What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 67 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 67 of 110

5120-14-542-9383
Valve Spring Lifter

145429383
8460010: RNCC: 3 | RNVC: 2
8460010: RNCC: 5 | RNVC: 2

14 Aug 2004

5120-14-253-9692
Spanner Wrench

142539692
PR47370: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-449-1784
Piston Ring Expander

144491784
26145900002: RNCC: 3 | RNVC: 2
43379728: RNCC: 5 | RNVC: 2
55145900008: RNCC: 5 | RNVC: 2

31 Jul 1991

5120-14-541-9003
Screwdriver Bit Set And Handle

145419003
45248471: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-403-2882
Electrical Card Extractor

144032882
092U00-639638D: RNCC: 3 | RNVC: 2

7 Aug 1985

5120-14-409-1478
Outil Monte Filtre

144091478
26545905100: RNCC: 3 | RNVC: 2
265459051: RNCC: 5 | RNVC: 9

16 Apr 1986

5120-14-560-1952
Retaining Ring Installation Tool

145601952
10721406: RNCC: 3 | RNVC: 2

1 Apr 2009

5120-14-359-7530
Maintien Pi Mandrin

143597530
A132500: RNCC: 3 | RNVC: 2
100498: RNCC: 5 | RNVC: 2

15 Oct 1979

5120-14-269-5801

5120-14-335-1440
Materiel Demont But

143351440
AS34BB9C: RNCC: 3 | RNVC: 2

3 Jun 1976

5120-14-416-7580
Rondelle Dappui

144167580
537427: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-486-5688
Outil

144865688
RT22435: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-490-9644
Chasse Goupi

144909644
4388 353 294 687: RNCC: 3 | RNVC: 2
F300 0T 000 8020: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-564-9208
Socket Wrench

145649208
92A.21: RNCC: 3 | RNVC: 2
3148516630667: RNCC: 5 | RNVC: 2
663066: RNCC: 5 | RNVC: 2

17 Jun 2010

5120-14-352-7136
Screwdriver Bit

143527136
L-12: RNCC: 3 | RNVC: 2
L12: RNCC: 3 | RNVC: 2
3272670223554: RNCC: 5 | RNVC: 2

14 Nov 1978

5120-14-412-0172
Spanner Wrench

144120172
MN7062RUF1/1-105DN50: RNCC: 3 | RNVC: 2

24 Sep 1986

5120-14-388-9027
Outil Manutention A

143889027
16168143: RNCC: 3 | RNVC: 2
16168143: RNCC: 5 | RNVC: 9

29 Nov 1983

5120-14-490-9494
Trousse

144909494
4280 317 000 009: RNCC: 3 | RNVC: 2
F300 0T 000 7239: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-229-1755
Tournevis Double Eq

142291755
12502193: RNCC: 3 | RNVC: 2
12502193: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-444-9502
Screwdriver Bit

144449502
0024596: RNCC: 3 | RNVC: 2
ES.106: RNCC: 5 | RNVC: 2
ES106: RNCC: 5 | RNVC: 2

29 Jan 1991

5120-14-306-4352
Detent Handling Tool

143064352
8811290001: RNCC: 3 | RNVC: 2
8811633002: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-299-7109
Socket Wrench Socket

142997109
NS.19: RNCC: 3 | RNVC: 2
7419M: RNCC: 3 | RNVC: 2
0714 13 09: RNCC: 5 | RNVC: 2
0714 13 20: RNCC: 5 | RNVC: 2
3148510421100: RNCC: 5 | RNVC: 2
NS19: RNCC: 5 | RNVC: 2
0042110: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-529-0861
Screwdriver Bit Set And Handle

145290861
637050: RNCC: 3 | RNVC: 2
SYQ0900: RNCC: 5 | RNVC: 2
3032546370504: RNCC: 5 | RNVC: 2

7 Mar 2002

5120-14-317-2264

5120-14-493-5611
Cle

144935611
4122: RNCC: 3 | RNVC: 2
F300 0T 013 5632: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-325-4231
Screwdriver Handle

143254231
0002220: RNCC: 3 | RNVC: 2
AAMA-M: RNCC: 5 | RNVC: 2
AAMA.M: RNCC: 5 | RNVC: 2
AAMM: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-212-0493
Engine Valve Seat Insert Knockout Tool

142120493
32534: RNCC: 3 | RNVC: 9

5 Jul 1980

5120-14-462-9866
Boite De Rangemenen

144629866
T700A7199000003: RNCC: 3 | RNVC: 2

12 May 1993

5120-14-449-5868
Socket Wrench Socket Set

144495868
0516280: RNCC: 3 | RNVC: 2
S.421 E: RNCC: 5 | RNVC: 2

28 Aug 1991

5120-14-291-3487
Screw Thread Insert Extractor

142913487
206089: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-041-8333
Socket Head Screw Key

140418333
80796: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-578-1265
Cross Tip Screwdriver

145781265
AND.J5: RNCC: 3 | RNVC: 2
3148517866997: RNCC: 5 | RNVC: 2

4 Nov 2013

5120-14-570-2426
Bearing Staking Installation Tool

145702426
UFA31580: RNCC: 3 | RNVC: 2

1 Dec 2011

5120-14-387-2249

5120-14-229-8595

5120-14-264-7898

5120-14-428-5328
Graissage Montage

144285328
MMG060-23: RNCC: 3 | RNVC: 2
MMG060-23: RNCC: 5 | RNVC: 2

8 Dec 1988

5120-14-499-9438
Cle Speciale

144999438
562459: RNCC: 3 | RNVC: 2
F300 0T 023 9384: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-323-2070

5120-14-403-8049
Flat Tip Screwdriver

144038049
91468118: RNCC: 3 | RNVC: 9
26101920: RNCC: 5 | RNVC: 2

21 Aug 1985

5120-14-302-6707
Open End Wrench

143026707
RACC53: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-404-8329
Electrical Contact Remover

144048329
282929: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-368-3810
Spanner Wrench

143683810
20256350: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-429-6614
Bearing And Bushing Inserter

144296614
007235080P: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-14-368-0735
Socket Wrench Socket

143680735
NG.75: RNCC: 3 | RNVC: 2
3148510348506: RNCC: 5 | RNVC: 2
NG75: RNCC: 5 | RNVC: 2
0034850: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-368-6868
Spanner Wrench

143686868
300A96780: RNCC: 3 | RNVC: 2
91372363: RNCC: 5 | RNVC: 2
300A96780: RNCC: 5 | RNVC: 2
300A96780: RNCC: 5 | RNVC: 9
300A96780: RNCC: 5 | RNVC: 9

10 Mar 1981

5120-14-529-4623
Open End Wrench

145294623
6501CFC: RNCC: 3 | RNVC: 2

29 Mar 2002

5120-14-530-5327
Socket Wrench Screwdriver Attachment

145305327
SX.60: RNCC: 3 | RNVC: 2

18 Jun 2002

5120-14-317-0698
Open End Wrench

143170698
589211: RNCC: 3 | RNVC: 9

1 Jan 1975

5120-14-509-1225
Socket Head Screw Key

145091225
00101288: RNCC: 3 | RNVC: 2
160: RNCC: 5 | RNVC: 9

21 Oct 1998

5120-14-524-8921
Socket Wrench Socket

145248921
SJ.17: RNCC: 3 | RNVC: 2

25 Apr 2001

5120-14-524-8922
Socket Wrench Socket

145248922
SJ.19: RNCC: 3 | RNVC: 2

25 Apr 2001

5120-14-415-8168
Wrench Extension Handle

144158168
HRT524: RNCC: 3 | RNVC: 2
24A: RNCC: 5 | RNVC: 2

21 May 1987

5120-14-446-7142
Bearing And Bushing Inserter And Remover

144467142
39382895: RNCC: 3 | RNVC: 2
39382895: RNCC: 5 | RNVC: 9

9 Apr 1991

5120-14-316-1571
Douille Emmanc Defl

143161571
AML358779M112: RNCC: 3 | RNVC: 2
100802: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-511-7327
Eta Base Pivotante

145117327
1223.125S: RNCC: 3 | RNVC: 2
225753: RNCC: 5 | RNVC: 2
3148512257530: RNCC: 5 | RNVC: 2
2695 54 225: RNCC: 5 | RNVC: 2

13 Jan 1999

5120-14-239-8113

5120-14-302-5094

5120-14-559-6091
Mechanical Puller

145596091
8813145000: RNCC: 3 | RNVC: 2

2 Feb 2009

5120-14-223-7054

5120-14-558-0421
Flat Tip Screwdriver

145580421
ANF6,5X100: RNCC: 3 | RNVC: 2
91883647: RNCC: 5 | RNVC: 2

25 Aug 2008

5120-14-272-4059
Polygonale Cle

5120-14-430-2680
Cross Tip Screwdriver

144302680
ACZP.2X125: RNCC: 3 | RNVC: 2
ACP.2X125: RNCC: 5 | RNVC: 2
1011802S00: RNCC: 5 | RNVC: 2
3148510040738: RNCC: 5 | RNVC: 2
ACP-2X125: RNCC: 5 | RNVC: 2
91634818: RNCC: 5 | RNVC: 2
162-7583: RNCC: 5 | RNVC: 2
0004073: RNCC: 5 | RNVC: 9
FACOMACP.2X125: RNCC: 5 | RNVC: 9

15 Mar 1989

5120-14-201-9580
Open End Wrench

142019580
33-28X30SERIELUXE: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-491-1965
Pontet

144911965
NO PRIMARY REF14-491-1965: RNCC: 3 | RNVC: 2
7831: RNCC: 5 | RNVC: 9
F300 0T 001 8478: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-238-1225

5120-14-293-2664

5120-14-041-6878
Spanner Wrench

140416878
15161513: RNCC: 3 | RNVC: 2
15161513: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-466-3738
Spring Inserter And Remover

144663738
AC21974: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-397-8661
Socket Wrench Socket

143978661
005654210P: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-530-1280
Socket Wrench Screwdriver Attachment

145301280
NSX.60A: RNCC: 3 | RNVC: 2
3148515106613: RNCC: 5 | RNVC: 2

17 May 2002

5120-14-313-4676
Socket Head Screw Key Set

143134676
76.JN8: RNCC: 3 | RNVC: 2
3148515324406: RNCC: 5 | RNVC: 2
76JN8: RNCC: 5 | RNVC: 2
91615854: RNCC: 5 | RNVC: 2
0532440: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-340-3947
Electrical Contact Inserter

143403947
91066-3: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-468-7085
Socket Wrench Screwdriver Attachment

144687085
0514457: RNCC: 3 | RNVC: 2
3148515144578: RNCC: 5 | RNVC: 2
RX.27: RNCC: 5 | RNVC: 2
RX27: RNCC: 5 | RNVC: 2

16 Mar 1994

5120-14-378-3142
Retaining Ring Pliers

143783142
CED0: RNCC: 3 | RNVC: 2

20 Jul 1982

5120-14-506-9669
Retaining Ring Pliers

145069669
177G.13: RNCC: 3 | RNVC: 2
177G.13: RNCC: 5 | RNVC: 2
3148511408513: RNCC: 5 | RNVC: 2
0140851: RNCC: 5 | RNVC: 2
0714 02 57: RNCC: 5 | RNVC: 2

27 May 1998

5120-14-450-3547
Socket Head Screw Key

144503547
0123809: RNCC: 3 | RNVC: 2
83.S3: RNCC: 5 | RNVC: 2

1 Oct 1991

5120-14-419-2232
Tube Packing Ring Installing Tool

144192232
8815182000: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-388-7402
Open End Wrench

143887402
8814299000: RNCC: 3 | RNVC: 2

3 Nov 1983

5120-14-399-8849
Socket Head Screw Key

143998849
338048: RNCC: 3 | RNVC: 2
338048: RNCC: 5 | RNVC: 9

11 Apr 1985

5120-14-456-8209
Bearing And Bushing Remover

144568209
45057792: RNCC: 3 | RNVC: 2
45057792: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-307-4015

5120-14-529-8527
Detent Handling Tool

145298527
7107-1460-049: RNCC: 3 | RNVC: 2
YM1100A00: RNCC: 5 | RNVC: 2

17 Apr 2002

5120-14-562-8511
Box Wrench

145628511
261321163: RNCC: 3 | RNVC: 2

26 Nov 2009

5120-14-314-2324
Spanner Wrench

143142324
160-888051: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-552-5381
Socket Wrench Socket

145525381
NSB.18: RNCC: 3 | RNVC: 2
NSB.18: RNCC: 5 | RNVC: 2
3148510456188: RNCC: 5 | RNVC: 2

12 Jan 2007

5120-14-232-8004
Spanner Wrench

142328004
15821T3: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-493-0032
Meche

144930032
4061 551 163 220: RNCC: 3 | RNVC: 2
F300 0T 009 4360: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-241-6086

5120-14-436-0208
Preformed Packing Inserter

144360208
806273: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-380-8411
Potence Adaptateur

143808411
F21989: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-458-6788
Reglage Manivelle

144586788
556723: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-491-8456
Cle

144918456
417157380001: RNCC: 3 | RNVC: 2
F300 0T 005 1066: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-552-9722
Socket Wrench Socket Set

145529722
40.J4PB: RNCC: 3 | RNVC: 2
3148515888250: RNCC: 5 | RNVC: 2

20 Feb 2007

5120-14-539-8620
Combination Box And Open End Wrench

145398620
37.12: RNCC: 3 | RNVC: 9
3148510987705: RNCC: 5 | RNVC: 9

13 Feb 2004

5120-14-433-1406
Bearing And Bushing Inserter And Remover

144331406
45153240: RNCC: 3 | RNVC: 2

11 Jul 1989

5120-14-484-6512
Socket Wrench Screwdriver Attachment

144846512
0514420: RNCC: 3 | RNVC: 2

28 Nov 1996

5120-14-422-0117
Screwdriver Bit

144220117
0025206: RNCC: 3 | RNVC: 2
ET.606: RNCC: 5 | RNVC: 2
ET606: RNCC: 5 | RNVC: 2

16 Feb 1988

5120-14-292-0778

5120-14-212-0499

5120-14-264-7977
Open End Wrench

142647977
MAT196-0066F15: RNCC: 3 | RNVC: 2
GSM196-011F18: RNCC: 5 | RNVC: 2
GSM196-11F18: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-506-7642
De Montage Outil

145067642
M12110: RNCC: 3 | RNVC: 2

14 May 1998

5120-14-221-8799
Cle Axe Damortisseu

142218799
92540: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-313-7271
Faux Mors

143137271
C47021: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-221-9673

5120-14-347-8844
Pince Serti Deserti

143478844
8811024000: RNCC: 3 | RNVC: 2

1 Mar 1978

5120-14-298-4561

5120-14-241-6027

5120-14-253-3860
Poignee Pour Cle

142533860
044BBC14BPL2PC17: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-200-4414
Socket Wrench Socket

142004414
S-23: RNCC: 3 | RNVC: 2
S23: RNCC: 3 | RNVC: 2
S.23: RNCC: 3 | RNVC: 2
250-5030: RNCC: 5 | RNVC: 2
0712 133 123: RNCC: 5 | RNVC: 2
3148510536507: RNCC: 5 | RNVC: 2
S23: RNCC: 5 | RNVC: 2
3272670296022: RNCC: 5 | RNVC: 2
FACOMS.23: RNCC: 5 | RNVC: 9
0053650: RNCC: 5 | RNVC: 9

1 Jan 1962

5120-14-390-3052
Spanner Wrench

143903052
534985: RNCC: 3 | RNVC: 9
85-692-4772: RNCC: 6 | RNVC: 9

26 Jan 1984

5120-14-237-4668
Obus Demmanchement

142374668
3130S95-12-011-1: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-386-6034
Expansible A Epaule

143866034
9970-115-525: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-245-3273
Outil De Serrage

142453273
8201-32: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-248-7489
Manchon Special

142487489
G1-15-663: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-410-5683
Spanner Wrench

144105683
0003-3677-000: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-485-7340
Mechanical Puller Attachment

144857340
332A93-3681-21: RNCC: 3 | RNVC: 2

6 Feb 1997

5120-14-032-3501
Corps D'outil

140323501
23018: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-483-0776
Griffe De Serrage

144830776
D56384: RNCC: 3 | RNVC: 2

8 Aug 1996

5120-14-416-7464
Percage Gabarit

144167464
536850: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-232-4945

5120-14-573-6086
Geared Socket Wheel Stud Nut Wrench

145736086
T651J3001102: RNCC: 3 | RNVC: 2

24 Oct 2012

5120-14-212-0016
Outillage Daligneme

142120016
28015191: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-564-5237
Pliers

145645237
185.20 AVSE: RNCC: 3 | RNVC: 2
142251: RNCC: 5 | RNVC: 2

4 May 2010

5120-14-506-3979
Adaptateur Serrage

145063979
OUT104069T: RNCC: 3 | RNVC: 2
4069T: RNCC: 3 | RNVC: 2

22 Apr 1998

5120-14-348-8375
Bague De Retreint

143488375
D47692: RNCC: 3 | RNVC: 2

19 Apr 1978

5120-14-296-6135

5120-14-241-6014

5120-14-272-8656
Arrache-Cabochon

142728656
AK0288: RNCC: 3 | RNVC: 2
AK0288: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-490-9606
Cle

144909606
4380 892 382 001: RNCC: 3 | RNVC: 2
F300 0T 000 7677: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-321-9912
Cle Corps De Palier

143219912
02640901400: RNCC: 3 | RNVC: 2
026409014: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-241-4206

5120-14-419-2556
Geared Socket Wheel Stud Nut Wrench

144192556
26378: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-457-8438
Socket Wrench Socket

144578438
M4HZ7101947121: RNCC: 3 | RNVC: 2

24 Sep 1992

5120-14-538-4204
Solid Center Punch

145384204
NGM0010036900390: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-223-3003

5120-14-514-0125
Open End Wrench

145140125
ENFD29159-19X21: RNCC: 3 | RNVC: 2

22 Apr 1999

5120-14-438-7774
Face Spanner Wrench Socket

144387774
330A93-3320-20: RNCC: 3 | RNVC: 2

4 Apr 1990

5120-14-564-1427
Spanner Wrench

145641427
430824: RNCC: 3 | RNVC: 2

12 Apr 2010

5120-14-570-6380
Seal Inserter And Remover

145706380
001 SLM BREST 2011: RNCC: 3 | RNVC: 2

13 Jan 2012

5120-14-428-5949
Equipee Bague

144285949
4601EAV101: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-540-4474
Open End Wrench

145404474
102100-23: RNCC: 3 | RNVC: 9

27 Mar 2004

5120-14-331-3335

5120-14-570-7641
Cross Tip Screwdriver

145707641
TB-1P100: RNCC: 3 | RNVC: 2

23 Jan 2012

5120-14-338-4806
Cone De Montage

143384806
S16-0607-1560: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-368-4121
Spanner Wrench

143684121
Z0102-765: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-359-6704
Extracteur Mandrin

143596704
BE012303: RNCC: 3 | RNVC: 2
BE012303: RNCC: 5 | RNVC: 9
BE012303: RNCC: 5 | RNVC: 9

15 Oct 1979

5120-14-396-4120
Empilage Outil

143964120
6274-51010: RNCC: 3 | RNVC: 2
6274-2500120: RNCC: 5 | RNVC: 2

27 Nov 1984

5120-14-323-2001
Pointe A Crocheter

143232001
1438: RNCC: 3 | RNVC: 2
85-679-4920: RNCC: 6 | RNVC: 9

1 Jan 1975

5120-14-574-2411
Mechanical Puller

145742411
U.32T15-50: RNCC: 3 | RNVC: 2
3148510680743: RNCC: 5 | RNVC: 2
68074: RNCC: 5 | RNVC: 2

18 Dec 2012

5120-14-298-7814
Sand And Gravel Scoop

142987814
108-02-05: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-401-4738
Potenti Cle Reglage

144014738
853-100-123-0: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-279-8428
Plaque Centrale Ar

142798428
8810565002: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-491-0197
Jauge

144910197
4602 009 600 006: RNCC: 3 | RNVC: 2
F300 0T 001 0991: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-255-2279

5120-14-392-0887

5120-14-440-6678
Hand Blind Riveter

144406678
PRG711: RNCC: 3 | RNVC: 2
PRG711: RNCC: 5 | RNVC: 9

18 Jul 1990

5120-14-237-9823
Spanner Wrench

142379823
B02203: RNCC: 3 | RNVC: 2
0000330389: RNCC: 5 | RNVC: 2
0000330389: RNCC: 5 | RNVC: 9
330389: RNCC: 5 | RNVC: 9

1 Jan 1967

5120-14-251-1367
Impact Type Bit Set And Handle Screwdriver

142511367
0UTILT0URNEVIS: RNCC: 3 | RNVC: 9
102265: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-533-1279
Socket Wrench Socket

145331279
OCE 83.30 H: RNCC: 3 | RNVC: 2
83.30 H: RNCC: 5 | RNVC: 2

23 Jan 2003

5120-14-491-0118
Cle A C

144910118
4602 007 200 006: RNCC: 3 | RNVC: 2
F300 0T 001 0904: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-456-8025
Embouts Guide Culas

144568025
8-0115C: RNCC: 3 | RNVC: 2

24 Jul 1992

5120-14-373-7765
Matrice Sertissage

143737765
476409: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-352-1704

5120-14-472-6151
Outillage Serrage

144726151
MAT196-0241F3: RNCC: 3 | RNVC: 2

4 Nov 1994

5120-14-312-1803
Spanner Wrench

143121803
3130S95-51-070: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-398-1278
Bearing And Bushing Remover

143981278
330A98-3351-02: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-408-9637

5120-14-407-2753

5120-14-576-1395
Cross Tip Screwdriver

145761395
ANP1X75: RNCC: 3 | RNVC: 2
3148517733114: RNCC: 5 | RNVC: 2
773311: RNCC: 5 | RNVC: 2

31 May 2013

5120-14-363-6033

5120-14-567-1618
Socket Wrench Socket

145671618
NS.19LA: RNCC: 3 | RNVC: 2
655496: RNCC: 5 | RNVC: 2
3148516554963: RNCC: 5 | RNVC: 2

16 Feb 2011

5120-14-233-6099

5120-14-555-7528
Ball Joint Installation Tool

145557528
350A93-3313-00: RNCC: 3 | RNVC: 2

11 Dec 2007

5120-14-518-9537
Poussoir Pour Bille

145189537
1105361X00: RNCC: 3 | RNVC: 2

1 Mar 2000

5120-14-217-2718

5120-14-294-4265
Socket Head Screw Key

142944265
NO PRIMARY REF14-294-4265: RNCC: 3 | RNVC: 2
22580E: RNCC: 5 | RNVC: 9
22580E: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-511-4354
Socket Wrench Handle

145114354
NO PRIMARY REF14-511-4354: RNCC: 3 | RNVC: 2
125C: RNCC: 5 | RNVC: 9
5120AA8011925: RNCC: 6 | RNVC: 9

16 Dec 1998

5120-14-454-2946
Sertissag Outillage

144542946
MMG070-18: RNCC: 3 | RNVC: 2
MMG070-18: RNCC: 5 | RNVC: 2

26 Mar 1992

5120-14-571-2997
Hand Hammer

145712997
203H.18: RNCC: 3 | RNVC: 2
FACOM 203H.18: RNCC: 5 | RNVC: 2

12 Mar 2012

5120-14-564-5132
Hand Shovel

145645132
A251400100003: RNCC: 3 | RNVC: 2
053816: RNCC: 5 | RNVC: 2

4 May 2010

5120-14-235-9520

5120-14-526-3810
Socket Wrench Socket

145263810
NKD.22A: RNCC: 3 | RNVC: 2
NKD.22: RNCC: 5 | RNVC: 2
5000262422: RNCC: 5 | RNVC: 2

25 Jul 2001

5120-14-214-3490
Cle Speciale Borne

142143490
013168: RNCC: 3 | RNVC: 2
13168: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-428-5232
Support Cle

144285232
MFG4402102: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-291-1858

5120-14-253-9390
Cle Pour Soupape De

142539390
NO PRIMARY REF14-253-9390: RNCC: 3 | RNVC: 2
21073: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-396-2333
Me Extracteur Bague

143962333
90890-02333: RNCC: 3 | RNVC: 2

27 Nov 1984

5120-14-311-4551
Tube Demmanchement

143114551
3160S95-66-055: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-371-4282
Spanner Wrench

143714282
6254-57332: RNCC: 3 | RNVC: 2

5 Aug 1981

5120-14-288-6971
Spanner Wrench

142886971
D1553-4800: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-450-5326
Dashpot Handling Tool

144505326
255175-02: RNCC: 3 | RNVC: 2
255175-02: RNCC: 5 | RNVC: 9

9 Oct 1991

5120-14-304-7910
Hand Blind Riveter

143047910
NO PRIMARY REF14-304-7910: RNCC: 3 | RNVC: 2
BVAP0LL0N: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-286-7821

5120-14-352-2006

5120-14-428-5340
Fixation Entretoise

144285340
MKA4492104: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-569-6057
Spanner Wrench

145696057
UFA33122: RNCC: 3 | RNVC: 2
14100081138: RNCC: 5 | RNVC: 2

4 Oct 2011

5120-14-272-3304

5120-14-498-7147
Cle

144987147
704609: RNCC: 3 | RNVC: 2
704609: RNCC: 5 | RNVC: 9
F300 0T 008 2041: RNCC: 6 | RNVC: 9

29 Oct 1997

5120-14-480-4010
Cle

144804010
230302: RNCC: 3 | RNVC: 2

7 Mar 1996

5120-14-232-8088

5120-14-493-6976
Outillage De Vidang

144936976
T60UT0043000: RNCC: 3 | RNVC: 2

13 Oct 1997

5120-14-258-2437

5120-14-217-2694

5120-14-385-9675
Spanner Wrench

143859675
139590D: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-520-9660
Adjustable Wrench

145209660
99352114: RNCC: 3 | RNVC: 9

27 Jun 2000

5120-14-339-0156

5120-14-326-0841
Screwdriver Bit Set And Handle

143260841
AMJ: RNCC: 3 | RNVC: 2
0007200: RNCC: 5 | RNVC: 2
3148510072005: RNCC: 5 | RNVC: 2
91352554: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-315-9080
Cle De Manoeuvre

143159080
2-14099: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-258-2289

5120-14-412-4073

5120-14-509-9189
Outil D'installatio

145099189
WP15: RNCC: 3 | RNVC: 9
5120AA1105811: RNCC: 6 | RNVC: 9

4 Nov 1998

5120-14-286-6828

5120-14-255-5124
Spanner Wrench

142555124
3210-97-31-070: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-343-8344

5120-14-229-8598

5120-14-319-4919

5120-14-217-9946
Torque Wrench Adapter

142179946
0D010: RNCC: 3 | RNVC: 2
0D010: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-567-1578
Retaining Ring Pliers

145671578
179A.18: RNCC: 3 | RNVC: 2
3148518230667: RNCC: 5 | RNVC: 2
823066: RNCC: 5 | RNVC: 2

16 Feb 2011

5120-14-428-5528
Equipe Curseur

144285528
MKG3712206: RNCC: 3 | RNVC: 2

8 Dec 1988

5120-14-331-4234
Spanner Wrench

143314234
TL404163P1: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-204-4576

5120-14-200-9453
Open End Wrench

142009453
3-1-5-16X1-1-2: RNCC: 3 | RNVC: 2

1 Jan 1962

5120-14-271-7956

5120-14-335-1439
Traverse Pr Demonta

143351439
AS34BB11AREP2: RNCC: 3 | RNVC: 2

3 Jun 1976

5120-14-270-9325

5120-14-319-4282

5120-14-567-1210
Torque Wrench Set

145671210
98F71203001022: RNCC: 3 | RNVC: 2

10 Feb 2011

5120-14-557-6120
Ratchet Wrench

145576120
1PM00289025: RNCC: 3 | RNVC: 2

27 Jun 2008

5120-14-489-4017
Open End Wrench

144894017
35-1-4BSF: RNCC: 3 | RNVC: 2
85-686-0367: RNCC: 6 | RNVC: 9

16 Jul 1997

5120-14-407-3228

5120-14-511-1067
Body And Fender Spoon

145111067
3210006: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-514-6980
Open End Wrench

145146980
SP.3108: RNCC: 3 | RNVC: 2

9 Jun 1999

5120-14-419-2601
Mechanical Puller Attachment

144192601
530617: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-375-1769
Spanner Wrench

143751769
16380164: RNCC: 3 | RNVC: 2
16380164: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-538-8804
Spanner Wrench

145388804
NGM0022030200434: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-297-1279
Spanner Wrench

142971279
PR46549: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-543-6062
Flat Tip Screwdriver

145436062
C04080109: RNCC: 3 | RNVC: 2
0000000132319: RNCC: 5 | RNVC: 2

24 Nov 2004

5120-14-454-4707
Torque Wrench Adapter

144544707
M4HZ7301432401: RNCC: 3 | RNVC: 2

2 Apr 1992

5120-14-443-3485
Ensemble Rallonges

144433485
98550617077: RNCC: 3 | RNVC: 2

19 Nov 1990

5120-14-288-9132

5120-14-442-3936
Spanner Wrench

144423936
94AM075: RNCC: 3 | RNVC: 2

15 Oct 1990

5120-14-419-2522
Electrical Contact Remover

144192522
BAZ0471: RNCC: 3 | RNVC: 2

16 Oct 1987

5120-14-466-3758
Spanner Wrench

144663758
M47079200: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-042-9456
Montage Dispositif

140429456
UFG231-22: RNCC: 3 | RNVC: 2

12 Nov 1981

5120-14-238-1395
Spanner Wrench

142381395
958775: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-397-4848
Gabarit De Cintrage

143974848
73011050: RNCC: 3 | RNVC: 2
73011053: RNCC: 5 | RNVC: 2
R073011053: RNCC: 5 | RNVC: 2
91710793: RNCC: 5 | RNVC: 2

14 Dec 1984

5120-14-291-1013

5120-14-356-4937
Piston Ring Compressor

143564937
NO PRIMARY REF14-356-4937: RNCC: 3 | RNVC: 2
146003: RNCC: 5 | RNVC: 9
347-101: RNCC: 5 | RNVC: 9

15 May 1979

5120-14-443-9574
Socket Wrench Socket

144439574
W271M: RNCC: 3 | RNVC: 9

17 Dec 1990

5120-14-281-2960
Faux Mors Cylindre

142812960
C46821: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-553-5309
Drift

145535309
39297066: RNCC: 3 | RNVC: 2

12 Apr 2007

5120-14-483-0607
Spanner Wrench

144830607
10445334: RNCC: 3 | RNVC: 2

8 Aug 1996

5120-14-465-4223
Socket Head Screw Key Blade

144654223
0034070: RNCC: 3 | RNVC: 2
NEX.50: RNCC: 3 | RNVC: 2

29 Sep 1993

5120-14-551-3857
Pliers

145513857
DM.91: RNCC: 3 | RNVC: 2

15 Sep 2006

5120-14-313-5816
Socket Wrench Crowfoot Attachment

143135816
C47296: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-450-3081
Pose-Depose Outil

144503081
35MS048: RNCC: 3 | RNVC: 2

25 Sep 1991

5120-14-394-9283
Socket Head Screw Key

143949283
39078922: RNCC: 3 | RNVC: 2

2 Oct 1984

5120-14-530-9201
Socket Wrench Spanner Attachment Set

145309201
134130: RNCC: 3 | RNVC: 2
118.EC8: RNCC: 5 | RNVC: 2
3148511341308: RNCC: 5 | RNVC: 2

17 Jul 2002

5120-14-297-1118
Spanner Wrench

142971118
1039-645D201: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-446-7148
Bearing And Bushing Inserter And Remover

144467148
39382904: RNCC: 3 | RNVC: 2
39382904: RNCC: 5 | RNVC: 9

9 Apr 1991

5120-14-361-7622
Socket Head Screw Key

143617622
253216: RNCC: 3 | RNVC: 2
253216: RNCC: 5 | RNVC: 9

20 Feb 1980

5120-14-503-5844
Socket Wrench Screwdriver Attachment

145035844
JT.6VSE: RNCC: 3 | RNVC: 2
3148510291833: RNCC: 5 | RNVC: 2
0029183: RNCC: 5 | RNVC: 9

21 Jan 1998

5120-14-274-8672
Cone Extenseur

142748672
R31674-14-18REP1: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-532-5964
Changement Mecanism

145325964
32520: RNCC: 3 | RNVC: 2
32520: RNCC: 5 | RNVC: 2
9880893: RNCC: 5 | RNVC: 2
9880893: RNCC: 5 | RNVC: 2

18 Nov 2002

5120-14-224-9899

5120-14-567-4180
Hand Terminal Crimping Tool

145674180
62000494: RNCC: 3 | RNVC: 2

15 Mar 2011

5120-14-306-4213
Spanner Wrench

143064213
C46020: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-385-9673
Spanner Wrench

143859673
139570G: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-455-4354
Mechanical Puller Attachment

144554354
415.25: RNCC: 3 | RNVC: 2
91729357: RNCC: 5 | RNVC: 2

21 May 1992

5120-14-397-8244

5120-14-516-9027
Screwdriver Bit

145169027
EP.632T: RNCC: 3 | RNVC: 2

20 Oct 1999

5120-14-521-5311
Socket Wrench Socket

145215311
NKB.34: RNCC: 3 | RNVC: 2
NKB34: RNCC: 5 | RNVC: 2

9 Aug 2000

5120-14-376-0488
Face Spanner Wrench Socket

143760488
TMY20-27-404: RNCC: 3 | RNVC: 2
85-691-8031: RNCC: 6 | RNVC: 9

30 Mar 1982

5120-14-505-5475
Flat Tip Screwdriver

145055475
ENFD6514-A0-6X3-5X100X185: RNCC: 3 | RNVC: 2

24 Mar 1998

5120-14-317-7967
Spanner Wrench

143177967
NO PRIMARY REF14-317-7967: RNCC: 3 | RNVC: 2
842867-79: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-450-2311
Mechanical Puller Attachment

144502311
MSU-OD-270: RNCC: 3 | RNVC: 2
45057879: RNCC: 5 | RNVC: 2

25 Sep 1991

5120-14-358-7200
Spanner Wrench

143587200
MHG112-23: RNCC: 3 | RNVC: 2
MHG112-23: RNCC: 5 | RNVC: 2

7 Sep 1979

5120-14-401-6061
Coquille De Serrage

144016061
NO PRIMARY REF14-401-6061: RNCC: 3 | RNVC: 2
0U141946: RNCC: 5 | RNVC: 9
OU141946: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-424-9781
Extrac Aiguille Jeu

144249781
30032: RNCC: 3 | RNVC: 2
30032: RNCC: 5 | RNVC: 2
85-693-6335: RNCC: 6 | RNVC: 9

16 Jun 1988

5120-14-578-3225
Special Purpose Combination Wrench

145783225
017-76: RNCC: 3 | RNVC: 2
8BN058: RNCC: 5 | RNVC: 2
5120MT0202313: RNCC: 6 | RNVC: 9

20 Nov 2013

5120-14-438-5080
Spanner Wrench

144385080
206478: RNCC: 3 | RNVC: 2
206478: RNCC: 5 | RNVC: 9
85-694-1869: RNCC: 6 | RNVC: 9

21 Mar 1990

5120-14-283-9716

5120-14-248-2362
Extracteur Lampe

142482362
EA14843: RNCC: 3 | RNVC: 9
D278: RNCC: 5 | RNVC: 2
TL1235: RNCC: 5 | RNVC: 2
EA14843B: RNCC: 5 | RNVC: 9

1 Jan 1968

5120-14-227-3437
Outillage De Reglag

142273437
910152001: RNCC: 3 | RNVC: 9
T323: RNCC: 5 | RNVC: 9

1 Jan 1966

5120-14-569-0377
Mechanical Puller

145690377
F27398000: RNCC: 3 | RNVC: 2
F27398000: RNCC: 5 | RNVC: 2

1 Aug 2011

5120-14-496-2955

5120-14-238-1421
Spanner Wrench

142381421
951632-30: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-302-5051
Cle Reglage Bras

143025051
NO PRIMARY REF14-302-5051: RNCC: 3 | RNVC: 2
42-27-04-027: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-201-2183
Socket Wrench Socket

142012183
0055680: RNCC: 3 | RNVC: 2
S.9/16L: RNCC: 5 | RNVC: 2
S9-16L: RNCC: 5 | RNVC: 2

1 Jan 1962

5120-14-292-8618

5120-14-426-7302
Rallonge En Tube

144267302
BO32BB7REP6-7-8: RNCC: 2 | RNVC: 2

17 Sep 1988

5120-14-370-9514
Outil Wrappeur

143709514
TL22-5: RNCC: 3 | RNVC: 2
SE225: RNCC: 5 | RNVC: 2

5 Jun 1981

5120-14-357-4332
Ring Retaining Pliers Tip Set

143574332
470.E1: RNCC: 3 | RNVC: 2
3148511778005: RNCC: 5 | RNVC: 2
470E1: RNCC: 5 | RNVC: 2
0177800: RNCC: 5 | RNVC: 9

7 Jun 1979

5120-14-503-8791
Cross Tip Screwdriver

145038791
303150: RNCC: 3 | RNVC: 2
0180573W00: RNCC: 5 | RNVC: 2

4 Feb 1998

5120-14-362-3052
Electrical Contact Remover

143623052
R282942: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-541-8991
Screwdriver Bit

145418991
61399227AA: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-228-7204
Open End Wrench

142287204
10EC06X8: RNCC: 3 | RNVC: 2
44EC6X8: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-379-6031
Hand Hydraulic Jack Kit

143796031
36545902300: RNCC: 3 | RNVC: 2
365459023: RNCC: 5 | RNVC: 9

1 Oct 1982

5120-14-431-7794
Spanner Wrench

144317794
0411-60142: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-286-7806
Screw Thread Insert Inserter

142867806
01500520000: RNCC: 3 | RNVC: 2
32072040: RNCC: 5 | RNVC: 2
32242040: RNCC: 5 | RNVC: 2
32082040: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-273-6805
Wire Twister Pliers

142736805
8810434000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-568-5772
Bearing And Bushing Inserter And Remover

145685772
F27314000: RNCC: 3 | RNVC: 2
F27314000: RNCC: 5 | RNVC: 2

21 Jun 2011

5120-14-544-6169
Handling Tool Arm

145446169
10719271: RNCC: 3 | RNVC: 2

14 Feb 2005

5120-14-551-0073
Spanner Wrench

145510073
F47158: RNCC: 3 | RNVC: 2

18 Aug 2006

5120-14-424-5560
Spanner Wrench

144245560
100270: RNCC: 3 | RNVC: 2
100270: RNCC: 5 | RNVC: 9

27 May 1988

5120-14-436-1036
Spanner Wrench

144361036
716442: RNCC: 3 | RNVC: 2

5 Dec 1989

5120-14-335-8084

5120-14-215-1901

5120-14-429-6611
Bearing And Bushing Inserter

144296611
007221080P: RNCC: 3 | RNVC: 2

8 Feb 1989

5120-14-321-3512
Spanner Wrench

143213512
8810546100: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-243-1567

5120-14-306-7986

5120-14-383-0609
Outillage Dextracti

143830609
F47185: RNCC: 3 | RNVC: 2

17 Mar 1983

5120-14-325-3445

5120-14-343-8359

5120-14-573-5695
Mechanical Puller

145735695
7M1052: RNCC: 3 | RNVC: 2

22 Oct 2012

5120-14-336-2535
Support Endoscope

143362535
9970-901-051: RNCC: 3 | RNVC: 2
85-800-3628: RNCC: 6 | RNVC: 9

24 Jul 1976

5120-14-539-3583
Socket Wrench Screwdriver Attachment

145393583
SV.12L: RNCC: 3 | RNVC: 2

7 Jan 2004

5120-14-278-4994
Outillage Embrayage

142784994
210813: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-425-6830
Mechanical Puller Attachment

144256830
8812871001: RNCC: 3 | RNVC: 2

21 Jul 1988

5120-14-318-6208
Spanner Wrench

143186208
C46313: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-435-6690
Spanner Wrench

144356690
59012594: RNCC: 3 | RNVC: 9

15 Nov 1989

5120-14-483-0615
Spanner Wrench

144830615
10441532: RNCC: 3 | RNVC: 2

8 Aug 1996

5120-14-402-2387
Levage Corps Outil

144022387
36168: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-227-2061

5120-14-346-5038
Cross Tip Screwdriver

143465038
HE586-6060: RNCC: 3 | RNVC: 2
T0URNEVPHILAMAN3: RNCC: 5 | RNVC: 9

12 Dec 1977

5120-14-338-4808
Mise En Forme Cone

143384808
S16-0606-0691: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-362-1780
Cimblot

143621780
C46285: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-214-1375
Mandrin

142141375
611-314-01: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-561-7752
Hand Material Handling Hook

145617752
12-070: RNCC: 3 | RNVC: 2
KOPALE: RNCC: 5 | RNVC: 1

4 Sep 2009

5120-14-212-2455
Cle Speciale Decrou

142122455
NO PRIMARY REF14-212-2455: RNCC: 3 | RNVC: 2
907406: RNCC: 5 | RNVC: 9

1 Jan 1964

5120-14-566-4657
Combination Box And Open End Wrench Set

145664657
A00-04374-000: RNCC: 3 | RNVC: 2

17 Nov 2010

5120-14-354-8997
Extrac Emmanc Outil

143548997
D47620: RNCC: 3 | RNVC: 2

20 Feb 1979

5120-14-031-6852

5120-14-308-5434
Mandrin

143085434
BL48816: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-340-9668

5120-14-249-9370

5120-14-376-2340

5120-14-572-5861
Retaining Ring Installation Tool

145725861
O112705: RNCC: 3 | RNVC: 2

16 Jul 2012

5120-14-301-5361

5120-14-226-3737

5120-14-225-5803

5120-14-256-0110
Cle Pour Carre Creu

142560110
200626: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-242-2055
Spanner Wrench

142422055
552-405MA083DET4: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-322-2394
Socket Wrench Adapter

143222394
C1-47029: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-453-7019
Preformed Packing Inserter And Remover

144537019
506020ET20-13R2: RNCC: 3 | RNVC: 2

5 Mar 1992

5120-14-490-6864
Drill

144906864
240 D 01490 000: RNCC: 3 | RNVC: 2
F300 0T 000 0968: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-281-8198
Wrench Kit

142818198
8811046000: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-479-8967
Flat Tip Screwdriver

144798967
456330: RNCC: 3 | RNVC: 2

13 Feb 1996

5120-14-531-6651
Six Point Tip Screwdriver

145316651
ACZX.9X75: RNCC: 3 | RNVC: 2
8038707W00: RNCC: 5 | RNVC: 2

11 Sep 2002

5120-14-399-9170
Capot De Charge Pri

143999170
F52180: RNCC: 3 | RNVC: 2

24 Apr 1985

5120-14-410-3874
Massette Cuivre

144103874
365-600: RNCC: 3 | RNVC: 2

18 Jun 1986

5120-14-322-1328

5120-14-526-8823
Socket Wrench Socket

145268823
10459833: RNCC: 3 | RNVC: 2

12 Sep 2001

5120-14-422-2303
Spanner Wrench

144222303
0471-202900: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-301-5368
Inserted Hammer Face

143015368
EA.40: RNCC: 3 | RNVC: 2
EA40: RNCC: 5 | RNVC: 2
3148510220406: RNCC: 5 | RNVC: 2
0022040: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-269-2268
Socket Wrench Adapter-Extension

142692268
T0229BBG3AREP1: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-488-9896
Hand Terminal Crimping Tool

144889896
575938: RNCC: 3 | RNVC: 2

18 Jun 1997

5120-14-325-4835
Spanner Wrench

143254835
12432J: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-204-9191
Piston Ring Expander

142049191
0948700710: RNCC: 3 | RNVC: 2
581T: RNCC: 3 | RNVC: 9
0948700710: RNCC: 5 | RNVC: 9
948700710: RNCC: 5 | RNVC: 9
MUL581T: RNCC: 5 | RNVC: 9

1 Jan 1963

5120-14-394-7264
Face Spanner Wrench Socket

143947264
YA003300: RNCC: 3 | RNVC: 2
YA0033: RNCC: 5 | RNVC: 2

28 Aug 1984

5120-14-521-6481
Screwdriver Handle

145216481
RL500: RNCC: 3 | RNVC: 2

30 Aug 2000

5120-14-445-3036
Hand Terminal Crimping Tool

144453036
PINCEUNILEC: RNCC: 3 | RNVC: 2
015870: RNCC: 5 | RNVC: 2
H467: RNCC: 5 | RNVC: 2
UNILEC: RNCC: 5 | RNVC: 2

8 Feb 1991

5120-14-247-2028
Spanner Wrench

142472028
1833T: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-329-8892
Electron Tube Extractor

143298892
426669: RNCC: 3 | RNVC: 2
GC1018: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-439-8455
Adjustable Wrench

144398455
39463131: RNCC: 3 | RNVC: 2

23 May 1990

5120-14-368-0376
Screwdriver Bit

143680376
EP.202: RNCC: 3 | RNVC: 2
0614 177 583: RNCC: 5 | RNVC: 2
3148510240824: RNCC: 5 | RNVC: 2
EPS2: RNCC: 5 | RNVC: 9
0024082: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-307-0693
Open End Wrench

143070693
97DES16CLE: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-264-9585
Spanner Wrench

142649585
0301-78: RNCC: 3 | RNVC: 2
RA301: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-521-7641
Socket Wrench Socket

145217641
F7042050: RNCC: 3 | RNVC: 2

13 Sep 2000

5120-14-432-7407
Screwdriver Bit

144327407
EBNA.204: RNCC: 3 | RNVC: 2
EBNA.204: RNCC: 5 | RNVC: 2
EBNA204: RNCC: 5 | RNVC: 2
3148510223148: RNCC: 5 | RNVC: 2
1059077X00: RNCC: 5 | RNVC: 2
0022314: RNCC: 5 | RNVC: 9

21 Jun 1989

5120-14-416-0353
Manual Impact Wrench

144160353
NM 300: RNCC: 3 | RNVC: 2
3148515101007: RNCC: 5 | RNVC: 2

3 Jun 1987

5120-14-526-3386
Cross Tip Screwdriver

145263386
958 240 001 001: RNCC: 3 | RNVC: 2

23 Jul 2001

5120-14-532-6592
Hydraulic Fitting Crimping Tool Head

145326592
DLT20PSHAS010: RNCC: 3 | RNVC: 2

27 Nov 2002

5120-14-406-9567
Mandrin Cent Calibr

144069567
56167: RNCC: 3 | RNVC: 2

22 Jan 1986

5120-14-387-1646
Controle Outillage

143871646
098004: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-225-0297

5120-14-338-1661
Socket Wrench Handle

143381661
K.140A: RNCC: 3 | RNVC: 2
3148510307459: RNCC: 5 | RNVC: 2
78C140: RNCC: 5 | RNVC: 2
0030745: RNCC: 5 | RNVC: 9
K140: RNCC: 5 | RNVC: 9
85-681-3240: RNCC: 6 | RNVC: 9

6 Nov 1976

5120-14-524-8399
Screwdriver Bit

145248399
ETS.103: RNCC: 3 | RNVC: 2
1/LTT 237 23: RNCC: 5 | RNVC: 1
11056: RNCC: 5 | RNVC: 2
3148510256320: RNCC: 5 | RNVC: 2
1059114W00: RNCC: 5 | RNVC: 2

20 Apr 2001

5120-14-470-2958
Screwdriver Bit

144702958
EX.610: RNCC: 3 | RNVC: 2
3148510258607: RNCC: 5 | RNVC: 2
1080348L00: RNCC: 5 | RNVC: 2
91782993: RNCC: 5 | RNVC: 2
236-0950: RNCC: 5 | RNVC: 2
0614 331 0: RNCC: 5 | RNVC: 2
0025860: RNCC: 5 | RNVC: 9
FACOMEX.610: RNCC: 5 | RNVC: 9

15 Jun 1994

5120-14-366-2043
Remontage Outillage

143662043
96-21-21-192-00: RNCC: 3 | RNVC: 2
85-100-5012: RNCC: 6 | RNVC: 9

4 Nov 1980

5120-14-416-7523
Plaque D'appui

144167523
537290: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-330-2392

5120-14-556-9813
Woven Cable Grip

145569813
78000225: RNCC: 3 | RNVC: 2

25 Apr 2008

5120-14-444-7615
Cle De Reglage

144447615
0478-200300: RNCC: 3 | RNVC: 2

21 Jan 1991

5120-14-299-7356

5120-14-265-4739

5120-14-241-6072
Mandrin De Preserti

142416072
FF8X10C: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-315-9965

5120-14-477-9424
Socket Wrench Extension

144779424
M418610A9290A01: RNCC: 3 | RNVC: 2

4 Oct 1995

5120-14-278-4885
Spanner Wrench

142784885
HE60X16: RNCC: 3 | RNVC: 2
531453: RNCC: 5 | RNVC: 2
HE60X16: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-254-4927
Blacksmith's Vise

142544927
80503: RNCC: 3 | RNVC: 2
SAM80503: RNCC: 5 | RNVC: 9

1 Jan 1969

5120-14-540-5194
Open End Wrench

145405194
10557664: RNCC: 3 | RNVC: 2

1 Apr 2004

5120-14-384-6310
Electrical Card Extractor

143846310
16928962: RNCC: 3 | RNVC: 2
16928962: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-486-2847
Spanner Wrench

144862847
F117204: RNCC: 3 | RNVC: 2

10 Mar 1997

5120-14-254-4973
Screwdriver Bit

142544973
LAME16MM: RNCC: 3 | RNVC: 9

1 Jan 1969

5120-14-530-6173
Detent Handling Tool

145306173
132463: RNCC: 3 | RNVC: 2

26 Jun 2002

5120-14-272-4468
Open End Wrench

142724468
DNAR546: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-392-0883

5120-14-550-4531
Cable Tie Installation Tool

145504531
01870200000: RNCC: 3 | RNVC: 2
AA009570: RNCC: 6 | RNVC: 9

21 Jun 2006

5120-14-303-2715

5120-14-280-3275
Rodoir

142803275
65MA403961: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-565-1237
Mechanical Puller

145651237
885502: RNCC: 3 | RNVC: 2

13 Jul 2010

5120-14-364-7900
Retaining Ring Installation Tool

143647900
16849268: RNCC: 3 | RNVC: 2
16849268: RNCC: 5 | RNVC: 9

2 Sep 1980

5120-14-226-0321

5120-14-287-8759

5120-14-386-1536
Bearing And Bushing Inserter

143861536
6801J31-1039-00: RNCC: 3 | RNVC: 2

24 Aug 1983

5120-14-540-3101
Detent Handling Tool

145403101
10599106: RNCC: 3 | RNVC: 2

18 Mar 2004

5120-14-291-8157
Socket Wrench Socket

142918157
NS.21: RNCC: 3 | RNVC: 2
3148510421308: RNCC: 5 | RNVC: 2
NS21: RNCC: 5 | RNVC: 2
0714 13 091: RNCC: 5 | RNVC: 2
0714 13 21: RNCC: 5 | RNVC: 2
0042130: RNCC: 5 | RNVC: 9

1 Jan 1972

5120-14-429-1551
Bearing And Bushing Remover

144291551
530565: RNCC: 3 | RNVC: 2

11 Jan 1989

5120-14-214-9915
Extracteur Special

142149915
204802: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-376-2345

5120-14-214-3143

5120-14-420-8128
Appui Cloche

144208128
003242004: RNCC: 3 | RNVC: 9
3242004: RNCC: 3 | RNVC: 9
PTU3940: RNCC: 5 | RNVC: 9

16 Dec 1987

5120-14-352-2708

5120-14-320-0103
Introducteur Bande

143200103
3CGF180: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-347-0226
Faux Mors

143470226
C47757: RNCC: 3 | RNVC: 2

19 Jan 1978

5120-14-319-7258
Verif Dentu Molette

143197258
NO PRIMARY REF14-319-7258: RNCC: 3 | RNVC: 2
42-903-04-046: RNCC: 5 | RNVC: 9

21 Feb 1996

5120-14-204-4430
Cle Multiple

142044430
80900-180: RNCC: 3 | RNVC: 2
78576-91: RNCC: 5 | RNVC: 2

1 Jan 1963

5120-14-449-1600
Spanner Wrench

144491600
Y075-073-000A: RNCC: 3 | RNVC: 2
85-694-7126: RNCC: 6 | RNVC: 9

31 Jul 1991

5120-14-342-5319

5120-14-362-1758
Faux Mors

143621758
C46321: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-225-0173
Cle Carree Speciale

142250173
0335930: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-380-3902
Hand Powered Poppet Valve Lapper

143803902
A4H11797: RNCC: 3 | RNVC: 2
0190074X00: RNCC: 5 | RNVC: 2
85-692-1141: RNCC: 6 | RNVC: 9

8 Nov 1982

5120-14-217-2784
Cle Speciale

142172784
M20-006: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-343-9851
Socket Wrench Handle

143439851
9970-111-190: RNCC: 3 | RNVC: 2
85-689-5597: RNCC: 6 | RNVC: 9

13 Jul 1977

5120-14-488-3132
Socket Head Screw Key Set

144883132
83H.JU10: RNCC: 3 | RNVC: 2
83HJU10: RNCC: 5 | RNVC: 2
0532861: RNCC: 5 | RNVC: 2
3148515328619: RNCC: 5 | RNVC: 2

30 Apr 1997

5120-14-489-0308
Socket Head Screw Key

144890308
89.27L: RNCC: 3 | RNVC: 2
3148511268780: RNCC: 5 | RNVC: 2
0126878: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-462-3763
Spanner Wrench

144623763
BLC23075: RNCC: 3 | RNVC: 2

15 Apr 1993

5120-14-032-0130
Mechanical Puller Attachment

140320130
8812251001: RNCC: 3 | RNVC: 2

5 Jul 1980

5120-14-417-8374
Bearing And Bushing Inserter And Remover

144178374
523181: RNCC: 3 | RNVC: 2

29 Jul 1987

5120-14-538-8540
Solid Center Punch

145388540
NGM0021020400830: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-459-1630
Bearing And Bushing Remover

144591630
45215107: RNCC: 3 | RNVC: 2
45215107: RNCC: 5 | RNVC: 9

19 Nov 1992

5120-14-424-5259
Spanner Wrench

144245259
7M475: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-480-1780
Open End Wrench

144801780
46020778: RNCC: 3 | RNVC: 2

26 Feb 1996

5120-14-340-8513

5120-14-441-9262
Mechanical Puller Step Plate

144419262
1431: RNCC: 3 | RNVC: 2
50002611431: RNCC: 5 | RNVC: 2

26 Sep 1990

5120-14-546-4040
Socket Wrench Socket

145464040
0714 13 17: RNCC: 3 | RNVC: 2

30 Jun 2005

5120-14-387-8636
Axe Extracteur

143878636
OU50381: RNCC: 3 | RNVC: 2
50381: RNCC: 3 | RNVC: 2
0U50381: RNCC: 5 | RNVC: 2
50381: RNCC: 5 | RNVC: 9

12 Oct 1983

5120-14-226-3133

5120-14-381-2798
Douille Mandrin

143812798
4029: RNCC: 3 | RNVC: 2
5000264029: RNCC: 5 | RNVC: 2
5000264029: RNCC: 5 | RNVC: 9

25 Jan 1983

5120-14-491-1982
Tournevis

144911982
111012255: RNCC: 3 | RNVC: 2
F300 0T 001 8503: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-409-7484
Open End Box Wrench Set

144097484
104-TR10H: RNCC: 3 | RNVC: 2
104TR10H: RNCC: 3 | RNVC: 2
3272670237483: RNCC: 5 | RNVC: 2

28 May 1986

5120-14-234-6474

5120-14-200-3339

5120-14-573-5792
Socket Wrench

145735792
92A.15: RNCC: 3 | RNVC: 2

23 Oct 2012

5120-14-526-3160
Rechanges Coussins

145263160
40899: RNCC: 3 | RNVC: 2

18 Jul 2001

5120-14-368-4650

5120-14-425-9270
Pose Bill Outillage

144259270
600156: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-576-2931
Inserter And Remove

145762931
8811315003: RNCC: 3 | RNVC: 2

11 Jun 2013

5120-14-285-5945

5120-14-306-6125
Open End Wrench

143066125
NO PRIMARY REF14-306-6125: RNCC: 3 | RNVC: 2
24400-13: RNCC: 5 | RNVC: 9
24400-13: RNCC: 5 | RNVC: 9
85-800-2340: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-444-3191
Combination Box And Open End Box Wrench

144443191
GS130-04: RNCC: 3 | RNVC: 2

7 Jan 1991

5120-14-301-0974
Bearing Staking Installation Tool

143010974
330A98-3351-00: RNCC: 3 | RNVC: 2

1 Jan 1973

5120-14-356-5999
Spanner Wrench

143565999
D47423: RNCC: 3 | RNVC: 2
85-691-1312: RNCC: 6 | RNVC: 9

15 May 1979

5120-14-275-1684
Poussoir

142751684
3CGF82: RNCC: 3 | RNVC: 2
3CGF82: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-320-0116
Cle De Manoeuvre

143200116
3CGF75: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-282-8137

5120-14-274-8665

5120-14-393-0295
Open End Wrench

143930295
44-12X13CP: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-225-3194

5120-14-573-4568
Mechanical Puller

145734568
9622DT915: RNCC: 3 | RNVC: 2

15 Oct 2012

5120-14-456-3060
Mandrin Pour Connec

144563060
11166: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-574-8195
Regulator Spring Adjusting Tool

145748195
43.026.101: RNCC: 3 | RNVC: 2
43026101: RNCC: 5 | RNVC: 2

19 Feb 2013

5120-14-539-8817
Tire-Point

145398817
LTCA08A: RNCC: 3 | RNVC: 2

17 Feb 2004

5120-14-228-5631

5120-14-233-6930

5120-14-576-1243
Flat Tip Screwdriver

145761243
A3X100VE: RNCC: 3 | RNVC: 2
775691: RNCC: 5 | RNVC: 2
3148517756915: RNCC: 5 | RNVC: 2

30 May 2013

5120-14-374-2070

5120-14-380-8394
Faux Mors

143808394
PR47626: RNCC: 3 | RNVC: 2

14 Dec 1982

5120-14-373-9581
Cle De Secours

143739581
12.17.47: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-391-8411
Douille Extracteur

143918411
TMY20-32-354: RNCC: 3 | RNVC: 2

21 Mar 1984

Load More Results