421-8227
Socket Wrench Socket

144218227
3215529: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-254-8045
Socket Head Screw Key

142548045
T34BBH4BREP30: RNCC: 3 | RNVC: 2
T0553BBH4BPC30: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-529-2668
Electronic Equipment Alignment Tool

145292668
39237134: RNCC: 3 | RNVC: 2

20 Mar 2002

5120-14-447-3439
Bearing And Bushing Inserter And Remover

144473439
60917714: RNCC: 3 | RNVC: 2
89280539: RNCC: 5 | RNVC: 2

15 May 1991

5120-14-574-3669
Digging Bar

145743669
152120001: RNCC: 3 | RNVC: 2

14 Jan 2013

5120-14-421-5885
Socket Wrench Adapter

144215885
K.232A: RNCC: 3 | RNVC: 2
91628167: RNCC: 5 | RNVC: 2
3148510311159: RNCC: 5 | RNVC: 2
0031115: RNCC: 5 | RNVC: 9

20 Jan 1988

5120-14-234-4246
Cle Pour Vis Creuse

142344246
17926T1REP4: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-528-4538
Mechanical Puller Attachment

145284538
21420629-00: RNCC: 3 | RNVC: 2
21420629-1: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-265-0913
Detent Handling Tool

142650913
330A98-2042-00: RNCC: 3 | RNVC: 2
330A98-2042-0000: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-511-0291
Screwdriver Bit

145110291
EH.107/32: RNCC: 3 | RNVC: 2

25 Nov 1998

5120-14-281-5133
Spanner Wrench

142815133
356-2M232P13: RNCC: 3 | RNVC: 9
PA356-2M232P13: RNCC: 5 | RNVC: 2
PA356-2M232P13: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-481-4821
Bearing And Bushing Remover

144814821
NO PRIMARY REF14-481-4821: RNCC: 3 | RNVC: 2
806161: RNCC: 5 | RNVC: 9

8 May 1996

5120-14-386-9743
Socket Wrench Socket

143869743
26145045900: RNCC: 3 | RNVC: 2
428820-00: RNCC: 5 | RNVC: 2
261450459: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-363-5178
Socket Head Screw Key

143635178
70374542: RNCC: 3 | RNVC: 2
70374542: RNCC: 5 | RNVC: 9
85-691-1911: RNCC: 6 | RNVC: 9

9 May 1980

5120-14-427-7611
Spanner Wrench

144277611
NO PRIMARY REF14-427-7611: RNCC: 3 | RNVC: 2
E0949618: RNCC: 5 | RNVC: 9

9 Nov 1988

5120-14-306-5978
Electrical Contact Inserter

143065978
001131 301 60: RNCC: 3 | RNVC: 2
1131-16: RNCC: 5 | RNVC: 2
00113130160: RNCC: 5 | RNVC: 2
1131-301-60: RNCC: 5 | RNVC: 2
91571279: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-370-1163
Etau Pivota Semelle

143701163
280-150S: RNCC: 3 | RNVC: 2
130173: RNCC: 5 | RNVC: 2

18 May 1981

5120-14-477-1610
Outil De Controle

144771610
287047628: RNCC: 3 | RNVC: 2

26 Jul 1995

5120-14-451-2700
Sertissag Outillage

144512700
30AM155: RNCC: 3 | RNVC: 2

6 Nov 1991

5120-14-274-3105

5120-14-539-3177
Mechanical Puller Attachment

145393177
T947G3102101: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-434-6457
Pliers

144346457
185.20CPY: RNCC: 3 | RNVC: 2
3148511422205: RNCC: 5 | RNVC: 2
0178971N00: RNCC: 5 | RNVC: 2
91634516: RNCC: 5 | RNVC: 2
0142220: RNCC: 5 | RNVC: 9

27 Sep 1989

5120-14-548-2293
Torque Wrench Adapter

145482293
13.19: RNCC: 3 | RNVC: 2

15 Dec 2005

5120-14-041-6495
Compress Entraineur

140416495
8811841000: RNCC: 3 | RNVC: 2
7M123AC: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-513-9101
Spanner Wrench

145139101
511810015: RNCC: 3 | RNVC: 2

14 Apr 1999

5120-14-313-7222
Spanner Wrench

143137222
C46958: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-370-6142
Verin Fourrure

143706142
10-5205-520: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-362-6842

5120-14-371-5670

5120-14-032-3498
Monte-Segments

140323498
35659: RNCC: 3 | RNVC: 2

17 Feb 1983

144913866
NM133: RNCC: 3 | RNVC: 2
F300 0T 002 6697: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0150
Cle

144910150
4602 007 200 110: RNCC: 3 | RNVC: 2
F300 0T 001 0936: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-3826
Cle Emb

144913826
1130: RNCC: 3 | RNVC: 2
F300 0T 002 6135: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-215-0229

5120-14-521-2496
Hand Screw Jack Extension Cap

145212496
341A91-0101-00: RNCC: 3 | RNVC: 2

12 Jul 2000

5120-14-514-0127
Open End Wrench

145140127
ENFD29159-19X22: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-276-3101
Socket Wrench Socket

142763101
M.2'5/8: RNCC: 3 | RNVC: 2
M-2'5/8: RNCC: 3 | RNVC: 2
M2 5-8: RNCC: 3 | RNVC: 2
3148510322001: RNCC: 5 | RNVC: 2
M2 5-8: RNCC: 5 | RNVC: 2
3272670276383: RNCC: 5 | RNVC: 2
0032200: RNCC: 5 | RNVC: 9
M2P0UCES5-8: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-464-9281
Speciale Pince

144649281
9970-111-045: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-522-0237
Socket Wrench Socket

145220237
OCE83-30L: RNCC: 3 | RNVC: 2
0CE83-30L: RNCC: 5 | RNVC: 2

29 Sep 2000

5120-14-241-6060

5120-14-388-4201
Screw Push-Pull Jack

143884201
02640913100: RNCC: 3 | RNVC: 2
026409131: RNCC: 5 | RNVC: 2

3 Nov 1983

5120-14-040-2939
Spanner Wrench

140402939
0751-78: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-491-0173
Cle

144910173
4602 007 200 300: RNCC: 3 | RNVC: 2
F300 0T 001 0961: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-254-4228
Craftsman's Tweezers

142544228
103: RNCC: 3 | RNVC: 2
206: RNCC: 5 | RNVC: 2
10: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-375-3156

5120-14-275-0212

5120-14-216-6730

5120-14-578-1557
Socket Wrench

145781557
8816082009: RNCC: 3 | RNVC: 2

5 Nov 2013

5120-14-419-2732
Open End Wrench

144192732
537565: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-416-7528
Mandrin Presse

144167528
537298: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-422-8167
Outil De Reglage

144228167
39976191: RNCC: 3 | RNVC: 2

17 Mar 1988

5120-14-558-1212
Socket Wrench Spanner Attachment

145581212
116.200E2: RNCC: 3 | RNVC: 2

3 Sep 2008

5120-14-563-1251
Seal Inserter

145631251
14100045315: RNCC: 3 | RNVC: 2

5 Jan 2010

5120-14-368-6865
Socket Head Screw Key

143686865
300A96405: RNCC: 3 | RNVC: 2
91373862: RNCC: 5 | RNVC: 2
300A96405: RNCC: 5 | RNVC: 9
300A96405: RNCC: 5 | RNVC: 9

10 Mar 1981

5120-14-406-2862
Ec0uvill0n Plastiqu

144062862
NO PRIMARY REF14-406-2862: RNCC: 3 | RNVC: 2
1135548: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-465-4612
Bearing And Bushing Remover

144654612
851-500-032-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-406-5669
Face Spanner Wrench Socket

144065669
853-200-728-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-490-8911
Lime

144908911
4067 210 000 531: RNCC: 3 | RNVC: 2
F300 0T 000 5185: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-285-4544
Spanner Wrench

142854544
HE60X8: RNCC: 3 | RNVC: 2
531449: RNCC: 5 | RNVC: 2
HE60X8: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-386-1578
Mechanic's Bench Block

143861578
6801P31-0010-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-445-5630
Bearing And Bushing Remover

144455630
516301-03: RNCC: 3 | RNVC: 9

18 Feb 1991

5120-14-327-4922
Spanner Wrench

143274922
E74-323-89A102: RNCC: 2 | RNVC: 2

2 Jul 1975

5120-14-207-9008

5120-14-236-4572

5120-14-363-6030

5120-14-253-3646
Extracteur De Couve

142533646
42083: RNCC: 3 | RNVC: 2
42083A: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-040-0673

5120-14-226-6563

5120-14-490-6947
Gun

144906947
241 G 01348 255: RNCC: 3 | RNVC: 2
F300 0T 000 1083: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-234-3451
Extracteur

142343451
M02020: RNCC: 3 | RNVC: 2
0000330484: RNCC: 5 | RNVC: 2
0000330484: RNCC: 5 | RNVC: 9
330484: RNCC: 5 | RNVC: 9
330484: RNCC: 6 | RNVC: 9

1 Jan 1967

5120-14-370-6399

5120-14-410-3843
Poussoir Outillage

144103843
15737-517: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-343-8374

5120-14-240-4192

5120-14-538-9000
Bearing And Bushing Inserter And Remover

145389000
NGM0023075031029: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-446-9966
Vise Jaw Caps

144469966
31470: RNCC: 3 | RNVC: 2

25 Apr 1991

5120-14-383-0893
Jeu Obturateurs

143830893
9970-121-204: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-351-2468
Verin Hydrauli Tige

143512468
608-001: RNCC: 3 | RNVC: 2

10 Aug 1978

5120-14-478-5861
De Serrage Outil

144785861
705513-00: RNCC: 3 | RNVC: 2

8 Nov 1995

5120-14-466-2588
Emmanchement Guide

144662588
0XB501-520-802-04R: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-404-0808
Jeu Fourchette Bobi

144040808
853-200-871-0: RNCC: 3 | RNVC: 2

11 Sep 1985

5120-14-315-2792

5120-14-223-2999

5120-14-521-5768
Pliers

145215768
553L: RNCC: 3 | RNVC: 2
283R: RNCC: 5 | RNVC: 2
3272670348110: RNCC: 5 | RNVC: 2
3272670391710: RNCC: 5 | RNVC: 2

23 Aug 2000

5120-14-529-2695
Flat Tip Screwdriver Set

145292695
AR.JS5: RNCC: 3 | RNVC: 2
3148515005350: RNCC: 5 | RNVC: 2

20 Mar 2002

5120-14-394-9014
Wrench Extension Handle

143949014
54M3: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-472-3905
Body And Fender Repair Pick

144723905
904: RNCC: 3 | RNVC: 2
3148512131403: RNCC: 5 | RNVC: 2
0213140: RNCC: 5 | RNVC: 9

19 Oct 1994

5120-14-304-4381
Spanner Wrench

143044381
8811110000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-527-2885
Detent Handling Tool

145272885
0621142MECA011: RNCC: 3 | RNVC: 9
SYQ0455: RNCC: 5 | RNVC: 2

18 Oct 2001

5120-14-430-3447
Preformed Packing Inserter

144303447
RT17385: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-526-4873
Spanner Wrench

145264873
R46609: RNCC: 3 | RNVC: 2

1 Aug 2001

5120-14-349-9213
Spanner Wrench

143499213
6511-99211: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-220-7887
Open End Wrench

142207887
RACD38: RNCC: 3 | RNVC: 2
RACD38: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-334-8729
Open End Wrench

143348729
10-15X17: RNCC: 3 | RNVC: 2
10-15X17CM: RNCC: 5 | RNVC: 2
91313174: RNCC: 5 | RNVC: 2
85-688-4451: RNCC: 6 | RNVC: 9

2 Jun 1976

5120-14-513-7379
Flat Tip Screwdriver

145137379
ENFD6560-1X5-5X100: RNCC: 3 | RNVC: 2

9 Apr 1999

5120-14-498-0442
Cle

144980442
21360: RNCC: 3 | RNVC: 2
1012321360: RNCC: 5 | RNVC: 9
21360: RNCC: 5 | RNVC: 9
F300 0T 001 7323: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-225-0195

5120-14-424-5264
Cle Purge Regulateu

144245264
7M480: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-283-3971

5120-14-241-5683

5120-14-316-1591
Matoir Frein Ecrou

143161591
C62098: RNCC: 3 | RNVC: 2
100926: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-233-4401

5120-14-281-2957
Extracteur Piston S

142812957
C46818: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-214-2911
Cle A Rotule Specia

142142911
8482: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-288-7121

5120-14-448-7858
Mechanical Puller Adapter

144487858
U.49R1: RNCC: 3 | RNVC: 2
3148510702551: RNCC: 5 | RNVC: 2
U49R1: RNCC: 5 | RNVC: 2
91719226: RNCC: 5 | RNVC: 2
0070255: RNCC: 5 | RNVC: 9

10 Jul 1991

5120-14-544-7135
Screwdriver Bit

145447135
330031998: RNCC: 3 | RNVC: 2

17 Feb 2005

5120-14-426-8448
Bearing And Bushing Inserter And Remover

144268448
0411-60203: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-421-0789
Passe-Joint

144210789
6254-58484: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-491-4141
Cle Emb 17

144914141
NO PRIMARY REF14-491-4141: RNCC: 3 | RNVC: 2
4602 007 200 280: RNCC: 5 | RNVC: 2
F300 0T 002 7776: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-270-7136
Open End Wrench

142707136
NO PRIMARY REF14-270-7136: RNCC: 3 | RNVC: 2
74231-14X17: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-251-9638
Socket Head Screw Key

142519638
NO PRIMARY REF14-251-9638: RNCC: 3 | RNVC: 2
200UCET155UC: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-575-9368
Seal Inserter And Remover

145759368
TM4735G001: RNCC: 3 | RNVC: 2

16 May 2013

5120-14-490-8989
Boite

144908989
4068 390 000 104: RNCC: 3 | RNVC: 2
F300 0T 000 5285: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-8876
Etampe

144908876
4067 150 000 373: RNCC: 3 | RNVC: 2
F300 0T 000 5148: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-233-6931

5120-14-412-4664
Bearing And Bushing Inserter

144124664
P117148H: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-527-2960
Spanner Wrench

145272960
5000261760: RNCC: 3 | RNVC: 2

19 Oct 2001

5120-14-472-2286
Socket Head Screw Key

144722286
10093665: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-301-4119
Open End Wrench

143014119
69-95: RNCC: 3 | RNVC: 2
3272670207769: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-226-0010

5120-14-223-4984

5120-14-274-8345

5120-14-442-4510
Spanner Wrench

144424510
IF1033-150: RNCC: 3 | RNVC: 9

16 Oct 1990

5120-14-427-6492
Socket Head Screw Key

144276492
NO PRIMARY REF14-427-6492: RNCC: 3 | RNVC: 2
E0949627: RNCC: 5 | RNVC: 9

27 Oct 1988

5120-14-401-4129
Spanner Wrench

144014129
332A93-3501-00: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-441-2309
Socket Wrench Adapter

144412309
6804V32-3115-15: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-423-9850
Screwdriver Bit

144239850
0024590: RNCC: 3 | RNVC: 2
ES.102,5: RNCC: 5 | RNVC: 2
ES102-5: RNCC: 5 | RNVC: 2
91626506: RNCC: 5 | RNVC: 2

5 May 1988

5120-14-374-6763
Spanner Wrench

143746763
D1512-2233: RNCC: 3 | RNVC: 2
D1512-2233: RNCC: 5 | RNVC: 9

30 Jan 1982

5120-14-386-8225
Hand Blind Riveter

143868225
GESIPA13-05: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-350-0251
Mechanical Puller Attachment

143500251
3130S95-60-014: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-365-0193
Socket Wrench Socket

143650193
S.1'1/8H: RNCC: 3 | RNVC: 2
S1-1-8H: RNCC: 5 | RNVC: 2
3148510551203: RNCC: 5 | RNVC: 2
S.1'1/8H: RNCC: 5 | RNVC: 2
0055120: RNCC: 5 | RNVC: 9
S1 1-8H: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-406-6195
Joints Emmanche

144066195
853-200-793-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-348-9515
Open End Wrench

143489515
10-14X17-P: RNCC: 3 | RNVC: 2
10-14X17P: RNCC: 3 | RNVC: 2
3272670292376: RNCC: 5 | RNVC: 2
10-14X17CP: RNCC: 5 | RNVC: 9

19 Apr 1978

5120-14-558-3398
Screwdriver Bit

145583398
EH.203/8: RNCC: 3 | RNVC: 2

23 Sep 2008

5120-14-483-8624
Bearing And Bushing Remover

144838624
0-702203-2: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-565-4455
Mechanical Puller

145654455
885261: RNCC: 3 | RNVC: 2

19 Aug 2010

5120-14-254-5462

5120-14-208-6377

5120-14-572-3794
Socket Wrench Socket

145723794
K.38HB: RNCC: 3 | RNVC: 2

28 Jun 2012

5120-14-223-7458
Cle Pour Ecrou De R

142237458
701309: RNCC: 3 | RNVC: 9
F09W17035: RNCC: 5 | RNVC: 2
062054214: RNCC: 5 | RNVC: 9
54214: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-490-6889
Drill

144906889
240 D 01884 017: RNCC: 3 | RNVC: 2
F300 0T 000 0998: RNCC: 6 | RNVC: 9

8 Oct 1997