What is Federal Supply Class 5120?

FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

What is NATO Supply Classification Class 5120?

NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.

Which Federal Supply Group is FSC 5120 in?

FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.

Which NATO Supply Classification Group is NSC 5120 in?

NSC 5120is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

What is a Blacksmith's Anvil?

A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.

A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.

A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.

What is a Hand Hydraulic Jack?

A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.

What is a Socket Wrench Adapter?

A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.

What is a Flat Tip Screwdriver?

A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.

What is a Machinist's Scriber?

A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.

What is a Hand Tube Flaring Tool?

A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.

What is a Blacksmith's Punch?

A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.

What is a Drain Plug Wrench?

A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.

What is a Quick Adjusting Screw Clamp?

A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.

What is a Ratchet Screwdriver?

A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.

What is a Spanner Wrench?

A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.

What is a Pipe Wrench?

A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.

What is a Socket Wrench Handle?

A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.

What is a Screw Extractor?

A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.

What is a Screwdriver Bit?

A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.

What is a Mechanical Finger?

A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.

What is a Socket Wrench Socket?

A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.

What is a Socket Head Screw Key?

A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.

What is a Socket Wrench?

A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.

What is a Jaw Cable Grip?

A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.

What is a Face Spanner Wrench Socket?

A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.

What is a Hand Tube Bender?

A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.

What is a Box Wrench?

A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.

A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.

A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.

A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.

What is a Wrecking Bar?

A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.

What is a Drive Pin Punch?

A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.

A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).

A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.

A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.

What is a Hole Sheet Metal Holder?

A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.

What is a Screwdriver And Wrench Assembly?

A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.

What is a Hand Rivet Set?

A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.

What is a Stakeholder Bench Plate?

A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.

What is a Drill Drift?

A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.

A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.

What is a Socket Wrench Handle Bar?

A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.

What is a Hand Shovel?

A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).

What is a Vise Jaw Caps?

A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.

What is a Blacksmiths' Tongs?

A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.

What is a Digging Bar?

A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.

What is a Piston Ring Compressor?

A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.

What is a Valve Spring Lifter?

A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.

What is a Fuse Puller?

A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.

Hand Tools, Nonedged, Nonpowered - France (FR)

Federal Supply Class (FSC): 5120

NATO Supply Classification Class (NSC): 5120

Federal Supply Group (FSG): 51 Hand Tools

NATO Supply Classification Group (NSG): 51 Hand Tools

Items Managed by France (FR) - NCB is 14

Page 63 of 110

NSN Format for Hand Tools, Nonedged, Nonpowered
Codified by France

51	20	14	XXX
Group FSG	Class	NCB	Identifier
FSC Federal Supply Class		NIIN
NSN

NATO Supply Class 5120 is a classification within NATO Supply Group 51, which is dedicated to Hand Tools. Specifically, NATO Supply Class 5120 refers to Hand Tools that are Nonedged and Nonpowered.

Nonedged hand tools are tools that do not have a sharp cutting edge. Examples of nonedged hand tools include hammers, wrenches, screwdrivers, pliers, and chisels. These tools are typically used for gripping, twisting, turning, or striking objects.

Nonpowered hand tools, as the name suggests, are tools that do not require any external power source to operate. They are manually operated and rely on the physical force applied by the user. This distinguishes them from powered hand tools, which require electricity, batteries, or other power sources to function.

NATO Supply Class 5120 encompasses a wide range of nonedged, nonpowered hand tools that are used for various purposes in military operations, maintenance, construction, and other related activities. These tools are essential for tasks such as repairs, assembly, disassembly, and general maintenance work.

When procuring hand tools within NATO Supply Class 5120, it is important to ensure that they meet the required specifications and standards set by NATO. This ensures compatibility, interoperability, and quality assurance across NATO member countries.

Overall, NATO Supply Class 5120 plays a crucial role in categorizing and organizing nonedged, nonpowered hand tools within NATO Supply Group 51, making it easier for military organizations to identify and acquire the necessary tools for their operations.

FSC 5120 Hand Tools, Nonedged, Nonpowered - France (FR)

Includes Hammers; Picks; Pliers, except pliers for cutting only; Screwdrivers; Shovels; Construction Rakes, Forks and Hoes; Jacks, including Contractors' Jacks; Wrecking Bars; Glue Pots; Blowtorches.

Excludes Craftsman's Measuring Tools; Gardening Rakes, Forks, Hoes, and other Garden Tools.

Frequently Asked Questions(FAQ) for Federal Supply Class 5120

What is Federal Supply Class 5120?: FSC 5120 is the Federal Supply Class (formally known as NATO Supply Classification Class NSC 5120) in the USA for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
What is NATO Supply Classification Class 5120?: NSC 5120 is the NATO Supply Classification Class (also known as Federal Supply Class FSC 5120 in the USA) for supply items codified in the category of Hand Tools, Nonedged, Nonpowered.
Which Federal Supply Group is FSC 5120 in?: FSC 5120 is in Federal Supply Group (FSG) 51 which contains Hand Tools.
Which NATO Supply Classification Group is NSC 5120 in?: NSC 5120 is in NATO Supply Classification Group (NSG) 51 which contains Hand Tools.

Supply Items Included in Federal Supply Class 5120

What is a Blacksmith's Anvil? 16 Items: A Blacksmith's Anvil (ANVIL,BLACKSMITH'S) is a tool used by blacksmith's primarily for forging and shaping metals into various shapes and sizes. It is made of single piece cast steel, drop forged steel, or may have a cast-iron body with a steel face and horn or horns or the like.
What is a Pipe Vise? 19 Items: A Pipe Vise (VISE,PIPE) is a clamping device which may be any one of various designs, such as a base and two or more V-shaped jaws, a base and one V-shaped jaw and chain, or a base and strap. Actuated by screw or cam with clamping force applied on a plane vertical to the base. Designed to be bolt or clamp mounted to a bench, table or the like or may have facilities for mounting to a post or other vertical object.
What is a Hand Vise? 25 Items: A Hand Vise (VISE,HAND) is a clamping device having two jaws and provided with a handle for holding in the hand. May be furnished with a separate clamp for attaching the vise to a bench, table or the like. Excludes VISE, PIN; VISE, WIRE ROPE SPLICING; WRENCH, PLIER and CLAMP, PLIER.
What is a Hand Hydraulic Jack? 133 Items: A Hand Hydraulic Jack (JACK,HYDRAULIC,HAND) is a device consisting of a ram, hydraulically actuated by a hand-operated pump(s). The units may be combined on a single base, in a common body or be of the remote control type. The ram is actuated by a hydraulic force in one direction only. Excludes JACK, BUMPER; dolly type jacks; folding tripod type jacks and items with reversing valve mechanisms for performing pulling actions by changing the direction of the hydraulic force applied to the ram.
What is a Socket Wrench Adapter? 153 Items: A Socket Wrench Adapter (ADAPTER,SOCKET WRENCH) is a rigid adapter less than four inches (101.6 mm) long used to connect sockets to handles, power tools, or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; and ADAPTER-EXTENSION, SOCKET WRENCH; Excludes ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; SOCKET, WRENCH, REFRIGERATION VALVE STEM; and HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Flat Tip Screwdriver? 903 Items: A Flat Tip Screwdriver (SCREWDRIVER,FLAT TIP) is a manual screwdriver having a single, nonremovable, flat tip blade. The blade has a flared or straight sided tip. For items having more than one blade, see SCREWDRIVER BIT SET AND HANDLE. Excludes SCREWDRIVER, JEWELER'S SWIVEL KNOB; SCREWDRIVER, RATCHET; and SCREWDRIVER, SPARK TESTING.
What is a Machinist's Scriber? 17 Items: A Machinist's Scriber (SCRIBER,MACHINIST'S) is a sharp pointed metal hand tool having one or more steel points which may be fixed, removable or reversible. It is used for marking lines on steel and other hard materials. Excludes SCRIBER, DIAMOND POINT.
Swage,Bottom,Blacksmith's 10 Items
What is a Hand Tube Flaring Tool? 23 Items: A Hand Tube Flaring Tool (FLARING TOOL,TUBE,HAND) is a noncutting tool having a male forming die and a tube gripping or clamping device. It is designed to produce a single flare or double lap flare, of a specific size and angle to fit a tube fitting, on the end(s) of metallic tubing. Excludes PUNCH, TUBE FLARING, HAND. See also PUNCH, TUBE BELLING, HAND.
What is a Blacksmith's Punch? 12 Items: A Blacksmith's Punch (PUNCH,BLACKSMITH'S) is a hand tool designed to drift or pierce holes in hot metal. It is hammerlike in appearance and may be fitted with a wooden handle. In use it is held by a handle and struck a hammerlike blow. See also PUNCH, BACKING OUT and PUNCH, TRACK.
What is a Drain Plug Wrench? 45 Items: A Drain Plug Wrench (WRENCH,DRAIN PLUG) is a wrench specifically designed for removing and replacing drain plugs installed in engine bases, transmission housings, transfer cases, fuel tanks, shock absorbers, differential housings, pontoons, and the like. See also WRENCH, BUNG.
What is a Quick Adjusting Screw Clamp? 57 Items: A Quick Adjusting Screw Clamp (CLAMP,SCREW,QUICK ADJUSTING) is a clamping device consisting of a steel bar having a fixed or sliding head and a fixed or sliding jaw. The tightening device consists of a thumbscrew, crank-handle screw or a T-handle screw.
What is a Ratchet Screwdriver? 16 Items: A Ratchet Screwdriver (SCREWDRIVER,RATCHET) is a manual screwdriver having single or multiple blades and a ratcheting mechanism located between the handle and blade. The blade(s) may have various types of tips.
What is a Spanner Wrench? 3829 Items: A Spanner Wrench (WRENCH,SPANNER) is a tool on which are located one or more pins, lugs, holes, keyways, or hooks, designed to engage matching holes, slots, or projections on a coupling, nut, or the like; for exerting a torsional force, concentrated at a point or points of a mating part, tending to turn the mating part about an axis. The drive end may have a hole for a separate straight bar used as a handle. Excludes WRENCH, BUNG.
Flatter,Blacksmith's 18 Items
Swage,Top,Blacksmith's 12 Items
What is a Pipe Wrench? 110 Items: A Pipe Wrench (WRENCH,PIPE) is a wrench having serrated jaws, chain, girth, or strap at one end. It is designed for installing or removing pipe or pipe fittings. Excludes WRENCH, PIPE, INTERNAL GRIPPING.
What is a Socket Wrench Handle? 149 Items: A Socket Wrench Handle (HANDLE,SOCKET WRENCH) is an item having a square external end and designed to fit into the internal end of a wrench socket or attachment and to which force is applied to drive the socket. Excludes torque indicating and other torque controlled items. See also WRENCH, RATCHET.
What is a Screw Extractor? 53 Items: A Screw Extractor (EXTRACTOR,SCREW) is a hand tool used for removing threaded ends of broken screws, studs, bolts, pipe fittings and pipe which do not protrude sufficiently to remove them by gripping externally. Excludes square tang straight type, straight fluted items rated to extract pipe items only, and EXTRACTOR, TAP.
Screwdriver,Offset 54 Items
What is a Screwdriver Bit? 707 Items: A Screwdriver Bit (BIT,SCREWDRIVER) is an item designed for use with a HOLDER, SCREWDRIVER BIT (as modified), part of a BIT SET, SCREWDRIVER, or a replacement part for a SOCKET WRENCH ATTACHMENT, SCREWDRIVER. It has a screwdriving tip at one or both ends. See also, SOCKET WRENCH ATTACHMENT, SCREWDRIVER.
What is a Mechanical Finger? 25 Items: A Mechanical Finger (FINGER,MECHANICAL) is a hand-operated, spring retracting jaw device used to pick up and/or hold small articles in confined spaces. It may be rigid or flexible. Excludes RETRIEVING TOOL, MAGNETIC.
What is a Socket Wrench Socket? 1803 Items: A Socket Wrench Socket (SOCKET,SOCKET WRENCH) is an item having an internal drive at one end made to fit into the external drive end of a socket wrench handle, torque wrench, or power driven tool. The opposite end consists of various internal wrench shapes such as hexagon or square. It may include an integral universal joint.
What is a Socket Head Screw Key? 1412 Items: A Socket Head Screw Key (KEY,SOCKET HEAD SCREW) is a hand tool designed to impart a rotary movement of force for installing or removing socket screw products. Excludes WRENCH, DRAIN PLUG; and WRENCH, BUNG.
What is a Socket Wrench? 1641 Items: A Socket Wrench (WRENCH,SOCKET) is a wrench consisting of one or more sockets, integral with shank(s) or body. It may not be furnished with a handle when the handle is removable or when it is the "double end socket" and "single socket bar" types, each designed for use with the other or similar items. Excludes SOCKET, SOCKET WRENCH.
What is a Jaw Cable Grip? 52 Items: A Jaw Cable Grip (GRIP,CABLE,JAW) is a device designed to clutch bare and insulated solid and hollow wires and conductors, wire rope, cable and the like for holding taut or pulling same. Excludes GRIP, CABLE, WOVEN.
What is a Face Spanner Wrench Socket? 565 Items: A Face Spanner Wrench Socket (SOCKET,WRENCH,FACE SPANNER) is an item designed to be driven by an external or internal drive. It has a face type spanner end.
Jack,Push-Pull,Screw 30 Items
What is a Hand Tube Bender? 54 Items: A Hand Tube Bender (BENDER,TUBE,HAND) is a hand-operated tool for use in precision and nonprecision cold bending of round metal tubing used in hydraulic, fuel, oil and refrigeration lines and the like. See also BENDER, ELECTRICAL CONDUIT, HAND. Excludes benders for pipe, conduit, heavy steel tube and BENDING MACHINE, PIPE AND CONDUIT.
What is a Box Wrench? 1106 Items: A Box Wrench (WRENCH,BOX) is a nonadjustable wrench having a box wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a C Clamp? 55 Items: A C Clamp (CLAMP,C) is a clamping device in the shape of the letter C having a screw with or without a swivel button at the contact end, and a thumbscrew, T-handle, or square-end drive. Excludes CLAMP, LOOP.
What is a Pinch Bar? 19 Items: A Pinch Bar (BAR,PINCH) is a hand tool used by laborers and mechanics made of either ferrous or nonferrous materials. May be 6 or 8 sided and edges and corners shall be clearly defined and smoothly finished. The work end shall have a chisel ie round taper point.
What is a Pry Bar? 17 Items: A Pry Bar (BAR,PRY) is before using, refer to Reference Drawing Group AG.
What is a Wrecking Bar? 15 Items: A Wrecking Bar (BAR,WRECKING) is before using, refer to Reference Drawing Group AG.
What is a Drive Pin Punch? 273 Items: A Drive Pin Punch (PUNCH,DRIVE PIN) is iNC 03851 REINSTATED ON 030405~A round, square, hexagonal or octagonal bodied hand tool, having a flat blunt face. Includes tapered items whose taper length is less than 4 inches (101.6 mm). The tapered items are normally used to start out, pins, bolts, and the like from holes having a force or drive fit, and the straight items to follow thru or finish driving out. For tapered items having a taper length of 4 inches (101.6 mm) or more, see PUNCH, DRIFT and PUNCH, ALIGNING. See also NAIL SET.
What is a Pliers? 413 Items: A Pliers is refer to Reference Drawing Group A. See also PLIERS (as modified).
What is a Spatula? 32 Items: A Spatula is a knife-like item having a rounded end. It is used as a hand implement for spreading and/or mixing such items as ink, paint, frosting, and/or cleaning mixing bowls in a kitchen or a bakery and the like. Do not use if a more speciific name exists, such as SPATULA, BRAIN; SPATULA, EYE; and SPATULA,DENTAL.
What is a Driftpin? 295 Items: A Driftpin is a round, smooth, metal hand tool tapered at one or both ends and used in assembly and construction work to align holes preparatory to fastening parts. The single taper style may be tapered its entire length. See also PIN, TAPERED, PLAIN and PUNCH, ALIGNING.
Face,Hammer,Inserted 25 Items
What is a Hole Sheet Metal Holder? 37 Items: A Hole Sheet Metal Holder (HOLDER,SHEET METAL,HOLE) is a device specifically designed for inserting in holes previously drilled through two or more sheet metal parts in order to position, align and/or hold the parts together.
What is a Screwdriver And Wrench Assembly? 11 Items: A Screwdriver And Wrench Assembly is an assembly consisting of a screwdriver inside a wrench. Each may be turned independently of the other. Excludes ADJUSTING TOOL, VALVE TAPPET.
What is a Hand Rivet Set? 121 Items: A Hand Rivet Set (RIVET SET,HAND) is a hand tool less than eight (8) inches (203.2 mm) long which, when repeatedly struck by a hammer, forms a head or flare on the shank end of a rivet. See also BAR, BUCKING, RIVET.
What is a Stakeholder Bench Plate? 22 Items: A Stakeholder Bench Plate (PLATE,BENCH,STAKEHOLDER) is a cast-iron or steel plate, machined on one side, of either the fixed or revolving type, containing round and tapered square holes to fit the shanks of various staking tools. It is used by sheet metal workers.
What is a Drill Drift? 32 Items: A Drill Drift (DRIFT,DRILL) is a wedge shaped flat tool angled on one side to a horizontal side forming a blunt end. It is used to loosen a drill or drill socket from a receiving member by tapping it with a hammer or by spring release.
What is a Tack Claw? 15 Items: A Tack Claw (CLAW,TACK) is a hand tool consisting of a steel shank having a nail or tack lifting claw formed on one end and a wood handle fixed to the opposite end.
Mattock 28 Items
What is a Socket Wrench Handle Bar? 108 Items: A Socket Wrench Handle Bar (BAR,SOCKET WRENCH HANDLE) is a hand tool designed to fit through the hole in the body of a socket wrench to provide leverage. It may include a means of preventing the socket wrench from sliding off. Excludes HANDLE, SOCKET WRENCH; and EXTENION, SOCKET WRENCH.
Stake,Sheet Metalworking 50 Items
Riveter,Blind,Hand 76 Items
What is a Hand Shovel? 43 Items: A Hand Shovel (SHOVEL,HAND) is a tool with a broad, deep scoop or blade and a handle used primarily for digging or handling loose and bulky materials such as earth, sand, gravel, snow and the like. Excludes FIRE SHOVEL HAND and INTRENCHING TOOL, HAND. See also SPADE AND SPOON (as modified).
What is a Vise Jaw Caps? 98 Items: A Vise Jaw Caps (CAPS,VISE JAW) is a pair of items, one of which is placed over each jaw of a vise to protect the finish of the work to be held therein.
What is a Blacksmiths' Tongs? 30 Items: A Blacksmiths' Tongs (TONGS,BLACKSMITHS') is excludes foundry tongs and TONGS, SHEET METAL WORKERS'.
What is a Digging Bar? 20 Items: A Digging Bar (BAR,DIGGING) is a tool used for earth digging. A digging bar has a formed bit at one end. This bit is smoothly finished, and has a uniformly tapered cutting edge ground to a double-beveled edge. The opposite end of the bar will terminate in a round uniform tapered point.
Block,Dolly,Sheet Metalworking 56 Items
What is a Piston Ring Compressor? 34 Items: A Piston Ring Compressor (COMPRESSOR,PISTON RING) is a hand held, hand operated device designed to compress one or more piston rings into piston grooves for installation into a cylinder.
What is a Valve Spring Lifter? 29 Items: A Valve Spring Lifter (LIFTER,VALVE SPRING) is a hand tool designed to compress valve springs on engines by lifting up (pushing down) only one end of the valve spring. See also COMPRESSOR, VALVE SPRING.
What is a Fuse Puller? 20 Items: A Fuse Puller (PULLER,FUSE) is a hand tool of various shapes designed for removing and/or inserting a FUSE (as modified). It does not include a test light.
What is a Hand Lead Seal Press? 18 Items: A Hand Lead Seal Press (PRESS,LEAD SEAL,HAND) is a plierlike tool having fixed or removable dies which may be engraved with any legend, designed primarily for compressing or crimping lead seals over the ends of wire or metal bands to provide security against tampering.
What is a Hand Beading Tool? 91 Items: A Hand Beading Tool (BEADING TOOL,HAND) is a noncutting, Y-shaped tool primarily designed for beading the ends of boiler tubes, evaporator tubes, and the like.
What is a Hand Hammer? 502 Items: A Hand Hammer (HAMMER,HAND) is a tool with a striking face on one or both ends of a metallic weighted head fixed crosswise to a handle. It is used to strike and/or drive objects, or beat malleable materials. For items stocked without FACE, HAMMER, INSERTED, see HOLDER, INSERTED HAMMER FACE. Excludes DRIVER, COOPER'S and mechanical hammers. See also MALLET (as modified).
Head,Hand Hammer 81 Items
What is a Lamp Extractor? 76 Items: A Lamp Extractor (EXTRACTOR,LAMP) is a hand tool designed to facilitate the removal of incandescent lamps. It may also be used for installing lamps.
What is a Tube Packing Ring Installing Tool? 29 Items: A Tube Packing Ring Installing Tool (INSTALLING TOOL,TUBE PACKING RING) is an item designed to insert packing rings on tubes within tube sheets on condensers and similar heat exchangers. In operation, the packing rings are assembled on the loading pin mandrel and are then transferred from the mandrel on to the tube by means of a tubular sleeve which slides on the mandrel.
What is a Carpenters' Pincers? 18 Items: A Carpenters' Pincers (PINCERS,CARPENTERS') is a plierlike hand tool having two opposing jaws which may have hammerlike backs. One handle has a nail or tack pulling claw, the other is shaped to form a screwdriver. The tool may contain a wire cutter. See also NIPPERS, END CUTTING and PINCERS, FARRIERS'.
What is a Trowel? 33 Items: A Trowel is a tool used for bricklaying, concrete work, plastering, linoleum laying, and masonry work. Excludes CORNER TOOL, CONCRETE.
What is a Hand Abrasive Wheel Dresser? 12 Items: A Hand Abrasive Wheel Dresser (DRESSER,ABRASIVE WHEEL,HAND) is a tool designed to remove glaze from, dress, shape, sharpen, and true solid abrasive wheels. Excludes NIB, DIAMOND, WHEEL DRESSING.
What is a Lamp Cap Extractor? 32 Items: A Lamp Cap Extractor (EXTRACTOR,LAMP CAP) is a tool specifically designed to facilitate the removal of lamp caps from switchboards, panels or indicator lamps.
What is a Rivet Bucking Bar? 51 Items: A Rivet Bucking Bar (BAR,BUCKING,RIVET) is a hand tool which may be held against the unfinished shank or the head of a rivet. It jams a head on the rivet when force is applied to either the finished head or unfinished shank of the rivet. See Reference Drawing Group BB before using. See RIVET SET, HAND.
What is a Craftsman's Tweezers? 86 Items: A Craftsman's Tweezers (TWEEZERS,CRAFTSMAN'S) is a hand tool used by jewelers, opticians, and the like. It is designed to produce a gripping action by the spring tension type blades. Excludes FORCEPS (as modified) and TWEEZERS, HAIR.
What is a Hand Terminal Crimping Tool? 277 Items: A Hand Terminal Crimping Tool (CRIMPING TOOL,TERMINAL,HAND) is a hand held tool designed to install various types of terminals on electrical conductors. See also COMPRESSING TOOL, SPLICING SLEEVE.
What is a Woven Cable Grip? 23 Items: A Woven Cable Grip (GRIP,CABLE,WOVEN) is a braided wire device designed to clutch a bare or insulated conductor, cable or wire rope, for holding taut or drawing through conduit.
What is a Screw Thread Insert Extractor? 19 Items: A Screw Thread Insert Extractor (EXTRACTOR,SCREW THREAD INSERT) is a tee handled tool with wedge shaped drive used to remove screw thread inserts.
What is an Electron Tube Extractor? 18 Items: An Electron Tube Extractor (EXTRACTOR,ELECTRON TUBE) is a hand tool designed to facilitate the removal of electron tubes from electronic equipment and to avoid burning the fingers. It may be used for installing tubes.
What is a Cross Tip Screwdriver? 362 Items: A Cross Tip Screwdriver (SCREWDRIVER,CROSS TIP) is a manual screwdriver having a single, non-removable, cross tip blade. The blade shall be round in cross section.
What is a Swivel Knob Jeweler's Screwdriver? 21 Items: A Swivel Knob Jeweler's Screwdriver (SCREWDRIVER,JEWELER'S,SWIVEL KNOB) is a manual screwdriver with a swivel knob. The cylindrical body is fluted or knurled for positive gripping. Excludes SCREWDRIVER AND HOLDER, WATCH BALANCE SCREW.
What is a Hand Screw Starter? 11 Items: A Hand Screw Starter (SCREW STARTER,HAND) is a hand tool for starting slotted and/or cross recess head screws. It grips the screw slot and/or cross recess by means of spring bits, sliding wedges or rotating wedge.
What is an Electronic Equipment Alignment Tool? 37 Items: An Electronic Equipment Alignment Tool (ALIGNMENT TOOL,ELECTRONIC EQUIPMENT) is an item designed for adjustment of electronic circuits, and which is insulated to reduce to a minimum the change in radio frequency inductance or capacitance in the circuit(s) under adjustment. Excludes screwdrivers and wrenches having a more specific item name.
What is a Tool Handle Wedge? 10 Items: A Tool Handle Wedge (WEDGE,TOOL HANDLE) is excludes WEDGE, WOOD.
What is a Marlinespike? 16 Items: A Marlinespike is a metal hand tool made in the shape of a tapered pin. One end is pointed and the opposite end may be headed. The body may contain an eye for a lanyard sling, or be grooved lengthwise. Excludes CABLE PICK and FID.
What is an Aligning Punch? 272 Items: An Aligning Punch (PUNCH,ALIGNING) is a round, square, hexagonal or octagonal bodied hand tool, having a round tapered section 6-1/2 inches (165.1 mm) or more in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, DRIFT and DRIFTPIN.
What is a Drift Punch? 25 Items: A Drift Punch (PUNCH,DRIFT) is a round, square, hexagonal, or octagonal bodied hand tool, having a round tapered section 4 to 6 inches (101.6 mm to 152.4 mm) inclusive in length, which terminates in a flat blunt face. See also PUNCH, DRIVE PIN; PUNCH, ALIGNING; and DRIFTPIN.
What is a Putty Knife? 36 Items: A Putty Knife (KNIFE,PUTTY) is a hand tool with a nonedged blade fixed to a handle for laying on and smoothing putty and the like.
What is a Socket Wrench Adapter-Extension? 40 Items: A Socket Wrench Adapter-Extension (ADAPTER-EXTENSION,SOCKET WRENCH) is a rigid item four inches (101.6 mm) or over in length. Used to connect sockets to handles, power tools or to other attachments which are not designed for direct mating to each other. See also RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; EXTENSION, SOCKET WRENCH; ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD; and ADAPTER, SOCKET WRENCH. Excludes HOLDER, SCREWDRIVER BIT, FEMALE SQUARE DRIVE.
What is a Socket Wrench Attachment Universal Joint? 30 Items: A Socket Wrench Attachment Universal Joint (UNIVERSAL JOINT,SOCKET WRENCH ATTACHMENT) is a connection for socket wrenches and handles. Consists of an internal drive on one end and an external drive on the opposite end, of the same size, connected by a cross pin device to permit swivel up to 90 degrees (1.6 radians).
What is a Socket Wrench Extension? 184 Items: A Socket Wrench Extension (EXTENSION,SOCKET WRENCH) is an attachment for extending the drive length of socket wrenches or handles. The body of the item may be either a coil spring or a solid bar. The items permit the connection of ends that are designed for direct mating to each other. See also ADAPTER, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH ATTACHMENT; and ADAPTER, SOCKET, CROWFOOT SOCKET WRENCH HEAD.
What is a Socket Wrench Ratchet Attachment? 47 Items: A Socket Wrench Ratchet Attachment (RATCHET ATTACHMENT,SOCKET WRENCH) is a connection for socket wrenches and handles. Consists of a ratcheting mechanism with an internal drive on one end and an external drive on the opposite end of the same size. The item is designed to permit continuous rotation of the socket in one direction without removing the socket or handle and without a complete rotation of the handle.
What is a Wrench Extension Handle? 81 Items: A Wrench Extension Handle (HANDLE,EXTENSION,WRENCH) is a tubular item with a lockhole which is designed to fit over and engage a locking button on the shank of items such as stub end type box wrenches, in order to furnish greater leverage.
What is a Socket Wrench Crowfoot Attachment? 155 Items: A Socket Wrench Crowfoot Attachment (CROWFOOT ATTACHMENT,SOCKET WRENCH) is a wrench component which may contain notches within an open end, box, open wall box, 2 or 3 lug open end wrench opening having a square, internal, fixed, eccentric drive parallel to the wrench opening, designed to receive the external drive end of a HANDLE, SOCKET WRENCH. Items having an open end type wrench opening may have a second drive opening at right angles to the wrench opening. See also SOCKET, CROWFOOT WRENCH HEAD and HEAD, CROWFOOT SOCKET WRENCH.
What is a Socket Head Screw Key Blade? 33 Items: A Socket Head Screw Key Blade (BLADE,SOCKET HEAD SCREW KEY) is a replaceable blade used in KEY, SOCKET HEAD SCREW.
What is a Plier Wrench? 43 Items: A Plier Wrench (WRENCH,PLIER) is a wrench having a plier-like handle, an adjustable toggle pressure lock mechanism and serrated jaws which may be straight, straight and curved, or curved. For smooth jaw items, see CLAMP, PLIER.
What is a Tap And Reamer Wrench? 48 Items: A Tap And Reamer Wrench (WRENCH,TAP AND REAMER) is a hand tool designed for holding and to impart a rotary movement of force to taps and reamers. It may have a ratchet mechanism.
What is an Open End Wrench? 2394 Items: An Open End Wrench (WRENCH,OPEN END) is a nonadjustable wrench having an open end wrenching feature on one or both ends. Excludes WRENCH, OPEN END BOX; WRENCH, LINEMAN'S; and WRENCH, BOX AND OPEN END, COMBINATION.
What is a Combination Box And Open End Wrench? 372 Items: A Combination Box And Open End Wrench (WRENCH,BOX AND OPEN END,COMBINATION) is a nonadjustable wrench having a box wrenching feature on one end and an open end wrenching feature on the other end. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is an Open End Box Wrench? 300 Items: An Open End Box Wrench (WRENCH,OPEN END BOX) is a nonadjustable wrench having an open end box wrenching feature on one or both ends for installing or removing packing nuts, flare nuts, conduit fittings, and the like. It may have a ratchet mechanism. Excludes WRENCH, BOX and WRENCH, OPEN END.
What is a Torque Wrench? 661 Items: A Torque Wrench (WRENCH,TORQUE) is a manual tool for tightening various fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets and other types of wrenching adapters. Torque value may be manually set and adjusted by user or may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is swung at right angle to axis of fastener rotation to apply torque. For items with handles that are spun in-line with axis of fastener rotation to apply torque, see SCREWDRIVER, TORQUE.
What is a Plier Clamp? 32 Items: A Plier Clamp (CLAMP,PLIER) is an item having a plier-like handle and an adjustable toggle pressure lock mechanism having smooth jaws, which may be flat or upset. For serrated jaw items, see WRENCH, PLIER.
What is a Hand-Operated Grommet And Eyelet Press? 12 Items: A Hand-Operated Grommet And Eyelet Press (PRESS,GROMMET AND EYELET,HAND-OPERATED) is a device which punches or pierces holes and in addition fastens or sets eyelets and grommets in cloth, paper and similar material. May be used for fastening or setting rivets, lacing hooks and snaps in cloth, paper and similar material. It is hand operated by lever or screw action. See also PUNCH, EYELET, PLIER TYPE and PRESS, GROMMET AND EYELET, FOOT OPERATED.
What is a Claw Bar? 19 Items: A Claw Bar (BAR,CLAW) is before using, refer to Reference Drawing Group AG.
What is a Shock Type Wheel Stud Nut Wrench? 11 Items: A Shock Type Wheel Stud Nut Wrench (WRENCH,WHEEL STUD NUT,SHOCK TYPE) is a manually operated item designed to remove wheel stud nuts. In operation the inner nut is turned by a socket attached to a shaft on which is a loose swinging weighted handle. The weighted handle may be swung quickly to provide an impact force against the socket to loosen the seized or jammed nuts. The outer nut is held stationary by a separate hexagonal holding wrench.
What is a Drift Pin Set? 30 Items: A Drift Pin Set is a group of DRIFTPIN having different characteristics.
What is a Tire Iron? 25 Items: A Tire Iron is a single bar of various materials having blade like end(s) of various shapes to insert between the rim and the bead of a pneumatic tire to remove and/or replace the tire. Excludes TIRE REMOVING TOOL.
What is a Socket Head Screw Key Set? 115 Items: A Socket Head Screw Key Set (KEY SET,SOCKET HEAD SCREW) is a group of KEY, SOCKET HEAD SCREW having different characteristics. For items which are designed to accommodate interchangeable key bits and screwdriver bits, use SCREWDRIVER BIT SET AND HANDLE.
What is a Blacksmith's Vise? 14 Items: A Blacksmith's Vise (VISE,BLACKSMITH'S) is a clamping device consisting of a mounting plate, one stationary and one manual screw actuated jaw and a supporting member extending downward from the stationary jaw to the floor. Designed to be mounted on a bench, table or the like. May include pipe holding jaws.
What is a Machinist's Vise? 64 Items: A Machinist's Vise (VISE,MACHINIST'S) is a clamping device consisting of a base, one stationary and one manual screw or hydraulic ram actuated jaw, and one or more guide bars or rods. The jaw width is usually 2-1/2 inches (63.5mm) or greater. Designed to be bolt mounted to bench, table or the like. Excludes vises with pipe holding jaws. See also VISE, BENCH AND PIPE. Excludes VISE, SHEET METALWORKER'S.
What is a Clamp Base Bench Vise? 10 Items: A Clamp Base Bench Vise (VISE,BENCH,CLAMP BASE) is a clamping device consisting of a base, one stationary and one manual screw actuated jaw, and one or more guide bars or rods. Designed with an integral clamp for attaching to a bench, table, or the like. Does not include pipe holding jaws.
What is a Fixed Open End Wrench Set? 86 Items: A Fixed Open End Wrench Set (WRENCH SET,OPEN END,FIXED) is a group of WRENCH, OPEN END, FIXED having different characteristics.
What is a Nail Set? 11 Items: A Nail Set is a round knurled, square, hexagonal or octagonal bodied hand tool having a round tapered section terminating in a cupped point. It is designed to set brad head nails below the surface by striking it a hammerlike blow. See also PUNCH, DRIVE PIN.
What is a Socket Wrench Set? 202 Items: A Socket Wrench Set (WRENCH SET,SOCKET) is an assortment of various sizes of WRENCH, SOCKET and/or combinations of SOCKET, SOCKET WRENCH and HANDLE, SOCKET WRENCH. It may include related attachments such as ADAPTER, SOCKET WRENCH; EXTENSION, SOCKET WRENCH; BAR, SOCKET WRENCH HANDLE; RATCHET ATTACHMENT, SOCKET WRENCH; UNIVERSAL JOINT, SOCKET WRENCH and BIT, SCREWDRIVER.
What is an Open End Box Wrench Set? 10 Items: An Open End Box Wrench Set (WRENCH SET,OPEN END BOX) is a group of WRENCH, OPEN END BOX having different characteristics.
What is a Combination Box And Open End Wrench Set? 72 Items: A Combination Box And Open End Wrench Set (WRENCH SET,COMBINATION BOX AND OPEN END) is a group of WRENCH, BOX AND OPEN END, COMBINATION having different characteristics.
What is a Box Wrench Set? 36 Items: A Box Wrench Set (WRENCH SET,BOX) is a group of box wrenches having different characteristics. It may include a HANDLE, EXTENSION WRENCH. See also WRENCH SET, COMBINATION, BOX AND OPEN END.
What is a Hot Line Stick? 26 Items: A Hot Line Stick is a hand tool consisting of a straight, round stick (pole) made of a suitable nonconductive material with a tool fixed to one end. The other end may be plain or have a butt mounting device fixed to it. Various types of attachments (hooks, rings, and bands) may be fixed to the body. It is designed for use in the repair and maintenance of live high voltage aerial lines. Excludes hot line sticks without heads.
Handle,Mattock-Pick 15 Items
What is a Wrench Kit? 73 Items: A Wrench Kit is an assortment of various types and sizes of wrenches such as SOCKET, SOCKET WRENCH; WRENCH, OPEN END, FIXED; WRENCH, BOX and the like. It may include adapter(s), ratchet(s) and the like. See also WRENCH SET (as modified.
What is a Brad Awl? 15 Items: A Brad Awl (AWL,BRAD) is a small, pointed tool used by shoemakers, saddlers, cabinetmakers, and the like for piercing small holes in wood, leather, and similar materials, and consists of a handle with a ferrule and a blade. The blade is round, terminating in a beveled, sharp straight edge and has a shank which passes through the center of the handle.
What is a Scratch Awl? 20 Items: A Scratch Awl (AWL,SCRATCH) is an item whose nominal length of blade is less than 4 inches (101.6 millimeters) and is provided with a nondetachable handle.
What is a Screw Extractor Set? 10 Items: A Screw Extractor Set (EXTRACTOR SET,SCREW) is a group of EXTRACTOR, SCREW having different characteristics. It may contain drills.
What is a Hand Screw Jack? 102 Items: A Hand Screw Jack (JACK,SCREW,HAND) is excludes JACK, SCISSORS, HAND; JACK, REEL, HAND; JACK, DOLLY TYPE, MECHANICAL; JACK, PLANER; JACK, VERTICAL; and JACK, BUMPER.
Jack,Scissors,Hand 26 Items
What is a Piston Ring Expander? 23 Items: A Piston Ring Expander (EXPANDER,PISTON RING) is a plier-like hand tool, designed to grip and expand piston rings when installing or removing same from pistons.
Mallet,Plastic 62 Items
Mallet,Rubber 10 Items
What is a Wood Mallet? 37 Items: A Wood Mallet (MALLET,WOOD) is excludes MALLET, CALKING; MALLET, HAWSING and MALLET, SERVING.
What is a Rack Bar Jack? 30 Items: A Rack Bar Jack (JACK,RACK BAR) is excludes JACK, BUMPER and JACK, REEL, HAND.
What is a Pneumatic Tire Valve Core Inserter And Remover? 14 Items: A Pneumatic Tire Valve Core Inserter And Remover (INSERTER AND REMOVER,PNEUMATIC TIRE VALVE CORE) is a bar of steel having a small cylindrical slotted end for removing or installing a valve core in a valve stem by a screwing motion. See also REPAIR TOOL, PNEUMATIC TIRE VALVE.
What is a Hand Tube Swaging Tool Kit? 20 Items: A Hand Tube Swaging Tool Kit (SWAGING TOOL KIT,TUBE,HAND) is a hand-operated noncutting tool consisting of one or more PUNCH, TUBE SWAGING, HAND and a tube flaring bar.
What is a Hand Tube Flaring Punch? 11 Items: A Hand Tube Flaring Punch (PUNCH,TUBE FLARING,HAND) is a noncutting tool having a shaped end or section designed to flare the ends of tubes. One type is designed to flare the ends of tubes against a tube sheet, and another to flare tube ends to mate with tube fittings. Includes punch components of FLARING TOOL, TUBE, HAND.
What is a Hose Strap Band Clamping Tool? 26 Items: A Hose Strap Band Clamping Tool (CLAMPING TOOL,STRAP BAND,HOSE) is an item designed to tension and lock metal straps around a rubber hose, and the like. It is also used to clamp and hold fittings therein.
What is a Mechanical Puller? 3073 Items: A Mechanical Puller (PULLER,MECHANICAL) is a puller manually operated by means of gearing, leverage, jack screw, slide hammer, physical impact, or any combination thereof. It includes items with a series of parts to give a different spread and/or reach. For items with additional parts which can be assembled into various different functional combinations, except spread and/or reach, see PULLER KIT, UNIVERSAL. Excludes hydraulic force actuated items.
Puller Attachment,Mechanical 470 Items
What is a Slip Joint Pliers? 84 Items: A Slip Joint Pliers (PLIERS,SLIP JOINT) is a tool having gripping jaws and a joint adjustable to two or more positions to provide a wide or narrow opening for the jaws. See also PLIERS and PLIERS (as modified).
What is a Brake Repair Pliers? 14 Items: A Brake Repair Pliers (PLIERS,BRAKE REPAIR) is a tool having jaws designed for use in brake repair operations, such as removing and replacing items such as keys, springs, and the like. See also PLIERS and PLIERS (as modified).
What is a Retaining Ring Pliers? 226 Items: A Retaining Ring Pliers (PLIERS,RETAINING RING) is see also PLIERS and PLIERS (as modified).
What is a Valve Spring Compressor? 12 Items: A Valve Spring Compressor (COMPRESSOR,VALVE SPRING) is a hand tool designed to compress valve springs on engines by compressing together both ends of the spring. See also LIFTER, VALVE SPRING.
What is a Socket Wrench Socket Set? 81 Items: A Socket Wrench Socket Set (SOCKET SET,SOCKET WRENCH) is a group of SOCKET, SOCKET WRENCH having different characteristics. See also WRENCH SET, SOCKET.
What is a Screwdriver Bit Set And Handle? 56 Items: A Screwdriver Bit Set And Handle is an item consisting of a set of screwdriver bits and a handle to accommodate the bits. The set of bits may consist of one type or various types having different characteristics. For items having a ratcheting mechanism, see SCREWDRIVER, RATCHET. Excludes SCREWDRIVER, JEWELER'S, SWIVEL KNOB and SCREWDRIVER, OFFSET.
What is a Screwdriver Bit Set? 15 Items: A Screwdriver Bit Set (BIT SET,SCREWDRIVER) is a group of BIT, SCREWDRIVER having different characteristics.
What is a Swivel Knob Jeweler's Screwdriver Set? 11 Items: A Swivel Knob Jeweler's Screwdriver Set (SCREWDRIVER SET,JEWELER'S,SWIVEL KNOB) is a group of SCREWDRIVER, JEWELER'S, SWIVEL KNOB having different characteristics.
What is an Inspection Mirror? 29 Items: An Inspection Mirror (MIRROR,INSPECTION) is an item which has a mirror attached to one end of a rod in such a manner that it may be inserted past obstructions. The mirror can be fixed or adjustable and may or may not have locking facilities. The rod may be telescoping or flexible and/or equipped with an integrated light.
What is a Cross Tip Screwdriver Set? 14 Items: A Cross Tip Screwdriver Set (SCREWDRIVER SET,CROSS TIP) is a group of SCREWDRIVER, CROSS TIP having different characteristics.
What is a Spanner Wrench Set? 18 Items: A Spanner Wrench Set (WRENCH SET,SPANNER) is a group of items under WRENCH, SPANNER having different characteristics.
What is a Drive Pin Punch Set? 31 Items: A Drive Pin Punch Set (PUNCH SET,DRIVE PIN) is a group of PUNCH, DRIVE PIN having different characteristics.
What is an Aligning Punch Set? 13 Items: An Aligning Punch Set (PUNCH SET,ALIGNING) is a group of PUNCH, ALIGNING having different characteristics. See also DRIFTPIN SET.
What is a Slugging Type Box Wrench Socket? 16 Items: A Slugging Type Box Wrench Socket (SOCKET,SLUGGING TYPE BOX WRENCH) is an item having a hexagonal external drive at one end, made to fit into the internal hexagonal or 12-point opening of a slugging type box wrench. The opposite end has a single-broached hexagonal opening of the same size as the external drive. The item is designed with extra thick walls to withstand the impact of sledge blows on the driving wrench.
What is a Mechanical Puller Step Plate? 44 Items: A Mechanical Puller Step Plate (STEP PLATE,MECHANICAL PULLER) is a circular disk, flanged to provide a shoulder, and designed to provide a base for the screw point of a PULLER, MECHANICAL when pulling externally mounted bearings, gears, and the like from hollow shafts or housings. It has a concentric, countersunk hole to accommodate the puller screw point.
What is a Solid Center Punch? 79 Items: A Solid Center Punch (PUNCH,CENTER,SOLID) is a round knurled, square hexagonal or octagonal bodied hand tool having a round tapered section terminating in a blunt conical point which is ground to an included angle of approximately 60 to 90 degrees (1.047 radians to 1.570 radians). See also PUNCH, CENTER, AUTOMATIC. Excludes PUNCH, PRICK.
What is a Cable Type Ratchet Lever Puller? 20 Items: A Cable Type Ratchet Lever Puller (PULLER,RATCHET LEVER,CABLE TYPE) is an item consisting of a metal frame and ratchet lever reel to which is attached one end of a flexible cable (wire rope). The cable feeds through the fast eye in the metal frame, and may be reeved through a slip hook tackle hook. See also BINDER, LOAD; HOIST, WIRE ROPE and STRETCHER, WIRE.
What is an Electronic Equipment Tuning Wand? 18 Items: An Electronic Equipment Tuning Wand (TUNING WAND,ELECTRONIC EQUIPMENT) is a hand-held rod used in determining the adjustment of the windings of a radio frequency coil. It is made of insulating material with iron on one end and brass on the other end. By inserting the iron end in the coil, the inductance is increased and by inserting the brass end, the inductance is decreased.
What is a Combination Open End And Spanner Wrench? 14 Items: A Combination Open End And Spanner Wrench (WRENCH,OPEN END AND SPANNER,COMBINATION) is a tool having open end wrench characteristics at one end and spanner wrench features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s) at the other end.
What is a Detent Handling Tool? 187 Items: A Detent Handling Tool (HANDLING TOOL,DETENT) is a specially designed handling tool consisting of a rigid bar with a T-handle on one end. The other end is equipped with threads designed to mate the threads of a detent to facilitate inserting or extracting.
What is a Hand Material Handling Hook? 23 Items: A Hand Material Handling Hook (HOOK,MATERIAL HANDLING,HAND) is a hook whose curved end conforms to Style AP1, AP2, AP3 or AP4 of Reference Drawing Group AP. Excludes HOOK, MANHOLE COVER, HAND; HOOK, WIRE BREAKING, HAND; HOOK, ROCK CRUSHER FEEDING, HAND; HOOK, STRAINER REMOVING, HAND and HOOKS, BAG HANDLING, HAND.
What is a Magnetic Retrieving Tool? 11 Items: A Magnetic Retrieving Tool (RETRIEVING TOOL,MAGNETIC) is a hand-operated magnetic device used to locate and pick up metallic articles, such as bolts, nuts, pins, washers, and the like, in confined spaces. It may be rigid, flexible or adjustable. Excludes FINGER, MECHANICAL.
What is a Mechanical Puller Adapter? 78 Items: A Mechanical Puller Adapter (ADAPTER,MECHANICAL PULLER) is an item having a threaded hole to engage the forcing screw and an external or internal thread to engage the thread of the object to be pulled. Used with mechanical pullers not designed for direct mating to objects to be pulled.
What is a Combination Box And Open End Box Wrench? 13 Items: A Combination Box And Open End Box Wrench (WRENCH,BOX AND OPEN END BOX,COMBINATION) is a double end wrench, box and open end box, primarily designed for removing or replacing tube fittings. The opening in the open end box may be machined at an angle from the longitudinal center line of the wrench.
What is a Screw Thread Insert Inserter? 136 Items: A Screw Thread Insert Inserter (INSERTER,SCREW THREAD INSERT) is a tool designed to install a SCREW THREAD INSERT.
What is a Flat Tip Screwdriver Set? 48 Items: A Flat Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP) is a group of SCREWDRIVER, FLAT TIP having different characteristics.
What is a Terminal Crimping Tool Contact Positioner? 89 Items: A Terminal Crimping Tool Contact Positioner (CONTACT POSITIONER,TERMINAL CRIMPING TOOL) is a device designed to regulate the positioning of the contact crimp barrel, the crimp depth, and the point of ratchet release in a tool which is designed to affix a terminal to an electrical wire.
What is a Torque Wrench Multiplier? 16 Items: A Torque Wrench Multiplier (MULTIPLIER,TORQUE WRENCH) is a device designed for use in conjunction with a torque wrench to provide a power ratio and to increase the torque of the wrench.
What is an Adjustable Wrench? 138 Items: An Adjustable Wrench (WRENCH,ADJUSTABLE) is a single or double end wrench having a frame and upper jaw(s) of one piece construction. It incorporates a mechanism designed to adjust the lower jaw to the desired size of wrench opening. The jaws are flat, parallel, and smooth. The handle is straight or S shaped.
What is a Ratchet Wrench? 239 Items: A Ratchet Wrench (WRENCH,RATCHET) is a single or double end wrench having a reversible or nonreversible ratchet socket on one or both ends. One end may have a fixed socket or handgrip. It may have a wrench opening through the handle. For items with drive tang, see HANDLE, SOCKET WRENCH.
Handle,Hammer 75 Items
Handle,Shovel 10 Items
What is a Socket Wrench Spanner Attachment? 88 Items: A Socket Wrench Spanner Attachment (SPANNER ATTACHMENT,SOCKET WRENCH) is an item having an adjustable or fixed span with pin, hook, or key type end that is used to fit and turn various size retaining rings, cover plates, plugs, couplings, and like parts. Usually designed to be driven by a male driver.
What is a Retaining Ring Installation Tool? 44 Items: A Retaining Ring Installation Tool (INSTALLATION TOOL,RETAINING RING) is an item designed to facilitate placement of various size radially-installed rings. It has straight, angled, and/or offset slotted blade tips, with milled recess underside. It may or may not include underside spring tension arm.
What is a Tacker? 16 Items: A Tacker is a hand-operated, hammerlike or gunlike item without a clincher, used to drive preformed connecting elements like pins, nails or staples through one object or piece of material into another. Excludes STAPLER (as modified).
What is a Bearing And Bushing Inserter? 290 Items: A Bearing And Bushing Inserter (INSERTER,BEARING AND BUSHING) is a hand tool designed to install bearings and/or bushings onto shafts and/or into holes. It may be operated by a pushing or a striking force.
What is a Bearing And Bushing Remover? 207 Items: A Bearing And Bushing Remover (REMOVER,BEARING AND BUSHING) is a hand tool designed to remove bearings and/or bushings from shafts and/or holes. Excludes PULLER (as modified).
What is a Seal Inserter? 939 Items: A Seal Inserter (INSERTER,SEAL) is a hand tool designed to install various seals onto shafts and/or into holes. It may be operated by a pushing or striking force.
What is a Seal Remover? 14 Items: A Seal Remover (REMOVER,SEAL) is a hand tool designed to remove seals from shafts and/or holes. Excludes PULLER (as modified).
What is an Electrical Contact Inserter? 93 Items: An Electrical Contact Inserter (INSERTER,ELECTRICAL CONTACT) is a hand tool designed for installing a CONTACT, ELECTRICAL on various types of electrical/electronic components.
What is an Electrical Contact Remover? 161 Items: An Electrical Contact Remover (REMOVER,ELECTRICAL CONTACT) is a hand tool designed for removing a CONTACT, ELECTRICAL from various types of electrical/electronic components.
What is a Preformed Packing Inserter? 94 Items: A Preformed Packing Inserter (INSERTER,PREFORMED PACKING) is a hand tool designed to install a PACKING, PREFORMED.
What is a Drill Guide? 141 Items: A Drill Guide (GUIDE,DRILL) is an item designed to center a drill for drilling a hole in a semifinished product or workpiece.
What is a Leveling-Support Jack? 53 Items: A Leveling-Support Jack (JACK,LEVELING-SUPPORT) is a device usually of single leg construction incorporating one of the various methods of jacking. The base end contacts the ground or floor, and the opposite end or upper portion has facilities for attaching to the item to be supported. It is used as an auxiliary support for leveling and/or preventing movement. Excludes JACK, LEVELING-SUPPORT GUIDED MISSILE ERECTOR-LAUNCHER; JACK, TRANSPORTABLE SHELTER; and SUPPORT, RETRACTABLE, SEMITRAILER. See also JACK (as modified).
What is a Six Point Tip Screwdriver? 155 Items: A Six Point Tip Screwdriver (SCREWDRIVER,SIX POINT TIP) is a manual screwdriver having a single nonremoveable blade having a tip with six rounded points.
What is a Seal Inserter And Remover? 147 Items: A Seal Inserter And Remover (INSERTER AND REMOVER,SEAL) is a hand tool designed to install and remove various seals from shafts and/or holes. It may be operated by a pushing or striking force.
What is a Bearing And Bushing Inserter And Remover? 478 Items: A Bearing And Bushing Inserter And Remover (INSERTER AND REMOVER,BEARING AND BUSHING) is a hand tool designed to install and remove bearings and/or bushings from a shaft or hole. It may be operated by a pushing or a striking force.
What is a Preformed Packing Inserter And Remover? 34 Items: A Preformed Packing Inserter And Remover (INSERTER AND REMOVER,PREFORMED PACKING) is a hand tool designed to install and remove a PACKING, PREFORMED.
What is a Pin Remover? 34 Items: A Pin Remover (REMOVER,PIN) is a hand tool designed to facilitate the removal of a pin from a hole.
What is a Pin Inserter And Remover? 13 Items: A Pin Inserter And Remover (INSERTER AND REMOVER,PIN) is a rodlike tool designed to facilitate the insertion and removal of a pin from a hole.
What is an Electrical Contact Inserter And Remover? 37 Items: An Electrical Contact Inserter And Remover (INSERTER AND REMOVER,ELECTRICAL CONTACT) is a hand tool designed for installing and removing a CONTACT, ELECTRICAL on various types of electrical/electronics components.
What is a Piston Inserter? 40 Items: A Piston Inserter (INSERTER,PISTON) is a tool designed to permit installation of a piston or piston assembly without damaging the packings or piston.
What is a Spring Inserter And Remover? 85 Items: A Spring Inserter And Remover (INSERTER AND REMOVER,SPRING) is a tool specifically designed to facilitate the installation and/or removal of springs.
What is a Stud Remover? 13 Items: A Stud Remover (REMOVER,STUD) is an item or group of items designed to extract studs. It may include collets, guides, collet housings, holders and the like.
What is a Stud Inserter? 22 Items: A Stud Inserter (INSERTER,STUD) is a device designed to drive in studs. It does not have any facilities for removing or extracting studs. See also INSERTER AND REMOVER, STUD.
What is a Stud Inserter And Remover? 17 Items: A Stud Inserter And Remover (INSERTER AND REMOVER,STUD) is a group of items designed to extract and to drive studs. It may include collets, guides, housings, holders and the like. See also REMOVER SET, STUD and INSERTER, STUD.
What is a Gear Inserter? 54 Items: A Gear Inserter (INSERTER,GEAR) is a hand tool designed to install various gears onto a gearshaft. It may be operated by a pushing or a striking force.
What is a Crimping Tool Die? 73 Items: A Crimping Tool Die (DIE,CRIMPING TOOL) is an item of two-piece construction designed to be held in a CRIMPING TOOL, TERMINAL, HAND or CRIMPING OUTFIT, HYDRAULIC, WIRE TERMINAL to change the jaw size for use on various types of terminals.
What is an Electrical Connector Inserter? 45 Items: An Electrical Connector Inserter (INSERTER,ELECTRICAL CONNECTOR) is a hand tool designed to hold an electrical connector, and to assist in the positioning and installation of the connector on a cover, panel or the like.
What is a Float? 12 Items: A Float is a tool used for concrete, plastering and grouting work.
What is a Mechanical Puller Set? 19 Items: A Mechanical Puller Set (PULLER SET,MECHANICAL) is two or more separate PULLER, MECHANICAL of different fixed sizes.
What is a Lifting Pneumatic Bag? 11 Items: A Lifting Pneumatic Bag (PNEUMATIC BAG,LIFTING) is a device made of flexible material designed to lift another item by being placed under the item and being inflated with air or some other gas. It will have a means of being connected to an air or gas source and may include a connector hose, a control valve and/or a pressure regulator.
What is a Cable Tie Installation Tool? 22 Items: A Cable Tie Installation Tool (INSTALLATION TOOL,CABLE TIE) is a lightweight, hand-held, hand-operated tool designed to fasten cable ties, straps and the like. Cable tie is inserted into the nose of the tool flush to the cable tie head. Trigger handle tightens cable tie and cuts off any excess. These installation tools are available in a variety of sizes depending on their intended use with miniature, intermediate, standard, heavy or extra heavy cross section ties.
What is a Bearing Staking Installation Tool? 159 Items: A Bearing Staking Installation Tool (INSTALLATION TOOL,BEARING STAKING) is a hand tool which seats bearings. It can then be attached to a drill press to secure bearings. This is used on items such as BELL CRANK; SWASHPLATE, CONTROLLABLE or other like items where it is necessay to contain the bearing within its assembly.
Wrench Set,Ratchet 15 Items
What is a Sealant Dispenser? 26 Items: A Sealant Dispenser (DISPENSER,SEALANT) is a hand tool having a barrel type container for holding a sealing or adhesive type material which is dispensed through an end nozzle by a hand-controlled plunger, a ratchet-type trigger pressure control plunger, or a powered plunger controlled by a trigger-type operation.
What is a Retaining Ring Pliers Set? 10 Items: A Retaining Ring Pliers Set (PLIERS SET,RETAINING RING) is a group of PLIERS, RETAINING RING having different characteristics.
What is a Hand Armament Subsystem Carrier? 52 Items: A Hand Armament Subsystem Carrier (CARRIER,ARMAMENT SUBSYSTEM,HAND) is a metallic item with a clamp device and/or space for depositing articles. It is used for transporting weapon parts during maintanence and/or repair work, such as gun barrel, automatic loader, breechblock and the like.
What is a Ring Retaining Pliers Tip Set? 13 Items: A Ring Retaining Pliers Tip Set (TIP SET,PLIERS,RING RETAINING) is a collection of removable metallic tips in matched pairs used to provide various size capablities to PLIERS, RING RETAINING which permits the removal and installation of internal and external retaining rings.
What is a Plug Electrical Connector Extractor? 45 Items: A Plug Electrical Connector Extractor (EXTRACTOR,ELECTRICAL CONNECTOR,PLUG) is a hand tool designed to disassemble CONNECTOR, PLUG, ELECTRICAL from a CONNECTOR, RECEPTACLE, ELECTRICAL.
What is a Torque Wrench Adapter Set? 10 Items: A Torque Wrench Adapter Set (ADAPTER SET,TORQUE WRENCH) is tWO or more ADAPTER, TORQUE WRENCH of different sizes.
What is an Electronic Component Inserter And Remover? 79 Items: An Electronic Component Inserter And Remover (INSERTER AND REMOVER,ELECTRONIC COMPONENT) is an item which can insert or remove an electronic component package such as MICROCIRCUIT; RESISTOR, NETWORK (as modified); and the like from its mounting position or socket. Excludes INSERTER AND REMOVER, ELECTRICAL CONTACT; REMOVER, ELECTRICAL CONTACT; EXTRACTOR, ELECTRICAL CARD; EXTRACTOR, ELECTRONIC CRYSTAL UNIT; EXTRACTOR, ELECTRON TUBE.
What is an Impact Type Bit Set And Handle Screwdriver? 14 Items: An Impact Type Bit Set And Handle Screwdriver (SCREWDRIVER,BIT SET AND HANDLE,IMPACT TYPE) is an item consisting of a set of screwdriver bits and a impact driver to accommodate the bits of various types and characteristics. It is designed to transmit a strong rotating movement by the impact of a hammer blowed on the impact driver. It is used to loosen rusted or seized screws. Excludes SCREWDRIVER, BIT SET AND HANDLE.
What is a Hand Vise Jaw? 19 Items: A Hand Vise Jaw (JAW,VISE,HAND) is an item consisting of two opposing parts of a VISE, HAND. The item is moveable and able to open and close. It can hold, grasp or clamp work.
What is a Screwdriver Handle? 28 Items: A Screwdriver Handle (HANDLE,SCREWDRIVER) is an item used to accommodate various types of BIT, SCREWDRIVER. It is designed to rotate a bit that is used for installing or removing screws.
What is a Wire Twister Pliers? 25 Items: A Wire Twister Pliers (PLIERS,WIRE TWISTER) is an item with a built-in spiral device which, when actuated spins longitudinally. The wires gripped in the jaws are twisted. See also CLAMP, WIRE SPLICING.
What is a Socket Wrench Screwdriver Attachment? 284 Items: A Socket Wrench Screwdriver Attachment (SCREWDRIVER ATTACHMENT,SOCKET WRENCH) is an attachment designed to fit over the square external drive end of a HANDLE, SOCKET WRENCH; WRENCH, TORQUE; and the like consisting of one or two-piece configuration having a screw driving tip on one end. Excludes BIT, SCREWDRIVER.
What is a Mechanical Puller Body? 45 Items: A Mechanical Puller Body (BODY,PULLER,MECHANICAL) is an item designed to support and enclose the internal parts of a PULLER,MECHANICAL.
What is a Flat Tip And Cross Tip Screwdriver Set? 39 Items: A Flat Tip And Cross Tip Screwdriver Set (SCREWDRIVER SET,FLAT TIP AND CROSS TIP) is a group of SCREWDRIVER, FLAT TIP and SCREWDRIVER, CROSS TIP of different sizes.
What is a Socket Wrench Screwdriver Attachment Set? 22 Items: A Socket Wrench Screwdriver Attachment Set (SCREWDRIVER ATTACHMENT SET,SOCKET WRENCH) is a set of screwdriver attachment, socket wrench of different sizes. Items consist of a female square drive on one end to attach to a handle, socket wrench and various screwdriver tip configurations on the opposite end. Excludes SCREWDRIVER ATTACHMENT,SOCKET WRENCH
What is an Oil Filter Wrench? 44 Items: An Oil Filter Wrench (WRENCH,OIL FILTER) is a wrench which primarily consists of a strap or band and a securing knurl. It is designed for installing or removing oil filters. It may also be chain, cap or self-gripping type.
What is a Torque Wrench Adapter? 430 Items: A Torque Wrench Adapter (ADAPTER,TORQUE WRENCH) is an adapter which facilitates the use of a torque wrench in various applications. One end is designed for direct mating with the drive tang of a torque wrench and the other end designed to mate with the head of a bolt, nut, or the like, or made to fit into socket wrench or screwdriver bit.
What is a Communications Equipment Spring Adjuster? 13 Items: A Communications Equipment Spring Adjuster (ADJUSTER,SPRING,COMMUNICATIONS EQUIPMENT) is a single or double end tool, equipped with slot(s) of various dimensions or with cylindrical rod(s), used for adjusting the springs or spring tensioned parts of electronic equipment.
What is a Rotating Members Aligning Tool? 32 Items: A Rotating Members Aligning Tool (ALIGNING TOOL,ROTATING MEMBERS) is a tool used to partially rotate one of two rotating members for alignment during assembly.
What is a Final Drive Assembly Alignment Pin? 41 Items: A Final Drive Assembly Alignment Pin (ALIGNMENT PIN,FINAL DRIVE ASSEMBLY) is a special designed pin used in the assembling of the final drive.
Arm,Handling Tool 77 Items
What is a Splicing Sleeve Compressing Tool? 23 Items: A Splicing Sleeve Compressing Tool (COMPRESSING TOOL,SPLICING SLEEVE) is a hand tool having hinged leverage handles similar to a CUTTER, BOLT or pliers, designed to compress a splicing sleeve when joining the ends of two conductors, or when forming an eye splice in the end of a wire rope. Excludes CRIMPING TOOL, TERMINAL, HAND.
What is a Hand Screw Jack Extension? 14 Items: A Hand Screw Jack Extension (EXTENSION,HAND SCREW JACK) is a length of externally threaded rigid shafting which is the adjustable section of a JACK, SCREW, HAND.
What is a Mechanical Puller Gear Adapter? 21 Items: A Mechanical Puller Gear Adapter (GEAR ADAPTER,PULLER,MECHANICAL) is an adapter that adapts a PULLER,MECHANICAL, to pull a certain gear.
Handle,Hydraulic Jack 18 Items
What is a Female Electrical Contact Resizing Tool? 11 Items: A Female Electrical Contact Resizing Tool (RESIZING TOOL,FEMALE ELECTRICAL CONTACT) is a tool designed to shape to a specific size, female contacts such as those used on electrical connectors, tube sockets, crystal sockets, and pin jacks.
What is a Screwdriver And Socket Wrench Combination? 13 Items: A Screwdriver And Socket Wrench Combination is a hand-tool formed into an integral unit with a socket wrench at one end and a screwdriver bit at the other end. See also SCREWDRIVER AND WRENCH ASSEMBLY.
What is a Hand Hose Fitting Swaging Tool Kit? 11 Items: A Hand Hose Fitting Swaging Tool Kit (SWAGING TOOL KIT,HOSE FITTING,HAND) is a device, hydraulically actuated by hand or power operated pump, consisting of face plate, adapter plate, finger cages, fingers, ram, bushing, and expanding mandrels combined on a single base in various functional arrangements. It is used for swaging the outside diameter of hose assembly fittings, expanding the inside diameter of hose assemblies, and securing the fabrication of hose assemblies. Included are a hand or power operated pump, lubricant, cases, and trays.
What is a Catch Lever Tool? 12 Items: A Catch Lever Tool (LEVER TOOL,CATCH) is a specially designed hand tool which engages the opening and closing lever of a CATCH (as modified) for ease of operation. It is constructed of thin rigid material, usually flat, and one end has an engaging tongue.
What is a Manual Impact Wrench? 11 Items: A Manual Impact Wrench (WRENCH,IMPACT,MANUAL) is a manually operated handheld tool consisting of spring-loaded handle and a power-impact head which delivers a torsional impact from either continuous movement of the handle in one direction, or by a reciprocating action. It is used in tightening and loosening fasteners, such as bolts, nuts, and the like. The item may include sockets, extensions and offset fittings, nut runners, and the like.
What is a Drift? 63 Items: A Drift is an item consisting of a tubular body fitted with replaceable tips. It is designed to insert or remove mechanical components where space is restricted.
What is a Nutdriver? 46 Items: A Nutdriver is a non-powered hand tool with a screwdriver style handle, shaft and formed female hex or square socket at driving end.
What is a Locking Device Removal Tool? 12 Items: A Locking Device Removal Tool (REMOVAL TOOL,LOCKING DEVICE) is a hand tool designed to facilitate the removal of a WASHER, KEY and a LOCKING PLATE, NUT AND BOLT.
What is a Hydraulic Fitting Crimping Tool Head? 26 Items: A Hydraulic Fitting Crimping Tool Head (HEAD,CRIMPING TOOL,HYDRAULIC FITTING) is a component of a crimping tool used to compress fittings on fluid tubes. It consists of a U-shape item, in which, are mounted different sizes of DIE, CRIMPING TOOL for tubes of various diameters.
What is a Torque Screwdriver? 11 Items: A Torque Screwdriver (SCREWDRIVER,TORQUE) is a manual tool for tightening vairous fasteners to a precise torque value. Consists of a handle and drive to accommodate female square drive sockets, screwdriver bits, and other types of wrenching adapters. Torque value may be manually set and adjusted by user of may be provided as preset for production line use. A signaling device is generally provided to indicate when set torque value is reached. Handle is spun in-line with axis of fastener rotation to apply torque. For items with handles that are swung at right angle to axis of fastener rotation to apply torque, see WRENCH, TORQUE.
What is a Special Purpose Combination Wrench? 13 Items: A Special Purpose Combination Wrench (WRENCH,COMBINATION,SPECIAL PURPOSE) is a tool having a combination of ends and facets. The ends may have open end, box or spanner characteristics. The sides may have features such as fixed hook(s), pin(s), hole(s), keyway(s), or lug(s). Designed to fit specific items, not sized as standard or metric.
What is a Screwdriver Bit Holder? 56 Items: A Screwdriver Bit Holder (HOLDER,SCREWDRIVER BIT) is an attachment with a socket end for accepting male hexagon shank insert bits and a drive end for adapting to a portable power or hand tool.
What is a Telescoping Pole? 16 Items: A Telescoping Pole (POLE,TELESCOPING) is an item which is designed to be extended or compressed by the sliding of overlapping sections. This item may or may not be able to accommodate an extension.

Stock Items From Supply Class 5120 Page 63 of 110

5120-14-267-6354

5120-14-242-4900

5120-14-221-7398
Cle De Reglage Bobi

142217398
879CL02: RNCC: 3 | RNVC: 2
498200: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-329-6348
De Centrage Obus

143296348
SMS245: RNCC: 3 | RNVC: 2
SMS245: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-380-8398
Faux Mors

143808398
PR47666: RNCC: 3 | RNVC: 2
P47666: RNCC: 5 | RNVC: 2

14 Dec 1982

5120-14-243-6149

5120-14-264-5971

5120-14-521-8705
Dashpot Handling Tool

145218705
OU50340: RNCC: 3 | RNVC: 2
50340: RNCC: 5 | RNVC: 2
ERAMOU50340: RNCC: 5 | RNVC: 2

20 Sep 2000

5120-14-431-7845
Socket Head Screw Key

144317845
0453-6089905: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-443-9562
Socket Wrench Socket

144439562
W266M: RNCC: 3 | RNVC: 9

17 Dec 1990

5120-14-511-1059
Sheet Metalworking Stake

145111059
2660006: RNCC: 3 | RNVC: 2

2 Dec 1998

5120-14-368-0748
Flat Tip Screwdriver

143680748
ACZ.10X200: RNCC: 3 | RNVC: 2
0003987: RNCC: 5 | RNVC: 2
3148510039879: RNCC: 5 | RNVC: 2
ACH.10X200: RNCC: 5 | RNVC: 2
1096478K00: RNCC: 5 | RNVC: 2
91618385: RNCC: 5 | RNVC: 2
91638788: RNCC: 5 | RNVC: 2
AGN10X200: RNCC: 5 | RNVC: 9

19 Jan 1981

5120-14-229-8556
Spanner Wrench

142298556
959232A: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-326-9151
Socket Wrench Screwdriver Attachment

143269151
468720: RNCC: 3 | RNVC: 2
468720: RNCC: 5 | RNVC: 2
LMT468720: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-214-2605
Spanner Wrench

142142605
46150: RNCC: 3 | RNVC: 2
46150: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-463-5577
Bearing And Bushing Inserter And Remover

144635577
45057198: RNCC: 3 | RNVC: 2
45057198: RNCC: 5 | RNVC: 9

17 Jun 1993

5120-14-463-1729
Socket Head Screw Key

144631729
29501050: RNCC: 3 | RNVC: 2

26 May 1993

5120-14-281-1879
Spanner Wrench

142811879
4604: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-031-9133
Socket Wrench Socket

140319133
NS29: RNCC: 3 | RNVC: 2
3148510422107: RNCC: 5 | RNVC: 2

5 Jul 1980

5120-14-306-3510
Pliers

143063510
283: RNCC: 3 | RNVC: 2
283R: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-450-6762
Screwdriver Bit

144506762
EBNA.206: RNCC: 3 | RNVC: 2
EBNA206: RNCC: 5 | RNVC: 2
EBNA.206: RNCC: 5 | RNVC: 2
3148510223162: RNCC: 5 | RNVC: 2
1059080B00: RNCC: 5 | RNVC: 2
91711374: RNCC: 5 | RNVC: 2
0022316: RNCC: 5 | RNVC: 9

16 Oct 1991

5120-14-420-8786
Screwdriver Bit Set And Handle

144208786
16965930: RNCC: 3 | RNVC: 2
16965930: RNCC: 5 | RNVC: 9

22 Dec 1987

5120-14-540-6603
Socket Wrench Extension

145406603
5010575687: RNCC: 3 | RNVC: 2

15 Apr 2004

5120-14-427-1134
Open End Wrench

144271134
537535: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-526-0026
Socket Wrench Adapter

145260026
8033757G00: RNCC: 3 | RNVC: 2

26 Jun 2001

5120-14-346-8313
Hot Line Stick Support

143468313
16561467: RNCC: 3 | RNVC: 2
16561467: RNCC: 3 | RNVC: 9

19 Jan 1978

5120-14-441-1871
Detent Handling Tool

144411871
16741077: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-437-4288
Pin Inserter And Remover

144374288
16380781: RNCC: 3 | RNVC: 2
16380781: RNCC: 5 | RNVC: 9

31 Jan 1990

5120-14-446-7146
Bearing And Bushing Inserter And Remover

144467146
39382901: RNCC: 3 | RNVC: 2
39382901: RNCC: 5 | RNVC: 9

9 Apr 1991

5120-14-436-0192
Preformed Packing Inserter

144360192
RT30540: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-488-3055
Pliers

144883055
420.MT: RNCC: 3 | RNVC: 2
0175720: RNCC: 5 | RNVC: 2
3148511757208: RNCC: 5 | RNVC: 2
420MT: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-217-9954
Torque Wrench Adapter

142179954
0D018: RNCC: 3 | RNVC: 2
0D018: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-341-5744
Spanner Wrench

143415744
RT6072: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-283-3974

5120-14-231-9949
Chasse Axe Special

142319949
586925: RNCC: 3 | RNVC: 9

1 Jan 1967

5120-14-452-5241
De Retreint Bague

144525241
D46813: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-439-3881
Maintien Cle

144393881
J47942: RNCC: 3 | RNVC: 2

25 Apr 1990

5120-14-573-3591
Hand Hammer

145733591
NO PRIMARY REF 14-573-3591: RNCC: 3 | RNVC: 2
6673: RNCC: 5 | RNVC: 2

8 Oct 2012

5120-14-391-6476
Open End Wrench

143916476
NO PRIMARY REF14-391-6476: RNCC: 3 | RNVC: 2
44-1X1 1/16CP: RNCC: 5 | RNVC: 2
91571778: RNCC: 5 | RNVC: 2
44-1X1-1-16CP: RNCC: 5 | RNVC: 2

21 Mar 1984

5120-14-525-4362
Cross Tip Screwdriver

145254362
AZP.1X75: RNCC: 3 | RNVC: 2
3148510134444: RNCC: 5 | RNVC: 2
AZP-1X75: RNCC: 5 | RNVC: 2

30 May 2001

5120-14-573-2048
Detent Release Tool

145732048
CLE DMOA/M: RNCC: 3 | RNVC: 2

21 Sep 2012

5120-14-311-6171
Sertisseur Cable

143116171
TALURIT2-5: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-248-1081

5120-14-216-5156
Screwdriver Bit

142165156
ST.3/4: RNCC: 3 | RNVC: 2
3148515190407: RNCC: 5 | RNVC: 2
ST3-4: RNCC: 5 | RNVC: 2
0519040: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-441-0387
Chemi Extrac Plaque

144410387
8-0144R: RNCC: 3 | RNVC: 2

16 Aug 1990

5120-14-442-5704
Socket Wrench Socket

144425704
GS66-8: RNCC: 3 | RNVC: 2

22 Oct 1990

5120-14-416-6458
Socket Head Screw Key

144166458
27402591-3: RNCC: 3 | RNVC: 2

23 Jun 1987

5120-14-249-9705
Socket Wrench Screwdriver Attachment

142499705
JT.6: RNCC: 3 | RNVC: 2
0506260: RNCC: 5 | RNVC: 2
JT6: RNCC: 5 | RNVC: 2
3148515062605: RNCC: 5 | RNVC: 2
CAE00931: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-247-9660
Cle A Fourche

142479660
RT20924: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-483-0733
Socket Wrench Socket

144830733
S.32LA: RNCC: 3 | RNVC: 2
3148510555027: RNCC: 5 | RNVC: 2
0055502: RNCC: 5 | RNVC: 9

8 Aug 1996

5120-14-533-1341
Mechanical Puller Gear Adapter

145331341
U.53H2: RNCC: 3 | RNVC: 2

23 Jan 2003

5120-14-299-7111
Socket Wrench Socket

142997111
NK.32: RNCC: 3 | RNVC: 2
3148510366302: RNCC: 5 | RNVC: 2
0714 14 07: RNCC: 5 | RNVC: 2
NK-32: RNCC: 5 | RNVC: 2
91711480: RNCC: 5 | RNVC: 2
NK32: RNCC: 5 | RNVC: 2
0036630: RNCC: 5 | RNVC: 9

1 Jan 1973

5120-14-536-2542
Electronic Component Inserter And Remover

145362542
61026450AA: RNCC: 3 | RNVC: 2

22 Jul 2003

5120-14-574-1631
Combination Box And Open End Wrench

145741631
467F.15: RNCC: 3 | RNVC: 2

12 Dec 2012

5120-14-352-1483

5120-14-452-5240
Montage Cone

144525240
D46812: RNCC: 3 | RNVC: 2

8 Jan 1992

5120-14-316-9375
Positionneur Joint

143169375
466-8A2P55: RNCC: 3 | RNVC: 2
466-8A2P55: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-377-6509
Bearing And Bushing Inserter And Remover

143776509
8810131155: RNCC: 3 | RNVC: 2

10 Jun 1982

5120-14-503-4714
Electronic Component Inserter And Remover

145034714
39546829: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-524-9809
Leveling-Support Jack

145249809
11197784: RNCC: 3 | RNVC: 2
SYB2787: RNCC: 5 | RNVC: 2

10 May 2001

5120-14-540-8407
Sand And Gravel Scoop

145408407
050032: RNCC: 3 | RNVC: 2

23 Apr 2004

5120-14-236-2810

5120-14-531-4814
Screwdriver And Socket Wrench Combination

145314814
0457690Y00: RNCC: 3 | RNVC: 2

21 Aug 2002

5120-14-394-3023
Leveling-Support Jack

143943023
M4ZS460D7963: RNCC: 3 | RNVC: 2
28047963: RNCC: 5 | RNVC: 2

28 Aug 1984

5120-14-425-9273
Poussoir

144259273
600170: RNCC: 3 | RNVC: 2
600170: RNCC: 3 | RNVC: 2
F300 0T 024 0421: RNCC: 6 | RNVC: 9

28 Jul 1988

5120-14-226-0542

5120-14-376-2315

5120-14-532-1835
Torque Wrench Adapter

145321835
10567876: RNCC: 3 | RNVC: 2

16 Oct 2002

5120-14-317-0282

5120-14-577-1869
Retaining Ring Pliers

145771869
167G.18: RNCC: 3 | RNVC: 2
139452: RNCC: 5 | RNVC: 2
3148511394526: RNCC: 5 | RNVC: 2

21 Aug 2013

5120-14-253-3722
Feuille De Protecti

142533722
410246M: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-040-4692
Forme

140404692
23992: RNCC: 3 | RNVC: 2
23992: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-269-4767

5120-14-271-6089
Open End Wrench

142716089
69-82: RNCC: 3 | RNVC: 2
E74301C82WWF: RNCC: 5 | RNVC: 1
3272670222526: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-373-7828
Demon Outil Montage

143737828
288S: RNCC: 3 | RNVC: 2

13 Nov 1981

5120-14-217-9945
Torque Wrench Adapter

142179945
0D09: RNCC: 3 | RNVC: 2
0D09: RNCC: 5 | RNVC: 2

1 Jan 1965

5120-14-410-6077
Bearing And Bushing Inserter

144106077
14400486C: RNCC: 3 | RNVC: 2

9 Jul 1986

5120-14-503-4687
Electronic Component Inserter And Remover

145034687
39338357: RNCC: 3 | RNVC: 2

14 Jan 1998

5120-14-400-6030
Electrical Card Extractor

144006030
491708: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-419-7280
Socket Wrench Attachment Universal Joint

144197280
004862: RNCC: 3 | RNVC: 2
4862: RNCC: 5 | RNVC: 2

5 Nov 1987

5120-14-541-5902
Socket Head Screw Key

145415902
908830: RNCC: 3 | RNVC: 2

10 Jun 2004

5120-14-533-6388
Spring Inserter And Remover

145336388
70238539: RNCC: 3 | RNVC: 2

12 Feb 2003

5120-14-404-8659
Electrical Contact Inserter

144048659
49533: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-368-5191
Detent Handling Tool

143685191
8810546700: RNCC: 3 | RNVC: 2

20 Feb 1981

5120-14-274-8356
Hand Sleeve Bearing Burnisher

142748356
160: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-270-9321
Open End Wrench

142709321
15519: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-458-9637
Screwdriver Bit

144589637
ES.148: RNCC: 3 | RNVC: 2
ES148: RNCC: 5 | RNVC: 2

10 Nov 1992

5120-14-479-8100
Screwdriver Bit

144798100
EH.605: RNCC: 3 | RNVC: 2
1112170F00: RNCC: 5 | RNVC: 2
3148510233949: RNCC: 5 | RNVC: 2
0023394: RNCC: 5 | RNVC: 9

7 Feb 1996

5120-14-446-8359
Impact Type Bit Set And Handle Screwdriver

144468359
NS.265M: RNCC: 3 | RNVC: 2
3148515103858: RNCC: 5 | RNVC: 2
NS265M: RNCC: 5 | RNVC: 2
0510385: RNCC: 5 | RNVC: 9

17 Apr 1991

5120-14-449-0140
Seal Inserter And Remover

144490140
76190: RNCC: 3 | RNVC: 2
89280676: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-231-9963
Extracteur De Pigno

142319963
DEF: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-040-2910
Tige Dextraction

140402910
RT5390: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-240-5528

5120-14-546-6356
Demonte-Roue Libre

145466356
RL-18720: RNCC: 3 | RNVC: 2

21 Jul 2005

5120-14-529-1944
Support Comparateur

145291944
9992479-7: RNCC: 3 | RNVC: 2

15 Mar 2002

5120-14-490-6887
Drill

144906887
240 D 01884 015: RNCC: 3 | RNVC: 2
F300 0T 000 0996: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-332-6375
Spanner Wrench

143326375
466-9M17P54: RNCC: 3 | RNVC: 2
466-9M17P54: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-362-7536

5120-14-217-2666

5120-14-394-4478
Electrical Contact Inserter

143944478
69526-2: RNCC: 3 | RNVC: 2

28 Aug 1984

5120-14-305-6013
Socket Wrench Screwdriver Attachment

143056013
JT.1/4: RNCC: 3 | RNVC: 2
JT1-4: RNCC: 5 | RNVC: 2
3148515065200: RNCC: 5 | RNVC: 2
0506520: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-216-5155
Screwdriver Bit

142165155
ST.5/8: RNCC: 3 | RNVC: 2
3148515190209: RNCC: 5 | RNVC: 2
ST5-8: RNCC: 5 | RNVC: 2
0519020: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-552-6218
Socket Wrench Socket Set

145526218
S.400AVSE: RNCC: 3 | RNVC: 2
S.400AVSE: RNCC: 5 | RNVC: 2
3148510589077: RNCC: 5 | RNVC: 2

18 Jan 2007

5120-14-570-5646
Rope Coiling Device

145705646
202642-0: RNCC: 3 | RNVC: 2

5 Jan 2012

5120-14-521-6332
Screwdriver Bit

145216332
EX.627: RNCC: 3 | RNVC: 2
0614 332 5: RNCC: 5 | RNVC: 2
0025868: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-511-3877
Cross Tip Screwdriver

145113877
AZPH.4X200: RNCC: 3 | RNVC: 2
0613 918 4: RNCC: 5 | RNVC: 2
0613 940 4: RNCC: 5 | RNVC: 2
13461: RNCC: 5 | RNVC: 2
3148510134611: RNCC: 5 | RNVC: 2
ACPH.4X200: RNCC: 5 | RNVC: 2

16 Dec 1998

5120-14-222-9015
Socket Wrench Socket

142229015
0055440: RNCC: 3 | RNVC: 2
S.26L: RNCC: 5 | RNVC: 2
S26L: RNCC: 5 | RNVC: 2

1 Jan 1966

5120-14-511-7648
Hand Blind Riveter

145117648
Y.M46: RNCC: 3 | RNVC: 2
3148510881607: RNCC: 5 | RNVC: 2

15 Jan 1999

5120-14-353-5152

5120-14-237-3715
Extracteur

142373715
H90R1005: RNCC: 3 | RNVC: 2
530517: RNCC: 5 | RNVC: 2
H90R1005: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-313-5446
Tirant

143135446
53MA401821: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-409-3095
Plaque De Levage

144093095
DLT100762: RNCC: 3 | RNVC: 2

27 May 1986

5120-14-384-1980
Faux Mors

143841980
26-281-2: RNCC: 3 | RNVC: 2

4 May 1983

5120-14-404-8589
Electrical Contact Remover

144048589
39083536: RNCC: 3 | RNVC: 2

20 Nov 1985

5120-14-542-4812
Open End Wrench

145424812
8044202B00: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-323-1305

5120-14-375-3715
Outillage De Verrou

143753715
045W02-572791X: RNCC: 3 | RNVC: 2

26 Feb 1982

5120-14-466-3712
Equipe Extracteur

144663712
61AM013: RNCC: 3 | RNVC: 2

3 Nov 1993

5120-14-567-9587
Seal Inserter

145679587
261233652: RNCC: 3 | RNVC: 2

28 Apr 2011

5120-14-342-5331

5120-14-304-1890

5120-14-340-0554

5120-14-361-8455
Centrage Equipe

143618455
8812486200: RNCC: 3 | RNVC: 2

20 Feb 1980

5120-14-250-0401

5120-14-491-3828
Cle Emb

144913828
1140: RNCC: 3 | RNVC: 2
F300 0T 002 6137: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0415
Cle

144910415
75292961: RNCC: 3 | RNVC: 2
F300 0T 001 1688: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0213
Outil

144910213
4602 010 800 009: RNCC: 3 | RNVC: 2
F300 0T 001 1008: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-263-2006

5120-14-308-8480
Spanner Wrench

143088480
45945: RNCC: 3 | RNVC: 2
45945: RNCC: 5 | RNVC: 2

1 Jan 1974

5120-14-375-3129

5120-14-571-2260
Crimping Tool Die

145712260
985914: RNCC: 3 | RNVC: 2
FACOM 985914: RNCC: 5 | RNVC: 2

1 Mar 2012

5120-14-322-0443
Fourreau Equipe

143220443
89811: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-509-1417
Socket Head Screw Key

145091417
200863: RNCC: 3 | RNVC: 2

21 Oct 1998

5120-14-433-6137
Socket Wrench Socket

144336137
8816175000: RNCC: 3 | RNVC: 2
89415638: RNCC: 5 | RNVC: 2

2 Aug 1989

5120-14-322-9419
Flat Tip Screwdriver

143229419
AB.4X75: RNCC: 3 | RNVC: 2
AB4X75: RNCC: 5 | RNVC: 2
3148510027005: RNCC: 5 | RNVC: 2
0002700: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-424-5273
Spanner Wrench

144245273
7M489: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-484-3845
Bearing Staking Installation Tool

144843845
OU142828: RNCC: 3 | RNVC: 2
OU142828: RNCC: 5 | RNVC: 2
OU142828: RNCC: 5 | RNVC: 9
F300 0T 020 6661: RNCC: 6 | RNVC: 9

14 Nov 1996

5120-14-555-5961
Bearing Staking Installation Tool

145555961
14427: RNCC: 3 | RNVC: 2

29 Nov 2007

5120-14-419-9203
Socket Head Screw Key

144199203
502296XTRAM2: RNCC: 3 | RNVC: 2
502296X: RNCC: 5 | RNVC: 2

10 Nov 1987

5120-14-368-0374
Mechanical Puller Attachment

143680374
U41GL: RNCC: 3 | RNVC: 2

19 Jan 1981

5120-14-488-3065
Fixed Open End Wrench Set

144883065
44.JE9T: RNCC: 3 | RNVC: 2
44JE9T: RNCC: 5 | RNVC: 2
0529206: RNCC: 5 | RNVC: 2
3148515292064: RNCC: 5 | RNVC: 2

29 Apr 1997

5120-14-259-2646
Spanner Wrench

142592646
0U12833: RNCC: 3 | RNVC: 2

1 Jan 1969

5120-14-431-7852
Socket Head Screw Key

144317852
0453-6089912: RNCC: 3 | RNVC: 2

10 May 1989

5120-14-285-5969

5120-14-223-3001

5120-14-390-4253

5120-14-479-4773
Montage De Reg

144794773
700388-00: RNCC: 3 | RNVC: 2

15 Jan 1996

5120-14-384-6302
Electrical Card Extractor

143846302
16928953: RNCC: 3 | RNVC: 2
16928953: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-433-3272
Outillage Mandrin

144333272
540184: RNCC: 3 | RNVC: 2
00540184: RNCC: 5 | RNVC: 2

19 Jul 1989

5120-14-285-5943

5120-14-384-6319
Electrical Card Extractor

143846319
16928936: RNCC: 3 | RNVC: 2
16928936: RNCC: 5 | RNVC: 9

2 Jun 1983

5120-14-490-6885
Drill

144906885
240 D 01884 012: RNCC: 3 | RNVC: 2
F300 0T 000 0994: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-341-4025
Pince A Ecarter

143414025
MUP5233: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-277-0267
Cle Dimmobilisation

142770267
520055: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-490-8953
Marteau

144908953
4067 430 000 552: RNCC: 3 | RNVC: 2
F300 0T 000 5234: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-307-0680

5120-14-343-6349
Releve Couple Outil

143436349
330A98-2151-00: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-565-6001
Socket Wrench

145656001
10351 ATP O 100003: RNCC: 3 | RNVC: 2

7 Sep 2010

5120-14-357-3408
Spanner Wrench

143573408
E74-323-30A36: RNCC: 2 | RNVC: 2

7 Jun 1979

5120-14-423-2868
Tap And Reamer Wrench

144232868
1543004: RNCC: 3 | RNVC: 2
2801026: RNCC: 5 | RNVC: 2
91618922: RNCC: 5 | RNVC: 2

14 Apr 1988

5120-14-505-9352
Bearing And Bushing Inserter And Remover

145059352
K117120E: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-372-0229

5120-14-241-6024

5120-14-219-2165

5120-14-371-6952
Socket Head Screw Key

143716952
DE037159: RNCC: 3 | RNVC: 2
DE037159: RNCC: 5 | RNVC: 9

5 Aug 1981

5120-14-427-6939
Pliers

144276939
BRCI2: RNCC: 3 | RNVC: 2

4 Nov 1988

5120-14-458-6831
Valve Spring Lifter

144586831
572194: RNCC: 3 | RNVC: 2

29 Oct 1992

5120-14-225-2019
Pincebloque

142252019
4238F2: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-552-7598
Flat Tip Screwdriver

145527598
AGH.10X175: RNCC: 3 | RNVC: 2
3148510058627: RNCC: 5 | RNVC: 2
AGH.10X175: RNCC: 5 | RNVC: 2

30 Jan 2007

5120-14-222-7396
Open End Wrench

142227396
20-4X5: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-471-2470
Screwdriver Bit Holder

144712470
45285463: RNCC: 3 | RNVC: 2
62000487: RNCC: 3 | RNVC: 2
45285463: RNCC: 5 | RNVC: 9

10 Aug 1994

5120-14-515-0058
Open End Wrench

145150058
D69999400000: RNCC: 3 | RNVC: 2

28 Jun 1999

5120-14-264-9572
Spanner Wrench

142649572
0233-78: RNCC: 3 | RNVC: 2
RA233: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-370-3297
Mechanical Puller Attachment

143703297
5000602426: RNCC: 3 | RNVC: 2
5000602426: RNCC: 5 | RNVC: 9

18 May 1981

5120-14-524-5939
Open End Wrench

145245939
10542717: RNCC: 3 | RNVC: 2

29 Mar 2001

5120-14-459-4810
Socket Head Screw Key

144594810
3429849: RNCC: 3 | RNVC: 2
RAR1939: RNCC: 5 | RNVC: 2

9 Dec 1992

5120-14-406-7839
Spanner Wrench

144067839
TZ689: RNCC: 3 | RNVC: 2
TZ689: RNCC: 5 | RNVC: 9

8 Jan 1986

5120-14-010-1228
Mechanical Puller Attachment

140101228
8000302003: RNCC: 3 | RNVC: 2
8810253003: RNCC: 5 | RNVC: 2

1 Jan 1961

5120-14-438-2578
Screwdriver Bit

144382578
0023940: RNCC: 3 | RNVC: 2
ENT.208: RNCC: 5 | RNVC: 2

12 Mar 1990

5120-14-514-2299
Outllage Manutentio

145142299
26145907591: RNCC: 3 | RNVC: 2

30 Apr 1999

5120-14-347-3441

5120-14-227-3432

5120-14-248-7509
Embout Special

142487509
M2059: RNCC: 3 | RNVC: 2
85-630-0951: RNCC: 6 | RNVC: 9

1 Jan 1968

5120-14-274-8692
Extenseur Ensemble

142748692
33537A: RNCC: 3 | RNVC: 2
33537: RNCC: 5 | RNVC: 2
R31674-12-18R29: RNCC: 5 | RNVC: 2

1 Jan 1971

5120-14-561-1776
Socket Wrench

145611776
92A.8: RNCC: 3 | RNVC: 2
3148516629012: RNCC: 5 | RNVC: 2
662901: RNCC: 5 | RNVC: 2

23 Jun 2009

5120-14-435-7573
Outil Maintenance B

144357573
PV12276: RNCC: 3 | RNVC: 2
0882428P00: RNCC: 5 | RNVC: 2

22 Nov 1989

5120-14-219-3653
Cle Bouchon De Bach

142193653
4-43882: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-362-7427
Fausse Fusee Roue A

143627427
PR46577: RNCC: 3 | RNVC: 2

19 Mar 1980

5120-14-401-2492
Cle A Fourch Embout

144012492
D020: RNCC: 3 | RNVC: 2

5 Jun 1985

5120-14-265-9590
Outil D'installatio

142659590
380306-4: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-219-3650
Cle A Carre Femelle

142193650
90398: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-242-9426
Outil De Sertissage

5120-14-375-9859
Socket Head Screw Key

143759859
990321: RNCC: 3 | RNVC: 2
990321: RNCC: 5 | RNVC: 9

30 Mar 1982

5120-14-548-1329
Screwdriver Bit

145481329
EH.608: RNCC: 3 | RNVC: 2

12 Dec 2005

5120-14-454-1542
Screwdriver Bit

144541542
ENX.227: RNCC: 3 | RNVC: 2
3148510239873: RNCC: 5 | RNVC: 2
0023987: RNCC: 5 | RNVC: 9

24 Mar 1992

5120-14-472-4600
Handling Tool Arm

144724600
1SH41539020: RNCC: 3 | RNVC: 2

26 Oct 1994

5120-14-456-8221
Bearing And Bushing Inserter And Remover

144568221
45057936: RNCC: 3 | RNVC: 2
45057936: RNCC: 5 | RNVC: 9

24 Jul 1992

5120-14-305-3296
Fixed Open End Wrench Set

143053296
22.JU5T: RNCC: 3 | RNVC: 2
22JU5T: RNCC: 5 | RNVC: 2
3148515275500: RNCC: 5 | RNVC: 2
FACOM 22JU5T: RNCC: 5 | RNVC: 2
0527550: RNCC: 5 | RNVC: 9
958 234 000 001: RNCC: 6 | RNVC: 9

1 Jan 1974

5120-14-304-6347
Manual Impact Wrench

143046347
NK.300: RNCC: 3 | RNVC: 2
3148515095184: RNCC: 5 | RNVC: 2
NK300: RNCC: 5 | RNVC: 2
0509518: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-363-0033
Spanner Wrench

143630033
213186: RNCC: 3 | RNVC: 2

3 Apr 1980

5120-14-476-3284
Retaining Ring Pliers

144763284
497.32: RNCC: 3 | RNVC: 2
497A: RNCC: 5 | RNVC: 2

7 Jun 1995

5120-14-451-7783
Seal Inserter And Remover

144517783
600055: RNCC: 3 | RNVC: 2

4 Dec 1991

5120-14-532-9631
Socket Wrench Socket Set

145329631
RF.40E: RNCC: 3 | RNVC: 2

14 Jan 2003

5120-14-488-8730
Torque Wrench Adapter

144888730
SDP.30: RNCC: 3 | RNVC: 2
SDP30: RNCC: 5 | RNVC: 2

11 Jun 1997

5120-14-449-7308
Bearing And Bushing Inserter And Remover

144497308
F117158: RNCC: 3 | RNVC: 2
45057838: RNCC: 5 | RNVC: 2

4 Sep 1991

5120-14-441-1868
Detent Handling Tool

144411868
16741067: RNCC: 3 | RNVC: 2

22 Aug 1990

5120-14-238-6757
Spanner Wrench

142386757
E74323A11AGW: RNCC: 2 | RNVC: 2

1 Jan 1967

5120-14-462-3765
Spanner Wrench

144623765
BLC23074: RNCC: 3 | RNVC: 2

15 Apr 1993

5120-14-375-8481

5120-14-486-5658
Montage D'alesage

144865658
RT15002: RNCC: 3 | RNVC: 2

25 Mar 1997

5120-14-436-0256
Preformed Packing Inserter

144360256
RT30071: RNCC: 3 | RNVC: 2

29 Nov 1989

5120-14-353-9393

5120-14-231-9965

5120-14-318-6464
Bague Fendue

143186464
0M97230: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-471-0843
Cle Pour Ecrou Ipd

144710843
3424550: RNCC: 3 | RNVC: 2
RAB3416: RNCC: 5 | RNVC: 2

26 Jul 1994

5120-14-362-7516

5120-14-490-8888
Filiere

144908888
4067 170 000 414: RNCC: 3 | RNVC: 2
F300 0T 000 5160: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-269-4936
Positionneur Equipe

142694936
15665: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-412-8211
Spanner Wrench

144128211
0481-200020: RNCC: 3 | RNVC: 2

5 Nov 1986

5120-14-447-7205
Bearing Staking Installation Tool

144477205
729125: RNCC: 3 | RNVC: 2
SKF729125: RNCC: 5 | RNVC: 9

29 May 1991

5120-14-208-0782

5120-14-567-0400
Box Wrench

145670400
55A.34X36: RNCC: 3 | RNVC: 2
3148516991065: RNCC: 5 | RNVC: 2
699106: RNCC: 5 | RNVC: 2

1 Feb 2011

5120-14-476-8775
Craftsman's Tweezers

144768775
150.P11: RNCC: 3 | RNVC: 2
3148511384800: RNCC: 5 | RNVC: 2
5412301L00: RNCC: 5 | RNVC: 2
0138480: RNCC: 5 | RNVC: 9

5 Jul 1995

5120-14-321-1515
Open End Wrench

143211515
10-37X39: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-340-8824
Spanner Wrench

143408824
825625A: RNCC: 3 | RNVC: 2

14 Feb 1977

5120-14-431-1209
Open End Wrench

144311209
522C46X50: RNCC: 3 | RNVC: 9
DEM522C46X50: RNCC: 5 | RNVC: 9

5 Apr 1989

5120-14-040-7669
Screwdriver Bit

140407669
1020-8B: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-517-1628
Spanner Wrench

145171628
Z11100010: RNCC: 3 | RNVC: 2

10 Nov 1999

5120-14-324-1983
Open End Wrench

143241983
3000175: RNCC: 3 | RNVC: 2
VIR3000175: RNCC: 5 | RNVC: 9

1 Jan 1975

5120-14-538-8820
Socket Head Screw Key

145388820
NGM0022030200493: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-503-0937
Mechanical Puller Attachment

145030937
015022040000: RNCC: 3 | RNVC: 2

7 Jan 1998

5120-14-310-8178
Electronic Equipment Alignment Tool

143108178
B63399A0002X000: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-299-8166
Spanner Wrench

142998166
000MA0595REP6: RNCC: 3 | RNVC: 2
000MA595REP6: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-220-7923
Open End Wrench

142207923
RACC20: RNCC: 3 | RNVC: 2
RACC20: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-438-9848
Dispositif Mesure J

144389848
9689160324: RNCC: 3 | RNVC: 2

11 Apr 1990

5120-14-446-9380
Cle A Douille

144469380
2-45251: RNCC: 3 | RNVC: 2

17 Apr 1991

5120-14-427-0931
Spanner Wrench

144270931
540323: RNCC: 3 | RNVC: 2

6 Oct 1988

5120-14-281-9212

5120-14-261-9240
Cle Pour Connecteur

142619240
4075-100B076: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-537-3836
Cale A Poncer

145373836
1247M3001: RNCC: 3 | RNVC: 2

3 Nov 2003

5120-14-421-3515
Spanner Wrench

144213515
540249: RNCC: 3 | RNVC: 2

14 Jan 1988

5120-14-451-1157
Bearing And Bushing Inserter And Remover

144511157
45057862: RNCC: 3 | RNVC: 2
45057862: RNCC: 5 | RNVC: 9

30 Oct 1991

5120-14-422-2354
Socket Head Screw Key

144222354
0373-0U115065: RNCC: 3 | RNVC: 2

24 Feb 1988

5120-14-441-2005
Terminal Crimping Tool Contact Positioner

144412005
R073040002: RNCC: 3 | RNVC: 2
91711064: RNCC: 5 | RNVC: 2
73040002: RNCC: 5 | RNVC: 9

22 Aug 1990

5120-14-489-0323
Combination Box And Open End Wrench

144890323
39.15: RNCC: 3 | RNVC: 2
3148510998862: RNCC: 5 | RNVC: 2
0099886: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-522-3855
Bearing Staking Installation Tool

145223855
TC3251G001: RNCC: 3 | RNVC: 2

25 Oct 2000

5120-14-329-9307
Screwdriver Bit

143299307
AAM.2: RNCC: 3 | RNVC: 2
3148510023007: RNCC: 5 | RNVC: 2
AAM2: RNCC: 5 | RNVC: 2
0002300: RNCC: 5 | RNVC: 9

2 Jul 1975

5120-14-446-9378
Cle A Tube

144469378
2-45846: RNCC: 3 | RNVC: 2

17 Apr 1991

5120-14-220-7912
Open End Wrench

142207912
RACD28: RNCC: 3 | RNVC: 2
RACD28: RNCC: 5 | RNVC: 9

1 Jan 1965

5120-14-461-6483
Sup. Demi-Couronne

144616483
PL1DA002OR901005B: RNCC: 3 | RNVC: 2

19 Mar 1993

5120-14-306-3506

5120-14-270-5822

5120-14-424-4908
Mechanical Puller Attachment

144244908
15163017: RNCC: 3 | RNVC: 2

19 May 1988

5120-14-299-6501
Screw Thread Insert Inserter

142996501
01500516400: RNCC: 3 | RNVC: 2
32071670: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-367-2031
Spanner Wrench

143672031
RT13885: RNCC: 3 | RNVC: 2

11 Dec 1980

5120-14-483-4272
Socket Wrench Screwdriver Attachment

144834272
JX.40: RNCC: 3 | RNVC: 2
0715 123 40: RNCC: 5 | RNVC: 2
0506620: RNCC: 5 | RNVC: 2
3148515066207: RNCC: 5 | RNVC: 2
1121731M00: RNCC: 5 | RNVC: 2

12 Sep 1996

5120-14-518-0864
Open End Wrench

145180864
8018716R00: RNCC: 3 | RNVC: 2

26 Jan 2000

5120-14-421-8223
Socket Wrench Socket

144218223
3215524: RNCC: 3 | RNVC: 2

27 Jan 1988

5120-14-338-0729
Terminal Crimping Tool Contact Positioner

143380729
R282992: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-425-9506
Sleeve Stretching Pliers

144259506
500146LT0P7R2: RNCC: 3 | RNVC: 2

28 Jul 1988

5120-14-402-0135
Spanner Wrench

144020135
199400: RNCC: 3 | RNVC: 2

26 Jun 1985

5120-14-512-1559
Flat Tip Screwdriver Set

145121559
AEF.J2: RNCC: 3 | RNVC: 2

4 Feb 1999

5120-14-291-8160
Socket Wrench Socket

142918160
NK19: RNCC: 3 | RNVC: 2
3148510365008: RNCC: 5 | RNVC: 2
0714 14 02: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-475-6299
Socket Wrench Socket

144756299
0801188T01: RNCC: 3 | RNVC: 2

21 Apr 1995

5120-14-530-9198
Socket Wrench Spanner Attachment Set

145309198
118.EC4: RNCC: 3 | RNVC: 2
134115: RNCC: 3 | RNVC: 2
3148511341155: RNCC: 5 | RNVC: 2

17 Jul 2002

5120-14-348-5094

5120-14-471-0856
Cle Pour Barillet

144710856
3424556: RNCC: 3 | RNVC: 2
RAB3422: RNCC: 5 | RNVC: 2

27 Jul 1994

5120-14-251-1131
Cle A Ergot

142511131
202404: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-559-9541
Hand Hammer

145599541
200H.26: RNCC: 3 | RNVC: 2
200A.26: RNCC: 5 | RNVC: 9

9 Mar 2009

5120-14-448-5546
Outil Mont Cylindre

144485546
Z204808: RNCC: 3 | RNVC: 2

1 Jul 1991

5120-14-225-4001

5120-14-318-2189

5120-14-578-5186
El Thermal Stripper

145785186
PB150M: RNCC: 3 | RNVC: 2

6 Dec 2013

5120-14-237-3716
Extracteur

142373716
H90R1006: RNCC: 3 | RNVC: 2
530518: RNCC: 5 | RNVC: 2
H90R1006: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-236-8769
Spanner Wrench

142368769
0761-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-286-7834

5120-14-532-3266
Flat Tip Screwdriver

145323266
AY.8X200VE: RNCC: 3 | RNVC: 2
3148510130569: RNCC: 5 | RNVC: 2
AY.8X200VSE: RNCC: 5 | RNVC: 9

30 Oct 2002

5120-14-459-9272
Outil Montage Couss

144599272
26545906500: RNCC: 3 | RNVC: 2
N520273: RNCC: 5 | RNVC: 2

4 Jan 1993

5120-14-313-7233
Face Spanner Wrench Socket

143137233
C47040: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-489-0305
Socket Head Screw Key

144890305
89.10L: RNCC: 3 | RNVC: 2
3148511268704: RNCC: 5 | RNVC: 2
0126870: RNCC: 5 | RNVC: 9

18 Jun 1997

5120-14-343-1858
Poussoir De Securit

143431858
199804: RNCC: 3 | RNVC: 2

16 Jun 1977

5120-14-292-7640
Cle Speciale

142927640
AXM002: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-228-5932

5120-14-488-5591
Cantilever Jaw Clamp

144885591
271A.100: RNCC: 3 | RNVC: 2
271A100: RNCC: 5 | RNVC: 2
0162661: RNCC: 5 | RNVC: 2
3148511626610: RNCC: 5 | RNVC: 2
2695 415 100: RNCC: 5 | RNVC: 2

21 May 1997

5120-14-316-5019
Spanner Wrench

143165019
0U50107: RNCC: 3 | RNVC: 2
50107: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-393-0305
Open End Wrench

143930305
10-14X16CP: RNCC: 3 | RNVC: 2

12 Apr 1984

5120-14-358-3647
Slip Joint Pliers

143583647
901CI165: RNCC: 3 | RNVC: 9
DEM901CI165: RNCC: 5 | RNVC: 9

13 Aug 1979

5120-14-274-5307

5120-14-279-8373

5120-14-355-6812
Screwdriver Bit Set And Handle

143556812
NS.263M: RNCC: 3 | RNVC: 2
2695 240 101: RNCC: 5 | RNVC: 2
3148515103704: RNCC: 5 | RNVC: 2
NS263M: RNCC: 5 | RNVC: 2
0510370: RNCC: 5 | RNVC: 9

19 Mar 1979

5120-14-424-6730
Detent Handling Tool

144246730
530528: RNCC: 3 | RNVC: 2

2 Jun 1988

5120-14-222-7379
Open End Wrench

142227379
10-28X30: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-264-9587
Spanner Wrench

142649587
0317-78: RNCC: 3 | RNVC: 2
RA317: RNCC: 5 | RNVC: 2

1 Jan 1970

5120-14-538-4666
Spanner Wrench

145384666
NGM0010037723516: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-220-8513
Spanner Wrench

142208513
M115769: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-247-9629
Douille De Cle A Do

142479629
RT20791: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-538-8483
Preformed Packing Remover

145388483
NGM0021020400007: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-248-3512

5120-14-281-1908
Spanner Wrench

142811908
4647: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-493-7658
Spanner Wrench

144937658
BLC23145: RNCC: 3 | RNVC: 2
F300 0T 013 9696: RNCC: 6 | RNVC: 9

15 Oct 1997

5120-14-505-9269
Mechanical Puller Attachment

145059269
H117186A: RNCC: 3 | RNVC: 2

30 Mar 1998

5120-14-489-4327
Spanner Wrench

144894327
26-531: RNCC: 3 | RNVC: 2

23 Jul 1997

5120-14-275-8974
Mattock

142758974
4751: RNCC: 3 | RNVC: 9

1 Jan 1971

5120-14-539-3154
Mechanical Puller Step Plate

145393154
T651G3006121: RNCC: 3 | RNVC: 2

22 Dec 2003

5120-14-278-9588
Spanner Wrench

142789588
DNAR508REPB40: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-266-6693

5120-14-566-7457
Caulking Gun

145667457
ARALDITE 2000 ECON GUN 50ML: RNCC: 3 | RNVC: 2
FH152968 200: RNCC: 5 | RNVC: 2

14 Dec 2010

5120-14-398-1451
Montage Cone

143981451
F46738: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-401-7223
Hand Terminal Crimping Tool

144017223
F136N0001: RNCC: 3 | RNVC: 2
F136N0001: RNCC: 5 | RNVC: 9

13 Jun 1985

5120-14-527-4981
Plug Electrical Connector Extractor

145274981
0UT136A: RNCC: 3 | RNVC: 2
OUT136A: RNCC: 5 | RNVC: 2

30 Oct 2001

5120-14-292-7641
Tournevis Special

142927641
AXM003: RNCC: 3 | RNVC: 2

1 Jan 1972

5120-14-485-1558
Open End Wrench

144851558
M412100A2333A01: RNCC: 3 | RNVC: 2

10 Jan 1997

5120-14-280-4129
Pince Rabatre Frein

142804129
C48927: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-286-7851

5120-14-304-3161
Bague Demmanchement

143043161
161-22304J: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-405-2311
Percussi Demont Cle

144052311
099000J: RNCC: 3 | RNVC: 2

27 Nov 1985

5120-14-261-7655

5120-14-323-4409

5120-14-228-5215

5120-14-419-7708
Spanner Wrench

144197708
68920-500-2: RNCC: 3 | RNVC: 2
68920-500-1: RNCC: 5 | RNVC: 9
68920-500-2: RNCC: 5 | RNVC: 9

5 Nov 1987

5120-14-216-6732
Open End Wrench

142166732
E74301C12AGL: RNCC: 2 | RNVC: 2
69-12CA: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-517-3835
Solid Center Punch

145173835
0XB501-108-713-05: RNCC: 3 | RNVC: 2

8 Dec 1999

5120-14-564-8582
Mechanical Puller

145648582
888-379-600-2: RNCC: 3 | RNVC: 2

11 Jun 2010

5120-14-343-1822
Pose Filet R Broche

143431822
01500608020: RNCC: 3 | RNVC: 2
01556080010: RNCC: 5 | RNVC: 2
01500608020: RNCC: 5 | RNVC: 2

16 Jun 1977

5120-14-234-4243
Cle Pour Vis Creuse

142344243
301734T: RNCC: 3 | RNVC: 2
17926T1REP1: RNCC: 5 | RNVC: 2

1 Jan 1967

5120-14-272-3578

5120-14-223-8179

5120-14-344-3809

5120-14-232-6823
Hand Terminal Crimping Tool

142326823
59070: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-541-9007
Detent Handling Tool

145419007
46825909AA: RNCC: 3 | RNVC: 2

2 Jul 2004

5120-14-260-9718
Torque Wrench Adapter

142609718
09-17: RNCC: 3 | RNVC: 2

1 Jan 1970

5120-14-522-2434
Mechanical Puller Set

145222434
TC3036G001: RNCC: 3 | RNVC: 2

11 Oct 2000

5120-14-457-4373
Bearing And Bushing Remover

144574373
45057970: RNCC: 3 | RNVC: 2
45057970: RNCC: 5 | RNVC: 9

3 Sep 1992

5120-14-471-9896
Flat Tip Screwdriver

144719896
AGT.8X100: RNCC: 3 | RNVC: 2
AGT.8X100: RNCC: 5 | RNVC: 2
3148510059013: RNCC: 5 | RNVC: 2
AGT8X100: RNCC: 5 | RNVC: 2
0005901: RNCC: 5 | RNVC: 9

28 Sep 1994

5120-14-040-4685
Spanner Wrench

140404685
23989: RNCC: 3 | RNVC: 2
23989: RNCC: 5 | RNVC: 2

1 Jan 1972

5120-14-263-8181

5120-14-486-4462
Outillage De C

144864462
RT13631: RNCC: 3 | RNVC: 2

21 Mar 1997

5120-14-554-3063
Pliers

145543063
61933350AA: RNCC: 3 | RNVC: 2

20 Jun 2007

5120-14-491-0220
Manchon

144910220
4602 011 300 010: RNCC: 3 | RNVC: 2
F300 0T 001 1015: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-491-0135
Cle

144910135
4602 007 200 068: RNCC: 3 | RNVC: 2
F300 0T 001 0921: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-347-8668

5120-14-241-6041

5120-14-441-4782
Clamp Base Bench Vise

144414782
06214000: RNCC: 3 | RNVC: 2

29 Aug 1990

5120-14-472-2284
Socket Head Screw Key

144722284
10093663: RNCC: 3 | RNVC: 2

12 Oct 1994

5120-14-468-5213
Bearing And Bushing Inserter

144685213
45057469: RNCC: 3 | RNVC: 2
45057469: RNCC: 5 | RNVC: 9

3 Mar 1994

5120-14-474-3015
Combination Box And Open End Wrench Set

144743015
39.JE10T: RNCC: 3 | RNVC: 2
3148515282324: RNCC: 5 | RNVC: 2
1011829D00: RNCC: 5 | RNVC: 2
0528232: RNCC: 5 | RNVC: 9

8 Feb 1995

5120-14-538-2453
Spanner Wrench

145382453
NGM0010033753532: RNCC: 2 | RNVC: 2

9 Dec 2003

5120-14-314-8617
Bloc Pre-Sertissage

143148617
PS30K: RNCC: 3 | RNVC: 2

1 Jan 1974

5120-14-253-9724
Cone De Guidage

142539724
C46279: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-248-1278
Torque Wrench Adapter

142481278
19-23: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-513-3266
Hand Hose Fitting Swaging Tool Kit

145133266
MEHT: RNCC: 3 | RNVC: 2

15 Mar 1999

5120-14-279-7186
Craftsman's Tweezers

142797186
TDCCM1BIS168: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-272-8635
Communications Equipment Spring Adjuster

142728635
S1110: RNCC: 3 | RNVC: 2
S1110: RNCC: 5 | RNVC: 9

1 Jan 1971

5120-14-493-3447
Cle

144933447
0411-60221: RNCC: 3 | RNVC: 2
F300 0T 012 4873: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-325-0285
Bloc De Main Corps

143250285
0S21458: RNCC: 3 | RNVC: 2

2 Jul 1975

5120-14-218-8822

5120-14-571-7350
Screwdriver Bit

145717350
NEV-3-3: RNCC: 3 | RNVC: 2

26 Apr 2012

5120-14-444-9091
Outil Deconnexion

144449091
0446492P00: RNCC: 3 | RNVC: 2

28 Jan 1991

5120-14-307-4721
Screwdriver Bit

143074721
506-3: RNCC: 3 | RNVC: 9
506N3: RNCC: 5 | RNVC: 2
MUL506-3: RNCC: 5 | RNVC: 9

1 Jan 1974

5120-14-357-5833
Wrench Kit

143575833
8810241000: RNCC: 3 | RNVC: 2

7 Jun 1979

5120-14-202-2380
Stakeholder Bench Plate

142022380
STANDDET0LIERN1: RNCC: 3 | RNVC: 2

1 Jan 1963

5120-14-378-3149
Enleve Culasse

5120-14-381-5980

5120-14-264-7889
Des Forgeron Etampe

5120-14-268-8609
Clavette Marteau Bo

5120-14-516-7993
Poussoir

145167993
5001008860: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-380-0325

5120-14-552-8508
Outil D'installatio

145528508
1698-090A589: RNCC: 3 | RNVC: 2

8 Feb 2007

5120-14-341-5802
Socket Wrench Socket

143415802
RT21055: RNCC: 3 | RNVC: 2

16 Mar 1977

5120-14-225-3971

5120-14-575-8847
Pole Extension

145758847
S661V2303102: RNCC: 3 | RNVC: 2

14 May 2013

5120-14-400-6255
Monte Siege Soupape

144006255
DLP752910: RNCC: 3 | RNVC: 2

8 May 1985

5120-14-420-0011
Outil Manutention

144200011
75545912600: RNCC: 3 | RNVC: 2
755459126: RNCC: 5 | RNVC: 9
75545912600: RNCC: 5 | RNVC: 9
772743: RNCC: 5 | RNVC: 9

16 Nov 1987

5120-14-490-1423
Cle Speciale

144901423
94964CA22A: RNCC: 3 | RNVC: 2
RAQ0110: RNCC: 5 | RNVC: 2

17 Sep 1997

5120-14-373-0386

5120-14-561-9480
Torque Wrench Multiplier

145619480
NP.200B: RNCC: 3 | RNVC: 2

18 Sep 2009

5120-14-342-4142
Filets Rapp Rupteur

143424142
01585160000: RNCC: 3 | RNVC: 2
35051614: RNCC: 5 | RNVC: 2

16 May 1977

5120-14-521-6345
Socket Wrench Screwdriver Attachment

145216345
RHC.6: RNCC: 3 | RNVC: 2
0050473: RNCC: 5 | RNVC: 9

30 Aug 2000

5120-14-231-8826
Cle A Ergots Specia

142318826
PR47110: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-387-1389
Protection Chemise

143871389
26545910900: RNCC: 3 | RNVC: 2
265459109: RNCC: 5 | RNVC: 2
265459109: RNCC: 5 | RNVC: 9

24 Aug 1983

5120-14-276-3112

5120-14-241-5245

5120-14-444-7071
Tourillon Cle

144447071
088940Y: RNCC: 3 | RNVC: 2
088 940: RNCC: 5 | RNVC: 9

16 Jan 1991

5120-14-245-1865

5120-14-219-8600

5120-14-399-1110
Cle Moyeux

143991110
5000264052: RNCC: 3 | RNVC: 2

6 Mar 1985

5120-14-416-7662
Mandrin Presse

144167662
540669: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-231-9956
Doitg Darret

142319956
DAT: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-221-8825

5120-14-487-6653
Spanner Wrench

144876653
M419621A1400A01: RNCC: 3 | RNVC: 2

18 Apr 1997

5120-14-308-2241

5120-14-382-7619
Manchon Reducteur

143827619
900093: RNCC: 3 | RNVC: 2

17 Feb 1983

5120-14-398-0313
Spanner Wrench

143980313
101066: RNCC: 3 | RNVC: 2
C66291: RNCC: 5 | RNVC: 2

31 Jan 1985

5120-14-398-6809
Torque Wrench Adapter

143986809
16019050L: RNCC: 3 | RNVC: 2
JD307: RNCC: 3 | RNVC: 2

31 Jan 1985

5120-14-374-0888
Etau Cle

143740888
UHC304-43: RNCC: 3 | RNVC: 2

8 Dec 1981

5120-14-544-9300
Flat Tip Screwdriver

145449300
624010: RNCC: 3 | RNVC: 2

7 Mar 2005

5120-14-456-3055
Open End Wrench

144563055
11115: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-424-5271
Spanner Wrench

144245271
7M487: RNCC: 3 | RNVC: 2

26 May 1988

5120-14-323-4747
Spanner Wrench

143234747
61798: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-449-0141
Seal Inserter And Remover

144490141
76191: RNCC: 3 | RNVC: 2
89280677: RNCC: 5 | RNVC: 2

24 Jul 1991

5120-14-542-4811
Socket Wrench Socket

145424811
8044197T00: RNCC: 3 | RNVC: 2

21 Jul 2004

5120-14-397-4809
Face Spanner Wrench Socket

143974809
224472: RNCC: 3 | RNVC: 2

14 Dec 1984

5120-14-508-7286
Spanner Wrench

145087286
300A91668: RNCC: 3 | RNVC: 2
300A91668: RNCC: 5 | RNVC: 2

29 Sep 1998

5120-14-375-1761
Spanner Wrench

143751761
16380153: RNCC: 3 | RNVC: 2
16380153: RNCC: 5 | RNVC: 9

26 Feb 1982

5120-14-333-8962
Plateau Diviseur

143338962
425-65004-000: RNCC: 3 | RNVC: 2
425-65004-000: RNCC: 5 | RNVC: 2

23 Apr 1976

5120-14-288-6882

5120-14-266-5602

5120-14-417-4882
De Montage Obus

144174882
46AM046A: RNCC: 3 | RNVC: 2
49AM046A: RNCC: 5 | RNVC: 2

8 Jul 1987

5120-14-247-1642
Bloc De Presertissa

142471642
PS10K: RNCC: 3 | RNVC: 2
P4PS10K: RNCC: 5 | RNVC: 2

1 Jan 1968

5120-14-266-9801
Socket Head Screw Key

142669801
NO PRIMARY REF14-266-9801: RNCC: 3 | RNVC: 2
104536: RNCC: 5 | RNVC: 9

1 Jan 1970

5120-14-559-2245
Socket Head Screw Key

145592245
7421045534: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-559-2250
Combination Box And Open End Wrench

145592250
7421063421: RNCC: 3 | RNVC: 2

15 Dec 2008

5120-14-319-9702
Electrical Contact Remover

143199702
1271: RNCC: 3 | RNVC: 2
844244: RNCC: 5 | RNVC: 2
844244: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-316-1605
Outi Position Levie

143161605
A129950: RNCC: 3 | RNVC: 2
100306: RNCC: 5 | RNVC: 2
100317: RNCC: 5 | RNVC: 2

1 Jan 1975

5120-14-454-6515
A Main Marteau

5120-14-456-3061
Mandrin Pour Connec

144563061
11167: RNCC: 3 | RNVC: 2

25 Jun 1992

5120-14-371-2214

5120-14-516-8051
Poussoir

145168051
5001008880: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-264-0584

5120-14-573-7159
Socket Head Screw Key

145737159
83S.2L: RNCC: 3 | RNVC: 2
124893: RNCC: 5 | RNVC: 2
3148511248935: RNCC: 5 | RNVC: 2

6 Nov 2012

5120-14-572-8447
Socket Wrench Socket

145728447
320014: RNCC: 3 | RNVC: 2
7612206014762: RNCC: 5 | RNVC: 2

13 Aug 2012

5120-14-488-6847
Palie Serrage Outil

144886847
287073830: RNCC: 3 | RNVC: 2
F300 0T 018 9337: RNCC: 6 | RNVC: 9

28 May 1997

5120-14-247-3712
Broche Speciale

142473712
PR47569: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-317-0461
Pince De Bridage

143170461
RT5801: RNCC: 3 | RNVC: 2

1 Jan 1975

5120-14-217-2011

5120-14-217-3634

5120-14-227-7215
Collier De Demontag

142277215
959066: RNCC: 3 | RNVC: 2

1 Jan 1966

5120-14-241-1518
Cle A Ergots Specia

142411518
0776-78: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-414-9672
Rotating Members Aligning Tool

144149672
253532: RNCC: 3 | RNVC: 2

26 Mar 1987

5120-14-437-2016
Clapet Supp Broche

144372016
095116M: RNCC: 3 | RNVC: 2

23 Jan 1990

5120-14-574-5029
Socket Wrench Socket

145745029
NS.26A: RNCC: 3 | RNVC: 2
3148516548481: RNCC: 5 | RNVC: 2
654848: RNCC: 5 | RNVC: 2

24 Jan 2013

5120-14-220-8510

5120-14-293-7564

5120-14-339-1373
Outillage Blocage

143391373
7080A: RNCC: 3 | RNVC: 2

17 Dec 1976

5120-14-490-8682
Meche

144908682
4057 020 003 462: RNCC: 3 | RNVC: 2
F300 0T 000 4920: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-528-0866
Pose Ecrou

145280866
139676: RNCC: 3 | RNVC: 2

14 Dec 2001

5120-14-253-3680
Levier Pour Palier

142533680
410231M1: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-297-1111
Face Spanner Wrench Socket

142971111
542125C: RNCC: 3 | RNVC: 2
363A55-100000-0000: RNCC: 5 | RNVC: 2
542125: RNCC: 5 | RNVC: 2
542125C: RNCC: 5 | RNVC: 2

1 Jan 1973

5120-14-509-4539

5120-14-395-4411
Cle Tubulaire 35Mm

143954411
3-19112: RNCC: 3 | RNVC: 2

25 Oct 1984

5120-14-490-6843
Drill

144906843
240 D 00708 000: RNCC: 3 | RNVC: 2
F300 0T 000 0947: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-415-0674
Cle A Ergots

5120-14-322-5923

5120-14-573-6480
Socket Wrench

145736480
116239: RNCC: 3 | RNVC: 2

29 Oct 2012

5120-14-280-4144
Cle Douille Fourche

142804144
364667: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-428-6081
Dextraction Poignee

144286081
20664133: RNCC: 3 | RNVC: 2

8 Dec 1988

144923833
5000263034: RNCC: 3 | RNVC: 2
F300 0T 007 5110: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-516-8010
Poussoir

145168010
5001008737: RNCC: 3 | RNVC: 2

18 Oct 1999

5120-14-252-3363
Face Spanner Wrench Socket

142523363
PR27270: RNCC: 3 | RNVC: 2

1 Jan 1968

5120-14-239-5211

5120-14-490-6852
Drill

144906852
240 D 01016 000: RNCC: 3 | RNVC: 2
F300 0T 000 0956: RNCC: 6 | RNVC: 9

8 Oct 1997

5120-14-345-9138

5120-14-268-0299

5120-14-234-3310

5120-14-360-2464
Cle Mont-Dem Radome

143602464
S3Z50019010: RNCC: 3 | RNVC: 2

23 Nov 1979

5120-14-387-8712
Compres Resso Outil

143878712
OU50388: RNCC: 3 | RNVC: 2
0U50388: RNCC: 5 | RNVC: 2

21 Feb 1996

5120-14-567-0451
Cross Tip Screwdriver

145670451
AWPH3X150: RNCC: 3 | RNVC: 2
3148517742840: RNCC: 5 | RNVC: 2
774284: RNCC: 5 | RNVC: 2

2 Feb 2011

5120-14-347-8709

5120-14-370-4877
Butee Sertissage

143704877
60440: RNCC: 3 | RNVC: 2

18 May 1981

5120-14-228-5184

5120-14-563-7750
Six Point Tip Screwdriver

145637750
ASX15X75: RNCC: 3 | RNVC: 2
0772810: RNCC: 5 | RNVC: 2
3148517728103: RNCC: 5 | RNVC: 2

12 Mar 2010

5120-14-222-1368

5120-14-572-7657
Cross Tip Screwdriver

145727657
ANP2X400: RNCC: 3 | RNVC: 2
773409: RNCC: 5 | RNVC: 2
3148517734098: RNCC: 5 | RNVC: 2

31 Jul 2012

5120-14-479-3026
Cle Reservoir

144793026
0249727090: RNCC: 3 | RNVC: 2

9 Jan 1996

5120-14-434-9251
Face Spanner Wrench Socket

144349251
3511 191 64611: RNCC: 3 | RNVC: 2

10 Oct 1989

5120-14-219-2217
Outil A Sertir Pour

142192217
98082: RNCC: 3 | RNVC: 2

1 Jan 1965

5120-14-333-3378

5120-14-327-0995
Appui-Cric

143270995
C22216: RNCC: 3 | RNVC: 2
330A91-0042-00: RNCC: 5 | RNVC: 2

2 Jul 1975

5120-14-440-8055
Spanner Wrench

144408055
Y075-039-100B: RNCC: 3 | RNVC: 2

25 Jul 1990

5120-14-341-5354
Embout Controle

143415354
DF57-771-00-8091: RNCC: 3 | RNVC: 2
FG771-00-8091: RNCC: 5 | RNVC: 2
91622083: RNCC: 5 | RNVC: 2

16 Mar 1977

5120-14-561-1341
Open End Wrench

145611341
3148517949126: RNCC: 3 | RNVC: 2
MODM.440-2: RNCC: 3 | RNVC: 2
MODM.40-2: RNCC: 3 | RNVC: 9
3148517933118: RNCC: 5 | RNVC: 2
794912: RNCC: 5 | RNVC: 2

18 Jun 2009

5120-14-552-4019
Combination Box And Open End Wrench

145524019
61931633AA: RNCC: 3 | RNVC: 2

19 Dec 2006

5120-14-280-2744
Spanner Wrench

142802744
2-08997: RNCC: 3 | RNVC: 2

1 Jan 1971

5120-14-241-0267
Cle Speciale

142410267
202449: RNCC: 3 | RNVC: 2

1 Jan 1967

5120-14-416-7607
Controle Outil

144167607
537465: RNCC: 3 | RNVC: 2

25 Jun 1987

5120-14-214-2906

5120-14-338-4679
Extracteur Axe

143384679
PR47257: RNCC: 3 | RNVC: 2

6 Nov 1976

5120-14-252-5611

5120-14-283-1401

5120-14-314-6428

5120-14-490-6888
Drill

144906888
240 D 01884 016: RNCC: 3 | RNVC: 2
F300 0T 000 0997: RNCC: 6 | RNVC: 9

8 Oct 1997

Load More Results