What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 70 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 70 of 110

5120-14-040-3544
Arrache Moyeu

140403544
S2428: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-576-1199
Ratchet Wrench

145761199
467S.14: RNCC: 3 | RNVC: 2
819614: RNCC: 5 | RNVC: 2
3148518196147: RNCC: 5 | RNVC: 2

30 May 2013

5120-14-427-0888
Outillage Mandrin

144270888
537365: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-411-9185
Outillage Controle

144119185
27980070: RNCC: 3 | RNVC: 2

16 Sep 1986

5120-14-379-8747

5120-14-227-0892

5120-14-362-1728

5120-14-201-2195
Socket Wrench Socket

142012195
0055300: RNCC: 3 | RNVC: 2
S.12L: RNCC: 5 | RNVC: 2
S12L: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-296-9001

5120-14-292-7004

5120-14-553-0697
Bearing Staking Installation Tool

145530697
39297029: RNCC: 3 | RNVC: 2

27 Feb 2007

5120-14-445-7705
Speciale Cle

5120-14-523-5440
Hand Hose Fitting Swaging Tool Kit

145235440
DLTFRPSKT3000A: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-474-7496
Mechanical Puller Step Plate

144747496
45057236: RNCC: 3 | RNVC: 2
45057236: RNCC: 5 | RNVC: 9

1 Mar 1995

5120-14-455-7232
Screwdriver Bit Extension

144557232
132153: RNCC: 3 | RNVC: 2

11 Jun 1992

5120-14-516-9013
Pliers

145169013
402.MT: RNCC: 3 | RNVC: 2
3148511750407: RNCC: 5 | RNVC: 2
1091868S00: RNCC: 5 | RNVC: 2
0175040: RNCC: 5 | RNVC: 9

20 Oct 1999

5120-14-255-6334
Tournevis Special

142556334
M15-002: RNCC: 3 | RNVC: 2
M15-002: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-491-5726
Fourreau

144915726
NO PRIMARY REF14-491-5726: RNCC: 3 | RNVC: 2
8P459: RNCC: 5 | RNVC: 9
F300 0T 003 4002: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-513-0866
Final Drive Assembly Alignment Pin

145130866
800815179: RNCC: 3 | RNVC: 2

3 Mar 1999

5120-14-315-1881
Outil Repose Joint

143151881
0-79440-1-2: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-488-5517
Retaining Ring Pliers

144885517
169E.13: RNCC: 3 | RNVC: 2
3148511394618: RNCC: 5 | RNVC: 2
169E13: RNCC: 5 | RNVC: 2
0139461: RNCC: 5 | RNVC: 2

21 May 1997

5120-14-469-3434
Conducte Extracteur

144693434
5000946100: RNCC: 3 | RNVC: 2

20 Apr 1994

5120-14-460-1547
Fausse Aile Helice

144601547
PL1BV602OX890001B: RNCC: 3 | RNVC: 2

13 Jan 1993

5120-14-434-9062
Socket Wrench Screwdriver Attachment

144349062
305204: RNCC: 3 | RNVC: 2
GESM824890: RNCC: 5 | RNVC: 2

9 Oct 1989

5120-14-459-1591
Bearing Staking Installation Tool

144591591
45056076: RNCC: 3 | RNVC: 2
45056076: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-216-5159
Screwdriver Bit

142165159
SP4: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-382-1606
Socket Head Screw Key

143821606
990305: RNCC: 3 | RNVC: 2
990305: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-432-7116
Screwdriver Bit

144327116
OUT50323: RNCC: 3 | RNVC: 2
0UT50323: RNCC: 5 | RNVC: 2

21 Jun 1989

5120-14-296-0495
Face Spanner Wrench Socket

142960495
5000263019: RNCC: 3 | RNVC: 2
5000263019: RNCC: 5 | RNVC: 9
R0U318: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-544-5003
Flat Tip Screwdriver Set

145445003
ATHH.JS5: RNCC: 3 | RNVC: 2
0500708: RNCC: 5 | RNVC: 2
AA002084: RNCC: 6 | RNVC: 9

7 Feb 2005

5120-14-447-1024
Spanner Wrench

144471024
9338: RNCC: 3 | RNVC: 2
9338: RNCC: 5 | RNVC: 9

3 May 1991

5120-14-252-4583
Electron Tube Pin Straightener

142524583
S101: RNCC: 3 | RNVC: 2
S101: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-508-1097
Final Drive Assembly Alignment Pin

145081097
F00090892: RNCC: 3 | RNVC: 2
F00090892: RNCC: 5 | RNVC: 9

26 Aug 1998

5120-14-384-6340
Electrical Card Extractor

143846340
16928967: RNCC: 3 | RNVC: 2
16928967: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-222-7551
Electronic Equipment Alignment Tool

142227551
TL385U: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-539-9245
Combination Box And Open End Wrench

145399245
37.18: RNCC: 3 | RNVC: 9
3148510987828: RNCC: 5 | RNVC: 9

20 Feb 2004

5120-14-271-6249
Spanner Wrench

142716249
E74323A80AGW: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-295-2645

5120-14-222-7157
Open End Wrench

142227157
10-30X31CM: RNCC: 3 | RNVC: 2
33-30X31: RNCC: 5 | RNVC: 2
10-30X31EC0: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-325-4513
Electrical Contact Inserter

143254513
8400-1475: RNCC: 3 | RNVC: 2
10475: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-321-1495
Craftsman's Tweezers

143211495
322: RNCC: 3 | RNVC: 2
602C: RNCC: 3 | RNVC: 9
602C: RNCC: 5 | RNVC: 2
85-679-5670: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-392-0867

5120-14-254-9838
Socket Wrench Handle

142549838
S.151: RNCC: 3 | RNVC: 2
101356: RNCC: 5 | RNVC: 2
0056760: RNCC: 5 | RNVC: 2
H24148: RNCC: 5 | RNVC: 2
3148510567600: RNCC: 5 | RNVC: 2
S151: RNCC: 5 | RNVC: 2
0110635X00: RNCC: 5 | RNVC: 2
18509491-8: RNCC: 5 | RNVC: 2
91355054: RNCC: 5 | RNVC: 2
S.151: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-212-8309

5120-14-290-7590

5120-14-536-1927
Bearing And Bushing Inserter And Remover

145361927
E92.20900.0: RNCC: 3 | RNVC: 9
SYQ3090: RNCC: 5 | RNVC: 2

15 Jul 2003

5120-14-215-2260
Cle Speciale

142152260
RT3658: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-345-3098
Spanner Wrench

143453098
055W02-519862D: RNCC: 3 | RNVC: 2
7M147D: RNCC: 3 | RNVC: 2
0519862D00: RNCC: 5 | RNVC: 2

5 Oct 1977

5120-14-565-1246
Aligning Punch Set

145651246
885519: RNCC: 3 | RNVC: 2

13 Jul 2010

5120-14-321-0833

5120-14-342-5327

5120-14-408-6764
Hand Intrenching Tool

144086764
103880: RNCC: 3 | RNVC: 2

29 Jan 1997

5120-14-301-9648
Combination Box And Open End Wrench Set

143019648
40.JN8: RNCC: 3 | RNVC: 2
40JN8: RNCC: 3 | RNVC: 2
3148515285400: RNCC: 5 | RNVC: 2
0528540: RNCC: 5 | RNVC: 9
40JN8A: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-334-0125
Pliers

143340125
206-20CP: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-308-4370
Spanner Wrench

143084370
33530B: RNCC: 3 | RNVC: 2
33530: RNCC: 5 | RNVC: 2
33530A: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-475-6345
Socket Wrench Socket

144756345
137: RNCC: 3 | RNVC: 2
1091557K00: RNCC: 5 | RNVC: 2

24 Apr 1995

5120-14-223-7381
Cle Speciale De Lun

142237381
L806-201B: RNCC: 3 | RNVC: 2
603GAT87-143: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-340-8512

5120-14-425-6798
Mechanical Puller Attachment

144256798
8811590004: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-548-4105
Cross Tip Screwdriver

145484105
ACZDH.3X150: RNCC: 3 | RNVC: 2

13 Jan 2006

5120-14-347-1220
Socket Wrench Socket

143471220
NS.11: RNCC: 3 | RNVC: 2
3148510420301: RNCC: 5 | RNVC: 2
NS11: RNCC: 5 | RNVC: 2
0042030: RNCC: 5 | RNVC: 9

19 Jan 1978

5120-14-411-0103
Clapet Extracteur

144110103
47309: RNCC: 3 | RNVC: 2

28 Jul 1986

5120-14-393-4147
Socket Head Screw Key

143934147
66-45: RNCC: 3 | RNVC: 2
89.45: RNCC: 3 | RNVC: 2
66.45: RNCC: 3 | RNVC: 2
89-45: RNCC: 5 | RNVC: 2
235-3867: RNCC: 5 | RNVC: 2
3148511268407: RNCC: 5 | RNVC: 2
3272670264564: RNCC: 5 | RNVC: 2
0695 177 961: RNCC: 5 | RNVC: 2
0126840: RNCC: 5 | RNVC: 9
FACOM89.45: RNCC: 5 | RNVC: 9

7 Apr 1984

5120-14-204-3014
Cle Speciale

142043014
M3-063: RNCC: 3 | RNVC: 2
M3-063: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-244-4145
Socket Wrench Handle

142444145
J-120: RNCC: 3 | RNVC: 2
3272670224698: RNCC: 5 | RNVC: 2
J120: RNCC: 5 | RNVC: 2
85-679-5910: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-233-4342
Cle Speciale Capots

142334342
413: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-253-3682
Levier Pour Palier

142533682
410232M3: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-223-3573

5120-14-338-9021
Open End Wrench

143389021
8811983000: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-443-1740
Tournevis Special

144431740
7-017176-2: RNCC: 3 | RNVC: 2
7-017176-2: RNCC: 5 | RNVC: 9

12 Nov 1990

5120-14-396-6244
Flat Tip Screwdriver

143966244
0-42660-4: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-252-2762
Spanner Wrench

142522762
PR46104: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-313-5435
Open End Wrench

143135435
53MA401811: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-232-6135
Socket Wrench Extension

142326135
S210: RNCC: 3 | RNVC: 2
V2-95-010: RNCC: 5 | RNVC: 2
PR26129: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-454-1840
Spanner Wrench

144541840
Y075-066-000A: RNCC: 3 | RNVC: 2

25 Mar 1992

5120-14-447-3450
Spanner Wrench

144473450
NO PRIMARY REF14-447-3450: RNCC: 3 | RNVC: 2
89280877: RNCC: 5 | RNVC: 2
402016360416: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-361-4350
Spanner Wrench

143614350
NO PRIMARY REF14-361-4350: RNCC: 3 | RNVC: 2
231257: RNCC: 5 | RNVC: 9

24 Jan 1980

5120-14-291-1843
Socket Wrench Screwdriver Attachment

142911843
JEA19-26: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-451-2682
Socket Wrench Socket

144512682
MHL237-41: RNCC: 3 | RNVC: 2
MHL237-41: RNCC: 5 | RNVC: 2

6 Nov 1991

5120-14-389-3609
Outillag De Tracage

143893609
4103E11-1220-02: RNCC: 3 | RNVC: 2
41.03.330.11.1220.02: RNCC: 5 | RNVC: 2

19 Dec 1983

5120-14-271-6105

5120-14-357-2703

5120-14-478-8690
Outillage Cle Speci

144788690
3M900003B: RNCC: 3 | RNVC: 2

28 Nov 1995

5120-14-491-2401
Cle

144912401
16397404: RNCC: 3 | RNVC: 2
16397404: RNCC: 3 | RNVC: 9
F300 0T 002 0164: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-325-0292
A Pions Cle

143250292
0S21284: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-468-9826
Seal Inserter And Remover

144689826
40N108313-1: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-200-9328
Socket Wrench Socket

142009328
S.3/4: RNCC: 3 | RNVC: 2
3148510544601: RNCC: 5 | RNVC: 2
S3-4: RNCC: 5 | RNVC: 2
0712 133 134: RNCC: 5 | RNVC: 2
0054460: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-514-6979
Socket Wrench Socket

145146979
R.3/8EL: RNCC: 3 | RNVC: 2

9 Jun 1999

5120-14-457-9976
Appareil Fonctionne

144579976
30AS49736-3A2: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-332-6573
Extracteur Clapet

143326573
45107: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-284-5340
Diabolo

142845340
K200MD: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-213-5580

5120-14-284-1931

5120-14-577-1800
Spanner Wrench

145771800
70 12 39 20 24: RNCC: 3 | RNVC: 2
20-65: RNCC: 5 | RNVC: 1

20 Aug 2013

5120-14-444-9177
Ot Positionnement

144449177
0448403D00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-274-8641
Corps Extenseur

142748641
R31674-7-18REP1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-304-6992
Anneau De Guidage

143046992
NO PRIMARY REF14-304-6992: RNCC: 3 | RNVC: 2
BL40569: RNCC: 5 | RNVC: 9
85-666-1680: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-573-2449
Socket Wrench Extension

145732449
9263400001: RNCC: 3 | RNVC: 2
3303809000576: RNCC: 5 | RNVC: 2
A251403000169: RNCC: 5 | RNVC: 2

25 Sep 2012

5120-14-416-4990
Pliers

144164990
204-18G: RNCC: 3 | RNVC: 2
3272670271432: RNCC: 5 | RNVC: 2

10 Jun 1987

5120-14-528-4540
Hand Material Handling Hook

145284540
21227696-00: RNCC: 3 | RNVC: 2
21227696-6: RNCC: 5 | RNVC: 2

30 Jan 2002

5120-14-436-7597
Montage-Demon Outil

144367597
30AM135: RNCC: 3 | RNVC: 2

3 Jan 1990

5120-14-427-0863
Outillage Mandrin

144270863
537161: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-574-2483
Socket Head Screw Key

145742483
FAHK5 044 11 P 11108: RNCC: 3 | RNVC: 2

19 Dec 2012

5120-14-251-2344

5120-14-291-2106

5120-14-248-3534

5120-14-324-8882
Elem Guide Roulemen

143248882
0-41102-4: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-208-6383

5120-14-370-4534

5120-14-541-5297
Final Drive Assembly Alignment Pin

145415297
1091612-001: RNCC: 3 | RNVC: 2

10 Jun 2004

5120-14-427-2513
Spanner Wrench

144272513
488402M84-06PN3: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-348-4429
Spanner Wrench

143484429
GSM084-008F14: RNCC: 3 | RNVC: 2
GSM084-08F14: RNCC: 5 | RNVC: 2

29 Mar 1978

5120-14-042-5883
Spanner Wrench

140425883
90890-06139: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-401-4086
Spanner Wrench

144014086
350A93-3305-20: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-432-1575
Screwdriver Bit

144321575
NO PRIMARY REF14-432-1575: RNCC: 3 | RNVC: 2
ET10: RNCC: 5 | RNVC: 2
91364599: RNCC: 5 | RNVC: 2

24 May 1989

5120-14-513-4358
Socket Head Screw Key

145134358
NO PRIMARY REF14-513-4358: RNCC: 3 | RNVC: 2
NNP 5120860703342: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-282-9198
Socket Wrench Socket

142829198
74J7: RNCC: 3 | RNVC: 2
85-679-5970: RNCC: 6 | RNVC: 9

1 Jan 1971

5120-14-454-9595
Six Point Tip Screwdriver

144549595
AEX.10X75: RNCC: 3 | RNVC: 2
3148510049854: RNCC: 5 | RNVC: 2
104-4231: RNCC: 5 | RNVC: 2
0613 463 06: RNCC: 5 | RNVC: 2
004985: RNCC: 5 | RNVC: 9
FACOMAEX.10X75: RNCC: 5 | RNVC: 9

29 Apr 1992

5120-14-350-5350
Offset Screwdriver

143505350
006-502-459: RNCC: 3 | RNVC: 2

12 Jul 1978

5120-14-427-1109
Mandrin Presse

144271109
547878: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-239-9046

5120-14-564-3171
Hand Lead Seal Press

145643171
1732M900: RNCC: 3 | RNVC: 2
91866972: RNCC: 5 | RNVC: 9

22 Apr 2010

5120-14-318-6216

5120-14-200-9489
Socket Wrench Socket

142009489
S.26: RNCC: 3 | RNVC: 2
3148510536804: RNCC: 5 | RNVC: 2
S26: RNCC: 5 | RNVC: 2
0111000C00: RNCC: 5 | RNVC: 2
91493243: RNCC: 5 | RNVC: 2
250-7373: RNCC: 5 | RNVC: 2
0712 133 126: RNCC: 5 | RNVC: 2
0053680: RNCC: 5 | RNVC: 9
FACOMS.26: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-248-1282
Pince Pose-Collier

5120-14-428-5367
De Guidage Rail

144285367
MKG3262104: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-357-2691

5120-14-386-1579
Out Posit Plateau

143861579
6801P31-1100-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-395-0754
Mise En Forme Bague

143950754
H46680: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-427-2517
Bearing And Bushing Inserter

144272517
488402M83-06PN3: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-444-9119
Moyen De Maitenance

144449119
1034581Q00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-225-4046

5120-14-319-4551

5120-14-489-0319
Combination Box And Open End Wrench

144890319
39.4H: RNCC: 3 | RNVC: 2
3148510998626: RNCC: 5 | RNVC: 2
39-4H: RNCC: 5 | RNVC: 9
0099862: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-407-0959
Socket Wrench Screwdriver Attachment

144070959
NO PRIMARY REF14-407-0959: RNCC: 3 | RNVC: 2
0059150: RNCC: 5 | RNVC: 2
ST8L: RNCC: 5 | RNVC: 2
ST.8L: RNCC: 5 | RNVC: 2

29 Jan 1986

5120-14-406-9529
Guidage Broche

144069529
853-202-181-0: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-443-0174
Maintien Outillage

144430174
30AM151: RNCC: 3 | RNVC: 2

7 Nov 1990

5120-14-272-5623

5120-14-222-7137
Open End Wrench

142227137
35-3/8: RNCC: 3 | RNVC: 2
34.3/8: RNCC: 3 | RNVC: 2
35 3-8: RNCC: 3 | RNVC: 2
34.3-8: RNCC: 5 | RNVC: 2
0183068D00: RNCC: 5 | RNVC: 2
3148510984209: RNCC: 5 | RNVC: 2
34 3-8: RNCC: 5 | RNVC: 2
3272670271425: RNCC: 5 | RNVC: 2
0098420: RNCC: 5 | RNVC: 9
35 3-8X3-8: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-306-3717
Poignee Extracteur

143063717
NO PRIMARY REF14-306-3717: RNCC: 3 | RNVC: 2
RT5254: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-268-0069
Spanner Wrench

142680069
DE48H6: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-295-1672
Joint Breaking Wedge

142951672
BBCJ100: RNCC: 3 | RNVC: 9

1 Jan 1973

5120-14-271-6248
Spanner Wrench

142716248
E74323A70AGW: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-412-4264
Spanner Wrench

144124264
BAZ51345: RNCC: 3 | RNVC: 2

15 Oct 1986

5120-14-524-8401
Screwdriver Bit

145248401
EP.002: RNCC: 3 | RNVC: 2

20 Apr 2001

5120-14-364-9926

5120-14-378-2376

5120-14-448-4592
Open End Wrench

144484592
0102451: RNCC: 3 | RNVC: 1
44A 24X26: RNCC: 5 | RNVC: 9

26 Jun 1991

5120-14-577-6900
Socket Head Screw Key Set

145776900
262114489: RNCC: 3 | RNVC: 2

3 Oct 2013

5120-14-421-1747
Anti-Rotation Bague

144211747
103620: RNCC: 3 | RNVC: 2

6 Jan 1988

5120-14-316-6633

5120-14-231-7219
Broche De Centrage

142317219
9970-125-017: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-226-3113
Cle De Blocage Spec

142263113
60290-01-03-020M1: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-517-9360
Six Point Tip Screwdriver

145179360
ENFD6577-15X40: RNCC: 3 | RNVC: 2

19 Jan 2000

5120-14-220-7875
Open End Wrench

142207875
71-42: RNCC: 3 | RNVC: 2
10A42: RNCC: 5 | RNVC: 2
10A42: RNCC: 5 | RNVC: 2
RACC42: RNCC: 5 | RNVC: 2
71-42: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-417-9883
Premontage Bloc

144179883
VOMO06SX: RNCC: 3 | RNVC: 2
VOMO06SX: RNCC: 3 | RNVC: 9
101745: RNCC: 5 | RNVC: 2
V0M06S: RNCC: 5 | RNVC: 2
V0M06S: RNCC: 5 | RNVC: 9

6 Aug 1987

5120-14-493-0042
Cle

144930042
4065 030 000 415: RNCC: 3 | RNVC: 2
F300 0T 009 4377: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-319-4918

5120-14-372-2856
Element Pince

143722856
302994: RNCC: 3 | RNVC: 2

1 Sep 1981

5120-14-575-1364
Torque Wrench Adapter

145751364
14100105412: RNCC: 3 | RNVC: 2

15 Mar 2013

5120-14-353-9395
Sertisseur-Extracte

143539395
02640906500: RNCC: 3 | RNVC: 2
026409065: RNCC: 5 | RNVC: 2

16 Jan 1979

5120-14-395-0279
Equipe Plateau

143950279
853-201-285-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-560-8887
Torque Wrench

145608887
R.208-25: RNCC: 3 | RNVC: 2
3148517303379: RNCC: 5 | RNVC: 2

28 May 2009

5120-14-274-8546
Open End Wrench

142748546
E74301C46UJW: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-227-8923
Retaining Ring Pliers

142278923
ST5125: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-458-5743
Plaque De Levage

144585743
DLT057058: RNCC: 3 | RNVC: 2

27 Oct 1992

5120-14-285-4488
Socket Head Screw Key

142854488
ES5258: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-357-9965
Etanchei Controleur

143579965
MKC253-21: RNCC: 3 | RNVC: 2
MKC253-21: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-245-9066
Collier Pour Evasem

142459066
7062BA1C0LLIERT2-10: RNCC: 3 | RNVC: 9

1 Jan 1968

5120-14-571-5268
Combination Box And Open End Wrench Set

145715268
9000000401: RNCC: 3 | RNVC: 2

3 Apr 2012

5120-14-263-8210

5120-14-386-9725
Appareil De Calage

143869725
26545931000: RNCC: 3 | RNVC: 2
ASSY145010: RNCC: 5 | RNVC: 2
265459310: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-393-4108
Flat Tip Screwdriver

143934108
AGH10X250: RNCC: 3 | RNVC: 2

7 Apr 1984

5120-14-437-8627
Socket Head Screw Key

144378627
16380149: RNCC: 3 | RNVC: 2
16380149: RNCC: 5 | RNVC: 9

21 Feb 1990

5120-14-533-6951
Socket Wrench Extension

145336951
NK.209: RNCC: 3 | RNVC: 2
3148510375502: RNCC: 5 | RNVC: 2

19 Feb 2003

5120-14-249-3952
Guide Axe Darticula

142493952
3210-97-33-130: RNCC: 3 | RNVC: 2
08-300A: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-311-4582
Spanner Wrench

143114582
3130S95-12-001-2: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-221-6812
Cle Pour Ecrou De B

142216812
3130S95-12-006: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-389-8341
Arbre Manivel Outil

143898341
26545905700: RNCC: 3 | RNVC: 2
265459057: RNCC: 5 | RNVC: 2
265459057: RNCC: 5 | RNVC: 9

20 Dec 1983

5120-14-575-2682
Special Purpose Combination Wrench

145752682
25-30: RNCC: 3 | RNVC: 2

25 Mar 2013

5120-14-201-8795
Open End Wrench

142018795
10-32X34: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-371-4832
Spanner Wrench

143714832
6BFC20000AJ005: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-352-7183
Cambreur De Ressort

143527183
C345919: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-263-8205

5120-14-490-6929
File

144906929
241 F 01270 000: RNCC: 3 | RNVC: 2
F300 0T 000 1059: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-490-6851
Drill

144906851
240 D 01015 000: RNCC: 3 | RNVC: 2
F300 0T 000 0955: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-381-5249
Joint A Huile Outil

143815249
6294000X: RNCC: 3 | RNVC: 2
10299: RNCC: 5 | RNVC: 2

25 Jan 1983

5120-14-529-3757
Vis A Fen Tournevis

5120-14-274-7771
Flat Tip Screwdriver

142747771
E74-351-0-8X5X100BAI0NNETTE: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-569-0337
Spring Inserter And Remover

145690337
F27378000-1: RNCC: 3 | RNVC: 2
F27378000: RNCC: 3 | RNVC: 9
F27378000: RNCC: 5 | RNVC: 9

1 Aug 2011

5120-14-270-9963
Socket Wrench Adapter-Extension

142709963
NO PRIMARY REF14-270-9963: RNCC: 3 | RNVC: 2
91352507: RNCC: 5 | RNVC: 2
K213: RNCC: 5 | RNVC: 2
706-6: RNCC: 5 | RNVC: 2
91352507: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-274-0830
Socket Head Screw Key

142740830
638: RNCC: 3 | RNVC: 2
0124080: RNCC: 3 | RNVC: 2
63-8: RNCC: 3 | RNVC: 2
130182: RNCC: 5 | RNVC: 2
83-8: RNCC: 5 | RNVC: 2
83.8: RNCC: 5 | RNVC: 2
3272670228139: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-328-1076
Spanner Wrench

143281076
HTLT406755P0001: RNCC: 3 | RNVC: 2
VTR400-1111DR0ITE: RNCC: 5 | RNVC: 2
VTR401-2-1111DROITE: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-416-7577
Mandrin Presse

144167577
537423: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-399-9483
Socket Head Screw Key

143999483
601520: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-361-8438
Mechanical Puller Attachment

143618438
8812053002: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-531-1214
Open End Wrench

145311214
13A20X21: RNCC: 3 | RNVC: 2

24 Jul 2002

5120-14-488-3156
Flat Tip Screwdriver

144883156
AZF.10X200: RNCC: 3 | RNVC: 2
0013434: RNCC: 5 | RNVC: 2
3148510134345: RNCC: 5 | RNVC: 2
AZF10X200: RNCC: 5 | RNVC: 2
1126686F00: RNCC: 5 | RNVC: 2
91816645: RNCC: 5 | RNVC: 2
250-5800: RNCC: 5 | RNVC: 2
FACOMAZF.10X200: RNCC: 5 | RNVC: 9

30 Apr 1997

5120-14-201-8786
Open End Wrench

142018786
10-14X16: RNCC: 3 | RNVC: 2
JGA12-22: RNCC: 3 | RNVC: 2
ELPED21E11E2: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-284-1958
Decolleur

142841958
NO PRIMARY REF14-284-1958: RNCC: 3 | RNVC: 2
U53M: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-321-9917
Cle Vis De Bielle

143219917
02640901100: RNCC: 3 | RNVC: 2
026409011: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-490-8979
Boite

144908979
4067 990 001 874: RNCC: 3 | RNVC: 2
F300 0T 000 5272: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-254-9804
Open End Wrench

142549804
4062-35: RNCC: 3 | RNVC: 9
E74301C35AGL: RNCC: 5 | RNVC: 2
RT7312: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-406-6265
Face Spanner Wrench Socket

144066265
853-100-148-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-463-9785
Socket Wrench Socket

144639785
854-500-337-0: RNCC: 3 | RNVC: 2

7 Jul 1993

5120-14-574-4950
Ratchet Wrench

145744950
467.27: RNCC: 3 | RNVC: 2
67.27: RNCC: 3 | RNVC: 9
3148518201995: RNCC: 5 | RNVC: 2
820199: RNCC: 5 | RNVC: 2
3148517413276: RNCC: 5 | RNVC: 9
741327: RNCC: 5 | RNVC: 9

23 Jan 2013

5120-14-298-1625

5120-14-491-0243
Serre B

144910243
4602 013 300 001: RNCC: 3 | RNVC: 2
F300 0T 001 1040: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-573-8653
Socket Wrench Socket

145738653
S.12HLA: RNCC: 3 | RNVC: 2

16 Nov 2012

5120-14-483-1429
Conique Douille

144831429
0U144143-2: RNCC: 3 | RNVC: 2
0U144143-2: RNCC: 5 | RNVC: 2
0U144143-2: RNCC: 5 | RNVC: 9

15 Aug 1996

5120-14-482-1555
Cle A Doui Rallonge

5120-14-416-7552
Mandrin Presse

144167552
537395: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-456-6067
Retaining Ring Pliers

144566067
475A.15: RNCC: 3 | RNVC: 2
0242591Y00: RNCC: 5 | RNVC: 2
3148511782019: RNCC: 5 | RNVC: 2
0178201: RNCC: 5 | RNVC: 9
14-426-6719: RNCC: 6 | RNVC: 9

9 Jul 1992

5120-14-382-5517
Electrical Card Extractor

143825517
NO PRIMARY REF14-382-5517: RNCC: 3 | RNVC: 2
20326886: RNCC: 5 | RNVC: 9

17 Feb 1983

5120-14-571-3111
Flat Tip And Cross Tip Screwdriver Set

145713111
MOD.A1VE: RNCC: 3 | RNVC: 2
FACOM MOD.A1VE: RNCC: 5 | RNVC: 2

13 Mar 2012

5120-14-255-6423
Cle Speciale

142556423
Y085-001-000: RNCC: 3 | RNVC: 2
80900-330: RNCC: 5 | RNVC: 2
Y085-001: RNCC: 5 | RNVC: 2
78993: RNCC: 5 | RNVC: 2

1 Jan 1969

5120-14-501-0230
Socket Head Screw Key

145010230
89S.50: RNCC: 3 | RNVC: 2
3148511269848: RNCC: 5 | RNVC: 2
89S-50: RNCC: 5 | RNVC: 2
89S50: RNCC: 5 | RNVC: 2
F300 0T 025 0528: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-409-3089
Plaque Retourn Bati

144093089
DLP751342: RNCC: 3 | RNVC: 2

27 May 1986

5120-14-231-2177
Retaining Ring Pliers

142312177
42C: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-522-7486
Poussoir De Siege

145227486
MAT171-0435F5: RNCC: 3 | RNVC: 2

20 Nov 2000

5120-14-302-4838
Bague Demmanchement

143024838
3130S95-47-011: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-527-2963
Outil De Demontage

145272963
28116: RNCC: 3 | RNVC: 9

19 Oct 2001

5120-14-524-9214
Socket Head Screw Key

145249214
21423371-00: RNCC: 3 | RNVC: 2
21423371-6: RNCC: 5 | RNVC: 2

3 May 2001

5120-14-356-2905
Spanner Wrench

143562905
3919051: RNCC: 3 | RNVC: 2
3919-051: RNCC: 5 | RNVC: 2

25 Apr 1979

5120-14-240-0122
Barre De Retenue

142400122
B0044BB52AREP4: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-204-8888

5120-14-031-3159
Broche Coudee

140313159
1051: RNCC: 3 | RNVC: 2

14 Jun 1980

5120-14-563-2423
Socket Head Screw Key

145632423
522384: RNCC: 3 | RNVC: 2
14100076313: RNCC: 5 | RNVC: 2

18 Jan 2010

5120-14-416-7516
Maintien Outil

144167516
537281: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-232-6818

5120-14-226-0020

5120-14-236-2614

5120-14-340-5661
Outil Instal Ressor

143405661
M01632-1: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-385-8907
Spanner Wrench

143858907
0.411/60152: RNCC: 3 | RNVC: 2
0411-60152: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-569-8827
Seal Inserter

145698827
R5370: RNCC: 3 | RNVC: 2
40008081: RNCC: 5 | RNVC: 2

26 Oct 2011

5120-14-222-7147

5120-14-516-8009
Gabarit

145168009
5001008738: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-285-1185

5120-14-444-3189
Combination Box And Open End Box Wrench

144443189
GS130-06: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-475-9380
Adaptateur Cannele

144759380
MAT171-0435F25: RNCC: 3 | RNVC: 2

11 May 1995

5120-14-364-4093
Ense Montage Piston

143644093
UHN232-41: RNCC: 3 | RNVC: 2
MHN232-41: RNCC: 5 | RNVC: 2

7 Aug 1980

5120-14-304-3139
Cone Mise En Forme

143043139
S16-0605-0601: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-386-1588
Bearing And Bushing Inserter

143861588
6801P32-1677-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-201-5524
Poincon A Chev Lame

142015524
NO PRIMARY REF14-201-5524: RNCC: 3 | RNVC: 2
109-6: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-200-4961

5120-14-274-3582

5120-14-295-2505
Bearing And Bushing Inserter

142952505
172118: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-490-0617
Flat Tip Screwdriver

144900617
AY.10X150VE: RNCC: 3 | RNVC: 2
3148510130576: RNCC: 5 | RNVC: 2
0012864: RNCC: 5 | RNVC: 2
3148510128641: RNCC: 5 | RNVC: 9
AY10X150VSE: RNCC: 5 | RNVC: 9

10 Sep 1997

5120-14-418-5790
Open End Wrench

144185790
70-8X10: RNCC: 3 | RNVC: 2
3272670207141: RNCC: 5 | RNVC: 2

2 Sep 1987

5120-14-459-3264
Socket Head Screw Key

144593264
OS22695: RNCC: 3 | RNVC: 2
OS22695: RNCC: 5 | RNVC: 9

25 Nov 1992

5120-14-505-9393
Flat Tip Screwdriver

145059393
ENFD6516-A1X5-5X200X305: RNCC: 3 | RNVC: 2
F300 0P 000 1296: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-262-9719
Cle Blocage Bride

142629719
6800-2110: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-222-7401
Open End Wrench

142227401
11-1 1-16X1 1-4: RNCC: 3 | RNVC: 2
39CP1 1-16X1 1-4: RNCC: 3 | RNVC: 2
522-1 1-16X1 1-4: RNCC: 3 | RNVC: 9
DEM522-1 1-16X1 1-4: RNCC: 5 | RNVC: 9
VIR39CP1 1-16X1 1-4: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-232-6312

5120-14-501-5352
Tube Cremailliere

145015352
SE108BE34: RNCC: 3 | RNVC: 2

3 Nov 1997

5120-14-490-8780
Rallong

144908780
4065 180 000 580: RNCC: 3 | RNVC: 2
F300 0T 000 5043: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-510-7162
Socket Wrench Screwdriver Attachment

145107162
SHP.6L: RNCC: 3 | RNVC: 2
SHP6L: RNCC: 5 | RNVC: 2

9 Nov 1998

5120-14-526-3698
Detent Handling Tool

145263698
132207: RNCC: 3 | RNVC: 2

25 Jul 2001

5120-14-553-6564
Flat Tip And Cross Tip Screwdriver Set

145536564
MOD.AZ2: RNCC: 3 | RNVC: 2

2 May 2007

5120-14-223-9368

5120-14-285-5294

5120-14-286-7802

5120-14-412-7741
Extracteur

144127741
NO PRIMARY REF14-412-7741: RNCC: 3 | RNVC: 2
H140AMV205M: RNCC: 5 | RNVC: 9

5 Nov 1986

5120-14-232-7889
Flat Tip Screwdriver

142327889
E74-351-0-8X5X150BAI0NNETTE: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-413-8055
Hand Terminal Crimping Tool

144138055
AD-7-017: RNCC: 3 | RNVC: 9

15 Jan 1987

5120-14-202-9696

5120-14-217-9969

5120-14-234-3339
Extracteur

142343339
202495: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-220-8557
Adaptateur Special

142208557
PR46665: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-247-1645
Bloc De Presertissa

142471645
PS12K: RNCC: 3 | RNVC: 2
P4PS12K: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-447-3446
Spanner Wrench

144473446
NO PRIMARY REF14-447-3446: RNCC: 3 | RNVC: 2
89280903: RNCC: 5 | RNVC: 2
300A98810-1: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-493-9090
Plateau

144939090
NO PRIMARY REF14-493-9090: RNCC: 3 | RNVC: 2
5000265011: RNCC: 5 | RNVC: 9
F300 0T 014 5316: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-437-1607
Elingage Outillage

144371607
27386514-9: RNCC: 3 | RNVC: 2
SG-AX094: RNCC: 5 | RNVC: 2

17 Jan 1990

5120-14-412-7743
Support Controle

144127743
NO PRIMARY REF14-412-7743: RNCC: 3 | RNVC: 2
H150AFV209M: RNCC: 5 | RNVC: 9

5 Nov 1986

5120-14-374-0678
Bearing Staking Installation Tool

143740678
330A98-2045-01: RNCC: 3 | RNVC: 2
330A-98-2045-01: RNCC: 5 | RNVC: 2

8 Dec 1981

5120-14-440-6793
Mechanical Puller Attachment

144406793
332A93-3604-11: RNCC: 3 | RNVC: 2

18 Jul 1990

5120-14-498-0836
Burin

144980836
NO PRIMARY REF14-498-0836: RNCC: 3 | RNVC: 2
2 609 500: RNCC: 5 | RNVC: 9
2 609 500: RNCC: 5 | RNVC: 9
F300 0T 002 6396: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-561-8167
Dashpot Handling Tool

145618167
39388948: RNCC: 3 | RNVC: 2

9 Sep 2009

5120-14-223-9349

5120-14-389-2228
Acces Purge Outil

143892228
TM20H12003: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-215-2448

5120-14-227-9599

5120-14-567-5368
Hand Hammer

145675368
BONGO P27: RNCC: 3 | RNVC: 2
RA4980: RNCC: 5 | RNVC: 2

23 Mar 2011

5120-14-232-8703

5120-14-234-3375

5120-14-559-6081
Mechanical Puller

145596081
8811509000: RNCC: 3 | RNVC: 2

2 Feb 2009

5120-14-347-8707

5120-14-438-4980
Torque Wrench Adapter

144384980
MHB400-21: RNCC: 3 | RNVC: 2
85-694-0415: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-388-2329
Socket Wrench Handle Bar

143882329
VTR501-2-11431: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-537-1268
Socket Wrench Socket

145371268
J.7/16H: RNCC: 3 | RNVC: 2
3148510279565: RNCC: 5 | RNVC: 2

1 Oct 2003

5120-14-335-5367
Extracteur Deux Cro

143355367
NO PRIMARY REF14-335-5367: RNCC: 3 | RNVC: 2
11484-4: RNCC: 5 | RNVC: 9
85-689-1172: RNCC: 6 | RNVC: 9

30 Jun 1976

5120-14-255-2930
Spanner Wrench

142552930
268: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-551-0287
Adjustable Wrench

145510287
113A.12CG: RNCC: 3 | RNVC: 2
113A.12CG: RNCC: 5 | RNVC: 2

22 Aug 2006

5120-14-332-9134
Socket Head Screw Key Blade

143329134
468708: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-226-3739

5120-14-205-8243

5120-14-228-5934

5120-14-297-6099
Traceur De Carenage

142976099
AHYARM38-0: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-530-1991
Socket Wrench Handle

145301991
J.222: RNCC: 3 | RNVC: 2
CAE00922: RNCC: 5 | RNVC: 2
3148510289540: RNCC: 5 | RNVC: 2

22 May 2002

5120-14-379-7859
Pinceau Queue Morue

143797859
16490853-1: RNCC: 3 | RNVC: 2

20 Oct 1982

5120-14-338-4775
Faux Mor Demi-Coqui

143384775
C46305-1: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-202-0352
Rembourroir

142020352
871-5: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-329-3072
Cle A Panier

143293072
GSM196-010F72: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-429-8246
Screwdriver Bit

144298246
EX.125: RNCC: 3 | RNVC: 2
1780550056: RNCC: 5 | RNVC: 2
3148510258157: RNCC: 5 | RNVC: 2
1059140E00: RNCC: 5 | RNVC: 2
162-7729: RNCC: 5 | RNVC: 2
0614 311 5: RNCC: 5 | RNVC: 2
0614 312 5: RNCC: 5 | RNVC: 2
2695 725: RNCC: 5 | RNVC: 2
0025815: RNCC: 5 | RNVC: 9
FACOMEX.125: RNCC: 5 | RNVC: 9

14 Feb 1989

5120-14-321-1522
Open End Wrench

143211522
NO PRIMARY REF14-321-1522: RNCC: 3 | RNVC: 2
13 11-16X7-8: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-288-5696
Craftsman's Tweezers

142885696
366: RNCC: 3 | RNVC: 2
SYB0317: RNCC: 5 | RNVC: 2
602: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-446-7989
Crochet Pour Ruban

144467989
CH93-3-4: RNCC: 3 | RNVC: 2

16 Apr 1991

5120-14-281-7828
Cle Speciale

142817828
A127928: RNCC: 3 | RNVC: 2
100217: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-575-0583
Pliers

145750583
CM 404003: RNCC: 3 | RNVC: 2

11 Mar 2013

5120-14-285-6234

5120-14-491-0143
Cle

144910143
4602 007 200 076: RNCC: 3 | RNVC: 2
F300 0T 001 0929: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-550-8473
Socket Head Screw Key Set

145508473
84TC.JE5: RNCC: 3 | RNVC: 2

20 Jul 2006

5120-14-452-1121
Spanner Wrench

144521121
45535113: RNCC: 3 | RNVC: 2

18 Dec 1991

5120-14-416-7551
Mandrin Presse

144167551
537394: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-256-8900

5120-14-470-6848
Outil De Reglage

144706848
39605074: RNCC: 3 | RNVC: 2

29 Jun 1994

5120-14-503-3236
Ensemble Imal

145033236
12060: RNCC: 3 | RNVC: 2

9 Jan 1998

5120-14-557-5556
Vise Jaw Caps

145575556
1223.M6: RNCC: 3 | RNVC: 2
0225728: RNCC: 5 | RNVC: 2
3148512257288: RNCC: 5 | RNVC: 2

20 Jun 2008

5120-14-575-0312
Mechanical Puller

145750312
62032821AA: RNCC: 3 | RNVC: 2

7 Mar 2013

5120-14-291-8144
Socket Wrench Socket

142918144
0055330: RNCC: 3 | RNVC: 2
S.15L: RNCC: 5 | RNVC: 2
S15L: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-331-7477
Etrier Regl Pil Aut

143317477
330A98-7542-00: RNCC: 3 | RNVC: 2
321-98-7542-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-233-6084

5120-14-572-1720
Seal Remover

145721720
735490: RNCC: 3 | RNVC: 2

12 Jun 2012

5120-14-435-5946
Cle De Serrage

144355946
8814329002: RNCC: 3 | RNVC: 2

8 Nov 1989

5120-14-242-4631

5120-14-561-3031
Socket Wrench Adapter

145613031
98AMS172341002: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-14-450-7486
Cross Tip Screwdriver

144507486
NO PRIMARY REF14-450-7486: RNCC: 3 | RNVC: 2
EPH0.4X75: RNCC: 5 | RNVC: 9
643150: RNCC: 5 | RNVC: 9

22 Oct 1991

5120-14-248-7443
Joint Chargeur

142487443
G1-15-007: RNCC: 3 | RNVC: 2
G1-15007: RNCC: 5 | RNVC: 2
G1-15007: RNCC: 5 | RNVC: 2
G1-15-007: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-437-7890
Clef Bosse Guerigny

144377890
BN311545M7REP10: RNCC: 3 | RNVC: 2
GY18244C/100: RNCC: 5 | RNVC: 2

20 Feb 1990

5120-14-204-4431
Cle Pour Impulseurs

142044431
Y065-005: RNCC: 3 | RNVC: 2
78576-101: RNCC: 5 | RNVC: 2
80900-190: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-270-6424

5120-14-458-3095
Bearing And Bushing Inserter And Remover

144583095
45056133: RNCC: 3 | RNVC: 2
45056133: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-573-8650
Hand Hammer

145738650
860H.40: RNCC: 3 | RNVC: 2

16 Nov 2012

5120-14-259-2652
Spanner Wrench

142592652
0U12831: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-530-2531
Plier Type Eyelet Punch

145302531
1596M12: RNCC: 3 | RNVC: 2
1596M12: RNCC: 5 | RNVC: 2

24 May 2002

5120-14-491-7679
Cliquet

144917679
NO PRIMARY REF14-491-7679: RNCC: 3 | RNVC: 2
120090-403: RNCC: 5 | RNVC: 9
F300 0T 004 1832: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-492-6811
Cle

144926811
NO PRIMARY REF14-492-6811: RNCC: 3 | RNVC: 2
NNP5120929203202: RNCC: 5 | RNVC: 2
1788: RNCC: 5 | RNVC: 9
F300 0T 008 5127: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-395-0278
Maintien Montage

143950278
853-200-372-0: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-245-2085
Electrical Contact Remover

142452085
M15515-16: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-400-7384
Caisse Outill Bord

144007384
2-32336-00: RNCC: 3 | RNVC: 2

20 May 1985

5120-14-393-0534
Open End Wrench

143930534
CM136-81ST02: RNCC: 3 | RNVC: 2
13681ST02: RNCC: 3 | RNVC: 9

12 Apr 1984

5120-14-216-4180
Socket Wrench Crowfoot Attachment

142164180
300236: RNCC: 3 | RNVC: 2
V2-95-578: RNCC: 5 | RNVC: 2
100-140A: RNCC: 5 | RNVC: 2
100-40A: RNCC: 5 | RNVC: 2
140: RNCC: 5 | RNVC: 2
140A: RNCC: 5 | RNVC: 2
300236: RNCC: 5 | RNVC: 2
DIAMETRE40ASERIE100: RNCC: 5 | RNVC: 2
V2-95-578: RNCC: 5 | RNVC: 2
W0F140A: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-317-7970
Spanner Wrench

143177970
NO PRIMARY REF14-317-7970: RNCC: 3 | RNVC: 2
842881-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-485-7357
Mechanical Puller Attachment

144857357
332A93-3691-21: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-220-8199
Open End Wrench

142208199
BB80-16X19: RNCC: 3 | RNVC: 9
01417336: RNCC: 5 | RNVC: 2
91471069: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-491-0215
Lissoir

144910215
4602 011 200 003: RNCC: 3 | RNVC: 2
F300 0T 001 1010: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-438-8789
Electrical Connector Inserter

144388789
0855652G00: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-528-2342
Piston Ring Expander

145282342
25145900002: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-14-316-5021
Spanner Wrench

143165021
0U50113: RNCC: 3 | RNVC: 2
50113: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-396-1829
Quick Adjusting Screw Clamp

143961829
4109006: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-444-3477
Socket Wrench Socket

144443477
GS86L-02: RNCC: 3 | RNVC: 2

9 Jan 1991

5120-14-513-4341
Socket Head Screw Key

145134341
NO PRIMARY REF14-513-4341: RNCC: 3 | RNVC: 2
NNP 5120860703216: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-482-1960
Spanner Wrench

144821960
LN324-017-F5: RNCC: 3 | RNVC: 2
RAB9371: RNCC: 5 | RNVC: 2

26 Jun 1996

5120-14-379-0705
Mechanical Puller Attachment

143790705
365A93-3111-10: RNCC: 3 | RNVC: 2

6 Sep 1982

5120-14-443-8505
Socket Wrench Handle

144438505
S.154: RNCC: 3 | RNVC: 2
1068342N00: RNCC: 5 | RNVC: 2
3148510568300: RNCC: 5 | RNVC: 2
S154: RNCC: 5 | RNVC: 2
0056830: RNCC: 5 | RNVC: 9

10 Dec 1990

5120-14-229-1754
Tube Pour Broches E

142291754
12506774: RNCC: 3 | RNVC: 2
12506774: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-223-5352
Cle Pour Ecrou A En

142235352
044BBC4BBF4AREP8: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-573-4625
C Installation Tool

145734625
9622DT920: RNCC: 3 | RNVC: 2

15 Oct 2012

5120-14-219-2195
Cle Speciale Pour E

142192195
PR46970: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-454-2944
Sertissag Outillage

144542944
MMG070-29: RNCC: 3 | RNVC: 2
MMG070-29: RNCC: 5 | RNVC: 2

26 Mar 1992

5120-14-283-2197
Outil Multiple

142832197
NO PRIMARY REF14-283-2197: RNCC: 3 | RNVC: 2
0UTILMULTIPLETR0USSEREPARSKI: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-430-3475
Clapet Extracteur

144303475
RT34734: RNCC: 3 | RNVC: 2

15 Mar 1989

5120-14-242-0942

5120-14-508-7298
Spanner Wrench

145087298
300A96996: RNCC: 3 | RNVC: 2
300A96996: RNCC: 5 | RNVC: 2

29 Sep 1998

5120-14-303-5915

5120-14-559-9256
Socket Wrench Socket

145599256
DM.370: RNCC: 3 | RNVC: 2
3148510199405: RNCC: 5 | RNVC: 2
19940: RNCC: 5 | RNVC: 2

5 Mar 2009

5120-14-276-3246
Screwdriver Bit

142763246
NO PRIMARY REF14-276-3246: RNCC: 3 | RNVC: 2
C0PSAT1875L18: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-507-2640
Socket Wrench Socket

145072640
AER331151: RNCC: 3 | RNVC: 2
AER331-151: RNCC: 5 | RNVC: 2

24 Jun 1998

5120-14-357-4314
Flat Tip Screwdriver

143574314
AFR.5X150: RNCC: 3 | RNVC: 2
0613 170 5: RNCC: 5 | RNVC: 2
3148510056500: RNCC: 5 | RNVC: 2
AFR5X150: RNCC: 5 | RNVC: 2
0165116G00: RNCC: 5 | RNVC: 2
91531488: RNCC: 5 | RNVC: 2
162-5903: RNCC: 5 | RNVC: 2
FACOMAFR.5X150: RNCC: 5 | RNVC: 9
0005650: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-317-0480
Spanner Wrench

143170480
RT5845: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-526-0470
Turnlock Fastener Inserter And Remover

145260470
ST159-2M331A2: RNCC: 3 | RNVC: 2

28 Jun 2001

5120-14-316-5921
Meche Dextraction

143165921
32968: RNCC: 3 | RNVC: 9
32968: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-463-3286
Flexible Aimante Po

144633286
0000059102: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-220-8525
Tire Repair Valve Holding Tool

142208525
PR1-46498: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-363-9845
Seal Inserter And Remover

143639845
330A93-2027-00: RNCC: 3 | RNVC: 2

7 Aug 1980

5120-14-386-7841
Hand Terminal Crimping Tool

143867841
DF57-064-01: RNCC: 3 | RNVC: 2
9DF57-064-01: RNCC: 5 | RNVC: 2
DF57-064-01: RNCC: 5 | RNVC: 2

24 Aug 1983

5120-14-357-9933
Socket Wrench Socket

143579933
MHN231-22: RNCC: 3 | RNVC: 2
MHN231-22: RNCC: 5 | RNVC: 2

20 Jul 1979

5120-14-443-8025
Flasque Darret

144438025
D12501-040-04: RNCC: 3 | RNVC: 2

5 Dec 1990

5120-14-297-0546
Manchon Poussoir

142970546
007-02M4: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-329-6394

5120-14-317-0303

5120-14-564-9478
Cross Tip Screwdriver

145649478
AND1X35: RNCC: 3 | RNVC: 2
773775: RNCC: 5 | RNVC: 2

21 Jun 2010

5120-14-571-2262
Crimping Tool Die

145712262
985921: RNCC: 3 | RNVC: 2
FACOM 985921: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-14-246-2297

5120-14-330-3084

5120-14-240-6139

5120-14-297-1114
Face Spanner Wrench Socket

142971114
363A40-300000-0000: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-336-2213
Appui De Mat

143362213
3160S95-68-009: RNCC: 3 | RNVC: 2
85-100-3223: RNCC: 6 | RNVC: 9

24 Jul 1976

5120-14-512-4436
Poincon De Demontag

145124436
NO PRIMARY REF14-512-4436: RNCC: 3 | RNVC: 2
SPT10GT1228: RNCC: 5 | RNVC: 2

16 Feb 1999

5120-14-261-7662
Spanner Wrench

142617662
536-414-022H: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-561-3026
Torque Wrench Set

145613026
98F71201001022: RNCC: 3 | RNVC: 2

2 Jul 2009

5120-14-395-1876

5120-14-228-5908
Wrench Extension Handle

142285908
NO PRIMARY REF14-228-5908: RNCC: 3 | RNVC: 2
285-34B: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-437-3572
Spanner Wrench

144373572
J00650-01S140P012: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-511-7927
Craftsman's Tweezers

145117927
150.C1: RNCC: 3 | RNVC: 2
150C1: RNCC: 5 | RNVC: 2

20 Jan 1999

5120-14-351-9460
Socket Head Screw Key

143519460
07917-3230000: RNCC: 3 | RNVC: 2
07917-3230000: RNCC: 5 | RNVC: 2

16 Oct 1978

5120-14-254-7136
Socket Wrench Socket

142547136
410085M: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-447-3967
Bearing And Bushing Inserter And Remover

144473967
U.49D4: RNCC: 3 | RNVC: 2
U.49 D4: RNCC: 5 | RNVC: 2
U49D4: RNCC: 5 | RNVC: 2
91719224: RNCC: 5 | RNVC: 2
3148510702360: RNCC: 5 | RNVC: 2
0070236: RNCC: 5 | RNVC: 9

15 May 1991

5120-14-511-0304
Socket Head Screw Key

145110304
84TZS.5: RNCC: 3 | RNVC: 2
3148511257234: RNCC: 5 | RNVC: 2

25 Nov 1998

5120-14-355-4017
Socket Head Screw Key

143554017
27323123-6: RNCC: 3 | RNVC: 2
16491457: RNCC: 5 | RNVC: 2

19 Mar 1979

5120-14-462-1712
Dispositif Por Pign

144621712
7-010336-7: RNCC: 3 | RNVC: 2
7-010336-7: RNCC: 5 | RNVC: 9

13 Apr 1993

5120-14-529-1899
Montage Chemise Arb

145291899
9992000-1: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-391-6519
Pompe A Dessouder

143916519
839-3: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-483-6038
Spanner Wrench

144836038
LU-F1 91 31-E: RNCC: 3 | RNVC: 2
F300 0T 020 6521: RNCC: 6 | RNVC: 9

24 Sep 1996

5120-14-483-1207
Socket Wrench Socket

144831207
J.11/16F: RNCC: 3 | RNVC: 2
3148510279121: RNCC: 5 | RNVC: 2
0027912: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-343-8358

5120-14-208-6287

5120-14-349-6042
Tube Pour Debut Inj

143496042
216034: RNCC: 3 | RNVC: 2

22 May 1978

5120-14-491-9350
Cle

144919350
229563A: RNCC: 3 | RNVC: 2
F300 0T 006 1223: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-486-5686
Outil

144865686
RT22433: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-469-9280
Bearing And Bushing Inserter

144699280
16849348: RNCC: 3 | RNVC: 2
16849348: RNCC: 5 | RNVC: 9

18 May 1994

5120-14-511-8861

5120-14-415-9035
Equipe Corps

144159035
TH20S100: RNCC: 3 | RNVC: 2

26 May 1987

5120-14-285-3443

5120-14-491-5966
Cle

144915966
CM245: RNCC: 3 | RNVC: 2
F300 0T 003 5579: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-577-6346
Drift

145776346
2T93227-00: RNCC: 3 | RNVC: 2

1 Oct 2013

5120-14-573-9329
Socket Wrench Handle

145739329
475510G: RNCC: 3 | RNVC: 2
475510G: RNCC: 5 | RNVC: 2
475510G: RNCC: 5 | RNVC: 2

21 Nov 2012

5120-14-229-2425

5120-14-243-1765
Extracteur Pour Car

142431765
8051916: RNCC: 3 | RNVC: 2
8051916: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-541-8996
Plug Electrical Connector Extractor

145418996
61399235AA: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-260-3444

5120-14-359-9391
Speciale Cle

143599391
J00790-06-1000P012: RNCC: 3 | RNVC: 2

15 Oct 1979

5120-14-253-3686
Levier Pour Palier

142533686
410234M7: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-493-0050
Cle

144930050
4065 030 000 711: RNCC: 3 | RNVC: 2
F300 0T 009 4393: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-263-2230

5120-14-284-9925

5120-14-324-8875

5120-14-557-2814
Hand Terminal Crimping Tool

145572814
985899: RNCC: 3 | RNVC: 2

29 May 2008

5120-14-342-3617

5120-14-202-9284

5120-14-409-5101
Patte Retenue Pose

144095101
8812517000: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-432-7919
Porte-Outil Crochet

144327919
0341587: RNCC: 3 | RNVC: 2
CKS.65A: RNCC: 3 | RNVC: 2
3148513415045: RNCC: 5 | RNVC: 2
CKS.65: RNCC: 5 | RNVC: 2
CKS65: RNCC: 5 | RNVC: 2
0960 046 181: RNCC: 5 | RNVC: 2

27 Jun 1989

5120-14-559-8111
Socket Wrench

145598111
6717 51: RNCC: 3 | RNVC: 2

18 Feb 2009

5120-14-263-2658

5120-14-557-7219
Socket Wrench Socket Set

145577219
MOD.HLA: RNCC: 3 | RNVC: 2
0731372: RNCC: 5 | RNVC: 2
3148517313729: RNCC: 5 | RNVC: 2

7 Jul 2008

5120-14-428-5345
Support Plaque

144285345
MKG3262101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-491-0149
Cle

144910149
4602 007 200 082: RNCC: 3 | RNVC: 2
F300 0T 001 0935: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-514-1191
Open End Wrench

145141191
ENFD29451-8X9: RNCC: 3 | RNVC: 2

27 Apr 1999

5120-14-503-8524
Socket Wrench Socket

145038524
K.32LA-ISOLEE RILSAN: RNCC: 3 | RNVC: 2
K.32LA-ISOLEE RILSAN: RNCC: 5 | RNVC: 2

2 Feb 1998

5120-14-576-6327
Mechanical Puller S

145766327
8813685002: RNCC: 3 | RNVC: 2

2 Jul 2013

5120-14-284-9923
Mechanical Finger

142849923
826.2: RNCC: 3 | RNVC: 2
826-2: RNCC: 5 | RNVC: 2
3148512061700: RNCC: 5 | RNVC: 2
0206170: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-360-0556
Teton Cle Initiateu

143600556
053W41-542454E: RNCC: 3 | RNVC: 2
0542454E00: RNCC: 5 | RNVC: 2

31 Oct 1979

5120-14-334-2300
Cle Bouchon Crepine

143342300
6280: RNCC: 3 | RNVC: 2
1037A4-6280: RNCC: 5 | RNVC: 2

23 Apr 1976

5120-14-568-1784
Combination Box And Open End Wrench

145681784
440.23: RNCC: 3 | RNVC: 2
3148517681088: RNCC: 5 | RNVC: 2
768108: RNCC: 5 | RNVC: 2

12 May 2011

5120-14-319-5812
Garnitur Extracteur

143195812
0UT72007: RNCC: 3 | RNVC: 2
E17453: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-490-8721
Broche

144908721
4065 020 000 589: RNCC: 3 | RNVC: 2
F300 0T 000 4961: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-274-0518

5120-14-214-8317

5120-14-388-1184
Outil Sertissage

143881184
AEET4M9704-1000: RNCC: 3 | RNVC: 2
85-800-9516: RNCC: 6 | RNVC: 9

12 Oct 1983

5120-14-220-5150
Tas Dextraction

142205150
3160S95-33-006: RNCC: 3 | RNVC: 2
3160-95-33-006: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-213-4031
Cle De Serrage Spec

142134031
3882-025: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-429-4897
Spanner Wrench

144294897
Y075-064-000A: RNCC: 3 | RNVC: 2
85-694-1451: RNCC: 6 | RNVC: 9

25 Jan 1989

5120-14-477-7276
Spanner Wrench

144777276
3246-890-000: RNCC: 3 | RNVC: 2
1112322F00: RNCC: 5 | RNVC: 2
3246-890-000: RNCC: 5 | RNVC: 9

20 Sep 1995

5120-14-423-6703
Open End Wrench

144236703
7498-0063: RNCC: 3 | RNVC: 2
91618375: RNCC: 5 | RNVC: 2
SAF7498-0063: RNCC: 5 | RNVC: 9

26 Apr 1988

5120-14-441-3270
Face Spanner Wrench Socket

144413270
MHJ376-24: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-281-7486
Te De Levage

142817486
HE60X1: RNCC: 3 | RNVC: 2
531463: RNCC: 5 | RNVC: 2
HE60X1: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-436-0198
Outil Reglage Cale

144360198
RT30967: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-284-1930

5120-14-443-5887
Obus

144435887
330A93-2029-21: RNCC: 3 | RNVC: 2

28 Nov 1990

5120-14-239-6909
Torque Wrench Adapter

142396909
DC-2-3/4: RNCC: 3 | RNVC: 2
DC2 3-4: RNCC: 3 | RNVC: 2
V2-95-018-03: RNCC: 5 | RNVC: 2
V2-95-019-04: RNCC: 5 | RNVC: 2
3272670220560: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-234-4283

5120-14-534-0797
Flat Tip Screwdriver Set

145340797
AEF.J6: RNCC: 3 | RNVC: 2
3148515003509: RNCC: 5 | RNVC: 2

12 Mar 2003

5120-14-444-3180
Combination Box And Open End Wrench

144443180
GS130-16: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-513-9798
Open End Wrench

145139798
ENFD29159-6X8: RNCC: 3 | RNVC: 2

21 Apr 1999

5120-14-237-4766
Detent Handling Tool

142374766
3160-95-12-480: RNCC: 3 | RNVC: 2
3160S95-12-480: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-442-5375
Spanner Wrench

144425375
D1557-60020: RNCC: 3 | RNVC: 2
D1557-60020: RNCC: 5 | RNVC: 9

17 Oct 1990

5120-14-264-7867
Blacksmith's Bottom Swage

142647867
649-10: RNCC: 3 | RNVC: 2
M0B19-10: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-352-0848
Bearing Staking Installation Tool

143520848
341A93-3136-20: RNCC: 3 | RNVC: 2

21 Feb 1996

5120-14-392-0536
Torque Wrench Adapter

143920536
MHL372-21: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-513-4111
Socket Head Screw Key

145134111
NO PRIMARY REF14-513-4111: RNCC: 3 | RNVC: 2
NNP 5120860464850: RNCC: 5 | RNVC: 9

17 Mar 1999

5120-14-406-5603
Transport Chariot

144065603
853-200-607-0: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-521-6337
Socket Wrench Socket

145216337
NO PRIMARY REF14-521-6337: RNCC: 3 | RNVC: 2
JB.18: RNCC: 5 | RNVC: 2
0029132: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-518-0264
Six Point Tip Screwdriver

145180264
ENFD6576-6X60-6PANS: RNCC: 3 | RNVC: 2

21 Jan 2000

5120-14-343-7489
Spanner Wrench

143437489
Y075-011-000A: RNCC: 3 | RNVC: 2
Y075-011A: RNCC: 5 | RNVC: 2

13 Jul 1977

5120-14-043-1042
Spanner Wrench

140431042
0762018E00: RNCC: 3 | RNVC: 2
069U20-762018E: RNCC: 5 | RNVC: 2

10 Apr 1984

5120-14-343-8351

5120-14-360-0798
Outil Refection Val

143600798
16178: RNCC: 3 | RNVC: 2
16178: RNCC: 5 | RNVC: 9

31 Oct 1979

5120-14-239-5215

5120-14-249-8209
Sheet Metalworking Dolly Block

142498209
M0B320: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-546-4090
Lifting Pneumatic Bag

145464090
Z1926: RNCC: 3 | RNVC: 2
SYQ5885: RNCC: 5 | RNVC: 2

1 Jul 2005

5120-14-355-3775
Wrench Kit

143553775
525291: RNCC: 3 | RNVC: 2

19 Mar 1979

5120-14-436-0261
Preformed Packing Inserter

144360261
RT30087: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-251-0839

Load More Results