What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 69 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 69 of 110

5120-14-409-3599
Extracteur Corps

144093599
529975: RNCC: 3 | RNVC: 2

28 May 1986

5120-14-203-1373

5120-14-266-7017

5120-14-316-1335
Regleur Doculaire

143161335
3511-961-26421: RNCC: 3 | RNVC: 2
MQ12642: RNCC: 5 | RNVC: 2
3511 961 26421: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-247-4769
Appareil De Demonta

142474769
912092: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-556-1568
Socket Wrench Adapter

145561568
MT23241313: RNCC: 3 | RNVC: 2

6 Feb 2008

5120-14-428-5342
Appui Plaque

144285342
MKA4502102: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-421-8230
Socket Wrench Socket

144218230
3215533: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-503-0837
Socket Wrench Handle Bar

145030837
876040: RNCC: 3 | RNVC: 2

7 Jan 1998

5120-14-424-2460
Hand Blind Riveter

144242460
ZH510: RNCC: 3 | RNVC: 2
91619302: RNCC: 5 | RNVC: 2

19 May 1988

5120-14-548-4098
Cross Tip Screwdriver

145484098
ACZDH.2X100: RNCC: 3 | RNVC: 2

13 Jan 2006

5120-14-426-8414
Cel Reglage Centrag

144268414
0419-40003: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-233-4395

5120-14-503-8407

5120-14-345-0185
Montage Grue Outil

143450185
3901505: RNCC: 3 | RNVC: 2

5 Oct 1977

5120-14-368-0382
Impact Type Bit Set And Handle Screwdriver

143680382
NS.260A: RNCC: 3 | RNVC: 2
NS260A: RNCC: 5 | RNVC: 2
0184470Y00: RNCC: 5 | RNVC: 2
3148510436005: RNCC: 5 | RNVC: 2
91628342: RNCC: 5 | RNVC: 2
NS260: RNCC: 5 | RNVC: 9
0043600: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-332-6201
Screw Thread Insert Inserter

143326201
01500414060: RNCC: 3 | RNVC: 2
32241450: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-264-9591
Spanner Wrench

142649591
0321-78: RNCC: 3 | RNVC: 2
0321-78: RNCC: 3 | RNVC: 2
RA321: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-246-0570
Open End Wrench

142460570
81081BA: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-425-1148
Hand Terminal Crimping Tool

144251148
R282.223.000: RNCC: 3 | RNVC: 2
R282223: RNCC: 5 | RNVC: 9

21 Jun 1988

5120-14-433-6097
Torque Wrench Adapter

144336097
RGM: RNCC: 3 | RNVC: 2
91622088: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-313-7208
Faux Mors

143137208
C46030: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-273-6010
Spanner Wrench

142736010
50047: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-375-1765
Open End Wrench

143751765
16380160: RNCC: 3 | RNVC: 2
16380160: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-433-6702
Socket Head Screw Key

144336702
MDO905031: RNCC: 3 | RNVC: 2
MOO905031: RNCC: 5 | RNVC: 1
M00905031: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-426-8276
Socket Head Screw Key

144268276
0419-40027: RNCC: 3 | RNVC: 2

23 Sep 1988

5120-14-517-6078
Retaining Ring Installation Tool

145176078
899755: RNCC: 3 | RNVC: 2

5 Jan 2000

5120-14-415-4422
Socket Wrench Socket

144154422
M4Z6021910424: RNCC: 3 | RNVC: 2

18 May 1987

5120-14-350-6854

5120-14-253-6241
Spanner Wrench

142536241
0229-78: RNCC: 3 | RNVC: 2
RA229: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-517-0542
Cross Tip Screwdriver Set

145170542
AZP.JS5: RNCC: 3 | RNVC: 2

28 Oct 1999

5120-14-287-1644
Flat Tip Screwdriver

142871644
ENFD5234E12X250: RNCC: 3 | RNVC: 2
2110: RNCC: 5 | RNVC: 2
C0P41S1385: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-539-2585
Mechanical Puller Body

145392585
T623G3005121: RNCC: 3 | RNVC: 2

17 Dec 2003

5120-14-457-9774
Brad Awl

144579774
529980: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-338-6316

5120-14-283-6117
Craftsman's Tweezers

142836117
103N0GENT: RNCC: 3 | RNVC: 2
103-1760: RNCC: 5 | RNVC: 2
7162: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-439-7790
Bearing And Bushing Inserter

144397790
6801G39-0008-00: RNCC: 3 | RNVC: 2

23 May 1990

5120-14-329-3594
Cle Speciale

143293594
NO PRIMARY REF14-329-3594: RNCC: 3 | RNVC: 2
984-78: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-329-1316
Rodoir Ventouse

143291316
U.54AV3: RNCC: 3 | RNVC: 2
3148510704081: RNCC: 5 | RNVC: 2
0070408: RNCC: 5 | RNVC: 9
U54V3: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-338-1610
Etau A Chanfrein

143381610
39: RNCC: 3 | RNVC: 2
DOL39: RNCC: 5 | RNVC: 9

6 Nov 1976

5120-14-521-8897
Hand Terminal Crimping Tool

145218897
C234040A0000: RNCC: 3 | RNVC: 2
C234040A: RNCC: 5 | RNVC: 2
C234040A: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-14-228-7202

5120-14-219-1030
Garde Dhelice Fauss

142191030
NO PRIMARY REF14-219-1030: RNCC: 3 | RNVC: 2
773-022-158: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-261-4509
Chasse A Parer Plat

142614509
NO PRIMARY REF14-261-4509: RNCC: 3 | RNVC: 2
74791-60: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-490-8904
Lame

144908904
4067 200 000 488: RNCC: 3 | RNVC: 2
F300 0T 000 5178: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-308-8218

5120-14-439-9042
Retaining Ring Pliers

144399042
8-0310H: RNCC: 3 | RNVC: 2

5 Jun 1990

5120-14-572-1171
Mechanical Puller

145721171
DCR.SRPB: RNCC: 3 | RNVC: 2
3148518369596: RNCC: 5 | RNVC: 2
836959: RNCC: 5 | RNVC: 2
DCR.SR: RNCC: 5 | RNVC: 9

8 Jun 2012

5120-14-321-5673
Coin De Demontage

143215673
065-30-9005REP8: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-376-2267
Positionneur Segmen

143762267
NO PRIMARY REF14-376-2267: RNCC: 3 | RNVC: 2
0U129484: RNCC: 5 | RNVC: 9
OU129484: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-543-5430
Socket Wrench Spanner Attachment

145435430
0M4116: RNCC: 3 | RNVC: 2

19 Nov 2004

5120-14-508-1781
Socket Wrench Socket

145081781
968720: RNCC: 3 | RNVC: 2

26 Aug 1998

5120-14-551-0182
Spanner Wrench

145510182
F46825: RNCC: 3 | RNVC: 2

21 Aug 2006

5120-14-537-2412
Electrical Connector Inserter

145372412
399A346: RNCC: 3 | RNVC: 2
3990000346: RNCC: 3 | RNVC: 9
AA004306: RNCC: 6 | RNVC: 9

15 Oct 2003

5120-14-283-1518
Rodoir Du Siege

142831518
403037T: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-311-4676

5120-14-446-3623
Tournevis Potentio

144463623
8T000: RNCC: 3 | RNVC: 9

18 Mar 1991

5120-14-573-3874
Open End Wrench

145733874
18.13: RNCC: 3 | RNVC: 2

10 Oct 2012

5120-14-506-2374
Cle

145062374
OM93337: RNCC: 3 | RNVC: 2

15 Apr 1998

5120-14-260-8787

5120-14-281-1862

5120-14-416-8104
De Serrage Montage

144168104
MH0682100: RNCC: 3 | RNVC: 2
MH068-21-00: RNCC: 5 | RNVC: 2
MH0682100: RNCC: 5 | RNVC: 2

25 Jun 1987

5120-14-210-5461
Offset Screwdriver

142105461
APZ.B: RNCC: 3 | RNVC: 2
APZB: RNCC: 5 | RNVC: 2
3148510096209: RNCC: 5 | RNVC: 2
91498756: RNCC: 5 | RNVC: 2
16400824-0: RNCC: 5 | RNVC: 2
FACOM APZ-B: RNCC: 5 | RNVC: 2
0009620: RNCC: 5 | RNVC: 9
958 244 002 001: RNCC: 6 | RNVC: 9

1 Jan 1964

5120-14-511-3870
Flat Tip Screwdriver

145113870
AZFH.5,5X125: RNCC: 3 | RNVC: 2
0613 232 55: RNCC: 5 | RNVC: 2
3148510134369: RNCC: 5 | RNVC: 2
AZFH.5,5X125: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-398-1466
A Bille Embout

143981466
F47588: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-490-8758
Cle

144908758
4065 030 001 328: RNCC: 3 | RNVC: 2
F300 0T 000 5016: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-355-4496

5120-14-565-5040

5120-14-538-8816
Spanner Wrench

145388816
NGM0022030200461: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-463-3296
Open End Wrench

144633296
0000090901: RNCC: 3 | RNVC: 2

9 Jun 1993

5120-14-229-1864

5120-14-395-4099
Cle

143954099
4-14728: RNCC: 3 | RNVC: 2

11 Oct 1984

5120-14-402-3307
Out Contro Vrillage

144023307
365A94-3455-00: RNCC: 3 | RNVC: 2

3 Jul 1985

5120-14-506-7636
De Montage Outil

145067636
M11920: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-362-7523
Outil Dispositif Ra

143627523
PR46748: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-483-0974
Fourche Cle Embout

144830974
0U144165: RNCC: 3 | RNVC: 2
0U144165: RNCC: 5 | RNVC: 2
0U144165: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-390-4850
Arrache Bague

143904850
DLP751750: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-214-4142

5120-14-459-6465
Cle Speciale

144596465
312-01643-001-W26H2: RNCC: 3 | RNVC: 2

10 Dec 1992

5120-14-370-8137
Spanner Wrench

143708137
6254-57026: RNCC: 3 | RNVC: 2

5 Jun 1981

5120-14-409-3060
Appareila Deglasser

144093060
DLT587516: RNCC: 3 | RNVC: 2

27 May 1986

5120-14-424-0657
Socket Wrench Socket

144240657
75145012700: RNCC: 3 | RNVC: 2
360537: RNCC: 5 | RNVC: 9
751450127: RNCC: 5 | RNVC: 9

11 May 1988

5120-14-449-8532
Hand Terminal Crimping Tool

144498532
389516M: RNCC: 3 | RNVC: 2

11 Sep 1991

5120-14-457-4389
Face Spanner Wrench Socket

144574389
45057850: RNCC: 3 | RNVC: 2
45057850: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-431-2734
Pince Depose Bague

144312734
M12630: RNCC: 3 | RNVC: 2

12 Apr 1989

5120-14-358-6829
Spanner Wrench

143586829
702101-00: RNCC: 3 | RNVC: 2

7 Sep 1979

5120-14-279-0611
Fixed Open End Wrench Set

142790611
0529212: RNCC: 3 | RNVC: 2
44JE15: RNCC: 5 | RNVC: 2
44.JE15: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-382-7626
Electrical Contact Remover

143827626
809816: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-210-9814
Flat Tip Screwdriver

142109814
A291S4X50: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-296-2546
Spanner Wrench

142962546
0UT55: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-261-0372
Spanner Wrench

142610372
0361-78: RNCC: 3 | RNVC: 2
RA361: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-429-7117
Detent Handling Tool

144297117
16994287: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-14-395-7369
Spanner Wrench

143957369
600403615: RNCC: 3 | RNVC: 2
600403615: RNCC: 5 | RNVC: 9

30 Oct 1984

5120-14-394-9211
Socket Head Screw Key

143949211
20733302: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-292-0794
Appareil Subito Bie

142920794
NO PRIMARY REF14-292-0794: RNCC: 3 | RNVC: 2
NIL: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-561-9294
Hand Scissors Jack

145619294
6725 78: RNCC: 3 | RNVC: 2

17 Sep 2009

5120-14-553-2552
Spanner Wrench

145532552
DIN1810B: RNCC: 3 | RNVC: 2

19 Mar 2007

5120-14-283-1304
Spanner Wrench

142831304
T0120BBF5APL2: RNCC: 3 | RNVC: 2
403659T: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-463-7691
Spanner Wrench

144637691
7M518: RNCC: 3 | RNVC: 2

29 Jun 1993

5120-14-416-7529
Plaque D'appui

144167529
537346: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-347-9498
Socket Head Screw Key

143479498
MAS4716: RNCC: 3 | RNVC: 2

29 Mar 1978

5120-14-523-5455
Hydraulic Fitting Crimping Tool Head

145235455
DLT20PSHAS015: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-283-9578
Face Spanner Wrench Socket

142839578
9970-115-325: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-311-4508
Bearing And Bushing Inserter And Remover

143114508
3130S95-47-004: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-229-2679
Outil Elargeur Pour

142292679
VTR250-1097: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-563-1782
Adjustable Wrench

145631782
113A.4T: RNCC: 3 | RNVC: 2

12 Jan 2010

5120-14-563-8301
Mechanical Puller Gear Adapter

145638301
09214-76011: RNCC: 3 | RNVC: 2

19 Mar 2010

5120-14-562-2177
Spanner Wrench

145622177
L65723435A: RNCC: 3 | RNVC: 2

7 Oct 2009

5120-14-562-2497
Hand Screw Jack

145622497
725658: RNCC: 3 | RNVC: 2

9 Oct 2009

5120-14-416-8992
Controle Outillage

144168992
46AM101: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-344-0049

5120-14-285-5949

5120-14-328-9803
Spanner Wrench

143289803
DNAR508REPB80: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-514-9263
Socket Wrench Handle

145149263
9501VMO: RNCC: 3 | RNVC: 2

23 Jun 1999

5120-14-395-4517
Socket Head Screw Key

143954517
14000194: RNCC: 3 | RNVC: 2

27 Oct 1984

5120-14-513-0863
Final Drive Assembly Alignment Pin

145130863
800815173: RNCC: 3 | RNVC: 2

3 Mar 1999

5120-14-523-5438
Hand Hose Fitting Swaging Tool Kit

145235438
DLTFRPSKTM085: RNCC: 3 | RNVC: 2

24 Jan 2001

5120-14-289-8453
Hand Terminal Crimping Tool

142898453
46470: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-461-7091
Hand Tube Bender Set

144617091
2502-614: RNCC: 3 | RNVC: 2

24 Mar 1993

5120-14-268-0066
Spanner Wrench

142680066
DE48F3: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-523-0792
Communications Equipment Spring Adjuster

145230792
8018819C00: RNCC: 3 | RNVC: 2

20 Dec 2000

5120-14-505-1902
Socket Wrench Screwdriver Attachment

145051902
SV.8L: RNCC: 3 | RNVC: 2
0715 138 08: RNCC: 5 | RNVC: 2
3148510592206: RNCC: 5 | RNVC: 2
SV8L: RNCC: 5 | RNVC: 2

11 Mar 1998

5120-14-531-6735
Adjustable Wrench

145316735
113.4CG: RNCC: 3 | RNVC: 2
113,4CG: RNCC: 5 | RNVC: 2

11 Sep 2002

5120-14-518-0866
Face Spanner Wrench Socket

145180866
8018741A00: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-14-371-8953

5120-14-376-0511
Extraction Pince

143760511
TMY20-57-302: RNCC: 3 | RNVC: 2

30 Mar 1982

5120-14-397-4839
Screwdriver Bit

143974839
NO PRIMARY REF14-397-4839: RNCC: 3 | RNVC: 2
0024053: RNCC: 5 | RNVC: 2
EP.103: RNCC: 5 | RNVC: 2
EP103: RNCC: 5 | RNVC: 2
EPS3: RNCC: 5 | RNVC: 2

14 Dec 1984

5120-14-374-0887
Etau Cle

143740887
UHC303-41: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-289-7376

5120-14-567-0003
Open End Wrench

145670003
R52484: RNCC: 3 | RNVC: 2

26 Jan 2011

5120-14-299-6417
Douille Sertissage

142996417
FF10X1A: RNCC: 3 | RNVC: 2
0T1623: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-436-0206
Support Ensemble

144360206
806084: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-225-8926

5120-14-556-9764
Woven Cable Grip

145569764
78000220: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-282-9212
Screwdriver Bit

142829212
SS10: RNCC: 3 | RNVC: 2
130349: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-459-3267
Socket Head Screw Key

144593267
OS22696: RNCC: 3 | RNVC: 2
0S22696: RNCC: 5 | RNVC: 9

25 Nov 1992

5120-14-454-7807
Spanner Wrench

144547807
0F657: RNCC: 3 | RNVC: 2

15 Apr 1992

5120-14-504-0796
Combination Lock Reset Key

145040796
DHV19008: RNCC: 3 | RNVC: 2

5 Feb 1998

5120-14-458-3083
Socket Wrench Extension

144583083
45056042: RNCC: 3 | RNVC: 2
45056042: RNCC: 5 | RNVC: 9

15 Oct 1992

5120-14-458-6303
Combination Open End And Spanner Wrench

144586303
M4HZ7101959820: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-357-4333
Ring Retaining Pliers Tip Set

143574333
470.E2: RNCC: 3 | RNVC: 2
3148511778203: RNCC: 5 | RNVC: 2
470E2: RNCC: 5 | RNVC: 2
91374044: RNCC: 5 | RNVC: 2
0177820: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-262-5116

5120-14-449-1828
Screwdriver Bit

144491828
ENX.245: RNCC: 3 | RNVC: 2
ENX245: RNCC: 5 | RNVC: 2
3148510239989: RNCC: 5 | RNVC: 2
0023998: RNCC: 5 | RNVC: 9
023998: RNCC: 5 | RNVC: 9

2 Aug 1991

5120-14-299-8157
Socket Wrench Handle Bar

142998157
000MA0595: RNCC: 3 | RNVC: 2
701MA010REP5: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-478-3313
Screwdriver Bit

144783313
EH.107: RNCC: 3 | RNVC: 2
3148510233772: RNCC: 5 | RNVC: 2
0183076P00: RNCC: 5 | RNVC: 2
0023377: RNCC: 5 | RNVC: 9

25 Oct 1995

5120-14-445-5629
Bearing And Bushing Remover

144455629
516301-02: RNCC: 3 | RNVC: 9

18 Feb 1991

5120-14-296-0180
Sheet Metalworking Dolly Block

142960180
871-60: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-550-6839
Socket Wrench Socket

145506839
730010S161-00A: RNCC: 3 | RNVC: 2

6 Jul 2006

5120-14-539-8124
Flat Tip Screwdriver

145398124
974-146046-90: RNCC: 3 | RNVC: 2

11 Feb 2004

5120-14-272-3663
Open End Wrench

142723663
E74302C32-33WWW: RNCC: 2 | RNVC: 1

1 Jan 1971

5120-14-555-9767
Flat Tip Screwdriver

145559767
TB-65E150: RNCC: 3 | RNVC: 2

16 Jan 2008

5120-14-232-4944
Open End Wrench

142324944
44-15X17CP: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-428-8549
Spanner Wrench

144288549
AMX10-193-353-3A2: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-437-3564
Spanner Wrench

144373564
J00650-01S140P007: RNCC: 3 | RNVC: 2

30 Jan 1990

5120-14-246-7009
Open End Wrench

142467009
NO PRIMARY REF14-246-7009: RNCC: 3 | RNVC: 2
E74301C63WWF: RNCC: 5 | RNVC: 1
3272670236448: RNCC: 5 | RNVC: 2
69-63: RNCC: 5 | RNVC: 2
27828: RNCC: 5 | RNVC: 2
CNM69-63: RNCC: 5 | RNVC: 9
4062-63: RNCC: 5 | RNVC: 9
3345-63: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-224-7868
Electrical Contact Remover

142247868
8400-448: RNCC: 3 | RNVC: 2
DRK218: RNCC: 5 | RNVC: 2
5M.8938.220.40: RNCC: 5 | RNVC: 2
5M8938-220-40: RNCC: 5 | RNVC: 2
603-017: RNCC: 5 | RNVC: 2
8400-448: RNCC: 5 | RNVC: 2
8400-448: RNCC: 5 | RNVC: 2
91357209: RNCC: 5 | RNVC: 2
8400-448: RNCC: 5 | RNVC: 2
8400-448: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-229-5468
Doigt En Bronze Dal

142295468
4318765: RNCC: 3 | RNVC: 2
4318765: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-528-2388
Rallonge Demontage

145282388
26145804643: RNCC: 3 | RNVC: 2

15 Jan 2002

5120-14-392-5237
Positionneme Broche

143925237
30AM021: RNCC: 3 | RNVC: 2

21 Mar 1984

5120-14-392-2365

5120-14-506-7220
Handling Tool Arm

145067220
J05190-02-0320: RNCC: 3 | RNVC: 2

13 May 1998

5120-14-225-3978
Adaptateur Cle Dyna

142253978
M155A: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-276-7020
Compresseur Ressort

142767020
0845-78: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-344-3394
Fond Distri Extract

143443394
PR47609: RNCC: 3 | RNVC: 2

10 Aug 1977

5120-14-307-6468
Cone Femelle Etage4

143076468
33344AREP2: RNCC: 3 | RNVC: 2
33344REP2: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-557-2573
Face Spanner Wrench Socket

145572573
06C366: RNCC: 3 | RNVC: 2

28 May 2008

5120-14-352-7990
Cambreur De Ressort

143527990
912091: RNCC: 3 | RNVC: 2

14 Nov 1978

5120-14-298-9271

5120-14-294-6162

5120-14-283-4309

5120-14-490-9488
Tuyau

144909488
4280 284 000 024: RNCC: 3 | RNVC: 2
F300 0T 000 7232: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-242-9341
Craftsman's Tweezers

142429341
14-242-9341: RNCC: 3 | RNVC: 2
707A14: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-205-8244
Fourche Pour Poteau

142058244
NO PRIMARY REF14-205-8244: RNCC: 3 | RNVC: 2
5823: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-321-9614
Pince Souder Plasti

143219614
P20: RNCC: 3 | RNVC: 2
P520A000001N: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-229-1756
Outil Dalignement

142291756
12502194: RNCC: 3 | RNVC: 2
12502194: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-263-2653

5120-14-455-0035
Socket Wrench Adapter-Extension

144550035
851-190-024-0: RNCC: 3 | RNVC: 2

1 May 1992

5120-14-040-2971
Tige Dextraction

140402971
NO PRIMARY REF14-040-2971: RNCC: 3 | RNVC: 2
RT7648-4: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-437-9391
Torque Wrench Adapter

144379391
100916: RNCC: 3 | RNVC: 2
C58919: RNCC: 5 | RNVC: 2

28 Feb 1990

5120-14-552-4405
Open End Wrench

145524405
S642V4001801: RNCC: 3 | RNVC: 2

3 Jan 2007

5120-14-274-8322
Blacksmith's Anvil

142748322
13-27-45KG: RNCC: 2 | RNVC: 2

1 Jan 1971

5120-14-375-8003
Open End Wrench

143758003
16776569: RNCC: 3 | RNVC: 2
16776569: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-485-8732
Screwdriver Bit

144858732
ES.638: RNCC: 3 | RNVC: 2
ES638: RNCC: 5 | RNVC: 2
3148510248240: RNCC: 5 | RNVC: 2
0024824: RNCC: 5 | RNVC: 9

19 Feb 1997

5120-14-329-5953
Face Spanner Wrench Socket

143295953
C47654: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-523-8261
Mattock-Pick Handle

145238261
233072: RNCC: 3 | RNVC: 2

5 Feb 2001

5120-14-323-9250
Socket Head Screw Key Set

143239250
80.JL7: RNCC: 3 | RNVC: 2
80JL7: RNCC: 5 | RNVC: 2
3148515326004: RNCC: 5 | RNVC: 2
0532600: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-364-7973
Spanner Wrench

143647973
210012: RNCC: 3 | RNVC: 2

2 Sep 1980

5120-14-428-5327
Graissage Montage

144285327
MMG060-08: RNCC: 3 | RNVC: 2
MMG060-08: RNCC: 5 | RNVC: 2

8 Dec 1988

5120-14-512-0334
Bearing And Bushing Remover

145120334
NO PRIMARY REF14-512-0334: RNCC: 3 | RNVC: 2
3272670327207: RNCC: 5 | RNVC: 2
EX135: RNCC: 5 | RNVC: 9

3 Feb 1999

5120-14-204-3023
Adaptateur Special

142043023
M3-049: RNCC: 3 | RNVC: 2
M3-049: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-297-7693
Spanner Wrench

142977693
6800-2216: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-208-7291

5120-14-395-0750
De Retreint Bague

143950750
H46667: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-575-6842
Pole Extension

145756842
S621V1010128: RNCC: 3 | RNVC: 2

23 Apr 2013

5120-14-333-3872

5120-14-040-7341
Demonte Cercle Jant

140407341
000116005P: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-562-2741
Putty Knife

145622741
545-16: RNCC: 3 | RNVC: 2
438591: RNCC: 5 | RNVC: 2
545-16: RNCC: 5 | RNVC: 2

12 Oct 2009

5120-14-200-9455
Open End Wrench

142009455
44.11/32X13/32: RNCC: 3 | RNVC: 2
0104370: RNCC: 5 | RNVC: 2
3148511043714: RNCC: 5 | RNVC: 2
33-11-32-13-32: RNCC: 5 | RNVC: 2
44 11-32X13-32: RNCC: 5 | RNVC: 2
44 11-32X13-32CP: RNCC: 5 | RNVC: 2
44-11-32X13-32: RNCC: 5 | RNVC: 2
44-11-32X13-32CP: RNCC: 5 | RNVC: 2
44S11-32X13-32: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-219-3658

5120-14-388-9253
Tube Packing Ring Installing Tool

143889253
8814359000: RNCC: 3 | RNVC: 2

29 Nov 1983

5120-14-515-5337
Final Drive Assembly Alignment Pin

145155337
150G4358: RNCC: 3 | RNVC: 2

21 Jul 1999

5120-14-317-0488
Spanner Wrench

143170488
RT6051: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-543-3042
Spanner Wrench

145433042
7M872: RNCC: 3 | RNVC: 2

19 Oct 2004

5120-14-284-9909
Socket Wrench Extension

142849909
NG.210: RNCC: 3 | RNVC: 2
NG210: RNCC: 5 | RNVC: 2
3148510352008: RNCC: 5 | RNVC: 2
0035200: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-295-0090
Screwdriver Bit Set And Handle

142950090
0221000061: RNCC: 3 | RNVC: 2
2210: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-456-8472
Spanner Wrench

144568472
NO PRIMARY REF14-456-8472: RNCC: 3 | RNVC: 2
BLB88: RNCC: 5 | RNVC: 9
85-694-5938: RNCC: 6 | RNVC: 9

24 Jul 1992

5120-14-492-0480
Outil

144920480
NO PRIMARY REF14-492-0480: RNCC: 3 | RNVC: 2
407R: RNCC: 5 | RNVC: 9
F300 0T 006 7601: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-484-8738
Six Pans Manoeuvre

144848738
4448-1024: RNCC: 3 | RNVC: 2

12 Dec 1996

5120-14-400-2697
Pliers

144002697
424-65087-000: RNCC: 3 | RNVC: 2
04-424-09465-000: RNCC: 5 | RNVC: 2

24 Apr 1985

5120-14-239-9612
Spanner Wrench

142399612
552-405MA083DET3: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-249-6761
Extracteur Special

142496761
2-02526: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-430-1011
Cloche Pince

144301011
6814-58537: RNCC: 3 | RNVC: 2

1 Mar 1989

5120-14-306-3435
Crochet Pour Sandow

143063435
330A93-0010-00: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-375-7056
Tape De Pont Cle

143757056
GSM482-007F10: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-295-6853

5120-14-374-6779

5120-14-279-8329
Bague De Controle

142798329
002-01-22-030C1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-309-7466
Extracteur Element

143097466
341A98-2036-23: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-414-2967
Spanner Wrench

144142967
110-420-03W26H: RNCC: 3 | RNVC: 2
110-420-03-W26H: RNCC: 5 | RNVC: 2
85-692-5692: RNCC: 6 | RNVC: 9

28 Jan 1987

5120-14-357-3242

5120-14-226-0009

5120-14-434-1203
Mechanical Puller Attachment

144341203
MNOC2400004: RNCC: 3 | RNVC: 2
M0FC400004: RNCC: 5 | RNVC: 1

6 Sep 1989

5120-14-264-9579
Spanner Wrench

142649579
0291-78: RNCC: 3 | RNVC: 2
RA291: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-287-6934
Electrical Contact Remover

142876934
672: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-437-4355
Tube Packing Ring Installing Tool

144374355
16380194: RNCC: 3 | RNVC: 2
16380194: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-288-8635
Extracteur

142888635
22046018: RNCC: 3 | RNVC: 2
22046018: RNCC: 3 | RNVC: 9

1 Jan 1972

5120-14-298-1427

5120-14-375-3103
Extracteur Dergot

143753103
A33135R: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-385-7537
Adaptateur Tensionn

143857537
338815: RNCC: 3 | RNVC: 2

26 Jul 1983

5120-14-212-9173

5120-14-310-7436

5120-14-237-5433

5120-14-570-5566
Socket Wrench Socket

145705566
A563715: RNCC: 3 | RNVC: 2
14100085958: RNCC: 5 | RNVC: 2

4 Jan 2012

5120-14-361-4354
Rode Siege Soupape

143614354
NO PRIMARY REF14-361-4354: RNCC: 3 | RNVC: 2
231460: RNCC: 5 | RNVC: 9

24 Jan 1980

5120-14-493-9746
Cle

144939746
8S8289: RNCC: 3 | RNVC: 2
F300 0T 014 8890: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-258-5046
Levier De Degagemen

142585046
42400: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-268-7026
Calibre De Controle

142687026
809721: RNCC: 3 | RNVC: 2
5210AA1011280: RNCC: 6 | RNVC: 9

1 Jan 1970

5120-14-231-7231
Extracteur Axe Supp

142317231
9970-111-099: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-365-1795
Open End Wrench

143651795
NO PRIMARY REF14-365-1795: RNCC: 3 | RNVC: 2
13CFS: RNCC: 5 | RNVC: 9

19 Sep 1980

5120-14-396-6100
Flat Tip Screwdriver

143966100
38BTV01-35-075: RNCC: 3 | RNVC: 9

27 Nov 1984

5120-14-428-8840
Bearing And Bushing Inserter

144288840
350A93-3410-00: RNCC: 3 | RNVC: 2

22 Dec 1988

5120-14-464-9154
Sheet Metalworking Stake

144649154
851-930-689-0: RNCC: 3 | RNVC: 2

8 Sep 1993

5120-14-241-1464
Cle A Ergots Specia

142411464
0645-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-501-5954
Systeme

145015954
F300 0T 024 2901: RNCC: 3 | RNVC: 2
46063498: RNCC: 5 | RNVC: 2

5 Nov 1997

5120-14-223-8181

5120-14-226-0007

5120-14-395-0768
Fusee Fausse

143950768
F46114: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-481-3146
Face Spanner Wrench Socket

144813146
10443604: RNCC: 3 | RNVC: 2

1 May 1996

5120-14-449-1525
Seal Inserter And Remover

144491525
45057769: RNCC: 3 | RNVC: 2
45057769: RNCC: 5 | RNVC: 9

31 Jul 1991

5120-14-432-3886
Flat Tip Screwdriver

144323886
548496: RNCC: 3 | RNVC: 2
00548496: RNCC: 5 | RNVC: 2

7 Jun 1989

5120-14-472-5073
Flat Tip Screwdriver

144725073
214883: RNCC: 3 | RNVC: 2
89301189: RNCC: 5 | RNVC: 2

26 Oct 1994

5120-14-310-4883

5120-14-388-2332
Socket Head Screw Key

143882332
VTR501-2-1147: RNCC: 3 | RNVC: 2

12 Oct 1983

5120-14-424-8843
Spanner Wrench

144248843
851-750-048-0: RNCC: 3 | RNVC: 2

9 Jun 1988

5120-14-457-9467
Open End Wrench

144579467
853-100-293-0: RNCC: 3 | RNVC: 2

2 Oct 1992

5120-14-370-4533

5120-14-465-4657
Bearing And Bushing Inserter And Remover

144654657
851-500-081-0: RNCC: 3 | RNVC: 2

30 Sep 1993

5120-14-404-1087
Open End Wrench

144041087
10-20X22-P: RNCC: 3 | RNVC: 2
10-20X22P: RNCC: 3 | RNVC: 2
3272670272200: RNCC: 5 | RNVC: 2
10-20X22CP: RNCC: 5 | RNVC: 9

11 Sep 1985

5120-14-395-1829

5120-14-431-7323
Glissiere Gravure

144317323
05026066: RNCC: 3 | RNVC: 2

9 May 1989

5120-14-321-5577

5120-14-229-5470
Doigt En Bronze Dal

142295470
4320223: RNCC: 3 | RNVC: 2
4320223: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-575-0694
Bearing And Bushing Remover

145750694
8813607000: RNCC: 3 | RNVC: 2

12 Mar 2013

5120-14-285-4542
Spanner Wrench

142854542
HE60X7: RNCC: 3 | RNVC: 2
HE60X7: RNCC: 5 | RNVC: 2
531454: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-505-3040
Bearing And Bushing Inserter And Remover

145053040
MMG070A01: RNCC: 3 | RNVC: 2

18 Mar 1998

5120-14-228-5756

5120-14-403-3940
Open End Wrench

144033940
X6681: RNCC: 3 | RNVC: 2
X6681K: RNCC: 5 | RNVC: 2

21 Aug 1985

5120-14-419-1425
Electrical Contact Inserter And Remover

144191425
70372040: RNCC: 3 | RNVC: 2
70372040: RNCC: 5 | RNVC: 9

7 Oct 1987

5120-14-522-3842
Bearing And Bushing Inserter

145223842
TC3145G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-572-7654
Ratchet Wrench

145727654
64.22X24: RNCC: 3 | RNVC: 2
3148517424692: RNCC: 5 | RNVC: 2
742469: RNCC: 5 | RNVC: 2

31 Jul 2012

5120-14-360-0551
Cle Allumeur

143600551
053W41-542451B: RNCC: 3 | RNVC: 2
AMG91060: RNCC: 5 | RNVC: 2
0542451B00: RNCC: 5 | RNVC: 2

31 Oct 1979

5120-14-309-7818
Outil Demont Pl Bor

143097818
M24-001: RNCC: 3 | RNVC: 2
M24-001: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-465-0944
Plug Electrical Connector Extractor

144650944
E3-07036-000: RNCC: 3 | RNVC: 2
89139715: RNCC: 5 | RNVC: 2
E3-07036-000: RNCC: 5 | RNVC: 9

13 Sep 1993

5120-14-280-9361
Dispositif Arrache

142809361
NO PRIMARY REF14-280-9361: RNCC: 3 | RNVC: 2
145J545: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-212-9135
Cle Speciale

142129135
9970-115-198: RNCC: 3 | RNVC: 2
9970-115-198-00: RNCC: 5 | RNVC: 2

1 Jan 1964

5120-14-223-4985

5120-14-374-6758

5120-14-571-1187
Socket Head Screw Key

145711187
A551509: RNCC: 3 | RNVC: 2

21 Feb 2012

5120-14-232-6136
Socket Wrench Socket

142326136
A10: RNCC: 3 | RNVC: 2
PR26600: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-523-4484
Open End Wrench

145234484
G10CLE001: RNCC: 3 | RNVC: 2

22 Jan 2001

5120-14-534-0866
Preformed Packing Inserter

145340866
713007: RNCC: 3 | RNVC: 2

12 Mar 2003

5120-14-203-0079

5120-14-304-3156
Cone De Montage

143043156
S16-0609-1651: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-259-2589
Dispositif Demontag

142592589
NO PRIMARY REF14-259-2589: RNCC: 3 | RNVC: 2
2844-59-40: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-241-6096
Mandrin De Preserti

142416096
FF25X1C: RNCC: 3 | RNVC: 2
FF23X25C: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-347-8661

5120-14-362-7691
Spanner Wrench

143627691
PR47328: RNCC: 3 | RNVC: 2
85-689-7949: RNCC: 6 | RNVC: 9

19 Mar 1980

5120-14-297-7692
Spanner Wrench

142977692
6800-2215: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-362-2132
De Centrage Obus

143622132
30MS017-0000002: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-281-2974
Faux Mors Jambe Ava

142812974
C46918: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-429-1534
De Dressage Tas

144291534
548974: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-495-2773
Cle Montage

144952773
257080570: RNCC: 3 | RNVC: 2
F300 0T 018 9333: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-241-6070
Mandrin De Preserti

142416070
FF8X10MA: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-325-0295
Robinets Tas

143250295
0S21639: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-306-3519

5120-14-375-3120

5120-14-485-5887
Cle De Blocage

144855887
PL1NA003AA012631: RNCC: 3 | RNVC: 2

30 Jan 1997

5120-14-395-7522
Voyant Extracteur

143957522
0UT86: RNCC: 3 | RNVC: 2

30 Oct 1984

5120-14-323-2138

5120-14-337-4024
Spanner Wrench

143374024
3511 101 22111: RNCC: 3 | RNVC: 2
3511-101-22111: RNCC: 5 | RNVC: 2

7 Oct 1976

5120-14-216-4173
Socket Wrench Crowfoot Attachment

142164173
300249: RNCC: 3 | RNVC: 2
108: RNCC: 5 | RNVC: 2
108A: RNCC: 5 | RNVC: 2
100-8A: RNCC: 5 | RNVC: 2
W0F108A: RNCC: 5 | RNVC: 2
881-00-030-56: RNCC: 5 | RNVC: 2
100-108A: RNCC: 5 | RNVC: 2
8810003056: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-329-3595
Cle Speciale

143293595
NO PRIMARY REF14-329-3595: RNCC: 3 | RNVC: 2
985-78: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-514-8387
Cross Tip Screwdriver

145148387
ENFD6568-0X300: RNCC: 3 | RNVC: 2

21 Jun 1999

5120-14-374-0864
Socket Wrench Crowfoot Attachment

143740864
MHB304-41: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-556-5035
Socket Wrench Socket

145565035
JTX.12: RNCC: 3 | RNVC: 2
438366: RNCC: 5 | RNVC: 2
3148510291789: RNCC: 5 | RNVC: 2

14 Mar 2008

5120-14-361-3184

5120-14-560-5997
Socket Wrench

145605997
94A.10: RNCC: 3 | RNVC: 2

4 May 2009

5120-14-360-2783
Socket Wrench Socket

143602783
8810153005: RNCC: 3 | RNVC: 2

23 Nov 1979

5120-14-248-3513

5120-14-560-9009
Socket Head Screw Key

145609009
M15089: RNCC: 3 | RNVC: 2

28 May 2009

5120-14-265-9582

5120-14-444-7610
Cle De Reglage

144447610
0478-200600: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-267-6352

5120-14-571-2228
Combination Box And Open End Wrench Set

145712228
440.P25M: RNCC: 3 | RNVC: 2
FACOM 440.P25M: RNCC: 5 | RNVC: 2

29 Feb 2012

5120-14-357-6843

5120-14-041-5119

5120-14-216-7876
Open End Wrench

142167876
33-19-32-25-32: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-304-3157
Cone De Montage

143043157
S16-0607-0842: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-389-8757
Bearing And Bushing Inserter And Remover

143898757
8810120068: RNCC: 3 | RNVC: 2

20 Dec 1983

5120-14-285-4610

5120-14-416-3204
Socket Head Screw Key

144163204
265-2-821: RNCC: 3 | RNVC: 2
265-2-821: RNCC: 5 | RNVC: 9

3 Jun 1987

5120-14-468-9823
Seal Inserter And Remover

144689823
40N108304-1: RNCC: 3 | RNVC: 2

30 Mar 1994

5120-14-548-5090
Socket Wrench Socket

145485090
K.44HB: RNCC: 3 | RNVC: 2
00.51.86.45: RNCC: 5 | RNVC: 2

24 Jan 2006

5120-14-315-1884
Mechanical Puller Attachment

143151884
0-79716-1: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-462-9115
Bearing And Bushing Inserter And Remover

144629115
45057911: RNCC: 3 | RNVC: 2
45057911: RNCC: 5 | RNVC: 9

5 May 1993

5120-14-460-7074
Bearing And Bushing Inserter And Remover

144607074
45215263: RNCC: 3 | RNVC: 2
45215263: RNCC: 5 | RNVC: 9

4 Feb 1993

5120-14-451-0879
Mechanical Puller Adapter

144510879
305480: RNCC: 3 | RNVC: 2

30 Oct 1991

5120-14-552-8428
Retaining Ring Pliers

145528428
179E.15: RNCC: 3 | RNVC: 2
179E.15: RNCC: 5 | RNVC: 2
3148511412923: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-551-7196
Spanner Wrench

145517196
E3-2-1: RNCC: 3 | RNVC: 2

18 Oct 2006

5120-14-329-9294
Socket Wrench Socket

143299294
J.22H: RNCC: 3 | RNVC: 2
3148510275406: RNCC: 5 | RNVC: 2
J22H: RNCC: 5 | RNVC: 2
0027540: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-262-5551
Guide Pour Montage

142625551
M0NT16898-1: RNCC: 3 | RNVC: 2
M0N16898-1: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-420-5836
Combination Box And Open End Wrench Set

144205836
40JU17: RNCC: 3 | RNVC: 2

15 Dec 1987

5120-14-210-6904
Retaining Ring Pliers

142106904
593DE: RNCC: 3 | RNVC: 2

1 Jan 1964

5120-14-493-0066
Lime

144930066
4067 210 000 105: RNCC: 3 | RNVC: 2
F300 0T 009 4431: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-5768
Ventouse

144915768
600C2: RNCC: 3 | RNVC: 9
MUL600C2: RNCC: 5 | RNVC: 9
F300 0T 003 4078: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-410-3838
Bague Outillage

144103838
15737-512: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-520-7063
Adaptateur

145207063
AT134GA: RNCC: 3 | RNVC: 2

5 Jun 2000

5120-14-291-8154
Socket Wrench Socket

142918154
NS.12: RNCC: 3 | RNVC: 2
NS12: RNCC: 5 | RNVC: 2
3148510420400: RNCC: 5 | RNVC: 2
0042040: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-434-0865
Spanner Wrench

144340865
0886691Y00: RNCC: 3 | RNVC: 2

5 Sep 1989

5120-14-414-7565
Socket Head Screw Key

144147565
3599199: RNCC: 3 | RNVC: 2
3599199: RNCC: 5 | RNVC: 2

3 Mar 1987

5120-14-294-4769
Electronic Equipment Tuning Wand

142944769
1066017: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-527-8639
Torque Wrench Adapter

145278639
E2C001230000109: RNCC: 3 | RNVC: 2

28 Nov 2001

5120-14-256-0117
Support Dextracteur

142560117
U30B: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-302-6705
Open End Wrench

143026705
RACC34: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-234-3666
Socket Wrench Screwdriver Attachment

142343666
JP3: RNCC: 3 | RNVC: 2
3148515058400: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-436-2572
Spanner Wrench

144362572
095509P: RNCC: 3 | RNVC: 2

12 Dec 1989

5120-14-285-4505
Open End Wrench

142854505
520057: RNCC: 3 | RNVC: 2
L2878: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-525-2449
Spanner Wrench

145252449
06940P030000: RNCC: 3 | RNVC: 2

23 May 2001

5120-14-378-6467
Open End Wrench

143786467
20190432: RNCC: 3 | RNVC: 2
20190432: RNCC: 5 | RNVC: 9

11 Aug 1982

5120-14-543-2525
Socket Head Screw Key Set

145432525
89TX.PB: RNCC: 3 | RNVC: 2

9 Oct 2004

5120-14-291-8020
Open End Wrench

142918020
02640047600: RNCC: 3 | RNVC: 2
026400476: RNCC: 5 | RNVC: 2
305205: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-550-6485
Pliers

145506485
193.16G: RNCC: 3 | RNVC: 2

5 Jul 2006

5120-14-283-6541

5120-14-252-4682
Hand Terminal Crimping Tool

142524682
SP332: RNCC: 3 | RNVC: 2
26206: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-537-4487
Socket Head Screw Key

145374487
82H.4H0P: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-204-3046

5120-14-241-6068
Mandrin De Preserti

142416068
FF6X8C: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-203-2937
Embout Montage Demo

142032937
1521-96-33: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-279-8331
Extracteur De Roue

142798331
60290-02-00-060M1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-377-5191
Spanner Wrench

143775191
M24-027: RNCC: 3 | RNVC: 2

17 May 1982

5120-14-261-0378
Spanner Wrench

142610378
0594-78: RNCC: 3 | RNVC: 2
RA594: RNCC: 5 | RNVC: 2
85-261-0378: RNCC: 6 | RNVC: 9

1 Jan 1970

5120-14-222-6158
Socket Wrench Socket

142226158
NO PRIMARY REF14-222-6158: RNCC: 3 | RNVC: 2
40L9: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-429-1535
De Dressage Tas

144291535
548975: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-262-8114

5120-14-263-2699

5120-14-281-2912

5120-14-576-2119
Socket Wrench

145762119
99C.15: RNCC: 3 | RNVC: 2
3148516922465: RNCC: 5 | RNVC: 2
692246: RNCC: 5 | RNVC: 2

6 Jun 2013

5120-14-246-2304

5120-14-489-0320
Combination Box And Open End Wrench

144890320
39.6: RNCC: 3 | RNVC: 2
39-6H: RNCC: 3 | RNVC: 9
3148510998701: RNCC: 5 | RNVC: 2
0099870: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-483-8695
Adjustable Wrench

144838695
0-702454: RNCC: 3 | RNVC: 2

5 Oct 1996

5120-14-234-4276

5120-14-490-8976
Chasse

144908976
4067 920 002 160: RNCC: 3 | RNVC: 2
F300 0T 000 5269: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-253-3648
Grand Verin De Desa

142533648
31448: RNCC: 3 | RNVC: 2
31448B: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-253-9551
Extracteur Special

142539551
DLT071551: RNCC: 3 | RNVC: 2
DLT071551: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-343-1877
Extrac Barre Embout

143431877
212334: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-318-2188

5120-14-306-3773
Open End Wrench

143063773
RT21161: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-274-0602
Spanner Wrench

142740602
DLT001956: RNCC: 3 | RNVC: 2
DLT001956B: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-486-2834
Inj Pomp Regl Outil

144862834
P117190: RNCC: 3 | RNVC: 2

10 Mar 1997

5120-14-506-2586
Open End Wrench

145062586
08110121152: RNCC: 3 | RNVC: 2

16 Apr 1998

5120-14-503-3514
Socket Head Screw Key

145033514
663300: RNCC: 3 | RNVC: 2
1121216K00: RNCC: 5 | RNVC: 2

13 Jan 1998

5120-14-526-9780
Hand Blind Riveter

145269780
BRK01: RNCC: 3 | RNVC: 2
235 119 00 000: RNCC: 5 | RNVC: 2

19 Sep 2001

5120-14-406-8053
Screw Thread Insert Inserter

144068053
01500730000: RNCC: 3 | RNVC: 2

8 Jan 1986

5120-14-514-0102
Open End Wrench

145140102
ENFD29159-14X16: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-297-7690
Spanner Wrench

142977690
6800-2213: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-327-4920

5120-14-204-9570

5120-14-225-8916

5120-14-373-8868
Spanner Wrench

143738868
16299901: RNCC: 1 | RNVC: 2
65-2-01-044A48-000000-2200: RNCC: 3 | RNVC: 2
0403012D00: RNCC: 5 | RNVC: 2
16299901: RNCC: 5 | RNVC: 9

8 Dec 1981

5120-14-488-5585
Retaining Ring Pliers

144885585
179E.18: RNCC: 3 | RNVC: 2
3148511412930: RNCC: 5 | RNVC: 2
179E18: RNCC: 5 | RNVC: 2
0141293: RNCC: 5 | RNVC: 2

21 May 1997

5120-14-291-8155
Socket Wrench Socket

142918155
NS.14: RNCC: 3 | RNVC: 2
3148510420608: RNCC: 5 | RNVC: 2
NS14: RNCC: 5 | RNVC: 2
0042060: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-462-1715
Montage Deflecteur

144621715
7-010560-6: RNCC: 3 | RNVC: 2
7-010560-6: RNCC: 5 | RNVC: 9

13 Apr 1993

5120-14-532-2530
Socket Wrench Socket

145322530
SJ.9: RNCC: 3 | RNVC: 2

23 Oct 2002

5120-14-410-6340
Outil Pose Tube Bou

144106340
P4-9: RNCC: 3 | RNVC: 2
P4-9: RNCC: 5 | RNVC: 9

9 Jul 1986

5120-14-542-7796
Socket Wrench Ratchet Attachment

145427796
S.155: RNCC: 3 | RNVC: 2
8054897Y00: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-504-6591
Socket Wrench Ratchet Attachment

145046591
S.372V: RNCC: 3 | RNVC: 2
3148510589039: RNCC: 5 | RNVC: 2
SYQ0092: RNCC: 5 | RNVC: 2
0058903: RNCC: 5 | RNVC: 9

25 Feb 1998

5120-14-483-1196
Socket Wrench Socket

144831196
J.5/8LA: RNCC: 3 | RNVC: 2
3148510283517: RNCC: 5 | RNVC: 2
0028351: RNCC: 5 | RNVC: 9

9 Aug 1996

5120-14-276-8002

5120-14-243-6152

5120-14-444-5662
Butee

144445662
HTP322: RNCC: 3 | RNVC: 9

15 Jan 1991

5120-14-420-8486
Tournevis

144208486
30000-90090: RNCC: 3 | RNVC: 2

16 Dec 1987

5120-14-425-9204
Open End Wrench

144259204
60897228: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-490-6933
File

144906933
241 F 01490 000: RNCC: 3 | RNVC: 2
F300 0T 000 1063: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-468-4225
Pistolet Hyper

144684225
96179140: RNCC: 3 | RNVC: 2

28 Feb 1994

5120-14-391-6575
Combination Box And Open End Wrench Set

143916575
0528986: RNCC: 3 | RNVC: 2
41.JE22: RNCC: 5 | RNVC: 2
41JE22: RNCC: 5 | RNVC: 2
F300 0T 017 7005: RNCC: 6 | RNVC: 9

21 Mar 1984

5120-14-539-3118
Bearing And Bushing Inserter And Remover

145393118
T636G3001101: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-223-7053

5120-14-216-7227

5120-14-414-6678
Cable Tie Installation Tool

144146678
MK6: RNCC: 3 | RNVC: 2
110-06000: RNCC: 5 | RNVC: 2
4CATWT3MK6MK21: RNCC: 5 | RNVC: 2
MK6MANUEL: RNCC: 5 | RNVC: 2
85-693-2153: RNCC: 6 | RNVC: 9

23 Feb 1987

5120-14-282-8268
Spanner Wrench

142828268
N32432-02-254: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-578-2538
Socket Head Screw Key

145782538
AWSH3X75: RNCC: 3 | RNVC: 2
0774495: RNCC: 5 | RNVC: 2
3148517744950: RNCC: 5 | RNVC: 2

15 Nov 2013

5120-14-569-4246
Torque Wrench Adapter

145694246
M5000928: RNCC: 3 | RNVC: 2

14 Sep 2011

5120-14-228-0791
Bloc De Pre-Sertiss

142280791
RMPS4F8X1M: RNCC: 3 | RNVC: 2
RMPS4F6X8M: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-217-0036
Extracteur De Roule

142170036
ADC51947-0PP0SEATTAQUE: RNCC: 3 | RNVC: 2
ADC519470PP0SEATTAQUE: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-262-8113
Minahouet

142628113
14-15-16: RNCC: 2 | RNVC: 2

1 Jan 1970

5120-14-263-8203

5120-14-339-4622

5120-14-344-2408

5120-14-390-2970
Joint Chargeur

143902970
MGE307-41: RNCC: 3 | RNVC: 2

26 Jan 1984

5120-14-386-8440
Spanner Wrench

143868440
405087: RNCC: 3 | RNVC: 2
85-692-4012: RNCC: 6 | RNVC: 9

24 Aug 1983

5120-14-350-0256
Mechanical Puller Attachment

143500256
3130S95-66-004: RNCC: 3 | RNVC: 2

14 Jun 1978

5120-14-283-1683
Cle Speciale

142831683
761-3M735P16: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-232-7993
Socket Wrench Adapter-Extension

142327993
15137T11: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-575-1870
Socket Head Screw Key

145751870
82507899000: RNCC: 3 | RNVC: 1

19 Mar 2013

5120-14-249-0660

5120-14-423-0258
Six Point Tip Screwdriver

144230258
ACZX.20X100: RNCC: 3 | RNVC: 2
ACZX20X100: RNCC: 5 | RNVC: 2
ACZX.20X100: RNCC: 5 | RNVC: 2
0004104: RNCC: 5 | RNVC: 2
ACX.20: RNCC: 5 | RNVC: 2
ACX20: RNCC: 5 | RNVC: 2
1040595D00: RNCC: 5 | RNVC: 2
SYQ5180: RNCC: 5 | RNVC: 2

31 Mar 1988

5120-14-552-8430
Retaining Ring Pliers

145528430
179E.19: RNCC: 3 | RNVC: 2
3148511412947: RNCC: 5 | RNVC: 2
179E.19: RNCC: 5 | RNVC: 2

7 Feb 2007

5120-14-539-7909
Combination Box And Open End Wrench

145397909
37.7: RNCC: 3 | RNVC: 9
3148510987606: RNCC: 5 | RNVC: 9

10 Feb 2004

5120-14-489-3835
Spanner Wrench

144893835
380945-1: RNCC: 3 | RNVC: 9

16 Jul 1997

5120-14-222-7173
Open End Wrench

142227173
16-1 1-16X1 1-8: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-425-5976
Socket Wrench Extension

144255976
J.209: RNCC: 3 | RNVC: 2
J.209: RNCC: 5 | RNVC: 2
3148510288956: RNCC: 5 | RNVC: 2
J209: RNCC: 5 | RNVC: 2
91739695: RNCC: 5 | RNVC: 2
CAE00917: RNCC: 5 | RNVC: 2
0713 128 103: RNCC: 5 | RNVC: 2
0028895: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-233-6942

5120-14-316-6635

5120-14-226-0658

5120-14-381-6330
Curette De Chambre

143816330
21C9540: RNCC: 3 | RNVC: 2

25 Jan 1983

5120-14-219-0992
Cle De Reglage Daig

142190992
536MF10DET39: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-440-0679
Outil Monte Joint

144400679
02640915800: RNCC: 3 | RNVC: 2

10 Jul 1990

5120-14-255-2285
Extracteur

142552285
1671T: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-395-2080

5120-14-345-9136

5120-14-375-7434

5120-14-248-0436
Cle Immobilisation

142480436
30446: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-334-0565
Cle De Deverrouilla

143340565
AFX194AD3: RNCC: 3 | RNVC: 2

23 Apr 1976

5120-14-363-9593
Mandrin Demmancheme

143639593
16380888: RNCC: 3 | RNVC: 2
16380888: RNCC: 5 | RNVC: 9

7 Aug 1980

5120-14-222-6153

5120-14-273-8171

5120-14-393-8835

5120-14-427-2028
Extracteur Etrier

144272028
46AM004-02-0001: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-368-4605

5120-14-339-0181

5120-14-461-7039
Socket Wrench Socket

144617039
20050: RNCC: 3 | RNVC: 2

24 Mar 1993

5120-14-373-4929
Mandrin Special

143734929
214979: RNCC: 3 | RNVC: 2

21 Oct 1981

5120-14-314-4287
Tige Tournevis

143144287
128133: RNCC: 3 | RNVC: 2
228133: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-224-2540
Combination Box And Open End Wrench

142242540
40.11/16: RNCC: 3 | RNVC: 2
50-11/16: RNCC: 3 | RNVC: 2
3148511008409: RNCC: 5 | RNVC: 2
40 11-16: RNCC: 5 | RNVC: 2
40-11-16: RNCC: 5 | RNVC: 2
3272670281684: RNCC: 5 | RNVC: 2
50 11-16: RNCC: 5 | RNVC: 2
0713 303 08: RNCC: 5 | RNVC: 2
40.11/16: RNCC: 5 | RNVC: 2
0100840: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-438-9628
Spanner Wrench

144389628
330A98-2146-20: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-518-4165
Plug Electrical Connector Extractor

145184165
MP6816-04: RNCC: 3 | RNVC: 9

4 Feb 2000

5120-14-278-7892

5120-14-316-6680

5120-14-534-2209
Socket Wrench Extension

145342209
R.210S: RNCC: 3 | RNVC: 2
52602: RNCC: 5 | RNVC: 2
0183475P00: RNCC: 5 | RNVC: 2

17 Mar 2003

5120-14-529-6602
Socket Wrench Screwdriver Attachment

145296602
RSC.4: RNCC: 3 | RNVC: 2
3148510532677: RNCC: 5 | RNVC: 2

4 Apr 2002

5120-14-521-6346
Socket Wrench Screwdriver Attachment

145216346
RHC.8: RNCC: 3 | RNVC: 2
0050475: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-299-2996
Spanner Wrench

142992996
28182-2: RNCC: 3 | RNVC: 2
28182-2: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-425-5968
Combination Box And Open End Wrench

144255968
39.1/4: RNCC: 3 | RNVC: 2
3148510999081: RNCC: 5 | RNVC: 2
1118230E00: RNCC: 5 | RNVC: 2
91639869: RNCC: 5 | RNVC: 2
0099908: RNCC: 5 | RNVC: 9

12 Jul 1988

5120-14-458-6717
Flat Tip Screwdriver

144586717
0010110: RNCC: 3 | RNVC: 2
AR.5,5X125VS: RNCC: 5 | RNVC: 2
H24140: RNCC: 5 | RNVC: 2
AR.5,5X125VSE: RNCC: 5 | RNVC: 9

29 Oct 1992

5120-14-531-5472
Socket Wrench Socket

145315472
S.34: RNCC: 3 | RNVC: 2
3148510537559: RNCC: 5 | RNVC: 2

28 Aug 2002

5120-14-516-9026
Screwdriver Bit

145169026
ETRI.105: RNCC: 3 | RNVC: 2

20 Oct 1999

5120-14-553-8591
Socket Head Screw Key

145538591
M15100: RNCC: 3 | RNVC: 2
B02CDI236085: RNCC: 5 | RNVC: 2

24 May 2007

5120-14-370-4881
Butee Sertissage

143704881
65878: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-297-1286
Spanner Wrench

142971286
PR46560: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-225-8908

5120-14-253-7186

5120-14-228-5180

5120-14-301-0986
Butee De Reglage

143010986
330A31-1488-20: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-410-5710
Hand Pipe And Sewer Auger

144105710
NO PRIMARY REF14-410-5710: RNCC: 3 | RNVC: 2
412A1319: RNCC: 5 | RNVC: 2

9 Jul 1986

5120-14-341-5352
Extracteur Cartes

143415352
95D11281: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-553-2121
Out Virole Chargeur

145532121
037652: RNCC: 3 | RNVC: 2
37652: RNCC: 5 | RNVC: 2

14 Mar 2007

5120-14-245-8381
Extracteur De Turbi

142458381
E160E358: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-245-1789
Cle A Oeil Speciale

142451789
G1-15-289-110: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-501-7890

5120-14-501-7829

5120-14-390-3197
Spanner Wrench

143903197
01-90900-025: RNCC: 3 | RNVC: 2
01-90-900-025: RNCC: 5 | RNVC: 2
85-692-4855: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-441-2282
Bearing And Bushing Inserter And Remover

144412282
6803G39-0008-00: RNCC: 3 | RNVC: 2

22 Aug 1990

Load More Results